/* * Copyright (c) 2022, sakumisu * Copyright (c) 2022-2025, HPMicro * * SPDX-License-Identifier: Apache-2.0 */ #ifndef CHERRYUSB_CONFIG_H #define CHERRYUSB_CONFIG_H #include "board.h" /* ================ USB common Configuration ================ */ #ifdef __RTTHREAD__ #include #define CONFIG_USB_PRINTF(...) rt_kprintf(__VA_ARGS__) #else #define CONFIG_USB_PRINTF(...) printf(__VA_ARGS__) #endif #ifndef CONFIG_USB_DBG_LEVEL #define CONFIG_USB_DBG_LEVEL USB_DBG_INFO #endif #if defined(CONFIG_USB_DEVICE_FS) || defined(CONFIG_USB_DEVICE_FORCE_FULL_SPEED) #undef CONFIG_USB_HS #else #define CONFIG_USB_HS #endif /* Enable print with color */ #define CONFIG_USB_PRINTF_COLOR_ENABLE /* #define CONFIG_USB_DCACHE_ENABLE */ /* data align size when use dma or use dcache */ #ifdef CONFIG_USB_DCACHE_ENABLE #define CONFIG_USB_ALIGN_SIZE HPM_L1C_CACHELINE_SIZE #else #define CONFIG_USB_ALIGN_SIZE 4 #endif /* descriptor common define */ #define USBD_VID 0x34B7 /* HPMicro VID */ #define USBD_PID 0xFFFF #define USBD_MAX_POWER 200 /* attribute data into no cache ram */ #define USB_NOCACHE_RAM_SECTION __attribute__((section(".noncacheable.non_init"))) /* use usb_memcpy default for high performance but cost more flash memory. * And, arm libc has a bug that memcpy() may cause data misalignment when the size is not a multiple of 4. */ /* #define CONFIG_USB_MEMCPY_DISABLE */ /* ================= USB Device Stack Configuration ================ */ /* Ep0 in and out transfer buffer */ #ifndef CONFIG_USBDEV_REQUEST_BUFFER_LEN #define CONFIG_USBDEV_REQUEST_BUFFER_LEN 512 #endif /* Setup packet log for debug */ /* #define CONFIG_USBDEV_SETUP_LOG_PRINT */ /* Send ep0 in data from user buffer instead of copying into ep0 reqdata * Please note that user buffer must be aligned with CONFIG_USB_ALIGN_SIZE */ /* #define CONFIG_USBDEV_EP0_INDATA_NO_COPY */ /* Check if the input descriptor is correct */ /* #define CONFIG_USBDEV_DESC_CHECK */ /* Enable test mode */ #define CONFIG_USBDEV_TEST_MODE /* enable advance desc register api */ #define CONFIG_USBDEV_ADVANCE_DESC /* move ep0 setup handler from isr to thread */ /* #define CONFIG_USBDEV_EP0_THREAD */ #ifndef CONFIG_USBDEV_EP0_PRIO #define CONFIG_USBDEV_EP0_PRIO 4 #endif #ifndef CONFIG_USBDEV_EP0_STACKSIZE #define CONFIG_USBDEV_EP0_STACKSIZE 2048 #endif #ifndef CONFIG_USBDEV_MSC_MAX_LUN #define CONFIG_USBDEV_MSC_MAX_LUN 1 #endif #ifndef CONFIG_USBDEV_MSC_MAX_BUFSIZE #define CONFIG_USBDEV_MSC_MAX_BUFSIZE 512 #endif #ifndef CONFIG_USBDEV_MSC_MANUFACTURER_STRING #define CONFIG_USBDEV_MSC_MANUFACTURER_STRING "" #endif #ifndef CONFIG_USBDEV_MSC_PRODUCT_STRING #define CONFIG_USBDEV_MSC_PRODUCT_STRING "" #endif #ifndef CONFIG_USBDEV_MSC_VERSION_STRING #define CONFIG_USBDEV_MSC_VERSION_STRING "0.01" #endif /* move msc read & write from isr to while(1), you should call usbd_msc_polling in while(1) */ /* #define CONFIG_USBDEV_MSC_POLLING */ /* move msc read & write from isr to thread */ /* #define CONFIG_USBDEV_MSC_THREAD */ #ifndef CONFIG_USBDEV_MSC_PRIO #define CONFIG_USBDEV_MSC_PRIO 4 #endif #ifndef CONFIG_USBDEV_MSC_STACKSIZE #define CONFIG_USBDEV_MSC_STACKSIZE 2048 #endif #ifndef CONFIG_USBDEV_MTP_MAX_BUFSIZE #define CONFIG_USBDEV_MTP_MAX_BUFSIZE 2048 #endif #ifndef CONFIG_USBDEV_MTP_MAX_OBJECTS #define CONFIG_USBDEV_MTP_MAX_OBJECTS 256 #endif #ifndef CONFIG_USBDEV_MTP_MAX_PATHNAME #define CONFIG_USBDEV_MTP_MAX_PATHNAME 256 #endif #define CONFIG_USBDEV_MTP_THREAD #ifndef CONFIG_USBDEV_MTP_PRIO #define CONFIG_USBDEV_MTP_PRIO 4 #endif #ifndef CONFIG_USBDEV_MTP_STACKSIZE #define CONFIG_USBDEV_MTP_STACKSIZE 4096 #endif #ifndef CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE #define CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE 156 #endif /* rndis transfer buffer size, must be a multiple of (1536 + 44)*/ #ifndef CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE #define CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE 