修改kconfig，目前只保留验证RTC配置

1 files changed, 0 insertions, 242 deletions

diff --git a/bsp/stm32/stm32h750-artpi-h750/board/Kconfig b/bsp/stm32/stm32h750-artpi-h750/board/Kconfig
index e496d3f2db..34ce12d8bf 100644
--- a/bsp/stm32/stm32h750-artpi-h750/board/Kconfig
+++ b/bsp/stm32/stm32h750-artpi-h750/board/Kconfig
@@ -15,66 +15,6 @@ menu "Onboard Peripheral Drivers"
         select BSP_USING_UART4
         default n
 
-    config BSP_USING_SPI_FLASH
-        bool "Enable SPI FLASH (spi1)"
-        select BSP_USING_SPI
-        select BSP_USING_SPI1
-        select PKG_USING_FAL
-        select FAL_USING_SFUD_PORT
-        select RT_USING_SFUD
-        default n
-        
-    config BSP_USING_QSPI_FLASH
-        bool "Enable QSPI FLASH (w25q64 qspi)"
-        select BSP_USING_QSPI
-        select FAL_USING_SFUD_PORT
-        select RT_USING_SFUD
-        select RT_SFUD_USING_QSPI
-        default n
-
-    config BSP_USING_WIFI
-        bool "Enable wifi (AP6212)"
-        select ART_PI_USING_WIFI_6212_LIB
-        select ART_PI_USING_OTA_LIB
-        select BSP_USING_SPI_FLASH
-        select RT_USING_WIFI
-        select RT_USING_SAL
-        default n
-
-    config BSP_USING_OV2640
-        bool "Enable camera (ov2640)"
-        select BSP_USING_DCMI
-        select BSP_USING_I2C
-        select BSP_USING_I2C2
-        default n
-
-    config BSP_USING_GC0328C
-        bool "Enable camera (gc0328)"
-        select BSP_USING_DCMI
-        select BSP_USING_I2C
-        select BSP_USING_I2C2
-        default n
-
-    menuconfig BSP_USING_FS
-        bool "Enable filesystem"
-        select RT_USING_DFS
-        select RT_USING_DFS_ROMFS
-        default n
-        if BSP_USING_FS
-            config BSP_USING_SDCARD_FS
-                bool "Enable SDCARD filesystem"
-                select BSP_USING_SDIO
-                select BSP_USING_SDIO1
-                select RT_USING_DFS_ELMFAT
-                default n
-            config BSP_USING_SPI_FLASH_FS
-                bool "Enable SPI FLASH filesystem"
-                select BSP_USING_SPI_FLASH
-                select RT_USING_MTD_NOR
-                select PKG_USING_LITTLEFS
-                default n
-        endif
-
 endmenu
 
 menu "On-chip Peripheral Drivers"
@@ -117,188 +57,6 @@ menu "On-chip Peripheral Drivers"
                 default n
         endif
 
