[bsp][cvitek]: add c906_little i2c driver (#8535)

5 files changed, 785 insertions, 0 deletions

diff --git a/bsp/cvitek/c906_little/board/Kconfig b/bsp/cvitek/c906_little/board/Kconfig
index 2abe335cf5..da65c8e884 100755
--- a/bsp/cvitek/c906_little/board/Kconfig
+++ b/bsp/cvitek/c906_little/board/Kconfig
@@ -19,4 +19,24 @@ menu "General Drivers Configuration"
             default 30
         endif
 
+    menuconfig BSP_USING_I2C
+        bool "Using HW I2C"
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        default n
+
+        if BSP_USING_I2C
+            config BSP_USING_I2C0
+                bool "Enable I2C0"
+                default n
+
+            config BSP_USING_I2C1
+                bool "Enable I2C1"
+                default n
+
+            config I2C_IRQ_BASE
+            int
+            default 32
+        endif
 endmenu
diff --git a/bsp/cvitek/c906_little/board/tick.c b/bsp/cvitek/c906_little/board/tick.c
index e2b9fb40a6..a371256136 100755..100644
--- a/bsp/cvitek/c906_little/board/tick.c
+++ b/bsp/cvitek/c906_little/board/tick.c
@@ -61,3 +61,21 @@ int rt_hw_tick_init(void)
 
     return 0;
 }
+
+/**
+ * This function will delay for some us.
+ *
+ * @param us the delay time of us
+ */
+void rt_hw_us_delay(rt_uint32_t us)
+{
+    unsigned long start_time;
+    unsigned long end_time;
+    unsigned long run_time;
+
+    start_time = get_ticks();
+    end_time = start_time + us * (TIMER_CLK_FREQ / 1000000);
+    do{
+        run_time = get_ticks();
+    } while(run_time < end_time);
+}
diff --git a/bsp/cvitek/drivers/SConscript b/bsp/cvitek/drivers/SConscript
index 1993774cba..27c24ff764 100755
--- a/bsp/cvitek/drivers/SConscript
+++ b/bsp/cvitek/drivers/SConscript
@@ -12,6 +12,9 @@ if GetDepend('BSP_USING_CV1800B') or GetDepend('BSP_USING_C906_LITTLE'):
 if GetDepend('BSP_USING_CV1800B'):
     src += ['drv_gpio.c']
 
+if GetDepend('BSP_USING_I2C'):
+    src += ['drv_hw_i2c.c']
+
 CPPDEFINES += ['-DCONFIG_64BIT']
 
 group = DefineGroup('drivers', src, depend = [''], CPPDEFINES = CPPDEFINES, CPPPATH = CPPPATH)
diff --git a/bsp/cvitek/drivers/drv_hw_i2c.c b/bsp/cvitek/drivers/drv_hw_i2c.c
new file mode 100644
index 0000000000..1cbb47dc2a
--- /dev/null
+++ b/bsp/cvitek/drivers/drv_hw_i2c.c
@@ -0,0 +1,511 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ *2024-02-14      ShichengChu  first version
+ */
+#include "drv_hw_i2c.h"
+#include <rtdevice.h>
+#include <board.h>
+
+#ifdef RT_USING_I2C
+
+#define DBG_TAG              "drv.i2c"
+#define DBG_LVL               DBG_INFO
+#include <rtdbg.h>
+
+#define false 0
+#define true  1
+struct _i2c_bus
+{
+    struct rt_i2c_bus_device parent;
+    uint8_t i2c_id;
+    char *device_name;
+};
+
+static struct _i2c_bus _i2c_obj[] =
+{
+#ifdef BSP_USING_I2C0
+    {
+        .i2c_id = I2C0,
+        .device_name = "i2c0",
+    },
+#endif /* BSP_USING_I2C0 */
+#ifdef BSP_USING_I2C1
+    {
+        .i2c_id = I2C1,
+        .device_name = "i2c1",
+    },
+#endif /* BSP_USING_I2C1 */
+};
+
+static struct i2c_regs *get_i2c_base(uint8_t i2c_id)
+{
+    struct i2c_regs *i2c_base = NULL;
+
+    switch (i2c_id) {
+    case I2C0:
