| Age | Commit message (Collapse) | Author |
|---|
|
FDT helper file contain both fdt fixup and parsing functions.
Split the fixup related functions to a separate file for a better code
organization.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Different DT based platforms from the sam family may reuse IP blocks with
different configurations. These different configurations can be obtained
by parsing the device tree.
Add a FDT parser framework that can parse various device configurations from
device tree. Currently, the parsing algorithms doesn't cover all the use cases
or possible combination of DT configurations. It will be improved over time.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Commit 71d2b837c46e (lib: Move all coldboot wait APIs to sbi_init.c)
caused a regression while moving the code from sbi_hart.c to sbi_init.c.
As per original commit text, WFI can be implemented as a NOP according
to the RISC-V privilege specification. Software should ensure that
relevant interrupt pending bits are set. Otherwise, loop back to WFI.
Fix the regression by applying the original patch to sbi_init.c.
Fixes: 71d2b837c46e ("lib: Move all coldboot wait APIs to sbi_init.c")
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The original code does not prevent the following scenarios:
> sbi_ecall_register_extension(ext1); /* extension id (70-80) */
> sbi_ecall_register_extension(ext2); /* extension id (50-100) */
Signed-off-by: Xiang Wang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
A platform can have discontinuous and/or sparse HART ids so we
cannot always assume a set of HARTs with continuous HART ids.
This patch adds support for discontinuous and sparse HART ids by
introducing HART index to HART id table. This table has platform
hart_count entries and it maps HART index to HART id.
The HART index to HART id table has only two restrictions:
1. HART index < sbi_platform hart_count
2. HART id < SBI_HARTMASK_MAX_BITS
Example1:
Let's say we have a platform with 2 HART ids 11 and 22, for such a
a platform:
hart_count = 2
hart_index2id[0] = 11
hart_index2id[1] = 22
Example2:
Let's say we have a platform with 5 HARTs ids 0, 1, 2, 3, and 4
but out of these HART with id 0 is not usable so for such a platform:
hart_count = 5
hart_index2id[0] = -1U
hart_index2id[1] = 1
hart_index2id[2] = 2
hart_index2id[3] = 3
hart_index2id[4] = 4
OR
hart_count = 4
hart_index2id[0] = 1
hart_index2id[1] = 2
hart_index2id[2] = 3
hart_index2id[3] = 4
With HART index to HART id table in place, the hart_disabled()
callback is now redundant so we remove it as well.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We don't need to use sbi_platform_hart_count() in sbi_init and
sbi_scratch because checking sbi_platform_hart_disabled() or
return value of sbi_hartid_to_scratch() is sufficient.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Checking return value of sbi_hartid_to_scratch() is sufficient
so no need to explicitly check for disabled HART using the
sbi_platform_hart_disabled() API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The scratch parameter in sbi_hsm_hart_started_mask() API is now
redundant hence removing it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We remove usage of sbi_platform_hart_count() API from sbi_hsm
so that discontinuous and sparse HART ids can be supported.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As a step towards supporting discontinuous and sparse HART ids, we
don't set hartid_to_scratch table for disabled HARTs.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The sbi_hartid_to_scratch() API can fail for non-existent HARTs so
all uses of sbi_hartid_to_scratch() API should check return value.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We remove redundant scratch parameter from sbi_tlb_entry_process()
function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We remove redundant scratch parameter from sbi_hsm_hart_get_state()
and sbi_hsm_hart_started() APIs.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This patch simplify HART id to scratch macro as follows:
1. Remove current "scratch" pointer argument because now we
use HART id to scratch table
2. Rename sbi_hart_id_to_scratch() to sbi_hartid_to_scratch()
to have macro name consistent with the name of callback
in struct sbi_scratch
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of calling hartid_to_scratch() callback every time when
we want sbi_scratch pointer from HART id, we create a table of
sbi_scratch pointers and use that to get sbi_scratch pointer.
As a result of HART id to scratch table, the conversion of
HART id to sbi_scratch pointer is just 2-3 instructions which
was 9 instructions previously.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This adds a general device tree fix-up helper to do all required
device tree fix-ups for a typical platform.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add a helper routine to updates the "status" property of a CPU node
in the device tree to "disabled" if that hart is in disabled state.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that we have a dedicated fdt_helper.c file for DT releated
helper routines, move plic_fdt_fixup() codes from plic.c to
fdt_helper.c and rename it to fdt_plic_fixup() at the same time,
to keep name consistency in the same file.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Add a helper routine to insert a child node of the reserved memory
node in the device tree that describes the protected memory region
done by OpenSBI via PMP.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Pull fdt_addresses.o in for fdt_address_cells() & fdt_size_cells().
