diff options
| author | lxqyyds <[email protected]> | 2023-04-05 11:26:18 +0800 |
|---|---|---|
| committer | Man, Jianting (Meco) <[email protected]> | 2023-04-06 00:19:23 -0400 |
| commit | ba4e48b9dbec988173099f512a9f65ff7badd3a6 (patch) | |
| tree | 8e4546edf9f58f570ac7463e5ce9357b2635f400 | |
| parent | 99fc12ca82b6f510d6756c0d61d1e6c730ce0280 (diff) | |
[bsp] Format some files
38 files changed, 6027 insertions, 6027 deletions
diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h index 83d7476753..4d0e8beb8d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7.h @@ -8,7 +8,7 @@ * @version V1.0 * @date 5. January 2015 * - * @note Generated with SVDConv V2.75 + * @note Generated with SVDConv V2.75 * from CMSIS SVD File 'SVDConv_CME_M7.svd' Version 1.0, *******************************************************************************************************/ @@ -152,10 +152,10 @@ typedef struct { /*!< UART0 Structure __I uint16_t RESERVED1; __I uint16_t RX_BUF; /*!< receive buffer Register */ __I uint16_t RESERVED2; - + union { __IO uint32_t CTRL; /*!< control Register */ - + struct { __IO uint32_t MODE : 3; /*!< asc mode control */ __IO uint32_t STOP : 2; /*!< number of stop bits selection */ @@ -171,10 +171,10 @@ typedef struct { /*!< UART0 Structure __IO uint32_t RX_HALF_FULL: 5; /*!< receive fifi half full level */ } CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_MASK; /*!< interrupt mask register */ - + struct { __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ @@ -189,10 +189,10 @@ typedef struct { /*!< UART0 Structure __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */ } INT_MASK_b; /*!< BitSize */ }; - + union { __IO uint32_t STATUS; /*!< status register */ - + struct { __IO uint32_t RNE : 1; /*!< receiver FIFO not empty */ __IO uint32_t TE : 1; /*!< Transmitter FIFO empty */ @@ -205,34 +205,34 @@ typedef struct { /*!< UART0 Structure }; __IO uint8_t TIMEOUT; /*!< timeout Register */ __I uint8_t RESERVED3[3]; - + union { __IO uint32_t TX_RESET; /*!< transmit reset Register */ - + struct { __IO uint32_t EN : 1; /*!< enable */ } TX_RESET_b; /*!< BitSize */ }; - + union { __IO uint32_t RX_RESET; /*!< receive reset Register */ - + struct { __IO uint32_t EN : 1; /*!< enable */ } RX_RESET_b; /*!< BitSize */ }; - + union { __IO uint32_t RUN; /*!< uart enable register */ - + struct { __IO uint32_t EN : 1; /*!< enable */ } RUN_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_RAW; /*!< raw interrupt before mask register */ - + struct { __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ @@ -247,10 +247,10 @@ typedef struct { /*!< UART0 Structure __IO uint32_t RX_THRE_REACH: 1; /*!< Receive threshold reach interrupt */ } INT_RAW_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_SEEN; /*!< interrupt after mask register */ - + struct { __IO uint32_t RNE : 1; /*!< Receive FIFO not empty interrupt */ __IO uint32_t TE : 1; /*!< Transmitter FIFO empty interrupt */ @@ -278,37 +278,37 @@ typedef struct { /*!< UART0 Structure */ typedef struct { /*!< WDG Structure */ - + union { __IO uint32_t CTRL; /*!< control Register */ - + struct { __IO uint32_t EN : 1; /*!< flag indicates if watchdog is enabled or not */ __IO uint32_t INT_LEN : 1; /*!< watchdog report interrupt when COUNTER is 1/4 or 1/2 of LENGTH */ } CTRL_b; /*!< BitSize */ }; __IO uint32_t LEN; /*!< Ticks decrease down to 25% or 50% to trigger an interrupt */ - + union { __IO uint32_t INT_CTRL; /*!< interrupt control */ - + struct { __IO uint32_t MASK : 1; /*!< mask register */ __IO uint32_t TRIGGER_MODE: 1; /*!< trigger mode */ } INT_CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_STA; /*!< interrupt status register */ - + struct { __IO uint32_t STA : 1; /*!< interrupt status */ } INT_STA_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_RAW; /*!< interrupt raw register */ - + struct { __IO uint32_t STA : 1; /*!< interrupt status */ } INT_RAW_b; /*!< BitSize */ @@ -327,43 +327,43 @@ typedef struct { /*!< WDG Structure */ typedef struct { /*!< TIMER0 Structure */ - + union { __IO uint32_t CTRL; /*!< control Register */ - + struct { __IO uint32_t EN : 1; /*!< flag indicates if timer is enabled or not */ } CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t TYPE; /*!< type Register */ - + struct { __IO uint32_t SIGNLE_SHOT: 1; /*!< indicate timer generate only one interrupt if not reload */ } TYPE_b; /*!< BitSize */ }; __IO uint32_t LEN; /*!< length */ - + union { __IO uint32_t INT_EN; /*!< interrupt enable */ - + struct { __IO uint32_t EN_REVERSE : 1; /*!< flag indicates if timer is disable or not */ } INT_EN_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_STA; /*!< interrupt status */ - + struct { __IO uint32_t STA : 1; /*!< interrupt status */ } INT_STA_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_RAW; /*!< interrupt raw register */ - + struct { __IO uint32_t STA : 1; /*!< interrupt status */ } INT_RAW_b; /*!< BitSize */ @@ -382,10 +382,10 @@ typedef struct { /*!< TIMER0 Structure */ typedef struct { /*!< SPI0 Structure */ - + union { __I uint32_t STATUS; /*!< status Register */ - + struct { __I uint32_t RFIFO_EMPTY: 1; /*!< receive fifo is empty */ __I uint32_t RFIFO_FULL : 1; /*!< receive fifo is full */ @@ -398,10 +398,10 @@ typedef struct { /*!< SPI0 Structure __I uint32_t BUSY : 1; /*!< indecates if SPI is idle or busy */ } STATUS_b; /*!< BitSize */ }; - + union { __IO uint32_t CTRL; /*!< control Register */ - + struct { __IO uint32_t EN : 1; /*!< indicates if SPI is enabled or not */ __IO uint32_t RX_EN : 1; /*!< indicates if SPI receiver is enabled or not */ @@ -412,10 +412,10 @@ typedef struct { /*!< SPI0 Structure __IO uint32_t RX_BIT_SEQUENCE: 1; /*!< receive bit sequence. 0: MSB is received first */ } CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_MASK; /*!< interrupt mask Register */ - + struct { __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ @@ -426,10 +426,10 @@ typedef struct { /*!< SPI0 Structure __IO uint32_t DONE : 1; /*!< transmit done interrupt */ } INT_MASK_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_STATUS; /*!< interrupt Register */ - + struct { __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ @@ -440,10 +440,10 @@ typedef struct { /*!< SPI0 Structure __IO uint32_t DONE : 1; /*!< transmit done interrupt */ } INT_STATUS_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_RAW; /*!< interrupt raw Register */ - + struct { __IO uint32_t RFIFO_UNDERFLOW: 1; /*!< receive fifo underflow interrupt */ __IO uint32_t RFIFO_OVERFLOW: 1; /*!< receive fifo overflow interrupt */ @@ -454,10 +454,10 @@ typedef struct { /*!< SPI0 Structure __IO uint32_t DONE : 1; /*!< transmit done interrupt */ } INT_RAW_b; /*!< BitSize */ }; - + union { __IO uint32_t BCNT; /*!< bit length while transmitting and receiving */ - + struct { __IO uint32_t CNT : 5; /*!< bit length while transmitting and receiving, BCNT + 1 */ } BCNT_b; /*!< BitSize */ @@ -467,10 +467,10 @@ typedef struct { /*!< SPI0 Structure __IO uint16_t DIV; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */ __I uint16_t RESERVED1; __IO uint32_t TRANS_CNT; /*!< transmit data length, data number = TRANS_CNT + 1 */ - + union { __O uint32_t TRANS_START; /*!< transmit startup register, write 1 to trigger transmision once */ - + struct { __O uint32_t TX_TRIGGER : 1; /*!< write 1 to trigger transmision once */ } TRANS_START_b; /*!< BitSize */ @@ -489,39 +489,39 @@ typedef struct { /*!< SPI0 Structure */ typedef struct { /*!< I2C0 Structure */ - + union { __IO uint32_t CTRL; /*!< control Register */ - + struct { __IO uint32_t MODE : 1; /*!< master or slave mode */ __IO uint32_t MASTER_ADDR_WIDTH: 1; /*!< 7- or 10-bits address as a master */ __IO uint32_t SLAVE_ADDR_WIDTH: 1; /*!< 7- or 10-bits address width as a slave */ } CTRL_b; /*!< BitSize */ }; - + union { __IO uint16_t TAR; /*!< target address Register */ - + struct { __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */ __IO uint16_t START_BYTE : 1; /*!< Enable start Byte for each transfer */ } TAR_b; /*!< BitSize */ }; __I uint16_t RESERVED0; - + union { __IO uint16_t SAR; /*!< slave address Register */ - + struct { __IO uint16_t ADDR10 : 10; /*!< 7- or 10-bits address */ } SAR_b; /*!< BitSize */ }; __I uint16_t RESERVED1; - + union { __IO uint32_t DATA_CMD; /*!< I2C transfer data/command entry */ - + struct { __IO uint32_t DATA : 8; /*!< 8-bits data */ __O uint32_t RD_CMD : 1; /*!< read command for master mode only, write 0 if slave mode */ @@ -529,30 +529,30 @@ typedef struct { /*!< I2C0 Structure __O uint32_t WR_RD_CMD : 1; /*!< write and read command for master mode only */ } DATA_CMD_b; /*!< BitSize */ }; - + union { __IO uint32_t WRITE_READ_CNT; /*!< I2C write and read data byte counter Register */ - + struct { __IO uint32_t RD_BYTE_CNT: 9; /*!< Decide the number of bytes read back as a master-receiver */ uint32_t : 7; __IO uint32_t WR_BYTE_CNT: 9; /*!< Decide the number of byte to send as a master-transmitter */ } WRITE_READ_CNT_b; /*!< BitSize */ }; - + union { __IO uint32_t SCL_CNT; /*!< I2C clk pulse counter */ - + struct { __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< the SCL clock high-period count */ __IO uint32_t LOW_LEVEL_TICK: 16; /*!< the SCL clock low-period count */ } SCL_CNT_b; /*!< BitSize */ }; __I uint32_t RESERVED2; - + union { __I uint32_t INT_STATUS; /*!< I2C interrupt sources */ - + struct { __I uint32_t RX_UNDER : 1; /*!< receiver underflow */ __I uint32_t RX_OVER : 1; /*!< receiver overflow */ @@ -566,10 +566,10 @@ typedef struct { /*!< I2C0 Structure __I uint32_t WR_REQ : 1; /*!< write request */ } INT_STATUS_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_MASK; /*!< I2C interrupt mask register */ - + struct { __I uint32_t RX_UNDER : 1; /*!< receiver underflow */ __I uint32_t RX_OVER : 1; /*!< receiver overflow */ @@ -584,88 +584,88 @@ typedef struct { /*!< I2C0 Structure } INT_MASK_b; /*!< BitSize */ }; __I uint32_t RESERVED3; - + union { __IO uint32_t RX_TL; /*!< I2C receive FIFO threshold */ - + struct { __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */ } RX_TL_b; /*!< BitSize */ }; - + union { __IO uint32_t TX_TL; /*!< I2C transmit FIFO threshold */ - + struct { __IO uint32_t THRESHOLD : 5; /*!< FIFO threashold */ } TX_TL_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_ALL_INT; /*!< I2C clear all interrupt register */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear all individual interrupts */ } CLR_ALL_INT_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_RX_UNDER; /*!< I2C clear RX_UNDER interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_UNDER interrupt (bit 19) of the I2C_STATUS register */ } CLR_RX_UNDER_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_RX_OVER; /*!< I2C clear RX_OVER interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_OVER interrupt (bit 20) of the I2C_STATUS register */ } CLR_RX_OVER_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_TX_OVER; /*!< I2C clear TX_OVER interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_OVER interrupt (bit 22) of the I2C_STATUS register */ } CLR_TX_OVER_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_RD_REQ; /*!< I2C clear RD_REQ interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the RD_REQ interrupt (bit 24) of the I2C_STATUS register */ } CLR_RD_REQ_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_TX_ABRT; /*!< I2C clear TX_ABRT interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_ABRT interrupts (bit 25 , bit 18, bit 17, bit 16 and bit 15) of the I2C_STATUS register. */ } CLR_TX_ABRT_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_RX_DONE; /*!< I2C clear RX_DONE interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the RX_DONE interrupt (bit 26) of the I2C_STATUS register */ } CLR_RX_DONE_b; /*!< BitSize */ }; - + union { __IO uint32_t ENABLE; /*!< I2C enable register */ - + struct { __IO uint32_t EN : 1; /*!< enable device */ uint32_t : 30; @@ -673,10 +673,10 @@ typedef struct { /*!< I2C0 Structure interrupts deserted */ } ENABLE_b; /*!< BitSize */ }; - + union { __I uint32_t STATUS; /*!< I2C status register */ - + struct { __I uint32_t BUSY : 1; /*!< I2C busy Status */ __I uint32_t TX_FIFO_NOT_FULL: 1; /*!< transmit FIFO is not full */ @@ -709,36 +709,36 @@ typedef struct { /*!< I2C0 Structure __I uint32_t MST_WR_RD_FLAG: 1; /*!< Master is executing write-read command */ } STATUS_b; /*!< BitSize */ }; - + union { __I uint32_t TX_FIFO_LEVEL; /*!< I2C transmit FIFO level */ - + struct { __I uint32_t LEVEL : 5; /*!< FIFO level */ } TX_FIFO_LEVEL_b; /*!< BitSize */ }; - + union { __I uint32_t RX_FIFO_LEVEL; /*!< I2C receive FIFO level */ - + struct { __I uint32_t LEVEL : 5; /*!< FIFO level */ } RX_FIFO_LEVEL_b; /*!< BitSize */ }; __I uint32_t RESERVED4; - + union { __O uint32_t SLAVE_NACK; /*!< I2C slave send a data NACK */ - + struct { __O uint32_t NACK : 1; /*!< data NACK */ } SLAVE_NACK_b; /*!< BitSize */ }; __I uint32_t RESERVED5; - + union { __IO uint32_t SDA_SETUP; /*!< I2C SDA setup timer */ - + struct { __IO uint32_t TSETUP : 10; /*!< This counter defines the max value of the following constrains:THD:STA TSU:STO,TSETUP: T / INPUT_CLK_PERIOD */ @@ -746,10 +746,10 @@ typedef struct { /*!< I2C0 Structure / INPUT_CLK_PERIOD */ } SDA_SETUP_b; /*!< BitSize */ }; - + union { __IO uint32_t TSU_STA_SETUP; /*!< I2C Tsu_sta and Tbuf_free timer */ - + struct { __IO uint32_t TBUF : 10; /*!< This counter defines the constrain of bus free interval: Tbuf, Tbuf : Tbus_free / INPUT_CLK_PERIOD */ @@ -761,10 +761,10 @@ typedef struct { /*!< I2C0 Structure __IO uint32_t SCL_FILTER_EN: 1; /*!< SCL filter enable bit */ } TSU_STA_SETUP_b; /*!< BitSize */ }; - + union { __I uint32_t CLR_TX_DONE; /*!< I2C clear TX_DONE interrupt */ - + struct { __I uint32_t CLEAR : 1; /*!< Read this register to clear the TX_DONE interrupt (bit 27) of the I2C_STATUS register */ @@ -783,20 +783,20 @@ typedef struct { /*!< I2C0 Structure */ typedef struct { /*!< RTC Structure */ - + union { __IO uint32_t INT_STATUS; /*!< interrupt Register */ - + struct { __IO uint32_t SECOND : 1; /*!< 1s interrupt, write 1 clear 0 */ __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt, write 1 clear 0 */ } INT_STATUS_b; /*!< BitSize */ }; __IO uint32_t SECOND; /*!< current seconds of system time */ - + union { __IO uint16_t MILLSECOND; /*!< current millseconds of system time */ - + struct { __IO uint16_t MS : 10; /*!< micro seconds */ } MILLSECOND_b; /*!< BitSize */ @@ -822,10 +822,10 @@ typedef struct { /*!< GPIO Structure __IO uint32_t GPIO_INT_STATUS; /*!< GPIO input interrupt status */ __IO uint32_t GPIO_INT_RAW; /*!< GPIO input interrupt raw */ __IO uint32_t GPIO_POSITIVE_EDGE_INT_TRIGGER; /*!< triggers an interrupt while a positive edge, else negitive edge */ - + union { __IO uint32_t PWM_OUT_SEL; /*!< Select gpio output from PWM */ - + struct { __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */ __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */ @@ -833,46 +833,46 @@ typedef struct { /*!< GPIO Structure __IO uint32_t GPIO_H_20 : 1; /*!< GPIO_H[20] is selected to output PWM */ } PWM_OUT_SEL_b; /*!< BitSize */ }; - + union { __IO uint32_t PWM_OUT0_LEN; /*!< Pwm channel 0 paramters */ - + struct { __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ } PWM_OUT0_LEN_b; /*!< BitSize */ }; - + union { __IO uint32_t PWM_OUT1_LEN; /*!< Pwm channel 1 paramters */ - + struct { __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ } PWM_OUT1_LEN_b; /*!< BitSize */ }; - + union { __IO uint32_t PWM_OUT2_LEN; /*!< Pwm channel 2 paramters */ - + struct { __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ } PWM_OUT2_LEN_b; /*!< BitSize */ }; - + union { __IO uint32_t PWM_OUT3_LEN; /*!< Pwm channel 3 paramters */ - + struct { __IO uint32_t LOW_LEVEL_TICK: 16; /*!< low level width = ticks + 1 */ __IO uint32_t HIGH_LEVEL_TICK: 16; /*!< high level width = ticks + 1 */ } PWM_OUT3_LEN_b; /*!< BitSize */ }; - + union { __IO uint32_t PWM_OUT_EN; /*!< Pwm enable */ - + struct { __IO uint32_t GPIO_31 : 1; /*!< GPIO[31] is selected to output PWM */ __IO uint32_t GPIO_H_9 : 1; /*!< GPIO_H[9] is selected to output PWM */ @@ -909,10 +909,10 @@ typedef struct { /*!< GPIO Structure */ typedef struct { /*!< NOR_FLASH Structure */ - + union { __IO uint32_t CTRL0; /*!< control Register 0 */ - + struct { __IO uint32_t DIV : 8; /*!< frequency division register, fsck = fclk_io / (DIV + 1) / 2 */ __IO uint32_t CS_REVALID_INTERVAL: 8; /*!< interval from CS invalid to valid, number of half cycle of SCK */ @@ -920,19 +920,19 @@ typedef struct { /*!< NOR_FLASH Structure contains all in transparent state. 0 is unlimited */ } CTRL0_b; /*!< BitSize */ }; - + union { __IO uint32_t CTRL1; /*!< control Register 1 */ - + struct { __IO uint32_t CMD : 8; /*!< operated command */ __IO uint32_t ADDRESS : 24; /*!< RW address */ } CTRL1_b; /*!< BitSize */ }; - + union { __IO uint32_t TRIGGER; /*!< trigger register */ - + struct { __O uint32_t OP_START : 1; /*!< operation start. */ __IO uint32_t OP_CLEAN : 1; /*!< operation clean, stop current opration and clean FIFO */ @@ -940,10 +940,10 @@ typedef struct { /*!< NOR_FLASH Structure __IO uint32_t TRSP_EN : 1; /*!< enable transparent operation */ } TRIGGER_b; /*!< BitSize */ }; - + union { __I uint32_t STATUS; /*!< status register */ - + struct { __I uint32_t BUSY : 1; /*!< reading or writting */ __I uint32_t RD_FIFO_ALMOST_FULL: 1; /*!< read FIFO is almost full */ @@ -956,10 +956,10 @@ typedef struct { /*!< NOR_FLASH Structure }; __IO uint32_t DATA; /*!< data register. lower bits are significant in read and higher bits are significant in writting */ - + union { __IO uint32_t BYPASS; /*!< bypass Register, is used for JTAG connecting FLASH directly */ - + struct { __IO uint32_t EN : 1; /*!< enable bypass */ } BYPASS_b; /*!< BitSize */ @@ -977,10 +977,10 @@ typedef struct { /*!< NOR_FLASH Structure */ typedef struct { /*!< ADC Structure */ - + union { __IO uint32_t POWERDOWN_RESET; /*!< power down and reset Register */ - + struct { __IO uint32_t RESET_ADC2 : 1; /*!< ADC2, reset, active high */ __IO uint32_t RESET_ADC1 : 1; /*!< ADC1, reset, active high */ @@ -988,19 +988,19 @@ typedef struct { /*!< ADC Structure __IO uint32_t POWERDOWN_ADC1: 1; /*!< ADC1, power down, active high */ } POWERDOWN_RESET_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG0; /*!< config Register */ - + struct { __IO uint32_t VSEN : 3; /*!< ADC-1 VSEN Selection */ __IO uint32_t PHASE_CTRL : 2; /*!< ADC-1 and ADC-2 CLK Phase Control */ } CFG0_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_ADC1; /*!< config ADC1 register */ - + struct { __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */ __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */ @@ -1008,10 +1008,10 @@ typedef struct { /*!< ADC Structure __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */ } CFG_ADC1_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_ADC2; /*!< config ADC1 register */ - + struct { __IO uint32_t SYSTEM_MODE: 3; /*!< system mode selection */ __IO uint32_t CHANNEL_SEL: 4; /*!< channel selection */ @@ -1019,34 +1019,34 @@ typedef struct { /*!< ADC Structure __IO uint32_t MULTI_CHANNEL_BIT: 8; /*!< each bit represents each channel */ } CFG_ADC2_b; /*!< BitSize */ }; - + union { __IO uint32_t ADC1_FIFO_CLEAR; /*!< clear adc1 fifo data */ - + struct { __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ } ADC1_FIFO_CLEAR_b; /*!< BitSize */ }; - + union { __IO uint32_t ADC2_FIFO_CLEAR; /*!< clear adc2 fifo data */ - + struct { __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ } ADC2_FIFO_CLEAR_b; /*!< BitSize */ }; - + union { __IO uint32_t ALL_ADC_FIFO_CLEAR; /*!< clear adc1 and adc2 fifo data */ - + struct { __IO uint32_t CLEAR : 1; /*!< clear fifo data, active high */ } ALL_ADC_FIFO_CLEAR_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_MASK; /*!< interrupt mask register */ - + struct { __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ @@ -1056,10 +1056,10 @@ typedef struct { /*!< ADC Structure __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */ } INT_MASK_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_RAW; /*!< interrupt raw register */ - + struct { __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ @@ -1069,10 +1069,10 @@ typedef struct { /*!< ADC Structure __IO uint32_t ADC2_EMPTY_ERR: 1; /*!< ADC 2 read empty error */ } INT_RAW_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_STATUS; /*!< interrupt status register */ - + struct { __IO uint32_t ADC1_ALMOST_FULL: 1; /*!< ADC 1 almost full */ __IO uint32_t ADC1_OVERFLOW: 1; /*!< ADC 1 is overflow */ @@ -1090,10 +1090,10 @@ typedef struct { /*!< ADC Structure __I uint32_t ADC2_OUT_NEGTIVE_GAIN_CALIBRATION; /*!< ADC-2 Output in gain calibration when Input=-FS, Ideally DAO[11:0]=801h */ __I uint32_t ADC1_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-1 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */ __I uint32_t ADC2_OUT_POSITIVE_GAIN_CALIBRATION;/*!< ADC-2 Output in gain calibration when Input=FS, Ideally DAO[11:0]=7FFh */ - + union { __I uint32_t EOC; /*!< Conversion End Indicator */ - + struct { __I uint32_t ADC2_EOC_GAIN: 1; /*!< ADC2 EOC_GAIN signal, conversion is done */ __I uint32_t ADC2_EOC_OFF: 1; /*!< ADC2 EOC_OFF signal, conversion is done */ @@ -1103,87 +1103,87 @@ typedef struct { /*!< ADC Structure __I uint32_t ADC1_EOC : 1; /*!< ADC1 EOC signal, conversion is done */ } EOC_b; /*!< BitSize */ }; - + union { __I uint32_t BUSY; /*!< ADC is busy */ - + struct { __I uint32_t ADC1_BUSY : 1; /*!< ADC1 is busy */ __I uint32_t ADC2_BUSY : 1; /*!< ADC2 is busy */ } BUSY_b; /*!< BitSize */ }; - + union { __O uint32_t ADC1_START; /*!< ADC1 startup enable */ - + struct { __O uint32_t EN : 1; /*!< start */ } ADC1_START_b; /*!< BitSize */ }; - + union { __O uint32_t ADC1_STOP; /*!< ADC1 stop enable */ - + struct { __O uint32_t EN : 1; /*!< start */ } ADC1_STOP_b; /*!< BitSize */ }; - + union { __O uint16_t ADC1_FIFO_READ; /*!< ADC1 FIFO read data */ - + struct { __O uint16_t DATA : 12; /*!< data */ __O uint16_t CHANNEL : 4; /*!< channel number */ } ADC1_FIFO_READ_b; /*!< BitSize */ }; __I uint16_t RESERVED0; - + union { __O uint32_t ADC2_START; /*!< ADC2 startup enable, only for single-conversion */ - + struct { __O uint32_t EN : 1; /*!< start */ } ADC2_START_b; /*!< BitSize */ }; - + union { __O uint32_t ADC2_STOP; /*!< ADC1 stop enable, only for single-conversion */ - + struct { __O uint32_t EN : 1; /*!< start */ } ADC2_STOP_b; /*!< BitSize */ }; - + union { __O uint16_t ADC2_FIFO_READ; /*!< ADC2 FIFO read data */ - + struct { __O uint16_t DATA : 12; /*!< data */ __O uint16_t CHANNEL : 4; /*!< channel number */ } ADC2_FIFO_READ_b; /*!< BitSize */ }; __I uint16_t RESERVED1; - + union { __O uint32_t ALL_ADC_START; /*!< all ADCs start */ - + struct { __O uint32_t EN : 1; /*!< start */ } ALL_ADC_START_b; /*!< BitSize */ }; - + union { __O uint32_t ALL_ADC_STOP; /*!< all ADCs stop */ - + struct { __O uint32_t EN : 1; /*!< start */ } ALL_ADC_STOP_b; /*!< BitSize */ }; - + union { __I uint32_t ALL_ADC_FIFO_READ; /*!< all ADCs FIFO read data */ - + struct { __I uint32_t ADC1_DATA : 12; /*!< ADC1 data */ __I uint32_t ADC1_CHANNEL: 4; /*!< ADC1 channel number */ @@ -1191,10 +1191,10 @@ typedef struct { /*!< ADC Structure __I uint32_t ADC2_CHANNEL: 4; /*!< ADC2 channel number */ } ALL_ADC_FIFO_READ_b; /*!< BitSize */ }; - + union { __I uint32_t STATUS; /*!< status register */ - + struct { __I uint32_t ADC1_READ_EMPTY: 1; /*!< ADC1 read empty */ __I uint32_t ADC2_READ_EMPTY: 1; /*!< ADC2 read empty */ @@ -1219,10 +1219,10 @@ typedef struct { /*!< ADC Structure */ typedef struct { /*!< EFUSE Structure */ - + union { __IO uint32_t USER_CTRL_LOW; /*!< low user region control */ - + struct { __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */ __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */ @@ -1234,10 +1234,10 @@ typedef struct { /*!< EFUSE Structure __IO uint32_t TMRF : 2; /*!< Reference resistor select, 1200ohm is recommended */ } USER_CTRL_LOW_b; /*!< BitSize */ }; - + union { __IO uint32_t TIMING_0; /*!< timing 0 */ - + struct { __IO uint32_t TPRS : 7; /*!< TPRS */ __IO uint32_t TESR : 2; /*!< TESR */ @@ -1249,10 +1249,10 @@ typedef struct { /*!< EFUSE Structure __IO uint32_t TPWPH : 5; /*!< TPWPH[6:2] */ } TIMING_0_b; /*!< BitSize */ }; - + union { __IO uint32_t TIMING_1; /*!< timing 1 */ - + struct { __IO uint32_t TPWPS : 7; /*!< TPWPS */ __IO uint32_t TEPS : 4; /*!< TEPS */ @@ -1265,10 +1265,10 @@ typedef struct { /*!< EFUSE Structure __IO uint32_t USER_DATA1_LOW; /*!< user data [63:32] */ __IO uint32_t USER_DATA2_LOW; /*!< user data [95:64] */ __IO uint32_t USER_DATA3_LOW; /*!< user data [127:96] */ - + union { __IO uint32_t USER_DATA4_LOW; /*!< crc and lock bit */ - + struct { __IO uint32_t LOCK : 1; /*!< write protection if true */ uint32_t : 23; @@ -1276,10 +1276,10 @@ typedef struct { /*!< EFUSE Structure } USER_DATA4_LOW_b; /*!< BitSize */ }; __I uint32_t RESERVED0[3]; - + union { __IO uint32_t USER_CTRL_HI; /*!< high user region control */ - + struct { __IO uint32_t WR_EN : 1; /*!< write enable. 1 : write data into EFUSE. clear 0 after read */ __IO uint32_t RD_EN : 1; /*!< read enable. 1 : write data into EFUSE. clear 0 after read */ @@ -1295,10 +1295,10 @@ typedef struct { /*!< EFUSE Structure __IO uint32_t USER_DATA1_HI; /*!< user data [191:160] */ __IO uint32_t USER_DATA2_HI; /*!< user data [223:192] */ __IO uint32_t USER_DATA3_HI; /*!< user data [255:224] */ - + union { __IO uint32_t USER_DATA4_HI; /*!< crc and lock bit */ - + struct { __IO uint32_t LOCK : 1; /*!< write protection if true */ uint32_t : 23; @@ -1318,10 +1318,10 @@ typedef struct { /*!< EFUSE Structure */ typedef struct { /*!< CAN0 Structure */ - + union { __IO uint8_t MODE; /*!< mode Register */ - + struct { __IO uint8_t RM : 1; /*!< reset mode if 1 or operation mode */ __IO uint8_t LOM : 1; /*!< Listen only mode */ @@ -1331,10 +1331,10 @@ typedef struct { /*!< CAN0 Structure } MODE_b; /*!< BitSize */ }; __I uint8_t RESERVED0[3]; - + union { __O uint8_t CMD; /*!< command Register */ - + struct { __O uint8_t TR : 1; /*!< Set to 1 when a message is to be transmitted */ __O uint8_t AT : 1; /*!< Set to 1 to cancel the next transmission request */ @@ -1345,10 +1345,10 @@ typedef struct { /*!< CAN0 Structure } CMD_b; /*!< BitSize */ }; __I uint8_t RESERVED1[3]; - + union { __I uint8_t STATUS; /*!< status Register */ - + struct { __I uint8_t RBNE : 1; /*!< Receive Buffer not empty */ __I uint8_t DO : 1; /*!< Data Overrun Status */ @@ -1362,10 +1362,10 @@ typedef struct { /*!< CAN0 Structure } STATUS_b; /*!< BitSize */ }; __I uint8_t RESERVED2[3]; - + union { __I uint8_t INT; /*!< interrupt Register */ - + struct { __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */ __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */ @@ -1381,10 +1381,10 @@ typedef struct { /*!< CAN0 Structure } INT_b; /*!< BitSize */ }; __I uint8_t RESERVED3[3]; - + union { __IO uint8_t INT_EN; /*!< interrupt enabled Register */ - + struct { __I uint8_t RBNF : 1; /*!< Receive Buffer not empty */ __I uint8_t TB_UNLOCK : 1; /*!< Transmit Buffer is unlocked and not in transmitting */ @@ -1400,10 +1400,10 @@ typedef struct { /*!< CAN0 Structure } INT_EN_b; /*!< BitSize */ }; __I uint8_t RESERVED4[7]; - + union { __IO uint8_t BTR0; /*!< Bus Timing 0 */ - + struct { __IO uint8_t BRP : 6; /*!< TQ =2 x Txtal1 x (32 x BRP.5 + 16 x BRP.4 + 8 x BRP.3 + 4 x BRP.2 + 2 x BRP.1 + BRP.0 + 1) */ @@ -1411,10 +1411,10 @@ typedef struct { /*!< CAN0 Structure } BTR0_b; /*!< BitSize */ }; __I uint8_t RESERVED5[3]; - + union { __IO uint8_t BTR1; /*!< Bus Timing 1 */ - + struct { __IO uint8_t TSEG1 : 4; /*!< the maximum number of time quanta of propagation and 1st phase segment */ @@ -1423,29 +1423,29 @@ typedef struct { /*!< CAN0 Structure } BTR1_b; /*!< BitSize */ }; __I uint8_t RESERVED6[3]; - + union { __IO uint8_t OCR; /*!< Output Control Register */ - + struct { __IO uint8_t MODE : 2; /*!< output control mode */ } OCR_b; /*!< BitSize */ }; __I uint8_t RESERVED7[11]; - + union { __I uint8_t ALC; /*!< Arbitration Lost Capture */ - + struct { __I uint8_t BIT : 5; /*!< the current position of the Bit Processor when bus arbitration lost, 1st bit (ID.28) if 0 */ } ALC_b; /*!< BitSize */ }; __I uint8_t RESERVED8[3]; - + union { __I uint8_t ECC; /*!< Error Code Capture */ - + struct { __I uint8_t SEGMENT : 5; /*!< segment code */ __I uint8_t DIRECTION : 1; /*!< If 1, the error occurred during reception. If 0, the error occurred @@ -1460,11 +1460,11 @@ typedef struct { /*!< CAN0 Structure __I uint8_t RESERVED11[3]; __IO uint8_t TXERR; /*!< Transmit Error Counter */ __I uint8_t RESERVED12[3]; - + union { __IO uint8_t FI_OR_ACR0; /*!< Transmit Frame Information if writting or Receive Frame Information if reading, ACR[0] if reset mode */ - + struct { __IO uint8_t DLC : 4; /*!< byte number in the data */ uint8_t : 2; @@ -1512,10 +1512,10 @@ typedef struct { /*!< CAN0 Structure __I uint8_t RESERVED25[3]; __IO uint8_t RMC; /*!< Receive Message Counter */ __I uint8_t RESERVED26[7]; - + union { __IO uint8_t CDR; /*!< Clock Divider Register */ - + struct { __IO uint8_t DIVIDER : 3; /*!< divider of XTAL1 */ __IO uint8_t OFF : 1; /*!< disable XTAL1 */ @@ -1538,10 +1538,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED0; __IO uint32_t DAR0; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED1; - + union { __IO uint32_t LLP0; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -1550,10 +1550,10 @@ typedef struct { /*!< DMA Structure } LLP0_b; /*!< BitSize */ }; __I uint32_t RESERVED2; - + union { __IO uint32_t CTL_LOW0; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -1572,10 +1572,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW0_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI0; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -1590,10 +1590,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED5; __IO uint32_t DSTATAR0; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED6; - + union { __IO uint32_t CFG_LOW0; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -1613,10 +1613,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW0_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI0; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -1628,20 +1628,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI0_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR0; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR0_b; /*!< BitSize */ }; __I uint32_t RESERVED7; - + union { __IO uint32_t DSR0; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -1653,10 +1653,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED9; __IO uint32_t DAR1; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED10; - + union { __IO uint32_t LLP1; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -1665,10 +1665,10 @@ typedef struct { /*!< DMA Structure } LLP1_b; /*!< BitSize */ }; __I uint32_t RESERVED11; - + union { __IO uint32_t CTL_LOW1; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -1687,10 +1687,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW1_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI1; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -1705,10 +1705,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED14; __IO uint32_t DSTATAR1; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED15; - + union { __IO uint32_t CFG_LOW1; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -1728,10 +1728,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW1_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI1; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -1743,20 +1743,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI1_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR1; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR1_b; /*!< BitSize */ }; __I uint32_t RESERVED16; - + union { __IO uint32_t DSR1; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -1768,10 +1768,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED18; __IO uint32_t DAR2; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED19; - + union { __IO uint32_t LLP2; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -1780,10 +1780,10 @@ typedef struct { /*!< DMA Structure } LLP2_b; /*!< BitSize */ }; __I uint32_t RESERVED20; - + union { __IO uint32_t CTL_LOW2; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -1802,10 +1802,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW2_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI2; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -1820,10 +1820,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED23; __IO uint32_t DSTATAR2; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED24; - + union { __IO uint32_t CFG_LOW2; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -1843,10 +1843,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW2_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI2; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -1858,20 +1858,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI2_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR2; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR2_b; /*!< BitSize */ }; __I uint32_t RESERVED25; - + union { __IO uint32_t DSR2; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -1883,10 +1883,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED27; __IO uint32_t DAR3; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED28; - + union { __IO uint32_t LLP3; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -1895,10 +1895,10 @@ typedef struct { /*!< DMA Structure } LLP3_b; /*!< BitSize */ }; __I uint32_t RESERVED29; - + union { __IO uint32_t CTL_LOW3; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -1917,10 +1917,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW3_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI3; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -1935,10 +1935,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED32; __IO uint32_t DSTATAR3; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED33; - + union { __IO uint32_t CFG_LOW3; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -1958,10 +1958,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW3_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI3; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -1973,20 +1973,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI3_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR3; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR3_b; /*!< BitSize */ }; __I uint32_t RESERVED34; - + union { __IO uint32_t DSR3; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -1998,10 +1998,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED36; __IO uint32_t DAR4; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED37; - + union { __IO uint32_t LLP4; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -2010,10 +2010,10 @@ typedef struct { /*!< DMA Structure } LLP4_b; /*!< BitSize */ }; __I uint32_t RESERVED38; - + union { __IO uint32_t CTL_LOW4; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -2032,10 +2032,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW4_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI4; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -2050,10 +2050,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED41; __IO uint32_t DSTATAR4; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED42; - + union { __IO uint32_t CFG_LOW4; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -2073,10 +2073,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW4_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI4; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -2088,20 +2088,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI4_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR4; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR4_b; /*!< BitSize */ }; __I uint32_t RESERVED43; - + union { __IO uint32_t DSR4; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -2113,10 +2113,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED45; __IO uint32_t DAR5; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED46; - + union { __IO uint32_t LLP5; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -2125,10 +2125,10 @@ typedef struct { /*!< DMA Structure } LLP5_b; /*!< BitSize */ }; __I uint32_t RESERVED47; - + union { __IO uint32_t CTL_LOW5; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -2147,10 +2147,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW5_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI5; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -2165,10 +2165,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED50; __IO uint32_t DSTATAR5; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED51; - + union { __IO uint32_t CFG_LOW5; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -2188,10 +2188,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW5_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI5; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -2203,20 +2203,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI5_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR5; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR5_b; /*!< BitSize */ }; __I uint32_t RESERVED52; - + union { __IO uint32_t DSR5; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -2228,10 +2228,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED54; __IO uint32_t DAR6; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED55; - + union { __IO uint32_t LLP6; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -2240,10 +2240,10 @@ typedef struct { /*!< DMA Structure } LLP6_b; /*!< BitSize */ }; __I uint32_t RESERVED56; - + union { __IO uint32_t CTL_LOW6; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -2262,10 +2262,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW6_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI6; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -2280,10 +2280,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED59; __IO uint32_t DSTATAR6; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED60; - + union { __IO uint32_t CFG_LOW6; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -2303,10 +2303,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW6_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI6; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -2318,20 +2318,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI6_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR6; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR6_b; /*!< BitSize */ }; __I uint32_t RESERVED61; - + union { __IO uint32_t DSR6; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -2343,10 +2343,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED63; __IO uint32_t DAR7; /*!< Current Destination Address of DMA transfer */ __I uint32_t RESERVED64; - + union { __IO uint32_t LLP7; /*!< Linked List Pointer Register for Channel */ - + struct { __IO uint32_t LMS : 2; /*!< Identifies the AHB layer/interface where the memory device that stores the next linked list item resides. */ @@ -2355,10 +2355,10 @@ typedef struct { /*!< DMA Structure } LLP7_b; /*!< BitSize */ }; __I uint32_t RESERVED65; - + union { __IO uint32_t CTL_LOW7; /*!< Lower 32-bits Control Register for Channel */ - + struct { __IO uint32_t INT_EN : 1; /*!< Interrupt Enable Bit */ __IO uint32_t DST_TR_WIDTH: 3; /*!< Destination Transfer Width */ @@ -2377,10 +2377,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t LLP_SRC_EN : 1; /*!< Block chaining is enabled on the source side */ } CTL_LOW7_b; /*!< BitSize */ }; - + union { __IO uint32_t CTL_HI7; /*!< Higher 32-bits Control Register for Channel */ - + struct { __IO uint32_t BLOCK_TS : 12; /*!< indicates the total number of single transactions to perform for every block transfer */ @@ -2395,10 +2395,10 @@ typedef struct { /*!< DMA Structure __I uint32_t RESERVED68; __IO uint32_t DSTATAR7; /*!< Destination Status Address Register for Channel */ __I uint32_t RESERVED69; - + union { __IO uint32_t CFG_LOW7; /*!< Lower 32-bit Configuration Register for Channel */ - + struct { uint32_t : 5; __IO uint32_t CH_PRIOR : 3; /*!< Channel priority. A priority of 7 is the highest priority */ @@ -2418,10 +2418,10 @@ typedef struct { /*!< DMA Structure __IO uint32_t RELOAD_DST : 1; /*!< Automatic Destination Reload */ } CFG_LOW7_b; /*!< BitSize */ }; - + union { __IO uint32_t CFG_HI7; /*!< Higher 32-bit Configuration Register for Channel */ - + struct { __IO uint32_t FCMODE : 1; /*!< if source transaction requests aren't serviced when the Destination Peripheral is the flow controller. */ @@ -2433,20 +2433,20 @@ typedef struct { /*!< DMA Structure __IO uint32_t SS_UPD_EN : 1; /*!< STATx is only updated from STATARx */ } CFG_HI7_b; /*!< BitSize */ }; - + union { __IO uint32_t SGR7; /*!< Source Gather Register for Channel */ - + struct { __IO uint32_t SGI : 20; /*!< Source gather interval */ __IO uint32_t SGC : 12; /*!< Specifies the number of contiguous source transfers of CTLx.SRC_TR_WIDTH */ } SGR7_b; /*!< BitSize */ }; __I uint32_t RESERVED70; - + union { __IO uint32_t DSR7; /*!< Destination Scatter Register for Channel */ - + struct { __IO uint32_t DSI : 20; /*!< Destination scatter interval */ __IO uint32_t DSC : 12; /*!< Specifies the number of contiguous destination transfers of @@ -2464,50 +2464,50 @@ typedef struct { /*!< DMA Structure __I uint8_t RESERVED75[7]; __I uint8_t INT_ERR; /*!< Error */ __I uint8_t RESERVED76[7]; - + union { __IO uint16_t INT_EN_TFR; /*!< DMA Transfer Complete */ - + struct { __IO uint16_t EN : 8; /*!< interrupt enable */ __IO uint16_t WE : 8; /*!< interrupt enable write enable */ } INT_EN_TFR_b; /*!< BitSize */ }; __I uint16_t RESERVED77[3]; - + union { __IO uint16_t INT_EN_BLOCK; /*!< Block Transfer Complete */ - + struct { __IO uint16_t EN : 8; /*!< interrupt enable */ __IO uint16_t WE : 8; /*!< interrupt enable write enable */ } INT_EN_BLOCK_b; /*!< BitSize */ }; __I uint16_t RESERVED78[3]; - + union { __IO uint16_t INT_EN_SRC_TRAN; /*!< Source Transaction Complete */ - + struct { __IO uint16_t EN : 8; /*!< interrupt enable */ __IO uint16_t WE : 8; /*!< interrupt enable write enable */ } INT_EN_SRC_TRAN_b; /*!< BitSize */ }; __I uint16_t RESERVED79[3]; - + union { __IO uint16_t INT_EN_DST_TRAN; /*!< Destination Transaction Complete */ - + struct { __IO uint16_t EN : 8; /*!< interrupt enable */ __IO uint16_t WE : 8; /*!< interrupt enable write enable */ } INT_EN_DST_TRAN_b; /*!< BitSize */ }; __I uint16_t RESERVED80[3]; - + union { __IO uint16_t INT_EN_ERR; /*!< Error */ - + struct { __IO uint16_t EN : 8; /*!< interrupt enable */ __IO uint16_t WE : 8; /*!< interrupt enable write enable */ @@ -2524,29 +2524,29 @@ typedef struct { /*!< DMA Structure __I uint8_t RESERVED85[7]; __O uint8_t INT_CLEAR_ERR; /*!< Error */ __I uint8_t RESERVED86[63]; - + union { __IO uint32_t DMA_EN; /*!< DW_ahb_dmac Configuration Register */ - + struct { __IO uint32_t EN : 1; /*!< enable */ } DMA_EN_b; /*!< BitSize */ }; __I uint32_t RESERVED87; - + union { __IO uint32_t CH_EN; /*!< DW_ahb_dmac Channel Enable Register */ - + struct { __IO uint32_t EN : 8; /*!< enable */ __IO uint32_t WE : 8; /*!< enable write enable */ } CH_EN_b; /*!< BitSize */ }; __I uint32_t RESERVED88[10]; - + union { __I uint32_t DMA_COMP_PARAMS_6_HI; /*!< Component Parameters for channel 7 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2569,10 +2569,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_6_HI_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_5_LOW; /*!< Component Parameters for channel 6 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2595,10 +2595,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_5_LOW_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_5_HI; /*!< Component Parameters for channel 5 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2621,10 +2621,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_5_HI_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_4_LOW; /*!< Component Parameters for channel 4 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2647,10 +2647,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_4_LOW_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_4_HI; /*!< Component Parameters for channel 3 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2673,10 +2673,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_4_HI_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_3_LOW; /*!< Component Parameters for channel 2 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2699,10 +2699,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_3_LOW_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_3_HI; /*!< Component Parameters for channel 1 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2725,10 +2725,10 @@ typedef struct { /*!< DMA Structure __I uint32_t FIFO_DEPTH : 3; /*!< FIFO depth in bytes */ } DMA_COMP_PARAMS_3_HI_b; /*!< BitSize */ }; - + union { __I uint32_t DMA_COMP_PARAMS_2_LOW; /*!< Component Parameters for channel 0 */ - + struct { __I uint32_t DTW : 3; /*!< If this is not hardcoded, then software can program the destination transfer width. */ @@ -2752,10 +2752,10 @@ typedef struct { /*!< DMA Structure } DMA_COMP_PARAMS_2_LOW_b; /*!< BitSize */ }; __I uint32_t RESERVED89; - + union { __I uint32_t DMA_COMP_PARAMS_1_LOW; /*!< Maximum block size for channel */ - + struct { __I uint32_t CH0_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 0. */ __I uint32_t CH1_MAX_BLK_SIZE: 4; /*!< Maximum block size for channel 1 */ @@ -2780,10 +2780,10 @@ typedef struct { /*!< DMA Structure */ typedef struct { /*!< ETH Structure */ - + union { __IO uint32_t CONFIG; /*!< MAC Configuration Register */ - + struct { __IO uint32_t PRELEN : 2; /*!< Preamble Length for Transmit frames */ __IO uint32_t RX_EN : 1; /*!< Receiver Enable */ @@ -2813,10 +2813,10 @@ typedef struct { /*!< ETH Structure __IO uint32_t SARC : 3; /*!< Source Address Insertion or Replacement Control */ } CONFIG_b; /*!< BitSize */ }; - + union { __IO uint32_t FF; /*!< MAC Frame Filter */ - + struct { __IO uint32_t PR : 1; /*!< Receive all frames in spite of source and destination address */ __IO uint32_t HUC : 1; /*!< if 1, don't compare DA field in destination address filtering @@ -2843,10 +2843,10 @@ typedef struct { /*!< ETH Structure }; __IO uint32_t HTH; /*!< Hash Table High Register */ __IO uint32_t HTL; /*!< Hash Table Low Register */ - + union { __IO uint32_t GMII_ADDR; /*!< GMII Address Register */ - + struct { __IO uint32_t BUSY : 1; /*!< GMII Busy */ __IO uint32_t GW : 1; /*!< GMII write or read */ @@ -2858,10 +2858,10 @@ typedef struct { /*!< ETH Structure } GMII_ADDR_b; /*!< BitSize */ }; __IO uint32_t GMII_DATA; /*!< GMII Data Register */ - + union { __IO uint32_t FC; /*!< Flow Control Register */ - + struct { __IO uint32_t FCB : 1; /*!< This bit initiates a Pause frame in the full-duplex mode */ __IO uint32_t TFE : 1; /*!< MAC enables the flow control operation to transmit Pause frames */ @@ -2869,10 +2869,10 @@ typedef struct { /*!< ETH Structure __IO uint32_t UP : 1; /*!< MAC can detect Pause frames with unicast address of the station */ } FC_b; /*!< BitSize */ }; - + union { __IO uint32_t VLAN_TAG; /*!< VLAN Tag Register */ - + struct { __IO uint32_t VL : 16; /*!< VLAN Tag Identifier for Receive Frames */ __IO uint32_t ETV : 1; /*!< Enable 12-Bit VLAN Tag Comparison */ @@ -2886,10 +2886,10 @@ typedef struct { /*!< ETH Structure }; __I uint32_t RESERVED0[2]; __IO uint32_t RWUFFR; /*!< Remote Wake-Up Frame Filter Register */ - + union { __IO uint32_t PMTCSR; /*!< PMT Control and Status Register */ - + struct { __IO uint32_t PWRDWN : 1; /*!< Power Down */ __IO uint32_t MGKPKTEN : 1; /*!< Magic Packet Enable */ @@ -2914,10 +2914,10 @@ typedef struct { /*!< ETH Structure __IO uint16_t ADDR0_HIGH; /*!< MAC Address0 High Register */ __I uint16_t RESERVED2; __IO uint32_t ADDR0_LOW; /*!< MAC Address0 LOW Register */ - + union { __IO uint32_t ADDR1_HIGH; /*!< MAC Address0 High Register */ - + struct { __IO uint32_t ADDR : 16; /*!< MAC Address1 [47:32] */ uint32_t : 14; @@ -2928,10 +2928,10 @@ typedef struct { /*!< ETH Structure }; __IO uint32_t ADDR1_LOW; /*!< MAC Address1 LOW Register */ __I uint32_t RESERVED3[44]; - + union { __IO uint32_t MMCCR; /*!< MMC Control Register */ - + struct { __IO uint32_t CNTRST : 1; /*!< Counters Reset */ __IO uint32_t CNTSTOPRO : 1; /*!< Counter Stop Rollover */ @@ -2950,10 +2950,10 @@ typedef struct { /*!< ETH Structure __I uint32_t RESERVED4[59]; __IO uint32_t MMCIRCOIM; /*!< MMC IPC Receive Checksum Offload Interrupt Mask */ __I uint32_t RESERVED5[319]; - + union { __IO uint32_t PTPTSCR; /*!< Timestamp Control Register */ - + struct { __IO uint32_t TSENA : 1; /*!< Timestamp Enable */ __IO uint32_t TSCFUPDT : 1; /*!< Timestamp Fine or Coarse Update */ @@ -2972,10 +2972,10 @@ typedef struct { /*!< ETH Structure __IO uint32_t PTPTTHR; /*!< Target Time Seconds Register */ __IO uint32_t PTPTTLR; /*!< Target Time Nanoseconds Register */ __I uint32_t RESERVED6[567]; - + union { __IO uint32_t BUS_MODE; /*!< Flow Control Register */ - + struct { __IO uint32_t SWR : 1; /*!< Software Reset */ __IO uint32_t DA : 1; /*!< This bit specifies the arbitration scheme between the transmit @@ -3006,10 +3006,10 @@ typedef struct { /*!< ETH Structure __IO uint32_t RPD; /*!< Receive Poll Demand */ __IO uint32_t RDESLA; /*!< Receive Descriptor List Address */ __IO uint32_t TDESLA; /*!< Transmit Descriptor List Address */ - + union { __IO uint32_t STATUS; /*!< Status Register */ - + struct { __IO uint32_t TI : 1; /*!< This bit indicates that the frame transmission is complete */ __IO uint32_t TPS : 1; /*!< Transmit Process Stopped */ @@ -3038,10 +3038,10 @@ typedef struct { /*!< ETH Structure __I uint32_t TTI : 1; /*!< Timestamp Trigger Interrupt */ } STATUS_b; /*!< BitSize */ }; - + union { __IO uint32_t OPERATION; /*!< Operation Mode Register */ - + struct { uint32_t : 1; __IO uint32_t SR : 1; /*!< Start or Stop Receive */ @@ -3063,10 +3063,10 @@ typedef struct { /*!< ETH Structure frame has been written to it, */ } OPERATION_b; /*!< BitSize */ }; - + union { __IO uint32_t INT_EN; /*!< Interrupt Enable Register */ - + struct { __IO uint32_t TIE : 1; /*!< Transmit Interrupt Enable */ __IO uint32_t TSE : 1; /*!< Transmit Stopped Enable */ @@ -3087,10 +3087,10 @@ typedef struct { /*!< ETH Structure } INT_EN_b; /*!< BitSize */ }; __I uint32_t RESERVED7[3]; - + union { __IO uint32_t AHB_STATUS; /*!< AHB Status Register */ - + struct { __IO uint32_t BUSY : 1; /*!< If set, it indicates that the AHB master interface FSMs are in the non-idle state */ @@ -3114,10 +3114,10 @@ typedef struct { /*!< ETH Structure */ typedef struct { /*!< USB Structure */ - + union { __IO uint32_t GOTGCTL; /*!< Control and Status register */ - + struct { __I uint32_t SES_REQ_SCS: 1; /*!< set when a session request initiation is successful as a device */ __IO uint32_t SES_SEQ : 1; /*!< set to initiate a session request on the USB as a device */ @@ -3146,10 +3146,10 @@ typedef struct { /*!< USB Structure __IO uint32_t OTG_VER : 1; /*!< If 0, OTG Version 1.3. If 1, OTG Version 2.0. */ } GOTGCTL_b; /*!< BitSize */ }; - + union { __IO uint32_t GOTGINT; /*!< OTG interrupt Register */ - + struct { uint32_t : 2; __IO uint32_t SES_END_DET: 1; /*!< Set when the utmiotg_bvalid signal is deasserted */ @@ -3162,10 +3162,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DBNCE_DONE : 1; /*!< debounce is completed after the device connect as a host */ } GOTGINT_b; /*!< BitSize */ }; - + union { __IO uint32_t GAHBCFG; /*!< AHB Configuration Register */ - + struct { __IO uint32_t GLBL_INTR_EN: 1; /*!< Global Interrupt Enable */ __IO uint32_t BST_LEN : 4; /*!< Burst Length/Type */ @@ -3178,10 +3178,10 @@ typedef struct { /*!< USB Structure __IO uint32_t AHB_SINGLE : 1; /*!< supports Single transfers for the remaining data in a transfer */ } GAHBCFG_b; /*!< BitSize */ }; - + union { __IO uint32_t GUSBCFG; /*!< USB Configuration Register */ - + struct { uint32_t : 3; __IO uint32_t PHY_IF : 1; /*!< PHY Interface */ @@ -3203,10 +3203,10 @@ typedef struct { /*!< USB Structure __IO uint32_t FORCE_DEVICE_MODE: 1; /*!< Force Device Mode */ } GUSBCFG_b; /*!< BitSize */ }; - + union { __IO uint32_t GRSTCTL; /*!< Reset Register */ - + struct { __IO uint32_t CORE_SOFT_RST: 1; /*!< Core Soft Reset */ uint32_t : 1; @@ -3222,10 +3222,10 @@ typedef struct { /*!< USB Structure __I uint32_t AHB_IDLE : 1; /*!< Indicates that the AHB Master State Machine is in the IDLE condition */ } GRSTCTL_b; /*!< BitSize */ }; - + union { __IO uint32_t GINTSTS; /*!< Interrupt Register */ - + struct { __I uint32_t CUR_MOD : 1; /*!< Current Mode of Operation */ __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch Interrupt */ @@ -3264,10 +3264,10 @@ typedef struct { /*!< USB Structure __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */ } GINTSTS_b; /*!< BitSize */ }; - + union { __IO uint32_t GINTEN; /*!< Interrupt enable Register */ - + struct { uint32_t : 1; __IO uint32_t MODE_MIS : 1; /*!