| Age | Commit message (Collapse) | Author |
|---|
|
The mseccfg.MML bit is a sticky bit which remains unchanged once set
so no need to clear it in sbi_hart_smepmp_configure().
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Mayuresh Chitale <[email protected]>
|
|
Let us factor-out Smepmp configuaration as separate function so
that code is more readable.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Mayuresh Chitale <[email protected]>
|
|
The sbi_hartmask_for_each_hart() macro is slow and has only one user
so let us completely remove the sbi_hartmask_for_each_hart() macro.
Signed-off-by: Anup Patel <[email protected]>
|
|
Let us maximize the use of HART index in sbi_domain because hartindex
based hartmask access and sbi_scratch lookup is faster.
Signed-off-by: Anup Patel <[email protected]>
|
|
The sbi_scratch_last_hartid() macro is not of much use on platforms
with really sparse hartids so let us replace use of this macro with
other approaches.
Signed-off-by: Anup Patel <[email protected]>
|
|
Let us prefer hartindex over hartid in IPI framework which in-turn
forces IPI users to also prefer hartindex.
Signed-off-by: Anup Patel <[email protected]>
|
|
The sbi_hartid_to_scratch() involves translating hartid to hartindex
which is expensive so let's use sbi_hartindex_to_scratch() instead.
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, the sbi_hartmask is indexed by hartid which puts a
limit on hartid to be less than SBI_HARTMASK_MAX_BITS.
We extend the sbi_hartmask implementation to use hartindex and
support updating sbi_hartmask using hartid. This removes the
limit on hartid and existing code works largely unmodified.
Signed-off-by: Xiang W <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The hartid to hartindex mapping is now tracked in sbi_scratch so we
don't need sbi_platform_hart_index() and sbi_platform_hart_invalid()
functions hence let us remove them.
Signed-off-by: Anup Patel <[email protected]>
|
|
We introduce HART index and related helper functions in sbi_scratch
where HART index is contiguous and each HART index maps to a physical
HART id such that 0 <= HART index and HART index < SBI_HARTMASK_MAX_BITS.
The HART index to HART id mapping follows the index2id mapping provided
by the platform. If the platform does not provide index2id mapping then
identity mapping is assumed.
Signed-off-by: Anup Patel <[email protected]>
|
|
If the system is defined from tlb_fifo_num_entries, the scratch may be
too small to hold the fifo, so it is alloc through the heap.
Signed-off-by: Xiang W <[email protected]>
Signed-off-by: Xing Xiaoguang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
For some platforms with a particularly high number of harts, if the
tlb fifo is too small, it case harts to wait. Platforms should be
allowed to specify the size of the tlb fifo.
Signed-off-by: Xiang W <[email protected]>
Signed-off-by: Xing Xiaoguang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
After the hardware hpm counter is stopped, it should not raise any new
interrupt as it is already stopped. So add the hw_counter_disable_irq
callback to allow the custom pmu device to control this behavior.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Samuel Holland <[email protected]>
|
|
When detecting features of PMU, the hpm counter may be written to some
value, this will cause some unexpected behavior in some cases. So ensure
the hpm counter is updated before starting the counter and the related
interrupt.
Signed-off-by: Haijiao Liu <[email protected]>
Co-authored-by: Inochi Amaoto <[email protected]>
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Samuel Holland <[email protected]>
|
|
The previous definition had the assumption that the machine word length
is equal to the word length of LONG. Remove this assumption and add a
static check to prevent errors in subsequent modifications.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
After supporting noncontigous hpm event and counters in opensbi, the
number of hpm counters can be calculated by the mhpm_mask. So this field
is unnecessary and can be removed to save some space.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This adds the support for ISA extension smcntrpmf. When some inhibit flags
are set by a lower privilege mode for new CSRs added by smcntrpmf, OpenSBI
sets the appropriate values correspondingly.
Signed-off-by: Kaiwen Xue <[email protected]>
Signed-off-by: Kaiwen Xue <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Cycle and instructions are hardware events instead of firmware ones. Fix
the typo in the name of this function.
Signed-off-by: Kaiwen Xue <[email protected]>
Signed-off-by: Kaiwen Xue <[email protected]>
Reviewed-by: Anup patel <[email protected]>
|
|
Currently, the fdt_parse_isa_extensions() tries to parse the ISA
string once for each HART. This ISA string parsing can fail for
secondary HARTs if the FDT memory is already overwritten by the
supervisor OS.
To tackle this issue, we improve the fdt_parse_isa_extensions()
implementation to pre-parse ISA string for all HARTs during
cold boot.
