| Age | Commit message (Collapse) | Author |
|---|
|
Now that the generic platform only sets .vendor_ext_provider if the
function is really implemented, there is no need for a separate hook to
check if a vendor extension is implemented.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a macro assert_member_offset() to perform structure member offset
checking.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Provide a function to count the number of set bits in a hartmask,
which builds on a new function for the same that operates on a
bitmask. While at it, improve the performance of sbi_popcount()
which is used in the implementation.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The Control Transfer Records (CTR) extension provides a method to
record a limited branch history in register-accessible internal chip
storage.
This extension is similar to Arch LBR in x86 and BRBE in ARM.
The Extension has been stable and the latest release can be found here
https://github.com/riscv/riscv-control-transfer-records/release
Signed-off-by: Rajnesh Kanwal <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
When redirecting an exception to S-mode, transform the (v)stvec CSR
value as described in the privileged spec to derive the S-mode PC.
Since OpenSBI never redirects interrupts, only synchronous exceptions,
the only action needed is to mask out the (v)stvec.MODE field.
Reported-by: Jan Reinhard <[email protected]>
Closes: https://github.com/riscv-software-src/opensbi/issues/391
Signed-off-by: Samuel Holland <[email protected]>
Reviwed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Similarly to what is done for SPELP, handle SSTATUS.SDT upon event
injection. In order to mimick an interrupt, set SDT to 1 for injection and
save its previous value in interrupted_flags[5:5]. Restore it upon
completion.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
As raised during the ARC review, SPELP was not handled during the event
injection process. Save it as part of the interrupted flags, clear it
before injecting the event and restore it after completion.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
As raised by Andrew on the kvm-unit-test review, this flags are meant to
hold SSTATUS bits in the specification. Rename them to match that.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
The latest specification added new high priority RAS events and renamed
the PMU to PMU_OVERFLOW.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
There is currently no helper for iterating through the harts in a
system, and code must choose between sbi_scratch_last_hartindex() and
sbi_platform_hart_count() for the loop condition.
sbi_scratch_last_hartindex() has unusual semantics, leading to the
likelihood of off-by-one errors, and sbi_platform_hart_count() is
provided by the platform and so may not be properly bounded.
Add a new helper which definitively reports the number of harts managed
by this OpenSBI instance, i.e. the number of valid hart indexes, and a
convenient iterator macro.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The compiler generates much better code for sbi_hartindex_to_hartid()
and sbi_hartindex_to_scratch() when using a constant for the bounds
check. This works out nicely because the underlying arrays are already
a constant size, so the only change needed is to fill the remainder of
each array with the appropriate default/out-of-bounds value. The
ellipsis in the designated initializer is a GCC extension (also
supported by Clang), but avoids runtime initialization of the array.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The internal limit on the number of harts is SBI_HARTMASK_MAX_BITS, as
this value determines the size of various bitmaps and arrays (including
hartindex_to_hartid_table and hartindex_to_scratch_table). Clamp the
value provided by the platform, and drop the extra array element.
Update the documentation to indicate that hart_index2id must be sized
based on hart_count, and that hart indexes must be contiguous. As of
commit 5e90e54a1a53 ("lib: utils:Check that hartid is valid"), there is
no restriction on the valid hart ID values.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
OpenSBI is compiled with -fPIE, which generally implies dynamic linking.
This causes the compiler to generate GOT references for global symbols
in order to support runtime symbol interposition. However, OpenSBI does
not actually perform dynamic linking, so the GOT indirection just adds
unnecessary overhead.
The GOT references can be avoided by declaring global symbols with
hidden visibility, thus making them local to this dynamic object and
non-interposable. GCC/Clang's -fvisibility parameter is insufficient for
this purpose when referencing objects from other translation units;
either __attribute__((visibility(...)) or the pragma is required. Use
the pragma since it is easier to apply to every symbol. Additionally
clean up the one GOT reference from inline assembly.
With this change, a firmware linked with LLD does not contain either a
GOT or a PLT, and a firmware linked with BFD ld contains only a GOT with
a single (unreferenced, legacy) _GLOBAL_OFFSET_TABLE_ entry.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch adds unit tests for verifying the sbi_ecall version,
impid handling, and extension registration functions. The tests
ensure that the extension registration and unregistration work
as expected.
Signed-off-by: Akshay Behl <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add SBI_ERR_DENIED_LOCKED and set it as the SBI_LAST_ERR which was
wrongly set to SBI_ERR_BAD_RANGE.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the sbi_sse_init() in cold boot path is called after
sbi_domain_finalize() so boot HART of non-root domains will start
before SSE cold boot init which can cause warm boot of such HARTs
to crash in sbi_sse_init().
To address the above issue, factor-out the non-root domain startup
from sbi_domain_finalize() function as a separate sbi_domain_startup()
function which can be called after sbi_sse_init() in cold boot path.
Fixes: 93f7d819fdeb ("lib: sbi: sse: allow adding new events")
Signed-off-by: Anup Patel <[email protected]>
|
|
The latest SBI 3.0 spec defines a new sbi_mpxy_get_shmem_size()
function and simplifies sbi_mpxy_set_shmem() function so update
the MPXY framework and SBI extension accordingly.
Signed-off-by: Anup Patel <[email protected]>
|
|
Align SBI_TRAP_CONTEXT_SIZE to a multiple of 16 bytes. If it is not
aligned to 16 bytes for RV64, it can create performance problems.
Aligning it correctly can fix the performance issues.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In order to allow events to be dynamically added, remove the existing
static array of events and use a simply linked list of supported events.
