| Age | Commit message (Collapse) | Author |
|---|
|
If the path where this repo is located contains the platform name on
it, the original Makefile replaced its occurrences from the path making
it an invalid path. This commit prevents this behavior replacing only
the last part of the path as intended.
Signed-off-by: Alejandro Cabrera Aldaya <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
I don't know why but `echo -n` didn't work for me. macOS supports
the `-n` option but it doesn't work in the makefile. What it does
instead is it literally writes `-n` to the file and then also
leaves a newline at the end.
I'm using GNU Make 4.4 (`gmake` from Homebrew).
Signed-off-by: KaDiWa <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add back the missing rules needed to build carray files in lib/sbi. This
allows future usage of carray in lib/sbi.
Fixes: de80e9337d81 ("Makefile: Compile lib/utils sources separately for each platform")
Signed-off-by: Vivian Wang <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add cscope support so that running `make cscope` will generate/update
cscope files used for source code browsing, while running `make
distclean` will remove the cscope files.
Also add entry in .gitignore to ignore generated cscope files.
Signed-off-by: Tan En De <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
The "object.mk" name referred in top-level makefile should be
"objects.mk".
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
The options defined in config.mk can be specified in objects.mk of each
platform so let us remove config.mk from all platforms.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
Currently, if same build directory is used to compile two different
platforms then lib/utils objects are shared for these platforms.
We will be having platform specific configs to enable/disable drivers
in lib/utils and select compile time options for lib/utils sources.
This means lib/utils sources will now be compiled in a platform
specific way.
To tackle above, we update top-level Makefile as follows:
1) Don't create libsbiutils.a anymore because this can't be shared
between platforms.
2) Compile lib/utils sources separately for each platform.
3) Add comments showing which make rules are for lib/sbi, lib/utils,
firmware, and platform sources.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We extend the top-level makefile to allow kconfig based configuration
for each platform where each platform has it's own set of configs with
"defconfig" being the default config.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
Generating C array at compile time based on details provided by
objects.mk is a very useful feature which will help us compile
only a subset of drivers or modules.
We add a bash script (carray.sh) which takes array details and
object/variable list from command-line to generate a C source
containing array of object/variable pointers. We also extend
top-level makefile to use carray.sh whenever specified through
objects.mk.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The generated C source could be anywhere within build directory so
let us update the make rule to comple generated C source accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC lib/sbi/sbi_tlb.o
<<BUILDDIR>>/lib/sbi/sbi_tlb.c: Assembler messages:
<<BUILDDIR>>/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i'
make: *** [Makefile:431: <<BUILDDIR>>/build/lib/sbi/sbi_tlb.o] Error 1
The fix is to specify those extensions explicitly in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The commit 69d7e53 disables the -m(no-)save-restore option for
clang, but clang11 supports this option. This patch uses the
output information of the compiler to check whether the compiler
supports this option.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The riscv target of CLANG-10 (or lower) does not support the
-m(no-)save-restore option so we get compile warnings. This patch
fixes compile warning by using -m(no-)save-restore option only
for GCC.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Dong Du <[email protected]>
|
|
When we are doing opensbi development, we want to know the build time
and compiler info for debug purpose.
To enable this message, please add "BUILD_INFO=y", like:
```
make BUILD_INFO=y
```
NOTE: Using `BUILD_INFO=y` without specifying SOURCE_DATE_EPOCH will
violate "reproducible builds". So it's ONLY for development and debug
purpose, and should NOT be used in a product which follows "reproducible
builds".
Signed-off-by: Wei Fu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
When generating code with -mno-relax, GCC puts .option norelax in
the generated assembly, and so doesn’t bother passing on -mno-relax
to the assembler. This has the unfortunate effect that, when using
GCC to assemble hand-written assembly, -mno-relax does nothing,
and we have to pass -Wa,-mno-relax to manually forward it to the
assembler.
This is an old GCC bug that was fixed [1] recently. For the time
being, let's pass "-Wa,-mno-relax" to ASFLAGS for the GCC + LLD
combination to work, e.g.:
$ make CC=riscv64-unknown-elf-gcc LLVM=1 PLATFORM=generic
[1] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We only need libgcc for 64-bit division on RV32. Whilst GCC toolchains
bundle libgcc, Clang toolchains tend not to ship libclang_rt.builtins
given every compiler is a cross-compiler for every target and so you
would need a silly number of builds of it, with only the native library
available; only vendor-provided Clang toolchains specifically for bare
metal cross-compiling are likely to provide it.
