[add] RNG, CRC, HASH, CRYP driver.

4 files changed, 620 insertions, 4 deletions

diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
index 8f442b3087..39709fbedc 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
@@ -34,8 +34,8 @@
 #define HAL_MODULE_ENABLED  
 #define HAL_ADC_MODULE_ENABLED
 /*#define HAL_CEC_MODULE_ENABLED   */
-/*#define HAL_CRC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
 #define HAL_DAC_MODULE_ENABLED
 #define HAL_DCMI_MODULE_ENABLED
 /*#define HAL_DSI_MODULE_ENABLED   */
@@ -43,7 +43,7 @@
 /*#define HAL_DTS_MODULE_ENABLED   */
 /*#define HAL_ETH_MODULE_ENABLED   */
 #define HAL_FDCAN_MODULE_ENABLED
-/*#define HAL_HASH_MODULE_ENABLED   */
+#define HAL_HASH_MODULE_ENABLED
 /*#define HAL_HCD_MODULE_ENABLED   */
 #define HAL_HSEM_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
@@ -56,7 +56,7 @@
 /*#define HAL_NOR_MODULE_ENABLED   */
 /*#define HAL_PCD_MODULE_ENABLED   */
 #define HAL_QSPI_MODULE_ENABLED
-/*#define HAL_RNG_MODULE_ENABLED   */
+#define HAL_RNG_MODULE_ENABLED
 #define HAL_SAI_MODULE_ENABLED
 #define HAL_SD_MODULE_ENABLED
 /*#define HAL_MMC_MODULE_ENABLED   */
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index 27d7a2daa2..1958e2e516 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -26,6 +26,9 @@
 
 /* Private typedef -----------------------------------------------------------*/
 /* USER CODE BEGIN TD */
+DMA_HandleTypeDef hdma_hash_in    = {0};
+DMA_HandleTypeDef hdma_cryp_in    = {0};
+DMA_HandleTypeDef hdma_cryp_out   = {0};
 DMA_HandleTypeDef hdma_sai2_a     = {0};
 DMA_HandleTypeDef hdma_sai2_b     = {0};
 DMA_HandleTypeDef hdma_sai4_a     = {0};
@@ -1821,6 +1824,251 @@ void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel)
 }
 
 /**
+* @brief HASH MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hhash: HASH handle pointer
+* @retval None
+*/
+void HAL_HASH_MspInit(HASH_HandleTypeDef* hhash)
+{
+  /* USER CODE BEGIN HASH2_MspInit 0 */
+  /* USER CODE END HASH2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_HASH2_CLK_ENABLE();
+  /* USER CODE BEGIN HASH2_MspInit 1 */
+    __HAL_RCC_DMAMUX_CLK_ENABLE();
+    
+    /* Peripheral DMA init*/
+    hdma_hash_in.Instance = DMA2_Stream7;
+    hdma_hash_in.Init.Request = DMA_REQUEST_HASH2_IN;
+    hdma_hash_in.Init.Direction = DMA_MEMORY_TO_PERIPH;
+    hdma_hash_in.Init.PeriphInc = DMA_PINC_DISABLE;
+    hdma_hash_in.Init.MemInc = DMA_MINC_ENABLE;
+    hdma_hash_in.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+    hdma_hash_in.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+    hdma_hash_in.Init.Mode = DMA_NORMAL;
+    hdma_hash_in.Init.Priority = DMA_PRIORITY_HIGH;
+    hdma_hash_in.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
+    hdma_hash_in.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL;
+    hdma_hash_in.Init.MemBurst = DMA_MBURST_SINGLE;
+    hdma_hash_in.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+    if (HAL_DMA_DeInit(&hdma_hash_in) != HAL_OK)
+    {
+      Error_Handler();
+    }
+    if (HAL_DMA_Init(&hdma_hash_in) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+    __HAL_LINKDMA(hhash,hdmain,hdma_hash_in);
+  /* USER CODE END HASH2_MspInit 1 */
+
+}
+
+/**
+* @brief HASH MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hhash: HASH handle pointer
+* @retval None
+*/
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef* hhash)
+{
+  /* USER CODE BEGIN HASH2_MspDeInit 0 */
+
+  /* USER CODE END HASH2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_HASH2_CLK_DISABLE();
+  /* USER CODE BEGIN HASH2_MspDeInit 1 */
+
