| Age | Commit message (Collapse) | Author |
|---|
|
This patch updates OpenSBI version to 0.4 as part of
release preparation.
Signed-off-by: Anup Patel <[email protected]>
|
|
The Linux kernel will maintain the device tree (DT) for HiFive Unleashed
from release v5.2-rc6. This DT is incompatible with previous DT
present for Microsemi expansion board in OpenSBI.
Since, OpenSBI will directly load the pre-built DTB from kernel now onwards,
no need to keep the out-of-date DT in openSBI. Remove this DT and
it's related documentation.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
When relocation is not required (i.e. _load_start == _link_start), we
can skip two stage wait for secondary HARTs. This means secondary HARTs
can skip the _wait_relocate_copy_done() loop and directly jump to the
_wait_for_boot_hart() loop when no relocation not required.
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch adds Ariane FPGA to RV64 platform list in the binary
archive script.
Signed-off-by: Anup Patel <[email protected]>
|
|
With 5.2-rc6 release, Linux kernel hosts the DT for Unleashed board
which is incompatible with the default DT from FSBL.
Update the document to use the DT from kernel.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Add firmware context field struct sbi_platform to carry firmware
specific information.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Panagiotis Peristerakis <[email protected]>
|
|
This patch adds support for Ariane platform.
We needed to enable PLIC interrupts early(like on BBL) due to some issue of the design.
Otherwise, Linux would not get any external interrupts.
Signed-off-by: Panagiotis Peristerakis <[email protected]>
|
|
Signed-off-by: Panagiotis Peristerakis <[email protected]>
|
|
The old code may corrupt the code of the waiting hart hence this patch
keeps waiting HART within relocation code range at time of relocation.
Signed-off-by: Xiang W <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
tinyfdt.c was originally added to provide a minimal implementation of
fdt parsing. However, we have already included libfdt in OpenSBI for
more complicated operations.
Remove tinfdt and replace its functiolity using libfdt.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
All string functions are part of libsbi. It makes more sense
to rename them to sbi_string.x as the libsbi can be linked
with external libraries that can have similar implementation.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
libsbi needs some of the custom libc functions. It should be directly
included in libsbi instead of platform specific libraries.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
This patch extends relocation to handle overlapping load and link
addresses.
The updated relocation will work fine in most cases except when the
relocate copy loop itself falls in overlapping load and link addresses.
Signed-off-by: Xiang W <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch extends fw_base to relocate to link address whenever
firmware load address is not equal to link address.
The relocation will not work when load start to load end overlap
link start to link end.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Lukas Auer <[email protected]>
|
|
The linker sections .sdata and .sbss are missing from the linker script
fw_base.ldS. Add them to the .data and .bss sections.
On current builds, most variables are in the .sbss section. They are not
correctly initialized to zero, because they are not within the
boundaries indicated by _bss_start and _bss_end. Currently, this does
not cause any issues, however with relocation support lock-ups may occur
due to incorrectly initialized lock variables.
Signed-off-by: Lukas Auer <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Add Andreas Schwab to the contributors list.
Signed-off-by: Karsten Merker <[email protected]>
Acked-by: Andreas Schwab <[email protected]>
|
|
- OpenSBI build target should be: qemu/sifive_u
- U-Boot config name should be: sifive_fu540_defconfig
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Since QEMU commit 8b1d0714bfdd
"riscv: sifive_u: Allow up to 4 CPUs to be created",
the maximum number of hart for sifive_u is 4.
Change our hart count to match that.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The unpriv load/store instruction from M-mode can cause page/access
fault to M-mode if S-mode page table did not have mappings OR it did
not have PMP access permission.
To tackle this, we redirect trap back to S-mode if unpriv load/store
instruction traps in M-mode.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch adds per-HART trap info pointer which can be used to
communicate trap information to sbi_trap_handler().
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, the unprivilege load/store functions are inline functions.
We will be extending these functions to track whether a page/access
fault occurs when we execute unprivilege load/store instruction.
To make things simpler and debugable, we reduce number of places which
can potentially generate a page/access fault by making all unprivilege
load/store functions as regular (non-inline) functions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch factor-out TLB management from IPI management to separate
sources sbi_tlb.c and sbi_tlb.h.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We have extra space above scratch space (sbi_scratch) which we are
currently using to manage per-HART IPI data and TLB request management.
In future, more parts of OpenSBI will use the extra scratch space so
it will become difficult to manage extra scratch space using just
defines and macros.
This patch adds a simple brain-dead allocator to manage extra scratch
space. This allocator never expects anything to be free-ed hence it
keeps incrementing to next allocation offset until it runs-out of space.
