[bsp][nrf5x]added the cherryusb adapter for nrf52840 (#9939)

10 files changed, 1579 insertions, 2 deletions

diff --git a/bsp/nrf5x/nrf52840/.ci/attachconfig/ci.attachconfig.yml b/bsp/nrf5x/nrf52840/.ci/attachconfig/ci.attachconfig.yml
index e923d7a470..a170defb5a 100644
--- a/bsp/nrf5x/nrf52840/.ci/attachconfig/ci.attachconfig.yml
+++ b/bsp/nrf5x/nrf52840/.ci/attachconfig/ci.attachconfig.yml
@@ -98,4 +98,13 @@ nimble.uart:
 segger:
     kconfig:
       - CONFIG_PKG_USING_SEGGER_RTT=y
-      - CONFIG_RT_USING_SERIAL_V2=y
\ No newline at end of file
+      - CONFIG_RT_USING_SERIAL_V2=y
+# ------ component CI ------
+component.cherryusb_hid_keyboard:
+    kconfig:
+      - CONFIG_RT_USING_CHERRYUSB=y
+      - CONFIG_RT_CHERRYUSB_DEVICE=y
+      - CONFIG_RT_CHERRYUSB_DEVICE_NRF5X=y
+      - CONFIG_RT_CHERRYUSB_DEVICE_HID=y
+      - CONFIG_RT_CHERRYUSB_DEVICE_TEMPLATE_HID_KEYBOARD=y
+      - CONFIG_RT_USING_MESSAGEQUEUE=y
\ No newline at end of file
diff --git a/bsp/nrf5x/nrf52840/board/SConscript b/bsp/nrf5x/nrf52840/board/SConscript
index d74f1a8861..3b5a2f0940 100644
--- a/bsp/nrf5x/nrf52840/board/SConscript
+++ b/bsp/nrf5x/nrf52840/board/SConscript
@@ -7,4 +7,10 @@ src = Glob('*.c')
 CPPPATH = [cwd]
 
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
+
 Return('group')
diff --git a/bsp/nrf5x/nrf52840/board/port/SConscript b/bsp/nrf5x/nrf52840/board/port/SConscript
new file mode 100644
index 0000000000..d15a67f358
--- /dev/null
+++ b/bsp/nrf5x/nrf52840/board/port/SConscript
@@ -0,0 +1,21 @@
+import os
+from building import *
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = []
+path =  []
+
+if GetDepend(['RT_USING_CHERRYUSB']):
+    src += Glob('cherryusb/cherryusb.c')
+    path += [cwd + '/cherryusb']
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path)
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
+
+Return('group')
\ No newline at end of file
diff --git a/bsp/nrf5x/nrf52840/board/port/cherryusb/cherryusb.c b/bsp/nrf5x/nrf52840/board/port/cherryusb/cherryusb.c
new file mode 100644
index 0000000000..3212e3ecc9
--- /dev/null
+++ b/bsp/nrf5x/nrf52840/board/port/cherryusb/cherryusb.c
@@ -0,0 +1,70 @@
+#include <rtthread.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdio.h>
+#include "nrf.h"
+#include "nrfx_usbd.h"
+#include "nrfx_clock.h"
+#include "nrfx_power.h"
+
+void usb_dc_low_level_post_init(void)
+{
+    /* Enable interrupt globally */
+    NRFX_IRQ_PRIORITY_SET(USBD_IRQn, NRFX_USBD_CONFIG_IRQ_PRIORITY);
+    NRFX_IRQ_ENABLE(USBD_IRQn);
+}
+
+extern void cherry_usb_hal_nrf_power_event(uint32_t event);
+static void power_event_handler(nrfx_power_usb_evt_t event)
+{
+    cherry_usb_hal_nrf_power_event((uint32_t)event);
+}
+
+void usb_dc_low_level_pre_init(void)
+{
+    uint32_t usb_reg;
+    const nrfx_power_usbevt_config_t config = {.handler = power_event_handler};
+    nrfx_power_usbevt_init(&config);
+    nrfx_power_usbevt_enable();
+    usb_reg = NRF_POWER->USBREGSTATUS;
+
+    if (usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk)
+    {
+        cherry_usb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
+    }
+
+    if (usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk)
+    {
+        cherry_usb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
+    }
+}
+
+void usb_low_clear_pending_irq(void)
+{
+    NVIC_ClearPendingIRQ(USBD_IRQn);
+}
+
+void usb_low_disable_irq(void)
+{
+    NVIC_DisableIRQ(USBD_IRQn);
+}
+
+int cherryusb_protocol_stack_init(void)
+{
+#ifdef RT_CHERRYUSB_DEVICE_TEMPLATE_CDC_ACM
+    extern void cdc_acm_init(void);
+    cdc_acm_init();
+    rt_kprintf("cdc acm example started. \r\n");
+#elif defined RT_CHERRYUSB_DEVICE_TEMPLATE_MSC
+    extern void msc_ram_init(void);
+    msc_ram_init();
+    rt_kprintf("msc ram example started. \r\n");
+#elif defined RT_CHERRYUSB_DEVICE_TEMPLATE_HID_KEYBOARD
+    extern void hid_keyboard_init(uint8_t busid, uintptr_t reg_base);
+    hid_keyboard_init(0,NULL);
+    rt_kprintf("hid keyboard example started. \r\n");
+#endif
+}
+
+INIT_APP_EXPORT(cherryusb_protocol_stack_init);
\ No newline at end of file
diff --git a/bsp/nrf5x/nrf52840/board/port/cherryusb/usb_config.h b/bsp/nrf5x/nrf52840/board/port/cherryusb/usb_config.h
new file mode 100644
index 0000000000..84acee78d0
--- /dev/null
+++ b/bsp/nrf5x/nrf52840/board/port/cherryusb/usb_config.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2022, sakumisu
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#ifndef CHERRYUSB_CONFIG_H
+#define CHERRYUSB_CONFIG_H
+
+
+#include <rtthread.h>
+
+/* ================ USB common Configuration ================ */
+#define CONFIG_USB_PRINTF(...) rt_kprintf(__VA_ARGS__)
+#define usb_malloc(size) malloc(size)
+#define usb_free(ptr)    free(ptr)
+
+#ifndef CONFIG_USB_DBG_LEVEL
+//#define CONFIG_USB_DBG_LEVEL USB_DBG_INFO
+#define CONFIG_USB_DBG_LEVEL 3
+#endif
+
+/* Enable print with color */
+#define CONFIG_USB_PRINTF_COLOR_ENABLE
+
+/* data align size when use dma */
+#ifndef CONFIG_USB_ALIGN_SIZE
+#define CONFIG_USB_ALIGN_SIZE 4
+#endif
+
+/* attribute data into no cache ram */
+#define USB_NOCACHE_RAM_SECTION __attribute__((section(".noncacheable")))
+
+/* ================= USB Device Stack Configuration ================ */
+
+/* Ep0 max transfer buffer, specially for receiving data from ep0 out */
+#define CONFIG_USBDEV_REQUEST_BUFFER_LEN 256
+
+#ifndef CONFIG_USBDEV_MSC_MAX_LUN
+#define CONFIG_USBDEV_MSC_MAX_LUN 1
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_MAX_BUFSIZE
+#define CONFIG_USBDEV_MSC_MAX_BUFSIZE 512
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_MANUFACTURER_STRING
+#define CONFIG_USBDEV_MSC_MANUFACTURER_STRING ""
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_PRODUCT_STRING
+#define CONFIG_USBDEV_MSC_PRODUCT_STRING ""
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_VERSION_STRING
+#define CONFIG_USBDEV_MSC_VERSION_STRING "0.01"
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_PRIO
+#define CONFIG_USBDEV_MSC_PRIO 4
+#endif
+
+#ifndef CONFIG_USBDEV_MSC_STACKSIZE
+#define CONFIG_USBDEV_MSC_STACKSIZE 2048
+#endif
+
+#ifndef CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE
+#define CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE 156
+#endif
+
+#ifndef CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE
