| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds unit tests for verifying the sbi_ecall version,
impid handling, and extension registration functions. The tests
ensure that the extension registration and unregistration work
as expected.
Signed-off-by: Akshay Behl <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Latest modifications to the spec mandates that a set on a lock feature
returns SBI_ERR_DENIED_LOCKED.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The T-HEAD C90x PLIC has some special quirks, such as the S-mode
delegation bit. OpenSBI currently handles this by checking the compatible
string in the device tree.
However, this matching is done in the order of the fdt_match array. So if
a device tree contains both strings, for example:
compatible = "thead,c900-plic", "riscv,plic0";
Then OpenSBI will match against the generic "riscv,plic0" string, since
that appears first in the fdt_match array. This means it will fail to set
the S-mode delegation bit, and Linux will fail to boot. In some cases, it
is not possible to change the compatible string to just the T-HEAD PLIC,
as older versions of Linux only recognize the RISC-V compatible string.
This patch fixes that by moving the RISC-V string to the end, ensuring
that the more specific options get matched first.
Signed-off-by: Alex Studer <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If a property value is too small, len will be zero after the division
on the next line, so the property will be ignored. This is the same
behavior as when the length check fails. Furthermore, the first two
length checks were already ineffectual, because each item in those
arrays is 12 bytes long, not 8.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The carray referencing these definitions assumes they are const.
Fixes: 6a26726e08e4 ("lib/utils: reset: Add RPMI System Reset driver")
Fixes: 13f55f33a1d3 ("lib: utils/suspend: Add RPMI system suspend driver")
Fixes: 33ee9b8240fe ("lib: utils/hsm: Add RPMI HSM driver")
Fixes: 591a98bdd549 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When called twice, sse_hart_mask()/sse_hart_unmask() should return
SBI_EALREADY_STOPPED/SBI_EALREADY_STARTED. This was currently inverted.
Fixes: b919daf49582 ("lib: sbi: Add support to mask/unmask SSE events")
Reported-by: Andrew Jones <[email protected]>
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the sbi_sse_init() in cold boot path is called after
sbi_domain_finalize() so boot HART of non-root domains will start
before SSE cold boot init which can cause warm boot of such HARTs
to crash in sbi_sse_init().
To address the above issue, factor-out the non-root domain startup
from sbi_domain_finalize() function as a separate sbi_domain_startup()
function which can be called after sbi_sse_init() in cold boot path.
Fixes: 93f7d819fdeb ("lib: sbi: sse: allow adding new events")
Signed-off-by: Anup Patel <[email protected]>
|
|
The latest SBI 3.0 spec defines a new sbi_mpxy_get_shmem_size()
function and simplifies sbi_mpxy_set_shmem() function so update
the MPXY framework and SBI extension accordingly.
Signed-off-by: Anup Patel <[email protected]>
|
|
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <[email protected]>
|
|
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <[email protected]>
|
|
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <[email protected]>
|
|
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The capability bit assignment in MPXY framework does not match the
SBI MPXY extension in latest SBI specification so update it.
Fixes: 7939bf1329eb ("lib: sbi: Add SBI Message Proxy (MPXY) framework")
Signed-off-by: Anup patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <[email protected]>
|
|
The mpxy_rpmi_mbox_data is provided by RPMI service group specific
MPXY driver to the common MPXY RPMI mailbox client implementation
so let's constantify mpxy_rpmi_mbox_data in mpxy_rpmi_mbox so that
it is not accidently modified.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <[email protected]>
|
|
With the "max" QEMU cpu, the displayed extension string is truncated due
to the buffer being too small. Increase it to 256 to display the full
set of extensions correctly.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
It is possible that hartid may not be sequential and it should not be validated
against SBI_HARTMASK_MAX_BITS. Instead we should check the index of the hartid,
hart index, against SBI_HARTMASK_MAX_BITS.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The domain_support.md documentation states that the enforce permission
bit (BIT[6]) could be set in the "regions" property of a domain
instance DT node. However, this bit is masked in the current
implementation. This patch unmasks the bit to make it configurable
from DT.