In future, we can have more sophisticated allocator which will allow
us to re-claim free-ed space and also allows us to track owner of
allocated space.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
On latest Linux kernel (i.e. 5.2-rc1), we get large TLB flush
request for user space addresses (typically, start=x and end=-1).
This is caused by Linux kernel commit a21344dfc6 ("riscv: fix
sbi_remote_sfence_vma{,_asid}").
It's not practical to execute large number of sfence instructions
for a large TLB flush range because it takes too much time and
eventually causes CPU stall in Linux kernel.
This patch addresses above issue by upgrading TLB flush range to
TLB flush all whenever TLB flush range is greater than 1GB.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch adds documenation about dynamic firmware.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch enables FW_DYNAMIC option (i.e. dynamic firmware) for
all appropriate/applicable platforms.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
This patch provides first-cut implementation of fw_dynamic firmware.
As compared to fw_jump and fw_payload, the fw_dynamic obtains next
address, next mode and OpenSBI options from struct fw_dynamic_info.
The previous booting stage can create struct fw_dynamic_info in memory
and pass address of struct fw_dynamic_info in 'a2' register. Also, the
struct fw_dynamic_info has versioning as well so changes to the struct
fw_dynamic_info can be done in a backward compatible manner.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch extends existing firmwares (i.e. fw_jump and fw_payload)
to explicitly provide next mode and options to fw_base.
We also introduce fw_save_info() which is called by fw_base very
early on boot HART. This function can be used by existing firmwares
(i.e. fw_jump and fw_payload) to save information passed by previous
booting stage.
Overall, this is a preparatory patch for implementing fw_dynamic.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
OpenSBI has recently gained a CONTRIBUTORS.md file as a way
to make contributions to OpenSBI more visible. Add previous
contributors from the git history who have acked their
inclusion in the list to the file.
Signed-off-by: Karsten Merker <[email protected]>
Acked-by: Alistair Francis <[email protected]>
Acked-by: Anup Patel <[email protected]>
Acked-by: Atish Patra <[email protected]>
Acked-by: Bin Meng <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Acked-by: Nick Kossifidis <[email protected]>
Acked-by: Shawn Chang <[email protected]>
Acked-by: Xiang Wang <[email protected]>
|
|
- fix some broken hyperlinks
- add additional hyperlinks to references to external documents
- reformat some paragraphs to keep lines under 80 characters
- unify the enumeration style between different parts of the
documentation
- fix spelling/grammar mistakes
- extend the copyright notice in README.md to be the same as the
one in COPYING.BSD
Signed-off-by: Karsten Merker <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Fix typo on parenthesis.
|
|
The various available RISC-V toolchains differ in their default
configuration regarding PIE, e.g. the buildroot RISC-V toolchain
has PIE disabled by default while the Debian toolchain has it
enabled by default.
OpenSBI currently doesn't support being built with PIE enabled,
therefore disable it explicitly by passing "-fno-pie -no-pie" in
CFLAGS.
Signed-off-by: Karsten Merker <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Xiang Wang <[email protected]>
|
|
Signed-off-by: Shawn Chang <[email protected]>
|
|
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <[email protected]>
|
|
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <[email protected]>
|
|
Add an empty clang-format to disable reformatting of imported code and
make it easier to merge in upstream changes of that project over time.
Signed-off-by: Olof Johansson <[email protected]>
|
|
Add a clang-format to automate consistent code formatting.
Automating coding style reformatting removes a lot of manual
checkpatch-type fixups, and can easily be implemented as a linter in
code review environments.
Signed-off-by: Olof Johansson <[email protected]>
|
|
In case we didn't handle a trap with one of the available
handlers, check if the trap comes from S or U mode and
redirect it to S mode's trap handler.
Signed-off-by: Nick Kossifidis <[email protected]>
|
|
All dependant patches are merged in U-Boot and Linux kernel now.
Update the unleashed guide to reflect that and fix the documentation
about tftp loading path as well.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
We add CONTRIBUTORS.md file to provide a list of individuals and
organizations actively contributing to the OpenSBI project.
Signed-off-by: Anup Patel <[email protected]>
|
|
- Correct the payload address in the RV64 examples that use
fw_jump.elf.
- Change the qemu console configuration in the examples from
"-display none -serial stdio" to "-nographic". This results in
qemu handing down a CTRL-C on the emulated console to the VM
instead of terminating the qemu process.
- Provide examples for RV32.
- Various text corrections.
Signed-off-by: Karsten Merker <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Simulatenous requests for tlbflush IPIs can have overlapping address
ranges.
Ignore if address range is same or within already existing fifo entries.
Update the tlb flush info in fifo directly if the one of the existing
entry lies within the new flush request.
Delete all entries if flush all request is recieved for the vma.
Signed-off-by: Atish Patra <[email protected]>
|
