rt-thread.git/bsp/wch/risc-v/Libraries, branch v5.1.0

[driver][soft-spi] spi device driver framework adds pin init function function

2024-04-17T02:46:36Z

为什么提交这份PR (why to submit this PR) ps：在设备初始化阶段不应该存在对硬件的操作你的解决方案是什么 (what is your solution) ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证

[bsp][ch32v307v]添加了硬件iic驱动

2024-04-17T02:39:25Z

[bsp][drv_gpio] fix the error code return when pin number is illegal

2024-04-17T02:29:45Z

[pin] pin_read/write rt_uint8_t to rt_ssize_t

2024-04-17T02:29:45Z

[bsp][renesas] RTduino configuration update

2024-01-18T03:57:51Z

sync update some optimize [bsp][driver] Updates the naming convention of the i2c configuration item

ch32_drivers: call rt_hw_pin_init explicitly

2023-12-16T11:23:10Z

Signed-off-by: xiaofan

fix:fix wch startup risks.

2023-11-16T06:02:17Z

1: If IAP has set mstatus to other value, using csrs will not change old value of mstatus in IAP. It should using csrw instead. 2: Reduce the flash size of undefined irq functions.

[bsp][wch] fix UART IRQ declarion

2023-07-25T23:18:56Z

将UART4后的中断函数声明改为UART

[bsp][stm32][airm2m]更新pin num命令 (#7390)

2023-07-19T22:45:43Z

[include][dbg]update: delete rtdebug.h (#7759)

2023-07-01T12:41:02Z