| Age | Commit message (Collapse) | Author |
|---|
|
UBSan detected undefined behavior in sbi_hart.c and sbi_fwft.c (in
the case of sbi_fwft.c, the bug comes from a macro call defined at
sbi_ecall_interface.h) caused by shifting a signed integer into the
sign bit (1 << 31)
This can be fixed by using the 1UL literal, ensuring defined arithmetic.
Please let me know if there’s any other most suitable solution for
this bug.
Signed-off-by: Marcos Oduardo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In sbi_domain.h, when checking if a memory region is a subset of
another, an undefined behavior arithmetic operation was caught
when sanitizing with UBSan (shift exponent __riscv_xlen).
This patch adds a check to handle the case where the region order
is __riscv_xlen, avoiding the illegal shift and ensuring the operation
remains defined.
Please let me know if there’s any other most suitable solution for
this bug.
Signed-off-by: Marcos Oduardo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, when we attempt to read the upper 32 bits of a firmware
counter on RV64 or higher, we just set `sbiret.value` to 0 without
validating the counter index. The SBI specification requires us to set
`sbiret.error` to `SBI_ERR_INVALID_PARAM` if the counter index points to
a hardware counter or an invalid counter. Add a validation check to
ensure compliance with the specification on RV64 or higher.
Fixes: 51951d9e9af8 ("lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi")
Signed-off-by: James Raphael Tiovalen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Altera provides a JTAG UART core that provides virtual UART over JTAG
and can coexist with their virtual JTAG. [1] This core has already been
supported by Linux and the programming interface has always been stable.
Add support for it to OpenSBI to ease JTAG prototype bringing up.
The driver follows the device tree binding in mainline Linux. [2]
[1] https://docs.altera.com/r/docs/683130/25.3/embedded-peripherals-ip-user-guide/jtag-uart-core
[2] https://github.com/torvalds/linux/blob/v6.19-rc1/Documentation/devicetree/bindings/serial/altr%2Cjuart-1.0.yaml
Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Try to initialize stack protection guard via the zkr extension.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce a FDT-based driver for the Andes Last Level Cache (LLC)
controller to support cache maintenance operations.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add functions to enable/disable the cache.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Refactor ATCSMU (System Management Unit) support by moving it from a
system utility into a dedicated FDT-based HSM driver.
Key changes include:
- Moving the functions in lib/utils/sys/atcsmu.c into the new HSM driver
- Moving hart start and stop operations on AE350 platform into the new
HSM driver
- Converting the assembly-based functions in sleep.S to C code for the
readability
- Updating the ATCWDT200 driver
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Fix "sbi_scratch" to "HART id" to better reflect its purpose.
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Update the OpenSBI version to 1.8 as part of release preparation.
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, OpenSBI fails to compile for LLVM=1 using 2025.11.27
riscv-gnu-toolchain with the following error:
In file included from opensbi/lib/utils/suspend/fdt_suspend_sifive_smc0.c:20:
opensbi/include/sbi_utils/hsm/fdt_hsm_sifive_inst.h:17:23: error: expected instruction format
17 | __asm__ __volatile__(".insn 0xfc000073" ::: "memory");
| ^
<inline asm>:1:8: note: instantiated into assembly here
1 | .insn 0xfc000073
| ^
In file included from opensbi/lib/utils/suspend/fdt_suspend_sifive_smc0.c:20:
opensbi/include/sbi_utils/hsm/fdt_hsm_sifive_inst.h:12:23: error: expected instruction format
12 | __asm__ __volatile__(".insn 0x30500073" ::: "memory");
| ^
<inline asm>:1:8: note: instantiated into assembly here
1 | .insn 0x30500073
| ^
2 errors generated.
To fix this compile error, use ".word" in-place ".insn".
Fixes: 1514a327306b ("lib: utils/hsm: Add SiFive TMC0 driver")
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
When using debug builds, aka., DEBUG=1, csr_write_num() function can
trigger stack overflow. This is caused by the large amount of macro
expansion of csr_write(...), which, under debug builds, will generate
massive amount of stack variables (tested with GCC 13.2.0). The issue
is masked previously as we didn't have too many csr_write()'s before
commit 55296fd27c0c, but now, it does overflow the default 4KB stack.
The csr_read(relaxed) macros already use the "register" modifier to
optimize stack usage (perhaps unknowingly?), so this patch just
follows suit.
