| Age | Commit message (Collapse) | Author |
|---|
|
Update fw_event_validate_code, fw_counter_match_code and fw_counter_start
ops which used a 32 bit event code to use the 64 bit event data instead.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We reserve space for SBI implementation specific custom firmware
events which can be used by M-mode firmwares and HS-mode hypervisors
for their own use. This reserved space is intentionally large to
ensure that SBI implementation has enough space to accommodate
platform specific firmware events as well.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
To support 64 bit firmware counters on RV32 systems, we implement
sbi_pmu_counter_fw_read_hi() which returns the upper 32 bits of
the firmware counter value. On RV64 (or higher) systems, this
function will always return zero.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch adds a callback to fetch the number of bits implemented for a
custom firmware counter. If the callback fails or is not implemented then
width defaults to 63.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Starfive JH7110 I2C IP is synopsys designware.
Minimum StarFIve I2C driver to read/send bytes over I2C bus.
This allows querying information and perform operation of onboard PMIC,
as well as power-off and reset.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the system-suspend-test property is present in the domain config
node as shown below, implement system suspend with a simple 5 second
delay followed by a WFI. This allows testing system suspend when the
low-level firmware doesn't support it.
/ {
chosen {
opensbi-domains {
compatible = "opensbi,domain,config";
system-suspend-test;
};
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Only privileged domains should be allowed to suspend the entire
system. Give the root domain this property by default and allow
other domains to be given the property by specifying it in the
DT.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add the SUSP extension probe and ecall support, but for now the
system suspend function is just a stub.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
A coming patch can make use of a few internal hsm functions if
we export them.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The extid parameter of vendor_ext_provider() is redundant so let us
remove it.
Signed-off-by: Anup Patel <[email protected]>
|
|
As-per the SBI specification, the lower 24bits of the SBI vendor
extension id is same as lower 24bits of the mvendorid CSR.
We update the SBI vendor extension id checking based on above.
Signed-off-by: Anup Patel <[email protected]>
|
|
According to the description in "riscv-state-enable[0]", to access
h/scontext in S-Mode, we need to enable the 57th bit.
If it is not enabled, an "illegal instruction" error will occur.
Link: https://github.com/riscv/riscv-state-enable/blob/a28bfae443f350d5b4c42874f428367d5b322ffe/content.adoc [0]
Signed-off-by: Nylon Chen <[email protected]>
Reviewed-by: Zong Li <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In sbi_domain_finalize(), when locating the coldboot hart's domain,
the coldboot hart's scratch->arg1 will be overwritten by the domain
configuration. However scratch->arg1 holds the FDT address of the
coldboot hart, and is still being accessed by fdt_get_address() in
later boot process. scratch->arg1 could then contain completely
garbage and lead to a crash.
To fix this, we change fdt_get_address() to return root domain's
next_arg1 as the FDT pointer.
Resolves: https://github.com/riscv-software-src/opensbi/issues/281
Fixes: b1678af210dc ("lib: sbi: Add initial domain support")
Reported-by: Marouene Boubakri <[email protected]>
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add console_puts() callback in the console device which allows
console drivers (such as semihosting) to implement a specialized
way to output character string.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
We add sbi_domain_check_addr_range() helper function to check
whether a given address range is accessible under a particular
domain.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
We add new sbi_ngets() which help us read characters into a
physical memory location.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
We add new sbi_nputs() which help us print a fixed number of characters
from a physical memory location.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add SBI debug console extension related defines to the
SBI ecall interface header.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
The BSWAPx() macros won't do any swapping for big-endian host
because the EXTRACT_BYTE() macro will pickup bytes in reverse
order. Also, the EXTRACT_BYTE() will generate compile error
for constants.
To fix this, we get remove the EXTRACT_BYTE() macro and re-write
BSWAPx() using simple mask and shift operations.
Fixes: 09b34d8cca51 ("include: Add support for byteorder/endianness
conversion")
Reported-by: Samuel Holland <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
If any variable/memory-location follows certain
endianness then its important to annotate it properly
so that proper conversion can be done before read/write
from that variable/memory.
Also, use these new typedefs in libfdt_env.h for deriving
its own custom fdtX_t types
Signed-off-by: Rahul Pathak <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Define macros general byteorder conversion
Define functions for endianness conversion
from general byteorder conversion macros
Signed-off-by: Rahul Pathak <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Sergey Matyukevich <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since the availability and latency properties of CPU idle states depend
on the specific SBI HSM implementation, it is appropriate that the idle
states are added to the devicetree at runtime by that implementation.
This helper function adds a platform-provided array of idle states to
the devicetree, following the SBI idle state binding.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
Add the RW section offset, provided by _fw_rw_offset symbol,
to the scratch structure. This will be used to program
separate pmp entry for RW section.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch adds atcsmu support for Andes AE350 platforms. The SMU
provides system management capabilities, including clock, reset
and power control based on power domain partitions.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Provide __always_inline to sbi_types header.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Make use of generic warm-boot path when platform hart_stop callback
returns SBI_ENOTSUPP, in case certain hart can not turn off its
power domain, or it detects some error occured in power management
unit, it can fall through warm-boot flow and wait for interrupt in
sbi_hsm_hart_wait().
