diff options
| author | Alex <[email protected]> | 2015-05-13 08:50:14 +0800 |
|---|---|---|
| committer | Alex <[email protected]> | 2015-05-13 08:50:14 +0800 |
| commit | b25e602afb4cb01974e19edd95ab701c55b3ca53 (patch) | |
| tree | ef17dd58bcafc3bcbc0bdfe4661d1f999d3a4958 | |
| parent | a58078d18aa12446464e7b832bcc4c5d9e5cd34f (diff) | |
fix a eth driver bug to avoid crush
fix a eth driver bug to avoid crush
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h | 16028 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h | 14 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h | 834 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h | 16 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h | 22 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h | 20 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h | 552 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h | 178 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h | 220 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c | 9 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c | 75 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c | 46 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c | 10 | ||||
| -rw-r--r-- | bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c | 17 | ||||
| -rw-r--r-- | bsp/CME_M7/drivers/emac.c | 34 | ||||
| -rw-r--r-- | bsp/CME_M7/project.uvopt | 1527 | ||||
| -rw-r--r-- | bsp/CME_M7/project.uvproj | 309 |
17 files changed, 10672 insertions, 9239 deletions
diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h index 0f2d0cf3c0..83d7476753 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h @@ -1,8014 +1,8014 @@ -
-/****************************************************************************************************//**
- * @file cmem7.h
- *
- * @brief CMSIS Cortex-M3 Peripheral Access Layer Header File for
- * cmem7 from <unknown Vendor>.
- *
- * @version V1.0
- * @date 5. January 2015
- *
- * @note Generated with SVDConv V2.75
- * from CMSIS SVD File 'SVDConv_CME_M7.svd' Version 1.0,
- *******************************************************************************************************/
-
-
-
-/** @addtogroup (null)
- * @{
- */
-
-/** @addtogroup cmem7
- * @{
- */
-
-#ifndef CMEM7_H
-#define CMEM7_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* ------------------------- Interrupt Number Definition ------------------------ */
-
-typedef enum {
-/* ------------------- Cortex-M3 Processor Exceptions Numbers ------------------- */
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation
- and No Match */
- BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
- related Fault */
- UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-/* ---------------------- cmem7 Specific Interrupt Numbers ---------------------- */
- ETH_INT_IRQn = 0, /*!< 0 ETH_INT */
- USB_INT_IRQn = 1, /*!< 1 USB_INT */
- DMA_INT_IRQn = 2, /*!< 2 DMA_INT */
- CAN0_INT_IRQn = 3, /*!< 3 CAN0_INT */
- CAN1_INT_IRQn = 4, /*!< 4 CAN1_INT */
- FP0_INT_IRQn = 5, /*!< 5 FP0_INT */
- FP1_INT_IRQn = 6, /*!< 6 FP1_INT */
- FP2_INT_IRQn = 7, /*!< 7 FP2_INT */
- FP3_INT_IRQn = 8, /*!< 8 FP3_INT */
- FP4_INT_IRQn = 9, /*!< 9 FP4_INT */
- FP5_INT_IRQn = 10, /*!< 10 FP5_INT */
- FP6_INT_IRQn = 11, /*!< 11 FP6_INT */
- FP7_INT_IRQn = 12, /*!< 12 FP7_INT */
- FP8_INT_IRQn = 13, /*!< 13 FP8_INT */
- FP9_INT_IRQn = 14, /*!< 14 FP9_INT */
- FP10_INT_IRQn = 15, /*!< 15 FP10_INT */
- FP11_INT_IRQn = 16, /*!< 16 FP11_INT */
- FP12_INT_IRQn = 17, /*!< 17 FP12_INT */
- FP13_INT_IRQn = 18, /*!< 18 FP13_INT */
- FP14_INT_IRQn = 19, /*!< 19 FP14_INT */
- FP15_INT_IRQn = 20, /*!< 20 FP15_INT */
- UART0_INT_IRQn = 21, /*!< 21 UART0_INT */
- UART1_INT_IRQn = 22, /*!< 22 UART1_INT */
- ADC_INT_IRQn = 23, /*!< 23 ADC_INT */
- GPIO_INT_IRQn = 24, /*!< 24 GPIO_INT */
- SPI1_INT_IRQn = 25, /*!< 25 SPI1_INT */
- I2C1_INT_IRQn = 26, /*!< 26 I2C1_INT */
- SPI0_INT_IRQn = 27, /*!< 27 SPI0_INT */
- I2C0_INT_IRQn = 28, /*!< 28 I2C0_INT */
- RTC_1S_INT_IRQn = 29, /*!< 29 RTC_1S_INT */
- RTC_1MS_INT_IRQn = 30, /*!< 30 RTC_1MS_INT */
- WDG_INT_IRQn = 31, /*!< 31 WDG_INT */
- TIMER_INT_IRQn = 32, /*!< 32 TIMER_INT */
- DDRC_SW_PROC_IRQn = 33, /*!< 33 DDRC_SW_PROC */
- ETH_PMT_INT_IRQn = 34, /*!< 34 ETH_PMT_INT */
- PAD_INT_IRQn = 35, /*!< 35 PAD_INT */
- DDRC_LANE_SYNC_IRQn = 36, /*!< 36 DDRC_LANE_SYNC */
- UART2_INT_IRQn = 37 /*!< 37 UART2_INT */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-
-/* ================================================================================ */
-/* ================ Processor and Core Peripheral Section ================ */
-/* ================================================================================ */
-
-/* ----------------Configuration of the Cortex-M3 Processor and Core Peripherals---------------- */
-#define __CM3_REV 0x0000 /*!< Cortex-M3 Core Revision */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 0 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include <core_cm3.h> /*!< Cortex-M3 processor and core peripherals */
-#include "system_cmem7.h" /*!< cmem7 System */
-
-
-/* ================================================================================ */
-/* ================ Device Specific Peripheral Section ================ */
-/* ================================================================================ */
-
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-/* ------------------- Start of section using anonymous unions ------------------ */
-#if defined(__CC_ARM)
- #pragma push
- #pragma anon_unions
-#elif defined(__ICCARM__)
- #pragma language=extended
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
-/* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning 586
-#else
- #warning Not supported compiler type
-#endif
-
-
-
-/* ================================================================================ */
-/* ================ UART0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief asynchronous serial controller 0 (UART0)
- */
-
-typedef struct { /*!< UART0 Structure */
- __IO uint16_t BAUDRATE; /*!< baudrate Register */
- __I uint16_t RESERVED0;
- __IO uint16_t TX_BUF; /*!< transmit buffer Register */
- __I uint16_t RESERVED1;
- __I uint16_t RX_BUF; /*!< receive buffer Register */
- __I uint16_t RESERVED2;
-
- union {
- __IO uint32_t CTRL; /*!< control Register */
-
- struct {
- __IO uint32_t MODE : 3; /*!< asc mode control */
- __IO uint32_t STOP : 2; /*!< number of stop bits selection */
- __IO uint32_t PARITY : 1; /*!< parity selection */
- __IO uint32_t LOOPBACK : 1; /*!< loopback mode enable bit */
- uint32_t : 1;
- __IO uint32_t RX_EN : 1; /*!< receive enable bit */
- uint32_t : 1;
- __IO uint32_t FIFO_EN : 1; /*!< FIFO enable bit */
- __IO uint32_t CTS : 1; /*!< Clear to send, enable signal to send */
- __IO uint32_t BAUD_MODE : 1; /*!< baudrate generation mode */
- __IO uint32_t RX_THRESHOLD: 5; /*!< receive threshold */
- __IO uint32_t RX_HALF_FULL: 5; /*!< receive fifi half full level */
- } CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_MASK; /*!< interrupt mask register */
-
- struct {
- __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */
- __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */
- __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */
- __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */
- __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */
- __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */
- __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */
- __IO uint32_t PE : 1; /*!< parity error interrupt */
- __IO uint32_t FE : 1; /*!< frame error interrupt */
- __IO uint32_t OE : 1; /*!< overrun error interrupt */
- __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */
- } INT_MASK_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t STATUS; /*!< status register */
-
- struct {
- __IO uint32_t RNE : 1; /*!< receiver FIFO not empty */
- __IO uint32_t TE : 1; /*!< Transmitter FIFO empty */
- __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */
- __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty */
- __IO uint32_t TOE : 1; /*!< time out when the receiver FIFO is empty */
- __IO uint32_t RHF : 1; /*!< receiver FIFO is half full */
- __IO uint32_t TF : 1; /*!< transmitter FIFO is full */
- } STATUS_b; /*!< BitSize */
- };
- __IO uint8_t TIMEOUT; /*!< timeout Register */
- __I uint8_t RESERVED3[3];
-
- union {
- __IO uint32_t TX_RESET; /*!< transmit reset Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable */
- } TX_RESET_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RX_RESET; /*!< receive reset Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable */
- } RX_RESET_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RUN; /*!< uart enable register */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable */
- } RUN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_RAW; /*!< raw interrupt before mask register */
-
- struct {
- __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */
- __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */
- __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */
- __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */
- __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */
- __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */
- __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */
- __IO uint32_t PE : 1; /*!< parity error interrupt */
- __IO uint32_t FE : 1; /*!< frame error interrupt */
- __IO uint32_t OE : 1; /*!< overrun error interrupt */
- __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */
- } INT_RAW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_SEEN; /*!< interrupt after mask register */
-
- struct {
- __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */
- __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */
- __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */
- __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */
- __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */
- __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */
- __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */
- __IO uint32_t PE : 1; /*!< parity error interrupt */
- __IO uint32_t FE : 1; /*!< frame error interrupt */
- __IO uint32_t OE : 1; /*!< overrun error interrupt */
- __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */
- } INT_SEEN_b; /*!< BitSize */
- };
-} UART0_Type;
-
-
-/* ================================================================================ */
-/* ================ WDG ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief watchdog (WDG)
- */
-
-typedef struct { /*!< WDG Structure */
-
- union {
- __IO uint32_t CTRL; /*!< control Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< flag indicates if watchdog is enabled or not */
- __IO uint32_t INT_LEN : 1; /*!< watchdog report interrupt when COUNTER is 1/4 or 1/2 of LENGTH */
- } CTRL_b; /*!< BitSize */
- };
- __IO uint32_t LEN; /*!< Ticks decrease down to 25% or 50% to trigger an interrupt */
-
- union {
- __IO uint32_t INT_CTRL; /*!< interrupt control */
-
- struct {
- __IO uint32_t MASK : 1; /*!< mask register */
- __IO uint32_t TRIGGER_MODE: 1; /*!< trigger mode */
- } INT_CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_STA; /*!< interrupt status register */
-
- struct {
- __IO uint32_t STA : 1; /*!< interrupt status */
- } INT_STA_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_RAW; /*!< interrupt raw register */
-
- struct {
- __IO uint32_t STA : 1; /*!< interrupt status */
- } INT_RAW_b; /*!< BitSize */
- };
- __I uint32_t CNT; /*!< counter register */
-} WDG_Type;
-
-
-/* ================================================================================ */
-/* ================ TIMER0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief timer 0 (TIMER0)
- */
-
-typedef struct { /*!< TIMER0 Structure */
-
- union {
- __IO uint32_t CTRL; /*!< control Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< flag indicates if timer is enabled or not */
- } CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TYPE; /*!< type Register */
-
- struct {
- __IO uint32_t SIGNLE_SHOT: 1; /*!< indicate timer generate only one interrupt if not reload */
- } TYPE_b; /*!< BitSize */
- };
- __IO uint32_t LEN; /*!< length */
-
- union {
- __IO uint32_t INT_EN; /*!< interrupt enable */
-
- struct {
- __IO uint32_t EN_REVERSE : 1; /*!< flag indicates if timer is disable or not */
- } INT_EN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_STA; /*!< interrupt status */
-
- struct {
- __IO uint32_t STA : 1; /*!< interrupt status */
- } INT_STA_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_RAW; /*!< interrupt raw register */
-
- struct {
- __IO uint32_t STA : 1; /*!< interrupt status */
- } INT_RAW_b; /*!< BitSize */
- };
- __I uint32_t CNT; /*!< counter register */
-} TIMER0_Type;
-
-
-/* ================================================================================ */
-/* ================ SPI0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI 0 (SPI0)
- */
-
-typedef struct { /*!< SPI0 Structure */
-
- union {
- __I uint32_t STATUS; /*!< status Register */
-
- struct {
- __I uint32_t RFIFO_EMPTY: 1; /*!< receive fifo is empty */
- __I uint32_t RFIFO_FULL : 1; /*!< receive fifo is full */
- __I uint32_t RFIFO_ALMOST_EMPTY: 1; /*!< receive fifo is almost empty */
- __I uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full */
- __I uint32_t TFIFO_EMPTY: 1; /*!< transmit fifo is empty */
- __I uint32_t TFIFO_FULL : 1; /*!< transmit fifo is full */
- __I uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo is almost empty */
- __I uint32_t TFIFO_ALMOST_FULL: 1; /*!< transmit fifo almost full */
- __I uint32_t BUSY : 1; /*!< indecates if SPI is idle or busy */
- } STATUS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTRL; /*!< control Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< indicates if SPI is enabled or not */
- __IO uint32_t RX_EN : 1; /*!< indicates if SPI receiver is enabled or not */
- __IO uint32_t CLK_HIGH : 1; /*!< indicats if idle clock polarity is high level */
- __IO uint32_t NEG_EDGE : 1; /*!< 1, indicates SPI takes sample at the rise edge and transmit
- data at the trailing edge. 0, conversely. */
- __IO uint32_t TX_BIT_SEQUENCE: 1; /*!< transmit bit sequence. 0 : MSB is sent first */
- __IO uint32_t RX_BIT_SEQUENCE: 1; /*!< receive bit sequence. 0: MSB is received first */
- } CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_MASK; /*!< interrupt mask Register */
-
- struct {
- __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */
- __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */
- __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */
- __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */
- __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */
- __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */
- __IO uint32_t DONE : 1; /*!< transmit done interrupt */
- } INT_MASK_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_STATUS; /*!< interrupt Register */
-
- struct {
- __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */
- __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */
- __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */
- __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */
- __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */
- __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */
- __IO uint32_t DONE : 1; /*!< transmit done interrupt */
- } INT_STATUS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_RAW; /*!< interrupt raw Register */
-
- struct {
- __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */
- __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */
- __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */
- __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */
- __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */
- __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */
- __IO uint32_t DONE : 1; /*!< transmit done interrupt */
- } INT_RAW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t BCNT; /*!< bit length while transmitting and receiving */
-
- struct {
- __IO uint32_t CNT : 5; /*!< bit length while transmitting and receiving, BCNT + 1 */
- } BCNT_b; /*!< BitSize */
- };
- __IO uint8_t GAP; /*!< half cycle number between continuous data frame */
- __I uint8_t RESERVED0[3];
- __IO uint16_t DIV; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */
- __I uint16_t RESERVED1;
- __IO uint32_t TRANS_CNT; /*!< transmit data length, data number = TRANS_CNT + 1 */
-
- union {
- __O uint32_t TRANS_START; /*!< transmit startup register, write 1 to trigger transmision once */
-
- struct {
- __O uint32_t TX_TRIGGER : 1; /*!< write 1 to trigger transmision once */
- } TRANS_START_b; /*!< BitSize */
- };
- __IO uint32_t RW_DATA; /*!< raw data register */
-} SPI0_Type;
-
-
-/* ================================================================================ */
-/* ================ I2C0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief I2C 0 (I2C0)
- */
-
-typedef struct { /*!< I2C0 Structure */
-
- union {
- __IO uint32_t CTRL; /*!< control Register */
-
- struct {
- __IO uint32_t MODE : 1; /*!< master or slave mode */
- __IO uint32_t MASTER_ADDR_WIDTH: 1; /*!< 7- or 10-bits address as a master */
- __IO uint32_t SLAVE_ADDR_WIDTH: 1; /*!< 7- or 10-bits address width as a slave */
- } CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint16_t TAR; /*!< target address Register */
-
- struct {
- __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */
- __IO uint16_t START_BYTE : 1; /*!< Enable start Byte for each transfer */
- } TAR_b; /*!< BitSize */
- };
- __I uint16_t RESERVED0;
-
- union {
- __IO uint16_t SAR; /*!< slave address Register */
-
- struct {
- __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */
- } SAR_b; /*!< BitSize */
- };
- __I uint16_t RESERVED1;
-
- union {
- __IO uint32_t DATA_CMD; /*!< I2C transfer data/command entry */
-
- struct {
- __IO uint32_t DATA : 8; /*!< 8-bits data */
- __O uint32_t RD_CMD : 1; /*!< read command for master mode only, write 0 if slave mode */
- __O uint32_t WR_CMD : 1; /*!< write command for master mode only */
- __O uint32_t WR_RD_CMD : 1; /*!< write and read command for master mode only */
- } DATA_CMD_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t WRITE_READ_CNT; /*!< I2C write and read data byte counter Register */
-
- struct {
- __IO uint32_t RD_BYTE_CNT: 9; /*!< Decide the number of bytes read back as a master-receiver */
- uint32_t : 7;
- __IO uint32_t WR_BYTE_CNT: 9; /*!< Decide the number of byte to send as a master-transmitter */
- } WRITE_READ_CNT_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SCL_CNT; /*!< I2C clk pulse counter */
-
- struct {
- __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< the SCL clock high-period count */
- __IO uint32_t LOW_LEVEL_TICK: 16; /*!< the SCL clock low-period count */
- } SCL_CNT_b; /*!< BitSize */
- };
- __I uint32_t RESERVED2;
-
- union {
- __I uint32_t INT_STATUS; /*!< I2C interrupt sources */
-
- struct {
- __I uint32_t RX_UNDER : 1; /*!< receiver underflow */
- __I uint32_t RX_OVER : 1; /*!< receiver overflow */
- __I uint32_t RX_FULL : 1; /*!< receiver is full */
- __I uint32_t TX_OVER : 1; /*!< transmit overflow */
- __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */
- __I uint32_t RD_REQ : 1; /*!< read request */
- __I uint32_t TX_ABRT : 1; /*!< transmit abortion */
- __I uint32_t RX_DONE : 1; /*!< receive done */
- __I uint32_t TX_DONE : 1; /*!< transmit done */
- __I uint32_t WR_REQ : 1; /*!< write request */
- } INT_STATUS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_MASK; /*!< I2C interrupt mask register */
-
- struct {
- __I uint32_t RX_UNDER : 1; /*!< receiver underflow */
- __I uint32_t RX_OVER : 1; /*!< receiver overflow */
- __I uint32_t RX_FULL : 1; /*!< receiver is full */
- __I uint32_t TX_OVER : 1; /*!< transmit overflow */
- __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */
- __I uint32_t RD_REQ : 1; /*!< read request */
- __I uint32_t TX_ABRT : 1; /*!< transmit abortion */
- __I uint32_t RX_DONE : 1; /*!< receive done */
- __I uint32_t TX_DONE : 1; /*!< transmit done */
- __I uint32_t WR_REQ : 1; /*!< write request */
- } INT_MASK_b; /*!< BitSize */
- };
- __I uint32_t RESERVED3;
-
- union {
- __IO uint32_t RX_TL; /*!< I2C receive FIFO threshold */
-
- struct {
- __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */
- } RX_TL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TX_TL; /*!< I2C transmit FIFO threshold */
-
- struct {
- __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */
- } TX_TL_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_ALL_INT; /*!< I2C clear all interrupt register */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear all individual interrupts */
- } CLR_ALL_INT_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_RX_UNDER; /*!< I2C clear RX_UNDER interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_UNDER interrupt (bit 19)
- of the I2C_STATUS register */
- } CLR_RX_UNDER_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_RX_OVER; /*!< I2C clear RX_OVER interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_OVER interrupt (bit 20) of
- the I2C_STATUS register */
- } CLR_RX_OVER_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_TX_OVER; /*!< I2C clear TX_OVER interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_OVER interrupt (bit 22) of
- the I2C_STATUS register */
- } CLR_TX_OVER_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_RD_REQ; /*!< I2C clear RD_REQ interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the RD_REQ interrupt (bit 24) of
- the I2C_STATUS register */
- } CLR_RD_REQ_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_TX_ABRT; /*!< I2C clear TX_ABRT interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_ABRT interrupts (bit 25 ,
- bit 18, bit 17, bit 16 and bit 15) of the I2C_STATUS register. */
- } CLR_TX_ABRT_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_RX_DONE; /*!< I2C clear RX_DONE interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_DONE interrupt (bit 26) of
- the I2C_STATUS register */
- } CLR_RX_DONE_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ENABLE; /*!< I2C enable register */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable device */
- uint32_t : 30;
- __IO uint32_t RESET : 1; /*!< TX and RX FIFO are held in an erased state( flushed) and all
- interrupts deserted */
- } ENABLE_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t STATUS; /*!< I2C status register */
-
- struct {
- __I uint32_t BUSY : 1; /*!< I2C busy Status */
- __I uint32_t TX_FIFO_NOT_FULL: 1; /*!< transmit FIFO is not full */
- __I uint32_t TX_FIFO_EMPTY: 1; /*!< transmit FIFO is empty */
- __I uint32_t RX_FIFO_NOT_EMPTY: 1; /*!< receive FIFO is not empty */
- __I uint32_t RX_FIFO_FULL: 1; /*!< receive FIFO is full */
- __I uint32_t EN : 1; /*!< I2C is enabled */
- __I uint32_t TX_BYTE_W_ACK: 9; /*!< Number of bytes sent to slave with acknowledge during the last
- write transaction as a master-transmitter only */
- __I uint32_t ABRT_ADDR_NOACK: 1; /*!< the address sent was not acknowledged by any slave as a master */
- __I uint32_t ABRT_TX_DATA_NOACK: 1; /*!< the data sent was not acknowledged by any slave as a master */
- __I uint32_t ABRT_SLAVE_FLUSH_TX_FIFO: 1; /*!< Slave has received a read command and some data exists in the
- TX FIFO so the slave issues a TX_ABRT interrupt to flush old
- data in TX FIFO */
- __I uint32_t ABRT_SLAVE_RD_IN_TX: 1; /*!< When the processor side responds to a slave mode request for
- data to be transmitted to a remote master and user writes a
- 1 in CMD (bit 8) of I2C_DATA_CMD register */
- __I uint32_t RX_UNDER : 1; /*!< receiver is underflow */
- __I uint32_t RX_OVER : 1; /*!< receiver is overflow */
- __I uint32_t RX_FULL : 1; /*!< receiver is full */
- __I uint32_t TX_OVER : 1; /*!< transmit is overflow */
- __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */
- __I uint32_t RD_REQ : 1; /*!< read request is received */
- __I uint32_t TX_ABRT : 1; /*!< transmit is abort */
- __I uint32_t RX_DONE : 1; /*!< receive is done */
- __I uint32_t TX_DONE : 1; /*!< transmit is done */
- __I uint32_t WR_REQ : 1; /*!< write request is received */
- __I uint32_t MST_RD_FLAG: 1; /*!< Master is executing read command */
- __I uint32_t MST_WR_FLAG: 1; /*!< Master is executing read command */
- __I uint32_t MST_WR_RD_FLAG: 1; /*!< Master is executing write-read command */
- } STATUS_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t TX_FIFO_LEVEL; /*!< I2C transmit FIFO level */
-
- struct {
- __I uint32_t LEVEL : 5; /*!< FIFO level */
- } TX_FIFO_LEVEL_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t RX_FIFO_LEVEL; /*!< I2C receive FIFO level */
-
- struct {
- __I uint32_t LEVEL : 5; /*!< FIFO level */
- } RX_FIFO_LEVEL_b; /*!< BitSize */
- };
- __I uint32_t RESERVED4;
-
- union {
- __O uint32_t SLAVE_NACK; /*!< I2C slave send a data NACK */
-
- struct {
- __O uint32_t NACK : 1; /*!< data NACK */
- } SLAVE_NACK_b; /*!< BitSize */
- };
- __I uint32_t RESERVED5;
-
- union {
- __IO uint32_t SDA_SETUP; /*!< I2C SDA setup timer */
-
- struct {
- __IO uint32_t TSETUP : 10; /*!< This counter defines the max value of the following constrains:THD:STA
- TSU:STO,TSETUP: T / INPUT_CLK_PERIOD */
- __IO uint32_t TSU_DAT : 8; /*!< This counter defines the constrain of TSU:DAT: 250ns (or 100ns)
- / INPUT_CLK_PERIOD */
- } SDA_SETUP_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TSU_STA_SETUP; /*!< I2C Tsu_sta and Tbuf_free timer */
-
- struct {
- __IO uint32_t TBUF : 10; /*!< This counter defines the constrain of bus free interval: Tbuf,
- Tbuf : Tbus_free / INPUT_CLK_PERIOD */
- __IO uint32_t TSU_STA : 10; /*!< This counter defines the constrain of Tsu:sta, Tsu:sta : Tsu:sta
- / INPUT_CLK_PERIOD */
- __IO uint32_t SDA_FILTER_CNT: 4; /*!< SDA filter count */
- __IO uint32_t SDA_FILTER_EN: 1; /*!< SDA filter enable bit */
- __IO uint32_t SCL_FILTER_CNT: 4; /*!< SCL filter count */
- __IO uint32_t SCL_FILTER_EN: 1; /*!< SCL filter enable bit */
- } TSU_STA_SETUP_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CLR_TX_DONE; /*!< I2C clear TX_DONE interrupt */
-
- struct {
- __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_DONE interrupt (bit 27) of
- the I2C_STATUS register */
- } CLR_TX_DONE_b; /*!< BitSize */
- };
-} I2C0_Type;
-
-
-/* ================================================================================ */
-/* ================ RTC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief RTC (RTC)
- */
-
-typedef struct { /*!< RTC Structure */
-
- union {
- __IO uint32_t INT_STATUS; /*!< interrupt Register */
-
- struct {
- __IO uint32_t SECOND : 1; /*!< 1s interrupt, write 1 clear 0 */
- __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt, write 1 clear 0 */
- } INT_STATUS_b; /*!< BitSize */
- };
- __IO uint32_t SECOND; /*!< current seconds of system time */
-
- union {
- __IO uint16_t MILLSECOND; /*!< current millseconds of system time */
-
- struct {
- __IO uint16_t MS : 10; /*!< micro seconds */
- } MILLSECOND_b; /*!< BitSize */
- };
-} RTC_Type;
-
-
-/* ================================================================================ */
-/* ================ GPIO ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief GPIO (GPIO)
- */
-
-typedef struct { /*!< GPIO Structure */
- __I uint32_t GPIO_IN; /*!< GPIO input data */
- __IO uint32_t GPIO_OUT_UNMASK; /*!< GPIO output mask Register */
- __IO uint32_t GPIO_OUT_DATA; /*!< GPIO output data register */
- __IO uint32_t GPIO_OE; /*!< GPIO output driver enable */
- __IO uint32_t GPIO_INT_MASK; /*!< GPIO input interrupt mask */
- __IO uint32_t GPIO_INT_STATUS; /*!< GPIO input interrupt status */
- __IO uint32_t GPIO_INT_RAW; /*!< GPIO input interrupt raw */
- __IO uint32_t GPIO_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */
-
- union {
- __IO uint32_t PWM_OUT_SEL; /*!< Select gpio output from PWM */
-
- struct {
- __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */
- __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */
- __IO uint32_t GPIO_H_19 : 1; /*!< GPIO_H[19] is selected to output PWM */
- __IO uint32_t GPIO_H_20 : 1; /*!< GPIO_H[20] is selected to output PWM */
- } PWM_OUT_SEL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PWM_OUT0_LEN; /*!< Pwm channel 0 paramters */
-
- struct {
- __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */
- __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */
- } PWM_OUT0_LEN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PWM_OUT1_LEN; /*!< Pwm channel 1 paramters */
-
- struct {
- __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */
- __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */
- } PWM_OUT1_LEN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PWM_OUT2_LEN; /*!< Pwm channel 2 paramters */
-
- struct {
- __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */
- __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */
- } PWM_OUT2_LEN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PWM_OUT3_LEN; /*!< Pwm channel 3 paramters */
-
- struct {
- __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */
- __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */
- } PWM_OUT3_LEN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PWM_OUT_EN; /*!< Pwm enable */
-
- struct {
- __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */
- __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */
- __IO uint32_t GPIO_H_19 : 1; /*!< GPIO_H[19] is selected to output PWM */
- __IO uint32_t GPIO_H_20 : 1; /*!< GPIO_H[20] is selected to output PWM */
- } PWM_OUT_EN_b; /*!< BitSize */
- };
- __I uint32_t GPIO_H_IN; /*!< GPIO_H input data */
- __IO uint32_t GPIO_H_OUT_UNMASK; /*!< GPIO_H output unmask Register */
- __IO uint32_t GPIO_H_OUT_DATA; /*!< GPIO_H output data register */
- __IO uint32_t GPIO_H_OE; /*!< GPIO_H output driver enable */
- __IO uint32_t GPIO_H_INT_MASK; /*!< GPIO_H interrupt mask */
- __IO uint32_t GPIO_H_INT_STATUS; /*!< GPIO_H interrupt status */
- __IO uint32_t GPIO_H_INT_RAW; /*!< GPIO_H interrupt raw */
- __IO uint32_t GPIO_H_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */
- __I uint32_t GPIO_N_IN; /*!< GPIO_N input data */
- __IO uint32_t GPIO_N_OUT_UNMASK; /*!< GPIO_N output unmask Register */
- __IO uint32_t GPIO_N_OUT_DATA; /*!< GPIO_N output data register */
- __IO uint32_t GPIO_N_OE; /*!< GPIO_N output driver enable */
- __IO uint32_t GPIO_N_INT_MASK; /*!< GPIO_N interrupt mask */
- __IO uint32_t GPIO_N_INT_STATUS; /*!< GPIO_N interrupt status */
- __IO uint32_t GPIO_N_INT_RAW; /*!< GPIO_N interrupt raw */
- __IO uint32_t GPIO_N_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */
-} GPIO_Type;
-
-
-/* ================================================================================ */
-/* ================ NOR_FLASH ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief NOR_FLASH (NOR_FLASH)
- */
-
-typedef struct { /*!< NOR_FLASH Structure */
-
- union {
- __IO uint32_t CTRL0; /*!< control Register 0 */
-
- struct {
- __IO uint32_t DIV : 8; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */
- __IO uint32_t CS_REVALID_INTERVAL: 8; /*!< interval from CS invalid to valid, number of half cycle of SCK */
- __IO uint32_t RW_BYTE_CNT: 16; /*!< RW byte count (eliminate CMD, ADDRESS, DUMMY in normal state,
- contains all in transparent state. 0 is unlimited */
- } CTRL0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTRL1; /*!< control Register 1 */
-
- struct {
- __IO uint32_t CMD : 8; /*!< operated command */
- __IO uint32_t ADDRESS : 24; /*!< RW address */
- } CTRL1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TRIGGER; /*!< trigger register */
-
- struct {
- __O uint32_t OP_START : 1; /*!< operation start. */
- __IO uint32_t OP_CLEAN : 1; /*!< operation clean, stop current opration and clean FIFO */
- __IO uint32_t TRSP_RD_EN : 1; /*!< if a read operation after transparent operation */
- __IO uint32_t TRSP_EN : 1; /*!< enable transparent operation */
- } TRIGGER_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t STATUS; /*!< status register */
-
- struct {
- __I uint32_t BUSY : 1; /*!< reading or writting */
- __I uint32_t RD_FIFO_ALMOST_FULL: 1; /*!< read FIFO is almost full */
- __I uint32_t RD_FIFO_EMPTY: 1; /*!< read FIFO is empty */
- __I uint32_t RD_FIFO_FULL: 1; /*!< read FIFO is full */
- __I uint32_t WR_FIFO_ALMOST_EMPTY: 1; /*!< write FIFO is almost empty */
- __I uint32_t WR_FIFO_FULL: 1; /*!< write FIFO is full */
- __I uint32_t WR_FIFO_EMPTY: 1; /*!< write FIFO is empty */
- } STATUS_b; /*!< BitSize */
- };
- __IO uint32_t DATA; /*!< data register. lower bits are significant in read and higher
- bits are significant in writting */
-
- union {
- __IO uint32_t BYPASS; /*!< bypass Register, is used for JTAG connecting FLASH directly */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable bypass */
- } BYPASS_b; /*!< BitSize */
- };
-} NOR_FLASH_Type;
-
-
-/* ================================================================================ */
-/* ================ ADC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief ADC (ADC)
- */
-
-typedef struct { /*!< ADC Structure */
-
- union {
- __IO uint32_t POWERDOWN_RESET; /*!< power down and reset Register */
-
- struct {
- __IO uint32_t RESET_ADC2 : 1; /*!< ADC2, reset, active high */
- __IO uint32_t RESET_ADC1 : 1; /*!< ADC1, reset, active high */
- __IO uint32_t POWERDOWN_ADC2: 1; /*!< ADC2, power down, active high */
- __IO uint32_t POWERDOWN_ADC1: 1; /*!< ADC1, power down, active high */
- } POWERDOWN_RESET_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG0; /*!< config Register */
-
- struct {
- __IO uint32_t VSEN : 3; /*!< ADC-1 VSEN Selection */
- __IO uint32_t PHASE_CTRL : 2; /*!< ADC-1 and ADC-2 CLK Phase Control */
- } CFG0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_ADC1; /*!< config ADC1 register */
-
- struct {
- __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */
- __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */
- __IO uint32_t MULTI_CHANNEL_CONTINUE_SCAN: 1;/*!< If continue to scan multiply channel, else single scan */
- __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */
- } CFG_ADC1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_ADC2; /*!< config ADC1 register */
-
- struct {
- __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */
- __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */
- __IO uint32_t MULTI_CHANNEL_CONTINUE_SCAN: 1;/*!< If continue to scan multiply channel, else single scan */
- __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */
- } CFG_ADC2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ADC1_FIFO_CLEAR; /*!< clear adc1 fifo data */
-
- struct {
- __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */
- } ADC1_FIFO_CLEAR_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ADC2_FIFO_CLEAR; /*!< clear adc2 fifo data */
-
- struct {
- __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */
- } ADC2_FIFO_CLEAR_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ALL_ADC_FIFO_CLEAR; /*!< clear adc1 and adc2 fifo data */
-
- struct {
- __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */
- } ALL_ADC_FIFO_CLEAR_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_MASK; /*!< interrupt mask register */
-
- struct {
- __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */
- __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */
- __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */
- __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */
- __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */
- __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */
- } INT_MASK_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_RAW; /*!< interrupt raw register */
-
- struct {
- __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */
- __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */
- __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */
- __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */
- __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */
- __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */
- } INT_RAW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_STATUS; /*!< interrupt status register */
-
- struct {
- __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */
- __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */
- __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */
- __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */
- __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */
- __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */
- } INT_STATUS_b; /*!< BitSize */
- };
- __I uint32_t ADC1_OUT; /*!< ADC-1 Output data (Signed-Magnitude Format) */
- __I uint32_t ADC2_OUT; /*!< ADC-2 Output data (Signed-Magnitude Format) */
- __I uint32_t ADC1_OUT_OFFSET_CALIBRATION; /*!< ADC-1 Output in offset calibration when Input=0, Ideally DAO[11:0]=000h */
- __I uint32_t ADC2_OUT_OFFSET_CALIBRATION; /*!< ADC-2 Output in offset calibration when Input=0, Ideally DAO[11:0]=000h */
- __I uint32_t ADC1_OUT_NEGTIVE_GAIN_CALIBRATION; /*!< ADC-1 Output in gain calibration when Input=-FS, Ideally DAO[11:0]=801h */
- __I uint32_t ADC2_OUT_NEGTIVE_GAIN_CALIBRATION; /*!< ADC-2 Output in gain calibration when Input=-FS, Ideally DAO[11:0]=801h */
- __I uint32_t ADC1_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-1 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */
- __I uint32_t ADC2_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-2 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */
-
- union {
- __I uint32_t EOC; /*!< Conversion End Indicator */
-
- struct {
- __I uint32_t ADC2_EOC_GAIN: 1; /*!< ADC2 EOC_GAIN signal, conversion is done */
- __I uint32_t ADC2_EOC_OFF: 1; /*!< ADC2 EOC_OFF signal, conversion is done */
- __I uint32_t ADC2_EOC : 1; /*!< ADC2 EOC signal, conversion is done */
- __I uint32_t ADC1_EOC_GAIN: 1; /*!< ADC1 EOC_GAIN signal, conversion is done */
- __I uint32_t ADC1_EOC_OFF: 1; /*!< ADC1 EOC_OFF signal, conversion is done */
- __I uint32_t ADC1_EOC : 1; /*!< ADC1 EOC signal, conversion is done */
- } EOC_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t BUSY; /*!< ADC is busy */
-
- struct {
- __I uint32_t ADC1_BUSY : 1; /*!< ADC1 is busy */
- __I uint32_t ADC2_BUSY : 1; /*!< ADC2 is busy */
- } BUSY_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ADC1_START; /*!< ADC1 startup enable */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ADC1_START_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ADC1_STOP; /*!< ADC1 stop enable */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ADC1_STOP_b; /*!< BitSize */
- };
-
- union {
- __O uint16_t ADC1_FIFO_READ; /*!< ADC1 FIFO read data */
-
- struct {
- __O uint16_t DATA : 12; /*!< data */
- __O uint16_t CHANNEL : 4; /*!< channel number */
- } ADC1_FIFO_READ_b; /*!< BitSize */
- };
- __I uint16_t RESERVED0;
-
- union {
- __O uint32_t ADC2_START; /*!< ADC2 startup enable, only for single-conversion */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ADC2_START_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ADC2_STOP; /*!< ADC1 stop enable, only for single-conversion */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ADC2_STOP_b; /*!< BitSize */
- };
-
- union {
- __O uint16_t ADC2_FIFO_READ; /*!< ADC2 FIFO read data */
-
- struct {
- __O uint16_t DATA : 12; /*!< data */
- __O uint16_t CHANNEL : 4; /*!< channel number */
- } ADC2_FIFO_READ_b; /*!< BitSize */
- };
- __I uint16_t RESERVED1;
-
- union {
- __O uint32_t ALL_ADC_START; /*!< all ADCs start */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ALL_ADC_START_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ALL_ADC_STOP; /*!< all ADCs stop */
-
- struct {
- __O uint32_t EN : 1; /*!< start */
- } ALL_ADC_STOP_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t ALL_ADC_FIFO_READ; /*!< all ADCs FIFO read data */
-
- struct {
- __I uint32_t ADC1_DATA : 12; /*!< ADC1 data */
- __I uint32_t ADC1_CHANNEL: 4; /*!< ADC1 channel number */
- __I uint32_t ADC2_DATA : 12; /*!< ADC2 data */
- __I uint32_t ADC2_CHANNEL: 4; /*!< ADC2 channel number */
- } ALL_ADC_FIFO_READ_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t STATUS; /*!< status register */
-
- struct {
- __I uint32_t ADC1_READ_EMPTY: 1; /*!< ADC1 read empty */
- __I uint32_t ADC2_READ_EMPTY: 1; /*!< ADC2 read empty */
- __I uint32_t ADC1_READ_ALMOST_EMPTY: 1; /*!< ADC1 read almost empty */
- __I uint32_t ADC2_READ_ALMOST_EMPTY: 1; /*!< ADC2 read almost empty */
- __I uint32_t ADC1_WRITE_FULL: 1; /*!< ADC1 write full */
- __I uint32_t ADC2_WRITE_FULL: 1; /*!< ADC2 write full */
- __I uint32_t ADC1_WRITE_ALMOST_FULL: 1; /*!< ADC1 write almost full */
- __I uint32_t ADC2_WRITE_ALMOST_FULL: 1; /*!< ADC2 write almost full */
- } STATUS_b; /*!< BitSize */
- };
-} ADC_Type;
-
-
-/* ================================================================================ */
-/* ================ EFUSE ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief EFUSE (EFUSE)
- */
-
-typedef struct { /*!< EFUSE Structure */
-
- union {
- __IO uint32_t USER_CTRL_LOW; /*!< low user region control */
-
- struct {
- __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */
- __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */
- __I uint32_t BUSY : 1; /*!< reading or writting */
- __IO uint32_t COMPARE_FAIL: 1; /*!< data read isn't consist with EFUSE */
- __I uint32_t RD_CRC_ERR : 1; /*!< CRC error in reading */
- __I uint32_t WR_CRC_ERR : 1; /*!< CRC error in writting */
- __I uint32_t LOCK : 1; /*!< user region in EFUSE is locked, EFUSE can't be burn */
- __IO uint32_t TMRF : 2; /*!< Reference resistor select, 1200ohm is recommended */
- } USER_CTRL_LOW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TIMING_0; /*!< timing 0 */
-
- struct {
- __IO uint32_t TPRS : 7; /*!< TPRS */
- __IO uint32_t TESR : 2; /*!< TESR */
- __IO uint32_t TRC : 4; /*!< TRC */
- __IO uint32_t TRPW : 3; /*!< TRPW */
- __IO uint32_t TRAH : 2; /*!< TRAH */
- __IO uint32_t TRAC : 3; /*!< TRAC */
- uint32_t : 6;
- __IO uint32_t TPWPH : 5; /*!< TPWPH[6:2] */
- } TIMING_0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TIMING_1; /*!< timing 1 */
-
- struct {
- __IO uint32_t TPWPS : 7; /*!< TPWPS */
- __IO uint32_t TEPS : 4; /*!< TEPS */
- __IO uint32_t TPP : 11; /*!< TPP */
- __IO uint32_t TPIT : 8; /*!< TPIT */
- __IO uint32_t TPWPH : 2; /*!< TPWPS[1:0] */
- } TIMING_1_b; /*!< BitSize */
- };
- __IO uint32_t USER_DATA0_LOW; /*!< user data [31:0] */
- __IO uint32_t USER_DATA1_LOW; /*!< user data [63:32] */
- __IO uint32_t USER_DATA2_LOW; /*!< user data [95:64] */
- __IO uint32_t USER_DATA3_LOW; /*!< user data [127:96] */
-
- union {
- __IO uint32_t USER_DATA4_LOW; /*!< crc and lock bit */
-
- struct {
- __IO uint32_t LOCK : 1; /*!< write protection if true */
- uint32_t : 23;
- __IO uint32_t CRC : 8; /*!< CRC */
- } USER_DATA4_LOW_b; /*!< BitSize */
- };
- __I uint32_t RESERVED0[3];
-
- union {
- __IO uint32_t USER_CTRL_HI; /*!< high user region control */
-
- struct {
- __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */
- __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */
- __I uint32_t BUSY : 1; /*!< reading or writting */
- __IO uint32_t COMPARE_FAIL: 1; /*!< data read isn't consist with EFUSE */
- __I uint32_t RD_CRC_ERR : 1; /*!< CRC error in reading */
- __I uint32_t WR_CRC_ERR : 1; /*!< CRC error in writting */
- __I uint32_t LOCK : 1; /*!< user region in EFUSE is locked, EFUSE can't be burn */
- __IO uint32_t TMRF : 2; /*!< Reference resistor select, 1200ohm is recommended */
- } USER_CTRL_HI_b; /*!< BitSize */
- };
- __IO uint32_t USER_DATA0_HI; /*!< user data [159:128] */
- __IO uint32_t USER_DATA1_HI; /*!< user data [191:160] */
- __IO uint32_t USER_DATA2_HI; /*!< user data [223:192] */
- __IO uint32_t USER_DATA3_HI; /*!< user data [255:224] */
-
- union {
- __IO uint32_t USER_DATA4_HI; /*!< crc and lock bit */
-
- struct {
- __IO uint32_t LOCK : 1; /*!< write protection if true */
- uint32_t : 23;
- __IO uint32_t CRC : 8; /*!< CRC */
- } USER_DATA4_HI_b; /*!< BitSize */
- };
-} EFUSE_Type;
-
-
-/* ================================================================================ */
