rt-thread.git/bsp/k230, branch copilot/create-ai-agent-rules

[format][version]: synchronize bsp version configuration

2026-05-08T03:22:12Z

[components][clock_time] Refactor time subsystem around clock_time (#11111)

2026-01-31T09:44:27Z

* [components][clock_time] Refactor time subsystem around clock_time Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals. Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional. Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer. * [components][clock_time] Use BSP-provided clock timer frequency on riscv64 * [risc-v] Use runtime clock timer frequency for tick and delays * [bsp] Add clock timer frequency hooks for riscv64 boards * [bsp] Update Renesas RA driver doc clock_timer link * [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh * [bsp][rk3500] Update rk3500 clock configuration * [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays * [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci * [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings. * [bsp][raspi3] select clock time for systimer * [bsp][hpm5300evk] Trim trailing blank line * [bsp][hpm5301evklite] Trim trailing blank line * [bsp][hpm5e00evk] Trim trailing blank line * [bsp][hpm6200evk] Trim trailing blank line * [bsp][hpm6300evk] Trim trailing blank line * [bsp][hpm6750evk] Trim trailing blank line * [bsp][hpm6750evk2] Trim trailing blank line * [bsp][hpm6750evkmini] Trim trailing blank line * [bsp][hpm6800evk] Trim trailing blank line * [bsp][hpm6e00evk] Trim trailing blank line * [bsp][nxp] switch lpc178x to gcc and remove mcx timer source * [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue. * [docs][clock_time] add clock time documentation * [docs][clock_time] Update clock time subsystem documentation - Update device driver index to use correct page reference - Clarify upper layer responsibilities in architecture overview - Update README to describe POSIX/libc, Soft RTC, and device driver usage - Refine architecture diagram with improved layout and color scheme - Remove obsolete clock_timer.md file * [kernel][utest] Trim trailing space * [clock_time] Fix hrtimer wrap handling * [clock_time] fix the static rt_inline issue * [clock_time] fix the rt_clock_hrtimer_control result issue

[bsp][k230]:add gnne driver

2025-12-26T13:02:37Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have a gnne driver. Solution: Provide gnne driver for the k230 platform in the RT-Thread repository. - Implements mutex lock mechanism for AI2D and GNNE modules. - Adds HARDLOCK_AI2D support in hardlock driver for mutual exclusion. - Implements poll operation for device status monitoring. - Updates documentation in bsp/README.md. Signed-off-by: ChuanN-sudo

bsp: k230: add dma support to the i2c driver

2025-11-25T14:12:24Z

1. add dma support to the I2C driver to improve efficiency. Signed-off-by: Ze-Hou

bsp: k230: add spi driver

2025-11-16T03:37:32Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver. Solution: Provide spi driver for the k230 platform in the RT-Thread repository. - Supports SPI0(OSPI) controller with 1/2/4/8 data lines. - Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines. - Implements DMA-based transfers for OSPI, QSPI, and DSPI modes. - Falls back to standard IRQ-driven transfers for legacy SPI mode (single line). - Updates documentation in bsp/README.md Signed-off-by: ChuanN-sudo

feature: k230: Add other existing drivers to the ci.attachconfig.yml file (#10869)

2025-10-29T22:20:37Z

Resolve issue #10857 Signed-off-by: Ze-Hou

bsp: k230: add i2c driver

2025-10-29T05:33:11Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an I2C driver. Solution: Provide I2C driver for the k230 platform in the RT-Thread repository. 1. support i2c master mode Signed-off-by: Ze-Hou

utest: remove RT_UTEST_USING_ALL_CASES

2025-09-26T01:57:54Z

Many modules' utests currently don't support enabling all tests at once. Furthermore, some modules' tests are complex, for example due to their numerous dependencies on other modules. This makes it nearly impossible to enable all tests with a single global switch. Consequently, the previously defined `RT_UTEST_USING_ALL_CASES` has lost its original meaning. We recommend deprecating this configuration switch. If a module needs to enable a group of functional tests through its own configuration, this local enable all switch should be implemented by the module itself, and a global RTT enable switch will no longer be provided. If such a requirement arises in the future, we recommend careful design, especially considering how to ensure that turning on a single switch enables all dependencies for all involved modules for ease of use. Signed-off-by: Chen Wang

bsp: k230: add rtc driver

2025-09-22T14:30:20Z

Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an RTC driver. Solution: Provide RTC drivers for the k230 platform in the RT-Thread repository, implementing timekeeping and alarm functionalities, with interrupt support for the alarm feature. Signed-off-by: Ze-Hou

utest: update naems using new rule

2025-09-15T11:40:31Z

The names of the utest cases defined in their respective modules have been updated. Some utest case names are not yet in their respective modules because their paths need to be finalized before their unique names can be determined. Currently, these names do not appear to conflict with the unified names. These include: - utest cases still in examples - bsp/qemu-virt64-riscv/applications/test/test_vector/test_vector.c. The entire test case should probably be placed in libcpu/risc-v rather than bsp. Signed-off-by: Chen Wang