+        i2c_base = (struct i2c_regs *)I2C0_BASE;
+        break;
+    case I2C1:
+        i2c_base = (struct i2c_regs *)I2C1_BASE;
+        break;
+    case I2C2:
+        i2c_base = (struct i2c_regs *)I2C2_BASE;
+        break;
+    case I2C3:
+        i2c_base = (struct i2c_regs *)I2C3_BASE;
+        break;
+    case I2C4:
+        i2c_base = (struct i2c_regs *)I2C4_BASE;
+        break;
+    }
+
+    return i2c_base;
+}
+
+static uint32_t get_i2c_intr(uint8_t i2c_id)
+{
+    uint32_t i2c_intr = 0;
+
+    switch (i2c_id) {
+    case I2C0:
+        i2c_intr = I2C0_IRQ;
+        break;
+    case I2C1:
+        i2c_intr = I2C1_IRQ;
+        break;
+    case I2C2:
+        i2c_intr = I2C2_IRQ;
+        break;
+    case I2C3:
+        i2c_intr = I2C3_IRQ;
+        break;
+    case I2C4:
+        i2c_intr = I2C4_IRQ;
+        break;
+    }
+
+    return i2c_intr;
+}
+
+void i2c_write_cmd_data(struct i2c_regs *i2c, uint16_t value)
+{
+    mmio_write_32((uintptr_t)&i2c->ic_cmd_data, value);
+}
+
+static void i2c_enable(struct i2c_regs *i2c, uint8_t enable)
+{
+    uint32_t ena = enable ? IC_ENABLE : 0;
+    int timeout = 100;
+
+    do {
+        mmio_write_32((uintptr_t)&i2c->ic_enable, ena);
+        if ((mmio_read_32((uintptr_t)&i2c->ic_enable_status) & IC_ENABLE) == ena)
+            return;
+
+        /*
+         * Wait 10 times the signaling period of the highest I2C
+         * transfer supported by the driver (for 400KHz this is
+         * 25us) as described in the DesignWare I2C databook.
+         */
+        rt_hw_us_delay(25);
+    } while (timeout--);
+
+    LOG_I("timeout in %sabling I2C adapter\n", enable ? "en" : "dis");
+}
+
+static void i2c_disable(struct i2c_regs *i2c)
+{
+    int timeout = 100;
+
+    do {
+        mmio_write_32((uintptr_t)&i2c->ic_enable, 0x0);
+        if ((mmio_read_32((uintptr_t)&i2c->ic_enable_status) & IC_ENABLE) == 0x0)
+            return;
+
+        /*
+         * Wait 10 times the signaling period of the highest I2C
+         * transfer supported by the driver (for 400KHz this is
+         * 25us) as described in the DesignWare I2C databook.
+         */
+        rt_hw_us_delay(25);
+    } while (timeout--);
+
+    LOG_I("timeout in disabling I2C adapter\n");
+}
+
+/*
+ * i2c_flush_rxfifo - Flushes the i2c RX FIFO
+ *
+ * Flushes the i2c RX FIFO
+ */
+static void i2c_flush_rxfifo(struct i2c_regs *i2c)
+{
+    while (mmio_read_32((uintptr_t)&i2c->ic_status) & IC_STATUS_RFNE)
+        mmio_read_32((uintptr_t)&i2c->ic_cmd_data);
+}
+
+/*
+ * i2c_wait_for_bb - Waits for bus busy
+ *
+ * Waits for bus busy
+ */
+static int i2c_wait_for_bb(struct i2c_regs *i2c)
+{
+    uint16_t    timeout = 0;
+
+    while ((mmio_read_32((uintptr_t)&i2c->ic_status) & IC_STATUS_MA) ||
+           !(mmio_read_32((uintptr_t)&i2c->ic_status) & IC_STATUS_TFE)) {
+
+        /* Evaluate timeout */
+        rt_hw_us_delay(5);
+        timeout++;
+        if (timeout > 200) /* exceed 1 ms */
+            return 1;
+    }
+
+    return 0;
+}
+
+/*
+ * i2c_setaddress - Sets the target slave address
+ * @i2c_addr:    target i2c address
+ *
+ * Sets the target slave address.
