[bsp][nxp] Add SPI1 config for FRDM-MCXN947 board

3 files changed, 60 insertions, 5 deletions

diff --git a/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c b/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c
index 37edd3daca..f539ace527 100644
--- a/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c
+++ b/bsp/nxp/mcx/mcxn/Libraries/drivers/drv_spi.c
@@ -17,6 +17,9 @@
 
 enum
 {
+#ifdef BSP_USING_SPI1
+    SPI1_INDEX,
+#endif
 #ifdef BSP_USING_SPI3
     SPI3_INDEX,
 #endif
@@ -55,6 +58,20 @@ struct lpc_spi
 
 static struct lpc_spi lpc_obj[] =
 {
+#ifdef BSP_USING_SPI1
+        {
+            .LPSPIx = LPSPI1,
+            .clock_attach_id = kFRO_HF_DIV_to_FLEXCOMM1,
+            .clock_div_name = kCLOCK_DivFlexcom1Clk,
+            .clock_name = kCLOCK_FroHf,
+            .tx_dma_request = kDmaRequestMuxLpFlexcomm1Tx,
+            .rx_dma_request = kDmaRequestMuxLpFlexcomm1Rx,
+            .DMAx = DMA0,
+            .tx_dma_chl = 0,
+            .rx_dma_chl = 1,
+            .name = "spi1",
+        },
+#endif
 #ifdef BSP_USING_SPI3
         {
             .LPSPIx = LPSPI3,
diff --git a/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/Kconfig b/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/Kconfig
index ef479082e0..c97957a5e2 100644
--- a/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/Kconfig
+++ b/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/Kconfig
@@ -60,6 +60,10 @@ menu "On-chip Peripheral Drivers"
             default y
 
             if BSP_USING_SPI
+                config BSP_USING_SPI1
+                    bool "Enable Flexcomm1 as SPI"
+                    default n
+
                 config BSP_USING_SPI3
                     bool "Enable Flexcomm3 as SPI"
                     default n
@@ -187,7 +191,31 @@ endmenu
 
 
 menu "Board extended module Drivers"
+    menuconfig BSP_USING_RW007
+        bool "Enable RW007"
+        default n
+        select BSP_USING_SPI1
+        select PKG_USING_RW007
+        select RT_USING_MEMPOOL
+        select RW007_NOT_USE_EXAMPLE_DRIVERS
+
+    if BSP_USING_RW007
+        config BOARD_RW007_SPI_BUS_NAME
+            string "RW007 BUS NAME"
+            default "spi1"
+
+        config BOARD_RW007_CS_PIN
+            hex "CS pin index"
+            default 27
+
+        config BOARD_RW007_INT_BUSY_PIN
+            hex "INT/BUSY pin index"
+            default 10
 
+        config BOARD_RW007_RST_PIN
+            hex "RESET pin index"
+            default 28
+    endif
 endmenu
 
 endmenu
diff --git a/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/MCUX_Config/board/pin_mux.c b/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/MCUX_Config/board/pin_mux.c
index 0ce94a7694..e6d3e1c8f4 100644
--- a/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/MCUX_Config/board/pin_mux.c
+++ b/bsp/nxp/mcx/mcxn/frdm-mcxn947/board/MCUX_Config/board/pin_mux.c
@@ -1,4 +1,4 @@
-
+#include "rtconfig.h"
 
 #include "fsl_common.h"
 #include "fsl_port.h"
@@ -43,17 +43,27 @@ void BOARD_InitBootPins(void)
 
     PORT0->PCR[6]   = PORT_PCR_MUX(12) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1) | PORT_PCR_SRE(0) | PORT_PCR_ODE(0);     /* CLKOUT */
 
+#ifdef BSP_USING_I2C1
     PORT0->PCR[24]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1) | PORT_PCR_SRE(0) | PORT_PCR_ODE(0);     /* FC1 I2C_SDA */
     PORT0->PCR[25]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1) | PORT_PCR_SRE(0) | PORT_PCR_ODE(0);     /* FC1 I2C_SCL */
+#endif
 
     PORT0->PCR[16]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1) | PORT_PCR_SRE(0) | PORT_PCR_ODE(0);     /* FC0 I2C_SDA */
     PORT0->PCR[17]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1) | PORT_PCR_SRE(0) | PORT_PCR_ODE(0);     /* FC0 I2C_SCL */
 
 
-//    PORT0->PCR[24]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC1_0 */
-//    PORT0->PCR[25]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC1_1 */
-//    PORT0->PCR[26]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC1_2 */
-//    PORT0->PCR[27]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* FC1_3 */
+#ifdef BSP_USING_SPI1
+    /* Arduino D11(P0_24), D12(P0_26), D13(P0_25) as SPI function, for RW007 MOSI, MISO, CLK  */
+    PORT0->PCR[24]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_24: FC1_0 */
+    PORT0->PCR[26]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_26: FC1_2 */
+    PORT0->PCR[25]   = PORT_PCR_MUX(2) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_25: FC1_1 */
+
+    /* Arduino D8(P0_28), D9(P0_10), D10(P0_27) as GPIO function, for RW007 RST, INT, CS */
+    /* drv_pin.c works well, follow lines just notice that pins we used as GPIO function */
+    // PORT0->PCR[28]   = PORT_PCR_MUX(0) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_28: P0_28 */
+    // PORT0->PCR[10]   = PORT_PCR_MUX(0) | PORT_PCR_PS(0) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_10: P0_27 */
+    // PORT0->PCR[27]   = PORT_PCR_MUX(0) | PORT_PCR_PS(1) | PORT_PCR_PE(1) | PORT_PCR_IBE(1);     /* P0_27: P0_27 */
+#endif
 
     /* PMOD */
     PORT1->PCR[0]   = PORT_PCR_MUX(2) | PORT_PCR_PS(0) | PORT_PCR_PE(0) | PORT_PCR_IBE(1);     /* FC3_0 SDO/D[0], FC3_SPI_MOSI */