+#define CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE 1536
+#endif
+
+#ifndef CONFIG_USBDEV_RNDIS_VENDOR_ID
+#define CONFIG_USBDEV_RNDIS_VENDOR_ID 0x0000ffff
+#endif
+
+#ifndef CONFIG_USBDEV_RNDIS_VENDOR_DESC
+#define CONFIG_USBDEV_RNDIS_VENDOR_DESC "CherryUSB"
+#endif
+
+#define CONFIG_USBDEV_RNDIS_USING_LWIP
+
+/* ================ USB HOST Stack Configuration ================== */
+
+#define CONFIG_USBHOST_MAX_RHPORTS          1
+#define CONFIG_USBHOST_MAX_EXTHUBS          1
+#define CONFIG_USBHOST_MAX_EHPORTS          4
+#define CONFIG_USBHOST_MAX_INTERFACES       8
+#define CONFIG_USBHOST_MAX_INTF_ALTSETTINGS 8
+#define CONFIG_USBHOST_MAX_ENDPOINTS        4
+
+#define CONFIG_USBHOST_MAX_CDC_ACM_CLASS 4
+#define CONFIG_USBHOST_MAX_HID_CLASS     4
+#define CONFIG_USBHOST_MAX_MSC_CLASS     2
+#define CONFIG_USBHOST_MAX_AUDIO_CLASS   1
+#define CONFIG_USBHOST_MAX_VIDEO_CLASS   1
+
+#define CONFIG_USBHOST_DEV_NAMELEN 16
+
+#ifndef CONFIG_USBHOST_PSC_PRIO
+#define CONFIG_USBHOST_PSC_PRIO 0
+#endif
+#ifndef CONFIG_USBHOST_PSC_STACKSIZE
+#define CONFIG_USBHOST_PSC_STACKSIZE 2048
+#endif
+
+#define CONFIG_USBHOST_MSOS_VENDOR_CODE 0x00
+
+/* Ep0 max transfer buffer */
+#define CONFIG_USBHOST_REQUEST_BUFFER_LEN 512
+
+#ifndef CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT
+#define CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT 500
+#endif
+
+#ifndef CONFIG_USBHOST_MSC_TIMEOUT
+#define CONFIG_USBHOST_MSC_TIMEOUT 5000
+#endif
+
+/* ================ USB Device Port Configuration ================*/
+#define CONFIG_USBDEV_MAX_BUS 1
+
+#define CONFIG_USBDEV_EP_NUM 8
+#define CONFIG_USBDEV_FSDEV_PMA_ACCESS 2
+
+/* ================ USB Host Port Configuration ==================*/
+
+#define CONFIG_USBHOST_PIPE_NUM 10
+
+/* ================ EHCI Configuration ================ */
+
+#define CONFIG_USB_EHCI_HCCR_BASE       (0x20072000)
+#define CONFIG_USB_EHCI_HCOR_BASE       (0x20072000 + 0x10)
+#define CONFIG_USB_EHCI_FRAME_LIST_SIZE 1024
+
+#endif
\ No newline at end of file
diff --git a/bsp/nrf5x/nrf52840/board/sdk_config.h b/bsp/nrf5x/nrf52840/board/sdk_config.h
index 25fa4938fa..0f0d9c1854 100644
--- a/bsp/nrf5x/nrf52840/board/sdk_config.h
+++ b/bsp/nrf5x/nrf52840/board/sdk_config.h
@@ -2472,7 +2472,7 @@
 // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
 //==========================================================
 #ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 0
+#define NRFX_POWER_ENABLED 1
 #endif
 // <o> NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
 
diff --git a/components/drivers/usb/cherryusb/Kconfig b/components/drivers/usb/cherryusb/Kconfig
index 67c6ad543a..256690cbab 100644
--- a/components/drivers/usb/cherryusb/Kconfig
+++ b/components/drivers/usb/cherryusb/Kconfig
@@ -68,6 +68,8 @@ if RT_USING_CHERRYUSB
                 bool "aic"
             config RT_CHERRYUSB_DEVICE_PUSB2
                 bool "pusb2"
+            config RT_CHERRYUSB_DEVICE_NRF5X
+                bool "nrf5x"
         endchoice
 
         config RT_CHERRYUSB_DEVICE_CDC_ACM
diff --git a/components/drivers/usb/cherryusb/SConscript b/components/drivers/usb/cherryusb/SConscript
index 58d0aa01c2..29cbd4ae80 100644
--- a/components/drivers/usb/cherryusb/SConscript
+++ b/components/drivers/usb/cherryusb/SConscript
@@ -28,6 +28,8 @@ if GetDepend(['RT_CHERRYUSB_DEVICE']):
     if GetDepend(['RT_CHERRYUSB_DEVICE_SPEED_HS']):
         CPPDEFINES+=['CONFIG_USB_HS']
 
+    if GetDepend(['RT_CHERRYUSB_DEVICE_NRF5X']):
+        src += Glob('port/nrf5x/usb_dc_nrf5x.c')
     if GetDepend(['RT_CHERRYUSB_DEVICE_FSDEV']):
         src += Glob('port/fsdev/usb_dc_fsdev.c')
     if GetDepend(['RT_CHERRYUSB_DEVICE_DWC2_ST']):
diff --git a/components/drivers/usb/cherryusb/port/nrf5x/README.md b/components/drivers/usb/cherryusb/port/nrf5x/README.md
new file mode 100644
index 0000000000..5f976a0272
--- /dev/null
+++ b/components/drivers/usb/cherryusb/port/nrf5x/README.md
@@ -0,0 +1,9 @@
+# Note
+
+## Support Chip List
+
+- NRF5x
+
+## Before Use
+
+- Your should implement `usb_dc_low_level_pre_init`,`usb_dc_low_level_post_init`,`usb_dc_low_level_deinit`.
\ No newline at end of file
diff --git a/components/drivers/usb/cherryusb/port/nrf5x/usb_dc_nrf5x.c b/components/drivers/usb/cherryusb/port/nrf5x/usb_dc_nrf5x.c
new file mode 100644
index 0000000000..6e42c690c6
--- /dev/null
+++ b/components/drivers/usb/cherryusb/port/nrf5x/usb_dc_nrf5x.c
@@ -0,0 +1,1321 @@
+#include <stddef.h>
+#include <mdk/nrf52840_bitfields.h>
+#include "nrf52840.h"
+#include "usb_def.h"
+#include "usb_dc.h"
+#include "usbd_core.h"
+
+#ifndef USBD_IRQHandler
+#define USBD_IRQHandler USBD_IRQHandler /*!< Use actual usb irq name instead */
+#endif
+
+#ifndef USBD_CONFIG_ISO_IN_ZLP
+#define USBD_CONFIG_ISO_IN_ZLP 0
+#endif
+
+/*!< The default platform is NRF52840 */
+#define NRF52_SERIES
+/*!< Ep nums */
+#define EP_NUMS 9
+/*!< Ep mps */
+#define EP_MPS 64
+/*!< Nrf5x special */
+#define EP_ISO_NUM 8
+
+/*!< USBD peripheral address base */
+#define NRF_USBD_BASE 0x40027000UL
+/*!< Clock peripheral address base */
+#define NRF_CLOCK_BASE 0x40000000UL
+
+#define USBD_IRQn 39
+
+#ifndef EP_ISO_MPS
+#define EP_ISO_MPS 64
+#endif
+
+#define CHECK_ADD_IS_RAM(address) ((((uint32_t)address) & 0xE0000000u) == 0x20000000u) ? 1 : 0
+
+/**
+ * @brief   Endpoint information structure
+ */
+typedef struct _usbd_ep_info
+{
+  uint16_t mps;       /*!< Maximum packet length of endpoint */
+  uint8_t eptype;     /*!< Endpoint Type */
+  uint8_t ep_stalled; /* Endpoint stall flag */
+  uint8_t ep_enable;  /* Endpoint enable */
+  uint8_t *xfer_buf;
+  uint32_t xfer_len;
+  uint32_t actual_xfer_len;
+  uint8_t ep_buffer[EP_MPS];
+  /*!< Other endpoint parameters that may be used */
+  volatile uint8_t is_using_dma;
+  volatile uint8_t add_flag;
+} usbd_ep_info;
+
+/*!< nrf52840 usb */
+struct _nrf52840_core_prvi
+{
+  uint8_t address;               /*!< address */
+  usbd_ep_info ep_in[EP_NUMS];   /*!< ep in */
+  usbd_ep_info ep_out[EP_NUMS];  /*!< ep out */
+  struct usb_setup_packet setup; /*!< Setup package that may be used in interrupt processing (outside the protocol stack) */
+  volatile uint8_t dma_running;
+  int8_t in_count;
+  volatile uint8_t iso_turn;
+  volatile uint8_t iso_tx_is_ready;
+  /**
+   * For nrf5x, easydma will not move the setup packet into RAM.