+ */
+static void i2c_setaddress(struct i2c_regs *i2c, uint16_t i2c_addr)
+{
+    /* Disable i2c */
+    i2c_enable(i2c, false);
+    mmio_write_32((uintptr_t)&i2c->ic_tar, i2c_addr);
+    /* Enable i2c */
+    i2c_enable(i2c, true);
+}
+
+
+static int i2c_xfer_init(struct i2c_regs *i2c, uint16_t chip, uint16_t addr, uint16_t alen)
+{
+    if (i2c_wait_for_bb(i2c))
+        return 1;
+
+    i2c_setaddress(i2c, chip);
+
+    while (alen) {
+        alen--;
+        /* high byte address going out first */
+        i2c_write_cmd_data(i2c, (addr >> (alen * 8)) & 0xff); // TODO
+        //mmio_write_32((uintptr_t)&i2c_base->ic_cmd_data, (addr >> (alen * 8)) & 0xff);
+    }
+    return 0;
+}
+
+static int i2c_xfer_finish(struct i2c_regs *i2c)
+{
+    uint16_t timeout = 0;
+    while (1) {
+        if ((mmio_read_32((uintptr_t)&i2c->ic_raw_intr_stat) & IC_STOP_DET)) {
+            mmio_read_32((uintptr_t)&i2c->ic_clr_stop_det);
+            break;
+        } else {
+            timeout++;
+            rt_hw_us_delay(5);
+            if (timeout > I2C_STOPDET_TO * 100) {
+                LOG_I("%s, tiemout\n", __func__);
+                break;
+            }
+        }
+    }
+
+    if (i2c_wait_for_bb(i2c))
+        return 1;
+
+    i2c_flush_rxfifo(i2c);
+
+    return 0;
+}
+
+/*
+ * i2c_read - Read from i2c memory
+ * @chip:    target i2c address
+ * @addr:    address to read from
+ * @alen:
+ * @buffer:    buffer for read data
+ * @len:    no of bytes to be read
+ *
+ * Read from i2c memory.
+ */
+static int hal_i2c_read(uint8_t i2c_id, uint8_t dev, uint16_t addr, uint16_t alen, uint8_t *buffer, uint16_t len)
+{
+    unsigned int active = 0;
+    unsigned int time_count = 0;
+    struct i2c_regs *i2c;
+    int ret = 0;
+
+    i2c = get_i2c_base(i2c_id);
+
+    i2c_enable(i2c, true);
+
+    if (i2c_xfer_init(i2c, dev, addr, alen))
+        return 1;
+
+    while (len) {
+        if (!active) {
+            /*
+             * Avoid writing to ic_cmd_data multiple times
+             * in case this loop spins too quickly and the
+             * ic_status RFNE bit isn't set after the first
+             * write. Subsequent writes to ic_cmd_data can
+             * trigger spurious i2c transfer.
+             */
+            i2c_write_cmd_data(i2c, (dev <<1) | BIT_I2C_CMD_DATA_READ_BIT | BIT_I2C_CMD_DATA_STOP_BIT);
+            //mmio_write_32((uintptr_t)&i2c_base->ic_cmd_data, (dev <<1) | BIT_I2C_CMD_DATA_READ_BIT | BIT_I2C_CMD_DATA_STOP_BIT);
+            active = 1;
+        }
+
+        if (mmio_read_32((uintptr_t)&i2c->ic_raw_intr_stat) & BIT_I2C_INT_RX_FULL) {
+            *buffer++ = (uint8_t)mmio_read_32((uintptr_t)&i2c->ic_cmd_data);
+            len--;
+            time_count = 0;
+            active = 0;
+        }
+        else {
+            rt_hw_us_delay(5);
+            time_count++;
+            if (time_count  >= I2C_BYTE_TO * 100)
+                return 1;
+        }
+    }
+
+    ret = i2c_xfer_finish(i2c);
+    i2c_disable(i2c);
+
+    return ret;
+}
+
+/*
+ * i2c_write - Write to i2c memory
+ * @chip:    target i2c address
+ * @addr:    address to read from
+ * @alen:
+ * @buffer:    buffer for read data
+ * @len:    no of bytes to be read
+ *
+ * Write to i2c memory.