Thus, import part of FreeBSD's implementation of the division support
functions needed and stop linking against libgcc.
Signed-off-by: Jessica Clarke <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
|
|
This is intended to mirror the Linux kernel. Building with CC=clang will
use Clang as the compiler but default to using the existing binutils.
Building with LLVM=1 will default to using Clang and LLVM binutils.
Whilst GCC will accept the -N linker option and forward it on to the
linker, Clang will not, and so in order to support both compilers we
must use -Wl, to forward it to the linker as is required for most other
linker options.
Note that there is currently a bug when using Clang as the compiler and
riscv64-linux-gnu-ld as the linker for FW_PIC=y. At first glance this
appears to be a bug in GNU binutils, but this could also be Clang or
OpenSBI at fault in some subtle way. Thus, for now, advise that this
combination be avoided.
Signed-off-by: Jessica Clarke <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
|
|
Bare-metal GNU ld does not support PIE, so if using it this will result
in a failure to build. Instead, default to FW_PIC=n if not supported.
Note that an explicit FW_PIC=y is not overridden, to ensure the build
fails rather than silently producing a position-dependent binary.
Signed-off-by: Jessica Clarke <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Though -nostdlib is passed in CFLAGS, -fno-stack-protector must also be
passed to avoid linking errors related to undefined references to
'__stack_chk_guard' and '__stack_chk_fail' if toolchain enforces
-fstack-protector.
Fixes:
- https://gitlab.com/kubu93/buildroot/-/jobs/1247043359
Signed-off-by: Fabrice Fontaine <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
GCC has already a predefined macro __ASSEMBLER__ therefore, it can be
used without the need to define a new flag with -D__ASSEMBLY__.
This is useful when adding the library to projects having a build
system such one can build without the need to make changes.
THe build system does not use the Makefile in the sources tree.
Signed-off-by: Marouene Boubakri <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Enable OpenSBI to support position independent execution. Because the
position independent code will cause an additional GOT reference when
accessing the global variables, it will reduce performance a bit. Therefore,
the position independent execution is disabled by default. Users can
through specifying "FW_PIC=y" on the make command to enable this feature.
In theory, after enabling position-independent execution, the OpenSBI
can run at arbitrary address with appropriate alignment. Therefore, the
original relocation mechanism will be skipped. In other words, OpenSBI will
directly run at the load address without any code movement.
Signed-off-by: Vincent Chen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When PLATFORM_RISCV_ABI and PLATFORM_RISCV_ISA are not specified,
we force "-mabi=lp64 -march=rv64gc" for RV64 and force "-mabi=ilp32
-march=rv32gc" for RV32. This can prevent users from using the
toolchain default "-mabi" and "-march" options.
To allow using toolchain defaults, we add compile-time option
PLATFORM_RISCV_TOOLCHAIN_DEFAULT which when enabled forces the
top-level makefile to use toolchain default ABI and ISA string.
To enable the option, pass "PLATFORM_RISCV_TOOLCHAIN_DEFAULT=1"
to top-level make.
Reported-by: Alistair Francis <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
We extend d2c.sh to allow padding zeros in output C source when
converting DTB to C source. Using this feature, platforms can
create extra room for in-place FDT fixups on built-in DTBs.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, the make rules for ELF, BIN and LD script are little
generic to allowing ELF, BIN and LD script to be anywhere in the
build directory. For OpenSBI firmwares, the ELF, BIN, and LD script
are always platform specific so we update make rules accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Add cleaning of compiled device tree files (.dtb files).
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, we can only include one DTB as builtin for a platform
using FDT_PAYLOAD_DTB make variable in platform config.mk.
This patch adds new mechanism using which we can convert any DTS
file to C source and futher compile-n-link it with libplatsbi.a.
The generated C source will have the DTB contents as an array
"const char <varprefix>_start[]" where <varprefix> is specified
in platform objects.mk makefile.
Example1
--------
If we have built-in k210.dts and desired <varprefix> is
"dt_k210" then specify following in platform objects.mk:
platform-objs-y += k210.o
platform-varprefix-k210.o = dt_k210
Example2
--------
If we have built-in abc/k210.dts and desired <varprefix> is
"dt_abc_k210" then specify following in platform objects.mk:
platform-objs-y += abc/k210.o
platform-varprefix-abc-k210.o = dt_abc_k210
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
In order to use GCC style defines and macros in DTS, we should
preporcess builtin DTS before converting it to DTB.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The make rule for builtin DTB compilation does not consider
out-of-tree platforms so this patch fixes it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The default install directory is not being removed correctly by
distclean make target due to recent changes. This patch fixes
distclean make target to fix default install directory removal.