Fixes: 55296fd27c0c ("lib: Allow custom CSRs in csr_read_num() and csr_write_num()")
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Previously we assume only 1 UART8250 instance can be used. Now we support
multiple instances by introducing counterpart functions to putc/getc/init
which take an extra *dev parameter, and name them as uart8250_device_xyz()
The original functions without the *dev parameter will operate on the
default instance exactly the same as before, so no changes on the caller
is required.
Note: uart8250_device_init only does device initialization without the
console registration logic.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
By default the OpenSBI itself is covered by 2 memregions for RX/RW
sections. This is required by platforms with Smepmp to enforce
proper permissions in M mode. Note: M-mode only regions can't
have RWX permissions with Smepmp. Platforms with traditional PMPs
won't be able to benefit from it, as both regions are effectively
RWX in M mode, but usually it's harmless to so. Now we provide
these platforms with an option to disable this logic. It saves 1
PMP entry. For platforms really in short of PMPs, it does make a
difference.
Note: Platform requesting single OpenSBI memregion must be using
traditional (old) PMP. We expect the platform code to do
the right thing.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The helper function is renamed as sbi_domain_memregion_is_subset,
and made public in header file.
Also add a convenient helper of sbi_domain_for_each_memregion_idx.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Factor out logic in `sbi_hart_oldpmp_configure` into function
`sbi_domain_get_oldpmp_flags`, analogous to `sbi_domain_get_smepmp_flags`.
Platform specific hart-protection implementation can now leverage it.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
sbi_hart_pmp_fence can now be utilized by other hart-protection
implementation.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The __sbi_sfence_vma_all() can be shared by different parts of
OpenSBI so rename __tlb_flush_all() to __sbi_sfence_vma_all()
and make it global function.
Signed-off-by: Andrew Waterman <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The PMP programming is a significant part of sbi_hart.c so factor-out
this into separate sources sbi_hart_pmp.c and sbi_hart_pmp.h for better
maintainability.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The sbi_hart_pmp_xyz() and sbi_hart_map/unmap_addr() functions can
now be replaced by various sbi_hart_protection_xyz() functions.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, PMP and ePMP are the only hart protection mechanisms
available in OpenSBI but new protection mechanisms (such as Smmpt)
will be added in the near future.
To allow multiple hart protection mechanisms, introduce hart
protection abstraction and related APIs.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, the unconfiguring PMP is implemented directly inside
switch_to_next_domain_context() whereas rest of the PMP programming
is done via functions implemented in sbi_hart.c.
Introduce a separate sbi_hart_pmp_unconfigure() function so that
all PMP programming is in one place.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
While FENCE.TSO is only specified with them set to zero, it is a special
case of FENCE, which needs to ignore these otherwise reserved fields, but
in some implementations, namely XuanTie C906 and C910, apparently does not.
See the RISCVuzz paper by Thomas et al. for details.
Signed-off-by: Benedikt Freisen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A previous editor or formatter script appears to have been confused by a
diff view, where the prepended + or - changes the way tabs are displayed.
Since it is the file itself that matters, adjust that accordingly.
Signed-off-by: Benedikt Freisen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Since plain "char" is implicitly unsigned on RISC-V, "s8" should be an alias for "signed char".
Signed-off-by: Benedikt Freisen <[email protected]>
Reviewed-by: Radim Krčmář <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The QoS Identifiers extension (Ssqosid) introduces the srmcfg register,
which configures a hart with two identifiers: a Resource Control ID
(RCID) and a Monitoring Counter ID (MCID). These identifiers accompany
each request issued by the hart to shared resource controllers.
If extension Smstateen is implemented together with Ssqosid, then
Ssqosid also requires the SRMCFG bit in mstateen0 to be implemented. If
mstateen0.SRMCFG is 0, attempts to access srmcfg in privilege modes less
privileged than M-mode raise an illegal-instruction exception. If
mstateen0.SRMCFG is 1 or if extension Smstateen is not implemented,
attempts to access srmcfg when V=1 raise a virtual-instruction exception.
This extension can be found in the RISC-V Instruction Set Manual:
https://github.com/riscv/riscv-isa-manual
Changes in v5:
- Remove SBI_HART_EXT_SSQOSID dependency SBI_HART_PRIV_VER_1_12
Changes in v4:
- Remove extraneous parentheses around SMSTATEEN0_SRMCFG
Changes in v3:
- Check SBI_HART_EXT_SSQOSID when swapping SRMCFG
Changes in v2:
- Remove trap-n-detect
- Context switch CSR_SRMCFG
Signed-off-by: Chen Pei <[email protected]>
Reviewed-by: Radim Krčmář <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Before this patch sbi_pmu_ctr_start() ignores flags received in
sbi_pmu_ctr_cfg_match() including inhibit ones. To prevent it,
save flags together with event_data and use them both in
sbi_pmu_ctr_start().