+  /* USER CODE END HASH2_MspDeInit 1 */
+
+}
+
+/**
+* @brief CRC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hcrc: CRC handle pointer
+* @retval None
+*/
+void HAL_CRC_MspInit(CRC_HandleTypeDef* hcrc)
+{
+  if(hcrc->Instance==CRC2)
+  {
+  /* USER CODE BEGIN CRC2_MspInit 0 */
+
+  /* USER CODE END CRC2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_CRC2_CLK_ENABLE();
+  /* USER CODE BEGIN CRC2_MspInit 1 */
+
+  /* USER CODE END CRC2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief CRC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hcrc: CRC handle pointer
+* @retval None
+*/
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef* hcrc)
+{
+  if(hcrc->Instance==CRC2)
+  {
+  /* USER CODE BEGIN CRC2_MspDeInit 0 */
+
+  /* USER CODE END CRC2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_CRC2_CLK_DISABLE();
+  /* USER CODE BEGIN CRC2_MspDeInit 1 */
+
+  /* USER CODE END CRC2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief RNG MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrng: RNG handle pointer
+* @retval None
+*/
+void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
+{
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+  if(hrng->Instance==RNG2)
+  {
+  /* USER CODE BEGIN RNG2_MspInit 0 */
+
+  /* USER CODE END RNG2_MspInit 0 */
+  if(IS_ENGINEERING_BOOT_MODE())
+  {
+  /** Initializes the peripherals clock 
+  */
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RNG2;
+    PeriphClkInit.Rng2ClockSelection = RCC_RNG2CLKSOURCE_CSI;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+      Error_Handler();
+    }
+
+  }
+
+    /* Peripheral clock enable */
+    __HAL_RCC_RNG2_CLK_ENABLE();
+  /* USER CODE BEGIN RNG2_MspInit 1 */
+
+  /* USER CODE END RNG2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RNG MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrng: RNG handle pointer
+* @retval None
+*/
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
+{
+  if(hrng->Instance==RNG2)
+  {
+  /* USER CODE BEGIN RNG2_MspDeInit 0 */
+
+  /* USER CODE END RNG2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RNG2_CLK_DISABLE();
+  /* USER CODE BEGIN RNG2_MspDeInit 1 */
+
+  /* USER CODE END RNG2_MspDeInit 1 */
+  }
+
+}
+
+#if defined (CRYP1) || defined (CRYP2)
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef* hcryp)
+{
+    if(hcryp->Instance==CRYP2)
+    {
+        /* Peripheral clock enable */
+        __HAL_RCC_CRYP2_CLK_ENABLE();
+        __HAL_RCC_DMAMUX_CLK_ENABLE();
+
+       /* Peripheral DMA init*/
+        hdma_cryp_in.Instance = DMA2_Stream6;
+        hdma_cryp_in.Init.Request = DMA_REQUEST_CRYP2_IN;
+        hdma_cryp_in.Init.Direction = DMA_MEMORY_TO_PERIPH;
+        hdma_cryp_in.Init.PeriphInc = DMA_PINC_DISABLE;
+        hdma_cryp_in.Init.MemInc = DMA_MINC_ENABLE;
+        hdma_cryp_in.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+        hdma_cryp_in.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+        hdma_cryp_in.Init.Mode = DMA_NORMAL;
+        hdma_cryp_in.Init.Priority = DMA_PRIORITY_HIGH;
+        hdma_cryp_in.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+        if (HAL_DMA_DeInit(&hdma_cryp_in) != HAL_OK)
+        {
+            Error_Handler();
+        }
+        if (HAL_DMA_Init(&hdma_cryp_in) != HAL_OK)
+        {
+            Error_Handler();
+        }
+
+        __HAL_LINKDMA(hcryp,hdmain,hdma_cryp_in);
+
+        hdma_cryp_out.Instance = DMA2_Stream5;
+        hdma_cryp_out.Init.Request = DMA_REQUEST_CRYP2_OUT;
+        hdma_cryp_out.Init.Direction = DMA_PERIPH_TO_MEMORY;
