| Age | Commit message (Collapse) | Author |
|---|
|
save/restore helpers
Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
save/restore helpers
Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add FDT driver for Renesas SCIF.
dts example:
soc: soc {
....
scif0: serial@1004b800 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004b800 0 0x400>;
interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
<414 IRQ_TYPE_LEVEL_HIGH>,
<415 IRQ_TYPE_LEVEL_HIGH>,
<413 IRQ_TYPE_LEVEL_HIGH>,
<416 IRQ_TYPE_LEVEL_HIGH>,
<416 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
clock-names = "fck";
power-domains = <&cpg>;
resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
status = "disabled";
};
....
};
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add Renesas SCIF driver.
Based on a patch in the BSP by Takeki Hamada
<[email protected]>
Link: https://github.com/renesas-rz/rz_opensbi/commits/work/OpenSBI-PMA
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since we can get the PLMT base address and timer frequency from
device tree, move plmt timer device to fdt timer framework.
dts example (Quad-core AX45MP):
cpus {
...
timebase-frequency = <0x3938700>;
...
}
soc {
...
plmt0@e6000000 {
compatible = "andestech,plmt0";
reg = <0x00 0xe6000000 0x00 0x100000>;
interrupts-extended = <&cpu0_intc 0x07
&cpu1_intc 0x07
&cpu2_intc 0x07
&cpu3_intc 0x07>;
};
...
}
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add RISC-V semihosting based serial console for JTAG based early
debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Kautuk Consul <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add Cadence UART driver
Signed-off-by: Jun Liang Tan <[email protected]>
Signed-off-by: Wei Liang Lim <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We update FDT support makefile to use kconfig for enabling/disabling.
To avoid compilation errors, we also enable FDT for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update irqchip drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate irqchip
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update ipi drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate ipi
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update timer drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate timer
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update reset drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate reset
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update serial drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate serial
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
The delegation bit is lost along with the rest of the PLIC state when
the CPU power domain in the Allwinner D1 is powered down, so the PLIC
needs to be re-delegated to S-mode during the hart resume path.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
These functions save/restore the state of the PLIC associated with the
current hart. The context save/restore functions only manipulate a
single context, since most likely the M-mode context is unused and does
not need to be saved.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
These can be used by platform code to save the PLIC priority state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
As a space optimization, store the saved priority values as 8-bit
integers, since that is large enough to hold any priority value on the
relevant platforms.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
These can be used by platform code to save the PLIC context state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
This simplifies both the callers and the callees by removing duplicated
code and consolidating the error handling. It also fixes two bugs in the
process:
1) ie_words was one too large when plic->num_src was a multiple of 32.
2) plic_set_ie takes a 32-bit mask, not a Boolean value, so the FPGA
platforms previously only enabled one out of every 32 interrupts.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
None of the functions modify the passed-in plic_data, so mark it const.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
Match data stores hardware attributes which do not change at runtime, so
it does not need to be mutable. Make it const.
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Instead of having FDT gpio driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
reg-offset property is used for offset to apply to the mapbase
from the start of the registers in 8250 UART. In Linux kernel,
it has been handled in 8250 UART driver.
dt-bindings:
<linux>/Documentation/devicetree/bindings/serial/8250.yaml
Signed-off-by: Zong Li <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Initial commit of the xlnx-uartlite device and FDT support. This was
tested by running OpenSBI on a modified QEMU virt machine using the
xlnx-uartlite for serial.
Signed-off-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We should disable APLIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple FDT irqchip driver for APLIC so that generic platform (and
other FDT based platforms) can utilize common APLIC initialization library.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We should disable IMSIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple IMSIC library which is independent of hardware description
format (FDT or ACPI). This IMSIC library can be used by custom OpenSBI
platform support to setup IMSIC for external interrupts.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Some of RISC-V emulators provide HTIF at fixed base address so for
such emulators users have to hard-code HTIF base address in the
linker script.
To address this problem, we let users optionally provide fixed HTIF
base address via platform support (or device tree).
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Dong Du <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Add support for the UART provided by the LiteX SoC
framework (https://github.com/enjoy-digital/litex),
based on its FDT info (described in the Linux tree at
Documentation/devicetree/bindings/serial/litex,liteuart.yaml).
Signed-off-by: Gabriel Somlo <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
FDT based I2C framework on the top of I2C library.
The drivers are probed on demand by fdt_i2c_adapter_get
function.
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
Helper library to keep track of registered I2C adapters,
identified by dts offset, basic send/read functions and
adapter configuration (enable, set dividers, etc...).
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
Move driver init code to separate function, so it can be reused
elsewhere.
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
The initialization of a reset driver may fail for various reasons, like
a PMIC based reset driver not finding the required I2C driver. The return
code of the init routine may take other error values than -ENODEV.
If the initialization of a reset driver fails, this should not lead to the
board hanging. It is enough that the reset driver does not call
sbi_system_reset_add_device() to avoid invoking the driver for a device
that could not be initialized.
Change the return type of fdt_reset_init() to void.
Print a message if an error occurs.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Dong Du <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Convert static array to sbi_list.
This removes size limitation, makes add/remove more efficient and
saves space.
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We simplify MTIMER synchronization as follows:
1) Detect MTIMER devices with unique (or non-shared) MTIME
register at boot-time
2) Select first MTIMER device with no associated HART as our
reference MTIMER device
3) Only synchronize MTIMER devices with unique (or non-shared)
MTIME register using reference MTIMER device
4) Directly update the MTIME register at time of synchronization
because MTIME is a read/write register.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add a simple FDT based GPIO framework which is built on top
of generic GPIO library. The phandle of FDT GPIO chip DT node
is treated as unique GPIO chip ID required by the generic GPIO
library. The FDT based GPIO chip drivers will be probed on-demand
from fdt_gpio_pin_get() called by the GPIO client drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add generic GPIO configuration library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or GPIO drivers can register GPIO chip instances which
can be discovered and used by different GPIO clients. Each GPIO
chip instance has a unique ID which can be used by GPIO clients
to lookup GPIO chip instance.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
