| Age | Commit message (Collapse) | Author |
|---|
|
The Ariane framework has a generic PMU that is not used by OpenSBI.
Due to OpenSBI’s build system we cannot directly reuse the generic
platform functions, so move the Ariane platform to generic. Also due
to the generic platform is where new features are added.
Signed-off-by: Manuel Hernández Méndez <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for performance.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for device power.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add voltage service group for RPMI/MPXY support
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive SMC0 controls the clock and power domain of the core complex
on the SiFive platform. The core complex enters the low power state
after the secondary cores enter the tile power gating and last core
execute the `CEASE` instruction with the corresponding SMC0
configurations. The devices that inside both tile power domain and core
complex power domain will be off, including caches and timer. Therefore
we need to flush the last level cache before entering the core complex
power gating and update the timer after waking up.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive TMC0 controls the tile power domains on SiFive platform. The
CPU enters the low power state via the `CEASE` instruction after
configuring the TMC0. Any devices that inside the tile power domain will
be power gated, including the private cache. Therefore flushing the
private cache before entering the low power state.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Reviewed-by: Cyan Yang <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform may contain multiple IPI devices. In certain use cases,
such as power management, it may be necessary to send an IPI through a
specific device to wake up a CPU. For example, if an IMSIC is powered
down and reset, the core cannot receive IPIs from it, so the wake-up must
instead be triggered through the CLINT.
Suggested-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the helpers to build up the cache hierarchy via FDT and provide some
cmo functions for the user who want to flush the entire cache.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
SiFive Composable cache is a L3 share cache of the core complex. Add this
driver to support the share cache maintenance operations via the MMIO
registers.
Co-developed-by: Samuel Holland <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Nick Hu <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the FDT cache library so we can build up the cache topology via the
'next-level-cache' DT property.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Andy Chiu <[email protected]>
Signed-off-by: Andy Chiu <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some of the platforms use platform specific CSR access functions for
configuring implementation specific CSRs (such as PMA registers).
Extend the common csr_read_num() and csr_write_num() to allow custom
CSRs so that platform specific CSR access functions are not needed.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Enable CONFIG_PLATFORM_SPACEMIT_K1 in the defconfig for SpacemiT K1 SoC.
Co-authored-by: Troy Mitchell <[email protected]>
Signed-off-by: Troy Mitchell <[email protected]>
Signed-off-by: Xianbin Zhu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add code to bring up all 8 cores during OpenSBI initialization so
that the Linux kernel can detect and use all cores properly.
Co-authored-by: Troy Mitchell <[email protected]>
Signed-off-by: Troy Mitchell <[email protected]>
Signed-off-by: Xianbin Zhu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add initial platform support for the SpacemiT K1 SoC, including
early/final init hooks, cold boot handling, and CCI-550 snoop/DVM
enablement.
Co-authored-by: Troy Mitchell <[email protected]>
Signed-off-by: Troy Mitchell <[email protected]>
Signed-off-by: Xianbin Zhu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add support for VisionFive 2 Lite board.
Link: https://github.com/hal-feng/opensbi/commit/b7e46979a4feb293070094835ba4058b5e55d707
Signed-off-by: Hal Feng <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend generic platform to support Andes QiLai SoC.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The fdt_ipi_init() is already called from generic_early_init() so
let's convert IPI drivers as early drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The platform specfic IPI init is not need anymore because using
IPI device rating multiple IPI devices can be registered in any
order as part of the platform specific early init.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
We program reset base for harts (other than hart 0) to boot at
mips_warm_boot that jumps to _start_warm. This helps to skip some code
sequence to speed up.
Signed-off-by: Chao-ying Fu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
OpenSBI is a BSD project. We need to modify some codes to compatible
with BSD-2-Clause license.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Ben Zong-You Xie <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This minimizes the size that will be reserved by the OS for the FDT, and
it prevents the FDT buffer from containing uninitialized memory, which
can be important for some simulation platforms and for attestation.
Closes: https://github.com/riscv-software-src/opensbi/issues/388
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The OpenPiton framework has a generic PMU that is not used by OpenSBI.
Due to OpenSBI’s build system we cannot directly reuse the generic
platform functions, so move the OpenPiton platform to generic. Also due
to the generic platform is where new features are added.