+        hdma_cryp_out.Init.PeriphInc = DMA_PINC_DISABLE;
+        hdma_cryp_out.Init.MemInc = DMA_MINC_ENABLE;
+        hdma_cryp_out.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+        hdma_cryp_out.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+        hdma_cryp_out.Init.Mode = DMA_NORMAL;
+        hdma_cryp_out.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+        hdma_cryp_out.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+        if (HAL_DMA_DeInit(&hdma_cryp_out) != HAL_OK)
+        {
+            Error_Handler();
+        }
+        if (HAL_DMA_Init(&hdma_cryp_out) != HAL_OK)
+        {
+            Error_Handler();
+        }
+
+        __HAL_LINKDMA(hcryp,hdmaout,hdma_cryp_out);
+
+      /* USER CODE BEGIN CRYP_MspInit 1 */
+
+      /* USER CODE END CRYP_MspInit 1 */
+    }
+}
+
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef* hcryp)
+{
+
+  if(hcryp->Instance==CRYP2)
+  {
+  /* USER CODE BEGIN CRYP_MspDeInit 0 */
+
+  /* USER CODE END CRYP_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_CRYP2_CLK_DISABLE();
+
+    /* Peripheral DMA DeInit*/
+    HAL_DMA_DeInit(hcryp->hdmain);
+    HAL_DMA_DeInit(hcryp->hdmaout);
+  }
+  /* USER CODE BEGIN CRYP_MspDeInit 1 */
+
+  /* USER CODE END CRYP_MspDeInit 1 */
+
+}
+#endif
+
+/**
   * @brief  This function is executed in case of error occurrence.
   * @retval None
   */
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/SConscript b/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
index bf0b6388d4..0fc2c5a919 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
@@ -61,6 +61,9 @@ if GetDepend(['BSP_USING_WWDG']):
 if GetDepend(['BSP_USING_EXTI']):
     src += Glob('ports/drv_exti.c')
 
+if GetDepend(['BSP_USING_RNG']) or GetDepend(['BSP_USING_HASH']) or GetDepend(['BSP_USING_CRC']) or GetDepend(['BSP_USING_CRYP']):
+    src += Glob('ports/crypto_sample.c')
+
 if GetDepend(['BSP_USING_OPENAMP']):
     src +=  Glob('CubeMX_Config/CM4/Src/ipcc.c')
     src +=  Glob('CubeMX_Config/CM4/Src/openamp.c')
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/ports/crypto_sample.c b/bsp/stm32/stm32mp157a-st-ev1/board/ports/crypto_sample.c
new file mode 100644
index 0000000000..fcad8fb9ff
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/ports/crypto_sample.c
@@ -0,0 +1,365 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-27     thread-liu   first version
+ */
+
+#include <board.h>
+
+#include "drv_crypto.h"
+#include <hwcrypto.h>
+#include <string.h>
+#include <stdlib.h>
+
+#if defined(BSP_USING_RNG)
+static rt_err_t hw_rng_sample(int random_num)
+{
+    rt_err_t result = RT_EOK;
+    int i = 0, num0 = 0, num1 = 0;
+
+    if (random_num == 0)
+    {
+        return RT_ERROR;
+    }
+
+    for (i = 0; i< random_num; i++)
+    {
+        result = rt_hwcrypto_rng_update();
+        rt_kprintf("%d ", result);
+        result%2 ? num1++ : num0++;
+    }
+    rt_kprintf("\neven numbers : %d, odd numbers: %d\n",num1, num0);
+
+    return RT_EOK;
+}
+#endif
+
+#if defined(BSP_USING_CRC)
+static void hw_crc_sample(uint8_t *temp, int size)
+{
+    struct rt_hwcrypto_ctx *ctx;
+    rt_uint32_t result = 0;
+    
+    struct hwcrypto_crc_cfg cfg =
+    {
+        .last_val = 0xFFFFFFFF,
+        .poly     = 0x04C11DB7,
+        .width    = 32,
+        .xorout   = 0x00000000,
+        .flags    = 0,
+    };
+
+    ctx = rt_hwcrypto_crc_create(rt_hwcrypto_dev_default(), HWCRYPTO_CRC_CRC32);
+    rt_hwcrypto_crc_cfg(ctx, &cfg);
+
+    result = rt_hwcrypto_crc_update(ctx, temp, size);
+
+    rt_kprintf("crc result: %x \n", result);                
+