Fixes: 1db95da2997b ("lib: sbi: sbi_pmu: fixed hw counters start for hart")
Signed-off-by: Shifrin Dmitry <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for performance.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for device power.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add voltage service group for RPMI/MPXY support
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add fw_smepmp_ids bitmap to track PMP entries that protect firmware
regions. Allow us to preserve these critical entries across domain
transitions and check inconsistent firmware entry allocation.
Also add sbi_hart_smepmp_is_fw_region() helper function to query
whether a given SmePMP entry protects firmware regions.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
During domain context switches, all PMP entries are reconfigured
which can clear firmware access permissions, causing M-mode access
faults under SmePMP.
Sort domain regions to place firmware regions first, ensuring
consistent firmware PMP entries so they won't be revoked during
domain context switches.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a new memregion flag, SBI_DOMAIN_MEMREGION_FW and mark the
OpenSBI code and data regions.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Move sbi_hart_get_smepmp_flags() from sbi_hart.c to sbi_domain.c and
rename it to sbi_domain_get_smepmp_flags() to better reflect its
purpose of converting domain memory region flags to PMP configuration.
Also removes unused parameters (scratch and dom).
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive SMC0 controls the clock and power domain of the core complex
on the SiFive platform. The core complex enters the low power state
after the secondary cores enter the tile power gating and last core
execute the `CEASE` instruction with the corresponding SMC0
configurations. The devices that inside both tile power domain and core
complex power domain will be off, including caches and timer. Therefore
we need to flush the last level cache before entering the core complex
power gating and update the timer after waking up.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The last core who performs the system suspend is responsible for
restoring the system after waking up. Add the system_resume callback for
restoring the system from suspend.
Suggested-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Exposing the ACLINT timer update APIs so the user can update the mtimer
after waking up from the non-retentive suspend.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive TMC0 controls the tile power domains on SiFive platform. The
CPU enters the low power state via the `CEASE` instruction after
configuring the TMC0. Any devices that inside the tile power domain will
be power gated, including the private cache. Therefore flushing the
private cache before entering the low power state.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Reviewed-by: Cyan Yang <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform may contain multiple IPI devices. In certain use cases,
such as power management, it may be necessary to send an IPI through a
specific device to wake up a CPU. For example, if an IMSIC is powered
down and reset, the core cannot receive IPIs from it, so the wake-up must
instead be triggered through the CLINT.
Suggested-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Since the APLIC may enter a reset state upon system wake-up from a
platform low power state, adding a restore function to reinitialize
the APLIC.
Reviewed-by: Yong-Xuan Wang <[email protected]>
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Using ISA string "xsfcease" to detect the support of the custom
instruction "CEASE".
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Using ISA string "xsfcflushdlone" to detect the support of the
SiFive L1D cache flush custom instruction.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the helpers to build up the cache hierarchy via FDT and provide some
cmo functions for the user who want to flush the entire cache.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the FDT cache library so we can build up the cache topology via the
'next-level-cache' DT property.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Andy Chiu <[email protected]>
Signed-off-by: Andy Chiu <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The current RISC-V CMO only defines how to flush a cache block. However,
certain use cases, such as power management, may require flushing the
entire cache. Therefore, a framework is being introduced to allow vendors
to flush the entire cache using their own methods.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some of the platforms use platform specific CSR access functions for
configuring implementation specific CSRs (such as PMA registers).
Extend the common csr_read_num() and csr_write_num() to allow custom
CSRs so that platform specific CSR access functions are not needed.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The fdt_ipi_init() is already called from generic_early_init() so
let's convert IPI drivers as early drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The platform specfic IPI init is not need anymore because using
IPI device rating multiple IPI devices can be registered in any
order as part of the platform specific early init.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform can have multiple IPI devices (such as ACLINT MSWI,
AIA IMSIC, etc). Currently, OpenSBI rely on platform calling
the sbi_ipi_set_device() function in correct order and prefer
the first avaiable IPI device which is fragile.
Instead of the above, introduce IPI device rating and prefer
the highest rated IPI device. This further allows extending
the sbi_ipi_raw_clear() to clear all available IPI devices.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
