rt-thread.git/bsp/x1000/drivers, branch v4.0.2

Merge pull request #2878 from Ingenic-community/X1000_board

2019-07-20T06:41:31Z

X1000: board_io.c: 根据配置进行复位/Reset according to configuration.

X1000: board_io.c: 添加版权信息/Add copyright information.

2019-07-20T05:42:56Z

添加版权信息。 Add copyright information. Signed-off-by: Zhou Yanjie

X1000: board_io.c: 根据配置进行复位/Reset according to configuration.

2019-07-20T05:39:51Z

根据配置选择是否对LCD或触摸屏进行复位,在未使用LCD或触摸屏时可缩短系统初始化时间。 Select whether to reset the LCD or touchpad according to the configuration, and shorten the system initialization time when the LCD or touchpad is not used. Signed-off-by: Zhou Yanjie

X1000: drv_mmc.c: 更新版权信息/Update copyright information.

2019-07-19T13:38:38Z

更新版权信息。 Update copyright information. Signed-off-by: Zhou Yanjie

X1000: drv_mmc.c: 修复DMA中的问题/Fix bug in DMA.

2019-07-19T13:38:18Z

修复MMC DMA破坏中断向量内存位置的问题，因为这里没有其他链接描述符。在程序较小时该问题不容易出现，因为此时中断向量保留在缓存中。 Fix for MMC DMA corrupting interrupt vectors' memory location since there is no other link descriptor. This is not noticeable if the program is small, because the interrupt vectors stay in cache. Signed-off-by: Zhou Yanjie

Update all of debug log definition to DBG_TAG and DBG_LVL.

2019-04-12T02:18:57Z

Update drv_gpio.h

2019-03-24T08:51:26Z

X1000:drv_uart.c:修复引脚路由中的问题/Fix bugs in pin routing

2019-03-23T14:10:48Z

在配置引脚路由时需要将未使用的引脚配置为输入模式，否则有可能同u-boot中的配置产生冲突。 Unused pins need to be configured as input mode when configuring pin routing, otherwise there may be conflicts with the configuration in u-boot. Signed-off-by: Zhou Yanjie

X1000:drv_gpio.h:添加枚举成员“GPIO_PULL”/Add enum member "GPIO_PULL"

2019-03-23T14:04:12Z

在枚举“gpio_function”中添加成员“GPIO_PULL” Add the member "GPIO_PULL" to the enumeration "gpio_function". Signed-off-by: Zhou Yanjie

Remove the DBG_COLOR and DBG_ENABLE definition.

2019-03-06T09:54:30Z