-/* ================ CAN0 ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief CAN 0 (CAN0)
- */
-
-typedef struct { /*!< CAN0 Structure */
-
- union {
- __IO uint8_t MODE; /*!< mode Register */
-
- struct {
- __IO uint8_t RM : 1; /*!< reset mode if 1 or operation mode */
- __IO uint8_t LOM : 1; /*!< Listen only mode */
- __IO uint8_t STM : 1; /*!< self test mode */
- __IO uint8_t AFM : 1; /*!< acceptance filter mode. Single filter if 1, dual filter if 0 */
- __IO uint8_t SM : 1; /*!< sleep mode */
- } MODE_b; /*!< BitSize */
- };
- __I uint8_t RESERVED0[3];
-
- union {
- __O uint8_t CMD; /*!< command Register */
-
- struct {
- __O uint8_t TR : 1; /*!< Set to 1 when a message is to be transmitted */
- __O uint8_t AT : 1; /*!< Set to 1 to cancel the next transmission request */
- __O uint8_t RRB : 1; /*!< Set to 1 to release the Receive Buffer */
- __O uint8_t CDO : 1; /*!< Set to 1 to clear the data overrun condition signaled by the
- Data Overrun Status bit (SR.1). */
- __O uint8_t SSR : 1; /*!< Set to 1 when a message is to be transmitted and received simultaneously */
- } CMD_b; /*!< BitSize */
- };
- __I uint8_t RESERVED1[3];
-
- union {
- __I uint8_t STATUS; /*!< status Register */
-
- struct {
- __I uint8_t RBNE : 1; /*!< Receive Buffer not empty */
- __I uint8_t DO : 1; /*!< Data Overrun Status */
- __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */
- __I uint8_t TC : 1; /*!< Transmission complete */
- __I uint8_t RXING : 1; /*!< receiving the data */
- __I uint8_t TXING : 1; /*!< transmitting the data */
- __I uint8_t ERR : 1; /*!< At least one of the error counters is more than Error Warning
- Limit Register */
- __I uint8_t BUS_OFF : 1; /*!< in 'Bus Off' state */
- } STATUS_b; /*!< BitSize */
- };
- __I uint8_t RESERVED2[3];
-
- union {
- __I uint8_t INT; /*!< interrupt Register */
-
- struct {
- __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */
- __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */
- __I uint8_t ERR : 1; /*!< Set on every change (set or clear) of either the Bus Status
- or Error Status bits (SR.7,SR.6) */
- __I uint8_t DO : 1; /*!< Data Overrun Status */
- __I uint8_t WAKEUP : 1; /*!< wake-up */
- __I uint8_t EP : 1; /*!< Set when the MCAN2 re-enters error active state after being
- in error passive state or when at least one error counter exceeds
- the protocol-defined level of 127 */
- __I uint8_t AL : 1; /*!< Set when the MCAN2 loses arbitration and becomes a receiver */
- __I uint8_t BUS_ERR : 1; /*!< Set when the MCAN2 detects an error on the CAN-bus */
- } INT_b; /*!< BitSize */
- };
- __I uint8_t RESERVED3[3];
-
- union {
- __IO uint8_t INT_EN; /*!< interrupt enabled Register */
-
- struct {
- __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */
- __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */
- __I uint8_t ERR : 1; /*!< Set on every change (set or clear) of either the Bus Status
- or Error Status bits (SR.7,SR.6) */
- __I uint8_t DO : 1; /*!< Data Overrun Status */
- __I uint8_t WAKEUP : 1; /*!< wake-up */
- __I uint8_t EP : 1; /*!< Set when the MCAN2 re-enters error active state after being
- in error passive state or when at least one error counter exceeds
- the protocol-defined level of 127 */
- __I uint8_t AL : 1; /*!< Set when the MCAN2 loses arbitration and becomes a receiver */
- __I uint8_t BUS_ERR : 1; /*!< Set when the MCAN2 detects an error on the CAN-bus */
- } INT_EN_b; /*!< BitSize */
- };
- __I uint8_t RESERVED4[7];
-
- union {
- __IO uint8_t BTR0; /*!< Bus Timing 0 */
-
- struct {
- __IO uint8_t BRP : 6; /*!< TQ =2 x Txtal1 x (32 x BRP.5 + 16 x BRP.4 + 8 x BRP.3 + 4 x
- BRP.2 + 2 x BRP.1 + BRP.0 + 1) */
- __IO uint8_t SJW : 2; /*!< the maximum number of time quanta of sync segment */
- } BTR0_b; /*!< BitSize */
- };
- __I uint8_t RESERVED5[3];
-
- union {
- __IO uint8_t BTR1; /*!< Bus Timing 1 */
-
- struct {
- __IO uint8_t TSEG1 : 4; /*!< the maximum number of time quanta of propagation and 1st phase
- segment */
- __IO uint8_t TSEG2 : 3; /*!< the maximum number of time quanta of 2nd phase segment */
- __IO uint8_t SAM : 1; /*!< sample times. Sample 3 times if 1, once if 0 */
- } BTR1_b; /*!< BitSize */
- };
- __I uint8_t RESERVED6[3];
-
- union {
- __IO uint8_t OCR; /*!< Output Control Register */
-
- struct {
- __IO uint8_t MODE : 2; /*!< output control mode */
- } OCR_b; /*!< BitSize */
- };
- __I uint8_t RESERVED7[11];
-
- union {
- __I uint8_t ALC; /*!< Arbitration Lost Capture */
-
- struct {
- __I uint8_t BIT : 5; /*!< the current position of the Bit Processor when bus arbitration
- lost, 1st bit (ID.28) if 0 */
- } ALC_b; /*!< BitSize */
- };
- __I uint8_t RESERVED8[3];
-
- union {
- __I uint8_t ECC; /*!< Error Code Capture */
-
- struct {
- __I uint8_t SEGMENT : 5; /*!< segment code */
- __I uint8_t DIRECTION : 1; /*!< If 1, the error occurred during reception. If 0, the error occurred
- during transmission */
- __I uint8_t ERR : 2; /*!< error code */
- } ECC_b; /*!< BitSize */
- };
- __I uint8_t RESERVED9[3];
- __IO uint8_t EWLR; /*!< Error Warning Limit */
- __I uint8_t RESERVED10[3];
- __IO uint8_t RXERR; /*!< Receive Error Counter */
- __I uint8_t RESERVED11[3];
- __IO uint8_t TXERR; /*!< Transmit Error Counter */
- __I uint8_t RESERVED12[3];
-
- union {
- __IO uint8_t FI_OR_ACR0; /*!< Transmit Frame Information if writting or Receive Frame Information
- if reading, ACR[0] if reset mode */
-
- struct {
- __IO uint8_t DLC : 4; /*!< byte number in the data */
- uint8_t : 2;
- __IO uint8_t RTR : 1; /*!< 1 indicates a remote frame; 0 indicates a data frame */
- __IO uint8_t FF : 1; /*!< 1 selects Extended Frame Format (EFF); 0 selects Standard Frame
- Format (SFF) */
- } FI_OR_ACR0_b; /*!< BitSize */
- };
- __I uint8_t RESERVED13[3];
- __IO uint8_t DI0_OR_ACR1; /*!< Transmit data Information if writting or Receive data Information
- if reading, ACR[1] if reset mode */
- __I uint8_t RESERVED14[3];
- __IO uint8_t DI1_OR_ACR2; /*!< Transmit data Information if writting or Receive data Information
- if reading, ACR[2] if reset mode */
- __I uint8_t RESERVED15[3];
- __IO uint8_t DI2_OR_ACR3; /*!< Transmit data Information if writting or Receive data Information
- if reading, ACR[3] if reset mode */
- __I uint8_t RESERVED16[3];
- __IO uint8_t DI3_OR_AMR0; /*!< Transmit data Information if writting or Receive data Information
- if reading, AMR[0] if reset mode */
- __I uint8_t RESERVED17[3];
- __IO uint8_t DI4_OR_AMR1; /*!< Transmit data Information if writting or Receive data Information
- if reading, AMR[1] if reset mode */
- __I uint8_t RESERVED18[3];
- __IO uint8_t DI5_OR_AMR2; /*!< Transmit data Information if writting or Receive data Information
- if reading, AMR[2] if reset mode */
- __I uint8_t RESERVED19[3];
- __IO uint8_t DI6_OR_AMR3; /*!< Transmit data Information if writting or Receive data Information
- if reading, AMR[3] if reset mode */
- __I uint8_t RESERVED20[3];
- __IO uint8_t DI7; /*!< Transmit data Information if writting or Receive data Information
- if reading */
- __I uint8_t RESERVED21[3];
- __IO uint8_t DI8; /*!< Transmit data Information if writting or Receive data Information
- if reading */
- __I uint8_t RESERVED22[3];
- __IO uint8_t DI9; /*!< Transmit data Information if writting or Receive data Information
- if reading */
- __I uint8_t RESERVED23[3];
- __IO uint8_t DI10; /*!< Transmit data Information if writting or Receive data Information
- if reading */
- __I uint8_t RESERVED24[3];
- __IO uint8_t DI11; /*!< Transmit data Information if writting or Receive data Information
- if reading */
- __I uint8_t RESERVED25[3];
- __IO uint8_t RMC; /*!< Receive Message Counter */
- __I uint8_t RESERVED26[7];
-
- union {
- __IO uint8_t CDR; /*!< Clock Divider Register */
-
- struct {
- __IO uint8_t DIVIDER : 3; /*!< divider of XTAL1 */
- __IO uint8_t OFF : 1; /*!< disable XTAL1 */
- } CDR_b; /*!< BitSize */
- };
-} CAN0_Type;
-
-
-/* ================================================================================ */
-/* ================ DMA ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief DMA (DMA)
- */
-
-typedef struct { /*!< DMA Structure */
- __IO uint32_t SAR0; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED0;
- __IO uint32_t DAR0; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED1;
-
- union {
- __IO uint32_t LLP0; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED2;
-
- union {
- __IO uint32_t CTL_LOW0; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI0; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI0_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT0; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED3;
- __IO uint32_t DSTAT0; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED4;
- __IO uint32_t SSTATAR0; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED5;
- __IO uint32_t DSTATAR0; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED6;
-
- union {
- __IO uint32_t CFG_LOW0; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI0; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR0; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED7;
-
- union {
- __IO uint32_t DSR0; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED8;
- __IO uint32_t SAR1; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED9;
- __IO uint32_t DAR1; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED10;
-
- union {
- __IO uint32_t LLP1; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED11;
-
- union {
- __IO uint32_t CTL_LOW1; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI1; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI1_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT1; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED12;
- __IO uint32_t DSTAT1; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED13;
- __IO uint32_t SSTATAR1; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED14;
- __IO uint32_t DSTATAR1; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED15;
-
- union {
- __IO uint32_t CFG_LOW1; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI1; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR1; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED16;
-
- union {
- __IO uint32_t DSR1; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED17;
- __IO uint32_t SAR2; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED18;
- __IO uint32_t DAR2; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED19;
-
- union {
- __IO uint32_t LLP2; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED20;
-
- union {
- __IO uint32_t CTL_LOW2; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI2; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI2_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT2; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED21;
- __IO uint32_t DSTAT2; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED22;
- __IO uint32_t SSTATAR2; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED23;
- __IO uint32_t DSTATAR2; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED24;
-
- union {
- __IO uint32_t CFG_LOW2; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI2; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR2; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED25;
-
- union {
- __IO uint32_t DSR2; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED26;
- __IO uint32_t SAR3; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED27;
- __IO uint32_t DAR3; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED28;
-
- union {
- __IO uint32_t LLP3; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED29;
-
- union {
- __IO uint32_t CTL_LOW3; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI3; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI3_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT3; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED30;
- __IO uint32_t DSTAT3; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED31;
- __IO uint32_t SSTATAR3; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED32;
- __IO uint32_t DSTATAR3; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED33;
-
- union {
- __IO uint32_t CFG_LOW3; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI3; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR3; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED34;
-
- union {
- __IO uint32_t DSR3; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED35;
- __IO uint32_t SAR4; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED36;
- __IO uint32_t DAR4; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED37;
-
- union {
- __IO uint32_t LLP4; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED38;
-
- union {
- __IO uint32_t CTL_LOW4; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI4; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI4_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT4; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED39;
- __IO uint32_t DSTAT4; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED40;
- __IO uint32_t SSTATAR4; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED41;
- __IO uint32_t DSTATAR4; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED42;
-
- union {
- __IO uint32_t CFG_LOW4; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI4; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR4; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED43;
-
- union {
- __IO uint32_t DSR4; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED44;
- __IO uint32_t SAR5; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED45;
- __IO uint32_t DAR5; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED46;
-
- union {
- __IO uint32_t LLP5; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED47;
-
- union {
- __IO uint32_t CTL_LOW5; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI5; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI5_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT5; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED48;
- __IO uint32_t DSTAT5; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED49;
- __IO uint32_t SSTATAR5; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED50;
- __IO uint32_t DSTATAR5; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED51;
-
- union {
- __IO uint32_t CFG_LOW5; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI5; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR5; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED52;
-
- union {
- __IO uint32_t DSR5; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED53;
- __IO uint32_t SAR6; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED54;
- __IO uint32_t DAR6; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED55;
-
- union {
- __IO uint32_t LLP6; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED56;
-
- union {
- __IO uint32_t CTL_LOW6; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI6; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI6_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT6; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED57;
- __IO uint32_t DSTAT6; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED58;
- __IO uint32_t SSTATAR6; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED59;
- __IO uint32_t DSTATAR6; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED60;
-
- union {
- __IO uint32_t CFG_LOW6; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI6; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR6; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED61;
-
- union {
- __IO uint32_t DSR6; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED62;
- __IO uint32_t SAR7; /*!< Current Source Address of DMA transfer */
- __I uint32_t RESERVED63;
- __IO uint32_t DAR7; /*!< Current Destination Address of DMA transfer */
- __I uint32_t RESERVED64;
-
- union {
- __IO uint32_t LLP7; /*!< Linked List Pointer Register for Channel */
-
- struct {
- __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that
- stores the next linked list item resides. */
- __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is
- enabled */
- } LLP7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED65;
-
- union {
- __IO uint32_t CTL_LOW7; /*!< Lower 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */
- __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */
- __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */
- __IO uint32_t DINC : 2; /*!< Destination Address Increment */
- __IO uint32_t SINC : 2; /*!< Source Address Increment */
- __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */
- __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */
- __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */
- __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */
- uint32_t : 1;
- __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */
- __IO uint32_t DMS : 2; /*!< Destination Master Select */
- __IO uint32_t SMS : 2; /*!< Source Master Select */
- __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */
- __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */
- } CTL_LOW7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CTL_HI7; /*!< Higher 32-bits Control Register for Channel */
-
- struct {
- __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform
- for every block transfer */
- __IO uint32_t DONE : 1; /*!< a block transfer is complete */
- } CTL_HI7_b; /*!< BitSize */
- };
- __IO uint32_t SSTAT7; /*!< Source Status Register for Channel */
- __I uint32_t RESERVED66;
- __IO uint32_t DSTAT7; /*!< Destination Status Register for Channel */
- __I uint32_t RESERVED67;
- __IO uint32_t SSTATAR7; /*!< Source Status Address Register for Channel */
- __I uint32_t RESERVED68;
- __IO uint32_t DSTATAR7; /*!< Destination Status Address Register for Channel */
- __I uint32_t RESERVED69;
-
- union {
- __IO uint32_t CFG_LOW7; /*!< Lower 32-bit Configuration Register for Channel */
-
- struct {
- uint32_t : 5;
- __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */
- __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit
- is cleared. */
- __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */
- __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */
- __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */
- __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */
- __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */
- __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */
- __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */
- __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */
- __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */
- __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */
- __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */
- __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */
- } CFG_LOW7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CFG_HI7; /*!< Higher 32-bit Configuration Register for Channel */
-
- struct {
- __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination
- Peripheral is the flow controller. */
- __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before
- a burst transaction request is serviced. */
- __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the
- HPROT[3:1] master interface signals */
- __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */
- } CFG_HI7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t SGR7; /*!< Source Gather Register for Channel */
-
- struct {
- __IO uint32_t SGI : 20; /*!< Source gather interval */
- __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */
- } SGR7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED70;
-
- union {
- __IO uint32_t DSR7; /*!< Destination Scatter Register for Channel */
-
- struct {
- __IO uint32_t DSI : 20; /*!< Destination scatter interval */
- __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of
- CTLx.DST_TR_WIDTH */
- } DSR7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED71[11];
- __I uint8_t INT_TFR; /*!< DMA Transfer Complete */
- __I uint8_t RESERVED72[7];
- __I uint8_t INT_BLOCK; /*!< Block Transfer Complete */
- __I uint8_t RESERVED73[7];
- __I uint8_t INT_SRC_TRAN; /*!< Source Transaction Complete */
- __I uint8_t RESERVED74[7];
- __I uint8_t INT_DST_TRAN; /*!< Destination Transaction Complete */
- __I uint8_t RESERVED75[7];
- __I uint8_t INT_ERR; /*!< Error */
- __I uint8_t RESERVED76[7];
-
- union {
- __IO uint16_t INT_EN_TFR; /*!< DMA Transfer Complete */
-
- struct {
- __IO uint16_t EN : 8; /*!< interrupt enable */
- __IO uint16_t WE : 8; /*!< interrupt enable write enable */
- } INT_EN_TFR_b; /*!< BitSize */
- };
- __I uint16_t RESERVED77[3];
-
- union {
- __IO uint16_t INT_EN_BLOCK; /*!< Block Transfer Complete */
-
- struct {
- __IO uint16_t EN : 8; /*!< interrupt enable */
- __IO uint16_t WE : 8; /*!< interrupt enable write enable */
- } INT_EN_BLOCK_b; /*!< BitSize */
- };
- __I uint16_t RESERVED78[3];
-
- union {
- __IO uint16_t INT_EN_SRC_TRAN; /*!< Source Transaction Complete */
-
- struct {
- __IO uint16_t EN : 8; /*!< interrupt enable */
- __IO uint16_t WE : 8; /*!< interrupt enable write enable */
- } INT_EN_SRC_TRAN_b; /*!< BitSize */
- };
- __I uint16_t RESERVED79[3];
-
- union {
- __IO uint16_t INT_EN_DST_TRAN; /*!< Destination Transaction Complete */
-
- struct {
- __IO uint16_t EN : 8; /*!< interrupt enable */
- __IO uint16_t WE : 8; /*!< interrupt enable write enable */
- } INT_EN_DST_TRAN_b; /*!< BitSize */
- };
- __I uint16_t RESERVED80[3];
-
- union {
- __IO uint16_t INT_EN_ERR; /*!< Error */
-
- struct {
- __IO uint16_t EN : 8; /*!< interrupt enable */
- __IO uint16_t WE : 8; /*!< interrupt enable write enable */
- } INT_EN_ERR_b; /*!< BitSize */
- };
- __I uint16_t RESERVED81[3];
- __O uint8_t INT_CLEAR_TFR; /*!< DMA Transfer Complete */
- __I uint8_t RESERVED82[7];
- __O uint8_t INT_CLEAR_BLOCK; /*!< Block Transfer Complete */
- __I uint8_t RESERVED83[7];
- __O uint8_t INT_CLEAR_SRC_TRAN; /*!< Source Transaction Complete */
- __I uint8_t RESERVED84[7];
- __O uint8_t INT_CLEAR_DST_TRAN; /*!< Destination Transaction Complete */
- __I uint8_t RESERVED85[7];
- __O uint8_t INT_CLEAR_ERR; /*!< Error */
- __I uint8_t RESERVED86[63];
-
- union {
- __IO uint32_t DMA_EN; /*!< DW_ahb_dmac Configuration Register */
-
- struct {
- __IO uint32_t EN : 1; /*!< enable */
- } DMA_EN_b; /*!< BitSize */
- };
- __I uint32_t RESERVED87;
-
- union {
- __IO uint32_t CH_EN; /*!< DW_ahb_dmac Channel Enable Register */
-
- struct {
- __IO uint32_t EN : 8; /*!< enable */
- __IO uint32_t WE : 8; /*!< enable write enable */
- } CH_EN_b; /*!< BitSize */
- };
- __I uint32_t RESERVED88[10];
-
- union {
- __I uint32_t DMA_COMP_PARAMS_6_HI; /*!< Component Parameters for channel 7 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_6_HI_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_5_LOW; /*!< Component Parameters for channel 6 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_5_LOW_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_5_HI; /*!< Component Parameters for channel 5 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_5_HI_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_4_LOW; /*!< Component Parameters for channel 4 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_4_LOW_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_4_HI; /*!< Component Parameters for channel 3 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_4_HI_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_3_LOW; /*!< Component Parameters for channel 2 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_3_LOW_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_3_HI; /*!< Component Parameters for channel 1 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_3_HI_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DMA_COMP_PARAMS_2_LOW; /*!< Component Parameters for channel 0 */
-
- struct {
- __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination
- transfer width. */
- __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source
- transfer width. */
- __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */
- __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */
- __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */
- __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */
- __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */
- __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */
- __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is
- on */
- __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */
- uint32_t : 2;
- __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */
- __I uint32_t DMS : 3; /*!< Destination AHB dma interface */
- __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */
- __I uint32_t SMS : 3; /*!< source AHB dma interface */
- __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */
- } DMA_COMP_PARAMS_2_LOW_b; /*!< BitSize */
- };
- __I uint32_t RESERVED89;
-
- union {
- __I uint32_t DMA_COMP_PARAMS_1_LOW; /*!< Maximum block size for channel */
-
- struct {
- __I uint32_t CH0_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 0. */
- __I uint32_t CH1_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 1 */
- __I uint32_t CH2_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 2 */
- __I uint32_t CH3_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 3 */
- __I uint32_t CH4_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 4 */
- __I uint32_t CH5_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 5 */
- __I uint32_t CH6_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 6 */
- __I uint32_t CH7_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 7 */
- } DMA_COMP_PARAMS_1_LOW_b; /*!< BitSize */
- };
-} DMA_Type;
-
-
-/* ================================================================================ */
-/* ================ ETH ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief ETH (ETH)
- */
-
-typedef struct { /*!< ETH Structure */
-
- union {
- __IO uint32_t CONFIG; /*!< MAC Configuration Register */
-
- struct {
- __IO uint32_t PRELEN : 2; /*!< Preamble Length for Transmit frames */
- __IO uint32_t RX_EN : 1; /*!< Receiver Enable */
- __IO uint32_t TX_EN : 1; /*!< Transmitter Enable */
- __IO uint32_t DC_EN : 1; /*!< Deferral Check Enable */
- uint32_t : 2;
- __IO uint32_t ACS : 1; /*!< Automatic Pad or CRC Stripping */
- __IO uint32_t LUD : 1; /*!< Link Up or Down */
- uint32_t : 1;
- __IO uint32_t IPC : 1; /*!< Checksum Offload */
- __IO uint32_t DM : 1; /*!< Duplex Mode */
- __IO uint32_t LM : 1; /*!< Loopback Mode */
- uint32_t : 1;
- __IO uint32_t FES : 1; /*!< Speed in XMII interface */
- __IO uint32_t PS : 1; /*!< the Ethernet line speed */
- uint32_t : 4;
- __IO uint32_t JE : 1; /*!< Jumbo enable */
- uint32_t : 1;
- __IO uint32_t JD : 1; /*!< if 0, the MAC cuts off the transmitter if more than 2,048 bytes
- of data (10,240 if JE is set high) */
- __IO uint32_t WD : 1; /*!< Watchdog Disable */
- __IO uint32_t TC : 1; /*!< If 1, this bit enables the transmission of duplex mode, link
- speed, and link up or down information to the PHY */
- __IO uint32_t CST : 1; /*!< CRC Stripping for Type Frames */
- uint32_t : 1;
- __IO uint32_t TWOKPE : 1; /*!< If 0, 1518 bytes is considered as a giant frame, 1 is 2000 bytes. */
- __IO uint32_t SARC : 3; /*!< Source Address Insertion or Replacement Control */
- } CONFIG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t FF; /*!< MAC Frame Filter */
-
- struct {
- __IO uint32_t PR : 1; /*!< Receive all frames in spite of source and destination address */
- __IO uint32_t HUC : 1; /*!< if 1, don't compare DA field in destination address filtering
- of unicast frames with DA register */
- __IO uint32_t HMC : 1; /*!< if 1, don't compare DA field in destination address filtering
- of multicast frames with DA register */
- __IO uint32_t DAIF : 1; /*!< if set, the Address Check block operates in inverse filtering
- mode for the DA address comparison */
- __IO uint32_t PM : 1; /*!< Pass All Multicast */
- __IO uint32_t DBF : 1; /*!< Disable Broadcast Frames */
- __IO uint32_t PCF : 2; /*!< Pass Control Frames */
- __IO uint32_t SAIF : 1; /*!< If set, the frames whose SA matches the SA registers are marked
- as failing the SA Address filter */
- __IO uint32_t SAF : 1; /*!< Source Address Filter Enable */
- __IO uint32_t HPF : 1; /*!< Hash or Perfect Filter */
- uint32_t : 5;
- __IO uint32_t VTFE : 1; /*!< VLAN Tag Filter Enable */
- uint32_t : 3;
- __IO uint32_t IPFE : 1; /*!< Layer 3 and Layer 4 Filter Enable */
- __IO uint32_t DNTU : 1; /*!< Drop non-TCP/UDP over IP Frames */
- uint32_t : 9;
- __IO uint32_t RA : 1; /*!< Receive all */
- } FF_b; /*!< BitSize */
- };
- __IO uint32_t HTH; /*!< Hash Table High Register */
- __IO uint32_t HTL; /*!< Hash Table Low Register */
-
- union {
- __IO uint32_t GMII_ADDR; /*!< GMII Address Register */
-
- struct {
- __IO uint32_t BUSY : 1; /*!< GMII Busy */
- __IO uint32_t GW : 1; /*!< GMII write or read */
- __IO uint32_t CR : 4; /*!< CSR Clock Range */
- __IO uint32_t GR : 5; /*!< These bits select the desired GMII register in the selected
- PHY device */
- __IO uint32_t PA : 5; /*!< This field indicates which of the 32 possible PHY devices are
- being accessed */
- } GMII_ADDR_b; /*!< BitSize */
- };
- __IO uint32_t GMII_DATA; /*!< GMII Data Register */
-
- union {
- __IO uint32_t FC; /*!< Flow Control Register */
-
- struct {
- __IO uint32_t FCB : 1; /*!< This bit initiates a Pause frame in the full-duplex mode */
- __IO uint32_t TFE : 1; /*!< MAC enables the flow control operation to transmit Pause frames */
- __IO uint32_t RFE : 1; /*!< MAC enables the flow control operation to receive Pause frames */
- __IO uint32_t UP : 1; /*!< MAC can detect Pause frames with unicast address of the station */
- } FC_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t VLAN_TAG; /*!< VLAN Tag Register */
-
- struct {
- __IO uint32_t VL : 16; /*!< VLAN Tag Identifier for Receive Frames */
- __IO uint32_t ETV : 1; /*!< Enable 12-Bit VLAN Tag Comparison */
- __IO uint32_t VTIM : 1; /*!< If set, The frames that do not have matching VLAN Tag are marked
- as matched */
- __IO uint32_t ESVL : 1; /*!< If set, consider the S-VLAN (Type = 0x88A8) frames as valid
- VLAN tagged frames */
- __IO uint32_t VTHM : 1; /*!< When set, the most significant four bits of the VLAN tag's CRC
- are used to index the content */
- } VLAN_TAG_b; /*!< BitSize */
- };
- __I uint32_t RESERVED0[2];
- __IO uint32_t RWUFFR; /*!< Remote Wake-Up Frame Filter Register */
-
- union {
- __IO uint32_t PMTCSR; /*!< PMT Control and Status Register */
-
- struct {
- __IO uint32_t PWRDWN : 1; /*!< Power Down */
- __IO uint32_t MGKPKTEN : 1; /*!< Magic Packet Enable */
- __IO uint32_t RWKPKTEN : 1; /*!< Remote Wake-Up Frame Enable */
- uint32_t : 2;
- __IO uint32_t MGKPRCVD : 1; /*!< the power management event is generated because of the reception
- of a magic packet */
- __IO uint32_t RWKPRCVD : 1; /*!< When set, this bit indicates the power management event is generated
- because of the reception of a remote wake-up frame */
- uint32_t : 2;
- __IO uint32_t GLBLUCAST : 1; /*!< When set, enables any unicast packet filtered by the MAC (DAF)address
- recognition to be a remote wake-up frame. */
- uint32_t : 14;
- __IO uint32_t RWKPTR : 3; /*!< Remote Wake-up FIFO Pointer */
- uint32_t : 4;
- __IO uint32_t RWKFILTRST : 1; /*!< Remote Wake-Up Frame Filter Register Pointer Reset. */
- } PMTCSR_b; /*!< BitSize */
- };
- __I uint32_t RESERVED1[2];
- __IO uint32_t MACISR; /*!< Interrupt Status Register */
- __IO uint32_t MACIMR; /*!< Interrupt Mask Register */
- __IO uint16_t ADDR0_HIGH; /*!< MAC Address0 High Register */
- __I uint16_t RESERVED2;
- __IO uint32_t ADDR0_LOW; /*!< MAC Address0 LOW Register */
-
- union {
- __IO uint32_t ADDR1_HIGH; /*!< MAC Address0 High Register */
-
- struct {
- __IO uint32_t ADDR : 16; /*!< MAC Address1 [47:32] */
- uint32_t : 14;
- __IO uint32_t SA : 1; /*!< MAC address1 is source or destination address compared with
- received frame */
- __IO uint32_t AE : 1; /*!< the address filter module uses the MAC address1 for filtering */
- } ADDR1_HIGH_b; /*!< BitSize */
- };
- __IO uint32_t ADDR1_LOW; /*!< MAC Address1 LOW Register */
- __I uint32_t RESERVED3[44];
-
- union {
- __IO uint32_t MMCCR; /*!< MMC Control Register */
-
- struct {
- __IO uint32_t CNTRST : 1; /*!< Counters Reset */
- __IO uint32_t CNTSTOPRO : 1; /*!< Counter Stop Rollover */
- __IO uint32_t RSTONRD : 1; /*!< Reset on Read */
- __IO uint32_t CNTFREEZ : 1; /*!< MMC Counter Freeze */
- __IO uint32_t CNTPRST : 1; /*!< Counters Preset */
- __IO uint32_t CNTPRSTLVL : 1; /*!< Counters Preset */
- uint32_t : 2;
- __IO uint32_t UCDBC : 1; /*!< Update MMC Counters for Dropped Broadcast Frames */
- } MMCCR_b; /*!< BitSize */
- };
- __IO uint32_t MMCRIR; /*!< MMC Receive Interrupt Register */
- __IO uint32_t MMCTIR; /*!< MMC Transmit Interrupt Register */
- __IO uint32_t MMCRIMR; /*!< MMC Receive interrupt mask */
- __IO uint32_t MMCTIMR; /*!< MMC Transmit Interrupt Mask */
- __I uint32_t RESERVED4[59];
- __IO uint32_t MMCIRCOIM; /*!< MMC IPC Receive Checksum Offload Interrupt Mask */
- __I uint32_t RESERVED5[319];
-
- union {
- __IO uint32_t PTPTSCR; /*!< Timestamp Control Register */
-
- struct {
- __IO uint32_t TSENA : 1; /*!< Timestamp Enable */
- __IO uint32_t TSCFUPDT : 1; /*!< Timestamp Fine or Coarse Update */
- __IO uint32_t TSINIT : 1; /*!< Timestamp Initialize */
- __IO uint32_t TSUPDT : 1; /*!< Timestamp Update */
- __IO uint32_t TSTRIG : 1; /*!< Timestamp Interrupt Trigger Enable */
- __IO uint32_t TSADDREG : 1; /*!< Addend Reg Update */
- } PTPTSCR_b; /*!< BitSize */
- };
- __IO uint32_t PTPSSIR; /*!< Sub-Second Increment Register */
- __IO uint32_t PTPTSHR; /*!< System Time Seconds Register */
- __IO uint32_t PTPTSLR; /*!< System Time Nanoseconds Register */
- __IO uint32_t PTPTSHUR; /*!< System Time Seconds Update Register */
- __IO uint32_t PTPTSLUR; /*!< System Time Nanoseconds Update Register */
- __IO uint32_t PTPTSAR; /*!< Timestamp Addend Register */
- __IO uint32_t PTPTTHR; /*!< Target Time Seconds Register */
- __IO uint32_t PTPTTLR; /*!< Target Time Nanoseconds Register */
- __I uint32_t RESERVED6[567];
-
- union {
- __IO uint32_t BUS_MODE; /*!< Flow Control Register */
-
- struct {
- __IO uint32_t SWR : 1; /*!< Software Reset */
- __IO uint32_t DA : 1; /*!< This bit specifies the arbitration scheme between the transmit
- and receive paths of Channel */
- __IO uint32_t DSL : 5; /*!< the byte number of bus width to skip between two unchained descriptors */
- __IO uint32_t ATDS : 1; /*!< When set, the size of the alternate descriptor increases to
- 32 bytes */
- __IO uint32_t PBL : 6; /*!< These bits indicate the maximum number of beats to be transferred
- in one DMA transaction */
- __IO uint32_t PR : 2; /*!< The Priority Ratio is (PR + 1) : 1 */
- __IO uint32_t FB : 1; /*!< performs fixed burst transfers or not */
- __IO uint32_t RPBL : 6; /*!< This field indicates the maximum number of beats to be transferred
- in one Rx DMA transaction */
- __IO uint32_t USP : 1; /*!< If set, RPBL is same as RPBL definition */
- __IO uint32_t PBLx8 : 1; /*!< If set, all PBLs multiplies 8 */
- __IO uint32_t AAL : 1; /*!< If set, all bursts aligned to the start address LS bits */
- __IO uint32_t MB : 1; /*!< When this bit is set high and the FB bit is low, the AHB master
- interface starts all bursts of length more than 16 with INCR */
- __IO uint32_t TXPR : 1; /*!< When set, the transmit DMA has higher priority than the receive
- DMA */
- __IO uint32_t PRWG : 2; /*!< The Priority weight is (PRWG + 1) : 1 */
- uint32_t : 1;
- __IO uint32_t RIB : 1; /*!< If set, rebuilds the pending beats of any burst transfer initiated
- with INCRx */
- } BUS_MODE_b; /*!< BitSize */
- };
- __IO uint32_t TPD; /*!< Transmit Poll Demand */
- __IO uint32_t RPD; /*!< Receive Poll Demand */
- __IO uint32_t RDESLA; /*!< Receive Descriptor List Address */
- __IO uint32_t TDESLA; /*!< Transmit Descriptor List Address */
-
- union {
- __IO uint32_t STATUS; /*!< Status Register */
-
- struct {
- __IO uint32_t TI : 1; /*!< This bit indicates that the frame transmission is complete */
- __IO uint32_t TPS : 1; /*!< Transmit Process Stopped */
- __IO uint32_t TU : 1; /*!< the host owns the Next Descriptor in the Transmit List and the
- DMA cannot acquire it. */
- __IO uint32_t TJT : 1; /*!< Transmit Jabber Timeout */
- __IO uint32_t OVF : 1; /*!< Receive Overflow */
- __IO uint32_t UNF : 1; /*!< Transmit Underflow */
- __IO uint32_t RI : 1; /*!< the frame reception is complete */
- __IO uint32_t RU : 1; /*!< Receive Buffer Unavailable */
- __IO uint32_t RPS : 1; /*!< Receive Process Stopped */
- __IO uint32_t RWT : 1; /*!< Receive Watchdog Timeout */
- __IO uint32_t ETI : 1; /*!< the frame to be transmitted is fully transferred to the MTL
- Transmit FIFO */
- uint32_t : 2;
- __IO uint32_t FBI : 1; /*!< a bus error occurred, as described in EB. */
- __IO uint32_t ERI : 1; /*!< the DMA filled the first data buffer of the packet */
- __IO uint32_t AIS : 1; /*!< Abnormal Interrupt Summary, must be cleared by writting */
- __IO uint32_t NIS : 1; /*!< Normal Interrupt Summary, must be cleared by writting */
- __I uint32_t RS : 3; /*!< Receive DMA FSM state */
- __I uint32_t TS : 3; /*!< Transmit DMA FSM state */
- __I uint32_t EB : 3; /*!< Error bit */
- __I uint32_t GLI : 1; /*!< GMAC Line Interface Interrupt */
- __I uint32_t GMI : 1; /*!< GMAC MMC Interrupt */
- __I uint32_t GPI : 1; /*!< GMAC PMT Interrupt */
- __I uint32_t TTI : 1; /*!< Timestamp Trigger Interrupt */
- } STATUS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t OPERATION; /*!< Operation Mode Register */
-
- struct {
- uint32_t : 1;
- __IO uint32_t SR : 1; /*!< Start or Stop Receive */
- __IO uint32_t OSF : 1; /*!< Operate on Second Frame */
- __IO uint32_t RT : 2; /*!< Receive Threshold Control */
- __IO uint32_t DGF : 1; /*!< Drop Giant Frames */
- __IO uint32_t FUF : 1; /*!< Forward Undersized Good Frames */
- __IO uint32_t FEF : 1; /*!< Forward Error Frames */
- uint32_t : 5;
- __IO uint32_t ST : 1; /*!< Start or Stop Transmission Command */
- __IO uint32_t TT : 3; /*!< Transmit Threshold Control */
- uint32_t : 3;
- __IO uint32_t FTF : 1; /*!< Flush Transmit FIFO */
- __IO uint32_t TSF : 1; /*!< If set, transmission starts when a full frame resides in Transmit
- FIFO */
- uint32_t : 2;
- __IO uint32_t DFF : 1; /*!< Disable Flushing of Received Frames */
- __IO uint32_t RSF : 1; /*!< If set, the MTL reads a frame from the Rx FIFO while the complete
- frame has been written to it, */
- } OPERATION_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INT_EN; /*!< Interrupt Enable Register */
-
- struct {
- __IO uint32_t TIE : 1; /*!< Transmit Interrupt Enable */
- __IO uint32_t TSE : 1; /*!< Transmit Stopped Enable */
- __IO uint32_t TUE : 1; /*!< Transmit Buffer Unavailable Enable */
- __IO uint32_t TJE : 1; /*!< Transmit Jabber Timeout Enable */
- __IO uint32_t OVE : 1; /*!< Overflow Interrupt Enable */
- __IO uint32_t UNE : 1; /*!< Underflow Interrupt Enable */
- __IO uint32_t RIE : 1; /*!< Receive Interrupt Enable */
- __IO uint32_t RUE : 1; /*!< Receive Buffer Unavailable Enable */
- __IO uint32_t RSE : 1; /*!< Receive Stopped Enable */
- __IO uint32_t RWE : 1; /*!< Receive Watchdog Timeout Enable */
- __IO uint32_t ETE : 1; /*!< Early Transmit Interrupt Enable */
- uint32_t : 2;
- __IO uint32_t FBE : 1; /*!< Fatal Bus Error Enable */
- __IO uint32_t ERE : 1; /*!< Early Receive Interrupt Enable */
- __IO uint32_t AIE : 1; /*!< Abnormal Interrupt Summary Enable */
- __IO uint32_t NIE : 1; /*!< Normal Interrupt Summary Enable */
- } INT_EN_b; /*!< BitSize */
- };
- __I uint32_t RESERVED7[3];
-
- union {
- __IO uint32_t AHB_STATUS; /*!< AHB Status Register */
-
- struct {
- __IO uint32_t BUSY : 1; /*!< If set, it indicates that the AHB master interface FSMs are
- in the non-idle state */
- } AHB_STATUS_b; /*!< BitSize */
- };
- __I uint32_t RESERVED8[6];
- __I uint32_t CURTDESAPTR; /*!< Current Host Transmit Descriptor Register */
- __I uint32_t CURRDESAPTR; /*!< Current Host Receive Descriptor Register */
- __I uint32_t CURTBUFAPTR; /*!< Current Host Transmit Buffer Address Register */
- __I uint32_t CURRBUFAPTR; /*!< Current Host Receive Buffer Address Register */
-} ETH_Type;
-
-
-/* ================================================================================ */
-/* ================ USB ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief USB (USB)
- */
-
-typedef struct { /*!< USB Structure */
-
- union {
- __IO uint32_t GOTGCTL; /*!< Control and Status register */
-
- struct {
- __I uint32_t SES_REQ_SCS: 1; /*!< set when a session request initiation is successful as a device */
- __IO uint32_t SES_SEQ : 1; /*!< set to initiate a session request on the USB as a device */
- __IO uint32_t VB_VALID_OV_EN: 1; /*!< enable/disable the software to override the Bvalid signal using
- the GOTGCTL.VbvalidOvVal as a host */
- __IO uint32_t VB_VALID_OV_VAL: 1; /*!< set Override value for vbusvalid signal when GOTGCTL.VbvalidOvEn
- is set as a host */
- __IO uint32_t A_VALID_OV_EN: 1; /*!< enable/disable the software to override the Avalid signal using
- the GOTGCTL.AvalidOvVal as a host */
- __IO uint32_t A_VALID_OV_VAL: 1; /*!< set Override value for Avalid signal when GOTGCTL.AvalidOvEn
- is set as a host */
- __IO uint32_t B_VALID_OV_EN: 1; /*!< enable/disable the software to override the Bvalid signal using
- the GOTGCTL.BvalidOvVal as a device. */
- __IO uint32_t B_VALID_OV_VAL: 1; /*!< set Override value for Bvalid signal when GOTGCTL.BvalidOvEn
- is set as a device. */
- __I uint32_t HST_NEG_SCS: 1; /*!< sets when host negotiation is successful as a device. */
- __IO uint32_t HNP_REQ : 1; /*!< sets this bit to initiate an HNP request to the connected USB
- host as a device */
- __IO uint32_t HST_SET_HNP_EN: 1; /*!< Host Set HNP Enable as a host */
- __IO uint32_t DEV_HNP_EN : 1; /*!< Device HNP Enabled as a device */
- uint32_t : 4;
- __I uint32_t CON_ID_STS : 1; /*!< Connector ID Status */
- __I uint32_t DBNC_TIME : 1; /*!< the debounce time of a detected connection as a host */
- __I uint32_t A_SES_VLD : 1; /*!< A-Session Valid as a host */
- __I uint32_t B_SES_VLD : 1; /*!< B-Session Valid as a host */
- __IO uint32_t OTG_VER : 1; /*!< If 0, OTG Version 1.3. If 1, OTG Version 2.0. */
- } GOTGCTL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GOTGINT; /*!< OTG interrupt Register */
-
- struct {
- uint32_t : 2;
- __IO uint32_t SES_END_DET: 1; /*!< Set when the utmiotg_bvalid signal is deasserted */
- uint32_t : 5;
- __IO uint32_t SES_REQ_SUC_STS_CHNG: 1; /*!< Session Request Success Status Change */
- __IO uint32_t HST_NEG_SUC_STS_CHNG: 1; /*!< Host Negotiation Success Status Change */
- uint32_t : 7;
- __IO uint32_t HST_NEG_DET: 1; /*!< if set, detects a host negotiation request on the USB */
- __IO uint32_t A_DEV_TOUT_CHG: 1; /*!< A-device has timed out while waiting for the B-device to connect */
- __IO uint32_t DBNCE_DONE : 1; /*!< debounce is completed after the device connect as a host */
- } GOTGINT_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GAHBCFG; /*!< AHB Configuration Register */
-
- struct {
- __IO uint32_t GLBL_INTR_EN: 1; /*!< Global Interrupt Enable */
- __IO uint32_t BST_LEN : 4; /*!< Burst Length/Type */
- __IO uint32_t DMA_EN : 1; /*!< DMA enable */
- uint32_t : 15;
- __IO uint32_t REMOTE_MEM_SUPP: 1; /*!< enable the functionality to wait for the system DMA Done Signal
- for the DMA Write Transfers */
- __IO uint32_t NOTIFY_ALL_DMA_WRITE: 1; /*!< enable the System DMA Done functionality for all the DMA write
- Transactions corresponding to the Channel/Endpoint */
- __IO uint32_t AHB_SINGLE : 1; /*!< supports Single transfers for the remaining data in a transfer */
- } GAHBCFG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GUSBCFG; /*!< USB Configuration Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t PHY_IF : 1; /*!< PHY Interface */
- __IO uint32_t ULPI_UTMI_SEL: 1; /*!< 1, ULPI. 0, UTMI+ */
- __IO uint32_t FS_IF : 1; /*!< 1, 3-pin bidirectional. 0, 6-pin unidirectional */
- __IO uint32_t PHY_SEL : 1; /*!< 0, USB 2.0 High-Speed PHY. 1, USB 1.1 full-speed serial transceiver */
- __IO uint32_t DDR_SEL : 1; /*!< 0, Single Data Rate ULPI Interface, with 8-bit-wide data bus.
