rt-thread.git/bsp/k230/drivers, branch copilot/create-dfs2-documentation

utest: remove RT_UTEST_USING_ALL_CASES

2025-09-26T01:57:54Z

Many modules' utests currently don't support enabling all tests at once. Furthermore, some modules' tests are complex, for example due to their numerous dependencies on other modules. This makes it nearly impossible to enable all tests with a single global switch. Consequently, the previously defined `RT_UTEST_USING_ALL_CASES` has lost its original meaning. We recommend deprecating this configuration switch. If a module needs to enable a group of functional tests through its own configuration, this local enable all switch should be implemented by the module itself, and a global RTT enable switch will no longer be provided. If such a requirement arises in the future, we recommend careful design, especially considering how to ensure that turning on a single switch enables all dependencies for all involved modules for ease of use. Signed-off-by: Chen Wang

bsp: k230: add rtc driver

2025-09-22T14:30:20Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an RTC driver. Solution: Provide RTC drivers for the k230 platform in the RT-Thread repository, implementing timekeeping and alarm functionalities, with interrupt support for the alarm feature. Signed-off-by: Ze-Hou

utest: update naems using new rule

2025-09-15T11:40:31Z

The names of the utest cases defined in their respective modules have been updated. Some utest case names are not yet in their respective modules because their paths need to be finalized before their unique names can be determined. Currently, these names do not appear to conflict with the unified names. These include: - utest cases still in examples - bsp/qemu-virt64-riscv/applications/test/test_vector/test_vector.c. The entire test case should probably be placed in libcpu/risc-v rather than bsp. Signed-off-by: Chen Wang

bsp:k230:add pdma support for uart driver

2025-08-29T02:37:36Z

Added pdma support for uart driver and a test file test_uart.c. The test uses pdma to improve uart send speed, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp:k230:add support for temperature sensor driver

2025-08-20T01:29:09Z

Added a temperature sensor driver and a test file test_ts.c. The test uses temperature sensor to measure the chip temperature, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp: k230: Provide a unified interrupt header file

2025-08-18T14:53:08Z

Originally, the interrupt definitions of various peripherals were distributed in various peripheral drivers, resulting in duplicate definitions. Now they are defined in one place. Signed-off-by: Chen Wang

bsp: k230: add pdma driver support

2025-08-18T06:11:44Z

This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC, providing essential DMA capabilities for peripheral data transfers. Key features implemented: 1. PDMA channel request/release management 2. Channel start/stop control 3. Interrupt callback registration 4. Data transfer between device ports and DDR memory The driver includes: - Core driver implementation (drv_pdma.c/h) - Build system support (SConscript) - Basic test cases (test_pdma.c) Tested with: - PDMA channel request/release - DDR to UART TX FIFO transfers - UART RX FIFO to DDR transfers Signed-off-by: eatvector <2302147681@qq.com>

bsp: k230: add support for PWM driver

2025-07-29T07:48:08Z

Added a PWM driver and a test file test_pwm.c. The test uses PWM to control the LED brightness, to check if the driver works correctly. Signed-off-by: XU HU <1337858472@qq.com>

bsp: k230: support adc

2025-06-10T11:23:09Z

Signed-off-by: Chen Wang

bsp: k230: add gpio driver

2025-06-10T06:22:21Z

K230 supports 3 GPIO groups: group0: GPIO0 ~ GPIO31, support i/o and irq group1: GPIO32 ~ GPIO63, support i/o and irq group2: GPIO64 ~ GPIO71, only support i/o. Signed-off-by: Chen Wang