| Age | Commit message (Collapse) | Author |
|---|
|
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
Implement rebooting the K210 via the system reset extension.
All reset types are treated in the same way.
A request for shutdown results in a reboot.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The Kendryte K210 platform has built-in DTB and does not provides
FW_PAYLOAD_FDT_ADDR. This means the FDT fixups will be done on
the built-in DTB in absence of FW_PAYLOAD_FDT_ADDR. This patch
adds some padding in built-in DTB for FDT fixups.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
When passing the device tree to the next stage we should apply necessary
device tree fix-ups first. These include:
* fix up the CPU node in the device tree
* fix up the PLIC node in the device tree
* fix up the reserved memory node in the device tree
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We update kendryte/k210 to use new mechanism of having builtin DTB
where we convert k210.dts to C source and further compile-n-link it
with libplatsbi.a.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We can achieve shutdown, cold reboot, and warm reboot using just
one sbi_platform callback so we combine system_reboot() and
system_shutdown() callbacks into one system_reset() callback.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Adjust the order of include header files in alphabetical order in
platform codes. Also remove unnecessary inclusions.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
As of today all platforms use 8KB of per-HART stack hence there is
no need for each platform to define its own macro or use the magic
number. Create one macro for all platforms. Platform still can use
its own version if needed.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The disabled_hard_mask in sbi_platform is only 64bits wide so we
cannot disable a HART with HARTID > 63. To tackle this, we remove
disabled_hart_mask and replace it with hart_disabled() platform
callback.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
All platform except kendryte/k210 use 8KB of per-HART stack hence
this patch set per-HART stack size of kendryte/k210 to 8KB for
consistency.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra<[email protected]>
Reviewed-by: Zong Li <[email protected]>
|
|
Commit 9dfe72057957 ("kendryte/k210: remove sysctl code") missed
removing the file sysctl.c. Fix this here.
Fixes: 9dfe72057957 ("kendryte/k210: remove sysctl code")
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Directly implement frequency discovery, making the sysctl code
unnecessary. While at it, Move all macro definitions from platform.c
into platform.h and cleanup that file, removing the need for the
Apache 2.0 license and Canaan Inc copyright.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The Kendryte K210 UARTHS is compatible with SiFive UART. So use the
sifive uart driver and remove the k210 uarths platform code.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
There are several places in the source tree that have:
32bit, 32 bit, 64bit, 64 bit
Fix by using the conventional names with a hyphen.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Lukas Auer <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <[email protected]>
|
|
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <[email protected]>
|
|
Add missing SPDX and copyright information.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
platform should be a read-only variable, if it is placed in the data
segment, it may be exploited.
Signed-off-by: Xiang Wang <[email protected]>
|
|
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <[email protected]>
Suggested-by:Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Suggested-by: Olof Johansson <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <[email protected]>
|
|
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <[email protected]>
|
|
It is not necessary that platform has MMIO-based timer value
register. It can also have some custom (implementation specific)
CSR for timer value.
This patch renames SBI_PLATFORM_HAS_MMIO_TIMER_VALUE to
SBI_PLATFORM_HAS_TIMER_VALUE to imply "platform timer value"
instead of "mmio timer value".
Signed-off-by: Anup Patel <[email protected]>
|
|
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The source_hart and hartid parameter is really not required in
IPI callbacks of sbi_platform because current hartid can always
be obtained by calling sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The Kendryte k210 board initial loader does not provide a device tree
for the firmware and subsequent payload. Add the k210.dts device tree
description file to solve this. This file describes only the SoC core
components: CPUs, memory and PLIC.
Automatically compile and add this file to the firmware generated
using the FW_PAYLOAD_FDT_PATH configuration parameter.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Clear console input when intializing it.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <[email protected]>
|
|
There are couple of string function defined in platform
code. We no longer need them as we can directly link minimal
libc.
Every platform required to inclde this as PLIC driver required
libc functions.
Signed-off-by: Atish Patra <[email protected]>
|