- 1, Double Data Rate ULPI Interface, with 4-bit-wide data bus */
- __IO uint32_t SRP_CAP : 1; /*!< SRP-Capable */
- __IO uint32_t HNP_CAP : 1; /*!< HNP-Capable */
- __IO uint32_t USB_TRD_TIM: 4; /*!< Specifies the response time for a MAC request to the Packet
- FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM) as
- a device. */
- uint32_t : 1;
- __IO uint32_t PHY_LPWR_CLK_SEL: 1; /*!< 0, 480-MHz Internal PLL clock. 1, 48-MHz External Clock */
- uint32_t : 12;
- __IO uint32_t TX_END_DELAY: 1; /*!< Tx End Delay as a device */
- __IO uint32_t FORCE_HOST_MODE: 1; /*!< Force Host Mode */
- __IO uint32_t FORCE_DEVICE_MODE: 1; /*!< Force Device Mode */
- } GUSBCFG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GRSTCTL; /*!< Reset Register */
-
- struct {
- __IO uint32_t CORE_SOFT_RST: 1; /*!< Core Soft Reset */
- uint32_t : 1;
- __IO uint32_t FRM_CNT_RST: 1; /*!< Host Frame Counter Reset */
- uint32_t : 1;
- __IO uint32_t RX_FIFO_FLUSH: 1; /*!< RxFIFO Flush */
- __IO uint32_t TX_FIFO_FLUSH: 1; /*!< TxFIFO Flush */
- __IO uint32_t TX_FIFO_FLUSH_NUM: 4; /*!< This field indicates which of the 32 possible PHY devices are
- being accessed */
- __IO uint32_t TX_FIFO_ALL: 1; /*!< TxFIFO flush all FIFOs */
- uint32_t : 19;
- __I uint32_t DMA_REQ : 1; /*!< Indicates that the DMA request is in progress */
- __I uint32_t AHB_IDLE : 1; /*!< Indicates that the AHB Master State Machine is in the IDLE condition */
- } GRSTCTL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GINTSTS; /*!< Interrupt Register */
-
- struct {
- __I uint32_t CUR_MOD : 1; /*!< Current Mode of Operation */
- __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch Interrupt */
- __I uint32_t OTG_INT : 1; /*!< OTG Interrupt */
- __IO uint32_t SOF : 1; /*!< Start of (micro)Frame */
- __I uint32_t RFNE : 1; /*!< RxFIFO Non-Empty */
- __I uint32_t NPTFE : 1; /*!< Non-periodic TxFIFO Empty */
- __I uint32_t GIN_NAK_EFF: 1; /*!< Global IN Non-periodic NAK Effective as a device */
- __I uint32_t GOUT_NAK_EFF: 1; /*!< Global OUT NAK Effective as a device */
- uint32_t : 2;
- __IO uint32_t EARLY_SUS : 1; /*!< an Idle state has been detected on the USB For 3 ms as a device */
- __IO uint32_t USB_SUS : 1; /*!< A suspend was detected on the USB as a device */
- __IO uint32_t USB_RST : 1; /*!< A reset is detected on the USB as a device */
- __IO uint32_t ENUM_DONE : 1; /*!< speed enumeration is complete as a device */
- __IO uint32_t ISO_OUT_DROP: 1; /*!< Drop an isochronous OUT packet while no space in RXFIFO as a
- device */
- __IO uint32_t EOPF : 1; /*!< End of Periodic Frame Interrupt as a device */
- uint32_t : 1;
- __I uint32_t EP_MIS : 1; /*!< Endpoint Mismatch Interrupt as a device */
- __I uint32_t IEP_INT : 1; /*!< IN Endpoints Interrupt as a device */
- __I uint32_t OEP_INT : 1; /*!< OUT Endpoints Interrupt as a device */
- __IO uint32_t INCOMP_ISO_IN: 1; /*!< Incomplete Isochronous IN Transfer as a device */
- __IO uint32_t IPT_IIOT : 1; /*!< OUT Incomplete Periodic Transfer as a host or Incomplete Isochronous
- OUT Transfer as a device */
- __IO uint32_t DFS : 1; /*!< Data Fetch Suspended as a device */
- __IO uint32_t RST_DET : 1; /*!< reset detect as a device */
- __I uint32_t HP : 1; /*!< a change in port status of one of the DWC_otg core ports as
- a host */
- __I uint32_t HC : 1; /*!< an interrupt is pending on one of the channels of the core as
- a host */
- __I uint32_t PTFE : 1; /*!< Periodic TxFIFO Empty as a host */
- __IO uint32_t LPM : 1; /*!< LPM Transaction Received Interrupt */
- __IO uint32_t CIDSC : 1; /*!< A change in connector ID status */
- __IO uint32_t DD : 1; /*!< A change in connector ID status */
- __IO uint32_t SR : 1; /*!< Session Request/New Session Detected Interrupt */
- __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */
- } GINTSTS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GINTEN; /*!< Interrupt enable Register */
-
- struct {
- uint32_t : 1;
- __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch */
- __IO uint32_t OTG_INT : 1; /*!< OTG */
- __IO uint32_t SOF : 1; /*!< Start of (micro)Frame */
- __IO uint32_t RFNE : 1; /*!< RxFIFO Non-Empty */
- __IO uint32_t NPTFE : 1; /*!< Non-periodic TxFIFO Empty */
- __IO uint32_t GIN_NAK_EFF: 1; /*!< Global IN Non-periodic NAK Effective as a device */
- __IO uint32_t GOUT_NAK_EFF: 1; /*!< Global OUT NAK Effective as a device */
- uint32_t : 2;
- __IO uint32_t EARLY_SUS : 1; /*!< an Idle state has been detected on the USB For 3 ms as a device */
- __IO uint32_t USB_SUS : 1; /*!< A suspend was detected on the USB as a device */
- __IO uint32_t USB_RST : 1; /*!< A reset is detected on the USB as a device */
- __IO uint32_t ENUM_DONE : 1; /*!< speed enumeration is complete as a device */
- __IO uint32_t ISO_OUT_DROP: 1; /*!< Drop an isochronous OUT packet while no space in RXFIFO as a
- device */
- __IO uint32_t EOPF : 1; /*!< End of Periodic Frame Interrupt as a device */
- uint32_t : 1;
- __IO uint32_t EP_MIS : 1; /*!< Endpoint Mismatch Interrupt as a device */
- __IO uint32_t IEP_INT : 1; /*!< IN Endpoints Interrupt as a device */
- __IO uint32_t OEP_INT : 1; /*!< OUT Endpoints Interrupt as a device */
- __IO uint32_t INCOMP_ISO_IN: 1; /*!< Incomplete Isochronous IN Transfer as a device */
- __IO uint32_t IPT_IIOT : 1; /*!< OUT Incomplete Periodic Transfer as a host or Incomplete Isochronous
- OUT Transfer as a device */
- __IO uint32_t DFS : 1; /*!< Data Fetch Suspended as a device */
- __IO uint32_t RST_DET : 1; /*!< reset detect as a device */
- __IO uint32_t HP : 1; /*!< a change in port status of one of the DWC_otg core ports as
- a host */
- __IO uint32_t HC : 1; /*!< an interrupt is pending on one of the channels of the core as
- a host */
- __IO uint32_t PTFE : 1; /*!< Periodic TxFIFO Empty as a host */
- __IO uint32_t LPM : 1; /*!< LPM Transaction Received Interrupt */
- __IO uint32_t CIDSC : 1; /*!< A change in connector ID status */
- __IO uint32_t DD : 1; /*!< A change in connector ID status */
- __IO uint32_t SR : 1; /*!< Session Request/New Session Detected Interrupt */
- __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */
- } GINTEN_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t GRXSTSR; /*!< Returns the contents of the top of the Receive FIFO */
-
- struct {
- __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */
- __I uint32_t BCNT : 11; /*!< byte count of the received packet */
- __I uint32_t DPID : 2; /*!< Data PID of the received packet */
- __I uint32_t PS : 4; /*!< the status of the received packet */
- __I uint32_t FN : 4; /*!< the least significant 4 bits of the (micro)frame number in which
- the packet is received on the USB */
- } GRXSTSR_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t GRXSTSP; /*!< Pop the contents of the top of the Receive FIFO */
-
- struct {
- __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */
- __I uint32_t BCNT : 11; /*!< byte count of the received packet */
- __I uint32_t DPID : 2; /*!< Data PID of the received packet */
- __I uint32_t PS : 4; /*!< the status of the received packet */
- __I uint32_t FN : 4; /*!< the least significant 4 bits of the (micro)frame number in which
- the packet is received on the USB */
- } GRXSTSP_b; /*!< BitSize */
- };
- __IO uint16_t GRXFSIZ; /*!< This value is in terms of 32-bit words, 16 is minimize and 32768
- is max */
- __I uint16_t RESERVED0;
-
- union {
- __IO uint32_t GNPTXFSIZ; /*!< Non-Periodic Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t NTRSA_INEF0TRSA: 16; /*!< start address for Non-periodic Transmit FIFO RAM as a host or
- IN Endpoint FIFO0 Transmit RAM as a device */
- __IO uint32_t NTD_INEF0TD: 16; /*!< This value is in terms of 32-bit words, 16 is minimize and 32768
- is max. Non-periodic TxFIFO Depth as a host or IN Endpoint TxFIFO
- 0 Depth as a device */
- } GNPTXFSIZ_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t GNPTXSTS; /*!< Non-Periodic Transmit FIFO/Queue Status Register */
-
- struct {
- __I uint32_t NTSA : 16; /*!< the amount of free space available in the Non-periodic TxFIFO,
- max is 32768. */
- __I uint32_t NTRQSA : 8; /*!< the amount of free space available in the Non-periodic Transmit
- Request Queue, max is 8. */
- __I uint32_t TNTRQ_LAST : 1; /*!< last Entry in the Non-periodic Tx Request Queue that is currently
- being processed by the MAC */
- __I uint32_t TNTRQ_TYPE : 2; /*!< type in the Non-periodic Tx Request Queue that is currently
- being processed by the MAC */
- __I uint32_t TNTRQ_CH : 4; /*!< Channel of top of the Non-periodic Transmit Request Queue */
- } GNPTXSTS_b; /*!< BitSize */
- };
- __I uint32_t RESERVED1[5];
-
- union {
- __I uint32_t GHWCFG1; /*!< User HW Config1 Register */
-
- struct {
- __I uint32_t EP0_DIR : 2; /*!< Endpoint 0 direction, always Bidirection */
- __I uint32_t EP1_DIR : 2; /*!< Endpoint 1 direction */
- __I uint32_t EP2_DIR : 2; /*!< Endpoint 2 direction */
- __I uint32_t EP3_DIR : 2; /*!< Endpoint 3 direction */
- __I uint32_t EP4_DIR : 2; /*!< Endpoint 4 direction */
- __I uint32_t EP5_DIR : 2; /*!< Endpoint 5 direction */
- __I uint32_t EP6_DIR : 2; /*!< Endpoint 6 direction */
- __I uint32_t EP7_DIR : 2; /*!< Endpoint 7 direction */
- __I uint32_t EP8_DIR : 2; /*!< Endpoint 8 direction */
- __I uint32_t EP9_DIR : 2; /*!< Endpoint 9 direction */
- __I uint32_t EP10_DIR : 2; /*!< Endpoint 10 direction */
- __I uint32_t EP11_DIR : 2; /*!< Endpoint 11 direction */
- __I uint32_t EP12_DIR : 2; /*!< Endpoint 12 direction */
- __I uint32_t EP13_DIR : 2; /*!< Endpoint 13 direction */
- __I uint32_t EP14_DIR : 2; /*!< Endpoint 14 direction */
- __I uint32_t EP15_DIR : 2; /*!< Endpoint 15 direction */
- } GHWCFG1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED2[3];
-
- union {
- __IO uint32_t GLPMCFG; /*!< Core LPM Configuration Register */
-
- struct {
- __IO uint32_t EP0_DIR : 1; /*!< LPM capability is enabled */
- } GLPMCFG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GPWRDN; /*!< Global Power Down Register */
-
- struct {
- uint32_t : 1;
- __IO uint32_t PMU_ACTIVE : 1; /*!< PMU Active is enabled */
- uint32_t : 1;
- __IO uint32_t PDC : 1; /*!< Power Down Clamp is enabled */
- __IO uint32_t PDR : 1; /*!< If clear, Reset DWC_otg */
- __IO uint32_t PDS : 1; /*!< If 0, DWC_otg is in ON state, or OFF state */
- __IO uint32_t DIS_VBUS : 1; /*!< Disable VBUS */
- uint32_t : 8;
- __IO uint32_t SRP_DETECT_INT: 1; /*!< SRP has been detected by the PMU as a host */
- __IO uint32_t SRP_DETECT_INT_EN: 1; /*!< Enable For SRPDetect Interrupt as a host */
- __IO uint32_t STATE_CHN_INT: 1; /*!< a status change in either the IDDIG or BSessVld signal */
- __IO uint32_t STATE_CHN_INT_EN: 1; /*!< Enable For Status Change Interrupt */
- __I uint32_t LINE_STATE : 2; /*!< the current linestate on USB as seen by the PMU module */
- __I uint32_t IDDIG : 1; /*!< the status of the IDDIG signal. If 0, host mode. if 1, device
- mode */
- __I uint32_t B_SESS_VLD : 1; /*!< B session valid status signal from the PHY */
- __IO uint32_t ADP_INT : 1; /*!< set whenever there is a ADP event */
- } GPWRDN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t GDFIFOCFG; /*!< Global DFIFO Software Config Register */
-
- struct {
- __IO uint32_t GDFIFOCFG : 16; /*!< This field is for dynamic programming of the DFIFO Size. */
- __IO uint32_t EPIBA : 16; /*!< This field provides the start address of the EP info controller */
- } GDFIFOCFG_b; /*!< BitSize */
- };
- __I uint32_t RESERVED3[40];
-
- union {
- __IO uint32_t HPTXFSIZ; /*!< Host Periodic Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t HPTSA : 16; /*!< start address of the Periodic TxFIFO */
- __IO uint32_t EPIBA : 16; /*!< the size of the Periodic TxFIFO */
- } HPTXFSIZ_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF1; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF2; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF3; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF4; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF5; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF6; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF7; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF8; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF8_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF9; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF9_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF10; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF10_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF11; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF11_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF12; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF12_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF13; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF13_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF14; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF14_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DIEPTXF15; /*!< Device In Endpoint Transmit FIFO Size Register */
-
- struct {
- __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */
- } DIEPTXF15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED4[176];
-
- union {
- __IO uint32_t HCFG; /*!< Host Configuration Register */
-
- struct {
- __IO uint32_t FS_LS_PCS : 2; /*!< FS/LS PHY Clock Select as a host */
- __IO uint32_t FS_LS_SUPPORT: 1; /*!< If set, FS/LS-only, even If the connected device can support
- HS */
- uint32_t : 4;
- __IO uint32_t EN_32K_SUS : 1; /*!< Enable 32 KHz Suspend mode */
- __IO uint32_t RVP : 8; /*!< ResValid number of clock cycles to detect a valid resume */
- uint32_t : 7;
- __IO uint32_t EN_SG_DMA : 1; /*!< Enable Scatter/gather DMA in Host mode */
- __IO uint32_t FLE : 2; /*!< the number of entries in the Frame list. 8 times of FLE */
- __IO uint32_t EPS : 1; /*!< Enables periodic scheduling */
- uint32_t : 4;
- __IO uint32_t MCRTE : 1; /*!< enable/disable the Host core to wait 200 PHY clock cycles at
- the end of Resume to change the opmode signal to the PHY to
- 00 after Suspend or LPM. */
- } HCFG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HFIR; /*!< Host Frame Interval Register */
-
- struct {
- __IO uint32_t FI : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */
- __IO uint32_t RC : 1; /*!< The HFIR can be dynamically reloaded during runtime if set */
- } HFIR_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t HFNUM; /*!< Host Frame Number/Frame Time Remaining Register */
-
- struct {
- __I uint32_t FN : 16; /*!< This field increments when a new SOF is transmitted on the USB */
- __I uint32_t FTR : 16; /*!< amount of time remaining in the current microframe (HS) or Frame
- (FS/LS), in terms of PHY clocks */
- } HFNUM_b; /*!< BitSize */
- };
- __I uint32_t RESERVED5;
-
- union {
- __I uint32_t HPTXSTS; /*!< Host Periodic Transmit FIFO/Queue Status Register */
-
- struct {
- __I uint32_t PTDFSA : 16; /*!< Indicates the number of free locations available to be written
- to in the Periodic TxFIFO, max is 32768 */
- __I uint32_t PTRQSA : 8; /*!< Indicates the number of free locations available to be written
- in the Periodic Transmit Request Queue, max is 16 */
- __I uint32_t TPTRQ_LAST : 1; /*!< last Entry in the periodic Tx Request Queue that is currently
- being processed by the MAC */
- __I uint32_t TPTRQ_TYPE : 2; /*!< type in the periodic Tx Request Queue that is currently being
- processed by the MAC */
- __I uint32_t TPTRQ_CH : 4; /*!< Channel of top of the periodic Transmit Request Queue */
- __I uint32_t TPTRQ_ODD_FRAME: 1; /*!< If set, send in odd (micro)Frame */
- } HPTXSTS_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t HAINT; /*!< Host All Channels Interrupt Register */
-
- struct {
- __I uint32_t INT : 16; /*!< Channel Interrupts, from 0 to 15. */
- } HAINT_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HAINT_EN; /*!< Host All Channels Interrupt Enable Register */
-
- struct {
- __IO uint32_t EN : 16; /*!< Channel Interrupts Enable, from 0 to 15. */
- } HAINT_EN_b; /*!< BitSize */
- };
- __IO uint32_t HFLBA; /*!< The starting address of the Frame list */
- __I uint32_t RESERVED6[8];
-
- union {
- __IO uint32_t __HPRT; /*!< Host Port Control and Status Register */
-
- struct {
- __I uint32_t PCS : 1; /*!< If a device is attached to the port */
- __IO uint32_t PCD : 1; /*!< A device connection is detected */
- __IO uint32_t PE : 1; /*!< Port Enable */
- __IO uint32_t PEDC : 1; /*!< Set if when the status of the Port Enable (bit 2) of this register
- changes */
- __I uint32_t POA : 1; /*!< Indicates the overcurrent condition of the port */
- __IO uint32_t POC : 1; /*!< Set if when the status of the Port Overcurrent Active bit (bit
- 4) in this register changes */
- __IO uint32_t PR : 1; /*!< Application and Core all can perform resume by setting, then
- clear it whatever resume is success or not */
- __IO uint32_t PS : 1; /*!< Sets this bit to put this port in Suspend mode */
- __IO uint32_t PRESET : 1; /*!< sets this bit, a reset sequence is started on this port */
- uint32_t : 1;
- __IO uint32_t PLSDP : 1; /*!< Logic level of D+ */
- __IO uint32_t PLSDN : 1; /*!< Logic level of D- */
- __IO uint32_t PP : 1; /*!< this field to control power to this port. 1, power on */
- __IO uint32_t PTC : 4; /*!< The application writes a nonzero value to this field to put
- the port into a Test mode */
- __I uint32_t SPEED : 2; /*!< Indicates the speed of the device attached to this port */
- } __HPRT_b; /*!< BitSize */
- };
- __I uint32_t RESERVED7[47];
-
- union {
- __IO uint32_t HCC0; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED8;
-
- union {
- __IO uint32_t HCINT0; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN0; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ0; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA0; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED9;
- __IO uint32_t HCDMAB0; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC1; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED10;
-
- union {
- __IO uint32_t HCINT1; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN1; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ1; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA1; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED11;
- __IO uint32_t HCDMAB1; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC2; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED12;
-
- union {
- __IO uint32_t HCINT2; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN2; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ2; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA2; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED13;
- __IO uint32_t HCDMAB2; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC3; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED14;
-
- union {
- __IO uint32_t HCINT3; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN3; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ3; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA3; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED15;
- __IO uint32_t HCDMAB3; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC4; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED16;
-
- union {
- __IO uint32_t HCINT4; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN4; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ4; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ4_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA4; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED17;
- __IO uint32_t HCDMAB4; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC5; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED18;
-
- union {
- __IO uint32_t HCINT5; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN5; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ5; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ5_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA5; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED19;
- __IO uint32_t HCDMAB5; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC6; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED20;
-
- union {
- __IO uint32_t HCINT6; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN6; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ6; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ6_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA6; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED21;
- __IO uint32_t HCDMAB6; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC7; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED22;
-
- union {
- __IO uint32_t HCINT7; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN7; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ7; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ7_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA7; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED23;
- __IO uint32_t HCDMAB7; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC8; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED24;
-
- union {
- __IO uint32_t HCINT8; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT8_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN8; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN8_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ8; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ8_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA8; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED25;
- __IO uint32_t HCDMAB8; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC9; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED26;
-
- union {
- __IO uint32_t HCINT9; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT9_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN9; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN9_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ9; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ9_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA9; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED27;
- __IO uint32_t HCDMAB9; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC10; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED28;
-
- union {
- __IO uint32_t HCINT10; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT10_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN10; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN10_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ10; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ10_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA10; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED29;
- __IO uint32_t HCDMAB10; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC11; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED30;
-
- union {
- __IO uint32_t HCINT11; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT11_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN11; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN11_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ11; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ11_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA11; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED31;
- __IO uint32_t HCDMAB11; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC12; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED32;
-
- union {
- __IO uint32_t HCINT12; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT12_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN12; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN12_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ12; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ12_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA12; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED33;
- __IO uint32_t HCDMAB12; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC13; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED34;
-
- union {
- __IO uint32_t HCINT13; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT13_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN13; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN13_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ13; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ13_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA13; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED35;
- __IO uint32_t HCDMAB13; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC14; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED36;
-
- union {
- __IO uint32_t HCINT14; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT14_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN14; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN14_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ14; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ14_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA14; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED37;
- __IO uint32_t HCDMAB14; /*!< Host Channel-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t HCC15; /*!< Host Channel Characteristics Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */
- uint32_t : 1;
- __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */
- __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source
- or sink. */
- __IO uint32_t OF : 1; /*!< The frame is odd or even. */
- __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */
- __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not
- yet. */
- } HCC15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED38;
-
- union {
- __IO uint32_t HCINT15; /*!< Host Channel Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT15_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCINT_EN15; /*!< Host Channel Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data
- source or sink. */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- uint32_t : 8;
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */
- __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */
- } HCINT_EN15_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCTSIZ15; /*!< Host Channel Transfer Size Register */
-
- struct {
- __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that
- microframe.Bit N indicates scheduling for Nth microframe scheduling
- for 8th microframe in that frame. */
- __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */
- uint32_t : 13;
- __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */
- __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */
- } HCTSIZ15_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t HCDMA15; /*!< Host Channel-n DMA Address Register */
-
- struct {
- uint32_t : 3;
- __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */
- __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */
- } HCDMA15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED39;
- __IO uint32_t HCDMAB15; /*!< Host Channel-n DMA Buffer Address Register */
- __I uint32_t RESERVED40[64];
-
- union {
- __IO uint32_t DCFG; /*!< Device Configuration Register */
-
- struct {
- __IO uint32_t DSPEED : 2; /*!< the maximum speed the application can support */
- __IO uint32_t NZLSOH : 1; /*!< select the handshake the core sends on receiving a non zero-length
- data packet during the OUT transaction of a control transfer's
- Status stage */
- __IO uint32_t EN_32K_SUS : 1; /*!< Enable 32 KHz Suspend mode */
- __IO uint32_t DEVICE_ADDR: 7; /*!< The application must program this field after every SetAddress
- control command */
- __IO uint32_t PFI : 2; /*!< Indicates the time within a (micro)frame at which the application
- must be notified using the End Of Periodic Frame Interrupt */
- __IO uint32_t EDON : 1; /*!< If set the core sets NAK after Bulk OUT transfer complete */
- uint32_t : 9;
- __IO uint32_t EN_SG_DMA : 1; /*!< enable the Scatter/Gather DMA operation */
- __IO uint32_t PSI : 2; /*!< Periodic Scheduling Interval */
- __IO uint32_t RVP : 6; /*!< It controls the resume period when the core resumes from suspend */
- } DCFG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DCTL; /*!< Device Control Register */
-
- struct {
- __IO uint32_t RWS : 1; /*!< If set, the core initiates remote signaling to wake the USB
- hosts */
- __IO uint32_t SD : 1; /*!< If set, generates a device disconnect event to the USB host */
- __I uint32_t GNPINS : 1; /*!< A NAK handshake is sent out on all non-periodic IN endpoints,
- irrespective of the data availability in the transmit FIFO. */
- __I uint32_t GONS : 1; /*!< No data is written to the RxFIFO, irrespective of space availability.. */
- __IO uint32_t TC : 3; /*!< Test Control */
- __O uint32_t SGNPIN : 1; /*!< A write to this field sets the Global Non-periodic IN NAK */
- __O uint32_t CGNPIN : 1; /*!< A write to this field clears the Global Non-periodic IN NAK */
- __O uint32_t SGON : 1; /*!< A write to this field sets the Global OUT NAK */
- __O uint32_t CGON : 1; /*!< A write to this field sets the Global OUT NAK. */
- __IO uint32_t POPD : 1; /*!< Power-On Programming Done */
- __IO uint32_t GMC : 2; /*!< GMC must be programmed only once after initialization. the number
- of packets to be serviced for that end point before moving to
- the next end point */
- uint32_t : 1;
- __IO uint32_t IFNIE : 1; /*!< Ignore frame number for isochronous endpoints */
- __IO uint32_t NBE : 1; /*!< Set NAK automatically on babble */
- __IO uint32_t ECBNA : 1; /*!< After receiving BNA interrupt, the core disables the endpoint */
- } DCTL_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DSTS; /*!< Device Status Register */
-
- struct {
- __I uint32_t SUSPEND : 1; /*!< this bit is set as long as a Suspend condition is detected on
- the USB */
- __I uint32_t SPEED : 2; /*!< Indicates the speed at which the DWC_otg core has come up after
- speed detection through a chirp sequence */
- __I uint32_t EE : 1; /*!< reason of suspend state */
- uint32_t : 4;
- __I uint32_t SOFFN : 14; /*!< Frame or Microframe Number of the Received SOF */
- __I uint32_t DLSDP : 1; /*!< Logic level of D+ */
- __I uint32_t DLSDN : 1; /*!< Logic level of D- */
- } DSTS_b; /*!< BitSize */
- };
- __I uint32_t RESERVED41;
-
- union {
- __IO uint32_t DIEPEN; /*!< Device IN Endpoint Common Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */
- __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< AHB Error Interrupt */
- __IO uint32_t TIMEOUT : 1; /*!< Timeout Condition(Non-isochronous endpoints) */
- __IO uint32_t ITRWTFE : 1; /*!< IN Token Received When TxFIFO Empty */
- __IO uint32_t ITRWEPM : 1; /*!< IN Token received with EP Mismatch */
- __IO uint32_t IENE : 1; /*!< IN Endpoint NAK Effective */
- uint32_t : 1;
- __IO uint32_t FU : 1; /*!< Fifo Underrun */
- __IO uint32_t BNA : 1; /*!< BNA Interrupt */
- uint32_t : 3;
- __IO uint32_t NAK : 1; /*!< NAK interrupt */
- } DIEPEN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DOEPEN; /*!< Device OUT Endpoint Common Interrupt Enable Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */
- __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< AHB Error Interrupt */
- __IO uint32_t SPD : 1; /*!< SETUP Phase Done, Applies to control endpoints only */
- __IO uint32_t OTRWED : 1; /*!< OUT Token Received when Endpoint Disabled, Applies to control
- OUT endpoints only */
- __IO uint32_t SPR : 1; /*!< Status Phase Received */
- __IO uint32_t BTBSPR : 1; /*!< Back-to-Back SETUP Packets Received, Applies to control OUT
- endpoints only */
- uint32_t : 1;
- __IO uint32_t OPE : 1; /*!< OUT Packet Error */
- __IO uint32_t BNA : 1; /*!< BNA Interrupt */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error interrupt */
- __IO uint32_t NAK : 1; /*!< NAK interrupt */
- __IO uint32_t NYET : 1; /*!< NYET interrupt */
- } DOEPEN_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t DAINT; /*!< Device All Channels Interrupt Register */
-
- struct {
- __I uint32_t INT : 16; /*!< IN Endpoint Interrupt Bits, from 0 to 15. */
- __I uint32_t OUT_INT : 16; /*!< OUT Endpoint Interrupt Bits, from 0 to 15. */
- } DAINT_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DAINT_EN; /*!< Device All Channels Interrupt Enable Register */
-
- struct {
- __IO uint32_t IN_EN : 16; /*!< IN EP Interrupt Enable, from 0 to 15. */
- __IO uint32_t OUT_EN : 16; /*!< OUT EP Interrupt Enable, from 0 to 15. */
- } DAINT_EN_b; /*!< BitSize */
- };
- __I uint32_t RESERVED42[4];
-
- union {
- __IO uint32_t DTHRCTL; /*!< Device Threshold Control Register */
-
- struct {
- __IO uint32_t NISOINETE : 1; /*!< Non-ISO IN Endpoints Threshold Enable */
- __IO uint32_t ISOINETE : 1; /*!< ISO IN Endpoints Threshold Enable */
- __IO uint32_t TTL : 9; /*!< This field specifies Transmit thresholding size in DWORDS */
- __IO uint32_t ATR : 2; /*!< These bits define the ratio between the AHB threshold and the
- MAC threshold for the transmit path only. */
- uint32_t : 3;
- __IO uint32_t RTE : 1; /*!< If set, the core enables thresholding in the receive direction */
- __IO uint32_t RTL : 9; /*!< This field specifies Receive thresholding size in DWORDS */
- uint32_t : 1;
- __IO uint32_t APE : 1; /*!< This bit controls internal DMA arbiter parking for IN endpoints */
- } DTHRCTL_b; /*!< BitSize */
- };
- __IO uint16_t DIEPEMPEN; /*!< Device IN Endpoint FIFO Empty Interrupt Enable Register */
- __I uint16_t RESERVED43[101];
-
- union {
- __IO uint32_t DIEPCTL0; /*!< Device Control IN Endpoint 0 Control Register */
-
- struct {
- __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint,
- applies to IN and OUT endpoints */
- uint32_t : 13;
- __I uint32_t USBAE : 1; /*!< Always 1, indicating that control endpoint 0 is always active
- in all configurations and interfaces */
- uint32_t : 1;
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint */
- __I uint32_t EP_TYPE : 2; /*!< Hardcoded to 00 for control */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< The application sets this bit, and the core clears it when a
- SETUP token is received for this endpoint */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- uint32_t : 2;
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED44;
-
- union {
- __IO uint32_t DIEPINT0; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED45;
-
- union {
- __IO uint32_t DIEPTSIZ0; /*!< Device IN Endpoint 0 Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */
- uint32_t : 12;
- __IO uint32_t PACKET_CNT : 2; /*!< the total number of USB packets */
- } DIEPTSIZ0_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA0; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA0; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED46;
- __I uint32_t DIEPDMAB0; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL1; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED47;
-
- union {
- __IO uint32_t DIEPINT1; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED48;
-
- union {
- __IO uint32_t DIEPTSIZ1; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ1_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA1; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA1; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED49;
- __I uint32_t DIEPDMAB1; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL2; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED50;
-
- union {
- __IO uint32_t DIEPINT2; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED51;
-
- union {
- __IO uint32_t DIEPTSIZ2; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ2_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA2; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA2; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED52;
- __I uint32_t DIEPDMAB2; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL3; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED53;
-
- union {
- __IO uint32_t DIEPINT3; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED54;
-
- union {
- __IO uint32_t DIEPTSIZ3; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ3_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA3; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA3; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED55;
- __I uint32_t DIEPDMAB3; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL4; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED56;
-
- union {
- __IO uint32_t DIEPINT4; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED57;
-
- union {
- __IO uint32_t DIEPTSIZ4; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ4_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA4; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA4; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED58;
- __I uint32_t DIEPDMAB4; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL5; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED59;
-
- union {
- __IO uint32_t DIEPINT5; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED60;
-
- union {
- __IO uint32_t DIEPTSIZ5; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ5_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA5; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA5; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED61;
- __I uint32_t DIEPDMAB5; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL6; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED62;
-
- union {
- __IO uint32_t DIEPINT6; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED63;
-
- union {
- __IO uint32_t DIEPTSIZ6; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ6_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA6; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA6; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED64;
- __I uint32_t DIEPDMAB6; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL7; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED65;
-
- union {
- __IO uint32_t DIEPINT7; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED66;
-
- union {
- __IO uint32_t DIEPTSIZ7; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ7_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA7; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA7; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED67;
- __I uint32_t DIEPDMAB7; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL8; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED68;
-
- union {
- __IO uint32_t DIEPINT8; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED69;
-
- union {
- __IO uint32_t DIEPTSIZ8; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ8_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA8; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA8; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED70;
- __I uint32_t DIEPDMAB8; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL9; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED71;
-
- union {
- __IO uint32_t DIEPINT9; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED72;
-
- union {
- __IO uint32_t DIEPTSIZ9; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ9_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA9; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA9; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED73;
- __I uint32_t DIEPDMAB9; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL10; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED74;
-
- union {
- __IO uint32_t DIEPINT10; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED75;
-
- union {
- __IO uint32_t DIEPTSIZ10; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ10_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA10; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA10; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED76;
- __I uint32_t DIEPDMAB10; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL11; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED77;
-
- union {
- __IO uint32_t DIEPINT11; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED78;
-
- union {
- __IO uint32_t DIEPTSIZ11; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ11_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA11; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA11; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED79;
- __I uint32_t DIEPDMAB11; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL12; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED80;
-
- union {
- __IO uint32_t DIEPINT12; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED81;
-
- union {
- __IO uint32_t DIEPTSIZ12; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ12_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA12; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA12; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED82;
- __I uint32_t DIEPDMAB12; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL13; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED83;
-
- union {
- __IO uint32_t DIEPINT13; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED84;
-
- union {
- __IO uint32_t DIEPTSIZ13; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ13_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA13; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA13; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED85;
- __I uint32_t DIEPDMAB13; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL14; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED86;
-
- union {
- __IO uint32_t DIEPINT14; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED87;
-
- union {
- __IO uint32_t DIEPTSIZ14; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ14_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA14; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA14; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED88;
- __I uint32_t DIEPDMAB14; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DIEPCTL15; /*!< Device IN Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- uint32_t : 1;
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens.
- To control endpoints, response an ACK */
- __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an
- endpoint even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- transmit is setup */
- } DIEPCTL15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED89;
-
- union {
- __IO uint32_t DIEPINT15; /*!< Device IN Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this
- endpoint */
- __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */
- __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */
- __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DIEPINT15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED90;
-
- union {
- __IO uint32_t DIEPTSIZ15; /*!< Device IN Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints.
- The number of packets must be fetched per non-periodic IN endpoints */
- } DIEPTSIZ15_b; /*!< BitSize */
- };
- __IO uint32_t DIEPDMA15; /*!< Device IN Endpoint-n DMA Address Register */
- __IO uint16_t DTXFSA15; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */
- __I uint16_t RESERVED91;
- __I uint32_t DIEPDMAB15; /*!< Device IN Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL0; /*!< Device Control OUT Endpoint 0 Control Register */
-
- struct {
- __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint,
- applies to IN and OUT endpoints */
- uint32_t : 13;
- __I uint32_t USBAE : 1; /*!< Always 1, indicating that control endpoint 0 is always active
- in all configurations and interfaces */
- uint32_t : 1;
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint */
- __I uint32_t EP_TYPE : 2; /*!< Hardcoded to 00 for control */
- __IO uint32_t SNOOP : 1; /*!< does not check if the OUT packets are correct before transferring */
- __IO uint32_t STALL : 1; /*!< The application sets this bit, and the core clears it when a
- SETUP token is received for this endpoint */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- uint32_t : 2;
- __I uint32_t EPD : 1; /*!< The application cannot disable control OUT endpoint 0 */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED92;
-
- union {
- __IO uint32_t DOEPINT0; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT0_b; /*!< BitSize */
- };
- __I uint32_t RESERVED93;
-
- union {
- __IO uint32_t DOEPTSIZ0; /*!< Device OUT Endpoint 0 Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */
- uint32_t : 12;
- __IO uint32_t PACKET_CNT : 1; /*!< This field is decremented to zero after a packet is written
- into the RxFIFO */
- uint32_t : 9;
- __IO uint32_t SETUP_CNT : 2; /*!< the number of back-to-back SETUP data packets the endpoint can
- receive */
- } DOEPTSIZ0_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA0; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED94;
- __I uint32_t DOEPDMAB0; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL1; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED95;
-
- union {
- __IO uint32_t DOEPINT1; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT1_b; /*!< BitSize */
- };
- __I uint32_t RESERVED96;
-
- union {
- __IO uint32_t DOEPTSIZ1; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ1_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA1; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED97;
- __I uint32_t DOEPDMAB1; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL2; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED98;
-
- union {
- __IO uint32_t DOEPINT2; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT2_b; /*!< BitSize */
- };
- __I uint32_t RESERVED99;
-
- union {
- __IO uint32_t DOEPTSIZ2; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ2_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA2; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED100;
- __I uint32_t DOEPDMAB2; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL3; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED101;
-
- union {
- __IO uint32_t DOEPINT3; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT3_b; /*!< BitSize */
- };
- __I uint32_t RESERVED102;
-
- union {
- __IO uint32_t DOEPTSIZ3; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ3_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA3; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED103;
- __I uint32_t DOEPDMAB3; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL4; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED104;
-
- union {
- __IO uint32_t DOEPINT4; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT4_b; /*!< BitSize */
- };
- __I uint32_t RESERVED105;
-
- union {
- __IO uint32_t DOEPTSIZ4; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ4_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA4; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED106;
- __I uint32_t DOEPDMAB4; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL5; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED107;
-
- union {
- __IO uint32_t DOEPINT5; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT5_b; /*!< BitSize */
- };
- __I uint32_t RESERVED108;
-
- union {
- __IO uint32_t DOEPTSIZ5; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ5_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA5; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED109;
- __I uint32_t DOEPDMAB5; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL6; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED110;
-
- union {
- __IO uint32_t DOEPINT6; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT6_b; /*!< BitSize */
- };
- __I uint32_t RESERVED111;
-
- union {
- __IO uint32_t DOEPTSIZ6; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ6_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA6; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED112;
- __I uint32_t DOEPDMAB6; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL7; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED113;
-
- union {
- __IO uint32_t DOEPINT7; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT7_b; /*!< BitSize */
- };
- __I uint32_t RESERVED114;
-
- union {
- __IO uint32_t DOEPTSIZ7; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ7_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA7; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED115;
- __I uint32_t DOEPDMAB7; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL8; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED116;
-
- union {
- __IO uint32_t DOEPINT8; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT8_b; /*!< BitSize */
- };
- __I uint32_t RESERVED117;
-
- union {
- __IO uint32_t DOEPTSIZ8; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ8_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA8; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED118;
- __I uint32_t DOEPDMAB8; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL9; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED119;
-
- union {
- __IO uint32_t DOEPINT9; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT9_b; /*!< BitSize */
- };
- __I uint32_t RESERVED120;
-
- union {
- __IO uint32_t DOEPTSIZ9; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ9_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA9; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED121;
- __I uint32_t DOEPDMAB9; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL10; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED122;
-
- union {
- __IO uint32_t DOEPINT10; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT10_b; /*!< BitSize */
- };
- __I uint32_t RESERVED123;
-
- union {
- __IO uint32_t DOEPTSIZ10; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ10_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA10; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED124;
- __I uint32_t DOEPDMAB10; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL11; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED125;
-
- union {
- __IO uint32_t DOEPINT11; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT11_b; /*!< BitSize */
- };
- __I uint32_t RESERVED126;
-
- union {
- __IO uint32_t DOEPTSIZ11; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ11_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA11; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED127;
- __I uint32_t DOEPDMAB11; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL12; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED128;
-
- union {
- __IO uint32_t DOEPINT12; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT12_b; /*!< BitSize */
- };
- __I uint32_t RESERVED129;
-
- union {
- __IO uint32_t DOEPTSIZ12; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ12_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA12; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED130;
- __I uint32_t DOEPDMAB12; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL13; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED131;
-
- union {
- __IO uint32_t DOEPINT13; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT13_b; /*!< BitSize */
- };
- __I uint32_t RESERVED132;
-
- union {
- __IO uint32_t DOEPTSIZ13; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ13_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA13; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED133;
- __I uint32_t DOEPDMAB13; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL14; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED134;
-
- union {
- __IO uint32_t DOEPINT14; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT14_b; /*!< BitSize */
- };
- __I uint32_t RESERVED135;
-
- union {
- __IO uint32_t DOEPTSIZ14; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ14_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA14; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED136;
- __I uint32_t DOEPDMAB14; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-
- union {
- __IO uint32_t DOEPCTL15; /*!< Device OUT Endpoint N Control Register */
-
- struct {
- __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */
- uint32_t : 4;
- __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */
- __I uint32_t DPID : 1; /*!< Endpoint Data PID */
- __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if
- set */
- __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */
- __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */
- __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens.
- To control endpoints, response an ACK */
- uint32_t : 4;
- __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */
- __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */
- __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */
- __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */
- __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint
- even before the transfer for that endpoint is complete */
- __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to
- receive data is setup */
- } DOEPCTL15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED137;
-
- union {
- __IO uint32_t DOEPINT15; /*!< Device OUT Endpoint-n Interrupt Register */
-
- struct {
- __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */
- __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */
- __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */
- __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control
- endpoint is complete */
- __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */
- __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data
- phase to the status phase of a Control Write transfer */
- __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back
- SETUP packets for this particular endpoint */
- __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */
- __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */
- __IO uint32_t BNA : 1; /*!< Buffer Not Available */
- uint32_t : 2;
- __IO uint32_t BE : 1; /*!< Babble Error */
- __IO uint32_t NAK : 1; /*!< a NAK is transmitted */
- __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */
- } DOEPINT15_b; /*!< BitSize */
- };
- __I uint32_t RESERVED138;
-
- union {
- __IO uint32_t DOEPTSIZ15; /*!< Device OUT Endpoint-n Transfer Size Register */
-
- struct {
- __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */
- __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */
- __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets.
- To isochronous OUT endpoints, data PID received in the last
- packet */
- } DOEPTSIZ15_b; /*!< BitSize */
- };
- __IO uint32_t DOEPDMA15; /*!< Device OUT Endpoint-n DMA Address Register */
- __I uint32_t RESERVED139;
- __I uint32_t DOEPDMAB15; /*!< Device OUT Endpoint-n DMA Buffer Address Register */
-} USB_Type;
-
-
-/* ================================================================================ */
-/* ================ GLOBAL_CTRL ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief GLOBAL_CTRL (GLOBAL_CTRL)
- */
-
-typedef struct { /*!< GLOBAL_CTRL Structure */
-
- union {
- __I uint32_t AES_STATUS; /*!< AES status */
-
- struct {
- __I uint32_t RD_ALMOST_EMPTY: 1; /*!< FIFO read almost empty */
- __I uint32_t RD_EMPTY : 1; /*!< FIFO read empty */
- __I uint32_t WR_FULL_ALMOST: 1; /*!< FIFO write almost full */
- __I uint32_t WR_FULL : 1; /*!< FIFO write full */
- __I uint32_t IDLE : 1; /*!< decryption finish */
- } AES_STATUS_b; /*!< BitSize */
- };
- __I uint32_t RESERVED0[253];
-
- union {
- __IO uint32_t CLK_SEL_0; /*!< clock select 0 */
-
- struct {
- __IO uint32_t CAN1_CLK : 2; /*!< CAN1 clock frequency dividor based on system clock, which should
- be 1/32, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t CAN0_CLK : 2; /*!< CAN0 clock frequency dividor based on system clock, which should
- be 1/32, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t I2C1_CLK : 2; /*!< I2C1 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t I2C0_CLK : 2; /*!< I2C0 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t SPI1_CLK : 2; /*!< SPI1 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t SPI0_CLK : 2; /*!< SPI0 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t UART1_CLK : 2; /*!< UART1 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t UART0_CLK : 2; /*!< UART0 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t RTC_CLK : 2; /*!< RTC clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t GPIO_CLK : 2; /*!< GPIO clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t TIMER_CLK : 2; /*!< TIMER clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t WDG_CLK : 2; /*!< watchdog clock frequency dividor based on system clock, which
- should be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- uint32_t : 2;
- __IO uint32_t FLASH_CLK : 2; /*!< FLASH clock frequency dividor based on system clock, which should
- be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */
- __IO uint32_t DMA_AHB_CLK: 2; /*!< DMA AHB bus clock frequency dividor based on system clock, which
- should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */
- __IO uint32_t USB_AHB_CLK: 2; /*!< USB AHB bus clock frequency dividor based on system clock, which
- should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */
- } CLK_SEL_0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CLK_SEL_1; /*!< clock select 1 */
-
- struct {
- __IO uint32_t ETH_AHB_CLK: 2; /*!< ETH_AHB clock frequency dividor based on system clock, which
- should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */
- __IO uint32_t DDR_CLK : 2; /*!< DDR clock frequency dividor based on system clock, which should
- be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */
- uint32_t : 4;
- __IO uint32_t ADC_CLK : 2; /*!< ADC clock frequency dividor based on system clock, which should
- be 1/8, 1/16, 1/32, external from 0 to 3 */
- __IO uint32_t EFUSE_CLK : 2; /*!< EFUSE clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t SYS_CLK : 4; /*!< system clock clock frequency dividor based on system clock,
- which should be oscillator(0), DLL(1), crystal(2), external(3),
- JTAG(4), PS(8) */
- __IO uint32_t UART2_CLK : 2; /*!< UART2 clock frequency dividor based on system clock, which should