+   * We use a flag bit to judge whether the host sends setup,
+   * and then notify usbd_ep_read to and from the register to read the setup package
+   */
+  volatile uint8_t is_setup_packet;
+} usb_dc_cfg;
+
+__WEAK void usb_dc_low_level_pre_init(void)
+{
+}
+
+__WEAK void usb_dc_low_level_post_init(void)
+{
+}
+
+__WEAK void usb_dc_low_level_deinit(void)
+{
+}
+
+
+/**@brief Usbds the set remote wakeup.
+ *
+ * @param[in] busid do not used
+ *
+ * @retval
+ */
+int usbd_set_remote_wakeup (uint8_t busid)
+{
+    //TOGGLE_GPIOA9();
+    //#TASK 1.唤醒使能+挂起标志+休眠标志
+    // USB->CNTR |= (uint16_t)USB_CNTR_RESUME;
+    return -1;
+}
+
+/**
+ * @brief            Get setup package
+ * @pre              None
+ * @param[in]        setup Pointer to the address where the setup package is stored
+ * @retval           None
+ */
+static inline void get_setup_packet(struct usb_setup_packet *setup)
+{
+  setup->bmRequestType = (uint8_t)(NRF_USBD->BMREQUESTTYPE);
+  setup->bRequest = (uint8_t)(NRF_USBD->BREQUEST);
+  setup->wIndex = (uint16_t)(NRF_USBD->WINDEXL | ((NRF_USBD->WINDEXH) << 8));
+  setup->wLength = (uint16_t)(NRF_USBD->WLENGTHL | ((NRF_USBD->WLENGTHH) << 8));
+  setup->wValue = (uint16_t)(NRF_USBD->WVALUEL | ((NRF_USBD->WVALUEH) << 8));
+}
+
+/**
+ * @brief            Set tx easydma
+ * @pre              None
+ * @param[in]        ep      End point address
+ * @param[in]        ptr     Data ram ptr
+ * @param[in]        maxcnt  Max length
+ * @retval           None
+ */
+static void nrf_usbd_ep_easydma_set_tx(uint8_t ep, uint32_t ptr, uint32_t maxcnt)
+{
+  uint8_t epid = USB_EP_GET_IDX(ep);
+  if (epid == EP_ISO_NUM)
+  {
+    NRF_USBD->ISOIN.PTR = ptr;
+    NRF_USBD->ISOIN.MAXCNT = maxcnt;
+    return;
+  }
+  NRF_USBD->EPIN[epid].PTR = ptr;
+  NRF_USBD->EPIN[epid].MAXCNT = maxcnt;
+}
+
+/**
+ * @brief            Set rx easydma
+ * @pre              None
+ * @param[in]        ep      End point address
+ * @param[in]        ptr     Data ram ptr
+ * @param[in]        maxcnt  Max length
+ * @retval           None
+ */
+static void nrf_usbd_ep_easydma_set_rx(uint8_t ep, uint32_t ptr, uint32_t maxcnt)
+{
+  uint8_t epid = USB_EP_GET_IDX(ep);
+  if (epid == EP_ISO_NUM)
+  {
+    NRF_USBD->ISOOUT.PTR = ptr;
+    NRF_USBD->ISOOUT.MAXCNT = maxcnt;
+    return;
+  }
+  NRF_USBD->EPOUT[epid].PTR = ptr;
+  NRF_USBD->EPOUT[epid].MAXCNT = maxcnt;
+}
+
+/**@brief Usbds the set address.
+ *
+ * @param[in] usbid   do not used
+ * @param[in] address 8-bit valid address
+ *
+ * @retval >=0 success otherwise failureSet addressNone
+ */
+int usbd_set_address(uint8_t usbid, const uint8_t address)
+{
+  if (address == 0)
+  {
+    /*!< init 0 address */
+  }
+  else
+  {
+    /*!< For non-0 addresses, write the address to the register in the state phase of setting the address */
+  }
+
+  NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;
+  NRF_USBD->EVENTS_USBEVENT = 0;
+
+  NRF_USBD->INTENSET = USBD_INTEN_USBEVENT_Msk;
+  /*!< nothing to do, handled by hardware; but don't STALL */
+  usb_dc_cfg.address = address;
+  return 0;
+}
+
+uint8_t usbd_get_port_speed(const uint8_t port)
+{
+    return USB_SPEED_FULL;
+}
+
+/**@brief Usbds the ep open.
+ *
+ * @param[in] busid  do not used
+ * @param[in] ep_cfg Endpoint configuration structure pointer
+ *
+ * @retval >=0 success otherwise failureOpen endpointNone
+ */
+int usbd_ep_open(uint8_t busid, const struct usb_endpoint_descriptor *ep_cfg)
+{
+  /*!< ep id */
+  uint8_t epid = USB_EP_GET_IDX(ep_cfg->bEndpointAddress);
+  /*!< ep max packet length */
+  uint16_t mps = ep_cfg->wMaxPacketSize;
+  if (USB_EP_DIR_IS_IN(ep_cfg->bEndpointAddress))
+  {
+    /*!< In */
+    usb_dc_cfg.ep_in[epid].mps = mps;
+    usb_dc_cfg.ep_in[epid].eptype = ep_cfg->bmAttributes;
+    usb_dc_cfg.ep_in[epid].ep_enable = true;
+    /*!< Open ep */
+    if (ep_cfg->bmAttributes != USB_ENDPOINT_TYPE_ISOCHRONOUS)
+    {
+      /*!< Enable endpoint interrupt */
+      NRF_USBD->INTENSET = (1 << (USBD_INTEN_ENDEPIN0_Pos + epid));
+      /*!< Enable the in endpoint host to respond when sending in token */
+      NRF_USBD->EPINEN |= (1 << (epid));
+      __ISB();
+      __DSB();
+    }
+    else
+    {
+      NRF_USBD->EVENTS_ENDISOIN = 0;
+      /*!< SPLIT ISO buffer when ISO OUT endpoint is already opened. */
+      if (usb_dc_cfg.ep_out[EP_ISO_NUM].mps)
+        NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;
+
+      /*!< Clear SOF event in case interrupt was not enabled yet. */
+      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
+        NRF_USBD->EVENTS_SOF = 0;
+
+      /*!< Enable SOF and ISOIN interrupts, and ISOIN endpoint. */
+      NRF_USBD->INTENSET = USBD_INTENSET_ENDISOIN_Msk | USBD_INTENSET_SOF_Msk;
+      NRF_USBD->EPINEN |= USBD_EPINEN_ISOIN_Msk;
+    }
+  }
+  else if (USB_EP_DIR_IS_OUT(ep_cfg->bEndpointAddress))
+  {
+    /*!< Out */
+    usb_dc_cfg.ep_out[epid].mps = mps;
+    usb_dc_cfg.ep_out[epid].eptype = ep_cfg->bmAttributes;
+    usb_dc_cfg.ep_out[epid].ep_enable = true;
+    /*!< Open ep */
+    if (ep_cfg->bmAttributes != USB_ENDPOINT_TYPE_ISOCHRONOUS)
+    {
+      NRF_USBD->INTENSET = (1 << (USBD_INTEN_ENDEPOUT0_Pos + epid));
+      NRF_USBD->EPOUTEN |= (1 << (epid));
+      __ISB();
+      __DSB();
+      /*!< Write any value to SIZE register will allow nRF to ACK/accept data */
+      NRF_USBD->SIZE.EPOUT[epid] = 0;
+    }
+    else
+    {
+      /*!< SPLIT ISO buffer when ISO IN endpoint is already opened. */
+      if (usb_dc_cfg.ep_in[EP_ISO_NUM].mps)
+        NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;
+
+      /*!< Clear old events */
+      NRF_USBD->EVENTS_ENDISOOUT = 0;
+
+      /*!< Clear SOF event in case interrupt was not enabled yet. */
+      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
+        NRF_USBD->EVENTS_SOF = 0;
+
+      /*!< Enable SOF and ISOOUT interrupts, and ISOOUT endpoint. */
+      NRF_USBD->INTENSET = USBD_INTENSET_ENDISOOUT_Msk | USBD_INTENSET_SOF_Msk;
+      NRF_USBD->EPOUTEN |= USBD_EPOUTEN_ISOOUT_Msk;
+    }
+  }
+
+  /*!< Clear stall and reset DataToggle */
+  NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | (ep_cfg->bEndpointAddress);
+  NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | (ep_cfg->bEndpointAddress);
+
+  __ISB();
+  __DSB();
+
+  return 0;
+}
+
+/**@brief Usbds the ep close.