-    menuconfig BSP_USING_SPI
-        bool "Enable SPI"
-        default n
-        select RT_USING_SPI
-        if BSP_USING_SPI
-            config BSP_USING_SPI1
-                bool "Enable SPI1"
-                default n
-            config BSP_USING_SPI2
-                bool "Enable SPI2"
-                default n
-            config BSP_USING_SPI4
-                bool "Enable SPI4"
-                default n
-        endif
-        
-    config BSP_USING_QSPI
-        bool "Enable QSPI BUS"
-        select RT_USING_QSPI
-        select RT_USING_SPI
-        default n
-
-    menuconfig BSP_USING_I2C
-        bool "Enable I2C BUS (software simulation)"
-        select RT_USING_I2C
-        select RT_USING_I2C_BITOPS
-        select RT_USING_PIN
-        default n
-        if BSP_USING_I2C
-            menuconfig BSP_USING_I2C1
-                bool "Enable I2C1 BUS (software simulation)"
-                default n
-                select RT_USING_I2C
-                select RT_USING_I2C_BITOPS
-                select RT_USING_PIN
-                if BSP_USING_I2C1
-                    comment "Notice: PB6 --> 22; PB7 --> 23" 
-                    config BSP_I2C1_SCL_PIN
-                        int "I2C1 scl pin number"
-                        range 0 175
-                        default 22
-                    config BSP_I2C1_SDA_PIN
-                        int "I2C1 sda pin number"
-                        range 0 175
-                        default 23
-                endif
-            menuconfig BSP_USING_I2C2
-                bool "Enable I2C2 BUS (software simulation)"
-                default n
-                if BSP_USING_I2C2
-                    comment "Notice: PH13 --> 125; PH15 --> 127"
-                    config BSP_I2C2_SCL_PIN
-                        int "i2c2 scl pin number"
-                        range 1 176
-                        default 127
-                    config BSP_I2C2_SDA_PIN
-                        int "I2C2 sda pin number"
-                        range 0 175
-                        default 125
-                endif
-            menuconfig BSP_USING_I2C3
-                bool "Enable I2C3 BUS (software simulation)"
-                default n
-                if BSP_USING_I2C3
-                    comment "Notice: PH12 --> 124; PH11 --> 123"
-                    config BSP_I2C3_SCL_PIN
-                        int "i2c3 scl pin number"
-                        range 0 175
-                        default 123
-                    config BSP_I2C3_SDA_PIN
-                        int "I2C3 sda pin number"
-                        range 0 175
-                        default 124
-                endif
-        endif
-		
-    menuconfig BSP_USING_SDIO
-        bool "Enable SDIO"
-        default n
-        select RT_USING_SDIO
-        if BSP_USING_SDIO
-            config BSP_USING_SDIO1
-                bool "Enable SDIO1"
-                default n
-            config BSP_USING_SDIO2
-                bool "Enable SDIO2"
-                default n
-        endif
-
-    config BSP_USING_SDRAM
-        bool "Enable SDRAM"
-        default n
-
-    menuconfig BSP_USING_ETH
-        bool "Enable Ethernet"
-        default n        
-        select RT_USING_LWIP
-        if BSP_USING_ETH
-            config ETH_RESET_PIN
-                string "ETH RESET PIN"
-                default "PA.3"
-        endif
-        if BSP_USING_ETH
-            choice
-                prompt "Choose ETH PHY"
-                default PHY_USING_LAN8720A
-                        config PHY_USING_LAN8720A
-                    bool "USING LAN8720A"
-                    default n
-            endchoice
-        endif
-
-    config BSP_USING_LCD
-        bool "Enable LCD"
-        select BSP_USING_GPIO
-        select BSP_USING_SDRAM
-        select RT_USING_MEMHEAP
-        default n
-
-    config BSP_USING_DCMI
-        bool "Enable DCMI"
-        default n
-        
-    menuconfig BSP_USING_FDCAN
-        bool "Enable FDCAN"
-        default n
-        select RT_USING_CAN
-        if BSP_USING_FDCAN
-            config BSP_USING_FDCAN1
-                bool "USING FDCAN1"
-                default n
-        endif
-        
-    config BSP_USING_USBD
-        bool "Enable USB Device"
-        select RT_USING_USB_DEVICE
-        default n
-        
-    menuconfig BSP_USING_USBH
-        bool "Enable USB Host"
-        select RT_USING_USB_HOST
-        default n
-        if BSP_USING_USBH
-            menuconfig RT_USBH_MSTORAGE
-                bool "Enable Udisk Drivers"
-                select RT_USING_DFS
-                select RT_USING_DFS_ELMFAT
-                default n
-                if RT_USBH_MSTORAGE
-                    config UDISK_MOUNTPOINT
-                        string "Udisk mount dir"
-                        default "/"
-                endif
-        endif
-        
-    menuconfig BSP_USING_TIM
-        bool "Enable timer"
-        default n
-        select RT_USING_HWTIMER
-        if BSP_USING_TIM
-            config BSP_USING_TIM13
-                bool "Enable TIM13"
-                default n
-        endif
-
-    menuconfig BSP_USING_PWM
-        bool "Enable PWM"
-        default n
-        select RT_USING_PWM
-        if BSP_USING_PWM
-        menuconfig BSP_USING_PWM5
-            bool "Enable Timer5 output pwm"
-            default n
-            if BSP_USING_PWM5
-                config BSP_USING_PWM5_CH1
-                    bool "Enable PWM5 channel1"
-                    default n
-            endif
-        config SAMPLES_USING_PWM
-            bool "SAMPLE PWM5 channel1"
-            default n
-        endif
 
     config BSP_USING_ONCHIP_RTC
         bool "Enable Onchip RTC"