- be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */
- __IO uint32_t UTMI_CLK : 1; /*!< UTMI clock came from on-chip usb phy(0) or off-chip usb phy(1) */
- } CLK_SEL_1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t USB_PHY_CTRL; /*!< USB Phy Control Register */
-
- struct {
- __IO uint32_t BITSTUFF : 1; /*!< 0: No bit stuff */
- __IO uint32_t XTLSEL : 1; /*!< 0: 12MHz */
- __IO uint32_t PLL : 1; /*!< PLL mode */
- __IO uint32_t VOLDET : 1; /*!< Voltage Detector Enable, 0: Disable */
- __IO uint32_t IDUP : 1; /*!< 0: ID is uplled up through 33k Ohm resister */
- __IO uint32_t CKISEL : 1; /*!< Clock selection, 0: Crystal, 1: Internal Clock */
- __IO uint32_t FMOD : 1; /*!< 1: Normal */
- __IO uint32_t SQUELCH : 3; /*!< Squelch Reference Voltage, 000: 27.5mV, 001: 137.5mV, 111: 220mV */
- __IO uint32_t HDISCDT : 3; /*!< Host Disconnect Detection Reference Voltage, 000: 500mV, 100:
- 588mV, 111: 654mV */
- __IO uint32_t PRTSEL : 1; /*!< 0: Internal OTG PHY, 1: UTMI to External PHY */
- __IO uint32_t RSTPRT : 1; /*!< 0: The reverse of usb_rst_n will reset, 1: Reset OTG PHY */
- } USB_PHY_CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RTC_INT_EN; /*!< RTC interrupt enable Register */
-
- struct {
- __IO uint32_t SECOND : 1; /*!< 1s interrupt enable */
- __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt enable */
- } RTC_INT_EN_b; /*!< BitSize */
- };
- __I uint32_t RESERVED1;
-
- union {
- __IO uint32_t NMI_SEL; /*!< nmi interrupt selection */
-
- struct {
- __IO uint32_t NMI : 7; /*!< NMI interrupt ID */
- } NMI_SEL_b; /*!< BitSize */
- };
- __I uint32_t RESERVED2;
- __IO uint32_t AES_TARGET_ADDR; /*!< AES target address, default is frame decoder address(0x41800000) */
-
- union {
- __IO uint32_t AES_BURST_TYPE; /*!< AES burst type */
-
- struct {
- __IO uint32_t TYPE : 2; /*!< burst type, fixed(0), incr(1) */
- } AES_BURST_TYPE_b; /*!< BitSize */
- };
- __I uint32_t RESERVED3[3];
-
- union {
- __IO uint32_t ICACHE; /*!< ICACHE Enable */
-
- struct {
- __IO uint32_t EN : 1; /*!< ICACHE Enable */
- } ICACHE_b; /*!< BitSize */
- };
- __IO uint32_t IBUSOFF; /*!< Code Bus Offset */
- __IO uint32_t DBUSOFF; /*!< Data Bus Offset */
- __IO uint32_t EXTADDR; /*!< Bus Ext Addr */
-} GLOBAL_CTRL_Type;
-
-
-/* ================================================================================ */
-/* ================ AES ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief AES (AES)
- */
-
-typedef struct { /*!< AES Structure */
- __IO uint32_t FIFO; /*!< data FIFO to be decoded */
-
- union {
- __O uint32_t FIFO_CLEAR; /*!< clear data FIFO */
-
- struct {
- __O uint32_t CLEAR : 1; /*!< clear after write 1 and write 0 */
- } FIFO_CLEAR_b; /*!< BitSize */
- };
-} AES_Type;
-
-
-/* ================================================================================ */
-/* ================ DDRC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief DDR_CFG (DDRC)
- */
-
-typedef struct { /*!< DDRC Structure */
- __IO uint32_t CMD; /*!< DDR commands to program */
-
- union {
- __IO uint32_t CTRL; /*!< DDR Control */
-
- struct {
- __IO uint32_t TO : 1; /*!< Take over DDRC siggen */
- __IO uint32_t CLR : 1; /*!< Clear commands in FIFO */
- __O uint32_t STR : 1; /*!< Start to execute the commands in FIFO */
- } CTRL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t MODE; /*!< DDR mode */
-
- struct {
- __IO uint32_t MODE : 6; /*!< DDRC Mode */
- uint32_t : 2;
- __IO uint32_t LANE : 1; /*!< LANE synchronization logic bypass */
- uint32_t : 3;
- __IO uint32_t ADEC : 1; /*!< address decoder mapping */
- uint32_t : 3;
- __IO uint32_t B16 : 2; /*!< Active 16 bit DQ position when the unmber of DQ IO is 16 */
- uint32_t : 6;
- __IO uint32_t CLKPOL : 2; /*!< DQS clkpol set by user on the PHY */
- } MODE_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t QUE; /*!< DDRC queue depth */
-
- struct {
- __IO uint32_t DEPTH : 1; /*!< DDRC queue depth */
- } QUE_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t REF; /*!< Refresh control */
-
- struct {
- __IO uint32_t THRD : 5; /*!< Number of refresh requests which can be postponed */
- uint32_t : 3;
- __IO uint32_t TRIG : 4; /*!< Number of refresh requests every dl_refi */
- uint32_t : 4;
- __IO uint32_t TIME : 16; /*!< Refresh interval time */
- } REF_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t REF_TRIG; /*!< Refresh trigger */
-
- struct {
- __O uint32_t GO : 1; /*!< Write 1 to trigger one refresh request by cbus */
- } REF_TRIG_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ZQ_TRIG; /*!< ZQCTL trigger */
-
- struct {
- __O uint32_t CS : 1; /*!< Write 1 to trigger one ZQCS request by cbus */
- __O uint32_t CL : 1; /*!< Write 1 to trigger one ZQCL request by cbus */
- } ZQ_TRIG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ZQCSR; /*!< ZQCSR */
-
- struct {
- __IO uint32_t EN : 1; /*!< Enable ZQCS request */
- __IO uint32_t PRI : 1; /*!< 0: DMA access prior to ZQCS, 1: ZQCS prior to DMA access */
- } ZQCSR_b; /*!< BitSize */
- };
- __IO uint32_t ZQCSI; /*!< ZQCS interval time */
-
- union {
- __IO uint32_t RCD; /*!< t(RCD) */
-
- struct {
- __IO uint32_t DI : 5; /*!< t(RCD), delay from ACT command to RW command of same bank */
- } RCD_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RAS; /*!< t(RAS) */
-
- struct {
- __IO uint32_t DI : 6; /*!< t(RAS), delay from ACT command to PRE command of same bank */
- } RAS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RP; /*!< t(RP) */
-
- struct {
- __IO uint32_t DI : 5; /*!< t(RP), delay from PRE command to ACT/REF/ZQ command */
- uint32_t : 3;
- __IO uint32_t RPA : 1; /*!< 0: t(RP) delay for PREA command; 1: t(RP)+1 delay for PREA command */
- } RP_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RC; /*!< t(RC) */
-
- struct {
- __IO uint32_t DI : 7; /*!< t(RC), delay from ACT command to ACT command of same bank */
- } RC_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RRD; /*!< t(RRD) */
-
- struct {
- __IO uint32_t DI : 4; /*!< t(RRD), delay from ACT command to ACT command */
- } RRD_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t CCD; /*!< t(CCD) */
-
- struct {
- __IO uint32_t DI : 3; /*!< t(CCD), delay from RW command to RW command */
- } CCD_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RTW; /*!< t(RTW) */
-
- struct {
- __IO uint32_t DI : 5; /*!< t(RTW), delay from RD command to WR command */
- } RTW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t WTR; /*!< t(WTR) */
-
- struct {
- __IO uint32_t DI : 5; /*!< t(WTR), delay from WR command to RD command */
- } WTR_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RTP; /*!< t(RTP) */
-
- struct {
- __IO uint32_t DI : 3; /*!< t(RTP), delay from RD command to PRE command of same bank */
- } RTP_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t WTP; /*!< t(WTP) */
-
- struct {
- __IO uint32_t DI : 6; /*!< t(WTP), delay from WR command to PRE command of same bank */
- } WTP_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RFC; /*!< t(RFC) */
-
- struct {
- __IO uint32_t DI : 8; /*!< t(WTP), delay from WR command to PRE command of same bank */
- } RFC_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ZQCL; /*!< t(ZQoper) */
-
- struct {
- __IO uint32_t DI : 9; /*!< t(ZQoper), delay from ZQCL command to REF/ZQ/ACT command */
- } ZQCL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ZQCS; /*!< t(ZQCS) */
-
- struct {
- __IO uint32_t DI : 7; /*!< t(ZQCS), delay from ZQCS command to REF/ZQ/ACT command */
- } ZQCS_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t FAW; /*!< t(FAW) */
-
- struct {
- __IO uint32_t DI : 6; /*!< t(FAW), 4 act command window time */
- } FAW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t BURST; /*!< BURST */
-
- struct {
- __IO uint32_t LEN : 1; /*!< 0: length 8, 1: length 4 */
- } BURST_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PHUNG; /*!< PHUNG */
-
- struct {
- __IO uint32_t MODE : 1; /*!< 0: normal mode, 1: prevent read hang mode */
- __IO uint32_t LPM : 1; /*!< 1: stop the IO clk */
- } PHUNG_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RL; /*!< READ Latency */
-
- struct {
- __IO uint32_t VAL : 5; /*!< READ Latency */
- } RL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t WL; /*!< WRITE Latency */
-
- struct {
- __IO uint32_t VAL : 5; /*!< WRITE Latency */
- } WL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TRAIN; /*!< TRAIN */
-
- struct {
- __IO uint32_t EN : 4; /*!< Enable lane N training mode */
- } TRAIN_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DQSEN0; /*!< Delay cycles of dqsen of byte lane 0 */
-
- struct {
- __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 0 */
- } DQSEN0_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DQSEN1; /*!< Delay cycles of dqsen of byte lane 1 */
-
- struct {
- __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 1 */
- } DQSEN1_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DQSEN2; /*!< Delay cycles of dqsen of byte lane 2 */
-
- struct {
- __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 2 */
- } DQSEN2_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t DQSEN3; /*!< Delay cycles of dqsen of byte lane 0 */
-
- struct {
- __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 3 */
- } DQSEN3_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ODTH; /*!< Delay from WR command to odt high transition */
-
- struct {
- __IO uint32_t DL : 5; /*!< Delay from WR command to odt high transition */
- } ODTH_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ODTL; /*!< Delay from WR command to odt low transition */
-
- struct {
- __IO uint32_t DL : 5; /*!< Delay from WR command to odt low transition */
- } ODTL_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t ODT; /*!< Used in write leveling mode */
-
- struct {
- __O uint32_t TRIG : 1; /*!< 0: trigger odt low, 1: trigger odt high */
- } ODT_b; /*!< BitSize */
- };
-
- union {
- __O uint32_t DQS; /*!< Used in write leveling mode */
-
- struct {
- __O uint32_t TRIG : 1; /*!< Writing 1 to this register triggers a dqs pulse */
- } DQS_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t STA; /*!< Commands FIFO */
-
- struct {
- __I uint32_t MODE : 1; /*!< DDRC in sw_proc mode */
- __I uint32_t EMPTY : 1; /*!< Sw_proc command fifo empty */
- __I uint32_t FULL : 1; /*!< Sw_proc command fifo full */
- } STA_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INTCTL; /*!< Interrupt Control */
-
- struct {
- __IO uint32_t DONE : 1; /*!< 0: the sw_proc_done int will not be masked, 1: the sw_proc_done
- int will be masked */
- __IO uint32_t ERR : 1; /*!< mask of the lane_sync_error interrupt */
- uint32_t : 14;
- __IO uint32_t MODE : 1; /*!< Interrupt mode: 0: int level active, write 1 to clear; 1: int
- edge active */
- } INTCTL_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INTRAW; /*!< Interrupt RAW */
-
- struct {
- __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done before mask */
- __IO uint32_t ERR : 1; /*!< int reg of the lane sync error before masked */
- } INTRAW_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t INTSTA; /*!< Interrupt STA */
-
- struct {
- __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done after mask */
- __IO uint32_t ERR : 1; /*!< int register of lane sync error after masked */
- } INTSTA_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t PHY; /*!< PHY */
-
- struct {
- __IO uint32_t RST : 1; /*!< FPGA version, reset read dq fifo. Low active */
- } PHY_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RDQ; /*!< FPGA version, read dq delay of byte lane N */
-
- struct {
- __IO uint32_t L3 : 6; /*!< FPGA version, read dq delay of byte lane3 */
- uint32_t : 2;
- __IO uint32_t L2 : 6; /*!< FPGA version, read dq delay of byte lane2 */
- uint32_t : 2;
- __IO uint32_t L1 : 6; /*!< FPGA version, read dq delay of byte lane3 */
- uint32_t : 2;
- __IO uint32_t L0 : 7; /*!< FPGA version, read dq delay of byte lane0 */
- } RDQ_b; /*!< BitSize */
- };
-
- union {
- __I uint32_t CALIB; /*!< calibration */
-
- struct {
- __I uint32_t TPU : 8; /*!< calibration result values, if fail then 0x40 */
- __I uint32_t TPD : 8; /*!< calibration result values, if fail then 0x40 */
- __I uint32_t PDR : 5; /*!< calibration result values, if fail then 0x40 */
- __I uint32_t NDR : 5; /*!< calibration result values, if fail then 0x40 */
- uint32_t : 5;
- __IO uint32_t EN : 1; /*!< trigger the calibration processing which is sensitive to the
- positive edge */
- } CALIB_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t ITMDLY; /*!< "itmdly" is the fine delay trim to the read path "dq", "itmsdly"
- is to the read path of "dqs". From 000 to 111 increasingly,
- each step is about 40ps */
-
- struct {
- __IO uint32_t I0 : 4; /*!< itmdly0 */
- __IO uint32_t IS0 : 4; /*!< itmsdly0 */
- __IO uint32_t I1 : 4; /*!< itmdly1 */
- __IO uint32_t IS1 : 4; /*!< itmsdly1 */
- __IO uint32_t I2 : 4; /*!< itmdly2 */
- __IO uint32_t IS2 : 4; /*!< itmsdly2 */
- __IO uint32_t I3 : 4; /*!< itmdly3 */
- __IO uint32_t IS3 : 4; /*!< itmsdly3 */
- } ITMDLY_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t TUNE; /*!< CALIB_TUNE */
-
- struct {
- __IO uint32_t TPU : 4; /*!< tpu_tune, finial val = tune[3] ? val - tune : val + tune */
- __IO uint32_t TPD : 4; /*!< tpd_tune, tune[3:0] for TPD/TPU, [2:0] is the tune val */
- __IO uint32_t PDR : 4; /*!< pdr_tune, inial val = tune[2] ? val - tune : val + tune */
- __IO uint32_t NDR : 4; /*!< ndr_tune, tune[2:0] for NDR/PDR, [1:0] is the tune val */
- } TUNE_b; /*!< BitSize */
- };
-
- union {
- __IO uint32_t RD_SEL; /*!< RD_WINDOWS_SEL */
-
- struct {
- __IO uint32_t PHY_SEL : 3; /*!< To fix the phy read valid issue, this is to adjust the read
- data valid window to match the phy read valid by cycle level */
- } RD_SEL_b; /*!< BitSize */
- };
-} DDRC_Type;
-
-
-/* ================================================================================ */
-/* ================ PDLOCK ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief PLL DLL LOCK (PDLOCK)
- */
-
-typedef struct { /*!< PDLOCK Structure */
-
- union {
- __I uint32_t GCLK; /*!< GCLK */
-
- struct {
- __I uint32_t C1R2P : 1; /*!< gclk_c1r2_pll_lock */
- __I uint32_t C1R1P : 1; /*!< gclk_c1r1_pll_lock */
- __I uint32_t C2R1P : 1; /*!< gclk_c2r1_pll_lock */
- __I uint32_t C2R2P : 1; /*!< gclk_c2r2_pll_lock */
- __I uint32_t C1R2D : 1; /*!< gclk_c1r2_dll_lock */
- __I uint32_t C1R1D : 1; /*!< gclk_c1r1_dll_lock */
- __I uint32_t C2R1D : 1; /*!< gclk_c2r1_dll_lock */
- __I uint32_t C2R2D : 1; /*!< gclk_c2r2_dll_lock */
- } GCLK_b; /*!< BitSize */
- };
-} PDLOCK_Type;
-
-
-/* ================================================================================ */
-/* ================ PDPROT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief PLL DLL PROTECT (PDPROT)
- */
-
-typedef struct { /*!< PDPROT Structure */
-
- union {
- __O uint32_t LOCK; /*!< LOCK */
-
- struct {
- __O uint32_t EN : 1; /*!< Enable the PLL DLL Lock to Protect it */
- } LOCK_b; /*!< BitSize */
- };
-} PDPROT_Type;
-
-
-/* ================================================================================ */
-/* ================ CFG_CTRL ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief CFG_CTRL (CFG_CTRL)
- */
-
-typedef struct { /*!< CFG_CTRL Structure */
- __I uint32_t RESERVED0[3];
-
- union {
- __IO uint32_t DONE; /*!< DONE CFG */
-
- struct {
- __IO uint32_t CMD : 1; /*!< Write 1 indicate all chain data write over */
- __IO uint32_t STA : 1; /*!< 1= all chain config process over, chip is in user mode */
- } DONE_b; /*!< BitSize */
- };
- __I uint32_t RESERVED1[34];
-
- union {
- __IO uint32_t PDLLSTR; /*!< PLL DLL RESET */
-
- struct {
- __IO uint32_t C1R1P : 1; /*!< C1r1_rstpll_n, low active */
- __IO uint32_t C1R2P : 1; /*!< C1r2_rstpll_n, low active */
- __IO uint32_t C2R1P : 1; /*!< C2r1_rstpll_n, low active */
- __IO uint32_t C2R2P : 1; /*!< C2r2_rstpll_n, low active */
- __IO uint32_t C1R1D : 1; /*!< C1r1_rstdll_n, low active */
- __IO uint32_t C1R2D : 1; /*!< C1r2_rstdll_n, low active */
- __IO uint32_t C2R1D : 1; /*!< C2r1_rstdll_n, low active */
- __IO uint32_t C2R2D : 1; /*!< C2r2_rstdll_n, low active */
- } PDLLSTR_b; /*!< BitSize */
- };
-} CFG_CTRL_Type;
-
-
-/* ================================================================================ */
-/* ================ SOFT_RESET ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SUB SOFT RESET (SOFT_RESET)
- */
-
-typedef struct { /*!< SOFT_RESET Structure */
-
- union {
- __IO uint32_t SOFTRST; /*!< SOFTRST */
-
- struct {
- __IO uint32_t CAN1_n : 1; /*!< soft_rst_can1_n */
- __IO uint32_t CAN0_n : 1; /*!< soft_rst_can0_n */
- __IO uint32_t I2C1_n : 1; /*!< soft_rst_i2c1_n */
- __IO uint32_t I2C0_n : 1; /*!< soft_rst_i2c0_n */
- __IO uint32_t SPI1_n : 1; /*!< soft_rst_spi1_n */
- __IO uint32_t SPI0_n : 1; /*!< soft_rst_spi0_n */
- __IO uint32_t UART1_n : 1; /*!< soft_rst_uart1_n */
- __IO uint32_t UART0_n : 1; /*!< soft_rst_uart0_n */
- __IO uint32_t RTC_n : 1; /*!< soft_rst_rtc_n */
- __IO uint32_t GPIO_n : 1; /*!< soft_rst_gpio_n */
- __IO uint32_t TIMER_n : 1; /*!< soft_rst_timer_n */
- __IO uint32_t WDT_n : 1; /*!< soft_rst_wdt_n */
- __IO uint32_t LVDS_n : 1; /*!< soft_rst_lvds_n */
- __IO uint32_t FLS_n : 1; /*!< soft_rst_fls_n */
- __IO uint32_t DMAC_AHB_n : 1; /*!< soft_rst_dmac_ahb_n */
- __IO uint32_t USB_AHB_n : 1; /*!< soft_rst_usb_ahb_n */
- __IO uint32_t ETH_AHB_n : 1; /*!< soft_rst_eth_ahb_n */
- __IO uint32_t DDRC_n : 1; /*!< soft_rst_ddrc_n */
- __IO uint32_t ARM_HCLK_n : 1; /*!< soft_rst_arm_HCLK_n */
- __IO uint32_t _48_n : 1; /*!< soft_rst_48_n */
- __IO uint32_t UTM_n : 1; /*!< soft_rst_utmi_n */
- __IO uint32_t CACHE_n : 1; /*!< soft_rst_cache_n */
- __IO uint32_t USB_n : 1; /*!< soft_rst_cache_n */
- __IO uint32_t ETH_RX_n : 1; /*!< soft_rst_eth_rx_i_n */
- __IO uint32_t ETH_TX_n : 1; /*!< soft_rst_eth_tx_i_n */
- __IO uint32_t ADC_n : 1; /*!< soft_rst_adc_n */
- __IO uint32_t EFUSE_n : 1; /*!< soft_rst_efuse_n */
- __IO uint32_t Reserved1_n: 1; /*!< Reserved11 */
- __IO uint32_t AES_n : 1; /*!< soft_rst_aes_n */
- __IO uint32_t UART2_n : 1; /*!< soft_rst_uart2_n */
- __IO uint32_t AS_n : 1; /*!< soft_rst_as_n */
- __IO uint32_t FDCD_n : 1; /*!< soft_rst_fdcd_n */
- } SOFTRST_b; /*!< BitSize */
- };
-} SOFT_RESET_Type;
-
-
-/* -------------------- End of section using anonymous unions ------------------- */
-#if defined(__CC_ARM)
- #pragma pop
-#elif defined(__ICCARM__)
- /* leave anonymous unions enabled */
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
- /* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning restore
-#else
- #warning Not supported compiler type
-#endif
-
-
-
-
-/* ================================================================================ */
-/* ================ Peripheral memory map ================ */
-/* ================================================================================ */
-
-#define UART0_BASE 0x41005000UL
-#define UART1_BASE 0x4100C000UL
-#define UART2_BASE 0x4100E000UL
-#define WDG_BASE 0x41001000UL
-#define TIMER0_BASE 0x41000000UL
-#define TIMER1_BASE 0x41000020UL
-#define TIMER2_BASE 0x41000040UL
-#define TIMER3_BASE 0x41000060UL
-#define SPI0_BASE 0x41004000UL
-#define SPI1_BASE 0x4100B000UL
-#define I2C0_BASE 0x41003000UL
-#define I2C1_BASE 0x4100A000UL
-#define RTC_BASE 0x41007004UL
-#define GPIO_BASE 0x41002000UL
-#define NOR_FLASH_BASE 0x40800000UL
-#define ADC_BASE 0x41006000UL
-#define EFUSE_BASE 0x41008000UL
-#define CAN0_BASE 0x41009000UL
-#define CAN1_BASE 0x4100D000UL
-#define DMA_BASE 0x41500000UL
-#define ETH_BASE 0x41200000UL
-#define USB_BASE 0x41300000UL
-#define GLOBAL_CTRL_BASE 0x41007010UL
-#define AES_BASE 0x41600000UL
-#define DDRC_BASE 0x41400000UL
-#define PDLOCK_BASE 0x41007000UL
-#define PDPROT_BASE 0x41007C00UL
-#define CFG_CTRL_BASE 0x41700000UL
-#define SOFT_RESET_BASE 0x41007400UL
-
-
-/* ================================================================================ */
-/* ================ Peripheral declaration ================ */
-/* ================================================================================ */
-
-#define UART0 ((UART0_Type *) UART0_BASE)
-#define UART1 ((UART0_Type *) UART1_BASE)
-#define UART2 ((UART0_Type *) UART2_BASE)
-#define WDG ((WDG_Type *) WDG_BASE)
-#define TIMER0 ((TIMER0_Type *) TIMER0_BASE)
-#define TIMER1 ((TIMER0_Type *) TIMER1_BASE)
-#define TIMER2 ((TIMER0_Type *) TIMER2_BASE)
-#define TIMER3 ((TIMER0_Type *) TIMER3_BASE)
-#define SPI0 ((SPI0_Type *) SPI0_BASE)
-#define SPI1 ((SPI0_Type *) SPI1_BASE)
-#define I2C0 ((I2C0_Type *) I2C0_BASE)
-#define I2C1 ((I2C0_Type *) I2C1_BASE)
-#define RTC ((RTC_Type *) RTC_BASE)
-#define GPIO ((GPIO_Type *) GPIO_BASE)
-#define NOR_FLASH ((NOR_FLASH_Type *) NOR_FLASH_BASE)
-#define ADC ((ADC_Type *) ADC_BASE)
-#define EFUSE ((EFUSE_Type *) EFUSE_BASE)
-#define CAN0 ((CAN0_Type *) CAN0_BASE)
-#define CAN1 ((CAN0_Type *) CAN1_BASE)
-#define DMA ((DMA_Type *) DMA_BASE)
-#define ETH ((ETH_Type *) ETH_BASE)
-#define USB ((USB_Type *) USB_BASE)
-#define GLOBAL_CTRL ((GLOBAL_CTRL_Type *) GLOBAL_CTRL_BASE)
-#define AES ((AES_Type *) AES_BASE)
-#define DDRC ((DDRC_Type *) DDRC_BASE)
-#define PDLOCK ((PDLOCK_Type *) PDLOCK_BASE)
-#define PDPROT ((PDPROT_Type *) PDPROT_BASE)
-#define CFG_CTRL ((CFG_CTRL_Type *) CFG_CTRL_BASE)
-#define SOFT_RESET ((SOFT_RESET_Type *) SOFT_RESET_BASE)
-
-
-/** @} */ /* End of group Device_Peripheral_Registers */
-/** @} */ /* End of group cmem7 */
-/** @} */ /* End of group (null) */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* cmem7_H */
-
+ +/****************************************************************************************************//** + * @file cmem7.h + * + * @brief CMSIS Cortex-M3 Peripheral Access Layer Header File for + * cmem7 from <unknown Vendor>. + * + * @version V1.0 + * @date 5. January 2015 + * + * @note Generated with SVDConv V2.75 + * from CMSIS SVD File 'SVDConv_CME_M7.svd' Version 1.0, + *******************************************************************************************************/ + + + +/** @addtogroup (null) + * @{ + */ + +/** @addtogroup cmem7 + * @{ + */ + +#ifndef CMEM7_H +#define CMEM7_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* ------------------------- Interrupt Number Definition ------------------------ */ + +typedef enum { +/* ------------------- Cortex-M3 Processor Exceptions Numbers ------------------- */ + Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ + HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ + MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation + and No Match */ + BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory + related Fault */ + UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */ + SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ + DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ + PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ + SysTick_IRQn = -1, /*!< 15 System Tick Timer */ +/* ---------------------- cmem7 Specific Interrupt Numbers ---------------------- */ + ETH_INT_IRQn = 0, /*!< 0 ETH_INT */ + USB_INT_IRQn = 1, /*!< 1 USB_INT */ + DMA_INT_IRQn = 2, /*!< 2 DMA_INT */ + CAN0_INT_IRQn = 3, /*!< 3 CAN0_INT */ + CAN1_INT_IRQn = 4, /*!< 4 CAN1_INT */ + FP0_INT_IRQn = 5, /*!< 5 FP0_INT */ + FP1_INT_IRQn = 6, /*!< 6 FP1_INT */ + FP2_INT_IRQn = 7, /*!< 7 FP2_INT */ + FP3_INT_IRQn = 8, /*!< 8 FP3_INT */ + FP4_INT_IRQn = 9, /*!< 9 FP4_INT */ + FP5_INT_IRQn = 10, /*!< 10 FP5_INT */ + FP6_INT_IRQn = 11, /*!< 11 FP6_INT */ + FP7_INT_IRQn = 12, /*!< 12 FP7_INT */ + FP8_INT_IRQn = 13, /*!< 13 FP8_INT */ + FP9_INT_IRQn = 14, /*!< 14 FP9_INT */ + FP10_INT_IRQn = 15, /*!< 15 FP10_INT */ + FP11_INT_IRQn = 16, /*!< 16 FP11_INT */ + FP12_INT_IRQn = 17, /*!< 17 FP12_INT */ + FP13_INT_IRQn = 18, /*!< 18 FP13_INT */ + FP14_INT_IRQn = 19, /*!< 19 FP14_INT */ + FP15_INT_IRQn = 20, /*!< 20 FP15_INT */ + UART0_INT_IRQn = 21, /*!< 21 UART0_INT */ + UART1_INT_IRQn = 22, /*!< 22 UART1_INT */ + ADC_INT_IRQn = 23, /*!< 23 ADC_INT */ + GPIO_INT_IRQn = 24, /*!< 24 GPIO_INT */ + SPI1_INT_IRQn = 25, /*!< 25 SPI1_INT */ + I2C1_INT_IRQn = 26, /*!< 26 I2C1_INT */ + SPI0_INT_IRQn = 27, /*!< 27 SPI0_INT */ + I2C0_INT_IRQn = 28, /*!< 28 I2C0_INT */ + RTC_1S_INT_IRQn = 29, /*!< 29 RTC_1S_INT */ + RTC_1MS_INT_IRQn = 30, /*!< 30 RTC_1MS_INT */ + WDG_INT_IRQn = 31, /*!< 31 WDG_INT */ + TIMER_INT_IRQn = 32, /*!< 32 TIMER_INT */ + DDRC_SW_PROC_IRQn = 33, /*!< 33 DDRC_SW_PROC */ + ETH_PMT_INT_IRQn = 34, /*!< 34 ETH_PMT_INT */ + PAD_INT_IRQn = 35, /*!< 35 PAD_INT */ + DDRC_LANE_SYNC_IRQn = 36, /*!< 36 DDRC_LANE_SYNC */ + UART2_INT_IRQn = 37 /*!< 37 UART2_INT */ +} IRQn_Type; + + +/** @addtogroup Configuration_of_CMSIS + * @{ + */ + + +/* ================================================================================ */ +/* ================ Processor and Core Peripheral Section ================ */ +/* ================================================================================ */ + +/* ----------------Configuration of the Cortex-M3 Processor and Core Peripherals---------------- */ +#define __CM3_REV 0x0000 /*!< Cortex-M3 Core Revision */ +#define __MPU_PRESENT 0 /*!< MPU present or not */ +#define __NVIC_PRIO_BITS 0 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +/** @} */ /* End of group Configuration_of_CMSIS */ + +#include <core_cm3.h> /*!< Cortex-M3 processor and core peripherals */ +#include "system_cmem7.h" /*!< cmem7 System */ + + +/* ================================================================================ */ +/* ================ Device Specific Peripheral Section ================ */ +/* ================================================================================ */ + + +/** @addtogroup Device_Peripheral_Registers + * @{ + */ + + +/* ------------------- Start of section using anonymous unions ------------------ */ +#if defined(__CC_ARM) + #pragma push + #pragma anon_unions +#elif defined(__ICCARM__) + #pragma language=extended +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__TMS470__) +/* anonymous unions are enabled by default */ +#elif defined(__TASKING__) + #pragma warning 586 +#else + #warning Not supported compiler type +#endif + + + +/* ================================================================================ */ +/* ================ UART0 ================ */ +/* ================================================================================ */ + + +/** + * @brief asynchronous serial controller 0 (UART0) + */ + +typedef struct { /*!< UART0 Structure */ + __IO uint16_t BAUDRATE; /*!< baudrate Register */ + __I uint16_t RESERVED0; + __IO uint16_t TX_BUF; /*!< transmit buffer Register */ + __I uint16_t RESERVED1; + __I uint16_t RX_BUF; /*!< receive buffer Register */ + __I uint16_t RESERVED2; + + union { + __IO uint32_t CTRL; /*!< control Register */ + + struct { + __IO uint32_t MODE : 3; /*!< asc mode control */ + __IO uint32_t STOP : 2; /*!< number of stop bits selection */ + __IO uint32_t PARITY : 1; /*!< parity selection */ + __IO uint32_t LOOPBACK : 1; /*!< loopback mode enable bit */ + uint32_t : 1; + __IO uint32_t RX_EN : 1; /*!< receive enable bit */ + uint32_t : 1; + __IO uint32_t FIFO_EN : 1; /*!< FIFO enable bit */ + __IO uint32_t CTS : 1; /*!< Clear to send, enable signal to send */ + __IO uint32_t BAUD_MODE : 1; /*!< baudrate generation mode */ + __IO uint32_t RX_THRESHOLD: 5; /*!< receive threshold */ + __IO uint32_t RX_HALF_FULL: 5; /*!< receive fifi half full level */ + } CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_MASK; /*!< interrupt mask register */ + + struct { + __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ + __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ + __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */ + __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */ + __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */ + __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */ + __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */ + __IO uint32_t PE : 1; /*!< parity error interrupt */ + __IO uint32_t FE : 1; /*!< frame error interrupt */ + __IO uint32_t OE : 1; /*!< overrun error interrupt */ + __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */ + } INT_MASK_b; /*!< BitSize */ + }; + + union { + __IO uint32_t STATUS; /*!< status register */ + + struct { + __IO uint32_t RNE : 1; /*!< receiver FIFO not empty */ + __IO uint32_t TE : 1; /*!< Transmitter FIFO empty */ + __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */ + __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty */ + __IO uint32_t TOE : 1; /*!< time out when the receiver FIFO is empty */ + __IO uint32_t RHF : 1; /*!< receiver FIFO is half full */ + __IO uint32_t TF : 1; /*!< transmitter FIFO is full */ + } STATUS_b; /*!< BitSize */ + }; + __IO uint8_t TIMEOUT; /*!< timeout Register */ + __I uint8_t RESERVED3[3]; + + union { + __IO uint32_t TX_RESET; /*!< transmit reset Register */ + + struct { + __IO uint32_t EN : 1; /*!< enable */ + } TX_RESET_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RX_RESET; /*!< receive reset Register */ + + struct { + __IO uint32_t EN : 1; /*!< enable */ + } RX_RESET_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RUN; /*!< uart enable register */ + + struct { + __IO uint32_t EN : 1; /*!< enable */ + } RUN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_RAW; /*!< raw interrupt before mask register */ + + struct { + __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ + __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ + __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */ + __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */ + __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */ + __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */ + __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */ + __IO uint32_t PE : 1; /*!< parity error interrupt */ + __IO uint32_t FE : 1; /*!< frame error interrupt */ + __IO uint32_t OE : 1; /*!< overrun error interrupt */ + __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */ + } INT_RAW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_SEEN; /*!< interrupt after mask register */ + + struct { + __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ + __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ + __IO uint32_t THE : 1; /*!< Transmitter FIFO at least half empty flag */ + __IO uint32_t TONE : 1; /*!< timeout when the receiver FIFO is not empty interrupt */ + __IO uint32_t TOE : 1; /*!< timeout when the receiver FIFO is empty interrupt */ + __IO uint32_t RHF : 1; /*!< receiver FIFO is half full interrupt */ + __IO uint32_t TF : 1; /*!< transmitter FIFO full interrupt */ + __IO uint32_t PE : 1; /*!< parity error interrupt */ + __IO uint32_t FE : 1; /*!< frame error interrupt */ + __IO uint32_t OE : 1; /*!< overrun error interrupt */ + __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */ + } INT_SEEN_b; /*!< BitSize */ + }; +} UART0_Type; + + +/* ================================================================================ */ +/* ================ WDG ================ */ +/* ================================================================================ */ + + +/** + * @brief watchdog (WDG) + */ + +typedef struct { /*!< WDG Structure */ + + union { + __IO uint32_t CTRL; /*!< control Register */ + + struct { + __IO uint32_t EN : 1; /*!< flag indicates if watchdog is enabled or not */ + __IO uint32_t INT_LEN : 1; /*!< watchdog report interrupt when COUNTER is 1/4 or 1/2 of LENGTH */ + } CTRL_b; /*!< BitSize */ + }; + __IO uint32_t LEN; /*!< Ticks decrease down to 25% or 50% to trigger an interrupt */ + + union { + __IO uint32_t INT_CTRL; /*!< interrupt control */ + + struct { + __IO uint32_t MASK : 1; /*!< mask register */ + __IO uint32_t TRIGGER_MODE: 1; /*!< trigger mode */ + } INT_CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_STA; /*!< interrupt status register */ + + struct { + __IO uint32_t STA : 1; /*!< interrupt status */ + } INT_STA_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_RAW; /*!< interrupt raw register */ + + struct { + __IO uint32_t STA : 1; /*!< interrupt status */ + } INT_RAW_b; /*!< BitSize */ + }; + __I uint32_t CNT; /*!< counter register */ +} WDG_Type; + + +/* ================================================================================ */ +/* ================ TIMER0 ================ */ +/* ================================================================================ */ + + +/** + * @brief timer 0 (TIMER0) + */ + +typedef struct { /*!< TIMER0 Structure */ + + union { + __IO uint32_t CTRL; /*!< control Register */ + + struct { + __IO uint32_t EN : 1; /*!< flag indicates if timer is enabled or not */ + } CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TYPE; /*!< type Register */ + + struct { + __IO uint32_t SIGNLE_SHOT: 1; /*!< indicate timer generate only one interrupt if not reload */ + } TYPE_b; /*!< BitSize */ + }; + __IO uint32_t LEN; /*!< length */ + + union { + __IO uint32_t INT_EN; /*!< interrupt enable */ + + struct { + __IO uint32_t EN_REVERSE : 1; /*!< flag indicates if timer is disable or not */ + } INT_EN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_STA; /*!< interrupt status */ + + struct { + __IO uint32_t STA : 1; /*!< interrupt status */ + } INT_STA_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_RAW; /*!< interrupt raw register */ + + struct { + __IO uint32_t STA : 1; /*!< interrupt status */ + } INT_RAW_b; /*!< BitSize */ + }; + __I uint32_t CNT; /*!< counter register */ +} TIMER0_Type; + + +/* ================================================================================ */ +/* ================ SPI0 ================ */ +/* ================================================================================ */ + + +/** + * @brief SPI 0 (SPI0) + */ + +typedef struct { /*!< SPI0 Structure */ + + union { + __I uint32_t STATUS; /*!< status Register */ + + struct { + __I uint32_t RFIFO_EMPTY: 1; /*!< receive fifo is empty */ + __I uint32_t RFIFO_FULL : 1; /*!< receive fifo is full */ + __I uint32_t RFIFO_ALMOST_EMPTY: 1; /*!< receive fifo is almost empty */ + __I uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full */ + __I uint32_t TFIFO_EMPTY: 1; /*!< transmit fifo is empty */ + __I uint32_t TFIFO_FULL : 1; /*!< transmit fifo is full */ + __I uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo is almost empty */ + __I uint32_t TFIFO_ALMOST_FULL: 1; /*!< transmit fifo almost full */ + __I uint32_t BUSY : 1; /*!< indecates if SPI is idle or busy */ + } STATUS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTRL; /*!< control Register */ + + struct { + __IO uint32_t EN : 1; /*!< indicates if SPI is enabled or not */ + __IO uint32_t RX_EN : 1; /*!< indicates if SPI receiver is enabled or not */ + __IO uint32_t CLK_HIGH : 1; /*!< indicats if idle clock polarity is high level */ + __IO uint32_t NEG_EDGE : 1; /*!< 1, indicates SPI takes sample at the rise edge and transmit + data at the trailing edge. 0, conversely. */ + __IO uint32_t TX_BIT_SEQUENCE: 1; /*!< transmit bit sequence. 0 : MSB is sent first */ + __IO uint32_t RX_BIT_SEQUENCE: 1; /*!< receive bit sequence. 0: MSB is received first */ + } CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_MASK; /*!< interrupt mask Register */ + + struct { + __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ + __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ + __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */ + __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */ + __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */ + __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */ + __IO uint32_t DONE : 1; /*!< transmit done interrupt */ + } INT_MASK_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_STATUS; /*!< interrupt Register */ + + struct { + __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ + __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ + __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */ + __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */ + __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */ + __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */ + __IO uint32_t DONE : 1; /*!< transmit done interrupt */ + } INT_STATUS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_RAW; /*!< interrupt raw Register */ + + struct { + __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ + __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ + __IO uint32_t RFIFO_ALMOST_FULL: 1; /*!< receive fifo almost full interrupt */ + __IO uint32_t TFIFO_UNDERFLOW: 1; /*!< transmit fifo underflow interrupt */ + __IO uint32_t TFIFO_OVERFLOW: 1; /*!< transmit fifo overflow interrupt */ + __IO uint32_t TFIFO_ALMOST_EMPTY: 1; /*!< transmit fifo almost empty interrupt */ + __IO uint32_t DONE : 1; /*!< transmit done interrupt */ + } INT_RAW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t BCNT; /*!< bit length while transmitting and receiving */ + + struct { + __IO uint32_t CNT : 5; /*!< bit length while transmitting and receiving, BCNT + 1 */ + } BCNT_b; /*!< BitSize */ + }; + __IO uint8_t GAP; /*!< half cycle number between continuous data frame */ + __I uint8_t RESERVED0[3]; + __IO uint16_t DIV; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */ + __I uint16_t RESERVED1; + __IO uint32_t TRANS_CNT; /*!< transmit data length, data number = TRANS_CNT + 1 */ + + union { + __O uint32_t TRANS_START; /*!< transmit startup register, write 1 to trigger transmision once */ + + struct { + __O uint32_t TX_TRIGGER : 1; /*!< write 1 to trigger transmision once */ + } TRANS_START_b; /*!< BitSize */ + }; + __IO uint32_t RW_DATA; /*!< raw data register */ +} SPI0_Type; + + +/* ================================================================================ */ +/* ================ I2C0 ================ */ +/* ================================================================================ */ + + +/** + * @brief I2C 0 (I2C0) + */ + +typedef struct { /*!< I2C0 Structure */ + + union { + __IO uint32_t CTRL; /*!< control Register */ + + struct { + __IO uint32_t MODE : 1; /*!< master or slave mode */ + __IO uint32_t MASTER_ADDR_WIDTH: 1; /*!< 7- or 10-bits address as a master */ + __IO uint32_t SLAVE_ADDR_WIDTH: 1; /*!< 7- or 10-bits address width as a slave */ + } CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint16_t TAR; /*!< target address Register */ + + struct { + __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */ + __IO uint16_t START_BYTE : 1; /*!< Enable start Byte for each transfer */ + } TAR_b; /*!< BitSize */ + }; + __I uint16_t RESERVED0; + + union { + __IO uint16_t SAR; /*!< slave address Register */ + + struct { + __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */ + } SAR_b; /*!< BitSize */ + }; + __I uint16_t RESERVED1; + + union { + __IO uint32_t DATA_CMD; /*!< I2C transfer data/command entry */ + + struct { + __IO uint32_t DATA : 8; /*!< 8-bits data */ + __O uint32_t RD_CMD : 1; /*!< read command for master mode only, write 0 if slave mode */ + __O uint32_t WR_CMD : 1; /*!< write command for master mode only */ + __O uint32_t WR_RD_CMD : 1; /*!< write and read command for master mode only */ + } DATA_CMD_b; /*!< BitSize */ + }; + + union { + __IO uint32_t WRITE_READ_CNT; /*!< I2C write and read data byte counter Register */ + + struct { + __IO uint32_t RD_BYTE_CNT: 9; /*!< Decide the number of bytes read back as a master-receiver */ + uint32_t : 7; + __IO uint32_t WR_BYTE_CNT: 9; /*!< Decide the number of byte to send as a master-transmitter */ + } WRITE_READ_CNT_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SCL_CNT; /*!< I2C clk pulse counter */ + + struct { + __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< the SCL clock high-period count */ + __IO uint32_t LOW_LEVEL_TICK: 16; /*!< the SCL clock low-period count */ + } SCL_CNT_b; /*!< BitSize */ + }; + __I uint32_t RESERVED2; + + union { + __I uint32_t INT_STATUS; /*!< I2C interrupt sources */ + + struct { + __I uint32_t RX_UNDER : 1; /*!< receiver underflow */ + __I uint32_t RX_OVER : 1; /*!< receiver overflow */ + __I uint32_t RX_FULL : 1; /*!< receiver is full */ + __I uint32_t TX_OVER : 1; /*!< transmit overflow */ + __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */ + __I uint32_t RD_REQ : 1; /*!< read request */ + __I uint32_t TX_ABRT : 1; /*!< transmit abortion */ + __I uint32_t RX_DONE : 1; /*!< receive done */ + __I uint32_t TX_DONE : 1; /*!< transmit done */ + __I uint32_t WR_REQ : 1; /*!< write request */ + } INT_STATUS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_MASK; /*!< I2C interrupt mask register */ + + struct { + __I uint32_t RX_UNDER : 1; /*!< receiver underflow */ + __I uint32_t RX_OVER : 1; /*!< receiver overflow */ + __I uint32_t RX_FULL : 1; /*!< receiver is full */ + __I uint32_t TX_OVER : 1; /*!< transmit overflow */ + __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */ + __I uint32_t RD_REQ : 1; /*!< read request */ + __I uint32_t TX_ABRT : 1; /*!< transmit abortion */ + __I uint32_t RX_DONE : 1; /*!< receive done */ + __I uint32_t TX_DONE : 1; /*!< transmit done */ + __I uint32_t WR_REQ : 1; /*!< write request */ + } INT_MASK_b; /*!< BitSize */ + }; + __I uint32_t RESERVED3; + + union { + __IO uint32_t RX_TL; /*!< I2C receive FIFO threshold */ + + struct { + __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */ + } RX_TL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TX_TL; /*!< I2C transmit FIFO threshold */ + + struct { + __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */ + } TX_TL_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_ALL_INT; /*!< I2C clear all interrupt register */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear all individual interrupts */ + } CLR_ALL_INT_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_RX_UNDER; /*!< I2C clear RX_UNDER interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_UNDER interrupt (bit 19) + of the I2C_STATUS register */ + } CLR_RX_UNDER_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_RX_OVER; /*!< I2C clear RX_OVER interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_OVER interrupt (bit 20) of + the I2C_STATUS register */ + } CLR_RX_OVER_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_TX_OVER; /*!< I2C clear TX_OVER interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_OVER interrupt (bit 22) of + the I2C_STATUS register */ + } CLR_TX_OVER_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_RD_REQ; /*!< I2C clear RD_REQ interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the RD_REQ interrupt (bit 24) of + the I2C_STATUS register */ + } CLR_RD_REQ_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_TX_ABRT; /*!< I2C clear TX_ABRT interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_ABRT interrupts (bit 25 , + bit 18, bit 17, bit 16 and bit 15) of the I2C_STATUS register. */ + } CLR_TX_ABRT_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_RX_DONE; /*!< I2C clear RX_DONE interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_DONE interrupt (bit 26) of + the I2C_STATUS register */ + } CLR_RX_DONE_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ENABLE; /*!< I2C enable register */ + + struct { + __IO uint32_t EN : 1; /*!< enable device */ + uint32_t : 30; + __IO uint32_t RESET : 1; /*!< TX and RX FIFO are held in an erased state( flushed) and all + interrupts deserted */ + } ENABLE_b; /*!< BitSize */ + }; + + union { + __I uint32_t STATUS; /*!< I2C status register */ + + struct { + __I uint32_t BUSY : 1; /*!< I2C busy Status */ + __I uint32_t TX_FIFO_NOT_FULL: 1; /*!< transmit FIFO is not full */ + __I uint32_t TX_FIFO_EMPTY: 1; /*!< transmit FIFO is empty */ + __I uint32_t RX_FIFO_NOT_EMPTY: 1; /*!< receive FIFO is not empty */ + __I uint32_t RX_FIFO_FULL: 1; /*!< receive FIFO is full */ + __I uint32_t EN : 1; /*!< I2C is enabled */ + __I uint32_t TX_BYTE_W_ACK: 9; /*!< Number of bytes sent to slave with acknowledge during the last + write transaction as a master-transmitter only */ + __I uint32_t ABRT_ADDR_NOACK: 1; /*!< the address sent was not acknowledged by any slave as a master */ + __I uint32_t ABRT_TX_DATA_NOACK: 1; /*!< the data sent was not acknowledged by any slave as a master */ + __I uint32_t ABRT_SLAVE_FLUSH_TX_FIFO: 1; /*!< Slave has received a read command and some data exists in the + TX FIFO so the slave issues a TX_ABRT interrupt to flush old + data in TX FIFO */ + __I uint32_t ABRT_SLAVE_RD_IN_TX: 1; /*!< When the processor side responds to a slave mode request for + data to be transmitted to a remote master and user writes a + 1 in CMD (bit 8) of I2C_DATA_CMD register */ + __I uint32_t RX_UNDER : 1; /*!< receiver is underflow */ + __I uint32_t RX_OVER : 1; /*!< receiver is overflow */ + __I uint32_t RX_FULL : 1; /*!< receiver is full */ + __I uint32_t TX_OVER : 1; /*!< transmit is overflow */ + __I uint32_t TX_EMPTY : 1; /*!< transmit is empty */ + __I uint32_t RD_REQ : 1; /*!< read request is received */ + __I uint32_t TX_ABRT : 1; /*!< transmit is abort */ + __I uint32_t RX_DONE : 1; /*!< receive is done */ + __I uint32_t TX_DONE : 1; /*!< transmit is done */ + __I uint32_t WR_REQ : 1; /*!< write request is received */ + __I uint32_t MST_RD_FLAG: 1; /*!< Master is executing read command */ + __I uint32_t MST_WR_FLAG: 1; /*!< Master is executing read command */ + __I uint32_t MST_WR_RD_FLAG: 1; /*!< Master is executing write-read command */ + } STATUS_b; /*!< BitSize */ + }; + + union { + __I uint32_t TX_FIFO_LEVEL; /*!< I2C transmit FIFO level */ + + struct { + __I uint32_t LEVEL : 5; /*!< FIFO level */ + } TX_FIFO_LEVEL_b; /*!< BitSize */ + }; + + union { + __I uint32_t RX_FIFO_LEVEL; /*!< I2C receive FIFO level */ + + struct { + __I uint32_t LEVEL : 5; /*!< FIFO level */ + } RX_FIFO_LEVEL_b; /*!< BitSize */ + }; + __I uint32_t RESERVED4; + + union { + __O uint32_t SLAVE_NACK; /*!< I2C slave send a data NACK */ + + struct { + __O uint32_t NACK : 1; /*!< data NACK */ + } SLAVE_NACK_b; /*!< BitSize */ + }; + __I uint32_t RESERVED5; + + union { + __IO uint32_t SDA_SETUP; /*!< I2C SDA setup timer */ + + struct { + __IO uint32_t TSETUP : 10; /*!< This counter defines the max value of the following constrains:THD:STA + TSU:STO,TSETUP: T / INPUT_CLK_PERIOD */ + __IO uint32_t TSU_DAT : 8; /*!< This counter defines the constrain of TSU:DAT: 250ns (or 100ns) + / INPUT_CLK_PERIOD */ + } SDA_SETUP_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TSU_STA_SETUP; /*!< I2C Tsu_sta and Tbuf_free timer */ + + struct { + __IO uint32_t TBUF : 10; /*!< This counter defines the constrain of bus free interval: Tbuf, + Tbuf : Tbus_free / INPUT_CLK_PERIOD */ + __IO uint32_t TSU_STA : 10; /*!< This counter defines the constrain of Tsu:sta, Tsu:sta : Tsu:sta + / INPUT_CLK_PERIOD */ + __IO uint32_t SDA_FILTER_CNT: 4; /*!< SDA filter count */ + __IO uint32_t SDA_FILTER_EN: 1; /*!< SDA filter enable bit */ + __IO uint32_t SCL_FILTER_CNT: 4; /*!< SCL filter count */ + __IO uint32_t SCL_FILTER_EN: 1; /*!< SCL filter enable bit */ + } TSU_STA_SETUP_b; /*!< BitSize */ + }; + + union { + __I uint32_t CLR_TX_DONE; /*!< I2C clear TX_DONE interrupt */ + + struct { + __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_DONE interrupt (bit 27) of + the I2C_STATUS register */ + } CLR_TX_DONE_b; /*!< BitSize */ + }; +} I2C0_Type; + + +/* ================================================================================ */ +/* ================ RTC ================ */ +/* ================================================================================ */ + + +/** + * @brief RTC (RTC) + */ + +typedef struct { /*!< RTC Structure */ + + union { + __IO uint32_t INT_STATUS; /*!< interrupt Register */ + + struct { + __IO uint32_t SECOND : 1; /*!< 1s interrupt, write 1 clear 0 */ + __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt, write 1 clear 0 */ + } INT_STATUS_b; /*!< BitSize */ + }; + __IO uint32_t SECOND; /*!< current seconds of system time */ + + union { + __IO uint16_t MILLSECOND; /*!< current millseconds of system time */ + + struct { + __IO uint16_t MS : 10; /*!< micro seconds */ + } MILLSECOND_b; /*!< BitSize */ + }; +} RTC_Type; + + +/* ================================================================================ */ +/* ================ GPIO ================ */ +/* ================================================================================ */ + + +/** + * @brief GPIO (GPIO) + */ + +typedef struct { /*!< GPIO Structure */ + __I uint32_t GPIO_IN; /*!< GPIO input data */ + __IO uint32_t GPIO_OUT_UNMASK; /*!< GPIO output mask Register */ + __IO uint32_t GPIO_OUT_DATA; /*!< GPIO output data register */ + __IO uint32_t GPIO_OE; /*!< GPIO output driver enable */ + __IO uint32_t GPIO_INT_MASK; /*!< GPIO input interrupt mask */ + __IO uint32_t GPIO_INT_STATUS; /*!< GPIO input interrupt status */ + __IO uint32_t GPIO_INT_RAW; /*!< GPIO input interrupt raw */ + __IO uint32_t GPIO_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */ + + union { + __IO uint32_t PWM_OUT_SEL; /*!< Select gpio output from PWM */ + + struct { + __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */ + __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */ + __IO uint32_t GPIO_H_19 : 1; /*!< GPIO_H[19] is selected to output PWM */ + __IO uint32_t GPIO_H_20 : 1; /*!< GPIO_H[20] is selected to output PWM */ + } PWM_OUT_SEL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PWM_OUT0_LEN; /*!< Pwm channel 0 paramters */ + + struct { + __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ + __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ + } PWM_OUT0_LEN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PWM_OUT1_LEN; /*!< Pwm channel 1 paramters */ + + struct { + __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ + __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ + } PWM_OUT1_LEN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PWM_OUT2_LEN; /*!< Pwm channel 2 paramters */ + + struct { + __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ + __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ + } PWM_OUT2_LEN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PWM_OUT3_LEN; /*!< Pwm channel 3 paramters */ + + struct { + __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ + __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ + } PWM_OUT3_LEN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PWM_OUT_EN; /*!< Pwm enable */ + + struct { + __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */ + __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */ + __IO uint32_t GPIO_H_19 : 1; /*!< GPIO_H[19] is selected to output PWM */ + __IO uint32_t GPIO_H_20 : 1; /*!< GPIO_H[20] is selected to output PWM */ + } PWM_OUT_EN_b; /*!< BitSize */ + }; + __I uint32_t GPIO_H_IN; /*!< GPIO_H input data */ + __IO uint32_t GPIO_H_OUT_UNMASK; /*!< GPIO_H output unmask Register */ + __IO uint32_t GPIO_H_OUT_DATA; /*!< GPIO_H output data register */ + __IO uint32_t GPIO_H_OE; /*!< GPIO_H output driver enable */ + __IO uint32_t GPIO_H_INT_MASK; /*!< GPIO_H interrupt mask */ + __IO uint32_t GPIO_H_INT_STATUS; /*!< GPIO_H interrupt status */ + __IO uint32_t GPIO_H_INT_RAW; /*!< GPIO_H interrupt raw */ + __IO uint32_t GPIO_H_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */ + __I uint32_t GPIO_N_IN; /*!< GPIO_N input data */ + __IO uint32_t GPIO_N_OUT_UNMASK; /*!< GPIO_N output unmask Register */ + __IO uint32_t GPIO_N_OUT_DATA; /*!< GPIO_N output data register */ + __IO uint32_t GPIO_N_OE; /*!< GPIO_N output driver enable */ + __IO uint32_t GPIO_N_INT_MASK; /*!< GPIO_N interrupt mask */ + __IO uint32_t GPIO_N_INT_STATUS; /*!< GPIO_N interrupt status */ + __IO uint32_t GPIO_N_INT_RAW; /*!< GPIO_N interrupt raw */ + __IO uint32_t GPIO_N_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */ +} GPIO_Type; + + +/* ================================================================================ */ +/* ================ NOR_FLASH ================ */ +/* ================================================================================ */ + + +/** + * @brief NOR_FLASH (NOR_FLASH) + */ + +typedef struct { /*!< NOR_FLASH Structure */ + + union { + __IO uint32_t CTRL0; /*!< control Register 0 */ + + struct { + __IO uint32_t DIV : 8; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */ + __IO uint32_t CS_REVALID_INTERVAL: 8; /*!< interval from CS invalid to valid, number of half cycle of SCK */ + __IO uint32_t RW_BYTE_CNT: 16; /*!< RW byte count (eliminate CMD, ADDRESS, DUMMY in normal state, + contains all in transparent state. 0 is unlimited */ + } CTRL0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTRL1; /*!< control Register 1 */ + + struct { + __IO uint32_t CMD : 8; /*!< operated command */ + __IO uint32_t ADDRESS : 24; /*!< RW address */ + } CTRL1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TRIGGER; /*!< trigger register */ + + struct { + __O uint32_t OP_START : 1; /*!< operation start. */ + __IO uint32_t OP_CLEAN : 1; /*!< operation clean, stop current opration and clean FIFO */ + __IO uint32_t TRSP_RD_EN : 1; /*!< if a read operation after transparent operation */ + __IO uint32_t TRSP_EN : 1; /*!< enable transparent operation */ + } TRIGGER_b; /*!< BitSize */ + }; + + union { + __I uint32_t STATUS; /*!< status register */ + + struct { + __I uint32_t BUSY : 1; /*!< reading or writting */ + __I uint32_t RD_FIFO_ALMOST_FULL: 1; /*!< read FIFO is almost full */ + __I uint32_t RD_FIFO_EMPTY: 1; /*!< read FIFO is empty */ + __I uint32_t RD_FIFO_FULL: 1; /*!< read FIFO is full */ + __I uint32_t WR_FIFO_ALMOST_EMPTY: 1; /*!< write FIFO is almost empty */ + __I uint32_t WR_FIFO_FULL: 1; /*!< write FIFO is full */ + __I uint32_t WR_FIFO_EMPTY: 1; /*!< write FIFO is empty */ + } STATUS_b; /*!< BitSize */ + }; + __IO uint32_t DATA; /*!< data register. lower bits are significant in read and higher + bits are significant in writting */ + + union { + __IO uint32_t BYPASS; /*!< bypass Register, is used for JTAG connecting FLASH directly */ + + struct { + __IO uint32_t EN : 1; /*!< enable bypass */ + } BYPASS_b; /*!< BitSize */ + }; +} NOR_FLASH_Type; + + +/* ================================================================================ */ +/* ================ ADC ================ */ +/* ================================================================================ */ + + +/** + * @brief ADC (ADC) + */ + +typedef struct { /*!< ADC Structure */ + + union { + __IO uint32_t POWERDOWN_RESET; /*!< power down and reset Register */ + + struct { + __IO uint32_t RESET_ADC2 : 1; /*!< ADC2, reset, active high */ + __IO uint32_t RESET_ADC1 : 1; /*!< ADC1, reset, active high */ + __IO uint32_t POWERDOWN_ADC2: 1; /*!< ADC2, power down, active high */ + __IO uint32_t POWERDOWN_ADC1: 1; /*!< ADC1, power down, active high */ + } POWERDOWN_RESET_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG0; /*!< config Register */ + + struct { + __IO uint32_t VSEN : 3; /*!< ADC-1 VSEN Selection */ + __IO uint32_t PHASE_CTRL : 2; /*!< ADC-1 and ADC-2 CLK Phase Control */ + } CFG0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_ADC1; /*!< config ADC1 register */ + + struct { + __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */ + __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */ + __IO uint32_t MULTI_CHANNEL_CONTINUE_SCAN: 1;/*!< If continue to scan multiply channel, else single scan */ + __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */ + } CFG_ADC1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_ADC2; /*!< config ADC1 register */ + + struct { + __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */ + __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */ + __IO uint32_t MULTI_CHANNEL_CONTINUE_SCAN: 1;/*!< If continue to scan multiply channel, else single scan */ + __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */ + } CFG_ADC2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ADC1_FIFO_CLEAR; /*!< clear adc1 fifo data */ + + struct { + __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ + } ADC1_FIFO_CLEAR_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ADC2_FIFO_CLEAR; /*!< clear adc2 fifo data */ + + struct { + __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ + } ADC2_FIFO_CLEAR_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ALL_ADC_FIFO_CLEAR; /*!< clear adc1 and adc2 fifo data */ + + struct { + __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ + } ALL_ADC_FIFO_CLEAR_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_MASK; /*!< interrupt mask register */ + + struct { + __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ + __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ + __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */ + __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */ + __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */ + __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */ + } INT_MASK_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_RAW; /*!< interrupt raw register */ + + struct { + __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ + __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ + __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */ + __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */ + __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */ + __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */ + } INT_RAW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_STATUS; /*!< interrupt status register */ + + struct { + __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ + __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ + __IO uint32_t ADC1_EMPTY_ERR: 1; /*!< ADC 1 read empty error */ + __IO uint32_t ADC2_ALMOST_FULL: 1; /*!< ADC 2 almost full */ + __IO uint32_t ADC2_OVERFLOW: 1; /*!< ADC 2 is overflow */ + __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */ + } INT_STATUS_b; /*!