rt-thread.git/bsp/nxp/mcx/mcxn/Libraries/drivers, branch copilot/remove-vbus-code-implementation

fix formmating issue

2024-08-27T04:44:34Z

frdm-mcxn236

2024-08-27T04:44:34Z

add uart5 add can support add wdog support

add wdog driver and refine default project

2024-08-27T04:44:34Z

bsp: nxp/mcx/mcxn: SPI: Use updated DMA mux enum.

2024-08-19T08:04:28Z

Signed-off-by: Yilin Sun

bsp: nxp/mcx: Use standard SPI CS pin. (#9312)

2024-08-16T08:47:16Z

* bsp: nxp/mcx/mcxn: SPI: Added missing bracket and re-format code. The closing bracket is missing from SPI6 struct. Introduced since commit fc1cfd6d3627ba8460d514e7913bd307e8b1d567 . Use standard rt_spi_device->cs_pin instead of user_data pointer. --------- Signed-off-by: Yilin Sun

[bsp][mcxn236] Add software i2c driver.

2024-06-25T17:20:59Z

[bsp][nxp] 增加drv_spi_sample_rw007驱动

2024-04-12T10:35:31Z

[bsp][nxp] Add SPI1 config for FRDM-MCXN947 board

2024-04-06T17:18:06Z

[nxp/mcxn] add SPI6 support (#8704)

2024-04-05T00:08:39Z

* [bsp][nxp] add missing drv_spi.h Otherwise when building spi users such as u8g2, gcc will complain can't find the drv_spi.h. * [bsp][nxp] enable spi6 * [bsp][nxp] add spi sample code which uses spi6 to loopback Connect spi6's MISO <--> MSIO, I.E P3_20 and P3_22 with Dupont Line The sample usage and output would be: msh >spi_sample spi rbuf : 0 1 2 3 4 5 6 7 8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f spi loopback mode test over!

[bsp][nxp] mcxn947基础上去除多余修改：

2024-04-03T21:57:46Z