< Mode Mismatch */ @@ -3306,10 +3306,10 @@ typedef struct { /*!< USB Structure __IO uint32_t WAKEUP : 1; /*!< Resume/Remote Wakeup Detected Interrupt */ } GINTEN_b; /*!< BitSize */ }; - + union { __I uint32_t GRXSTSR; /*!< Returns the contents of the top of the Receive FIFO */ - + struct { __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */ __I uint32_t BCNT : 11; /*!< byte count of the received packet */ @@ -3319,10 +3319,10 @@ typedef struct { /*!< USB Structure the packet is received on the USB */ } GRXSTSR_b; /*!< BitSize */ }; - + union { __I uint32_t GRXSTSP; /*!< Pop the contents of the top of the Receive FIFO */ - + struct { __I uint32_t CH_EP_NUM : 4; /*!< channel number as a host or EP number as a device */ __I uint32_t BCNT : 11; /*!< byte count of the received packet */ @@ -3335,10 +3335,10 @@ typedef struct { /*!< USB Structure __IO uint16_t GRXFSIZ; /*!< This value is in terms of 32-bit words, 16 is minimize and 32768 is max */ __I uint16_t RESERVED0; - + union { __IO uint32_t GNPTXFSIZ; /*!< Non-Periodic Transmit FIFO Size Register */ - + struct { __IO uint32_t NTRSA_INEF0TRSA: 16; /*!< start address for Non-periodic Transmit FIFO RAM as a host or IN Endpoint FIFO0 Transmit RAM as a device */ @@ -3347,10 +3347,10 @@ typedef struct { /*!< USB Structure 0 Depth as a device */ } GNPTXFSIZ_b; /*!< BitSize */ }; - + union { __I uint32_t GNPTXSTS; /*!< Non-Periodic Transmit FIFO/Queue Status Register */ - + struct { __I uint32_t NTSA : 16; /*!< the amount of free space available in the Non-periodic TxFIFO, max is 32768. */ @@ -3364,10 +3364,10 @@ typedef struct { /*!< USB Structure } GNPTXSTS_b; /*!< BitSize */ }; __I uint32_t RESERVED1[5]; - + union { __I uint32_t GHWCFG1; /*!< User HW Config1 Register */ - + struct { __I uint32_t EP0_DIR : 2; /*!< Endpoint 0 direction, always Bidirection */ __I uint32_t EP1_DIR : 2; /*!< Endpoint 1 direction */ @@ -3388,18 +3388,18 @@ typedef struct { /*!< USB Structure } GHWCFG1_b; /*!< BitSize */ }; __I uint32_t RESERVED2[3]; - + union { __IO uint32_t GLPMCFG; /*!< Core LPM Configuration Register */ - + struct { __IO uint32_t EP0_DIR : 1; /*!< LPM capability is enabled */ } GLPMCFG_b; /*!< BitSize */ }; - + union { __IO uint32_t GPWRDN; /*!< Global Power Down Register */ - + struct { uint32_t : 1; __IO uint32_t PMU_ACTIVE : 1; /*!< PMU Active is enabled */ @@ -3420,165 +3420,165 @@ typedef struct { /*!< USB Structure __IO uint32_t ADP_INT : 1; /*!< set whenever there is a ADP event */ } GPWRDN_b; /*!< BitSize */ }; - + union { __IO uint32_t GDFIFOCFG; /*!< Global DFIFO Software Config Register */ - + struct { __IO uint32_t GDFIFOCFG : 16; /*!< This field is for dynamic programming of the DFIFO Size. */ __IO uint32_t EPIBA : 16; /*!< This field provides the start address of the EP info controller */ } GDFIFOCFG_b; /*!< BitSize */ }; __I uint32_t RESERVED3[40]; - + union { __IO uint32_t HPTXFSIZ; /*!< Host Periodic Transmit FIFO Size Register */ - + struct { __IO uint32_t HPTSA : 16; /*!< start address of the Periodic TxFIFO */ __IO uint32_t EPIBA : 16; /*!< the size of the Periodic TxFIFO */ } HPTXFSIZ_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF1; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF1_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF2; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF2_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF3; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF3_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF4; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF4_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF5; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF5_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF6; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF6_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF7; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF7_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF8; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF8_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF9; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF9_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF10; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF10_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF11; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF11_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF12; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF12_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF13; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF13_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF14; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF14_b; /*!< BitSize */ }; - + union { __IO uint32_t DIEPTXF15; /*!< Device In Endpoint Transmit FIFO Size Register */ - + struct { __IO uint32_t INEFTRSA : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t INETFD : 16; /*!< IN Endpoint TxFIFO Depth */ } DIEPTXF15_b; /*!< BitSize */ }; __I uint32_t RESERVED4[176]; - + union { __IO uint32_t HCFG; /*!< Host Configuration Register */ - + struct { __IO uint32_t FS_LS_PCS : 2; /*!< FS/LS PHY Clock Select as a host */ __IO uint32_t FS_LS_SUPPORT: 1; /*!< If set, FS/LS-only, even If the connected device can support @@ -3596,19 +3596,19 @@ typedef struct { /*!< USB Structure 00 after Suspend or LPM. */ } HCFG_b; /*!< BitSize */ }; - + union { __IO uint32_t HFIR; /*!< Host Frame Interval Register */ - + struct { __IO uint32_t FI : 16; /*!< IN Endpoint FIFOn Transmit RAM Start Address */ __IO uint32_t RC : 1; /*!< The HFIR can be dynamically reloaded during runtime if set */ } HFIR_b; /*!< BitSize */ }; - + union { __I uint32_t HFNUM; /*!< Host Frame Number/Frame Time Remaining Register */ - + struct { __I uint32_t FN : 16; /*!< This field increments when a new SOF is transmitted on the USB */ __I uint32_t FTR : 16; /*!< amount of time remaining in the current microframe (HS) or Frame @@ -3616,10 +3616,10 @@ typedef struct { /*!< USB Structure } HFNUM_b; /*!< BitSize */ }; __I uint32_t RESERVED5; - + union { __I uint32_t HPTXSTS; /*!< Host Periodic Transmit FIFO/Queue Status Register */ - + struct { __I uint32_t PTDFSA : 16; /*!< Indicates the number of free locations available to be written to in the Periodic TxFIFO, max is 32768 */ @@ -3633,28 +3633,28 @@ typedef struct { /*!< USB Structure __I uint32_t TPTRQ_ODD_FRAME: 1; /*!< If set, send in odd (micro)Frame */ } HPTXSTS_b; /*!< BitSize */ }; - + union { __I uint32_t HAINT; /*!< Host All Channels Interrupt Register */ - + struct { __I uint32_t INT : 16; /*!< Channel Interrupts, from 0 to 15. */ } HAINT_b; /*!< BitSize */ }; - + union { __IO uint32_t HAINT_EN; /*!< Host All Channels Interrupt Enable Register */ - + struct { __IO uint32_t EN : 16; /*!< Channel Interrupts Enable, from 0 to 15. */ } HAINT_EN_b; /*!< BitSize */ }; __IO uint32_t HFLBA; /*!< The starting address of the Frame list */ __I uint32_t RESERVED6[8]; - + union { __IO uint32_t __HPRT; /*!< Host Port Control and Status Register */ - + struct { __I uint32_t PCS : 1; /*!< If a device is attached to the port */ __IO uint32_t PCD : 1; /*!< A device connection is detected */ @@ -3678,10 +3678,10 @@ typedef struct { /*!< USB Structure } __HPRT_b; /*!< BitSize */ }; __I uint32_t RESERVED7[47]; - + union { __IO uint32_t HCC0; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -3700,10 +3700,10 @@ typedef struct { /*!< USB Structure } HCC0_b; /*!< BitSize */ }; __I uint32_t RESERVED8; - + union { __IO uint32_t HCINT0; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3715,10 +3715,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT0_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN0; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3730,10 +3730,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN0_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ0; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -3744,10 +3744,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ0_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA0; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -3756,10 +3756,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED9; __IO uint32_t HCDMAB0; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC1; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -3778,10 +3778,10 @@ typedef struct { /*!< USB Structure } HCC1_b; /*!< BitSize */ }; __I uint32_t RESERVED10; - + union { __IO uint32_t HCINT1; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3793,10 +3793,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT1_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN1; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3808,10 +3808,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN1_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ1; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -3822,10 +3822,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ1_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA1; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -3834,10 +3834,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED11; __IO uint32_t HCDMAB1; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC2; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -3856,10 +3856,10 @@ typedef struct { /*!< USB Structure } HCC2_b; /*!< BitSize */ }; __I uint32_t RESERVED12; - + union { __IO uint32_t HCINT2; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3871,10 +3871,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT2_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN2; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3886,10 +3886,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN2_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ2; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -3900,10 +3900,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ2_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA2; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -3912,10 +3912,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED13; __IO uint32_t HCDMAB2; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC3; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -3934,10 +3934,10 @@ typedef struct { /*!< USB Structure } HCC3_b; /*!< BitSize */ }; __I uint32_t RESERVED14; - + union { __IO uint32_t HCINT3; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3949,10 +3949,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT3_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN3; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -3964,10 +3964,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN3_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ3; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -3978,10 +3978,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ3_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA3; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -3990,10 +3990,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED15; __IO uint32_t HCDMAB3; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC4; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4012,10 +4012,10 @@ typedef struct { /*!< USB Structure } HCC4_b; /*!< BitSize */ }; __I uint32_t RESERVED16; - + union { __IO uint32_t HCINT4; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4027,10 +4027,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT4_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN4; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4042,10 +4042,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN4_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ4; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4056,10 +4056,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ4_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA4; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4068,10 +4068,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED17; __IO uint32_t HCDMAB4; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC5; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4090,10 +4090,10 @@ typedef struct { /*!< USB Structure } HCC5_b; /*!< BitSize */ }; __I uint32_t RESERVED18; - + union { __IO uint32_t HCINT5; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4105,10 +4105,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT5_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN5; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4120,10 +4120,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN5_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ5; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4134,10 +4134,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ5_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA5; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4146,10 +4146,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED19; __IO uint32_t HCDMAB5; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC6; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4168,10 +4168,10 @@ typedef struct { /*!< USB Structure } HCC6_b; /*!< BitSize */ }; __I uint32_t RESERVED20; - + union { __IO uint32_t HCINT6; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4183,10 +4183,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT6_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN6; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4198,10 +4198,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN6_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ6; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4212,10 +4212,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ6_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA6; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4224,10 +4224,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED21; __IO uint32_t HCDMAB6; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC7; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4246,10 +4246,10 @@ typedef struct { /*!< USB Structure } HCC7_b; /*!< BitSize */ }; __I uint32_t RESERVED22; - + union { __IO uint32_t HCINT7; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4261,10 +4261,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT7_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN7; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4276,10 +4276,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN7_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ7; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4290,10 +4290,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ7_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA7; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4302,10 +4302,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED23; __IO uint32_t HCDMAB7; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC8; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4324,10 +4324,10 @@ typedef struct { /*!< USB Structure } HCC8_b; /*!< BitSize */ }; __I uint32_t RESERVED24; - + union { __IO uint32_t HCINT8; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4339,10 +4339,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT8_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN8; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4354,10 +4354,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN8_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ8; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4368,10 +4368,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ8_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA8; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4380,10 +4380,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED25; __IO uint32_t HCDMAB8; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC9; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4402,10 +4402,10 @@ typedef struct { /*!< USB Structure } HCC9_b; /*!< BitSize */ }; __I uint32_t RESERVED26; - + union { __IO uint32_t HCINT9; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4417,10 +4417,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT9_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN9; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4432,10 +4432,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN9_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ9; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4446,10 +4446,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ9_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA9; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4458,10 +4458,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED27; __IO uint32_t HCDMAB9; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC10; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4480,10 +4480,10 @@ typedef struct { /*!< USB Structure } HCC10_b; /*!< BitSize */ }; __I uint32_t RESERVED28; - + union { __IO uint32_t HCINT10; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4495,10 +4495,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT10_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN10; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4510,10 +4510,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN10_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ10; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4524,10 +4524,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ10_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA10; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4536,10 +4536,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED29; __IO uint32_t HCDMAB10; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC11; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4558,10 +4558,10 @@ typedef struct { /*!< USB Structure } HCC11_b; /*!< BitSize */ }; __I uint32_t RESERVED30; - + union { __IO uint32_t HCINT11; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4573,10 +4573,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT11_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN11; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4588,10 +4588,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN11_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ11; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4602,10 +4602,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ11_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA11; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4614,10 +4614,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED31; __IO uint32_t HCDMAB11; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC12; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4636,10 +4636,10 @@ typedef struct { /*!< USB Structure } HCC12_b; /*!< BitSize */ }; __I uint32_t RESERVED32; - + union { __IO uint32_t HCINT12; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4651,10 +4651,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT12_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN12; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4666,10 +4666,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN12_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ12; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4680,10 +4680,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ12_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA12; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4692,10 +4692,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED33; __IO uint32_t HCDMAB12; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC13; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4714,10 +4714,10 @@ typedef struct { /*!< USB Structure } HCC13_b; /*!< BitSize */ }; __I uint32_t RESERVED34; - + union { __IO uint32_t HCINT13; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4729,10 +4729,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT13_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN13; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4744,10 +4744,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN13_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ13; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4758,10 +4758,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ13_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA13; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4770,10 +4770,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED35; __IO uint32_t HCDMAB13; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC14; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4792,10 +4792,10 @@ typedef struct { /*!< USB Structure } HCC14_b; /*!< BitSize */ }; __I uint32_t RESERVED36; - + union { __IO uint32_t HCINT14; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4807,10 +4807,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT14_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN14; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4822,10 +4822,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN14_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ14; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4836,10 +4836,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ14_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA14; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4848,10 +4848,10 @@ typedef struct { /*!< USB Structure }; __I uint32_t RESERVED37; __IO uint32_t HCDMAB14; /*!< Host Channel-n DMA Buffer Address Register */ - + union { __IO uint32_t HCC15; /*!< Host Channel Characteristics Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ __IO uint32_t EP_NUM : 4; /*!< Indicates the endpoint number on the device serving as the data @@ -4870,10 +4870,10 @@ typedef struct { /*!< USB Structure } HCC15_b; /*!< BitSize */ }; __I uint32_t RESERVED38; - + union { __IO uint32_t HCINT15; /*!< Host Channel Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4885,10 +4885,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT15_b; /*!< BitSize */ }; - + union { __IO uint32_t HCINT_EN15; /*!< Host Channel Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t CH_HALT : 1; /*!< Indicates the endpoint number on the device serving as the data @@ -4900,10 +4900,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DR : 1; /*!< the corresponding channel's descriptor list rolls over */ } HCINT_EN15_b; /*!< BitSize */ }; - + union { __IO uint32_t HCTSIZ15; /*!< Host Channel Transfer Size Register */ - + struct { __IO uint32_t SCHED_INFO : 8; /*!< Every bit in this 8 bit register indicates scheduling for that microframe.Bit N indicates scheduling for Nth microframe scheduling @@ -4914,10 +4914,10 @@ typedef struct { /*!< USB Structure __IO uint32_t PING : 1; /*!< Setting this field to 1 directs the host to do PING protocol */ } HCTSIZ15_b; /*!< BitSize */ }; - + union { __IO uint32_t HCDMA15; /*!< Host Channel-n DMA Address Register */ - + struct { uint32_t : 3; __IO uint32_t CTD : 6; /*!< Number of Transfer Descriptors for Non-Isochronous */ @@ -4927,10 +4927,10 @@ typedef struct { /*!< USB Structure __I uint32_t RESERVED39; __IO uint32_t HCDMAB15; /*!< Host Channel-n DMA Buffer Address Register */ __I uint32_t RESERVED40[64]; - + union { __IO uint32_t DCFG; /*!< Device Configuration Register */ - + struct { __IO uint32_t DSPEED : 2; /*!< the maximum speed the application can support */ __IO uint32_t NZLSOH : 1; /*!< select the handshake the core sends on receiving a non zero-length @@ -4948,10 +4948,10 @@ typedef struct { /*!< USB Structure __IO uint32_t RVP : 6; /*!< It controls the resume period when the core resumes from suspend */ } DCFG_b; /*!< BitSize */ }; - + union { __IO uint32_t DCTL; /*!< Device Control Register */ - + struct { __IO uint32_t RWS : 1; /*!< If set, the core initiates remote signaling to wake the USB hosts */ @@ -4974,10 +4974,10 @@ typedef struct { /*!< USB Structure __IO uint32_t ECBNA : 1; /*!< After receiving BNA interrupt, the core disables the endpoint */ } DCTL_b; /*!< BitSize */ }; - + union { __I uint32_t DSTS; /*!< Device Status Register */ - + struct { __I uint32_t SUSPEND : 1; /*!< this bit is set as long as a Suspend condition is detected on the USB */ @@ -4991,10 +4991,10 @@ typedef struct { /*!< USB Structure } DSTS_b; /*!< BitSize */ }; __I uint32_t RESERVED41; - + union { __IO uint32_t DIEPEN; /*!< Device IN Endpoint Common Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */ __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */ @@ -5010,10 +5010,10 @@ typedef struct { /*!< USB Structure __IO uint32_t NAK : 1; /*!< NAK interrupt */ } DIEPEN_b; /*!< BitSize */ }; - + union { __IO uint32_t DOEPEN; /*!< Device OUT Endpoint Common Interrupt Enable Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer Completed Interrupt */ __IO uint32_t ED : 1; /*!< Endpoint Disabled Interrupt */ @@ -5033,29 +5033,29 @@ typedef struct { /*!< USB Structure __IO uint32_t NYET : 1; /*!< NYET interrupt */ } DOEPEN_b; /*!< BitSize */ }; - + union { __I uint32_t DAINT; /*!< Device All Channels Interrupt Register */ - + struct { __I uint32_t INT : 16; /*!< IN Endpoint Interrupt Bits, from 0 to 15. */ __I uint32_t OUT_INT : 16; /*!< OUT Endpoint Interrupt Bits, from 0 to 15. */ } DAINT_b; /*!< BitSize */ }; - + union { __IO uint32_t DAINT_EN; /*!< Device All Channels Interrupt Enable Register */ - + struct { __IO uint32_t IN_EN : 16; /*!< IN EP Interrupt Enable, from 0 to 15. */ __IO uint32_t OUT_EN : 16; /*!< OUT EP Interrupt Enable, from 0 to 15. */ } DAINT_EN_b; /*!< BitSize */ }; __I uint32_t RESERVED42[4]; - + union { __IO uint32_t DTHRCTL; /*!< Device Threshold Control Register */ - + struct { __IO uint32_t NISOINETE : 1; /*!< Non-ISO IN Endpoints Threshold Enable */ __IO uint32_t ISOINETE : 1; /*!< ISO IN Endpoints Threshold Enable */ @@ -5071,10 +5071,10 @@ typedef struct { /*!< USB Structure }; __IO uint16_t DIEPEMPEN; /*!< Device IN Endpoint FIFO Empty Interrupt Enable Register */ __I uint16_t RESERVED43[101]; - + union { __IO uint32_t DIEPCTL0; /*!< Device Control IN Endpoint 0 Control Register */ - + struct { __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint, applies to IN and OUT endpoints */ @@ -5098,10 +5098,10 @@ typedef struct { /*!< USB Structure } DIEPCTL0_b; /*!< BitSize */ }; __I uint32_t RESERVED44; - + union { __IO uint32_t DIEPINT0; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5121,10 +5121,10 @@ typedef struct { /*!< USB Structure } DIEPINT0_b; /*!< BitSize */ }; __I uint32_t RESERVED45; - + union { __IO uint32_t DIEPTSIZ0; /*!< Device IN Endpoint 0 Transfer Size Register */ - + struct { __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */ uint32_t : 12; @@ -5135,10 +5135,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA0; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED46; __I uint32_t DIEPDMAB0; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL1; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5162,10 +5162,10 @@ typedef struct { /*!< USB Structure } DIEPCTL1_b; /*!< BitSize */ }; __I uint32_t RESERVED47; - + union { __IO uint32_t DIEPINT1; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5185,10 +5185,10 @@ typedef struct { /*!< USB Structure } DIEPINT1_b; /*!< BitSize */ }; __I uint32_t RESERVED48; - + union { __IO uint32_t DIEPTSIZ1; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5200,10 +5200,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA1; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED49; __I uint32_t DIEPDMAB1; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL2; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5227,10 +5227,10 @@ typedef struct { /*!< USB Structure } DIEPCTL2_b; /*!< BitSize */ }; __I uint32_t RESERVED50; - + union { __IO uint32_t DIEPINT2; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5250,10 +5250,10 @@ typedef struct { /*!< USB Structure } DIEPINT2_b; /*!< BitSize */ }; __I uint32_t RESERVED51; - + union { __IO uint32_t DIEPTSIZ2; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5265,10 +5265,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA2; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED52; __I uint32_t DIEPDMAB2; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL3; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5292,10 +5292,10 @@ typedef struct { /*!< USB Structure } DIEPCTL3_b; /*!< BitSize */ }; __I uint32_t RESERVED53; - + union { __IO uint32_t DIEPINT3; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5315,10 +5315,10 @@ typedef struct { /*!< USB Structure } DIEPINT3_b; /*!< BitSize */ }; __I uint32_t RESERVED54; - + union { __IO uint32_t DIEPTSIZ3; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5330,10 +5330,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA3; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED55; __I uint32_t DIEPDMAB3; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL4; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5357,10 +5357,10 @@ typedef struct { /*!< USB Structure } DIEPCTL4_b; /*!< BitSize */ }; __I uint32_t RESERVED56; - + union { __IO uint32_t DIEPINT4; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5380,10 +5380,10 @@ typedef struct { /*!< USB Structure } DIEPINT4_b; /*!< BitSize */ }; __I uint32_t RESERVED57; - + union { __IO uint32_t DIEPTSIZ4; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5395,10 +5395,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA4; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED58; __I uint32_t DIEPDMAB4; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL5; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5422,10 +5422,10 @@ typedef struct { /*!< USB Structure } DIEPCTL5_b; /*!< BitSize */ }; __I uint32_t RESERVED59; - + union { __IO uint32_t DIEPINT5; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5445,10 +5445,10 @@ typedef struct { /*!< USB Structure } DIEPINT5_b; /*!< BitSize */ }; __I uint32_t RESERVED60; - + union { __IO uint32_t DIEPTSIZ5; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5460,10 +5460,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA5; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED61; __I uint32_t DIEPDMAB5; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL6; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5487,10 +5487,10 @@ typedef struct { /*!< USB Structure } DIEPCTL6_b; /*!< BitSize */ }; __I uint32_t RESERVED62; - + union { __IO uint32_t DIEPINT6; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5510,10 +5510,10 @@ typedef struct { /*!< USB Structure } DIEPINT6_b; /*!< BitSize */ }; __I uint32_t RESERVED63; - + union { __IO uint32_t DIEPTSIZ6; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5525,10 +5525,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA6; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED64; __I uint32_t DIEPDMAB6; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL7; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5552,10 +5552,10 @@ typedef struct { /*!< USB Structure } DIEPCTL7_b; /*!< BitSize */ }; __I uint32_t RESERVED65; - + union { __IO uint32_t DIEPINT7; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5575,10 +5575,10 @@ typedef struct { /*!< USB Structure } DIEPINT7_b; /*!< BitSize */ }; __I uint32_t RESERVED66; - + union { __IO uint32_t DIEPTSIZ7; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5590,10 +5590,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA7; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED67; __I uint32_t DIEPDMAB7; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL8; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5617,10 +5617,10 @@ typedef struct { /*!< USB Structure } DIEPCTL8_b; /*!< BitSize */ }; __I uint32_t RESERVED68; - + union { __IO uint32_t DIEPINT8; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5640,10 +5640,10 @@ typedef struct { /*!< USB Structure } DIEPINT8_b; /*!< BitSize */ }; __I uint32_t RESERVED69; - + union { __IO uint32_t DIEPTSIZ8; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5655,10 +5655,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA8; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED70; __I uint32_t DIEPDMAB8; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL9; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5682,10 +5682,10 @@ typedef struct { /*!< USB Structure } DIEPCTL9_b; /*!< BitSize */ }; __I uint32_t RESERVED71; - + union { __IO uint32_t DIEPINT9; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5705,10 +5705,10 @@ typedef struct { /*!< USB Structure } DIEPINT9_b; /*!< BitSize */ }; __I uint32_t RESERVED72; - + union { __IO uint32_t DIEPTSIZ9; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5720,10 +5720,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA9; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED73; __I uint32_t DIEPDMAB9; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL10; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5747,10 +5747,10 @@ typedef struct { /*!< USB Structure } DIEPCTL10_b; /*!< BitSize */ }; __I uint32_t RESERVED74; - + union { __IO uint32_t DIEPINT10; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5770,10 +5770,10 @@ typedef struct { /*!< USB Structure } DIEPINT10_b; /*!< BitSize */ }; __I uint32_t RESERVED75; - + union { __IO uint32_t DIEPTSIZ10; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5785,10 +5785,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA10; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED76; __I uint32_t DIEPDMAB10; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL11; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5812,10 +5812,10 @@ typedef struct { /*!< USB Structure } DIEPCTL11_b; /*!< BitSize */ }; __I uint32_t RESERVED77; - + union { __IO uint32_t DIEPINT11; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5835,10 +5835,10 @@ typedef struct { /*!< USB Structure } DIEPINT11_b; /*!< BitSize */ }; __I uint32_t RESERVED78; - + union { __IO uint32_t DIEPTSIZ11; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5850,10 +5850,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA11; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED79; __I uint32_t DIEPDMAB11; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL12; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5877,10 +5877,10 @@ typedef struct { /*!< USB Structure } DIEPCTL12_b; /*!< BitSize */ }; __I uint32_t RESERVED80; - + union { __IO uint32_t DIEPINT12; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5900,10 +5900,10 @@ typedef struct { /*!< USB Structure } DIEPINT12_b; /*!< BitSize */ }; __I uint32_t RESERVED81; - + union { __IO uint32_t DIEPTSIZ12; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5915,10 +5915,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA12; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED82; __I uint32_t DIEPDMAB12; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL13; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -5942,10 +5942,10 @@ typedef struct { /*!< USB Structure } DIEPCTL13_b; /*!< BitSize */ }; __I uint32_t RESERVED83; - + union { __IO uint32_t DIEPINT13; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -5965,10 +5965,10 @@ typedef struct { /*!< USB Structure } DIEPINT13_b; /*!< BitSize */ }; __I uint32_t RESERVED84; - + union { __IO uint32_t DIEPTSIZ13; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -5980,10 +5980,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA13; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED85; __I uint32_t DIEPDMAB13; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL14; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6007,10 +6007,10 @@ typedef struct { /*!< USB Structure } DIEPCTL14_b; /*!< BitSize */ }; __I uint32_t RESERVED86; - + union { __IO uint32_t DIEPINT14; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6030,10 +6030,10 @@ typedef struct { /*!< USB Structure } DIEPINT14_b; /*!< BitSize */ }; __I uint32_t RESERVED87; - + union { __IO uint32_t DIEPTSIZ14; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6045,10 +6045,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA14; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED88; __I uint32_t DIEPDMAB14; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DIEPCTL15; /*!< Device IN Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6072,10 +6072,10 @@ typedef struct { /*!< USB Structure } DIEPCTL15_b; /*!< BitSize */ }; __I uint32_t RESERVED89; - + union { __IO uint32_t DIEPINT15; /*!< Device IN Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6095,10 +6095,10 @@ typedef struct { /*!< USB Structure } DIEPINT15_b; /*!< BitSize */ }; __I uint32_t RESERVED90; - + union { __IO uint32_t DIEPTSIZ15; /*!< Device IN Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6110,10 +6110,10 @@ typedef struct { /*!< USB Structure __IO uint16_t DTXFSA15; /*!< Device IN Endpoint-n Transmit FIFO Space Avail Register */ __I uint16_t RESERVED91; __I uint32_t DIEPDMAB15; /*!< Device IN Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL0; /*!< Device Control OUT Endpoint 0 Control Register */ - + struct { __IO uint32_t MPS : 2; /*!< Indicates the maximum packet size of the associated endpoint, applies to IN and OUT endpoints */ @@ -6136,10 +6136,10 @@ typedef struct { /*!< USB Structure } DOEPCTL0_b; /*!< BitSize */ }; __I uint32_t RESERVED92; - + union { __IO uint32_t DOEPINT0; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6161,10 +6161,10 @@ typedef struct { /*!< USB Structure } DOEPINT0_b; /*!< BitSize */ }; __I uint32_t RESERVED93; - + union { __IO uint32_t DOEPTSIZ0; /*!< Device OUT Endpoint 0 Transfer Size Register */ - + struct { __IO uint32_t SIZE : 7; /*!< Indicates the transfer size in bytes for endpoint 0 */ uint32_t : 12; @@ -6178,10 +6178,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA0; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED94; __I uint32_t DOEPDMAB0; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL1; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6205,10 +6205,10 @@ typedef struct { /*!< USB Structure } DOEPCTL1_b; /*!< BitSize */ }; __I uint32_t RESERVED95; - + union { __IO uint32_t DOEPINT1; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6230,10 +6230,10 @@ typedef struct { /*!< USB Structure } DOEPINT1_b; /*!< BitSize */ }; __I uint32_t RESERVED96; - + union { __IO uint32_t DOEPTSIZ1; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6245,10 +6245,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA1; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED97; __I uint32_t DOEPDMAB1; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL2; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6272,10 +6272,10 @@ typedef struct { /*!< USB Structure } DOEPCTL2_b; /*!< BitSize */ }; __I uint32_t RESERVED98; - + union { __IO uint32_t DOEPINT2; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6297,10 +6297,10 @@ typedef struct { /*!< USB Structure } DOEPINT2_b; /*!< BitSize */ }; __I uint32_t RESERVED99; - + union { __IO uint32_t DOEPTSIZ2; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6312,10 +6312,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA2; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED100; __I uint32_t DOEPDMAB2; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL3; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6339,10 +6339,10 @@ typedef struct { /*!< USB Structure } DOEPCTL3_b; /*!< BitSize */ }; __I uint32_t RESERVED101; - + union { __IO uint32_t DOEPINT3; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6364,10 +6364,10 @@ typedef struct { /*!< USB Structure } DOEPINT3_b; /*!< BitSize */ }; __I uint32_t RESERVED102; - + union { __IO uint32_t DOEPTSIZ3; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6379,10 +6379,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA3; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED103; __I uint32_t DOEPDMAB3; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL4; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6406,10 +6406,10 @@ typedef struct { /*!< USB Structure } DOEPCTL4_b; /*!< BitSize */ }; __I uint32_t RESERVED104; - + union { __IO uint32_t DOEPINT4; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6431,10 +6431,10 @@ typedef struct { /*!< USB Structure } DOEPINT4_b; /*!< BitSize */ }; __I uint32_t RESERVED105; - + union { __IO uint32_t DOEPTSIZ4; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6446,10 +6446,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA4; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED106; __I uint32_t DOEPDMAB4; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL5; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6473,10 +6473,10 @@ typedef struct { /*!< USB Structure } DOEPCTL5_b; /*!< BitSize */ }; __I uint32_t RESERVED107; - + union { __IO uint32_t DOEPINT5; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6498,10 +6498,10 @@ typedef struct { /*!< USB Structure } DOEPINT5_b; /*!< BitSize */ }; __I uint32_t RESERVED108; - + union { __IO uint32_t DOEPTSIZ5; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6513,10 +6513,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA5; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED109; __I uint32_t DOEPDMAB5; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL6; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6540,10 +6540,10 @@ typedef struct { /*!< USB Structure } DOEPCTL6_b; /*!< BitSize */ }; __I uint32_t RESERVED110; - + union { __IO uint32_t DOEPINT6; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6565,10 +6565,10 @@ typedef struct { /*!< USB Structure } DOEPINT6_b; /*!< BitSize */ }; __I uint32_t RESERVED111; - + union { __IO uint32_t DOEPTSIZ6; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6580,10 +6580,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA6; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED112; __I uint32_t DOEPDMAB6; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL7; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6607,10 +6607,10 @@ typedef struct { /*!< USB Structure } DOEPCTL7_b; /*!< BitSize */ }; __I uint32_t RESERVED113; - + union { __IO uint32_t DOEPINT7; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6632,10 +6632,10 @@ typedef struct { /*!< USB Structure } DOEPINT7_b; /*!< BitSize */ }; __I uint32_t RESERVED114; - + union { __IO uint32_t DOEPTSIZ7; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6647,10 +6647,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA7; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED115; __I uint32_t DOEPDMAB7; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL8; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6674,10 +6674,10 @@ typedef struct { /*!< USB Structure } DOEPCTL8_b; /*!< BitSize */ }; __I uint32_t RESERVED116; - + union { __IO uint32_t DOEPINT8; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6699,10 +6699,10 @@ typedef struct { /*!< USB Structure } DOEPINT8_b; /*!< BitSize */ }; __I uint32_t RESERVED117; - + union { __IO uint32_t DOEPTSIZ8; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6714,10 +6714,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA8; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED118; __I uint32_t DOEPDMAB8; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL9; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6741,10 +6741,10 @@ typedef struct { /*!< USB Structure } DOEPCTL9_b; /*!< BitSize */ }; __I uint32_t RESERVED119; - + union { __IO uint32_t DOEPINT9; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6766,10 +6766,10 @@ typedef struct { /*!< USB Structure } DOEPINT9_b; /*!< BitSize */ }; __I uint32_t RESERVED120; - + union { __IO uint32_t DOEPTSIZ9; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6781,10 +6781,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA9; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED121; __I uint32_t DOEPDMAB9; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL10; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6808,10 +6808,10 @@ typedef struct { /*!< USB Structure } DOEPCTL10_b; /*!< BitSize */ }; __I uint32_t RESERVED122; - + union { __IO uint32_t DOEPINT10; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6833,10 +6833,10 @@ typedef struct { /*!< USB Structure } DOEPINT10_b; /*!< BitSize */ }; __I uint32_t RESERVED123; - + union { __IO uint32_t DOEPTSIZ10; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6848,10 +6848,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA10; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED124; __I uint32_t DOEPDMAB10; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL11; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6875,10 +6875,10 @@ typedef struct { /*!< USB Structure } DOEPCTL11_b; /*!< BitSize */ }; __I uint32_t RESERVED125; - + union { __IO uint32_t DOEPINT11; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6900,10 +6900,10 @@ typedef struct { /*!< USB Structure } DOEPINT11_b; /*!< BitSize */ }; __I uint32_t RESERVED126; - + union { __IO uint32_t DOEPTSIZ11; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6915,10 +6915,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA11; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED127; __I uint32_t DOEPDMAB11; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL12; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -6942,10 +6942,10 @@ typedef struct { /*!< USB Structure } DOEPCTL12_b; /*!< BitSize */ }; __I uint32_t RESERVED128; - + union { __IO uint32_t DOEPINT12; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -6967,10 +6967,10 @@ typedef struct { /*!< USB Structure } DOEPINT12_b; /*!< BitSize */ }; __I uint32_t RESERVED129; - + union { __IO uint32_t DOEPTSIZ12; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -6982,10 +6982,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA12; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED130; __I uint32_t DOEPDMAB12; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL13; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -7009,10 +7009,10 @@ typedef struct { /*!< USB Structure } DOEPCTL13_b; /*!< BitSize */ }; __I uint32_t RESERVED131; - + union { __IO uint32_t DOEPINT13; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -7034,10 +7034,10 @@ typedef struct { /*!< USB Structure } DOEPINT13_b; /*!< BitSize */ }; __I uint32_t RESERVED132; - + union { __IO uint32_t DOEPTSIZ13; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -7049,10 +7049,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA13; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED133; __I uint32_t DOEPDMAB13; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL14; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -7076,10 +7076,10 @@ typedef struct { /*!< USB Structure } DOEPCTL14_b; /*!< BitSize */ }; __I uint32_t RESERVED134; - + union { __IO uint32_t DOEPINT14; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -7101,10 +7101,10 @@ typedef struct { /*!< USB Structure } DOEPINT14_b; /*!< BitSize */ }; __I uint32_t RESERVED135; - + union { __IO uint32_t DOEPTSIZ14; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -7116,10 +7116,10 @@ typedef struct { /*!< USB Structure __IO uint32_t DOEPDMA14; /*!< Device OUT Endpoint-n DMA Address Register */ __I uint32_t RESERVED136; __I uint32_t DOEPDMAB14; /*!< Device OUT Endpoint-n DMA Buffer Address Register */ - + union { __IO uint32_t DOEPCTL15; /*!< Device OUT Endpoint N Control Register */ - + struct { __IO uint32_t MPS : 11; /*!< Indicates the maximum packet size of the associated endpoint */ uint32_t : 4; @@ -7143,10 +7143,10 @@ typedef struct { /*!< USB Structure } DOEPCTL15_b; /*!< BitSize */ }; __I uint32_t RESERVED137; - + union { __IO uint32_t DOEPINT15; /*!< Device OUT Endpoint-n Interrupt Register */ - + struct { __IO uint32_t TC : 1; /*!< Transfer completed normally without any errors */ __IO uint32_t EPD : 1; /*!< Endpoint Disabled Interrupt */ @@ -7168,10 +7168,10 @@ typedef struct { /*!< USB Structure } DOEPINT15_b; /*!< BitSize */ }; __I uint32_t RESERVED138; - + union { __IO uint32_t DOEPTSIZ15; /*!< Device OUT Endpoint-n Transfer Size Register */ - + struct { __IO uint32_t SIZE : 19; /*!< Indicates the transfer size in bytes for endpoint 0 */ __IO uint32_t PACKET_CNT : 10; /*!< the total number of USB packets */ @@ -7196,10 +7196,10 @@ typedef struct { /*!< USB Structure */ typedef struct { /*!< GLOBAL_CTRL Structure */ - + union { __I uint32_t AES_STATUS; /*!< AES status */ - + struct { __I uint32_t RD_ALMOST_EMPTY: 1; /*!< FIFO read almost empty */ __I uint32_t RD_EMPTY : 1; /*!< FIFO read empty */ @@ -7209,10 +7209,10 @@ typedef struct { /*!< GLOBAL_CTRL Structure } AES_STATUS_b; /*!< BitSize */ }; __I uint32_t RESERVED0[253]; - + union { __IO uint32_t CLK_SEL_0; /*!< clock select 0 */ - + struct { __IO uint32_t CAN1_CLK : 2; /*!< CAN1 clock frequency dividor based on system clock, which should be 1/32, 1/4, 1/8, 1/16 from 0 to 3 */ @@ -7247,10 +7247,10 @@ typedef struct { /*!< GLOBAL_CTRL Structure should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ } CLK_SEL_0_b; /*!< BitSize */ }; - + union { __IO uint32_t CLK_SEL_1; /*!< clock select 1 */ - + struct { __IO uint32_t ETH_AHB_CLK: 2; /*!< ETH_AHB clock frequency dividor based on system clock, which should be 1/1, 1/2, 1/4, 1/8 from 0 to 3 */ @@ -7269,10 +7269,10 @@ typedef struct { /*!< GLOBAL_CTRL Structure __IO uint32_t UTMI_CLK : 1; /*!< UTMI clock came from on-chip usb phy(0) or off-chip usb phy(1) */ } CLK_SEL_1_b; /*!< BitSize */ }; - + union { __IO uint32_t USB_PHY_CTRL; /*!< USB Phy Control Register */ - + struct { __IO uint32_t BITSTUFF : 1; /*!< 0: No bit stuff */ __IO uint32_t XTLSEL : 1; /*!< 0: 12MHz */ @@ -7288,39 +7288,39 @@ typedef struct { /*!< GLOBAL_CTRL Structure __IO uint32_t RSTPRT : 1; /*!< 0: The reverse of usb_rst_n will reset, 1: Reset OTG PHY */ } USB_PHY_CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t RTC_INT_EN; /*!< RTC interrupt enable Register */ - + struct { __IO uint32_t SECOND : 1; /*!< 1s interrupt enable */ __IO uint32_t MILLSECOND : 1; /*!< 1ms interrupt enable */ } RTC_INT_EN_b; /*!< BitSize */ }; __I uint32_t RESERVED1; - + union { __IO uint32_t NMI_SEL; /*!< nmi interrupt selection */ - + struct { __IO uint32_t NMI : 7; /*!< NMI interrupt ID */ } NMI_SEL_b; /*!< BitSize */ }; __I uint32_t RESERVED2; __IO uint32_t AES_TARGET_ADDR; /*!< AES target address, default is frame decoder address(0x41800000) */ - + union { __IO uint32_t AES_BURST_TYPE; /*!< AES burst type */ - + struct { __IO uint32_t TYPE : 2; /*!< burst type, fixed(0), incr(1) */ } AES_BURST_TYPE_b; /*!< BitSize */ }; __I uint32_t RESERVED3[3]; - + union { __IO uint32_t ICACHE; /*!< ICACHE Enable */ - + struct { __IO uint32_t EN : 1; /*!< ICACHE Enable */ } ICACHE_b; /*!< BitSize */ @@ -7342,10 +7342,10 @@ typedef struct { /*!< GLOBAL_CTRL Structure typedef struct { /*!< AES Structure */ __IO uint32_t FIFO; /*!< data FIFO to be decoded */ - + union { __O uint32_t FIFO_CLEAR; /*!< clear data FIFO */ - + struct { __O uint32_t CLEAR : 1; /*!< clear after write 1 and write 0 */ } FIFO_CLEAR_b; /*!< BitSize */ @@ -7364,20 +7364,20 @@ typedef struct { /*!< AES Structure typedef struct { /*!< DDRC Structure */ __IO uint32_t CMD; /*!< DDR commands to program */ - + union { __IO uint32_t CTRL; /*!< DDR Control */ - + struct { __IO uint32_t TO : 1; /*!< Take over DDRC siggen */ __IO uint32_t CLR : 1; /*!< Clear commands in FIFO */ __O uint32_t STR : 1; /*!< Start to execute the commands in FIFO */ } CTRL_b; /*!< BitSize */ }; - + union { __IO uint32_t MODE; /*!< DDR mode */ - + struct { __IO uint32_t MODE : 6; /*!< DDRC Mode */ uint32_t : 2; @@ -7390,18 +7390,18 @@ typedef struct { /*!< DDRC Structure __IO uint32_t CLKPOL : 2; /*!< DQS clkpol set by user on the PHY */ } MODE_b; /*!< BitSize */ }; - + union { __IO uint32_t QUE; /*!< DDRC queue depth */ - + struct { __IO uint32_t DEPTH : 1; /*!< DDRC queue depth */ } QUE_b; /*!< BitSize */ }; - + union { __IO uint32_t REF; /*!< Refresh control */ - + struct { __IO uint32_t THRD : 5; /*!< Number of refresh requests which can be postponed */ uint32_t : 3; @@ -7410,266 +7410,266 @@ typedef struct { /*!< DDRC Structure __IO uint32_t TIME : 16; /*!< Refresh interval time */ } REF_b; /*!< BitSize */ }; - + union { __O uint32_t REF_TRIG; /*!< Refresh trigger */ - + struct { __O uint32_t GO : 1; /*!< Write 1 to trigger one refresh request by cbus */ } REF_TRIG_b; /*!< BitSize */ }; - + union { __O uint32_t ZQ_TRIG; /*!< ZQCTL trigger */ - + struct { __O uint32_t CS : 1; /*!< Write 1 to trigger one ZQCS request by cbus */ __O uint32_t CL : 1; /*!< Write 1 to trigger one ZQCL request by cbus */ } ZQ_TRIG_b; /*!< BitSize */ }; - + union { __IO uint32_t ZQCSR; /*!< ZQCSR */ - + struct { __IO uint32_t EN : 1; /*!< Enable ZQCS request */ __IO uint32_t PRI : 1; /*!< 0: DMA access prior to ZQCS, 1: ZQCS prior to DMA access */ } ZQCSR_b; /*!< BitSize */ }; __IO uint32_t ZQCSI; /*!< ZQCS interval time */ - + union { __IO uint32_t RCD; /*!< t(RCD) */ - + struct { __IO uint32_t DI : 5; /*!< t(RCD), delay from ACT command to RW command of same bank */ } RCD_b; /*!< BitSize */ }; - + union { __IO uint32_t RAS; /*!