| Age | Commit message (Collapse) | Author |
|---|
|
This patch extends our low-level trap handler in fw_base.S for
handling M-mode to M-mode traps without overwritting stack.
Signed-off-by: Anup Patel <[email protected]>
|
|
We expect the payloads to be 4 bit alligned as we later AND them
with ~0xf. As most of the addresses are manually specified we don't
really need this, but better to be over cautious.
Signed-off-by: Alistair Francis <[email protected]>
|
|
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Signed-off-by: Atish Patra <[email protected]>
|
|
Signed-off-by: Alistair Francis <[email protected]>
|
|
Signed-off-by: Andreas Schwab <[email protected]>
|
|
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <[email protected]>
|
|
The secondary hart waits for an IPI signal from the boot hart to
executing boot code (hot boot). As a result, software generated
interrupts have to be enabled for secondary harts before waiting for
the boot hart boot completion IPI signal.
Enabling software generated interrupts (IPI) can be done independently
of the firmware code and moved to libsbi code so that the different
firmware do not have to implement this.
Signed-off-by: Atish Patra <[email protected]>
|
|
Define sbi_ecall_console_puts() using sbi_ecall_console_putchar()
renamed as sbi_ecall_console_putc() and remove the hardcoded version
of the same funtion in the test payload code.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Use a more neutral term more representative of this payload intent.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Add rules to compile dts files into dtb files using the device tree
compiler (dtc). A platform can specify the DTS file to compile using
the platform-dtb-y variable. The flattened device tree binary file to be
used for building the final polatform firmware can be specified using
the new FW_PAYLOAD_FDT firmware configuration option to point to the
automatically compiled FDT file. Using the existing FW_PAYLOAD_FDT_PATH
configuration option is still possible and will take precedence over
the FW_PAYLOAD_FDT definition.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Signed-off-by: Alistair Francis <[email protected]>
|
|
The tmp0 member was added in struct sbi_scratch to assist
register save/restore at time of trap handling. This tmp0
is not unsed any more hence removing it.
Signed-off-by: Anup Patel <[email protected]>
|
|
The struct sbi_trap_regs related defines RISCV_TRAP_REGS_xyz should
be in sbi_trap.h so that we can keep these defines in-sync with changes
in struct sbi_trap_regs.
Signed-off-by: Anup Patel <[email protected]>
|
|
The struct sbi_platform related defines RISCV_PLATFORM_xyz should
be in sbi_platform.h so that we can keep these defines in-sync
with changes in struct sbi_platform.
Signed-off-by: Anup Patel <[email protected]>
|
|
The struct sbi_scratch related defines RISCV_SCRATCH_xyz should
be in sbi_scratch.h so that we can keep these defines in-sync
with changes in struct sbi_scratch.
Signed-off-by: Anup Patel <[email protected]>
|
|
The fw_common.S is the base firmware extendend by fw_jump and
fw_payload. This patch renames fw_common.S to fw_base.S to
have more clear/intutive name for base firmware.
Signed-off-by: Anup Patel <[email protected]>
|
|
We use recently added separate dummy payload for FW_PAYLOAD
when FW_PAYLOAD_PATH is not specified.
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, the default payload for FW_PAYLOAD is embedded
fw_payload.S itself. This means people have to hack fw_payload.S
if they want to have some temporary S-mode test code.
This patch adds a separate dummy payload for FW_PAYLOAD which
can be easily hacked for some S-mode testing.
Signed-off-by: Anup Patel <[email protected]>
|
|
The hart_count and hart_stack_size information is already available
in "struct sbi_platform" so we use that instead of depending on
PLAT_HART_COUNT and PLAT_HART_STACK_SIZE.
Signed-off-by: Anup Patel <[email protected]>
|
|
We don't need a separate stack section for per-HART stack
instead we create per-HART stack at the end of firmware
(i.e. after _fw_end symbol).
Signed-off-by: Anup Patel <[email protected]>
|
|
The mideleg and medeleg are already programmed in delegate_traps()
so no need to set it here.
Any CSR setup in our reference firmware becomes a requirement
for bootloader linking to libsbi.a so we should have minimum
possible CSR setup in our reference firmware.
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch reverts "Fix FDT relocation" because it breaks
fw_jump firmware.
Signed-off-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Also disable interrupts and exceptions delegation when clearing mie and
mip.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Or rather, disable it if FW_PAYLOAD_FDT_ADDR is not defined. This
correspond to cases where the underlying FW that loaded and started
opensbi did not provide any FDT. In such case, the platform code will
need to prepare one.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
This patch renames "blob" to "firmware" everywhere for better
and intutive naming.
Signed-off-by: Anup Patel <[email protected]>
|
