[bsp] Update BSP configuration file for netdev components

Signed-off-by: chenyong <[email protected]>

2 files changed, 39 insertions, 168 deletions

diff --git a/bsp/qemu-vexpress-a9/.config b/bsp/qemu-vexpress-a9/.config
index 6fde000858..89af9574b7 100644
--- a/bsp/qemu-vexpress-a9/.config
+++ b/bsp/qemu-vexpress-a9/.config
@@ -7,6 +7,7 @@
 # RT-Thread Kernel
 #
 CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 CONFIG_RT_USING_SMP=y
 CONFIG_RT_CPUS_NR=2
 CONFIG_RT_ALIGN_SIZE=4
@@ -143,6 +144,9 @@ CONFIG_RT_USING_DFS_RAMFS=y
 #
 CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
+CONFIG_RT_USING_SYSTEM_WORKQUEUE=y
+CONFIG_RT_SYSTEM_WORKQUEUE_STACKSIZE=2048
+CONFIG_RT_SYSTEM_WORKQUEUE_PRIORITY=23
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_SERIAL_USING_DMA=y
 CONFIG_RT_SERIAL_RB_BUFSZ=64
@@ -160,6 +164,7 @@ CONFIG_RT_MTD_NAND_DEBUG=y
 # CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
 CONFIG_RT_USING_RTC=y
+# CONFIG_RT_USING_ALARM is not set
 CONFIG_RT_USING_SOFT_RTC=y
 CONFIG_RT_USING_SDIO=y
 CONFIG_RT_SDIO_STACK_SIZE=512
@@ -220,7 +225,14 @@ CONFIG_RT_USING_SAL=y
 #
 CONFIG_SAL_USING_LWIP=y
 CONFIG_SAL_USING_POSIX=y
-CONFIG_SAL_PROTO_FAMILIES_NUM=4
+
+#
+# Network interface device
+#
+CONFIG_RT_USING_NETDEV=y
+CONFIG_NETDEV_USING_IFCONFIG=y
+CONFIG_NETDEV_USING_PING=y
+CONFIG_NETDEV_USING_NETSTAT=y
 
 #
 # light weight TCP/IP stack
@@ -229,7 +241,6 @@ CONFIG_RT_USING_LWIP=y
 # CONFIG_RT_USING_LWIP141 is not set
 CONFIG_RT_USING_LWIP202=y
 # CONFIG_RT_USING_LWIP210 is not set
-CONFIG_RT_USING_LWIP_IPV6=y
 # CONFIG_RT_LWIP_IGMP is not set
 CONFIG_RT_LWIP_ICMP=y
 # CONFIG_RT_LWIP_SNMP is not set
@@ -246,7 +257,7 @@ CONFIG_RT_LWIP_GWADDR="192.168.1.1"
 CONFIG_RT_LWIP_MSKADDR="255.255.255.0"
 CONFIG_RT_LWIP_UDP=y
 CONFIG_RT_LWIP_TCP=y
-# CONFIG_RT_LWIP_RAW is not set
+CONFIG_RT_LWIP_RAW=y
 # CONFIG_RT_LWIP_PPP is not set
 CONFIG_RT_MEMP_NUM_NETCONN=8
 CONFIG_RT_LWIP_PBUF_NUM=16
@@ -266,6 +277,7 @@ CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
 CONFIG_RT_LWIP_REASSEMBLY_FRAG=y
 CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
+CONFIG_LWIP_NETIF_LINK_CALLBACK=1
 CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
@@ -273,6 +285,8 @@ CONFIG_LWIP_SO_RCVBUF=1
 # CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
 CONFIG_LWIP_NETIF_LOOPBACK=0
 # CONFIG_RT_LWIP_STATS is not set
+# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
+CONFIG_RT_LWIP_USING_PING=y
 # CONFIG_RT_LWIP_DEBUG is not set
 