< BitSize */ + }; + __I uint32_t ADC1_OUT; /*!< ADC-1 Output data (Signed-Magnitude Format) */ + __I uint32_t ADC2_OUT; /*!< ADC-2 Output data (Signed-Magnitude Format) */ + __I uint32_t ADC1_OUT_OFFSET_CALIBRATION; /*!< ADC-1 Output in offset calibration when Input=0, Ideally DAO[11:0]=000h */ + __I uint32_t ADC2_OUT_OFFSET_CALIBRATION; /*!< ADC-2 Output in offset calibration when Input=0, Ideally DAO[11:0]=000h */ + __I uint32_t ADC1_OUT_NEGTIVE_GAIN_CALIBRATION; /*!< ADC-1 Output in gain calibration when Input=-FS, Ideally DAO[11:0]=801h */ + __I uint32_t ADC2_OUT_NEGTIVE_GAIN_CALIBRATION; /*!< ADC-2 Output in gain calibration when Input=-FS, Ideally DAO[11:0]=801h */ + __I uint32_t ADC1_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-1 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */ + __I uint32_t ADC2_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-2 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */ + + union { + __I uint32_t EOC; /*!< Conversion End Indicator */ + + struct { + __I uint32_t ADC2_EOC_GAIN: 1; /*!< ADC2 EOC_GAIN signal, conversion is done */ + __I uint32_t ADC2_EOC_OFF: 1; /*!< ADC2 EOC_OFF signal, conversion is done */ + __I uint32_t ADC2_EOC : 1; /*!< ADC2 EOC signal, conversion is done */ + __I uint32_t ADC1_EOC_GAIN: 1; /*!< ADC1 EOC_GAIN signal, conversion is done */ + __I uint32_t ADC1_EOC_OFF: 1; /*!< ADC1 EOC_OFF signal, conversion is done */ + __I uint32_t ADC1_EOC : 1; /*!< ADC1 EOC signal, conversion is done */ + } EOC_b; /*!< BitSize */ + }; + + union { + __I uint32_t BUSY; /*!< ADC is busy */ + + struct { + __I uint32_t ADC1_BUSY : 1; /*!< ADC1 is busy */ + __I uint32_t ADC2_BUSY : 1; /*!< ADC2 is busy */ + } BUSY_b; /*!< BitSize */ + }; + + union { + __O uint32_t ADC1_START; /*!< ADC1 startup enable */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ADC1_START_b; /*!< BitSize */ + }; + + union { + __O uint32_t ADC1_STOP; /*!< ADC1 stop enable */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ADC1_STOP_b; /*!< BitSize */ + }; + + union { + __O uint16_t ADC1_FIFO_READ; /*!< ADC1 FIFO read data */ + + struct { + __O uint16_t DATA : 12; /*!< data */ + __O uint16_t CHANNEL : 4; /*!< channel number */ + } ADC1_FIFO_READ_b; /*!< BitSize */ + }; + __I uint16_t RESERVED0; + + union { + __O uint32_t ADC2_START; /*!< ADC2 startup enable, only for single-conversion */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ADC2_START_b; /*!< BitSize */ + }; + + union { + __O uint32_t ADC2_STOP; /*!< ADC1 stop enable, only for single-conversion */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ADC2_STOP_b; /*!< BitSize */ + }; + + union { + __O uint16_t ADC2_FIFO_READ; /*!< ADC2 FIFO read data */ + + struct { + __O uint16_t DATA : 12; /*!< data */ + __O uint16_t CHANNEL : 4; /*!< channel number */ + } ADC2_FIFO_READ_b; /*!< BitSize */ + }; + __I uint16_t RESERVED1; + + union { + __O uint32_t ALL_ADC_START; /*!< all ADCs start */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ALL_ADC_START_b; /*!< BitSize */ + }; + + union { + __O uint32_t ALL_ADC_STOP; /*!< all ADCs stop */ + + struct { + __O uint32_t EN : 1; /*!< start */ + } ALL_ADC_STOP_b; /*!< BitSize */ + }; + + union { + __I uint32_t ALL_ADC_FIFO_READ; /*!< all ADCs FIFO read data */ + + struct { + __I uint32_t ADC1_DATA : 12; /*!< ADC1 data */ + __I uint32_t ADC1_CHANNEL: 4; /*!< ADC1 channel number */ + __I uint32_t ADC2_DATA : 12; /*!< ADC2 data */ + __I uint32_t ADC2_CHANNEL: 4; /*!< ADC2 channel number */ + } ALL_ADC_FIFO_READ_b; /*!< BitSize */ + }; + + union { + __I uint32_t STATUS; /*!< status register */ + + struct { + __I uint32_t ADC1_READ_EMPTY: 1; /*!< ADC1 read empty */ + __I uint32_t ADC2_READ_EMPTY: 1; /*!< ADC2 read empty */ + __I uint32_t ADC1_READ_ALMOST_EMPTY: 1; /*!< ADC1 read almost empty */ + __I uint32_t ADC2_READ_ALMOST_EMPTY: 1; /*!< ADC2 read almost empty */ + __I uint32_t ADC1_WRITE_FULL: 1; /*!< ADC1 write full */ + __I uint32_t ADC2_WRITE_FULL: 1; /*!< ADC2 write full */ + __I uint32_t ADC1_WRITE_ALMOST_FULL: 1; /*!< ADC1 write almost full */ + __I uint32_t ADC2_WRITE_ALMOST_FULL: 1; /*!< ADC2 write almost full */ + } STATUS_b; /*!< BitSize */ + }; +} ADC_Type; + + +/* ================================================================================ */ +/* ================ EFUSE ================ */ +/* ================================================================================ */ + + +/** + * @brief EFUSE (EFUSE) + */ + +typedef struct { /*!< EFUSE Structure */ + + union { + __IO uint32_t USER_CTRL_LOW; /*!< low user region control */ + + struct { + __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */ + __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */ + __I uint32_t BUSY : 1; /*!< reading or writting */ + __IO uint32_t COMPARE_FAIL: 1; /*!< data read isn't consist with EFUSE */ + __I uint32_t RD_CRC_ERR : 1; /*!< CRC error in reading */ + __I uint32_t WR_CRC_ERR : 1; /*!< CRC error in writting */ + __I uint32_t LOCK : 1; /*!< user region in EFUSE is locked, EFUSE can't be burn */ + __IO uint32_t TMRF : 2; /*!< Reference resistor select, 1200ohm is recommended */ + } USER_CTRL_LOW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TIMING_0; /*!< timing 0 */ + + struct { + __IO uint32_t TPRS : 7; /*!< TPRS */ + __IO uint32_t TESR : 2; /*!< TESR */ + __IO uint32_t TRC : 4; /*!< TRC */ + __IO uint32_t TRPW : 3; /*!< TRPW */ + __IO uint32_t TRAH : 2; /*!< TRAH */ + __IO uint32_t TRAC : 3; /*!< TRAC */ + uint32_t : 6; + __IO uint32_t TPWPH : 5; /*!< TPWPH[6:2] */ + } TIMING_0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TIMING_1; /*!< timing 1 */ + + struct { + __IO uint32_t TPWPS : 7; /*!< TPWPS */ + __IO uint32_t TEPS : 4; /*!< TEPS */ + __IO uint32_t TPP : 11; /*!< TPP */ + __IO uint32_t TPIT : 8; /*!< TPIT */ + __IO uint32_t TPWPH : 2; /*!< TPWPS[1:0] */ + } TIMING_1_b; /*!< BitSize */ + }; + __IO uint32_t USER_DATA0_LOW; /*!< user data [31:0] */ + __IO uint32_t USER_DATA1_LOW; /*!< user data [63:32] */ + __IO uint32_t USER_DATA2_LOW; /*!< user data [95:64] */ + __IO uint32_t USER_DATA3_LOW; /*!< user data [127:96] */ + + union { + __IO uint32_t USER_DATA4_LOW; /*!< crc and lock bit */ + + struct { + __IO uint32_t LOCK : 1; /*!< write protection if true */ + uint32_t : 23; + __IO uint32_t CRC : 8; /*!< CRC */ + } USER_DATA4_LOW_b; /*!< BitSize */ + }; + __I uint32_t RESERVED0[3]; + + union { + __IO uint32_t USER_CTRL_HI; /*!< high user region control */ + + struct { + __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */ + __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */ + __I uint32_t BUSY : 1; /*!< reading or writting */ + __IO uint32_t COMPARE_FAIL: 1; /*!< data read isn't consist with EFUSE */ + __I uint32_t RD_CRC_ERR : 1; /*!< CRC error in reading */ + __I uint32_t WR_CRC_ERR : 1; /*!< CRC error in writting */ + __I uint32_t LOCK : 1; /*!< user region in EFUSE is locked, EFUSE can't be burn */ + __IO uint32_t TMRF : 2; /*!< Reference resistor select, 1200ohm is recommended */ + } USER_CTRL_HI_b; /*!< BitSize */ + }; + __IO uint32_t USER_DATA0_HI; /*!< user data [159:128] */ + __IO uint32_t USER_DATA1_HI; /*!< user data [191:160] */ + __IO uint32_t USER_DATA2_HI; /*!< user data [223:192] */ + __IO uint32_t USER_DATA3_HI; /*!< user data [255:224] */ + + union { + __IO uint32_t USER_DATA4_HI; /*!< crc and lock bit */ + + struct { + __IO uint32_t LOCK : 1; /*!< write protection if true */ + uint32_t : 23; + __IO uint32_t CRC : 8; /*!< CRC */ + } USER_DATA4_HI_b; /*!< BitSize */ + }; +} EFUSE_Type; + + +/* ================================================================================ */ +/* ================ CAN0 ================ */ +/* ================================================================================ */ + + +/** + * @brief CAN 0 (CAN0) + */ + +typedef struct { /*!< CAN0 Structure */ + + union { + __IO uint8_t MODE; /*!< mode Register */ + + struct { + __IO uint8_t RM : 1; /*!< reset mode if 1 or operation mode */ + __IO uint8_t LOM : 1; /*!< Listen only mode */ + __IO uint8_t STM : 1; /*!< self test mode */ + __IO uint8_t AFM : 1; /*!< acceptance filter mode. Single filter if 1, dual filter if 0 */ + __IO uint8_t SM : 1; /*!< sleep mode */ + } MODE_b; /*!< BitSize */ + }; + __I uint8_t RESERVED0[3]; + + union { + __O uint8_t CMD; /*!< command Register */ + + struct { + __O uint8_t TR : 1; /*!< Set to 1 when a message is to be transmitted */ + __O uint8_t AT : 1; /*!< Set to 1 to cancel the next transmission request */ + __O uint8_t RRB : 1; /*!< Set to 1 to release the Receive Buffer */ + __O uint8_t CDO : 1; /*!< Set to 1 to clear the data overrun condition signaled by the + Data Overrun Status bit (SR.1). */ + __O uint8_t SSR : 1; /*!< Set to 1 when a message is to be transmitted and received simultaneously */ + } CMD_b; /*!< BitSize */ + }; + __I uint8_t RESERVED1[3]; + + union { + __I uint8_t STATUS; /*!< status Register */ + + struct { + __I uint8_t RBNE : 1; /*!< Receive Buffer not empty */ + __I uint8_t DO : 1; /*!< Data Overrun Status */ + __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */ + __I uint8_t TC : 1; /*!< Transmission complete */ + __I uint8_t RXING : 1; /*!< receiving the data */ + __I uint8_t TXING : 1; /*!< transmitting the data */ + __I uint8_t ERR : 1; /*!< At least one of the error counters is more than Error Warning + Limit Register */ + __I uint8_t BUS_OFF : 1; /*!< in 'Bus Off' state */ + } STATUS_b; /*!< BitSize */ + }; + __I uint8_t RESERVED2[3]; + + union { + __I uint8_t INT; /*!< interrupt Register */ + + struct { + __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */ + __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */ + __I uint8_t ERR : 1; /*!< Set on every change (set or clear) of either the Bus Status + or Error Status bits (SR.7,SR.6) */ + __I uint8_t DO : 1; /*!< Data Overrun Status */ + __I uint8_t WAKEUP : 1; /*!< wake-up */ + __I uint8_t EP : 1; /*!< Set when the MCAN2 re-enters error active state after being + in error passive state or when at least one error counter exceeds + the protocol-defined level of 127 */ + __I uint8_t AL : 1; /*!< Set when the MCAN2 loses arbitration and becomes a receiver */ + __I uint8_t BUS_ERR : 1; /*!< Set when the MCAN2 detects an error on the CAN-bus */ + } INT_b; /*!< BitSize */ + }; + __I uint8_t RESERVED3[3]; + + union { + __IO uint8_t INT_EN; /*!< interrupt enabled Register */ + + struct { + __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */ + __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */ + __I uint8_t ERR : 1; /*!< Set on every change (set or clear) of either the Bus Status + or Error Status bits (SR.7,SR.6) */ + __I uint8_t DO : 1; /*!< Data Overrun Status */ + __I uint8_t WAKEUP : 1; /*!< wake-up */ + __I uint8_t EP : 1; /*!< Set when the MCAN2 re-enters error active state after being + in error passive state or when at least one error counter exceeds + the protocol-defined level of 127 */ + __I uint8_t AL : 1; /*!< Set when the MCAN2 loses arbitration and becomes a receiver */ + __I uint8_t BUS_ERR : 1; /*!< Set when the MCAN2 detects an error on the CAN-bus */ + } INT_EN_b; /*!< BitSize */ + }; + __I uint8_t RESERVED4[7]; + + union { + __IO uint8_t BTR0; /*!< Bus Timing 0 */ + + struct { + __IO uint8_t BRP : 6; /*!< TQ =2 x Txtal1 x (32 x BRP.5 + 16 x BRP.4 + 8 x BRP.3 + 4 x + BRP.2 + 2 x BRP.1 + BRP.0 + 1) */ + __IO uint8_t SJW : 2; /*!< the maximum number of time quanta of sync segment */ + } BTR0_b; /*!< BitSize */ + }; + __I uint8_t RESERVED5[3]; + + union { + __IO uint8_t BTR1; /*!< Bus Timing 1 */ + + struct { + __IO uint8_t TSEG1 : 4; /*!< the maximum number of time quanta of propagation and 1st phase + segment */ + __IO uint8_t TSEG2 : 3; /*!< the maximum number of time quanta of 2nd phase segment */ + __IO uint8_t SAM : 1; /*!< sample times. Sample 3 times if 1, once if 0 */ + } BTR1_b; /*!< BitSize */ + }; + __I uint8_t RESERVED6[3]; + + union { + __IO uint8_t OCR; /*!< Output Control Register */ + + struct { + __IO uint8_t MODE : 2; /*!< output control mode */ + } OCR_b; /*!< BitSize */ + }; + __I uint8_t RESERVED7[11]; + + union { + __I uint8_t ALC; /*!< Arbitration Lost Capture */ + + struct { + __I uint8_t BIT : 5; /*!< the current position of the Bit Processor when bus arbitration + lost, 1st bit (ID.28) if 0 */ + } ALC_b; /*!< BitSize */ + }; + __I uint8_t RESERVED8[3]; + + union { + __I uint8_t ECC; /*!< Error Code Capture */ + + struct { + __I uint8_t SEGMENT : 5; /*!< segment code */ + __I uint8_t DIRECTION : 1; /*!< If 1, the error occurred during reception. If 0, the error occurred + during transmission */ + __I uint8_t ERR : 2; /*!< error code */ + } ECC_b; /*!< BitSize */ + }; + __I uint8_t RESERVED9[3]; + __IO uint8_t EWLR; /*!< Error Warning Limit */ + __I uint8_t RESERVED10[3]; + __IO uint8_t RXERR; /*!< Receive Error Counter */ + __I uint8_t RESERVED11[3]; + __IO uint8_t TXERR; /*!< Transmit Error Counter */ + __I uint8_t RESERVED12[3]; + + union { + __IO uint8_t FI_OR_ACR0; /*!< Transmit Frame Information if writting or Receive Frame Information + if reading, ACR[0] if reset mode */ + + struct { + __IO uint8_t DLC : 4; /*!< byte number in the data */ + uint8_t : 2; + __IO uint8_t RTR : 1; /*!< 1 indicates a remote frame; 0 indicates a data frame */ + __IO uint8_t FF : 1; /*!< 1 selects Extended Frame Format (EFF); 0 selects Standard Frame + Format (SFF) */ + } FI_OR_ACR0_b; /*!< BitSize */ + }; + __I uint8_t RESERVED13[3]; + __IO uint8_t DI0_OR_ACR1; /*!< Transmit data Information if writting or Receive data Information + if reading, ACR[1] if reset mode */ + __I uint8_t RESERVED14[3]; + __IO uint8_t DI1_OR_ACR2; /*!< Transmit data Information if writting or Receive data Information + if reading, ACR[2] if reset mode */ + __I uint8_t RESERVED15[3]; + __IO uint8_t DI2_OR_ACR3; /*!< Transmit data Information if writting or Receive data Information + if reading, ACR[3] if reset mode */ + __I uint8_t RESERVED16[3]; + __IO uint8_t DI3_OR_AMR0; /*!< Transmit data Information if writting or Receive data Information + if reading, AMR[0] if reset mode */ + __I uint8_t RESERVED17[3]; + __IO uint8_t DI4_OR_AMR1; /*!< Transmit data Information if writting or Receive data Information + if reading, AMR[1] if reset mode */ + __I uint8_t RESERVED18[3]; + __IO uint8_t DI5_OR_AMR2; /*!< Transmit data Information if writting or Receive data Information + if reading, AMR[2] if reset mode */ + __I uint8_t RESERVED19[3]; + __IO uint8_t DI6_OR_AMR3; /*!< Transmit data Information if writting or Receive data Information + if reading, AMR[3] if reset mode */ + __I uint8_t RESERVED20[3]; + __IO uint8_t DI7; /*!< Transmit data Information if writting or Receive data Information + if reading */ + __I uint8_t RESERVED21[3]; + __IO uint8_t DI8; /*!< Transmit data Information if writting or Receive data Information + if reading */ + __I uint8_t RESERVED22[3]; + __IO uint8_t DI9; /*!< Transmit data Information if writting or Receive data Information + if reading */ + __I uint8_t RESERVED23[3]; + __IO uint8_t DI10; /*!< Transmit data Information if writting or Receive data Information + if reading */ + __I uint8_t RESERVED24[3]; + __IO uint8_t DI11; /*!< Transmit data Information if writting or Receive data Information + if reading */ + __I uint8_t RESERVED25[3]; + __IO uint8_t RMC; /*!< Receive Message Counter */ + __I uint8_t RESERVED26[7]; + + union { + __IO uint8_t CDR; /*!< Clock Divider Register */ + + struct { + __IO uint8_t DIVIDER : 3; /*!< divider of XTAL1 */ + __IO uint8_t OFF : 1; /*!< disable XTAL1 */ + } CDR_b; /*!< BitSize */ + }; +} CAN0_Type; + + +/* ================================================================================ */ +/* ================ DMA ================ */ +/* ================================================================================ */ + + +/** + * @brief DMA (DMA) + */ + +typedef struct { /*!< DMA Structure */ + __IO uint32_t SAR0; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED0; + __IO uint32_t DAR0; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED1; + + union { + __IO uint32_t LLP0; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED2; + + union { + __IO uint32_t CTL_LOW0; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI0; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI0_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT0; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED3; + __IO uint32_t DSTAT0; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED4; + __IO uint32_t SSTATAR0; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED5; + __IO uint32_t DSTATAR0; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED6; + + union { + __IO uint32_t CFG_LOW0; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI0; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR0; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED7; + + union { + __IO uint32_t DSR0; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED8; + __IO uint32_t SAR1; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED9; + __IO uint32_t DAR1; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED10; + + union { + __IO uint32_t LLP1; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED11; + + union { + __IO uint32_t CTL_LOW1; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI1; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI1_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT1; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED12; + __IO uint32_t DSTAT1; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED13; + __IO uint32_t SSTATAR1; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED14; + __IO uint32_t DSTATAR1; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED15; + + union { + __IO uint32_t CFG_LOW1; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI1; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR1; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED16; + + union { + __IO uint32_t DSR1; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED17; + __IO uint32_t SAR2; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED18; + __IO uint32_t DAR2; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED19; + + union { + __IO uint32_t LLP2; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED20; + + union { + __IO uint32_t CTL_LOW2; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI2; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI2_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT2; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED21; + __IO uint32_t DSTAT2; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED22; + __IO uint32_t SSTATAR2; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED23; + __IO uint32_t DSTATAR2; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED24; + + union { + __IO uint32_t CFG_LOW2; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI2; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR2; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED25; + + union { + __IO uint32_t DSR2; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED26; + __IO uint32_t SAR3; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED27; + __IO uint32_t DAR3; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED28; + + union { + __IO uint32_t LLP3; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED29; + + union { + __IO uint32_t CTL_LOW3; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI3; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI3_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT3; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED30; + __IO uint32_t DSTAT3; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED31; + __IO uint32_t SSTATAR3; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED32; + __IO uint32_t DSTATAR3; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED33; + + union { + __IO uint32_t CFG_LOW3; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI3; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR3; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED34; + + union { + __IO uint32_t DSR3; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED35; + __IO uint32_t SAR4; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED36; + __IO uint32_t DAR4; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED37; + + union { + __IO uint32_t LLP4; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED38; + + union { + __IO uint32_t CTL_LOW4; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI4; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI4_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT4; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED39; + __IO uint32_t DSTAT4; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED40; + __IO uint32_t SSTATAR4; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED41; + __IO uint32_t DSTATAR4; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED42; + + union { + __IO uint32_t CFG_LOW4; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI4; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR4; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED43; + + union { + __IO uint32_t DSR4; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED44; + __IO uint32_t SAR5; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED45; + __IO uint32_t DAR5; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED46; + + union { + __IO uint32_t LLP5; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED47; + + union { + __IO uint32_t CTL_LOW5; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI5; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI5_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT5; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED48; + __IO uint32_t DSTAT5; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED49; + __IO uint32_t SSTATAR5; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED50; + __IO uint32_t DSTATAR5; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED51; + + union { + __IO uint32_t CFG_LOW5; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI5; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR5; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED52; + + union { + __IO uint32_t DSR5; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED53; + __IO uint32_t SAR6; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED54; + __IO uint32_t DAR6; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED55; + + union { + __IO uint32_t LLP6; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED56; + + union { + __IO uint32_t CTL_LOW6; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI6; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI6_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT6; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED57; + __IO uint32_t DSTAT6; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED58; + __IO uint32_t SSTATAR6; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED59; + __IO uint32_t DSTATAR6; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED60; + + union { + __IO uint32_t CFG_LOW6; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI6; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR6; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED61; + + union { + __IO uint32_t DSR6; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED62; + __IO uint32_t SAR7; /*!< Current Source Address of DMA transfer */ + __I uint32_t RESERVED63; + __IO uint32_t DAR7; /*!< Current Destination Address of DMA transfer */ + __I uint32_t RESERVED64; + + union { + __IO uint32_t LLP7; /*!< Linked List Pointer Register for Channel */ + + struct { + __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that + stores the next linked list item resides. */ + __IO uint32_t LOC : 30; /*!< Starting Address In Memory of next LLI if block chaining is + enabled */ + } LLP7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED65; + + union { + __IO uint32_t CTL_LOW7; /*!< Lower 32-bits Control Register for Channel */ + + struct { + __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ + __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ + __IO uint32_t SRC_TR_WIDTH: 3; /*!< Source Transfer Width */ + __IO uint32_t DINC : 2; /*!< Destination Address Increment */ + __IO uint32_t SINC : 2; /*!< Source Address Increment */ + __IO uint32_t DEST_MSIZE : 3; /*!< Destination Burst Transaction Length */ + __IO uint32_t SRC_MSIZE : 3; /*!< Source Burst Transaction Length */ + __IO uint32_t SRC_GATHER_EN: 1; /*!< Source gather enable bit */ + __IO uint32_t DST_SCATTER_EN: 1; /*!< Destination scatter enable bit */ + uint32_t : 1; + __IO uint32_t TT_FC : 3; /*!< Transfer Type and Flow Control */ + __IO uint32_t DMS : 2; /*!< Destination Master Select */ + __IO uint32_t SMS : 2; /*!< Source Master Select */ + __IO uint32_t LLP_DST_EN : 1; /*!< Block chaining is enabled on the destination side */ + __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ + } CTL_LOW7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CTL_HI7; /*!< Higher 32-bits Control Register for Channel */ + + struct { + __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform + for every block transfer */ + __IO uint32_t DONE : 1; /*!< a block transfer is complete */ + } CTL_HI7_b; /*!< BitSize */ + }; + __IO uint32_t SSTAT7; /*!< Source Status Register for Channel */ + __I uint32_t RESERVED66; + __IO uint32_t DSTAT7; /*!< Destination Status Register for Channel */ + __I uint32_t RESERVED67; + __IO uint32_t SSTATAR7; /*!< Source Status Address Register for Channel */ + __I uint32_t RESERVED68; + __IO uint32_t DSTATAR7; /*!< Destination Status Address Register for Channel */ + __I uint32_t RESERVED69; + + union { + __IO uint32_t CFG_LOW7; /*!< Lower 32-bit Configuration Register for Channel */ + + struct { + uint32_t : 5; + __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ + __IO uint32_t CH_SUSP : 1; /*!< Suspends all DMA data transfers from the source until this bit + is cleared. */ + __I uint32_t FIFO_EMPTY : 1; /*!< Indicates if there is data left in the channel FIFO */ + __IO uint32_t HS_SEL_DST : 1; /*!< If Destination Software handshaking interface */ + __IO uint32_t HS_SEL_SRC : 1; /*!< If Source Software handshaking interface */ + __IO uint32_t LOCK_CH_L : 2; /*!< Indicates the duration over which CFGx.LOCK_CH bit applies. */ + __IO uint32_t LOCK_B_L : 2; /*!< Indicates the duration over which CFGx.LOCK_B bit applies. */ + __IO uint32_t LOCK_CH : 1; /*!< Channel Lock Bit */ + __IO uint32_t LOCK_B : 1; /*!< Bus Lock Bit */ + __IO uint32_t DST_HS_POL : 1; /*!< Destination Handshaking Interface Polarity. 0: active high */ + __IO uint32_t SRC_HS_POL : 1; /*!< Source Handshaking Interface Polarity. 0: active high */ + __IO uint32_t MAX_ABRST : 10; /*!< Maximum AMBA Burst Length */ + __IO uint32_t RELOAD_SRC : 1; /*!< Automatic Source Reload */ + __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ + } CFG_LOW7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CFG_HI7; /*!< Higher 32-bit Configuration Register for Channel */ + + struct { + __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination + Peripheral is the flow controller. */ + __IO uint32_t FIFO_MODE : 1; /*!< Determines space or data needs to be available in the FIFO before + a burst transaction request is serviced. */ + __IO uint32_t PROTCTL : 3; /*!< There is a one-to-one mapping of these register bits to the + HPROT[3:1] master interface signals */ + __IO uint32_t DS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ + } CFG_HI7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t SGR7; /*!< Source Gather Register for Channel */ + + struct { + __IO uint32_t SGI : 20; /*!< Source gather interval */ + __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ + } SGR7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED70; + + union { + __IO uint32_t DSR7; /*!< Destination Scatter Register for Channel */ + + struct { + __IO uint32_t DSI : 20; /*!< Destination scatter interval */ + __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of + CTLx.DST_TR_WIDTH */ + } DSR7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED71[11]; + __I uint8_t INT_TFR; /*!< DMA Transfer Complete */ + __I uint8_t RESERVED72[7]; + __I uint8_t INT_BLOCK; /*!< Block Transfer Complete */ + __I uint8_t RESERVED73[7]; + __I uint8_t INT_SRC_TRAN; /*!< Source Transaction Complete */ + __I uint8_t RESERVED74[7]; + __I uint8_t INT_DST_TRAN; /*!< Destination Transaction Complete */ + __I uint8_t RESERVED75[7]; + __I uint8_t INT_ERR; /*!< Error */ + __I uint8_t RESERVED76[7]; + + union { + __IO uint16_t INT_EN_TFR; /*!< DMA Transfer Complete */ + + struct { + __IO uint16_t EN : 8; /*!< interrupt enable */ + __IO uint16_t WE : 8; /*!< interrupt enable write enable */ + } INT_EN_TFR_b; /*!< BitSize */ + }; + __I uint16_t RESERVED77[3]; + + union { + __IO uint16_t INT_EN_BLOCK; /*!< Block Transfer Complete */ + + struct { + __IO uint16_t EN : 8; /*!< interrupt enable */ + __IO uint16_t WE : 8; /*!< interrupt enable write enable */ + } INT_EN_BLOCK_b; /*!< BitSize */ + }; + __I uint16_t RESERVED78[3]; + + union { + __IO uint16_t INT_EN_SRC_TRAN; /*!< Source Transaction Complete */ + + struct { + __IO uint16_t EN : 8; /*!< interrupt enable */ + __IO uint16_t WE : 8; /*!< interrupt enable write enable */ + } INT_EN_SRC_TRAN_b; /*!< BitSize */ + }; + __I uint16_t RESERVED79[3]; + + union { + __IO uint16_t INT_EN_DST_TRAN; /*!< Destination Transaction Complete */ + + struct { + __IO uint16_t EN : 8; /*!< interrupt enable */ + __IO uint16_t WE : 8; /*!< interrupt enable write enable */ + } INT_EN_DST_TRAN_b; /*!< BitSize */ + }; + __I uint16_t RESERVED80[3]; + + union { + __IO uint16_t INT_EN_ERR; /*!< Error */ + + struct { + __IO uint16_t EN : 8; /*!< interrupt enable */ + __IO uint16_t WE : 8; /*!< interrupt enable write enable */ + } INT_EN_ERR_b; /*!< BitSize */ + }; + __I uint16_t RESERVED81[3]; + __O uint8_t INT_CLEAR_TFR; /*!< DMA Transfer Complete */ + __I uint8_t RESERVED82[7]; + __O uint8_t INT_CLEAR_BLOCK; /*!< Block Transfer Complete */ + __I uint8_t RESERVED83[7]; + __O uint8_t INT_CLEAR_SRC_TRAN; /*!< Source Transaction Complete */ + __I uint8_t RESERVED84[7]; + __O uint8_t INT_CLEAR_DST_TRAN; /*!< Destination Transaction Complete */ + __I uint8_t RESERVED85[7]; + __O uint8_t INT_CLEAR_ERR; /*!< Error */ + __I uint8_t RESERVED86[63]; + + union { + __IO uint32_t DMA_EN; /*!< DW_ahb_dmac Configuration Register */ + + struct { + __IO uint32_t EN : 1; /*!< enable */ + } DMA_EN_b; /*!< BitSize */ + }; + __I uint32_t RESERVED87; + + union { + __IO uint32_t CH_EN; /*!< DW_ahb_dmac Channel Enable Register */ + + struct { + __IO uint32_t EN : 8; /*!< enable */ + __IO uint32_t WE : 8; /*!< enable write enable */ + } CH_EN_b; /*!< BitSize */ + }; + __I uint32_t RESERVED88[10]; + + union { + __I uint32_t DMA_COMP_PARAMS_6_HI; /*!< Component Parameters for channel 7 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_6_HI_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_5_LOW; /*!< Component Parameters for channel 6 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_5_LOW_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_5_HI; /*!< Component Parameters for channel 5 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_5_HI_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_4_LOW; /*!< Component Parameters for channel 4 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_4_LOW_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_4_HI; /*!< Component Parameters for channel 3 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_4_HI_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_3_LOW; /*!< Component Parameters for channel 2 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_3_LOW_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_3_HI; /*!< Component Parameters for channel 1 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_3_HI_b; /*!< BitSize */ + }; + + union { + __I uint32_t DMA_COMP_PARAMS_2_LOW; /*!< Component Parameters for channel 0 */ + + struct { + __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination + transfer width. */ + __I uint32_t STW : 3; /*!< If this is not hardcoded, then software can program the source + transfer width. */ + __I uint32_t STAT_DST : 1; /*!< If destination status load feature is on */ + __I uint32_t STAT_SRC : 1; /*!< If source status load feature is on */ + __I uint32_t DST_SCA_EN : 1; /*!< If destination scatter feature is on */ + __I uint32_t SRC_GAT_EN : 1; /*!< If source gather feature is on */ + __I uint32_t LOCK_EN : 1; /*!< If channel lock feature is on */ + __I uint32_t MULTI_BLK_EN: 1; /*!< If multi blocks transfer feature is on */ + __I uint32_t CTL_WB_EN : 1; /*!< If write back initial values to relative registers feature is + on */ + __I uint32_t HC_LLP : 1; /*!< If disable LLP feature is on */ + uint32_t : 2; + __I uint32_t MAX_MULT_SIZE: 3; /*!< Maximum value of burst transaction size (SRC_MSIZE and DEST_MSIZE). */ + __I uint32_t DMS : 3; /*!< Destination AHB dma interface */ + __I uint32_t LMS : 3; /*!< Linked list AHB dma interface */ + __I uint32_t SMS : 3; /*!< source AHB dma interface */ + __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ + } DMA_COMP_PARAMS_2_LOW_b; /*!< BitSize */ + }; + __I uint32_t RESERVED89; + + union { + __I uint32_t DMA_COMP_PARAMS_1_LOW; /*!< Maximum block size for channel */ + + struct { + __I uint32_t CH0_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 0. */ + __I uint32_t CH1_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 1 */ + __I uint32_t CH2_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 2 */ + __I uint32_t CH3_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 3 */ + __I uint32_t CH4_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 4 */ + __I uint32_t CH5_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 5 */ + __I uint32_t CH6_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 6 */ + __I uint32_t CH7_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 7 */ + } DMA_COMP_PARAMS_1_LOW_b; /*!< BitSize */ + }; +} DMA_Type; + + +/* ================================================================================ */ +/* ================ ETH ================ */ +/* ================================================================================ */ + + +/** + * @brief ETH (ETH) + */ + +typedef struct { /*!< ETH Structure */ + + union { + __IO uint32_t CONFIG; /*!< MAC Configuration Register */ + + struct { + __IO uint32_t PRELEN : 2; /*!< Preamble Length for Transmit frames */ + __IO uint32_t RX_EN : 1; /*!< Receiver Enable */ + __IO uint32_t TX_EN : 1; /*!< Transmitter Enable */ + __IO uint32_t DC_EN : 1; /*!< Deferral Check Enable */ + uint32_t : 2; + __IO uint32_t ACS : 1; /*!< Automatic Pad or CRC Stripping */ + __IO uint32_t LUD : 1; /*!< Link Up or Down */ + uint32_t : 1; + __IO uint32_t IPC : 1; /*!< Checksum Offload */ + __IO uint32_t DM : 1; /*!< Duplex Mode */ + __IO uint32_t LM : 1; /*!< Loopback Mode */ + uint32_t : 1; + __IO uint32_t FES : 1; /*!< Speed in XMII interface */ + __IO uint32_t PS : 1; /*!< the Ethernet line speed */ + uint32_t : 4; + __IO uint32_t JE : 1; /*!< Jumbo enable */ + uint32_t : 1; + __IO uint32_t JD : 1; /*!< if 0, the MAC cuts off the transmitter if more than 2,048 bytes + of data (10,240 if JE is set high) */ + __IO uint32_t WD : 1; /*!< Watchdog Disable */ + __IO uint32_t TC : 1; /*!< If 1, this bit enables the transmission of duplex mode, link + speed, and link up or down information to the PHY */ + __IO uint32_t CST : 1; /*!< CRC Stripping for Type Frames */ + uint32_t : 1; + __IO uint32_t TWOKPE : 1; /*!< If 0, 1518 bytes is considered as a giant frame, 1 is 2000 bytes. */ + __IO uint32_t SARC : 3; /*!< Source Address Insertion or Replacement Control */ + } CONFIG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t FF; /*!< MAC Frame Filter */ + + struct { + __IO uint32_t PR : 1; /*!< Receive all frames in spite of source and destination address */ + __IO uint32_t HUC : 1; /*!< if 1, don't compare DA field in destination address filtering + of unicast frames with DA register */ + __IO uint32_t HMC : 1; /*!< if 1, don't compare DA field in destination address filtering + of multicast frames with DA register */ + __IO uint32_t DAIF : 1; /*!< if set, the Address Check block operates in inverse filtering + mode for the DA address comparison */ + __IO uint32_t PM : 1; /*!< Pass All Multicast */ + __IO uint32_t DBF : 1; /*!< Disable Broadcast Frames */ + __IO uint32_t PCF : 2; /*!< Pass Control Frames */ + __IO uint32_t SAIF : 1; /*!< If set, the frames whose SA matches the SA registers are marked + as failing the SA Address filter */ + __IO uint32_t SAF : 1; /*!< Source Address Filter Enable */ + __IO uint32_t HPF : 1; /*!< Hash or Perfect Filter */ + uint32_t : 5; + __IO uint32_t VTFE : 1; /*!< VLAN Tag Filter Enable */ + uint32_t : 3; + __IO uint32_t IPFE : 1; /*!< Layer 3 and Layer 4 Filter Enable */ + __IO uint32_t DNTU : 1; /*!< Drop non-TCP/UDP over IP Frames */ + uint32_t : 9; + __IO uint32_t RA : 1; /*!< Receive all */ + } FF_b; /*!< BitSize */ + }; + __IO uint32_t HTH; /*!< Hash Table High Register */ + __IO uint32_t HTL; /*!< Hash Table Low Register */ + + union { + __IO uint32_t GMII_ADDR; /*!< GMII Address Register */ + + struct { + __IO uint32_t BUSY : 1; /*!< GMII Busy */ + __IO uint32_t GW : 1; /*!< GMII write or read */ + __IO uint32_t CR : 4; /*!< CSR Clock Range */ + __IO uint32_t GR : 5; /*!< These bits select the desired GMII register in the selected + PHY device */ + __IO uint32_t PA : 5; /*!< This field indicates which of the 32 possible PHY devices are + being accessed */ + } GMII_ADDR_b; /*!< BitSize */ + }; + __IO uint32_t GMII_DATA; /*!< GMII Data Register */ + + union { + __IO uint32_t FC; /*!< Flow Control Register */ + + struct { + __IO uint32_t FCB : 1; /*!< This bit initiates a Pause frame in the full-duplex mode */ + __IO uint32_t TFE : 1; /*!< MAC enables the flow control operation to transmit Pause frames */ + __IO uint32_t RFE : 1; /*!< MAC enables the flow control operation to receive Pause frames */ + __IO uint32_t UP : 1; /*!< MAC can detect Pause frames with unicast address of the station */ + } FC_b; /*!< BitSize */ + }; + + union { + __IO uint32_t VLAN_TAG; /*!< VLAN Tag Register */ + + struct { + __IO uint32_t VL : 16; /*!< VLAN Tag Identifier for Receive Frames */ + __IO uint32_t ETV : 1; /*!< Enable 12-Bit VLAN Tag Comparison */ + __IO uint32_t VTIM : 1; /*!< If set, The frames that do not have matching VLAN Tag are marked + as matched */ + __IO uint32_t ESVL : 1; /*!< If set, consider the S-VLAN (Type = 0x88A8) frames as valid + VLAN tagged frames */ + __IO uint32_t VTHM : 1; /*!< When set, the most significant four bits of the VLAN tag's CRC + are used to index the content */ + } VLAN_TAG_b; /*!< BitSize */ + }; + __I uint32_t RESERVED0[2]; + __IO uint32_t RWUFFR; /*!< Remote Wake-Up Frame Filter Register */ + + union { + __IO uint32_t PMTCSR; /*!< PMT Control and Status Register */ + + struct { + __IO uint32_t PWRDWN : 1; /*!< Power Down */ + __IO uint32_t MGKPKTEN : 1; /*!< Magic Packet Enable */ + __IO uint32_t RWKPKTEN : 1; /*!< Remote Wake-Up Frame Enable */ + uint32_t : 2; + __IO uint32_t MGKPRCVD : 1; /*!< the power management event is generated because of the reception + of a magic packet */ + __IO uint32_t RWKPRCVD : 1; /*!< When set, this bit indicates the power management event is generated + because of the reception of a remote wake-up frame */ + uint32_t : 2; + __IO uint32_t GLBLUCAST : 1; /*!< When set, enables any unicast packet filtered by the MAC (DAF)address + recognition to be a remote wake-up frame. */ + uint32_t : 14; + __IO uint32_t RWKPTR : 3; /*!< Remote Wake-up FIFO Pointer */ + uint32_t : 4; + __IO uint32_t RWKFILTRST : 1; /*!< Remote Wake-Up Frame Filter Register Pointer Reset. */ + } PMTCSR_b; /*!< BitSize */ + }; + __I uint32_t RESERVED1[2]; + __IO uint32_t MACISR; /*!< Interrupt Status Register */ + __IO uint32_t MACIMR; /*!< Interrupt Mask Register */ + __IO uint16_t ADDR0_HIGH; /*!< MAC Address0 High Register */ + __I uint16_t RESERVED2; + __IO uint32_t ADDR0_LOW; /*!< MAC Address0 LOW Register */ + + union { + __IO uint32_t ADDR1_HIGH; /*!< MAC Address0 High Register */ + + struct { + __IO uint32_t ADDR : 16; /*!< MAC Address1 [47:32] */ + uint32_t : 14; + __IO uint32_t SA : 1; /*!< MAC address1 is source or destination address compared with + received frame */ + __IO uint32_t AE : 1; /*!< the address filter module uses the MAC address1 for filtering */ + } ADDR1_HIGH_b; /*!< BitSize */ + }; + __IO uint32_t ADDR1_LOW; /*!< MAC Address1 LOW Register */ + __I uint32_t RESERVED3[44]; + + union { + __IO uint32_t MMCCR; /*!< MMC Control Register */ + + struct { + __IO uint32_t CNTRST : 1; /*!< Counters Reset */ + __IO uint32_t CNTSTOPRO : 1; /*!< Counter Stop Rollover */ + __IO uint32_t RSTONRD : 1; /*!< Reset on Read */ + __IO uint32_t CNTFREEZ : 1; /*!< MMC Counter Freeze */ + __IO uint32_t CNTPRST : 1; /*!< Counters Preset */ + __IO uint32_t CNTPRSTLVL : 1; /*!< Counters Preset */ + uint32_t : 2; + __IO uint32_t UCDBC : 1; /*!< Update MMC Counters for Dropped Broadcast Frames */ + } MMCCR_b; /*!< BitSize */ + }; + __IO uint32_t MMCRIR; /*!< MMC Receive Interrupt Register */ + __IO uint32_t MMCTIR; /*!< MMC Transmit Interrupt Register */ + __IO uint32_t MMCRIMR; /*!< MMC Receive interrupt mask */ + __IO uint32_t MMCTIMR; /*!< MMC Transmit Interrupt Mask */ + __I uint32_t RESERVED4[59]; + __IO uint32_t MMCIRCOIM; /*!< MMC IPC Receive Checksum Offload Interrupt Mask */ + __I uint32_t RESERVED5[319]; + + union { + __IO uint32_t PTPTSCR; /*!< Timestamp Control Register */ + + struct { + __IO uint32_t TSENA : 1; /*!< Timestamp Enable */ + __IO uint32_t TSCFUPDT : 1; /*!< Timestamp Fine or Coarse Update */ + __IO uint32_t TSINIT : 1; /*!< Timestamp Initialize */ + __IO uint32_t TSUPDT : 1; /*!< Timestamp Update */ + __IO uint32_t TSTRIG : 1; /*!< Timestamp Interrupt Trigger Enable */ + __IO uint32_t TSADDREG : 1; /*!< Addend Reg Update */ + } PTPTSCR_b; /*!< BitSize */ + }; + __IO uint32_t PTPSSIR; /*!< Sub-Second Increment Register */ + __IO uint32_t PTPTSHR; /*!< System Time Seconds Register */ + __IO uint32_t PTPTSLR; /*!< System Time Nanoseconds Register */ + __IO uint32_t PTPTSHUR; /*!< System Time Seconds Update Register */ + __IO uint32_t PTPTSLUR; /*!< System Time Nanoseconds Update Register */ + __IO uint32_t PTPTSAR; /*!< Timestamp Addend Register */ + __IO uint32_t PTPTTHR; /*!< Target Time Seconds Register */ + __IO uint32_t PTPTTLR; /*!< Target Time Nanoseconds Register */ + __I uint32_t RESERVED6[567]; + + union { + __IO uint32_t BUS_MODE; /*!< Flow Control Register */ + + struct { + __IO uint32_t SWR : 1; /*!< Software Reset */ + __IO uint32_t DA : 1; /*!< This bit specifies the arbitration scheme between the transmit + and receive paths of Channel */ + __IO uint32_t DSL : 5; /*!< the byte number of bus width to skip between two unchained descriptors */ + __IO uint32_t ATDS : 1; /*!< When set, the size of the alternate descriptor increases to + 32 bytes */ + __IO uint32_t PBL : 6; /*!< These bits indicate the maximum number of beats to be transferred + in one DMA transaction */ + __IO uint32_t PR : 2; /*!< The Priority Ratio is (PR + 1) : 1 */ + __IO uint32_t FB : 1; /*!< performs fixed burst transfers or not */ + __IO uint32_t RPBL : 6; /*!< This field indicates the maximum number of beats to be transferred + in one Rx DMA transaction */ + __IO uint32_t USP : 1; /*!< If set, RPBL is same as RPBL definition */ + __IO uint32_t PBLx8 : 1; /*!< If set, all PBLs multiplies 8 */ + __IO uint32_t AAL : 1; /*!< If set, all bursts aligned to the start address LS bits */ + __IO uint32_t MB : 1; /*!< When this bit is set high and the FB bit is low, the AHB master + interface starts all bursts of length more than 16 with INCR */ + __IO uint32_t TXPR : 1; /*!< When set, the transmit DMA has higher priority than the receive + DMA */ + __IO uint32_t PRWG : 2; /*!< The Priority weight is (PRWG + 1) : 1 */ + uint32_t : 1; + __IO uint32_t RIB : 1; /*!< If set, rebuilds the pending beats of any burst transfer initiated + with INCRx */ + } BUS_MODE_b; /*!< BitSize */ + }; + __IO uint32_t TPD; /*!< Transmit Poll Demand */ + __IO uint32_t RPD; /*!< Receive Poll Demand */ + __IO uint32_t RDESLA; /*!< Receive Descriptor List Address */ + __IO uint32_t TDESLA; /*!< Transmit Descriptor List Address */ + + union { + __IO uint32_t STATUS; /*!< Status Register */ + + struct { + __IO uint32_t TI : 1; /*!< This bit indicates that the frame transmission is complete */ + __IO uint32_t TPS : 1; /*!< Transmit Process Stopped */ + __IO uint32_t TU : 1; /*!< the host owns the Next Descriptor in the Transmit List and the + DMA cannot acquire it. */ + __IO uint32_t TJT : 1; /*!< Transmit Jabber Timeout */ + __IO uint32_t OVF : 1; /*!< Receive Overflow */ + __IO uint32_t UNF : 1; /*!< Transmit Underflow */ + __IO uint32_t RI : 1; /*!< the frame reception is complete */ + __IO uint32_t RU : 1; /*!< Receive Buffer Unavailable */ + __IO uint32_t RPS : 1; /*!< Receive Process Stopped */ + __IO uint32_t RWT : 1; /*!< Receive Watchdog Timeout */ + __IO uint32_t ETI : 1; /*!< the frame to be transmitted is fully transferred to the MTL + Transmit FIFO */ + uint32_t : 2; + __IO uint32_t FBI : 1; /*!< a bus error occurred, as described in EB. */ + __IO uint32_t ERI : 1; /*!< the DMA filled the first data buffer of the packet */ + __IO uint32_t AIS : 1; /*!< Abnormal Interrupt Summary, must be cleared by writting */ + __IO uint32_t NIS : 1; /*!< Normal Interrupt Summary, must be cleared by writting */ + __I uint32_t RS : 3; /*!< Receive DMA FSM state */ + __I uint32_t TS : 3; /*!< Transmit DMA FSM state */ + __I uint32_t EB : 3; /*!< Error bit */ + __I uint32_t GLI : 1; /*!< GMAC Line Interface Interrupt */ + __I uint32_t GMI : 1; /*!< GMAC MMC Interrupt */ + __I uint32_t GPI : 1; /*!< GMAC PMT Interrupt */ + __I uint32_t TTI : 1; /*!< Timestamp Trigger Interrupt */ + } STATUS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t OPERATION; /*!< Operation Mode Register */ + + struct { + uint32_t : 1; + __IO uint32_t SR : 1; /*!< Start or Stop Receive */ + __IO uint32_t OSF : 1; /*!< Operate on Second Frame */ + __IO uint32_t RT : 2; /*!< Receive Threshold Control */ + __IO uint32_t DGF : 1; /*!< Drop Giant Frames */ + __IO uint32_t FUF : 1; /*!< Forward Undersized Good Frames */ + __IO uint32_t FEF : 1; /*!< Forward Error Frames */ + uint32_t : 5; + __IO uint32_t ST : 1; /*!< Start or Stop Transmission Command */ + __IO uint32_t TT : 3; /*!< Transmit Threshold Control */ + uint32_t : 3; + __IO uint32_t FTF : 1; /*!< Flush Transmit FIFO */ + __IO uint32_t TSF : 1; /*!< If set, transmission starts when a full frame resides in Transmit + FIFO */ + uint32_t : 2; + __IO uint32_t DFF : 1; /*!< Disable Flushing of Received Frames */ + __IO uint32_t RSF : 1; /*!< If set, the MTL reads a frame from the Rx FIFO while the complete + frame has been written to it, */ + } OPERATION_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INT_EN; /*!< Interrupt Enable Register */ + + struct { + __IO uint32_t TIE : 1; /*!< Transmit Interrupt Enable */ + __IO uint32_t TSE : 1; /*!< Transmit Stopped Enable */ + __IO uint32_t TUE : 1; /*!< Transmit Buffer Unavailable Enable */ + __IO uint32_t TJE : 1; /*!< Transmit Jabber Timeout Enable */ + __IO uint32_t OVE : 1; /*!< Overflow Interrupt Enable */ + __IO uint32_t UNE : 1; /*!< Underflow Interrupt Enable */ + __IO uint32_t RIE : 1; /*!< Receive Interrupt Enable */ + __IO uint32_t RUE : 1; /*!< Receive Buffer Unavailable Enable */ + __IO uint32_t RSE : 1; /*!< Receive Stopped Enable */ + __IO uint32_t RWE : 1; /*!< Receive Watchdog Timeout Enable */ + __IO uint32_t ETE : 1; /*!< Early Transmit Interrupt Enable */ + uint32_t : 2; + __IO uint32_t FBE : 1; /*!< Fatal Bus Error Enable */ + __IO uint32_t ERE : 1; /*!< Early Receive Interrupt Enable */ + __IO uint32_t AIE : 1; /*!< Abnormal Interrupt Summary Enable */ + __IO uint32_t NIE : 1; /*!< Normal Interrupt Summary Enable */ + } INT_EN_b; /*!< BitSize */ + }; + __I uint32_t RESERVED7[3]; + + union { + __IO uint32_t AHB_STATUS; /*!< AHB Status Register */ + + struct { + __IO uint32_t BUSY : 1; /*!< If set, it indicates that the AHB master interface FSMs are + in the non-idle state */ + } AHB_STATUS_b; /*!< BitSize */ + }; + __I uint32_t RESERVED8[6]; + __I uint32_t CURTDESAPTR; /*!< Current Host Transmit Descriptor Register */ + __I uint32_t CURRDESAPTR; /*!< Current Host Receive Descriptor Register */ + __I uint32_t CURTBUFAPTR; /*!< Current Host Transmit Buffer Address Register */ + __I uint32_t CURRBUFAPTR; /*!< Current Host Receive Buffer Address Register */ +} ETH_Type; + + +/* ================================================================================ */ +/* ================ USB ================ */ +/* ================================================================================ */ + + +/** + * @brief USB (USB) + */ + +typedef struct { /*!< USB Structure */ + + union { + __IO uint32_t GOTGCTL; /*!< Control and Status register */ + + struct { + __I uint32_t SES_REQ_SCS: 1; /*!< set when a session request initiation is successful as a device */ + __IO uint32_t SES_SEQ : 1; /*!< set to initiate a session request on the USB as a device */ + __IO uint32_t VB_VALID_OV_EN: 1; /*!< enable/disable the software to override the Bvalid signal using + the GOTGCTL.VbvalidOvVal as a host */ + __IO uint32_t VB_VALID_OV_VAL: 1; /*!< set Override value for vbusvalid signal when GOTGCTL.VbvalidOvEn + is set as a host */ + __IO uint32_t A_VALID_OV_EN: 1; /*!< enable/disable the software to override the Avalid signal using + the GOTGCTL.AvalidOvVal as a host */ + __IO uint32_t A_VALID_OV_VAL: 1; /*!< set Override value for Avalid signal when GOTGCTL.AvalidOvEn + is set as a host */ + __IO uint32_t B_VALID_OV_EN: 1; /*!< enable/disable the software to override the Bvalid signal using + the GOTGCTL.BvalidOvVal as a device. */ + __IO uint32_t B_VALID_OV_VAL: 1; /*!< set Override value for Bvalid signal when GOTGCTL.BvalidOvEn + is set as a device. */ + __I uint32_t HST_NEG_SCS: 1; /*!< sets when host negotiation is successful as a device. */ + __IO uint32_t HNP_REQ : 1; /*!< sets this bit to initiate an HNP request to the connected USB + host as a device */ + __IO uint32_t HST_SET_HNP_EN: 1; /*!< Host Set HNP Enable as a host */ + __IO uint32_t DEV_HNP_EN : 1; /*!< Device HNP Enabled as a device */ + uint32_t : 4; + __I uint32_t CON_ID_STS : 1; /*!< Connector ID Status */ + __I uint32_t DBNC_TIME : 1; /*!< the debounce time of a detected connection as a host */ + __I uint32_t A_SES_VLD : 1; /*!< A-Session Valid as a host */ + __I uint32_t B_SES_VLD : 1; /*!< B-Session Valid as a host */ + __IO uint32_t OTG_VER : 1; /*!< If 0, OTG Version 1.3. If 1, OTG Version 2.0. */ + } GOTGCTL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GOTGINT; /*!< OTG interrupt Register */ + + struct { + uint32_t : 2; + __IO uint32_t SES_END_DET: 1; /*!< Set when the utmiotg_bvalid signal is deasserted */ + uint32_t : 5; + __IO uint32_t SES_REQ_SUC_STS_CHNG: 1; /*!< Session Request Success Status Change */ + __IO uint32_t HST_NEG_SUC_STS_CHNG: 1; /*!< Host Negotiation Success Status Change */ + uint32_t : 7; + __IO uint32_t HST_NEG_DET: 1; /*!< if set, detects a host negotiation request on the USB */ + __IO uint32_t A_DEV_TOUT_CHG: 1; /*!< A-device has timed out while waiting for the B-device to connect */ + __IO uint32_t DBNCE_DONE : 1; /*!< debounce is completed after the device connect as a host */ + } GOTGINT_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GAHBCFG; /*!< AHB Configuration Register */ + + struct { + __IO uint32_t GLBL_INTR_EN: 1; /*!< Global Interrupt Enable */ + __IO uint32_t BST_LEN : 4; /*!< Burst Length/Type */ + __IO uint32_t DMA_EN : 1; /*!< DMA enable */ + uint32_t : 15; + __IO uint32_t REMOTE_MEM_SUPP: 1; /*!< enable the functionality to wait for the system DMA Done Signal + for the DMA Write Transfers */ + __IO uint32_t NOTIFY_ALL_DMA_WRITE: 1; /*!< enable the System DMA Done functionality for all the DMA write + Transactions corresponding to the Channel/Endpoint */ + __IO uint32_t AHB_SINGLE : 1; /*!< supports Single transfers for the remaining data in a transfer */ + } GAHBCFG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GUSBCFG; /*!< USB Configuration Register */ + + struct { + uint32_t : 3; + __IO uint32_t PHY_IF : 1; /*!< PHY Interface */ + __IO uint32_t ULPI_UTMI_SEL: 1; /*!< 1, ULPI. 0, UTMI+ */ + __IO uint32_t FS_IF : 1; /*!< 1, 3-pin bidirectional. 0, 6-pin unidirectional */ + __IO uint32_t PHY_SEL : 1; /*!< 0, USB 2.0 High-Speed PHY. 1, USB 1.1 full-speed serial transceiver */ + __IO uint32_t DDR_SEL : 1; /*!< 0, Single Data Rate ULPI Interface, with 8-bit-wide data bus. + 1, Double Data Rate ULPI Interface, with 4-bit-wide data bus */ + __IO uint32_t SRP_CAP : 1; /*!< SRP-Capable */ + __IO uint32_t HNP_CAP : 1; /*!< HNP-Capable */ + __IO uint32_t USB_TRD_TIM: 4; /*!< Specifies the response time for a MAC request to the Packet + FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM) as + a device. */ + uint32_t : 1; + __IO uint32_t PHY_LPWR_CLK_SEL: 1; /*!< 0, 480-MHz Internal PLL clock. 1, 48-MHz External Clock */ + uint32_t : 12; + __IO uint32_t TX_END_DELAY: 1; /*!< Tx End Delay as a device */ + __IO uint32_t FORCE_HOST_MODE: 1; /*!< Force Host Mode */ + __IO uint32_t FORCE_DEVICE_MODE: 1; /*!< Force Device Mode */ + } GUSBCFG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GRSTCTL; /*!< Reset Register */ + + struct { + __IO uint32_t CORE_SOFT_RST: 1; /*!< Core Soft Reset */ + uint32_t : 1; + __IO uint32_t FRM_CNT_RST: 1; /*!< Host Frame Counter Reset */ + uint32_t : 1; + __IO uint32_t RX_FIFO_FLUSH: 1; /*!< RxFIFO Flush */ + __IO uint32_t TX_FIFO_FLUSH: 1; /*!< TxFIFO Flush */ + __IO uint32_t TX_FIFO_FLUSH_NUM: 4; /*!< This field indicates which of the 32 possible PHY devices are + being accessed */ + __IO uint32_t TX_FIFO_ALL: 1; /*!< TxFIFO flush all FIFOs */ + uint32_t : 19; + __I uint32_t DMA_REQ : 1; /*!< Indicates that the DMA request is in progress */ + __I uint32_t AHB_IDLE : 1; /*!< Indicates that the AHB Master State Machine is in the IDLE condition */ + } GRSTCTL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GINTSTS; /*!< Interrupt Register */ + + struct { + __I uint32_t CUR_MOD : 1; /*!< Current Mode of Operation */ + __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch Interrupt */ + __I uint32_t OTG_INT : 1; /*!< OTG Interrupt */ + __IO uint32_t SOF : 1; /*!< Start of (micro)Frame */ + __I uint32_t RFNE : 1; /*!< RxFIFO Non-Empty */ + __I uint32_t NPTFE : 1; /*!< Non-periodic TxFIFO Empty */ + __I uint32_t GIN_NAK_EFF: 1; /*!< Global IN Non-periodic NAK Effective as a device */ + __I uint32_t GOUT_NAK_EFF: 1; /*!< Global OUT NAK Effective as a device */ + uint32_t : 2; + __IO uint32_t EARLY_SUS : 1; /*!< an Idle state has been detected on the USB For 3 ms as a device */ + __IO uint32_t USB_SUS : 1; /*!< A suspend was detected on the USB as a device */ + __IO uint32_t USB_RST : 1; /*!< A reset is detected on the USB as a device */ + __IO uint32_t ENUM_DONE : 1; /*!< speed enumeration is complete as a device */ + __IO uint32_t ISO_OUT_DROP: 1; /*!< Drop an isochronous OUT packet while no space in RXFIFO as a + device */ + __IO uint32_t EOPF : 1; /*!< End of Periodic Frame Interrupt as a device */ + uint32_t : 1; + __I uint32_t EP_MIS : 1; /*!< Endpoint Mismatch Interrupt as a device */ + __I uint32_t IEP_INT : 1; /*!< IN Endpoints Interrupt as a device */ + __I uint32_t OEP_INT : 1; /*!< OUT Endpoints Interrupt as a device */ + __IO uint32_t INCOMP_ISO_IN: 1; /*!< Incomplete Isochronous IN Transfer as a device */ + __IO uint32_t IPT_IIOT : 1; /*!< OUT Incomplete Periodic Transfer as a host or Incomplete Isochronous + OUT Transfer as a device */ + __IO uint32_t DFS : 1; /*!< Data Fetch Suspended as a device */ + __IO uint32_t RST_DET : 1; /*!< reset detect as a device */ + __I uint32_t HP : 1; /*!< a change in port status of one of the DWC_otg core ports as + a host */ + __I uint32_t HC : 1; /*!< an interrupt is pending on one of the channels of the core as + a host */ + __I uint32_t PTFE : 1; /*!< Periodic TxFIFO Empty as a host */ + __IO uint32_t LPM : 1; /*!< LPM Transaction Received Interrupt */ + __IO uint32_t CIDSC : 1; /*!< A change in connector ID status */ + __IO uint32_t DD : 1; /*!< A change in connector ID status */ + __IO uint32_t SR : 1; /*!< Session Request/New Session Detected Interrupt */ + __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */ + } GINTSTS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GINTEN; /*!< Interrupt enable Register */ + + struct { + uint32_t : 1; + __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch */ + __IO uint32_t OTG_INT : 1; /*!< OTG */ + __IO uint32_t SOF : 1; /*!< Start of (micro)Frame */ + __IO uint32_t RFNE : 1; /*!< RxFIFO Non-Empty */ + __IO uint32_t NPTFE : 1; /*!< Non-periodic TxFIFO Empty */ + __IO uint32_t GIN_NAK_EFF: 1; /*!< Global IN Non-periodic NAK Effective as a device */ + __IO uint32_t GOUT_NAK_EFF: 1; /*!< Global OUT NAK Effective as a device */ + uint32_t : 2; + __IO uint32_t EARLY_SUS : 1; /*!< an Idle state has been detected on the USB For 3 ms as a device */ + __IO uint32_t USB_SUS : 1; /*!< A suspend was detected on the USB as a device */ + __IO uint32_t USB_RST : 1; /*!< A reset is detected on the USB as a device */ + __IO uint32_t ENUM_DONE : 1; /*!< speed enumeration is complete as a device */ + __IO uint32_t ISO_OUT_DROP: 1; /*!< Drop an isochronous OUT packet while no space in RXFIFO as a + device */ + __IO uint32_t EOPF : 1; /*!