< t(RAS) */ - + struct { __IO uint32_t DI : 6; /*!< t(RAS), delay from ACT command to PRE command of same bank */ } RAS_b; /*!< BitSize */ }; - + union { __IO uint32_t RP; /*!< t(RP) */ - + struct { __IO uint32_t DI : 5; /*!< t(RP), delay from PRE command to ACT/REF/ZQ command */ uint32_t : 3; __IO uint32_t RPA : 1; /*!< 0: t(RP) delay for PREA command; 1: t(RP)+1 delay for PREA command */ } RP_b; /*!< BitSize */ }; - + union { __IO uint32_t RC; /*!< t(RC) */ - + struct { __IO uint32_t DI : 7; /*!< t(RC), delay from ACT command to ACT command of same bank */ } RC_b; /*!< BitSize */ }; - + union { __IO uint32_t RRD; /*!< t(RRD) */ - + struct { __IO uint32_t DI : 4; /*!< t(RRD), delay from ACT command to ACT command */ } RRD_b; /*!< BitSize */ }; - + union { __IO uint32_t CCD; /*!< t(CCD) */ - + struct { __IO uint32_t DI : 3; /*!< t(CCD), delay from RW command to RW command */ } CCD_b; /*!< BitSize */ }; - + union { __IO uint32_t RTW; /*!< t(RTW) */ - + struct { __IO uint32_t DI : 5; /*!< t(RTW), delay from RD command to WR command */ } RTW_b; /*!< BitSize */ }; - + union { __IO uint32_t WTR; /*!< t(WTR) */ - + struct { __IO uint32_t DI : 5; /*!< t(WTR), delay from WR command to RD command */ } WTR_b; /*!< BitSize */ }; - + union { __IO uint32_t RTP; /*!< t(RTP) */ - + struct { __IO uint32_t DI : 3; /*!< t(RTP), delay from RD command to PRE command of same bank */ } RTP_b; /*!< BitSize */ }; - + union { __IO uint32_t WTP; /*!< t(WTP) */ - + struct { __IO uint32_t DI : 6; /*!< t(WTP), delay from WR command to PRE command of same bank */ } WTP_b; /*!< BitSize */ }; - + union { __IO uint32_t RFC; /*!< t(RFC) */ - + struct { __IO uint32_t DI : 8; /*!< t(WTP), delay from WR command to PRE command of same bank */ } RFC_b; /*!< BitSize */ }; - + union { __IO uint32_t ZQCL; /*!< t(ZQoper) */ - + struct { __IO uint32_t DI : 9; /*!< t(ZQoper), delay from ZQCL command to REF/ZQ/ACT command */ } ZQCL_b; /*!< BitSize */ }; - + union { __IO uint32_t ZQCS; /*!< t(ZQCS) */ - + struct { __IO uint32_t DI : 7; /*!< t(ZQCS), delay from ZQCS command to REF/ZQ/ACT command */ } ZQCS_b; /*!< BitSize */ }; - + union { __IO uint32_t FAW; /*!< t(FAW) */ - + struct { __IO uint32_t DI : 6; /*!< t(FAW), 4 act command window time */ } FAW_b; /*!< BitSize */ }; - + union { __IO uint32_t BURST; /*!< BURST */ - + struct { __IO uint32_t LEN : 1; /*!< 0: length 8, 1: length 4 */ } BURST_b; /*!< BitSize */ }; - + union { __IO uint32_t PHUNG; /*!< PHUNG */ - + struct { __IO uint32_t MODE : 1; /*!< 0: normal mode, 1: prevent read hang mode */ __IO uint32_t LPM : 1; /*!< 1: stop the IO clk */ } PHUNG_b; /*!< BitSize */ }; - + union { __IO uint32_t RL; /*!< READ Latency */ - + struct { __IO uint32_t VAL : 5; /*!< READ Latency */ } RL_b; /*!< BitSize */ }; - + union { __IO uint32_t WL; /*!< WRITE Latency */ - + struct { __IO uint32_t VAL : 5; /*!< WRITE Latency */ } WL_b; /*!< BitSize */ }; - + union { __IO uint32_t TRAIN; /*!< TRAIN */ - + struct { __IO uint32_t EN : 4; /*!< Enable lane N training mode */ } TRAIN_b; /*!< BitSize */ }; - + union { __IO uint32_t DQSEN0; /*!< Delay cycles of dqsen of byte lane 0 */ - + struct { __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 0 */ } DQSEN0_b; /*!< BitSize */ }; - + union { __IO uint32_t DQSEN1; /*!< Delay cycles of dqsen of byte lane 1 */ - + struct { __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 1 */ } DQSEN1_b; /*!< BitSize */ }; - + union { __IO uint32_t DQSEN2; /*!< Delay cycles of dqsen of byte lane 2 */ - + struct { __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 2 */ } DQSEN2_b; /*!< BitSize */ }; - + union { __IO uint32_t DQSEN3; /*!< Delay cycles of dqsen of byte lane 0 */ - + struct { __IO uint32_t DL : 3; /*!< Delay cycles of dqsen of byte lane 3 */ } DQSEN3_b; /*!< BitSize */ }; - + union { __IO uint32_t ODTH; /*!< Delay from WR command to odt high transition */ - + struct { __IO uint32_t DL : 5; /*!< Delay from WR command to odt high transition */ } ODTH_b; /*!< BitSize */ }; - + union { __IO uint32_t ODTL; /*!< Delay from WR command to odt low transition */ - + struct { __IO uint32_t DL : 5; /*!< Delay from WR command to odt low transition */ } ODTL_b; /*!< BitSize */ }; - + union { __O uint32_t ODT; /*!< Used in write leveling mode */ - + struct { __O uint32_t TRIG : 1; /*!< 0: trigger odt low, 1: trigger odt high */ } ODT_b; /*!< BitSize */ }; - + union { __O uint32_t DQS; /*!< Used in write leveling mode */ - + struct { __O uint32_t TRIG : 1; /*!< Writing 1 to this register triggers a dqs pulse */ } DQS_b; /*!< BitSize */ }; - + union { __I uint32_t STA; /*!< Commands FIFO */ - + struct { __I uint32_t MODE : 1; /*!< DDRC in sw_proc mode */ __I uint32_t EMPTY : 1; /*!< Sw_proc command fifo empty */ __I uint32_t FULL : 1; /*!< Sw_proc command fifo full */ } STA_b; /*!< BitSize */ }; - + union { __IO uint32_t INTCTL; /*!< Interrupt Control */ - + struct { __IO uint32_t DONE : 1; /*!< 0: the sw_proc_done int will not be masked, 1: the sw_proc_done int will be masked */ @@ -7679,36 +7679,36 @@ typedef struct { /*!< DDRC Structure edge active */ } INTCTL_b; /*!< BitSize */ }; - + union { __IO uint32_t INTRAW; /*!< Interrupt RAW */ - + struct { __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done before mask */ __IO uint32_t ERR : 1; /*!< int reg of the lane sync error before masked */ } INTRAW_b; /*!< BitSize */ }; - + union { __IO uint32_t INTSTA; /*!< Interrupt STA */ - + struct { __IO uint32_t DONE : 1; /*!< Int register of sw_proc_done after mask */ __IO uint32_t ERR : 1; /*!< int register of lane sync error after masked */ } INTSTA_b; /*!< BitSize */ }; - + union { __IO uint32_t PHY; /*!< PHY */ - + struct { __IO uint32_t RST : 1; /*!< FPGA version, reset read dq fifo. Low active */ } PHY_b; /*!< BitSize */ }; - + union { __IO uint32_t RDQ; /*!< FPGA version, read dq delay of byte lane N */ - + struct { __IO uint32_t L3 : 6; /*!< FPGA version, read dq delay of byte lane3 */ uint32_t : 2; @@ -7719,10 +7719,10 @@ typedef struct { /*!< DDRC Structure __IO uint32_t L0 : 7; /*!< FPGA version, read dq delay of byte lane0 */ } RDQ_b; /*!< BitSize */ }; - + union { __I uint32_t CALIB; /*!< calibration */ - + struct { __I uint32_t TPU : 8; /*!< calibration result values, if fail then 0x40 */ __I uint32_t TPD : 8; /*!< calibration result values, if fail then 0x40 */ @@ -7733,12 +7733,12 @@ typedef struct { /*!< DDRC Structure positive edge */ } CALIB_b; /*!< BitSize */ }; - + union { __IO uint32_t ITMDLY; /*!< "itmdly" is the fine delay trim to the read path "dq", "itmsdly" is to the read path of "dqs". From 000 to 111 increasingly, each step is about 40ps */ - + struct { __IO uint32_t I0 : 4; /*!< itmdly0 */ __IO uint32_t IS0 : 4; /*!< itmsdly0 */ @@ -7750,10 +7750,10 @@ typedef struct { /*!< DDRC Structure __IO uint32_t IS3 : 4; /*!< itmsdly3 */ } ITMDLY_b; /*!< BitSize */ }; - + union { __IO uint32_t TUNE; /*!< CALIB_TUNE */ - + struct { __IO uint32_t TPU : 4; /*!< tpu_tune, finial val = tune[3] ? val - tune : val + tune */ __IO uint32_t TPD : 4; /*!< tpd_tune, tune[3:0] for TPD/TPU, [2:0] is the tune val */ @@ -7761,10 +7761,10 @@ typedef struct { /*!< DDRC Structure __IO uint32_t NDR : 4; /*!< ndr_tune, tune[2:0] for NDR/PDR, [1:0] is the tune val */ } TUNE_b; /*!< BitSize */ }; - + union { __IO uint32_t RD_SEL; /*!< RD_WINDOWS_SEL */ - + struct { __IO uint32_t PHY_SEL : 3; /*!< To fix the phy read valid issue, this is to adjust the read data valid window to match the phy read valid by cycle level */ @@ -7783,10 +7783,10 @@ typedef struct { /*!< DDRC Structure */ typedef struct { /*!< PDLOCK Structure */ - + union { __I uint32_t GCLK; /*!< GCLK */ - + struct { __I uint32_t C1R2P : 1; /*!< gclk_c1r2_pll_lock */ __I uint32_t C1R1P : 1; /*!< gclk_c1r1_pll_lock */ @@ -7811,10 +7811,10 @@ typedef struct { /*!< PDLOCK Structure */ typedef struct { /*!< PDPROT Structure */ - + union { __O uint32_t LOCK; /*!< LOCK */ - + struct { __O uint32_t EN : 1; /*!< Enable the PLL DLL Lock to Protect it */ } LOCK_b; /*!< BitSize */ @@ -7833,20 +7833,20 @@ typedef struct { /*!< PDPROT Structure typedef struct { /*!< CFG_CTRL Structure */ __I uint32_t RESERVED0[3]; - + union { __IO uint32_t DONE; /*!< DONE CFG */ - + struct { __IO uint32_t CMD : 1; /*!< Write 1 indicate all chain data write over */ __IO uint32_t STA : 1; /*!< 1= all chain config process over, chip is in user mode */ } DONE_b; /*!< BitSize */ }; __I uint32_t RESERVED1[34]; - + union { __IO uint32_t PDLLSTR; /*!< PLL DLL RESET */ - + struct { __IO uint32_t C1R1P : 1; /*!< C1r1_rstpll_n, low active */ __IO uint32_t C1R2P : 1; /*!< C1r2_rstpll_n, low active */ @@ -7871,10 +7871,10 @@ typedef struct { /*!< CFG_CTRL Structure */ typedef struct { /*!< SOFT_RESET Structure */ - + union { __IO uint32_t SOFTRST; /*!< SOFTRST */ - + struct { __IO uint32_t CAN1_n : 1; /*!< soft_rst_can1_n */ __IO uint32_t CAN0_n : 1; /*!< soft_rst_can0_n */ diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_adc.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_adc.h index 7059c3c7ee..93fd4ebc4c 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_adc.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_adc.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_adc.h - * - * @brief CMEM7 ADC header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_adc.h + * + * @brief CMEM7 ADC header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_ADC_H #define __CMEM7_ADC_H @@ -38,8 +38,8 @@ * @{ */ typedef enum { - ADC_PERIPH_1, - ADC_PERIPH_2, + ADC_PERIPH_1, + ADC_PERIPH_2, } ADC_PERIPH; #define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC_PERIPH_1) || \ @@ -67,7 +67,7 @@ typedef enum { /** @defgroup ADC_PHASE_CTRL * @{ */ -#define ADC_PHASE_CTRL_0DEG_RISE_EDGE 0 /* ADC-1 and ADC-2 CLK are 0DEG Phase Difference(Rising Edge) */ +#define ADC_PHASE_CTRL_0DEG_RISE_EDGE 0 /* ADC-1 and ADC-2 CLK are 0DEG Phase Difference(Rising Edge) */ #define ADC_PHASE_CTRL_90DEG_AHEAD 1 /* ADC-1 90DEG ahead of ADC-2 */ #define ADC_PHASE_CTRL_90DEG_LAG 2 /* ADC-1 90DEG lag of ADC-2 */ #define ADC_PHASE_CTRL_0DEG_FALL_EDGE 3 /* ADC-1 and ADC-2 CLK are 0DEG Phase Difference(falling Edge) */ @@ -84,11 +84,11 @@ typedef enum { * @{ */ #define ADC_SYSTEM_MODE_SINGLE_CONV 1 -#define ADC_SYSTEM_MODE_CONTINUOUS_CONV 2 +#define ADC_SYSTEM_MODE_CONTINUOUS_CONV 2 #define IS_ADC_CONVERSION(CONV) (((CONV) == ADC_SYSTEM_MODE_SINGLE_CONV) || \ ((CONV) == ADC_SYSTEM_MODE_CONTINUOUS_CONV)) - + /** * @} */ @@ -119,7 +119,7 @@ typedef enum { /** @defgroup ADC1_CHANNEL * @{ */ -#define ADC1_CHANNEL_VIP 0x1 +#define ADC1_CHANNEL_VIP 0x1 #define ADC1_CHANNEL_VSEN 0x2 #define ADC1_CHANNEL_VADIO_0 0x4 #define ADC1_CHANNEL_VADIO_1 0x8 @@ -136,8 +136,8 @@ typedef enum { /** @defgroup ADC2_CHANNEL * @{ - */ -#define ADC2_CHANNEL_VIN 0x1 + */ +#define ADC2_CHANNEL_VIN 0x1 #define ADC2_CHANNEL_VTMP 0x2 #define ADC2_CHANNEL_VADIO_6 0x4 #define ADC2_CHANNEL_VADIO_7 0x8 @@ -147,118 +147,118 @@ typedef enum { #define ADC2_CHANNEL_VADIO_11 0x80 #define ADC2_CHANNEL_ALL 0xFF -#define IS_ADC2_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) & ~ADC2_CHANNEL_ALL) == 0) +#define IS_ADC2_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) & ~ADC2_CHANNEL_ALL) == 0) /** * @} */ /** @defgroup ADC_INT * @{ - */ -#define ADC1_INT_ALMOST_FULL 0x1 + */ +#define ADC1_INT_ALMOST_FULL 0x1 #define ADC2_INT_ALMOST_FULL 0x8 -#define ADC_INT_ALL 0x9 +#define ADC_INT_ALL 0x9 -#define IS_ADC_INT(INT) (((INT) != 0) && (((INT) & ~ADC_INT_ALL) == 0)) +#define IS_ADC_INT(INT) (((INT) != 0) && (((INT) & ~ADC_INT_ALL) == 0)) /** * @} */ /** * @brief ADC collection data structure - */ + */ typedef struct { - uint8_t channel; /*!< The channel of collected data, is a value of - @ref ADC_CHANNEL, @ref ADC1_CHANNEL or @ref ADC2_CHANNEL */ - uint16_t data; /*!< collected data */ + uint8_t channel; /*!< The channel of collected data, is a value of + @ref ADC_CHANNEL, @ref ADC1_CHANNEL or @ref ADC2_CHANNEL */ + uint16_t data; /*!< collected data */ } ADC_Data; /** * @brief ADC initialization structure - */ + */ typedef struct { - uint8_t ADC_PhaseCtrl; /*!< Phase between ADC1 and ADC2, is a value of @ref ADC_PHASE_CTRL */ - uint8_t ADC_VsenSelection; /*!< ADC1 VSEN selection, is a value of @ref ADC_VSEN */ + uint8_t ADC_PhaseCtrl; /*!< Phase between ADC1 and ADC2, is a value of @ref ADC_PHASE_CTRL */ + uint8_t ADC_VsenSelection; /*!< ADC1 VSEN selection, is a value of @ref ADC_VSEN */ } ADC_InitTypeDef; /** * @brief ADC initialization * @note This function should be called at first before any other interfaces. - * @param[in] init A pointer to structure ADC_InitTypeDef + * @param[in] init A pointer to structure ADC_InitTypeDef * @retval None - */ + */ void ADC_Init(ADC_InitTypeDef* init); /** - * @brief Enable or disable ADC. - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @param[in] Enable The bit indicates if the specific ADC is enable or not + * @brief Enable or disable ADC. + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @param[in] Enable The bit indicates if the specific ADC is enable or not * @retval None - */ + */ void ADC_Enable(uint8_t adc, BOOL enable); /** - * @brief Enable or disable ADC interrupt. - * @param[in] Int interrupt mask bits, which can be a combination of @ref ADC_INT - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable ADC interrupt. + * @param[in] Int interrupt mask bits, which can be a combination of @ref ADC_INT + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void ADC_EnableInt(uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] Int interrupt mask bits, which can be a combination of @ref ADC_INT - * @retval BOOL The bit indicates if the specific interrupts are set or not - */ + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be a combination of @ref ADC_INT + * @retval BOOL The bit indicates if the specific interrupts are set or not + */ BOOL ADC_GetIntStatus(uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] Int interrupt mask bits, which can be a value of @ref ADC_INT + * @param[in] Int interrupt mask bits, which can be a value of @ref ADC_INT * @retval None - */ + */ void ADC_ClearInt(uint32_t Int); /** - * @brief ADC starts to convert data - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @param[in] convMode It should be a value of @ref ADC_CONVERSION - * @param[in] channel It should be the value of @ref ADC1_CHANNEL - * or @ref ADC2_CHANNEL according to parameter 'adc' + * @brief ADC starts to convert data + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @param[in] convMode It should be a value of @ref ADC_CONVERSION + * @param[in] channel It should be the value of @ref ADC1_CHANNEL + * or @ref ADC2_CHANNEL according to parameter 'adc' * @retval BOOL The bit indicates if the specific ADC starts to convert data - */ + */ BOOL ADC_StartConversion(uint8_t adc, uint8_t convMode, uint32_t channel); /** * @brief ADC starts to calibrate and produces one sample - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @param[in] convMode It should be a value of @ref ADC_CALIBRATION + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @param[in] convMode It should be a value of @ref ADC_CALIBRATION * @retval BOOL The bit indicates if the specific ADC starts to convert data - */ + */ BOOL ADC_StartCalibration(uint8_t adc, uint8_t calibration); /** * @brief ADC stops conversion or calibration - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @retval NULL - */ + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @retval NULL + */ void ADC_Stop(uint8_t adc); /** * @brief Check if ADC is busy or not - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @retval BOOL The bit indicates if the specific ADC is busy or not - */ + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @retval BOOL The bit indicates if the specific ADC is busy or not + */ BOOL ADC_IsBusy(uint8_t adc); /** * @brief Read data from ADC - * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH - * @param[in] Size Expected data size to be read - * @param[out] data A user-allocated buffer to fetch data to be read + * @param[in] adc ADC peripheral, which is a value of @ref ADC_PERIPH + * @param[in] Size Expected data size to be read + * @param[out] data A user-allocated buffer to fetch data to be read * @retval uint8_t Actual read data size - */ + */ uint8_t ADC_Read(uint8_t adc, uint8_t size, ADC_Data* data); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_aes.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_aes.h index 66a45de5fb..167eb886df 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_aes.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_aes.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_aes.h - * - * @brief CMEM7 AES header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_aes.h + * + * @brief CMEM7 AES header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_AES_H #define __CMEM7_AES_H @@ -36,12 +36,12 @@ /** * @brief AES decryption - * @param[in] src A pointer to data to be decrypted - * @param[out] dst A user-allocated buffer to fetch decrypted data + * @param[in] src A pointer to data to be decrypted + * @param[out] dst A user-allocated buffer to fetch decrypted data * @param[in] len Expected data size to be decrypted, which should - * be multiply times of 16 - * @retval BOOL True if succeed, or flase - */ + * be multiply times of 16 + * @retval BOOL True if succeed, or flase + */ BOOL AES_Decrypt(const void *src, void *dst, uint32_t len); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_can.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_can.h index d22a0f6518..137515a826 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_can.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_can.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_can.h - * - * @brief CMEM7 CAN header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_can.h + * + * @brief CMEM7 CAN header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_CAN_H #define __CMEM7_CAN_H @@ -33,13 +33,13 @@ #include "cmem7.h" #include "cmem7_conf.h" - + #define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN0) || \ ((PERIPH) == CAN1)) /** @defgroup CAN_FLT * @{ - */ + */ #define CAN_FLT_STANDARD_SINGLE 0x00000000 #define CAN_FLT_STANDARD_DUAL 0x00000001 #define CAN_FLT_EXTENDED_SINGLE 0x00000002 @@ -47,15 +47,15 @@ #define IS_CAN_FLT_TYPE(FILTER) (((FILTER) == CAN_FLT_STANDARD_SINGLE) || \ ((FILTER) == CAN_FLT_STANDARD_DUAL) || \ - ((FILTER) == CAN_FLT_EXTENDED_SINGLE) || \ - ((FILTER) == CAN_FLT_EXTENDED_DUAL)) - + ((FILTER) == CAN_FLT_EXTENDED_SINGLE) || \ + ((FILTER) == CAN_FLT_EXTENDED_DUAL)) + #define IS_CAN_FLT_SINGLE(FILTER) (((FILTER) == CAN_FLT_STANDARD_SINGLE) || \ ((FILTER) == CAN_FLT_EXTENDED_SINGLE)) #define IS_CAN_FLT_DUAL(FILTER) (IS_CAN_FLT_TYPE(FILTER) && \ !IS_CAN_FLT_SINGLE(FILTER)) - + /** * @} */ @@ -74,12 +74,12 @@ #define IS_CAN_CDR_DIV(DIV) (((DIV) == CAN_CDR_DIV_1_2) || \ ((DIV) == CAN_CDR_DIV_1_4) || \ - ((DIV) == CAN_CDR_DIV_1_6) || \ - ((DIV) == CAN_CDR_DIV_1_8) || \ - ((DIV) == CAN_CDR_DIV_1_10) || \ - ((DIV) == CAN_CDR_DIV_1_12) || \ - ((DIV) == CAN_CDR_DIV_1_14) || \ - ((DIV) == CAN_CDR_DIV_1_1)) + ((DIV) == CAN_CDR_DIV_1_6) || \ + ((DIV) == CAN_CDR_DIV_1_8) || \ + ((DIV) == CAN_CDR_DIV_1_10) || \ + ((DIV) == CAN_CDR_DIV_1_12) || \ + ((DIV) == CAN_CDR_DIV_1_14) || \ + ((DIV) == CAN_CDR_DIV_1_1)) /** * @} */ @@ -97,137 +97,137 @@ #define CAN_INT_BUS_ERR 0x80 #define CAN_INT_All 0xFF -#define IS_CAN_INT(INT) (((INT) != 0) && (((INT) & ~CAN_INT_All) == 0)) +#define IS_CAN_INT(INT) (((INT) != 0) && (((INT) & ~CAN_INT_All) == 0)) /** * @} */ /** * @brief CAN standard filter structure - */ + */ typedef struct { - uint16_t ID28_18; /*!< 11 bits */ + uint16_t ID28_18; /*!< 11 bits */ BOOL RTR; /*!< if remote frame */ - uint8_t data1; /*!< data byte 1, if not 2nd CAN_FLT_STANDARD_DUAL*/ - uint8_t data2; /*!< data byte 2, if CAN_FLT_STANDARD_SINGLE */ + uint8_t data1; /*!< data byte 1, if not 2nd CAN_FLT_STANDARD_DUAL*/ + uint8_t data2; /*!< data byte 2, if CAN_FLT_STANDARD_SINGLE */ } CAN_STANDARD_FILTER; /** * @brief CAN extended filter structure - */ + */ typedef struct { - uint16_t ID28_13; /*!< 16 bits */ - uint16_t ID12_0; /*!< 13 bits, if CAN_FLT_EXTENDED_SINGLE */ + uint16_t ID28_13; /*!< 16 bits */ + uint16_t ID12_0; /*!< 13 bits, if CAN_FLT_EXTENDED_SINGLE */ BOOL RTR; /*!< if remote frame, if CAN_FLT_EXTENDED_SINGLE */ } CAN_EXTENDED_FILTER; /** * @brief CAN filter structure - */ + */ typedef struct { - uint8_t type; /*!< Filter type, which is a value of @ref CAN_FLT */ - - /** + uint8_t type; /*!< Filter type, which is a value of @ref CAN_FLT */ + + /** * @brief accepted filter - */ - union { - CAN_STANDARD_FILTER sf; - CAN_EXTENDED_FILTER ef; - } ACCEPT; - - /** - * @brief filter mask - */ - union { - CAN_STANDARD_FILTER sf; - CAN_EXTENDED_FILTER ef; - } MASK; + */ + union { + CAN_STANDARD_FILTER sf; + CAN_EXTENDED_FILTER ef; + } ACCEPT; + + /** + * @brief filter mask + */ + union { + CAN_STANDARD_FILTER sf; + CAN_EXTENDED_FILTER ef; + } MASK; } CAN_FILTER; /** * @brief CAN initialization structure - */ -typedef struct { - BOOL CAN_TxEn; /*!< if transmission is enable */ - BOOL CAN_Loopback; /*!< loop back mode without phy */ - uint8_t CAN_ClockDiv; /*!< input clock divider, ref as @ref CAN_CDR_DIV */ - uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. - Time quantum = (CAN_Prescaler + 1) * 2 * input clock */ - uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta - the CAN hardware is allowed to lengthen or - shorten a bit to perform resynchronization. */ - uint8_t CAN_TSEG1; /*!< the maximum number of time quanta of - propagation and 1st phase segment */ - uint8_t CAN_TSEG2; /*!< the maximum number of time quanta of 2nd - phase segment */ - BOOL CAN_HighSpeed; /*!< if CAN is running on high speed bus (class C) */ + */ +typedef struct { + BOOL CAN_TxEn; /*!< if transmission is enable */ + BOOL CAN_Loopback; /*!< loop back mode without phy */ + uint8_t CAN_ClockDiv; /*!< input clock divider, ref as @ref CAN_CDR_DIV */ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + Time quantum = (CAN_Prescaler + 1) * 2 * input clock */ + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. */ + uint8_t CAN_TSEG1; /*!< the maximum number of time quanta of + propagation and 1st phase segment */ + uint8_t CAN_TSEG2; /*!< the maximum number of time quanta of 2nd + phase segment */ + BOOL CAN_HighSpeed; /*!< if CAN is running on high speed bus (class C) */ } CAN_InitTypeDef; /** * @brief CAN frame structure - */ + */ typedef struct { - BOOL SFF; /*!< If standard or extended frame format */ - uint32_t Id; /*!< Specifies the identifier.This parameter can - be a value between 0 to 0x1FFFFFFF. */ - BOOL RTR; /*!< Specifies if the frame is a remote frame */ - uint8_t DLC; /*!< Specifies the length of the frame, which is - a value between 0 to 8 */ - uint8_t Data[8]; /*!< Frame data */ + BOOL SFF; /*!< If standard or extended frame format */ + uint32_t Id; /*!< Specifies the identifier.This parameter can + be a value between 0 to 0x1FFFFFFF. */ + BOOL RTR; /*!< Specifies if the frame is a remote frame */ + uint8_t DLC; /*!< Specifies the length of the frame, which is + a value between 0 to 8 */ + uint8_t Data[8]; /*!< Frame data */ } CAN_Frame; /** * @brief CAN initialization * @note This function should be called at first before any other interfaces. - * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @param[in] Init A pointer to structure CAN_InitTypeDef - * @param[in] f1 A pointer to structure CAN_FILTER - * @param[in] f2 NULL if single filter, or a pointer to second filter while dual filters + * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 + * @param[in] Init A pointer to structure CAN_InitTypeDef + * @param[in] f1 A pointer to structure CAN_FILTER + * @param[in] f2 NULL if single filter, or a pointer to second filter while dual filters * @retval BOOL The bit indicates if specific CAN is initialized or not - */ -BOOL CAN_Init(CAN0_Type* CANx, CAN_InitTypeDef* Init, + */ +BOOL CAN_Init(CAN0_Type* CANx, CAN_InitTypeDef* Init, CAN_FILTER *f1, CAN_FILTER *f2); /** * @brief CAN is set to sleep or wake up * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @param[in] Enable The bit indicates if sleep mode is enable or not - * @retval None - */ + * @param[in] Enable The bit indicates if sleep mode is enable or not + * @retval None + */ void CAN_SetSleepMode(CAN0_Type* CANx, BOOL enable); /** - * @brief Enable or disable UART interrupt. - * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref CAN_INT - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable UART interrupt. + * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref CAN_INT + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void CAN_EnableInt(CAN0_Type* CANx, uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @note All interrupts except for receive int are cleared after call this func. - * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @retval uint8_t CAN interrupt bits, which can be the combination of @ref CAN_INT - */ + * @brief Check specific interrupts are set or not + * @note All interrupts except for receive int are cleared after call this func. + * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 + * @retval uint8_t CAN interrupt bits, which can be the combination of @ref CAN_INT + */ uint8_t CAN_GetIntStatus(CAN0_Type* CANx); /** * @brief CAN perform to transmit data - * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @param[in] frame A pointer to the CAN_Frame to be transmitted - * @retval BOOL The bit indicates if data is transmitted or not - */ + * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 + * @param[in] frame A pointer to the CAN_Frame to be transmitted + * @retval BOOL The bit indicates if data is transmitted or not + */ BOOL CAN_Transmit(CAN0_Type* CANx, CAN_Frame* frame); /** * @brief CAN perform to receive data - * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 - * @param[out] frame A user-allocated buffer to fetch received frame - * @retval BOOL The bit indicates if data is recieved or not - */ + * @param[in] CANx CAN peripheral, which is CAN0 or CAN1 + * @param[out] frame A user-allocated buffer to fetch received frame + * @retval BOOL The bit indicates if data is recieved or not + */ BOOL CAN_Receive(CAN0_Type* CANx, CAN_Frame* frame); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h index f6a2757476..9b4588eba4 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_conf.h - * - * @brief CMEM7 config file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_conf.h + * + * @brief CMEM7 config file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #ifndef __CMEM7_CONF_H #define __CMEM7_CONF_H @@ -50,7 +50,7 @@ #define _M7NORFLASH #define _ME_6095_F -#define USE_FULL_ASSERT 1 +#define USE_FULL_ASSERT 1 #ifdef USE_FULL_ASSERT /** @@ -62,11 +62,11 @@ */ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((unsigned char *)__FILE__, __LINE__)) - static void assert_failed(unsigned char* file, unsigned long line) { - while (1) { - ; - } - } + static void assert_failed(unsigned char* file, unsigned long line) { + while (1) { + ; + } + } #else #define assert_param(expr) ((void)0) #endif /* USE_FULL_ASSERT */ @@ -76,16 +76,16 @@ typedef enum _BOOL {FALSE = 0, TRUE = 1} BOOL; /** * System clock frequency, unit is Hz. */ -#define SYSTEM_CLOCK_FREQ 300000000 +#define SYSTEM_CLOCK_FREQ 300000000 //250000000 //300000000 /** - * @brief usecond delay - * @note It can't delay in an accurate time - * @param[in] usec usecond to be delay - * @retval None - */ + * @brief usecond delay + * @note It can't delay in an accurate time + * @param[in] usec usecond to be delay + * @retval None + */ static void udelay(unsigned long usec) { unsigned long count = 0; unsigned long utime = SYSTEM_CLOCK_FREQ / 1000000 * usec; @@ -95,18 +95,18 @@ static void udelay(unsigned long usec) { /** * UART definition for print - */ -#define PRINT_UART UART2 + */ +#define PRINT_UART UART2 /** * DDR type definition */ -#define DDR_TYPE 3 // 2 for DDR2, 3 for DDR3 +#define DDR_TYPE 3 // 2 for DDR2, 3 for DDR3 #if (DDR_TYPE == 3) -# define DDR_SIZE (256 << 20) +# define DDR_SIZE (256 << 20) #elif (DDR_TYPE == 2) -# define DDR_SIZE (128 << 20) +# define DDR_SIZE (128 << 20) #else # error #endif diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_ddr.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_ddr.h index 98dfef13c2..72ca60c0dc 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_ddr.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_ddr.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_ddr.h - * - * @brief CMEM7 AES header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_ddr.h + * + * @brief CMEM7 AES header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_DDR_H #define __CMEM7_DDR_H @@ -36,11 +36,11 @@ /** @defgroup _MEM_TYPE * @{ */ -enum _MEM_TYPE +enum _MEM_TYPE { - MEM_DDR2=1, - MEM_DDR3 -} ; + MEM_DDR2=1, + MEM_DDR3 +} ; /** * @} */ @@ -50,30 +50,30 @@ enum _MEM_TYPE */ enum _BUS_WIDTH { - BUS_WIDTH_8, - BUS_WIDTH_16, - BUS_WIDTH_MAX + BUS_WIDTH_8, + BUS_WIDTH_16, + BUS_WIDTH_MAX }; /** * @} */ /** @defgroup _CHIP_TYPE * @{ - */ + */ enum _CHIP_TYPE { - _32Mbx8, - _64Mbx8, - _128Mbx8, - _256Mbx8, - _512Mbx8, - _16Mbx16, - _32Mbx16, - _64Mbx16, - _128Mbx16, - _256Mbx16, - _512Mbx16, - CHIP_TYPE_MAX + _32Mbx8, + _64Mbx8, + _128Mbx8, + _256Mbx8, + _512Mbx8, + _16Mbx16, + _32Mbx16, + _64Mbx16, + _128Mbx16, + _256Mbx16, + _512Mbx16, + CHIP_TYPE_MAX }; /** * @} @@ -81,27 +81,27 @@ enum _CHIP_TYPE /** @defgroup _CHIP_NUM * @{ - */ + */ enum _CHIP_NUM { - CHIP_NUM_x1, - CHIP_NUM_x2, - CHIP_NUM_MAX + CHIP_NUM_x1, + CHIP_NUM_x2, + CHIP_NUM_MAX }; /** * @} */ - + /** @defgroup MEM_CHIP_INFO * @{ */ typedef struct { - uint8_t mem_type; /*!< ddr type @ref _MEM_TYPE*/ - uint8_t Bus_width; /*!< ddr qs bus width @ref _BUS_WIDTH*/ - uint8_t Chip_type; /*!< chip type @ref _CHIP_TYPE*/ - uint8_t Chip_num; /*!< chip number @ref _CHIP_NUM*/ - uint8_t Chip_bank; /*!< chip bank number*/ -} MEM_CHIP_INFO; + uint8_t mem_type; /*!< ddr type @ref _MEM_TYPE*/ + uint8_t Bus_width; /*!< ddr qs bus width @ref _BUS_WIDTH*/ + uint8_t Chip_type; /*!< chip type @ref _CHIP_TYPE*/ + uint8_t Chip_num; /*!< chip number @ref _CHIP_NUM*/ + uint8_t Chip_bank; /*!< chip bank number*/ +} MEM_CHIP_INFO; /** * @} */ @@ -111,18 +111,18 @@ typedef struct { * @{ */ typedef struct { - uint32_t tCK; /*!< Period of clock(ps), not data period */ - uint32_t tCL; /*!< tCL */ - uint32_t tRCD; /*!< tRCD */ - uint32_t tRP; /*!< tRP */ - uint32_t tRC; /*!< tRC */ - uint32_t tRAS; /*!< tRAS */ - uint32_t tWR; /*!< tWR */ - uint32_t tRRD; /*!< tRRD */ - uint32_t tWTR; /*!< tWTR */ - uint32_t tRTP; /*!< tRTP */ - uint32_t tFAW; /*!< tFAW */ -} DDR2MEM; /*!< DDR2ʱ���� */ + uint32_t tCK; /*!< Period of clock(ps), not data period */ + uint32_t tCL; /*!< tCL */ + uint32_t tRCD; /*!< tRCD */ + uint32_t tRP; /*!< tRP */ + uint32_t tRC; /*!< tRC */ + uint32_t tRAS; /*!< tRAS */ + uint32_t tWR; /*!< tWR */ + uint32_t tRRD; /*!< tRRD */ + uint32_t tWTR; /*!< tWTR */ + uint32_t tRTP; /*!< tRTP */ + uint32_t tFAW; /*!< tFAW */ +} DDR2MEM; /*!< DDR2时序定义 */ /** * @} */ @@ -131,20 +131,20 @@ typedef struct { * @{ */ typedef struct { - uint32_t tCK; /*!< Period of clock(ps), not data period */ - uint32_t tCL; /*!< tCL */ - uint32_t tWCL; /*!< tWCL */ - uint32_t tRCD; /*!< tRCD */ - uint32_t tRAS; /*!< tRAS */ - uint32_t tRP; /*!< tRP */ - uint32_t tRC; /*!< tRC */ - uint32_t tRRD; /*!< tRRD */ - uint32_t tFAW; /*!< tFAW */ - uint32_t tWR; /*!< tWR */ - uint32_t tRTP; /*!< tRTP */ - uint32_t tZQoper; /*!< tZQCL */ - uint32_t tZQCS; /*!< tZQCS */ -} DDR3MEM; /*!< DDR3ʱ���� */ + uint32_t tCK; /*!< Period of clock(ps), not data period */ + uint32_t tCL; /*!< tCL */ + uint32_t tWCL; /*!< tWCL */ + uint32_t tRCD; /*!< tRCD */ + uint32_t tRAS; /*!< tRAS */ + uint32_t tRP; /*!< tRP */ + uint32_t tRC; /*!< tRC */ + uint32_t tRRD; /*!< tRRD */ + uint32_t tFAW; /*!< tFAW */ + uint32_t tWR; /*!< tWR */ + uint32_t tRTP; /*!< tRTP */ + uint32_t tZQoper; /*!< tZQCL */ + uint32_t tZQCS; /*!< tZQCS */ +} DDR3MEM; /*!< DDR3时序定义 */ /** * @} */ @@ -152,8 +152,8 @@ typedef struct { /** @defgroup DDR2PREDEF * @{ */ -extern const DDR2MEM DDR2PREDEF[]; /*!< Pre-defined DDR2 Timing in library */ -#define DDR2_400C 0 /*!< sg5E: DDR2-400C CL=4, tCK=5000ps */ +extern const DDR2MEM DDR2PREDEF[]; /*!< Pre-defined DDR2 Timing in library */ +#define DDR2_400C 0 /*!< sg5E: DDR2-400C CL=4, tCK=5000ps */ /** * @} @@ -162,8 +162,8 @@ extern const DDR2MEM DDR2PREDEF[]; /*!< Pre-defined DDR2 Timing in library */ /** @defgroup DDR3PREDEF * @{ */ -extern const DDR3MEM DDR3PREDEF[]; /*!< Pre-defined DDR3 Timing in library */ -#define DDR3_400 0 +extern const DDR3MEM DDR3PREDEF[]; /*!< Pre-defined DDR3 Timing in library */ +#define DDR3_400 0 #define DDR3_667 1 /** diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h index 5e63902448..fed0c7cddb 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_dma.h - * - * @brief CMEM7 DMA header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_dma.h + * + * @brief CMEM7 DMA header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_DMA_H #define __CMEM7_DMA_H @@ -37,75 +37,75 @@ /** @defgroup DMA_Int * @{ */ -#define DMA_Int_TfrComplete 0x00000001 +#define DMA_Int_TfrComplete 0x00000001 #define DMA_Int_Err 0x00000002 #define DMA_Int_All 0x00000003 #define IS_DMA_INT(INT) (((INT) != 0) && (((INT) & ~DMA_Int_All) == 0)) /** * @} - */ + */ /** * @brief Descriptor structure - * @note DMA requires users provides a list of descriptors to operation. - * Meanwhile, memory occupied by descriptors should be in physical - * memory and keep valid during DMA transfer. - */ -typedef struct { - uint32_t srcAddr; /*!< source address */ - uint32_t dstAddr; /*!< destination address */ - uint32_t number; /*!< block byte number, no more than 2K Bytes */ - uint32_t nextBlock; /*!< next block descriptor */ - uint32_t padding; /*!< Nonsense, only used to fill */ + * @note DMA requires users provides a list of descriptors to operation. + * Meanwhile, memory occupied by descriptors should be in physical + * memory and keep valid during DMA transfer. + */ +typedef struct { + uint32_t srcAddr; /*!< source address */ + uint32_t dstAddr; /*!< destination address */ + uint32_t number; /*!< block byte number, no more than 2K Bytes */ + uint32_t nextBlock; /*!< next block descriptor */ + uint32_t padding; /*!< Nonsense, only used to fill */ } BLOCK_DESC; - + /** * @brief DMA initialization * @note This function should be called at first before any other interfaces. - * @param None - * @retval None - */ + * @param None + * @retval None + */ void DMA_Init(void); /** - * @brief Enable or disable DMA interrupt. - * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable DMA interrupt. + * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void DMA_EnableInt(uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int * @retval BOOL The bit indicates if specific interrupts are set or not - */ + */ BOOL DMA_GetIntStatus(uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int + * @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int * @retval None - */ + */ void DMA_ClearInt(uint32_t Int); /** * @brief DMA transfer - * @note Make sure that memory occupied by descriptors should be in physical - * memory and keep valid before DMA transfer is finished (Return false by - * calling DMA_IsBusy after DMA transfer started). - * @param[in] blockList A pointer to header of list of BLOCK_DESC + * @note Make sure that memory occupied by descriptors should be in physical + * memory and keep valid before DMA transfer is finished (Return false by + * calling DMA_IsBusy after DMA transfer started). + * @param[in] blockList A pointer to header of list of BLOCK_DESC * @retval BOOL The bit indicates if DMA begins to transfer - * @see DMA_IsBusy - */ + * @see DMA_IsBusy + */ BOOL DMA_Transfer(BLOCK_DESC *blockList); /** * @brief DMA is busy or not * @param None - * @retval BOOL The bit indicates if DMA is busy or not - */ + * @retval BOOL The bit indicates if DMA is busy or not + */ BOOL DMA_IsBusy(void); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_efuse.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_efuse.h index e8c19b3196..e8a031f247 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_efuse.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_efuse.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_efuse.h - * - * @brief CMEM7 EFUSE header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_efuse.h + * + * @brief CMEM7 EFUSE header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_EFUSE_H #define __CMEM7_EFUSE_H @@ -50,60 +50,60 @@ /** * @brief EFUSE timing structure - */ + */ typedef struct { - uint32_t EFUSE_Tpwph; /*!< Nano second */ + uint32_t EFUSE_Tpwph; /*!< Nano second */ uint32_t EFUSE_Trac; /*!< Nano second */ - uint32_t EFUSE_Trah; /*!< Nano second */ - uint32_t EFUSE_Trpw; /*!< Nano second */ - uint32_t EFUSE_Trc; /*!< Nano second */ - uint32_t EFUSE_Tesr; /*!< Nano second */ - uint32_t EFUSE_Tprs; /*!< Nano second */ - uint32_t EFUSE_Tpi; /*!< Nano second */ - uint32_t EFUSE_Tpp; /*!< Nano second */ - uint32_t EFUSE_Teps; /*!< Nano second */ - uint32_t EFUSE_Tpwps; /*!< Nano second */ + uint32_t EFUSE_Trah; /*!< Nano second */ + uint32_t EFUSE_Trpw; /*!< Nano second */ + uint32_t EFUSE_Trc; /*!< Nano second */ + uint32_t EFUSE_Tesr; /*!< Nano second */ + uint32_t EFUSE_Tprs; /*!< Nano second */ + uint32_t EFUSE_Tpi; /*!< Nano second */ + uint32_t EFUSE_Tpp; /*!< Nano second */ + uint32_t EFUSE_Teps; /*!< Nano second */ + uint32_t EFUSE_Tpwps; /*!< Nano second */ } EFUSE_Timing; /** * @brief EFUSE initialization structure - */ + */ typedef struct { - uint8_t EFUSE_ClockDividor; /*!< EFUSE clock dividor, 2 in n times */ - uint8_t EFUSE_TMRF; /*!< EFUSE reference resistor select, @ref EFUSE_TMRF_R */ + uint8_t EFUSE_ClockDividor; /*!< EFUSE clock dividor, 2 in n times */ + uint8_t EFUSE_TMRF; /*!< EFUSE reference resistor select, @ref EFUSE_TMRF_R */ EFUSE_Timing* timing; /*!< Timing configuration, null if default */ } EFUSE_InitTypeDef; /** * @brief EFUSE key structure - */ + */ typedef struct { - uint32_t key0; /*!< EFUSE AES key [31:0] */ + uint32_t key0; /*!< EFUSE AES key [31:0] */ uint32_t key1; /*!< EFUSE AES key [63:32] */ - uint32_t key2; /*!< EFUSE AES key [95:64] */ - uint32_t key3; /*!< EFUSE AES key [127:96] */ - uint32_t key4; /*!< EFUSE AES key [159:128] */ + uint32_t key2; /*!< EFUSE AES key [95:64] */ + uint32_t key3; /*!< EFUSE AES key [127:96] */ + uint32_t key4; /*!< EFUSE AES key [159:128] */ uint32_t key5; /*!< EFUSE AES key [191:160] */ - uint32_t key6; /*!< EFUSE AES key [223:192] */ - uint32_t key7; /*!< EFUSE AES key [255:224] */ + uint32_t key6; /*!< EFUSE AES key [223:192] */ + uint32_t key7; /*!< EFUSE AES key [255:224] */ } EFUSE_AesKey; /** * @brief EFUSE initialization * @note This function should be called at first before any other interfaces. - * @param[in] init A pointer to structure EFUSE_InitTypeDef + * @param[in] init A pointer to structure EFUSE_InitTypeDef * @retval None - */ + */ void EFUSE_Init(EFUSE_InitTypeDef* init); /** * @brief EFUSE initialization * @param[in] key A pointer to EFUSE_AesKey to be compared * @retval BOOL True if equal, or false if different - */ + */ BOOL EFUSE_Compare(EFUSE_AesKey* key); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h index 4edeca9205..aded62620d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_eth.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_eth.h - * - * @brief CMEM7 ethernet header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_eth.h + * + * @brief CMEM7 ethernet header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_ETH_H #define __CMEM7_ETH_H @@ -41,9 +41,9 @@ #define ETH_SPEED_100M 0x1 #define ETH_SPEED_1000M 0x2 -#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \ +#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \ ((SPEED) == ETH_SPEED_100M) || \ - ((SPEED) == ETH_SPEED_1000M)) + ((SPEED) == ETH_SPEED_1000M)) /** * @} */ @@ -54,33 +54,33 @@ #define ETH_DUPLEX_HALF 0x0 #define ETH_DUPLEX_FULL 0x1 -#define IS_ETH_DUPLEX(DUPLEX) (((DUPLEX) == ETH_DUPLEX_HALF) || \ - ((DUPLEX) == ETH_DUPLEX_FULL)) +#define IS_ETH_DUPLEX(DUPLEX) (((DUPLEX) == ETH_DUPLEX_HALF) || \ + ((DUPLEX) == ETH_DUPLEX_FULL)) /** * @} */ /** @defgroup ETH_INT * @{ - */ -#define ETH_INT_TX_COMPLETE_FRAME 0x0001 + */ +#define ETH_INT_TX_COMPLETE_FRAME 0x0001 #define ETH_INT_TX_STOP 0x0002 #define ETH_INT_TX_BUF_UNAVAI 0x0004 -#define ETH_INT_RX_OVERFLOW 0x0010 -#define ETH_INT_TX_UNDERFLOW 0x0020 +#define ETH_INT_RX_OVERFLOW 0x0010 +#define ETH_INT_TX_UNDERFLOW 0x0020 #define ETH_INT_RX_COMPLETE_FRAME 0x0040 #define ETH_INT_RX_BUF_UNAVAI 0x0080 #define ETH_INT_RX_STOP 0x0100 #define ETH_INT_BUS_FATAL_ERROR 0x2000 #define ETH_INT_ALL (ETH_INT_TX_COMPLETE_FRAME | \ ETH_INT_TX_STOP | \ - ETH_INT_TX_BUF_UNAVAI | \ - ETH_INT_RX_OVERFLOW | \ - ETH_INT_TX_UNDERFLOW | \ - ETH_INT_RX_COMPLETE_FRAME | \ - ETH_INT_RX_BUF_UNAVAI | \ - ETH_INT_RX_STOP | \ - ETH_INT_BUS_FATAL_ERROR) + ETH_INT_TX_BUF_UNAVAI | \ + ETH_INT_RX_OVERFLOW | \ + ETH_INT_TX_UNDERFLOW | \ + ETH_INT_RX_COMPLETE_FRAME | \ + ETH_INT_RX_BUF_UNAVAI | \ + ETH_INT_RX_STOP | \ + ETH_INT_BUS_FATAL_ERROR) #define IS_ETH_INT(INT) (((INT) != 0) && (((INT) & ~ETH_INT_ALL) == 0)) /** @@ -88,132 +88,132 @@ */ /** * @brief EFUSE receive filter structure - */ + */ typedef struct { - BOOL ETH_BroadcastFilterEnable; /*!< Broadcast is dropped or passed */ - BOOL ETH_OwnFilterEnable; /*!< source address filter is on or off */ - BOOL ETH_SelfDrop; /*!< Only own address is dropped or passed */ - BOOL ETH_SourceFilterEnable; /*!< source address filter is on or off */ - BOOL ETH_SourceDrop; /*!< Only specific source address is dropped or passed */ - uint8_t ETH_SourceMacAddr[6]; /*!< Source MAC address */ + BOOL ETH_BroadcastFilterEnable; /*!< Broadcast is dropped or passed */ + BOOL ETH_OwnFilterEnable; /*!< source address filter is on or off */ + BOOL ETH_SelfDrop; /*!< Only own address is dropped or passed */ + BOOL ETH_SourceFilterEnable; /*!< source address filter is on or off */ + BOOL ETH_SourceDrop; /*!< Only specific source address is dropped or passed */ + uint8_t ETH_SourceMacAddr[6]; /*!< Source MAC address */ } ETH_FrameFilter; /** * @brief Ethernet initialization structure - */ + */ typedef struct { - BOOL ETH_LinkUp; /*!< If ETH is linked up and it can be retrieved from PHY */ - uint8_t ETH_Speed; /*!< speed of ETH, refer as @ref ETH_SPEED */ - uint8_t ETH_Duplex; /*!< duplex mode of ETH, refer as @ref ETH_DUPLEX */ - BOOL ETH_RxEn; /*!< Rx enable */ - BOOL ETH_TxEn; /*!< Tx enable */ - BOOL ETH_ChecksumOffload; /*!< Checksum offload enable */ - BOOL ETH_JumboFrame; /*!< Jumbo Frame Enable */ - uint8_t ETH_MacAddr[6]; /*!< MAC address */ + BOOL ETH_LinkUp; /*!< If ETH is linked up and it can be retrieved from PHY */ + uint8_t ETH_Speed; /*!< speed of ETH, refer as @ref ETH_SPEED */ + uint8_t ETH_Duplex; /*!< duplex mode of ETH, refer as @ref ETH_DUPLEX */ + BOOL ETH_RxEn; /*!< Rx enable */ + BOOL ETH_TxEn; /*!< Tx enable */ + BOOL ETH_ChecksumOffload; /*!< Checksum offload enable */ + BOOL ETH_JumboFrame; /*!< Jumbo Frame Enable */ + uint8_t ETH_MacAddr[6]; /*!< MAC address */ ETH_FrameFilter *ETH_Filter; /*!< Received frame address filter, receive all if null */ } ETH_InitTypeDef; /** * @brief Ethernet Tx descriptor structure - */ -typedef struct { - union { + */ +typedef struct { + union { uint32_t TX0; - - struct { - uint32_t : 1; - uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */ - uint32_t : 1; - uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */ - uint32_t : 1; - uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */ - uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */ - uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */ - uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */ - uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */ - uint32_t : 2; - uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */ - uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */ - uint32_t : 8; - uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */ - uint32_t : 2; - uint32_t FS : 1; /*!< first segment flag */ - uint32_t LS : 1; /*!< last segment flag */ - uint32_t : 2; - } TX0_b; - } TX_0; - - union { + + struct { + uint32_t : 1; + uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */ + uint32_t : 1; + uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */ + uint32_t : 1; + uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */ + uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */ + uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */ + uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */ + uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */ + uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */ + uint32_t : 8; + uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */ + uint32_t : 2; + uint32_t FS : 1; /*!< first segment flag */ + uint32_t LS : 1; /*!< last segment flag */ + uint32_t : 2; + } TX0_b; + } TX_0; + + union { uint32_t TX1; - - struct { - uint32_t SIZE : 13; /*!< buffer size */ - uint32_t : 19; - } TX1_b; - } TX_1; - - uint32_t bufAddr; /*!< address of buffer */ - uint32_t nextDescAddr; /*!< address of next descriptor */ + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 19; + } TX1_b; + } TX_1; + + uint32_t bufAddr; /*!< address of buffer */ + uint32_t nextDescAddr; /*!< address of next descriptor */ uint64_t reserved; - uint64_t timeStamp; /*!< time stamp while last segment */ + uint64_t timeStamp; /*!< time stamp while last segment */ } ETH_TX_DESC; /** * @brief Ethernet Rx descriptor structure - */ -typedef struct { - union { + */ +typedef struct { + union { uint32_t RX0; - - struct { - uint32_t : 1; - uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */ - uint32_t : 5; - uint32_t TTSE : 1; /*!< timestamp available while last segment */ - uint32_t LS : 1; /*!< [OUT] last segment flag */ - uint32_t FS : 1; /*!< [OUT] first segment flag */ - uint32_t : 1; - uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */ - uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */ - uint32_t : 2; - uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */ - uint32_t FL : 14; /*!< [OUT] frame length while last segment */ - uint32_t : 2; - } RX0_b; - } RX_0; - - union { + + struct { + uint32_t : 1; + uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */ + uint32_t : 5; + uint32_t TTSE : 1; /*!< timestamp available while last segment */ + uint32_t LS : 1; /*!< [OUT] last segment flag */ + uint32_t FS : 1; /*!< [OUT] first segment flag */ + uint32_t : 1; + uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */ + uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */ + uint32_t FL : 14; /*!< [OUT] frame length while last segment */ + uint32_t : 2; + } RX0_b; + } RX_0; + + union { uint32_t RX1; - - struct { - uint32_t SIZE : 13; /*!< buffer size */ - uint32_t : 19; - } RX1_b; - } RX_1; - - uint32_t bufAddr; /*!< buffer address */ - uint32_t nextDescAddr; /*!< address of next descriptor */ + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 19; + } RX1_b; + } RX_1; + + uint32_t bufAddr; /*!< buffer address */ + uint32_t nextDescAddr; /*!< address of next descriptor */ uint64_t reserved; - uint64_t timeStamp; /*!< time stamp while the last segment */ + uint64_t timeStamp; /*!< time stamp while the last segment */ } ETH_RX_DESC; /** * @brief Read data from phy chip - * @param[in] phyAddr Address of phy chip - * @param[in] phyReg Address of phy's register to be read + * @param[in] phyAddr Address of phy chip + * @param[in] phyReg Address of phy's register to be read * @retval uint32_t value of phy's register - */ + */ uint32_t ETH_PhyRead(uint32_t phyAddr, uint32_t phyReg); /** * @brief Write data to phy chip - * @param[in] phyAddr Address of phy chip - * @param[in] phyReg Address of phy's register to be written - * @param[in] data Data to be written + * @param[in] phyAddr Address of phy chip + * @param[in] phyReg Address of phy's register to be written + * @param[in] data Data to be written * @retval None - */ + */ void ETH_PhyWrite(uint32_t phyAddr, uint32_t phyReg, uint32_t data); /** * @brief Fills each ETH_InitStruct member with its default value. @@ -225,188 +225,188 @@ void ETH_StructInit(ETH_InitTypeDef* init); /** * @brief Ethernet initialization * @note This function should be called at first before any other interfaces. - * @param[in] init A pointer to structure ETH_InitTypeDef + * @param[in] init A pointer to structure ETH_InitTypeDef * @retval BOOL The bit indicates if ethernet is initialized successfully - */ + */ BOOL ETH_Init(ETH_InitTypeDef *init); /** - * @brief Enable or disable ethernet interrupt. - * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable ethernet interrupt. + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void ETH_ITConfig(uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT * @retval BOOL The bit indicates if specific interrupts are set or not - */ + */ BOOL ETH_GetITStatus(uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT + * @param[in] Int interrupt mask bits, which can be the combination of @ref ETH_INT * @retval None - */ + */ void ETH_ClearITPendingBit(uint32_t Int); /** * @brief Get ethernte MAC address - * @param[in] mac A user-allocated buffer to fetch MAC to be read, 6 bytes. - * @retval None - */ + * @param[in] mac A user-allocated buffer to fetch MAC to be read, 6 bytes. + * @retval None + */ void ETH_GetMacAddr(uint8_t *mac); /** - * @brief Set ethernet transmission descriptor ring - * @note Make sure that memory occupied by descriptors should be in physical - * memory and keep valid before ethernet transmission is finished. - * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node - * has a 'nextDescAddr' pointed to first node. + * @brief Set ethernet transmission descriptor ring + * @note Make sure that memory occupied by descriptors should be in physical + * memory and keep valid before ethernet transmission is finished. + * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node + * has a 'nextDescAddr' pointed to first node. * @retval BOOL The bit indicates if valid ring is set - */ + */ BOOL ETH_SetTxDescRing(ETH_TX_DESC *ring); /** * @brief Start ethernet transmission - * @param None + * @param None * @retval None - */ + */ void ETH_StartTx(void); /** * @brief Stop ethernet transmission - * @param None + * @param None * @retval None - */ + */ void ETH_StopTx(void); /** * @brief Resume ethernet transmission\n - * While ethernet doesn't have enough buffer to transmit data, it will - * pause and inform users by interrupt 'ETH_INT_TX_BUF_UNAVAI'. Users - * must call this function to start ethernet again after new buffer - * prepared. - * @param None + * While ethernet doesn't have enough buffer to transmit data, it will + * pause and inform users by interrupt 'ETH_INT_TX_BUF_UNAVAI'. Users + * must call this function to start ethernet again after new buffer + * prepared. + * @param None * @retval None - */ + */ void ETH_ResumeTx(void); /** * @brief Get free transmission descriptor\n - * @param None - * @retval ETH_TX_DESC* A pointer of free transmission descriptor, - * NULL if no free descriptor - */ + * @param None + * @retval ETH_TX_DESC* A pointer of free transmission descriptor, + * NULL if no free descriptor + */ ETH_TX_DESC *ETH_AcquireFreeTxDesc(void); /** * @brief Check if a transmission descriptor is free or not - * @param[in] desc A pointer of a transmission descriptor + * @param[in] desc A pointer of a transmission descriptor * @retval BOOL True if the transmission descriptor is free, or flase. - */ + */ BOOL ETH_IsFreeTxDesc(ETH_TX_DESC *desc); /** * @brief Release a transmission descriptor to ethernet\n - * After users prepared data in the buffer of a free descriptor, - * They must call this function to change ownership of the - * descriptor to hardware. - * @param[in] desc A pointer of a transmission descriptor + * After users prepared data in the buffer of a free descriptor, + * They must call this function to change ownership of the + * descriptor to hardware. + * @param[in] desc A pointer of a transmission descriptor * @retval None - */ + */ void ETH_ReleaseTxDesc(ETH_TX_DESC *desc); /** * @brief Set buffer address of the specific TX descriptor - * @param[in] desc A pointer of a transmission descriptor + * @param[in] desc A pointer of a transmission descriptor * @param[in] bufAddr buffer address to be sent * @retval None - */ + */ void ETH_SetTxDescBufAddr(ETH_TX_DESC *desc, uint32_t bufAddr); /** * @brief Get buffer address of the specific TX descriptor - * @param[in] desc A pointer of a transmission descriptor + * @param[in] desc A pointer of a transmission descriptor * @retval uint32_t buffer address to be gotten - */ + */ uint32_t ETH_GetTxDescBufAddr(ETH_TX_DESC *desc); /** * @brief Set ethernet receive descriptor ring - * @note Make sure that memory occupied by descriptors should be in physical - * memory and keep valid before ethernet receive is finished. - * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node - * has a 'nextDescAddr' pointed to first node. + * @note Make sure that memory occupied by descriptors should be in physical + * memory and keep valid before ethernet receive is finished. + * @param[in] ring A pointer to header of ETH_TX_DESC ring, whose last node + * has a 'nextDescAddr' pointed to first node. * @retval BOOL The bit indicates if valid ring is set - */ + */ BOOL ETH_SetRxDescRing(ETH_RX_DESC *ring); /** * @brief Start ethernet receive - * @param None + * @param None * @retval None - */ + */ void ETH_StartRx(void); /** * @brief Stop ethernet receive - * @param None + * @param None * @retval None - */ + */ void ETH_StopRx(void); /** * @brief Resume ethernet receive\n - * While ethernet doesn't have enough buffer to receive data, it will - * pause and inform users by interrupt 'ETH_INT_RX_BUF_UNAVAI'. Users - * must call this function to start ethernet again after new buffer - * prepared. - * @param None + * While ethernet doesn't have enough buffer to receive data, it will + * pause and inform users by interrupt 'ETH_INT_RX_BUF_UNAVAI'. Users + * must call this function to start ethernet again after new buffer + * prepared. + * @param None * @retval None - */ + */ void ETH_ResumeRx(void); /** * @brief Get the free descriptor which contains received data\n - * @param None - * @retval ETH_RX_DESC* A pointer of free receive descriptor, - * NULL if no free descriptor - */ + * @param None + * @retval ETH_RX_DESC* A pointer of free receive descriptor, + * NULL if no free descriptor + */ ETH_RX_DESC *ETH_AcquireFreeRxDesc(void); /** * @brief Check if a receive descriptor is free or not - * @param[in] desc A pointer of a receive descriptor + * @param[in] desc A pointer of a receive descriptor * @retval BOOL True if the receive descriptor is free, or flase. - */ + */ BOOL ETH_IsFreeRxDesc(ETH_RX_DESC *desc); /** * @brief Release a receive descriptor to ethernet\n - * After users handled data in the buffer of a free descriptor, - * They must call this function to change ownership of the - * descriptor to hardware. - * @param[in] desc A pointer of a transmission descriptor + * After users handled data in the buffer of a free descriptor, + * They must call this function to change ownership of the + * descriptor to hardware. + * @param[in] desc A pointer of a transmission descriptor * @retval None - */ + */ void ETH_ReleaseRxDesc(ETH_RX_DESC *desc); /** * @brief Set buffer address of the specific RX descriptor - * @param[in] desc A pointer of a receive descriptor + * @param[in] desc A pointer of a receive descriptor * @param[in] bufAddr buffer address to be received * @retval None - */ + */ void ETH_SetRxDescBufAddr(ETH_RX_DESC *desc, uint32_t bufAddr); /** * @brief Get buffer address of the specific RX descriptor - * @param[in] desc A pointer of a receive descriptor + * @param[in] desc A pointer of a receive descriptor * @retval uint32_t buffer address to be gotten - */ + */ uint32_t ETH_GetRxDescBufAddr(ETH_RX_DESC *desc); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h index c0737b5295..05e79b1a1d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_flash.