This allows us to move the cb_ops into this list and associated it with
an event_id. Drivers can now register cb_ops before bringing up the sse
core to handle additional events (platform ones for instance).
sbi_sse_init() now allocates as many events as present in the linked
list. Events can now be added with sbi_sse_add_event() which allows to
add new supported events with some callback operations if any. If an
event is not to be supported, then sbi_sse_add_event() should not be
called. This approach currently consider that local events are to be
supported on all harts (ie, they all support the same ISA or
dependencies). If per-hart event availability needs to be supported,
then, an is_supported() callback could be added later and called for
each hart.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Add a simple singly linked list implementation when double linked list
are not needed. This allows to easily have statically defined linked
list that can be extended at runtime.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Update the OpenSBI version to 1.6 as part of release preparation.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Add boot-time prints for list of available standard and experimental
SBI extensions.
Signed-off-by: Anup Patel <[email protected]>
|
|
C23 pre-defines bool so we need to gate our defines.
Signed-off-by: Michael Neuling <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.
Reported-by: Andrew Jones <[email protected]>
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.
This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.
Co-developed-by: Zong Li <[email protected]>
Signed-off-by: Zong Li <[email protected]>
Signed-off-by: Nylon Chen <[email protected]>
Reviewed-by: Andy Chiu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce SBI Message Proxy (MPXY) framework which allows platform specific
code or drivers to register message protocol specific channels.
This framework enables the supervisor software to send messages belonging
to different message protocols via OpenSBI firmware.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Himanshu Chauhan <[email protected]>
Signed-off-by: Himanshu Chauhan <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Add an optional resume address to the platform specific hart suspend call.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Allow the supervisor software to query about the event using the
new function. This supports both firmware and hardware events.
The hardware event presence is verified hw_event_map which is populated
via PMU device tree node. The firmware event presence is checked through
event validation function which should take care of both standard and
platform firmware events.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The SBI v3.0 introduced a new function to query about the events
without invoking CFG_MATCH. This allows supervisor software to
identify which events are supported on the platform with single
SBI call instead of a CFG_MATCH for each event.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
As per the updated ISA specification and SBI PMU v3.0, lower 56
bits are available for the platform to implement mhpmeventX
encoding. Implement the PMU raw event V2 support defined in SBI
v3.0 which allows more bits for platforms to encode the raw events.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In addition to saving some code size, this moves the decision about
setting the top-level external interrupt handler to the irqchip core,
not the specific driver, which would be needed to support chained
interrupt handlers.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI irqchip core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, each platform keeps track of which irqchip driver is in use
and calls its warm init function. Since the generic platform may use
multiple irqchip drivers, it has logic to track an array of drivers.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Have the SBI irqchip core keep track of registered irqchip devices. This
is useful for any callbacks the irqchip driver may have, such as for
warm initialization, the external interrupt handler function, and any
future support for handling external interrupts (beyond IPIs) in M-mode.
This improves on the tracking done in fdt_irqchip.c, as it tracks device
instances, not just drivers, so callbacks can target a specific device.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that the SBI IPI core clears IPIs at warm boot in a generic way,
none of the drivers or platforms use these hooks, and we can remove
them. Platforms need only to initialize the driver once during cold
init. If other hooks are needed in the future, they can be added to
struct sbi_ipi_device.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
All existing users of this operation target the current hart, and it
seems unlikely that a future user will need to clear the pending IPI
status of a remote hart. Simplify the logic by changing .ipi_clear (and
its wrapper sbi_ipi_raw_clear()) to always operate on the current hart.
This incidentally fixes a bug introduced in commit 78c667b6fc07 ("lib:
sbi: Prefer hartindex over hartid in IPI framework"), which changed the
.ipi_clear parameter from a hartid to a hart index, but failed to update
the warm_init functions to match.
Fixes: 78c667b6fc07 ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix typo in comments describing SBI_SCRATCH_FW_HEAP_SIZE_OFFSET.
Signed-off-by: Zhang RunMin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
DBTR introduce a big heap allocation to store hart state, this is
allocated percpu and needs big space when CPU number is high.
Increase the percpu part to fix this problem, and decrease the
fixed part to avoid too big heap size.
Fixes: 97f234f (lib: sbi: Introduce the SBI debug triggers extension support)
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
csr_read() is marked as volatile and clobbering memory, which is
generally the safe thing to do. However, these two CSRs do not have any
side effects, and the values returned do not change between calls. The
compiler can generate better code if we allow it to reorder calls to
these functions and cache the return value. Introduce csr_read_relaxed()
for this use case.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add support for the Smdbltrp[1] ISA extension. First thing to do is
clearing MDT on entry after setting the first MTVEC (since MDT is
reset to 1). Additionally, during trap handling, clear MDT once all
critical CSRs have been saved and in return path, restore MSTATUS/H
before restoring MEPC to avoid taking another trap which would clobber
it.
Link: https://github.com/riscv/riscv-double-trap/releases/download/v0.56/riscv-double-trap.pdf [1]
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Add support for double trap firmware feature.
Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
MENVCFG access will be used as well for double trap, landing pad and
shadow stack fwft support. Factorize that in a common function.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
In case the double trap handler is called and the double trap happened
in supervisor mode, send a double trap SSE event.
NOTE: this commit depends on the ratification of the new SSE event
id for double trap [1].
Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Add Ssdbltrp trap handler support for S-mode double trap handling. If
the trap is received while in VS-mode, then the trap is redirected to
S-mode. If caught while in HS-mode, then an error is returned to the top
trap handler which will panic.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
