| Age | Commit message (Collapse) | Author |
|---|
|
According to Privileged ISA 19.2.11:
Modifying the floating-point state when V=1 causes both fields
(vsstatus.FS and the HS-level sstatus.FS) to be set to 3 (Dirty)
Fixes: 130e65dd9d44 ("lib: sbi: Implement SET_FS_DIRTY() to make sure the mstatus FS dirty is set")
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anirudh Srinivasan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
These macros can be used to decode rd' and set rd' in RVC instructions
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anirudh Srinivasan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
sbi_regs_prev_xlen reports the xlen of previous mode by decoding
from multiple CSRs including mstatus/hstatus/vsstatus
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anirudh Srinivasan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
- Add MXL encoding for calculating XLEN.
- Add instruction encoding for c.lbu/c.sb,
and imm encoding for multiple RVC insn.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anirudh Srinivasan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Decorate the sifive_cease to allow more compiler optimizations
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of parsing ISA extensions separately for each hart in the
generic_extensions_init() function, it is better to parse ISA extensions
for all available harts in the cold boot path. Also, this allows us
to remove fdt_isa_bitmap from scratch space and directly initialize
"extensions" in struct sbi_hart_features for each hart.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
UBSan (Undefined Behavior Sanitizer) is a tool implemented using
compiler instrumentation at runtime that allows checking for
statements whose output is not deterministic or defined by the C
standard. Compiling and running OpenSBI with UBSan instrumentation
will print a message in the console if any sentence performs such
an action.
Support involves two main components:
1. The UBSan implementation hooks (derived from NetBSD),
used by the compiler to handle the check output.
2. A test suite integrated with the SBI unit test framework to
verify correct operation at runtime.
Usage:
make UBSAN=y PLATFORM=generic ...
The test suite is built when both UBSAN=y and CONFIG_SBIUNIT=y are
enabled.
When UBSan is enabled, FW_PAYLOAD_OFFSET may need to be increased
due to the size increase added by the instrumentation. A
value of 0x400000 has been tested.
UBSan adds runtime overhead and is intended for development builds
only, not for production.
Note: This patch marks __stack_chk_guard in sbi_init.c as a weak
symbol to prevent multiple definition errors at compile time with
UBSan instrumentation enabled. This resolves the conflict
between the .globl definitions in sbi_init.c and test_head.S.
Signed-off-by: Marcos Oduardo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SBI MPXY notification header related offsets are missing from the
sbi_ecall_interface.h hence add these defines.
Signed-off-by: David E. Garcia Porras <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add rpmi_event_notification_state enum with disable, enable, and return
current state IDs. Also, add req_state field to rpmi_enable_notification_req
and current_state field to rpmi_enable_notification_resp for RPMI specification
compliance.
Add notification event ID enum and data structures for RPMI Performance
service group events: power change, limit change, and level change.
Signed-off-by: David E. Garcia Porras <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend struct sbi_irqchip_device to allow irqchip drivers advertise
interrupt controller capabilities (such as wired interrupt, MSIs, etc).
This further allows other parts of OpenSBI to lookup irqchip devices
based on capabilities.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The sbi_hart_pmp.c looks like a good place for the hart PMP CSR
access functions.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
PMP functions that deal with hart PMP CSRs are given a sbi_hart_ prefix,
to distinguish from RISC-V PMP encoding functions.
The is_pmp_entry_mapped() function is changed a little more, to align
with other PMP conventions, and made to return a bool to make it more
obvious that it returns a bool and not an SBI_ return code.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Create a new file for handling the RISC-V PMP format and the new pmp_t
type, as opposed to hart PMP CSR specific access.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add bit-field defines for the RPMI performance domain attributes flags
and fast-channel attributes flags as specified in the RPMI specification.
These are needed by platform implementations that provide RPMI
performance services (e.g. DVFS controllers).
Also add the missing db_write_value field to
rpmi_perf_get_fast_chn_attr_resp to match the RPMI spec layout.
Signed-off-by: David E. Garcia Porras <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch adds proper support for per-domain floating-point (FP) and
vector (V) contexts in the domain context switch logic. Each domain
now maintains its own FP and vector state, which is saved and restored
during domain switches.
Conditionalize FP and Vector save/restore based on extensions, unconditional
save and restore of floating-point (FP) and Vector registers fails on
generic platform firmware. This firmware must run on multiple platforms
that may lack these extensions.
Address this by conditionally executing FP save/restore only if the underlying
hart supports the F or D extensions. Similarly, perform Vector save/restore
only if the hart supports the Vector extension.
This improves support for multi-domain systems with FP and Vector
extensions, and prevents corruption of FP/Vector state during domain
switches.
Signed-off-by: Dave Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add support for saving and restoring RISC-V floating-point (F/D) extension
state in OpenSBI. This introduces a floating-point context structure and
helper routines to perform full context save and restore.
