diff options
| author | Isaac Rose <[email protected]> | 2022-08-07 23:22:36 -0400 |
|---|---|---|
| committer | Man, Jianting (Meco) <[email protected]> | 2022-08-08 01:30:39 -0400 |
| commit | c49c5a4d06598325015954623ff495dd7a4c56c9 (patch) | |
| tree | 50d54517337f781609a5efe0c39218c671a04fef | |
| parent | e61d05ca1a9e6b8a83c928ab1f893246629bbd2f (diff) | |
Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.
| -rw-r--r-- | bsp/imxrt/imxrt1060-nxp-evk/board/board.c | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/bsp/imxrt/imxrt1060-nxp-evk/board/board.c b/bsp/imxrt/imxrt1060-nxp-evk/board/board.c index 59eb64e3e7..2b0e6ee7a5 100644 --- a/bsp/imxrt/imxrt1060-nxp-evk/board/board.c +++ b/bsp/imxrt/imxrt1060-nxp-evk/board/board.c @@ -450,6 +450,9 @@ static void imxrt_lcd_pins_init(void) IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 is configured as GPIO1_IO02 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( + IOMUXC_GPIO_AD_B0_11_GPIO1_IO11, /* GPIO_AD_B0_11 is configured as GPIO1_IO11 */ + 0U); /* Software Input On Field: Input Path is determined by functionality */ + IOMUXC_SetPinMux( IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( @@ -523,6 +526,16 @@ static void imxrt_lcd_pins_init(void) Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( + IOMUXC_GPIO_AD_B0_11_GPIO1_IO11, /* GPIO_AD_B0_11 PAD functional properties : */ + 0x10B0u); /* Slew Rate Field: Slow Slew Rate + Drive Strength Field: R0/6 + Speed Field: medium(100MHz) + Open Drain Enable Field: Open Drain Disabled + Pull / Keep Enable Field: Pull/Keeper Enabled + Pull / Keep Select Field: Keeper + Pull Up / Down Config. Field: 100K Ohm Pull Down + Hyst. Enable Field: Hysteresis Disabled */ + IOMUXC_SetPinConfig( IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */ 0x10B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 |