 #
@@ -377,6 +391,7 @@ CONFIG_RT_USING_LWP=y
 #
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
 
 #
 # tools packages
@@ -406,22 +421,12 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
 
 #
 # peripheral libraries and drivers
 #
-
-#
-# sensors drivers
-#
-# CONFIG_PKG_USING_LSM6DSL is not set
-# CONFIG_PKG_USING_LPS22HB is not set
-# CONFIG_PKG_USING_HTS221 is not set
-# CONFIG_PKG_USING_LSM303AGR is not set
-# CONFIG_PKG_USING_BME280 is not set
-# CONFIG_PKG_USING_BMA400 is not set
-# CONFIG_PKG_USING_BMI160_BMX160 is not set
-# CONFIG_PKG_USING_SPL0601 is not set
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_AHT10 is not set
@@ -433,7 +438,12 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
 # CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AT24CXX is not set
 
 #
 # miscellaneous packages
@@ -459,6 +469,7 @@ CONFIG_RT_USING_LWP=y
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
 CONFIG_SOC_VEXPRESS_A9=y
 CONFIG_RT_USING_UART0=y
 CONFIG_RT_USING_UART1=y
diff --git a/bsp/qemu-vexpress-a9/rtconfig.h b/bsp/qemu-vexpress-a9/rtconfig.h
index 831d54c52f..a94dd3d4b7 100644
--- a/bsp/qemu-vexpress-a9/rtconfig.h
+++ b/bsp/qemu-vexpress-a9/rtconfig.h
@@ -10,9 +10,7 @@
 #define RT_USING_SMP
 #define RT_CPUS_NR 2
 #define RT_ALIGN_SIZE 4
-/* RT_THREAD_PRIORITY_8 is not set */
 #define RT_THREAD_PRIORITY_32
-/* RT_THREAD_PRIORITY_256 is not set */
 #define RT_THREAD_PRIORITY_MAX 32
 #define RT_TICK_PER_SECOND 100
 #define RT_USING_OVERFLOW_CHECK
@@ -39,10 +37,7 @@
 
 #define RT_USING_MEMPOOL
 #define RT_USING_MEMHEAP
-/* RT_USING_NOHEAP is not set */
 #define RT_USING_SMALL_MEM
-/* RT_USING_SLAB is not set */
-/* RT_USING_MEMHEAP_AS_HEAP is not set */
 #define RT_USING_MEMTRACE
 #define RT_USING_HEAP
 
@@ -58,7 +53,6 @@
 #define ARCH_ARM
 #define ARCH_ARM_CORTEX_A
 #define ARCH_ARM_CORTEX_A9
-/* ARCH_CPU_STACK_GROWS_UPWARD is not set */
 
 /* RT-Thread Components */
 
@@ -79,14 +73,11 @@
 #define FINSH_HISTORY_LINES 5
 #define FINSH_USING_SYMTAB
 #define FINSH_USING_DESCRIPTION
-/* FINSH_ECHO_DISABLE_DEFAULT is not set */
 #define FINSH_THREAD_PRIORITY 20
 #define FINSH_THREAD_STACK_SIZE 4096
 #define FINSH_CMD_SIZE 80
-/* FINSH_USING_AUTH is not set */
 #define FINSH_USING_MSH
 #define FINSH_USING_MSH_DEFAULT
-/* FINSH_USING_MSH_ONLY is not set */
 #define FINSH_ARG_MAX 10
 
 /* Device virtual file system */
@@ -96,50 +87,38 @@
 #define DFS_FILESYSTEMS_MAX 2
 #define DFS_FILESYSTEM_TYPES_MAX 8
 #define DFS_FD_MAX 16
-/* RT_USING_DFS_MNTTABLE is not set */
 #define RT_USING_DFS_ELMFAT
 