+ *
+ * @param[in] busid do not used
+ * @param[in] ep    ep ： Endpoint address
+ *
+ * @retval >=0 success otherwise failureClose endpointNone
+ */
+int usbd_ep_close(uint8_t busid, const uint8_t ep)
+{
+  /*!< ep id */
+  uint8_t epid = USB_EP_GET_IDX(ep);
+  if (epid != EP_ISO_NUM)
+  {
+
+    if (USB_EP_DIR_IS_OUT(ep))
+    {
+      usb_dc_cfg.ep_out[epid].ep_enable = false;
+      NRF_USBD->INTENCLR = (1 << (USBD_INTEN_ENDEPOUT0_Pos + epid));
+      NRF_USBD->EPOUTEN &= ~(1 << (epid));
+    }
+    else
+    {
+      usb_dc_cfg.ep_in[epid].ep_enable = false;
+      NRF_USBD->INTENCLR = (1 << (USBD_INTEN_ENDEPIN0_Pos + epid));
+      NRF_USBD->EPINEN &= ~(1 << (epid));
+    }
+  }
+  else
+  {
+    /*!< ISO EP */
+    if (USB_EP_DIR_IS_OUT(ep))
+    {
+      usb_dc_cfg.ep_out[epid].ep_enable = false;
+      usb_dc_cfg.ep_out[EP_ISO_NUM].mps = 0;
+      NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOOUT_Msk;
+      NRF_USBD->EPOUTEN &= ~USBD_EPOUTEN_ISOOUT_Msk;
+      NRF_USBD->EVENTS_ENDISOOUT = 0;
+    }
+    else
+    {
+      usb_dc_cfg.ep_in[epid].ep_enable = false;
+      usb_dc_cfg.ep_in[EP_ISO_NUM].mps = 0;
+      NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOIN_Msk;
+      NRF_USBD->EPINEN &= ~USBD_EPINEN_ISOIN_Msk;
+    }
+    /*!< One of the ISO endpoints closed, no need to split buffers any more. */
+    NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_OneDir;
+    /*!< When both ISO endpoint are close there is no need for SOF any more. */
+    if (usb_dc_cfg.ep_in[EP_ISO_NUM].mps + usb_dc_cfg.ep_out[EP_ISO_NUM].mps == 0)
+    {
+      NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk;
+    }
+  }
+  __ISB();
+  __DSB();
+
+  return 0;
+}
+
+/**
+ * @brief Setup in ep transfer setting and start transfer.
+ *
+ * This function is asynchronous.
+ * This function is similar to uart with tx dma.
+ *
+ * This function is called to write data to the specified endpoint. The
+ * supplied usbd_endpoint_callback function will be called when data is transmitted
+ * out.
+ *
+ * @param[in]  busid     do not used
+ * @param[in]  ep        Endpoint address corresponding to the one
+ *                       listed in the device configuration table
+ * @param[in]  data      Pointer to data to write
+ * @param[in]  data_len  Length of the data requested to write. This may
+ *                       be zero for a zero length status packet.
+ * @return 0 on success, negative errno code on fail.
+ */
+int usbd_ep_start_write(uint8_t busid, const uint8_t ep, const uint8_t *data, uint32_t data_len)
+{
+  uint8_t ep_idx = USB_EP_GET_IDX(ep);
+
+  if (!data && data_len)
+  {
+    return -1;
+  }
+  if (!usb_dc_cfg.ep_in[ep_idx].ep_enable)
+  {
+    return -2;
+  }
+  if ((uint32_t)data & 0x03)
+  {
+    return -3;
+  }
+
+  usb_dc_cfg.ep_in[ep_idx].xfer_buf = (uint8_t *)data;
+  usb_dc_cfg.ep_in[ep_idx].xfer_len = data_len;
+  usb_dc_cfg.ep_in[ep_idx].actual_xfer_len = 0;
+
+  if (data_len == 0)
+  {
+    /*!< write 0 len data */
+    nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)NULL, 0);
+    NRF_USBD->TASKS_STARTEPIN[ep_idx] = 1;
+  }
+  else
+  {
+    /*!< Not zlp */
+    data_len = MIN(data_len, usb_dc_cfg.ep_in[ep_idx].mps);
+    if (!CHECK_ADD_IS_RAM(data))
+    {
+      /*!< Data is not in ram */
+      /*!< Memcpy data to ram */
+      memcpy(usb_dc_cfg.ep_in[ep_idx].ep_buffer, data, data_len);
+      nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)usb_dc_cfg.ep_in[ep_idx].ep_buffer, data_len);
+    }
+    else
+    {
+      nrf_usbd_ep_easydma_set_tx(ep_idx, (uint32_t)data, data_len);
+    }
+    /**
+     * Note that starting DMA transmission is to transmit data to USB peripherals,
+     * and then wait for the host to get it
+     */
+    /*!< Start dma transfer */
+    if (ep_idx != EP_ISO_NUM)
+    {
+      NRF_USBD->TASKS_STARTEPIN[ep_idx] = 1;
+    }
+    else
+    {
+      // NRF_USBD->TASKS_STARTISOIN = 1;
+      usb_dc_cfg.iso_tx_is_ready = 1;
+    }
+  }
+  return 0;
+}
+
+/**
+ * @brief Setup out ep transfer setting and start transfer.
+ *
+ * This function is asynchronous.
+ * This function is similar to uart with rx dma.
+ *
+ * This function is called to read data to the specified endpoint. The
+ * supplied usbd_endpoint_callback function will be called when data is received
+ * in.
+ *
+ * @param[in]  busid     do not used
+ * @param[in]  ep        Endpoint address corresponding to the one
+ *                       listed in the device configuration table
+ * @param[in]  data      Pointer to data to read
+ * @param[in]  data_len  Max length of the data requested to read.
+ *
+ * @return 0 on success, negative errno code on fail.