Signed-off-by: Manuel Hernández Méndez <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Allow platforms to implement platform specific PMP setup and
PMP disable functions which are called before actual PMP CSRs
are configured.
Also, implement pmp_set() and pmp_disable() for MIPS P8700.
Signed-off-by: Chao-ying Fu <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend generic platform to support MIPS P8700.
Signed-off-by: Chao-ying Fu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
It seems that current implementation doesn't fail on fdt_mpxy_init(),
because platforms might not have any MPXY devices. In fact, if there are
no MPXY devices, fdt_driver_init_all() will return SBI_OK.
More importantly, if there is any MPXY device which fails the
initialization, OpenSBI must check the error code and stop the booting.
Thus, this commit adds the return value for fdt_mpxy_init().
Signed-off-by: Alvin Chang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Set the scratch allocation alignment to cacheline size specified by
riscv,cbom-block-size in the DTS file to avoid two atomic variables
from the same cache line causing livelock on some platforms. If the
cacheline is not specified, we set it a default value.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Now that the generic platform only sets .vendor_ext_provider if the
function is really implemented, there is no need for a separate hook to
check if a vendor extension is implemented.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In addition to deduplicating the code, this also improves the match
selection logic to respect the priority order of the compatible strings,
as implemented in commit 0ffe265fd969 ("lib: utils/fdt: Respect
compatible string fallback priority").
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Now that all of the overrides are modifying generic_platform_ops
directly, remove the unused hooks and forwarding functions. The
remaining members of struct platform_override match struct fdt_driver,
so use that type instead. This allows a future commit to reuse the
fdt_driver-based init function.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Switch all existing platform overrides to use the helper pattern instead
of the platform hooks. After this commit, only the .match_table and
.init members of struct platform_override are used.
There are two minor behavioral differences:
- For Allwinner D1, fdt_add_cpu_idle_states() is now called before the
body of generic_final_init(). This should have no functional impact.
- For StarFive JH7110, if the /chosen/starfive,boot-hart-id property is
missing, the code now falls back to using generic_coldboot_harts,
instead of accepting any hart.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently the generic platform follows the middleware pattern: it
implements the sbi_platform hooks, while providing its own set of hooks
for further customization. This has a few disadvantages: each location
where customization is needed requires a separate platform_override
hook, including places where the generic function does nothing except
forward to a platform_override hook, and the extra layer of function
pointers adds runtime overhead.
Let's restructure the generic platform to follow the helper pattern.
Allow platform overrides to treat the generic platform as a template,
adding or replacing the sbi_platform_operations as needed. Export the
generic implementations, so they can be called as helpers from inside
the override functions. With this pattern, the platform_override
function pointers are replaced by direct calls, and the forwarding
functions can be removed.
The forwarding functions are not exported, since there is no reason for
an override to call them. generic_vendor_ext_check() must be rewritten,
since now there is a new way to override vendor_ext_provider.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In preparation for reusing the fdt_driver code to match platform
overrides, add a new .init hook matching the type signature from
fdt_driver. This hook replaces the existing .fw_init hook, since
it is called at roughly the same place in the init process.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
struct fdt_match expects match data to be const. Follow this expectation
so that no type casting is needed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This function accesses the FDT blob, which means it is only valid to
call during cold boot, before a lower privilege level has an opportunity
to clobber that memory.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The addresses of these functions are used to set function pointers in
struct platform_override, so it is not valid for them to be inline.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <[email protected]>
|
|
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The Sophgo SG2044 is a new version of C920, although it supports
sscofpmf, it still needs this pmu quirks its cores.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
It is possible that hartid may not be sequential and it should not be validated
against SBI_HARTMASK_MAX_BITS. Instead we should check the index of the hartid,
hart index, against SBI_HARTMASK_MAX_BITS.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
C23 pre-defines bool so we need to gate our defines.
Signed-off-by: Michael Neuling <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Initialize serial drivers first, so messages printed by other drivers do
not need to use the early console buffer.
Suggested-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI based driver for CPPC register read, write and probe.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Co-developed-by: Rahul Pathak <[email protected]>
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Sunil V L <[email protected]>
Signed-off-by: Sunil V L <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
|
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
The generic platform can have multiple HSM drivers so add a simple
FDT based HSM driver framework.
Signed-off-by: Anup Patel <[email protected]>
|
