README for AVR32UC3B0: Initial commit

3 files changed, 107 insertions, 0 deletions

diff --git a/bsp/avr32uc3b0/README.md b/bsp/avr32uc3b0/README.md
new file mode 100644
index 0000000000..8896cfbbf3
--- /dev/null
+++ b/bsp/avr32uc3b0/README.md
@@ -0,0 +1,107 @@
+# MCUZone AT32UC3B0256 mini development board
+
+## Introduction
+
+**The AVR32 is a high performance, low power 32-bit Atmel AVR
+microcontroller.** This board support package supports the MCUZone
+AVR32 mini development board (also known as the AVR32DEV1). The
+development board uses the AT32UC3B0256 microcontroller.
+
+![board-snap](figures/board-snap.png)
+
+Note: Unfortunately, the online link for the development board (both
+MCUZone OR Aliexpress) doesn't work. I don't have access to the
+schematic (OR Gerber information) for this development kit. I used a
+multimeter to look for the connected pins. If you - the reader - do
+have access to the schematic/pinouts, could you please reach out to
+me?
+
+This README is essentially a work-in-progress. I will try to map the
+berg rows (J1 and J2) and document them as and when I further the
+device driver base for the target.
+
+If you feel like reaching out to me for questions pertaining to the
+target development board, you can write to me: ramangopalan AT gmail
+dot com.
+
+## Supported compiler
+
+This BSP is built with the AVR32 GCC that comes with the Microchip
+Studio. I am using the Microchip Studio version 7.0.2594. Make sure
+that avr32-gcc.exe is visible on your command line. Add the binary
+directory to you PATH. Yes, on Windows. Sorry :(
+
+![env-windows-avr32-gcc](figures/env-windows-avr32-gcc.png)
+
+I use Git Bash (Windows) for compiling the RT-Thread system. Once you
+set your path correctly, invoke Git Bash to query avr32-gcc.exe's
+version. The output should look similar to this:
+
+```bash
+$ avr32-gcc.exe --version
+avr32-gcc.exe (AVR_32_bit_GNU_Toolchain_3.4.2_435) 4.4.7
+Copyright (C) 2010 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+```
+
+If you see this, you're all set to compile RT-Thread for AT32UC3B0256.
+
+## Program firmware
+
+### Step 1: download the RT-Thread codebase and navigate to bsp/avr32uc3b0.
+
+```bash
+$ cd bsp/avr32uc3b0/
+```
+
+### Step 2: build
+
+```bash
+scons -c
+scons
+```
+
+### Step 3: flash
+
+If everything went well, scons should have generated an elf file:
+rtthread-uc3b0256.elf. Let us program the file. The program `atprogram'
+comes with Microchip Studio. I didn't have to do much here. Just make sure
+`atprogram.exe' is in your PATH.
+
+```bash
+atprogram -t atmelice -i jtag -d at32uc3a0512 program -f rtthread-uc3b0256.elf
+```
+
+Note that you should already see the on-board LEDs (PA7, PA8) blink if your
+programming was successful. I use the Atmel ICE programmer. To access
+msh, you'll need an FTDI breakout board. Connect the target board to
+the FTDI breakout with jumper wires:
+
+- GND (FTDI) to GND (development board)
+- RX (FTDI) to J2, pin 10.
+- TX (FTDI) to J2, pin 7.
+
+## Running Result
+
+The output information on serial port for `ps' the command should look like this:
+
+```bash
+0x000003c0 tidle0    31  ready   0x00000054 0x00000100    67%   0x00000009 OK
+0x00001650 tshell    20  running 0x000000b4 0x00001000    13%   0x0000000a OK
+0x00000ac4 led2       5  suspend 0x0000007c 0x00000400    12%   0x0000000a EINTRPT
+0x00001350 led1       5  suspend 0x0000007c 0x00000400    12%   0x00000005 EINTRPT
+```
+
+## Peripheral Support
+
+| Drive | Support | Remark  |
+| ----- | ------- | ------- |
+| UART  | Support | UART0/1 |
+| GPIO  | -       | -       |
+| I2C   | -       | -       |
+| RTC   | -       | -       |
+| SPI   | -       | -       |
+| TIMER | -       | -       |
+| WDT   | -       | -       |
+
diff --git a/bsp/avr32uc3b0/figures/board-snap.png b/bsp/avr32uc3b0/figures/board-snap.png
new file mode 100644
index 0000000000..8f7bd47182
--- /dev/null
+++ b/bsp/avr32uc3b0/figures/board-snap.png
diff --git a/bsp/avr32uc3b0/figures/env-windows-avr32-gcc.png b/bsp/avr32uc3b0/figures/env-windows-avr32-gcc.png
new file mode 100644
index 0000000000..01a43a5a02
--- /dev/null
+++ b/bsp/avr32uc3b0/figures/env-windows-avr32-gcc.png