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_flash.h - * - * @brief CMEM7 flash controller source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_flash.h + * + * @brief CMEM7 flash controller source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_FLASH_H #define __CMEM7_FLASH_H @@ -37,15 +37,15 @@ /** @defgroup FLASH_PROTECT_MODE * @{ */ -#define FLASH_PROTECT_MODE_SW 0 /*!< The Status Register can be written to after a Write +#define FLASH_PROTECT_MODE_SW 0 /*!< The Status Register can be written to after a Write Enable command.(Default) */ -#define FLASH_PROTECT_MODE_HW 1 /*!< WP pin decides if the Status Register can be written +#define FLASH_PROTECT_MODE_HW 1 /*!< WP pin decides if the Status Register can be written WP#=0, the Status Register locked - WP#=1, the Status Register is unlocked and can be written to + WP#=1, the Status Register is unlocked and can be written to after a Write Enable command */ -#define FLASH_PROTECT_MODE_POWERDOWN 2 /*!< Status Register is protected and can not be written to again - until the next Power-Down, Power-Up cycle */ -#define FLASH_PROTECT_MODE_OTP 3 /*!< Status Register is permanently protected */ +#define FLASH_PROTECT_MODE_POWERDOWN 2 /*!< Status Register is protected and can not be written to again + until the next Power-Down, Power-Up cycle */ +#define FLASH_PROTECT_MODE_OTP 3 /*!< Status Register is permanently protected */ #define IS_FLASH_PROTECT_MODE(MODE) (((MODE) == FLASH_PROTECT_MODE_SW) || \ ((MODE) == FLASH_PROTECT_MODE_HW) || \ @@ -80,21 +80,21 @@ #define IS_FLASH_PROTECT_REGION(REGION) (((REGION) == FLASH_PROTECT_REGION_NONE) || \ ((REGION) == FLASH_PROTECT_REGION_UP_64K) || \ ((REGION) == FLASH_PROTECT_REGION_UP_128K) || \ - ((REGION) == FLASH_PROTECT_REGION_UP_256K) || \ - ((REGION) == FLASH_PROTECT_REGION_UP_512K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_64K) || \ + ((REGION) == FLASH_PROTECT_REGION_UP_256K) || \ + ((REGION) == FLASH_PROTECT_REGION_UP_512K) || \ + ((REGION) == FLASH_PROTECT_REGION_LOW_64K) || \ ((REGION) == FLASH_PROTECT_REGION_LOW_128K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_256K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_512K) || \ - ((REGION) == FLASH_PROTECT_REGION_ALL) || \ + ((REGION) == FLASH_PROTECT_REGION_LOW_256K) || \ + ((REGION) == FLASH_PROTECT_REGION_LOW_512K) || \ + ((REGION) == FLASH_PROTECT_REGION_ALL) || \ ((REGION) == FLASH_PROTECT_REGION_UP_4K) || \ ((REGION) == FLASH_PROTECT_REGION_UP_8K) || \ - ((REGION) == FLASH_PROTECT_REGION_UP_16K) || \ - ((REGION) == FLASH_PROTECT_REGION_UP_32K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_4K) || \ + ((REGION) == FLASH_PROTECT_REGION_UP_16K) || \ + ((REGION) == FLASH_PROTECT_REGION_UP_32K) || \ + ((REGION) == FLASH_PROTECT_REGION_LOW_4K) || \ ((REGION) == FLASH_PROTECT_REGION_LOW_8K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_16K) || \ - ((REGION) == FLASH_PROTECT_REGION_LOW_32K)) + ((REGION) == FLASH_PROTECT_REGION_LOW_16K) || \ + ((REGION) == FLASH_PROTECT_REGION_LOW_32K)) /** * @} */ @@ -110,96 +110,96 @@ #define IS_FLASH_READ_MODE(MODE) (((MODE) == FLASH_READ_MODE_NORMAL) || \ ((MODE) == FLASH_READ_MODE_FAST) || \ ((MODE) == FLASH_READ_MODE_FAST_DUAL) || \ - ((MODE) == FLASH_READ_MODE_FAST_QUAD)) + ((MODE) == FLASH_READ_MODE_FAST_QUAD)) /** * @} */ /** * @brief UART initialization structure - */ + */ typedef struct { uint8_t FLASH_ClockDividor; /*!< flash clock dividor, 2 in n times */ - uint8_t FLASH_ProtectMode; /*!< Status Register protection mode */ - uint8_t FLASH_ProtectRegion; /*!< flash protection region */ - BOOL FLASH_QuadEnable; /*!< if allows Quad operation */ - void (*FLASH_Wait)(void); /*!< When the former read or write operation is excuting, - Flash has to call a callback to wait it finish. - If null, Flash will wait forever until finish */ + uint8_t FLASH_ProtectMode; /*!< Status Register protection mode */ + uint8_t FLASH_ProtectRegion; /*!< flash protection region */ + BOOL FLASH_QuadEnable; /*!< if allows Quad operation */ + void (*FLASH_Wait)(void); /*!< When the former read or write operation is excuting, + Flash has to call a callback to wait it finish. + If null, Flash will wait forever until finish */ } FLASH_InitTypeDef; /** * @brief flash initialization * @note This function should be called at first before any other interfaces. - * Users should make sure that doesn't erase or write data in a - * write-protected region. - * @param[in] init A pointer to structure FLASH_InitTypeDef + * Users should make sure that doesn't erase or write data in a + * write-protected region. + * @param[in] init A pointer to structure FLASH_InitTypeDef * @retval None - */ + */ void FLASH_Init(FLASH_InitTypeDef* init); /** - * @brief Get flash status + * @brief Get flash status * @param[out] ProtectMode flash protect mode, ref as @ref FLASH_PROTECT_MODE * @param[out] ProtectRegion flash protect region, ref as @ref FLASH_PROTECT_REGION - * @param[out] QuadEnable quad speed mode enable bit - * @retval None - */ + * @param[out] QuadEnable quad speed mode enable bit + * @retval None + */ void FLASH_GetStatus(uint8_t* ProtectMode, uint8_t* ProtectRegion, BOOL* QuadEnable); /** * @brief Erase a sector, which is 4K bytes large. * @param[in] addr Start address of a sector - * @retval None - */ + * @retval None + */ void FLASH_EraseSector(uint32_t addr); /** * @brief Erase a block, which is 32K bytes large. * @param[in] addr Start address of a block - * @retval None - */ + * @retval None + */ void FLASH_Erase32kBlock(uint32_t addr); /** * @brief Erase a block, which is 64K bytes large. * @param[in] addr Start address of a block - * @retval None - */ + * @retval None + */ void FLASH_Erase64kBlock(uint32_t addr); /** * @brief Erase all chip - * @param None - * @retval None - */ + * @param None + * @retval None + */ void FLASH_EraseChip(void); /** * @brief Enable flash power down mode or not * @param[in] enable The bit indicates if flash power down mode is enable or not - * @retval None - */ + * @retval None + */ void FLASH_EnableDeepPowerDown(BOOL enable); /** * @brief Read data from flash - * @param[in] ReadMode Normal or fast read, ref as @ref FLASH_READ_MODE - * @param[in] addr Start address to be read - * @param[in] size Expected data size to be read - * @param[out] data A user-allocated buffer to fetch data to be read + * @param[in] ReadMode Normal or fast read, ref as @ref FLASH_READ_MODE + * @param[in] addr Start address to be read + * @param[in] size Expected data size to be read + * @param[out] data A user-allocated buffer to fetch data to be read * @retval None - */ + */ void FLASH_Read(uint8_t ReadMode, uint32_t addr, uint16_t size, uint8_t* data); /** * @brief Write data to flash - * @param[in] addr Start address to be read - * @param[in] size Expected data size to be read - * @param[out] data A pointer to the data to be written + * @param[in] addr Start address to be read + * @param[in] size Expected data size to be read + * @param[out] data A pointer to the data to be written * @retval None - */ + */ void FLASH_Write(uint32_t addr, uint16_t size, uint8_t* data); diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h index 1652a8a5d2..269bef9ba2 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_gpio.h - * - * @brief CMEM7 GPIO header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_gpio.h + * + * @brief CMEM7 GPIO header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_GPIO_H #define __CMEM7_GPIO_H @@ -38,7 +38,7 @@ * @{ */ typedef enum { - GPIO_GROUP_GPIO, + GPIO_GROUP_GPIO, } GPIO_GROUP; #define IS_GPIO_GROUP(GROUP) (((GROUP) == GPIO_GROUP_GPIO)) @@ -50,105 +50,105 @@ typedef enum { * @{ */ typedef enum { - GPIO_PWM_CHANNEL_GPIO_31, + GPIO_PWM_CHANNEL_GPIO_31, } GPIO_PWM_CHANNEL; - + #define IS_GPIO_PWM_CHANNEL(CHANNEL) (((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_31)) /** * @} */ - + /** * @brief GPIO initialization * @note This function should be called at first before any other interfaces. - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @param[in] PositiveTrigger Positive edge interrupt trigger if true, or negative edge + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @param[in] PositiveTrigger Positive edge interrupt trigger if true, or negative edge * @retval None - */ + */ void GPIO_Init(uint8_t Group, uint32_t PositiveTrigger); /** - * @brief Enable or disable GPIO output in the specific group. - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @param[in] Enable each bit indicates if the corresponding GPIO pin - * in the specific GPIO group is enable or not + * @brief Enable or disable GPIO output in the specific group. + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @param[in] Enable each bit indicates if the corresponding GPIO pin + * in the specific GPIO group is enable or not * @retval None - */ + */ void GPIO_EnableOutput(uint8_t Group, uint32_t Enable); /** - * @brief Enable or disable GPIO interrupt in the specific group. - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @param[in] Enable each bit indicates if the corresponding GPIO pin interrupt - * in the specific GPIO group is enable or not + * @brief Enable or disable GPIO interrupt in the specific group. + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @param[in] Enable each bit indicates if the corresponding GPIO pin interrupt + * in the specific GPIO group is enable or not * @retval None - */ + */ void GPIO_EnableInt(uint8_t Group, uint32_t Enable); /** - * @brief Check specific interrupts are set or not - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @retval uint32_t each bit indicates if the corresponding GPIO pin interrupt - * in the specific GPIO group is set or not - */ + * @brief Check specific interrupts are set or not + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @retval uint32_t each bit indicates if the corresponding GPIO pin interrupt + * in the specific GPIO group is set or not + */ uint32_t GPIO_GetIntStatus(uint8_t Group); /** - * @brief Clear GPIO interrupt in the specific group. - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @param[in] Clear each bit indicates if the corresponding GPIO pin interrupt - * in the specific GPIO group is clear or not + * @brief Clear GPIO interrupt in the specific group. + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @param[in] Clear each bit indicates if the corresponding GPIO pin interrupt + * in the specific GPIO group is clear or not * @retval None - */ + */ void GPIO_ClearInt(uint8_t Group, uint32_t Clear); /** * @brief Get value of each GPIO pin in the specific group - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @retval uint32_t each bit indicates value of the corresponding GPIO pin - * in the specific GPIO group - */ + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @retval uint32_t each bit indicates value of the corresponding GPIO pin + * in the specific GPIO group + */ uint32_t GPIO_Read(uint8_t Group); /** * @brief Set value of each GPIO pin in the specific group - * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP - * @param[in] Unmask each bit indicates value of the corresponding GPIO pin - * in the specific GPIO group is set or not - * @param[in] data each bit indicates value of the corresponding GPIO pin - * in the specific GPIO group to be set + * @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP + * @param[in] Unmask each bit indicates value of the corresponding GPIO pin + * in the specific GPIO group is set or not + * @param[in] data each bit indicates value of the corresponding GPIO pin + * in the specific GPIO group to be set * @retval None - */ + */ void GPIO_Write(uint8_t Group, uint32_t Unmask, uint32_t data); /** * @brief Initialize PWM for the specific GPIO pin - * @note It can work before call GPIO_EnableOutput for the specific GPIO pin - * @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL - * @param[in] HighLevelNanoSecond Nanosecond which high level lasts - * @param[in] LowLevelNanoSecond Nanosecond which low level lasts + * @note It can work before call GPIO_EnableOutput for the specific GPIO pin + * @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL + * @param[in] HighLevelNanoSecond Nanosecond which high level lasts + * @param[in] LowLevelNanoSecond Nanosecond which low level lasts * @retval None - * @see GPIO_EnableOutput - */ + * @see GPIO_EnableOutput + */ void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLevelNanoSecond); /** - * @brief Enable or disable GPIO PWM in the specific channel. - * @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL - * @param[in] Enable The bit indicates if the specific channel is enable or not + * @brief Enable or disable GPIO PWM in the specific channel. + * @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL + * @param[in] Enable The bit indicates if the specific channel is enable or not * @retval None - */ + */ void GPIO_EnablePwm(uint8_t Channel, BOOL Enable); /** xjf 20150324 - + **/ void GPIO_SetBits(uint32_t mask); void GPIO_clrBits(uint32_t mask); -uint32_t GPIO_getBits(uint32_t mask); +uint32_t GPIO_getBits(uint32_t mask); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_i2c.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_i2c.h index 388983838b..cdfc8ab442 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_i2c.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_i2c.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_i2c.h - * - * @brief CMEM7 I2C header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_i2c.h + * + * @brief CMEM7 I2C header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_I2C_H #define __CMEM7_I2C_H @@ -62,18 +62,18 @@ /** @defgroup I2C_INT * @{ - */ -#define I2C_INT_RX_FIFO_NOT_EMPTY 0x00000004 /*!< Can't be clear but read FIFO */ + */ +#define I2C_INT_RX_FIFO_NOT_EMPTY 0x00000004 /*!< Can't be clear but read FIFO */ #define I2C_INT_RD_REQUEST 0x00000020 /*!< Slave was requested to send data */ #define I2C_INT_TX_ABORT 0x00000040 /*!< Error while sending data */ #define I2C_INT_RX_DONE 0x00000080 /*!< Slave sent all requested data */ #define I2C_INT_TX_DONE 0x00000100 /*!< Master accomplish to send all data */ #define I2C_INT_ALL (I2C_INT_RX_FIFO_NOT_EMPTY | \ - I2C_INT_RD_REQUEST | \ - I2C_INT_TX_ABORT | \ - I2C_INT_RX_DONE | \ - I2C_INT_TX_DONE) + I2C_INT_RD_REQUEST | \ + I2C_INT_TX_ABORT | \ + I2C_INT_RX_DONE | \ + I2C_INT_TX_DONE) #define IS_I2C_INT(INT) (((INT) != 0) && (((INT) & ~I2C_INT_ALL) == 0)) /** @@ -83,17 +83,17 @@ /** @defgroup I2C_STATUS * @{ */ -#define I2C_STATUS_RX_FIFO_NOT_EMPTY 0x00200000 /*!< Can't be clear but read FIFO */ +#define I2C_STATUS_RX_FIFO_NOT_EMPTY 0x00200000 /*!< Can't be clear but read FIFO */ #define I2C_STATUS_RD_REQUEST 0x01000000 /*!< Slave was requested to send data */ #define I2C_STATUS_TX_ABORT 0x02000000 /*!< Error while sending data */ #define I2C_STATUS_RX_DONE 0x04000000 /*!< Slave sent all requested data */ #define I2C_STATUS_TX_DONE 0x08000000 /*!< Master accomplish to send all data */ #define I2C_STATUS_ALL (I2C_STATUS_RX_FIFO_NOT_EMPTY | \ - I2C_STATUS_RD_REQUEST | \ - I2C_STATUS_TX_ABORT | \ - I2C_STATUS_RX_DONE | \ - I2C_STATUS_TX_DONE) + I2C_STATUS_RD_REQUEST | \ + I2C_STATUS_TX_ABORT | \ + I2C_STATUS_RX_DONE | \ + I2C_STATUS_TX_DONE) #define IS_I2C_STATUS(STATUS) (((STATUS) != 0) && (((STATUS) & ~I2C_STATUS_ALL) == 0)) /** @@ -102,141 +102,141 @@ /** * @brief I2C timing structure - */ + */ typedef struct { uint32_t I2C_Freq; /*!< I2C frquency */ - uint16_t I2C_TsuDat; /*!< nano second of TSU:DAT */ - uint16_t I2C_Tsetup; /*!< nano second of THD:STA and TSU:STO */ - uint16_t I2C_Tbuf; /*!< nano second of TBUF */ - uint16_t I2C_TsuSta; /*!< nano second of TSU:STA */ - - BOOL I2C_SdaFilterEn; /*!< enabled flag of SDA filter */ - uint8_t I2C_SdaFilterSpike; /*!< spikes of SDA filter */ - BOOL I2C_SclFilterEn; /*!< enabled flag of SCL filter */ - uint8_t I2C_SclFilterSpike; /*!< spikes of SCL filter */ - + uint16_t I2C_TsuDat; /*!< nano second of TSU:DAT */ + uint16_t I2C_Tsetup; /*!< nano second of THD:STA and TSU:STO */ + uint16_t I2C_Tbuf; /*!< nano second of TBUF */ + uint16_t I2C_TsuSta; /*!< nano second of TSU:STA */ + + BOOL I2C_SdaFilterEn; /*!< enabled flag of SDA filter */ + uint8_t I2C_SdaFilterSpike; /*!< spikes of SDA filter */ + BOOL I2C_SclFilterEn; /*!< enabled flag of SCL filter */ + uint8_t I2C_SclFilterSpike; /*!< spikes of SCL filter */ + } I2C_InitTimingDef; /** * @brief I2C initialization structure - */ + */ typedef struct { uint8_t I2C_Mode; /*!< Specifies the I2C mode. This parameter can be a value of @ref I2C_mode */ - uint8_t I2C_AddressWidth; /*!< 7- or 10-bits width address, ref as @ref I2C_ADDR_WIDTH */ - uint8_t I2C_Address; /*!< 7- or 10-bits address */ - I2C_InitTimingDef* timing; /*!< timing structure, null if don't set */ + uint8_t I2C_AddressWidth; /*!< 7- or 10-bits width address, ref as @ref I2C_ADDR_WIDTH */ + uint8_t I2C_Address; /*!< 7- or 10-bits address */ + I2C_InitTimingDef* timing; /*!< timing structure, null if don't set */ } I2C_InitTypeDef; /** * @brief I2C initialization * @note This function should be called at first before any other interfaces. - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] init A pointer to structure I2C_InitTypeDef + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] init A pointer to structure I2C_InitTypeDef * @retval None - */ + */ void I2C_Init(I2C0_Type* I2Cx, I2C_InitTypeDef* I2C_Init); /** - * @brief Enable or disable I2C. - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Enable The bit indicates if the specific I2C is enable or not + * @brief Enable or disable I2C. + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Enable The bit indicates if the specific I2C is enable or not * @retval None - */ + */ void I2C_Enable(I2C0_Type* I2Cx, BOOL enable); /** - * @brief Enable or disable I2C interrupt. - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable I2C interrupt. + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void I2C_EnableInt(I2C0_Type* I2Cx, uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int + * @brief Check specific interrupts are set or not + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int * @retval BOOL The bit indicates if specific interrupts are enable or not - */ + */ BOOL I2C_GetIntStatus(I2C0_Type* I2Cx, uint32_t Int); /** * @brief Clear specific interrupts - * @note Specific interrupt clear will clear correspective status as well - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int + * @note Specific interrupt clear will clear correspective status as well + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref I2C_Int * @retval None - */ + */ void I2C_ClearInt(I2C0_Type* I2Cx, uint32_t Int); /** - * @brief Check specific status are set or not - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Status Status mask bits, which can be the combination of @ref I2C_STATUS + * @brief Check specific status are set or not + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Status Status mask bits, which can be the combination of @ref I2C_STATUS * @retval BOOL The bit indicates if specific status are set or not - */ + */ BOOL I2C_GetStatus(I2C0_Type* I2Cx, uint32_t Status); /** * @brief Clear specific status - * @note Specific status clear will clear correspective interrupt as well - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] Status Status mask bits, which can be the combination of @ref I2C_STATUS + * @note Specific status clear will clear correspective interrupt as well + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] Status Status mask bits, which can be the combination of @ref I2C_STATUS * @retval None - */ + */ void I2C_ClearStatus(I2C0_Type* I2Cx, uint32_t Status); /** * @brief I2C send read request in master mode - * @note Users must call I2C_StopReq between 2 requests - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] size Expected data size to be read + * @note Users must call I2C_StopReq between 2 requests + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] size Expected data size to be read * @retval BOOL The bit indicates if read request to be sent is valid - * @see I2C_StopReq - */ + * @see I2C_StopReq + */ BOOL I2C_MasterReadReq(I2C0_Type* I2Cx, uint8_t size); /** * @brief Read data from I2C - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] size Expected data size to be read - * @param[out] Data A user-allocated buffer to fetch data to be read + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] size Expected data size to be read + * @param[out] Data A user-allocated buffer to fetch data to be read * @retval uint8_t Actual read data size - */ + */ uint8_t I2C_ReadFifo(I2C0_Type* I2Cx, uint8_t size, uint8_t* data); /** * @brief I2C send write request in master or slave mode - * @note Users must call I2C_StopReq between 2 requests - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] size Expected data size to be written, includes the first data - * @param[in] firstData The first data to be written + * @note Users must call I2C_StopReq between 2 requests + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] size Expected data size to be written, includes the first data + * @param[in] firstData The first data to be written * @retval BOOL The bit indicates if write request to be sent is valid - * @see I2C_StopReq - */ + * @see I2C_StopReq + */ BOOL I2C_WriteReq(I2C0_Type* I2Cx, uint8_t size, uint8_t firstData); /** * @brief Write data to I2C - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @param[in] size Expected data size to be written - * @param[in] Data A pointer to the data to be written + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @param[in] size Expected data size to be written + * @param[in] Data A pointer to the data to be written * @retval uint8_t Actual written data size - */ + */ uint8_t I2C_WriteFifo(I2C0_Type* I2Cx, uint8_t size, uint8_t* data); /** * @brief I2C stop request - * @note Users must call I2C_StopReq between 2 requests - * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 - * @retval BOOL The bit indicates if request is stopped. - * @see I2C_MasterReadReq I2C_WriteReq - */ + * @note Users must call I2C_StopReq between 2 requests + * @param[in] I2Cx I2C peripheral, which is I2C0 or I2C1 + * @retval BOOL The bit indicates if request is stopped. + * @see I2C_MasterReadReq I2C_WriteReq + */ BOOL I2C_StopReq(I2C0_Type* I2Cx); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h index bb2adcd2a9..7cc887ad6a 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_includes.h - * - * @brief CMEM7 includes file, easy to use CMEM7 library - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_includes.h + * + * @brief CMEM7 includes file, easy to use CMEM7 library + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #ifndef __CMEM7_INCLUDES_H #define __CMEM7_INCLUDES_H @@ -33,84 +33,84 @@ #include "cmem7_conf.h" #include "cmem7_it.h" - + #ifdef _ADC - #include "cmem7_adc.h" + #include "cmem7_adc.h" #endif - + #ifdef _AES - #include "cmem7_aes.h" + #include "cmem7_aes.h" #endif - + #ifdef _CAN - #include "cmem7_can.h" + #include "cmem7_can.h" #endif - + #ifdef _DDR - #include "cmem7_ddr.h" + #include "cmem7_ddr.h" #endif - + #ifdef _DMA - #include "cmem7_dma.h" + #include "cmem7_dma.h" #endif - + #ifdef _EFUSE - #include "cmem7_efuse.h" + #include "cmem7_efuse.h" #endif - + #ifdef _ETH - #include "cmem7_eth.h" + #include "cmem7_eth.h" #endif - + #ifdef _FLASH - #include "cmem7_flash.h" + #include "cmem7_flash.h" #endif - + #ifdef _GPIO - #include "cmem7_gpio.h" + #include "cmem7_gpio.h" #endif - + #ifdef _I2C - #include "cmem7_i2c.h" + #include "cmem7_i2c.h" #endif - + #ifdef _MISC - #include "cmem7_misc.h" + #include "cmem7_misc.h" #endif - + #ifdef _RTC - #include "cmem7_rtc.h" + #include "cmem7_rtc.h" #endif - + #ifdef _SPI - #include "cmem7_spi.h" + #include "cmem7_spi.h" #endif - + #ifdef _TIM - #include "cmem7_tim.h" + #include "cmem7_tim.h" #endif - + #ifdef _UART - #include "cmem7_uart.h" + #include "cmem7_uart.h" #endif #ifdef _USB - #include "cmem7_usb.h" + #include "cmem7_usb.h" #endif #ifdef _WDG - #include "cmem7_wdg.h" + #include "cmem7_wdg.h" #endif #ifdef _MARVELL #include <marvel_98dx242.h> - #include <s24g_i2c.h> -#endif - + #include <s24g_i2c.h> +#endif + #ifdef _IP1826D #include <ip1826d_v00.h> -#endif +#endif #ifdef __cplusplus } diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h index 820a8ea59f..b8d8e9f3be 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_misc.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_misc.h - * - * @brief CMEM7 miscellaneous header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_misc.h + * + * @brief CMEM7 miscellaneous header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_MISC_H #define __CMEM7_MISC_H @@ -36,36 +36,36 @@ /** * @brief NVIC initialization structure - */ + */ /** -@code - The table below gives the allowed values of the pre-emption priority and subpriority according - to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function - ============================================================================================================================ - NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - ============================================================================================================================ - NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority - | | | 4 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority - | | | 3 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - | | | 2 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - | | | 1 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority - | | | 0 bits for subpriority - ============================================================================================================================ +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ @endcode - */ - + */ + typedef struct { uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. - This parameter can be a value of @ref IRQn_Type + This parameter can be a value of @ref IRQn_Type (For the complete Capital-micro Devices IRQ Channels list, please refer to cmem7.h file) */ @@ -78,10 +78,10 @@ typedef struct between 0 and 15 as described in the table @ref NVIC_Priority_Table */ BOOL NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel - will be enabled or disabled. - This parameter can be set either to ENABLE or DISABLE */ + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ } NVIC_InitTypeDef; - + /** @defgroup NVIC_VectTab * @{ @@ -132,7 +132,7 @@ typedef struct /** * @} */ - + #define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) #define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) @@ -141,7 +141,7 @@ typedef struct /** * @brief Configures the priority grouping: pre-emption priority and subpriority. - * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. * This parameter can be one of the following values, ref as @ref NVIC_PriorityGroup: * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority * 4 bits for subpriority @@ -172,7 +172,7 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); * This parameter can be one of the following values, ref as @ref NVIC_VectTab: * @arg NVIC_VectTab_RAM * @arg NVIC_VectTab_FLASH - * @param Offset: Vector Table base offset field. This value must be a multiple + * @param Offset: Vector Table base offset field. This value must be a multiple * of 0x200. * @retval None */ @@ -192,70 +192,70 @@ void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState); /** * @brief Memory map from address 'from' to 'address 'to' and open icache or not - * @param[in] from address to be mapped from - * @param[in] to address to be mapped to - * @param[in] isIcacheOn icache is on or off + * @param[in] from address to be mapped from + * @param[in] to address to be mapped to + * @param[in] isIcacheOn icache is on or off * @retval None - */ + */ void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn); /** * @brief Convert the mapping destination address to source address - * @param[in] to address to be mapped to + * @param[in] to address to be mapped to * @retval uint32_t address to be mapped from - */ + */ uint32_t GLB_ConvertToMappingFromAddr(uint32_t to); /** * @brief Convert the mapping source address to destination address - * @param[in] from address to be mapped from + * @param[in] from address to be mapped from * @retval uint32_t address to be mapped to - */ + */ uint32_t GLB_ConvertToMappingToAddr(uint32_t from); /** * @brief Set NMI irq number, it should be one of @ref IRQn_Type. - * @Note You can assign any valid IRQn_Type to NMI. After that, you will enter NMI - * interrupt routine if the specific 'irq' occurs. By default, NMI irq number - * is 0, same as ETH_INT_IRQn - * @param[in] irq irq number + * @Note You can assign any valid IRQn_Type to NMI. After that, you will enter NMI + * interrupt routine if the specific 'irq' occurs. By default, NMI irq number + * is 0, same as ETH_INT_IRQn + * @param[in] irq irq number * @retval None - */ + */ void GLB_SetNmiIrqNum(uint32_t irq); /** @defgroup SYS_CLK_SEL * @{ */ -#define SYS_CLK_SEL_OSC 0x0 -#define SYS_CLK_SEL_DLL 0x1 -#define SYS_CLK_SEL_CRYSTAL 0x2 -#define SYS_CLK_SEL_EXTERNAL 0x3 +#define SYS_CLK_SEL_OSC 0x0 +#define SYS_CLK_SEL_DLL 0x1 +#define SYS_CLK_SEL_CRYSTAL 0x2 +#define SYS_CLK_SEL_EXTERNAL 0x3 /** * @} */ - + /** * @brief Select system clock source, it should be one of @ref SYS_CLK_SEL. - * @Note You MUST make sure externel clock has been stabled if clock - * source is external before call this function. - * Default value is SYS_CLK_SEL_OSC - * @param[in] irq irq number + * @Note You MUST make sure externel clock has been stabled if clock + * source is external before call this function. + * Default value is SYS_CLK_SEL_OSC + * @param[in] irq irq number * @retval None - */ + */ void GLB_SelectSysClkSource(uint8_t source); /** * @brief Simulate instruction 'STRB' or 'STRH' with 'BFI' - * @Note In M7, you have to write a register in 32-bit alignment, - * not in 8-bit or 16-bit. - * @param[in] addr register address to be written + * @Note In M7, you have to write a register in 32-bit alignment, + * not in 8-bit or 16-bit. + * @param[in] addr register address to be written * @param[in] value value to be written * @param[in] lsb LSB in register to be written * @param[in] len bit length to be written * @retval None - */ - - + */ + + //#define aaaa(len) __asm("LDR len, 11") #define CMEM7_BFI(addr, value, lsb, len) \ @@ -266,7 +266,7 @@ void GLB_SelectSysClkSource(uint8_t source); __asm("LDR tmp, [tmp1]\n" \ "BFI tmp, "#value", "#lsb", "#len" \n" \ "STR tmp, [tmp1]\n"); \ - } while (0) + } while (0) #ifdef __cplusplus } diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_retarget.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_retarget.h index 579ba63ec0..ea5d3ad934 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_retarget.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_retarget.h @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_retarget.h - * - * @brief CMEM7 retarget header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_retarget.h + * + * @brief CMEM7 retarget header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #ifndef __CMEM7_RETARGET_H #define __CMEM7_RETARGET_H @@ -46,21 +46,21 @@ FILE __stderr; int fputc(int c, FILE *f) { uint8_t ch = c; - if (c == '\n') { - ch = '\r'; + if (c == '\n') { + ch = '\r'; while (0 == UART_Write(PRINT_UART, 1, &ch)); - ch = '\n'; + ch = '\n'; } - - while (0 == UART_Write(PRINT_UART, 1, &ch)) ; + + while (0 == UART_Write(PRINT_UART, 1, &ch)) ; return ch; } int fgetc(FILE *f) { - uint8_t ch; - - while (0 == UART_Read(PRINT_UART, 1, &ch)) ; + uint8_t ch; + + while (0 == UART_Read(PRINT_UART, 1, &ch)) ; return ch; } diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h index 885d704ceb..b48ea5d60f 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_rtc.h - * - * @brief CMEM7 RTC header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_rtc.h + * + * @brief CMEM7 RTC header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_RTC_H #define __CMEM7_RTC_H @@ -44,41 +44,41 @@ /** * @} */ - + /** - * @brief Enable or disable RTC interrupt. - * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable RTC interrupt. + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void RTC_ITConfig(uint32_t Int, BOOL Enable); /** - * @brief Check specific interrupts are set or not - * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @brief Check specific interrupts are set or not + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int * @retval BOOL The bit indicates if specific interrupts are set or not - */ + */ BOOL RTC_GetITStatus(uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int + * @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int * @retval None - */ + */ void RTC_ClearITPendingBit(uint32_t Int); /** * @brief Get seconds since power up - * @param None + * @param None * @retval uint32_t Seconds since power up - */ + */ uint32_t RTC_GetSecond(void); /** * @brief Get current millseconds - * @param None + * @param None * @retval uint32_t Current millseconds - */ + */ uint16_t RTC_GetMillSecond(void); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_spi.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_spi.h index d770005679..e264a48692 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_spi.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_spi.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_spi.h - * - * @brief CMEM7 SPI header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_spi.h + * + * @brief CMEM7 SPI header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_SPI_H #define __CMEM7_SPI_H @@ -43,29 +43,29 @@ /** @defgroup SPI_MODE * @{ */ -#define SPI_MODE_CPOL_0_CPHA_0 0 /*!< CPOL : Idle clock level is low level. - CPHA : Capture data at the first edge */ -#define SPI_MODE_CPOL_0_CPHA_1 1 /*!< CPOL : Idle clock level is low level. - CPHA : Capture data at the second edge */ -#define SPI_MODE_CPOL_1_CPHA_0 2 /*!< CPOL : Idle clock level is high level. - CPHA : Capture data at the first edge */ -#define SPI_MODE_CPOL_1_CPHA_1 3 /*!< CPOL : Idle clock level is high level. - CPHA : Capture data at the first edge */ +#define SPI_MODE_CPOL_0_CPHA_0 0 /*!< CPOL : Idle clock level is low level. + CPHA : Capture data at the first edge */ +#define SPI_MODE_CPOL_0_CPHA_1 1 /*!< CPOL : Idle clock level is low level. + CPHA : Capture data at the second edge */ +#define SPI_MODE_CPOL_1_CPHA_0 2 /*!< CPOL : Idle clock level is high level. + CPHA : Capture data at the first edge */ +#define SPI_MODE_CPOL_1_CPHA_1 3 /*!< CPOL : Idle clock level is high level. + CPHA : Capture data at the first edge */ #define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_CPOL_0_CPHA_0) || \ ((MODE) == SPI_MODE_CPOL_0_CPHA_1) || \ ((MODE) == SPI_MODE_CPOL_1_CPHA_0) || \ - ((MODE) == SPI_MODE_CPOL_1_CPHA_1)) + ((MODE) == SPI_MODE_CPOL_1_CPHA_1)) /** * @} */ /** @defgroup SPI_INT * @{ - */ -#define SPI_INT_RX_FIFO_UNDERFLOW 0x00000001 + */ +#define SPI_INT_RX_FIFO_UNDERFLOW 0x00000001 #define SPI_INT_RX_FIFO_OVERFLOW 0x00000002 #define SPI_INT_RX_FIFO_ALMOST_FULL 0x00000004 -#define SPI_INT_TX_FIFO_UNDERFLOW 0x00000008 +#define SPI_INT_TX_FIFO_UNDERFLOW 0x00000008 #define SPI_INT_TX_FIFO_OVERFLOW 0x00000010 #define SPI_INT_TX_FIFO_ALMOST_FULL 0x00000020 #define SPI_INT_DONE 0x00000040 @@ -78,14 +78,14 @@ /** * @brief SPI initialization structure - */ + */ typedef struct { uint8_t SPI_Mode; /*!< indicates SPI's CPOL and CPHA, ref as @ref SPI_MODE */ BOOL SPI_RxEn; /*!< indicates if SPI receiver is enabled or not */ uint8_t SPI_BitLength; /*!< bit length while transmitting and receiving */ - uint8_t SPI_Gap; /*!< cycle number between continuous data frame */ - uint8_t SPI_ClockDividor; /*!< SPI clock dividor, 1 / ((1 + DIV) * 2) */ + uint8_t SPI_Gap; /*!< cycle number between continuous data frame */ + uint8_t SPI_ClockDividor; /*!< SPI clock dividor, 1 / ((1 + DIV) * 2) */ } SPI_InitTypeDef; /** * @} @@ -94,69 +94,69 @@ typedef struct /** * @brief SPI initialization * @note This function should be called at first before any other interfaces. - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] init A pointer to structure SPI_InitTypeDef + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] init A pointer to structure SPI_InitTypeDef * @retval None - */ + */ void SPI_Init(SPI0_Type* SPIx, SPI_InitTypeDef *init); /** - * @brief Enable or disable SPI. - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] Enable The bit indicates if the specific SPI is enable or not + * @brief Enable or disable SPI. + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] Enable The bit indicates if the specific SPI is enable or not * @retval None - */ + */ void SPI_Enable(SPI0_Type* SPIx, BOOL enable); /** - * @brief Enable or disable SPI interrupt. - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable SPI interrupt. + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void SPI_EnableInt(SPI0_Type* SPIx, uint32_t Int, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int + * @brief Check specific interrupts are set or not + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int * @retval BOOL The bit indicates if specific interrupts are set or not - */ + */ BOOL SPI_GetIntStatus(SPI0_Type* SPIx, uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int * @retval None - */ + */ void SPI_ClearInt(SPI0_Type* SPIx, uint32_t Int); /** * @brief Read data from SPI FIFO - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] size Expected data size to be read - * @param[out] data A user-allocated buffer to fetch data to be read + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] size Expected data size to be read + * @param[out] data A user-allocated buffer to fetch data to be read * @retval uint8_t Actual read data size - */ + */ uint8_t SPI_ReadFifo(SPI0_Type* SPIx, uint8_t size, uint32_t* data); /** * @brief Write data to SPI FIFO - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] size Expected data size to be written - * @param[in] data A pointer to the data to be written + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] size Expected data size to be written + * @param[in] data A pointer to the data to be written * @retval uint8_t Actual written data size - */ + */ uint8_t SPI_WriteFifo(SPI0_Type* SPIx, uint8_t Size, uint32_t* data); /** - * @brief send a SPI transcation request - * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 - * @param[in] size Expected data size to be written and read - * @retval BOOL The bit indicates if the request is sent - */ + * @brief send a SPI transcation request + * @param[in] SPIx SPI peripheral, which is SPI0 or SPI1 + * @param[in] size Expected data size to be written and read + * @retval BOOL The bit indicates if the request is sent + */ BOOL SPI_Transcation(SPI0_Type* SPIx, uint8_t size); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_tim.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_tim.h index 99a2d68fd5..051aa99f15 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_tim.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_tim.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_tim.h - * - * @brief CMEM7 timer header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_tim.h + * + * @brief CMEM7 timer header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_TIM_H #define __CMEM7_TIM_H @@ -39,58 +39,58 @@ ((PERIPH) == TIMER1) || \ ((PERIPH) == TIMER2) || \ ((PERIPH) == TIMER3)) - + /** * @brief Timer initialization * @note This function should be called at first before any other interfaces. - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @param[in] Ms overflow micro-seconds of the specific timer + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @param[in] Ms overflow micro-seconds of the specific timer * @retval None - */ + */ void TIM_Init(TIMER0_Type* Timx, uint16_t Ms); /** - * @brief Enable or disable timer interrupt. - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @param[in] Enable The bit indicates if the specific interrupt is enable or not + * @brief Enable or disable timer interrupt. + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @param[in] Enable The bit indicates if the specific interrupt is enable or not * @retval None - */ + */ void TIM_EnableInt(TIMER0_Type* Timx, BOOL Enable); /** - * @brief Check the specific interrupt is set or not - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @retval BOOL The bit indicates if the specific interrupt is set or not - */ + * @brief Check the specific interrupt is set or not + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @retval BOOL The bit indicates if the specific interrupt is set or not + */ BOOL TIM_GetIntStatus(TIMER0_Type* Timx); /** * @brief Clear specific interrupts - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @retval None - */ + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @retval None + */ void TIM_ClearInt(TIMER0_Type* Timx); /** - * @brief Enable or disable timer. - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @param[in] Enable The bit indicates if the specific timer is enable or not + * @brief Enable or disable timer. + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @param[in] Enable The bit indicates if the specific timer is enable or not * @retval None - */ + */ void TIM_Enable(TIMER0_Type* Timx, BOOL Enable); /** - * @brief Check the specific timer is overflow or not - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @retval BOOL The bit indicates if the specific timer is overflow or not - */ + * @brief Check the specific timer is overflow or not + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @retval BOOL The bit indicates if the specific timer is overflow or not + */ BOOL TIM_IsOverflow(TIMER0_Type* Timx); /** * @brief Get current counter of timer - * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 - * @retval uint32_t current counter - */ + * @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3 + * @retval uint32_t current counter + */ uint32_t TIM_GetCounter(TIMER0_Type* Timx); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_uart.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_uart.h index 1a0d7e6139..f663024db7 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_uart.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_uart.h @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_uart.h - * - * @brief CMEM7 uart header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_uart.h + * + * @brief CMEM7 uart header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #ifndef __CMEM7_UART_H #define __CMEM7_UART_H @@ -37,7 +37,7 @@ #define IS_UART_ALL_PERIPH(PERIPH) (((PERIPH) == UART0) || \ ((PERIPH) == UART1) || \ ((PERIPH) == UART2)) - + /** @defgroup UART_StopBits * @{ */ @@ -61,7 +61,7 @@ #define UART_Parity_None 2 #define IS_UART_PARITY(PARITY) (((PARITY) == UART_Parity_Even) || \ ((PARITY) == UART_Parity_Odd) || \ - ((PARITY) == UART_Parity_None)) + ((PARITY) == UART_Parity_None)) /** * @} */ @@ -69,7 +69,7 @@ /** @defgroup UART_Int * @{ */ -#define UART_Int_RxNotEmpty 0x00000001 +#define UART_Int_RxNotEmpty 0x00000001 #define UART_Int_TxEmpty 0x00000002 #define UART_Int_TxHalfEmpty 0x00000004 #define UART_Int_TxTimeoutNotEmpty 0x00000008 @@ -87,80 +87,80 @@ /** * @} */ - + /** * @brief UART initialization structure - */ + */ typedef struct { - uint32_t UART_BaudRate; /*!< Baudrate */ - uint8_t UART_StopBits; /*!< Specifies the number of stop bits transmitted, - It's a value of @ref UART_StopBits */ - uint8_t UART_Parity; /*!< Specifies the parity mode. - It's a value of @ref UART_Parity */ - BOOL UART_LoopBack; /*!< loop back mode */ - BOOL UART_RxEn; /*!< Receive enable bit */ - BOOL UART_CtsEn; /*!< Clear to set */ + uint32_t UART_BaudRate; /*!< Baudrate */ + uint8_t UART_StopBits; /*!< Specifies the number of stop bits transmitted, + It's a value of @ref UART_StopBits */ + uint8_t UART_Parity; /*!< Specifies the parity mode. + It's a value of @ref UART_Parity */ + BOOL UART_LoopBack; /*!< loop back mode */ + BOOL UART_RxEn; /*!< Receive enable bit */ + BOOL UART_CtsEn; /*!< Clear to set */ } UART_InitTypeDef; /** * @brief UART initialization * @note This function should be called at first before any other interfaces. - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] init A pointer to structure UART_InitTypeDef + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] init A pointer to structure UART_InitTypeDef * @retval None - */ + */ void UART_Init(UART0_Type* UARTx, UART_InitTypeDef *init); /** - * @brief Enable or disable UART interrupt. - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int - * @param[in] Enable The bit indicates if specific interrupts are enable or not + * @brief Enable or disable UART interrupt. + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int + * @param[in] Enable The bit indicates if specific interrupts are enable or not * @retval None - */ + */ void UART_EnableInt(UART0_Type* UARTx, uint32_t Int, BOOL Enable); /** - * @brief Enable or disable UART. - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Enable The bit indicates if the specific UART is enable or not + * @brief Enable or disable UART. + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Enable The bit indicates if the specific UART is enable or not * @retval None - */ + */ void UART_Enable(UART0_Type* UARTx, BOOL enable); /** - * @brief Check specific interrupts are set or not - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int + * @brief Check specific interrupts are set or not + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int * @retval BOOL The bit indicates if specific interrupts are set or not - */ + */ BOOL UART_GetIntStatus(UART0_Type* UARTx, uint32_t Int); /** * @brief Clear specific interrupts - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int * @retval None - */ + */ void UART_ClearInt(UART0_Type* UARTx, uint32_t Int); /** * @brief Write data to UART - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Size Expected data size to be written - * @param[in] Data A pointer to the data to be written + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Size Expected data size to be written + * @param[in] Data A pointer to the data to be written * @retval uint8_t Actual written data size - */ + */ uint8_t UART_Write(UART0_Type* UARTx, uint8_t Size, uint8_t* Data); /** * @brief Read data from UART - * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 - * @param[in] Size Expected data size to be read - * @param[out] Data A user-allocated buffer to fetch data to be read + * @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2 + * @param[in] Size Expected data size to be read + * @param[out] Data A user-allocated buffer to fetch data to be read * @retval uint8_t Actual read data size - */ + */ uint8_t UART_Read(UART0_Type* UARTx, uint8_t Size, uint8_t* Data); diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h index 78c444c53b..97ad83dccc 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h @@ -1,29 +1,29 @@ /** - ***************************************************************************** - * @file cmem7_wdg.h - * - * @brief CMEM7 watchdog header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_wdg.h + * + * @brief CMEM7 watchdog header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #ifndef __CMEM7_WDG_H #define __CMEM7_WDG_H @@ -58,47 +58,47 @@ /** * @brief Deinitializes the Watchdog peripheral registers to their default reset values. - * @param[in] None + * @param[in] None * @retval None - */ + */ void WDG_DeInit(void); /** * @brief Watchdog initialization * @note This function should be called at first before any other interfaces. - * @param[in] trigger Watchdog interrupt trigger mode, which is a value of @ref WDG_TRIGGER_MODE - * @param[in] ResetMillSecond MillSeconds lasts before global reset + * @param[in] trigger Watchdog interrupt trigger mode, which is a value of @ref WDG_TRIGGER_MODE + * @param[in] ResetMillSecond MillSeconds lasts before global reset * @retval None - */ + */ void WDG_Init(uint8_t trigger, uint16_t ResetMillSecond); /** - * @brief Enable or disable watchdog interrupt. - * @param[in] Int interrupt mask bits, which is a value of @ref WDG_INT - * @param[in] Enable The bit indicates if the specific interrupt are enable or not + * @brief Enable or disable watchdog interrupt. + * @param[in] Int interrupt mask bits, which is a value of @ref WDG_INT + * @param[in] Enable The bit indicates if the specific interrupt are enable or not * @retval None - */ + */ void WDG_ITConfig(uint8_t Int, BOOL Enable); /** - * @brief Check the specific interrupt are set or not - * @param None + * @brief Check the specific interrupt are set or not + * @param None * @retval BOOL The bit indicates if the specific interrupt are set or not - */ + */ BOOL WDG_GetITStatus(void); /** * @brief Clear the specific interrupt - * @param None + * @param None * @retval None - */ + */ void WDG_ClearITPendingBit(void); /** - * @brief Enable or disable watchdog. - * @param[in] Enable The bit indicates if watchdog is enable or not + * @brief Enable or disable watchdog. + * @param[in] Enable The bit indicates if watchdog is enable or not * @retval None - */ + */ void WDG_Cmd(BOOL Enable); diff --git a/bsp/CME_M7/StdPeriph_Driver/inc/system_cmem7.h b/bsp/CME_M7/StdPeriph_Driver/inc/system_cmem7.h index de593b9ae7..89e7f717eb 100644 --- a/bsp/CME_M7/StdPeriph_Driver/inc/system_cmem7.h +++ b/bsp/CME_M7/StdPeriph_Driver/inc/system_cmem7.h @@ -1,42 +1,42 @@ /** - ***************************************************************************** - * @file system_cmem7.h - * - * @brief CMEM7 system initial header file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file system_cmem7.h + * + * @brief CMEM7 system initial header file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #ifndef __SYSTEM_CMEM7_H #define __SYSTEM_CMEM7_H #ifdef __cplusplus extern "C" { -#endif +#endif /** * @brief Setup the microcontroller system. * @note This function should be used only after reset. - * @param None + * @param None * @retval None - */ + */ void SystemInit(void); #ifdef __cplusplus diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_adc.