Fixes: 82ae8e8fe2a3 ("makefile: Do setup of the install target
more flexible")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
- Add possibility to setup include, libs, firmware and docs paths.
- Change the default installation paths for include, libs, firmware
and docs to meet FHS [1].
[1] https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
Signed-off-by: Nikita Ermakov <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
On macOS the readlink command does not include a -f flag. Instead default
to using GNU readlink (which is often installed as greadlink).
Signed-off-by: Alex Richardson <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
this is a stand-alone/baremetal application, therefore demanding
-ffreestanding would help it compile with hosted toolchains e.g. ( linux
toolchains ), it also ensures that it won't be using platform
optimizations like inlining mem* str* functions which gcc might decide
especially with wrapper string functions in opensbi code
Signed-off-by: Khem Raj <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, if someone has forked OpenSBI repo quite sometime back
and this fork is not having updated tags from upstream riscv/opensbi
repo then "git describe" command can fail. To tackle this, we redirect
error output of "git describe" to /dev/null.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
OpenSBI includes a version, but that is only updated when tagged. For
users that are using the git releases we instead end up with an
ambiguous version number, which makes it hard to figure out what
everyone is using. This patch checks for a git directory and prints out
the result of `git describe`, which is a mix of pretty and unambiguous.
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Tested-by: Bin Meng <[email protected]>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
The various available RISC-V toolchains differ in their default
configuration regarding PIE, e.g. the buildroot RISC-V toolchain
has PIE disabled by default while the Debian toolchain has it
enabled by default.
OpenSBI currently doesn't support being built with PIE enabled,
therefore disable it explicitly by passing "-fno-pie -no-pie" in
CFLAGS.
Signed-off-by: Karsten Merker <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
This patch extends our current build-system for building platform
sources which are not part of OpenSBI sources.
For example:
Let's say we have out-of-tree ABC platform sources. We place these
sources under <XYZ>/ABC directory along with its config.mk and
objects.mk.
To build out-of-tree ABC platform from OpenSBI directory:
$ make PLATFORM_DIR=<XYZ>/ABC
OR
$ make PLATFORM_DIR=<XYZ> PLATFORM=ABC
To build out-of-tree ABC platform from <XYZ>/ABC directory:
$ make PLATFORM_DIR=<XYZ>/ABC -C <path_to_opensbi>
OR
$ make PLATFORM_DIR=<XYZ> PLATFORM=ABC -C <path_to_opensbi>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
|
|
|
|
Ensure the platform variable PLATFORM_RISCV_XLEN is set before we parse
the platform files.
This fixes the 32-bit openSBI FW_JUMP_ADDR.
Signed-off-by: Alistair Francis <[email protected]>
|
|
The compile_ld() is actually used to create ELF files so
the name is misleading hence this patch renames it to
compile_elf(). We also rename LDFLAGS to ELFFLAGS because
these will be used for ELF creation only.
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch replaces use of awk with sed in top-level makefile
to parse OpenSBI version from include/sbi/sbi_version.h.
Signed-off-by: Anup Patel <[email protected]>
|
|
We get following error evaluating OPENSBI_CC_XLEN on
Ubuntu-18.04:
/bin/sh: 1: Bad substitution
This patch fixes above error by using "awk" in string
assigned to OPENSBI_CC_XLEN and it also moves "Setup
compilation commands" before OPENSBI_CC_XLEN.
Signed-off-by: Anup Patel <[email protected]>
|
|
Previously OPENSBI_CC_XLEN was not being correctly assigned either 32 or
64. It also was not assigned before config.mk was parsed. Ensure that it
will always be assigned.
Signed-off-by: Alistair Francis <[email protected]>
|
|
Makes for easy and quick build-run one-stop command.
For now only added for qemu targets. It can be added for
any platform having simulator/emulator (such as QEMU).
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
On Makefile merge_objs calls ld without providing any hints
on the target so on a multilib toolchain for example it will
always pick the default one (elf64-littleriscv) which will
then result a failure when compiling on RV32 since the objects
will be 32bits and the target will be 64bits. The same happens
on compile_ld that calls gcc without CFLAGS so it doesn't
get mabi/march.
With this patch OpenSBI compiles on RV32 (PLATFORM_RISCV_XLEN=32),
I tested fw_jump.elf on qemu (but it doesn't boot the kernel yet
-bbl also doesn't boot the kernel so it may be something else).
Signed-off-by: Nick Kossifidis <[email protected]>
|
|
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <[email protected]>
|