 /* elm-chan's FatFs, Generic FAT Filesystem Module */
 
 #define RT_DFS_ELM_CODE_PAGE 437
 #define RT_DFS_ELM_WORD_ACCESS
-/* RT_DFS_ELM_USE_LFN_0 is not set */
-/* RT_DFS_ELM_USE_LFN_1 is not set */
-/* RT_DFS_ELM_USE_LFN_2 is not set */
 #define RT_DFS_ELM_USE_LFN_3
 #define RT_DFS_ELM_USE_LFN 3
 #define RT_DFS_ELM_MAX_LFN 255
 #define RT_DFS_ELM_DRIVES 2
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 4096
-/* RT_DFS_ELM_USE_ERASE is not set */
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
 #define RT_USING_DFS_ROMFS
 #define RT_USING_DFS_RAMFS
-/* RT_USING_DFS_UFFS is not set */
-/* RT_USING_DFS_JFFS2 is not set */
-/* RT_USING_DFS_NFS is not set */
 
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
+#define RT_USING_SYSTEM_WORKQUEUE
+#define RT_SYSTEM_WORKQUEUE_STACKSIZE 2048
+#define RT_SYSTEM_WORKQUEUE_PRIORITY 23
 #define RT_USING_SERIAL
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
-/* RT_USING_CAN is not set */
-/* RT_USING_HWTIMER is not set */
-/* RT_USING_CPUTIME is not set */
 #define RT_USING_I2C
 #define RT_USING_I2C_BITOPS
 #define RT_USING_PIN
-/* RT_USING_ADC is not set */
-/* RT_USING_PWM is not set */
 #define RT_USING_MTD_NOR
 #define RT_USING_MTD_NAND
 #define RT_MTD_NAND_DEBUG
-/* RT_USING_MTD is not set */
-/* RT_USING_PM is not set */
 #define RT_USING_RTC
 #define RT_USING_SOFT_RTC
 #define RT_USING_SDIO
@@ -148,31 +127,18 @@
 #define RT_MMCSD_STACK_SIZE 1024
 #define RT_MMCSD_THREAD_PREORITY 22
 #define RT_MMCSD_MAX_PARTITION 16
-/* RT_SDIO_DEBUG is not set */
 #define RT_USING_SPI
-/* RT_USING_QSPI is not set */
 #define RT_USING_SPI_MSD
 #define RT_USING_SFUD
 #define RT_SFUD_USING_SFDP
 #define RT_SFUD_USING_FLASH_INFO_TABLE
-/* RT_SFUD_USING_QSPI is not set */
-/* RT_DEBUG_SFUD is not set */
-/* RT_USING_W25QXX is not set */
-/* RT_USING_GD is not set */
-/* RT_USING_ENC28J60 is not set */
-/* RT_USING_SPI_WIFI is not set */
 #define RT_USING_WDT
-/* RT_USING_AUDIO is not set */
-/* RT_USING_SENSOR is not set */
 
 /* Using WiFi */
 
-/* RT_USING_WIFI is not set */
 
 /* Using USB */
 
-/* RT_USING_USB_HOST is not set */
-/* RT_USING_USB_DEVICE is not set */
 
 /* POSIX layer and C standard library */
 
@@ -182,7 +148,6 @@
 #define RT_USING_POSIX_MMAP
 #define RT_USING_POSIX_TERMIOS
 #define RT_USING_POSIX_AIO
-/* RT_USING_MODULE is not set */
 
 /* Network */
 
@@ -194,18 +159,19 @@
 
 #define SAL_USING_LWIP
 #define SAL_USING_POSIX
-#define SAL_PROTO_FAMILIES_NUM 4
+
+/* Network interface device */
+
+#define RT_USING_NETDEV
+#define NETDEV_USING_IFCONFIG
+#define NETDEV_USING_PING
+#define NETDEV_USING_NETSTAT
 