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_adc.c index a2605f55ec..78e1f1bee2 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_adc.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_adc.c @@ -1,309 +1,309 @@ /** - ***************************************************************************** - * @file cmem7_adc.c - * - * @brief CMEM7 ADC source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_adc.c + * + * @brief CMEM7 ADC source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_adc.h" #include "cmem7.h" #define ADC_SYSTEM_MODE_IDLE 0 static BOOL adc_IsMultiChannel(uint32_t channel) { - uint32_t i = 0; - - for (i = 0; channel != 0; i++) { + uint32_t i = 0; + + for (i = 0; channel != 0; i++) { channel &= (channel - 1); - } - - return ((i > 1) ? TRUE : FALSE); + } + + return ((i > 1) ? TRUE : FALSE); } static uint8_t adc_GetChannel(uint32_t channel) { - uint32_t i = 0; - - for (i = 0; channel > 1; i++) { + uint32_t i = 0; + + for (i = 0; channel > 1; i++) { channel >>= 1; - } - - return i; + } + + return i; } static void adc_Reset(uint8_t adc, BOOL enable) { - if (adc == ADC_PERIPH_1) { - ADC->POWERDOWN_RESET_b.POWERDOWN_ADC1 = TRUE; - ADC->POWERDOWN_RESET_b.RESET_ADC1 = TRUE; - udelay(8000); - if (enable) { - ADC->POWERDOWN_RESET_b.POWERDOWN_ADC1 = FALSE; - ADC->POWERDOWN_RESET_b.RESET_ADC1 = FALSE; - udelay(8000); - } - } else { - ADC->POWERDOWN_RESET_b.POWERDOWN_ADC2 = TRUE; - ADC->POWERDOWN_RESET_b.RESET_ADC2 = TRUE; - udelay(8000); - if (enable) { - ADC->POWERDOWN_RESET_b.POWERDOWN_ADC2 = FALSE; - ADC->POWERDOWN_RESET_b.RESET_ADC2 = FALSE; - udelay(8000); - } - } + if (adc == ADC_PERIPH_1) { + ADC->POWERDOWN_RESET_b.POWERDOWN_ADC1 = TRUE; + ADC->POWERDOWN_RESET_b.RESET_ADC1 = TRUE; + udelay(8000); + if (enable) { + ADC->POWERDOWN_RESET_b.POWERDOWN_ADC1 = FALSE; + ADC->POWERDOWN_RESET_b.RESET_ADC1 = FALSE; + udelay(8000); + } + } else { + ADC->POWERDOWN_RESET_b.POWERDOWN_ADC2 = TRUE; + ADC->POWERDOWN_RESET_b.RESET_ADC2 = TRUE; + udelay(8000); + if (enable) { + ADC->POWERDOWN_RESET_b.POWERDOWN_ADC2 = FALSE; + ADC->POWERDOWN_RESET_b.RESET_ADC2 = FALSE; + udelay(8000); + } + } } void ADC_Init(ADC_InitTypeDef* init) { - assert_param(init); - assert_param(IS_ADC_PHASE_CTRL(init->ADC_PhaseCtrl)); - assert_param(IS_ADC_VSEN(init->ADC_VsenSelection)); - - SOFT_RESET->SOFTRST_b.ADC_n = 0; - SOFT_RESET->SOFTRST_b.ADC_n = 1; - - ADC->CFG0_b.PHASE_CTRL = init->ADC_PhaseCtrl; - ADC->CFG0_b.VSEN = init->ADC_VsenSelection; + assert_param(init); + assert_param(IS_ADC_PHASE_CTRL(init->ADC_PhaseCtrl)); + assert_param(IS_ADC_VSEN(init->ADC_VsenSelection)); + + SOFT_RESET->SOFTRST_b.ADC_n = 0; + SOFT_RESET->SOFTRST_b.ADC_n = 1; + + ADC->CFG0_b.PHASE_CTRL = init->ADC_PhaseCtrl; + ADC->CFG0_b.VSEN = init->ADC_VsenSelection; } void ADC_Enable(uint8_t adc, BOOL enable) { - assert_param(IS_ADC_ALL_PERIPH(adc)); - - adc_Reset(adc, enable); + assert_param(IS_ADC_ALL_PERIPH(adc)); + + adc_Reset(adc, enable); } void ADC_EnableInt(uint32_t Int, BOOL enable) { - assert_param(IS_ADC_INT(Int)); - - if (enable) { - ADC->INT_MASK &= ~Int; - } else { - ADC->INT_MASK |= Int; - } + assert_param(IS_ADC_INT(Int)); + + if (enable) { + ADC->INT_MASK &= ~Int; + } else { + ADC->INT_MASK |= Int; + } } BOOL ADC_GetIntStatus(uint32_t Int) { - assert_param(IS_ADC_INT(Int)); - - if (0 != (ADC->INT_STATUS & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_ADC_INT(Int)); + + if (0 != (ADC->INT_STATUS & Int)) { + return TRUE; + } + + return FALSE; } void ADC_ClearInt(uint32_t Int) { - assert_param(IS_ADC_INT(Int)); - - ADC->INT_STATUS = Int; + assert_param(IS_ADC_INT(Int)); + + ADC->INT_STATUS = Int; } BOOL ADC_StartConversion(uint8_t adc, uint8_t convMode, uint32_t channel) { - assert_param(IS_ADC_ALL_PERIPH(adc)); - assert_param(IS_ADC_CONVERSION(convMode)); - - if (adc == ADC_PERIPH_1) { - assert_param(IS_ADC1_CHANNEL(channel)); - if (ADC->BUSY_b.ADC1_BUSY) { - return FALSE; - } - - if (adc_IsMultiChannel(channel)) { - ADC->CFG_ADC1_b.SYSTEM_MODE = ADC_SYSTEM_MODE_SINGLE_CONV; - ADC->CFG_ADC1_b.MULTI_CHANNEL_BIT = channel; - ADC->CFG_ADC1_b.MULTI_CHANNEL_CONTINUE_SCAN = - (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) ? 1 : 0; - } else { - ADC->CFG_ADC1_b.SYSTEM_MODE = convMode; - - if (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) { - ADC->CFG_ADC1_b.CHANNEL_SEL = adc_GetChannel(channel); - } else { - ADC->CFG_ADC1_b.MULTI_CHANNEL_BIT = channel; - ADC->CFG_ADC1_b.MULTI_CHANNEL_CONTINUE_SCAN = 0; - } - } - - ADC->ADC1_START_b.EN = TRUE; - } else { - assert_param(IS_ADC2_CHANNEL(channel)); - if (ADC->BUSY_b.ADC2_BUSY) { - return FALSE; - } - - if (adc_IsMultiChannel(channel)) { - ADC->CFG_ADC2_b.SYSTEM_MODE = ADC_SYSTEM_MODE_SINGLE_CONV; - ADC->CFG_ADC2_b.MULTI_CHANNEL_BIT = channel; - ADC->CFG_ADC2_b.MULTI_CHANNEL_CONTINUE_SCAN = - (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) ? 1 : 0; - } else { - ADC->CFG_ADC2_b.SYSTEM_MODE = convMode; - - if (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) { - ADC->CFG_ADC2_b.CHANNEL_SEL = adc_GetChannel(channel); - } else { - ADC->CFG_ADC2_b.MULTI_CHANNEL_BIT = channel; - ADC->CFG_ADC2_b.MULTI_CHANNEL_CONTINUE_SCAN = 0; - } - } - - ADC->ADC2_START_b.EN = TRUE; - } - - return TRUE; + assert_param(IS_ADC_ALL_PERIPH(adc)); + assert_param(IS_ADC_CONVERSION(convMode)); + + if (adc == ADC_PERIPH_1) { + assert_param(IS_ADC1_CHANNEL(channel)); + if (ADC->BUSY_b.ADC1_BUSY) { + return FALSE; + } + + if (adc_IsMultiChannel(channel)) { + ADC->CFG_ADC1_b.SYSTEM_MODE = ADC_SYSTEM_MODE_SINGLE_CONV; + ADC->CFG_ADC1_b.MULTI_CHANNEL_BIT = channel; + ADC->CFG_ADC1_b.MULTI_CHANNEL_CONTINUE_SCAN = + (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) ? 1 : 0; + } else { + ADC->CFG_ADC1_b.SYSTEM_MODE = convMode; + + if (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) { + ADC->CFG_ADC1_b.CHANNEL_SEL = adc_GetChannel(channel); + } else { + ADC->CFG_ADC1_b.MULTI_CHANNEL_BIT = channel; + ADC->CFG_ADC1_b.MULTI_CHANNEL_CONTINUE_SCAN = 0; + } + } + + ADC->ADC1_START_b.EN = TRUE; + } else { + assert_param(IS_ADC2_CHANNEL(channel)); + if (ADC->BUSY_b.ADC2_BUSY) { + return FALSE; + } + + if (adc_IsMultiChannel(channel)) { + ADC->CFG_ADC2_b.SYSTEM_MODE = ADC_SYSTEM_MODE_SINGLE_CONV; + ADC->CFG_ADC2_b.MULTI_CHANNEL_BIT = channel; + ADC->CFG_ADC2_b.MULTI_CHANNEL_CONTINUE_SCAN = + (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) ? 1 : 0; + } else { + ADC->CFG_ADC2_b.SYSTEM_MODE = convMode; + + if (convMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV) { + ADC->CFG_ADC2_b.CHANNEL_SEL = adc_GetChannel(channel); + } else { + ADC->CFG_ADC2_b.MULTI_CHANNEL_BIT = channel; + ADC->CFG_ADC2_b.MULTI_CHANNEL_CONTINUE_SCAN = 0; + } + } + + ADC->ADC2_START_b.EN = TRUE; + } + + return TRUE; } BOOL ADC_StartCalibration(uint8_t adc, uint8_t calibration) { - assert_param(IS_ADC_ALL_PERIPH(adc)); - assert_param(IS_ADC_CALIBRATION(calibration)); - - if (adc == ADC_PERIPH_1) { - if (ADC->BUSY_b.ADC1_BUSY) { - return FALSE; - } - - ADC->CFG_ADC1_b.SYSTEM_MODE = calibration; - ADC->ADC1_START_b.EN = TRUE; - } else { - if (ADC->BUSY_b.ADC2_BUSY) { - return FALSE; - } + assert_param(IS_ADC_ALL_PERIPH(adc)); + assert_param(IS_ADC_CALIBRATION(calibration)); - ADC->CFG_ADC2_b.SYSTEM_MODE = calibration; - ADC->ADC2_START_b.EN = TRUE; - } - - return TRUE; + if (adc == ADC_PERIPH_1) { + if (ADC->BUSY_b.ADC1_BUSY) { + return FALSE; + } + + ADC->CFG_ADC1_b.SYSTEM_MODE = calibration; + ADC->ADC1_START_b.EN = TRUE; + } else { + if (ADC->BUSY_b.ADC2_BUSY) { + return FALSE; + } + + ADC->CFG_ADC2_b.SYSTEM_MODE = calibration; + ADC->ADC2_START_b.EN = TRUE; + } + + return TRUE; } void ADC_Stop(uint8_t adc) { - assert_param(IS_ADC_ALL_PERIPH(adc)); - - if (adc == ADC_PERIPH_1) { - if (IS_ADC_CONVERSION(ADC->CFG_ADC1_b.SYSTEM_MODE)) { - ADC->ADC1_STOP_b.EN = TRUE; - } - while (ADC->BUSY_b.ADC1_BUSY) ; - - ADC->ADC1_FIFO_CLEAR_b.CLEAR = TRUE; - //udelay(1000); - ADC->ADC1_FIFO_CLEAR_b.CLEAR = FALSE; - } else { - if (IS_ADC_CONVERSION(ADC->CFG_ADC2_b.SYSTEM_MODE)) { - ADC->ADC2_STOP_b.EN = TRUE; - } - while (ADC->BUSY_b.ADC2_BUSY) ; - - ADC->ADC2_FIFO_CLEAR_b.CLEAR = TRUE; - //udelay(1000); - ADC->ADC2_FIFO_CLEAR_b.CLEAR = FALSE; - } + assert_param(IS_ADC_ALL_PERIPH(adc)); + + if (adc == ADC_PERIPH_1) { + if (IS_ADC_CONVERSION(ADC->CFG_ADC1_b.SYSTEM_MODE)) { + ADC->ADC1_STOP_b.EN = TRUE; + } + while (ADC->BUSY_b.ADC1_BUSY) ; + + ADC->ADC1_FIFO_CLEAR_b.CLEAR = TRUE; + //udelay(1000); + ADC->ADC1_FIFO_CLEAR_b.CLEAR = FALSE; + } else { + if (IS_ADC_CONVERSION(ADC->CFG_ADC2_b.SYSTEM_MODE)) { + ADC->ADC2_STOP_b.EN = TRUE; + } + while (ADC->BUSY_b.ADC2_BUSY) ; + + ADC->ADC2_FIFO_CLEAR_b.CLEAR = TRUE; + //udelay(1000); + ADC->ADC2_FIFO_CLEAR_b.CLEAR = FALSE; + } } BOOL ADC_IsBusy(uint8_t adc) { - assert_param(IS_ADC_ALL_PERIPH(adc)); - - if (adc == ADC_PERIPH_1) { - if (ADC->BUSY_b.ADC1_BUSY) { - return TRUE; - } - } else { - if (ADC->BUSY_b.ADC2_BUSY) { - return TRUE; - } - } - - return FALSE; + assert_param(IS_ADC_ALL_PERIPH(adc)); + + if (adc == ADC_PERIPH_1) { + if (ADC->BUSY_b.ADC1_BUSY) { + return TRUE; + } + } else { + if (ADC->BUSY_b.ADC2_BUSY) { + return TRUE; + } + } + + return FALSE; } /* return value is actual read data size */ uint8_t ADC_Read(uint8_t adc, uint8_t size, ADC_Data* data) { - uint8_t count = 0; - uint8_t sysMode; - uint32_t tmp = 0; - assert_param(IS_ADC_ALL_PERIPH(adc)); - assert_param(data); - - if (adc == ADC_PERIPH_1) { - sysMode = ADC->CFG_ADC1_b.SYSTEM_MODE; - } else { - sysMode = ADC->CFG_ADC2_b.SYSTEM_MODE; - } - - if ((sysMode == ADC_SYSTEM_MODE_SINGLE_CONV) || - (sysMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV)) { - while (count < size) { - if (adc == ADC_PERIPH_1) { - if (ADC->STATUS_b.ADC1_READ_EMPTY) { - break; - } - - tmp = ADC->ADC1_FIFO_READ; - (data + count)->channel = 1 << ((tmp&0xf000) >> 12); - (data + count++)->data = (tmp & 0xfff); - } else { - if (ADC->STATUS_b.ADC2_READ_EMPTY) { - break; - } - tmp = ADC->ADC2_FIFO_READ; - (data + count)->channel = 1 << ((tmp&0xf000) >> 12); - (data + count++)->data = (tmp & 0xfff); - } - } - } else if (sysMode == ADC_CALIBRATION_OFFSET) { - if (adc == ADC_PERIPH_1) { - if (!ADC->BUSY_b.ADC1_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC1_OUT_OFFSET_CALIBRATION; - } - } else { - if (!ADC->BUSY_b.ADC2_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC2_OUT_OFFSET_CALIBRATION; - } - } - } else if (sysMode == ADC_CALIBRATION_NEGTIVE_GAIN) { - if (adc == ADC_PERIPH_1) { - if (!ADC->BUSY_b.ADC1_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC1_OUT_NEGTIVE_GAIN_CALIBRATION; - } - } else { - if (!ADC->BUSY_b.ADC2_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC2_OUT_NEGTIVE_GAIN_CALIBRATION; - } - } - } else { - if (adc == ADC_PERIPH_1) { - if (!ADC->BUSY_b.ADC1_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC1_OUT_POSITIVE_GAIN_CALIBRATION; - } - } else { - if (!ADC->BUSY_b.ADC2_BUSY) { - (data + count)->channel = ADC_CHANNEL_CALIBRATION; - (data + count++)->data = ADC->ADC2_OUT_POSITIVE_GAIN_CALIBRATION; - } - } - } - - return count; + uint8_t count = 0; + uint8_t sysMode; + uint32_t tmp = 0; + assert_param(IS_ADC_ALL_PERIPH(adc)); + assert_param(data); + + if (adc == ADC_PERIPH_1) { + sysMode = ADC->CFG_ADC1_b.SYSTEM_MODE; + } else { + sysMode = ADC->CFG_ADC2_b.SYSTEM_MODE; + } + + if ((sysMode == ADC_SYSTEM_MODE_SINGLE_CONV) || + (sysMode == ADC_SYSTEM_MODE_CONTINUOUS_CONV)) { + while (count < size) { + if (adc == ADC_PERIPH_1) { + if (ADC->STATUS_b.ADC1_READ_EMPTY) { + break; + } + + tmp = ADC->ADC1_FIFO_READ; + (data + count)->channel = 1 << ((tmp&0xf000) >> 12); + (data + count++)->data = (tmp & 0xfff); + } else { + if (ADC->STATUS_b.ADC2_READ_EMPTY) { + break; + } + tmp = ADC->ADC2_FIFO_READ; + (data + count)->channel = 1 << ((tmp&0xf000) >> 12); + (data + count++)->data = (tmp & 0xfff); + } + } + } else if (sysMode == ADC_CALIBRATION_OFFSET) { + if (adc == ADC_PERIPH_1) { + if (!ADC->BUSY_b.ADC1_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC1_OUT_OFFSET_CALIBRATION; + } + } else { + if (!ADC->BUSY_b.ADC2_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC2_OUT_OFFSET_CALIBRATION; + } + } + } else if (sysMode == ADC_CALIBRATION_NEGTIVE_GAIN) { + if (adc == ADC_PERIPH_1) { + if (!ADC->BUSY_b.ADC1_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC1_OUT_NEGTIVE_GAIN_CALIBRATION; + } + } else { + if (!ADC->BUSY_b.ADC2_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC2_OUT_NEGTIVE_GAIN_CALIBRATION; + } + } + } else { + if (adc == ADC_PERIPH_1) { + if (!ADC->BUSY_b.ADC1_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC1_OUT_POSITIVE_GAIN_CALIBRATION; + } + } else { + if (!ADC->BUSY_b.ADC2_BUSY) { + (data + count)->channel = ADC_CHANNEL_CALIBRATION; + (data + count++)->data = ADC->ADC2_OUT_POSITIVE_GAIN_CALIBRATION; + } + } + } + + return count; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_aes.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_aes.c index ea958d719c..bce2ea45e3 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_aes.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_aes.c @@ -1,53 +1,53 @@ /** - ***************************************************************************** - * @file cmem7_aes.c - * - * @brief CMEM7 AES source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_aes.c + * + * @brief CMEM7 AES source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_aes.h" BOOL AES_Decrypt(const void *src, void *dst, uint32_t len) { - uint32_t *po = dst; - const uint32_t *pi = src; + uint32_t *po = dst; + const uint32_t *pi = src; - if (len & 0xF) - return FALSE; + if (len & 0xF) + return FALSE; - AES->FIFO_CLEAR = 1; - AES->FIFO_CLEAR = 0; - GLOBAL_CTRL->AES_BURST_TYPE = 0x1; // Cannot be 0 - while (len > 0) { - while (0 == GLOBAL_CTRL->AES_STATUS_b.IDLE); // 0x41007010 - udelay(2); - GLOBAL_CTRL->AES_TARGET_ADDR = (uint32_t)po; // 0x41800000; - po += 4; - len -= 4 * sizeof(uint32_t); - while (0 == GLOBAL_CTRL->AES_STATUS_b.RD_EMPTY); // 0x41007010 - AES->FIFO = *pi++; - AES->FIFO = *pi++; - AES->FIFO = *pi++; - AES->FIFO = *pi++; - } - return TRUE; + AES->FIFO_CLEAR = 1; + AES->FIFO_CLEAR = 0; + GLOBAL_CTRL->AES_BURST_TYPE = 0x1; // Cannot be 0 + while (len > 0) { + while (0 == GLOBAL_CTRL->AES_STATUS_b.IDLE); // 0x41007010 + udelay(2); + GLOBAL_CTRL->AES_TARGET_ADDR = (uint32_t)po; // 0x41800000; + po += 4; + len -= 4 * sizeof(uint32_t); + while (0 == GLOBAL_CTRL->AES_STATUS_b.RD_EMPTY); // 0x41007010 + AES->FIFO = *pi++; + AES->FIFO = *pi++; + AES->FIFO = *pi++; + AES->FIFO = *pi++; + } + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_can.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_can.c index aa2766b4f2..d631e79c0d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_can.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_can.c @@ -1,36 +1,36 @@ /** - ***************************************************************************** - * @file cmem7_can.c - * - * @brief CMEM7 CAN source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_can.c + * + * @brief CMEM7 CAN source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_can.h" typedef struct { union { __IO uint8_t FI; /*!< Transmit Frame Information if writting or Receive Frame Information if reading, ACR[0] if reset mode */ - + struct { __IO uint8_t DLC : 4; /*!< byte number in the data */ uint8_t : 2; @@ -42,12 +42,12 @@ typedef struct { } CAN_FRAME_INFO; typedef struct { - union { + union { uint16_t ID; /*!< ID */ - + struct { uint16_t ID28_21 : 8; /*!< ID28 to ID21 */ - uint16_t : 4; + uint16_t : 4; uint16_t RTR : 1; /*!< if remote frame */ uint16_t ID20_18 : 3; /*!< ID20 to ID18 */ } ID_b; /*!< BitSize */ @@ -57,12 +57,12 @@ typedef struct { typedef struct { union { uint32_t ID; /*!< ID */ - + struct { uint32_t ID28_21 : 8; /*!< ID28 to ID21 */ uint32_t ID20_13 : 8; /*!< ID20 to ID13 */ - uint32_t ID12_5 : 8; /*!< ID12 to ID5 */ - uint32_t : 2; + uint32_t ID12_5 : 8; /*!< ID12 to ID5 */ + uint32_t : 2; uint32_t RTR : 1; /*!< if remote frame */ uint32_t ID4_0 : 5; /*!< ID4 to ID0 */ } ID_b; /*!< BitSize */ @@ -80,307 +80,307 @@ typedef struct { #define CAN_OCR_CLOCK 0x03 static BOOL can_SetFilter(CAN0_Type* CANx, CAN_FILTER *f1, CAN_FILTER *f2) { - if (!f1) { - return FALSE; - } - - if (!IS_CAN_FLT_TYPE(f1->type)) { - return FALSE; - } - - if(IS_CAN_FLT_DUAL(f1->type)) { - if (!f2 || IS_CAN_FLT_SINGLE(f2->type)) { - return FALSE; - } - } - - if (f1->type == CAN_FLT_STANDARD_SINGLE) { - CANx->FI_OR_ACR0 = f1->ACCEPT.sf.ID28_18 >> 3; - CANx->DI0_OR_ACR1 = (f1->ACCEPT.sf.ID28_18 & 0x07) << 5; - CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.RTR << 4; - CANx->DI1_OR_ACR2 = f1->ACCEPT.sf.data1; - CANx->DI2_OR_ACR3 = f1->ACCEPT.sf.data2; - - CANx->DI3_OR_AMR0 = f1->MASK.sf.ID28_18 >> 3; - CANx->DI4_OR_AMR1 = (f1->MASK.sf.ID28_18 & 0x07) << 5; - CANx->DI4_OR_AMR1 |= f1->MASK.sf.RTR << 4; - CANx->DI5_OR_AMR2 = f1->MASK.sf.data1; - CANx->DI6_OR_AMR3 = f1->MASK.sf.data2; - } else if (f1->type == CAN_FLT_STANDARD_DUAL) { - CANx->FI_OR_ACR0 = f1->ACCEPT.sf.ID28_18 >> 3; - CANx->DI0_OR_ACR1 = (f1->ACCEPT.sf.ID28_18 & 0x07) << 5; - CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.RTR << 4; - CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.data1 >> 4; - CANx->DI2_OR_ACR3 = f1->ACCEPT.sf.data1 & 0x0F; - - CANx->DI3_OR_AMR0 = f1->MASK.sf.ID28_18 >> 3; - CANx->DI4_OR_AMR1 = (f1->MASK.sf.ID28_18 & 0x07) << 5; - CANx->DI4_OR_AMR1 |= f1->MASK.sf.RTR << 4; - CANx->DI4_OR_AMR1 = f1->MASK.sf.data1 >> 4; - CANx->DI6_OR_AMR3 = f1->MASK.sf.data1 & 0x0F; - } else if (f1->type == CAN_FLT_EXTENDED_SINGLE) { - CANx->FI_OR_ACR0 = f1->ACCEPT.ef.ID28_13 >> 8; - CANx->DI0_OR_ACR1 = f1->ACCEPT.ef.ID28_13 & 0xFF; - CANx->DI1_OR_ACR2 = f1->ACCEPT.ef.ID12_0 >> 5; - CANx->DI2_OR_ACR3 = (f1->ACCEPT.ef.ID12_0 & 0x1F) << 3; - CANx->DI2_OR_ACR3 |= f1->ACCEPT.ef.RTR << 2; - - CANx->DI3_OR_AMR0 = f1->MASK.ef.ID28_13 >> 8; - CANx->DI4_OR_AMR1 = f1->MASK.ef.ID28_13 & 0xFF; - CANx->DI5_OR_AMR2 = f1->MASK.ef.ID12_0 >> 5; - CANx->DI6_OR_AMR3 = (f1->MASK.ef.ID12_0 & 0x1F) << 3; - CANx->DI6_OR_AMR3 |= f1->MASK.ef.RTR << 2; - } else { - CANx->FI_OR_ACR0 = f1->ACCEPT.ef.ID28_13 >> 8; - CANx->DI0_OR_ACR1 = f1->ACCEPT.ef.ID28_13 & 0xFF; - - CANx->DI3_OR_AMR0 = f1->MASK.ef.ID28_13 >> 8; - CANx->DI4_OR_AMR1 = f1->MASK.ef.ID28_13 & 0xFF; - } - - if (IS_CAN_FLT_DUAL(f1->type)) { - if (f2->type == CAN_FLT_STANDARD_DUAL) { - CANx->DI1_OR_ACR2 = f2->ACCEPT.sf.ID28_18 >> 3; - CANx->DI2_OR_ACR3 |= (f2->ACCEPT.sf.ID28_18 & 0x07) << 5; - CANx->DI2_OR_ACR3 |= f2->ACCEPT.sf.RTR << 4; - - CANx->DI5_OR_AMR2 = f2->MASK.sf.ID28_18 >> 3; - CANx->DI6_OR_AMR3 |= (f2->MASK.sf.ID28_18 & 0x07) << 5; - CANx->DI6_OR_AMR3 |= f2->MASK.sf.RTR << 4; - } else { - CANx->DI1_OR_ACR2 = f2->ACCEPT.ef.ID28_13 >> 8; - CANx->DI2_OR_ACR3 = f2->ACCEPT.ef.ID28_13 & 0xFF; - - CANx->DI5_OR_AMR2 = f2->MASK.ef.ID28_13 >> 8; - CANx->DI6_OR_AMR3 = f2->MASK.ef.ID28_13 & 0xFF; - } - } - - if (IS_CAN_FLT_SINGLE(f1->type)) { - CANx->MODE_b.AFM = 1; - } else { - CANx->MODE_b.AFM = 0; - } - - return TRUE; + if (!f1) { + return FALSE; + } + + if (!IS_CAN_FLT_TYPE(f1->type)) { + return FALSE; + } + + if(IS_CAN_FLT_DUAL(f1->type)) { + if (!f2 || IS_CAN_FLT_SINGLE(f2->type)) { + return FALSE; + } + } + + if (f1->type == CAN_FLT_STANDARD_SINGLE) { + CANx->FI_OR_ACR0 = f1->ACCEPT.sf.ID28_18 >> 3; + CANx->DI0_OR_ACR1 = (f1->ACCEPT.sf.ID28_18 & 0x07) << 5; + CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.RTR << 4; + CANx->DI1_OR_ACR2 = f1->ACCEPT.sf.data1; + CANx->DI2_OR_ACR3 = f1->ACCEPT.sf.data2; + + CANx->DI3_OR_AMR0 = f1->MASK.sf.ID28_18 >> 3; + CANx->DI4_OR_AMR1 = (f1->MASK.sf.ID28_18 & 0x07) << 5; + CANx->DI4_OR_AMR1 |= f1->MASK.sf.RTR << 4; + CANx->DI5_OR_AMR2 = f1->MASK.sf.data1; + CANx->DI6_OR_AMR3 = f1->MASK.sf.data2; + } else if (f1->type == CAN_FLT_STANDARD_DUAL) { + CANx->FI_OR_ACR0 = f1->ACCEPT.sf.ID28_18 >> 3; + CANx->DI0_OR_ACR1 = (f1->ACCEPT.sf.ID28_18 & 0x07) << 5; + CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.RTR << 4; + CANx->DI0_OR_ACR1 |= f1->ACCEPT.sf.data1 >> 4; + CANx->DI2_OR_ACR3 = f1->ACCEPT.sf.data1 & 0x0F; + + CANx->DI3_OR_AMR0 = f1->MASK.sf.ID28_18 >> 3; + CANx->DI4_OR_AMR1 = (f1->MASK.sf.ID28_18 & 0x07) << 5; + CANx->DI4_OR_AMR1 |= f1->MASK.sf.RTR << 4; + CANx->DI4_OR_AMR1 = f1->MASK.sf.data1 >> 4; + CANx->DI6_OR_AMR3 = f1->MASK.sf.data1 & 0x0F; + } else if (f1->type == CAN_FLT_EXTENDED_SINGLE) { + CANx->FI_OR_ACR0 = f1->ACCEPT.ef.ID28_13 >> 8; + CANx->DI0_OR_ACR1 = f1->ACCEPT.ef.ID28_13 & 0xFF; + CANx->DI1_OR_ACR2 = f1->ACCEPT.ef.ID12_0 >> 5; + CANx->DI2_OR_ACR3 = (f1->ACCEPT.ef.ID12_0 & 0x1F) << 3; + CANx->DI2_OR_ACR3 |= f1->ACCEPT.ef.RTR << 2; + + CANx->DI3_OR_AMR0 = f1->MASK.ef.ID28_13 >> 8; + CANx->DI4_OR_AMR1 = f1->MASK.ef.ID28_13 & 0xFF; + CANx->DI5_OR_AMR2 = f1->MASK.ef.ID12_0 >> 5; + CANx->DI6_OR_AMR3 = (f1->MASK.ef.ID12_0 & 0x1F) << 3; + CANx->DI6_OR_AMR3 |= f1->MASK.ef.RTR << 2; + } else { + CANx->FI_OR_ACR0 = f1->ACCEPT.ef.ID28_13 >> 8; + CANx->DI0_OR_ACR1 = f1->ACCEPT.ef.ID28_13 & 0xFF; + + CANx->DI3_OR_AMR0 = f1->MASK.ef.ID28_13 >> 8; + CANx->DI4_OR_AMR1 = f1->MASK.ef.ID28_13 & 0xFF; + } + + if (IS_CAN_FLT_DUAL(f1->type)) { + if (f2->type == CAN_FLT_STANDARD_DUAL) { + CANx->DI1_OR_ACR2 = f2->ACCEPT.sf.ID28_18 >> 3; + CANx->DI2_OR_ACR3 |= (f2->ACCEPT.sf.ID28_18 & 0x07) << 5; + CANx->DI2_OR_ACR3 |= f2->ACCEPT.sf.RTR << 4; + + CANx->DI5_OR_AMR2 = f2->MASK.sf.ID28_18 >> 3; + CANx->DI6_OR_AMR3 |= (f2->MASK.sf.ID28_18 & 0x07) << 5; + CANx->DI6_OR_AMR3 |= f2->MASK.sf.RTR << 4; + } else { + CANx->DI1_OR_ACR2 = f2->ACCEPT.ef.ID28_13 >> 8; + CANx->DI2_OR_ACR3 = f2->ACCEPT.ef.ID28_13 & 0xFF; + + CANx->DI5_OR_AMR2 = f2->MASK.ef.ID28_13 >> 8; + CANx->DI6_OR_AMR3 = f2->MASK.ef.ID28_13 & 0xFF; + } + } + + if (IS_CAN_FLT_SINGLE(f1->type)) { + CANx->MODE_b.AFM = 1; + } else { + CANx->MODE_b.AFM = 0; + } + + return TRUE; } -BOOL CAN_Init(CAN0_Type* CANx, CAN_InitTypeDef* Init, +BOOL CAN_Init(CAN0_Type* CANx, CAN_InitTypeDef* Init, CAN_FILTER *f1, CAN_FILTER *f2) { - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(Init); - assert_param(IS_CAN_CDR_DIV(Init->CAN_ClockDiv)); - - /* Quit to sleep mode in operation mode */ - if (CANx->MODE_b.SM) { - CANx->MODE_b.RM = FALSE; - CANx->MODE_b.SM = FALSE; - } - - /* switch to reset mode to set parameter */ - CANx->MODE_b.RM = TRUE; + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(Init); + assert_param(IS_CAN_CDR_DIV(Init->CAN_ClockDiv)); + + /* Quit to sleep mode in operation mode */ + if (CANx->MODE_b.SM) { + CANx->MODE_b.RM = FALSE; + CANx->MODE_b.SM = FALSE; + } + + /* switch to reset mode to set parameter */ + CANx->MODE_b.RM = TRUE; + + /* disable all interrupts and clear except receive interrupt */ + { + uint8_t tmp; + CANx->INT_EN &= ~CAN_INT_All; + tmp = CANx->INT; + tmp = tmp; + } + + CANx->MODE_b.LOM = (Init->CAN_TxEn) ? FALSE : TRUE; + + CANx->MODE_b.STM = Init->CAN_Loopback; + + CANx->CDR_b.OFF = FALSE; + CANx->CDR_b.DIVIDER = Init->CAN_ClockDiv; + + CANx->BTR0_b.BRP = Init->CAN_Prescaler; + CANx->BTR0_b.SJW = Init->CAN_SJW; + + CANx->BTR1_b.TSEG1 = Init->CAN_TSEG1; + CANx->BTR1_b.TSEG2 = Init->CAN_TSEG2; + CANx->BTR1_b.SAM = !Init->CAN_HighSpeed; + + CANx->OCR_b.MODE = CAN_OCR_CLOCK; - /* disable all interrupts and clear except receive interrupt */ - { - uint8_t tmp; - CANx->INT_EN &= ~CAN_INT_All; - tmp = CANx->INT; - tmp = tmp; - } - - CANx->MODE_b.LOM = (Init->CAN_TxEn) ? FALSE : TRUE; - - CANx->MODE_b.STM = Init->CAN_Loopback; - - CANx->CDR_b.OFF = FALSE; - CANx->CDR_b.DIVIDER = Init->CAN_ClockDiv; - - CANx->BTR0_b.BRP = Init->CAN_Prescaler; - CANx->BTR0_b.SJW = Init->CAN_SJW; - - CANx->BTR1_b.TSEG1 = Init->CAN_TSEG1; - CANx->BTR1_b.TSEG2 = Init->CAN_TSEG2; - CANx->BTR1_b.SAM = !Init->CAN_HighSpeed; - - CANx->OCR_b.MODE = CAN_OCR_CLOCK; - if (!can_SetFilter(CANx, f1, f2)) { - return FALSE; - } - - /* switch to operation mode */ - CANx->MODE_b.RM = FALSE; + return FALSE; + } - return TRUE; + /* switch to operation mode */ + CANx->MODE_b.RM = FALSE; + + return TRUE; } void CAN_SetSleepMode(CAN0_Type* CANx, BOOL enable) { - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* switch to operation mode */ - CANx->MODE_b.RM = FALSE; - - CANx->MODE_b.SM = enable; + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* switch to operation mode */ + CANx->MODE_b.RM = FALSE; + + CANx->MODE_b.SM = enable; } void CAN_EnableInt(CAN0_Type* CANx, uint32_t Int, BOOL enable) { assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_INT(Int)); - - if (enable) { - CANx->INT_EN |= CAN_INT_All; - } else { - CANx->INT_EN &= ~CAN_INT_All; - } + assert_param(IS_CAN_INT(Int)); + + if (enable) { + CANx->INT_EN |= CAN_INT_All; + } else { + CANx->INT_EN &= ~CAN_INT_All; + } } uint8_t CAN_GetIntStatus(CAN0_Type* CANx) { - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - return CANx->INT; + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + return CANx->INT; } BOOL CAN_Transmit(CAN0_Type* CANx, CAN_Frame* frame) { - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - if (!frame) { - return FALSE; - } - - if (CANx->MODE_b.LOM) { - return FALSE; - } - - if (CANx->MODE_b.SM) { - CANx->MODE_b.RM = FALSE; - CANx->MODE_b.SM = FALSE; - } - - { - CAN_FRAME_INFO fi; - - fi.U.FI_b.FF = !frame->SFF; - fi.U.FI_b.RTR = frame->RTR; - fi.U.FI_b.DLC = frame->DLC; + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (!frame) { + return FALSE; + } + + if (CANx->MODE_b.LOM) { + return FALSE; + } + + if (CANx->MODE_b.SM) { + CANx->MODE_b.RM = FALSE; + CANx->MODE_b.SM = FALSE; + } + + { + CAN_FRAME_INFO fi; + + fi.U.FI_b.FF = !frame->SFF; + fi.U.FI_b.RTR = frame->RTR; + fi.U.FI_b.DLC = frame->DLC; - CANx->FI_OR_ACR0 = fi.U.FI; + CANx->FI_OR_ACR0 = fi.U.FI; } - + if (frame->SFF) { - CAN_STANDARD_ID id; - - id.U.ID_b.ID28_21 = frame->Id >> 3; - id.U.ID_b.RTR = frame->RTR; - id.U.ID_b.ID20_18 = frame->Id & 0x07; - - CANx->DI0_OR_ACR1 = id.U.ID & 0xFF; - CANx->DI1_OR_ACR2 = id.U.ID >> 8; - - CANx->DI2_OR_ACR3 = frame->Data[0]; - CANx->DI3_OR_AMR0 = frame->Data[1]; - CANx->DI4_OR_AMR1 = frame->Data[2]; - CANx->DI5_OR_AMR2 = frame->Data[3]; - CANx->DI6_OR_AMR3 = frame->Data[4]; - CANx->DI7 = frame->Data[5]; - CANx->DI8 = frame->Data[6]; - CANx->DI9 = frame->Data[7]; - } else { - CAN_EXTENDED_ID id; - - id.U.ID_b.ID28_21 = frame->Id >> 21; - id.U.ID_b.ID20_13 = (frame->Id >> 13) & 0xFF; - id.U.ID_b.ID12_5 = (frame->Id >> 5) & 0xFF; - id.U.ID_b.RTR = frame->RTR; - id.U.ID_b.ID4_0 = frame->Id & 0x1F; - - CANx->DI0_OR_ACR1 = id.U.ID & 0xFF; - CANx->DI1_OR_ACR2 = (id.U.ID >> 8) & 0xFF; - CANx->DI2_OR_ACR3 = (id.U.ID >> 16) & 0xFF; - CANx->DI3_OR_AMR0 = (id.U.ID >> 24) & 0xFF; - - CANx->DI4_OR_AMR1 = frame->Data[0]; - CANx->DI5_OR_AMR2 = frame->Data[1]; - CANx->DI6_OR_AMR3 = frame->Data[2]; - CANx->DI7 = frame->Data[3]; - CANx->DI8 = frame->Data[4]; - CANx->DI9 = frame->Data[5]; - CANx->DI10 = frame->Data[6]; - CANx->DI11 = frame->Data[7]; - } + CAN_STANDARD_ID id; + + id.U.ID_b.ID28_21 = frame->Id >> 3; + id.U.ID_b.RTR = frame->RTR; + id.U.ID_b.ID20_18 = frame->Id & 0x07; + + CANx->DI0_OR_ACR1 = id.U.ID & 0xFF; + CANx->DI1_OR_ACR2 = id.U.ID >> 8; + + CANx->DI2_OR_ACR3 = frame->Data[0]; + CANx->DI3_OR_AMR0 = frame->Data[1]; + CANx->DI4_OR_AMR1 = frame->Data[2]; + CANx->DI5_OR_AMR2 = frame->Data[3]; + CANx->DI6_OR_AMR3 = frame->Data[4]; + CANx->DI7 = frame->Data[5]; + CANx->DI8 = frame->Data[6]; + CANx->DI9 = frame->Data[7]; + } else { + CAN_EXTENDED_ID id; + + id.U.ID_b.ID28_21 = frame->Id >> 21; + id.U.ID_b.ID20_13 = (frame->Id >> 13) & 0xFF; + id.U.ID_b.ID12_5 = (frame->Id >> 5) & 0xFF; + id.U.ID_b.RTR = frame->RTR; + id.U.ID_b.ID4_0 = frame->Id & 0x1F; + + CANx->DI0_OR_ACR1 = id.U.ID & 0xFF; + CANx->DI1_OR_ACR2 = (id.U.ID >> 8) & 0xFF; + CANx->DI2_OR_ACR3 = (id.U.ID >> 16) & 0xFF; + CANx->DI3_OR_AMR0 = (id.U.ID >> 24) & 0xFF; + + CANx->DI4_OR_AMR1 = frame->Data[0]; + CANx->DI5_OR_AMR2 = frame->Data[1]; + CANx->DI6_OR_AMR3 = frame->Data[2]; + CANx->DI7 = frame->Data[3]; + CANx->DI8 = frame->Data[4]; + CANx->DI9 = frame->Data[5]; + CANx->DI10 = frame->Data[6]; + CANx->DI11 = frame->Data[7]; + } if (CANx->MODE_b.STM) { - CANx->CMD_b.SSR = TRUE; - } else { - CANx->CMD_b.TR = TRUE; - } + CANx->CMD_b.SSR = TRUE; + } else { + CANx->CMD_b.TR = TRUE; + } return TRUE; } BOOL CAN_Receive(CAN0_Type* CANx, CAN_Frame* frame) { - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - if (!frame) { - return FALSE; - } - - if (CANx->MODE_b.SM) { - CANx->MODE_b.RM = FALSE; - CANx->MODE_b.SM = FALSE; - } - - { - CAN_FRAME_INFO fi; - - fi.U.FI = CANx->FI_OR_ACR0; - - frame->SFF = fi.U.FI_b.FF ? FALSE : TRUE; - frame->RTR = fi.U.FI_b.RTR ? TRUE : FALSE; - frame->DLC = fi.U.FI_b.DLC; + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (!frame) { + return FALSE; + } + + if (CANx->MODE_b.SM) { + CANx->MODE_b.RM = FALSE; + CANx->MODE_b.SM = FALSE; + } + + { + CAN_FRAME_INFO fi; + + fi.U.FI = CANx->FI_OR_ACR0; + + frame->SFF = fi.U.FI_b.FF ? FALSE : TRUE; + frame->RTR = fi.U.FI_b.RTR ? TRUE : FALSE; + frame->DLC = fi.U.FI_b.DLC; } - + if (frame->SFF) { - CAN_STANDARD_ID id; - - id.U.ID = CANx->DI0_OR_ACR1; - id.U.ID |= CANx->DI1_OR_ACR2 << 8; - - frame->Id = id.U.ID_b.ID28_21 << 3; - frame->Id |= id.U.ID_b.ID20_18; - - frame->Data[0] = CANx->DI2_OR_ACR3; - frame->Data[1] = CANx->DI3_OR_AMR0; - frame->Data[2] = CANx->DI4_OR_AMR1; - frame->Data[3] = CANx->DI5_OR_AMR2; - frame->Data[4] = CANx->DI6_OR_AMR3; - frame->Data[5] = CANx->DI7; - frame->Data[6] = CANx->DI8; - frame->Data[7] = CANx->DI9; - } else { - CAN_EXTENDED_ID id; - - id.U.ID = CANx->DI0_OR_ACR1; - id.U.ID |= CANx->DI1_OR_ACR2 << 8; - id.U.ID |= CANx->DI2_OR_ACR3 << 16; - id.U.ID |= CANx->DI3_OR_AMR0 << 24; - + CAN_STANDARD_ID id; + + id.U.ID = CANx->DI0_OR_ACR1; + id.U.ID |= CANx->DI1_OR_ACR2 << 8; + + frame->Id = id.U.ID_b.ID28_21 << 3; + frame->Id |= id.U.ID_b.ID20_18; + + frame->Data[0] = CANx->DI2_OR_ACR3; + frame->Data[1] = CANx->DI3_OR_AMR0; + frame->Data[2] = CANx->DI4_OR_AMR1; + frame->Data[3] = CANx->DI5_OR_AMR2; + frame->Data[4] = CANx->DI6_OR_AMR3; + frame->Data[5] = CANx->DI7; + frame->Data[6] = CANx->DI8; + frame->Data[7] = CANx->DI9; + } else { + CAN_EXTENDED_ID id; + + id.U.ID = CANx->DI0_OR_ACR1; + id.U.ID |= CANx->DI1_OR_ACR2 << 8; + id.U.ID |= CANx->DI2_OR_ACR3 << 16; + id.U.ID |= CANx->DI3_OR_AMR0 << 24; + frame->Id = id.U.ID_b.ID28_21 << 21; - frame->Id |= id.U.ID_b.ID20_13 << 13; - frame->Id |= id.U.ID_b.ID12_5 << 5; - frame->Id |= id.U.ID_b.ID4_0; - - frame->Data[0] = CANx->DI4_OR_AMR1; - frame->Data[1] = CANx->DI5_OR_AMR2; - frame->Data[2] = CANx->DI6_OR_AMR3; - frame->Data[3] = CANx->DI7; - frame->Data[4] = CANx->DI8; - frame->Data[5] = CANx->DI9; - frame->Data[6] = CANx->DI10; - frame->Data[7] = CANx->DI11; - } + frame->Id |= id.U.ID_b.ID20_13 << 13; + frame->Id |= id.U.ID_b.ID12_5 << 5; + frame->Id |= id.U.ID_b.ID4_0; + + frame->Data[0] = CANx->DI4_OR_AMR1; + frame->Data[1] = CANx->DI5_OR_AMR2; + frame->Data[2] = CANx->DI6_OR_AMR3; + frame->Data[3] = CANx->DI7; + frame->Data[4] = CANx->DI8; + frame->Data[5] = CANx->DI9; + frame->Data[6] = CANx->DI10; + frame->Data[7] = CANx->DI11; + } CANx->CMD_b.RRB = TRUE; - return TRUE; + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_ddr.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_ddr.c index a1556a39cd..14832d664d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_ddr.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_ddr.c @@ -1,32 +1,32 @@ /** - ***************************************************************************** - * @file cmem7_ddr.c - * - * @brief CMEM7 DDR source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_ddr.c + * + * @brief CMEM7 DDR source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_ddr.h" -#define MAX(a, b) ((a >= b) ? (a) : (b)) +#define MAX(a, b) ((a >= b) ? (a) : (b)) #define CAL_DDR3_CL(cl) ((cl>11)?(((cl-12)<<MR_CL_OFFSET)|0x4):((cl-4)<<MR_CL_OFFSET)) #define CHIP_MIN_CAPACITY 32 @@ -40,8 +40,8 @@ /** @defgroup DDR time * @{ */ - #define POWER_UP_NOP 200*1000 /*ns*//*JEDEC Standard No. 79-2E page 17 */ - #define PRE_ALL_NOP 400 /*ns*/ + #define POWER_UP_NOP 200*1000 /*ns*//*JEDEC Standard No. 79-2E page 17 */ + #define PRE_ALL_NOP 400 /*ns*/ #define POWER_UP_MIN_CK 200 #define DDR2_TMRD 2 /*JEDEC Standard No. 79-2E page 80 */ #define DDR3_TMRD 4 /*JEDEC Standard No. 79-2E page 80 */ @@ -50,41 +50,41 @@ #define DDR3_TZQINIT_CK 512 /*JEDEC Standard No. 79-3E page 171 table 68 */ #define DDR3_TZQINIT 640 /*ns*/ /*JEDEC Standard No. 79-3E page 171 table 68 */ #define DDR3_TDLLK_CK 512 /*JEDEC Standard No. 79-3E page 171 table 68 */ - #define RSTH_NOP 500*1000 /*ns*//*JEDEC Standard No. 79-3E page 20 */ + #define RSTH_NOP 500*1000 /*ns*//*JEDEC Standard No. 79-3E page 20 */ #define DDR_TREF 7800 /*ns*/ /** * @} */ #ifndef NULL -#define NULL 0 +#define NULL 0 #endif /** @defgroup DDRC_SW_PROC_CMD * @{ */ #define SW_CMD_NO_PARM 0 -#define SW_CMD_DES 0x0 /*des 5'b00000 [31:29]=3'b000 [28:0] DES time cke hold*/ -#define SW_CMD_NOP 0x20000000 /*nop 5'b00100 [31:29]=3'b001 [28:0] NOP time cke hold*/ -#define SW_CMD_DESCKE 0x40000000 /*descke 5'b01000 [31:29]=3'b010 [28:0] DES time change cke high*/ -#define SW_CMD_NOPCKE 0x60000000 /*nopcke 5'b01100 [31:29]=3'b011 [28:0] NOP time change cke high*/ -#define SW_CMD_PREA 0x80000000 /*nopcke 5'b10000 [31:27]=5'b10000 */ +#define SW_CMD_DES 0x0 /*des 5'b00000 [31:29]=3'b000 [28:0] DES time cke hold*/ +#define SW_CMD_NOP 0x20000000 /*nop 5'b00100 [31:29]=3'b001 [28:0] NOP time cke hold*/ +#define SW_CMD_DESCKE 0x40000000 /*descke 5'b01000 [31:29]=3'b010 [28:0] DES time change cke high*/ +#define SW_CMD_NOPCKE 0x60000000 /*nopcke 5'b01100 [31:29]=3'b011 [28:0] NOP time change cke high*/ +#define SW_CMD_PREA 0x80000000 /*nopcke 5'b10000 [31:27]=5'b10000 */ -#define SW_CMD_MR 0x88000000 /*JEDEC Standard No. 79-2E page 19 */ -#define SW_CMD_EMR1 0x88010000 /*JEDEC Standard No. 79-2E page 19 */ -#define SW_CMD_EMR2 0x88020000 -#define SW_CMD_EMR3 0x88030000 -#define SW_CMD_EMR1_TEST 0x88010004 -#define SW_CMD_REF 0x90000000 /*REF 5'b10010 [31:27]=5'b10010 */ +#define SW_CMD_MR 0x88000000 /*JEDEC Standard No. 79-2E page 19 */ +#define SW_CMD_EMR1 0x88010000 /*JEDEC Standard No. 79-2E page 19 */ +#define SW_CMD_EMR2 0x88020000 +#define SW_CMD_EMR3 0x88030000 +#define SW_CMD_EMR1_TEST 0x88010004 +#define SW_CMD_REF 0x90000000 /*REF 5'b10010 [31:27]=5'b10010 */ -#define SW_CMD_RSTH 0xb0000000 /*RSTH 5'b10110 [31:27]=5'b10110 */ -#define SW_CMD_ZQCL 0xb8000000 /*ZQCL 5'b10111 [31:27]=5'b10111 */ +#define SW_CMD_RSTH 0xb0000000 /*RSTH 5'b10110 [31:27]=5'b10110 */ +#define SW_CMD_ZQCL 0xb8000000 /*ZQCL 5'b10111 [31:27]=5'b10111 */ #define SW_CMD_DLL_EN 0x880103C4 #define SW_CMD_DLL_RST 0x88000953 /** * @} */ -/** @defgroup DDR2 mode register +/** @defgroup DDR2 mode register * @{ */ /*JEDEC Standard */ @@ -92,7 +92,7 @@ #define MR_BURST_LEN_8 0x3 #define MR_BT_SEQ 0x0 #define MR_BT_INT 0x08 -#define MR_CL_OFFSET 4 +#define MR_CL_OFFSET 4 #define MR_TM_NORMAL 0 #define MR_TM_TEST 0x80 #define MR_DLL_NO 0 @@ -106,418 +106,418 @@ */ const uint8_t DDR2_MODE[BUS_WIDTH_MAX][CHIP_NUM_MAX][CHIP_TYPE_MAX]= { - { - {0x20,0x23,0x28,0x2a,0x30,0x21,0x22,0x29,0x2b,0x31,0xff},/*chip x1*/ - {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ - },/*bus width x8*/ + { + {0x20,0x23,0x28,0x2a,0x30,0x21,0x22,0x29,0x2b,0x31,0xff},/*chip x1*/ + {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ + },/*bus width x8*/ - { - {0xff,0xff,0xff,0xff,0xff,0x25,0x26,0x2d,0x2f,0x33,0xff},/*chip x1*/ - {0x24,0x27,0x2c,0x2e,0x32,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ - }/*bus width x16*/ + { + {0xff,0xff,0xff,0xff,0xff,0x25,0x26,0x2d,0x2f,0x33,0xff},/*chip x1*/ + {0x24,0x27,0x2c,0x2e,0x32,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ + }/*bus width x16*/ }; const uint8_t DDR3_MODE[BUS_WIDTH_MAX][CHIP_NUM_MAX][CHIP_TYPE_MAX]= { - { - {0xff,0x00,0x01,0x02,0x03,0xff,0x04,0x05,0x06,0x07,0x10},/*chip x1*/ - {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ - },/*bus width x8*/ + { + {0xff,0x00,0x01,0x02,0x03,0xff,0x04,0x05,0x06,0x07,0x10},/*chip x1*/ + {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ + },/*bus width x8*/ - { - {0xff,0xff,0xff,0xff,0xff,0xff,0x0c,0x0d,0x0e,0x0f,0x11},/*chip x1*/ - {0xff,0x08,0x09,0x0a,0x0b,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ - }/*bus width x16*/ + { + {0xff,0xff,0xff,0xff,0xff,0xff,0x0c,0x0d,0x0e,0x0f,0x11},/*chip x1*/ + {0xff,0x08,0x09,0x0a,0x0b,0xff,0xff,0xff,0xff,0xff,0xff}/*chip x2*/ + }/*bus width x16*/ }; const DDR2MEM DDR2PREDEF[] = { - { -// #define DDR2_400C 4 // sg5E //DDR2-400C CL=4, tCK=5000 ps (dev-brd using) - /*tCK*/ 5000, - /*tCL*/ 6,//4, - /*RCD*/4, /*RP*/4, /*RC*/13, /*RAS*/9, /*WR*/3, /*RRD*/2, /*WTR*/11, /*RTP*/4, - /*FAW*/10, - }, - - { -// #define DDR2_800D 0 // sg25E //DDR2-800D CL=5, tCK=2500 ps - /*tCK*/ 2500, - /*tCL*/ 5, /*RCD*/5, /*RP*/5, /*RC*/24, //from sim model - /*RAS*/18, /*WR*/6, /*RRD*/4, /*WTR*/11, /*RTP*/5, - /*FAW*/30, //from sim model - }, { -// #define DDR2_667C 1 // sg3E //DDR2-667C CL=4, tCK=3000 ps - /*tCK*/ 3000, - /*tCL*/ 4, /*RCD*/4, /*RP*/4, /*RC*/19, /*RAS*/15, /*WR*/5, /*RRD*/4, /*WTR*/10, /*RTP*/5, - /*FAW*/17, - }, { -// #define DDR2_667D 2 // sg3 //DDR2-667D CL=5, tCK=3000 ps - /*tCK*/ 3000, - /*tCL*/ 5, /*RCD*/5, /*RP*/5, /*RC*/20, /*RAS*/15, /*WR*/5, /*RRD*/4, /*WTR*/3, /*RTP*/3, - /*FAW*/17, - }, { -// #define DDR2_533C 3 // sg37E //DDR2-533C CL=4, tCK=3750 ps - /*tCK*/ 3750, - /*tCL*/ 4, /*RCD*/4, /*RP*/4, /*RC*/16, /*RAS*/12, /*WR*/4, /*RRD*/3, /*WTR*/9, /*RTP*/4, - /*FAW*/14, - }, + { +// #define DDR2_400C 4 // sg5E //DDR2-400C CL=4, tCK=5000 ps (dev-brd using) + /*tCK*/ 5000, + /*tCL*/ 6,//4, + /*RCD*/4, /*RP*/4, /*RC*/13, /*RAS*/9, /*WR*/3, /*RRD*/2, /*WTR*/11, /*RTP*/4, + /*FAW*/10, + }, + + { +// #define DDR2_800D 0 // sg25E //DDR2-800D CL=5, tCK=2500 ps + /*tCK*/ 2500, + /*tCL*/ 5, /*RCD*/5, /*RP*/5, /*RC*/24, //from sim model + /*RAS*/18, /*WR*/6, /*RRD*/4, /*WTR*/11, /*RTP*/5, + /*FAW*/30, //from sim model + }, { +// #define DDR2_667C 1 // sg3E //DDR2-667C CL=4, tCK=3000 ps + /*tCK*/ 3000, + /*tCL*/ 4, /*RCD*/4, /*RP*/4, /*RC*/19, /*RAS*/15, /*WR*/5, /*RRD*/4, /*WTR*/10, /*RTP*/5, + /*FAW*/17, + }, { +// #define DDR2_667D 2 // sg3 //DDR2-667D CL=5, tCK=3000 ps + /*tCK*/ 3000, + /*tCL*/ 5, /*RCD*/5, /*RP*/5, /*RC*/20, /*RAS*/15, /*WR*/5, /*RRD*/4, /*WTR*/3, /*RTP*/3, + /*FAW*/17, + }, { +// #define DDR2_533C 3 // sg37E //DDR2-533C CL=4, tCK=3750 ps + /*tCK*/ 3750, + /*tCL*/ 4, /*RCD*/4, /*RP*/4, /*RC*/16, /*RAS*/12, /*WR*/4, /*RRD*/3, /*WTR*/9, /*RTP*/4, + /*FAW*/14, + }, }; const DDR3MEM DDR3PREDEF[] = { - { -// #define DDR3_400 14 // Base on DDR3-800D (5-5-5) tCK=5ns - /*tCK*/ 2500, - /*tCL*//*9*/ 5, /*WCL*/7/*cwl should be 5 ,but phy has 2 cycles delay.So,wcl should plus the 2 cycles delay.*/ , /*RCD*//*9*/5, /*RAS*//*24*/8, /*RP*//*9*/5, /*RC*//*33*/10, /*RRD*/ 100, - /*FAW*//*30*/10, /*WR*/5/*10*/, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, - } , + { +// #define DDR3_400 14 // Base on DDR3-800D (5-5-5) tCK=5ns + /*tCK*/ 2500, + /*tCL*//*9*/ 5, /*WCL*/7/*cwl should be 5 ,but phy has 2 cycles delay.So,wcl should plus the 2 cycles delay.*/ , /*RCD*//*9*/5, /*RAS*//*24*/8, /*RP*//*9*/5, /*RC*//*33*/10, /*RRD*/ 100, + /*FAW*//*30*/10, /*WR*/5/*10*/, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, + } , - { -// #define DDR3_667 15 // Base on DDR3-800D (5-5-5) tCK=5ns - /*tCK*/ 3000, - /*tCL*//*9*/ 5, /*WCL*/7 /*cwl should be 5 ,but phy has 2 cycles delay.So,wcl should plus the 2 cycles delay.*/ , /*RCD*//*9*/5, /*RAS*//*24*/30, /*RP*//*9*/5, /*RC*//*33*/60, /*RRD*/16, - /*FAW*//*30*/17, /*WR*/5/*10*/, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, - }, + { +// #define DDR3_667 15 // Base on DDR3-800D (5-5-5) tCK=5ns + /*tCK*/ 3000, + /*tCL*//*9*/ 5, /*WCL*/7 /*cwl should be 5 ,but phy has 2 cycles delay.So,wcl should plus the 2 cycles delay.*/ , /*RCD*//*9*/5, /*RAS*//*24*/30, /*RP*//*9*/5, /*RC*//*33*/60, /*RRD*/16, + /*FAW*//*30*/17, /*WR*/5/*10*/, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, + }, - { -// #define DDR3_2133N 0 // sg093 //DDR3-2133N (14-14-14) tCK=0.938ns - /*tCK*/ 938, - /*tCL*/ 14, /*WCL*/10, /*RCD*/14, /*RAS*/36, /*RP*/14, /*RC*/50, /*RRD*/7, - /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, - }, { -// #define DDR3_2133M 1 // sg093E //DDR3-2133M (13-13-13) tCK=0.938ns - /*tCK*/ 938, - /*tCL*/ 13, /*WCL*/10, /*RCD*/13, /*RAS*/36, /*RP*/13, /*RC*/49, /*RRD*/7, - /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, - }, { -// #define DDR3_2133L 2 // sg093F //DDR3-2133L (12-12-12) tCK=0.938ns - /*tCK*/ 938, - /*tCL*/ 12, /*WCL*/10, /*RCD*/12, /*RAS*/36, /*RP*/12, /*RC*/48, /*RRD*/7, - /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, - }, { -// #define DDR3_1866L 3 // sg107E //DDR3-1866L (12-12-12) tCK=1.07ns - /*tCK*/ 1070, - /*tCL*/ 12, /*WCL*/9, /*RCD*/12, /*RAS*/32, /*RP*/12, /*RC*/44, /*RRD*/6, - /*FAW*/33, /*WR*/14, /*RTP*/9, /*ZQCL*/300, /*ZQCS*/75, - }, { -// #define DDR3_1866K 4 // sg107F //DDR3-1866K (11-11-11) tCK=1.07ns - /*tCK*/ 1070, - /*tCL*/ 11, /*WCL*/9, /*RCD*/11, /*RAS*/32, /*RP*/11, /*RC*/43, /*RRD*/6, - /*FAW*/33, /*WR*/14, /*RTP*/9, /*ZQCL*/300, /*ZQCS*/75, - }, { -// #define DDR3_1600J 5 // sg125E //DDR3-1600J (10-10-10) tCK=1.25ns - /*tCK*/ 1250, - /*tCL*/ 10, /*WCL*/8, /*RCD*/10, /*RAS*/28, /*RP*/10, /*RC*/38, /*RRD*/6, - /*FAW*/32, /*WR*/12, /*RTP*/8, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_1600K 6 // sg125 //DDR3-1600K (11-11-11) tCK=1.25ns - /*tCK*/ 1250, - /*tCL*/ 11, /*WCL*/8, /*RCD*/11, /*RAS*/28, /*RP*/11, /*RC*/37, /*RRD*/6, - /*FAW*/32, /*WR*/12, /*RTP*/8, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_1333H 7 // sg15E //DDR3-1333H (9-9-9) tCK=1.5ns - /*tCK*/ 1500, - /*tCL*/ 9, /*WCL*/7, /*RCD*/9, /*RAS*/24, /*RP*/9, /*RC*/33, /*RRD*/5, - /*FAW*/30, /*WR*/10, /*RTP*/5, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_1333J 8 // sg15 //DDR3-1333J (10-10-10) tCK=1.5ns - /*tCK*/ 1500, - /*tCL*/ 10, /*WCL*/7, /*RCD*/10, /*RAS*/24, /*RP*/10, /*RC*/34, /*RRD*/5, - /*FAW*/30, /*WR*/10, /*RTP*/7, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_1066F 9 // sg187E //DDR3-1066F (7-7-7) tCK=1.875ns - /*tCK*/ 1875, - /*tCL*/ 7, /*WCL*/6, /*RCD*/7, /*RAS*/20, /*RP*/7, /*RC*/27, /*RRD*/6, - /*FAW*/27, /*WR*/8, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_1066G 10 // sg187 //DDR3-1066G (8-8-8) tCK=1.875ns - /*tCK*/ 1875, - /*tCL*/ 8, /*WCL*/6, /*RCD*/8, /*RAS*/20, /*RP*/8, /*RC*/28, /*RRD*/6, - /*FAW*/27, /*WR*/8, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_800D 11 // sg25E //DDR3-800D (5-5-5) tCK=2.5ns - /*tCK*/ 2500, - /*tCL*/ 5, /*WCL*/5, /*RCD*/5, /*RAS*/15, /*RP*/5, /*RC*/20, /*RRD*/4, - /*FAW*/17, /*WR*/5, /*RTP*/3, /*ZQCL*/256, /*ZQCS*/64, - }, { -// #define DDR3_800E 12 // sg25 //DDR3-800E (6-6-6) tCK=2.5ns - /*tCK*/ 2500, - /*tCL*/ 6, /*WCL*/5, /*RCD*/6, /*RAS*/15, /*RP*/6, /*RC*/21, /*RRD*/4, - /*FAW*/20, /*WR*/6, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, - }, - { - // #define DDR3_266MPW 13 // sg25 //DDR3-800E (5-5-5) tCK=2.5ns -// /*tCL*/ 5, /*WCL*/7, /*RCD*/5, /*RAS*/9/*37.5/4*/, /*RP*/5, /*RC*/13, /*RRD*/4, -// /*FAW 50/4*/15, /*WR6*/5, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, -// #define DDR3_250MPW 13 // sg25 //DDR3-800E (5-5-5) tCK=2.5ns - /*tCK*/ 2500, - /*tCL*/ 5, /*WCL*/7, /*RCD*/5, /*RAS*/9/*37.5/4*/, /*RP*/5, /*RC*/13, /*RRD*/4, - /*FAW 50/4*/15, /*WR6*/5, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, + { +// #define DDR3_2133N 0 // sg093 //DDR3-2133N (14-14-14) tCK=0.938ns + /*tCK*/ 938, + /*tCL*/ 14, /*WCL*/10, /*RCD*/14, /*RAS*/36, /*RP*/14, /*RC*/50, /*RRD*/7, + /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, + }, { +// #define DDR3_2133M 1 // sg093E //DDR3-2133M (13-13-13) tCK=0.938ns + /*tCK*/ 938, + /*tCL*/ 13, /*WCL*/10, /*RCD*/13, /*RAS*/36, /*RP*/13, /*RC*/49, /*RRD*/7, + /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, + }, { +// #define DDR3_2133L 2 // sg093F //DDR3-2133L (12-12-12) tCK=0.938ns + /*tCK*/ 938, + /*tCL*/ 12, /*WCL*/10, /*RCD*/12, /*RAS*/36, /*RP*/12, /*RC*/48, /*RRD*/7, + /*FAW*/38, /*WR*/16, /*RTP*/10, /*ZQCL*/342, /*ZQCS*/86, + }, { +// #define DDR3_1866L 3 // sg107E //DDR3-1866L (12-12-12) tCK=1.07ns + /*tCK*/ 1070, + /*tCL*/ 12, /*WCL*/9, /*RCD*/12, /*RAS*/32, /*RP*/12, /*RC*/44, /*RRD*/6, + /*FAW*/33, /*WR*/14, /*RTP*/9, /*ZQCL*/300, /*ZQCS*/75, + }, { +// #define DDR3_1866K 4 // sg107F //DDR3-1866K (11-11-11) tCK=1.07ns + /*tCK*/ 1070, + /*tCL*/ 11, /*WCL*/9, /*RCD*/11, /*RAS*/32, /*RP*/11, /*RC*/43, /*RRD*/6, + /*FAW*/33, /*WR*/14, /*RTP*/9, /*ZQCL*/300, /*ZQCS*/75, + }, { +// #define DDR3_1600J 5 // sg125E //DDR3-1600J (10-10-10) tCK=1.25ns + /*tCK*/ 1250, + /*tCL*/ 10, /*WCL*/8, /*RCD*/10, /*RAS*/28, /*RP*/10, /*RC*/38, /*RRD*/6, + /*FAW*/32, /*WR*/12, /*RTP*/8, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_1600K 6 // sg125 //DDR3-1600K (11-11-11) tCK=1.25ns + /*tCK*/ 1250, + /*tCL*/ 11, /*WCL*/8, /*RCD*/11, /*RAS*/28, /*RP*/11, /*RC*/37, /*RRD*/6, + /*FAW*/32, /*WR*/12, /*RTP*/8, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_1333H 7 // sg15E //DDR3-1333H (9-9-9) tCK=1.5ns + /*tCK*/ 1500, + /*tCL*/ 9, /*WCL*/7, /*RCD*/9, /*RAS*/24, /*RP*/9, /*RC*/33, /*RRD*/5, + /*FAW*/30, /*WR*/10, /*RTP*/5, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_1333J 8 // sg15 //DDR3-1333J (10-10-10) tCK=1.5ns + /*tCK*/ 1500, + /*tCL*/ 10, /*WCL*/7, /*RCD*/10, /*RAS*/24, /*RP*/10, /*RC*/34, /*RRD*/5, + /*FAW*/30, /*WR*/10, /*RTP*/7, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_1066F 9 // sg187E //DDR3-1066F (7-7-7) tCK=1.875ns + /*tCK*/ 1875, + /*tCL*/ 7, /*WCL*/6, /*RCD*/7, /*RAS*/20, /*RP*/7, /*RC*/27, /*RRD*/6, + /*FAW*/27, /*WR*/8, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_1066G 10 // sg187 //DDR3-1066G (8-8-8) tCK=1.875ns + /*tCK*/ 1875, + /*tCL*/ 8, /*WCL*/6, /*RCD*/8, /*RAS*/20, /*RP*/8, /*RC*/28, /*RRD*/6, + /*FAW*/27, /*WR*/8, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_800D 11 // sg25E //DDR3-800D (5-5-5) tCK=2.5ns + /*tCK*/ 2500, + /*tCL*/ 5, /*WCL*/5, /*RCD*/5, /*RAS*/15, /*RP*/5, /*RC*/20, /*RRD*/4, + /*FAW*/17, /*WR*/5, /*RTP*/3, /*ZQCL*/256, /*ZQCS*/64, + }, { +// #define DDR3_800E 12 // sg25 //DDR3-800E (6-6-6) tCK=2.5ns + /*tCK*/ 2500, + /*tCL*/ 6, /*WCL*/5, /*RCD*/6, /*RAS*/15, /*RP*/6, /*RC*/21, /*RRD*/4, + /*FAW*/20, /*WR*/6, /*RTP*/6, /*ZQCL*/256, /*ZQCS*/64, + }, + { + // #define DDR3_266MPW 13 // sg25 //DDR3-800E (5-5-5) tCK=2.5ns +// /*tCL*/ 5, /*WCL*/7, /*RCD*/5, /*RAS*/9/*37.5/4*/, /*RP*/5, /*RC*/13, /*RRD*/4, +// /*FAW 50/4*/15, /*WR6*/5, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, +// #define DDR3_250MPW 13 // sg25 //DDR3-800E (5-5-5) tCK=2.5ns + /*tCK*/ 2500, + /*tCL*/ 5, /*WCL*/7, /*RCD*/5, /*RAS*/9/*37.5/4*/, /*RP*/5, /*RC*/13, /*RRD*/4, + /*FAW 50/4*/15, /*WR6*/5, /*RTP*/4, /*ZQCL*/256, /*ZQCS*/64, - }, + }, }; uint32_t Get_DDR_Capacity(const MEM_CHIP_INFO *chip_info) { - uint32_t n=0; - uint32_t capacity=0; + uint32_t n=0; + uint32_t capacity=0; + + assert_param(chip_info); + n=(chip_info->Chip_type<_16Mbx16)?(chip_info->Chip_type):(chip_info->Chip_type-_16Mbx16); + capacity=(chip_info->Chip_type<_16Mbx16)?(CHIP_MIN_CAPACITY*(1<<n)*(chip_info->Chip_num+1)):(CHIP_MIN_CAPACITY*(1<<n)*(chip_info->Bus_width+1)/(BUS_WIDTH_16+1)); + return capacity; + - assert_param(chip_info); - n=(chip_info->Chip_type<_16Mbx16)?(chip_info->Chip_type):(chip_info->Chip_type-_16Mbx16); - capacity=(chip_info->Chip_type<_16Mbx16)?