Fixes: d72f5f17478d ("lib: utils: Add detection of Smepmp from ISA
string in FDT")
Signed-off-by: Anup Patel <[email protected]>
Tested-By: Mayuresh Chitale<[email protected]>
|
|
Platforms may implement hpm events/counters non contiguously but the current
implementation assumes them to be always contigous. Add a bitmap that
captures the hpm events/counters as implemented in the hardware and use
it to set the max limit of hardware counters visible to the OS. Counters
not implemented in the hardware can't be used by the OS because those
wont be described in the DT.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <[email protected]>
|
|
Let us have common FDT based reset driver for syscon reboot and
poweroff. The device tree bindings for syscon reboot and poweroff
are already available in the Linux kernel sources.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
Let us add a simple FDT based system regmap driver which follows the
device tree bindings already defined in the Linux kernel.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add a simple FDT based regmap framework which is built on top of
generic regmap library. The phandle of FDT regmap DT node is treated
as unique regmap ID. The FDT based regmap drivers will be probed
on-demand from fdt_regmap_get_by_phandle() and fdt_regmap_get()
called by the regmap client drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We add generic regmap access library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or regmap drivers can register regmap instances which
can be discovered by different regmap clients based on the
unique ID of regmap instances.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
The "driver" pointer in struct i2c_adapter is not used anywhere
so let us remove it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
commit 68e66106120f ("SUSP: Add SBI_ERR_DENIED") of the SBI spec adds
a new error code, SBI_ERR_DENIED, which is returned when entry criteria
has not be meant. Update the system suspend implementation to return
this error when it has detected that not all harts are in the STOPPED
state.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
License identifiers should be machine readable.
According to the SPDX v2.3.0 specification annex E parentheses are not
used in the SPDX identifier field when specifying multiple licenses [1].
[1] https://spdx.github.io/spdx-spec/v2.3/using-SPDX-short-identifiers-in-source-files/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
With Smepmp enabled, it is necessary for shared memory from
S/U mode to be mapped/unmapped before and after read/write
of the memory region. This patch maps the debug console
shared memory before accessing it.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When Smepmp is enabled, M-mode will need to map/unmap the
shared memory before it can read/write to it. This patch
adds functions to create dynamic short-lived mappings.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
- If Smepmp is enabled, the access flags of an entry are determined based on
truth table defined in Smepmp.
- First PMP entry (index 0) is reserved.
- Existing boot PMP entries start from index 1.
- Since enabling Smepmp revokes the access privileges of the M-mode software
on S/U-mode region, first PMP entry is used to map/unmap the shared memory
between M and S/U-mode. This allows a temporary access window for the M-mode
software to read/write to S/U-mode memory region.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Configure PMP at last when all other initializations have been done.
Because if SMEPMP is detected, M-mode access to the S/U space will be
rescinded.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since pmp entries have implicit priority on index, previous entries will
deny access to SU on M-mode region. Also, M-mode will not have access to
SU region while previous entries will allow access to M-mode regions.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
- Add function to parse ISA string in FDT.
- Set Smepmp feature bit in extensions if "smepmp" string is found in ISA string.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
- Add Smepmp as extension in sbi_hart_extensions enum
- Return "smepmp" string for Smepmp extension from sbi_hart_extension_id2string
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
- Add a function to disable a given PMP entry.
- Add a function to check if a given entry is disabled.
Signed-off-by: Himanshu Chauhan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, we see following compile error in the designeware GPIO driver
for RV32 systems:
lib/utils/gpio/fdt_gpio_designware.c:115:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
115 | chip->dr = (void *)addr + (bank * 0xc);
| ^
lib/utils/gpio/fdt_gpio_designware.c:116:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
116 | chip->ext = (void *)addr + (bank * 4) + 0x50;
We fix the above error using an explicit type-cast to 'unsigned long'.
Fixes: 7828eebaaa77 ("gpio/desginware: add Synopsys DesignWare APB GPIO support")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
Fix special case: sbi_snprintf(out, out_len, ...) when out_len equal
1, The previous code will not fill the buffer with any char.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
A single scan of the format char may add multiple characters to the
tbuf, causing a buffer overflow. You should check if tbuf is full in
printc so that it does not cause a buffer overflow.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Because *out needs to reserve a byte to hold '\0', no more characters
should be added to the buffer when *out has one byte left, and the
buffer size *out_len should not be modified. this patch prevents
the correction of *out_len when *out_len is 1.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When doing width = width - strlen(string) in prints there is no need
to consider the case that witdh may be less than 0. This is because
the code to do filling needs to be executed under the condition that
width > 0.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix two bug:
> printf("%#08x", 0x123); /* print 0000x123 */
> printf("%#x", 0); /* print 0x0 */
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add o type for print to print octal numbers
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The information of sg/b/letbase can be obtained by the type character,
simplifying the parameter by passing the type directly.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The space flag is used to add a space before positive numbers, and
apostrophe is used to print the thousand separator. Add code to
ignore these two flags
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Adds + flags for print, prefixing positive numbers with + when this
flags is present
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Left alignment and padding '0' should not exist at the same time,
this patch skips padding.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The flags for print should be able to appear in any order. The
previous code required the order to be fixed.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix Priv spec version typo in commit d4b563c881d6 ("lib: sbi: Remove MCOUNTEREN
and SCOUNTEREN hart features").
At least Priv spec v1.11 is required for [m|s]counteren and mcountinhibit CSRs.
Fixes: d4b563c881d6 ("lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features")
Signed-off-by: Ley Foon Tan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The hart_pmu_get_allowed_bits() function detects implemented bits
of mhpm counters so let us rename this function accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