+    rt_hwcrypto_crc_destroy(ctx);  
+}
+#endif
+
+#if defined(BSP_USING_HASH)
+static void hw_hash_sample()
+{
+    int i = 0;
+    struct rt_hwcrypto_ctx *ctx = RT_NULL;
+    const uint8_t hash_input[] = "RT-Thread was born in 2006, it is an open source, neutral, and community-based real-time operating system (RTOS).";
+    
+    static uint8_t sha1_output[20];
+    static uint8_t sha1_except[20] = {0xff, 0x3c, 0x95, 0x54, 0x95, 0xf0, 0xad, 
+                                    0x02, 0x1b, 0xa8, 0xbc, 0xa2, 0x2e, 0xa5,
+                                    0xb0, 0x62, 0x1b, 0xdf, 0x7f, 0xec};
+    
+    static uint8_t md5_output[16];
+    static uint8_t md5_except[16] = {0x40, 0x86, 0x03, 0x80, 0x0d, 0x8c, 0xb9, 
+                                   0x4c, 0xd6, 0x7d, 0x28, 0xfc, 0xf6, 0xc3,
+                                   0xac, 0x8b};
+    
+    static uint8_t sha224_output[28];
+    static uint8_t sha224_except[28] = {0x6f, 0x62, 0x52, 0x7d, 0x80, 0xe6, 
+                                        0x9f, 0x82, 0x78, 0x7a, 0x46, 0x91,
+                                        0xb0, 0xe9, 0x64, 0x89, 0xe6, 0xc3,
+                                        0x6b, 0x7e, 0xcf, 0xca, 0x11, 0x42,
+                                        0xc8, 0x77, 0x13, 0x79};
+    static uint8_t sha256_output[32];
+    static uint8_t sha256_except[32] = {0x74, 0x19, 0xb9, 0x0e, 0xd1, 0x46,
+                                        0x37, 0x0a, 0x55, 0x18, 0x26, 0x6c,
+                                        0x50, 0xd8, 0x71, 0x34, 0xfa, 0x1f,
+                                        0x5f, 0x5f, 0xe4, 0x9a, 0xe9, 0x40,
+                                        0x0a, 0x7d, 0xa0, 0x26, 0x1b, 0x86,
+                                        0x67, 0x45};
+    rt_kprintf("Hash Test start: \n");
+    rt_kprintf("Hash Test string: \n");
+    for (i = 0; i < sizeof(hash_input); i++)
+    {
+        rt_kprintf("%c", hash_input[i]);
+    }
+    rt_kprintf("\n");
+    
+    /* sh1 test*/
+    ctx = rt_hwcrypto_hash_create(rt_hwcrypto_dev_default(), HWCRYPTO_TYPE_SHA1);
+    if (ctx == RT_NULL)
+    {
+        rt_kprintf("create hash[%08x] context err!\n", HWCRYPTO_TYPE_SHA1);
+        return ;
+    }
+    rt_kprintf("Create sha1 type success!\n");
+    rt_kprintf("Except sha1 result: \n");
+    for (i = 0; i < sizeof(sha1_except); i++)
+    {
+        rt_kprintf("%x ", sha1_except[i]);
+    } 
+    rt_kprintf("\n");
+    /* start sha1 */
+    rt_hwcrypto_hash_update(ctx, hash_input, rt_strlen((char const *)hash_input));
+    /* get sha1 result */
+    rt_hwcrypto_hash_finish(ctx, sha1_output, rt_strlen((char const *)sha1_output));
+    
+    rt_kprintf("Actual sha1 result: \n");
+    for (i = 0; i < sizeof(sha1_output); i++)
+    {
+        rt_kprintf("%x ", sha1_output[i]);
+    }
+    rt_kprintf("\n");
+    if(rt_memcmp(sha1_output, sha1_except, sizeof(sha1_except)/sizeof(sha1_except[0])) != 0)
+    {
+        rt_kprintf("Hash type sha1 Test error, The actual result is not equal to the except result\n");
+    }
+    else
+    {
+        rt_kprintf("Hash type sha1 Test success, The actual result is equal to the except result\n");
+    }
+    /* deinit hash*/
+    rt_hwcrypto_hash_destroy(ctx);
+    
+    /* md5 test*/
+    ctx = rt_hwcrypto_hash_create(rt_hwcrypto_dev_default(), HWCRYPTO_TYPE_MD5);
+    if (ctx == RT_NULL)
+    {
+        rt_kprintf("create hash[%08x] context err!\n", HWCRYPTO_TYPE_MD5);
+        return ;
+    }
+    rt_kprintf("Create md5 type success!\n");
+    rt_kprintf("Except md5 result: \n");
+    for (i = 0; i < sizeof(md5_except); i++)