+ */
+
+static int hal_i2c_write(uint8_t i2c_id, uint8_t dev, uint16_t addr, uint16_t alen, uint8_t *buffer, uint16_t len)
+{
+    struct i2c_regs *i2c;
+    int ret = 0;
+    i2c = get_i2c_base(i2c_id);
+
+    i2c_enable(i2c, true);
+
+    if (i2c_xfer_init(i2c, dev, addr, alen))
+        return 1;
+
+    while (len) {
+        if (i2c->ic_status & IC_STATUS_TFNF) {
+            if (--len == 0) {
+                i2c_write_cmd_data(i2c, *buffer | IC_STOP);
+                //mmio_write_32((uintptr_t)&i2c_base->ic_cmd_data, *buffer | IC_STOP);
+            } else {
+                i2c_write_cmd_data(i2c, *buffer);
+                //mmio_write_32((uintptr_t)&i2c_base->ic_cmd_data, *buffer);
+            }
+            buffer++;
+        } else
+            LOG_I("len=%d, ic status is not TFNF\n", len);
+    }
+    ret = i2c_xfer_finish(i2c);
+    i2c_disable(i2c);
+    return ret;
+}
+
+/*
+ * hal_i2c_set_bus_speed - Set the i2c speed
+ * @speed:    required i2c speed
+ *
+ * Set the i2c speed.
+ */
+static void i2c_set_bus_speed(struct i2c_regs *i2c, unsigned int speed)
+{
+    unsigned int cntl;
+    unsigned int hcnt, lcnt;
+    int i2c_spd;
+
+    if (speed > I2C_FAST_SPEED)
+        i2c_spd = IC_SPEED_MODE_MAX;
+    else if ((speed <= I2C_FAST_SPEED) && (speed > I2C_STANDARD_SPEED))
+        i2c_spd = IC_SPEED_MODE_FAST;
+    else
+        i2c_spd = IC_SPEED_MODE_STANDARD;
+
+    /* to set speed cltr must be disabled */
+    i2c_enable(i2c, false);
+
+    cntl = (mmio_read_32((uintptr_t)&i2c->ic_con) & (~IC_CON_SPD_MSK));
+
+    switch (i2c_spd) {
+    case IC_SPEED_MODE_MAX:
+        cntl |= IC_CON_SPD_HS;
+            //hcnt = (u16)(((IC_CLK * MIN_HS100pF_SCL_HIGHTIME) / 1000) - 8);
+            /* 7 = 6+1 == MIN LEN +IC_FS_SPKLEN */
+            //lcnt = (u16)(((IC_CLK * MIN_HS100pF_SCL_LOWTIME) / 1000) - 1);
+            hcnt = 6;
+            lcnt = 8;
+
+        mmio_write_32((uintptr_t)&i2c->ic_hs_scl_hcnt, hcnt);
+        mmio_write_32((uintptr_t)&i2c->ic_hs_scl_lcnt, lcnt);
+        break;
+
+    case IC_SPEED_MODE_STANDARD:
+        cntl |= IC_CON_SPD_SS;
+
+        hcnt = (uint16_t)(((IC_CLK * MIN_SS_SCL_HIGHTIME) / 1000) - 7);
+        lcnt = (uint16_t)(((IC_CLK * MIN_SS_SCL_LOWTIME) / 1000) - 1);
+
+        mmio_write_32((uintptr_t)&i2c->ic_ss_scl_hcnt, hcnt);
+        mmio_write_32((uintptr_t)&i2c->ic_ss_scl_lcnt, lcnt);
+        break;
+
+    case IC_SPEED_MODE_FAST:
+    default:
+        cntl |= IC_CON_SPD_FS;
+        hcnt = (uint16_t)(((IC_CLK * MIN_FS_SCL_HIGHTIME) / 1000) - 7);
+        lcnt = (uint16_t)(((IC_CLK * MIN_FS_SCL_LOWTIME) / 1000) - 1);
+
+        mmio_write_32((uintptr_t)&i2c->ic_fs_scl_hcnt, hcnt);
+        mmio_write_32((uintptr_t)&i2c->ic_fs_scl_lcnt, lcnt);
+        break;
+    }
+
+    mmio_write_32((uintptr_t)&i2c->ic_con, cntl);
+
+    /* Enable back i2c now speed set */
+    i2c_enable(i2c, true);
+}
+
+/*
+ * __hal_i2c_init - Init function
+ * @speed:    required i2c speed
+ * @slaveaddr:    slave address for the device
+ *
+ * Initialization function.
