| Age | Commit message (Collapse) | Author |
|---|
|
FDT based I2C framework on the top of I2C library.
The drivers are probed on demand by fdt_i2c_adapter_get
function.
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
Helper library to keep track of registered I2C adapters,
identified by dts offset, basic send/read functions and
adapter configuration (enable, set dividers, etc...).
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
Move driver init code to separate function, so it can be reused
elsewhere.
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Tested-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Nikita Shubin <[email protected]>
|
|
The initialization of a reset driver may fail for various reasons, like
a PMIC based reset driver not finding the required I2C driver. The return
code of the init routine may take other error values than -ENODEV.
If the initialization of a reset driver fails, this should not lead to the
board hanging. It is enough that the reset driver does not call
sbi_system_reset_add_device() to avoid invoking the driver for a device
that could not be initialized.
Change the return type of fdt_reset_init() to void.
Print a message if an error occurs.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Dong Du <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Convert static array to sbi_list.
This removes size limitation, makes add/remove more efficient and
saves space.
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We simplify MTIMER synchronization as follows:
1) Detect MTIMER devices with unique (or non-shared) MTIME
register at boot-time
2) Select first MTIMER device with no associated HART as our
reference MTIMER device
3) Only synchronize MTIMER devices with unique (or non-shared)
MTIME register using reference MTIMER device
4) Directly update the MTIME register at time of synchronization
because MTIME is a read/write register.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add a simple FDT based GPIO framework which is built on top
of generic GPIO library. The phandle of FDT GPIO chip DT node
is treated as unique GPIO chip ID required by the generic GPIO
library. The FDT based GPIO chip drivers will be probed on-demand
from fdt_gpio_pin_get() called by the GPIO client drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add generic GPIO configuration library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or GPIO drivers can register GPIO chip instances which
can be discovered and used by different GPIO clients. Each GPIO
chip instance has a unique ID which can be used by GPIO clients
to lookup GPIO chip instance.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add common ACLINT MSWI library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add common ACLINT MTIMER library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
This patch adds support for the UART used by the NOEL-V processor.
Cobham Gaisler's NOEL-V RISC-V processor IP is available under GPL
and commercial license and is described in more detail at
https://www.gaisler.com/noelv.
Signed-off-by: Daniel Cederman <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
At present fdt_plic_fixup() accepts a 'compat' parameter for PLIC
compatible string. In preparation to support the new DT bindings,
drop this and use "riscv,plic0" directly in fdt_plic_fixup().
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The fdt_domain_get() function is now redundant because the
fdt_domains_populate() function can explicitly register new
domains using the sbi_domain_register() function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend fdt_iterate_each_domain() and fdt_iterate_each_memregion()
functions to allow underlying iteration function to fail. This will
help us catch more domain misconfiguration issues at boot time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add various helper routines to populate domains, iterate domains,
iterate domain memregions, and parse HART to domain assignment from
the FDT.
These helper routines can be used by platform support code and FDT
fixup code.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
C-Class is a member of the SHAKTI family of processors from Indian
Institute of Technology - Madras(IIT-M).
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
https://gitlab.com/shaktiproject/cores/c-class/blob/master/README.md
We add OpenSBI support for Shakti C-class SoC.
Signed-off-by: Vijai Kumar K <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This is achieved by removing the 'no-map' property from the
'reserved-memory' node when PMP is present, otherwise we keep it as it
offers a small protection if the OS does not map this region at all.
A new callback in platform_override is introduced and allows to fixup the
device-tree. It is used here to override this new default behaviour on
SiFive Fu540 platforms that has an erratum that prevents S-mode software
to access a PMP protected region using 1GB page table mapping.
If PMP is present, telling the OS not to map the reserved regions does not
add much protection since it only avoids access to regions that are already
protected by PMP. But by not allowing the OS to map those regions, it
creates holes in the OS system memory map and prevents the use of
hugepages which would generate, among other benefits, less TLB miss.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple reset framework which will select and use reset driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple serial framework which will select and use serial driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple irqchip framework which will select and use irqchip driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple ipi framework which will select and use ipi driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple timer framework which will select and use timer driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add fdt_parse_plic_node() function which will allow us to parse
a particular DT node as PLIC node. This will be useful in parsing
the DT node which we have found by matching compatible string.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add fdt_parse_max_hart_id() API which return max HART id based
on CPU DT nodes. This will be used by generic FDT based drivers in
subsequent patches.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Parsing HART id from a CPU DT node is a common requirement for
RISC-V systems. The newly added fdt_parse_hart_id() also helps
reduce duplicate code between fdt_cpu_fixup() function and
fdt_parse_hart_count() function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
We add fdt_parse_sifive_uart_node() function which will allow
us to parse a particular DT node as SiFive UART node. This will
be useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The fdt_get_node_addr_size() will be useful in FDT based simple
driver frameworks so we make it a public function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
This patch adds FDT match table based node lookup funcitons.
These functions will be useful in implementing simple FDT
based driver frameworks.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The fdt_parse_clint() is quite generic and can be used for other
types of devices so we rename it to fdt_parse_compat_addr().
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