1580 #endif #ifndef CONFIG_USBDEV_RNDIS_VENDOR_ID #define CONFIG_USBDEV_RNDIS_VENDOR_ID 0x0000ffff #endif #ifndef CONFIG_USBDEV_RNDIS_VENDOR_DESC #define CONFIG_USBDEV_RNDIS_VENDOR_DESC "HPMicro" #endif #define CONFIG_USBDEV_RNDIS_USING_LWIP #define CONFIG_USBDEV_CDC_ECM_USING_LWIP /* ================ USB HOST Stack Configuration ================== */ #define CONFIG_USBHOST_MAX_RHPORTS 1 #define CONFIG_USBHOST_MAX_EXTHUBS 1 #define CONFIG_USBHOST_MAX_EHPORTS 4 #define CONFIG_USBHOST_MAX_INTERFACES 8 #define CONFIG_USBHOST_MAX_INTF_ALTSETTINGS 2 #define CONFIG_USBHOST_MAX_ENDPOINTS 4 #define CONFIG_USBHOST_MAX_SERIAL_CLASS 4 #define CONFIG_USBHOST_MAX_HID_CLASS 4 #define CONFIG_USBHOST_MAX_MSC_CLASS 2 #define CONFIG_USBHOST_MAX_AUDIO_CLASS 1 #define CONFIG_USBHOST_MAX_VIDEO_CLASS 1 #define CONFIG_USBHOST_DEV_NAMELEN 16 #ifndef CONFIG_USBHOST_PSC_PRIO #define CONFIG_USBHOST_PSC_PRIO 0 #endif #ifndef CONFIG_USBHOST_PSC_STACKSIZE #define CONFIG_USBHOST_PSC_STACKSIZE 2048 #endif /* #define CONFIG_USBHOST_GET_STRING_DESC */ /* #define CONFIG_USBHOST_MSOS_ENABLE */ #ifndef CONFIG_USBHOST_MSOS_VENDOR_CODE #define CONFIG_USBHOST_MSOS_VENDOR_CODE 0x00 #endif /* Ep0 max transfer buffer */ #ifndef CONFIG_USBHOST_REQUEST_BUFFER_LEN #define CONFIG_USBHOST_REQUEST_BUFFER_LEN 4096 #endif #ifndef CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT #define CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT 500 #endif #ifndef CONFIG_USBHOST_MSC_TIMEOUT #define CONFIG_USBHOST_MSC_TIMEOUT 5000 #endif #ifndef CONFIG_USBHOST_SERIAL_RX_SIZE #define CONFIG_USBHOST_SERIAL_RX_SIZE 2048 #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_RNDIS_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_RNDIS_ETH_MAX_RX_SIZE (16 * 1024) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_RNDIS_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_RNDIS_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_CDC_NCM_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_CDC_NCM_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_CDC_NCM_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_CDC_NCM_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_RTL8152_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_RTL8152_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_RTL8152_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_RTL8152_ETH_MAX_TX_SIZE (2048) #endif #define CONFIG_USBHOST_BLUETOOTH_HCI_H4 /* #define CONFIG_USBHOST_BLUETOOTH_HCI_LOG */ #ifndef CONFIG_USBHOST_BLUETOOTH_TX_SIZE #define CONFIG_USBHOST_BLUETOOTH_TX_SIZE 2048 #endif #ifndef CONFIG_USBHOST_BLUETOOTH_RX_SIZE #define CONFIG_USBHOST_BLUETOOTH_RX_SIZE 2048 #endif /* ================ USB Device Port Configuration ================*/ #define CONFIG_USBDEV_MAX_BUS USB_SOC_MAX_COUNT #ifndef CONFIG_HPM_USBD_BASE #define CONFIG_HPM_USBD_BASE HPM_USB0_BASE #endif #ifndef CONFIG_HPM_USBD_IRQn #define CONFIG_HPM_USBD_IRQn IRQn_USB0 #endif /* ================ USB Host Port Configuration ==================*/ #define CONFIG_USBHOST_MAX_BUS USB_SOC_MAX_COUNT #ifndef CONFIG_HPM_USBH_BASE #define CONFIG_HPM_USBH_BASE HPM_USB0_BASE #endif #ifndef CONFIG_HPM_USBH_IRQn #define CONFIG_HPM_USBH_IRQn IRQn_USB0 #endif /* ================ EHCI Configuration ================ */ #define CONFIG_USB_EHCI_HPMICRO (1) #define CONFIG_USB_EHCI_HCCR_OFFSET (0x100u) #define CONFIG_USB_EHCI_FRAME_LIST_SIZE 1024 #define CONFIG_USB_EHCI_QH_NUM 10 #define CONFIG_USB_EHCI_QTD_NUM 64 /* ================ Addr Convert Configuration ==================*/ #ifndef usb_phyaddr2ramaddr #define usb_phyaddr2ramaddr(addr) core_local_mem_to_sys_address(BOARD_RUNNING_CORE, addr) #endif #ifndef usb_ramaddr2phyaddr #define usb_ramaddr2phyaddr(addr) sys_address_to_core_local_mem(BOARD_RUNNING_CORE, addr) #endif #define ATTR_FAST_RAM_SECTION __attribute__((section(".fast"))) // #define CONFIG_USB_EHCI_ISO #endif