rt-thread.git/components/drivers/misc, branch v5.0.x

[errno code][-RT_ERROR] fix that use RT_ERROR without -

2023-03-20T04:06:16Z

[pin][5.0.0] 修正pin框架数据类型使用不当 (#6934)

2023-02-27T02:17:51Z

rt_device_write/read return data type as rt_ssize_t

2023-02-08T02:43:57Z

rt_ssize_t can give negative error code, which follows the unix style correctly

format Kconfig and sconscript

2023-01-09T03:52:13Z

sync branch rt-smart. (#6641)

2022-12-03T04:07:44Z

* Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 Co-authored-by: zhkag

[bsp][c28x] 新增adc驱动 (#6520)

2022-10-15T04:56:00Z

1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d 2. 新增adc驱动与kconfig配置

[TMS320F28379] implement PWM driver (#6457)

2022-09-26T02:41:00Z

增加c28x芯片的pwm驱动已经在TMS320F28379中通过测试 pwm设备框架增加如下方法： #define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8) #define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9) #define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10) #define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)

[rt_drv_pwm]完善PWM框架互补输出部分代码 (#6338)

2022-09-01T04:59:44Z

* [pwm]Improve the code * 将与bsp无关的代码移植到框架部分 * 添加注释

修复了pwm互补输出的一些bug，并在finsh中添加使用说明 (#6191)

2022-07-26T02:07:07Z

* Fix the bug of complementary output

Solve the problem that LOG_W() may not be recognized when the INPUT CAPTURE module is enabled,which may cause the compilation failure.

2022-07-22T06:25:43Z