(CHIP_MIN_CAPACITY*(1<<n)*(chip_info->Chip_num+1)):(CHIP_MIN_CAPACITY*(1<<n)*(chip_info->Bus_width+1)/(BUS_WIDTH_16+1)); - return capacity; - - } uint32_t Calc_DDR_RFC(const MEM_CHIP_INFO *chip_info) { - uint32_t capacity=0; - uint32_t tRFC=0; - assert_param(chip_info); + uint32_t capacity=0; + uint32_t tRFC=0; + assert_param(chip_info); + + + capacity=Get_DDR_Capacity(chip_info); + if (chip_info->mem_type==MEM_DDR2) { + + switch(capacity){ + case CHIP_CAPACITY_32MB:tRFC=75;break; + case CHIP_CAPACITY_64MB:tRFC=105;break; + case CHIP_CAPACITY_128MB:tRFC=128;break; + case CHIP_CAPACITY_256MB:tRFC=195;break; + case CHIP_CAPACITY_512MB:tRFC=328;break; + } + } + else{ + switch(capacity){ + case CHIP_CAPACITY_64MB:tRFC=90;break; + case CHIP_CAPACITY_128MB:tRFC=110;break; + case CHIP_CAPACITY_256MB:tRFC=160;break; + case CHIP_CAPACITY_512MB:tRFC=300;break; + case CHIP_CAPACITY_1024MB:tRFC=350;break; + } + } + + return tRFC; - - capacity=Get_DDR_Capacity(chip_info); - if (chip_info->mem_type==MEM_DDR2) { - - switch(capacity){ - case CHIP_CAPACITY_32MB:tRFC=75;break; - case CHIP_CAPACITY_64MB:tRFC=105;break; - case CHIP_CAPACITY_128MB:tRFC=128;break; - case CHIP_CAPACITY_256MB:tRFC=195;break; - case CHIP_CAPACITY_512MB:tRFC=328;break; - } - } - else{ - switch(capacity){ - case CHIP_CAPACITY_64MB:tRFC=90;break; - case CHIP_CAPACITY_128MB:tRFC=110;break; - case CHIP_CAPACITY_256MB:tRFC=160;break; - case CHIP_CAPACITY_512MB:tRFC=300;break; - case CHIP_CAPACITY_1024MB:tRFC=350;break; - } - } - return tRFC; - - } static void DDR_Cmd(const uint32_t cmd ,const uint32_t param) { - DDRC->CMD =((cmd)|(param)); - + DDRC->CMD =((cmd)|(param)); + } static void DDR_Latency(const uint32_t cycle ) { - DDR_Cmd(SW_CMD_NOP,cycle); + DDR_Cmd(SW_CMD_NOP,cycle); } static void DDR2_conf(const MEM_CHIP_INFO *chip_info ,const void *ddr) { - uint32_t period=0; - const DDR2MEM *ptr = (const DDR2MEM *)ddr; - uint32_t tRFC=0; - - assert_param(ddr); - tRFC=Calc_DDR_RFC(chip_info); - period = (1000 / (SYSTEM_CLOCK_FREQ / 1000000)); - CFG_CTRL->DONE_b.CMD = 0x1; + uint32_t period=0; + const DDR2MEM *ptr = (const DDR2MEM *)ddr; + uint32_t tRFC=0; + + assert_param(ddr); + tRFC=Calc_DDR_RFC(chip_info); + period = (1000 / (SYSTEM_CLOCK_FREQ / 1000000)); + CFG_CTRL->DONE_b.CMD = 0x1; - DDRC->MODE_b.LANE = 1; - DDRC->MODE_b.B16 = 1; - DDRC->REF_b.TIME =( DDR_TREF/period); - DDRC->RP_b.RPA = 1; - DDRC->RFC_b.DI = (tRFC/period); - DDRC->PHUNG_b.MODE = 1; - DDRC->RD_SEL_b.PHY_SEL = 5; + DDRC->MODE_b.LANE = 1; + DDRC->MODE_b.B16 = 1; + DDRC->REF_b.TIME =( DDR_TREF/period); + DDRC->RP_b.RPA = 1; + DDRC->RFC_b.DI = (tRFC/period); + DDRC->PHUNG_b.MODE = 1; + DDRC->RD_SEL_b.PHY_SEL = 5; - DDRC->DQSEN0_b.DL = 2; - DDRC->DQSEN1_b.DL = 2; - DDRC->DQSEN2_b.DL = 2; - DDRC->DQSEN3_b.DL = 2; - DDRC->INTCTL_b.DONE = 1; - DDRC->INTCTL_b.ERR = 0; - DDRC->RDQ_b.L3 = DDRC->RDQ_b.L2 = DDRC->RDQ_b.L1 = DDRC->RDQ_b.L0 = 0x32; - DDRC->ITMDLY_b.I0 = DDRC->ITMDLY_b.IS0 = DDRC->ITMDLY_b.I1 = DDRC->ITMDLY_b.IS1 = - DDRC->ITMDLY_b.I2 = DDRC->ITMDLY_b.IS2 = DDRC->ITMDLY_b.I3 = DDRC->ITMDLY_b.IS3 = 3; + DDRC->DQSEN0_b.DL = 2; + DDRC->DQSEN1_b.DL = 2; + DDRC->DQSEN2_b.DL = 2; + DDRC->DQSEN3_b.DL = 2; + DDRC->INTCTL_b.DONE = 1; + DDRC->INTCTL_b.ERR = 0; + DDRC->RDQ_b.L3 = DDRC->RDQ_b.L2 = DDRC->RDQ_b.L1 = DDRC->RDQ_b.L0 = 0x32; + DDRC->ITMDLY_b.I0 = DDRC->ITMDLY_b.IS0 = DDRC->ITMDLY_b.I1 = DDRC->ITMDLY_b.IS1 = + DDRC->ITMDLY_b.I2 = DDRC->ITMDLY_b.IS2 = DDRC->ITMDLY_b.I3 = DDRC->ITMDLY_b.IS3 = 3; - - DDR_Latency((POWER_UP_NOP/period)); - DDR_Cmd(SW_CMD_NOPCKE,(PRE_ALL_NOP/period)); - DDR_Cmd(SW_CMD_PREA,NULL); - DDR_Latency(ptr->tRP);/*tRP*/ - DDR_Cmd(SW_CMD_EMR2,NULL); - DDR_Latency(DDR2_TMRD); - DDR_Cmd(SW_CMD_EMR3,NULL); - DDR_Latency(DDR2_TMRD); - DDR_Cmd(SW_CMD_DLL_EN,NULL); - DDR_Latency(DDR2_TMRD); - DDR_Cmd(SW_CMD_DLL_RST,NULL); - DDR_Latency(DDR2_TMRD); - DDR_Cmd(SW_CMD_PREA,NULL); - DDR_Latency(ptr->tRP); - DDR_Cmd(SW_CMD_REF,NULL); - DDR_Latency((tRFC/period));/*tRFC*/ - DDR_Cmd(SW_CMD_REF,NULL); - DDR_Latency((tRFC/period)); - DDR_Cmd(SW_CMD_MR,(((ptr->tWR-1)<<MR_WR_OFFSET)|(ptr->tCL<<MR_CL_OFFSET)|MR_BURST_LEN_8)); - DDR_Latency(POWER_UP_MIN_CK); - DDR_Cmd(SW_CMD_EMR1_TEST,NULL); - DDR_Latency(DDR2_TMRD); + + DDR_Latency((POWER_UP_NOP/period)); + DDR_Cmd(SW_CMD_NOPCKE,(PRE_ALL_NOP/period)); + DDR_Cmd(SW_CMD_PREA,NULL); + DDR_Latency(ptr->tRP);/*tRP*/ + DDR_Cmd(SW_CMD_EMR2,NULL); + DDR_Latency(DDR2_TMRD); + DDR_Cmd(SW_CMD_EMR3,NULL); + DDR_Latency(DDR2_TMRD); + DDR_Cmd(SW_CMD_DLL_EN,NULL); + DDR_Latency(DDR2_TMRD); + DDR_Cmd(SW_CMD_DLL_RST,NULL); + DDR_Latency(DDR2_TMRD); + DDR_Cmd(SW_CMD_PREA,NULL); + DDR_Latency(ptr->tRP); + DDR_Cmd(SW_CMD_REF,NULL); + DDR_Latency((tRFC/period));/*tRFC*/ + DDR_Cmd(SW_CMD_REF,NULL); + DDR_Latency((tRFC/period)); + DDR_Cmd(SW_CMD_MR,(((ptr->tWR-1)<<MR_WR_OFFSET)|(ptr->tCL<<MR_CL_OFFSET)|MR_BURST_LEN_8)); + DDR_Latency(POWER_UP_MIN_CK); + DDR_Cmd(SW_CMD_EMR1_TEST,NULL); + DDR_Latency(DDR2_TMRD); } static void DDR3_conf(const MEM_CHIP_INFO *chip_info ,const void *ddr) { - uint32_t period = 0; - uint32_t tRFC = 0; - const DDR3MEM *ptr = (const DDR3MEM *)ddr; + uint32_t period = 0; + uint32_t tRFC = 0; + const DDR3MEM *ptr = (const DDR3MEM *)ddr; + + tRFC = Calc_DDR_RFC(chip_info); + period = (1000 / (SYSTEM_CLOCK_FREQ / 1000000)); + + DDRC->MODE_b.LANE = 0x1; + DDRC->QUE_b.DEPTH=1; + DDRC->REF_b.TIME = (DDR_TREF / period);////// //2Gb periodic refresh interval 7.8us 7.8us/5ns + DDRC->REF_b.TRIG = 1; + DDRC->REF_b.THRD = 8; + DDRC->ZQCSR_b.EN = 1; + DDRC->ZQCSI = 128 * 1000000 / period; + DDRC->RP_b.RPA = 1; + DDRC->RFC_b.DI = (tRFC / period); - tRFC = Calc_DDR_RFC(chip_info); - period = (1000 / (SYSTEM_CLOCK_FREQ / 1000000)); - - DDRC->MODE_b.LANE = 0x1; - DDRC->QUE_b.DEPTH=1; - DDRC->REF_b.TIME = (DDR_TREF / period);////// //2Gb periodic refresh interval 7.8us 7.8us/5ns - DDRC->REF_b.TRIG = 1; - DDRC->REF_b.THRD = 8; - DDRC->ZQCSR_b.EN = 1; - DDRC->ZQCSI = 128 * 1000000 / period; - DDRC->RP_b.RPA = 1; - DDRC->RFC_b.DI = (tRFC / period); - - if (ptr->tCK == 2500) { // 200MHz - DDRC->RD_SEL_b.PHY_SEL = 5; - } else if (ptr->tCK == 3000) { // 333MHz - DDRC->RD_SEL_b.PHY_SEL = 6; - } - - DDRC->PHUNG_b.MODE = 1; - DDRC->DQSEN0_b.DL = 2; - DDRC->DQSEN1_b.DL = 2; - DDRC->DQSEN2_b.DL = 2; - DDRC->DQSEN3_b.DL = 2; + if (ptr->tCK == 2500) { // 200MHz + DDRC->RD_SEL_b.PHY_SEL = 5; + } else if (ptr->tCK == 3000) { // 333MHz + DDRC->RD_SEL_b.PHY_SEL = 6; + } - // config MR# - DDR_Latency((POWER_UP_NOP/period));//200us nop - DDR_Cmd(SW_CMD_RSTH,NULL);// RESET H - DDR_Latency((RSTH_NOP/period));// 500us nop - DDR_Cmd(SW_CMD_NOPCKE,((tRFC+10)/period));// cke high 170/tck tck txpr max(5nck, trfc(min) + 10ns) 2Gb refresh time 160ns - DDR_Cmd(SW_CMD_EMR2,((ptr->tWCL-5)<<MR2_CWL_OFFSET)); //MR2 - DDR_Latency(DDR3_TMRD);// tmrd 4nck - DDR_Cmd(SW_CMD_EMR3,NULL);// MR3 - DDR_Latency(DDR3_TMRD); // tmrd - DDR_Cmd(SW_CMD_EMR1,MR1_RZQ_4); // MR1 - DDR_Latency(DDR3_TMRD); // tmrd - DDR_Cmd(SW_CMD_MR,(MR_PPD_FAST|MR_DLL_YES|((ptr->tWR-1)<<MR_WR_OFFSET)|(CAL_DDR3_CL(ptr->tCL)))); - // MR0 - // A1 , A0 2'b0 fixed 8 - // A2 CL 0 - // A3 nibble sequential 0 Interleave 1 - // A6,A5,A4 CL 101 CL =9 - // A7 normal mode 0 - // A8 DLL reset 1 - // A11,A10,A9 wr=(twr/ck)=(15/3)=5 =001 - // A12 DLL control for precharge PD fast exit 1 - // MR0 =0xb50 - DDR_Latency(MAX(DDR3_TMOD_CK,(DDR3_TMOD/period)));// tmod max (12nck,15ns) - DDR_Cmd(SW_CMD_ZQCL,NULL);// ZQCL starting ZQ calibration - DDR_Latency(MAX(DDR3_TZQINIT_CK,(DDR3_TZQINIT/period))); // tdllk 512nck (should be 500nck) - DDR_Latency(DDR3_TDLLK_CK); // tZQinit max(512nck,640ns) + DDRC->PHUNG_b.MODE = 1; + DDRC->DQSEN0_b.DL = 2; + DDRC->DQSEN1_b.DL = 2; + DDRC->DQSEN2_b.DL = 2; + DDRC->DQSEN3_b.DL = 2; + + // config MR# + DDR_Latency((POWER_UP_NOP/period));//200us nop + DDR_Cmd(SW_CMD_RSTH,NULL);// RESET H + DDR_Latency((RSTH_NOP/period));// 500us nop + DDR_Cmd(SW_CMD_NOPCKE,((tRFC+10)/period));// cke high 170/tck tck txpr max(5nck, trfc(min) + 10ns) 2Gb refresh time 160ns + DDR_Cmd(SW_CMD_EMR2,((ptr->tWCL-5)<<MR2_CWL_OFFSET)); //MR2 + DDR_Latency(DDR3_TMRD);// tmrd 4nck + DDR_Cmd(SW_CMD_EMR3,NULL);// MR3 + DDR_Latency(DDR3_TMRD); // tmrd + DDR_Cmd(SW_CMD_EMR1,MR1_RZQ_4); // MR1 + DDR_Latency(DDR3_TMRD); // tmrd + DDR_Cmd(SW_CMD_MR,(MR_PPD_FAST|MR_DLL_YES|((ptr->tWR-1)<<MR_WR_OFFSET)|(CAL_DDR3_CL(ptr->tCL)))); + // MR0 + // A1 , A0 2'b0 fixed 8 + // A2 CL 0 + // A3 nibble sequential 0 Interleave 1 + // A6,A5,A4 CL 101 CL =9 + // A7 normal mode 0 + // A8 DLL reset 1 + // A11,A10,A9 wr=(twr/ck)=(15/3)=5 =001 + // A12 DLL control for precharge PD fast exit 1 + // MR0 =0xb50 + DDR_Latency(MAX(DDR3_TMOD_CK,(DDR3_TMOD/period)));// tmod max (12nck,15ns) + DDR_Cmd(SW_CMD_ZQCL,NULL);// ZQCL starting ZQ calibration + DDR_Latency(MAX(DDR3_TZQINIT_CK,(DDR3_TZQINIT/period))); // tdllk 512nck (should be 500nck) + DDR_Latency(DDR3_TDLLK_CK); // tZQinit max(512nck,640ns) } BOOL DDR_Init(const MEM_CHIP_INFO *chip_info, const void *ddr) { - uint32_t tCL, tWR, tWCL, tWTR, tCK,mode; - - assert_param(chip_info); - assert_param(ddr); - if((chip_info->Bus_width<BUS_WIDTH_MAX) - &&(chip_info->Chip_num<CHIP_NUM_MAX) - &&(chip_info->Chip_type< CHIP_TYPE_MAX)) - { - if(chip_info->mem_type==MEM_DDR2) - { - mode=DDR2_MODE[chip_info->Bus_width][chip_info->Chip_num][chip_info->Chip_type]; - } - else - { - mode=DDR3_MODE[chip_info->Bus_width][chip_info->Chip_num][chip_info->Chip_type]; - } - if(mode==0xff) - { - return FALSE; - } - - - } - else - { - return FALSE; - } - - - PDPROT->LOCK_b.EN = 0; - do { - CFG_CTRL->PDLLSTR_b.C2R1D = 0; // rst dll_c2r1 - udelay(10); - CFG_CTRL->PDLLSTR_b.C2R1D = 1; // releset rst - udelay(10); - } while ((PDLOCK->GCLK & 0x40) != 0x40); - PDPROT->LOCK_b.EN = 1; + uint32_t tCL, tWR, tWCL, tWTR, tCK,mode; + + assert_param(chip_info); + assert_param(ddr); + if((chip_info->Bus_width<BUS_WIDTH_MAX) + &&(chip_info->Chip_num<CHIP_NUM_MAX) + &&(chip_info->Chip_type< CHIP_TYPE_MAX)) + { + if(chip_info->mem_type==MEM_DDR2) + { + mode=DDR2_MODE[chip_info->Bus_width][chip_info->Chip_num][chip_info->Chip_type]; + } + else + { + mode=DDR3_MODE[chip_info->Bus_width][chip_info->Chip_num][chip_info->Chip_type]; + } + if(mode==0xff) + { + return FALSE; + } + + + } + else + { + return FALSE; + } + + + PDPROT->LOCK_b.EN = 0; + do { + CFG_CTRL->PDLLSTR_b.C2R1D = 0; // rst dll_c2r1 + udelay(10); + CFG_CTRL->PDLLSTR_b.C2R1D = 1; // releset rst + udelay(10); + } while ((PDLOCK->GCLK & 0x40) != 0x40); + PDPROT->LOCK_b.EN = 1; + + DDRC->MODE_b.MODE = mode; - DDRC->MODE_b.MODE = mode; + if (chip_info->mem_type==MEM_DDR2) { + const DDR2MEM *ptr = (const DDR2MEM *)ddr; + DDRC->RL_b.VAL = ptr->tCL; + DDRC->RCD_b.DI = ptr->tRCD; + DDRC->RP_b.DI = ptr->tRP; + DDRC->RC_b.DI = ptr->tRC; + DDRC->RAS_b.DI = ptr->tRAS; + tWR = ptr->tWR; + tWTR = ptr->tWTR; + DDRC->RRD_b.DI = ptr->tRRD; + DDRC->RTP_b.DI = ptr->tRTP; + DDRC->FAW_b.DI = ptr->tFAW; + DDR2_conf(chip_info,ptr); + } else { + const DDR3MEM *ptr = (const DDR3MEM *)ddr; + DDRC->RL_b.VAL = ptr->tCL; + tWCL = ptr->tWCL; + DDRC->RCD_b.DI = ptr->tRCD; + DDRC->RAS_b.DI = ptr->tRAS; + DDRC->RP_b.DI = ptr->tRP; + DDRC->RC_b.DI = ptr->tRC; + DDRC->RRD_b.DI = ptr->tRRD; + DDRC->FAW_b.DI = ptr->tFAW; + tWR = ptr->tWR; + tCK = ptr->tCK; + DDRC->RTP_b.DI = ptr->tRTP; + DDRC->ZQCL_b.DI = ptr->tZQoper; + DDRC->ZQCS_b.DI = ptr->tZQCS; + DDR3_conf(chip_info,ptr); + } - if (chip_info->mem_type==MEM_DDR2) { - const DDR2MEM *ptr = (const DDR2MEM *)ddr; - DDRC->RL_b.VAL = ptr->tCL; - DDRC->RCD_b.DI = ptr->tRCD; - DDRC->RP_b.DI = ptr->tRP; - DDRC->RC_b.DI = ptr->tRC; - DDRC->RAS_b.DI = ptr->tRAS; - tWR = ptr->tWR; - tWTR = ptr->tWTR; - DDRC->RRD_b.DI = ptr->tRRD; - DDRC->RTP_b.DI = ptr->tRTP; - DDRC->FAW_b.DI = ptr->tFAW; - DDR2_conf(chip_info,ptr); - } else { - const DDR3MEM *ptr = (const DDR3MEM *)ddr; - DDRC->RL_b.VAL = ptr->tCL; - tWCL = ptr->tWCL; - DDRC->RCD_b.DI = ptr->tRCD; - DDRC->RAS_b.DI = ptr->tRAS; - DDRC->RP_b.DI = ptr->tRP; - DDRC->RC_b.DI = ptr->tRC; - DDRC->RRD_b.DI = ptr->tRRD; - DDRC->FAW_b.DI = ptr->tFAW; - tWR = ptr->tWR; - tCK = ptr->tCK; - DDRC->RTP_b.DI = ptr->tRTP; - DDRC->ZQCL_b.DI = ptr->tZQoper; - DDRC->ZQCS_b.DI = ptr->tZQCS; - DDR3_conf(chip_info,ptr); - } + tCL = DDRC->RL_b.VAL; - tCL = DDRC->RL_b.VAL; + DDRC->WTR_b.DI = (DDRC->MODE_b.MODE & 0x20) ? + (tWCL + tWTR + (DDRC->BURST_b.LEN ? 2 : 4)) : + ((tCK * 4) > 7500) ? 18 : (tCK * 4 + 7500 - 1) / 7500; //4 - DDRC->WTR_b.DI = (DDRC->MODE_b.MODE & 0x20) ? - (tWCL + tWTR + (DDRC->BURST_b.LEN ? 2 : 4)) : - ((tCK * 4) > 7500) ? 18 : (tCK * 4 + 7500 - 1) / 7500; //4 + DDRC->CCD_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? 2 : 4) : 4; + DDRC->RTW_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? 4 : 6) : (tCL + DDRC->CCD_b.DI - tWCL + (DDRC->BURST_b.LEN ? 0 : 2)); + DDRC->WTP_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (tCL + tWR + (DDRC->BURST_b.LEN ? 1 : 3)) : (tWCL + tWR + (DDRC->BURST_b.LEN ? 2 : 4)); + DDRC->WL_b.VAL = (DDRC->MODE_b.MODE & 0x20) ? (MAX(tCL, 3) - 3) : (tWCL - 2); + DDRC->ODTH_b.DL = (DDRC->MODE_b.MODE & 0x20) ? (MAX(tCL, 4) - 4) : 0; + if (tCK == 2500) { // 200MHz + DDRC->ODTL_b.DL = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? (tCL - 1) : (tCL + 1)) : (DDRC->BURST_b.LEN ? 4 : 6); + } else if (tCK == 3000) { // 333MHz + DDRC->ODTL_b.DL = 0x1f; + } - DDRC->CCD_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? 2 : 4) : 4; - DDRC->RTW_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? 4 : 6) : (tCL + DDRC->CCD_b.DI - tWCL + (DDRC->BURST_b.LEN ? 0 : 2)); - DDRC->WTP_b.DI = (DDRC->MODE_b.MODE & 0x20) ? (tCL + tWR + (DDRC->BURST_b.LEN ? 1 : 3)) : (tWCL + tWR + (DDRC->BURST_b.LEN ? 2 : 4)); - DDRC->WL_b.VAL = (DDRC->MODE_b.MODE & 0x20) ? (MAX(tCL, 3) - 3) : (tWCL - 2); - DDRC->ODTH_b.DL = (DDRC->MODE_b.MODE & 0x20) ? (MAX(tCL, 4) - 4) : 0; - if (tCK == 2500) { // 200MHz - DDRC->ODTL_b.DL = (DDRC->MODE_b.MODE & 0x20) ? (DDRC->BURST_b.LEN ? (tCL - 1) : (tCL + 1)) : (DDRC->BURST_b.LEN ? 4 : 6); - } else if (tCK == 3000) { // 333MHz - DDRC->ODTL_b.DL = 0x1f; - } - - // DEBUG INFO HERE - DDRC->CTRL_b.STR = 1; + // DEBUG INFO HERE + DDRC->CTRL_b.STR = 1; - while (0 == DDRC->STA_b.EMPTY); - while(0 == DDRC->INTRAW_b.DONE); - DDRC->CTRL_b.STR = DDRC->CTRL_b.TO = 0; + while (0 == DDRC->STA_b.EMPTY); + while(0 == DDRC->INTRAW_b.DONE); + DDRC->CTRL_b.STR = DDRC->CTRL_b.TO = 0; - return TRUE; + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_dma.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_dma.c index c15957ab2f..061b907dd9 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_dma.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_dma.c @@ -1,72 +1,72 @@ /** - ***************************************************************************** - * @file cmem7_dma.c - * - * @brief CMEM7 DMA source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_dma.c + * + * @brief CMEM7 DMA source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_dma.h" typedef struct { - union { - uint32_t CTL_LOW; - + union { + uint32_t CTL_LOW; + struct { - uint32_t INT_EN : 1; - uint32_t DST_TR_WIDTH: 3; - uint32_t SRC_TR_WIDTH: 3; - uint32_t DINC : 2; - uint32_t SINC : 2; - uint32_t DEST_MSIZE : 3; - uint32_t SRC_MSIZE : 3; - uint32_t SRC_GATHER_EN: 1; - uint32_t DST_SCATTER_EN: 1; + uint32_t INT_EN : 1; + uint32_t DST_TR_WIDTH: 3; + uint32_t SRC_TR_WIDTH: 3; + uint32_t DINC : 2; + uint32_t SINC : 2; + uint32_t DEST_MSIZE : 3; + uint32_t SRC_MSIZE : 3; + uint32_t SRC_GATHER_EN: 1; + uint32_t DST_SCATTER_EN: 1; uint32_t : 1; - uint32_t TT_FC : 3; - uint32_t DMS : 2; - uint32_t SMS : 2; - uint32_t LLP_DST_EN : 1; - uint32_t LLP_SRC_EN : 1; - } CTL_LOW_b; + uint32_t TT_FC : 3; + uint32_t DMS : 2; + uint32_t SMS : 2; + uint32_t LLP_DST_EN : 1; + uint32_t LLP_SRC_EN : 1; + } CTL_LOW_b; } INNER; } INNER_CTL_LOW; typedef struct { union { - uint32_t CTL_HI; - + uint32_t CTL_HI; + struct { - uint32_t BLOCK_TS : 12; - uint32_t DONE : 1; - } CTL_HI_b; + uint32_t BLOCK_TS : 12; + uint32_t DONE : 1; + } CTL_HI_b; } INNER; } INNER_CTL_HIGH; -typedef struct { - uint32_t srcAddr; - uint32_t dstAddr; - uint32_t nextBlock; - INNER_CTL_LOW low; - INNER_CTL_HIGH high; +typedef struct { + uint32_t srcAddr; + uint32_t dstAddr; + uint32_t nextBlock; + INNER_CTL_LOW low; + INNER_CTL_HIGH high; } INNER_BLOCK_DESC; @@ -87,176 +87,176 @@ typedef struct { #define DMA_LOCK_DMA_BLOCK_TRANSFER 1 #define DMA_LOCK_DMA_BLOCK_TRANSACTION 2 - + void DMA_Init() { - DMA->DMA_EN_b.EN = TRUE; - - // only open channel 0 - DMA->CH_EN = (0xFF << DMA_MAX_CHANNEL_NUM) | 0x0; - - DMA_ClearInt(DMA_Int_All); - DMA_EnableInt(DMA_Int_All, FALSE); - - DMA->SAR0 = 0x0; - DMA->DAR0 = 0x0; - - DMA->CTL_HI0_b.BLOCK_TS = 0; - DMA->CTL_LOW0_b.INT_EN = FALSE; - DMA->CTL_LOW0_b.DST_TR_WIDTH = DMA_TR_WIDTH_32_BIT; - DMA->CTL_LOW0_b.SRC_TR_WIDTH = DMA_TR_WIDTH_32_BIT; - DMA->CTL_LOW0_b.DINC = DMA_INC_INCREMENT; - DMA->CTL_LOW0_b.SINC = DMA_INC_INCREMENT; - DMA->CTL_LOW0_b.DEST_MSIZE = 0; - DMA->CTL_LOW0_b.SRC_MSIZE = 0; - DMA->CTL_LOW0_b.SRC_GATHER_EN = FALSE; - DMA->CTL_LOW0_b.DST_SCATTER_EN = FALSE; - DMA->CTL_LOW0_b.TT_FC = 0; - DMA->CTL_LOW0_b.DMS = 0; - DMA->CTL_LOW0_b.SMS = 0; - DMA->CTL_LOW0_b.LLP_DST_EN = FALSE; - DMA->CTL_LOW0_b.LLP_SRC_EN = FALSE; - - DMA->LLP0_b.LOC = 0; - DMA->LLP0_b.LMS = 0; + DMA->DMA_EN_b.EN = TRUE; + + // only open channel 0 + DMA->CH_EN = (0xFF << DMA_MAX_CHANNEL_NUM) | 0x0; + + DMA_ClearInt(DMA_Int_All); + DMA_EnableInt(DMA_Int_All, FALSE); + + DMA->SAR0 = 0x0; + DMA->DAR0 = 0x0; + + DMA->CTL_HI0_b.BLOCK_TS = 0; + DMA->CTL_LOW0_b.INT_EN = FALSE; + DMA->CTL_LOW0_b.DST_TR_WIDTH = DMA_TR_WIDTH_32_BIT; + DMA->CTL_LOW0_b.SRC_TR_WIDTH = DMA_TR_WIDTH_32_BIT; + DMA->CTL_LOW0_b.DINC = DMA_INC_INCREMENT; + DMA->CTL_LOW0_b.SINC = DMA_INC_INCREMENT; + DMA->CTL_LOW0_b.DEST_MSIZE = 0; + DMA->CTL_LOW0_b.SRC_MSIZE = 0; + DMA->CTL_LOW0_b.SRC_GATHER_EN = FALSE; + DMA->CTL_LOW0_b.DST_SCATTER_EN = FALSE; + DMA->CTL_LOW0_b.TT_FC = 0; + DMA->CTL_LOW0_b.DMS = 0; + DMA->CTL_LOW0_b.SMS = 0; + DMA->CTL_LOW0_b.LLP_DST_EN = FALSE; + DMA->CTL_LOW0_b.LLP_SRC_EN = FALSE; + + DMA->LLP0_b.LOC = 0; + DMA->LLP0_b.LMS = 0; DMA->SGR0_b.SGC = 0x1; - DMA->SGR0_b.SGI = 0x0; - - DMA->DSR0_b.DSC = 0x0; - DMA->DSR0_b.DSI = 0x0; + DMA->SGR0_b.SGI = 0x0; + + DMA->DSR0_b.DSC = 0x0; + DMA->DSR0_b.DSI = 0x0; DMA->SSTATAR0 = 0x0; - DMA->DSTATAR0 = 0x0; - - DMA->CFG_HI0 = 0x0; - DMA->CFG_LOW0_b.CH_PRIOR = 0; - DMA->CFG_LOW0_b.CH_SUSP = 0; - DMA->CFG_LOW0_b.HS_SEL_DST = 0; - DMA->CFG_LOW0_b.LOCK_B_L = 0; - DMA->CFG_LOW0_b.HS_SEL_SRC = 0; - DMA->CFG_LOW0_b.LOCK_CH_L = DMA_LOCK_DMA_TRANSFER; - DMA->CFG_LOW0_b.LOCK_B_L = DMA_LOCK_DMA_TRANSFER; - DMA->CFG_LOW0_b.LOCK_CH = TRUE; - DMA->CFG_LOW0_b.LOCK_B = TRUE; - DMA->CFG_LOW0_b.DST_HS_POL = 0; - DMA->CFG_LOW0_b.SRC_HS_POL = 0; - DMA->CFG_LOW0_b.RELOAD_SRC = FALSE; - DMA->CFG_LOW0_b.RELOAD_DST = FALSE; + DMA->DSTATAR0 = 0x0; + + DMA->CFG_HI0 = 0x0; + DMA->CFG_LOW0_b.CH_PRIOR = 0; + DMA->CFG_LOW0_b.CH_SUSP = 0; + DMA->CFG_LOW0_b.HS_SEL_DST = 0; + DMA->CFG_LOW0_b.LOCK_B_L = 0; + DMA->CFG_LOW0_b.HS_SEL_SRC = 0; + DMA->CFG_LOW0_b.LOCK_CH_L = DMA_LOCK_DMA_TRANSFER; + DMA->CFG_LOW0_b.LOCK_B_L = DMA_LOCK_DMA_TRANSFER; + DMA->CFG_LOW0_b.LOCK_CH = TRUE; + DMA->CFG_LOW0_b.LOCK_B = TRUE; + DMA->CFG_LOW0_b.DST_HS_POL = 0; + DMA->CFG_LOW0_b.SRC_HS_POL = 0; + DMA->CFG_LOW0_b.RELOAD_SRC = FALSE; + DMA->CFG_LOW0_b.RELOAD_DST = FALSE; } void DMA_EnableInt(uint32_t Int, BOOL enable) { - assert_param(IS_DMA_INT(Int)); - + assert_param(IS_DMA_INT(Int)); + if (enable) { - if (Int & DMA_Int_TfrComplete) { - DMA->INT_EN_TFR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; - } - - if (Int & DMA_Int_Err) { - DMA->INT_EN_ERR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; - } - } else { - if (Int & DMA_Int_TfrComplete) { - DMA->INT_EN_TFR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x0; - } - - if (Int & DMA_Int_Err) { - DMA->INT_EN_ERR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x0; - } - } + if (Int & DMA_Int_TfrComplete) { + DMA->INT_EN_TFR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; + } + + if (Int & DMA_Int_Err) { + DMA->INT_EN_ERR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; + } + } else { + if (Int & DMA_Int_TfrComplete) { + DMA->INT_EN_TFR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x0; + } + + if (Int & DMA_Int_Err) { + DMA->INT_EN_ERR = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x0; + } + } } BOOL DMA_GetIntStatus(uint32_t Int) { - assert_param(IS_DMA_INT(Int)); - - if (Int & DMA_Int_TfrComplete) { - if (DMA->INT_TFR) { - return TRUE; - } - } - - if (Int & DMA_Int_Err) { - if (DMA->INT_ERR) { - return TRUE; - } - } - - return FALSE; + assert_param(IS_DMA_INT(Int)); + + if (Int & DMA_Int_TfrComplete) { + if (DMA->INT_TFR) { + return TRUE; + } + } + + if (Int & DMA_Int_Err) { + if (DMA->INT_ERR) { + return TRUE; + } + } + + return FALSE; } void DMA_ClearInt(uint32_t Int) { - assert_param(IS_DMA_INT(Int)); - - if (Int & DMA_Int_TfrComplete) { - DMA->INT_CLEAR_TFR = 0x1; - } - - if (Int & DMA_Int_Err) { - DMA->INT_CLEAR_ERR = 0x1; - } + assert_param(IS_DMA_INT(Int)); + + if (Int & DMA_Int_TfrComplete) { + DMA->INT_CLEAR_TFR = 0x1; + } + + if (Int & DMA_Int_Err) { + DMA->INT_CLEAR_ERR = 0x1; + } } BOOL DMA_IsBusy() { - return (DMA->CH_EN_b.EN) ? TRUE : FALSE; + return (DMA->CH_EN_b.EN) ? TRUE : FALSE; } BOOL DMA_Transfer(BLOCK_DESC *blockList) { - BLOCK_DESC *p; - if (!blockList) { - return FALSE; - } - - if (DMA_IsBusy()) { - return FALSE; - } - - p = blockList; - while (p) { - BOOL llp = FALSE; - INNER_BLOCK_DESC *inner = (INNER_BLOCK_DESC *)p; - if (p->nextBlock) { - llp = TRUE; - } - - inner->high.INNER.CTL_HI = 0; - inner->high.INNER.CTL_HI_b.BLOCK_TS = (p->number >> DMA_TR_WIDTH_32_BIT); - inner->high.INNER.CTL_HI_b.DONE = 0; - - inner->nextBlock = p->nextBlock; - - inner->low.INNER.CTL_LOW = 0; - inner->low.INNER.CTL_LOW_b.INT_EN = TRUE; - inner->low.INNER.CTL_LOW_b.DST_TR_WIDTH = DMA_TR_WIDTH_32_BIT; - inner->low.INNER.CTL_LOW_b.SRC_TR_WIDTH = DMA_TR_WIDTH_32_BIT; - inner->low.INNER.CTL_LOW_b.DINC = DMA_INC_INCREMENT; - inner->low.INNER.CTL_LOW_b.SINC = DMA_INC_INCREMENT; - inner->low.INNER.CTL_LOW_b.DEST_MSIZE = 0; - inner->low.INNER.CTL_LOW_b.SRC_MSIZE = 0; - inner->low.INNER.CTL_LOW_b.SRC_GATHER_EN = FALSE; - inner->low.INNER.CTL_LOW_b.DST_SCATTER_EN = FALSE; - inner->low.INNER.CTL_LOW_b.TT_FC = 0; - inner->low.INNER.CTL_LOW_b.DMS = 0; - inner->low.INNER.CTL_LOW_b.SMS = 0; - inner->low.INNER.CTL_LOW_b.LLP_DST_EN = llp; - inner->low.INNER.CTL_LOW_b.LLP_SRC_EN = llp; - - if ((uint32_t)inner == (uint32_t)blockList) { - // copy to DMA - DMA->SAR0 = llp ? 0x0 : inner->srcAddr ; - DMA->DAR0 = llp ? 0x0 : inner->dstAddr ; - - DMA->CTL_HI0 = llp ? 0x0 : inner->high.INNER.CTL_HI; - DMA->CTL_LOW0 = inner->low.INNER.CTL_LOW; - - DMA->LLP0 = llp ? (uint32_t)inner : 0x0; - } - - p = (BLOCK_DESC *)inner->nextBlock; - } + BLOCK_DESC *p; + if (!blockList) { + return FALSE; + } + + if (DMA_IsBusy()) { + return FALSE; + } + + p = blockList; + while (p) { + BOOL llp = FALSE; + INNER_BLOCK_DESC *inner = (INNER_BLOCK_DESC *)p; + if (p->nextBlock) { + llp = TRUE; + } + + inner->high.INNER.CTL_HI = 0; + inner->high.INNER.CTL_HI_b.BLOCK_TS = (p->number >> DMA_TR_WIDTH_32_BIT); + inner->high.INNER.CTL_HI_b.DONE = 0; + + inner->nextBlock = p->nextBlock; + + inner->low.INNER.CTL_LOW = 0; + inner->low.INNER.CTL_LOW_b.INT_EN = TRUE; + inner->low.INNER.CTL_LOW_b.DST_TR_WIDTH = DMA_TR_WIDTH_32_BIT; + inner->low.INNER.CTL_LOW_b.SRC_TR_WIDTH = DMA_TR_WIDTH_32_BIT; + inner->low.INNER.CTL_LOW_b.DINC = DMA_INC_INCREMENT; + inner->low.INNER.CTL_LOW_b.SINC = DMA_INC_INCREMENT; + inner->low.INNER.CTL_LOW_b.DEST_MSIZE = 0; + inner->low.INNER.CTL_LOW_b.SRC_MSIZE = 0; + inner->low.INNER.CTL_LOW_b.SRC_GATHER_EN = FALSE; + inner->low.INNER.CTL_LOW_b.DST_SCATTER_EN = FALSE; + inner->low.INNER.CTL_LOW_b.TT_FC = 0; + inner->low.INNER.CTL_LOW_b.DMS = 0; + inner->low.INNER.CTL_LOW_b.SMS = 0; + inner->low.INNER.CTL_LOW_b.LLP_DST_EN = llp; + inner->low.INNER.CTL_LOW_b.LLP_SRC_EN = llp; + + if ((uint32_t)inner == (uint32_t)blockList) { + // copy to DMA + DMA->SAR0 = llp ? 0x0 : inner->srcAddr ; + DMA->DAR0 = llp ? 0x0 : inner->dstAddr ; + + DMA->CTL_HI0 = llp ? 0x0 : inner->high.INNER.CTL_HI; + DMA->CTL_LOW0 = inner->low.INNER.CTL_LOW; + + DMA->LLP0 = llp ? (uint32_t)inner : 0x0; + } + + p = (BLOCK_DESC *)inner->nextBlock; + } + + // open channel 0 + DMA->CH_EN = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; - // open channel 0 - DMA->CH_EN = (0x1 << DMA_MAX_CHANNEL_NUM) | 0x1; - - return TRUE; + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_efuse.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_efuse.c index ad84a40fe9..fe8333fe94 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_efuse.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_efuse.c @@ -1,255 +1,255 @@ /** - ***************************************************************************** - * @file cmem7_efuse.c - * - * @brief CMEM7 EFUSE source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_efuse.c + * + * @brief CMEM7 EFUSE source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_efuse.h" static void efuse_SetClock(uint8_t dividor) { - if (dividor <= 2) { - GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 0; - } else if (dividor <= 4) { - GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 1; - } else if (dividor <= 8) { - GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 2; - } else { - GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 3; - } + if (dividor <= 2) { + GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 0; + } else if (dividor <= 4) { + GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 1; + } else if (dividor <= 8) { + GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 2; + } else { + GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK = 3; + } } static uint32_t efuse_GetClock() { - return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK + 1)); + return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_1_b.EFUSE_CLK + 1)); } // static uint8_t efuse_Crc8Bit(uint8_t data, uint8_t crc) { -// uint8_t newCrc; -// uint8_t d[8], c[8], i; -// -// for (i = 0; i < 8; i++) { -// d[i] = (data >> i) & 0x01; -// c[i] = (crc >> i) & 0x01; -// } -// -// newCrc = d[7] ^ d[6] ^ d[0] ^ c[0] ^ c[6] ^ c[7]; -// newCrc |= (d[6] ^ d[1] ^ d[0] ^ c[0] ^ c[1] ^ c[6]) << 1; -// newCrc |= (d[6] ^ d[2] ^ d[1] ^ d[0] ^ c[0] ^ c[1] ^ c[2] ^ c[6]) << 2; -// newCrc |= (d[7] ^ d[3] ^ d[2] ^ d[1] ^ c[1] ^ c[2] ^ c[3] ^ c[7]) << 3; -// newCrc |= (d[4] ^ d[3] ^ d[2] ^ c[2] ^ c[3] ^ c[4]) << 4; -// newCrc |= (d[5] ^ d[4] ^ d[3] ^ c[3] ^ c[4] ^ c[5]) << 5; -// newCrc |= (d[6] ^ d[5] ^ d[4] ^ c[4] ^ c[5] ^ c[6]) << 6; -// newCrc |= (d[7] ^ d[6] ^ d[5] ^ c[5] ^ c[6] ^ c[7]) << 1; -// -// return newCrc; +// uint8_t newCrc; +// uint8_t d[8], c[8], i; +// +// for (i = 0; i < 8; i++) { +// d[i] = (data >> i) & 0x01; +// c[i] = (crc >> i) & 0x01; +// } +// +// newCrc = d[7] ^ d[6] ^ d[0] ^ c[0] ^ c[6] ^ c[7]; +// newCrc |= (d[6] ^ d[1] ^ d[0] ^ c[0] ^ c[1] ^ c[6]) << 1; +// newCrc |= (d[6] ^ d[2] ^ d[1] ^ d[0] ^ c[0] ^ c[1] ^ c[2] ^ c[6]) << 2; +// newCrc |= (d[7] ^ d[3] ^ d[2] ^ d[1] ^ c[1] ^ c[2] ^ c[3] ^ c[7]) << 3; +// newCrc |= (d[4] ^ d[3] ^ d[2] ^ c[2] ^ c[3] ^ c[4]) << 4; +// newCrc |= (d[5] ^ d[4] ^ d[3] ^ c[3] ^ c[4] ^ c[5]) << 5; +// newCrc |= (d[6] ^ d[5] ^ d[4] ^ c[4] ^ c[5] ^ c[6]) << 6; +// newCrc |= (d[7] ^ d[6] ^ d[5] ^ c[5] ^ c[6] ^ c[7]) << 1; +// +// return newCrc; // } // static uint8_t efuse_Crc(EFUSE_AesKey* key, uint8_t lock, BOOL isLowRegion) { -// uint8_t crc = 0; -// -// if (isLowRegion) { -// crc = efuse_Crc8Bit(key->key0, crc); -// crc = efuse_Crc8Bit(key->key0 >> 8, crc); -// crc = efuse_Crc8Bit(key->key0 >> 16, crc); -// crc = efuse_Crc8Bit(key->key0 >> 24, crc); -// crc = efuse_Crc8Bit(key->key1, crc); -// crc = efuse_Crc8Bit(key->key1 >> 8, crc); -// crc = efuse_Crc8Bit(key->key1 >> 16, crc); -// crc = efuse_Crc8Bit(key->key1 >> 24, crc); -// crc = efuse_Crc8Bit(key->key2, crc); -// crc = efuse_Crc8Bit(key->key2 >> 8, crc); -// crc = efuse_Crc8Bit(key->key2 >> 16, crc); -// crc = efuse_Crc8Bit(key->key2 >> 24, crc); -// crc = efuse_Crc8Bit(key->key3, crc); -// crc = efuse_Crc8Bit(key->key3 >> 8, crc); -// crc = efuse_Crc8Bit(key->key3 >> 16, crc); -// crc = efuse_Crc8Bit(key->key3 >> 24, crc); -// crc = efuse_Crc8Bit(lock, crc); -// crc = efuse_Crc8Bit(0x0, crc); -// crc = efuse_Crc8Bit(0x0, crc); -// } else { -// crc = efuse_Crc8Bit(key->key4, crc); -// crc = efuse_Crc8Bit(key->key4 >> 8, crc); -// crc = efuse_Crc8Bit(key->key4 >> 16, crc); -// crc = efuse_Crc8Bit(key->key4 >> 24, crc); -// crc = efuse_Crc8Bit(key->key5, crc); -// crc = efuse_Crc8Bit(key->key5 >> 8, crc); -// crc = efuse_Crc8Bit(key->key5 >> 16, crc); -// crc = efuse_Crc8Bit(key->key5 >> 24, crc); -// crc = efuse_Crc8Bit(key->key6, crc); -// crc = efuse_Crc8Bit(key->key6 >> 8, crc); -// crc = efuse_Crc8Bit(key->key6 >> 16, crc); -// crc = efuse_Crc8Bit(key->key6 >> 24, crc); -// crc = efuse_Crc8Bit(key->key7, crc); -// crc = efuse_Crc8Bit(key->key7 >> 8, crc); -// crc = efuse_Crc8Bit(key->key7 >> 16, crc); -// crc = efuse_Crc8Bit(key->key7 >> 24, crc); -// crc = efuse_Crc8Bit(lock, crc); -// crc = efuse_Crc8Bit(0x0, crc); -// crc = efuse_Crc8Bit(0x0, crc); -// } -// -// return crc; +// uint8_t crc = 0; +// +// if (isLowRegion) { +// crc = efuse_Crc8Bit(key->key0, crc); +// crc = efuse_Crc8Bit(key->key0 >> 8, crc); +// crc = efuse_Crc8Bit(key->key0 >> 16, crc); +// crc = efuse_Crc8Bit(key->key0 >> 24, crc); +// crc = efuse_Crc8Bit(key->key1, crc); +// crc = efuse_Crc8Bit(key->key1 >> 8, crc); +// crc = efuse_Crc8Bit(key->key1 >> 16, crc); +// crc = efuse_Crc8Bit(key->key1 >> 24, crc); +// crc = efuse_Crc8Bit(key->key2, crc); +// crc = efuse_Crc8Bit(key->key2 >> 8, crc); +// crc = efuse_Crc8Bit(key->key2 >> 16, crc); +// crc = efuse_Crc8Bit(key->key2 >> 24, crc); +// crc = efuse_Crc8Bit(key->key3, crc); +// crc = efuse_Crc8Bit(key->key3 >> 8, crc); +// crc = efuse_Crc8Bit(key->key3 >> 16, crc); +// crc = efuse_Crc8Bit(key->key3 >> 24, crc); +// crc = efuse_Crc8Bit(lock, crc); +// crc = efuse_Crc8Bit(0x0, crc); +// crc = efuse_Crc8Bit(0x0, crc); +// } else { +// crc = efuse_Crc8Bit(key->key4, crc); +// crc = efuse_Crc8Bit(key->key4 >> 8, crc); +// crc = efuse_Crc8Bit(key->key4 >> 16, crc); +// crc = efuse_Crc8Bit(key->key4 >> 24, crc); +// crc = efuse_Crc8Bit(key->key5, crc); +// crc = efuse_Crc8Bit(key->key5 >> 8, crc); +// crc = efuse_Crc8Bit(key->key5 >> 16, crc); +// crc = efuse_Crc8Bit(key->key5 >> 24, crc); +// crc = efuse_Crc8Bit(key->key6, crc); +// crc = efuse_Crc8Bit(key->key6 >> 8, crc); +// crc = efuse_Crc8Bit(key->key6 >> 16, crc); +// crc = efuse_Crc8Bit(key->key6 >> 24, crc); +// crc = efuse_Crc8Bit(key->key7, crc); +// crc = efuse_Crc8Bit(key->key7 >> 8, crc); +// crc = efuse_Crc8Bit(key->key7 >> 16, crc); +// crc = efuse_Crc8Bit(key->key7 >> 24, crc); +// crc = efuse_Crc8Bit(lock, crc); +// crc = efuse_Crc8Bit(0x0, crc); +// crc = efuse_Crc8Bit(0x0, crc); +// } +// +// return crc; // } void EFUSE_Init(EFUSE_InitTypeDef* init) { - assert_param(init); - assert_param(IS_EFUSE_TMRF(init->EFUSE_TMRF)); - - efuse_SetClock(init->EFUSE_ClockDividor); - EFUSE->USER_CTRL_LOW_b.TMRF = init->EFUSE_TMRF; - EFUSE->USER_CTRL_HI_b.TMRF = init->EFUSE_TMRF; - if (init->timing) { - uint32_t value; - - value = (init->timing->EFUSE_Tpwph * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TPWPH = value >> 2; - EFUSE->TIMING_1_b.TPWPH = value & 0x00000003; + assert_param(init); + assert_param(IS_EFUSE_TMRF(init->EFUSE_TMRF)); + + efuse_SetClock(init->EFUSE_ClockDividor); + EFUSE->USER_CTRL_LOW_b.TMRF = init->EFUSE_TMRF; + EFUSE->USER_CTRL_HI_b.TMRF = init->EFUSE_TMRF; + if (init->timing) { + uint32_t value; + + value = (init->timing->EFUSE_Tpwph * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TPWPH = value >> 2; + EFUSE->TIMING_1_b.TPWPH = value & 0x00000003; + + value = (init->timing->EFUSE_Trac * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TRAC = value; - value = (init->timing->EFUSE_Trac * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TRAC = value; + value = (init->timing->EFUSE_Trah * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TRAH = value; - value = (init->timing->EFUSE_Trah * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TRAH = value; - - value = (init->timing->EFUSE_Trpw * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TRPW = value; + value = (init->timing->EFUSE_Trpw * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TRPW = value; - value = (init->timing->EFUSE_Trc * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TRC = value; - - value = (init->timing->EFUSE_Tesr * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TESR = value; + value = (init->timing->EFUSE_Trc * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TRC = value; - value = (init->timing->EFUSE_Tprs * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_0_b.TPRS = value; + value = (init->timing->EFUSE_Tesr * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TESR = value; - value = (init->timing->EFUSE_Tpi * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_1_b.TPIT = value; + value = (init->timing->EFUSE_Tprs * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_0_b.TPRS = value; - value = (init->timing->EFUSE_Tpp * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_1_b.TPP = value; + value = (init->timing->EFUSE_Tpi * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_1_b.TPIT = value; - value = (init->timing->EFUSE_Teps * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_1_b.TEPS = value; + value = (init->timing->EFUSE_Tpp * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_1_b.TPP = value; - value = (init->timing->EFUSE_Teps * (efuse_GetClock() / 1000000) / 1000); - value = (value == 0) ? 1 : value; - EFUSE->TIMING_1_b.TPWPS = value; - } + value = (init->timing->EFUSE_Teps * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_1_b.TEPS = value; + + value = (init->timing->EFUSE_Teps * (efuse_GetClock() / 1000000) / 1000); + value = (value == 0) ? 1 : value; + EFUSE->TIMING_1_b.TPWPS = value; + } } /* It only can be written once */ // BOOL EFUSE_Write(EFUSE_AesKey* key) { -// assert_param(key); -// -// if ((EFUSE->USER_CTRL_LOW_b.LOCK || EFUSE->USER_CTRL_LOW_b.BUSY) || -// (EFUSE->USER_CTRL_HI_b.LOCK || EFUSE->USER_CTRL_HI_b.BUSY)) { -// return FALSE; -// } -// -// // write low region -// EFUSE->USER_DATA0_LOW = key->key0; -// EFUSE->USER_DATA1_LOW = key->key1; -// EFUSE->USER_DATA2_LOW = key->key2; -// EFUSE->USER_DATA3_LOW = key->key3; -// EFUSE->USER_DATA4_LOW_b.CRC = efuse_Crc(key, 0x1, TRUE); -// EFUSE->USER_DATA4_LOW_b.LOCK = 1; -// EFUSE->USER_CTRL_LOW_b.WR_EN = FALSE; -// EFUSE->USER_CTRL_LOW_b.WR_EN = TRUE; -// -// udelay(1000); -// while (EFUSE->USER_CTRL_LOW_b.BUSY) ; -// -// if (EFUSE->USER_CTRL_LOW_b.WR_CRC_ERR) { -// return FALSE; -// } -// -// // write high region -// EFUSE->USER_DATA0_HI = key->key4; -// EFUSE->USER_DATA1_HI = key->key5; -// EFUSE->USER_DATA2_HI = key->key6; -// EFUSE->USER_DATA3_HI = key->key7; -// EFUSE->USER_DATA4_HI_b.CRC = efuse_Crc(key, 0x1, FALSE); -// EFUSE->USER_DATA4_HI_b.LOCK = 1; -// EFUSE->USER_CTRL_HI_b.WR_EN = FALSE; -// EFUSE->USER_CTRL_HI_b.WR_EN = TRUE; -// -// udelay(1000); -// while (EFUSE->USER_CTRL_HI_b.BUSY) ; -// -// if (EFUSE->USER_CTRL_HI_b.WR_CRC_ERR) { -// return FALSE; -// } -// return TRUE; +// assert_param(key); +// +// if ((EFUSE->USER_CTRL_LOW_b.LOCK || EFUSE->USER_CTRL_LOW_b.BUSY) || +// (EFUSE->USER_CTRL_HI_b.LOCK || EFUSE->USER_CTRL_HI_b.BUSY)) { +// return FALSE; +// } +// +// // write low region +// EFUSE->USER_DATA0_LOW = key->key0; +// EFUSE->USER_DATA1_LOW = key->key1; +// EFUSE->USER_DATA2_LOW = key->key2; +// EFUSE->USER_DATA3_LOW = key->key3; +// EFUSE->USER_DATA4_LOW_b.CRC = efuse_Crc(key, 0x1, TRUE); +// EFUSE->USER_DATA4_LOW_b.LOCK = 1; +// EFUSE->USER_CTRL_LOW_b.WR_EN = FALSE; +// EFUSE->USER_CTRL_LOW_b.WR_EN = TRUE; +// +// udelay(1000); +// while (EFUSE->USER_CTRL_LOW_b.BUSY) ; +// +// if (EFUSE->USER_CTRL_LOW_b.WR_CRC_ERR) { +// return FALSE; +// } +// +// // write high region +// EFUSE->USER_DATA0_HI = key->key4; +// EFUSE->USER_DATA1_HI = key->key5; +// EFUSE->USER_DATA2_HI = key->key6; +// EFUSE->USER_DATA3_HI = key->key7; +// EFUSE->USER_DATA4_HI_b.CRC = efuse_Crc(key, 0x1, FALSE); +// EFUSE->USER_DATA4_HI_b.LOCK = 1; +// EFUSE->USER_CTRL_HI_b.WR_EN = FALSE; +// EFUSE->USER_CTRL_HI_b.WR_EN = TRUE; +// +// udelay(1000); +// while (EFUSE->USER_CTRL_HI_b.BUSY) ; +// +// if (EFUSE->USER_CTRL_HI_b.WR_CRC_ERR) { +// return FALSE; +// } +// return TRUE; // } BOOL EFUSE_Compare(EFUSE_AesKey* key) { - assert_param(key); - - if (EFUSE->USER_CTRL_LOW_b.BUSY || EFUSE->USER_CTRL_HI_b.BUSY) { - return FALSE; - } - - // compare low region - EFUSE->USER_DATA0_LOW = key->key0; - EFUSE->USER_DATA1_LOW = key->key1; - EFUSE->USER_DATA2_LOW = key->key2; - EFUSE->USER_DATA3_LOW = key->key3; - EFUSE->USER_CTRL_LOW_b.RD_EN = FALSE; - EFUSE->USER_CTRL_LOW_b.RD_EN = TRUE; - - udelay(2); - while (EFUSE->USER_CTRL_LOW_b.BUSY) ; - - if (EFUSE->USER_CTRL_LOW_b.COMPARE_FAIL) { - return FALSE; - } - - // compare high region - EFUSE->USER_DATA0_HI = key->key4; - EFUSE->USER_DATA1_HI = key->key5; - EFUSE->USER_DATA2_HI = key->key6; - EFUSE->USER_DATA3_HI = key->key7; - EFUSE->USER_CTRL_HI_b.RD_EN = FALSE; - EFUSE->USER_CTRL_HI_b.RD_EN = TRUE; - - udelay(2); - while (EFUSE->USER_CTRL_HI_b.BUSY) ; - - if (EFUSE->USER_CTRL_HI_b.COMPARE_FAIL) { - return FALSE; - } - - return TRUE; + assert_param(key); + + if (EFUSE->USER_CTRL_LOW_b.BUSY || EFUSE->USER_CTRL_HI_b.BUSY) { + return FALSE; + } + + // compare low region + EFUSE->USER_DATA0_LOW = key->key0; + EFUSE->USER_DATA1_LOW = key->key1; + EFUSE->USER_DATA2_LOW = key->key2; + EFUSE->USER_DATA3_LOW = key->key3; + EFUSE->USER_CTRL_LOW_b.RD_EN = FALSE; + EFUSE->USER_CTRL_LOW_b.RD_EN = TRUE; + + udelay(2); + while (EFUSE->USER_CTRL_LOW_b.BUSY) ; + + if (EFUSE->USER_CTRL_LOW_b.COMPARE_FAIL) { + return FALSE; + } + + // compare high region + EFUSE->USER_DATA0_HI = key->key4; + EFUSE->USER_DATA1_HI = key->key5; + EFUSE->USER_DATA2_HI = key->key6; + EFUSE->USER_DATA3_HI = key->key7; + EFUSE->USER_CTRL_HI_b.RD_EN = FALSE; + EFUSE->USER_CTRL_HI_b.RD_EN = TRUE; + + udelay(2); + while (EFUSE->USER_CTRL_HI_b.BUSY) ; + + if (EFUSE->USER_CTRL_HI_b.COMPARE_FAIL) { + return FALSE; + } + + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_eth.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_eth.c index 5c07abebf9..7468561f5f 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_eth.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_eth.c @@ -1,115 +1,115 @@ /** - ***************************************************************************** - * @file cmem7_eth.c - * - * @brief CMEM7 ethernet source file - * - * - * @version V2.0 - * @date 3. September 2014 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_eth.c + * + * @brief CMEM7 ethernet source file + * + * + * @version V2.0 + * @date 3. September 2014 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_eth.h" #include "cmem7_misc.h" -typedef struct { - union { +typedef struct { + union { uint32_t TX0; - - struct { - uint32_t : 1; - uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */ - uint32_t : 1; - uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */ - uint32_t : 1; - uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */ - uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */ - uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */ - uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */ - uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */ - uint32_t : 2; - uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */ - uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */ - uint32_t : 3; - uint32_t TCH : 1; /*!< Second Address Chained */ - uint32_t : 4; - uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */ - uint32_t : 2; - uint32_t FS : 1; /*!< first segment flag */ - uint32_t LS : 1; /*!< last segment flag */ - uint32_t IC : 1; /*!< Interrupt on Completion */ - uint32_t OWN : 1; /*!< Descriptor is owned by self or hardware */ - } TX0_b; - } TX_0; - - union { + + struct { + uint32_t : 1; + uint32_t UNDERFLOW_ERR : 1; /*!< [OUT] Underflow error */ + uint32_t : 1; + uint32_t COLLISION_CNT : 4; /*!< [OUT] Collision count */ + uint32_t : 1; + uint32_t EX_COLLISION : 1; /*!< [OUT] Excessive collision error */ + uint32_t LATE_COLLISION : 1; /*!< [OUT] Late collision error */ + uint32_t NO_CARRIER : 1; /*!< [OUT] No carrier error */ + uint32_t LOSS_CARRIER : 1; /*!< [OUT] loss of carrier error */ + uint32_t PAYLOAD_ERR : 1; /*!< [OUT] IP payload error */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary */ + uint32_t HEADER_ERR : 1; /*!< [OUT] IP header error */ + uint32_t : 3; + uint32_t TCH : 1; /*!< Second Address Chained */ + uint32_t : 4; + uint32_t TTSE : 1; /*!< enables IEEE1588 hardware timestamping in first segment */ + uint32_t : 2; + uint32_t FS : 1; /*!< first segment flag */ + uint32_t LS : 1; /*!< last segment flag */ + uint32_t IC : 1; /*!< Interrupt on Completion */ + uint32_t OWN : 1; /*!< Descriptor is owned by self or hardware */ + } TX0_b; + } TX_0; + + union { uint32_t TX1; - - struct { - uint32_t SIZE : 13; /*!< buffer size */ - uint32_t : 19; - } TX1_b; - } TX_1; - - uint32_t bufAddr; - uint32_t nextDescAddr; + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 19; + } TX1_b; + } TX_1; + + uint32_t bufAddr; + uint32_t nextDescAddr; uint64_t reserved; - uint64_t timeStamp; /*!< time stamp in the last segment */ + uint64_t timeStamp; /*!< time stamp in the last segment */ } INNER_ETH_TX_DESC; -typedef struct { - union { +typedef struct { + union { uint32_t RX0; - - struct { - uint32_t : 1; - uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */ - uint32_t : 5; - uint32_t TTSE : 1; /*!< timestamp available while last segment */ - uint32_t LS : 1; /*!< last segment flag */ - uint32_t FS : 1; /*!< first segment flag */ - uint32_t : 1; - uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */ - uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */ - uint32_t : 2; - uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */ - uint32_t FL : 14; /*!< frame length while last segment */ - uint32_t : 1; - uint32_t OWN : 1; /*!< Descriptor is owned by self or hardware */ - } RX0_b; - } RX_0; - - union { + + struct { + uint32_t : 1; + uint32_t CRC_ERR : 1; /*!< [OUT] CRC error while last segment */ + uint32_t : 5; + uint32_t TTSE : 1; /*!< timestamp available while last segment */ + uint32_t LS : 1; /*!< last segment flag */ + uint32_t FS : 1; /*!< first segment flag */ + uint32_t : 1; + uint32_t OVERFLOW_ERR : 1; /*!< [OUT] FIFO overflow while last segment */ + uint32_t LENGTH_ERR : 1; /*!< [OUT] length error while last segment */ + uint32_t : 2; + uint32_t ERR_SUM : 1; /*!< [OUT] Error summary while last segment */ + uint32_t FL : 14; /*!< frame length while last segment */ + uint32_t : 1; + uint32_t OWN : 1; /*!< Descriptor is owned by self or hardware */ + } RX0_b; + } RX_0; + + union { uint32_t RX1; - - struct { - uint32_t SIZE : 13; /*!< buffer size */ - uint32_t : 1; - uint32_t RCH : 1; /*!< Second Address Chained */ - uint32_t : 16; - uint32_t DIC : 1; /*!< Disable interrupt on Completion */ - } RX1_b; - } RX_1; - - uint32_t bufAddr; - uint32_t nextDescAddr; + + struct { + uint32_t SIZE : 13; /*!< buffer size */ + uint32_t : 1; + uint32_t RCH : 1; /*!< Second Address Chained */ + uint32_t : 16; + uint32_t DIC : 1; /*!< Disable interrupt on Completion */ + } RX1_b; + } RX_1; + + uint32_t bufAddr; + uint32_t nextDescAddr; uint64_t reserved; - uint64_t timeStamp; /*!< time stamp while the last segment */ + uint64_t timeStamp; /*!< time stamp while the last segment */ } INNER_ETH_RX_DESC; @@ -125,8 +125,8 @@ typedef struct { #define ETH_BURST_LENGTH_8X_SWITCH 32 #define ETH_BURST_LENGTH_8X_MIN 8 -#define ETH_DMA_ARBITRATION_ROUND_ROBIN 0x0 -#define ETH_DMA_ARBITRATION_FIXED_PRIORITY 0x1 +#define ETH_DMA_ARBITRATION_ROUND_ROBIN 0x0 +#define ETH_DMA_ARBITRATION_FIXED_PRIORITY 0x1 #define ETH_RX_THRESHOLD_64 0x0 #define ETH_RX_THRESHOLD_32 0x1 @@ -145,26 +145,26 @@ typedef struct { #define ETH_INT_ABNORMAL_SUMMARY 0x8000 #define ETH_INT_NORMAL_SUMMARY 0x10000 -#define IS_ETH_INT_NORMAL(INT) ((INT & ETH_INT_TX_COMPLETE_FRAME) || \ - (INT & ETH_INT_TX_BUF_UNAVAI) || \ - (INT & ETH_INT_RX_COMPLETE_FRAME)) - -#define IS_ETH_INT_ABNORMAL(INT) ((INT & ETH_INT_TX_STOP) || \ - (INT & ETH_INT_RX_OVERFLOW) || \ - (INT & ETH_INT_TX_UNDERFLOW) || \ - (INT & ETH_INT_RX_BUF_UNAVAI) || \ - (INT & ETH_INT_RX_STOP) || \ - (INT & ETH_INT_BUS_FATAL_ERROR)) - +#define IS_ETH_INT_NORMAL(INT) ((INT & ETH_INT_TX_COMPLETE_FRAME) || \ + (INT & ETH_INT_TX_BUF_UNAVAI) || \ + (INT & ETH_INT_RX_COMPLETE_FRAME)) + +#define IS_ETH_INT_ABNORMAL(INT) ((INT & ETH_INT_TX_STOP) || \ + (INT & ETH_INT_RX_OVERFLOW) || \ + (INT & ETH_INT_TX_UNDERFLOW) || \ + (INT & ETH_INT_RX_BUF_UNAVAI) || \ + (INT & ETH_INT_RX_STOP) || \ + (INT & ETH_INT_BUS_FATAL_ERROR)) + #define ETH_PREAMBLE_7_BYTE 0x0 #define ETH_PREAMBLE_5_BYTE 0x1 #define ETH_PREAMBLE_3_BYTE 0x2 -#define ETH_LINE_SPEED_1000M_BPS 0x0 -#define ETH_LINE_SPEED_10_100M_BPS 0x1 +#define ETH_LINE_SPEED_1000M_BPS 0x0 +#define ETH_LINE_SPEED_10_100M_BPS 0x1 -#define ETH_EXACT_SPEED_10M_BPS 0x0 -#define ETH_EXACT_SPEED_100M_BPS 0x1 +#define ETH_EXACT_SPEED_10M_BPS 0x0 +#define ETH_EXACT_SPEED_100M_BPS 0x1 #define ETH_SOURCE_ADDR_REPLACE 0x3 @@ -175,217 +175,217 @@ typedef struct { static void mac_SwReset(void) { - ETH->BUS_MODE_b.SWR = 1; - while (ETH->BUS_MODE_b.SWR) ; - while (ETH->AHB_STATUS_b.BUSY) ; + ETH->BUS_MODE_b.SWR = 1; + while (ETH->BUS_MODE_b.SWR) ; + while (ETH->AHB_STATUS_b.BUSY) ; } -static void mac_SetConfig(ETH_InitTypeDef *init) { - ETH->CONFIG_b.PRELEN = ETH_PREAMBLE_7_BYTE; - ETH->CONFIG_b.RX_EN = init->ETH_RxEn; - ETH->CONFIG_b.TX_EN = init->ETH_TxEn; - ETH->CONFIG_b.DC_EN = FALSE; - ETH->CONFIG_b.ACS = FALSE; - ETH->CONFIG_b.LUD = init->ETH_LinkUp; - ETH->CONFIG_b.IPC = init->ETH_ChecksumOffload; - ETH->CONFIG_b.DM = init->ETH_Duplex; - ETH->CONFIG_b.LM = FALSE; - ETH->MMCRIMR = 0xFFFFFFFF; - ETH->MMCTIMR = 0xFFFFFFFF; - ETH->MMCIRCOIM = 0xFFFFFFFF; - - if (init->ETH_Speed == ETH_SPEED_10M) { - ETH->CONFIG_b.FES = ETH_EXACT_SPEED_10M_BPS; - ETH->CONFIG_b.PS = ETH_LINE_SPEED_10_100M_BPS; - } else if (init->ETH_Speed == ETH_SPEED_100M) { - ETH->CONFIG_b.FES = ETH_EXACT_SPEED_100M_BPS; - ETH->CONFIG_b.PS = ETH_LINE_SPEED_10_100M_BPS; - } else { - ETH->CONFIG_b.FES = ETH_EXACT_SPEED_100M_BPS; - ETH->CONFIG_b.PS = ETH_LINE_SPEED_1000M_BPS; - } +static void mac_SetConfig(ETH_InitTypeDef *init) { + ETH->CONFIG_b.PRELEN = ETH_PREAMBLE_7_BYTE; + ETH->CONFIG_b.RX_EN = init->ETH_RxEn; + ETH->CONFIG_b.TX_EN = init->ETH_TxEn; + ETH->CONFIG_b.DC_EN = FALSE; + ETH->CONFIG_b.ACS = FALSE; + ETH->CONFIG_b.LUD = init->ETH_LinkUp; + ETH->CONFIG_b.IPC = init->ETH_ChecksumOffload; + ETH->CONFIG_b.DM = init->ETH_Duplex; + ETH->CONFIG_b.LM = FALSE; + ETH->MMCRIMR = 0xFFFFFFFF; + ETH->MMCTIMR = 0xFFFFFFFF; + ETH->MMCIRCOIM = 0xFFFFFFFF; + + if (init->ETH_Speed == ETH_SPEED_10M) { + ETH->CONFIG_b.FES = ETH_EXACT_SPEED_10M_BPS; + ETH->CONFIG_b.PS = ETH_LINE_SPEED_10_100M_BPS; + } else if (init->ETH_Speed == ETH_SPEED_100M) { + ETH->CONFIG_b.FES = ETH_EXACT_SPEED_100M_BPS; + ETH->CONFIG_b.PS = ETH_LINE_SPEED_10_100M_BPS; + } else { + ETH->CONFIG_b.FES = ETH_EXACT_SPEED_100M_BPS; + ETH->CONFIG_b.PS = ETH_LINE_SPEED_1000M_BPS; + } + + ETH->CONFIG_b.JE = init->ETH_JumboFrame; - ETH->CONFIG_b.JE = init->ETH_JumboFrame; - - ETH->CONFIG_b.JD = TRUE; - ETH->CONFIG_b.WD = TRUE; - ETH->CONFIG_b.TC = FALSE; - ETH->CONFIG_b.CST = TRUE; - ETH->CONFIG_b.TWOKPE = FALSE; - ETH->CONFIG_b.SARC = ETH_SOURCE_ADDR_REPLACE; + ETH->CONFIG_b.JD = TRUE; + ETH->CONFIG_b.WD = TRUE; + ETH->CONFIG_b.TC = FALSE; + ETH->CONFIG_b.CST = TRUE; + ETH->CONFIG_b.TWOKPE = FALSE; + ETH->CONFIG_b.SARC = ETH_SOURCE_ADDR_REPLACE; } static void mac_SetMacAddr(uint8_t *mac) { - ETH->ADDR0_HIGH = (mac[5] << 8) | mac[4]; - ETH->ADDR0_LOW = (mac[3] << 24) | (mac[2] << 16) | - (mac[1] << 8) | mac[0]; + ETH->ADDR0_HIGH = (mac[5] << 8) | mac[4]; + ETH->ADDR0_LOW = (mac[3] << 24) | (mac[2] << 16) | + (mac[1] << 8) | mac[0]; } static void mac_SetBurst( uint8_t mode, uint32_t rxBurstLen, uint32_t txBurstLen) { - ETH->BUS_MODE_b.RIB = FALSE; - ETH->BUS_MODE_b.AAL = FALSE; - - if (mode == ETH_BURST_MODE_FIXED) { - ETH->BUS_MODE_b.FB = TRUE; - ETH->BUS_MODE_b.MB = FALSE; - } else if (mode == ETH_BURST_MODE_UNDERSIZE) { - ETH->BUS_MODE_b.FB = FALSE; - ETH->BUS_MODE_b.MB = FALSE; - } else { - ETH->BUS_MODE_b.FB = TRUE; - ETH->BUS_MODE_b.MB = TRUE; - } - - rxBurstLen = 1 << rxBurstLen; - rxBurstLen = (rxBurstLen > ETH_BURST_LENGTH_MAX) ? - ETH_BURST_LENGTH_MAX : rxBurstLen; - - txBurstLen = 1 << txBurstLen; - txBurstLen = (txBurstLen > ETH_BURST_LENGTH_MAX) ? - ETH_BURST_LENGTH_MAX : txBurstLen; - - // Regrading PBLx8 register, if one of PBL and RPBL is more than - // ETH_BURST_LENGTH_8X_SWITCH, another should be more than - // ETH_BURST_LENGTH_8X_MIN. - // If not, the greater level down to ETH_BURST_LENGTH_8X_SWITCH. - if ((txBurstLen < ETH_BURST_LENGTH_8X_MIN) || - (rxBurstLen < ETH_BURST_LENGTH_8X_MIN)) { - if (rxBurstLen > ETH_BURST_LENGTH_8X_SWITCH) { - rxBurstLen = ETH_BURST_LENGTH_8X_SWITCH; - } - - if (txBurstLen > ETH_BURST_LENGTH_8X_SWITCH) { - txBurstLen = ETH_BURST_LENGTH_8X_SWITCH; - } - } - - ETH->BUS_MODE_b.USP = (rxBurstLen == txBurstLen) ? FALSE : TRUE; + ETH->BUS_MODE_b.RIB = FALSE; + ETH->BUS_MODE_b.AAL = FALSE; + + if (mode == ETH_BURST_MODE_FIXED) { + ETH->BUS_MODE_b.FB = TRUE; + ETH->BUS_MODE_b.MB = FALSE; + } else if (mode == ETH_BURST_MODE_UNDERSIZE) { + ETH->BUS_MODE_b.FB = FALSE; + ETH->BUS_MODE_b.MB = FALSE; + } else { + ETH->BUS_MODE_b.FB = TRUE; + ETH->BUS_MODE_b.MB = TRUE; + } + + rxBurstLen = 1 << rxBurstLen; + rxBurstLen = (rxBurstLen > ETH_BURST_LENGTH_MAX) ? + ETH_BURST_LENGTH_MAX : rxBurstLen; + + txBurstLen = 1 << txBurstLen; + txBurstLen = (txBurstLen > ETH_BURST_LENGTH_MAX) ? + ETH_BURST_LENGTH_MAX : txBurstLen; + + // Regrading PBLx8 register, if one of PBL and RPBL is more than + // ETH_BURST_LENGTH_8X_SWITCH, another should be more than + // ETH_BURST_LENGTH_8X_MIN. + // If not, the greater level down to ETH_BURST_LENGTH_8X_SWITCH. + if ((txBurstLen < ETH_BURST_LENGTH_8X_MIN) || + (rxBurstLen < ETH_BURST_LENGTH_8X_MIN)) { + if (rxBurstLen > ETH_BURST_LENGTH_8X_SWITCH) { + rxBurstLen = ETH_BURST_LENGTH_8X_SWITCH; + } + + if (txBurstLen > ETH_BURST_LENGTH_8X_SWITCH) { + txBurstLen = ETH_BURST_LENGTH_8X_SWITCH; + } + } + + ETH->BUS_MODE_b.USP = (rxBurstLen == txBurstLen) ? FALSE : TRUE; if ((txBurstLen > ETH_BURST_LENGTH_8X_SWITCH) || - (rxBurstLen > ETH_BURST_LENGTH_8X_SWITCH)) { - ETH->BUS_MODE_b.PBLx8 = TRUE; - } else { - ETH->BUS_MODE_b.PBLx8 = FALSE; - } - - if (ETH->BUS_MODE_b.PBLx8) { - ETH->BUS_MODE_b.RPBL = rxBurstLen >> 3; - ETH->BUS_MODE_b.PBL = txBurstLen >> 3; - } else { - ETH->BUS_MODE_b.RPBL = rxBurstLen; - ETH->BUS_MODE_b.PBL = txBurstLen; - } + (rxBurstLen > ETH_BURST_LENGTH_8X_SWITCH)) { + ETH->BUS_MODE_b.PBLx8 = TRUE; + } else { + ETH->BUS_MODE_b.PBLx8 = FALSE; + } + + if (ETH->BUS_MODE_b.PBLx8) { + ETH->BUS_MODE_b.RPBL = rxBurstLen >> 3; + ETH->BUS_MODE_b.PBL = txBurstLen >> 3; + } else { + ETH->BUS_MODE_b.RPBL = rxBurstLen; + ETH->BUS_MODE_b.PBL = txBurstLen; + } } static void mac_SetPriority(BOOL isRxPrior, uint8_t priorityRate) { ETH->BUS_MODE_b.PRWG = 0; - ETH->BUS_MODE_b.DA = ETH_DMA_ARBITRATION_ROUND_ROBIN; - - ETH->BUS_MODE_b.TXPR = isRxPrior ? FALSE : TRUE; - ETH->BUS_MODE_b.PR = priorityRate; + ETH->BUS_MODE_b.DA = ETH_DMA_ARBITRATION_ROUND_ROBIN; + + ETH->BUS_MODE_b.TXPR = isRxPrior ? FALSE : TRUE; + ETH->BUS_MODE_b.PR = priorityRate; } static void mac_SetDescMode(BOOL isAlternate, uint8_t gap) { ETH->BUS_MODE_b.ATDS = isAlternate; - ETH->BUS_MODE_b.DSL = gap; + ETH->BUS_MODE_b.DSL = gap; } static void mac_SetOpertionMode(void) { - ETH->OPERATION_b.OSF = FALSE; - ETH->OPERATION_b.RT = ETH_RX_THRESHOLD_32; - ETH->OPERATION_b.RSF = FALSE; - - ETH->OPERATION_b.DGF = FALSE; - ETH->OPERATION_b.FUF = FALSE; - ETH->OPERATION_b.FEF = FALSE; - ETH->OPERATION_b.TT = ETH_TX_THRESHOLD_64; - ETH->OPERATION_b.TSF = FALSE; - - ETH->OPERATION_b.FTF = TRUE; - ETH->OPERATION_b.DFF = TRUE; + ETH->OPERATION_b.OSF = FALSE; + ETH->OPERATION_b.RT = ETH_RX_THRESHOLD_32; + ETH->OPERATION_b.RSF = FALSE; + + ETH->OPERATION_b.DGF = FALSE; + ETH->OPERATION_b.FUF = FALSE; + ETH->OPERATION_b.FEF = FALSE; + ETH->OPERATION_b.TT = ETH_TX_THRESHOLD_64; + ETH->OPERATION_b.TSF = FALSE; + + ETH->OPERATION_b.FTF = TRUE; + ETH->OPERATION_b.DFF = TRUE; } static void mac_SetFrameFilter(ETH_FrameFilter *filter) { - ETH->FF_b.PR = FALSE; - ETH->FF_b.HUC = FALSE; - ETH->FF_b.HMC = FALSE; - ETH->FF_b.DAIF = FALSE; - ETH->FF_b.PM = FALSE; - ETH->FF_b.DBF = FALSE; - ETH->FF_b.PCF = ETH_PASS_CTRL_FRAME_ALL; - ETH->FF_b.SAIF = FALSE; - ETH->FF_b.SAF = FALSE; - ETH->FF_b.HPF = FALSE; - ETH->FF_b.VTFE = FALSE; - ETH->FF_b.IPFE = FALSE; - ETH->FF_b.DNTU = FALSE; - ETH->FF_b.RA = FALSE;//TRUE - - // receive all - if (!filter) { - return ; - } - - // broadcast - if (filter->ETH_BroadcastFilterEnable) { - ETH->FF_b.RA = FALSE; - ETH->FF_b.DBF = TRUE; - } - - // DA - if (filter->ETH_OwnFilterEnable) { - ETH->FF_b.RA = FALSE; - ETH->FF_b.DAIF = filter->ETH_SelfDrop; - } - - // SA - if (filter->ETH_SourceFilterEnable) { - uint32_t value; - + ETH->FF_b.PR = FALSE; + ETH->FF_b.HUC = FALSE; + ETH->FF_b.HMC = FALSE; + ETH->FF_b.DAIF = FALSE; + ETH->FF_b.PM = FALSE; + ETH->FF_b.DBF = FALSE; + ETH->FF_b.PCF = ETH_PASS_CTRL_FRAME_ALL; + ETH->FF_b.SAIF = FALSE; + ETH->FF_b.SAF = FALSE; + ETH->FF_b.HPF = FALSE; + ETH->FF_b.VTFE = FALSE; + ETH->FF_b.IPFE = FALSE; + ETH->FF_b.DNTU = FALSE; + ETH->FF_b.RA = FALSE;//TRUE + + // receive all + if (!filter) { + return ; + } + + // broadcast + if (filter->ETH_BroadcastFilterEnable) { + ETH->FF_b.RA = FALSE; + ETH->FF_b.DBF = TRUE; + } + + // DA + if (filter->ETH_OwnFilterEnable) { + ETH->FF_b.RA = FALSE; + ETH->FF_b.DAIF = filter->ETH_SelfDrop; + } + + // SA + if (filter->ETH_SourceFilterEnable) { + uint32_t value; + ETH->FF_b.RA = FALSE; - ETH->FF_b.SAF = TRUE; - ETH->FF_b.SAIF = filter->ETH_SourceDrop; - ETH->ADDR1_HIGH_b.AE = TRUE; - ETH->ADDR1_HIGH_b.SA = TRUE; - ETH->ADDR1_HIGH_b.ADDR = - (filter->ETH_SourceMacAddr[5] << 8) | filter->ETH_SourceMacAddr[4]; - - -// value = (filter->ETH_SourceMacAddr[5] << 8) | filter->ETH_SourceMacAddr[4]; + ETH->FF_b.SAF = TRUE; + ETH->FF_b.SAIF = filter->ETH_SourceDrop; + ETH->ADDR1_HIGH_b.AE = TRUE; + ETH->ADDR1_HIGH_b.SA = TRUE; + ETH->ADDR1_HIGH_b.ADDR = + (filter->ETH_SourceMacAddr[5] << 8) | filter->ETH_SourceMacAddr[4]; + + +// value = (filter->ETH_SourceMacAddr[5] << 8) | filter->ETH_SourceMacAddr[4]; // CMEM7_BFI(&(ETH->ADDR1_HIGH), value, 0, 16); - ETH->ADDR1_LOW = (filter->ETH_SourceMacAddr[3] << 24) | - (filter->ETH_SourceMacAddr[2] << 16) | - (filter->ETH_SourceMacAddr[1] << 8) | - filter->ETH_SourceMacAddr[0]; - } + ETH->ADDR1_LOW = (filter->ETH_SourceMacAddr[3] << 24) | + (filter->ETH_SourceMacAddr[2] << 16) | + (filter->ETH_SourceMacAddr[1] << 8) | + filter->ETH_SourceMacAddr[0]; + } } static void mac_setFlowControl(void) { ETH->FC_b.FCB = FALSE; - ETH->FC_b.TFE = FALSE;//TRUE - ETH->FC_b.RFE = FALSE;//TRUE - ETH->FC_b.UP = FALSE;//TRUE + ETH->FC_b.TFE = FALSE;//TRUE + ETH->FC_b.RFE = FALSE;//TRUE + ETH->FC_b.UP = FALSE;//TRUE } uint32_t ETH_PhyRead(uint32_t phyAddr, uint32_t phyReg) { - ETH->GMII_ADDR_b.PA = phyAddr; - ETH->GMII_ADDR_b.GR = phyReg; - ETH->GMII_ADDR_b.GW = PHY_OP_READ; + ETH->GMII_ADDR_b.PA = phyAddr; + ETH->GMII_ADDR_b.GR = phyReg; + ETH->GMII_ADDR_b.GW = PHY_OP_READ; + + ETH->GMII_ADDR_b.BUSY = TRUE; + while (ETH->GMII_ADDR_b.BUSY) ; - ETH->GMII_ADDR_b.BUSY = TRUE; - while (ETH->GMII_ADDR_b.BUSY) ; - - return ETH->GMII_DATA; + return ETH->GMII_DATA; } void ETH_PhyWrite(uint32_t phyAddr, uint32_t phyReg, uint32_t data) { - ETH->GMII_ADDR_b.PA = phyAddr; - ETH->GMII_ADDR_b.GR = phyReg; - ETH->GMII_ADDR_b.GW = PHY_OP_WRITE; + ETH->GMII_ADDR_b.PA = phyAddr; + ETH->GMII_ADDR_b.GR = phyReg; + ETH->GMII_ADDR_b.GW = PHY_OP_WRITE; ETH->GMII_DATA = data; - - ETH->GMII_ADDR_b.BUSY = TRUE; - while (ETH->GMII_ADDR_b.BUSY) ; + + ETH->GMII_ADDR_b.BUSY = TRUE; + while (ETH->GMII_ADDR_b.BUSY) ; } void ETH_StructInit(ETH_InitTypeDef* init) @@ -404,195 +404,195 @@ void ETH_StructInit(ETH_InitTypeDef* init) init->ETH_MacAddr[3] = 0; init->ETH_MacAddr[4] = 0; init->ETH_MacAddr[5] = 0; - + } BOOL ETH_Init(ETH_InitTypeDef *init) { assert_param(init); assert_param(IS_ETH_SPEED(init->ETH_Speed)); assert_param(IS_ETH_DUPLEX(init->ETH_Duplex)); - + mac_SwReset(); mac_SetConfig(init); mac_SetMacAddr(init->ETH_MacAddr); - + mac_SetBurst(ETH_BURST_MODE_MIXED, 3, 4); mac_SetPriority(TRUE, 0); mac_SetDescMode(TRUE, 0); mac_SetOpertionMode(); mac_SetFrameFilter(init->ETH_Filter); mac_setFlowControl(); - + return TRUE; } void ETH_ITConfig(uint32_t Int, BOOL enable) { - assert_param(IS_ETH_INT(Int)); - - if (enable) { - if (IS_ETH_INT_NORMAL(Int)) { - ETH->INT_EN_b.NIE = TRUE; - } - - if (IS_ETH_INT_ABNORMAL(Int)) { - ETH->INT_EN_b.AIE = TRUE; - } - - ETH->INT_EN |= Int; - } else { - ETH->INT_EN &= ~Int; - - if (!IS_ETH_INT_NORMAL(ETH->INT_EN)) { - ETH->INT_EN_b.NIE = FALSE; - } - - if (!IS_ETH_INT_ABNORMAL(ETH->INT_EN)) { - ETH->INT_EN_b.AIE = FALSE; - } - } + assert_param(IS_ETH_INT(Int)); + + if (enable) { + if (IS_ETH_INT_NORMAL(Int)) { + ETH->INT_EN_b.NIE = TRUE; + } + + if (IS_ETH_INT_ABNORMAL(Int)) { + ETH->INT_EN_b.AIE = TRUE; + } + + ETH->INT_EN |= Int; + } else { + ETH->INT_EN &= ~Int; + + if (!IS_ETH_INT_NORMAL(ETH->INT_EN)) { + ETH->INT_EN_b.NIE = FALSE; + } + + if (!IS_ETH_INT_ABNORMAL(ETH->INT_EN)) { + ETH->INT_EN_b.AIE = FALSE; + } + } } BOOL ETH_GetITStatus(uint32_t Int) { - assert_param(IS_ETH_INT(Int)); - - Int &= ETH->INT_EN; - if (0 != (ETH->STATUS & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_ETH_INT(Int)); + + Int &= ETH->INT_EN; + if (0 != (ETH->STATUS & Int)) { + return TRUE; + } + + return FALSE; } void