rt-thread.git/bsp/k230/board/Kconfig, branch copilot/remove-vbus-code-implementation

bsp: k230: add rtc driver

2025-09-22T14:30:20Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an RTC driver. Solution: Provide RTC drivers for the k230 platform in the RT-Thread repository, implementing timekeeping and alarm functionalities, with interrupt support for the alarm feature. Signed-off-by: Ze-Hou

bsp:k230:add pdma support for uart driver

2025-08-29T02:37:36Z

Added pdma support for uart driver and a test file test_uart.c. The test uses pdma to improve uart send speed, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp:k230:add support for temperature sensor driver

2025-08-20T01:29:09Z

Added a temperature sensor driver and a test file test_ts.c. The test uses temperature sensor to measure the chip temperature, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp: k230: add pdma driver support

2025-08-18T06:11:44Z

This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC, providing essential DMA capabilities for peripheral data transfers. Key features implemented: 1. PDMA channel request/release management 2. Channel start/stop control 3. Interrupt callback registration 4. Data transfer between device ports and DDR memory The driver includes: - Core driver implementation (drv_pdma.c/h) - Build system support (SConscript) - Basic test cases (test_pdma.c) Tested with: - PDMA channel request/release - DDR to UART TX FIFO transfers - UART RX FIFO to DDR transfers Signed-off-by: eatvector <2302147681@qq.com>

bsp: k230: add support for PWM driver

2025-07-29T07:48:08Z

Added a PWM driver and a test file test_pwm.c. The test uses PWM to control the LED brightness, to check if the driver works correctly. Signed-off-by: XU HU <1337858472@qq.com>

bsp: k230: support adc

2025-06-10T11:23:09Z

Signed-off-by: Chen Wang

bsp: k230: add hwtimer support

2025-05-31T11:50:07Z

K230 support 6 general hardware timers and 3 stc timers. This patch only implement drivers for general hw timers. Signed-off-by: Chen Wang

bsp: k230: add watchdog support

2025-05-28T05:49:49Z

K230 has two watchdog timers. Add unit tests based on utest framework. Watchdog and test are both configuable, disabled by default. Signed-off-by: Chen Wang

bsp: k230: fix kconfig warnings

2025-05-26T09:45:13Z

scons --menuconfig will report: ``` warning: the choice symbol PKG_USING_ZLIB_LATEST_VERSION (defined at /home/u/.env/packages/packages/misc/zlib/Kconfig:31) is selected by the following symbols, but select/imply has no effect on choice symbols - BSP_ROOTFS_TYPE_CROMFS (defined at Kconfig:36) warning: default on the choice symbol BSP_USING_SDIO0 (defined at board/Kconfig:20) will have no effect, as defaults do not affect choice symbols warning: default on the choice symbol BSP_USING_SDIO1 (defined at board/Kconfig:34) will have no effect, as defaults do not affect choice symbols ``` Fix and remove these warnings. Signed-off-by: Chen Wang

bsp: k230: support sdio

2025-05-21T01:42:50Z

Support sdio work for 01Studio board. 01Studio connect TF socket with sdio0, which is different from standard canmv v1.0/v1.1 board (which uses sdio1). Updated configuration menu, - SDIO devices are now a choice of two. - Root file system types are also a choice of multiple. Currently only cromfs and elmFAT are supported. - Modified the default mount partition of the root file system to sd0p1 Deleted the configuration BSP_SD_SDIO_DEV, and now directly set mmcsd_change according to the selection of the SDIO device. Eliminated the warning of the drv_sdhci.c and egularized the code format. The logic of this file has not been essentially modified. Sync and update the .config/rtconfig.h to the latest. Signed-off-by: Chen Wang