rt-thread.git/bsp/hpmicro/libraries, branch master

[bsp][hpmicro] upgrade hpm_sdk to v1.13.0 and add hpm5100evk support

2026-10-17T08:28:33Z

Sync the HPMicro BSPs with hpm_sdk v1.13.0 and add the HPM5100EVK (HPM5151) board. - add the hpm5100evk BSP (board/startup/applications/Kconfig/docs) and register it in .github/ALL_BSP_COMPILE.json, bsp/README.md and the HPMicro READMEs - re-sync the 11 existing boards (board/startup/debug scripts/linker scripts/applications) with hpm_sdk v1.13.0, keeping the RT-Thread specific parts: clock_time based drv_timer, CXX wired into the scons environment, SConscript outputs under build/, named Kconfig choices, rt_hw_us_delay in board_delay_*, board local codec files - sync the shared driver layer with hpm_sdk v1.13.0 (GPTMRv2/PTMR, PUART, soft I2C/SPI and the remaining peripheral driver updates) - select the hpm_sdk v1.13.0 online package (PKG_USING_HPM_SDK_V113) - use -Og instead of -O0 for the debug builds and print floats with the RT-Thread klibc implementation instead of newlib nano - initialize the RT-Thread heap before the SDK console init: the SDK console_init() calls setvbuf(), which allocates through the C library malloc() and tripped RT_ASSERT() in rt_smem_alloc() on the boards built with RT_USING_DEBUG - keep only ram_rtt.ld/flash_rtt.ld per board, align the DLM origin to 4KB on hpm5300evk/hpm5301evklite (the unaligned origin made the linker emit a file backed PT_LOAD for the RAM area, which broke "program rtthread.elf"), and anchor the generated .bin at the flash base address 0x80000000 - sync the hpm6750evk openocd debug scripts with the new style used by the other boards (hpm_common.cfg/hpm_reset.cfg with arp_halt) - keep the upstream synced board/startup/libraries trees of bsp/hpmicro out of the changed-file cppcheck run (same policy as bsp/hpmicro/.clang-format-ignore): the check runs without the hpm_sdk include paths, so it reports ATTR_PLACE_AT and the linker script symbol arithmetic in c_startup() as errors - give the hpmicro boards in the changed-file scons trigger list the RV32 toolchain they need (RISC-V-GCC-RV32) and add the matching installation step to that workflow: the entries used sourcery-arm, which only provides the ARM toolchain, so those legs could not find riscv32-unknown-elf-gcc - keep hpm5100evk's ram_rtt.ld identical to the hpm_sdk v1.13.0 reference: the .fast_ram sections belong in DLM there (the DLM has enough headroom), and that also makes its RAM and flash layouts agree - skip the dependency pre-check when cleaning (scons -c): it runs from DoBuilding() unconditionally, so a clean request with packages/ not fetched yet was aborted with exit code 1 instead of cleaning - make the manual scons trigger workflow runnable: it aborted while still downloading actions because actions/upload-artifact@v3 is deprecated, and scons was not on PATH because ~/.env/env.sh was never sourced. Install tools/requirements.txt and source the Env PATH script in the build step, and use @main action versions, as bsp_buildings.yml does - start the LED demo thread only when rt_thread_create() succeeded Tested: - 12 boards x {ram_debug, ram_release, flash_debug, flash_release}: 48/48 clean builds - flash boot + msh on hpm5100evk, hpm5300evk, hpm5e00evk, hpm6200evk, hpm6300evk, hpm6750evk, hpm6750evk2, hpm6750evkmini, hpm6800evk, hpm6e00evk, hpm6p00evk (list device/timer, ps, free, reset, rt_kprintf float formatting) - re-ran .github/workflows/manual_trigger_scons_except_STM32_all.yml with the matrix reduced to the three hpmicro rows: all three legs build and scons --dist succeeds with no local workarounds

bsp: hpmicro: clear full ENET buffers

2026-07-08T06:03:58Z

rt_hw_eth_init() clears ENET descriptor tables using element size times count, but the RX/TX data buffers used sizeof(size), which only covers the width of the size field. Use the configured buffer count and size so the whole RX/TX buffer areas are initialized before handing them to the ENET descriptor configuration. Make the Cppcheck intent explicit for the HPM placement macros and the LPI_CSR register read so the touched file passes static analysis. Signed-off-by: Old-Ding <35417409+Old-Ding@users.noreply.github.com>

[components][clock_time] Refactor time subsystem around clock_time (#11111)

2026-01-31T09:44:27Z

* [components][clock_time] Refactor time subsystem around clock_time Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals. Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional. Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer. * [components][clock_time] Use BSP-provided clock timer frequency on riscv64 * [risc-v] Use runtime clock timer frequency for tick and delays * [bsp] Add clock timer frequency hooks for riscv64 boards * [bsp] Update Renesas RA driver doc clock_timer link * [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh * [bsp][rk3500] Update rk3500 clock configuration * [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays * [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci * [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings. * [bsp][raspi3] select clock time for systimer * [bsp][hpm5300evk] Trim trailing blank line * [bsp][hpm5301evklite] Trim trailing blank line * [bsp][hpm5e00evk] Trim trailing blank line * [bsp][hpm6200evk] Trim trailing blank line * [bsp][hpm6300evk] Trim trailing blank line * [bsp][hpm6750evk] Trim trailing blank line * [bsp][hpm6750evk2] Trim trailing blank line * [bsp][hpm6750evkmini] Trim trailing blank line * [bsp][hpm6800evk] Trim trailing blank line * [bsp][hpm6e00evk] Trim trailing blank line * [bsp][nxp] switch lpc178x to gcc and remove mcx timer source * [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue. * [docs][clock_time] add clock time documentation * [docs][clock_time] Update clock time subsystem documentation - Update device driver index to use correct page reference - Clarify upper layer responsibilities in architecture overview - Update README to describe POSIX/libc, Soft RTC, and device driver usage - Refine architecture diagram with improved layout and color scheme - Remove obsolete clock_timer.md file * [kernel][utest] Trim trailing space * [clock_time] Fix hrtimer wrap handling * [clock_time] fix the static rt_inline issue * [clock_time] fix the rt_clock_hrtimer_control result issue