+ */
+int     usbd_ep_start_read(uint8_t busid, const uint8_t ep, uint8_t *data, uint32_t data_len)
+{
+  uint8_t ep_idx = USB_EP_GET_IDX(ep);
+
+  if (!data && data_len)
+  {
+    return -1;
+  }
+  if (!usb_dc_cfg.ep_out[ep_idx].ep_enable)
+  {
+    return -2;
+  }
+  if ((uint32_t)data & 0x03)
+  {
+    return -3;
+  }
+
+  usb_dc_cfg.ep_out[ep_idx].xfer_buf = (uint8_t *)data;
+  usb_dc_cfg.ep_out[ep_idx].xfer_len = data_len;
+  usb_dc_cfg.ep_out[ep_idx].actual_xfer_len = 0;
+
+  if (data_len == 0)
+  {
+    return 0;
+  }
+  else
+  {
+    data_len = MIN(data_len, usb_dc_cfg.ep_out[ep_idx].mps);
+    if (!CHECK_ADD_IS_RAM(data))
+    {
+      /*!< Data address is not in ram */
+      // TODO:
+    }
+    else
+    {
+      if (ep_idx == 0)
+      {
+        NRF_USBD->TASKS_EP0RCVOUT = 1;
+      }
+      nrf_usbd_ep_easydma_set_rx(ep_idx, (uint32_t)data, data_len);
+    }
+  }
+  return 0;
+}
+
+/**
+ * @brief            Endpoint setting pause
+ * @pre              None
+ * @param[in]        busid     do not used
+ * @param[in]        ep ： Endpoint address
+ * @retval           >=0 success otherwise failure
+ */
+int usbd_ep_set_stall(uint8_t busid, const uint8_t ep)
+{
+  /*!< ep id */
+  uint8_t epid = USB_EP_GET_IDX(ep);
+  if (epid == 0)
+  {
+    NRF_USBD->TASKS_EP0STALL = 1;
+  }
+  else if (epid != EP_ISO_NUM)
+  {
+    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_Stall << USBD_EPSTALL_STALL_Pos) | (ep);
+  }
+  __ISB();
+  __DSB();
+  return 0;
+}
+
+/**
+ * @brief            Endpoint clear pause
+ * @pre              None
+ * @param[in]        busid     do not used
+ * @param[in]        ep ： Endpoint address
+ * @retval           >=0 success otherwise failure
+ */
+int usbd_ep_clear_stall(uint8_t usbid, const uint8_t ep)
+{
+  /*!< ep id */
+  uint8_t epid = USB_EP_GET_IDX(ep);
+
+  if (epid != 0 && epid != EP_ISO_NUM)
+  {
+    /**
+     * reset data toggle to DATA0
+     * First write this register with VALUE=Nop to select the endpoint, then either read it to get the status from
+     * VALUE, or write it again with VALUE=Data0 or Data1
+     */
+    NRF_USBD->DTOGGLE = ep;
+    NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | ep;
+
+    /*!< Clear stall */
+    NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | ep;
+
+    /*!< Write any value to SIZE register will allow nRF to ACK/accept data */
+    if (USB_EP_DIR_IS_OUT(ep))
+      NRF_USBD->SIZE.EPOUT[epid] = 0;
+
+    __ISB();
+    __DSB();
+  }
+
+  return 0;
+}
+
+/**
+ * @brief            Check endpoint status
+ * @pre              None
+ * @param[in]        busid     do not used
+ * @param[in]        ep ： Endpoint address
+ * @param[out]       stalled ： Outgoing endpoint status
+ * @retval           >=0 success otherwise failure
+ */
+int usbd_ep_is_stalled(uint8_t busid, const uint8_t ep, uint8_t *stalled)
+{
+  return 0;
+}
+
+/**
+ * @brief            USB initialization
+ * @pre              None
+ * @param[in]        busid     do not used
+ * @retval           >=0 success otherwise failure
+ */
+int usb_dc_init(uint8_t busid)
+{
+  /*!< dc init */
+  usb_dc_low_level_pre_init();
+
+  memset(&usb_dc_cfg, 0, sizeof(usb_dc_cfg));
+  /*!< Clear USB Event Interrupt */
+  NRF_USBD->EVENTS_USBEVENT = 0;
+  NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;
+
+  /*!< Reset interrupt */
+  NRF_USBD->INTENCLR = NRF_USBD->INTEN;
+  NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk |
+                       USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk | USBD_INTEN_STARTED_Msk;
+
+  usb_dc_low_level_post_init();
+  return 0;
+}
+
+/**
+ * @brief            USB deinit
+ * @pre              None
+ * @param[in]        busid     do not used
+ * @retval           >=0 success otherwise failure
+ */
+int usb_dc_deinit(uint8_t busid)
+{
+  /*!< dc deinit */
+  return 0;
+}
+
+/**
+ * @brief            USB interrupt processing function
+ * @pre              None
+ * @param[in]        None
+ * @retval           None
+ */
+void USBD_IRQHandler(void)
+{
+  uint32_t const inten = NRF_USBD->INTEN;
+  uint32_t int_status = 0;
+  volatile uint32_t usb_event = 0;
+  volatile uint32_t *regevt = &NRF_USBD->EVENTS_USBRESET;
+
+  /*!< Traverse USB events */
+  for (uint8_t i = 0; i < USBD_INTEN_EPDATA_Pos + 1; i++)
+  {
+    if ((inten & (1 << i)) && regevt[i])
+    {
+      int_status |= (1 << (i));
+      /*!< event clear */
+      regevt[i] = 0;
+      __ISB();
+      __DSB();
+    }
+  }
+
+  /*!< bit 24 */
+  if (int_status & USBD_INTEN_EPDATA_Msk)
+  {
+    /*!< out ep */
+    for (uint8_t ep_out_ct = 1; ep_out_ct <= 7; ep_out_ct++)
+    {
+      if ((NRF_USBD->EPDATASTATUS) & (1 << (16 + ep_out_ct)))
+      {
+        NRF_USBD->EPDATASTATUS |= (1 << (16 + ep_out_ct));
+        /*!< The data arrives at the usb fifo, starts the dma transmission, and transfers it to the user ram  */
+        NRF_USBD->TASKS_STARTEPOUT[ep_out_ct] = 1;
+      }
+    }
+    /*!< in ep */
+    for (uint8_t ep_in_ct = 1; ep_in_ct <= 7; ep_in_ct++)
+    {
+      if ((NRF_USBD->EPDATASTATUS) & (1 << (0 + ep_in_ct)))
+      {
+        /*!< in ep tranfer to host successfully */
+        NRF_USBD->EPDATASTATUS |= (1 << (0 + ep_in_ct));
+        if (usb_dc_cfg.ep_in[ep_in_ct].xfer_len > usb_dc_cfg.ep_in[ep_in_ct].mps)
+        {
+          /*!< Need start in again */
+          usb_dc_cfg.ep_in[ep_in_ct].xfer_buf += usb_dc_cfg.ep_in[ep_in_ct].mps;
+          usb_dc_cfg.ep_in[ep_in_ct].xfer_len -= usb_dc_cfg.ep_in[ep_in_ct].mps;
+          usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len += usb_dc_cfg.ep_in[ep_in_ct].mps;
+          if (usb_dc_cfg.ep_in[ep_in_ct].xfer_len > usb_dc_cfg.ep_in[ep_in_ct].mps)
+          {
+            nrf_usbd_ep_easydma_set_tx(ep_in_ct, (uint32_t)usb_dc_cfg.ep_in[ep_in_ct].xfer_buf, usb_dc_cfg.ep_in[ep_in_ct].mps);
+          }
+          else
+          {
+            nrf_usbd_ep_easydma_set_tx(ep_in_ct, (uint32_t)usb_dc_cfg.ep_in[ep_in_ct].xfer_buf, usb_dc_cfg.ep_in[ep_in_ct].xfer_len);
+          }
+          NRF_USBD->TASKS_STARTEPIN[ep_in_ct] = 1;
+        }
+        else
+        {
+          usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len += usb_dc_cfg.ep_in[ep_in_ct].xfer_len;
+          usb_dc_cfg.ep_in[ep_in_ct].xfer_len = 0;
+          usbd_event_ep_in_complete_handler(0, ep_in_ct | 0x80, usb_dc_cfg.ep_in[ep_in_ct].actual_xfer_len);
+        }
+      }
+    }
+  }
+
+  /*!< bit 23 */
+  if (int_status & USBD_INTEN_EP0SETUP_Msk)
+  {
+    /* Setup */
+    /*!< Storing this setup package will help the following procedures */
+    get_setup_packet(&(usb_dc_cfg.setup));
+    /*!< Nrf52840 will set the address automatically by hardware,
+         so the protocol stack of the address setting command sent by the host does not need to be processed */
+
+    if (usb_dc_cfg.setup.wLength == 0)
+    {
+      NRF_USBD->TASKS_EP0STATUS = 1;
+    }
+
+    if (usb_dc_cfg.setup.bRequest != USB_REQUEST_SET_ADDRESS)
+    {
+      usbd_event_ep0_setup_complete_handler(0, (uint8_t *)&(usb_dc_cfg.setup));
+    }
+  }
+
+  /*!< bit 22 */
+  if (int_status & USBD_INTEN_USBEVENT_Msk)
+  {
+    usb_event = NRF_USBD->EVENTCAUSE;
+    NRF_USBD->EVENTCAUSE = usb_event;
+    if (usb_event & USBD_EVENTCAUSE_SUSPEND_Msk)
+    {
+      NRF_USBD->LOWPOWER = 1;
+      /*!<  */
+    }
+    if (usb_event & USBD_EVENTCAUSE_RESUME_Msk)
+    {
+      /*!<  */
+    }
+    if (usb_event & USBD_EVENTCAUSE_USBWUALLOWED_Msk)
+    {
+      NRF_USBD->DPDMVALUE = USBD_DPDMVALUE_STATE_Resume;
+      NRF_USBD->TASKS_DPDMDRIVE = 1;
+      /**
+       * There is no Resume interrupt for remote wakeup, enable SOF for to report bus ready state
+       * Clear SOF event in case interrupt was not enabled yet.
