rt-thread.git/.github/ALL_BSP_COMPILE.json, branch master

[bsp][spacemit/k1] first version #11132

2026-10-19T10:49:16Z

[bsp][hpmicro] upgrade hpm_sdk to v1.13.0 and add hpm5100evk support

2026-10-17T08:28:33Z

Sync the HPMicro BSPs with hpm_sdk v1.13.0 and add the HPM5100EVK (HPM5151) board. - add the hpm5100evk BSP (board/startup/applications/Kconfig/docs) and register it in .github/ALL_BSP_COMPILE.json, bsp/README.md and the HPMicro READMEs - re-sync the 11 existing boards (board/startup/debug scripts/linker scripts/applications) with hpm_sdk v1.13.0, keeping the RT-Thread specific parts: clock_time based drv_timer, CXX wired into the scons environment, SConscript outputs under build/, named Kconfig choices, rt_hw_us_delay in board_delay_*, board local codec files - sync the shared driver layer with hpm_sdk v1.13.0 (GPTMRv2/PTMR, PUART, soft I2C/SPI and the remaining peripheral driver updates) - select the hpm_sdk v1.13.0 online package (PKG_USING_HPM_SDK_V113) - use -Og instead of -O0 for the debug builds and print floats with the RT-Thread klibc implementation instead of newlib nano - initialize the RT-Thread heap before the SDK console init: the SDK console_init() calls setvbuf(), which allocates through the C library malloc() and tripped RT_ASSERT() in rt_smem_alloc() on the boards built with RT_USING_DEBUG - keep only ram_rtt.ld/flash_rtt.ld per board, align the DLM origin to 4KB on hpm5300evk/hpm5301evklite (the unaligned origin made the linker emit a file backed PT_LOAD for the RAM area, which broke "program rtthread.elf"), and anchor the generated .bin at the flash base address 0x80000000 - sync the hpm6750evk openocd debug scripts with the new style used by the other boards (hpm_common.cfg/hpm_reset.cfg with arp_halt) - keep the upstream synced board/startup/libraries trees of bsp/hpmicro out of the changed-file cppcheck run (same policy as bsp/hpmicro/.clang-format-ignore): the check runs without the hpm_sdk include paths, so it reports ATTR_PLACE_AT and the linker script symbol arithmetic in c_startup() as errors - give the hpmicro boards in the changed-file scons trigger list the RV32 toolchain they need (RISC-V-GCC-RV32) and add the matching installation step to that workflow: the entries used sourcery-arm, which only provides the ARM toolchain, so those legs could not find riscv32-unknown-elf-gcc - keep hpm5100evk's ram_rtt.ld identical to the hpm_sdk v1.13.0 reference: the .fast_ram sections belong in DLM there (the DLM has enough headroom), and that also makes its RAM and flash layouts agree - skip the dependency pre-check when cleaning (scons -c): it runs from DoBuilding() unconditionally, so a clean request with packages/ not fetched yet was aborted with exit code 1 instead of cleaning - make the manual scons trigger workflow runnable: it aborted while still downloading actions because actions/upload-artifact@v3 is deprecated, and scons was not on PATH because ~/.env/env.sh was never sourced. Install tools/requirements.txt and source the Env PATH script in the build step, and use @main action versions, as bsp_buildings.yml does - start the LED demo thread only when rt_thread_create() succeeded Tested: - 12 boards x {ram_debug, ram_release, flash_debug, flash_release}: 48/48 clean builds - flash boot + msh on hpm5100evk, hpm5300evk, hpm5e00evk, hpm6200evk, hpm6300evk, hpm6750evk, hpm6750evk2, hpm6750evkmini, hpm6800evk, hpm6e00evk, hpm6p00evk (list device/timer, ps, free, reset, rt_kprintf float formatting) - re-ran .github/workflows/manual_trigger_scons_except_STM32_all.yml with the matrix reduced to the three hpmicro rows: all three legs build and scons --dist succeeds with no local workarounds

[bsp][esp32-c6] add ESP32-C6-DevKitC-1 support (#11836)

2026-09-28T14:22:30Z

* [bsp][esp32-c6] add ESP32-C6-DevKitC-1 support Add bsp/ESP/ESP32_C6. Default image is GPIO, UART0 and ADC. The C6 IDF sources are not in RT-Thread-packages/esp-idf yet. * [bsp][esp32-c6] fix CI format, C6 package and CH32V203 D6 build clang-format the files the format check rejected. Fetch the C6 scons branch when the downloaded ESP-IDF package has no C6 target. Patch the CH32V20x SDK under libraries so a D6 build no longer calls Exit(). * [bsp][esp32-c6] fetch mbedtls and stop pkgs from pulling the C6 branch * [bsp][esp32-c6] rebuild CI against the package branch tip * [bsp][esp32-c6] rebuild CI against the strict-mode package tip * [bsp][esp32-c6] fix the reviewed ADC, math and package pin bugs Keep the IDF tree on the reviewed commit, and stop the ADC and critical-section paths from reporting success when they did not. * [bsp][esp32-c6] reserve stuck interrupt lines and lock ADC CPU lines 3 and 4 never latch an enable, so copying the handler left the non-IRAM mask on the old line. Reserve those lines and let the allocator write the mask and the route together. The C6 oneshot registers are shared, so one mutex covers enable and convert. * [bsp][esp32-c6] list the peripherals this board actually runs GPIO, UART0 and ADC1 have been read on the DevKitC-1. Radios and the untested buses stay marked unsupported. * [bsp][esp32-c6] keep SPI unsupported after the loopback mismatch GPIO7 shorted to GPIO2 returned 0xA5000000 for a sent 0xA5, so the table does not mark SPI supported. --------- Co-authored-by: seteiro <276597748+cms19859230182-lang@users.noreply.github.com>

[bsp][ch32v203] add CH32V203C8T6-EVT-R0 support #11827

2026-09-24T08:21:11Z

[bsp][stm32] Add stm32n657-st-nucleo BSP (#11799)

2026-09-16T01:05:27Z

* [bsp][stm32] Add stm32n657-st-nucleo BSP * style: format STM32 HAL drivers and STM32N657 BSP with clang-format

[bsp][xuantie]Feat: Add xiaohui C908 supports rt-smart and mmu.

2026-09-15T14:57:55Z

[bsp][nxp] Add FRDM-MCXC162 BSP support

2026-09-08T08:15:20Z

feat[bsp][xuantie]: c908 support rt-smart #11719

2026-08-28T04:25:32Z

RA6W1基础BSP内容

2026-08-05T06:52:20Z

[ci]add titan dual-core projects

2026-07-27T05:15:58Z