| Age | Commit message (Collapse) | Author |
|---|
|
We add a generic platform override callback to allow platform specific firmware init.
Signed-off-by: Wei Liang Lim <[email protected]>
Reviewed-by: Chee Hong Ang <[email protected]>
Reviewed-by: Jun Liang Tan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We add a generic platform override callback to allow platform specific
selection of cold boot HART.
Signed-off-by: Anup Patel <[email protected]>
|
|
It makes sense to use fdt_match_node() instead of fdt_find_match()
in fw_platform_lookup_special() as we already have the start offset
to search from.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Init of non-standard extensions is a platform-specific thing,
so allow generic platforms to do this via a platform-override.
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
We add RISC-V semihosting based serial console for JTAG based early
debugging.
The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Kautuk Consul <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The generic platform version and default name should be set based
on kconfig options so that users can override it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
Allow the vendor_ext_check and vendor_ext_provider APIs of the
generic platform to be overridden by other platforms
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Ignore CPU nodes in FDT which are not enabled.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Instead of having platform override module list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Move the fdt_reset_init() invocation from generic_early_init() to
generic_final_init(). This allows to print error messages.
Ignore the return value of fdt_reset_init() as we should not stop booting
due to failure to initialize reset drivers.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Dong Du <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Instruction TLB can fail to respect a non-global SFENCE thus we need to
flush the TLB using SFENCE.VMA x0, x0
See full description of CIP-1200 in Errata_FU740-C000_20210205 from
https://www.sifive.com/boards/hifive-unmatched
Signed-off-by: David Abdurachmanov <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add PMU support for generic platform. Generic platform solely relies on
the device tree to parse all pmu related information. If any event is
not described in device tree, generic platform will not support it.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
fw_platform_init() fills platform.name without considering the
ending null character. Fix it.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
The fdt_domain_get() function is now redundant because the
fdt_domains_populate() function can explicitly register new
domains using the sbi_domain_register() function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The generic platform should populate domains from FDT using the
domain FDT helper routines.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, the generic platform fw_platform_init() marks non-MMU
HARTs (e.g. E-core on SiFive Unleashed) as invalid. This means
such non-MMU HARTs won't be allowed to go ahead by sbi_init().
The sbi_init() now has a check for next stage privilege mode when
selecting coldboot HART. This check will force non-MMU HARTS (i.e.
HARTs without S-mode) to proceed in warmboot path and wait in the
HSM STOPPED state. This means we don't need to mark non-MMU HARTs
as invalid in generic platform fw_platform_init().
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
This is achieved by removing the 'no-map' property from the
'reserved-memory' node when PMP is present, otherwise we keep it as it
offers a small protection if the OS does not map this region at all.
A new callback in platform_override is introduced and allows to fixup the
device-tree. It is used here to override this new default behaviour on
SiFive Fu540 platforms that has an erratum that prevents S-mode software
to access a PMP protected region using 1GB page table mapping.
If PMP is present, telling the OS not to map the reserved regions does not
add much protection since it only avoids access to regions that are already
protected by PMP. But by not allowing the OS to map those regions, it
creates holes in the OS system memory map and prevents the use of
hugepages which would generate, among other benefits, less TLB miss.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the fw_platform_init() does not return anything but we can
further improve by allowing fw_platform_init() to return updated FDT
location.
It is certainly not mandatory for fw_platform_init() to return a new
location of FDT (or modify FDT). In fact, the fw_platform_init() can
always return the original FDT location (i.e. 'arg1') unmodified.
This new capability of fw_platform_init() will allow platforms to:
1. Have multiple built-in FDTs and select one
2. Modify FDT before using based on platform specific straps or OTP
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We need to override the remote TLB flush range limit for SiFive FU540
so we add platform override to achieve this.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add generic FDT based platform support which provides platform
specific functionality based on the FDT passed by previous booting
stage.
By default, the generic FDT platform makes following assumptions:
1. platform FW_TEXT_START is 0x80000000
2. platform features are default
3. platform stack size is default
4. platform has no quirks or work-arounds
The above assumptions (except 1) can be overridden by adding special
platform callbacks which will be called based on the FDT root node
compatible string.
By default, we compile OpenSBI generic platform as follows:
$ make PLATFORM=generic
For a non-standard FW_TEXT_START, we can compile OpenSBI generic
platform as follows:
$ make PLATFORM=generic FW_TEXT_START=<non_standard_text_start>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
