rt-thread.git/bsp/k230/rtconfig.h, branch copilot/create-device-driver-model-docs

bsp: k230: add dma support to the i2c driver

2025-11-25T14:12:24Z

1. add dma support to the I2C driver to improve efficiency. Signed-off-by: Ze-Hou

bsp: k230: add spi driver

2025-11-16T03:37:32Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver. Solution: Provide spi driver for the k230 platform in the RT-Thread repository. - Supports SPI0(OSPI) controller with 1/2/4/8 data lines. - Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines. - Implements DMA-based transfers for OSPI, QSPI, and DSPI modes. - Falls back to standard IRQ-driven transfers for legacy SPI mode (single line). - Updates documentation in bsp/README.md Signed-off-by: ChuanN-sudo

bsp: k230: add i2c driver

2025-10-29T05:33:11Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an I2C driver. Solution: Provide I2C driver for the k230 platform in the RT-Thread repository. 1. support i2c master mode Signed-off-by: Ze-Hou

bsp: k230: add rtc driver

2025-09-22T14:30:20Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an RTC driver. Solution: Provide RTC drivers for the k230 platform in the RT-Thread repository, implementing timekeeping and alarm functionalities, with interrupt support for the alarm feature. Signed-off-by: Ze-Hou

bsp:k230:add pdma support for uart driver

2025-08-29T02:37:36Z

Added pdma support for uart driver and a test file test_uart.c. The test uses pdma to improve uart send speed, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp:k230:add support for temperature sensor driver

2025-08-20T01:29:09Z

Added a temperature sensor driver and a test file test_ts.c. The test uses temperature sensor to measure the chip temperature, to check if the driver works correctly. Signed-off-by: XU HU 1337858472@qq.com

bsp: k230: increase object name max length to 16

2025-08-18T07:03:59Z

Fixes: 62f3fb4ce550: fix(kernel)/improve(utest):fix the legacy issue related to the length of the object name version #10537 After this patch, if length of object name exceeds (RT_NAME_MAX - 1), RTT will assert and oops when runing, but not in period of building. Though I don't think it's a good solution, but don't want to argue more about this. Old RT_NAME_MAX is 8 for k230, and some object names, such as "hwtimer0", which name length is 8, breaking the new rule. Just update configuration of k230 bsp and increase RT_NAME_MAX from 8 to 16, which should be long enough for k230. Signed-off-by: Chen Wang

bsp: k230: add pdma driver support

2025-08-18T06:11:44Z

This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC, providing essential DMA capabilities for peripheral data transfers. Key features implemented: 1. PDMA channel request/release management 2. Channel start/stop control 3. Interrupt callback registration 4. Data transfer between device ports and DDR memory The driver includes: - Core driver implementation (drv_pdma.c/h) - Build system support (SConscript) - Basic test cases (test_pdma.c) Tested with: - PDMA channel request/release - DDR to UART TX FIFO transfers - UART RX FIFO to DDR transfers Signed-off-by: eatvector <2302147681@qq.com>

bsp: k230: add support for PWM driver

2025-07-29T07:48:08Z

Added a PWM driver and a test file test_pwm.c. The test uses PWM to control the LED brightness, to check if the driver works correctly. Signed-off-by: XU HU <1337858472@qq.com>

bsp: k230: support sdio

2025-05-21T01:42:50Z

Support sdio work for 01Studio board. 01Studio connect TF socket with sdio0, which is different from standard canmv v1.0/v1.1 board (which uses sdio1). Updated configuration menu, - SDIO devices are now a choice of two. - Root file system types are also a choice of multiple. Currently only cromfs and elmFAT are supported. - Modified the default mount partition of the root file system to sd0p1 Deleted the configuration BSP_SD_SDIO_DEV, and now directly set mmcsd_change according to the selection of the SDIO device. Eliminated the warning of the drv_sdhci.c and egularized the code format. The logic of this file has not been essentially modified. Sync and update the .config/rtconfig.h to the latest. Signed-off-by: Chen Wang