+       */
+      if ((NRF_USBD->INTEN & USBD_INTEN_SOF_Msk) == 0)
+        NRF_USBD->EVENTS_SOF = 0;
+      NRF_USBD->INTENSET = USBD_INTENSET_SOF_Msk;
+    }
+  }
+
+  /*!< bit 21 */
+  if (int_status & USBD_INTEN_SOF_Msk)
+  {
+    bool iso_enabled = false;
+    /*!< ISOOUT: Transfer data gathered in previous frame from buffer to RAM */
+    if (NRF_USBD->EPOUTEN & USBD_EPOUTEN_ISOOUT_Msk)
+    {
+      iso_enabled = true;
+      /*!< If ZERO bit is set, ignore ISOOUT length */
+      if ((NRF_USBD->SIZE.ISOOUT) & USBD_SIZE_ISOOUT_ZERO_Msk)
+      {
+      }
+      else
+      {
+        /*!< Trigger DMA move data from Endpoint -> SRAM */
+        NRF_USBD->TASKS_STARTISOOUT = 1;
+        /*!< EP_ISO_NUM out using dma */
+        usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma = 1;
+      }
+    }
+
+    /*!< ISOIN: Notify client that data was transferred */
+    if (NRF_USBD->EPINEN & USBD_EPINEN_ISOIN_Msk)
+    {
+      iso_enabled = true;
+      if (usb_dc_cfg.iso_tx_is_ready == 1)
+      {
+        usb_dc_cfg.iso_tx_is_ready = 0;
+        NRF_USBD->TASKS_STARTISOIN = 1;
+      }
+    }
+
+    if (!iso_enabled)
+    {
+      /**
+       * ISO endpoint is not used, SOF is only enabled one-time for remote wakeup
+       * so we disable it now
+       */
+      NRF_USBD->INTENCLR = USBD_INTENSET_SOF_Msk;
+    }
+  }
+
+  /*!< bit 20 */
+  if (int_status & USBD_INTEN_ENDISOOUT_Msk)
+  {
+    if (usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma == 1)
+    {
+      usb_dc_cfg.ep_out[EP_ISO_NUM].is_using_dma = 0;
+      uint32_t read_count = NRF_USBD->SIZE.ISOOUT;
+      usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf += read_count;
+      usb_dc_cfg.ep_out[EP_ISO_NUM].actual_xfer_len += read_count;
+      usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len -= read_count;
+
+      if ((read_count < usb_dc_cfg.ep_out[EP_ISO_NUM].mps) || (usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len == 0))
+      {
+        usbd_event_ep_out_complete_handler(0, ((EP_ISO_NUM)&0x7f), usb_dc_cfg.ep_out[EP_ISO_NUM].actual_xfer_len);
+      }
+      else
+      {
+        if (usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len > usb_dc_cfg.ep_out[EP_ISO_NUM].mps)
+        {
+          nrf_usbd_ep_easydma_set_rx(((EP_ISO_NUM)&0x7f), (uint32_t)usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf, usb_dc_cfg.ep_out[EP_ISO_NUM].mps);
+        }
+        else
+        {
+          nrf_usbd_ep_easydma_set_rx(((EP_ISO_NUM)&0x7f), (uint32_t)usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_buf, usb_dc_cfg.ep_out[EP_ISO_NUM].xfer_len);
+        }
+      }
+    }
+  }
+
+  /**
+   * Traverse ordinary out endpoint events, starting from endpoint 1 to endpoint 7,
+   * and end 0 for special processing
+   */
+  for (uint8_t offset = 0; offset < 7; offset++)
+  {
+    if (int_status & (USBD_INTEN_ENDEPOUT1_Msk << offset))
+    {
+      /*!< Out 'offset' transfer complete */
+      uint32_t read_count = NRF_USBD->SIZE.EPOUT[offset + 1];
+      usb_dc_cfg.ep_out[offset + 1].xfer_buf += read_count;
+      usb_dc_cfg.ep_out[offset + 1].actual_xfer_len += read_count;
+      usb_dc_cfg.ep_out[offset + 1].xfer_len -= read_count;
+
+      if ((read_count < usb_dc_cfg.ep_out[offset + 1].mps) || (usb_dc_cfg.ep_out[offset + 1].xfer_len == 0))
+      {
+        usbd_event_ep_out_complete_handler(0, ((offset + 1) & 0x7f), usb_dc_cfg.ep_out[offset + 1].actual_xfer_len);
+      }
+      else
+      {
+        if (usb_dc_cfg.ep_out[offset + 1].xfer_len > usb_dc_cfg.ep_out[offset + 1].mps)
+        {
+          nrf_usbd_ep_easydma_set_rx(((offset + 1) & 0x7f), (uint32_t)usb_dc_cfg.ep_out[offset + 1].xfer_buf, usb_dc_cfg.ep_out[offset + 1].mps);
+        }
+        else
+        {
+          nrf_usbd_ep_easydma_set_rx(((offset + 1) & 0x7f), (uint32_t)usb_dc_cfg.ep_out[offset + 1].xfer_buf, usb_dc_cfg.ep_out[offset + 1].xfer_len);
+        }
+      }
+    }
+  }
+
+  /*!< bit 12 */
+  if (int_status & USBD_INTEN_ENDEPOUT0_Msk)
+  {
+    uint32_t read_count = NRF_USBD->SIZE.EPOUT[0];
+    usb_dc_cfg.ep_out[0].actual_xfer_len += read_count;
+    usb_dc_cfg.ep_out[0].xfer_len -= read_count;
+
+    if (usb_dc_cfg.ep_out[0].xfer_len == 0)
+    {
+      /*!< Enable the state phase of endpoint 0 */
+      NRF_USBD->TASKS_EP0STATUS = 1;
+    }
+
+    usbd_event_ep_out_complete_handler(0, 0x00, usb_dc_cfg.ep_out[0].actual_xfer_len);
+  }
+
+  /*!< bit 11 */
