| Age | Commit message (Collapse) | Author |
|---|
|
The Kendryte K210 UARTHS is compatible with SiFive UART. So use the
sifive uart driver and remove the k210 uarths platform code.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
There are several places in the source tree that have:
32bit, 32 bit, 64bit, 64 bit
Fix by using the conventional names with a hyphen.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Lukas Auer <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <[email protected]>
|
|
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <[email protected]>
|
|
Add missing SPDX and copyright information.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
platform should be a read-only variable, if it is placed in the data
segment, it may be exploited.
Signed-off-by: Xiang Wang <[email protected]>
|
|
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <[email protected]>
Suggested-by:Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Suggested-by: Olof Johansson <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <[email protected]>
|
|
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <[email protected]>
|
|
It is not necessary that platform has MMIO-based timer value
register. It can also have some custom (implementation specific)
CSR for timer value.
This patch renames SBI_PLATFORM_HAS_MMIO_TIMER_VALUE to
SBI_PLATFORM_HAS_TIMER_VALUE to imply "platform timer value"
instead of "mmio timer value".
Signed-off-by: Anup Patel <[email protected]>
|
|
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The source_hart and hartid parameter is really not required in
IPI callbacks of sbi_platform because current hartid can always
be obtained by calling sbi_current_hartid() API.
Signed-off-by: Anup Patel <[email protected]>
|
|
The Kendryte k210 board initial loader does not provide a device tree
for the firmware and subsequent payload. Add the k210.dts device tree
description file to solve this. This file describes only the SoC core
components: CPUs, memory and PLIC.
Automatically compile and add this file to the firmware generated
using the FW_PAYLOAD_FDT_PATH configuration parameter.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Clear console input when intializing it.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <[email protected]>
|
|
There are couple of string function defined in platform
code. We no longer need them as we can directly link minimal
libc.
Every platform required to inclde this as PLIC driver required
libc functions.
Signed-off-by: Atish Patra <[email protected]>
|
|
Simplify sysctl.c code to only the used CPU freqency function.
This reduces the size of the final firmware by 4KB.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
k210_console_putc() and k210_console_init() are local functions. Declare
them as static.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The Kendryte K210 platform support was contributed by Damien
hence fix author name.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having separate timer_init() hooks for cold and
warm boot, this patch updates struct sbi_platform to have just
one timer_init() hook. The type of boot (cold or warm) is now
a boolean flag parameter for the updated timer_init() hook.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having separate ipi_init() hooks for cold and warm boot,
this patch updates struct sbi_platform to have just one ipi_init()
hook. The type of boot (cold or warm) is now a boolean flag parameter
for the updated ipi_init() hook.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having separate irqchip_init() hooks for cold and
warm boot, this patch updates struct sbi_platform to have just
one irqchip_init() hook. The type of boot (cold or warm) is now
a boolean flag parameter for the updated irqchip_init() hook.
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of having separate early_init() and final_init() hooks
for cold and warm boot, this patch updates struct sbi_platform
to have just one early_init() and one final_init() hook. The
type of boot (cold or warm) is now a boolean flag parameter for
the updated early_init() and final_init() hooks.
Signed-off-by: Anup Patel <[email protected]>
|
|
The PLAT_HART_COUNT and PLAT_HART_STACK_SIZE are only used
by platform code so no need of exposing these to everyone
by adding it to platform-cppflags-y.
Signed-off-by: Anup Patel <[email protected]>
|
|
The PLAT_NAME is used only in platform.c for all platforms hence
remove it.
Signed-off-by: Anup Patel <[email protected]>
|
|
As of now, uboot doesn't have support for SMP.
Moreover, unleashed board has a E51 hart which
doesn't not support S mode.
We should only boot only 1 non-zero hart.
Signed-off-by: Atish Patra <[email protected]>
|
|
Pass S-Mode and M-mode context id separately to common warm init.
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
|
|
The math.h is not required anymore and it also gives
compile error for certain toolchains hence thsi patch
removes math.h include from kendryte/k210/sysctl.c.
Signed-off-by: Anup Patel <[email protected]>
|
|
Use functions defined in sbi/riscv_asm.h.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Booting now.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
This patch renames "plat" to "platform" everywhere for better
readablility.
Signed-off-by: Anup Patel <[email protected]>
|