< End of Periodic Frame Interrupt as a device */ + uint32_t : 1; + __IO uint32_t EP_MIS : 1; /*!< Endpoint Mismatch Interrupt as a device */ + __IO uint32_t IEP_INT : 1; /*!< IN Endpoints Interrupt as a device */ + __IO uint32_t OEP_INT : 1; /*!< OUT Endpoints Interrupt as a device */ + __IO uint32_t INCOMP_ISO_IN: 1; /*!< Incomplete Isochronous IN Transfer as a device */ + __IO uint32_t IPT_IIOT : 1; /*!< OUT Incomplete Periodic Transfer as a host or Incomplete Isochronous + OUT Transfer as a device */ + __IO uint32_t DFS : 1; /*!< Data Fetch Suspended as a device */ + __IO uint32_t RST_DET : 1; /*!< reset detect as a device */ + __IO uint32_t HP : 1; /*!< a change in port status of one of the DWC_otg core ports as + a host */ + __IO uint32_t HC : 1; /*!< an interrupt is pending on one of the channels of the core as + a host */ + __IO uint32_t PTFE : 1; /*!< Periodic TxFIFO Empty as a host */ + __IO uint32_t LPM : 1; /*!< LPM Transaction Received Interrupt */ + __IO uint32_t CIDSC : 1; /*!< A change in connector ID status */ + __IO uint32_t DD : 1; /*!< A change in connector ID status */ + __IO uint32_t SR : 1; /*!< Session Request/New Session Detected Interrupt */ + __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */ + } GINTEN_b; /*!< BitSize */ + }; + + union { + __I uint32_t GRXSTSR; /*!< Returns the contents of the top of the Receive FIFO */ + + struct { + __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */ + __I uint32_t BCNT : 11; /*!< byte count of the received packet */ + __I uint32_t DPID : 2; /*!< Data PID of the received packet */ + __I uint32_t PS : 4; /*!< the status of the received packet */ + __I uint32_t FN : 4; /*!< the least significant 4 bits of the (micro)frame number in which + the packet is received on the USB */ + } GRXSTSR_b; /*!< BitSize */ + }; + + union { + __I uint32_t GRXSTSP; /*!< Pop the contents of the top of the Receive FIFO */ + + struct { + __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */ + __I uint32_t BCNT : 11; /*!< byte count of the received packet */ + __I uint32_t DPID : 2; /*!< Data PID of the received packet */ + __I uint32_t PS : 4; /*!< the status of the received packet */ + __I uint32_t FN : 4; /*!< the least significant 4 bits of the (micro)frame number in which + the packet is received on the USB */ + } GRXSTSP_b; /*!< BitSize */ + }; + __IO uint16_t GRXFSIZ; /*!< This value is in terms of 32-bit words, 16 is minimize and 32768 + is max */ + __I uint16_t RESERVED0; + + union { + __IO uint32_t GNPTXFSIZ; /*!< Non-Periodic Transmit FIFO Size Register */ + + struct { + __IO uint32_t NTRSA_INEF0TRSA: 16; /*!< start address for Non-periodic Transmit FIFO RAM as a host or + IN Endpoint FIFO0 Transmit RAM as a device */ + __IO uint32_t NTD_INEF0TD: 16; /*!< This value is in terms of 32-bit words, 16 is minimize and 32768 + is max. Non-periodic TxFIFO Depth as a host or IN Endpoint TxFIFO + 0 Depth as a device */ + } GNPTXFSIZ_b; /*!< BitSize */ + }; + + union { + __I uint32_t GNPTXSTS; /*!< Non-Periodic Transmit FIFO/Queue Status Register */ + + struct { + __I uint32_t NTSA : 16; /*!< the amount of free space available in the Non-periodic TxFIFO, + max is 32768. */ + __I uint32_t NTRQSA : 8; /*!< the amount of free space available in the Non-periodic Transmit + Request Queue, max is 8. */ + __I uint32_t TNTRQ_LAST : 1; /*!< last Entry in the Non-periodic Tx Request Queue that is currently + being processed by the MAC */ + __I uint32_t TNTRQ_TYPE : 2; /*!< type in the Non-periodic Tx Request Queue that is currently + being processed by the MAC */ + __I uint32_t TNTRQ_CH : 4; /*!< Channel of top of the Non-periodic Transmit Request Queue */ + } GNPTXSTS_b; /*!< BitSize */ + }; + __I uint32_t RESERVED1[5]; + + union { + __I uint32_t GHWCFG1; /*!< User HW Config1 Register */ + + struct { + __I uint32_t EP0_DIR : 2; /*!< Endpoint 0 direction, always Bidirection */ + __I uint32_t EP1_DIR : 2; /*!< Endpoint 1 direction */ + __I uint32_t EP2_DIR : 2; /*!< Endpoint 2 direction */ + __I uint32_t EP3_DIR : 2; /*!< Endpoint 3 direction */ + __I uint32_t EP4_DIR : 2; /*!< Endpoint 4 direction */ + __I uint32_t EP5_DIR : 2; /*!< Endpoint 5 direction */ + __I uint32_t EP6_DIR : 2; /*!< Endpoint 6 direction */ + __I uint32_t EP7_DIR : 2; /*!< Endpoint 7 direction */ + __I uint32_t EP8_DIR : 2; /*!< Endpoint 8 direction */ + __I uint32_t EP9_DIR : 2; /*!< Endpoint 9 direction */ + __I uint32_t EP10_DIR : 2; /*!< Endpoint 10 direction */ + __I uint32_t EP11_DIR : 2; /*!< Endpoint 11 direction */ + __I uint32_t EP12_DIR : 2; /*!< Endpoint 12 direction */ + __I uint32_t EP13_DIR : 2; /*!< Endpoint 13 direction */ + __I uint32_t EP14_DIR : 2; /*!< Endpoint 14 direction */ + __I uint32_t EP15_DIR : 2; /*!< Endpoint 15 direction */ + } GHWCFG1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED2[3]; + + union { + __IO uint32_t GLPMCFG; /*!< Core LPM Configuration Register */ + + struct { + __IO uint32_t EP0_DIR : 1; /*!< LPM capability is enabled */ + } GLPMCFG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GPWRDN; /*!< Global Power Down Register */ + + struct { + uint32_t : 1; + __IO uint32_t PMU_ACTIVE : 1; /*!< PMU Active is enabled */ + uint32_t : 1; + __IO uint32_t PDC : 1; /*!< Power Down Clamp is enabled */ + __IO uint32_t PDR : 1; /*!< If clear, Reset DWC_otg */ + __IO uint32_t PDS : 1; /*!< If 0, DWC_otg is in ON state, or OFF state */ + __IO uint32_t DIS_VBUS : 1; /*!< Disable VBUS */ + uint32_t : 8; + __IO uint32_t SRP_DETECT_INT: 1; /*!< SRP has been detected by the PMU as a host */ + __IO uint32_t SRP_DETECT_INT_EN: 1; /*!< Enable For SRPDetect Interrupt as a host */ + __IO uint32_t STATE_CHN_INT: 1; /*!< a status change in either the IDDIG or BSessVld signal */ + __IO uint32_t STATE_CHN_INT_EN: 1; /*!< Enable For Status Change Interrupt */ + __I uint32_t LINE_STATE : 2; /*!< the current linestate on USB as seen by the PMU module */ + __I uint32_t IDDIG : 1; /*!< the status of the IDDIG signal. If 0, host mode. if 1, device + mode */ + __I uint32_t B_SESS_VLD : 1; /*!< B session valid status signal from the PHY */ + __IO uint32_t ADP_INT : 1; /*!< set whenever there is a ADP event */ + } GPWRDN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t GDFIFOCFG; /*!< Global DFIFO Software Config Register */ + + struct { + __IO uint32_t GDFIFOCFG : 16; /*!< This field is for dynamic programming of the DFIFO Size. */ + __IO uint32_t EPIBA : 16; /*!< This field provides the start address of the EP info controller */ + } GDFIFOCFG_b; /*!< BitSize */ + }; + __I uint32_t RESERVED3[40]; + + union { + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Transmit FIFO Size Register */ + + struct { + __IO uint32_t HPTSA : 16; /*!< start address of the Periodic TxFIFO */ + __IO uint32_t EPIBA : 16; /*!< the size of the Periodic TxFIFO */ + } HPTXFSIZ_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF1; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF2; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF3; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF4; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF5; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF6; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF7; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF8; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF8_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF9; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF9_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF10; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF10_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF11; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF11_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF12; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF12_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF13; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF13_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF14; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF14_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DIEPTXF15; /*!< Device In Endpoint Transmit FIFO Size Register */ + + struct { + __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ + } DIEPTXF15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED4[176]; + + union { + __IO uint32_t HCFG; /*!< Host Configuration Register */ + + struct { + __IO uint32_t FS_LS_PCS : 2; /*!< FS/LS PHY Clock Select as a host */ + __IO uint32_t FS_LS_SUPPORT: 1; /*!< If set, FS/LS-only, even If the connected device can support + HS */ + uint32_t : 4; + __IO uint32_t EN_32K_SUS : 1; /*!< Enable 32 KHz Suspend mode */ + __IO uint32_t RVP : 8; /*!< ResValid number of clock cycles to detect a valid resume */ + uint32_t : 7; + __IO uint32_t EN_SG_DMA : 1; /*!< Enable Scatter/gather DMA in Host mode */ + __IO uint32_t FLE : 2; /*!< the number of entries in the Frame list. 8 times of FLE */ + __IO uint32_t EPS : 1; /*!< Enables periodic scheduling */ + uint32_t : 4; + __IO uint32_t MCRTE : 1; /*!< enable/disable the Host core to wait 200 PHY clock cycles at + the end of Resume to change the opmode signal to the PHY to + 00 after Suspend or LPM. */ + } HCFG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HFIR; /*!< Host Frame Interval Register */ + + struct { + __IO uint32_t FI : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ + __IO uint32_t RC : 1; /*!< The HFIR can be dynamically reloaded during runtime if set */ + } HFIR_b; /*!< BitSize */ + }; + + union { + __I uint32_t HFNUM; /*!< Host Frame Number/Frame Time Remaining Register */ + + struct { + __I uint32_t FN : 16; /*!< This field increments when a new SOF is transmitted on the USB */ + __I uint32_t FTR : 16; /*!< amount of time remaining in the current microframe (HS) or Frame + (FS/LS), in terms of PHY clocks */ + } HFNUM_b; /*!< BitSize */ + }; + __I uint32_t RESERVED5; + + union { + __I uint32_t HPTXSTS; /*!< Host Periodic Transmit FIFO/Queue Status Register */ + + struct { + __I uint32_t PTDFSA : 16; /*!< Indicates the number of free locations available to be written + to in the Periodic TxFIFO, max is 32768 */ + __I uint32_t PTRQSA : 8; /*!< Indicates the number of free locations available to be written + in the Periodic Transmit Request Queue, max is 16 */ + __I uint32_t TPTRQ_LAST : 1; /*!< last Entry in the periodic Tx Request Queue that is currently + being processed by the MAC */ + __I uint32_t TPTRQ_TYPE : 2; /*!< type in the periodic Tx Request Queue that is currently being + processed by the MAC */ + __I uint32_t TPTRQ_CH : 4; /*!< Channel of top of the periodic Transmit Request Queue */ + __I uint32_t TPTRQ_ODD_FRAME: 1; /*!< If set, send in odd (micro)Frame */ + } HPTXSTS_b; /*!< BitSize */ + }; + + union { + __I uint32_t HAINT; /*!< Host All Channels Interrupt Register */ + + struct { + __I uint32_t INT : 16; /*!< Channel Interrupts, from 0 to 15. */ + } HAINT_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HAINT_EN; /*!< Host All Channels Interrupt Enable Register */ + + struct { + __IO uint32_t EN : 16; /*!< Channel Interrupts Enable, from 0 to 15. */ + } HAINT_EN_b; /*!< BitSize */ + }; + __IO uint32_t HFLBA; /*!< The starting address of the Frame list */ + __I uint32_t RESERVED6[8]; + + union { + __IO uint32_t __HPRT; /*!< Host Port Control and Status Register */ + + struct { + __I uint32_t PCS : 1; /*!< If a device is attached to the port */ + __IO uint32_t PCD : 1; /*!< A device connection is detected */ + __IO uint32_t PE : 1; /*!< Port Enable */ + __IO uint32_t PEDC : 1; /*!< Set if when the status of the Port Enable (bit 2) of this register + changes */ + __I uint32_t POA : 1; /*!< Indicates the overcurrent condition of the port */ + __IO uint32_t POC : 1; /*!< Set if when the status of the Port Overcurrent Active bit (bit + 4) in this register changes */ + __IO uint32_t PR : 1; /*!< Application and Core all can perform resume by setting, then + clear it whatever resume is success or not */ + __IO uint32_t PS : 1; /*!< Sets this bit to put this port in Suspend mode */ + __IO uint32_t PRESET : 1; /*!< sets this bit, a reset sequence is started on this port */ + uint32_t : 1; + __IO uint32_t PLSDP : 1; /*!< Logic level of D+ */ + __IO uint32_t PLSDN : 1; /*!< Logic level of D- */ + __IO uint32_t PP : 1; /*!< this field to control power to this port. 1, power on */ + __IO uint32_t PTC : 4; /*!< The application writes a nonzero value to this field to put + the port into a Test mode */ + __I uint32_t SPEED : 2; /*!< Indicates the speed of the device attached to this port */ + } __HPRT_b; /*!< BitSize */ + }; + __I uint32_t RESERVED7[47]; + + union { + __IO uint32_t HCC0; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED8; + + union { + __IO uint32_t HCINT0; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN0; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ0; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA0; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED9; + __IO uint32_t HCDMAB0; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC1; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED10; + + union { + __IO uint32_t HCINT1; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN1; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ1; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA1; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED11; + __IO uint32_t HCDMAB1; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC2; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED12; + + union { + __IO uint32_t HCINT2; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN2; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ2; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA2; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED13; + __IO uint32_t HCDMAB2; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC3; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED14; + + union { + __IO uint32_t HCINT3; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN3; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ3; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA3; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED15; + __IO uint32_t HCDMAB3; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC4; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED16; + + union { + __IO uint32_t HCINT4; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN4; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ4; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ4_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA4; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED17; + __IO uint32_t HCDMAB4; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC5; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED18; + + union { + __IO uint32_t HCINT5; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN5; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ5; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ5_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA5; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED19; + __IO uint32_t HCDMAB5; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC6; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED20; + + union { + __IO uint32_t HCINT6; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN6; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ6; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ6_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA6; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED21; + __IO uint32_t HCDMAB6; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC7; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED22; + + union { + __IO uint32_t HCINT7; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN7; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ7; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ7_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA7; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED23; + __IO uint32_t HCDMAB7; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC8; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED24; + + union { + __IO uint32_t HCINT8; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT8_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN8; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN8_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ8; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ8_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA8; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED25; + __IO uint32_t HCDMAB8; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC9; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED26; + + union { + __IO uint32_t HCINT9; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT9_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN9; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN9_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ9; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ9_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA9; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED27; + __IO uint32_t HCDMAB9; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC10; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED28; + + union { + __IO uint32_t HCINT10; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT10_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN10; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN10_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ10; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ10_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA10; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED29; + __IO uint32_t HCDMAB10; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC11; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED30; + + union { + __IO uint32_t HCINT11; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT11_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN11; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN11_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ11; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ11_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA11; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED31; + __IO uint32_t HCDMAB11; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC12; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED32; + + union { + __IO uint32_t HCINT12; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT12_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN12; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN12_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ12; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ12_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA12; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED33; + __IO uint32_t HCDMAB12; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC13; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED34; + + union { + __IO uint32_t HCINT13; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT13_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN13; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN13_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ13; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ13_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA13; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED35; + __IO uint32_t HCDMAB13; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC14; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED36; + + union { + __IO uint32_t HCINT14; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT14_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN14; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN14_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ14; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ14_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA14; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED37; + __IO uint32_t HCDMAB14; /*!< Host Channel-n DMA Buffer Address Register */ + + union { + __IO uint32_t HCC15; /*!< Host Channel Characteristics Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t EP_DIR : 1; /*!< Indicates whether the transaction is IN or OUT. 0, OUT. 1, IN */ + uint32_t : 1; + __IO uint32_t LSD : 1; /*!< indicate that this channel is communicating to a low-speed device. */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 2; /*!< Multi Count (MC) / Error Count (EC). */ + __IO uint32_t DA : 7; /*!< This field selects the specific device serving as the data source + or sink. */ + __IO uint32_t OF : 1; /*!< The frame is odd or even. */ + __IO uint32_t CD : 1; /*!< sets this bit to stop transmitting/receiving data on a channel. */ + __IO uint32_t CE : 1; /*!< If the descriptor structure and data buffer are ready or not + yet. */ + } HCC15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED38; + + union { + __IO uint32_t HCINT15; /*!< Host Channel Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT15_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCINT_EN15; /*!< Host Channel Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data + source or sink. */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + uint32_t : 8; + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + __IO uint32_t ETE : 1; /*!< 3 consecutive transaction errors occurred on the USB bus */ + __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ + } HCINT_EN15_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCTSIZ15; /*!< Host Channel Transfer Size Register */ + + struct { + __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that + microframe.Bit N indicates scheduling for Nth microframe scheduling + for 8th microframe in that frame. */ + __IO uint32_t NTD : 8; /*!< Number of Transfer Descriptors. */ + uint32_t : 13; + __IO uint32_t PID : 2; /*!< the type of PID to use for the initial transaction */ + __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ + } HCTSIZ15_b; /*!< BitSize */ + }; + + union { + __IO uint32_t HCDMA15; /*!< Host Channel-n DMA Address Register */ + + struct { + uint32_t : 3; + __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ + __IO uint32_t ADDR : 23; /*!< he start address of 512 bytes page for Non-Isochronous */ + } HCDMA15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED39; + __IO uint32_t HCDMAB15; /*!< Host Channel-n DMA Buffer Address Register */ + __I uint32_t RESERVED40[64]; + + union { + __IO uint32_t DCFG; /*!< Device Configuration Register */ + + struct { + __IO uint32_t DSPEED : 2; /*!< the maximum speed the application can support */ + __IO uint32_t NZLSOH : 1; /*!< select the handshake the core sends on receiving a non zero-length + data packet during the OUT transaction of a control transfer's + Status stage */ + __IO uint32_t EN_32K_SUS : 1; /*!< Enable 32 KHz Suspend mode */ + __IO uint32_t DEVICE_ADDR: 7; /*!< The application must program this field after every SetAddress + control command */ + __IO uint32_t PFI : 2; /*!< Indicates the time within a (micro)frame at which the application + must be notified using the End Of Periodic Frame Interrupt */ + __IO uint32_t EDON : 1; /*!< If set the core sets NAK after Bulk OUT transfer complete */ + uint32_t : 9; + __IO uint32_t EN_SG_DMA : 1; /*!< enable the Scatter/Gather DMA operation */ + __IO uint32_t PSI : 2; /*!< Periodic Scheduling Interval */ + __IO uint32_t RVP : 6; /*!< It controls the resume period when the core resumes from suspend */ + } DCFG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DCTL; /*!< Device Control Register */ + + struct { + __IO uint32_t RWS : 1; /*!< If set, the core initiates remote signaling to wake the USB + hosts */ + __IO uint32_t SD : 1; /*!< If set, generates a device disconnect event to the USB host */ + __I uint32_t GNPINS : 1; /*!< A NAK handshake is sent out on all non-periodic IN endpoints, + irrespective of the data availability in the transmit FIFO. */ + __I uint32_t GONS : 1; /*!< No data is written to the RxFIFO, irrespective of space availability.. */ + __IO uint32_t TC : 3; /*!< Test Control */ + __O uint32_t SGNPIN : 1; /*!< A write to this field sets the Global Non-periodic IN NAK */ + __O uint32_t CGNPIN : 1; /*!< A write to this field clears the Global Non-periodic IN NAK */ + __O uint32_t SGON : 1; /*!< A write to this field sets the Global OUT NAK */ + __O uint32_t CGON : 1; /*!< A write to this field sets the Global OUT NAK. */ + __IO uint32_t POPD : 1; /*!< Power-On Programming Done */ + __IO uint32_t GMC : 2; /*!< GMC must be programmed only once after initialization. the number + of packets to be serviced for that end point before moving to + the next end point */ + uint32_t : 1; + __IO uint32_t IFNIE : 1; /*!< Ignore frame number for isochronous endpoints */ + __IO uint32_t NBE : 1; /*!< Set NAK automatically on babble */ + __IO uint32_t ECBNA : 1; /*!< After receiving BNA interrupt, the core disables the endpoint */ + } DCTL_b; /*!< BitSize */ + }; + + union { + __I uint32_t DSTS; /*!< Device Status Register */ + + struct { + __I uint32_t SUSPEND : 1; /*!< this bit is set as long as a Suspend condition is detected on + the USB */ + __I uint32_t SPEED : 2; /*!< Indicates the speed at which the DWC_otg core has come up after + speed detection through a chirp sequence */ + __I uint32_t EE : 1; /*!< reason of suspend state */ + uint32_t : 4; + __I uint32_t SOFFN : 14; /*!< Frame or Microframe Number of the Received SOF */ + __I uint32_t DLSDP : 1; /*!< Logic level of D+ */ + __I uint32_t DLSDN : 1; /*!< Logic level of D- */ + } DSTS_b; /*!< BitSize */ + }; + __I uint32_t RESERVED41; + + union { + __IO uint32_t DIEPEN; /*!< Device IN Endpoint Common Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */ + __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< AHB Error Interrupt */ + __IO uint32_t TIMEOUT : 1; /*!< Timeout Condition(Non-isochronous endpoints) */ + __IO uint32_t ITRWTFE : 1; /*!< IN Token Received When TxFIFO Empty */ + __IO uint32_t ITRWEPM : 1; /*!< IN Token received with EP Mismatch */ + __IO uint32_t IENE : 1; /*!< IN Endpoint NAK Effective */ + uint32_t : 1; + __IO uint32_t FU : 1; /*!< Fifo Underrun */ + __IO uint32_t BNA : 1; /*!< BNA Interrupt */ + uint32_t : 3; + __IO uint32_t NAK : 1; /*!< NAK interrupt */ + } DIEPEN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DOEPEN; /*!< Device OUT Endpoint Common Interrupt Enable Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */ + __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< AHB Error Interrupt */ + __IO uint32_t SPD : 1; /*!< SETUP Phase Done, Applies to control endpoints only */ + __IO uint32_t OTRWED : 1; /*!< OUT Token Received when Endpoint Disabled, Applies to control + OUT endpoints only */ + __IO uint32_t SPR : 1; /*!< Status Phase Received */ + __IO uint32_t BTBSPR : 1; /*!< Back-to-Back SETUP Packets Received, Applies to control OUT + endpoints only */ + uint32_t : 1; + __IO uint32_t OPE : 1; /*!< OUT Packet Error */ + __IO uint32_t BNA : 1; /*!< BNA Interrupt */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error interrupt */ + __IO uint32_t NAK : 1; /*!< NAK interrupt */ + __IO uint32_t NYET : 1; /*!< NYET interrupt */ + } DOEPEN_b; /*!< BitSize */ + }; + + union { + __I uint32_t DAINT; /*!< Device All Channels Interrupt Register */ + + struct { + __I uint32_t INT : 16; /*!< IN Endpoint Interrupt Bits, from 0 to 15. */ + __I uint32_t OUT_INT : 16; /*!< OUT Endpoint Interrupt Bits, from 0 to 15. */ + } DAINT_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DAINT_EN; /*!< Device All Channels Interrupt Enable Register */ + + struct { + __IO uint32_t IN_EN : 16; /*!< IN EP Interrupt Enable, from 0 to 15. */ + __IO uint32_t OUT_EN : 16; /*!< OUT EP Interrupt Enable, from 0 to 15. */ + } DAINT_EN_b; /*!< BitSize */ + }; + __I uint32_t RESERVED42[4]; + + union { + __IO uint32_t DTHRCTL; /*!< Device Threshold Control Register */ + + struct { + __IO uint32_t NISOINETE : 1; /*!< Non-ISO IN Endpoints Threshold Enable */ + __IO uint32_t ISOINETE : 1; /*!< ISO IN Endpoints Threshold Enable */ + __IO uint32_t TTL : 9; /*!< This field specifies Transmit thresholding size in DWORDS */ + __IO uint32_t ATR : 2; /*!< These bits define the ratio between the AHB threshold and the + MAC threshold for the transmit path only. */ + uint32_t : 3; + __IO uint32_t RTE : 1; /*!< If set, the core enables thresholding in the receive direction */ + __IO uint32_t RTL : 9; /*!< This field specifies Receive thresholding size in DWORDS */ + uint32_t : 1; + __IO uint32_t APE : 1; /*!< This bit controls internal DMA arbiter parking for IN endpoints */ + } DTHRCTL_b; /*!< BitSize */ + }; + __IO uint16_t DIEPEMPEN; /*!< Device IN Endpoint FIFO Empty Interrupt Enable Register */ + __I uint16_t RESERVED43[101]; + + union { + __IO uint32_t DIEPCTL0; /*!< Device Control IN Endpoint 0 Control Register */ + + struct { + __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint, + applies to IN and OUT endpoints */ + uint32_t : 13; + __I uint32_t USBAE : 1; /*!< Always 1, indicating that control endpoint 0 is always active + in all configurations and interfaces */ + uint32_t : 1; + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint */ + __I uint32_t EP_TYPE : 2; /*!< Hardcoded to 00 for control */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< The application sets this bit, and the core clears it when a + SETUP token is received for this endpoint */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + uint32_t : 2; + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED44; + + union { + __IO uint32_t DIEPINT0; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED45; + + union { + __IO uint32_t DIEPTSIZ0; /*!< Device IN Endpoint 0 Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */ + uint32_t : 12; + __IO uint32_t PACKET_CNT : 2; /*!< the total number of USB packets */ + } DIEPTSIZ0_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA0; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA0; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED46; + __I uint32_t DIEPDMAB0; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL1; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED47; + + union { + __IO uint32_t DIEPINT1; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED48; + + union { + __IO uint32_t DIEPTSIZ1; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ1_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA1; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA1; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED49; + __I uint32_t DIEPDMAB1; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL2; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED50; + + union { + __IO uint32_t DIEPINT2; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED51; + + union { + __IO uint32_t DIEPTSIZ2; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ2_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA2; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA2; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED52; + __I uint32_t DIEPDMAB2; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL3; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED53; + + union { + __IO uint32_t DIEPINT3; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED54; + + union { + __IO uint32_t DIEPTSIZ3; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ3_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA3; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA3; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED55; + __I uint32_t DIEPDMAB3; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL4; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED56; + + union { + __IO uint32_t DIEPINT4; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED57; + + union { + __IO uint32_t DIEPTSIZ4; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ4_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA4; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA4; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED58; + __I uint32_t DIEPDMAB4; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL5; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED59; + + union { + __IO uint32_t DIEPINT5; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED60; + + union { + __IO uint32_t DIEPTSIZ5; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ5_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA5; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA5; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED61; + __I uint32_t DIEPDMAB5; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL6; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED62; + + union { + __IO uint32_t DIEPINT6; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED63; + + union { + __IO uint32_t DIEPTSIZ6; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ6_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA6; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA6; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED64; + __I uint32_t DIEPDMAB6; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL7; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED65; + + union { + __IO uint32_t DIEPINT7; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED66; + + union { + __IO uint32_t DIEPTSIZ7; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ7_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA7; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA7; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED67; + __I uint32_t DIEPDMAB7; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL8; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED68; + + union { + __IO uint32_t DIEPINT8; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED69; + + union { + __IO uint32_t DIEPTSIZ8; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ8_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA8; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA8; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED70; + __I uint32_t DIEPDMAB8; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL9; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED71; + + union { + __IO uint32_t DIEPINT9; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED72; + + union { + __IO uint32_t DIEPTSIZ9; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ9_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA9; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA9; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED73; + __I uint32_t DIEPDMAB9; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL10; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED74; + + union { + __IO uint32_t DIEPINT10; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED75; + + union { + __IO uint32_t DIEPTSIZ10; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ10_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA10; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA10; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED76; + __I uint32_t DIEPDMAB10; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL11; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED77; + + union { + __IO uint32_t DIEPINT11; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED78; + + union { + __IO uint32_t DIEPTSIZ11; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ11_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA11; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA11; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED79; + __I uint32_t DIEPDMAB11; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL12; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED80; + + union { + __IO uint32_t DIEPINT12; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED81; + + union { + __IO uint32_t DIEPTSIZ12; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ12_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA12; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA12; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED82; + __I uint32_t DIEPDMAB12; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL13; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED83; + + union { + __IO uint32_t DIEPINT13; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED84; + + union { + __IO uint32_t DIEPTSIZ13; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ13_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA13; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA13; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED85; + __I uint32_t DIEPDMAB13; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL14; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED86; + + union { + __IO uint32_t DIEPINT14; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED87; + + union { + __IO uint32_t DIEPTSIZ14; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ14_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA14; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA14; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED88; + __I uint32_t DIEPDMAB14; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DIEPCTL15; /*!< Device IN Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + uint32_t : 1; + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous IN endpoints, stall all tokens. + To control endpoints, response an ACK */ + __IO uint32_t TX_FIFO_NUM: 4; /*!< TxFIFO Number */ + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop transmitting data on an + endpoint even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + transmit is setup */ + } DIEPCTL15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED89; + + union { + __IO uint32_t DIEPINT15; /*!< Device IN Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t TIMEOUT : 1; /*!< a timeout condition on the USB for the last IN token on this + endpoint */ + __IO uint32_t INTRWTFE : 1; /*!< IN Token Received When TxFIFO is Empty */ + __IO uint32_t INTRWEPM : 1; /*!< IN Token Received with EP Mismatch */ + __IO uint32_t INEPNE : 1; /*!< IN Endpoint NAK Effective */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t TFU : 1; /*!< Transmit FIFO Underrun */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DIEPINT15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED90; + + union { + __IO uint32_t DIEPTSIZ15; /*!< Device IN Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t MC : 2; /*!< the number of packets per microframe to periodic IN endpoints. + The number of packets must be fetched per non-periodic IN endpoints */ + } DIEPTSIZ15_b; /*!< BitSize */ + }; + __IO uint32_t DIEPDMA15; /*!< Device IN Endpoint-n DMA Address Register */ + __IO uint16_t DTXFSA15; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ + __I uint16_t RESERVED91; + __I uint32_t DIEPDMAB15; /*!< Device IN Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL0; /*!< Device Control OUT Endpoint 0 Control Register */ + + struct { + __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint, + applies to IN and OUT endpoints */ + uint32_t : 13; + __I uint32_t USBAE : 1; /*!< Always 1, indicating that control endpoint 0 is always active + in all configurations and interfaces */ + uint32_t : 1; + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint */ + __I uint32_t EP_TYPE : 2; /*!< Hardcoded to 00 for control */ + __IO uint32_t SNOOP : 1; /*!< does not check if the OUT packets are correct before transferring */ + __IO uint32_t STALL : 1; /*!< The application sets this bit, and the core clears it when a + SETUP token is received for this endpoint */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + uint32_t : 2; + __I uint32_t EPD : 1; /*!< The application cannot disable control OUT endpoint 0 */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED92; + + union { + __IO uint32_t DOEPINT0; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT0_b; /*!< BitSize */ + }; + __I uint32_t RESERVED93; + + union { + __IO uint32_t DOEPTSIZ0; /*!< Device OUT Endpoint 0 Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */ + uint32_t : 12; + __IO uint32_t PACKET_CNT : 1; /*!< This field is decremented to zero after a packet is written + into the RxFIFO */ + uint32_t : 9; + __IO uint32_t SETUP_CNT : 2; /*!< the number of back-to-back SETUP data packets the endpoint can + receive */ + } DOEPTSIZ0_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA0; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED94; + __I uint32_t DOEPDMAB0; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL1; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED95; + + union { + __IO uint32_t DOEPINT1; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT1_b; /*!< BitSize */ + }; + __I uint32_t RESERVED96; + + union { + __IO uint32_t DOEPTSIZ1; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ1_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA1; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED97; + __I uint32_t DOEPDMAB1; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL2; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED98; + + union { + __IO uint32_t DOEPINT2; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT2_b; /*!< BitSize */ + }; + __I uint32_t RESERVED99; + + union { + __IO uint32_t DOEPTSIZ2; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ2_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA2; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED100; + __I uint32_t DOEPDMAB2; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL3; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED101; + + union { + __IO uint32_t DOEPINT3; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT3_b; /*!< BitSize */ + }; + __I uint32_t RESERVED102; + + union { + __IO uint32_t DOEPTSIZ3; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ3_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA3; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED103; + __I uint32_t DOEPDMAB3; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL4; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED104; + + union { + __IO uint32_t DOEPINT4; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT4_b; /*!< BitSize */ + }; + __I uint32_t RESERVED105; + + union { + __IO uint32_t DOEPTSIZ4; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ4_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA4; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED106; + __I uint32_t DOEPDMAB4; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL5; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED107; + + union { + __IO uint32_t DOEPINT5; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT5_b; /*!< BitSize */ + }; + __I uint32_t RESERVED108; + + union { + __IO uint32_t DOEPTSIZ5; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ5_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA5; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED109; + __I uint32_t DOEPDMAB5; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL6; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED110; + + union { + __IO uint32_t DOEPINT6; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT6_b; /*!< BitSize */ + }; + __I uint32_t RESERVED111; + + union { + __IO uint32_t DOEPTSIZ6; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ6_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA6; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED112; + __I uint32_t DOEPDMAB6; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL7; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED113; + + union { + __IO uint32_t DOEPINT7; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT7_b; /*!< BitSize */ + }; + __I uint32_t RESERVED114; + + union { + __IO uint32_t DOEPTSIZ7; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ7_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA7; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED115; + __I uint32_t DOEPDMAB7; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL8; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED116; + + union { + __IO uint32_t DOEPINT8; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT8_b; /*!< BitSize */ + }; + __I uint32_t RESERVED117; + + union { + __IO uint32_t DOEPTSIZ8; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ8_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA8; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED118; + __I uint32_t DOEPDMAB8; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL9; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED119; + + union { + __IO uint32_t DOEPINT9; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT9_b; /*!< BitSize */ + }; + __I uint32_t RESERVED120; + + union { + __IO uint32_t DOEPTSIZ9; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ9_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA9; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED121; + __I uint32_t DOEPDMAB9; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL10; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED122; + + union { + __IO uint32_t DOEPINT10; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT10_b; /*!< BitSize */ + }; + __I uint32_t RESERVED123; + + union { + __IO uint32_t DOEPTSIZ10; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ10_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA10; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED124; + __I uint32_t DOEPDMAB10; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL11; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED125; + + union { + __IO uint32_t DOEPINT11; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT11_b; /*!< BitSize */ + }; + __I uint32_t RESERVED126; + + union { + __IO uint32_t DOEPTSIZ11; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ11_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA11; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED127; + __I uint32_t DOEPDMAB11; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL12; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED128; + + union { + __IO uint32_t DOEPINT12; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT12_b; /*!< BitSize */ + }; + __I uint32_t RESERVED129; + + union { + __IO uint32_t DOEPTSIZ12; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ12_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA12; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED130; + __I uint32_t DOEPDMAB12; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL13; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED131; + + union { + __IO uint32_t DOEPINT13; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT13_b; /*!< BitSize */ + }; + __I uint32_t RESERVED132; + + union { + __IO uint32_t DOEPTSIZ13; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ13_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA13; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED133; + __I uint32_t DOEPDMAB13; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL14; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED134; + + union { + __IO uint32_t DOEPINT14; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT14_b; /*!< BitSize */ + }; + __I uint32_t RESERVED135; + + union { + __IO uint32_t DOEPTSIZ14; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ14_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA14; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED136; + __I uint32_t DOEPDMAB14; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ + + union { + __IO uint32_t DOEPCTL15; /*!< Device OUT Endpoint N Control Register */ + + struct { + __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ + uint32_t : 4; + __IO uint32_t UAE : 1; /*!< Indicates whether this endpoint is active */ + __I uint32_t DPID : 1; /*!< Endpoint Data PID */ + __I uint32_t NAK : 1; /*!< The core is transmitting NAK handshakes on this endpoint if + set */ + __IO uint32_t EP_TYPE : 2; /*!< Indicates the transfer type selected. */ + __IO uint32_t EC : 1; /*!< Doesn't check the correctness of OUT packets before transferring */ + __IO uint32_t STALL : 1; /*!< To non-control, non-isochronous OUT endpoints, stall all tokens. + To control endpoints, response an ACK */ + uint32_t : 4; + __O uint32_t CNAK : 1; /*!< A write to this bit clears the NAK bit for the endpoint */ + __O uint32_t SNAK : 1; /*!< A write to this bit sets the NAK bit for the endpoint */ + __O uint32_t SET_D0_PID : 1; /*!< Set DATA0 PID */ + __O uint32_t SET_D1_PID : 1; /*!< Set DATA1 PID */ + __IO uint32_t EPD : 1; /*!< The application sets this bit to stop receiving data on an endpoint + even before the transfer for that endpoint is complete */ + __IO uint32_t EPE : 1; /*!< the descriptor structure and data buffer with data ready to + receive data is setup */ + } DOEPCTL15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED137; + + union { + __IO uint32_t DOEPINT15; /*!< Device OUT Endpoint-n Interrupt Register */ + + struct { + __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ + __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ + __IO uint32_t AHB_ERR : 1; /*!< there is an AHB error during AHB read/write */ + __IO uint32_t SETUP : 1; /*!< Only for Control OUT endpoints, the SETUP phase for the control + endpoint is complete */ + __IO uint32_t OUTTRWEPD : 1; /*!< OUT Token Received When Endpoint Disabled */ + __IO uint32_t SPRFCW : 1; /*!< Only for Control OUT endpoints, the host has switched from data + phase to the status phase of a Control Write transfer */ + __IO uint32_t B2BSETUPPR : 1; /*!< to Control OUT endpoints only, received more than three back-to-back + SETUP packets for this particular endpoint */ + __I uint32_t TFE : 1; /*!< either half or completely empty depending on GAHBCFG.NPTxFEmpLvl */ + __IO uint32_t OUTPE : 1; /*!< an overflow or a CRC error for an OUT packet */ + __IO uint32_t BNA : 1; /*!< Buffer Not Available */ + uint32_t : 2; + __IO uint32_t BE : 1; /*!< Babble Error */ + __IO uint32_t NAK : 1; /*!< a NAK is transmitted */ + __IO uint32_t NYET : 1; /*!< a NYET response is transmitted */ + } DOEPINT15_b; /*!< BitSize */ + }; + __I uint32_t RESERVED138; + + union { + __IO uint32_t DOEPTSIZ15; /*!< Device OUT Endpoint-n Transfer Size Register */ + + struct { + __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ + __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ + __IO uint32_t SETUPCNT_PID: 2; /*!< To control OUT Endpoints only, back-to-back SETUP data packets. + To isochronous OUT endpoints, data PID received in the last + packet */ + } DOEPTSIZ15_b; /*!< BitSize */ + }; + __IO uint32_t DOEPDMA15; /*!< Device OUT Endpoint-n DMA Address Register */ + __I uint32_t RESERVED139; + __I uint32_t DOEPDMAB15; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ +} USB_Type; + + +/* ================================================================================ */ +/* ================ GLOBAL_CTRL ================ */ +/* ================================================================================ */ + + +/** + * @brief GLOBAL_CTRL (GLOBAL_CTRL) + */ + +typedef struct { /*!< GLOBAL_CTRL Structure */ + + union { + __I uint32_t AES_STATUS; /*!< AES status */ + + struct { + __I uint32_t RD_ALMOST_EMPTY: 1; /*!< FIFO read almost empty */ + __I uint32_t RD_EMPTY : 1; /*!< FIFO read empty */ + __I uint32_t WR_FULL_ALMOST: 1; /*!< FIFO write almost full */ + __I uint32_t WR_FULL : 1; /*!< FIFO write full */ + __I uint32_t IDLE : 1; /*!< decryption finish */ + } AES_STATUS_b; /*!< BitSize */ + }; + __I uint32_t RESERVED0[253]; + + union { + __IO uint32_t CLK_SEL_0; /*!< clock select 0 */ + + struct { + __IO uint32_t CAN1_CLK : 2; /*!< CAN1 clock frequency dividor based on system clock, which should + be 1/32, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t CAN0_CLK : 2; /*!< CAN0 clock frequency dividor based on system clock, which should + be 1/32, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t I2C1_CLK : 2; /*!< I2C1 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t I2C0_CLK : 2; /*!< I2C0 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t SPI1_CLK : 2; /*!< SPI1 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t SPI0_CLK : 2; /*!< SPI0 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t UART1_CLK : 2; /*!< UART1 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t UART0_CLK : 2; /*!< UART0 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t RTC_CLK : 2; /*!< RTC clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t GPIO_CLK : 2; /*!< GPIO clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t TIMER_CLK : 2; /*!< TIMER clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t WDG_CLK : 2; /*!< watchdog clock frequency dividor based on system clock, which + should be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + uint32_t : 2; + __IO uint32_t FLASH_CLK : 2; /*!< FLASH clock frequency dividor based on system clock, which should + be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ + __IO uint32_t DMA_AHB_CLK: 2; /*!< DMA AHB bus clock frequency dividor based on system clock, which + should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ + __IO uint32_t USB_AHB_CLK: 2; /*!< USB AHB bus clock frequency dividor based on system clock, which + should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ + } CLK_SEL_0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CLK_SEL_1; /*!< clock select 1 */ + + struct { + __IO uint32_t ETH_AHB_CLK: 2; /*!< ETH_AHB clock frequency dividor based on system clock, which + should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ + __IO uint32_t DDR_CLK : 2; /*!< DDR clock frequency dividor based on system clock, which should + be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ + uint32_t : 4; + __IO uint32_t ADC_CLK : 2; /*!< ADC clock frequency dividor based on system clock, which should + be 1/8, 1/16, 1/32, external from 0 to 3 */ + __IO uint32_t EFUSE_CLK : 2; /*!< EFUSE clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t SYS_CLK : 4; /*!< system clock clock frequency dividor based on system clock, + which should be oscillator(0), DLL(1), crystal(2), external(3), + JTAG(4), PS(8) */ + __IO uint32_t UART2_CLK : 2; /*!< UART2 clock frequency dividor based on system clock, which should + be 1/2, 1/4, 1/8, 1/16 from 0 to 3 */ + __IO uint32_t UTMI_CLK : 1; /*!< UTMI clock came from on-chip usb phy(0) or off-chip usb phy(1) */ + } CLK_SEL_1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t USB_PHY_CTRL; /*!< USB Phy Control Register */ + + struct { + __IO uint32_t BITSTUFF : 1; /*!< 0: No bit stuff */ + __IO uint32_t XTLSEL : 1; /*!< 0: 12MHz */ + __IO uint32_t PLL : 1; /*!< PLL mode */ + __IO uint32_t VOLDET : 1; /*!< Voltage Detector Enable, 0: Disable */ + __IO uint32_t IDUP : 1; /*!< 0: ID is uplled up through 33k Ohm resister */ + __IO uint32_t CKISEL : 1; /*!< Clock selection, 0: Crystal, 1: Internal Clock */ + __IO uint32_t FMOD : 1; /*!< 1: Normal */ + __IO uint32_t SQUELCH : 3; /*!< Squelch Reference Voltage, 000: 27.5mV, 001: 137.5mV, 111: 220mV */ + __IO uint32_t HDISCDT : 3; /*!< Host Disconnect Detection Reference Voltage, 000: 500mV, 100: + 588mV, 111: 654mV */ + __IO uint32_t PRTSEL : 1; /*!< 0: Internal OTG PHY, 1: UTMI to External PHY */ + __IO uint32_t RSTPRT : 1; /*!< 0: The reverse of usb_rst_n will reset, 1: Reset OTG PHY */ + } USB_PHY_CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RTC_INT_EN; /*!< RTC interrupt enable Register */ + + struct { + __IO uint32_t SECOND : 1; /*!< 1s interrupt enable */ + __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt enable */ + } RTC_INT_EN_b; /*!< BitSize */ + }; + __I uint32_t RESERVED1; + + union { + __IO uint32_t NMI_SEL; /*!< nmi interrupt selection */ + + struct { + __IO uint32_t NMI : 7; /*!< NMI interrupt ID */ + } NMI_SEL_b; /*!< BitSize */ + }; + __I uint32_t RESERVED2; + __IO uint32_t AES_TARGET_ADDR; /*!< AES target address, default is frame decoder address(0x41800000) */ + + union { + __IO uint32_t AES_BURST_TYPE; /*!< AES burst type */ + + struct { + __IO uint32_t TYPE : 2; /*!< burst type, fixed(0), incr(1) */ + } AES_BURST_TYPE_b; /*!< BitSize */ + }; + __I uint32_t RESERVED3[3]; + + union { + __IO uint32_t ICACHE; /*!< ICACHE Enable */ + + struct { + __IO uint32_t EN : 1; /*!< ICACHE Enable */ + } ICACHE_b; /*!< BitSize */ + }; + __IO uint32_t IBUSOFF; /*!< Code Bus Offset */ + __IO uint32_t DBUSOFF; /*!< Data Bus Offset */ + __IO uint32_t EXTADDR; /*!< Bus Ext Addr */ +} GLOBAL_CTRL_Type; + + +/* ================================================================================ */ +/* ================ AES ================ */ +/* ================================================================================ */ + + +/** + * @brief AES (AES) + */ + +typedef struct { /*!< AES Structure */ + __IO uint32_t FIFO; /*!< data FIFO to be decoded */ + + union { + __O uint32_t FIFO_CLEAR; /*!< clear data FIFO */ + + struct { + __O uint32_t CLEAR : 1; /*!< clear after write 1 and write 0 */ + } FIFO_CLEAR_b; /*!< BitSize */ + }; +} AES_Type; + + +/* ================================================================================ */ +/* ================ DDRC ================ */ +/* ================================================================================ */ + + +/** + * @brief DDR_CFG (DDRC) + */ + +typedef struct { /*!< DDRC Structure */ + __IO uint32_t CMD; /*!< DDR commands to program */ + + union { + __IO uint32_t CTRL; /*!< DDR Control */ + + struct { + __IO uint32_t TO : 1; /*!< Take over DDRC siggen */ + __IO uint32_t CLR : 1; /*!< Clear commands in FIFO */ + __O uint32_t STR : 1; /*!< Start to execute the commands in FIFO */ + } CTRL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t MODE; /*!