| Age | Commit message (Collapse) | Author |
|---|
|
The latest frozen RPMI spec has added Implementation ID
and Implementation Version as message protocol specific
mpxy attributes. Add support for these.
Signed-off-by: Rahul Pathak <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
It seems that current implementation doesn't fail on fdt_mpxy_init(),
because platforms might not have any MPXY devices. In fact, if there are
no MPXY devices, fdt_driver_init_all() will return SBI_OK.
More importantly, if there is any MPXY device which fails the
initialization, OpenSBI must check the error code and stop the booting.
Thus, this commit adds the return value for fdt_mpxy_init().
Signed-off-by: Alvin Chang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The discovery of P2A doorbell system MSI index is now through RPMI
shared memory DT node so remove p2a_db_index from RPMI system MSI
attributes and access it as a mailbox channel attribute.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The P2A doorbell system MSI index is expected to be discovered from
device tree instead of RPMI system MSI service group attribute. This
is based on ARC feedback before RPMI spec was frozen.
Let's parse P2A doorbell system MSI index from device tree and also
expose it as rpmi channel attribute to RPMI client drivers.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Set the scratch allocation alignment to cacheline size specified by
riscv,cbom-block-size in the DTS file to avoid two atomic variables
from the same cache line causing livelock on some platforms. If the
cacheline is not specified, we set it a default value.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This function has been obsoleted by the fdt_driver library and is no
longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The PXA variant of the uart8250 adds the UART Unit Enable bit (UUE) that
needs to be set to enable the XScale PXA UART. And it is required for
some RISC-V SoCs like the Spacemit K1 that implement the PXA UART.
This introduces the "intel,xscale-uart" compatible to handle setting the
UUE bit.
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <[email protected]>
|
|
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <[email protected]>
|
|
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <[email protected]>
|
|
The rpmi_mailbox.h uses structures defined in mailbox.h so let's
include mailbox.h in rpmi_mailbox.h header.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <[email protected]>
|
|
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
s/hard_id/hartid/
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf68055 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Himanshu Chauhan <[email protected]>
|
|
This is needed for a future patches to enable the new C23 language dialect.
Signed-off-by: Michael Neuling <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI based driver for CPPC register read, write and probe.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Co-developed-by: Rahul Pathak <[email protected]>
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Sunil V L <[email protected]>
Signed-off-by: Sunil V L <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple HSM drivers so add a simple
FDT based HSM driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
It should possible to fixup FDT from any part of OpenSBI so add
fdt_register_general_fixup() which allows dynamic registration of
FDT fixup callbacks.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI based system suspend driver.
To test this, execute the follwoing in Linux:
$ echo mem > /sys/power/state
To wake up, execute the following command on qemu monitor terminal:
(qemu) system_wakeup
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple system suspend drivers so add a
simple FDT based system suspend driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI based driver for system reset and enable it in the generic
platform defconfig
Signed-off-by: Rahul Pathak <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The RISC-V Platform Management Interface (RPMI) defines a messaging protocol
and shared memory based transport for bi-directional communication with an
on-chip or external microcontroller.
To support RPMI in OpenSBI, add:
1) The RPMI messaging protocol defines and helper macros
2) A FDT mailbox driver for the RPMI shared memory transport
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Subrahmanya Lingappa <[email protected]>
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a simple FDT based mailbox framework which is built on top of the generic
mailbox library. The phandle of FDT mailbox DT node is treated as the unique
mailbox controller ID which is required by the generic mailbox library. The
FDT based mailbox drivers will be probed on-demand from fdt_mailbox_request_chan()
called by the mailbox client drivers.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add generic mailbox library which is independent of hardware description
format. The OpenSBI platform support or mailbox drivers can register
mailbox controller instances which can be discovered and used by different
mailbox client drivers. Each mailbox controller instance has a unique ID
which can be used by mailbox client drivers for find the mailbox controller
instance. The mailbox client drivers will typically request a mailbox channel
from the mailbox controller and use it to do data transfer with the remote
end of mailbox channel.
Signed-off-by: Anup Patel <[email protected]>
|
|
The timer driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_timer_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The serial driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_serial_init() first
attempts to match the chosen stdout device, and upon failure matches the
first available serial device in the DT. It is a fatal error if no such
device is found. This matches the behavior of fdt_driver_init_one().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The reset driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_reset_init() performs a
best-effort initialization of all matching DT nodes. Platform-specific
logic expects exactly one DT node to match a single driver. This is
accomplished by using fdt_driver_init_one() with a local list containing
that one driver.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The regmap driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The ipi driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_ipi_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The i2c driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
FDT gpio drivers have an extra .xlate operation, so they need to embed
the `struct fdt_driver` inside the subsystem-specific type. The gpio
subsystem always initializes the driver for a specific DT node.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, each driver subsystem contains its own code for matching
drivers against the platform's devicetree blob. This bloats firmware
size because the several FDT scanning loops are almost exact copies of
each other, and is confusing because the loops do have some subtle
differences. Furthermore, the existing match algorithm is inefficient:
it scans the FDT structure separately for each driver in the list. A
faster algorithm scans the FDT blob only once, matching all drivers in
the list for each `compatible` property seen.
Add new helpers implementing this faster algorithm. Since they must
iterate through the list of drivers, the driver structure cannot be
opaque. However, since the driver list is an array of pointers, the
`struct fdt_driver` can be embedded in a subsystem-specific driver
structure if needed. These three helpers cover all existing use cases
for driver initialization within OpenSBI.
An additional benefit of centralized driver initialization is the
consistent use of fdt_node_is_enabled().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI irqchip core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, each platform keeps track of which irqchip driver is in use
and calls its warm init function. Since the generic platform may use
multiple irqchip drivers, it has logic to track an array of drivers.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The per-hart PLIC pointer is not really specific to FDT platforms. Move
it into the main driver and drop the extra wrapper functions.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Move the PLIC save/restore functions inside the driver, so they can be
reused on any platform that needs them. The memory needed to store the
PLIC context is also allocated by the driver. The PM data cannot be
completely encapsulated, as some platforms (including Allwinner D1) need
to program the IRQ enable status to a sideband interrupt controller for
wakeup capability.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This removes platform-specific arguments to plic_warm_irqchip_init(),
which makes the driver independent from the platform after cold init,
and allows for further refactoring.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This needs to be in the base PLIC driver as part of the power management
save/restore flow.
This is also in preparation for moving the PLIC information in the
scratch area to the base PLIC driver. After that change, the FDT PLIC
layer will be unable to look up the `struct plic_data` after cold boot.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