+ */
+static void hal_i2c_init(uint8_t i2c_id)
+{
+    struct i2c_regs *i2c;
+    uint32_t i2c_intr;
+
+    LOG_I("%s, i2c-%d\n", __func__, i2c_id);
+    /* Disable i2c */
+    //Need to acquire lock here
+
+    i2c = get_i2c_base(i2c_id);
+    i2c_intr = get_i2c_intr(i2c_id);
+
+    // request_irq(i2c_intr, i2c_dw_isr, 0, "IC2_INTR int", &dw_i2c[i2c_id]);
+
+    i2c_enable(i2c, false);
+    mmio_write_32((uintptr_t)&i2c->ic_con, (IC_CON_SD | IC_CON_SPD_FS | IC_CON_MM | IC_CON_RE));
+    mmio_write_32((uintptr_t)&i2c->ic_rx_tl, IC_RX_TL);
+    mmio_write_32((uintptr_t)&i2c->ic_tx_tl, IC_TX_TL);
+    mmio_write_32((uintptr_t)&i2c->ic_intr_mask, 0x0);
+    i2c_set_bus_speed(i2c, I2C_SPEED);
+    //mmio_write_32((uintptr_t)&i2c->ic_sar, slaveaddr);
+    /* Enable i2c */
+    i2c_enable(i2c, false);
+
+    //Need to release lock here
+}
+
+static rt_ssize_t _master_xfer(struct rt_i2c_bus_device *bus,
+                             struct rt_i2c_msg msgs[],
+                             rt_uint32_t num)
+{
+    struct rt_i2c_msg *msg;
+    rt_uint32_t i;
+    rt_ssize_t ret = -RT_ERROR;
+
+    struct _i2c_bus *i2c = (struct _i2c_bus *)bus;
+
+    for (i = 0; i < num; i++)
+    {
+        msg = &msgs[i];
+
+        if (msg->flags & RT_I2C_RD)
+        {
+            hal_i2c_read(i2c->i2c_id, msg->addr, RT_NULL, 1, msg->buf, msg->len);
+        }
+        else
+        {
+            hal_i2c_write(i2c->i2c_id, msg->addr, RT_NULL, 1, msg->buf, msg->len);
+        }
+    }
+
+    return ret;
+}
+
+static void rt_hw_i2c_isr(int irqno, void *param)
+{
+    uint32_t stat, enabled;
+    struct i2c_regs *i2c = (struct i2c_regs *)param;
+
+    enabled = mmio_read_32((uintptr_t)&i2c->ic_enable);
+    stat = mmio_read_32((uintptr_t)&i2c->ic_intr_stat);
+
+    LOG_I("i2c interrupt stat: 0x%08x", stat);
+}
+
+static const struct rt_i2c_bus_device_ops i2c_ops =
+{
+    .master_xfer      = _master_xfer,
+    .slave_xfer       = RT_NULL,
+    .i2c_bus_control  = RT_NULL
+};
+
+int rt_hw_i2c_init(void)
+{
+    int result = RT_EOK;
+
+#ifdef BSP_USING_I2C0
+    PINMUX_CONFIG(IIC0_SCL, IIC0_SCL);
+    PINMUX_CONFIG(IIC0_SDA, IIC0_SDA);
+#endif /* BSP_USING_I2C0 */
+#ifdef BSP_USING_I2C1
+    PINMUX_CONFIG(PAD_MIPIRX1P, IIC1_SDA);
+    PINMUX_CONFIG(PAD_MIPIRX0N, IIC1_SCL);
+#endif /* BSP_USING_I2C1 */
+
+    for (rt_size_t i = 0; i < sizeof(_i2c_obj) / sizeof(struct _i2c_bus); i++)
+    {
+        hal_i2c_init(_i2c_obj->i2c_id);
+
+        _i2c_obj[i].parent.ops = &i2c_ops;
+
+        /* register i2c device */
+        if (rt_i2c_bus_device_register(&_i2c_obj[i].parent, _i2c_obj[i].device_name) == RT_EOK)
+        {
+            LOG_D("%s init success", _i2c_obj[i].device_name);
+        }
+        else
+        {
+            LOG_E("%s register failed", _i2c_obj[i].device_name);
+            result = -RT_ERROR;
+        }
+
+        uint32_t irqno = get_i2c_intr(_i2c_obj[i].i2c_id);
+        struct i2c_regs *_i2c = get_i2c_base(_i2c_obj[i].i2c_id);
+        rt_hw_interrupt_install(irqno, rt_hw_i2c_isr, _i2c, _i2c_obj[i].device_name);
+    }
+
+    return result;