ETH_ClearITPendingBit(uint32_t Int) { - uint32_t sta; - assert_param(IS_ETH_INT(Int)); - - sta = ETH->STATUS; - sta &= ETH->INT_EN; - sta &= ~Int; - - // write 1 clear - ETH->STATUS = Int; - - if (IS_ETH_INT_NORMAL(Int)) { - if (!IS_ETH_INT_NORMAL(sta)) { - // write 1 clear NIS - ETH->STATUS = ETH_INT_NORMAL_SUMMARY; - } - } - - if (IS_ETH_INT_ABNORMAL(Int)) { - if (!IS_ETH_INT_ABNORMAL(sta)) { - // write 1 clear AIS - ETH->STATUS = ETH_INT_ABNORMAL_SUMMARY; - } - } + uint32_t sta; + assert_param(IS_ETH_INT(Int)); + + sta = ETH->STATUS; + sta &= ETH->INT_EN; + sta &= ~Int; + + // write 1 clear + ETH->STATUS = Int; + + if (IS_ETH_INT_NORMAL(Int)) { + if (!IS_ETH_INT_NORMAL(sta)) { + // write 1 clear NIS + ETH->STATUS = ETH_INT_NORMAL_SUMMARY; + } + } + + if (IS_ETH_INT_ABNORMAL(Int)) { + if (!IS_ETH_INT_ABNORMAL(sta)) { + // write 1 clear AIS + ETH->STATUS = ETH_INT_ABNORMAL_SUMMARY; + } + } } void ETH_GetMacAddr(uint8_t *mac) { uint32_t tmp; - - if (!mac) { - return ; - } - - tmp = ETH->ADDR0_LOW; - *(mac + 0) = (tmp >> 0) & 0xFF; - *(mac + 1) = (tmp >> 8) & 0xFF; - *(mac + 2) = (tmp >> 16) & 0xFF; - *(mac + 3) = (tmp >> 24) & 0xFF; - tmp = ETH->ADDR0_HIGH; - *(mac + 4) = (tmp >> 0) & 0xFF; - *(mac + 5) = (tmp >> 8) & 0xFF; + + if (!mac) { + return ; + } + + tmp = ETH->ADDR0_LOW; + *(mac + 0) = (tmp >> 0) & 0xFF; + *(mac + 1) = (tmp >> 8) & 0xFF; + *(mac + 2) = (tmp >> 16) & 0xFF; + *(mac + 3) = (tmp >> 24) & 0xFF; + tmp = ETH->ADDR0_HIGH; + *(mac + 4) = (tmp >> 0) & 0xFF; + *(mac + 5) = (tmp >> 8) & 0xFF; } BOOL ETH_SetTxDescRing(ETH_TX_DESC *ring) { - ETH_TX_DESC *buf = ring; - - if (!ring) { - return FALSE; - } - - if (ETH->OPERATION_b.ST) { - return FALSE; - } + ETH_TX_DESC *buf = ring; + + if (!ring) { + return FALSE; + } + + if (ETH->OPERATION_b.ST) { + return FALSE; + } /* If code mapping */ ring = (ETH_TX_DESC *)GLB_ConvertToMappingFromAddr((uint32_t)ring); buf = ring; - - do { - INNER_ETH_TX_DESC *desc = (INNER_ETH_TX_DESC *)buf; + + do { + INNER_ETH_TX_DESC *desc = (INNER_ETH_TX_DESC *)buf; uint8_t first = desc->TX_0.TX0_b.FS; uint8_t last = desc->TX_0.TX0_b.LS; - + // clear all bits desc->TX_0.TX0 = 0; desc->TX_0.TX0_b.FS = first; desc->TX_0.TX0_b.LS = last; - desc->TX_0.TX0_b.TCH = TRUE; - desc->TX_0.TX0_b.IC = TRUE; - desc->TX_0.TX0_b.OWN = ETH_DESC_OWN_BY_SELF; - + desc->TX_0.TX0_b.TCH = TRUE; + desc->TX_0.TX0_b.IC = TRUE; + desc->TX_0.TX0_b.OWN = ETH_DESC_OWN_BY_SELF; + buf->bufAddr = GLB_ConvertToMappingFromAddr(buf->bufAddr); buf->nextDescAddr = GLB_ConvertToMappingFromAddr(buf->nextDescAddr); - buf = (ETH_TX_DESC *)buf->nextDescAddr; - } while (buf != ring); - - ETH->TDESLA = (uint32_t)ring; - - return TRUE; + buf = (ETH_TX_DESC *)buf->nextDescAddr; + } while (buf != ring); + + ETH->TDESLA = (uint32_t)ring; + + return TRUE; } void ETH_StartTx() { - ETH->OPERATION_b.ST = TRUE; + ETH->OPERATION_b.ST = TRUE; } void ETH_StopTx() { - ETH->OPERATION_b.ST = FALSE; + ETH->OPERATION_b.ST = FALSE; } void ETH_ResumeTx() { - ETH->TPD = 0; + ETH->TPD = 0; } ETH_TX_DESC *ETH_AcquireFreeTxDesc(void) { - uint32_t cur = ETH->CURTDESAPTR; - INNER_ETH_TX_DESC *desc = (INNER_ETH_TX_DESC *)cur; - - do { - if (desc->TX_0.TX0_b.OWN == ETH_DESC_OWN_BY_SELF) { - return (ETH_TX_DESC *)desc; - } - desc = (INNER_ETH_TX_DESC *)desc->nextDescAddr; - } while ((uint32_t)desc != cur); - - return 0; + uint32_t cur = ETH->CURTDESAPTR; + INNER_ETH_TX_DESC *desc = (INNER_ETH_TX_DESC *)cur; + + do { + if (desc->TX_0.TX0_b.OWN == ETH_DESC_OWN_BY_SELF) { + return (ETH_TX_DESC *)desc; + } + desc = (INNER_ETH_TX_DESC *)desc->nextDescAddr; + } while ((uint32_t)desc != cur); + + return 0; } BOOL ETH_IsFreeTxDesc(ETH_TX_DESC *desc) { - INNER_ETH_TX_DESC *inner; - - if (!desc) { - return FALSE; - } - - inner = (INNER_ETH_TX_DESC *)desc; - return (inner->TX_0.TX0_b.OWN == ETH_DESC_OWN_BY_SELF) ? TRUE : FALSE; + INNER_ETH_TX_DESC *inner; + + if (!desc) { + return FALSE; + } + + inner = (INNER_ETH_TX_DESC *)desc; + return (inner->TX_0.TX0_b.OWN == ETH_DESC_OWN_BY_SELF) ? TRUE : FALSE; } void ETH_ReleaseTxDesc(ETH_TX_DESC *desc) { - INNER_ETH_TX_DESC *inner; - - if (!desc) { - return; - } - - inner = (INNER_ETH_TX_DESC *)desc; - inner->TX_0.TX0_b.OWN = ETH_DESC_OWN_BY_HW; + INNER_ETH_TX_DESC *inner; + + if (!desc) { + return; + } + + inner = (INNER_ETH_TX_DESC *)desc; + inner->TX_0.TX0_b.OWN = ETH_DESC_OWN_BY_HW; } void ETH_SetTxDescBufAddr(ETH_TX_DESC *desc, uint32_t bufAddr) { - if (desc) { - desc->bufAddr = GLB_ConvertToMappingFromAddr(bufAddr);; - } + if (desc) { + desc->bufAddr = GLB_ConvertToMappingFromAddr(bufAddr);; + } } uint32_t ETH_GetTxDescBufAddr(ETH_TX_DESC *desc) { @@ -600,88 +600,88 @@ uint32_t ETH_GetTxDescBufAddr(ETH_TX_DESC *desc) { } BOOL ETH_SetRxDescRing(ETH_RX_DESC *ring) { - ETH_RX_DESC *buf = ring; - - if (!ring) { - return FALSE; - } - - if (ETH->OPERATION_b.SR) { - return FALSE; - } + ETH_RX_DESC *buf = ring; + + if (!ring) { + return FALSE; + } + + if (ETH->OPERATION_b.SR) { + return FALSE; + } /* If code mapping */ ring = (ETH_RX_DESC *)GLB_ConvertToMappingFromAddr((uint32_t)ring); buf = ring; - do { - INNER_ETH_RX_DESC *desc = (INNER_ETH_RX_DESC *)buf; - desc->RX_1.RX1_b.RCH = TRUE; - desc->RX_1.RX1_b.DIC = FALSE; - desc->RX_0.RX0_b.OWN = ETH_DESC_OWN_BY_HW; + do { + INNER_ETH_RX_DESC *desc = (INNER_ETH_RX_DESC *)buf; + desc->RX_1.RX1_b.RCH = TRUE; + desc->RX_1.RX1_b.DIC = FALSE; + desc->RX_0.RX0_b.OWN = ETH_DESC_OWN_BY_HW; buf->bufAddr = GLB_ConvertToMappingFromAddr(buf->bufAddr); buf->nextDescAddr = GLB_ConvertToMappingFromAddr(buf->nextDescAddr); - buf = (ETH_RX_DESC *)buf->nextDescAddr; - } while (buf != ring); - - ETH->RDESLA = (uint32_t)ring; - - return TRUE; + buf = (ETH_RX_DESC *)buf->nextDescAddr; + } while (buf != ring); + + ETH->RDESLA = (uint32_t)ring; + + return TRUE; } void ETH_StartRx() { - ETH->OPERATION_b.SR = TRUE; + ETH->OPERATION_b.SR = TRUE; } void ETH_StopRx() { - ETH->OPERATION_b.SR = FALSE; + ETH->OPERATION_b.SR = FALSE; } void ETH_ResumeRx() { - ETH->RPD = 0; + ETH->RPD = 0; } ETH_RX_DESC *ETH_AcquireFreeRxDesc(void) { - uint32_t cur = ETH->CURRDESAPTR; - INNER_ETH_RX_DESC *desc = (INNER_ETH_RX_DESC *)cur; - - do { - if (desc->RX_0.RX0_b.OWN == ETH_DESC_OWN_BY_SELF) { - return (ETH_RX_DESC *)desc; - } - desc = (INNER_ETH_RX_DESC *)desc->nextDescAddr; - } while ((uint32_t)desc != cur); - - return 0; + uint32_t cur = ETH->CURRDESAPTR; + INNER_ETH_RX_DESC *desc = (INNER_ETH_RX_DESC *)cur; + + do { + if (desc->RX_0.RX0_b.OWN == ETH_DESC_OWN_BY_SELF) { + return (ETH_RX_DESC *)desc; + } + desc = (INNER_ETH_RX_DESC *)desc->nextDescAddr; + } while ((uint32_t)desc != cur); + + return 0; } BOOL ETH_IsFreeRxDesc(ETH_RX_DESC *desc) { - INNER_ETH_RX_DESC *inner; - - if (!desc) { - return FALSE; - } - - inner = (INNER_ETH_RX_DESC *)desc; - return (inner->RX_0.RX0_b.OWN == ETH_DESC_OWN_BY_SELF) ? TRUE : FALSE; + INNER_ETH_RX_DESC *inner; + + if (!desc) { + return FALSE; + } + + inner = (INNER_ETH_RX_DESC *)desc; + return (inner->RX_0.RX0_b.OWN == ETH_DESC_OWN_BY_SELF) ? TRUE : FALSE; } void ETH_ReleaseRxDesc(ETH_RX_DESC *desc) { - INNER_ETH_RX_DESC *inner; - - if (!desc) { - return; - } - - inner = (INNER_ETH_RX_DESC *)desc; - inner->RX_0.RX0_b.OWN = ETH_DESC_OWN_BY_HW; + INNER_ETH_RX_DESC *inner; + + if (!desc) { + return; + } + + inner = (INNER_ETH_RX_DESC *)desc; + inner->RX_0.RX0_b.OWN = ETH_DESC_OWN_BY_HW; } void ETH_SetRxDescBufAddr(ETH_RX_DESC *desc, uint32_t bufAddr) { - if (desc) { - desc->bufAddr = GLB_ConvertToMappingFromAddr(bufAddr);; - } + if (desc) { + desc->bufAddr = GLB_ConvertToMappingFromAddr(bufAddr);; + } } uint32_t ETH_GetRxDescBufAddr(ETH_RX_DESC *desc) { diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c index 8fc764abf6..16b45ba20d 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_flash.c @@ -1,35 +1,35 @@ /** - ***************************************************************************** - * @file cmem7_flash.c - * - * @brief CMEM7 flash controller source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_flash.c + * + * @brief CMEM7 flash controller source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_flash.h" typedef struct { union { uint16_t STATUS; /*!< status register */ - + struct { uint16_t WIP: 1; /*!< in writting */ uint16_t WEL: 1; /*!< write enable */ @@ -76,325 +76,325 @@ typedef void (*WAIT)(void); static WAIT wait; static void flash_setClock(uint8_t dividor) { - dividor = (dividor < 2) ? 2 : dividor; - NOR_FLASH->CTRL0_b.DIV = dividor / 2 - 1; + dividor = (dividor < 2) ? 2 : dividor; + NOR_FLASH->CTRL0_b.DIV = dividor / 2 - 1; } static void flash_cleanOperation() { - NOR_FLASH->TRIGGER_b.OP_CLEAN = TRUE; - while (NOR_FLASH->STATUS_b.BUSY); - - NOR_FLASH->TRIGGER_b.OP_CLEAN = FALSE; - while (NOR_FLASH->STATUS_b.BUSY); + NOR_FLASH->TRIGGER_b.OP_CLEAN = TRUE; + while (NOR_FLASH->STATUS_b.BUSY); + + NOR_FLASH->TRIGGER_b.OP_CLEAN = FALSE; + while (NOR_FLASH->STATUS_b.BUSY); } static uint8_t flash_ReadInnerStatusLow() { - NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 1; - NOR_FLASH->CTRL1_b.CMD = FLASH_CMD_RD_INNER_STATUS_LOW; - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - while (NOR_FLASH->STATUS_b.BUSY); - - return (uint8_t)NOR_FLASH->DATA; + NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 1; + NOR_FLASH->CTRL1_b.CMD = FLASH_CMD_RD_INNER_STATUS_LOW; + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + while (NOR_FLASH->STATUS_b.BUSY); + + return (uint8_t)NOR_FLASH->DATA; } static uint8_t flash_ReadInnerStatusHigh() { NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 1; - NOR_FLASH->CTRL1_b.CMD = FLASH_CMD_RD_INNER_STATUS_HIGH; - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - while (NOR_FLASH->STATUS_b.BUSY); - - return (uint8_t)NOR_FLASH->DATA; + NOR_FLASH->CTRL1_b.CMD = FLASH_CMD_RD_INNER_STATUS_HIGH; + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + while (NOR_FLASH->STATUS_b.BUSY); + + return (uint8_t)NOR_FLASH->DATA; } //static void flash_WaitInWritting() { void flash_WaitInWritting(void) { - FLASH_INNER_STATUS s; - - while (NOR_FLASH->STATUS_b.BUSY); - - do { - s.INNER.STATUS = flash_ReadInnerStatusLow(); - if (!s.INNER.STATUS_b.WIP) { - break; - } - - if (wait) { - (*wait)(); - } - } while (1); + FLASH_INNER_STATUS s; + + while (NOR_FLASH->STATUS_b.BUSY); + + do { + s.INNER.STATUS = flash_ReadInnerStatusLow(); + if (!s.INNER.STATUS_b.WIP) { + break; + } + + if (wait) { + (*wait)(); + } + } while (1); } static void flash_WriteWriteEnable(BOOL enable) { NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 0; - NOR_FLASH->CTRL1_b.CMD = - enable ? FLASH_CMD_WR_WRITE_ENABLE : FLASH_CMD_WR_WRITE_DISABLE; - - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - flash_WaitInWritting(); + NOR_FLASH->CTRL1_b.CMD = + enable ? FLASH_CMD_WR_WRITE_ENABLE : FLASH_CMD_WR_WRITE_DISABLE; + + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + flash_WaitInWritting(); } static void flash_WriteStatusReg(FLASH_INNER_STATUS *s) { uint16_t tmp = s->INNER.STATUS; - - NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 2; - NOR_FLASH->CTRL1_b.CMD = FLASH_CME_WR_STATUS_REG; - NOR_FLASH->DATA = ((tmp << 8) | (tmp >> 8)) << 16; - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - flash_WaitInWritting(); + + NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 2; + NOR_FLASH->CTRL1_b.CMD = FLASH_CME_WR_STATUS_REG; + NOR_FLASH->DATA = ((tmp << 8) | (tmp >> 8)) << 16; + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + flash_WaitInWritting(); } -static void flash_Erase(uint8_t cmd, uint32_t addr) { - NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 0; - NOR_FLASH->CTRL1_b.CMD = cmd; - NOR_FLASH->CTRL1_b.ADDRESS = addr; - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - flash_WaitInWritting(); +static void flash_Erase(uint8_t cmd, uint32_t addr) { + NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 0; + NOR_FLASH->CTRL1_b.CMD = cmd; + NOR_FLASH->CTRL1_b.ADDRESS = addr; + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + flash_WaitInWritting(); } static void flash_WriteDeepPowerDownEnable(BOOL enable) { NOR_FLASH->CTRL0_b.RW_BYTE_CNT = 0; - NOR_FLASH->CTRL1_b.CMD = - enable ? FLASH_CME_WR_ENTER_DEEP_PD : FLASH_CME_WR_EXIT_DEEP_PD; - - NOR_FLASH->TRIGGER_b.OP_START = TRUE; - - flash_WaitInWritting(); + NOR_FLASH->CTRL1_b.CMD = + enable ? FLASH_CME_WR_ENTER_DEEP_PD : FLASH_CME_WR_EXIT_DEEP_PD; + + NOR_FLASH->TRIGGER_b.OP_START = TRUE; + + flash_WaitInWritting(); } static void flash_RwReq(uint8_t cmd, uint32_t addr, uint16_t size) { - NOR_FLASH->CTRL0_b.RW_BYTE_CNT = size; - NOR_FLASH->CTRL1_b.CMD = cmd; - NOR_FLASH->CTRL1_b.ADDRESS = addr; - - NOR_FLASH->TRIGGER_b.OP_START = TRUE; + NOR_FLASH->CTRL0_b.RW_BYTE_CNT = size; + NOR_FLASH->CTRL1_b.CMD = cmd; + NOR_FLASH->CTRL1_b.ADDRESS = addr; + + NOR_FLASH->TRIGGER_b.OP_START = TRUE; } //static void flash_WaitReadFifoNotEmpty() { void flash_WaitReadFifoNotEmpty(void) { - while (NOR_FLASH->STATUS_b.RD_FIFO_EMPTY) { - if (wait) { - (*wait)(); - } - } + while (NOR_FLASH->STATUS_b.RD_FIFO_EMPTY) { + if (wait) { + (*wait)(); + } + } } //static uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) { uint16_t flash_ReadFifo(uint16_t size, uint8_t* data) { - uint16_t count = 0; - - while (!NOR_FLASH->STATUS_b.RD_FIFO_EMPTY && size != 0) { - uint32_t d = NOR_FLASH->DATA; - if (size > 3) { - *(data + count++) = d >> 24; - *(data + count++) = (d & 0x00FF0000) >> 16; - *(data + count++) = (d & 0x0000FF00) >> 8; - *(data + count++) = (d & 0x000000FF); - size -= 4; - } else if (size == 3) { - *(data + count++) = (d & 0x00FF0000) >> 16; - *(data + count++) = (d & 0x0000FF00) >> 8; - *(data + count++) = (d & 0x000000FF); - size -= 3; - } else if (size == 2) { - *(data + count++) = (d & 0x0000FF00) >> 8; - *(data + count++) = (d & 0x000000FF); - size -= 2; - } else if (size == 1) { - *(data + count++) = (d & 0x000000FF); - size -= 1; - } - } - - return count; + uint16_t count = 0; + + while (!NOR_FLASH->STATUS_b.RD_FIFO_EMPTY && size != 0) { + uint32_t d = NOR_FLASH->DATA; + if (size > 3) { + *(data + count++) = d >> 24; + *(data + count++) = (d & 0x00FF0000) >> 16; + *(data + count++) = (d & 0x0000FF00) >> 8; + *(data + count++) = (d & 0x000000FF); + size -= 4; + } else if (size == 3) { + *(data + count++) = (d & 0x00FF0000) >> 16; + *(data + count++) = (d & 0x0000FF00) >> 8; + *(data + count++) = (d & 0x000000FF); + size -= 3; + } else if (size == 2) { + *(data + count++) = (d & 0x0000FF00) >> 8; + *(data + count++) = (d & 0x000000FF); + size -= 2; + } else if (size == 1) { + *(data + count++) = (d & 0x000000FF); + size -= 1; + } + } + + return count; } static uint16_t flash_WriteFifo(uint16_t size, uint8_t* data) { - uint16_t count = 0; - - while (!NOR_FLASH->STATUS_b.WR_FIFO_FULL && size != 0) { - uint32_t d = 0; - - if (size > 3) { - d = *(data + count++) << 24; - d |= *(data + count++) << 16; - d |= *(data + count++) << 8; - d |= *(data + count++); - size -= 4; - } else if (size == 3) { - d = *(data + count++) << 24; - d |= *(data + count++) << 16; - d |= *(data + count++) << 8; - size -= 3; - } else if (size == 2) { - d = *(data + count++) << 24; - d |= *(data + count++) << 16; - size -= 2; - } else if (size == 1) { - d = *(data + count++) << 24; - size -= 1; - } - - NOR_FLASH->DATA = d; - } - - return count; + uint16_t count = 0; + + while (!NOR_FLASH->STATUS_b.WR_FIFO_FULL && size != 0) { + uint32_t d = 0; + + if (size > 3) { + d = *(data + count++) << 24; + d |= *(data + count++) << 16; + d |= *(data + count++) << 8; + d |= *(data + count++); + size -= 4; + } else if (size == 3) { + d = *(data + count++) << 24; + d |= *(data + count++) << 16; + d |= *(data + count++) << 8; + size -= 3; + } else if (size == 2) { + d = *(data + count++) << 24; + d |= *(data + count++) << 16; + size -= 2; + } else if (size == 1) { + d = *(data + count++) << 24; + size -= 1; + } + + NOR_FLASH->DATA = d; + } + + return count; } static uint16_t flash_WritePage(uint32_t addr, uint16_t size, uint8_t* data) { - uint16_t actualSize, retSize; - - flash_WriteWriteEnable(TRUE); - - actualSize = FLASH_PAGE_SIZE - (addr & (FLASH_PAGE_SIZE - 1)); - actualSize = (size > actualSize) ? actualSize : size; + uint16_t actualSize, retSize; + + flash_WriteWriteEnable(TRUE); + + actualSize = FLASH_PAGE_SIZE - (addr & (FLASH_PAGE_SIZE - 1)); + actualSize = (size > actualSize) ? actualSize : size; retSize = actualSize; - - flash_RwReq(FLASH_CME_WR, addr, actualSize); - - while (actualSize != 0) { - uint8_t count = flash_WriteFifo(actualSize, data); - - actualSize -= count; - data += count; - } - - flash_WaitInWritting(); - - return retSize; + + flash_RwReq(FLASH_CME_WR, addr, actualSize); + + while (actualSize != 0) { + uint8_t count = flash_WriteFifo(actualSize, data); + + actualSize -= count; + data += count; + } + + flash_WaitInWritting(); + + return retSize; } void FLASH_Init(FLASH_InitTypeDef* init) { - FLASH_INNER_STATUS s; - - assert_param(init); - assert_param(IS_FLASH_PROTECT_MODE(init->FLASH_ProtectMode)); - assert_param(IS_FLASH_PROTECT_REGION(init->FLASH_ProtectRegion)); - - wait = init->FLASH_Wait; - flash_setClock(init->FLASH_ClockDividor); - - flash_cleanOperation(); - - flash_WaitInWritting(); - - s.INNER.STATUS = flash_ReadInnerStatusLow(); - s.INNER.STATUS |= ((uint16_t)flash_ReadInnerStatusHigh()) << 8; - s.INNER.STATUS_b.BP = init->FLASH_ProtectRegion; - s.INNER.STATUS_b.SRP = init->FLASH_ProtectMode; - s.INNER.STATUS_b.QE = init->FLASH_QuadEnable; + FLASH_INNER_STATUS s; + + assert_param(init); + assert_param(IS_FLASH_PROTECT_MODE(init->FLASH_ProtectMode)); + assert_param(IS_FLASH_PROTECT_REGION(init->FLASH_ProtectRegion)); + + wait = init->FLASH_Wait; + flash_setClock(init->FLASH_ClockDividor); - flash_WriteWriteEnable(TRUE); - flash_WriteStatusReg(&s); + flash_cleanOperation(); + + flash_WaitInWritting(); + + s.INNER.STATUS = flash_ReadInnerStatusLow(); + s.INNER.STATUS |= ((uint16_t)flash_ReadInnerStatusHigh()) << 8; + s.INNER.STATUS_b.BP = init->FLASH_ProtectRegion; + s.INNER.STATUS_b.SRP = init->FLASH_ProtectMode; + s.INNER.STATUS_b.QE = init->FLASH_QuadEnable; + + flash_WriteWriteEnable(TRUE); + flash_WriteStatusReg(&s); } void FLASH_GetStatus(uint8_t* ProtectMode, uint8_t* ProtectRegion, BOOL* QuadEnable) { - FLASH_INNER_STATUS s; - - assert_param(ProtectMode); - assert_param(ProtectRegion); - assert_param(QuadEnable); - - flash_WaitInWritting(); - - s.INNER.STATUS = flash_ReadInnerStatusLow(); - s.INNER.STATUS |= ((uint16_t)flash_ReadInnerStatusHigh()) << 8; - *ProtectRegion = s.INNER.STATUS_b.BP; - *ProtectMode = s.INNER.STATUS_b.SRP; - *QuadEnable = (s.INNER.STATUS_b.QE == 1) ? TRUE : FALSE; + FLASH_INNER_STATUS s; + + assert_param(ProtectMode); + assert_param(ProtectRegion); + assert_param(QuadEnable); + + flash_WaitInWritting(); + + s.INNER.STATUS = flash_ReadInnerStatusLow(); + s.INNER.STATUS |= ((uint16_t)flash_ReadInnerStatusHigh()) << 8; + *ProtectRegion = s.INNER.STATUS_b.BP; + *ProtectMode = s.INNER.STATUS_b.SRP; + *QuadEnable = (s.INNER.STATUS_b.QE == 1) ? TRUE : FALSE; } void FLASH_EraseSector(uint32_t addr) { - flash_WaitInWritting(); - flash_WriteWriteEnable(TRUE); - - addr = (addr << 8) >> 8; - addr = addr / FLASH_SECTOR_SIZE * FLASH_SECTOR_SIZE; - flash_Erase(FLASH_CME_ERASE_SECTOR, addr); + flash_WaitInWritting(); + flash_WriteWriteEnable(TRUE); + + addr = (addr << 8) >> 8; + addr = addr / FLASH_SECTOR_SIZE * FLASH_SECTOR_SIZE; + flash_Erase(FLASH_CME_ERASE_SECTOR, addr); } void FLASH_Erase32kBlock(uint32_t addr) { - flash_WaitInWritting(); - flash_WriteWriteEnable(TRUE); - - addr = (addr << 8) >> 8; - addr = addr / FLASH_BLOCK_32K_SIZE * FLASH_BLOCK_32K_SIZE; - flash_Erase(FLASH_CME_ERASE_BLOCK_32K, addr); + flash_WaitInWritting(); + flash_WriteWriteEnable(TRUE); + + addr = (addr << 8) >> 8; + addr = addr / FLASH_BLOCK_32K_SIZE * FLASH_BLOCK_32K_SIZE; + flash_Erase(FLASH_CME_ERASE_BLOCK_32K, addr); } void FLASH_Erase64kBlock(uint32_t addr) { - flash_WaitInWritting(); - flash_WriteWriteEnable(TRUE); - - addr = (addr << 8) >> 8; - addr = addr / FLASH_BLOCK_64K_SIZE * FLASH_BLOCK_64K_SIZE; - flash_Erase(FLASH_CME_ERASE_BLOCK_64K, addr); + flash_WaitInWritting(); + flash_WriteWriteEnable(TRUE); + + addr = (addr << 8) >> 8; + addr = addr / FLASH_BLOCK_64K_SIZE * FLASH_BLOCK_64K_SIZE; + flash_Erase(FLASH_CME_ERASE_BLOCK_64K, addr); } void FLASH_EraseChip(void) { - flash_WaitInWritting(); - flash_WriteWriteEnable(TRUE); - flash_Erase(FLASH_CME_ERASE_CHIP, 0x0); + flash_WaitInWritting(); + flash_WriteWriteEnable(TRUE); + flash_Erase(FLASH_CME_ERASE_CHIP, 0x0); } void FLASH_EnableDeepPowerDown(BOOL enable) { - flash_WaitInWritting(); - flash_WriteWriteEnable(TRUE); - flash_WriteDeepPowerDownEnable(enable); + flash_WaitInWritting(); + flash_WriteWriteEnable(TRUE); + flash_WriteDeepPowerDownEnable(enable); } void FLASH_Read(uint8_t ReadMode, uint32_t addr, uint16_t size, uint8_t* data) { - uint8_t cmd; - - assert_param(IS_FLASH_READ_MODE(ReadMode)); - assert_param(addr + size <= FLASH_MAX_SIZE); - assert_param(data); - - if (size == 0) { - return ; - } - - flash_WaitInWritting(); - - if (ReadMode == FLASH_READ_MODE_NORMAL) { - cmd = FLASH_CME_RD_NORMAL; - } else if (ReadMode == FLASH_READ_MODE_FAST) { - cmd = FLASH_CME_RD_FAST; - } else if (ReadMode == FLASH_READ_MODE_FAST_DUAL) { - cmd = FLASH_CME_RD_FAST_DUAL; - } else { - cmd = FLASH_CME_RD_FAST_QUAD; - } - - flash_RwReq(cmd, addr, size); - + uint8_t cmd; + + assert_param(IS_FLASH_READ_MODE(ReadMode)); + assert_param(addr + size <= FLASH_MAX_SIZE); + assert_param(data); + + if (size == 0) { + return ; + } + + flash_WaitInWritting(); + + if (ReadMode == FLASH_READ_MODE_NORMAL) { + cmd = FLASH_CME_RD_NORMAL; + } else if (ReadMode == FLASH_READ_MODE_FAST) { + cmd = FLASH_CME_RD_FAST; + } else if (ReadMode == FLASH_READ_MODE_FAST_DUAL) { + cmd = FLASH_CME_RD_FAST_DUAL; + } else { + cmd = FLASH_CME_RD_FAST_QUAD; + } + + flash_RwReq(cmd, addr, size); + while (size > 0) { - uint16_t count = 0; - + uint16_t count = 0; + flash_WaitReadFifoNotEmpty(); - - count = flash_ReadFifo(size, data); - size -= count; - data += count; - } + + count = flash_ReadFifo(size, data); + size -= count; + data += count; + } } void FLASH_Write(uint32_t addr, uint16_t size, uint8_t* data) { - assert_param(addr + size <= FLASH_MAX_SIZE); - assert_param(data); - - flash_WaitInWritting(); - - while (size > 0) { - uint16_t count = flash_WritePage(addr, size, data); + assert_param(addr + size <= FLASH_MAX_SIZE); + assert_param(data); + + flash_WaitInWritting(); + + while (size > 0) { + uint16_t count = flash_WritePage(addr, size, data); - addr += count; - size -= count; - data += count; - } + addr += count; + size -= count; + data += count; + } } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c index 785c8a0767..be827127d2 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c @@ -1,204 +1,204 @@ /** - ***************************************************************************** - * @file cmem7_gpio.c - * - * @brief CMEM7 GPIO source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_gpio.c + * + * @brief CMEM7 GPIO source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_gpio.h" -#define GPIO_GROUP_GPIO_H (GPIO_GROUP_GPIO + 1) -#define GPIO_GROUP_GPIO_N (GPIO_GROUP_GPIO + 2) +#define GPIO_GROUP_GPIO_H (GPIO_GROUP_GPIO + 1) +#define GPIO_GROUP_GPIO_N (GPIO_GROUP_GPIO + 2) #define IS_INNER_GPIO_GROUP(GROUP) (((GROUP) == GPIO_GROUP_GPIO) || \ - ((GROUP) == GPIO_GROUP_GPIO_H) || \ - ((GROUP) == GPIO_GROUP_GPIO_N)) + ((GROUP) == GPIO_GROUP_GPIO_H) || \ + ((GROUP) == GPIO_GROUP_GPIO_N)) + +#define GPIO_PWM_CHANNEL_GPIO_H_9 (GPIO_PWM_CHANNEL_GPIO_31 + 1) +#define GPIO_PWM_CHANNEL_GPIO_H_19 (GPIO_PWM_CHANNEL_GPIO_31 + 2) +#define GPIO_PWM_CHANNEL_GPIO_H_20 (GPIO_PWM_CHANNEL_GPIO_31 + 3) -#define GPIO_PWM_CHANNEL_GPIO_H_9 (GPIO_PWM_CHANNEL_GPIO_31 + 1) -#define GPIO_PWM_CHANNEL_GPIO_H_19 (GPIO_PWM_CHANNEL_GPIO_31 + 2) -#define GPIO_PWM_CHANNEL_GPIO_H_20 (GPIO_PWM_CHANNEL_GPIO_31 + 3) - #define IS_INNER_GPIO_PWM_CHANNEL(CHANNEL) (((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_31) || \ ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_9) || \ ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_19) || \ ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_20)) static uint32_t gpio_GetClock() { - return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.GPIO_CLK + 1)); + return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.GPIO_CLK + 1)); } void GPIO_Init(uint8_t Group, uint32_t PositiveTrigger) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - GPIO->GPIO_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; - } else if (Group == GPIO_GROUP_GPIO_H) { - GPIO->GPIO_H_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; - } else { - GPIO->GPIO_N_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; - } + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + GPIO->GPIO_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; + } else if (Group == GPIO_GROUP_GPIO_H) { + GPIO->GPIO_H_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; + } else { + GPIO->GPIO_N_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger; + } } void GPIO_EnableOutput(uint8_t Group, uint32_t Enable) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - GPIO->GPIO_OE = Enable; - } else if (Group == GPIO_GROUP_GPIO_H) { - GPIO->GPIO_H_OE = Enable; - } else { - GPIO->GPIO_N_OE = Enable; - } + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + GPIO->GPIO_OE = Enable; + } else if (Group == GPIO_GROUP_GPIO_H) { + GPIO->GPIO_H_OE = Enable; + } else { + GPIO->GPIO_N_OE = Enable; + } } void GPIO_EnableInt(uint8_t Group, uint32_t Enable) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - GPIO->GPIO_INT_MASK = ~Enable; - } else if (Group == GPIO_GROUP_GPIO_H) { - GPIO->GPIO_H_INT_MASK = ~Enable; - } else { - GPIO->GPIO_N_INT_MASK = ~Enable; - } + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + GPIO->GPIO_INT_MASK = ~Enable; + } else if (Group == GPIO_GROUP_GPIO_H) { + GPIO->GPIO_H_INT_MASK = ~Enable; + } else { + GPIO->GPIO_N_INT_MASK = ~Enable; + } } uint32_t GPIO_GetIntStatus(uint8_t Group) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - return GPIO->GPIO_INT_STATUS; - } else if (Group == GPIO_GROUP_GPIO_H) { - return GPIO->GPIO_H_INT_STATUS; - } - - return GPIO->GPIO_N_INT_STATUS; + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + return GPIO->GPIO_INT_STATUS; + } else if (Group == GPIO_GROUP_GPIO_H) { + return GPIO->GPIO_H_INT_STATUS; + } + + return GPIO->GPIO_N_INT_STATUS; } void GPIO_ClearInt(uint8_t Group, uint32_t Clear) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - GPIO->GPIO_INT_STATUS = Clear; - } else if (Group == GPIO_GROUP_GPIO_H) { - GPIO->GPIO_H_INT_STATUS = Clear; - } else { - GPIO->GPIO_N_INT_STATUS = Clear; - } + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + GPIO->GPIO_INT_STATUS = Clear; + } else if (Group == GPIO_GROUP_GPIO_H) { + GPIO->GPIO_H_INT_STATUS = Clear; + } else { + GPIO->GPIO_N_INT_STATUS = Clear; + } } uint32_t GPIO_Read(uint8_t Group) { uint32_t data; - - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - data = GPIO->GPIO_IN; - } else if (Group == GPIO_GROUP_GPIO_H) { - data = GPIO->GPIO_H_IN; - } else { - data = GPIO->GPIO_N_IN; - } - - return data; + + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + data = GPIO->GPIO_IN; + } else if (Group == GPIO_GROUP_GPIO_H) { + data = GPIO->GPIO_H_IN; + } else { + data = GPIO->GPIO_N_IN; + } + + return data; } void GPIO_Write(uint8_t Group, uint32_t Unmask, uint32_t data) { - assert_param(IS_GPIO_GROUP(Group)); - - if (Group == GPIO_GROUP_GPIO) { - GPIO->GPIO_OUT_UNMASK = Unmask; - GPIO->GPIO_OUT_DATA = data; - } else if (Group == GPIO_GROUP_GPIO_H) { - GPIO->GPIO_H_OUT_UNMASK = Unmask; - GPIO->GPIO_H_OUT_DATA = data; - } else { - GPIO->GPIO_N_OUT_UNMASK = Unmask; - GPIO->GPIO_N_OUT_DATA = data; - } + assert_param(IS_GPIO_GROUP(Group)); + + if (Group == GPIO_GROUP_GPIO) { + GPIO->GPIO_OUT_UNMASK = Unmask; + GPIO->GPIO_OUT_DATA = data; + } else if (Group == GPIO_GROUP_GPIO_H) { + GPIO->GPIO_H_OUT_UNMASK = Unmask; + GPIO->GPIO_H_OUT_DATA = data; + } else { + GPIO->GPIO_N_OUT_UNMASK = Unmask; + GPIO->GPIO_N_OUT_DATA = data; + } } void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLevelNanoSecond) { - uint16_t lowTick, highTick; - - assert_param(IS_GPIO_PWM_CHANNEL(Channel)); - - lowTick = LowLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000; - highTick = HighLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000; - lowTick = (lowTick < 1) ? lowTick : lowTick - 1; - highTick = (highTick < 1) ? highTick : highTick - 1; - - if (Channel == GPIO_PWM_CHANNEL_GPIO_31) { - GPIO->PWM_OUT0_LEN_b.LOW_LEVEL_TICK = lowTick; - GPIO->PWM_OUT0_LEN_b.HIGH_LEVEL_TICK = highTick; - } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) { - GPIO->PWM_OUT1_LEN_b.LOW_LEVEL_TICK = lowTick; - GPIO->PWM_OUT1_LEN_b.HIGH_LEVEL_TICK = highTick; - } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) { - GPIO->PWM_OUT2_LEN_b.LOW_LEVEL_TICK = lowTick; - GPIO->PWM_OUT2_LEN_b.HIGH_LEVEL_TICK = highTick; + uint16_t lowTick, highTick; + + assert_param(IS_GPIO_PWM_CHANNEL(Channel)); + + lowTick = LowLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000; + highTick = HighLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000; + lowTick = (lowTick < 1) ? lowTick : lowTick - 1; + highTick = (highTick < 1) ? highTick : highTick - 1; + + if (Channel == GPIO_PWM_CHANNEL_GPIO_31) { + GPIO->PWM_OUT0_LEN_b.LOW_LEVEL_TICK = lowTick; + GPIO->PWM_OUT0_LEN_b.HIGH_LEVEL_TICK = highTick; + } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) { + GPIO->PWM_OUT1_LEN_b.LOW_LEVEL_TICK = lowTick; + GPIO->PWM_OUT1_LEN_b.HIGH_LEVEL_TICK = highTick; + } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) { + GPIO->PWM_OUT2_LEN_b.LOW_LEVEL_TICK = lowTick; + GPIO->PWM_OUT2_LEN_b.HIGH_LEVEL_TICK = highTick; } else { - GPIO->PWM_OUT3_LEN_b.LOW_LEVEL_TICK = lowTick; - GPIO->PWM_OUT3_LEN_b.HIGH_LEVEL_TICK = highTick; - } + GPIO->PWM_OUT3_LEN_b.LOW_LEVEL_TICK = lowTick; + GPIO->PWM_OUT3_LEN_b.HIGH_LEVEL_TICK = highTick; + } } void GPIO_EnablePwm(uint8_t Channel, BOOL Enable) { - assert_param(IS_GPIO_PWM_CHANNEL(Channel)); - - if (Channel == GPIO_PWM_CHANNEL_GPIO_31) { - GPIO->PWM_OUT_EN_b.GPIO_31 = Enable; - GPIO->PWM_OUT_SEL_b.GPIO_31 = Enable; - } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) { - GPIO->PWM_OUT_EN_b.GPIO_H_9 = Enable; - GPIO->PWM_OUT_SEL_b.GPIO_H_9 = Enable; - } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) { - GPIO->PWM_OUT_EN_b.GPIO_H_19 = Enable; - GPIO->PWM_OUT_SEL_b.GPIO_H_19 = Enable; + assert_param(IS_GPIO_PWM_CHANNEL(Channel)); + + if (Channel == GPIO_PWM_CHANNEL_GPIO_31) { + GPIO->PWM_OUT_EN_b.GPIO_31 = Enable; + GPIO->PWM_OUT_SEL_b.GPIO_31 = Enable; + } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) { + GPIO->PWM_OUT_EN_b.GPIO_H_9 = Enable; + GPIO->PWM_OUT_SEL_b.GPIO_H_9 = Enable; + } else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) { + GPIO->PWM_OUT_EN_b.GPIO_H_19 = Enable; + GPIO->PWM_OUT_SEL_b.GPIO_H_19 = Enable; } else { - GPIO->PWM_OUT_EN_b.GPIO_H_20 = Enable; - GPIO->PWM_OUT_SEL_b.GPIO_H_20 = Enable; - } + GPIO->PWM_OUT_EN_b.GPIO_H_20 = Enable; + GPIO->PWM_OUT_SEL_b.GPIO_H_20 = Enable; + } } /** xjf 20150324 - + **/ void GPIO_SetBits(uint32_t mask) { static uint32_t g_GPIO_OUT_UNMASK; static uint32_t g_GPIO_OUT_DATA; static uint32_t g_GPIO_OE; - - g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; g_GPIO_OUT_DATA = GPIO->GPIO_OUT_DATA ; - g_GPIO_OE = GPIO->GPIO_OE ; - g_GPIO_OUT_UNMASK |=mask; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK |=mask; g_GPIO_OE |=mask; - g_GPIO_OUT_DATA |=mask; - - GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + g_GPIO_OUT_DATA |=mask; + + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; GPIO->GPIO_OUT_DATA =g_GPIO_OUT_DATA ; - GPIO->GPIO_OE =g_GPIO_OE ; + GPIO->GPIO_OE =g_GPIO_OE ; } void GPIO_clrBits(uint32_t mask) @@ -206,17 +206,17 @@ void GPIO_clrBits(uint32_t mask) static uint32_t g_GPIO_OUT_UNMASK; static uint32_t g_GPIO_OUT_DATA; static uint32_t g_GPIO_OE; - - g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; g_GPIO_OUT_DATA = GPIO->GPIO_OUT_DATA ; - g_GPIO_OE = GPIO->GPIO_OE ; - g_GPIO_OUT_UNMASK |=mask; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK |=mask; g_GPIO_OE |=mask; - g_GPIO_OUT_DATA &=(~ mask); - - GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + g_GPIO_OUT_DATA &=(~ mask); + + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; GPIO->GPIO_OUT_DATA =g_GPIO_OUT_DATA ; - GPIO->GPIO_OE =g_GPIO_OE ; + GPIO->GPIO_OE =g_GPIO_OE ; } uint32_t GPIO_getBits(uint32_t mask) @@ -224,33 +224,33 @@ uint32_t GPIO_getBits(uint32_t mask) static uint32_t g_GPIO_OUT_UNMASK; //static uint32_t g_GPIO_OUT_DATA; static uint32_t g_GPIO_OE; - - uint32_t get_delay = 0; - uint32_t saved_mask; - - saved_mask=mask; - - g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; - g_GPIO_OE = GPIO->GPIO_OE ; - g_GPIO_OUT_UNMASK &=(~mask); + + uint32_t get_delay = 0; + uint32_t saved_mask; + + saved_mask=mask; + + g_GPIO_OUT_UNMASK = GPIO->GPIO_OUT_UNMASK ; + g_GPIO_OE = GPIO->GPIO_OE ; + g_GPIO_OUT_UNMASK &=(~mask); g_GPIO_OE &=(~mask); - GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; - GPIO->GPIO_OE =g_GPIO_OE ; - for(get_delay=0;get_delay<100;get_delay++) - { + GPIO->GPIO_OUT_UNMASK =g_GPIO_OUT_UNMASK ; + GPIO->GPIO_OE =g_GPIO_OE ; + for(get_delay=0;get_delay<100;get_delay++) + { } - //get_delay=(GPIO->GPIO_IN)&saved_mask; - if(((GPIO->GPIO_IN)&saved_mask)==saved_mask) - { - return(1); - } - else - { - return(0); + //get_delay=(GPIO->GPIO_IN)&saved_mask; + if(((GPIO->GPIO_IN)&saved_mask)==saved_mask) + { + return(1); + } + else + { + return(0); } - + } /** xjf 20150324 - + **/ diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_i2c.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_i2c.c index ebce3cb48d..8d60b9ffe4 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_i2c.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_i2c.c @@ -1,322 +1,322 @@ /** - ***************************************************************************** - * @file cmem7_i2c.c - * - * @brief CMEM7 I2C source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_i2c.c + * + * @brief CMEM7 I2C source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_i2c.h" -#define I2C_INNER_INT_ALL 0x3FF +#define I2C_INNER_INT_ALL 0x3FF typedef struct { - union { - uint32_t DATA_CMD; - + union { + uint32_t DATA_CMD; + struct { - uint32_t DATA : 8; - uint32_t RD_CMD : 1; - uint32_t WR_CMD : 1; - uint32_t WR_RD_CMD : 1; - } DATA_CMD_b; + uint32_t DATA : 8; + uint32_t RD_CMD : 1; + uint32_t WR_CMD : 1; + uint32_t WR_RD_CMD : 1; + } DATA_CMD_b; } INNER; } I2C_INNER_DATA_CMD; static uint32_t i2c_GetClock(I2C0_Type* I2Cx) { - uint32_t dividor; - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + uint32_t dividor; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if ((uint32_t)I2Cx == (uint32_t)I2C0) { + dividor = GLOBAL_CTRL->CLK_SEL_0_b.I2C0_CLK; + } else if ((uint32_t)I2Cx == (uint32_t)I2C1) { + dividor = GLOBAL_CTRL->CLK_SEL_0_b.I2C1_CLK; + } - if ((uint32_t)I2Cx == (uint32_t)I2C0) { - dividor = GLOBAL_CTRL->CLK_SEL_0_b.I2C0_CLK; - } else if ((uint32_t)I2Cx == (uint32_t)I2C1) { - dividor = GLOBAL_CTRL->CLK_SEL_0_b.I2C1_CLK; - } - - return SYSTEM_CLOCK_FREQ / (1 << (dividor + 1)); + return SYSTEM_CLOCK_FREQ / (1 << (dividor + 1)); } static uint16_t i2c_NormalizeAddr(I2C0_Type* I2Cx, uint16_t addr) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - if (I2Cx->CTRL_b.MODE == I2C_Mode_Master) { - if (I2Cx->CTRL_b.MASTER_ADDR_WIDTH == I2C_ADDR_WIDTH_7BIT) { - addr &= 0x007F; - } else { - addr &= 0x3FF; - } - } - - if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { - if (I2Cx->CTRL_b.SLAVE_ADDR_WIDTH == I2C_ADDR_WIDTH_7BIT) { - addr &= 0x007F; - } else { - addr &= 0x3FF; - } - } - - return addr; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (I2Cx->CTRL_b.MODE == I2C_Mode_Master) { + if (I2Cx->CTRL_b.MASTER_ADDR_WIDTH == I2C_ADDR_WIDTH_7BIT) { + addr &= 0x007F; + } else { + addr &= 0x3FF; + } + } + + if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { + if (I2Cx->CTRL_b.SLAVE_ADDR_WIDTH == I2C_ADDR_WIDTH_7BIT) { + addr &= 0x007F; + } else { + addr &= 0x3FF; + } + } + + return addr; } static void i2c_ReadClear(uint32_t bit) { - uint32_t tmp; - tmp = bit; - tmp = tmp; + uint32_t tmp; + tmp = bit; + tmp = tmp; } - + void I2C_Init(I2C0_Type* I2Cx, I2C_InitTypeDef* I2C_Init) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(I2C_Init); - assert_param(IS_I2C_MODE(I2C_Init->I2C_Mode)); - assert_param(IS_I2C_ADDR_WIDTH(I2C_Init->I2C_AddressWidth)); - - // reset - I2Cx->ENABLE_b.RESET = FALSE; - I2Cx->ENABLE_b.RESET = TRUE; - - // clear interrupt - I2Cx->INT_MASK = I2C_INNER_INT_ALL; - i2c_ReadClear(I2Cx->CLR_ALL_INT_b.CLEAR); - - I2Cx->CTRL_b.MODE = I2C_Init->I2C_Mode; - if (I2Cx->CTRL_b.MODE == I2C_Mode_Master) { - I2Cx->CTRL_b.MASTER_ADDR_WIDTH = I2C_Init->I2C_AddressWidth; - I2Cx->TAR_b.START_BYTE = TRUE; - I2Cx->TAR_b.ADDR10 = i2c_NormalizeAddr(I2Cx, I2C_Init->I2C_Address); - } - if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { - I2Cx->CTRL_b.SLAVE_ADDR_WIDTH = I2C_Init->I2C_AddressWidth; - I2Cx->SAR_b.ADDR10 = i2c_NormalizeAddr(I2Cx, I2C_Init->I2C_Address); - } - - I2Cx->RX_TL_b.THRESHOLD = 0; - I2Cx->TX_TL_b.THRESHOLD = 0; - - I2Cx->SLAVE_NACK_b.NACK = FALSE; - - if (I2C_Init->timing) { - I2Cx->SCL_CNT_b.HIGH_LEVEL_TICK = - i2c_GetClock(I2Cx) / I2C_Init->timing->I2C_Freq / 2; - I2Cx->SCL_CNT_b.LOW_LEVEL_TICK = - i2c_GetClock(I2Cx) / I2C_Init->timing->I2C_Freq / 2; - I2Cx->SDA_SETUP_b.TSU_DAT = ((uint64_t)I2C_Init->timing->I2C_TsuDat) * - i2c_GetClock(I2Cx) / 1000000000; - I2Cx->SDA_SETUP_b.TSETUP = ((uint64_t)I2C_Init->timing->I2C_Tsetup) * - i2c_GetClock(I2Cx) / 1000000000; - I2Cx->TSU_STA_SETUP_b.TBUF = ((uint64_t)I2C_Init->timing->I2C_Tbuf) * - i2c_GetClock(I2Cx) / 1000000000; - I2Cx->TSU_STA_SETUP_b.TSU_STA = ((uint64_t)I2C_Init->timing->I2C_TsuSta) * - i2c_GetClock(I2Cx) / 1000000000; - I2Cx->TSU_STA_SETUP_b.SDA_FILTER_EN = I2C_Init->timing->I2C_SdaFilterEn; - I2Cx->TSU_STA_SETUP_b.SDA_FILTER_CNT = I2C_Init->timing->I2C_SdaFilterSpike; - I2Cx->TSU_STA_SETUP_b.SCL_FILTER_EN = I2C_Init->timing->I2C_SclFilterEn; - I2Cx->TSU_STA_SETUP_b.SCL_FILTER_CNT = I2C_Init->timing->I2C_SclFilterSpike; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(I2C_Init); + assert_param(IS_I2C_MODE(I2C_Init->I2C_Mode)); + assert_param(IS_I2C_ADDR_WIDTH(I2C_Init->I2C_AddressWidth)); + + // reset + I2Cx->ENABLE_b.RESET = FALSE; + I2Cx->ENABLE_b.RESET = TRUE; + + // clear interrupt + I2Cx->INT_MASK = I2C_INNER_INT_ALL; + i2c_ReadClear(I2Cx->CLR_ALL_INT_b.CLEAR); + + I2Cx->CTRL_b.MODE = I2C_Init->I2C_Mode; + if (I2Cx->CTRL_b.MODE == I2C_Mode_Master) { + I2Cx->CTRL_b.MASTER_ADDR_WIDTH = I2C_Init->I2C_AddressWidth; + I2Cx->TAR_b.START_BYTE = TRUE; + I2Cx->TAR_b.ADDR10 = i2c_NormalizeAddr(I2Cx, I2C_Init->I2C_Address); + } + if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { + I2Cx->CTRL_b.SLAVE_ADDR_WIDTH = I2C_Init->I2C_AddressWidth; + I2Cx->SAR_b.ADDR10 = i2c_NormalizeAddr(I2Cx, I2C_Init->I2C_Address); + } + + I2Cx->RX_TL_b.THRESHOLD = 0; + I2Cx->TX_TL_b.THRESHOLD = 0; + + I2Cx->SLAVE_NACK_b.NACK = FALSE; + + if (I2C_Init->timing) { + I2Cx->SCL_CNT_b.HIGH_LEVEL_TICK = + i2c_GetClock(I2Cx) / I2C_Init->timing->I2C_Freq / 2; + I2Cx->SCL_CNT_b.LOW_LEVEL_TICK = + i2c_GetClock(I2Cx) / I2C_Init->timing->I2C_Freq / 2; + I2Cx->SDA_SETUP_b.TSU_DAT = ((uint64_t)I2C_Init->timing->I2C_TsuDat) * + i2c_GetClock(I2Cx) / 1000000000; + I2Cx->SDA_SETUP_b.TSETUP = ((uint64_t)I2C_Init->timing->I2C_Tsetup) * + i2c_GetClock(I2Cx) / 1000000000; + I2Cx->TSU_STA_SETUP_b.TBUF = ((uint64_t)I2C_Init->timing->I2C_Tbuf) * + i2c_GetClock(I2Cx) / 1000000000; + I2Cx->TSU_STA_SETUP_b.TSU_STA = ((uint64_t)I2C_Init->timing->I2C_TsuSta) * + i2c_GetClock(I2Cx) / 1000000000; + I2Cx->TSU_STA_SETUP_b.SDA_FILTER_EN = I2C_Init->timing->I2C_SdaFilterEn; + I2Cx->TSU_STA_SETUP_b.SDA_FILTER_CNT = I2C_Init->timing->I2C_SdaFilterSpike; + I2Cx->TSU_STA_SETUP_b.SCL_FILTER_EN = I2C_Init->timing->I2C_SclFilterEn; + I2Cx->TSU_STA_SETUP_b.SCL_FILTER_CNT = I2C_Init->timing->I2C_SclFilterSpike; } } void I2C_Enable(I2C0_Type* I2Cx, BOOL enable) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - I2Cx->ENABLE_b.EN = enable; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + I2Cx->ENABLE_b.EN = enable; } void I2C_EnableInt(I2C0_Type* I2Cx, uint32_t Int, BOOL enable) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_INT(Int)); - - if (enable) { - I2Cx->INT_MASK &= ~Int; - } else { - I2Cx->INT_MASK |= Int; - } + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_INT(Int)); + + if (enable) { + I2Cx->INT_MASK &= ~Int; + } else { + I2Cx->INT_MASK |= Int; + } } BOOL I2C_GetIntStatus(I2C0_Type* I2Cx, uint32_t Int) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_INT(Int)); - - if (0 != (I2Cx->INT_STATUS & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_INT(Int)); + + if (0 != (I2Cx->INT_STATUS & Int)) { + return TRUE; + } + + return FALSE; } void I2C_ClearInt(I2C0_Type* I2Cx, uint32_t Int) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_INT(Int)); - - if (Int == I2C_INT_RX_FIFO_NOT_EMPTY) { - // It can't be clear by sw but read data - } - - if (Int == I2C_INT_RD_REQUEST) { - i2c_ReadClear(I2Cx->CLR_RD_REQ_b.CLEAR); - } - - if (Int == I2C_INT_TX_ABORT) { - i2c_ReadClear(I2Cx->CLR_TX_ABRT_b.CLEAR); - } - - if (Int == I2C_INT_RX_DONE) { - i2c_ReadClear(I2Cx->CLR_RX_DONE_b.CLEAR); - } - - if (Int == I2C_INT_TX_DONE) { - i2c_ReadClear(I2Cx->CLR_TX_DONE_b.CLEAR); - } + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_INT(Int)); + + if (Int == I2C_INT_RX_FIFO_NOT_EMPTY) { + // It can't be clear by sw but read data + } + + if (Int == I2C_INT_RD_REQUEST) { + i2c_ReadClear(I2Cx->CLR_RD_REQ_b.CLEAR); + } + + if (Int == I2C_INT_TX_ABORT) { + i2c_ReadClear(I2Cx->CLR_TX_ABRT_b.CLEAR); + } + + if (Int == I2C_INT_RX_DONE) { + i2c_ReadClear(I2Cx->CLR_RX_DONE_b.CLEAR); + } + + if (Int == I2C_INT_TX_DONE) { + i2c_ReadClear(I2Cx->CLR_TX_DONE_b.CLEAR); + } } BOOL I2C_GetStatus(I2C0_Type* I2Cx, uint32_t Status) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_STATUS(Status)); - - if (0 != (I2Cx->STATUS & Status)) { - return TRUE; - } - - return FALSE; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_STATUS(Status)); + + if (0 != (I2Cx->STATUS & Status)) { + return TRUE; + } + + return FALSE; } void I2C_ClearStatus(I2C0_Type* I2Cx, uint32_t Status) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_STATUS(Status)); - - if (Status & I2C_STATUS_RX_FIFO_NOT_EMPTY) { - // It can't be clear by sw but read - } - - if (Status & I2C_STATUS_RD_REQUEST) { - i2c_ReadClear(I2Cx->CLR_RD_REQ_b.CLEAR); - } - - if (Status & I2C_STATUS_TX_ABORT) { - i2c_ReadClear(I2Cx->CLR_TX_ABRT_b.CLEAR); - } - - if (Status & I2C_STATUS_RX_DONE) { - i2c_ReadClear(I2Cx->CLR_RX_DONE_b.CLEAR); - } - - if (Status & I2C_STATUS_TX_DONE) { - i2c_ReadClear(I2Cx->CLR_TX_DONE_b.CLEAR); - } + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_STATUS(Status)); + + if (Status & I2C_STATUS_RX_FIFO_NOT_EMPTY) { + // It can't be clear by sw but read + } + + if (Status & I2C_STATUS_RD_REQUEST) { + i2c_ReadClear(I2Cx->CLR_RD_REQ_b.CLEAR); + } + + if (Status & I2C_STATUS_TX_ABORT) { + i2c_ReadClear(I2Cx->CLR_TX_ABRT_b.CLEAR); + } + + if (Status & I2C_STATUS_RX_DONE) { + i2c_ReadClear(I2Cx->CLR_RX_DONE_b.CLEAR); + } + + if (Status & I2C_STATUS_TX_DONE) { + i2c_ReadClear(I2Cx->CLR_TX_DONE_b.CLEAR); + } } BOOL I2C_MasterReadReq(I2C0_Type* I2Cx, uint8_t size) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - if (!I2Cx->ENABLE_b.EN || I2Cx->STATUS_b.BUSY) { - return FALSE; - } + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (!I2Cx->ENABLE_b.EN || I2Cx->STATUS_b.BUSY) { + return FALSE; + } - if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { - return FALSE; - } - - if (size == 0) { - return FALSE; - } - - I2Cx->WRITE_READ_CNT_b.RD_BYTE_CNT = size; - if (size != 0) { + if (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) { + return FALSE; + } + + if (size == 0) { + return FALSE; + } + + I2Cx->WRITE_READ_CNT_b.RD_BYTE_CNT = size; + if (size != 0) { I2C_INNER_DATA_CMD inner; - + inner.INNER.DATA_CMD_b.DATA = 0; - inner.INNER.DATA_CMD_b.RD_CMD = TRUE; - inner.INNER.DATA_CMD_b.WR_CMD = FALSE; - inner.INNER.DATA_CMD_b.WR_RD_CMD = FALSE; - - I2Cx->DATA_CMD = inner.INNER.DATA_CMD; - } - - return TRUE; + inner.INNER.DATA_CMD_b.RD_CMD = TRUE; + inner.INNER.DATA_CMD_b.WR_CMD = FALSE; + inner.INNER.DATA_CMD_b.WR_RD_CMD = FALSE; + + I2Cx->DATA_CMD = inner.INNER.DATA_CMD; + } + + return TRUE; } uint8_t I2C_ReadFifo(I2C0_Type* I2Cx, uint8_t size, uint8_t* data) { - uint8_t count; - - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(data); - - if (!I2Cx->ENABLE_b.EN) { - return 0; - } - - count = 0; - while (I2Cx->STATUS_b.RX_FIFO_NOT_EMPTY && count < size) { - *(data + count++) = I2Cx->DATA_CMD_b.DATA; - } - - return count; + uint8_t count; + + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(data); + + if (!I2Cx->ENABLE_b.EN) { + return 0; + } + + count = 0; + while (I2Cx->STATUS_b.RX_FIFO_NOT_EMPTY && count < size) { + *(data + count++) = I2Cx->DATA_CMD_b.DATA; + } + + return count; } BOOL I2C_WriteReq(I2C0_Type* I2Cx, uint8_t size, uint8_t firstData) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - if (!I2Cx->ENABLE_b.EN || I2Cx->STATUS_b.BUSY) { - return FALSE; - } - - if (size == 0) { - return FALSE; - } - - I2Cx->WRITE_READ_CNT_b.WR_BYTE_CNT = size; - if (size != 0) { + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (!I2Cx->ENABLE_b.EN || I2Cx->STATUS_b.BUSY) { + return FALSE; + } + + if (size == 0) { + return FALSE; + } + + I2Cx->WRITE_READ_CNT_b.WR_BYTE_CNT = size; + if (size != 0) { I2C_INNER_DATA_CMD inner; - - inner.INNER.DATA_CMD_b.DATA = firstData ; - inner.INNER.DATA_CMD_b.RD_CMD = FALSE; - inner.INNER.DATA_CMD_b.WR_CMD = - (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) ? FALSE : TRUE; - inner.INNER.DATA_CMD_b.WR_RD_CMD = FALSE; - I2Cx->DATA_CMD = inner.INNER.DATA_CMD; - } + inner.INNER.DATA_CMD_b.DATA = firstData ; + inner.INNER.DATA_CMD_b.RD_CMD = FALSE; + inner.INNER.DATA_CMD_b.WR_CMD = + (I2Cx->CTRL_b.MODE == I2C_Mode_Slave) ? FALSE : TRUE; + inner.INNER.DATA_CMD_b.WR_RD_CMD = FALSE; - return TRUE; + I2Cx->DATA_CMD = inner.INNER.DATA_CMD; + } + + return TRUE; } uint8_t I2C_WriteFifo(I2C0_Type* I2Cx, uint8_t size, uint8_t* data) { - uint8_t count; - - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(data); - - if (!I2Cx->ENABLE_b.EN) { - return 0; - } + uint8_t count; + + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(data); + + if (!I2Cx->ENABLE_b.EN) { + return 0; + } - count = 0; - while (I2Cx->STATUS_b.TX_FIFO_NOT_FULL && count < size) { - I2Cx->DATA_CMD_b.DATA = *(data + count++); - } - - return count; + count = 0; + while (I2Cx->STATUS_b.TX_FIFO_NOT_FULL && count < size) { + I2Cx->DATA_CMD_b.DATA = *(data + count++); + } + + return count; } BOOL I2C_StopReq(I2C0_Type* I2Cx) { - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - udelay(600); - - return TRUE; + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + udelay(600); + + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c index 9f4151fa85..60b6183e29 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_misc.c - * - * @brief CMEM7 miscellaneous file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_misc.c + * + * @brief CMEM7 miscellaneous file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #include "cmem7_misc.h" @@ -32,7 +32,7 @@ void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) { /* Check the parameters */ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; } @@ -40,14 +40,14 @@ void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) { uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; - + /* Check the parameters */ - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - + if (NVIC_InitStruct->NVIC_IRQChannelCmd != FALSE) { - /* Compute the Corresponding IRQ Priority --------------------------------*/ + /* Compute the Corresponding IRQ Priority --------------------------------*/ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; tmppre = (0x4 - tmppriority); tmpsub = tmpsub >> tmppriority; @@ -55,9 +55,9 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; tmppriority = tmppriority << 0x04; - + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; - + /* Enable the Selected IRQ Channels --------------------------------------*/ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); @@ -71,11 +71,11 @@ void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) } void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) -{ +{ /* Check the parameters */ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - + assert_param(IS_NVIC_OFFSET(Offset)); + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); } @@ -83,20 +83,20 @@ void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState) { /* Check the parameters */ assert_param(IS_NVIC_LP(LowPowerMode)); - + if (!NewState) { SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); } else { - SCB->SCR |= LowPowerMode; - } + SCB->SCR |= LowPowerMode; + } } #define DEF_IBUS_OFFSET 0x1FFE0000 #define DEF_EXT_ADDR 0x08020000 static BOOL isMappingOn() { /* If default values aren't changed */ - if ((GLOBAL_CTRL->IBUSOFF == DEF_IBUS_OFFSET) && + if ((GLOBAL_CTRL->IBUSOFF == DEF_IBUS_OFFSET) && (GLOBAL_CTRL->EXTADDR == DEF_EXT_ADDR)) { return FALSE; } @@ -105,15 +105,15 @@ static BOOL isMappingOn() { } void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn) { - volatile int n; - - GLOBAL_CTRL->IBUSOFF = GLOBAL_CTRL->DBUSOFF = (from - to); - GLOBAL_CTRL->EXTADDR = to; - - // Delay several cycles - for (n = 0; n < 100; n++); - GLOBAL_CTRL->ICACHE_b.EN = isIcacheOn; - for (n = 0; n < 100; n++); + volatile int n; + + GLOBAL_CTRL->IBUSOFF = GLOBAL_CTRL->DBUSOFF = (from - to); + GLOBAL_CTRL->EXTADDR = to; + + // Delay several cycles + for (n = 0; n < 100; n++); + GLOBAL_CTRL->ICACHE_b.EN = isIcacheOn; + for (n = 0; n < 100; n++); } /* @@ -128,11 +128,11 @@ uint32_t GLB_ConvertToMappingFromAddr(uint32_t to) { if (!isMappingOn()) { return to; } - + if ((to > MAPPING_TO_REGION_END) || (to < GLOBAL_CTRL->EXTADDR)) { return to; } - + return (to + GLOBAL_CTRL->IBUSOFF); } @@ -140,44 +140,44 @@ uint32_t GLB_ConvertToMappingToAddr(uint32_t from) { if (!isMappingOn()) { return from; } - + if (from < MAPPING_FROM_REGION_START) { return from; } - + return (from - GLOBAL_CTRL->IBUSOFF); } void GLB_SetNmiIrqNum(uint32_t irq) { - GLOBAL_CTRL->NMI_SEL_b.NMI = irq; + GLOBAL_CTRL->NMI_SEL_b.NMI = irq; } void GLB_SelectSysClkSource(uint8_t source) { - switch (source) { - case SYS_CLK_SEL_DLL : - // M7's DLL clock should be fixed at PLL loation 2 - // In constrast, it's C2R1. - // Wait DLL clock stable - while (PDLOCK->GCLK_b.C2R1D == 0) ; - GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_DLL; - break; - case SYS_CLK_SEL_CRYSTAL : - GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_CRYSTAL; - break; - case SYS_CLK_SEL_EXTERNAL : - // TODO, Add the condition that makes sure input - // external clock is stable - // For example : - // PLL location 0 - // while (PDLOCK->GCLK_b.C1R1P == 0) ; - // DLL location 0 - // while (PDLOCK->GCLK_b.C1R1D == 0) ; - GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_EXTERNAL; - break; - case SYS_CLK_SEL_OSC : - // Fall through - default : - GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_OSC; - break; - } + switch (source) { + case SYS_CLK_SEL_DLL : + // M7's DLL clock should be fixed at PLL loation 2 + // In constrast, it's C2R1. + // Wait DLL clock stable + while (PDLOCK->GCLK_b.C2R1D == 0) ; + GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_DLL; + break; + case SYS_CLK_SEL_CRYSTAL : + GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_CRYSTAL; + break; + case SYS_CLK_SEL_EXTERNAL : + // TODO, Add the condition that makes sure input + // external clock is stable + // For example : + // PLL location 0 + // while (PDLOCK->GCLK_b.C1R1P == 0) ; + // DLL location 0 + // while (PDLOCK->GCLK_b.C1R1D == 0) ; + GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_EXTERNAL; + break; + case SYS_CLK_SEL_OSC : + // Fall through + default : + GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_OSC; + break; + } } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c index aec1580ad9..9932e16deb 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c @@ -1,63 +1,63 @@ /** - ***************************************************************************** - * @file cmem7_rtc.c - * - * @brief CMEM7 RTC source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_rtc.c + * + * @brief CMEM7 RTC source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_rtc.h" #define SECONDS_IN_A_DAY (86400) void RTC_ITConfig(uint32_t Int, BOOL Enable) { - assert_param(IS_RTC_INT(Int)); - - if (Enable) { - GLOBAL_CTRL->RTC_INT_EN |= Int; - } else { - GLOBAL_CTRL->RTC_INT_EN &= ~Int; - } + assert_param(IS_RTC_INT(Int)); + + if (Enable) { + GLOBAL_CTRL->RTC_INT_EN |= Int; + } else { + GLOBAL_CTRL->RTC_INT_EN &= ~Int; + } } BOOL RTC_GetITStatus(uint32_t Int) { - assert_param(IS_RTC_INT(Int)); - - if (0 != (RTC->INT_STATUS & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_RTC_INT(Int)); + + if (0 != (RTC->INT_STATUS & Int)) { + return TRUE; + } + + return FALSE; } void RTC_ClearITPendingBit(uint32_t Int) { - assert_param(IS_RTC_INT(Int)); - - RTC->INT_STATUS = Int; + assert_param(IS_RTC_INT(Int)); + + RTC->INT_STATUS = Int; } uint32_t RTC_GetSecond() { - return RTC->SECOND; + return RTC->SECOND; } uint16_t RTC_GetMillSecond() { - return RTC->MILLSECOND_b.MS; + return RTC->MILLSECOND_b.MS; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_spi.