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently pmp_get() returns the log2 length of the PMP memory
region size. The caller has to calculate the size based on that
and the same codes are duplicated.
Update this function to return decoded size directly.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Now that sbi_hart_id_to_scratch() is optimized, we don't need
the "if ()" statement. Also, the hstate local variable is
redundant so we remove that as well.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The sbi_hart_id_to_scratch() just forwards call to firmware specific
hartid_to_scratch() callback so we make sbi_hart_id_to_scratch() as
macro in sbi_scratch.h instead of regular function in sbi_hart.c.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Sync with latest libfdt v1.5.1 release source codes.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add two macros in preparation to sync libfdt codes to latest v1.5.1
release from upstream.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Compile time checks of __riscv_compressed can only check if OpenSBI is
being compiled using compressed instructions or not. Checking this macro
does not indicate if an instruction that generated a misaligned trap is
a compressed instruction or not.
Since the misaligned trap handling code inspects instructions _C_ bits
to detect compressed instructions, we can remove all static checks on
__riscv_compressed and dissociate hanlding of misaligned traps and
OpenSBI compilation.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The HART available mask and related APIs are now totally redundant
because of more extensive HART state machine implemented by sbi_hsm.
Due to above, we remove HART available mask and related APIs.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask() API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask() API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This patch introduce sbi_hsm_hart_started_mask() API as
a replacement of sbi_hart_available_mask() API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
The coldboot_wait_bitmap is of fixed size and has __riscv_xlen
bits. This limits us to scale beyond __riscv_xlen HARTs hence
we replace coldboot_wait_bitmap with coldboot_wait_hmask which
is of type struct sbi_hartmask.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The coldboot wait APIs are only used by sbi_init.c so no point in
having coldboot related code in sbi_hart.c.
As per-above rationale, we move all coldboot wait related APIs to
sbi_init.c as static/local functions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Instead of using single ulong as source mask for sbi_tlb_info,
we use sbi_hartmask. This way sbi_tlb_info can easily scale
for large number of HARTs.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We introduce SBI_TLB_INFO_INIT() helper macro to help easy
initialization of struct sbi_tlb_info which is passed to the
sbi_tlb_request() API.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We only allow HARTs with HARTID less than SBI_HARTMASK_MAX_BITS in
sbi_init() function so that sbi_hartmask can safely used across
OpenSBI sources.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple bitmap library which will help us create and maintain
bitmaps. It will also help us create a simple HART mask library.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This fixes various coding style issues found in the serial codes.
No functional changes.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This fixes various coding style issues found in the SBI codes.
No functional changes.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch extends our bit operation library with mechanism to:
1. Iteratively traverse bits
2. Set bit
3. Clear bit
4. Change bit
5. ... other helpful functions ...
Most the above is adopted from Xvisor sources.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The right location for all bits related defines and macros is
sbi_bitops.h hence this patch. With this patch, the sbi_bits.h
is redundant so we remove it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The return type of sbi_hsm_hart_started() should be bool.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As per the RISC-V privilege specification, WFI can be implemented as
a NOP. Software should ensure that relevant interrupt pending bits
are set. Otherwise, loop back to WFI.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This patch adds support HSM extension. The specification is available
at https://github.com/riscv/riscv-sbi-doc.
It allows to implement hart hotplug and fixed ordered hart booting in
supervisor.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
SBI HSM extension defines possible hart status values in the
specification.
Define all possible status values. Add a helper function to
convert hart state to status because hart states are internal
to OpenSBI only and may not match the status values defined in
the specification.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch adds support for hart hotplug in OpenSBI using a generic WFI
based approach. Hart hotplug can be achieved via SBI HSM extension which
allows supervisor mode software to start or stop any harts anytime.
Any platform wishes to implement platform specific hart hotplug must
implement both hart_start and hart_stop in addition to enable platform
feature SBI_PLATFORM_HAS_HART_HOTPLUG.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We don't need to separately call sbi_ipi_send() for current HART
in sbi_ipi_send_many(). Instead, we can simplify the for-loop in
sbi_ipi_send_many() and call sbi_ipi_send() for all HARTs in the
for-loop itself.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
As per the latest SBI specification, all online harts should receive
IPI if hbase is set to -1.
Set the target mask to all available hart mask if hbase is -1.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