+}
+INIT_BOARD_EXPORT(rt_hw_i2c_init);
+
+#endif /* RT_USING_I2C */
diff --git a/bsp/cvitek/drivers/drv_hw_i2c.h b/bsp/cvitek/drivers/drv_hw_i2c.h
new file mode 100644
index 0000000000..095550263b
--- /dev/null
+++ b/bsp/cvitek/drivers/drv_hw_i2c.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ *2024-02-14      ShichengChu  first version
+ */
+#ifndef __DRV_HW_I2C_H__
+#define __DRV_HW_I2C_H__
+
+#include <rtthread.h>
+#include "rtdevice.h"
+#include <rthw.h>
+
+#include "pinctrl.h"
+#include "mmio.h"
+
+#define I2C0                    0x0
+#define I2C1                    0x1
+#define I2C2                    0x2
+#define I2C3                    0x3
+#define I2C4                    0x4
+
+#define I2C0_BASE                0x4000000
+#define I2C1_BASE                0x4010000
+#define I2C2_BASE                0x4020000
+#define I2C3_BASE                0x4030000
+#define I2C4_BASE                0x4040000
+
+#define BIT_I2C_CMD_DATA_READ_BIT           (0x01 << 8)
+#define BIT_I2C_CMD_DATA_STOP_BIT           (0x01 << 9)
+
+/* bit definition */
+#define BIT_I2C_CON_MASTER_MODE              (0x01 << 0)
+#define BIT_I2C_CON_STANDARD_SPEED           (0x01 << 1)
+#define BIT_I2C_CON_FULL_SPEED               (0x02 << 1)
+#define BIT_I2C_CON_HIGH_SPEED               (0x03 << 1)
+#define BIT_I2C_CON_10B_ADDR_SLAVE           (0x01 << 3)
+#define BIT_I2C_CON_10B_ADDR_MASTER          (0x01 << 4)
+#define BIT_I2C_CON_RESTART_EN               (0x01 << 5)
+#define BIT_I2C_CON_SLAVE_DIS                (0x01 << 6)
+
+#define BIT_I2C_TAR_10B_ADDR_MASTER     (0x01 << 12)
+
+#define BIT_I2C_INT_RX_UNDER                 (0x01 << 0)
+#define BIT_I2C_INT_RX_OVER                  (0x01 << 1)
+#define BIT_I2C_INT_RX_FULL                  (0x01 << 2)
+#define BIT_I2C_INT_TX_OVER                  (0x01 << 3)
+#define BIT_I2C_INT_TX_EMPTY                 (0x01 << 4)
+#define BIT_I2C_INT_RD_REQ                   (0x01 << 5)
+#define BIT_I2C_INT_TX_ABRT                  (0x01 << 6)
+#define BIT_I2C_INT_RX_DONE                  (0x01 << 7)
+#define BIT_I2C_INT_ACTIVITY                 (0x01 << 8)
+#define BIT_I2C_INT_STOP_DET                 (0x01 << 9)
+#define BIT_I2C_INT_START_DET                (0x01 << 10)
+#define BIT_I2C_INT_GEN_ALL                  (0x01 << 11)
+#define I2C_INTR_MASTER_MASK         (BIT_I2C_INT_TX_ABRT | \
+                    BIT_I2C_INT_STOP_DET | \
+                    BIT_I2C_INT_RX_FULL | \
+                    BIT_I2C_INT_TX_EMPTY)
+
+#define BIT_I2C_INT_RX_UNDER_MASK            (0x01 << 0)
+#define BIT_I2C_INT_RX_OVER_MASK             (0x01 << 1)
+#define BIT_I2C_INT_RX_FULL_MASK             (0x01 << 2)
+#define BIT_I2C_INT_TX_OVER_MASK             (0x01 << 3)
+#define BIT_I2C_INT_TX_EMPTY_MASK            (0x01 << 4)
+#define BIT_I2C_INT_RD_REQ_MASK              (0x01 << 5)
+#define BIT_I2C_INT_TX_ABRT_MASK             (0x01 << 6)
+#define BIT_I2C_INT_RX_DONE_MASK             (0x01 << 7)
+#define BIT_I2C_INT_ACTIVITY_MASK            (0x01 << 8)
+#define BIT_I2C_INT_STOP_DET_MASK            (0x01 << 9)
