| Age | Commit message (Collapse) | Author |
|---|
|
As of today all platforms use 8KB of per-HART stack hence there is
no need for each platform to define its own macro or use the magic
number. Create one macro for all platforms. Platform still can use
its own version if needed.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The template platform codes should set per-HART stack size to 8KB
to avoid possible mistakes of future platform ports.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The disabled_hard_mask in sbi_platform is only 64bits wide so we
cannot disable a HART with HARTID > 63. To tackle this, we remove
disabled_hart_mask and replace it with hart_disabled() platform
callback.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
If a platform requires to perform a tlb full flush, they should set
the tlb_range_flush_limit value to zero. However, corresponding platform
API ignore the value and continue to return the default value.
Add a platform ops to retrieve platform specific tlb range flush limit.
The platform variable becomes redundant in presence of the platform ops.
Take this opportunity to remove the variable as well.
The default is still set to smallest page size in RISC-V (4KB), as there
is no way to figure out a best value for all platforms. Individual platform
should set it to the optimal value for their platform.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch does minor typo fix in system reboot/shutdown names
in platform operations.
Signed-off-by: Jiuyang Liu (Sequencer) <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra<[email protected]>
Reviewed-by: Zong Li <[email protected]>
|
|
Currently, the tlb range flush threshold is fixed and set to 4k for
all platforms. However, it should be platform specific as it completely
depends upon how platform actually implements sfence instruction.
Define a platform feature that allows every individual platform to set
different values. If a platform doesn't define it, just use a page size as
the threshold.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <[email protected]>
Acked-by: Anup Patel <[email protected]>
|
|
This patch enables FW_DYNAMIC option (i.e. dynamic firmware) for
all appropriate/applicable platforms.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <[email protected]>
|
|
platform should be a read-only variable, if it is placed in the data
segment, it may be exploited.
Signed-off-by: Xiang Wang <[email protected]>
|
|
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <[email protected]>
Suggested-by:Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
|
|
|
|
There was a space instead of '_' in the function `platform_final_init`.
|
|
Makes for easy and quick build-run one-stop command.
For now only added for qemu targets. It can be added for
any platform having simulator/emulator (such as QEMU).
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
This patch introduces following optional PLATFORM options:
PLATFORM_RISCV_XLEN -> RISC-V register width
PLATFORM_RISCV_ABI -> RISC-V GCC ABI
PLATFORM_RISCV_ISA -> RISC-V GCC ISA string
PLATFORM_RISCV_CODE_MODEL -> RISC-V GCC Code Model
If the above options are not provided by platform config.mk
or by command-line parameters then:
1. PLATFORM_RISCV_XLEN will be determined using toolchain
capability
2. PLATFORM_RISCV_ABI, PLATFORM_RISCV_ISA, and
PLATFORM_RISCV_CODE_MODEL is set to value best suited for
generic libsbi.a
As a result of these optional PLATFORM options, the
platform-cflags-y and platform-asflags-y is further
simplified for platform config.mk.
Signed-off-by: Anup Patel <[email protected]>
|
|
Both FW_JUMP_ADDR and FW_PAYLOAD_OFFSET, should be:
1. 4MB aligned for 32bit system
2. 2MB aligned for 64bit system
Explicitly specify the above details in config.mk comments
for template platform.
Signed-off-by: Anup Patel <[email protected]>
|
|
In order to support 32-bit guests move the start address to a 4MB
allignment. As 64-bit kernels have a requirement on being 2MB alligned
let's just make this the default for both 32 and 64 bit kernels.
Signed-off-by: Alistair Francis <[email protected]>
|
|
The QEMU virt machine can be either 32 or 66 bit. Don't hard code the
CPU bit length and instead let the compiler determine it.
Signed-off-by: Alistair Francis <[email protected]>
|
|
Create commented template files to use as a base for new platforms
support implementation.
Signed-off-by: Damien Le Moal <[email protected]>
|