The floating-point context includes storage for all 32 FPi registers (f0–f31)
along with the fcsr control and status register. The register state is saved
and restored using double-precision load/store instructions (fsd/fld), and
single-precision load/store instructions (fsw/flw) on an RV64 system with
F and D-extension support.
The implementation follows an eager context switching model where the entire
FP state is saved and restored on every context switch. This avoids the need
for trap-based lazy management and keeps the design simple and deterministic.
Signed-off-by: Dave Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Eager context switch: Add support for saving and restoring RISC-V vector
extension state in OpenSBI. This introduces a per-hart vector context
structure and helper routines to perform full context save and restore.
The vector context includes vcsr CSRs along with storage for all 32 vector
registers. The register state is saved and restored using byte-wise vector
load/store instructions (vs8r/vl8r).
The implementation follows an eager context switching model where the entire
vector state is saved and restored on every context switch. This provides a
simple and deterministic mechanism without requiring lazy trap-based
management.
Signed-off-by: Dave Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some of the drivers (such as APLIC) require capability to registers
MSI handlers from the parent interrupt controller (such as IMSIC)
so add sbi_irqchip_register_msi_handler() for this purpose.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The irqchip drivers can provide mechanism to set interrupt affinity
so add hwirq_set_affinity() callback for irqchip drivers and use it
to implement sbi_irqchip_set_affinity() which can be used by other
drivers.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some of the hardware interrupts may be special so allow irqchip
drivers to make these hardware interrupts as reserved. Introduce
sbi_irqchip_register_reserved() for this purpose.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The interrupt client should be allowed to specify the line sensing
type of the hwirqs for which it is registering handler. To support
this, add hwirq_flags parameter to hwirq_setup() callback provided
by the irqchip driver.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The users of timer event have to compute next_event (aka timer value
in the future) based on desired units and unit frequency. Introduce
sbi_timer_compute_delta() and friends to simplify computing next_event
for timer event users.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, the sbi_timer only supports timer events configured via
SBI calls. Introduce struct sbi_timer_event and related functions
to allow configuring timer events from any part of OpenSBI.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add helper macro to extract hart index from scratch pointer. This
can be used to check whether scratch pointer belongs to a particular
hart or not.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The location of the RNMI/E trap vectors in the Smrnmi extension is
implementation-defined, so platforms with vendor-specific NMI vector
mechanisms must install the firmware's NMI entry points themselves.
Add an smrnmi_handlers_init() callback to sbi_platform_operations that
receives the firmware entry points and lets platform code install them
at the hardware-specific vector locations. Two pointers are passed:
- _trap_rnmi_handler: the dedicated RNMI entry point that saves
context using the Smrnmi MN* CSRs and returns via mnret.
- _trap_handler: the regular M-mode trap entry since RNME is taken
as a regular M-mode trap with NMIE=0.
When Smrnmi is present, install the platform's NMI vectors via the new
callback, initialize MNSCRATCH with the per-hart scratch pointer, and
set MNSTATUS.NMIE.
Smrnmi-enabled platforms must register smrnmi_handlers_init; if the
extension is detected but no callback is registered, sbi_panic() is
called since enabling NMIs without handlers in place would route
subsequent traps into nowhere.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/88b1470e1e3348d454b4b995a11a85c01914f7af.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement basic Resumable NMI (RNMI) handler support for the RISC-V
Smrnmi extension.
The new _trap_rnmi_handler assembly entry point saves context using the
Smrnmi MN* CSRs (MNSCRATCH, MNEPC, MNSTATUS, MNCAUSE) and returns via
mnret. It dispatches to sbi_trap_rnmi_handler(), which optionally calls
a platform-specific ops->rnmi_handler callback for actual NMI
processing. If no platform handler is registered or it fails, the
event is reported as an unhandled NMI.
The RNMI handler reuses the generic trap context structure but stores MN*
CSR values (MNEPC, MNSTATUS, MNCAUSE) into the corresponding generic
fields (mepc, mstatus, cause) for compatibility with existing trap
infrastructure.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/050ae6d2762ba8d5b9dfb3cc1960a23aa3d6c549.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
Add CSR definitions (MNSCRATCH, MNSTATUS, MNEPC, MNCAUSE) and bit definitions
(MNSTATUS_NMIE, MNSTATUS_MNPV, MNSTATUS_MNPP). Also add SBI_HART_EXT_SMRNMI to
the hart extension enumeration.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/1c6feb6d359b9827b3c2ad8f4f0e0a4dfd1de911.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
RNMI handlers use MNSCRATCH instead of MSCRATCH and need separate scratch
space from regular trap handling. Add tmp1 for RNMI context while tmp0
remains for regular traps.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/0a5d241fa1db03e71a3f56be24708cbbc8037e28.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
Add bitmap_empty() to check if bitmap has no bits set.
Unlike bitmap_weight() which calls sbi_popcount() on every word,
bitmap_empty() uses simple non-zero comparisons with early exit.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add necessary infra for implementing RPMI Management Mode
service group on platform microcontroller.