+#define BIT_I2C_INT_START_DET_MASK           (0x01 << 10)
+#define BIT_I2C_INT_GEN_ALL_MASK             (0x01 << 11)
+
+#define BIT_I2C_INT_RX_UNDER_RAW             (0x01 << 0)
+#define BIT_I2C_INT_RX_OVER_RAW              (0x01 << 1)
+#define BIT_I2C_INT_RX_FULL_RAW              (0x01 << 2)
+#define BIT_I2C_INT_TX_OVER_RAW              (0x01 << 3)
+#define BIT_I2C_INT_TX_EMPTY_RAW             (0x01 << 4)
+#define BIT_I2C_INT_RD_REQ_RAW               (0x01 << 5)
+#define BIT_I2C_INT_TX_ABRT_RAW              (0x01 << 6)
+#define BIT_I2C_INT_RX_DONE_RAW              (0x01 << 7)
+#define BIT_I2C_INT_ACTIVITY_RAW             (0x01 << 8)
+#define BIT_I2C_INT_STOP_DET_RAW             (0x01 << 9)
+#define BIT_I2C_INT_START_DET_RAW            (0x01 << 10)
+#define BIT_I2C_INT_GEN_ALL_RAW              (0x01 << 11)
+
+#define BIT_I2C_DMA_CR_TDMAE                 (0x01 << 1)
+#define BIT_I2C_DMA_CR_RDMAE                 (0x01 << 0)
+
+struct i2c_regs {
+    volatile uint32_t ic_con;        /* 0x00 */
+    volatile uint32_t ic_tar;        /* 0x04 */
+    volatile uint32_t ic_sar;        /* 0x08 */
+    volatile uint32_t ic_hs_maddr;    /* 0x0c */
+    volatile uint32_t ic_cmd_data;    /* 0x10 */
+    volatile uint32_t ic_ss_scl_hcnt;    /* 0x14 */
+    volatile uint32_t ic_ss_scl_lcnt;    /* 0x18 */
+    volatile uint32_t ic_fs_scl_hcnt;    /* 0x1c */
+    volatile uint32_t ic_fs_scl_lcnt;    /* 0x20 */
+    volatile uint32_t ic_hs_scl_hcnt;    /* 0x24 */
+    volatile uint32_t ic_hs_scl_lcnt;    /* 0x28 */
+    volatile uint32_t ic_intr_stat;    /* 0x2c */
+    volatile uint32_t ic_intr_mask;    /* 0x30 */
+    volatile uint32_t ic_raw_intr_stat;    /* 0x34 */
+    volatile uint32_t ic_rx_tl;        /* 0x38 */
+    volatile uint32_t ic_tx_tl;        /* 0x3c */
+    volatile uint32_t ic_clr_intr;     /* 0x40 */
+    volatile uint32_t ic_clr_rx_under;   /* 0x44 */
+    volatile uint32_t ic_clr_rx_over;    /* 0x48 */
+    volatile uint32_t ic_clr_tx_over;    /* 0x4c */
+    volatile uint32_t ic_clr_rd_req;     /* 0x50 */
+    volatile uint32_t ic_clr_tx_abrt;    /* 0x54 */
+    volatile uint32_t ic_clr_rx_done;    /* 0x58 */
+    volatile uint32_t ic_clr_activity;   /* 0x5c */
+    volatile uint32_t ic_clr_stop_det;   /* 0x60 */
+    volatile uint32_t ic_clr_start_det;  /* 0x64 */
+    volatile uint32_t ic_clr_gen_call;   /* 0x68 */
+    volatile uint32_t ic_enable;         /* 0x6c */
+    volatile uint32_t ic_status;         /* 0x70 */
+    volatile uint32_t ic_txflr;          /* 0x74 */
+    volatile uint32_t ic_rxflr;          /* 0x78 */
+    volatile uint32_t ic_sda_hold;       /* 0x7c */
+    volatile uint32_t ic_tx_abrt_source;    /* 0x80 */
+    volatile uint32_t ic_slv_dat_nack_only; /* 0x84 */
+    volatile uint32_t ic_dma_cr;      /* 0x88 */
+    volatile uint32_t ic_dma_tdlr;    /* 0x8c */
+    volatile uint32_t ic_dma_rdlr;    /* 0x90 */
+    volatile uint32_t ic_sda_setup;   /* 0x94 */
+    volatile uint32_t ic_ack_general_call; /* 0x98 */
+    volatile uint32_t ic_enable_status;    /* 0x9c */
+    volatile uint32_t ic_fs_spklen;    /* 0xa0 */