+    {
+        rt_kprintf("%x ", md5_except[i]);
+    } 
+    rt_kprintf("\n");
+    /* start md5 */
+    rt_hwcrypto_hash_update(ctx, hash_input, rt_strlen((char const *)hash_input));
+    /* get md5 result */
+    rt_hwcrypto_hash_finish(ctx, md5_output, rt_strlen((char const *)md5_output));
+    
+    rt_kprintf("Actual md5 result: \n");
+    for (i = 0; i < sizeof(md5_output); i++)
+    {
+        rt_kprintf("%x ", md5_output[i]);
+    }
+    rt_kprintf("\n");
+    if(rt_memcmp(md5_output, md5_except, sizeof(md5_except)/sizeof(md5_except[0])) != 0)
+    {
+        rt_kprintf("Hash type md5 Test error, The actual result is not equal to the except result\n");
+    }
+    else
+    {
+        rt_kprintf("Hash type md5 Test success, The actual result is equal to the except result\n");
+    }
+    /* deinit hash*/
+    rt_hwcrypto_hash_destroy(ctx);
+    
+    /* sha224 test */
+    ctx = rt_hwcrypto_hash_create(rt_hwcrypto_dev_default(), HWCRYPTO_TYPE_SHA224);
+    if (ctx == RT_NULL)
+    {
+        rt_kprintf("create hash[%08x] context err!\n", HWCRYPTO_TYPE_SHA224);
+        return ;
+    }
+    rt_kprintf("Create sha224 type success!\n");
+    rt_kprintf("Except sha224 result: \n");
+    for (i = 0; i < sizeof(sha224_except); i++)
+    {
+        rt_kprintf("%x ", sha224_except[i]);
+    } 
+    rt_kprintf("\n");
+    /* start sha224 */
+    rt_hwcrypto_hash_update(ctx, hash_input, rt_strlen((char const *)hash_input));
+    /* get sha224 result */
+    rt_hwcrypto_hash_finish(ctx, sha224_output, rt_strlen((char const *)sha224_output));
+    
+    rt_kprintf("Actual sha224 result: \n");
+    for (i = 0; i < sizeof(sha224_output); i++)
+    {
+        rt_kprintf("%x ", sha224_output[i]);
+    }
+    rt_kprintf("\n");
+    if(rt_memcmp(sha224_output, sha224_except, sizeof(sha224_except)/sizeof(sha224_except[0])) != 0)
+    {
+        rt_kprintf("Hash type sha224 Test error, The actual result is not equal to the except result\n");
+    }
+    else
+    {
+        rt_kprintf("Hash type sha224 Test success, The actual result is equal to the except result\n");
+    }
+    rt_hwcrypto_hash_destroy(ctx);
+
+    /* sha256 test*/
+    ctx = rt_hwcrypto_hash_create(rt_hwcrypto_dev_default(), HWCRYPTO_TYPE_SHA256);
+    if (ctx == RT_NULL)
+    {
+        rt_kprintf("create hash[%08x] context err!\n", HWCRYPTO_TYPE_SHA256);
+        return ;
+    }
+    
+    rt_kprintf("Create sha256 type success!\n");
+    rt_kprintf("Except sha256 result: \n");
+    for (i = 0; i < sizeof(sha256_except); i++)
+    {
+        rt_kprintf("%x ", sha256_except[i]);
+    } 
+    rt_kprintf("\n");
+    /* start sha256 */
+    rt_hwcrypto_hash_update(ctx, hash_input, rt_strlen((char const *)hash_input));
+    /* get sha256 result */
+    rt_hwcrypto_hash_finish(ctx, sha256_output, rt_strlen((char const *)sha256_output));
+
+    rt_kprintf("Actual sha256 result: \n");
+    for (i = 0; i < sizeof(sha256_output); i++)
+    {
+        rt_kprintf("%x ", sha256_output[i]);
+    }
+    rt_kprintf("\n");
+    
+    if(rt_memcmp(sha256_output, sha256_except, sizeof(sha256_except)/sizeof(sha256_except[0])) != 0)
+    {
+        rt_kprintf("Hash type sha256 Test error, The actual result is not equal to the except result\n");
+    }
+    else
+    {
+        rt_kprintf("Hash type sha256 Test success, The actual result is equal to the except result\n");
+    }
+    rt_hwcrypto_hash_destroy(ctx);
+    rt_kprintf("Hash Test over!\n");    
+}
+#endif
+
+static int crypto(int argc, char **argv)
+{
+    int result = RT_EOK;
+    static rt_device_t device = RT_NULL;