[sdio][dm] update for DM (#11078)

2025-12-26T13:04:42Z

* [sdio][dm] import Kconfig for DM Signed-off-by: GuEe-GUI <2991707448@qq.com> * [sdio] fixup IRQ and mmcsd threads' stack size default Signed-off-by: GuEe-GUI <2991707448@qq.com> * [sdio][dm] Support DM mode 1. Support features read by DM. 2. Support regulator API in drivers. 3. Support send tuning option CMD. 4. Replace `switch_uhs_voltage` by `signal_voltage_switch`. Signed-off-by: GuEe-GUI <2991707448@qq.com> * [dm][sdhci] Cleanup the SDHCI Signed-off-by: GuEe-GUI <2991707448@qq.com> * [sdio][dm] add new SDIO/SDHCI drivers 1. SDHCI support on PCI bus 2. Synopsys DesignWare MMC Family(MMIO/PCI) Signed-off-by: GuEe-GUI <2991707448@qq.com> --------- Signed-off-by: GuEe-GUI <2991707448@qq.com>

[bsp][hpm]:fix scons --dist

2025-11-30T04:57:38Z

[bsp][hpmicro] upgrade to bsp v1.10.0, add hpm6p00evk and hpm5e00evk support

2025-09-23T05:38:22Z

- upgraded bsp to v1.10.0 - moved hpm_sdk to rt-thread package - added support for hpm6p00evk and hpm5e00evk Signed-off-by: Fan YANG

[drivers][serial_v2]允许阻塞接收超过rx缓冲区大小的数据、增加超时时间、flush、获取缓冲区数据长度命令、数据溢出逻辑修复、稳定性细节优化、添加更多serial_v2测试用例

2025-05-16T01:42:11Z

[components][serial_v2] 优化txflush逻辑、对tx的activated做中断保护 [components][at] at_client适配新版serial_v2 [components][at] at_server适配新版serial_v2 [components][serial_v2] 测试用例增加循环调用，format测试用例 [components][serial_v2] poll模式判断逻辑错误 [components][serial_v2] 测试用例去掉一些非必要延时 [components][serial_v2] 测试例程使用menuconfig进行配置，更新readme [components][at_client] at_client_getchar返回值错误、at_client解析线程优先级错误设置 [components][at] 错误码应该返回负值 [components][serial_v2] TCFLSH和FIONREAD完善、control函数增加错误返回值 [components][serial_v2] RT_SERIAL_CTRL_GET_RX_DATA_LEN更改为RT_SERIAL_CTRL_GET_UNREAD_BYTES_COUNT [utest][serial_v2] TC_UART_SEND_TIMES替换为RT_SERIAL_TC_SEND_ITERATIONS [components][serial_v2] FIONREAD参数应该是无符号类型 [utest][serial_v2] 完善测试用例 [components][serial_v2] 避免使用三目运算符 [components][serial_v2] 使用clang-format格式化代码 [components][serial_v2] 添加get超时时间命令 [components][serial_v2] 完善posix接口 [components][serial_v2] 阻塞接口添加阻塞时间为0时的处理逻辑、优化RX阻塞接收逻辑 [components][serial_v2] 设置超时时间命令的参数改为指针形式 [components][serial_v2] nbuf发送添加超时时间为0时的逻辑 [components][serial_v2] 完善添加测试用例 [utest][serial_v2] 修复依赖关系 [components][serial_v2] 非阻塞模式下tx_flush错误修复 [components][serial_v2] activated使用原子API [components][serial_v2] 优化DMA逻辑、没使能DMA时屏蔽DMA逻辑节约资源 [components][serial_v2] 提供写满时丢弃新数据和覆盖旧数据策略，写满丢弃策略效率更高 [components][serial_v2] 部分平台适配写满时两种策略功能 [components][serial_v2] DMA模式暂不支持丢弃新数据策略 [utest][serial_v2] 优化测试代码 [components][serial_v2] DMA模式下使用乒乓缓冲、DMA模式支持丢弃新数据策略 [utest][serial_v2] 适配DMA乒乓缓冲 [bsp][serial_v2] 部分bsp适配DMA下乒乓缓冲 [components][serial_v2] 使用spinlock替换中断，对部分结构体变量使用原子操作 [utest][serial_v2] 更新测试用例 [components][at] 适配new serialv2不再判断RTT版本号 [components][at] 删除多余的中文注释 [utest][serial_v2] 添加交叉echo示例，qemu环境下专用 [bsp][qemu] 适配串口v2并开启fifo [components][at] 修复合并导致的错误 [bsp][n32] 适配serial_v2，没有经过测试 [components][serial_v2] 格式化代码 [utest][serial_v2] 删除无意义的打印

[bsp][hpmicro] fix the alignement check logic and the cache-maintenance logic

2025-01-08T06:55:04Z

- corrected the alignement check logic - optimized the cache maintenance logic Signed-off-by: Fan YANG

[bsp][hpmicro] add missing fence apis

2024-08-26T02:41:15Z

- added missing fence apis Signed-off-by: Fan YANG

[bsp][hpmicro] upgrade hpm_sdk to v1.6.0

2024-08-26T02:41:15Z

- upgraded hpm_sdk to v1.6.0 Signed-off-by: Fan YANG