 /* light weight TCP/IP stack */
 
 #define RT_USING_LWIP
-/* RT_USING_LWIP141 is not set */
 #define RT_USING_LWIP202
-/* RT_USING_LWIP210 is not set */
-#define RT_USING_LWIP_IPV6
-/* RT_LWIP_IGMP is not set */
 #define RT_LWIP_ICMP
-/* RT_LWIP_SNMP is not set */
 #define RT_LWIP_DNS
 #define RT_LWIP_DHCP
 #define IP_SOF_BROADCAST 1
@@ -218,8 +184,7 @@
 #define RT_LWIP_MSKADDR "255.255.255.0"
 #define RT_LWIP_UDP
 #define RT_LWIP_TCP
-/* RT_LWIP_RAW is not set */
-/* RT_LWIP_PPP is not set */
+#define RT_LWIP_RAW
 #define RT_MEMP_NUM_NETCONN 8
 #define RT_LWIP_PBUF_NUM 16
 #define RT_LWIP_RAW_PCB_NUM 4
@@ -231,175 +196,71 @@
 #define RT_LWIP_TCPTHREAD_PRIORITY 10
 #define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
 #define RT_LWIP_TCPTHREAD_STACKSIZE 1024
-/* LWIP_NO_RX_THREAD is not set */
-/* LWIP_NO_TX_THREAD is not set */
 #define RT_LWIP_ETHTHREAD_PRIORITY 12
 #define RT_LWIP_ETHTHREAD_STACKSIZE 1024
 #define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
 #define RT_LWIP_REASSEMBLY_FRAG
 #define LWIP_NETIF_STATUS_CALLBACK 1
+#define LWIP_NETIF_LINK_CALLBACK 1
 #define SO_REUSE 1
 #define LWIP_SO_RCVTIMEO 1
 #define LWIP_SO_SNDTIMEO 1
 #define LWIP_SO_RCVBUF 1
-/* RT_LWIP_NETIF_LOOPBACK is not set */
 #define LWIP_NETIF_LOOPBACK 0
-/* RT_LWIP_STATS is not set */
-/* RT_LWIP_DEBUG is not set */
+#define RT_LWIP_USING_PING
 
 /* Modbus master and slave stack */
 
-/* RT_USING_MODBUS is not set */
 
 /* AT commands */
 
-/* RT_USING_AT is not set */
-/* LWIP_USING_DHCPD is not set */
 
 /* VBUS(Virtual Software BUS) */
 
-/* RT_USING_VBUS is not set */
 
 /* Utilities */
 
 #define RT_USING_LOGTRACE
 #define LOG_TRACE_MAX_SESSION 16
-/* LOG_TRACE_USING_LEVEL_NOTRACE is not set */
-/* LOG_TRACE_USING_LEVEL_ERROR is not set */
-/* LOG_TRACE_USING_LEVEL_WARNING is not set */
 #define LOG_TRACE_USING_LEVEL_INFO
-/* LOG_TRACE_USING_LEVEL_VERBOSE is not set */
-/* LOG_TRACE_USING_LEVEL_DEBUG is not set */
-/* LOG_TRACE_USING_MEMLOG is not set */
-/* RT_USING_RYM is not set */
-/* RT_USING_ULOG is not set */
-/* RT_USING_UTEST is not set */
 #define RT_USING_LWP
 
 /* RT-Thread online packages */
 
 /* IoT - internet of things */
 
-/* PKG_USING_PAHOMQTT is not set */
-/* PKG_USING_WEBCLIENT is not set */
-/* PKG_USING_WEBNET is not set */
-/* PKG_USING_MONGOOSE is not set */
-/* PKG_USING_WEBTERMINAL is not set */
-/* PKG_USING_CJSON is not set */
-/* PKG_USING_JSMN is not set */
-/* PKG_USING_LIBMODBUS is not set */
-/* PKG_USING_LJSON is not set */
-/* PKG_USING_EZXML is not set */
-/* PKG_USING_NANOPB is not set */
 
 /* Wi-Fi */
 
 /* Marvell WiFi */
 
-/* PKG_USING_WLANMARVELL is not set */
 
 /* Wiced WiFi */
 
-/* PKG_USING_WLAN_WICED is not set */
-/* PKG_USING_RW007 is not set */
-/* PKG_USING_COAP is not set */
-/* PKG_USING_NOPOLL is not set */
-/* PKG_USING_NETUTILS is not set */
-/* PKG_USING_AT_DEVICE is not set */
-/* PKG_USING_WIZNET is not set */
 