< DDR mode */ + + struct { + __IO uint32_t MODE : 6; /*!< DDRC Mode */ + uint32_t : 2; + __IO uint32_t LANE : 1; /*!< LANE synchronization logic bypass */ + uint32_t : 3; + __IO uint32_t ADEC : 1; /*!< address decoder mapping */ + uint32_t : 3; + __IO uint32_t B16 : 2; /*!< Active 16 bit DQ position when the unmber of DQ IO is 16 */ + uint32_t : 6; + __IO uint32_t CLKPOL : 2; /*!< DQS clkpol set by user on the PHY */ + } MODE_b; /*!< BitSize */ + }; + + union { + __IO uint32_t QUE; /*!< DDRC queue depth */ + + struct { + __IO uint32_t DEPTH : 1; /*!< DDRC queue depth */ + } QUE_b; /*!< BitSize */ + }; + + union { + __IO uint32_t REF; /*!< Refresh control */ + + struct { + __IO uint32_t THRD : 5; /*!< Number of refresh requests which can be postponed */ + uint32_t : 3; + __IO uint32_t TRIG : 4; /*!< Number of refresh requests every dl_refi */ + uint32_t : 4; + __IO uint32_t TIME : 16; /*!< Refresh interval time */ + } REF_b; /*!< BitSize */ + }; + + union { + __O uint32_t REF_TRIG; /*!< Refresh trigger */ + + struct { + __O uint32_t GO : 1; /*!< Write 1 to trigger one refresh request by cbus */ + } REF_TRIG_b; /*!< BitSize */ + }; + + union { + __O uint32_t ZQ_TRIG; /*!< ZQCTL trigger */ + + struct { + __O uint32_t CS : 1; /*!< Write 1 to trigger one ZQCS request by cbus */ + __O uint32_t CL : 1; /*!< Write 1 to trigger one ZQCL request by cbus */ + } ZQ_TRIG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ZQCSR; /*!< ZQCSR */ + + struct { + __IO uint32_t EN : 1; /*!< Enable ZQCS request */ + __IO uint32_t PRI : 1; /*!< 0: DMA access prior to ZQCS, 1: ZQCS prior to DMA access */ + } ZQCSR_b; /*!< BitSize */ + }; + __IO uint32_t ZQCSI; /*!< ZQCS interval time */ + + union { + __IO uint32_t RCD; /*!< t(RCD) */ + + struct { + __IO uint32_t DI : 5; /*!< t(RCD), delay from ACT command to RW command of same bank */ + } RCD_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RAS; /*!< t(RAS) */ + + struct { + __IO uint32_t DI : 6; /*!< t(RAS), delay from ACT command to PRE command of same bank */ + } RAS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RP; /*!< t(RP) */ + + struct { + __IO uint32_t DI : 5; /*!< t(RP), delay from PRE command to ACT/REF/ZQ command */ + uint32_t : 3; + __IO uint32_t RPA : 1; /*!< 0: t(RP) delay for PREA command; 1: t(RP)+1 delay for PREA command */ + } RP_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RC; /*!< t(RC) */ + + struct { + __IO uint32_t DI : 7; /*!< t(RC), delay from ACT command to ACT command of same bank */ + } RC_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RRD; /*!< t(RRD) */ + + struct { + __IO uint32_t DI : 4; /*!< t(RRD), delay from ACT command to ACT command */ + } RRD_b; /*!< BitSize */ + }; + + union { + __IO uint32_t CCD; /*!< t(CCD) */ + + struct { + __IO uint32_t DI : 3; /*!< t(CCD), delay from RW command to RW command */ + } CCD_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RTW; /*!< t(RTW) */ + + struct { + __IO uint32_t DI : 5; /*!< t(RTW), delay from RD command to WR command */ + } RTW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t WTR; /*!< t(WTR) */ + + struct { + __IO uint32_t DI : 5; /*!< t(WTR), delay from WR command to RD command */ + } WTR_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RTP; /*!< t(RTP) */ + + struct { + __IO uint32_t DI : 3; /*!< t(RTP), delay from RD command to PRE command of same bank */ + } RTP_b; /*!< BitSize */ + }; + + union { + __IO uint32_t WTP; /*!< t(WTP) */ + + struct { + __IO uint32_t DI : 6; /*!< t(WTP), delay from WR command to PRE command of same bank */ + } WTP_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RFC; /*!< t(RFC) */ + + struct { + __IO uint32_t DI : 8; /*!< t(WTP), delay from WR command to PRE command of same bank */ + } RFC_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ZQCL; /*!< t(ZQoper) */ + + struct { + __IO uint32_t DI : 9; /*!< t(ZQoper), delay from ZQCL command to REF/ZQ/ACT command */ + } ZQCL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ZQCS; /*!< t(ZQCS) */ + + struct { + __IO uint32_t DI : 7; /*!< t(ZQCS), delay from ZQCS command to REF/ZQ/ACT command */ + } ZQCS_b; /*!< BitSize */ + }; + + union { + __IO uint32_t FAW; /*!< t(FAW) */ + + struct { + __IO uint32_t DI : 6; /*!< t(FAW), 4 act command window time */ + } FAW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t BURST; /*!< BURST */ + + struct { + __IO uint32_t LEN : 1; /*!< 0: length 8, 1: length 4 */ + } BURST_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PHUNG; /*!< PHUNG */ + + struct { + __IO uint32_t MODE : 1; /*!< 0: normal mode, 1: prevent read hang mode */ + __IO uint32_t LPM : 1; /*!< 1: stop the IO clk */ + } PHUNG_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RL; /*!< READ Latency */ + + struct { + __IO uint32_t VAL : 5; /*!< READ Latency */ + } RL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t WL; /*!< WRITE Latency */ + + struct { + __IO uint32_t VAL : 5; /*!< WRITE Latency */ + } WL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TRAIN; /*!< TRAIN */ + + struct { + __IO uint32_t EN : 4; /*!< Enable lane N training mode */ + } TRAIN_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DQSEN0; /*!< Delay cycles of dqsen of byte lane 0 */ + + struct { + __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 0 */ + } DQSEN0_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DQSEN1; /*!< Delay cycles of dqsen of byte lane 1 */ + + struct { + __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 1 */ + } DQSEN1_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DQSEN2; /*!< Delay cycles of dqsen of byte lane 2 */ + + struct { + __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 2 */ + } DQSEN2_b; /*!< BitSize */ + }; + + union { + __IO uint32_t DQSEN3; /*!< Delay cycles of dqsen of byte lane 0 */ + + struct { + __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 3 */ + } DQSEN3_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ODTH; /*!< Delay from WR command to odt high transition */ + + struct { + __IO uint32_t DL : 5; /*!< Delay from WR command to odt high transition */ + } ODTH_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ODTL; /*!< Delay from WR command to odt low transition */ + + struct { + __IO uint32_t DL : 5; /*!< Delay from WR command to odt low transition */ + } ODTL_b; /*!< BitSize */ + }; + + union { + __O uint32_t ODT; /*!< Used in write leveling mode */ + + struct { + __O uint32_t TRIG : 1; /*!< 0: trigger odt low, 1: trigger odt high */ + } ODT_b; /*!< BitSize */ + }; + + union { + __O uint32_t DQS; /*!< Used in write leveling mode */ + + struct { + __O uint32_t TRIG : 1; /*!< Writing 1 to this register triggers a dqs pulse */ + } DQS_b; /*!< BitSize */ + }; + + union { + __I uint32_t STA; /*!< Commands FIFO */ + + struct { + __I uint32_t MODE : 1; /*!< DDRC in sw_proc mode */ + __I uint32_t EMPTY : 1; /*!< Sw_proc command fifo empty */ + __I uint32_t FULL : 1; /*!< Sw_proc command fifo full */ + } STA_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INTCTL; /*!< Interrupt Control */ + + struct { + __IO uint32_t DONE : 1; /*!< 0: the sw_proc_done int will not be masked, 1: the sw_proc_done + int will be masked */ + __IO uint32_t ERR : 1; /*!< mask of the lane_sync_error interrupt */ + uint32_t : 14; + __IO uint32_t MODE : 1; /*!< Interrupt mode: 0: int level active, write 1 to clear; 1: int + edge active */ + } INTCTL_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INTRAW; /*!< Interrupt RAW */ + + struct { + __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done before mask */ + __IO uint32_t ERR : 1; /*!< int reg of the lane sync error before masked */ + } INTRAW_b; /*!< BitSize */ + }; + + union { + __IO uint32_t INTSTA; /*!< Interrupt STA */ + + struct { + __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done after mask */ + __IO uint32_t ERR : 1; /*!< int register of lane sync error after masked */ + } INTSTA_b; /*!< BitSize */ + }; + + union { + __IO uint32_t PHY; /*!< PHY */ + + struct { + __IO uint32_t RST : 1; /*!< FPGA version, reset read dq fifo. Low active */ + } PHY_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RDQ; /*!< FPGA version, read dq delay of byte lane N */ + + struct { + __IO uint32_t L3 : 6; /*!< FPGA version, read dq delay of byte lane3 */ + uint32_t : 2; + __IO uint32_t L2 : 6; /*!< FPGA version, read dq delay of byte lane2 */ + uint32_t : 2; + __IO uint32_t L1 : 6; /*!< FPGA version, read dq delay of byte lane3 */ + uint32_t : 2; + __IO uint32_t L0 : 7; /*!< FPGA version, read dq delay of byte lane0 */ + } RDQ_b; /*!< BitSize */ + }; + + union { + __I uint32_t CALIB; /*!< calibration */ + + struct { + __I uint32_t TPU : 8; /*!< calibration result values, if fail then 0x40 */ + __I uint32_t TPD : 8; /*!< calibration result values, if fail then 0x40 */ + __I uint32_t PDR : 5; /*!< calibration result values, if fail then 0x40 */ + __I uint32_t NDR : 5; /*!< calibration result values, if fail then 0x40 */ + uint32_t : 5; + __IO uint32_t EN : 1; /*!< trigger the calibration processing which is sensitive to the + positive edge */ + } CALIB_b; /*!< BitSize */ + }; + + union { + __IO uint32_t ITMDLY; /*!< "itmdly" is the fine delay trim to the read path "dq", "itmsdly" + is to the read path of "dqs". From 000 to 111 increasingly, + each step is about 40ps */ + + struct { + __IO uint32_t I0 : 4; /*!< itmdly0 */ + __IO uint32_t IS0 : 4; /*!< itmsdly0 */ + __IO uint32_t I1 : 4; /*!< itmdly1 */ + __IO uint32_t IS1 : 4; /*!< itmsdly1 */ + __IO uint32_t I2 : 4; /*!< itmdly2 */ + __IO uint32_t IS2 : 4; /*!< itmsdly2 */ + __IO uint32_t I3 : 4; /*!< itmdly3 */ + __IO uint32_t IS3 : 4; /*!< itmsdly3 */ + } ITMDLY_b; /*!< BitSize */ + }; + + union { + __IO uint32_t TUNE; /*!< CALIB_TUNE */ + + struct { + __IO uint32_t TPU : 4; /*!< tpu_tune, finial val = tune[3] ? val - tune : val + tune */ + __IO uint32_t TPD : 4; /*!< tpd_tune, tune[3:0] for TPD/TPU, [2:0] is the tune val */ + __IO uint32_t PDR : 4; /*!< pdr_tune, inial val = tune[2] ? val - tune : val + tune */ + __IO uint32_t NDR : 4; /*!< ndr_tune, tune[2:0] for NDR/PDR, [1:0] is the tune val */ + } TUNE_b; /*!< BitSize */ + }; + + union { + __IO uint32_t RD_SEL; /*!< RD_WINDOWS_SEL */ + + struct { + __IO uint32_t PHY_SEL : 3; /*!< To fix the phy read valid issue, this is to adjust the read + data valid window to match the phy read valid by cycle level */ + } RD_SEL_b; /*!< BitSize */ + }; +} DDRC_Type; + + +/* ================================================================================ */ +/* ================ PDLOCK ================ */ +/* ================================================================================ */ + + +/** + * @brief PLL DLL LOCK (PDLOCK) + */ + +typedef struct { /*!< PDLOCK Structure */ + + union { + __I uint32_t GCLK; /*!< GCLK */ + + struct { + __I uint32_t C1R2P : 1; /*!< gclk_c1r2_pll_lock */ + __I uint32_t C1R1P : 1; /*!< gclk_c1r1_pll_lock */ + __I uint32_t C2R1P : 1; /*!< gclk_c2r1_pll_lock */ + __I uint32_t C2R2P : 1; /*!< gclk_c2r2_pll_lock */ + __I uint32_t C1R2D : 1; /*!< gclk_c1r2_dll_lock */ + __I uint32_t C1R1D : 1; /*!< gclk_c1r1_dll_lock */ + __I uint32_t C2R1D : 1; /*!< gclk_c2r1_dll_lock */ + __I uint32_t C2R2D : 1; /*!< gclk_c2r2_dll_lock */ + } GCLK_b; /*!< BitSize */ + }; +} PDLOCK_Type; + + +/* ================================================================================ */ +/* ================ PDPROT ================ */ +/* ================================================================================ */ + + +/** + * @brief PLL DLL PROTECT (PDPROT) + */ + +typedef struct { /*!< PDPROT Structure */ + + union { + __O uint32_t LOCK; /*!< LOCK */ + + struct { + __O uint32_t EN : 1; /*!< Enable the PLL DLL Lock to Protect it */ + } LOCK_b; /*!< BitSize */ + }; +} PDPROT_Type; + + +/* ================================================================================ */ +/* ================ CFG_CTRL ================ */ +/* ================================================================================ */ + + +/** + * @brief CFG_CTRL (CFG_CTRL) + */ + +typedef struct { /*!< CFG_CTRL Structure */ + __I uint32_t RESERVED0[3]; + + union { + __IO uint32_t DONE; /*!< DONE CFG */ + + struct { + __IO uint32_t CMD : 1; /*!< Write 1 indicate all chain data write over */ + __IO uint32_t STA : 1; /*!< 1= all chain config process over, chip is in user mode */ + } DONE_b; /*!< BitSize */ + }; + __I uint32_t RESERVED1[34]; + + union { + __IO uint32_t PDLLSTR; /*!< PLL DLL RESET */ + + struct { + __IO uint32_t C1R1P : 1; /*!< C1r1_rstpll_n, low active */ + __IO uint32_t C1R2P : 1; /*!< C1r2_rstpll_n, low active */ + __IO uint32_t C2R1P : 1; /*!< C2r1_rstpll_n, low active */ + __IO uint32_t C2R2P : 1; /*!< C2r2_rstpll_n, low active */ + __IO uint32_t C1R1D : 1; /*!< C1r1_rstdll_n, low active */ + __IO uint32_t C1R2D : 1; /*!< C1r2_rstdll_n, low active */ + __IO uint32_t C2R1D : 1; /*!< C2r1_rstdll_n, low active */ + __IO uint32_t C2R2D : 1; /*!< C2r2_rstdll_n, low active */ + } PDLLSTR_b; /*!< BitSize */ + }; +} CFG_CTRL_Type; + + +/* ================================================================================ */ +/* ================ SOFT_RESET ================ */ +/* ================================================================================ */ + + +/** + * @brief SUB SOFT RESET (SOFT_RESET) + */ + +typedef struct { /*!< SOFT_RESET Structure */ + + union { + __IO uint32_t SOFTRST; /*!< SOFTRST */ + + struct { + __IO uint32_t CAN1_n : 1; /*!< soft_rst_can1_n */ + __IO uint32_t CAN0_n : 1; /*!< soft_rst_can0_n */ + __IO uint32_t I2C1_n : 1; /*!< soft_rst_i2c1_n */ + __IO uint32_t I2C0_n : 1; /*!< soft_rst_i2c0_n */ + __IO uint32_t SPI1_n : 1; /*!< soft_rst_spi1_n */ + __IO uint32_t SPI0_n : 1; /*!< soft_rst_spi0_n */ + __IO uint32_t UART1_n : 1; /*!< soft_rst_uart1_n */ + __IO uint32_t UART0_n : 1; /*!< soft_rst_uart0_n */ + __IO uint32_t RTC_n : 1; /*!< soft_rst_rtc_n */ + __IO uint32_t GPIO_n : 1; /*!< soft_rst_gpio_n */ + __IO uint32_t TIMER_n : 1; /*!< soft_rst_timer_n */ + __IO uint32_t WDT_n : 1; /*!< soft_rst_wdt_n */ + __IO uint32_t LVDS_n : 1; /*!< soft_rst_lvds_n */ + __IO uint32_t FLS_n : 1; /*!< soft_rst_fls_n */ + __IO uint32_t DMAC_AHB_n : 1; /*!< soft_rst_dmac_ahb_n */ + __IO uint32_t USB_AHB_n : 1; /*!< soft_rst_usb_ahb_n */ + __IO uint32_t ETH_AHB_n : 1; /*!< soft_rst_eth_ahb_n */ + __IO uint32_t DDRC_n : 1; /*!< soft_rst_ddrc_n */ + __IO uint32_t ARM_HCLK_n : 1; /*!< soft_rst_arm_HCLK_n */ + __IO uint32_t _48_n : 1; /*!< soft_rst_48_n */ + __IO uint32_t UTM_n : 1; /*!< soft_rst_utmi_n */ + __IO uint32_t CACHE_n : 1; /*!< soft_rst_cache_n */ + __IO uint32_t USB_n : 1; /*!< soft_rst_cache_n */ + __IO uint32_t ETH_RX_n : 1; /*!< soft_rst_eth_rx_i_n */ + __IO uint32_t ETH_TX_n : 1; /*!< soft_rst_eth_tx_i_n */ + __IO uint32_t ADC_n : 1; /*!< soft_rst_adc_n */ + __IO uint32_t EFUSE_n : 1; /*!< soft_rst_efuse_n */ + __IO uint32_t Reserved1_n: 1; /*!< Reserved11 */ + __IO uint32_t AES_n : 1; /*!< soft_rst_aes_n */ + __IO uint32_t UART2_n : 1; /*!< soft_rst_uart2_n */ + __IO uint32_t AS_n : 1; /*!< soft_rst_as_n */ + __IO uint32_t FDCD_n : 1; /*!< soft_rst_fdcd_n */ + } SOFTRST_b; /*!< BitSize */ + }; +} SOFT_RESET_Type; + + +/* -------------------- End of section using anonymous unions ------------------- */ +#if defined(__CC_ARM) + #pragma pop +#elif defined(__ICCARM__) + /* leave anonymous unions enabled */ +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__TMS470__) + /* anonymous unions are enabled by default */ +#elif defined(__TASKING__) + #pragma warning restore +#else + #warning Not supported compiler type +#endif + + + + +/* ================================================================================ */ +/* ================ Peripheral memory map ================ */ +/* ================================================================================ */ + +#define UART0_BASE 0x41005000UL +#define UART1_BASE 0x4100C000UL +#define UART2_BASE 0x4100E000UL +#define WDG_BASE 0x41001000UL +#define TIMER0_BASE 0x41000000UL +#define TIMER1_BASE 0x41000020UL +#define TIMER2_BASE 0x41000040UL +#define TIMER3_BASE 0x41000060UL +#define SPI0_BASE 0x41004000UL +#define SPI1_BASE 0x4100B000UL +#define I2C0_BASE 0x41003000UL +#define I2C1_BASE 0x4100A000UL +#define RTC_BASE 0x41007004UL +#define GPIO_BASE 0x41002000UL +#define NOR_FLASH_BASE 0x40800000UL +#define ADC_BASE 0x41006000UL +#define EFUSE_BASE 0x41008000UL +#define CAN0_BASE 0x41009000UL +#define CAN1_BASE 0x4100D000UL +#define DMA_BASE 0x41500000UL +#define ETH_BASE 0x41200000UL +#define USB_BASE 0x41300000UL +#define GLOBAL_CTRL_BASE 0x41007010UL +#define AES_BASE 0x41600000UL +#define DDRC_BASE 0x41400000UL +#define PDLOCK_BASE 0x41007000UL +#define PDPROT_BASE 0x41007C00UL +#define CFG_CTRL_BASE 0x41700000UL +#define SOFT_RESET_BASE 0x41007400UL + + +/* ================================================================================ */ +/* ================ Peripheral declaration ================ */ +/* ================================================================================ */ + +#define UART0 ((UART0_Type *) UART0_BASE) +#define UART1 ((UART0_Type *) UART1_BASE) +#define UART2 ((UART0_Type *) UART2_BASE) +#define WDG ((WDG_Type *) WDG_BASE) +#define TIMER0 ((TIMER0_Type *) TIMER0_BASE) +#define TIMER1 ((TIMER0_Type *) TIMER1_BASE) +#define TIMER2 ((TIMER0_Type *) TIMER2_BASE) +#define TIMER3 ((TIMER0_Type *) TIMER3_BASE) +#define SPI0 ((SPI0_Type *) SPI0_BASE) +#define SPI1 ((SPI0_Type *) SPI1_BASE) +#define I2C0 ((I2C0_Type *) I2C0_BASE) +#define I2C1 ((I2C0_Type *) I2C1_BASE) +#define RTC ((RTC_Type *) RTC_BASE) +#define GPIO ((GPIO_Type *) GPIO_BASE) +#define NOR_FLASH ((NOR_FLASH_Type *) NOR_FLASH_BASE) +#define ADC ((ADC_Type *) ADC_BASE) +#define EFUSE ((EFUSE_Type *) EFUSE_BASE) +#define CAN0 ((CAN0_Type *) CAN0_BASE) +#define CAN1 ((CAN0_Type *) CAN1_BASE) +#define DMA ((DMA_Type *) DMA_BASE) +#define ETH ((ETH_Type *) ETH_BASE) +#define USB ((USB_Type *) USB_BASE) +#define GLOBAL_CTRL ((GLOBAL_CTRL_Type *) GLOBAL_CTRL_BASE) +#define AES ((AES_Type *) AES_BASE) +#define DDRC ((DDRC_Type *) DDRC_BASE) +#define PDLOCK ((PDLOCK_Type *) PDLOCK_BASE) +#define PDPROT ((PDPROT_Type *) PDPROT_BASE) +#define CFG_CTRL ((CFG_CTRL_Type *) CFG_CTRL_BASE) +#define SOFT_RESET ((SOFT_RESET_Type *) SOFT_RESET_BASE) + + +/** @} */ /* End of group Device_Peripheral_Registers */ +/** @} */ /* End of group cmem7 */ +/** @} */ /* End of group (null) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* cmem7_H */ + diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h index 28088028b2..f6a2757476 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h @@ -43,12 +43,12 @@ #define _TIM #define _UART #define _USB -#define _WDG
+#define _WDG -//#define _MARVELL
-//#define _IP1826D
-#define _M7NORFLASH
-#define _ME_6095_F
+//#define _MARVELL +//#define _IP1826D +#define _M7NORFLASH +#define _ME_6095_F #define USE_FULL_ASSERT 1 @@ -76,8 +76,8 @@ typedef enum _BOOL {FALSE = 0, TRUE = 1} BOOL; /** * System clock frequency, unit is Hz. */ -#define SYSTEM_CLOCK_FREQ 300000000
-//250000000
+#define SYSTEM_CLOCK_FREQ 300000000 +//250000000 //300000000 /** diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h index a5663ea869..4edeca9205 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h @@ -1,417 +1,417 @@ -/**
- *****************************************************************************
- * @file cmem7_eth.h
- *
- * @brief CMEM7 ethernet header file
- *
- *
- * @version V1.0
- * @date 3. September 2013
- *
- * @note
- *
- *****************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
- * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
- *****************************************************************************
- */
-
-#ifndef __CMEM7_ETH_H
-#define __CMEM7_ETH_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "cmem7.h"
-#include "cmem7_conf.h"
-
-/** @defgroup ETH_SPEED
- * @{
- */
-#define ETH_SPEED_10M 0x0
-#define ETH_SPEED_100M 0x1
-#define ETH_SPEED_1000M 0x2
-
-#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
- ((SPEED) == ETH_SPEED_100M) || \
- ((SPEED) == ETH_SPEED_1000M))
-/**
- * @}
- */
-
-/** @defgroup ETH_DUPLEX
- * @{
- */
-#define ETH_DUPLEX_HALF 0x0
-#define ETH_DUPLEX_FULL 0x1
-
-#define IS_ETH_DUPLEX(DUPLEX) (((DUPLEX) == ETH_DUPLEX_HALF) || \
- ((DUPLEX) == ETH_DUPLEX_FULL))
-/**
- * @}
- */
-
-/** @defgroup ETH_INT
- * @{
- */
-#define ETH_INT_TX_COMPLETE_FRAME 0x0001
-#define ETH_INT_TX_STOP 0x0002
-#define ETH_INT_TX_BUF_UNAVAI 0x0004
-#define ETH_INT_RX_OVERFLOW 0x0010
-#define ETH_INT_TX_UNDERFLOW 0x0020
-#define ETH_INT_RX_COMPLETE_FRAME 0x0040
-#define ETH_INT_RX_BUF_UNAVAI 0x0080
-#define ETH_INT_RX_STOP 0x0100
-#define ETH_INT_BUS_FATAL_ERROR 0x2000
-#define ETH_INT_ALL (ETH_INT_TX_COMPLETE_FRAME | \
- ETH_INT_TX_STOP | \
- ETH_INT_TX_BUF_UNAVAI | \
- ETH_INT_RX_OVERFLOW | \
- ETH_INT_TX_UNDERFLOW | \
- ETH_INT_RX_COMPLETE_FRAME | \
- ETH_INT_RX_BUF_UNAVAI | \
- ETH_INT_RX_STOP | \
- ETH_INT_BUS_FATAL_ERROR)
-
-#define IS_ETH_INT(INT) (((INT) != 0) && (((INT) & ~ETH_INT_ALL) == 0))
-/**
- * @}
- */
-/**
- * @brief EFUSE receive filter structure
- */
-typedef struct
-{
- BOOL ETH_BroadcastFilterEnable; /*!< Broadcast is dropped or passed */
- BOOL ETH_OwnFilterEnable; /*!< source address filter is on or off */
- BOOL ETH_SelfDrop; /*!< Only own address is dropped or passed */
- BOOL ETH_SourceFilterEnable; /*!< source address filter is on or off */
- BOOL ETH_SourceDrop; /*!< Only specific source address is dropped or passed */
- uint8_t ETH_SourceMacAddr[6]; /*!< Source MAC address */
-} ETH_FrameFilter;
-
-/**
- * @brief Ethernet initialization structure
- */
-typedef struct
-{
- BOOL ETH_LinkUp; /*!< If ETH is linked up and it can be retrieved from PHY */
- uint8_t ETH_Speed; /*!< speed of ETH, refer as @ref ETH_SPEED */
- uint8_t ETH_Duplex; /*!< duplex mode of ETH, refer as @ref ETH_DUPLEX */
- BOOL ETH_RxEn; /*!< Rx enable */
- BOOL ETH_TxEn; /*!< Tx enable */
- BOOL ETH_ChecksumOffload; /*!< Checksum offload enable */
- BOOL ETH_JumboFrame; /*!< Jumbo Frame Enable */
- uint8_t ETH_MacAddr[6]; /*!< MAC address */
- ETH_FrameFilter *ETH_Filter; /*!< Received frame address filter, receive all if null */
-} ETH_InitTypeDef;
-
-/**
- * @brief Ethernet Tx descriptor structure
- */
-typedef struct {
- union {
- uint32_t TX0;
-
- struct {
- uint32_t : 1;
- uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */
- uint32_t : 1;
- uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */
- uint32_t : 1;
- uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */
- uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */
- uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */
- uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */
- uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */
- uint32_t : 2;
- uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */
- uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */
- uint32_t : 8;
- uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */
- uint32_t : 2;
- uint32_t FS : 1; /*!< first segment flag */
- uint32_t LS : 1; /*!< last segment flag */
- uint32_t : 2;
- } TX0_b;
- } TX_0;
-
- union {
- uint32_t TX1;
-
- struct {
- uint32_t SIZE : 13; /*!< buffer size */
- uint32_t : 19;
- } TX1_b;
- } TX_1;
-
- uint32_t bufAddr; /*!< address of buffer */
- uint32_t nextDescAddr; /*!< address of next descriptor */
- uint64_t reserved;
- uint64_t timeStamp; /*!< time stamp while last segment */
-} ETH_TX_DESC;
-
-/**
- * @brief Ethernet Rx descriptor structure
- */
-typedef struct {
- union {
- uint32_t RX0;
-
- struct {
- uint32_t : 1;
- uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */
- uint32_t : 5;
- uint32_t TTSE : 1; /*!< timestamp available while last segment */
- uint32_t LS : 1; /*!< [OUT] last segment flag */
- uint32_t FS : 1; /*!< [OUT] first segment flag */
- uint32_t : 1;
- uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */
- uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */
- uint32_t : 2;
- uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */
- uint32_t FL : 14; /*!< [OUT] frame length while last segment */
- uint32_t : 2;
- } RX0_b;
- } RX_0;
-
- union {
- uint32_t RX1;
-
- struct {
- uint32_t SIZE : 13; /*!< buffer size */
- uint32_t : 19;
- } RX1_b;
- } RX_1;
-
- uint32_t bufAddr; /*!< buffer address */
- uint32_t nextDescAddr; /*!< address of next descriptor */
- uint64_t reserved;
- uint64_t timeStamp; /*!< time stamp while the last segment */
-} ETH_RX_DESC;
-
-/**
- * @brief Read data from phy chip
- * @param[in] phyAddr Address of phy chip
- * @param[in] phyReg Address of phy's register to be read
- * @retval uint32_t value of phy's register
- */
-uint32_t ETH_PhyRead(uint32_t phyAddr, uint32_t phyReg);
-
-/**
- * @brief Write data to phy chip
- * @param[in] phyAddr Address of phy chip
- * @param[in] phyReg Address of phy's register to be written
- * @param[in] data Data to be written
- * @retval None
- */
-void ETH_PhyWrite(uint32_t phyAddr, uint32_t phyReg, uint32_t data);
-/**
- * @brief Fills each ETH_InitStruct member with its default value.
- * @param ETH_InitStruct: pointer to a ETH_InitTypeDef structure
- * which will be initialized.
- * @retval : None
- */
-void ETH_StructInit(ETH_InitTypeDef* init);
-/**
- * @brief Ethernet initialization
- * @note This function should be called at first before any other interfaces.
- * @param[in] init A pointer to structure ETH_InitTypeDef
- * @retval BOOL The bit indicates if ethernet is initialized successfully
- */
-BOOL ETH_Init(ETH_InitTypeDef *init);
-
-/**
- * @brief Enable or disable ethernet interrupt.
- * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT
- * @param[in] Enable The bit indicates if specific interrupts are enable or not
- * @retval None
- */
-void ETH_ITConfig(uint32_t Int, BOOL enable);
-
-/**
- * @brief Check specific interrupts are set or not
- * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT
- * @retval BOOL The bit indicates if specific interrupts are set or not
- */
-BOOL ETH_GetITStatus(uint32_t Int);
-
-/**
- * @brief Clear specific interrupts
- * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT
- * @retval None
- */
-void ETH_ClearITPendingBit(uint32_t Int);
-
-/**
- * @brief Get ethernte MAC address
- * @param[in] mac A user-allocated buffer to fetch MAC to be read, 6 bytes.
- * @retval None
- */
-void ETH_GetMacAddr(uint8_t *mac);
-
-/**
- * @brief Set ethernet transmission descriptor ring
- * @note Make sure that memory occupied by descriptors should be in physical
- * memory and keep valid before ethernet transmission is finished.
- * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node
- * has a 'nextDescAddr' pointed to first node.
- * @retval BOOL The bit indicates if valid ring is set
- */
-BOOL ETH_SetTxDescRing(ETH_TX_DESC *ring);
-
-/**
- * @brief Start ethernet transmission
- * @param None
- * @retval None
- */
-void ETH_StartTx(void);
-
-/**
- * @brief Stop ethernet transmission
- * @param None
- * @retval None
- */
-void ETH_StopTx(void);
-
-/**
- * @brief Resume ethernet transmission\n
- * While ethernet doesn't have enough buffer to transmit data, it will
- * pause and inform users by interrupt 'ETH_INT_TX_BUF_UNAVAI'. Users
- * must call this function to start ethernet again after new buffer
- * prepared.
- * @param None
- * @retval None
- */
-void ETH_ResumeTx(void);
-
-/**
- * @brief Get free transmission descriptor\n
- * @param None
- * @retval ETH_TX_DESC* A pointer of free transmission descriptor,
- * NULL if no free descriptor
- */
-ETH_TX_DESC *ETH_AcquireFreeTxDesc(void);
-
-/**
- * @brief Check if a transmission descriptor is free or not
- * @param[in] desc A pointer of a transmission descriptor
- * @retval BOOL True if the transmission descriptor is free, or flase.
- */
-BOOL ETH_IsFreeTxDesc(ETH_TX_DESC *desc);
-
-/**
- * @brief Release a transmission descriptor to ethernet\n
- * After users prepared data in the buffer of a free descriptor,
- * They must call this function to change ownership of the
- * descriptor to hardware.
- * @param[in] desc A pointer of a transmission descriptor
- * @retval None
- */
-void ETH_ReleaseTxDesc(ETH_TX_DESC *desc);
-
-/**
- * @brief Set buffer address of the specific TX descriptor
- * @param[in] desc A pointer of a transmission descriptor
- * @param[in] bufAddr buffer address to be sent
- * @retval None
- */
-void ETH_SetTxDescBufAddr(ETH_TX_DESC *desc, uint32_t bufAddr);
-
-/**
- * @brief Get buffer address of the specific TX descriptor
- * @param[in] desc A pointer of a transmission descriptor
- * @retval uint32_t buffer address to be gotten
- */
-uint32_t ETH_GetTxDescBufAddr(ETH_TX_DESC *desc);
-
-/**
- * @brief Set ethernet receive descriptor ring
- * @note Make sure that memory occupied by descriptors should be in physical
- * memory and keep valid before ethernet receive is finished.
- * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node
- * has a 'nextDescAddr' pointed to first node.
- * @retval BOOL The bit indicates if valid ring is set
- */
-BOOL ETH_SetRxDescRing(ETH_RX_DESC *ring);
-
-/**
- * @brief Start ethernet receive
- * @param None
- * @retval None
- */
-void ETH_StartRx(void);
-
-/**
- * @brief Stop ethernet receive
- * @param None
- * @retval None
- */
-void ETH_StopRx(void);
-
-/**
- * @brief Resume ethernet receive\n
- * While ethernet doesn't have enough buffer to receive data, it will
- * pause and inform users by interrupt 'ETH_INT_RX_BUF_UNAVAI'. Users
- * must call this function to start ethernet again after new buffer
- * prepared.
- * @param None
- * @retval None
- */
-void ETH_ResumeRx(void);
-
-/**
- * @brief Get the free descriptor which contains received data\n
- * @param None
- * @retval ETH_RX_DESC* A pointer of free receive descriptor,
- * NULL if no free descriptor
- */
-ETH_RX_DESC *ETH_AcquireFreeRxDesc(void);
-
-/**
- * @brief Check if a receive descriptor is free or not
- * @param[in] desc A pointer of a receive descriptor
- * @retval BOOL True if the receive descriptor is free, or flase.
- */
-BOOL ETH_IsFreeRxDesc(ETH_RX_DESC *desc);
-
-/**
- * @brief Release a receive descriptor to ethernet\n
- * After users handled data in the buffer of a free descriptor,
- * They must call this function to change ownership of the
- * descriptor to hardware.
- * @param[in] desc A pointer of a transmission descriptor
- * @retval None
- */
-void ETH_ReleaseRxDesc(ETH_RX_DESC *desc);
-
-/**
- * @brief Set buffer address of the specific RX descriptor
- * @param[in] desc A pointer of a receive descriptor
- * @param[in] bufAddr buffer address to be received
- * @retval None
- */
-void ETH_SetRxDescBufAddr(ETH_RX_DESC *desc, uint32_t bufAddr);
-
-/**
- * @brief Get buffer address of the specific RX descriptor
- * @param[in] desc A pointer of a receive descriptor
- * @retval uint32_t buffer address to be gotten
- */
-uint32_t ETH_GetRxDescBufAddr(ETH_RX_DESC *desc);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CMEM7_ETH_H */
-
+/** + ***************************************************************************** + * @file cmem7_eth.h + * + * @brief CMEM7 ethernet header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + +#ifndef __CMEM7_ETH_H +#define __CMEM7_ETH_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "cmem7.h" +#include "cmem7_conf.h" + +/** @defgroup ETH_SPEED + * @{ + */ +#define ETH_SPEED_10M 0x0 +#define ETH_SPEED_100M 0x1 +#define ETH_SPEED_1000M 0x2 + +#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \ + ((SPEED) == ETH_SPEED_100M) || \ + ((SPEED) == ETH_SPEED_1000M)) +/** + * @} + */ + +/** @defgroup ETH_DUPLEX + * @{ + */ +#define ETH_DUPLEX_HALF 0x0 +#define ETH_DUPLEX_FULL 0x1 + +#define IS_ETH_DUPLEX(DUPLEX) (((DUPLEX) == ETH_DUPLEX_HALF) || \ + ((DUPLEX) == ETH_DUPLEX_FULL)) +/** + * @} + */ + +/** @defgroup ETH_INT + * @{ + */ +#define ETH_INT_TX_COMPLETE_FRAME 0x0001 +#define ETH_INT_TX_STOP 0x0002 +#define ETH_INT_TX_BUF_UNAVAI 0x0004 +#define ETH_INT_RX_OVERFLOW 0x0010 +#define ETH_INT_TX_UNDERFLOW 0x0020 +#define ETH_INT_RX_COMPLETE_FRAME 0x0040 +#define ETH_INT_RX_BUF_UNAVAI 0x0080 +#define ETH_INT_RX_STOP 0x0100 +#define ETH_INT_BUS_FATAL_ERROR 0x2000 +#define ETH_INT_ALL (ETH_INT_TX_COMPLETE_FRAME | \ + ETH_INT_TX_STOP | \ + ETH_INT_TX_BUF_UNAVAI | \ + ETH_INT_RX_OVERFLOW | \ + ETH_INT_TX_UNDERFLOW | \ + ETH_INT_RX_COMPLETE_FRAME | \ + ETH_INT_RX_BUF_UNAVAI | \ + ETH_INT_RX_STOP | \ + ETH_INT_BUS_FATAL_ERROR) + +#define IS_ETH_INT(INT) (((INT) != 0) && (((INT) & ~ETH_INT_ALL) == 0)) +/** + * @} + */ +/** + * @brief EFUSE receive filter structure + */ +typedef struct +{ + BOOL ETH_BroadcastFilterEnable; /*!< Broadcast is dropped or passed */ + BOOL ETH_OwnFilterEnable; /*!< source address filter is on or off */ + BOOL ETH_SelfDrop; /*!< Only own address is dropped or passed */ + BOOL ETH_SourceFilterEnable; /*!< source address filter is on or off */ + BOOL ETH_SourceDrop; /*!< Only specific source address is dropped or passed */ + uint8_t ETH_SourceMacAddr[6]; /*!< Source MAC address */ +} ETH_FrameFilter; + +/** + * @brief Ethernet initialization structure + */ +typedef struct +{ + BOOL ETH_LinkUp; /*!< If ETH is linked up and it can be retrieved from PHY */ + uint8_t ETH_Speed; /*!< speed of ETH, refer as @ref ETH_SPEED */ + uint8_t ETH_Duplex; /*!< duplex mode of ETH, refer as @ref ETH_DUPLEX */ + BOOL ETH_RxEn; /*!< Rx enable */ + BOOL ETH_TxEn; /*!< Tx enable */ + BOOL ETH_ChecksumOffload; /*!< Checksum offload enable */ + BOOL ETH_JumboFrame; /*!< Jumbo Frame Enable */ + uint8_t ETH_MacAddr[6]; /*!< MAC address */ + ETH_FrameFilter *ETH_Filter; /*!< Received frame address filter, receive all if null */ +} ETH_InitTypeDef; + +/** + * @brief Ethernet Tx descriptor structure + */ +typedef struct { + union { + uint32_t TX0; + + struct { + uint32_t : 1; + uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */ + uint32_t : 1; + uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */ + uint32_t : 1; + uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */ + uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */ + uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */ + uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */ + uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */ + uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */ + uint32_t : 8; + uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */ + uint32_t : 2; + uint32_t FS : 1; /*!< first segment flag */ + uint32_t LS : 1; /*!< last segment flag */ + uint32_t : 2; + } TX0_b; + } TX_0; + + union { + uint32_t TX1; + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 19; + } TX1_b; + } TX_1; + + uint32_t bufAddr; /*!< address of buffer */ + uint32_t nextDescAddr; /*!< address of next descriptor */ + uint64_t reserved; + uint64_t timeStamp; /*!< time stamp while last segment */ +} ETH_TX_DESC; + +/** + * @brief Ethernet Rx descriptor structure + */ +typedef struct { + union { + uint32_t RX0; + + struct { + uint32_t : 1; + uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */ + uint32_t : 5; + uint32_t TTSE : 1; /*!< timestamp available while last segment */ + uint32_t LS : 1; /*!< [OUT] last segment flag */ + uint32_t FS : 1; /*!< [OUT] first segment flag */ + uint32_t : 1; + uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */ + uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */ + uint32_t FL : 14; /*!< [OUT] frame length while last segment */ + uint32_t : 2; + } RX0_b; + } RX_0; + + union { + uint32_t RX1; + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 19; + } RX1_b; + } RX_1; + + uint32_t bufAddr; /*!< buffer address */ + uint32_t nextDescAddr; /*!< address of next descriptor */ + uint64_t reserved; + uint64_t timeStamp; /*!< time stamp while the last segment */ +} ETH_RX_DESC; + +/** + * @brief Read data from phy chip + * @param[in] phyAddr Address of phy chip + * @param[in] phyReg Address of phy's register to be read + * @retval uint32_t value of phy's register + */ +uint32_t ETH_PhyRead(uint32_t phyAddr, uint32_t phyReg); + +/** + * @brief Write data to phy chip + * @param[in] phyAddr Address of phy chip + * @param[in] phyReg Address of phy's register to be written + * @param[in] data Data to be written + * @retval None + */ +void ETH_PhyWrite(uint32_t phyAddr, uint32_t phyReg, uint32_t data); +/** + * @brief Fills each ETH_InitStruct member with its default value. + * @param ETH_InitStruct: pointer to a ETH_InitTypeDef structure + * which will be initialized. + * @retval : None + */ +void ETH_StructInit(ETH_InitTypeDef* init); +/** + * @brief Ethernet initialization + * @note This function should be called at first before any other interfaces. + * @param[in] init A pointer to structure ETH_InitTypeDef + * @retval BOOL The bit indicates if ethernet is initialized successfully + */ +BOOL ETH_Init(ETH_InitTypeDef *init); + +/** + * @brief Enable or disable ethernet interrupt. + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @retval None + */ +void ETH_ITConfig(uint32_t Int, BOOL enable); + +/** + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @retval BOOL The bit indicates if specific interrupts are set or not + */ +BOOL ETH_GetITStatus(uint32_t Int); + +/** + * @brief Clear specific interrupts + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @retval None + */ +void ETH_ClearITPendingBit(uint32_t Int); + +/** + * @brief Get ethernte MAC address + * @param[in] mac A user-allocated buffer to fetch MAC to be read, 6 bytes. + * @retval None + */ +void ETH_GetMacAddr(uint8_t *mac); + +/** + * @brief Set ethernet transmission descriptor ring + * @note Make sure that memory occupied by descriptors should be in physical + * memory and keep valid before ethernet transmission is finished. + * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node + * has a 'nextDescAddr' pointed to first node. + * @retval BOOL The bit indicates if valid ring is set + */ +BOOL ETH_SetTxDescRing(ETH_TX_DESC *ring); + +/** + * @brief Start ethernet transmission + * @param None + * @retval None + */ +void ETH_StartTx(void); + +/** + * @brief Stop ethernet transmission + * @param None + * @retval None + */ +void ETH_StopTx(void); + +/** + * @brief Resume ethernet transmission\n + * While ethernet doesn't have enough buffer to transmit data, it will + * pause and inform users by interrupt 'ETH_INT_TX_BUF_UNAVAI'. Users + * must call this function to start ethernet again after new buffer + * prepared. + * @param None + * @retval None + */ +void ETH_ResumeTx(void); + +/** + * @brief Get free transmission descriptor\n + * @param None + * @retval ETH_TX_DESC* A pointer of free transmission descriptor, + * NULL if no free descriptor + */ +ETH_TX_DESC *ETH_AcquireFreeTxDesc(void); + +/** + * @brief Check if a transmission descriptor is free or not + * @param[in] desc A pointer of a transmission descriptor + * @retval BOOL True if the transmission descriptor is free, or flase. + */ +BOOL ETH_IsFreeTxDesc(ETH_TX_DESC *desc); + +/** + * @brief Release a transmission descriptor to ethernet\n + * After users prepared data in the buffer of a free descriptor, + * They must call this function to change ownership of the + * descriptor to hardware. + * @param[in] desc A pointer of a transmission descriptor + * @retval None + */ +void ETH_ReleaseTxDesc(ETH_TX_DESC *desc); + +/** + * @brief Set buffer address of the specific TX descriptor + * @param[in] desc A pointer of a transmission descriptor + * @param[in] bufAddr buffer address to be sent + * @retval None + */ +void ETH_SetTxDescBufAddr(ETH_TX_DESC *desc, uint32_t bufAddr); + +/** + * @brief Get buffer address of the specific TX descriptor + * @param[in] desc A pointer of a transmission descriptor + * @retval uint32_t buffer address to be gotten + */ +uint32_t ETH_GetTxDescBufAddr(ETH_TX_DESC *desc); + +/** + * @brief Set ethernet receive descriptor ring + * @note Make sure that memory occupied by descriptors should be in physical + * memory and keep valid before ethernet receive is finished. + * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node + * has a 'nextDescAddr' pointed to first node. + * @retval BOOL The bit indicates if valid ring is set + */ +BOOL ETH_SetRxDescRing(ETH_RX_DESC *ring); + +/** + * @brief Start ethernet receive + * @param None + * @retval None + */ +void ETH_StartRx(void); + +/** + * @brief Stop ethernet receive + * @param None + * @retval None + */ +void ETH_StopRx(void); + +/** + * @brief Resume ethernet receive\n + * While ethernet doesn't have enough buffer to receive data, it will + * pause and inform users by interrupt 'ETH_INT_RX_BUF_UNAVAI'. Users + * must call this function to start ethernet again after new buffer + * prepared. + * @param None + * @retval None + */ +void ETH_ResumeRx(void); + +/** + * @brief Get the free descriptor which contains received data\n + * @param None + * @retval ETH_RX_DESC* A pointer of free receive descriptor, + * NULL if no free descriptor + */ +ETH_RX_DESC *ETH_AcquireFreeRxDesc(void); + +/** + * @brief Check if a receive descriptor is free or not + * @param[in] desc A pointer of a receive descriptor + * @retval BOOL True if the receive descriptor is free, or flase. + */ +BOOL ETH_IsFreeRxDesc(ETH_RX_DESC *desc); + +/** + * @brief Release a receive descriptor to ethernet\n + * After users handled data in the buffer of a free descriptor, + * They must call this function to change ownership of the + * descriptor to hardware. + * @param[in] desc A pointer of a transmission descriptor + * @retval None + */ +void ETH_ReleaseRxDesc(ETH_RX_DESC *desc); + +/** + * @brief Set buffer address of the specific RX descriptor + * @param[in] desc A pointer of a receive descriptor + * @param[in] bufAddr buffer address to be received + * @retval None + */ +void ETH_SetRxDescBufAddr(ETH_RX_DESC *desc, uint32_t bufAddr); + +/** + * @brief Get buffer address of the specific RX descriptor + * @param[in] desc A pointer of a receive descriptor + * @retval uint32_t buffer address to be gotten + */ +uint32_t ETH_GetRxDescBufAddr(ETH_RX_DESC *desc); + +#ifdef __cplusplus +} +#endif + +#endif /* __CMEM7_ETH_H */ + diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h index b2ef305965..c0737b5295 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h @@ -200,14 +200,14 @@ void FLASH_Read(uint8_t ReadMode, uint32_t addr, uint16_t size, uint8_t* data); * @param[out] data A pointer to the data to be written * @retval None */ -void FLASH_Write(uint32_t addr, uint16_t size, uint8_t* data);
-
-
-void flash_WaitInWritting(void) ;
-
-void flash_WaitReadFifoNotEmpty(void);
-
-uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) ;
+void FLASH_Write(uint32_t addr, uint16_t size, uint8_t* data); + + +void flash_WaitInWritting(void) ; + +void flash_WaitReadFifoNotEmpty(void); + +uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) ; #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h index e76d9d42d2..1652a8a5d2 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h @@ -139,17 +139,17 @@ void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLev * @retval None */ void GPIO_EnablePwm(uint8_t Channel, BOOL Enable); -
-
-
-/**
- xjf 20150324
-
-**/
-void GPIO_SetBits(uint32_t mask);
-void GPIO_clrBits(uint32_t mask);
-uint32_t GPIO_getBits(uint32_t mask);
-
+ + + +/** + xjf 20150324 + +**/ +void GPIO_SetBits(uint32_t mask); +void GPIO_clrBits(uint32_t mask); +uint32_t GPIO_getBits(uint32_t mask); + #ifdef __cplusplus } diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h index 54d608dc41..bb2adcd2a9 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h @@ -101,16 +101,16 @@ #ifdef _WDG #include "cmem7_wdg.h" #endif -
-
-#ifdef _MARVELL
- #include <marvel_98dx242.h>
- #include <s24g_i2c.h>
-#endif
-
-#ifdef _IP1826D
- #include <ip1826d_v00.h>
-#endif
+ + +#ifdef _MARVELL + #include <marvel_98dx242.h> + #include <s24g_i2c.h> +#endif + +#ifdef _IP1826D + #include <ip1826d_v00.h> +#endif #ifdef __cplusplus } diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h index 43744c2625..820a8ea59f 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h @@ -1,276 +1,276 @@ -/**
- *****************************************************************************
- * @file cmem7_misc.h
- *
- * @brief CMEM7 miscellaneous header file
- *
- *
- * @version V1.0
- * @date 3. September 2013
- *
- * @note
- *
- *****************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
- * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
- *****************************************************************************
- */
-
-#ifndef __CMEM7_MISC_H
-#define __CMEM7_MISC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "cmem7.h"
-#include "cmem7_conf.h"
-
-/**
- * @brief NVIC initialization structure
- */
-/**
-@code
- The table below gives the allowed values of the pre-emption priority and subpriority according
- to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
- ============================================================================================================================
- NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
- ============================================================================================================================
- NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
- | | | 4 bits for subpriority
- ----------------------------------------------------------------------------------------------------------------------------
- NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
- | | | 3 bits for subpriority
- ----------------------------------------------------------------------------------------------------------------------------
- NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
- | | | 2 bits for subpriority
- ----------------------------------------------------------------------------------------------------------------------------
- NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
- | | | 1 bits for subpriority
- ----------------------------------------------------------------------------------------------------------------------------
- NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
- | | | 0 bits for subpriority
- ============================================================================================================================
-@endcode
- */
-
-typedef struct
-{
- uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
- This parameter can be a value of @ref IRQn_Type
- (For the complete Capital-micro Devices IRQ Channels list, please
- refer to cmem7.h file) */
-
- uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
- specified in NVIC_IRQChannel. This parameter can be a value
- between 0 and 15 as described in the table @ref NVIC_Priority_Table */
-
- uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
- in NVIC_IRQChannel. This parameter can be a value
- between 0 and 15 as described in the table @ref NVIC_Priority_Table */
-
- BOOL NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
- will be enabled or disabled.
- This parameter can be set either to ENABLE or DISABLE */
-} NVIC_InitTypeDef;
-
-
-/** @defgroup NVIC_VectTab
- * @{
- */
-
-#define NVIC_VectTab_CME_CODE ((uint32_t)0x00000000)
-#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
-#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
-#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_CME_CODE) || \
- ((VECTTAB) == NVIC_VectTab_RAM) || \
- ((VECTTAB) == NVIC_VectTab_FLASH))
-/**
- * @}
- */
-
-/** @defgroup NVIC_LP
- * @{
- */
-#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
-#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
-#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
-#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
- ((LP) == NVIC_LP_SLEEPDEEP) || \
- ((LP) == NVIC_LP_SLEEPONEXIT))
-/**
- * @}
- */
-
-/** @defgroup NVIC_PriorityGroup
- * @{
- */
-#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
- 4 bits for subpriority */
-#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
- 3 bits for subpriority */
-#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
- 2 bits for subpriority */
-#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
- 1 bits for subpriority */
-#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
- 0 bits for subpriority */
-
-#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
- ((GROUP) == NVIC_PriorityGroup_1) || \
- ((GROUP) == NVIC_PriorityGroup_2) || \
- ((GROUP) == NVIC_PriorityGroup_3) || \
- ((GROUP) == NVIC_PriorityGroup_4))
-/**
- * @}
- */
-
-#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
-
-#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
-
-#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
-
-/**
- * @brief Configures the priority grouping: pre-emption priority and subpriority.
- * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
- * This parameter can be one of the following values, ref as @ref NVIC_PriorityGroup:
- * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
- * 4 bits for subpriority
- * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
- * 3 bits for subpriority
- * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
- * 2 bits for subpriority
- * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
- * 1 bits for subpriority
- * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
- * 0 bits for subpriority
- * @retval None
- */
-void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
-
-/**
- * @brief Initializes the NVIC peripheral according to the specified
- * parameters in the NVIC_InitStruct.
- * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
- * the configuration information for the specified NVIC peripheral.
- * @retval None
- */
-void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
-
-/**
- * @brief Sets the vector table location and Offset.
- * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
- * This parameter can be one of the following values, ref as @ref NVIC_VectTab:
- * @arg NVIC_VectTab_RAM
- * @arg NVIC_VectTab_FLASH
- * @param Offset: Vector Table base offset field. This value must be a multiple
- * of 0x200.
- * @retval None
- */
-void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
-
-/**
- * @brief Selects the condition for the system to enter low power mode.
- * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
- * This parameter can be one of the following values, ref as @ref NVIC_LP:
- * @arg NVIC_LP_SEVONPEND
- * @arg NVIC_LP_SLEEPDEEP
- * @arg NVIC_LP_SLEEPONEXIT
- * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState);
-
-/**
- * @brief Memory map from address 'from' to 'address 'to' and open icache or not
- * @param[in] from address to be mapped from
- * @param[in] to address to be mapped to
- * @param[in] isIcacheOn icache is on or off
- * @retval None
- */
-void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn);
-
-/**
- * @brief Convert the mapping destination address to source address
- * @param[in] to address to be mapped to
- * @retval uint32_t address to be mapped from
- */
-uint32_t GLB_ConvertToMappingFromAddr(uint32_t to);
-
-/**
- * @brief Convert the mapping source address to destination address
- * @param[in] from address to be mapped from
- * @retval uint32_t address to be mapped to
- */
-uint32_t GLB_ConvertToMappingToAddr(uint32_t from);
-
-/**
- * @brief Set NMI irq number, it should be one of @ref IRQn_Type.
- * @Note You can assign any valid IRQn_Type to NMI. After that, you will enter NMI
- * interrupt routine if the specific 'irq' occurs. By default, NMI irq number
- * is 0, same as ETH_INT_IRQn
- * @param[in] irq irq number
- * @retval None
- */
-void GLB_SetNmiIrqNum(uint32_t irq);
-
-/** @defgroup SYS_CLK_SEL
- * @{
- */
-#define SYS_CLK_SEL_OSC 0x0
-#define SYS_CLK_SEL_DLL 0x1
-#define SYS_CLK_SEL_CRYSTAL 0x2
-#define SYS_CLK_SEL_EXTERNAL 0x3
-/**
- * @}
- */
-
-/**
- * @brief Select system clock source, it should be one of @ref SYS_CLK_SEL.
- * @Note You MUST make sure externel clock has been stabled if clock
- * source is external before call this function.
- * Default value is SYS_CLK_SEL_OSC
- * @param[in] irq irq number
- * @retval None
- */
-void GLB_SelectSysClkSource(uint8_t source);
-
-/**
- * @brief Simulate instruction 'STRB' or 'STRH' with 'BFI'
- * @Note In M7, you have to write a register in 32-bit alignment,
- * not in 8-bit or 16-bit.
- * @param[in] addr register address to be written
- * @param[in] value value to be written
- * @param[in] lsb LSB in register to be written
- * @param[in] len bit length to be written
- * @retval None
- */
-
-
-//#define aaaa(len) __asm("LDR len, 11")
-
-#define CMEM7_BFI(addr, value, lsb, len) \
- do { \
- unsigned long tmp; \
- unsigned long tmp1 = (unsigned long)addr; \
- \
- __asm("LDR tmp, [tmp1]\n" \
- "BFI tmp, "#value", "#lsb", "#len" \n" \
- "STR tmp, [tmp1]\n"); \
- } while (0)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CMEM7_MISC_H */
-
+/** + ***************************************************************************** + * @file cmem7_misc.h + * + * @brief CMEM7 miscellaneous header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + +#ifndef __CMEM7_MISC_H +#define __CMEM7_MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "cmem7.h" +#include "cmem7_conf.h" + +/** + * @brief NVIC initialization structure + */ +/** +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endcode + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete Capital-micro Devices IRQ Channels list, please + refer to cmem7.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + BOOL NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + + +/** @defgroup NVIC_VectTab + * @{ + */ + +#define NVIC_VectTab_CME_CODE ((uint32_t)0x00000000) +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_CME_CODE) || \ + ((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup NVIC_LP + * @{ + */ +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup NVIC_PriorityGroup + * @{ + */ +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) +/** + * @} + */ + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values, ref as @ref NVIC_PriorityGroup: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values, ref as @ref NVIC_VectTab: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values, ref as @ref NVIC_LP: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState); + +/** + * @brief Memory map from address 'from' to 'address 'to' and open icache or not + * @param[in] from address to be mapped from + * @param[in] to address to be mapped to + * @param[in] isIcacheOn icache is on or off + * @retval None + */ +void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn); + +/** + * @brief Convert the mapping destination address to source address + * @param[in] to address to be mapped to + * @retval uint32_t address to be mapped from + */ +uint32_t GLB_ConvertToMappingFromAddr(uint32_t to); + +/** + * @brief Convert the mapping source address to destination address + * @param[in] from address to be mapped from + * @retval uint32_t address to be mapped to + */ +uint32_t GLB_ConvertToMappingToAddr(uint32_t from); + +/** + * @brief Set NMI irq number, it should be one of @ref IRQn_Type. + * @Note You can assign any valid IRQn_Type to NMI. After that, you will enter NMI + * interrupt routine if the specific 'irq' occurs. By default, NMI irq number + * is 0, same as ETH_INT_IRQn + * @param[in] irq irq number + * @retval None + */ +void GLB_SetNmiIrqNum(uint32_t irq); + +/** @defgroup SYS_CLK_SEL + * @{ + */ +#define SYS_CLK_SEL_OSC 0x0 +#define SYS_CLK_SEL_DLL 0x1 +#define SYS_CLK_SEL_CRYSTAL 0x2 +#define SYS_CLK_SEL_EXTERNAL 0x3 +/** + * @} + */ + +/** + * @brief Select system clock source, it should be one of @ref SYS_CLK_SEL. + * @Note You MUST make sure externel clock has been stabled if clock + * source is external before call this function. + * Default value is SYS_CLK_SEL_OSC + * @param[in] irq irq number + * @retval None + */ +void GLB_SelectSysClkSource(uint8_t source); + +/** + * @brief Simulate instruction 'STRB' or 'STRH' with 'BFI' + * @Note In M7, you have to write a register in 32-bit alignment, + * not in 8-bit or 16-bit. + * @param[in] addr register address to be written + * @param[in] value value to be written + * @param[in] lsb LSB in register to be written + * @param[in] len bit length to be written + * @retval None + */ + + +//#define aaaa(len) __asm("LDR len, 11") + +#define CMEM7_BFI(addr, value, lsb, len) \ + do { \ + unsigned long tmp; \ + unsigned long tmp1 = (unsigned long)addr; \ + \ + __asm("LDR tmp, [tmp1]\n" \ + "BFI tmp, "#value", "#lsb", "#len" \n" \ + "STR tmp, [tmp1]\n"); \ + } while (0) + +#ifdef __cplusplus +} +#endif + +#endif /* __CMEM7_MISC_H */ + diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h index 00d5d74520..885d704ceb 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h @@ -1,89 +1,89 @@ -/**
- *****************************************************************************
- * @file cmem7_rtc.h
- *
- * @brief CMEM7 RTC header file
- *
- *
- * @version V1.0
- * @date 3. September 2013
- *
- * @note
- *
- *****************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
- * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
- *****************************************************************************
- */
-
-#ifndef __CMEM7_RTC_H
-#define __CMEM7_RTC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "cmem7.h"
-#include "cmem7_conf.h"
-
-/** @defgroup RTC_Int
- * @{
- */
-#define RTC_Int_Second ((uint32_t)0x00000001)
-#define RTC_Int_Millsecond ((uint32_t)0x00000002)
-#define RTC_Int_All ((uint32_t)0x00000003)
-#define IS_RTC_INT(INT) (((INT) != 0) && (((INT) & ~RTC_Int_All) == 0))
-/**
- * @}
- */
-
-/**
- * @brief Enable or disable RTC interrupt.
- * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
- * @param[in] Enable The bit indicates if specific interrupts are enable or not
- * @retval None
- */
-void RTC_ITConfig(uint32_t Int, BOOL Enable);
-
-/**
- * @brief Check specific interrupts are set or not
- * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
- * @retval BOOL The bit indicates if specific interrupts are set or not
- */
-BOOL RTC_GetITStatus(uint32_t Int);
-
-/**
- * @brief Clear specific interrupts
- * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
- * @retval None
- */
-void RTC_ClearITPendingBit(uint32_t Int);
-
-/**
- * @brief Get seconds since power up
- * @param None
- * @retval uint32_t Seconds since power up
- */
-uint32_t RTC_GetSecond(void);
-
-/**
- * @brief Get current millseconds
- * @param None
- * @retval uint32_t Current millseconds
- */
-uint16_t RTC_GetMillSecond(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CMEM7_RTC_H */
-
+/** + ***************************************************************************** + * @file cmem7_rtc.h + * + * @brief CMEM7 RTC header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + +#ifndef __CMEM7_RTC_H +#define __CMEM7_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "cmem7.h" +#include "cmem7_conf.h" + +/** @defgroup RTC_Int + * @{ + */ +#define RTC_Int_Second ((uint32_t)0x00000001) +#define RTC_Int_Millsecond ((uint32_t)0x00000002) +#define RTC_Int_All ((uint32_t)0x00000003) +#define IS_RTC_INT(INT) (((INT) != 0) && (((INT) & ~RTC_Int_All) == 0)) +/** + * @} + */ + +/** + * @brief Enable or disable RTC interrupt. + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @retval None + */ +void RTC_ITConfig(uint32_t Int, BOOL Enable); + +/** + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @retval BOOL The bit indicates if specific interrupts are set or not + */ +BOOL RTC_GetITStatus(uint32_t Int); + +/** + * @brief Clear specific interrupts + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @retval None + */ +void RTC_ClearITPendingBit(uint32_t Int); + +/** + * @brief Get seconds since power up + * @param None + * @retval uint32_t Seconds since power up + */ +uint32_t RTC_GetSecond(void); + +/** + * @brief Get current millseconds + * @param None + * @retval uint32_t Current millseconds + */ +uint16_t RTC_GetMillSecond(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __CMEM7_RTC_H */ + diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h index 5abf7ba0d8..78c444c53b 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h @@ -1,110 +1,110 @@ -/**
- *****************************************************************************
- * @file cmem7_wdg.h
- *
- * @brief CMEM7 watchdog header file
- *
- *
- * @version V1.0
- * @date 3. September 2013
- *
- * @note
- *
- *****************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
- * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
- *****************************************************************************
- */
-
-#ifndef __CMEM7_WDG_H
-#define __CMEM7_WDG_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include "cmem7.h"
-#include "cmem7_conf.h"
-
-/** @defgroup WDG_INT
- * @{
- */
-#define WDG_INT_QUARTER 0
-#define WDG_INT_HALF 1
-#define IS_WDG_INT(INT) (((INT) == WDG_INT_QUARTER) || \
- ((INT) == WDG_INT_HALF))
-/**
- * @}
- */
-
-/** @defgroup WDG_TRIGGER_MODE
- * @{
- */
-#define WDG_TRIGGER_MODE_EDGE 0
-#define WDG_TRIGGER_MODE_LEVEL 1
-#define IS_WDG_TRIGGER_MODE(TRI) (((TRI) == WDG_TRIGGER_MODE_EDGE) || \
- ((TRI) == WDG_TRIGGER_MODE_LEVEL))
-/**
- * @}
- */
-
-/**
- * @brief Deinitializes the Watchdog peripheral registers to their default reset values.
- * @param[in] None
- * @retval None
- */
-void WDG_DeInit(void);
-
-/**
- * @brief Watchdog initialization
- * @note This function should be called at first before any other interfaces.
- * @param[in] trigger Watchdog interrupt trigger mode, which is a value of @ref WDG_TRIGGER_MODE
- * @param[in] ResetMillSecond MillSeconds lasts before global reset
- * @retval None
- */
-void WDG_Init(uint8_t trigger, uint16_t ResetMillSecond);
-
-/**
- * @brief Enable or disable watchdog interrupt.
- * @param[in] Int interrupt mask bits, which is a value of @ref WDG_INT
- * @param[in] Enable The bit indicates if the specific interrupt are enable or not
- * @retval None
- */
-void WDG_ITConfig(uint8_t Int, BOOL Enable);
-
-/**
- * @brief Check the specific interrupt are set or not
- * @param None
- * @retval BOOL The bit indicates if the specific interrupt are set or not
- */
-BOOL WDG_GetITStatus(void);
-
-/**
- * @brief Clear the specific interrupt
- * @param None
- * @retval None
- */
-void WDG_ClearITPendingBit(void);
-
-/**
- * @brief Enable or disable watchdog.
- * @param[in] Enable The bit indicates if watchdog is enable or not
- * @retval None
- */
-void WDG_Cmd(BOOL Enable);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CMEM7_WDG_H */
-
+/** + ***************************************************************************** + * @file cmem7_wdg.h + * + * @brief CMEM7 watchdog header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + +#ifndef __CMEM7_WDG_H +#define __CMEM7_WDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "cmem7.h" +#include "cmem7_conf.h" + +/** @defgroup WDG_INT + * @{ + */ +#define WDG_INT_QUARTER 0 +#define WDG_INT_HALF 1 +#define IS_WDG_INT(INT) (((INT) == WDG_INT_QUARTER) || \ + ((INT) == WDG_INT_HALF)) +/** + * @} + */ + +/** @defgroup WDG_TRIGGER_MODE + * @{ + */ +#define WDG_TRIGGER_MODE_EDGE 0 +#define WDG_TRIGGER_MODE_LEVEL 1 +#define IS_WDG_TRIGGER_MODE(TRI) (((TRI) == WDG_TRIGGER_MODE_EDGE) || \ + ((TRI) == WDG_TRIGGER_MODE_LEVEL)) +/** + * @} + */ + +/** + * @brief Deinitializes the Watchdog peripheral registers to their default reset values. + * @param[in] None + * @retval None + */ +void WDG_DeInit(void); + +/** + * @brief Watchdog initialization + * @note This function should be called at first before any other interfaces. + * @param[in] trigger Watchdog interrupt trigger mode, which is a value of @ref WDG_TRIGGER_MODE + * @param[in] ResetMillSecond MillSeconds lasts before global reset + * @retval None + */ +void WDG_Init(uint8_t trigger, uint16_t ResetMillSecond); + +/** + * @brief Enable or disable watchdog interrupt. + * @param[in] Int interrupt mask bits, which is a value of @ref WDG_INT + * @param[in] Enable The bit indicates if the specific interrupt are enable or not + * @retval None + */ +void WDG_ITConfig(uint8_t Int, BOOL Enable); + +/** + * @brief Check the specific interrupt are set or not + * @param None + * @retval BOOL The bit indicates if the specific interrupt are set or not + */ +BOOL WDG_GetITStatus(void); + +/** + * @brief Clear the specific interrupt + * @param None + * @retval None + */ +void WDG_ClearITPendingBit(void); + +/** + * @brief Enable or disable watchdog. + * @param[in] Enable The bit indicates if watchdog is enable or not + * @retval None + */ +void WDG_Cmd(BOOL Enable); + + +#ifdef __cplusplus +} +#endif + +#endif /* __CMEM7_WDG_H */ + diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c index db9adf0763..8fc764abf6 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c @@ -108,7 +108,8 @@ static uint8_t flash_ReadInnerStatusHigh() { return (uint8_t)NOR_FLASH->DATA; } -static void flash_WaitInWritting() { +//static void flash_WaitInWritting() { +void flash_WaitInWritting(void) { FLASH_INNER_STATUS s; while (NOR_FLASH->STATUS_b.BUSY); @@ -173,7 +174,8 @@ static void flash_RwReq(uint8_t cmd, uint32_t addr, uint16_t size) { NOR_FLASH->TRIGGER_b.OP_START = TRUE; } -static void flash_WaitReadFifoNotEmpty() { +//static void flash_WaitReadFifoNotEmpty() { +void flash_WaitReadFifoNotEmpty(void) { while (NOR_FLASH->STATUS_b.RD_FIFO_EMPTY) { if (wait) { (*wait)(); @@ -181,7 +183,8 @@ static void flash_WaitReadFifoNotEmpty() { } } -static uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) { +//static uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) { +uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) { uint16_t count = 0; while (!NOR_FLASH->STATUS_b.RD_FIFO_EMPTY && size != 0) { diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c index f49e727862..785c8a0767 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c @@ -179,3 +179,78 @@ void GPIO_EnablePwm(uint8_t Channel, BOOL Enable) { } } +/** + xjf 20150324 + +**/ +void GPIO_SetBits(uint32_t mask) +{ + static uint32_t g_GPIO_OUT_UNMASK; + static uint32_t g_GPIO_OUT_DATA; + static uint32_t g_GPIO_OE; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + g_GPIO_OUT_DATA = GPIO->GPIO_OUT_DATA ; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK |=mask; + g_GPIO_OE |=mask; + g_GPIO_OUT_DATA |=mask; + + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + GPIO->GPIO_OUT_DATA =g_GPIO_OUT_DATA ; + GPIO->GPIO_OE =g_GPIO_OE ; +} + +void GPIO_clrBits(uint32_t mask) +{ + static uint32_t g_GPIO_OUT_UNMASK; + static uint32_t g_GPIO_OUT_DATA; + static uint32_t g_GPIO_OE; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + g_GPIO_OUT_DATA = GPIO->GPIO_OUT_DATA ; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK |=mask; + g_GPIO_OE |=mask; + g_GPIO_OUT_DATA &=(~ mask); + + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + GPIO->GPIO_OUT_DATA =g_GPIO_OUT_DATA ; + GPIO->GPIO_OE =g_GPIO_OE ; +} + +uint32_t GPIO_getBits(uint32_t mask) +{ + static uint32_t g_GPIO_OUT_UNMASK; + //static uint32_t g_GPIO_OUT_DATA; + static uint32_t g_GPIO_OE; + + uint32_t get_delay = 0; + uint32_t saved_mask; + + saved_mask=mask; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK &=(~mask); + g_GPIO_OE &=(~mask); + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + GPIO->GPIO_OE =g_GPIO_OE ; + for(get_delay=0;get_delay<100;get_delay++) + { + } + //get_delay=(GPIO->GPIO_IN)&saved_mask; + if(((GPIO->GPIO_IN)&saved_mask)==saved_mask) + { + return(1); + } + else + { + return(0); + } + +} +/** + xjf 20150324 + +**/ diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c index fd88e6769c..9f4151fa85 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c @@ -92,8 +92,20 @@ void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState) } } +#define DEF_IBUS_OFFSET 0x1FFE0000 +#define DEF_EXT_ADDR 0x08020000 +static BOOL isMappingOn() { + /* If default values aren't changed */ + if ((GLOBAL_CTRL->IBUSOFF == DEF_IBUS_OFFSET) && + (GLOBAL_CTRL->EXTADDR == DEF_EXT_ADDR)) { + return FALSE; + } + + return TRUE; +} + void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn) { - int n; + volatile int n; GLOBAL_CTRL->IBUSOFF = GLOBAL_CTRL->DBUSOFF = (from - to); GLOBAL_CTRL->EXTADDR = to; @@ -104,6 +116,38 @@ void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn) { for (n = 0; n < 100; n++); } +/* + * ------------------------------------------------------------------ + * | 0 - 0x20000 | --> 0x20000000 | -> 0x40000000 | -> 0xFFFFFFFF | + * | code SRAM | map to region | data SRAM | map from region | + * ------------------------------------------------------------------ + */ +#define MAPPING_FROM_REGION_START 0x40000000 +#define MAPPING_TO_REGION_END 0x20000000 +uint32_t GLB_ConvertToMappingFromAddr(uint32_t to) { + if (!isMappingOn()) { + return to; + } + + if ((to > MAPPING_TO_REGION_END) || (to < GLOBAL_CTRL->EXTADDR)) { + return to; + } + + return (to + GLOBAL_CTRL->IBUSOFF); +} + +uint32_t GLB_ConvertToMappingToAddr(uint32_t from) { + if (!isMappingOn()) { + return from; + } + + if (from < MAPPING_FROM_REGION_START) { + return from; + } + + return (from - GLOBAL_CTRL->IBUSOFF); +} + void GLB_SetNmiIrqNum(uint32_t irq) { GLOBAL_CTRL->NMI_SEL_b.NMI = irq; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c index d107e0cb8d..aec1580ad9 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c @@ -28,7 +28,7 @@ #define SECONDS_IN_A_DAY (86400) -void RTC_EnableInt(uint32_t Int, BOOL Enable) { +void RTC_ITConfig(uint32_t Int, BOOL Enable) { assert_param(IS_RTC_INT(Int)); if (Enable) { @@ -38,7 +38,7 @@ void RTC_EnableInt(uint32_t Int, BOOL Enable) { } } -BOOL RTC_GetIntStatus(uint32_t Int) { +BOOL RTC_GetITStatus(uint32_t Int) { assert_param(IS_RTC_INT(Int)); if (0 != (RTC->INT_STATUS & Int)) { @@ -48,7 +48,7 @@ BOOL RTC_GetIntStatus(uint32_t Int) { return FALSE; } -void RTC_ClearInt(uint32_t Int) { +void RTC_ClearITPendingBit(uint32_t Int) { assert_param(IS_RTC_INT(Int)); RTC->INT_STATUS = Int; @@ -58,6 +58,6 @@ uint32_t RTC_GetSecond() { return RTC->SECOND; } -uint16_t RTC_GetMicroSecond() { - return RTC->MICROSECOND_b.MS; +uint16_t RTC_GetMillSecond() { + return RTC->MILLSECOND_b.MS; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c index 6518d81225..8ac809caf9 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c @@ -30,29 +30,34 @@ static uint32_t wdg_GetClock() { return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.WDG_CLK + 1)); } -void WDG_Init(uint8_t trigger, uint16_t ResetMicroSecond) { +void WDG_DeInit(void){ + SOFT_RESET->SOFTRST_b.WDT_n = 0; + SOFT_RESET->SOFTRST_b.WDT_n = 1; +} + +void WDG_Init(uint8_t trigger, uint16_t ResetMillSecond) { assert_param(IS_WDG_TRIGGER_MODE(trigger)); WDG->INT_CTRL_b.TRIGGER_MODE = trigger; - WDG->LEN = ((uint64_t)wdg_GetClock()) * ResetMicroSecond / 1000; + WDG->LEN = ((uint64_t)wdg_GetClock()) * ResetMillSecond / 1000; } -void WDG_EnableInt(uint8_t Int, BOOL Enable) { +void WDG_ITConfig(uint8_t Int, BOOL Enable) { assert_param(IS_WDG_INT(Int)); WDG->CTRL_b.INT_LEN = Int; WDG->INT_CTRL_b.MASK = !Enable; } -BOOL WDG_GetIntStatus() { +BOOL WDG_GetITStatus() { return (WDG->INT_STA_b.STA == 1) ? TRUE : FALSE; } -void WDG_ClearInt() { +void WDG_ClearITPendingBit() { WDG->INT_STA_b.STA = 1; } -void WDG_Enable(BOOL Enable) { +void WDG_Cmd(BOOL Enable) { WDG->CTRL_b.EN = Enable; } diff --git a/bsp/CME_M7/drivers/emac.c b/bsp/CME_M7/drivers/emac.c index 3de53142b9..a8837d44ce 100644 --- a/bsp/CME_M7/drivers/emac.c +++ b/bsp/CME_M7/drivers/emac.c @@ -205,14 +205,14 @@ static rt_err_t rt_cme_eth_init(rt_device_t dev) RxDescChainInit(); TxDescChainInit(); - ETH_EnableInt(ETH_INT_BUS_FATAL_ERROR, TRUE); + ETH_ITConfig(ETH_INT_BUS_FATAL_ERROR, TRUE); - ETH_EnableInt(ETH_INT_RX_COMPLETE_FRAME, TRUE); - ETH_EnableInt(ETH_INT_RX_BUF_UNAVAI, TRUE); - ETH_EnableInt(ETH_INT_RX_STOP, TRUE); + ETH_ITConfig(ETH_INT_RX_COMPLETE_FRAME, TRUE); + ETH_ITConfig(ETH_INT_RX_BUF_UNAVAI, TRUE); + ETH_ITConfig(ETH_INT_RX_STOP, TRUE); ETH_StartRx(); - ETH_EnableInt(ETH_INT_TX_COMPLETE_FRAME, TRUE); + ETH_ITConfig(ETH_INT_TX_COMPLETE_FRAME, TRUE); ETH_StartTx(); return RT_EOK; @@ -318,8 +318,8 @@ struct pbuf *rt_cme_eth_rx(rt_device_t dev) desc = ETH_AcquireFreeRxDesc(); if(desc == RT_NULL) { - ETH_EnableInt(ETH_INT_RX_COMPLETE_FRAME, TRUE); - ETH_EnableInt(ETH_INT_RX_BUF_UNAVAI, TRUE); + ETH_ITConfig(ETH_INT_RX_COMPLETE_FRAME, TRUE); + ETH_ITConfig(ETH_INT_RX_BUF_UNAVAI, TRUE); ETH_ResumeRx(); goto _exit; } @@ -414,28 +414,28 @@ void ETH_IRQHandler(void) /* enter interrupt */ rt_interrupt_enter(); - if (ETH_GetIntStatus(ETH_INT_TX_COMPLETE_FRAME)) + if (ETH_GetITStatus(ETH_INT_TX_COMPLETE_FRAME)) { rt_sem_release(&cme_eth_device.tx_buf_free); - ETH_ClearInt(ETH_INT_TX_COMPLETE_FRAME); + ETH_ClearITPendingBit(ETH_INT_TX_COMPLETE_FRAME); } - if (ETH_GetIntStatus(ETH_INT_RX_STOP)) + if (ETH_GetITStatus(ETH_INT_RX_STOP)) { CME_ETH_PRINTF("ETH_INT_RX_STOP\n"); - ETH_ClearInt(ETH_INT_RX_STOP); + ETH_ClearITPendingBit(ETH_INT_RX_STOP); } - if ((ETH_GetIntStatus(ETH_INT_RX_BUF_UNAVAI)) || - (ETH_GetIntStatus(ETH_INT_RX_COMPLETE_FRAME))) + if ((ETH_GetITStatus(ETH_INT_RX_BUF_UNAVAI)) || + (ETH_GetITStatus(ETH_INT_RX_COMPLETE_FRAME))) { /* a frame has been received */ eth_device_ready(&(cme_eth_device.parent)); - ETH_EnableInt(ETH_INT_RX_COMPLETE_FRAME, FALSE); - ETH_EnableInt(ETH_INT_RX_BUF_UNAVAI, FALSE); - ETH_ClearInt(ETH_INT_RX_BUF_UNAVAI); - ETH_ClearInt(ETH_INT_RX_COMPLETE_FRAME); + ETH_ITConfig(ETH_INT_RX_COMPLETE_FRAME, FALSE); + ETH_ITConfig(ETH_INT_RX_BUF_UNAVAI, FALSE); + ETH_ClearITPendingBit(ETH_INT_RX_BUF_UNAVAI); + ETH_ClearITPendingBit(ETH_INT_RX_COMPLETE_FRAME); } /* leave interrupt */ diff --git a/bsp/CME_M7/project.uvopt b/bsp/CME_M7/project.uvopt index 21805b8fa9..b1d469cb6d 100644 --- a/bsp/CME_M7/project.uvopt +++ b/bsp/CME_M7/project.uvopt @@ -76,6 +76,16 @@ <IsCurrentTarget>1</IsCurrentTarget> </OPTFL> <CpuCode>0</CpuCode> + <DllOpt> + <SimDllName>SARMCM3.DLL</SimDllName> + <SimDllArguments> </SimDllArguments> + <SimDlgDllName>DCM.DLL</SimDlgDllName> + <SimDlgDllArguments>-pCM3</SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments></TargetDllArguments> + <TargetDlgDllName>TCM.DLL</TargetDlgDllName> + <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments> + </DllOpt> <DebugOpt> <uSim>0</uSim> <uTrg>1</uTrg> @@ -93,13 +103,9 @@ <tRmem>1</tRmem> <tRfunc>0</tRfunc> <tRbox>1</tRbox> - <tRtrace>1</tRtrace> - <sRSysVw>1</sRSysVw> - <tRSysVw>1</tRSysVw> - <tPdscDbg>1</tPdscDbg> <sRunDeb>0</sRunDeb> <sLrtime>0</sLrtime> - <nTsel>17</nTsel> + <nTsel>15</nTsel> <sDll></sDll> <sDllPa></sDllPa> <sDlgDll></sDlgDll> @@ -125,9 +131,6 @@ </SetRegEntry> </TargetDriverDllRegistry> <Breakpoint/> - <Tracepoint> - <THDelay>0</THDelay> - </Tracepoint> <DebugFlag> <trace>0</trace> <periodic>1</periodic> @@ -160,11 +163,1515 @@ </Target> <Group> - <GroupName>Source Group 1</GroupName> + <GroupName>StdPeriph_Driver</GroupName> <tvExp>0</tvExp> <tvExpOptDlg>0</tvExpOptDlg> <cbSel>0</cbSel> - <RteFlg>0</RteFlg> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>1</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_adc.c</PathWithFileName> + <FilenameWithoutPath>cmem7_adc.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>2</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_aes.c</PathWithFileName> + <FilenameWithoutPath>cmem7_aes.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>3</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_can.c</PathWithFileName> + <FilenameWithoutPath>cmem7_can.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>4</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_ddr.c</PathWithFileName> + <FilenameWithoutPath>cmem7_ddr.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>5</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_dma.c</PathWithFileName> + <FilenameWithoutPath>cmem7_dma.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>6</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_efuse.c</PathWithFileName> + <FilenameWithoutPath>cmem7_efuse.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>7</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_eth.c</PathWithFileName> + <FilenameWithoutPath>cmem7_eth.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>8</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_flash.c</PathWithFileName> + <FilenameWithoutPath>cmem7_flash.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>9</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_gpio.c</PathWithFileName> + <FilenameWithoutPath>cmem7_gpio.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>10</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_i2c.c</PathWithFileName> + <FilenameWithoutPath>cmem7_i2c.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>11</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_misc.c</PathWithFileName> + <FilenameWithoutPath>cmem7_misc.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>12</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_rtc.c</PathWithFileName> + <FilenameWithoutPath>cmem7_rtc.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>13</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_spi.c</PathWithFileName> + <FilenameWithoutPath>cmem7_spi.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>14</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_tim.c</PathWithFileName> + <FilenameWithoutPath>cmem7_tim.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>15</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_uart.c</PathWithFileName> + <FilenameWithoutPath>cmem7_uart.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>16</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_usb.c</PathWithFileName> + <FilenameWithoutPath>cmem7_usb.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>1</GroupNumber> + <FileNumber>17</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>StdPeriph_Driver/src/cmem7_wdg.c</PathWithFileName> + <FilenameWithoutPath>cmem7_wdg.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>Applications</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>2</GroupNumber> + <FileNumber>18</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>applications/application.c</PathWithFileName> + <FilenameWithoutPath>application.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>2</GroupNumber> + <FileNumber>19</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>applications/led.c</PathWithFileName> + <FilenameWithoutPath>led.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>2</GroupNumber> + <FileNumber>20</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>applications/startup.c</PathWithFileName> + <FilenameWithoutPath>startup.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>Drivers</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>3</GroupNumber> + <FileNumber>21</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>drivers/board.c</PathWithFileName> + <FilenameWithoutPath>board.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>3</GroupNumber> + <FileNumber>22</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>drivers/uart.c</PathWithFileName> + <FilenameWithoutPath>uart.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>3</GroupNumber> + <FileNumber>23</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>drivers/emac.c</PathWithFileName> + <FilenameWithoutPath>emac.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>3</GroupNumber> + <FileNumber>24</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>drivers/app_phy.c</PathWithFileName> + <FilenameWithoutPath>app_phy.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>CMSIS</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>4</GroupNumber> + <FileNumber>25</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>CMSIS/CME_M7/system_cmem7.c</PathWithFileName> + <FilenameWithoutPath>system_cmem7.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>4</GroupNumber> + <FileNumber>26</FileNumber> + <FileType>2</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>CMSIS/CME_M7/startup/arm/startup_cmem7.s</PathWithFileName> + <FilenameWithoutPath>startup_cmem7.s</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>Kernel</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>27</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/clock.c</PathWithFileName> + <FilenameWithoutPath>clock.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>28</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/components.c</PathWithFileName> + <FilenameWithoutPath>components.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>29</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/device.c</PathWithFileName> + <FilenameWithoutPath>device.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>30</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/idle.c</PathWithFileName> + <FilenameWithoutPath>idle.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>31</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/ipc.c</PathWithFileName> + <FilenameWithoutPath>ipc.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>32</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/irq.c</PathWithFileName> + <FilenameWithoutPath>irq.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>33</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/kservice.c</PathWithFileName> + <FilenameWithoutPath>kservice.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>34</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/mem.c</PathWithFileName> + <FilenameWithoutPath>mem.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>35</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/mempool.c</PathWithFileName> + <FilenameWithoutPath>mempool.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>36</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/object.c</PathWithFileName> + <FilenameWithoutPath>object.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>37</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/scheduler.c</PathWithFileName> + <FilenameWithoutPath>scheduler.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>38</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/thread.c</PathWithFileName> + <FilenameWithoutPath>thread.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>5</GroupNumber> + <FileNumber>39</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../src/timer.c</PathWithFileName> + <FilenameWithoutPath>timer.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>CORTEX-M3</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>6</GroupNumber> + <FileNumber>40</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../libcpu/arm/cortex-m3/cpuport.c</PathWithFileName> + <FilenameWithoutPath>cpuport.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>6</GroupNumber> + <FileNumber>41</FileNumber> + <FileType>2</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../libcpu/arm/cortex-m3/context_rvds.S</PathWithFileName> + <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath> + </File> + <File> + <GroupNumber>6</GroupNumber> + <FileNumber>42</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../libcpu/arm/common/backtrace.c</PathWithFileName> + <FilenameWithoutPath>backtrace.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>6</GroupNumber> + <FileNumber>43</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../libcpu/arm/common/div0.c</PathWithFileName> + <FilenameWithoutPath>div0.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>6</GroupNumber> + <FileNumber>44</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../libcpu/arm/common/showmem.c</PathWithFileName> + <FilenameWithoutPath>showmem.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>libc</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>7</GroupNumber> + <FileNumber>45</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/libc/armlibc/mem_std.c</PathWithFileName> + <FilenameWithoutPath>mem_std.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>7</GroupNumber> + <FileNumber>46</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/libc/armlibc/stubs.c</PathWithFileName> + <FilenameWithoutPath>stubs.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>DeviceDrivers</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>47</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/serial/serial.c</PathWithFileName> + <FilenameWithoutPath>serial.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>48</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/completion.c</PathWithFileName> + <FilenameWithoutPath>completion.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>49</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/dataqueue.c</PathWithFileName> + <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>50</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/pipe.c</PathWithFileName> + <FilenameWithoutPath>pipe.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>51</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/portal.c</PathWithFileName> + <FilenameWithoutPath>portal.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>52</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/ringbuffer.c</PathWithFileName> + <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>8</GroupNumber> + <FileNumber>53</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/drivers/src/workqueue.c</PathWithFileName> + <FilenameWithoutPath>workqueue.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>finsh</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>54</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/shell.c</PathWithFileName> + <FilenameWithoutPath>shell.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>55</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/symbol.c</PathWithFileName> + <FilenameWithoutPath>symbol.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>56</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/cmd.c</PathWithFileName> + <FilenameWithoutPath>cmd.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>57</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/msh_cmd.c</PathWithFileName> + <FilenameWithoutPath>msh_cmd.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>58</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/msh.c</PathWithFileName> + <FilenameWithoutPath>msh.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>59</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_compiler.c</PathWithFileName> + <FilenameWithoutPath>finsh_compiler.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>60</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_error.c</PathWithFileName> + <FilenameWithoutPath>finsh_error.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>61</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_heap.c</PathWithFileName> + <FilenameWithoutPath>finsh_heap.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>62</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_init.c</PathWithFileName> + <FilenameWithoutPath>finsh_init.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>63</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_node.c</PathWithFileName> + <FilenameWithoutPath>finsh_node.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>64</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_ops.c</PathWithFileName> + <FilenameWithoutPath>finsh_ops.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>65</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_parser.c</PathWithFileName> + <FilenameWithoutPath>finsh_parser.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>66</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_var.c</PathWithFileName> + <FilenameWithoutPath>finsh_var.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>67</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_vm.c</PathWithFileName> + <FilenameWithoutPath>finsh_vm.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>9</GroupNumber> + <FileNumber>68</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/finsh/finsh_token.c</PathWithFileName> + <FilenameWithoutPath>finsh_token.c</FilenameWithoutPath> + </File> + </Group> + + <Group> + <GroupName>LwIP</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>69</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/api_lib.c</PathWithFileName> + <FilenameWithoutPath>api_lib.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>70</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/api_msg.c</PathWithFileName> + <FilenameWithoutPath>api_msg.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>71</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/err.c</PathWithFileName> + <FilenameWithoutPath>err.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>72</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/netbuf.c</PathWithFileName> + <FilenameWithoutPath>netbuf.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>73</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/netdb.c</PathWithFileName> + <FilenameWithoutPath>netdb.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>74</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/netifapi.c</PathWithFileName> + <FilenameWithoutPath>netifapi.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>75</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/sockets.c</PathWithFileName> + <FilenameWithoutPath>sockets.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>76</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/api/tcpip.c</PathWithFileName> + <FilenameWithoutPath>tcpip.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>77</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/arch/sys_arch.c</PathWithFileName> + <FilenameWithoutPath>sys_arch.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>78</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/def.c</PathWithFileName> + <FilenameWithoutPath>def.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>79</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/dhcp.c</PathWithFileName> + <FilenameWithoutPath>dhcp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>80</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/dns.c</PathWithFileName> + <FilenameWithoutPath>dns.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>81</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/init.c</PathWithFileName> + <FilenameWithoutPath>init.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>82</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/memp.c</PathWithFileName> + <FilenameWithoutPath>memp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>83</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/netif.c</PathWithFileName> + <FilenameWithoutPath>netif.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>84</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/pbuf.c</PathWithFileName> + <FilenameWithoutPath>pbuf.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>85</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/raw.c</PathWithFileName> + <FilenameWithoutPath>raw.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>86</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/stats.c</PathWithFileName> + <FilenameWithoutPath>stats.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>87</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/sys.c</PathWithFileName> + <FilenameWithoutPath>sys.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>88</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/tcp.c</PathWithFileName> + <FilenameWithoutPath>tcp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>89</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/tcp_in.c</PathWithFileName> + <FilenameWithoutPath>tcp_in.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>90</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/tcp_out.c</PathWithFileName> + <FilenameWithoutPath>tcp_out.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>91</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/timers.c</PathWithFileName> + <FilenameWithoutPath>timers.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>92</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/udp.c</PathWithFileName> + <FilenameWithoutPath>udp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>93</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/autoip.c</PathWithFileName> + <FilenameWithoutPath>autoip.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>94</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/icmp.c</PathWithFileName> + <FilenameWithoutPath>icmp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>95</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/igmp.c</PathWithFileName> + <FilenameWithoutPath>igmp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>96</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/inet.c</PathWithFileName> + <FilenameWithoutPath>inet.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>97</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/inet_chksum.c</PathWithFileName> + <FilenameWithoutPath>inet_chksum.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>98</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/ip.c</PathWithFileName> + <FilenameWithoutPath>ip.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>99</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/ip_addr.c</PathWithFileName> + <FilenameWithoutPath>ip_addr.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>100</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/core/ipv4/ip_frag.c</PathWithFileName> + <FilenameWithoutPath>ip_frag.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>101</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/netif/etharp.c</PathWithFileName> + <FilenameWithoutPath>etharp.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>102</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/netif/ethernetif.c</PathWithFileName> + <FilenameWithoutPath>ethernetif.c</FilenameWithoutPath> + </File> + <File> + <GroupNumber>10</GroupNumber> + <FileNumber>103</FileNumber> + <FileType>1</FileType> + <tvExp>0</tvExp> + <Focus>0</Focus> + <ColumnNumber>0</ColumnNumber> + <tvExpOptDlg>0</tvExpOptDlg> + <TopLine>0</TopLine> + <CurrentLine>0</CurrentLine> + <bDave2>0</bDave2> + <PathWithFileName>../../components/net/lwip-1.4.1/src/netif/slipif.c</PathWithFileName> + <FilenameWithoutPath>slipif.c</FilenameWithoutPath> + </File> </Group> </ProjectOpt> diff --git a/bsp/CME_M7/project.uvproj b/bsp/CME_M7/project.uvproj index 9a1283bdcc..44f7d87d47 100644 --- a/bsp/CME_M7/project.uvproj +++ b/bsp/CME_M7/project.uvproj @@ -1,7 +1,10 @@ <?xml version="1.0" encoding="UTF-8" standalone="no" ?> <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + <SchemaVersion>1.1</SchemaVersion> + <Header>### uVision Project, (C) Keil Software</Header> + <Targets> <Target> <TargetName>rtthread</TargetName> @@ -11,31 +14,28 @@ <TargetCommonOption> <Device>ARMCM3</Device> <Vendor>ARM</Vendor> - <PackID>ARM.CMSIS.4.1.0</PackID> - <PackURL>http://www.keil.com/pack/</PackURL> <Cpu>CPUTYPE("Cortex-M3") CLOCK(10000000) ESEL ELITTLE</Cpu> - <FlashUtilSpec /> - <StartupFile /> - <FlashDriverDll /> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> <DeviceId>0</DeviceId> <RegisterFile>$$Device:ARMCM3$Device\ARM\ARMCM3\Include\ARMCM3.h</RegisterFile> - <MemoryEnv /> - <Cmp /> - <Asm /> - <Linker /> - <OHString /> - <InfinionOptionDll /> - <SLE66CMisc /> - <SLE66AMisc /> - <SLE66LinkerMisc /> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> <SFDFile>$$Device:ARMCM3$Device\ARM\SVD\ARMCM3.svd</SFDFile> - <bCustSvd>0</bCustSvd> <UseEnv>0</UseEnv> - <BinPath /> - <IncludePath /> - <LibPath /> - <RegisterFilePath /> - <DBRegisterFilePath /> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> <TargetStatus> <Error>0</Error> <ExitCodeStop>0</ExitCodeStop> @@ -57,8 +57,8 @@ <BeforeCompile> <RunUserProg1>0</RunUserProg1> <RunUserProg2>0</RunUserProg2> - <UserProg1Name /> - <UserProg2Name /> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> <nStopU1X>0</nStopU1X> @@ -67,23 +67,21 @@ <BeforeMake> <RunUserProg1>0</RunUserProg1> <RunUserProg2>0</RunUserProg2> - <UserProg1Name /> - <UserProg2Name /> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> - <nStopB1X>0</nStopB1X> - <nStopB2X>0</nStopB2X> </BeforeMake> <AfterMake> <RunUserProg1>0</RunUserProg1> <RunUserProg2>0</RunUserProg2> <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> - <UserProg2Name /> + <UserProg2Name></UserProg2Name> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> </AfterMake> <SelectedForBatchBuild>0</SelectedForBatchBuild> - <SVCSIdString /> + <SVCSIdString></SVCSIdString> </TargetCommonOption> <CommonProperty> <UseCPPCompiler>0</UseCPPCompiler> @@ -97,9 +95,8 @@ <AssembleAssemblyFile>0</AssembleAssemblyFile> <PublicsOnly>0</PublicsOnly> <StopOnExitCode>3</StopOnExitCode> - <CustomArgument /> - <IncludeLibraryModules /> - <ComprImg>1</ComprImg> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> </CommonProperty> <DllOption> <SimDllName>SARMCM3.DLL</SimDllName> @@ -107,7 +104,7 @@ <SimDlgDll>DCM.DLL</SimDlgDll> <SimDlgDllArguments>-pCM3</SimDlgDllArguments> <TargetDllName>SARMCM3.DLL</TargetDllName> - <TargetDllArguments /> + <TargetDllArguments></TargetDllArguments> <TargetDlgDll>TCM.DLL</TargetDlgDll> <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments> </DllOption> @@ -129,7 +126,6 @@ <RestoreFunctions>1</RestoreFunctions> <RestoreToolbox>1</RestoreToolbox> <LimitSpeedToRealTime>0</LimitSpeedToRealTime> - <RestoreSysVw>1</RestoreSysVw> </Simulator> <Target> <UseTarget>1</UseTarget> @@ -140,25 +136,22 @@ <RestoreMemoryDisplay>1</RestoreMemoryDisplay> <RestoreFunctions>0</RestoreFunctions> <RestoreToolbox>1</RestoreToolbox> - <RestoreTracepoints>1</RestoreTracepoints> - <RestoreSysVw>1</RestoreSysVw> - <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> <RunDebugAfterBuild>0</RunDebugAfterBuild> - <TargetSelection>17</TargetSelection> + <TargetSelection>15</TargetSelection> <SimDlls> - <CpuDll /> - <CpuDllArguments /> - <PeripheralDll /> - <PeripheralDllArguments /> - <InitializationFile /> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> </SimDlls> <TargetDlls> - <CpuDll /> - <CpuDllArguments /> - <PeripheralDll /> - <PeripheralDllArguments /> - <InitializationFile /> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> <Driver>CapitalMicro\BIN\cmagdi.dll</Driver> </TargetDlls> </DebugOption> @@ -171,14 +164,9 @@ <Capability>1</Capability> <DriverSelection>4097</DriverSelection> </Flash1> - <bUseTDR>0</bUseTDR> <Flash2>BIN\UL2CM3.DLL</Flash2> <Flash3>"" ()</Flash3> - <Flash4 /> - <pFcarmOut /> - <pFcarmGrp /> - <pFcArmRoot /> - <FcArmLst>0</FcArmLst> + <Flash4></Flash4> </Utilities> <TargetArmAds> <ArmAdsMisc> @@ -210,7 +198,7 @@ <RvctClst>0</RvctClst> <GenPPlst>0</GenPPlst> <AdsCpuType>"Cortex-M3"</AdsCpuType> - <RvctDeviceName /> + <RvctDeviceName></RvctDeviceName> <mOS>0</mOS> <uocRom>0</uocRom> <uocRam>0</uocRam> @@ -341,7 +329,7 @@ <Size>0x0</Size> </OCR_RVCT10> </OnChipMemories> - <RvctStartVector /> + <RvctStartVector></RvctStartVector> </ArmAdsMisc> <Cads> <interw>1</interw> @@ -357,12 +345,10 @@ <wLevel>2</wLevel> <uThumb>0</uThumb> <uSurpInc>0</uSurpInc> - <uC99>0</uC99> - <useXO>0</useXO> <VariousControls> - <MiscControls /> + <MiscControls></MiscControls> <Define>RT_USING_ARM_LIBC</Define> - <Undefine /> + <Undefine></Undefine> <IncludePath>StdPeriph_Driver/inc;applications;.;drivers;CMSIS/CME_M7;../../components/CMSIS/Include;../../include;../../libcpu/arm/cortex-m3;../../libcpu/arm/common;../../components/libc/armlibc;../../components/drivers/include;../../components/drivers/include;../../components/finsh;../../components/net/lwip-1.4.1/src;../../components/net/lwip-1.4.1/src/include;../../components/net/lwip-1.4.1/src/include/ipv4;../../components/net/lwip-1.4.1/src/arch/include;../../components/net/lwip-1.4.1/src/include/netif</IncludePath> </VariousControls> </Cads> @@ -375,12 +361,11 @@ <SwStkChk>0</SwStkChk> <NoWarn>0</NoWarn> <uSurpInc>0</uSurpInc> - <useXO>0</useXO> <VariousControls> - <MiscControls /> - <Define /> - <Undefine /> - <IncludePath /> + <MiscControls></MiscControls> + <Define></Define> + <Undefine></Undefine> + <IncludePath></IncludePath> </VariousControls> </Aads> <LDads> @@ -392,13 +377,12 @@ <useFile>0</useFile> <TextAddressRange>0x00000000</TextAddressRange> <DataAddressRange>0x00000000</DataAddressRange> - <pXoBase /> <ScatterFile>CME_M7.sct</ScatterFile> - <IncludeLibs /> - <IncludeLibsPath /> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> <Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab) --keep *.o(VSymTab) </Misc> - <LinkerInputFile /> - <DisabledWarnings /> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> </LDads> </TargetArmAds> </TargetOption> @@ -411,113 +395,81 @@ <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_adc.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_aes.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_aes.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_can.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_can.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_ddr.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_ddr.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_dma.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_dma.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_efuse.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_efuse.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_eth.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_eth.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_flash.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_flash.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_gpio.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_gpio.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_i2c.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_i2c.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_misc.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_misc.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_rtc.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_rtc.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_spi.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_spi.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_tim.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_tim.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_uart.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_uart.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_usb.c</FileName> <FileType>1</FileType> <FilePath>StdPeriph_Driver/src/cmem7_usb.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmem7_wdg.c</FileName> <FileType>1</FileType> @@ -533,15 +485,11 @@ <FileType>1</FileType> <FilePath>applications/application.c</FilePath> </File> - </Files> - <Files> <File> <FileName>led.c</FileName> <FileType>1</FileType> <FilePath>applications/led.c</FilePath> </File> - </Files> - <Files> <File> <FileName>startup.c</FileName> <FileType>1</FileType> @@ -557,22 +505,16 @@ <FileType>1</FileType> <FilePath>drivers/board.c</FilePath> </File> - </Files> - <Files> <File> <FileName>uart.c</FileName> <FileType>1</FileType> <FilePath>drivers/uart.c</FilePath> </File> - </Files> - <Files> <File> <FileName>emac.c</FileName> <FileType>1</FileType> <FilePath>drivers/emac.c</FilePath> </File> - </Files> - <Files> <File> <FileName>app_phy.c</FileName> <FileType>1</FileType> @@ -588,8 +530,6 @@ <FileType>1</FileType> <FilePath>CMSIS/CME_M7/system_cmem7.c</FilePath> </File> - </Files> - <Files> <File> <FileName>startup_cmem7.s</FileName> <FileType>2</FileType> @@ -605,85 +545,61 @@ <FileType>1</FileType> <FilePath>../../src/clock.c</FilePath> </File> - </Files> - <Files> <File> <FileName>components.c</FileName> <FileType>1</FileType> <FilePath>../../src/components.c</FilePath> </File> - </Files> - <Files> <File> <FileName>device.c</FileName> <FileType>1</FileType> <FilePath>../../src/device.c</FilePath> </File> - </Files> - <Files> <File> <FileName>idle.c</FileName> <FileType>1</FileType> <FilePath>../../src/idle.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ipc.c</FileName> <FileType>1</FileType> <FilePath>../../src/ipc.c</FilePath> </File> - </Files> - <Files> <File> <FileName>irq.c</FileName> <FileType>1</FileType> <FilePath>../../src/irq.c</FilePath> </File> - </Files> - <Files> <File> <FileName>kservice.c</FileName> <FileType>1</FileType> <FilePath>../../src/kservice.c</FilePath> </File> - </Files> - <Files> <File> <FileName>mem.c</FileName> <FileType>1</FileType> <FilePath>../../src/mem.c</FilePath> </File> - </Files> - <Files> <File> <FileName>mempool.c</FileName> <FileType>1</FileType> <FilePath>../../src/mempool.c</FilePath> </File> - </Files> - <Files> <File> <FileName>object.c</FileName> <FileType>1</FileType> <FilePath>../../src/object.c</FilePath> </File> - </Files> - <Files> <File> <FileName>scheduler.c</FileName> <FileType>1</FileType> <FilePath>../../src/scheduler.c</FilePath> </File> - </Files> - <Files> <File> <FileName>thread.c</FileName> <FileType>1</FileType> <FilePath>../../src/thread.c</FilePath> </File> - </Files> - <Files> <File> <FileName>timer.c</FileName> <FileType>1</FileType> @@ -699,29 +615,21 @@ <FileType>1</FileType> <FilePath>../../libcpu/arm/cortex-m3/cpuport.c</FilePath> </File> - </Files> - <Files> <File> <FileName>context_rvds.S</FileName> <FileType>2</FileType> <FilePath>../../libcpu/arm/cortex-m3/context_rvds.S</FilePath> </File> - </Files> - <Files> <File> <FileName>backtrace.c</FileName> <FileType>1</FileType> <FilePath>../../libcpu/arm/common/backtrace.c</FilePath> </File> - </Files> - <Files> <File> <FileName>div0.c</FileName> <FileType>1</FileType> <FilePath>../../libcpu/arm/common/div0.c</FilePath> </File> - </Files> - <Files> <File> <FileName>showmem.c</FileName> <FileType>1</FileType> @@ -737,8 +645,6 @@ <FileType>1</FileType> <FilePath>../../components/libc/armlibc/mem_std.c</FilePath> </File> - </Files> - <Files> <File> <FileName>stubs.c</FileName> <FileType>1</FileType> @@ -754,43 +660,31 @@ <FileType>1</FileType> <FilePath>../../components/drivers/serial/serial.c</FilePath> </File> - </Files> - <Files> <File> <FileName>completion.c</FileName> <FileType>1</FileType> <FilePath>../../components/drivers/src/completion.c</FilePath> </File> - </Files> - <Files> <File> <FileName>dataqueue.c</FileName> <FileType>1</FileType> <FilePath>../../components/drivers/src/dataqueue.c</FilePath> </File> - </Files> - <Files> <File> <FileName>pipe.c</FileName> <FileType>1</FileType> <FilePath>../../components/drivers/src/pipe.c</FilePath> </File> - </Files> - <Files> <File> <FileName>portal.c</FileName> <FileType>1</FileType> <FilePath>../../components/drivers/src/portal.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ringbuffer.c</FileName> <FileType>1</FileType> <FilePath>../../components/drivers/src/ringbuffer.c</FilePath> </File> - </Files> - <Files> <File> <FileName>workqueue.c</FileName> <FileType>1</FileType> @@ -806,99 +700,71 @@ <FileType>1</FileType> <FilePath>../../components/finsh/shell.c</FilePath> </File> - </Files> - <Files> <File> <FileName>symbol.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/symbol.c</FilePath> </File> - </Files> - <Files> <File> <FileName>cmd.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/cmd.c</FilePath> </File> - </Files> - <Files> <File> <FileName>msh_cmd.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/msh_cmd.c</FilePath> </File> - </Files> - <Files> <File> <FileName>msh.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/msh.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_compiler.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_compiler.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_error.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_error.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_heap.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_heap.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_init.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_init.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_node.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_node.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_ops.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_ops.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_parser.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_parser.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_var.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_var.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_vm.c</FileName> <FileType>1</FileType> <FilePath>../../components/finsh/finsh_vm.c</FilePath> </File> - </Files> - <Files> <File> <FileName>finsh_token.c</FileName> <FileType>1</FileType> @@ -914,239 +780,171 @@ <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/api_lib.c</FilePath> </File> - </Files> - <Files> <File> <FileName>api_msg.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/api_msg.c</FilePath> </File> - </Files> - <Files> <File> <FileName>err.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/err.c</FilePath> </File> - </Files> - <Files> <File> <FileName>netbuf.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/netbuf.c</FilePath> </File> - </Files> - <Files> <File> <FileName>netdb.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/netdb.c</FilePath> </File> - </Files> - <Files> <File> <FileName>netifapi.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/netifapi.c</FilePath> </File> - </Files> - <Files> <File> <FileName>sockets.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/sockets.c</FilePath> </File> - </Files> - <Files> <File> <FileName>tcpip.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/api/tcpip.c</FilePath> </File> - </Files> - <Files> <File> <FileName>sys_arch.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/arch/sys_arch.c</FilePath> </File> - </Files> - <Files> <File> <FileName>def.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/def.c</FilePath> </File> - </Files> - <Files> <File> <FileName>dhcp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/dhcp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>dns.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/dns.c</FilePath> </File> - </Files> - <Files> <File> <FileName>init.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/init.c</FilePath> </File> - </Files> - <Files> <File> <FileName>memp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/memp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>netif.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/netif.c</FilePath> </File> - </Files> - <Files> <File> <FileName>pbuf.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/pbuf.c</FilePath> </File> - </Files> - <Files> <File> <FileName>raw.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/raw.c</FilePath> </File> - </Files> - <Files> <File> <FileName>stats.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/stats.c</FilePath> </File> - </Files> - <Files> <File> <FileName>sys.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/sys.c</FilePath> </File> - </Files> - <Files> <File> <FileName>tcp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/tcp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>tcp_in.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/tcp_in.c</FilePath> </File> - </Files> - <Files> <File> <FileName>tcp_out.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/tcp_out.c</FilePath> </File> - </Files> - <Files> <File> <FileName>timers.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/timers.c</FilePath> </File> - </Files> - <Files> <File> <FileName>udp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/udp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>autoip.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/autoip.c</FilePath> </File> - </Files> - <Files> <File> <FileName>icmp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/icmp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>igmp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/igmp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>inet.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/inet.c</FilePath> </File> - </Files> - <Files> <File> <FileName>inet_chksum.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/inet_chksum.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ip.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/ip.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ip_addr.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/ip_addr.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ip_frag.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/core/ipv4/ip_frag.c</FilePath> </File> - </Files> - <Files> <File> <FileName>etharp.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/netif/etharp.c</FilePath> </File> - </Files> - <Files> <File> <FileName>ethernetif.c</FileName> <FileType>1</FileType> <FilePath>../../components/net/lwip-1.4.1/src/netif/ethernetif.c</FilePath> </File> - </Files> - <Files> <File> <FileName>slipif.c</FileName> <FileType>1</FileType> @@ -1157,4 +955,5 @@ </Groups> </Target> </Targets> + </Project> |