rt-thread.git/bsp/k230/board, branch copilot/create-device-driver-model-docsUnnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/rt-thread.git/atom/bsp/k230/board?h=copilot%2Fcreate-device-driver-model-docs2025-12-26T13:02:37Z[bsp][k230]:add gnne driver2025-12-26T13:02:37ZChuanfjchuanil@gmail.com2025-12-09T10:17:09Zurn:sha1:239f371fcb6f4aaa4189cd6b5691c24853f76ea8
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have a gnne driver.
Solution: Provide gnne driver for the k230 platform in the RT-Thread repository.
- Implements mutex lock mechanism for AI2D and GNNE modules.
- Adds HARDLOCK_AI2D support in hardlock driver for mutual exclusion.
- Implements poll operation for device status monitoring.
- Updates documentation in bsp/README.md.
Signed-off-by: ChuanN-sudo <fjchuanil@gmail.com>
bsp: k230: add dma support to the i2c driver2025-11-25T14:12:24ZZe-Houyingkezhou@qq.com2025-11-24T13:17:56Zurn:sha1:d3e26999ceee1d8f42a4d6407b4dcfb4771cb03b
1. add dma support to the I2C driver to improve efficiency.
Signed-off-by: Ze-Hou <yingkezhou@qq.com>
bsp: k230: add spi driver2025-11-16T03:37:32ZChuanfjchuanil@gmail.com2025-11-10T15:12:29Zurn:sha1:ae2a5758bc0b18e82680b7beae74877d65ac6f88
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver.
Solution: Provide spi driver for the k230 platform in the RT-Thread repository.
- Supports SPI0(OSPI) controller with 1/2/4/8 data lines.
- Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines.
- Implements DMA-based transfers for OSPI, QSPI, and DSPI modes.
- Falls back to standard IRQ-driven transfers for legacy SPI mode (single line).
- Updates documentation in bsp/README.md
Signed-off-by: ChuanN-sudo <fjchuanil@gmail.com>
bsp: k230: add i2c driver2025-10-29T05:33:11ZZe-Houyingkezhou@qq.com2025-10-28T07:14:48Zurn:sha1:9e3127982dda80741cf0918b9a74299c311d10dd
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an I2C driver.
Solution: Provide I2C driver for the k230 platform in the RT-Thread
repository.
1. support i2c master mode
Signed-off-by: Ze-Hou <yingkezhou@qq.com>
bsp: k230: add rtc driver2025-09-22T14:30:20ZZe-Houyingkezhou@qq.com2025-09-18T08:10:46Zurn:sha1:bfbb3c93e777a36c886b3d11186543b310060f6f
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an RTC driver.
Solution: Provide RTC drivers for the k230 platform in the RT-Thread
repository, implementing timekeeping and alarm functionalities,
with interrupt support for the alarm feature.
Signed-off-by: Ze-Hou <yingkezhou@qq.com>
bsp:k230:add pdma support for uart driver2025-08-29T02:37:36Zdannyray019dannyray0364@gmail.com2025-08-28T10:06:15Zurn:sha1:500deb8aef9369ba001dbfa2752c563d4501f4f8
Added pdma support for uart driver and a test file test_uart.c.
The test uses pdma to improve uart send speed,
to check if the driver works correctly.
Signed-off-by: XU HU 1337858472@qq.com
bsp:k230:add support for temperature sensor driver2025-08-20T01:29:09Zdannyray019dannyray0364@gmail.com2025-08-19T08:43:59Zurn:sha1:60b3ccb8ad979bdb9e4d7d611e7c5f7e4af8457b
Added a temperature sensor driver and a test file test_ts.c.
The test uses temperature sensor to measure the chip temperature,
to check if the driver works correctly.
Signed-off-by: XU HU 1337858472@qq.com
bsp: k230: Provide a unified interrupt header file2025-08-18T14:53:08ZChen Wangunicorn_wang@outlook.com2025-08-18T02:24:11Zurn:sha1:352b1f6a13fe796bef43d620b92ff25e3d480f8b
Originally, the interrupt definitions of various peripherals
were distributed in various peripheral drivers, resulting
in duplicate definitions. Now they are defined in one place.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
bsp: k230: add pdma driver support2025-08-18T06:11:44Zeatvector2302147681@qq.com2025-08-07T15:29:39Zurn:sha1:7db99433e59937aac77ac6f85d7f743595aa4ed1
This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC,
providing essential DMA capabilities for peripheral data transfers.
Key features implemented:
1. PDMA channel request/release management
2. Channel start/stop control
3. Interrupt callback registration
4. Data transfer between device ports and DDR memory
The driver includes:
- Core driver implementation (drv_pdma.c/h)
- Build system support (SConscript)
- Basic test cases (test_pdma.c)
Tested with:
- PDMA channel request/release
- DDR to UART TX FIFO transfers
- UART RX FIFO to DDR transfers
Signed-off-by: eatvector <2302147681@qq.com>
bsp: k230: add support for PWM driver2025-07-29T07:48:08Zdannyray019dannyray0364@gmail.com2025-07-29T05:26:42Zurn:sha1:c209173061e7cda3af75935b9a206835f63a7963
Added a PWM driver and a test file test_pwm.c.
The test uses PWM to control the LED brightness,
to check if the driver works correctly.
Signed-off-by: XU HU <1337858472@qq.com>