 /* IoT Cloud */
 
-/* PKG_USING_ONENET is not set */
-/* PKG_USING_GAGENT_CLOUD is not set */
-/* PKG_USING_ALI_IOTKIT is not set */
-/* PKG_USING_AZURE is not set */
-/* PKG_USING_TENCENT_IOTKIT is not set */
-/* PKG_USING_NIMBLE is not set */
-/* PKG_USING_OTA_DOWNLOADER is not set */
 
 /* security packages */
 
-/* PKG_USING_MBEDTLS is not set */
-/* PKG_USING_libsodium is not set */
-/* PKG_USING_TINYCRYPT is not set */
 
 /* language packages */
 
-/* PKG_USING_LUA is not set */
-/* PKG_USING_JERRYSCRIPT is not set */
-/* PKG_USING_MICROPYTHON is not set */
 
 /* multimedia packages */
 
-/* PKG_USING_OPENMV is not set */
-/* PKG_USING_MUPDF is not set */
 
 /* tools packages */
 
-/* PKG_USING_CMBACKTRACE is not set */
-/* PKG_USING_EASYFLASH is not set */
-/* PKG_USING_EASYLOGGER is not set */
-/* PKG_USING_SYSTEMVIEW is not set */
-/* PKG_USING_RDB is not set */
-/* PKG_USING_QRCODE is not set */
-/* PKG_USING_ULOG_EASYFLASH is not set */
-/* PKG_USING_ADBD is not set */
 
 /* system packages */
 
-/* PKG_USING_GUIENGINE is not set */
-/* PKG_USING_PERSIMMON is not set */
-/* PKG_USING_CAIRO is not set */
-/* PKG_USING_PIXMAN is not set */
-/* PKG_USING_LWEXT4 is not set */
-/* PKG_USING_PARTITION is not set */
-/* PKG_USING_FAL is not set */
-/* PKG_USING_SQLITE is not set */
-/* PKG_USING_RTI is not set */
-/* PKG_USING_LITTLEVGL2RTT is not set */
-/* PKG_USING_CMSIS is not set */
-/* PKG_USING_DFS_YAFFS is not set */
-/* PKG_USING_LITTLEFS is not set */
 
 /* peripheral libraries and drivers */
 
-/* sensors drivers */
-
-/* PKG_USING_LSM6DSL is not set */
-/* PKG_USING_LPS22HB is not set */
-/* PKG_USING_HTS221 is not set */
-/* PKG_USING_LSM303AGR is not set */
-/* PKG_USING_BME280 is not set */
-/* PKG_USING_BMA400 is not set */
-/* PKG_USING_BMI160_BMX160 is not set */
-/* PKG_USING_SPL0601 is not set */
-/* PKG_USING_REALTEK_AMEBA is not set */
-/* PKG_USING_SHT2X is not set */
-/* PKG_USING_AHT10 is not set */
-/* PKG_USING_AP3216C is not set */
-/* PKG_USING_STM32_SDIO is not set */
-/* PKG_USING_ICM20608 is not set */
-/* PKG_USING_U8G2 is not set */
-/* PKG_USING_BUTTON is not set */
-/* PKG_USING_MPU6XXX is not set */
-/* PKG_USING_PCF8574 is not set */
-/* PKG_USING_SX12XX is not set */
-/* PKG_USING_KENDRYTE_SDK is not set */
 
 /* miscellaneous packages */
 
-/* PKG_USING_LIBCSV is not set */
-/* PKG_USING_OPTPARSE is not set */
-/* PKG_USING_FASTLZ is not set */
-/* PKG_USING_MINILZO is not set */
-/* PKG_USING_QUICKLZ is not set */
-/* PKG_USING_MULTIBUTTON is not set */
-/* PKG_USING_CANFESTIVAL is not set */
-/* PKG_USING_ZLIB is not set */
-/* PKG_USING_DSTR is not set */
-/* PKG_USING_TINYFRAME is not set */
-/* PKG_USING_KENDRYTE_DEMO is not set */
 
 /* samples: kernel and components samples */
 
@@ -407,6 +268,5 @@
 #define RT_USING_UART0
 #define RT_USING_UART1
 #define BSP_DRV_EMAC
-/* BSP_DRV_AUDIO is not set */
 
 #endif