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_spi.c index fe673c75f3..008af46ff3 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_spi.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_spi.c @@ -1,145 +1,145 @@ /** - ***************************************************************************** - * @file cmem7_spi.c - * - * @brief CMEM7 SPI source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_spi.c + * + * @brief CMEM7 SPI source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_spi.h" void SPI_Init(SPI0_Type* SPIx, SPI_InitTypeDef *init) { - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(init); - assert_param(IS_SPI_MODE(init->SPI_Mode)); - assert_param(init->SPI_BitLength != 0); - - if (init->SPI_Mode == SPI_MODE_CPOL_0_CPHA_0) { - SPIx->CTRL_b.CLK_HIGH = FALSE; - SPIx->CTRL_b.NEG_EDGE = TRUE; + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(init); + assert_param(IS_SPI_MODE(init->SPI_Mode)); + assert_param(init->SPI_BitLength != 0); + + if (init->SPI_Mode == SPI_MODE_CPOL_0_CPHA_0) { + SPIx->CTRL_b.CLK_HIGH = FALSE; + SPIx->CTRL_b.NEG_EDGE = TRUE; } else if (init->SPI_Mode == SPI_MODE_CPOL_0_CPHA_1) { - SPIx->CTRL_b.CLK_HIGH = FALSE; - SPIx->CTRL_b.NEG_EDGE = FALSE; + SPIx->CTRL_b.CLK_HIGH = FALSE; + SPIx->CTRL_b.NEG_EDGE = FALSE; } else if (init->SPI_Mode == SPI_MODE_CPOL_1_CPHA_0) { - SPIx->CTRL_b.CLK_HIGH = TRUE; - SPIx->CTRL_b.NEG_EDGE = FALSE; + SPIx->CTRL_b.CLK_HIGH = TRUE; + SPIx->CTRL_b.NEG_EDGE = FALSE; } else { - SPIx->CTRL_b.CLK_HIGH = TRUE; - SPIx->CTRL_b.NEG_EDGE = TRUE; - } + SPIx->CTRL_b.CLK_HIGH = TRUE; + SPIx->CTRL_b.NEG_EDGE = TRUE; + } - SPIx->CTRL_b.RX_EN = init->SPI_RxEn; - SPIx->BCNT_b.CNT = init->SPI_BitLength - 1; - SPIx->DIV = init->SPI_ClockDividor; - SPIx->GAP = (init->SPI_Gap == 0) ? 0 : init->SPI_Gap / 2 + 1; + SPIx->CTRL_b.RX_EN = init->SPI_RxEn; + SPIx->BCNT_b.CNT = init->SPI_BitLength - 1; + SPIx->DIV = init->SPI_ClockDividor; + SPIx->GAP = (init->SPI_Gap == 0) ? 0 : init->SPI_Gap / 2 + 1; } void SPI_Enable(SPI0_Type* SPIx, BOOL enable) { - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + SPIx->CTRL_b.EN = enable; } void SPI_EnableInt(SPI0_Type* SPIx, uint32_t Int, BOOL enable) { assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_INT(Int)); - + assert_param(IS_SPI_INT(Int)); + if (enable) { - SPIx->INT_MASK &= ~Int; - } else { - SPIx->INT_MASK |= Int; - } - - SPIx->INT_MASK &= SPI_INT_ALL; + SPIx->INT_MASK &= ~Int; + } else { + SPIx->INT_MASK |= Int; + } + + SPIx->INT_MASK &= SPI_INT_ALL; } BOOL SPI_GetIntStatus(SPI0_Type* SPIx, uint32_t Int) { - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_INT(Int)); - - if (0 != (SPIx->INT_STATUS & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_INT(Int)); + + if (0 != (SPIx->INT_STATUS & Int)) { + return TRUE; + } + + return FALSE; } void SPI_ClearInt(SPI0_Type* SPIx, uint32_t Int) { - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_INT(Int)); - - SPIx->INT_STATUS = Int; + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_INT(Int)); + + SPIx->INT_STATUS = Int; } uint8_t SPI_ReadFifo(SPI0_Type* SPIx, uint8_t size, uint32_t* data) { - uint8_t count; - - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(data); - - if (!SPIx->CTRL_b.EN) { - return 0; - } - - count = 0; - while (!SPIx->STATUS_b.RFIFO_EMPTY && count < size) { - uint32_t d = SPIx->RW_DATA; - d <<= (32 - SPIx->BCNT_b.CNT - 1); - d >>= (32 - SPIx->BCNT_b.CNT - 1); - *(data + count++) = d; - } - - return count; + uint8_t count; + + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(data); + + if (!SPIx->CTRL_b.EN) { + return 0; + } + + count = 0; + while (!SPIx->STATUS_b.RFIFO_EMPTY && count < size) { + uint32_t d = SPIx->RW_DATA; + d <<= (32 - SPIx->BCNT_b.CNT - 1); + d >>= (32 - SPIx->BCNT_b.CNT - 1); + *(data + count++) = d; + } + + return count; } - + uint8_t SPI_WriteFifo(SPI0_Type* SPIx, uint8_t Size, uint32_t* data) { - uint8_t count; - - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(data); - - if (!SPIx->CTRL_b.EN) { - return 0; - } - - count = 0; - while (!SPIx->STATUS_b.TFIFO_FULL && count < Size) { - uint32_t d = *(data + count++); - d <<= (32 - SPIx->BCNT_b.CNT - 1); - SPIx->RW_DATA = d; - } - - return count; + uint8_t count; + + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(data); + + if (!SPIx->CTRL_b.EN) { + return 0; + } + + count = 0; + while (!SPIx->STATUS_b.TFIFO_FULL && count < Size) { + uint32_t d = *(data + count++); + d <<= (32 - SPIx->BCNT_b.CNT - 1); + SPIx->RW_DATA = d; + } + + return count; } BOOL SPI_Transcation(SPI0_Type* SPIx, uint8_t size) { - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(size); - - if (!SPIx->CTRL_b.EN) { - return FALSE; - } - - SPIx->TRANS_CNT = size - 1; - SPIx->TRANS_START_b.TX_TRIGGER = TRUE; - - return TRUE; + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(size); + + if (!SPIx->CTRL_b.EN) { + return FALSE; + } + + SPIx->TRANS_CNT = size - 1; + SPIx->TRANS_START_b.TX_TRIGGER = TRUE; + + return TRUE; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_tim.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_tim.c index a174b9f663..269478de30 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_tim.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_tim.c @@ -1,80 +1,80 @@ /** - ***************************************************************************** - * @file cmem7_tim.c - * - * @brief CMEM7 timer source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_tim.c + * + * @brief CMEM7 timer source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_tim.h" static uint32_t tim_GetClock() { - return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.TIMER_CLK + 1)); + return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.TIMER_CLK + 1)); } void TIM_Init(TIMER0_Type* Timx, uint16_t Ms) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - Timx->CTRL_b.EN = FALSE; - Timx->LEN = tim_GetClock() / 1000 * Ms; - Timx->TYPE_b.SIGNLE_SHOT = TRUE; + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + Timx->CTRL_b.EN = FALSE; + Timx->LEN = tim_GetClock() / 1000 * Ms; + Timx->TYPE_b.SIGNLE_SHOT = TRUE; } void TIM_EnableInt(TIMER0_Type* Timx, BOOL Enable) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - if (Enable == TRUE) { - Timx->INT_EN_b.EN_REVERSE = FALSE; - } else { - Timx->INT_EN_b.EN_REVERSE = TRUE; - } + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + if (Enable == TRUE) { + Timx->INT_EN_b.EN_REVERSE = FALSE; + } else { + Timx->INT_EN_b.EN_REVERSE = TRUE; + } } BOOL TIM_GetIntStatus(TIMER0_Type* Timx) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - return (Timx->INT_STA_b.STA ? TRUE : FALSE); + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + return (Timx->INT_STA_b.STA ? TRUE : FALSE); } void TIM_ClearInt(TIMER0_Type* Timx) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - Timx->INT_STA_b.STA = 1; + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + Timx->INT_STA_b.STA = 1; } void TIM_Enable(TIMER0_Type* Timx, BOOL Enable) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - Timx->CTRL_b.EN = Enable; + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + Timx->CTRL_b.EN = Enable; } BOOL TIM_IsOverflow(TIMER0_Type* Timx) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - return (Timx->CNT == 0) ? TRUE : FALSE; + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + return (Timx->CNT == 0) ? TRUE : FALSE; } uint32_t TIM_GetCounter(TIMER0_Type* Timx) { - assert_param(IS_TIM_ALL_PERIPH(Timx)); - - return Timx->CNT; + assert_param(IS_TIM_ALL_PERIPH(Timx)); + + return Timx->CNT; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_uart.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_uart.c index ade2ba3e9a..8ddf5bd9f8 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_uart.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_uart.c @@ -1,28 +1,28 @@ /** - ***************************************************************************** - * @file cmem7_uart.c - * - * @brief CMEM7 uart file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ + ***************************************************************************** + * @file cmem7_uart.c + * + * @brief CMEM7 uart file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ #include "cmem7_uart.h" @@ -31,147 +31,147 @@ #define UART_BaudMode_0 0 #define UART_BaudMode_1 1 -#define UART_BaudMode_Division 19200 +#define UART_BaudMode_Division 19200 -#define UART_WR_MAX_FIFO_SIZE 16 +#define UART_WR_MAX_FIFO_SIZE 16 static uint32_t UART_GetClock(UART0_Type* UARTx) { - uint32_t dividor; + uint32_t dividor; - if ((uint32_t)UARTx == (uint32_t)UART0) { - dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART0_CLK; - } else if ((uint32_t)UARTx == (uint32_t)UART1) { - dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART1_CLK; - } else if ((uint32_t)UARTx == (uint32_t)UART2) { - dividor = GLOBAL_CTRL->CLK_SEL_1_b.UART2_CLK; - } - - return SYSTEM_CLOCK_FREQ / (1 << (dividor + 1)); + if ((uint32_t)UARTx == (uint32_t)UART0) { + dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART0_CLK; + } else if ((uint32_t)UARTx == (uint32_t)UART1) { + dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART1_CLK; + } else if ((uint32_t)UARTx == (uint32_t)UART2) { + dividor = GLOBAL_CTRL->CLK_SEL_1_b.UART2_CLK; + } + + return SYSTEM_CLOCK_FREQ / (1 << (dividor + 1)); } static uint16_t UART_CalcBaudrateReload(uint32_t FreqHz, uint32_t Baudrate) { - if (Baudrate <= UART_BaudMode_Division) { - /** reload in mode 0 - * reload = FreqHz / 16 * Baudrate - * round up - * reload = FreqHz / 16 * Baudrate + 1/ 2 - * reload = (2 * FreqHz + 16 * Baudrate) / 2 * 16 * Baudrate - */ - return ((FreqHz << 1) + (Baudrate << 4)) / (Baudrate << 5); - } - - /** reload in mode 1 - * reload = Baudrate * 16 * 65536 / FreqHz - * round up - * reload = Baudrate * 16 * 65536 / FreqHz + 1/ 2 - * reload = (2 * Baudrate * 16 * 65536 + FreqHz) / 2 * FreqHz - */ - return ((((uint64_t)(Baudrate)) << 21) + FreqHz) / (FreqHz << 1); + if (Baudrate <= UART_BaudMode_Division) { + /** reload in mode 0 + * reload = FreqHz / 16 * Baudrate + * round up + * reload = FreqHz / 16 * Baudrate + 1/ 2 + * reload = (2 * FreqHz + 16 * Baudrate) / 2 * 16 * Baudrate + */ + return ((FreqHz << 1) + (Baudrate << 4)) / (Baudrate << 5); + } + + /** reload in mode 1 + * reload = Baudrate * 16 * 65536 / FreqHz + * round up + * reload = Baudrate * 16 * 65536 / FreqHz + 1/ 2 + * reload = (2 * Baudrate * 16 * 65536 + FreqHz) / 2 * FreqHz + */ + return ((((uint64_t)(Baudrate)) << 21) + FreqHz) / (FreqHz << 1); } - + void UART_Init(UART0_Type* UARTx, UART_InitTypeDef *init) { - assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(init); - assert_param(IS_UART_STOPBITS(init->UART_StopBits)); - assert_param(IS_UART_PARITY(init->UART_Parity)); - - /* TODO : assume clock is 50MHz */ - UARTx->BAUDRATE = UART_CalcBaudrateReload( - UART_GetClock(UARTx), init->UART_BaudRate); - UARTx->CTRL_b.MODE = - (init->UART_Parity == UART_Parity_None) ? - UART_Mode_8b : UART_Mode_8b_Parity; - UARTx->CTRL_b.STOP = init->UART_StopBits; - UARTx->CTRL_b.PARITY = - (init->UART_Parity == UART_Parity_None) ? - UART_Parity_Even : init->UART_Parity; - UARTx->CTRL_b.LOOPBACK = init->UART_LoopBack; - UARTx->CTRL_b.RX_EN = init->UART_RxEn; - UARTx->CTRL_b.CTS = init->UART_CtsEn; - UARTx->CTRL_b.BAUD_MODE = - (init->UART_BaudRate > UART_BaudMode_Division) ? - UART_BaudMode_1 : UART_BaudMode_0; - UARTx->CTRL_b.FIFO_EN = TRUE; - UARTx->CTRL_b.RX_THRESHOLD = UART_WR_MAX_FIFO_SIZE; - UARTx->CTRL_b.RX_HALF_FULL = (UART_WR_MAX_FIFO_SIZE >> 1); - UARTx->TIMEOUT = 0xFF; - - UARTx->INT_MASK |= UART_Int_All; - UARTx->INT_SEEN &= UART_Int_All; + assert_param(IS_UART_ALL_PERIPH(UARTx)); + assert_param(init); + assert_param(IS_UART_STOPBITS(init->UART_StopBits)); + assert_param(IS_UART_PARITY(init->UART_Parity)); + + /* TODO : assume clock is 50MHz */ + UARTx->BAUDRATE = UART_CalcBaudrateReload( + UART_GetClock(UARTx), init->UART_BaudRate); + UARTx->CTRL_b.MODE = + (init->UART_Parity == UART_Parity_None) ? + UART_Mode_8b : UART_Mode_8b_Parity; + UARTx->CTRL_b.STOP = init->UART_StopBits; + UARTx->CTRL_b.PARITY = + (init->UART_Parity == UART_Parity_None) ? + UART_Parity_Even : init->UART_Parity; + UARTx->CTRL_b.LOOPBACK = init->UART_LoopBack; + UARTx->CTRL_b.RX_EN = init->UART_RxEn; + UARTx->CTRL_b.CTS = init->UART_CtsEn; + UARTx->CTRL_b.BAUD_MODE = + (init->UART_BaudRate > UART_BaudMode_Division) ? + UART_BaudMode_1 : UART_BaudMode_0; + UARTx->CTRL_b.FIFO_EN = TRUE; + UARTx->CTRL_b.RX_THRESHOLD = UART_WR_MAX_FIFO_SIZE; + UARTx->CTRL_b.RX_HALF_FULL = (UART_WR_MAX_FIFO_SIZE >> 1); + UARTx->TIMEOUT = 0xFF; + + UARTx->INT_MASK |= UART_Int_All; + UARTx->INT_SEEN &= UART_Int_All; } void UART_EnableInt(UART0_Type* UARTx, uint32_t Int, BOOL enable) { - assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(IS_UART_INT(Int)); - + assert_param(IS_UART_ALL_PERIPH(UARTx)); + assert_param(IS_UART_INT(Int)); + if (enable) { - UARTx->INT_MASK &= ~Int; - } else { - UARTx->INT_MASK |= Int; - } - - UARTx->INT_MASK &= UART_Int_All; + UARTx->INT_MASK &= ~Int; + } else { + UARTx->INT_MASK |= Int; + } + + UARTx->INT_MASK &= UART_Int_All; } void UART_Enable(UART0_Type* UARTx, BOOL enable) { - assert_param(IS_UART_ALL_PERIPH(UARTx)); - - UARTx->RUN_b.EN = enable; + assert_param(IS_UART_ALL_PERIPH(UARTx)); + + UARTx->RUN_b.EN = enable; } BOOL UART_GetIntStatus(UART0_Type* UARTx, uint32_t Int) { - assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(IS_UART_INT(Int)); - - if (0 != (UARTx->INT_SEEN & Int)) { - return TRUE; - } - - return FALSE; + assert_param(IS_UART_ALL_PERIPH(UARTx)); + assert_param(IS_UART_INT(Int)); + + if (0 != (UARTx->INT_SEEN & Int)) { + return TRUE; + } + + return FALSE; } void UART_ClearInt(UART0_Type* UARTx, uint32_t Int) { - assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(IS_UART_INT(Int)); - - UARTx->INT_SEEN = Int; + assert_param(IS_UART_ALL_PERIPH(UARTx)); + assert_param(IS_UART_INT(Int)); + + UARTx->INT_SEEN = Int; } uint8_t UART_Write(UART0_Type* UARTx, uint8_t Size, uint8_t* Data) { - uint8_t count; - - /* Check the parameters */ + uint8_t count; + + /* Check the parameters */ assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(Data); - - if (!UARTx->RUN_b.EN) { - return 0; - } - - count = 0; - while (!UARTx->STATUS_b.TF && count < Size) { - UARTx->TX_BUF = *(Data + count++); - } - - return count; + assert_param(Data); + + if (!UARTx->RUN_b.EN) { + return 0; + } + + count = 0; + while (!UARTx->STATUS_b.TF && count < Size) { + UARTx->TX_BUF = *(Data + count++); + } + + return count; } /* return value is actual read data size */ uint8_t UART_Read(UART0_Type* UARTx, uint8_t Size, uint8_t* Data) { - uint8_t count; - - assert_param(IS_UART_ALL_PERIPH(UARTx)); - assert_param(Data); - - if (!UARTx->RUN_b.EN) { - return 0; - } - - count = 0; - while (UARTx->STATUS_b.RNE && count < Size) { - *(Data + count++) = (UARTx->RX_BUF & 0x00FF); - } - - return count; + uint8_t count; + + assert_param(IS_UART_ALL_PERIPH(UARTx)); + assert_param(Data); + + if (!UARTx->RUN_b.EN) { + return 0; + } + + count = 0; + while (UARTx->STATUS_b.RNE && count < Size) { + *(Data + count++) = (UARTx->RX_BUF & 0x00FF); + } + + return count; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_usb.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_usb.c index 80c79d0b47..25a4adc878 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_usb.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_usb.c @@ -1,842 +1,842 @@ /** - ***************************************************************************** - * @file cmem7_usb.c - * - * @brief CMEM7 USB source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_usb.c + * + * @brief CMEM7 USB source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_usb.h" static void USB_SET_REG_HPRT(const USB_REG_HPRT *clr, const USB_REG_HPRT *set) { - USB_REG_HPRT hprt; - hprt.HPRT = USB->__HPRT; // @0x41300440 - hprt.HPRT_b.POC = hprt.HPRT_b.PEDC = hprt.HPRT_b.PE = hprt.HPRT_b.PCD = 0; - if (clr) - hprt.HPRT &= (~clr->HPRT); - if (set) - hprt.HPRT |= (set->HPRT); - USB->__HPRT = hprt.HPRT; + USB_REG_HPRT hprt; + hprt.HPRT = USB->__HPRT; // @0x41300440 + hprt.HPRT_b.POC = hprt.HPRT_b.PEDC = hprt.HPRT_b.PE = hprt.HPRT_b.PCD = 0; + if (clr) + hprt.HPRT &= (~clr->HPRT); + if (set) + hprt.HPRT |= (set->HPRT); + USB->__HPRT = hprt.HPRT; } void USB_coreInit(uint32_t type) { - USB->GINTEN = 0; - USB->GINTSTS = ~0; - GLOBAL_CTRL->USB_PHY_CTRL_b.CKISEL = 0; // Crystal - // core initialization - // choose PHY and soft reset - USB->GUSBCFG_b.PHY_IF = 0; // 60MHz, 8bit - USB->GUSBCFG_b.ULPI_UTMI_SEL = 0; // UTMI - USB->GUSBCFG_b.PHY_SEL = 0; // USB 2.0 HS UTMI+ - USB->GRSTCTL_b.CORE_SOFT_RST = 1; - while (USB->GRSTCTL_b.CORE_SOFT_RST == 1) ; - while (USB->GRSTCTL_b.AHB_IDLE == 0) ; + USB->GINTEN = 0; + USB->GINTSTS = ~0; + GLOBAL_CTRL->USB_PHY_CTRL_b.CKISEL = 0; // Crystal + // core initialization + // choose PHY and soft reset + USB->GUSBCFG_b.PHY_IF = 0; // 60MHz, 8bit + USB->GUSBCFG_b.ULPI_UTMI_SEL = 0; // UTMI + USB->GUSBCFG_b.PHY_SEL = 0; // USB 2.0 HS UTMI+ + USB->GRSTCTL_b.CORE_SOFT_RST = 1; + while (USB->GRSTCTL_b.CORE_SOFT_RST == 1) ; + while (USB->GRSTCTL_b.AHB_IDLE == 0) ; - USB->GAHBCFG_b.DMA_EN = 1; - USB->GAHBCFG_b.GLBL_INTR_EN = 1; - USB->GAHBCFG_b.BST_LEN = 0x1; // INCR + USB->GAHBCFG_b.DMA_EN = 1; + USB->GAHBCFG_b.GLBL_INTR_EN = 1; + USB->GAHBCFG_b.BST_LEN = 0x1; // INCR - USB->GINTEN_b.RFNE = FALSE; + USB->GINTEN_b.RFNE = FALSE; - USB->GUSBCFG_b.USB_TRD_TIM = 0x9; // 8-bit UTMI+ - USB->GUSBCFG_b.SRP_CAP = (type & 0x10) ? 1 : 0; - USB->GUSBCFG_b.HNP_CAP = (type & 0x20) ? 1 : 0; - if (type & 0x1) { - USB->GUSBCFG_b.FORCE_HOST_MODE = 1; - USB->GUSBCFG_b.FORCE_DEVICE_MODE = 0; - } else if (type & 0x2) { - USB->GUSBCFG_b.FORCE_DEVICE_MODE = 1; - USB->GUSBCFG_b.FORCE_HOST_MODE = 0; - } - udelay(50000); + USB->GUSBCFG_b.USB_TRD_TIM = 0x9; // 8-bit UTMI+ + USB->GUSBCFG_b.SRP_CAP = (type & 0x10) ? 1 : 0; + USB->GUSBCFG_b.HNP_CAP = (type & 0x20) ? 1 : 0; + if (type & 0x1) { + USB->GUSBCFG_b.FORCE_HOST_MODE = 1; + USB->GUSBCFG_b.FORCE_DEVICE_MODE = 0; + } else if (type & 0x2) { + USB->GUSBCFG_b.FORCE_DEVICE_MODE = 1; + USB->GUSBCFG_b.FORCE_HOST_MODE = 0; + } + udelay(50000); } void USB_EnableInt(BOOL enable) { - USB->GAHBCFG_b.GLBL_INTR_EN = enable; + USB->GAHBCFG_b.GLBL_INTR_EN = enable; } void USB_FlushFIFO(uint32_t num) { - if (num < 0x10) { - USB->GRSTCTL_b.TX_FIFO_FLUSH_NUM = num; - USB->GRSTCTL_b.TX_FIFO_FLUSH = 1; - while (USB->GRSTCTL_b.TX_FIFO_FLUSH); - } else if (num > 0x10) { - USB->GRSTCTL_b.RX_FIFO_FLUSH = 1; - while (USB->GRSTCTL_b.RX_FIFO_FLUSH); - } else { - USB->GRSTCTL_b.TX_FIFO_FLUSH_NUM = 0; - USB->GRSTCTL_b.TX_FIFO_ALL = 1; - USB->GRSTCTL_b.TX_FIFO_FLUSH = 1; - while (USB->GRSTCTL_b.TX_FIFO_FLUSH); - } + if (num < 0x10) { + USB->GRSTCTL_b.TX_FIFO_FLUSH_NUM = num; + USB->GRSTCTL_b.TX_FIFO_FLUSH = 1; + while (USB->GRSTCTL_b.TX_FIFO_FLUSH); + } else if (num > 0x10) { + USB->GRSTCTL_b.RX_FIFO_FLUSH = 1; + while (USB->GRSTCTL_b.RX_FIFO_FLUSH); + } else { + USB->GRSTCTL_b.TX_FIFO_FLUSH_NUM = 0; + USB->GRSTCTL_b.TX_FIFO_ALL = 1; + USB->GRSTCTL_b.TX_FIFO_FLUSH = 1; + while (USB->GRSTCTL_b.TX_FIFO_FLUSH); + } } BOOL USB_ogtIsBdevID() { - return USB->GOTGCTL_b.CON_ID_STS ? TRUE : FALSE; + return USB->GOTGCTL_b.CON_ID_STS ? TRUE : FALSE; } BOOL USB_hostVBus(uint32_t opt) { - if (opt & 0x2) { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PP = 1; - if (opt & 0x1) - USB_SET_REG_HPRT(NULL, &hprt); - else - USB_SET_REG_HPRT(&hprt, NULL); - } - return USB->__HPRT_b.PP ? TRUE : FALSE; + if (opt & 0x2) { + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PP = 1; + if (opt & 0x1) + USB_SET_REG_HPRT(NULL, &hprt); + else + USB_SET_REG_HPRT(&hprt, NULL); + } + return USB->__HPRT_b.PP ? TRUE : FALSE; } void USB_hostInit() { - USB_REG_HPRT hprt; - // HOST MODE - USB->HCFG_b.FS_LS_PCS = 0x0; // PHY clock is running at 30/60 MHz - USB->HCFG_b.FS_LS_SUPPORT = 0x0; // HS/FS/LS - USB->HCFG_b.EN_SG_DMA = 0x1; // Enable Scatter/Gather DMA - hprt.HPRT = 0; - hprt.HPRT_b.PP = 1; - USB_SET_REG_HPRT(NULL, &hprt); + USB_REG_HPRT hprt; + // HOST MODE + USB->HCFG_b.FS_LS_PCS = 0x0; // PHY clock is running at 30/60 MHz + USB->HCFG_b.FS_LS_SUPPORT = 0x0; // HS/FS/LS + USB->HCFG_b.EN_SG_DMA = 0x1; // Enable Scatter/Gather DMA + hprt.HPRT = 0; + hprt.HPRT_b.PP = 1; + USB_SET_REG_HPRT(NULL, &hprt); } void USB_HostResetPort(BOOL rst) { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PRESET = 1; - if (rst) - USB_SET_REG_HPRT(NULL, &hprt); - else - USB_SET_REG_HPRT(&hprt, NULL); + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PRESET = 1; + if (rst) + USB_SET_REG_HPRT(NULL, &hprt); + else + USB_SET_REG_HPRT(&hprt, NULL); } uint16_t USB_HostGetCurFrame() { - return USB->HFNUM_b.FN; + return USB->HFNUM_b.FN; } void USB_HostSuspendPort() { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PS = 1; - USB_SET_REG_HPRT(NULL, &hprt); + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PS = 1; + USB_SET_REG_HPRT(NULL, &hprt); } USB_ENUM_SPEED USB_hostGetEnumSpd() { - return (USB_ENUM_SPEED)USB->__HPRT_b.SPEED; + return (USB_ENUM_SPEED)USB->__HPRT_b.SPEED; } BOOL USB_hostPrtConn() { - return USB->__HPRT_b.PCS ? TRUE : FALSE; + return USB->__HPRT_b.PCS ? TRUE : FALSE; } void USB_hostCH0(uint32_t devaddr, OTG_DESCRIPTOR *desc, uint32_t ctd, uint32_t ntd, BOOL ping, uint32_t pid, uint32_t mps, uint32_t epnum, BOOL in, USB_EP_TYPE eptype, USB_ENUM_SPEED speed) { - USB->HCDMA0_b.ADDR = SET_HCDMA_DESC_ADDR(desc); - USB->HCDMA0_b.CTD = ctd; - USB->HCTSIZ0_b.PING = ping ? 1 : 0; - USB->HCTSIZ0_b.NTD = ntd; - USB->HCTSIZ0_b.PID = pid; - USB->HCC0_b.MPS = mps; - USB->HCC0_b.EP_NUM = epnum; - USB->HCC0_b.EP_DIR = in ? 1 : 0; - USB->HCC0_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; - USB->HCC0_b.EP_TYPE = eptype; - USB->HCC0_b.EC = 0; - USB->HCC0_b.DA = devaddr; - USB->HCC0_b.CE = 1; + USB->HCDMA0_b.ADDR = SET_HCDMA_DESC_ADDR(desc); + USB->HCDMA0_b.CTD = ctd; + USB->HCTSIZ0_b.PING = ping ? 1 : 0; + USB->HCTSIZ0_b.NTD = ntd; + USB->HCTSIZ0_b.PID = pid; + USB->HCC0_b.MPS = mps; + USB->HCC0_b.EP_NUM = epnum; + USB->HCC0_b.EP_DIR = in ? 1 : 0; + USB->HCC0_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; + USB->HCC0_b.EP_TYPE = eptype; + USB->HCC0_b.EC = 0; + USB->HCC0_b.DA = devaddr; + USB->HCC0_b.CE = 1; } void USB_hostCH1(uint32_t devaddr, OTG_DESCRIPTOR *desc, uint32_t ctd, uint32_t ntd, BOOL ping, uint32_t pid, uint32_t mps, uint32_t epnum, BOOL in, USB_EP_TYPE eptype, USB_ENUM_SPEED speed) { - USB->HCDMA1_b.ADDR = SET_HCDMA_DESC_ADDR(desc); - USB->HCDMA1_b.CTD = ctd; - USB->HCTSIZ1_b.PING = ping ? 1 : 0; - USB->HCTSIZ1_b.NTD = ntd; - USB->HCTSIZ1_b.PID = pid; - USB->HCC1_b.MPS = mps; - USB->HCC1_b.EP_NUM = epnum; - USB->HCC1_b.EP_DIR = in ? 1 : 0; - USB->HCC1_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; - USB->HCC1_b.EP_TYPE = eptype; - USB->HCC1_b.EC = 0; - USB->HCC1_b.DA = devaddr; - USB->HCC1_b.CE = 1; + USB->HCDMA1_b.ADDR = SET_HCDMA_DESC_ADDR(desc); + USB->HCDMA1_b.CTD = ctd; + USB->HCTSIZ1_b.PING = ping ? 1 : 0; + USB->HCTSIZ1_b.NTD = ntd; + USB->HCTSIZ1_b.PID = pid; + USB->HCC1_b.MPS = mps; + USB->HCC1_b.EP_NUM = epnum; + USB->HCC1_b.EP_DIR = in ? 1 : 0; + USB->HCC1_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; + USB->HCC1_b.EP_TYPE = eptype; + USB->HCC1_b.EC = 0; + USB->HCC1_b.DA = devaddr; + USB->HCC1_b.CE = 1; } void USB_hostCH2(uint32_t devaddr, OTG_DESCRIPTOR *desc, uint32_t ctd, uint32_t ntd, BOOL ping, uint32_t pid, uint32_t mps, uint32_t epnum, BOOL in, USB_EP_TYPE eptype, USB_ENUM_SPEED speed) { - USB->HCDMA2_b.ADDR = SET_HCDMA_DESC_ADDR(desc); - USB->HCDMA2_b.CTD = ctd; - USB->HCTSIZ2_b.PING = ping ? 1 : 0; - USB->HCTSIZ2_b.NTD = ntd; - USB->HCTSIZ2_b.PID = pid; - USB->HCC2_b.MPS = mps; - USB->HCC2_b.EP_NUM = epnum; - USB->HCC2_b.EP_DIR = in ? 1 : 0; - USB->HCC2_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; - USB->HCC2_b.EP_TYPE = eptype; - USB->HCC2_b.EC = 0; - USB->HCC2_b.DA = devaddr; - USB->HCC2_b.CE = 1; + USB->HCDMA2_b.ADDR = SET_HCDMA_DESC_ADDR(desc); + USB->HCDMA2_b.CTD = ctd; + USB->HCTSIZ2_b.PING = ping ? 1 : 0; + USB->HCTSIZ2_b.NTD = ntd; + USB->HCTSIZ2_b.PID = pid; + USB->HCC2_b.MPS = mps; + USB->HCC2_b.EP_NUM = epnum; + USB->HCC2_b.EP_DIR = in ? 1 : 0; + USB->HCC2_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; + USB->HCC2_b.EP_TYPE = eptype; + USB->HCC2_b.EC = 0; + USB->HCC2_b.DA = devaddr; + USB->HCC2_b.CE = 1; } int USB_hostCHn(uint32_t ch, uint32_t devaddr, OTG_DESCRIPTOR *desc, uint32_t ctd, uint32_t ntd, BOOL ping, uint32_t pid, uint32_t mps, uint32_t epnum, BOOL in, USB_EP_TYPE eptype, USB_ENUM_SPEED speed) { - USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); + USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); - if (ch > 15) - return -1; - USBn->HCDMA0_b.ADDR = SET_HCDMA_DESC_ADDR(desc); - USBn->HCDMA0_b.CTD = ctd; - USBn->HCTSIZ0_b.PING = ping ? 1 : 0; - USBn->HCTSIZ0_b.NTD = ntd; - USBn->HCTSIZ0_b.PID = pid; - USBn->HCC0_b.MPS = mps; - USBn->HCC0_b.EP_NUM = epnum; - USBn->HCC0_b.EP_DIR = in ? 1 : 0; - USBn->HCC0_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; - USBn->HCC0_b.EP_TYPE = eptype; - USBn->HCC0_b.EC = 0; - USBn->HCC0_b.DA = devaddr; - USBn->HCC0_b.CE = 1; - return 0; + if (ch > 15) + return -1; + USBn->HCDMA0_b.ADDR = SET_HCDMA_DESC_ADDR(desc); + USBn->HCDMA0_b.CTD = ctd; + USBn->HCTSIZ0_b.PING = ping ? 1 : 0; + USBn->HCTSIZ0_b.NTD = ntd; + USBn->HCTSIZ0_b.PID = pid; + USBn->HCC0_b.MPS = mps; + USBn->HCC0_b.EP_NUM = epnum; + USBn->HCC0_b.EP_DIR = in ? 1 : 0; + USBn->HCC0_b.LSD = (USB_ENUM_SPEED_LS == speed) ? 1 : 0; + USBn->HCC0_b.EP_TYPE = eptype; + USBn->HCC0_b.EC = 0; + USBn->HCC0_b.DA = devaddr; + USBn->HCC0_b.CE = 1; + return 0; } int USB_hostCHnHalt(uint32_t ch) { - uint32_t hcchar; - USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); + uint32_t hcchar; + USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); - if (ch > 15) - return -1; - hcchar = USBn->HCC0; - hcchar |= (0x3 << 30); - USBn->HCC0 = hcchar; - return 0; + if (ch > 15) + return -1; + hcchar = USBn->HCC0; + hcchar |= (0x3 << 30); + USBn->HCC0 = hcchar; + return 0; } BOOL USB_hostPortDisable(BOOL dis) { - if (dis) { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PE = 1; - USB_SET_REG_HPRT(&hprt, NULL); - } - return USB->__HPRT_b.PE ? FALSE : TRUE; + if (dis) { + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PE = 1; + USB_SET_REG_HPRT(&hprt, NULL); + } + return USB->__HPRT_b.PE ? FALSE : TRUE; } BOOL USB_roleIsHost() { - return USB->GINTSTS_b.CUR_MOD ? TRUE : FALSE; + return USB->GINTSTS_b.CUR_MOD ? TRUE : FALSE; } void USB_hostINT_enConn(BOOL en) { - USB->GINTEN_b.HP = en; + USB->GINTEN_b.HP = en; } BOOL USB_hostINT_isConn() { - return USB->GINTSTS_b.HP ? TRUE : FALSE; + return USB->GINTSTS_b.HP ? TRUE : FALSE; } BOOL USB_hostINT_isPCD() { - return USB->__HPRT_b.PCD ? TRUE : FALSE; + return USB->__HPRT_b.PCD ? TRUE : FALSE; } void USB_hostINT_clrPCD() { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PCD = 1; - USB_SET_REG_HPRT(NULL, &hprt); + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PCD = 1; + USB_SET_REG_HPRT(NULL, &hprt); } BOOL USB_hostINT_isPEDC() { - return USB->__HPRT_b.PEDC ? TRUE : FALSE; + return USB->__HPRT_b.PEDC ? TRUE : FALSE; } void USB_hostINT_clrPEDC() { - USB_REG_HPRT hprt; - hprt.HPRT = 0; - hprt.HPRT_b.PEDC = 1; - USB_SET_REG_HPRT(NULL, &hprt); + USB_REG_HPRT hprt; + hprt.HPRT = 0; + hprt.HPRT_b.PEDC = 1; + USB_SET_REG_HPRT(NULL, &hprt); } int USB_hostINT_enDone(uint32_t ch, BOOL en) { - USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); + USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); - if (ch > 15) - return -1; + if (ch > 15) + return -1; - if (en) { - USB->GINTEN_b.HC = 1; - USB->HAINT_EN_b.EN |= BIT(ch); - } else - USB->HAINT_EN_b.EN &= ~BIT(ch); + if (en) { + USB->GINTEN_b.HC = 1; + USB->HAINT_EN_b.EN |= BIT(ch); + } else + USB->HAINT_EN_b.EN &= ~BIT(ch); - USBn->HCINT_EN0_b.TC = USBn->HCINT_EN0_b.CH_HALT = USBn->HCINT_EN0_b.BNA = en ? 1 : 0; - return 0; + USBn->HCINT_EN0_b.TC = USBn->HCINT_EN0_b.CH_HALT = USBn->HCINT_EN0_b.BNA = en ? 1 : 0; + return 0; } uint32_t USB_hostINT_isDone(uint32_t ch) { - uint32_t retval = 0; + uint32_t retval = 0; - if (ch > 15) - return 0; + if (ch > 15) + return 0; - if ((USB->GINTSTS_b.HC) && ((USB->HAINT & BIT(ch)))) { - USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); - if (USBn->HCINT0_b.TC) { - USBn->HCINT0 = BIT(0); - retval |= 0x1; - } - if (USBn->HCINT0_b.BNA) { - USBn->HCINT0 = BIT(11); - retval |= 0x2; - } - if (USBn->HCINT0_b.CH_HALT) { - USBn->HCINT0 = BIT(1); - retval |= 0x4; - } - if (USBn->HCINT0_b.ETE) { - USBn->HCINT0 = BIT(12); - retval |= 0x8; - } - } - return retval; + if ((USB->GINTSTS_b.HC) && ((USB->HAINT & BIT(ch)))) { + USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); + if (USBn->HCINT0_b.TC) { + USBn->HCINT0 = BIT(0); + retval |= 0x1; + } + if (USBn->HCINT0_b.BNA) { + USBn->HCINT0 = BIT(11); + retval |= 0x2; + } + if (USBn->HCINT0_b.CH_HALT) { + USBn->HCINT0 = BIT(1); + retval |= 0x4; + } + if (USBn->HCINT0_b.ETE) { + USBn->HCINT0 = BIT(12); + retval |= 0x8; + } + } + return retval; } uint32_t USB_hostINT_isPend(uint32_t ch) { - uint32_t retval = 0; + uint32_t retval = 0; - if (ch > 15) - return 0; + if (ch > 15) + return 0; - if ((USB->GINTSTS_b.HC) && ((USB->HAINT & BIT(ch)))) { - USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); - retval = USBn->HCINT0; - USBn->HCINT0 = retval; - } - return retval; + if ((USB->GINTSTS_b.HC) && ((USB->HAINT & BIT(ch)))) { + USB_Type *USBn = (USB_Type *)(((char *)USB) + (ch * 0x20)); + retval = USBn->HCINT0; + USBn->HCINT0 = retval; + } + return retval; } void USB_devInit() { - // If still has some int needed to be enable - USB->GINTEN_b.MODE_MIS = TRUE; - USB->GINTEN_b.OTG_INT = TRUE; + // If still has some int needed to be enable + USB->GINTEN_b.MODE_MIS = TRUE; + USB->GINTEN_b.OTG_INT = TRUE; - // DEVICE MODE - USB->GINTEN_b.RFNE = FALSE; // REG_CS(0x018/*GINTMSK*/, BIT(5)/*NPTxFEmpMsk*/ | BIT(4)/*RxFLvlMsk*/, 0); - USB->GINTEN_b.NPTFE = FALSE; - USB->DCFG_b.DSPEED = 0; // HS DEV - USB->DCFG_b.NZLSOH = 0; // REG_CS(0x800/*DCFG*/, BIT(2)/*NZStsOUTHShk*/ | BIT(1) | BIT(0)/*DevSpd: HS*/, BIT(23)/*DescDMA*/ | BIT(13)/*EnDevOutNak*/); - USB->DCFG_b.EN_SG_DMA = 1; - USB->DCFG_b.EDON = 1; - USB->DCTL_b.SD = 0; + // DEVICE MODE + USB->GINTEN_b.RFNE = FALSE; // REG_CS(0x018/*GINTMSK*/, BIT(5)/*NPTxFEmpMsk*/ | BIT(4)/*RxFLvlMsk*/, 0); + USB->GINTEN_b.NPTFE = FALSE; + USB->DCFG_b.DSPEED = 0; // HS DEV + USB->DCFG_b.NZLSOH = 0; // REG_CS(0x800/*DCFG*/, BIT(2)/*NZStsOUTHShk*/ | BIT(1) | BIT(0)/*DevSpd: HS*/, BIT(23)/*DescDMA*/ | BIT(13)/*EnDevOutNak*/); + USB->DCFG_b.EN_SG_DMA = 1; + USB->DCFG_b.EDON = 1; + USB->DCTL_b.SD = 0; } USB_ENUM_SPEED USB_devGetEnumSpd() { - return (USB_ENUM_SPEED)USB->DSTS_b.SPEED; + return (USB_ENUM_SPEED)USB->DSTS_b.SPEED; } void USB_devSetAddress(uint32_t addr) { - USB->DCFG_b.DEVICE_ADDR = addr; + USB->DCFG_b.DEVICE_ADDR = addr; } void USB_devEP0out(uint32_t size, uint32_t pktcnt, uint32_t stpcnt, void *desc, BOOL snoop) { - USB->DOEPTSIZ0_b.SIZE = size; - USB->DOEPTSIZ0_b.PACKET_CNT = pktcnt; - USB->DOEPTSIZ0_b.SETUP_CNT = stpcnt; - USB->DOEPDMA0 = (uint32_t)(desc); - USB->DOEPCTL0_b.SNOOP = snoop; - USB->DOEPCTL0_b.CNAK = 1; - USB->DOEPCTL0_b.EPE = 1; // REG_CS(0xB00/*DOEPCTL0*/, 0, BIT(31)/*EPEna*/); + USB->DOEPTSIZ0_b.SIZE = size; + USB->DOEPTSIZ0_b.PACKET_CNT = pktcnt; + USB->DOEPTSIZ0_b.SETUP_CNT = stpcnt; + USB->DOEPDMA0 = (uint32_t)(desc); + USB->DOEPCTL0_b.SNOOP = snoop; + USB->DOEPCTL0_b.CNAK = 1; + USB->DOEPCTL0_b.EPE = 1; // REG_CS(0xB00/*DOEPCTL0*/, 0, BIT(31)/*EPEna*/); } BOOL USB_devEP0in(uint32_t size, uint32_t pktcnt, void *desc, uint32_t mps/*8,16,32,64-byte*/) { - switch (mps) { - case 64: mps = 0x0; break; - case 32: mps = 0x1; break; - case 16: mps = 0x2; break; - case 8: mps = 0x3; break; - default: return FALSE; - } - USB->DIEPTSIZ0_b.SIZE = size; - USB->DIEPTSIZ0_b.PACKET_CNT = pktcnt; - USB->DIEPDMA0 = (uint32_t)(desc); - USB->DIEPCTL0_b.MPS = mps; - USB->DIEPCTL0_b.TX_FIFO_NUM = 0; - USB->DIEPCTL0_b.CNAK = 1; - USB->DIEPCTL0_b.EPE = 1; // REG_CS(0xB00/*DOEPCTL0*/, 0, BIT(31)/*EPEna*/); - return TRUE; + switch (mps) { + case 64: mps = 0x0; break; + case 32: mps = 0x1; break; + case 16: mps = 0x2; break; + case 8: mps = 0x3; break; + default: return FALSE; + } + USB->DIEPTSIZ0_b.SIZE = size; + USB->DIEPTSIZ0_b.PACKET_CNT = pktcnt; + USB->DIEPDMA0 = (uint32_t)(desc); + USB->DIEPCTL0_b.MPS = mps; + USB->DIEPCTL0_b.TX_FIFO_NUM = 0; + USB->DIEPCTL0_b.CNAK = 1; + USB->DIEPCTL0_b.EPE = 1; // REG_CS(0xB00/*DOEPCTL0*/, 0, BIT(31)/*EPEna*/); + return TRUE; } void USB_devActEP1(const BOOL in, const uint32_t mps, USB_EP_TYPE type) { - if (in) { - USB->DIEPCTL1_b.MPS = mps; - USB->DIEPCTL1_b.EP_TYPE = type; - USB->DIEPCTL1_b.UAE = (mps != 0) ? 1 : 0; - } else { - USB->DOEPCTL1_b.MPS = mps; - USB->DOEPCTL1_b.EP_TYPE = type; - USB->DOEPCTL1_b.UAE = (mps != 0) ? 1 : 0; - } + if (in) { + USB->DIEPCTL1_b.MPS = mps; + USB->DIEPCTL1_b.EP_TYPE = type; + USB->DIEPCTL1_b.UAE = (mps != 0) ? 1 : 0; + } else { + USB->DOEPCTL1_b.MPS = mps; + USB->DOEPCTL1_b.EP_TYPE = type; + USB->DOEPCTL1_b.UAE = (mps != 0) ? 1 : 0; + } } void USB_devActEP2(const BOOL in, const uint32_t mps, USB_EP_TYPE type) { - if (in) { - USB->DIEPCTL2_b.MPS = mps; - USB->DIEPCTL2_b.EP_TYPE = type; - USB->DIEPCTL2_b.UAE = (mps != 0) ? 1 : 0; - } else { - USB->DOEPCTL2_b.MPS = mps; - USB->DOEPCTL2_b.EP_TYPE = type; - USB->DOEPCTL2_b.UAE = (mps != 0) ? 1 : 0; - } + if (in) { + USB->DIEPCTL2_b.MPS = mps; + USB->DIEPCTL2_b.EP_TYPE = type; + USB->DIEPCTL2_b.UAE = (mps != 0) ? 1 : 0; + } else { + USB->DOEPCTL2_b.MPS = mps; + USB->DOEPCTL2_b.EP_TYPE = type; + USB->DOEPCTL2_b.UAE = (mps != 0) ? 1 : 0; + } } void USB_devEP1in(uint32_t size, uint32_t pktcnt, uint32_t pid, void *desc) { - USB->DIEPTSIZ1_b.SIZE = size; - USB->DIEPTSIZ1_b.PACKET_CNT = pktcnt; - USB->DIEPDMA1 = (uint32_t)(desc); - USB->DIEPCTL1_b.CNAK = 1; - USB->DIEPCTL1_b.SET_D0_PID = (pid >> 0) & 0x1; - USB->DIEPCTL1_b.SET_D1_PID = (pid >> 1) & 0x1; - USB->DIEPCTL1_b.EPE = 1; + USB->DIEPTSIZ1_b.SIZE = size; + USB->DIEPTSIZ1_b.PACKET_CNT = pktcnt; + USB->DIEPDMA1 = (uint32_t)(desc); + USB->DIEPCTL1_b.CNAK = 1; + USB->DIEPCTL1_b.SET_D0_PID = (pid >> 0) & 0x1; + USB->DIEPCTL1_b.SET_D1_PID = (pid >> 1) & 0x1; + USB->DIEPCTL1_b.EPE = 1; } void USB_devEP1out(uint32_t size, uint32_t pktcnt, uint32_t pid, uint32_t stpcnt, void *desc, BOOL snoop) { - USB->DOEPTSIZ1_b.SIZE = size; - USB->DOEPTSIZ1_b.PACKET_CNT = pktcnt; - USB->DOEPTSIZ1_b.SETUPCNT_PID = stpcnt; - USB->DOEPDMA1 = (uint32_t)(desc); - USB->DOEPCTL1_b.EC = snoop; - USB->DOEPCTL1_b.CNAK = 1; - USB->DOEPCTL1_b.SET_D0_PID = (pid >> 0) & 0x1; - USB->DOEPCTL1_b.SET_D1_PID = (pid >> 1) & 0x1; - USB->DOEPCTL1_b.EPE = 1; + USB->DOEPTSIZ1_b.SIZE = size; + USB->DOEPTSIZ1_b.PACKET_CNT = pktcnt; + USB->DOEPTSIZ1_b.SETUPCNT_PID = stpcnt; + USB->DOEPDMA1 = (uint32_t)(desc); + USB->DOEPCTL1_b.EC = snoop; + USB->DOEPCTL1_b.CNAK = 1; + USB->DOEPCTL1_b.SET_D0_PID = (pid >> 0) & 0x1; + USB->DOEPCTL1_b.SET_D1_PID = (pid >> 1) & 0x1; + USB->DOEPCTL1_b.EPE = 1; } void USB_devEP2in(uint32_t size, uint32_t pktcnt, uint32_t pid, void *desc) { - USB->DIEPTSIZ2_b.SIZE = size; - USB->DIEPTSIZ2_b.PACKET_CNT = pktcnt; - USB->DIEPDMA2 = (uint32_t)(desc); - USB->DIEPCTL2_b.CNAK = 1; - USB->DIEPCTL2_b.SET_D0_PID = (pid >> 0) & 0x1; - USB->DIEPCTL2_b.SET_D1_PID = (pid >> 1) & 0x1; - USB->DIEPCTL2_b.EPE = 1; + USB->DIEPTSIZ2_b.SIZE = size; + USB->DIEPTSIZ2_b.PACKET_CNT = pktcnt; + USB->DIEPDMA2 = (uint32_t)(desc); + USB->DIEPCTL2_b.CNAK = 1; + USB->DIEPCTL2_b.SET_D0_PID = (pid >> 0) & 0x1; + USB->DIEPCTL2_b.SET_D1_PID = (pid >> 1) & 0x1; + USB->DIEPCTL2_b.EPE = 1; } void USB_devEP2out(uint32_t size, uint32_t pktcnt, uint32_t pid, uint32_t stpcnt, void *desc, BOOL snoop) { - USB->DOEPTSIZ2_b.SIZE = size; - USB->DOEPTSIZ2_b.PACKET_CNT = pktcnt; - USB->DOEPTSIZ2_b.SETUPCNT_PID = stpcnt; - USB->DOEPDMA2 = (uint32_t)(desc); - USB->DOEPCTL2_b.EC = snoop; - USB->DOEPCTL2_b.CNAK = 1; - USB->DOEPCTL2_b.SET_D0_PID = (pid >> 0) & 0x1; - USB->DOEPCTL2_b.SET_D1_PID = (pid >> 1) & 0x1; - USB->DOEPCTL2_b.EPE = 1; + USB->DOEPTSIZ2_b.SIZE = size; + USB->DOEPTSIZ2_b.PACKET_CNT = pktcnt; + USB->DOEPTSIZ2_b.SETUPCNT_PID = stpcnt; + USB->DOEPDMA2 = (uint32_t)(desc); + USB->DOEPCTL2_b.EC = snoop; + USB->DOEPCTL2_b.CNAK = 1; + USB->DOEPCTL2_b.SET_D0_PID = (pid >> 0) & 0x1; + USB->DOEPCTL2_b.SET_D1_PID = (pid >> 1) & 0x1; + USB->DOEPCTL2_b.EPE = 1; } void USB_devNAKhandshake(uint32_t ep, BOOL in, BOOL en) { - switch (ep) { - case 0: - if (in) { - if (en) USB->DIEPCTL0_b.SNAK = 1; else USB->DIEPCTL0_b.CNAK = 1; - } else { - if (en) USB->DOEPCTL0_b.SNAK = 1; else USB->DOEPCTL0_b.CNAK = 1; - } - break; - case 1: - if (in) { - if (en) USB->DIEPCTL1_b.SNAK = 1; else USB->DIEPCTL1_b.CNAK = 1; - } else { - if (en) USB->DOEPCTL1_b.SNAK = 1; else USB->DOEPCTL1_b.CNAK = 1; - } - break; - case 2: - if (in) { - if (en) USB->DIEPCTL2_b.SNAK = 1; else USB->DIEPCTL2_b.CNAK = 1; - } else { - if (en) USB->DOEPCTL2_b.SNAK = 1; else USB->DOEPCTL2_b.CNAK = 1; - } - break; - default: - break; - } + switch (ep) { + case 0: + if (in) { + if (en) USB->DIEPCTL0_b.SNAK = 1; else USB->DIEPCTL0_b.CNAK = 1; + } else { + if (en) USB->DOEPCTL0_b.SNAK = 1; else USB->DOEPCTL0_b.CNAK = 1; + } + break; + case 1: + if (in) { + if (en) USB->DIEPCTL1_b.SNAK = 1; else USB->DIEPCTL1_b.CNAK = 1; + } else { + if (en) USB->DOEPCTL1_b.SNAK = 1; else USB->DOEPCTL1_b.CNAK = 1; + } + break; + case 2: + if (in) { + if (en) USB->DIEPCTL2_b.SNAK = 1; else USB->DIEPCTL2_b.CNAK = 1; + } else { + if (en) USB->DOEPCTL2_b.SNAK = 1; else USB->DOEPCTL2_b.CNAK = 1; + } + break; + default: + break; + } } BOOL USB_devSTALLhandshake(uint32_t ep, BOOL in, BOOL en) { - BOOL retval = FALSE; - switch (ep) { - case 0: - if (in) { - retval = USB->DIEPCTL0_b.STALL; - USB->DIEPCTL0_b.STALL = en ? 1 : 0; - } else { - retval = USB->DOEPCTL0_b.STALL; - USB->DOEPCTL0_b.STALL = en ? 1 : 0; - } - break; - case 1: - if (in) { - retval = USB->DIEPCTL1_b.STALL; - USB->DIEPCTL1_b.STALL = en ? 1 : 0; - } else { - retval = USB->DOEPCTL1_b.STALL; - USB->DOEPCTL1_b.STALL = en ? 1 : 0; - } - break; - case 2: - if (in) { - retval = USB->DIEPCTL2_b.STALL; - USB->DIEPCTL2_b.STALL = en ? 1 : 0; - } else { - retval = USB->DOEPCTL2_b.STALL; - USB->DOEPCTL2_b.STALL = en ? 1 : 0; - } - break; - default: - break; - } - return retval; + BOOL retval = FALSE; + switch (ep) { + case 0: + if (in) { + retval = USB->DIEPCTL0_b.STALL; + USB->DIEPCTL0_b.STALL = en ? 1 : 0; + } else { + retval = USB->DOEPCTL0_b.STALL; + USB->DOEPCTL0_b.STALL = en ? 1 : 0; + } + break; + case 1: + if (in) { + retval = USB->DIEPCTL1_b.STALL; + USB->DIEPCTL1_b.STALL = en ? 1 : 0; + } else { + retval = USB->DOEPCTL1_b.STALL; + USB->DOEPCTL1_b.STALL = en ? 1 : 0; + } + break; + case 2: + if (in) { + retval = USB->DIEPCTL2_b.STALL; + USB->DIEPCTL2_b.STALL = en ? 1 : 0; + } else { + retval = USB->DOEPCTL2_b.STALL; + USB->DOEPCTL2_b.STALL = en ? 1 : 0; + } + break; + default: + break; + } + return retval; } void USB_devINT_enDone(uint32_t ep, BOOL in, BOOL en) { - if (in) { - USB->DIEPEN_b.TIMEOUT = en ? 1 : 0; - USB->DIEPEN_b.TC = en ? 1 : 0; - if (en) { - USB->GINTEN_b.IEP_INT = 1; - USB->DAINT_EN_b.IN_EN |= BIT(ep); - } else - USB->DAINT_EN_b.IN_EN &= ~BIT(ep); - } else { - USB->DOEPEN_b.SPD = en ? 1 : 0; - USB->DOEPEN_b.TC = en ? 1 : 0; - if (en) { - USB->GINTEN_b.OEP_INT = 1; - USB->DAINT_EN_b.OUT_EN |= BIT(ep); - } else - USB->DAINT_EN_b.OUT_EN &= ~BIT(ep); - } + if (in) { + USB->DIEPEN_b.TIMEOUT = en ? 1 : 0; + USB->DIEPEN_b.TC = en ? 1 : 0; + if (en) { + USB->GINTEN_b.IEP_INT = 1; + USB->DAINT_EN_b.IN_EN |= BIT(ep); + } else + USB->DAINT_EN_b.IN_EN &= ~BIT(ep); + } else { + USB->DOEPEN_b.SPD = en ? 1 : 0; + USB->DOEPEN_b.TC = en ? 1 : 0; + if (en) { + USB->GINTEN_b.OEP_INT = 1; + USB->DAINT_EN_b.OUT_EN |= BIT(ep); + } else + USB->DAINT_EN_b.OUT_EN &= ~BIT(ep); + } } uint32_t USB_devINT_isDone(uint32_t ep, BOOL in) { - int32_t retval = 0; - if (in) { - if (USB->GINTSTS_b.IEP_INT) - switch (ep) { - case 0: - if (USB->DIEPINT0_b.TC) { - retval |= 0x1; - USB->DIEPINT0 = BIT(0); - } - if (USB->DIEPINT0_b.BNA) { - retval |= 0x2; - USB->DIEPINT0 = BIT(9); - } - break; - case 1: - if (USB->DIEPINT1_b.TC) { - retval |= 0x1; - USB->DIEPINT1 = BIT(0); - } - if (USB->DIEPINT1_b.BNA) { - retval |= 0x2; - USB->DIEPINT1 = BIT(9); - } - break; - case 2: - if (USB->DIEPINT2_b.TC) { - retval |= 0x1; - USB->DIEPINT2 = BIT(0); - } - if (USB->DIEPINT2_b.BNA) { - retval |= 0x2; - USB->DIEPINT2 = BIT(9); - } - default: - break; - } - } else { - if (USB->GINTSTS_b.OEP_INT) - switch (ep) { - case 0: - if (USB->DOEPINT0_b.TC) { - retval |= 0x1; - USB->DOEPINT0 = BIT(0); - } - if (USB->DOEPINT0_b.SETUP) { - retval |= 0x4; - USB->DOEPINT0 = BIT(3); - } - break; - case 1: - if (USB->DOEPINT1_b.TC) { - retval |= 0x1; - USB->DOEPINT1 = BIT(0); - } - if (USB->DOEPINT1_b.BNA) { - retval |= 0x2; - USB->DOEPINT1 = BIT(9); - } - break; - case 2: - if (USB->DOEPINT2_b.TC) { - retval |= 0x1; - USB->DOEPINT2 = BIT(0); - } - if (USB->DOEPINT2_b.BNA) { - retval |= 0x2; - USB->DOEPINT2 = BIT(9); - } - break; - default: - break; - } - } - return retval; + int32_t retval = 0; + if (in) { + if (USB->GINTSTS_b.IEP_INT) + switch (ep) { + case 0: + if (USB->DIEPINT0_b.TC) { + retval |= 0x1; + USB->DIEPINT0 = BIT(0); + } + if (USB->DIEPINT0_b.BNA) { + retval |= 0x2; + USB->DIEPINT0 = BIT(9); + } + break; + case 1: + if (USB->DIEPINT1_b.TC) { + retval |= 0x1; + USB->DIEPINT1 = BIT(0); + } + if (USB->DIEPINT1_b.BNA) { + retval |= 0x2; + USB->DIEPINT1 = BIT(9); + } + break; + case 2: + if (USB->DIEPINT2_b.TC) { + retval |= 0x1; + USB->DIEPINT2 = BIT(0); + } + if (USB->DIEPINT2_b.BNA) { + retval |= 0x2; + USB->DIEPINT2 = BIT(9); + } + default: + break; + } + } else { + if (USB->GINTSTS_b.OEP_INT) + switch (ep) { + case 0: + if (USB->DOEPINT0_b.TC) { + retval |= 0x1; + USB->DOEPINT0 = BIT(0); + } + if (USB->DOEPINT0_b.SETUP) { + retval |= 0x4; + USB->DOEPINT0 = BIT(3); + } + break; + case 1: + if (USB->DOEPINT1_b.TC) { + retval |= 0x1; + USB->DOEPINT1 = BIT(0); + } + if (USB->DOEPINT1_b.BNA) { + retval |= 0x2; + USB->DOEPINT1 = BIT(9); + } + break; + case 2: + if (USB->DOEPINT2_b.TC) { + retval |= 0x1; + USB->DOEPINT2 = BIT(0); + } + if (USB->DOEPINT2_b.BNA) { + retval |= 0x2; + USB->DOEPINT2 = BIT(9); + } + break; + default: + break; + } + } + return retval; } void USB_INT_enOTG(BOOL en) { - USB->GINTEN_b.OTG_INT = en; + USB->GINTEN_b.OTG_INT = en; } BOOL USB_INT_isOTG() { - return USB->GINTSTS_b.OTG_INT ? TRUE : FALSE; + return USB->GINTSTS_b.OTG_INT ? TRUE : FALSE; } BOOL USB_INT_isOTGon(USB_INT_OTG otg) { - switch (otg) { - case USB_INT_OTG_SESEND: - return USB->GOTGINT_b.SES_END_DET ? TRUE : FALSE; - break; - case USB_INT_OTG_STANDAUP: - return USB->GOTGINT_b.A_DEV_TOUT_CHG ? TRUE : FALSE; - break; - case USB_INT_OTG_HNDETECT: - return USB->GOTGINT_b.HST_NEG_DET ? TRUE : FALSE; - break; - case USB_INT_OTG_HNSUCCHG: - return USB->GOTGINT_b.HST_NEG_SUC_STS_CHNG ? TRUE : FALSE; - break; - case USB_INT_OTG_KEEPAPP: - return USB->GOTGINT_b.DBNCE_DONE ? TRUE : FALSE; - break; - default: - break; - } - return FALSE; + switch (otg) { + case USB_INT_OTG_SESEND: + return USB->GOTGINT_b.SES_END_DET ? TRUE : FALSE; + break; + case USB_INT_OTG_STANDAUP: + return USB->GOTGINT_b.A_DEV_TOUT_CHG ? TRUE : FALSE; + break; + case USB_INT_OTG_HNDETECT: + return USB->GOTGINT_b.HST_NEG_DET ? TRUE : FALSE; + break; + case USB_INT_OTG_HNSUCCHG: + return USB->GOTGINT_b.HST_NEG_SUC_STS_CHNG ? TRUE : FALSE; + break; + case USB_INT_OTG_KEEPAPP: + return USB->GOTGINT_b.DBNCE_DONE ? TRUE : FALSE; + break; + default: + break; + } + return FALSE; } void USB_INT_clrOTGon(USB_INT_OTG otg) { - switch (otg) { - case USB_INT_OTG_SESEND: - USB->GOTGINT = BIT(2); - break; - case USB_INT_OTG_STANDAUP: - USB->GOTGINT = BIT(18); - break; - case USB_INT_OTG_HNDETECT: - USB->GOTGINT = BIT(17); - break; - case USB_INT_OTG_HNSUCCHG: - USB->GOTGINT = BIT(9); - break; - case USB_INT_OTG_KEEPAPP: - USB->GOTGINT = BIT(19); - break; - default: - break; - } + switch (otg) { + case USB_INT_OTG_SESEND: + USB->GOTGINT = BIT(2); + break; + case USB_INT_OTG_STANDAUP: + USB->GOTGINT = BIT(18); + break; + case USB_INT_OTG_HNDETECT: + USB->GOTGINT = BIT(17); + break; + case USB_INT_OTG_HNSUCCHG: + USB->GOTGINT = BIT(9); + break; + case USB_INT_OTG_KEEPAPP: + USB->GOTGINT = BIT(19); + break; + default: + break; + } } void USB_INT_enGP(USB_INT_GP name, BOOL en) { - switch (name) { - case USB_INT_GP_HOST_DISC: - USB->GINTEN_b.DD = en ? 1 : 0; - break; - case USB_INT_GP_DEV_RESET: - USB->GINTEN_b.USB_RST = en ? 1 : 0; - break; - case USB_INT_GP_DEV_ENUMDONE: - USB->GINTEN_b.ENUM_DONE = en ? 1 : 0; - break; - case USB_INT_GP_DEV_SUSP: - USB->GINTEN_b.USB_SUS = en ? 1 : 0; - break; - case USB_INT_GP_DEV_EARLY: - USB->GINTEN_b.EARLY_SUS = en ? 1 : 0; - break; - case USB_INT_GP_SOF: - USB->GINTEN_b.SOF = en ? 1 : 0; - break; - case USB_INT_GP_MIS: - USB->GINTEN_b.MODE_MIS = en ? 1 : 0; - break; - case USB_INT_GP_IDCHG: - USB->GINTEN_b.CIDSC = en ? 1 : 0; - break; - case USB_INT_GP_SESSREQ: - USB->GINTEN_b.SR = en ? 1 : 0; - break; - default: - break; - } + switch (name) { + case USB_INT_GP_HOST_DISC: + USB->GINTEN_b.DD = en ? 1 : 0; + break; + case USB_INT_GP_DEV_RESET: + USB->GINTEN_b.USB_RST = en ? 1 : 0; + break; + case USB_INT_GP_DEV_ENUMDONE: + USB->GINTEN_b.ENUM_DONE = en ? 1 : 0; + break; + case USB_INT_GP_DEV_SUSP: + USB->GINTEN_b.USB_SUS = en ? 1 : 0; + break; + case USB_INT_GP_DEV_EARLY: + USB->GINTEN_b.EARLY_SUS = en ? 1 : 0; + break; + case USB_INT_GP_SOF: + USB->GINTEN_b.SOF = en ? 1 : 0; + break; + case USB_INT_GP_MIS: + USB->GINTEN_b.MODE_MIS = en ? 1 : 0; + break; + case USB_INT_GP_IDCHG: + USB->GINTEN_b.CIDSC = en ? 1 : 0; + break; + case USB_INT_GP_SESSREQ: + USB->GINTEN_b.SR = en ? 1 : 0; + break; + default: + break; + } } BOOL USB_INT_isGP(USB_INT_GP name) { - switch (name) { - case USB_INT_GP_HOST_DISC: - return USB->GINTSTS_b.DD ? TRUE : FALSE; - break; - case USB_INT_GP_DEV_RESET: - return USB->GINTSTS_b.USB_RST ? TRUE : FALSE; - break; - case USB_INT_GP_DEV_ENUMDONE: - return USB->GINTSTS_b.ENUM_DONE ? TRUE : FALSE; - break; - case USB_INT_GP_DEV_SUSP: - return USB->GINTSTS_b.USB_SUS ? TRUE : FALSE; - break; - case USB_INT_GP_DEV_EARLY: - return USB->GINTSTS_b.EARLY_SUS ? TRUE : FALSE; - break; - case USB_INT_GP_SOF: - return USB->GINTSTS_b.SOF ? TRUE : FALSE; - break; - case USB_INT_GP_MIS: - return USB->GINTSTS_b.MODE_MIS ? TRUE : FALSE; - break; - case USB_INT_GP_IDCHG: - return USB->GINTSTS_b.CIDSC ? TRUE : FALSE; - break; - case USB_INT_GP_SESSREQ: - return USB->GINTSTS_b.SR ? TRUE : FALSE; - break; - default: - break; - } - return FALSE; + switch (name) { + case USB_INT_GP_HOST_DISC: + return USB->GINTSTS_b.DD ? TRUE : FALSE; + break; + case USB_INT_GP_DEV_RESET: + return USB->GINTSTS_b.USB_RST ? TRUE : FALSE; + break; + case USB_INT_GP_DEV_ENUMDONE: + return USB->GINTSTS_b.ENUM_DONE ? TRUE : FALSE; + break; + case USB_INT_GP_DEV_SUSP: + return USB->GINTSTS_b.USB_SUS ? TRUE : FALSE; + break; + case USB_INT_GP_DEV_EARLY: + return USB->GINTSTS_b.EARLY_SUS ? TRUE : FALSE; + break; + case USB_INT_GP_SOF: + return USB->GINTSTS_b.SOF ? TRUE : FALSE; + break; + case USB_INT_GP_MIS: + return USB->GINTSTS_b.MODE_MIS ? TRUE : FALSE; + break; + case USB_INT_GP_IDCHG: + return USB->GINTSTS_b.CIDSC ? TRUE : FALSE; + break; + case USB_INT_GP_SESSREQ: + return USB->GINTSTS_b.SR ? TRUE : FALSE; + break; + default: + break; + } + return FALSE; } void USB_INT_clrGP(USB_INT_GP name) { - switch (name) { - case USB_INT_GP_HOST_DISC: - USB->GINTSTS = BIT(29); - break; - case USB_INT_GP_DEV_RESET: - USB->GINTSTS = BIT(12); - break; - case USB_INT_GP_DEV_ENUMDONE: - USB->GINTSTS = BIT(13); - break; - case USB_INT_GP_DEV_SUSP: - USB->GINTSTS = BIT(11); - break; - case USB_INT_GP_DEV_EARLY: - USB->GINTSTS = BIT(10); - break; - case USB_INT_GP_SOF: - USB->GINTSTS = BIT(3); - break; - case USB_INT_GP_MIS: - USB->GINTSTS = BIT(1); - break; - case USB_INT_GP_IDCHG: - USB->GINTSTS = BIT(28); - break; - case USB_INT_GP_SESSREQ: - USB->GINTSTS = BIT(30); - break; - default: - break; - } + switch (name) { + case USB_INT_GP_HOST_DISC: + USB->GINTSTS = BIT(29); + break; + case USB_INT_GP_DEV_RESET: + USB->GINTSTS = BIT(12); + break; + case USB_INT_GP_DEV_ENUMDONE: + USB->GINTSTS = BIT(13); + break; + case USB_INT_GP_DEV_SUSP: + USB->GINTSTS = BIT(11); + break; + case USB_INT_GP_DEV_EARLY: + USB->GINTSTS = BIT(10); + break; + case USB_INT_GP_SOF: + USB->GINTSTS = BIT(3); + break; + case USB_INT_GP_MIS: + USB->GINTSTS = BIT(1); + break; + case USB_INT_GP_IDCHG: + USB->GINTSTS = BIT(28); + break; + case USB_INT_GP_SESSREQ: + USB->GINTSTS = BIT(30); + break; + default: + break; + } } BOOL USB_otgControl(USB_OTG_CTL ctl, BOOL val) { - BOOL retval = FALSE; - switch (ctl) { - case USB_OTG_DEV_HNSUCC: - retval = USB->GOTGCTL_b.HST_NEG_SCS ? TRUE : FALSE; - break; - case USB_OTG_DEV_HNPREQ: - retval = USB->GOTGCTL_b.HNP_REQ ? TRUE : FALSE; - USB->GOTGCTL_b.HNP_REQ = val ? 1 : 0; - break; - case USB_OTG_HST_HNPENABLE: - retval = USB->GOTGCTL_b.HST_SET_HNP_EN ? TRUE : FALSE; - USB->GOTGCTL_b.HST_SET_HNP_EN = val ? 1 : 0; - break; - case USB_OTG_DEV_HNPENABLE: - retval = USB->GOTGCTL_b.DEV_HNP_EN ? TRUE : FALSE; - USB->GOTGCTL_b.DEV_HNP_EN = val ? 1 : 0; - break; - default: - break; - } - return retval; + BOOL retval = FALSE; + switch (ctl) { + case USB_OTG_DEV_HNSUCC: + retval = USB->GOTGCTL_b.HST_NEG_SCS ? TRUE : FALSE; + break; + case USB_OTG_DEV_HNPREQ: + retval = USB->GOTGCTL_b.HNP_REQ ? TRUE : FALSE; + USB->GOTGCTL_b.HNP_REQ = val ? 1 : 0; + break; + case USB_OTG_HST_HNPENABLE: + retval = USB->GOTGCTL_b.HST_SET_HNP_EN ? TRUE : FALSE; + USB->GOTGCTL_b.HST_SET_HNP_EN = val ? 1 : 0; + break; + case USB_OTG_DEV_HNPENABLE: + retval = USB->GOTGCTL_b.DEV_HNP_EN ? TRUE : FALSE; + USB->GOTGCTL_b.DEV_HNP_EN = val ? 1 : 0; + break; + default: + break; + } + return retval; } diff --git a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c index 8ac809caf9..f1517a232f 100644 --- a/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c +++ b/bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c @@ -1,63 +1,63 @@ /** - ***************************************************************************** - * @file cmem7_wdg.c - * - * @brief CMEM7 watchdog source file - * - * - * @version V1.0 - * @date 3. September 2013 - * - * @note - * - ***************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, - * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> - ***************************************************************************** - */ - + ***************************************************************************** + * @file cmem7_wdg.c + * + * @brief CMEM7 watchdog source file + * + * + * @version V1.0 + * @date 3. September 2013 + * + * @note + * + ***************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, + * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2> + ***************************************************************************** + */ + #include "cmem7_wdg.h" static uint32_t wdg_GetClock() { - return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.WDG_CLK + 1)); + return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.WDG_CLK + 1)); } void WDG_DeInit(void){ SOFT_RESET->SOFTRST_b.WDT_n = 0; - SOFT_RESET->SOFTRST_b.WDT_n = 1; + SOFT_RESET->SOFTRST_b.WDT_n = 1; } void WDG_Init(uint8_t trigger, uint16_t ResetMillSecond) { - assert_param(IS_WDG_TRIGGER_MODE(trigger)); - - WDG->INT_CTRL_b.TRIGGER_MODE = trigger; - WDG->LEN = ((uint64_t)wdg_GetClock()) * ResetMillSecond / 1000; + assert_param(IS_WDG_TRIGGER_MODE(trigger)); + + WDG->INT_CTRL_b.TRIGGER_MODE = trigger; + WDG->LEN = ((uint64_t)wdg_GetClock()) * ResetMillSecond / 1000; } void WDG_ITConfig(uint8_t Int, BOOL Enable) { - assert_param(IS_WDG_INT(Int)); - - WDG->CTRL_b.INT_LEN = Int; - WDG->INT_CTRL_b.MASK = !Enable; + assert_param(IS_WDG_INT(Int)); + + WDG->CTRL_b.INT_LEN = Int; + WDG->INT_CTRL_b.MASK = !Enable; } BOOL WDG_GetITStatus() { - return (WDG->INT_STA_b.STA == 1) ? TRUE : FALSE; + return (WDG->INT_STA_b.STA == 1) ? TRUE : FALSE; } void WDG_ClearITPendingBit() { - WDG->INT_STA_b.STA = 1; + WDG->INT_STA_b.STA = 1; } void WDG_Cmd(BOOL Enable) { - WDG->CTRL_b.EN = Enable; + WDG->CTRL_b.EN = Enable; } |