Co-authored-by: Sunil V L <[email protected]>
Signed-off-by: Ranbir Singh <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
To handle external interrupts in M-mode, the sbi_irqchip framework
must allow registering interrupt handlers from device drivers.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Allow locating irqchip device instance using a unique 32-bit ID. This
32-bit unique ID can be set by the irqchip driver at the time of adding
irqchip device.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a 32-bit unique ID to plic, aplic, and imsic data which can be
used to differentiate multiple irqchip devices.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
It is possible to have platform where an irqchip device targets
a subset of harts and there are multiple irqchip devices to cover
all harts.
To support this scenario:
1) Add target_harts hartmask to struct sbi_irqchip_device which
represents the set of harts targetted by the irqchip device
2) Call warm_init() and process_hwirqs() callbacks of an irqchip
device on a hart only if irqchip device targets that particular
hart
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform can have multiple APLICs in direct-mode targetting
different subset of harts. Add APLIC ID to hartindex map in
struct aplic_data to capture the set of harts targeted by a
given APLIC in direct-mode.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The irq_handle() callback of irqchip device is meant to process
hardware interrupt of the irqchip hence rename it accordingly.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The irqchip device represents an interrupt controller so use chip
as variable name instead of dev. This will avoid confusion as the
sbi_irqchip framework grows.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
UBSan detected undefined behavior in sbi_hart.c and sbi_fwft.c (in
the case of sbi_fwft.c, the bug comes from a macro call defined at
sbi_ecall_interface.h) caused by shifting a signed integer into the
sign bit (1 << 31)
This can be fixed by using the 1UL literal, ensuring defined arithmetic.
Please let me know if there’s any other most suitable solution for
this bug.
Signed-off-by: Marcos Oduardo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In sbi_domain.h, when checking if a memory region is a subset of
another, an undefined behavior arithmetic operation was caught
when sanitizing with UBSan (shift exponent __riscv_xlen).
This patch adds a check to handle the case where the region order
is __riscv_xlen, avoiding the illegal shift and ensuring the operation
remains defined.
Please let me know if there’s any other most suitable solution for
this bug.
Signed-off-by: Marcos Oduardo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, when we attempt to read the upper 32 bits of a firmware
counter on RV64 or higher, we just set `sbiret.value` to 0 without
validating the counter index. The SBI specification requires us to set
`sbiret.error` to `SBI_ERR_INVALID_PARAM` if the counter index points to
a hardware counter or an invalid counter. Add a validation check to
ensure compliance with the specification on RV64 or higher.
Fixes: 51951d9e9af8 ("lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi")
Signed-off-by: James Raphael Tiovalen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Altera provides a JTAG UART core that provides virtual UART over JTAG
and can coexist with their virtual JTAG. [1] This core has already been
supported by Linux and the programming interface has always been stable.
Add support for it to OpenSBI to ease JTAG prototype bringing up.
The driver follows the device tree binding in mainline Linux. [2]
[1] https://docs.altera.com/r/docs/683130/25.3/embedded-peripherals-ip-user-guide/jtag-uart-core
[2] https://github.com/torvalds/linux/blob/v6.19-rc1/Documentation/devicetree/bindings/serial/altr%2Cjuart-1.0.yaml
Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Try to initialize stack protection guard via the zkr extension.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce a FDT-based driver for the Andes Last Level Cache (LLC)
controller to support cache maintenance operations.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add functions to enable/disable the cache.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Refactor ATCSMU (System Management Unit) support by moving it from a
system utility into a dedicated FDT-based HSM driver.
Key changes include:
- Moving the functions in lib/utils/sys/atcsmu.c into the new HSM driver
- Moving hart start and stop operations on AE350 platform into the new
HSM driver
- Converting the assembly-based functions in sleep.S to C code for the
readability
- Updating the ATCWDT200 driver
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Fix "sbi_scratch" to "HART id" to better reflect its purpose.
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Update the OpenSBI version to 1.8 as part of release preparation.
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, OpenSBI fails to compile for LLVM=1 using 2025.11.27
riscv-gnu-toolchain with the following error:
In file included from opensbi/lib/utils/suspend/fdt_suspend_sifive_smc0.c:20:
opensbi/include/sbi_utils/hsm/fdt_hsm_sifive_inst.h:17:23: error: expected instruction format
17 | __asm__ __volatile__(".insn 0xfc000073" ::: "memory");
| ^
<inline asm>:1:8: note: instantiated into assembly here
1 | .insn 0xfc000073
| ^
In file included from opensbi/lib/utils/suspend/fdt_suspend_sifive_smc0.c:20:
opensbi/include/sbi_utils/hsm/fdt_hsm_sifive_inst.h:12:23: error: expected instruction format
12 | __asm__ __volatile__(".insn 0x30500073" ::: "memory");
| ^
<inline asm>:1:8: note: instantiated into assembly here
1 | .insn 0x30500073
| ^
2 errors generated.
To fix this compile error, use ".word" in-place ".insn".
Fixes: 1514a327306b ("lib: utils/hsm: Add SiFive TMC0 driver")
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
