rt-thread.git/bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c, branch master

[bsp][gd32] Fix USART TX and RX GPIO initialization

2026-09-21T01:38:05Z

Configure TX as alternate-function push-pull and RX as pull-up input on GD32E50x/F10x/F20x/F30x. Remove the GPIO API alias that incorrectly configured both pins as general-purpose push-pull outputs.

[gd32/arm][bsp]: synchronous kconfig update

2025-11-26T13:42:29Z

[gd32/arm][drivers]: general GD serial driver adapter

2025-11-26T13:42:29Z

[fix] 修正UART驱动管脚配置不正确的问题

2025-09-28T01:32:36Z

[bsp/gd32] add gd32h759i-eval bsp add fix drv_usart.c (#10623)

2025-08-25T02:57:59Z

* [bsp/gd32] add gd32h759i-eval bsp * [fix] Update gd32h759i-start config * 添加BSP CI看护 * Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * add .gitignore --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

[Fix] :gd32_uart_gpio_init 过早开中断触发断言rx_fifo == NULL

2025-08-06T06:16:27Z

Solution: gd32_uart_gpio_init 不开中断等驱动框架初始化好fifo后通过 device_control 开中断 Signed-off-by: Yucai Liu <1486344514@qq.com>

[BSP] 添加GD32E230开发板适配 (#10557)

2025-07-31T09:27:18Z

[bsp][gd32] 添加GD32F527I BSP (#10454)

2025-07-08T01:21:57Z

Co-authored-by: guozhanxin

[BSP][GD32]add gd32e503v-eval

2024-11-02T22:38:27Z

uart: add support for gd32h7xx

2024-07-29T05:18:28Z