rt-thread.git/bsp/k230/board, branch master

[bsp]: select RT_USING_SERIAL for UART configurations

2026-08-13T01:40:54Z

[components][clock_time] Refactor time subsystem around clock_time (#11111)

2026-01-31T09:44:27Z

* [components][clock_time] Refactor time subsystem around clock_time Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals. Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional. Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer. * [components][clock_time] Use BSP-provided clock timer frequency on riscv64 * [risc-v] Use runtime clock timer frequency for tick and delays * [bsp] Add clock timer frequency hooks for riscv64 boards * [bsp] Update Renesas RA driver doc clock_timer link * [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh * [bsp][rk3500] Update rk3500 clock configuration * [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays * [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci * [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings. * [bsp][raspi3] select clock time for systimer * [bsp][hpm5300evk] Trim trailing blank line * [bsp][hpm5301evklite] Trim trailing blank line * [bsp][hpm5e00evk] Trim trailing blank line * [bsp][hpm6200evk] Trim trailing blank line * [bsp][hpm6300evk] Trim trailing blank line * [bsp][hpm6750evk] Trim trailing blank line * [bsp][hpm6750evk2] Trim trailing blank line * [bsp][hpm6750evkmini] Trim trailing blank line * [bsp][hpm6800evk] Trim trailing blank line * [bsp][hpm6e00evk] Trim trailing blank line * [bsp][nxp] switch lpc178x to gcc and remove mcx timer source * [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue. * [docs][clock_time] add clock time documentation * [docs][clock_time] Update clock time subsystem documentation - Update device driver index to use correct page reference - Clarify upper layer responsibilities in architecture overview - Update README to describe POSIX/libc, Soft RTC, and device driver usage - Refine architecture diagram with improved layout and color scheme - Remove obsolete clock_timer.md file * [kernel][utest] Trim trailing space * [clock_time] Fix hrtimer wrap handling * [clock_time] fix the static rt_inline issue * [clock_time] fix the rt_clock_hrtimer_control result issue

[bsp][k230]:add gnne driver

2025-12-26T13:02:37Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have a gnne driver. Solution: Provide gnne driver for the k230 platform in the RT-Thread repository. - Implements mutex lock mechanism for AI2D and GNNE modules. - Adds HARDLOCK_AI2D support in hardlock driver for mutual exclusion. - Implements poll operation for device status monitoring. - Updates documentation in bsp/README.md. Signed-off-by: ChuanN-sudo

bsp: k230: add dma support to the i2c driver

2025-11-25T14:12:24Z

1. add dma support to the I2C driver to improve efficiency. Signed-off-by: Ze-Hou

bsp: k230: add spi driver

2025-11-16T03:37:32Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver. Solution: Provide spi driver for the k230 platform in the RT-Thread repository. - Supports SPI0(OSPI) controller with 1/2/4/8 data lines. - Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines. - Implements DMA-based transfers for OSPI, QSPI, and DSPI modes. - Falls back to standard IRQ-driven transfers for legacy SPI mode (single line). - Updates documentation in bsp/README.md Signed-off-by: ChuanN-sudo

bsp: k230: add i2c driver

2025-10-29T05:33:11Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an I2C driver. Solution: Provide I2C driver for the k230 platform in the RT-Thread repository. 1. support i2c master mode Signed-off-by: Ze-Hou

bsp: k230: add rtc driver

2025-09-22T14:30:20Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an RTC driver. Solution: Provide RTC drivers for the k230 platform in the RT-Thread repository, implementing timekeeping and alarm functionalities, with interrupt support for the alarm feature. Signed-off-by: Ze-Hou

bsp:k230:add pdma support for uart driver

2025-08-29T02:37:36Z

Added pdma support for uart driver and a test file test_uart.c. The test uses pdma to improve uart send speed, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp:k230:add support for temperature sensor driver

2025-08-20T01:29:09Z

Added a temperature sensor driver and a test file test_ts.c. The test uses temperature sensor to measure the chip temperature, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp: k230: Provide a unified interrupt header file

2025-08-18T14:53:08Z

Originally, the interrupt definitions of various peripherals were distributed in various peripheral drivers, resulting in duplicate definitions. Now they are defined in one place. Signed-off-by: Chen Wang