+  if (int_status & USBD_INTEN_ENDISOIN_Msk)
+  {
+  }
+
+  /*!< bit 10 */
+  if (int_status & USBD_INTEN_EP0DATADONE_Msk)
+  {
+    switch (usb_dc_cfg.setup.bmRequestType >> USB_REQUEST_DIR_SHIFT)
+    {
+    case 1:
+      /*!< IN */
+      if (usb_dc_cfg.ep_in[0].xfer_len > usb_dc_cfg.ep_in[0].mps)
+      {
+        usb_dc_cfg.ep_in[0].xfer_len -= usb_dc_cfg.ep_in[0].mps;
+        usb_dc_cfg.ep_in[0].actual_xfer_len += usb_dc_cfg.ep_in[0].mps;
+        usbd_event_ep_in_complete_handler(0, 0 | 0x80, usb_dc_cfg.ep_in[0].actual_xfer_len);
+      }
+      else
+      {
+        usb_dc_cfg.ep_in[0].actual_xfer_len += usb_dc_cfg.ep_in[0].xfer_len;
+        usb_dc_cfg.ep_in[0].xfer_len = 0;
+        /*!< Enable the state phase of endpoint 0 */
+        usbd_event_ep_in_complete_handler(0, 0 | 0x80, usb_dc_cfg.ep_in[0].actual_xfer_len);
+        NRF_USBD->TASKS_EP0STATUS = 1;
+      }
+      break;
+    case 0:
+      if (usb_dc_cfg.setup.bRequest != USB_REQUEST_SET_ADDRESS)
+      {
+        /*!< The data arrives at the usb fifo, starts the dma transmission, and transfers it to the user ram  */
+        NRF_USBD->TASKS_STARTEPOUT[0] = 1;
+      }
+      break;
+    }
+  }
+
+  /**
+   * Traversing ordinary in endpoint events, starting from endpoint 1 to endpoint 7,
+   * endpoint 0 special processing
+   */
+  for (uint8_t offset = 0; offset < 7; offset++)
+  {
+    if (int_status & (USBD_INTEN_ENDEPIN1_Msk << offset))
+    {
+      /*!< DMA move data completed */
+    }
+  }
+
+  /*!< bit 1 */
+  if (int_status & USBD_INTEN_STARTED_Msk)
+  {
+    /*!< Easy dma start transfer data */
+  }
+
+  /*!< bit 2 */
+  if (int_status & USBD_INTEN_ENDEPIN0_Msk)
+  {
+    /*!< EP0 IN DMA move data completed */
+  }
+
+  /*!< bit 0 */
+  if (int_status & USBD_INTEN_USBRESET_Msk)
+  {
+    NRF_USBD->EPOUTEN = 1UL;
+    NRF_USBD->EPINEN = 1UL;
+
+    for (int i = 0; i < 8; i++)
+    {
+      NRF_USBD->TASKS_STARTEPIN[i] = 0;
+      NRF_USBD->TASKS_STARTEPOUT[i] = 0;
+    }
+
+    NRF_USBD->TASKS_STARTISOIN = 0;
+    NRF_USBD->TASKS_STARTISOOUT = 0;
+
+    /*!< Clear USB Event Interrupt */
+    NRF_USBD->EVENTS_USBEVENT = 0;
+    NRF_USBD->EVENTCAUSE |= NRF_USBD->EVENTCAUSE;
+
+    /*!< Reset interrupt */
+    NRF_USBD->INTENCLR = NRF_USBD->INTEN;
+    NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk |
+                         USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk | USBD_INTEN_STARTED_Msk;
+
+    usbd_event_reset_handler(0);
+  }
+}
+
+/**
+ * Errata: USB cannot be enabled.
+ */
+static bool chyu_nrf52_errata_187(void)
+{
+#ifndef NRF52_SERIES
+  return false;
+#else
+#if defined(NRF52820_XXAA) || defined(DEVELOP_IN_NRF52820) || defined(NRF52833_XXAA) || defined(DEVELOP_IN_NRF52833) || defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  uint32_t var1 = *(uint32_t *)0x10000130ul;
+  uint32_t var2 = *(uint32_t *)0x10000134ul;
+#endif
+#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  if (var1 == 0x08)
+  {
+    switch (var2)
+    {
+    case 0x00ul:
+      return false;
+    case 0x01ul:
+      return true;
+    case 0x02ul:
+      return true;
+    case 0x03ul:
+      return true;
+    default:
+      return true;
+    }
+  }
+#endif
+#if defined(NRF52833_XXAA) || defined(DEVELOP_IN_NRF52833)
+  if (var1 == 0x0D)
+  {
+    switch (var2)
+    {
+    case 0x00ul:
+      return true;
+    case 0x01ul:
+      return true;
+    default:
+      return true;
+    }
+  }
+#endif
+#if defined(NRF52820_XXAA) || defined(DEVELOP_IN_NRF52820)
+  if (var1 == 0x10)
+  {
+    switch (var2)
+    {
+    case 0x00ul:
+      return true;
+    case 0x01ul:
+      return true;
+    case 0x02ul:
+      return true;
+    default:
+      return true;
+    }
+  }
+#endif
+  return false;
+#endif
+}
+
+/**
+ * Errata: USBD might not reach its active state.
+ */
+static bool chyu_nrf52_errata_171(void)
+{
+#ifndef NRF52_SERIES
+  return false;
+#else
+#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  uint32_t var1 = *(uint32_t *)0x10000130ul;
+  uint32_t var2 = *(uint32_t *)0x10000134ul;
+#endif
+#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  if (var1 == 0x08)
+  {
+    switch (var2)
+    {
+    case 0x00ul:
+      return true;
+    case 0x01ul:
+      return true;
+    case 0x02ul:
+      return true;
+    case 0x03ul:
+      return true;
+    default:
+      return true;
+    }
+  }
+#endif
+  return false;
+#endif
+}
+
+/**
+ * Errata: ISO double buffering not functional.