+    char *result_str;
+    
+    if (argc > 1)
+    {
+        if (!strcmp(argv[1], "probe"))
+        {
+            if (argc == 3)
+            {
+                char *dev_name = argv[2];
+                device = rt_device_find(dev_name);
+                result_str = (device == RT_NULL) ? "failure" : "success";
+                rt_kprintf("probe %s %s \n", argv[2], result_str);
+            }
+            else
+            {
+                rt_kprintf("crypto probe <crypto_name>   - probe crypto by name\n");
+            }
+        }
+        else
+        {
+            if (device == RT_NULL)
+            {
+                rt_kprintf("Please using 'crypto probe <crypto_name>' first\n");
+                return -RT_ERROR;
+            }
+            if (!strcmp(argv[1], "rng"))
+            {
+#if defined (BSP_USING_RNG)
+                if (argc == 3)
+                {
+                    result = hw_rng_sample(atoi(argv[2]));
+                    if(result != RT_EOK)
+                    {
+                        rt_kprintf("please input a  legal number, not <%d>\n", atoi(argv[2]));
+                    }
+                }
+                else
+                {
+                    rt_kprintf("rng <number>        - generate <number> digital\n");
+                }
+                
+#else
+                rt_kprintf("please enable RNG first!\n");
+#endif
+            }
+            else if (!strcmp(argv[1], "crc"))
+            {
+#if defined (BSP_USING_CRC)
+                int size = 0, i = 0; 
+                if (argc > 3)
+                {
+                    size = argc - 2;
+                    uint8_t *data = rt_malloc(size);
+                    if (data)
+                    {
+                        for (i = 0; i < size; i++)
+                        {
+                            data[i] = strtol(argv[2 + i], NULL, 0);
+                        }
+                        hw_crc_sample(data, size);  
+                        rt_free(data);
+                    }
+                    else
+                    {
+                        rt_kprintf("Low memory!\n");
+                    }
+                }
+                else
+                {
+                    rt_kprintf("crypto crc data1 ... dataN          - calculate data1 ... dataN crc\n");
+                }
+#else
+                rt_kprintf("please enable CRC first!\n");
+#endif
+            }
+            else if (!strcmp(argv[1], "hash"))
+            {
+#if defined (BSP_USING_HASH)
+                if (argc == 3)
+                {
+                    hw_hash_sample(); 
+                }
+                else
+                {
+                    rt_kprintf("crypto hash sample          - hash use sample\n");    
+                }
+#else
+         rt_kprintf("please enable CRC first!\n");       
+#endif
+                
+            }
+            else
+            {
+                rt_kprintf("Unknown command. Please enter 'crypto' for help\n");
+            }
+        }
+    }
+    else
+    {
+        rt_kprintf("Usage: \n");
+        rt_kprintf("crypto probe <crypto_name>                  - probe crypto by name\n");
+        rt_kprintf("crypto rng number                           - generate numbers digital\n");
+        rt_kprintf("crypto crc data1 ... dataN                  - calculate data1 ... dataN crc\n");
+        rt_kprintf("crypto hash sample                          - hash use sample\n");
+        result = -RT_ERROR;
+    }
+    
+    return result;
+}
+MSH_CMD_EXPORT(crypto, crypto function);