+    volatile uint32_t ic_hs_spklen;    /* 0xa4 */
+};
+
+#if !defined(IC_CLK)
+#define IC_CLK            100
+#endif
+
+#define NANO_TO_MICRO        1000
+
+/* High and low times in different speed modes (in ns) */
+#define MIN_SS_SCL_HIGHTIME    4000
+#define MIN_SS_SCL_LOWTIME     4700
+#define MIN_FS_SCL_HIGHTIME    600
+#define MIN_FS_SCL_LOWTIME     1300
+#define MIN_HS100pF_SCL_HIGHTIME 60
+#define MIN_HS100pF_SCL_LOWTIME    120
+#define MIN_HS400pF_SCL_HIGHTIME   160
+#define MIN_HS400pF_SCL_LOWTIME    320
+
+#define CONFIG_SYS_HZ        1000    /* decrementer freq: 1ms ticks */
+/* Worst case timeout for 1 byte is kept as 2ms */
+#define I2C_BYTE_TO        (CONFIG_SYS_HZ/500)
+
+#define I2C_STOPDET_TO        (CONFIG_SYS_HZ/500)
+#define I2C_BYTE_TO_BB        (I2C_BYTE_TO * 16)
+
+/* i2c control register definitions */
+#define IC_CON_SD        0x0040
+#define IC_CON_RE        0x0020
+#define IC_CON_10BITADDRMASTER    0x0010
+#define IC_CON_10BITADDR_SLAVE    0x0008
+#define IC_CON_SPD_MSK       0x0006
+#define IC_CON_SPD_SS        0x0002
+#define IC_CON_SPD_FS        0x0004
+#define IC_CON_SPD_HS        0x0006
+#define IC_CON_MM        0x0001
+
+/* i2c data buffer and command register definitions */
+#define IC_CMD            0x0100
+#define IC_STOP           0x0200
+
+/* i2c interrupt status register definitions */
+#define IC_GEN_CALL        0x0800
+#define IC_START_DET       0x0400
+#define IC_STOP_DET        0x0200
+#define IC_ACTIVITY        0x0100
+#define IC_RX_DONE         0x0080
+#define IC_TX_ABRT         0x0040
+#define IC_RD_REQ          0x0020
+#define IC_TX_EMPTY        0x0010
+#define IC_TX_OVER         0x0008
+#define IC_RX_FULL         0x0004
+#define IC_RX_OVER         0x0002
+#define IC_RX_UNDER        0x0001
+
+/* fifo threshold register definitions */
+#define IC_TL0            0x00
+#define IC_TL1            0x01
+#define IC_TL2            0x02
+#define IC_TL3            0x03
+#define IC_TL4            0x04
+#define IC_TL5            0x05
+#define IC_TL6            0x06
+#define IC_TL7            0x07
+#define IC_RX_TL        IC_TL0
+#define IC_TX_TL        IC_TL0
+
+/* i2c enable register definitions */
+#define IC_ENABLE        0x0001
+
+/* i2c status register  definitions */
+#define IC_STATUS_SA        0x0040
+#define IC_STATUS_MA        0x0020
+#define IC_STATUS_RFF       0x0010
+#define IC_STATUS_RFNE      0x0008
+#define IC_STATUS_TFE       0x0004
+#define IC_STATUS_TFNF      0x0002
+#define IC_STATUS_ACT       0x0001
+
+/* Speed Selection */
+#define IC_SPEED_MODE_STANDARD  1
+#define IC_SPEED_MODE_FAST      2
+#define IC_SPEED_MODE_MAX       3
+
+#define I2C_MAX_SPEED         3400000
+#define I2C_FAST_SPEED        400000
+#define I2C_STANDARD_SPEED    100000
+
+#define I2C_SPEED        I2C_FAST_SPEED
+
+#define I2C0_IRQ           (I2C_IRQ_BASE + 0)
+#define I2C1_IRQ           (I2C_IRQ_BASE + 1)
+#define I2C2_IRQ           (I2C_IRQ_BASE + 2)
+#define I2C3_IRQ           (I2C_IRQ_BASE + 3)
+#define I2C4_IRQ           (I2C_IRQ_BASE + 4)
+
+int rt_hw_i2c_init(void);
+
+#endif /* __DRV_HW_I2C_H__ */