+ */
+static bool chyu_nrf52_errata_166(void)
+{
+#ifndef NRF52_SERIES
+  return false;
+#else
+#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  uint32_t var1 = *(uint32_t *)0x10000130ul;
+  uint32_t var2 = *(uint32_t *)0x10000134ul;
+#endif
+#if defined(NRF52840_XXAA) || defined(DEVELOP_IN_NRF52840)
+  if (var1 == 0x08)
+  {
+    switch (var2)
+    {
+    case 0x00ul:
+      return true;
+    case 0x01ul:
+      return true;
+    case 0x02ul:
+      return true;
+    case 0x03ul:
+      return true;
+    default:
+      return true;
+    }
+  }
+#endif
+  return false;
+#endif
+}
+
+#ifdef SOFTDEVICE_PRESENT
+
+#include "nrf_mbr.h"
+#include "nrf_sdm.h"
+#include "nrf_soc.h"
+
+#ifndef SD_MAGIC_NUMBER
+#define SD_MAGIC_NUMBER 0x51B1E5DB
+#endif
+
+static inline bool is_sd_existed(void)
+{
+  return *((uint32_t *)(SOFTDEVICE_INFO_STRUCT_ADDRESS + 4)) == SD_MAGIC_NUMBER;
+}
+
+/**
+ * check if SD is existed and enabled
+ */
+static inline bool is_sd_enabled(void)
+{
+  if (!is_sd_existed())
+    return false;
+
+  uint8_t sd_en = false;
+  (void)sd_softdevice_is_enabled(&sd_en);
+  return sd_en;
+}
+#endif
+
+static bool hfclk_running(void)
+{
+#ifdef SOFTDEVICE_PRESENT
+  if (is_sd_enabled())
+  {
+    uint32_t is_running = 0;
+    (void)sd_clock_hfclk_is_running(&is_running);
+    return (is_running ? true : false);
+  }
+#endif
+
+#if defined(CLOCK_HFCLKSTAT_SRC_Xtal) || defined(__NRFX_DOXYGEN__)
+  return (NRF_CLOCK->HFCLKSTAT & (CLOCK_HFCLKSTAT_STATE_Msk | CLOCK_HFCLKSTAT_SRC_Msk)) ==
+         (CLOCK_HFCLKSTAT_STATE_Msk | (CLOCK_HFCLKSTAT_SRC_Xtal << CLOCK_HFCLKSTAT_SRC_Pos));
+#else
+  return (NRF_CLOCK->HFCLKSTAT & (CLOCK_HFCLKSTAT_STATE_Msk | CLOCK_HFCLKSTAT_SRC_Msk)) ==
+         (CLOCK_HFCLKSTAT_STATE_Msk | (CLOCK_HFCLKSTAT_SRC_HFXO << CLOCK_HFCLKSTAT_SRC_Pos));
+#endif
+}
+
+enum
+{
+  NRF_CLOCK_EVENT_HFCLKSTARTED = offsetof(NRF_CLOCK_Type, EVENTS_HFCLKSTARTED), /*!< HFCLK oscillator started. */
+};
+
+enum
+{
+  NRF_CLOCK_TASK_HFCLKSTART = offsetof(NRF_CLOCK_Type, TASKS_HFCLKSTART), /*!< Start HFCLK clock source. */
+  NRF_CLOCK_TASK_HFCLKSTOP = offsetof(NRF_CLOCK_Type, TASKS_HFCLKSTOP),   /*!< Stop HFCLK clock source. */
+};
+
+static void hfclk_enable(void)
+{
+  /*!< already running, nothing to do */
+  if (hfclk_running())
+    return;
+
+#ifdef SOFTDEVICE_PRESENT
+  if (is_sd_enabled())
+  {
+    (void)sd_clock_hfclk_request();
+    return;
+  }
+#endif
+
+  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_EVENT_HFCLKSTARTED)) = 0x0UL;
+  volatile uint32_t dummy = *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + (uint32_t)NRF_CLOCK_EVENT_HFCLKSTARTED));
+  (void)dummy;
+  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_TASK_HFCLKSTART)) = 0x1UL;
+}
+
+static void hfclk_disable(void)
+{
+#ifdef SOFTDEVICE_PRESENT
+  if (is_sd_enabled())
+  {
+    (void)sd_clock_hfclk_release();
+    return;
+  }
+#endif
+
+  *((volatile uint32_t *)((uint8_t *)NRF_CLOCK + NRF_CLOCK_TASK_HFCLKSTOP)) = 0x1UL;
+}
+
+/**
+ * Power & Clock Peripheral on nRF5x to manage USB
+ * USB Bus power is managed by Power module, there are 3 VBUS power events:
+ * Detected, Ready, Removed. Upon these power events, This function will
+ * enable ( or disable ) usb & hfclk peripheral, set the usb pin pull up
+ * accordingly to the controller Startup/Standby Sequence in USBD 51.4 specs.
+ * Therefore this function must be called to handle USB power event by
+ * - nrfx_power_usbevt_init() : if Softdevice is not used or enabled
+ * - SoftDevice SOC event : if SD is used and enabled
+ */
+void cherry_usb_hal_nrf_power_event(uint32_t event)
+{
+  enum
+  {
+    USB_EVT_DETECTED = 0,
+    USB_EVT_REMOVED = 1,
+    USB_EVT_READY = 2
+  };
+
+  switch (event)
+  {
+  case USB_EVT_DETECTED:
+    if (!NRF_USBD->ENABLE)
+    {
+      /*!< Prepare for receiving READY event: disable interrupt since we will blocking wait */
+      NRF_USBD->INTENCLR = USBD_INTEN_USBEVENT_Msk;
+      NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk;
+      __ISB();
+      __DSB();
+
+#ifdef NRF52_SERIES /*!< NRF53 does not need this errata */
+      /*!< ERRATA 171, 187, 166 */
+      if (chyu_nrf52_errata_187())
+      {
+        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
+        {
+          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
+          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+        }
+        else
+        {
+          *((volatile uint32_t *)(0x4006ED14)) = 0x00000003;
+        }
+      }
+
+      if (chyu_nrf52_errata_171())
+      {
+        if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
+        {
+          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
+          *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+        }
+        else
+        {
+          *((volatile uint32_t *)(0x4006EC14)) = 0x000000C0;
+        }
+      }
+#endif
+
+      /*!< Enable the peripheral (will cause Ready event) */
+      NRF_USBD->ENABLE = 1;
+      __ISB();
+      __DSB();
+
+      /*!< Enable HFCLK */
+      hfclk_enable();
+    }
+    break;
+
+  case USB_EVT_READY:
+    /**
+     * Skip if pull-up is enabled and HCLK is already running.
+     * Application probably call this more than necessary.
+     */
+    if (NRF_USBD->USBPULLUP && hfclk_running())
+      break;
+
+    /*!< Waiting for USBD peripheral enabled */
+    while (!(USBD_EVENTCAUSE_READY_Msk & NRF_USBD->EVENTCAUSE))
+    {
+    }
+
+    NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk;
+    __ISB();
+    __DSB();
+
+#ifdef NRF52_SERIES
+    if (chyu_nrf52_errata_171())
+    {
+      if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
+      {
+        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+        *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
+        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+      }
+      else
+      {
+        *((volatile uint32_t *)(0x4006EC14)) = 0x00000000;
+      }
+    }
+
+    if (chyu_nrf52_errata_187())
+    {
+      if (*((volatile uint32_t *)(0x4006EC00)) == 0x00000000)
+      {
+        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+        *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
+        *((volatile uint32_t *)(0x4006EC00)) = 0x00009375;
+      }
+      else
+      {
+        *((volatile uint32_t *)(0x4006ED14)) = 0x00000000;
+      }
+    }
+
+    if (chyu_nrf52_errata_166())
+    {
+      *((volatile uint32_t *)(NRF_USBD_BASE + 0x800)) = 0x7E3;
+      *((volatile uint32_t *)(NRF_USBD_BASE + 0x804)) = 0x40;
+
+      __ISB();
+      __DSB();
+    }
+#endif
+
+    /*!< ISO buffer Lower half for IN, upper half for OUT */
+    NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN;
+
+    /*!< Enable bus-reset interrupt */
+    NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk;
+
+    /*!< Enable interrupt, priorities should be set by application */
+    /*!< clear pending irq */
+    NVIC->ICPR[(((uint32_t)USBD_IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)USBD_IRQn) & 0x1FUL));
+    /**
+     * Don't enable USBD interrupt yet, if dcd_init() did not finish yet
+     * Interrupt will be enabled by tud_init(), when USB stack is ready
+     * to handle interrupts.
+     */
+    /*!< Wait for HFCLK */
+    while (!hfclk_running())
+    {
+    }
+
+    /*!< Enable pull up */
+    NRF_USBD->USBPULLUP = 1;
+    __ISB();
+    __DSB();
+    break;
+
+  case USB_EVT_REMOVED:
+    if (NRF_USBD->ENABLE)
+    {
+      /*!< Disable pull up */
+      NRF_USBD->USBPULLUP = 0;
+      __ISB();
+      __DSB();
+
+      /*!< Disable Interrupt */
+      NVIC->ICER[(((uint32_t)USBD_IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)USBD_IRQn) & 0x1FUL));
+      __DSB();
+      __ISB();
+      /*!< disable all interrupt */
+      NRF_USBD->INTENCLR = NRF_USBD->INTEN;
+
+      NRF_USBD->ENABLE = 0;
+      __ISB();
+      __DSB();
+      hfclk_disable();
+    }
+    break;
+
+  default:
+    break;
+  }
+}
\ No newline at end of file