rt-thread.git/bsp/beaglebone, branch v5.0.2

[project] update mdk/iar project and config.

2023-10-08T03:21:00Z

[bsp] fix mismatched function types in rt_pin_ops for all drv_gpio.c (#7457)

2023-05-09T03:35:27Z

sync and update all projects (#7138)

2023-03-31T08:49:48Z

* sync and update

modify RT_ALIGN_SIZE as 8 by default

2023-01-13T03:47:23Z

format link scripts

2023-01-09T03:52:13Z

format Kconfig and sconscript

2023-01-09T03:52:13Z

sync branch rt-smart. (#6641)

2022-12-03T04:07:44Z

* Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 Co-authored-by: zhkag

[bsp][applications][sconscript] 整理统一sconscript格式 (#6481)

2022-10-03T14:43:08Z

* [bsp][sconscript] 整理统一sconscript格式 * update * update

bsp beaglebone: add IAR support (#6443)

2022-09-22T06:13:34Z

* bsp beaglebone: add IAR template files and fix it's build error ATTENTION: project.* was generated by scons, so I add it to gitignore. rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong. （我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性，我也不知道怎么用命令行调用这些参数来编译） * bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds, the difference will easy cause later developer got below error: => go 0x80200000 ## Starting application at 0x80200000 ... undefined instruction pc : [<8200956c>] lr : [<8ff62497>] reloc pc : [<728a956c>] lr : [<80802497>] sp : 8df37358 ip : 00000000 fp : 00000002 r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8 r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf) Resetting CPU ... resetting ... * libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support IAR new project defualt Processor mode is Thumb, this will cause user easy occur the following error: ... msh />Execption: r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000 r08:0x00000000 r09:0x00000000 r10:0x0000000a fp :0x0000000a ip :0x65687374 sp :0x00006c6c lr :0x0000008a pc :0x88008be0 cpsr:0x880001bc software interrupt shutdown... (0) assertion failed at function:rt_hw_cpu_shutdown, line number:160 * bsp beaglebone: change IAR template.ewp code use Arm mode Arm mode bin size will bigger than Thumb mode * libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable Reviewer mysterywolf say: 麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的这是个命名统一的函数

完善bsp beaglebone的基本使用 (#6434)

2022-09-16T03:56:31Z

* bsp beaglebone: rerun menuconfg * bsp beaglebone: add uart0 support * bsp beaglebone: use uart0 as console * bsp beaglebone: add heap init fix rt_application_init() error: (m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288 * bsp beaglebone: add mmu & interrupt init must init mmu, otherwise no interrupt is generated, cause scheduler can't work. I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c * libcpu am335x: reset interrupt controller before init vector I think reset before init is more better AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c IntAINTCInit() * bsp beaglebone: full gpio driver support * bsp beaglebone: add tftpboot way to uboot_cmd.txt * bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one Co-authored-by: YangZhongQing