Also improves comment in sbi_hsm_hart_wait().
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The M-mode regions can only be added to the root domain. The non-root
domains shouldn't be able to add them from FDT.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
|
|
Split the permissions for M-mode and SU-mode. This would
help if different sections of OpenSBI need to be given
different permissions and if M-mode has different permisssions
than the SU-mode over a region.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
|
|
'priv' argument of sbi_hsm_hart_start() and sbi_hsm_hart_suspend()
may mislead people to think it stands for 'privilege mode', but it
is not. Change it to 'arg1' to clearly indicate the a1 register.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.
If this platform callback is not available then any HART can do cold
boot initialization.
Signed-off-by: Anup Patel <[email protected]>
|
|
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Samuel Holland <[email protected]>
|
|
This patch updates OpenSBI version to 1.2 as part of
release preparation.
Signed-off-by: Anup Patel <[email protected]>
|
|
save/restore helpers
Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
save/restore helpers
Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add FDT driver for Renesas SCIF.
dts example:
soc: soc {
....
scif0: serial@1004b800 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004b800 0 0x400>;
interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
<414 IRQ_TYPE_LEVEL_HIGH>,
<415 IRQ_TYPE_LEVEL_HIGH>,
<413 IRQ_TYPE_LEVEL_HIGH>,
<416 IRQ_TYPE_LEVEL_HIGH>,
<416 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
clock-names = "fck";
power-domains = <&cpg>;
resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
status = "disabled";
};
....
};
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add Renesas SCIF driver.
Based on a patch in the BSP by Takeki Hamada
<[email protected]>
Link: https://github.com/renesas-rz/rz_opensbi/commits/work/OpenSBI-PMA
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Instead of hard-coding the list of extensions in C code, use carray to
generate the list of extensions.
Using carray makes adding and removing extensions slightly cleaner. This
also paves the way for using Kconfig to disable unneeded extensions.
Signed-off-by: Vivian Wang <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since we can get the PLMT base address and timer frequency from
device tree, move plmt timer device to fdt timer framework.
dts example (Quad-core AX45MP):
cpus {
...
timebase-frequency = <0x3938700>;
...
}
soc {
...
plmt0@e6000000 {
compatible = "andestech,plmt0";
reg = <0x00 0xe6000000 0x00 0x100000>;
interrupts-extended = <&cpu0_intc 0x07
&cpu1_intc 0x07
&cpu2_intc 0x07
&cpu3_intc 0x07>;
};
...
}
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix minor grammar issue in function description.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
%s/Priviledge/Privilege
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The platform-specific extension_init callback is supposed to
set specific things for the platform opensbi is running on.
So it's also the right place to override specific hart_features
if needed - when it's know that autodetection has provided
wrong results for example.
Suggested-by: Atish Patra <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Platforms may need to override auto-detected hart features
in their override functions. So move the hart_features
struct to the sbi_hart.h header allowing us to pass it over
to platform-handlers.
Suggested-by: Atish Patra <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Don't spread checking for pmu extensions through the code
but instead introduce a sbi-pmu function that other code can
call to get the correct information about the existence of the
pmu interrupt.
Add a sbi_pmu_device override function to allow overridung this
bit as well if needed.
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
We add RISC-V semihosting based serial console for JTAG based early
debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Kautuk Consul <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The GVA bit is in mstatus on RV64, and in mstatush in RV32. Refactor
code handling this in sbi_trap_handler into a helper function to extract
GVA from sbi_trap_regs, so that future code accessing GVA can be
XLEN-agnostic.
Signed-off-by: Vivian Wang <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The sbi_pmu.h should only include minimal required headers whereas
sbi_pmu.c should include all required headers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend SBI PMU implementation to allow custom PMU device operations
which a platform can use for platform specific quirks.
The custom PMU device operations added by this patch include:
1) Operations to allow a platform implement custom firmware events.
These custom firmware events can be SBI vendor extension related
events or platform specific per-HART events are not possible to
count through HPM CSRs.
2) Operations to allow a platform implement custom way for enabling
(or disabling) an overflow interrupt (e.g. T-Head C9xx).
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, we have 32 elements (i.e. SBI_PMU_FW_EVENT_MAX) array of
"struct sbi_pmu_fw_event" for each of 128 possible HARTs
(i.e. SBI_HARTMASK_MAX_BITS).
To reduce memory usage of OpenSBI, we update FW counter implementation
as follows:
1) Remove SBI_PMU_FW_EVENT_MAX
2) Remove "struct sbi_pmu_fw_event"
3) Create per-HART bitmap of XLEN bits to track FW counters
which are started on each HART
4) Create per-HART uint64_t array to track values of FW
counters on each HART.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