Signed-off-by: Chao Du <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
1. Initialize struct imsic_data imsic to 0 at definition to prevent the
use of uninitialized memory, ensuring the variable starts with known
values.
2. Remove the redundant memset call on the "aplic" parameter since the
memory for aplic is allocated using sbi_zalloc() by the caller
irqchip_aplic_cold_init(), which guarantees it is already set to 0.
Signed-off-by: Huang Borong <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add the PMU SSE event only if an overflow irq bit is present.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
If a standard event was not found in the list of events that are handled
by harts but belongs to the standard event list defined by the
specification, return SBI_ENOTSUPP. Without that, we can not
distinguish a non implemented standard event from a non valid one.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
In order to allow events to be dynamically added, remove the existing
static array of events and use a simply linked list of supported events.
This allows us to move the cb_ops into this list and associated it with
an event_id. Drivers can now register cb_ops before bringing up the sse
core to handle additional events (platform ones for instance).
sbi_sse_init() now allocates as many events as present in the linked
list. Events can now be added with sbi_sse_add_event() which allows to
add new supported events with some callback operations if any. If an
event is not to be supported, then sbi_sse_add_event() should not be
called. This approach currently consider that local events are to be
supported on all harts (ie, they all support the same ISA or
dependencies). If per-hart event availability needs to be supported,
then, an is_supported() callback could be added later and called for
each hart.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Since event support will be checked in the next commits, return a value
from sse_event_get() to allow propagating it. This will be used to
report SBI_ERR_NOT_SUPPORTED when an event isn't supported.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf68055 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Himanshu Chauhan <[email protected]>
|
|
Addition of "Experimental SBI Extensions" to the boot-time prints
disturbs the alignment of other prints so adjust all boot-time
prints accordingly.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add boot-time prints for list of available standard and experimental
SBI extensions.
Signed-off-by: Anup Patel <[email protected]>
|
|
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Improve 64-bit operation under rv32 and remove db_val_u32_hi
in rpmi_cppc_fc_db_trigger().
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The raw events have same event_idx. Thus, the event info sanity check
only relies on the select mask. The raw event check should be done first
so that regular hardware events can be verified using event idx range
check.
Fixes: e4345842168b ("lib: sbi_pmu: Implement SBI PMU event info function")
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The hardware event map function invoked from platform code should
exclude any raw events as there is a separate function for the raw
events.
Fixes: d8a483fc7fd0 ("lib: sbi_pmu: PMU raw event v2 support")
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The specification states that a6 contains the current hart id and
a7 contains the entry argument. This was inverted in the current
implementation.
Reported-by: Andrew Jones <[email protected]>
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.
As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.
Fixes: c2acc5e5b0d8 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The following error is observed when compiling fdt_cppc_rpmi
driver using LLVM:
lib/utils/cppc/fdt_cppc_rpmi.c:87:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
87 | u64 db_val_u64 = 0;
To fix the above issue, move the variable declaration at the
start of function.
Fixes: 591a98bdd549 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.
This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.
Co-developed-by: Zong Li <[email protected]>
Signed-off-by: Zong Li <[email protected]>
Signed-off-by: Nylon Chen <[email protected]>
Reviewed-by: Andy Chiu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce SBI Message Proxy (MPXY) framework which allows platform specific
code or drivers to register message protocol specific channels.
This framework enables the supervisor software to send messages belonging
to different message protocols via OpenSBI firmware.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Himanshu Chauhan <[email protected]>
Signed-off-by: Himanshu Chauhan <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI based driver for CPPC register read, write and probe.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Co-developed-by: Rahul Pathak <[email protected]>
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Sunil V L <[email protected]>
Signed-off-by: Sunil V L <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
