[bsp][stm32] update dma config in Kconfig

15 files changed, 195 insertions, 149 deletions

diff --git a/bsp/stm32/libraries/templates/stm32f0xx/.config b/bsp/stm32/libraries/templates/stm32f0xx/.config
index 28eea196b2..95ba89c2b8 100644
--- a/bsp/stm32/libraries/templates/stm32f0xx/.config
+++ b/bsp/stm32/libraries/templates/stm32f0xx/.config
@@ -281,6 +281,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
 
 #
 # peripheral libraries and drivers
@@ -295,6 +296,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
 
 #
 # miscellaneous packages
@@ -309,10 +311,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 
 #
 # samples: kernel and components samples
@@ -321,30 +320,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
-
-#
-# Privated Packages of RealThread
-#
-# CONFIG_PKG_USING_CODEC is not set
-# CONFIG_PKG_USING_PLAYER is not set
-# CONFIG_PKG_USING_PERSIMMON_SRC is not set
-
-#
-# Network Utilities
-#
-# CONFIG_PKG_USING_WICED is not set
-# CONFIG_PKG_USING_CLOUDSDK is not set
-# CONFIG_PKG_USING_COREMARK is not set
-# CONFIG_PKG_USING_POWER_MANAGER is not set
-# CONFIG_PKG_USING_RT_OTA is not set
-# CONFIG_PKG_USING_RDBD_SRC is not set
-# CONFIG_PKG_USING_RTINSIGHT is not set
-# CONFIG_PKG_USING_SMARTCONFIG is not set
+# CONFIG_PKG_USING_VI is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F0=y
 
@@ -361,9 +338,10 @@ CONFIG_SOC_STM32F091RC=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_USING_SPI1 is not set
-# CONFIG_BSP_SPI_USING_DMA is not set
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_I2C1 is not set
 
 #
diff --git a/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig
index 766529e3a3..2af0bda763 100644
--- a/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig
+++ b/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig
@@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
 
-    config BSP_USING_SPI1
-        bool "Enable SPI1 BUS"
-        select RT_USING_SPI
-        default n
-        
-    config BSP_SPI_USING_DMA
-        bool "Enable SPI DMA support"
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
         default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_SPI1_TX_USING_DMA
+                bool "Enable SPI1 TX DMA"
+                depends on BSP_USING_SPI1
+                default n
+                
+            config BSP_SPI1_RX_USING_DMA
+                bool "Enable SPI1 RX DMA"
+                depends on BSP_USING_SPI1
+                select BSP_SPI1_TX_USING_DMA
+                default n
+        endif
 
     menuconfig BSP_USING_I2C1
         bool "Enable I2C1 BUS (software simulation)"
diff --git a/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h
index bb37c4d3a2..0026ccb4a8 100644
--- a/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h
+++ b/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h
@@ -149,19 +149,8 @@
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
-
-/* example package: hello */
-
-
-/* Privated Packages of RealThread */
-
-
-/* Network Utilities */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F0
 
@@ -174,6 +163,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */
diff --git a/bsp/stm32/libraries/templates/stm32f10x/.config b/bsp/stm32/libraries/templates/stm32f10x/.config
index b74dd34859..4d9fc24b34 100644
--- a/bsp/stm32/libraries/templates/stm32f10x/.config
+++ b/bsp/stm32/libraries/templates/stm32f10x/.config
@@ -296,6 +296,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
 
 #
 # miscellaneous packages
@@ -310,10 +311,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 
 #
 # samples: kernel and components samples
@@ -322,11 +320,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F1=y
 
@@ -343,9 +338,10 @@ CONFIG_SOC_STM32F103RB=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_USING_SPI1 is not set
-# CONFIG_BSP_SPI_USING_DMA is not set
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_I2C1 is not set
 
 #
diff --git a/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig b/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig
index 39a000d371..a8a2e516f2 100644
--- a/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig
+++ b/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig
@@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
 
-    config BSP_USING_SPI1
-        bool "Enable SPI1 BUS"
-        select RT_USING_SPI
-        default n
-        
-    config BSP_SPI_USING_DMA
-        bool "Enable SPI DMA support"
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
         default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_SPI1_TX_USING_DMA
+                bool "Enable SPI1 TX DMA"
+                depends on BSP_USING_SPI1
+                default n
+                
+            config BSP_SPI1_RX_USING_DMA
+                bool "Enable SPI1 RX DMA"
+                depends on BSP_USING_SPI1
+                select BSP_SPI1_TX_USING_DMA
+                default n
+        endif
 
     menuconfig BSP_USING_I2C1
         bool "Enable I2C1 BUS (software simulation)"
diff --git a/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h b/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h
index 908c0d760d..63450a8a21 100644
--- a/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h
+++ b/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h
@@ -149,13 +149,8 @@
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
-
-/* example package: hello */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F1
 
@@ -168,6 +163,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */
diff --git a/bsp/stm32/libraries/templates/stm32f4xx/.config b/bsp/stm32/libraries/templates/stm32f4xx/.config
index ed06540dab..973b093b5b 100644
--- a/bsp/stm32/libraries/templates/stm32f4xx/.config
+++ b/bsp/stm32/libraries/templates/stm32f4xx/.config
@@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
 
 #
 # miscellaneous packages
@@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 
 #
 # samples: kernel and components samples
@@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F4=y
 
@@ -344,9 +339,10 @@ CONFIG_SOC_STM32F407ZG=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_USING_SPI1 is not set
-# CONFIG_BSP_SPI_USING_DMA is not set
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_I2C1 is not set
 
 #
diff --git a/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig
index 5ba6059541..a04f418b5b 100644
--- a/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig
+++ b/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig
@@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
 
-    config BSP_USING_SPI1
-        bool "Enable SPI1 BUS"
-        select RT_USING_SPI
-        default n
-    
-    config BSP_SPI_USING_DMA
-        bool "Enable SPI DMA support"
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
         default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_SPI1_TX_USING_DMA
+                bool "Enable SPI1 TX DMA"
+                depends on BSP_USING_SPI1
+                default n
+                
+            config BSP_SPI1_RX_USING_DMA
+                bool "Enable SPI1 RX DMA"
+                depends on BSP_USING_SPI1
+                select BSP_SPI1_TX_USING_DMA
+                default n
+        endif
 
     menuconfig BSP_USING_I2C1
         bool "Enable I2C1 BUS (software simulation)"
diff --git a/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h
index b8700de08d..8e6b709a8a 100644
--- a/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h
+++ b/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h
@@ -149,13 +149,8 @@
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
-
-/* example package: hello */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F4
 
@@ -168,6 +163,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */
diff --git a/bsp/stm32/libraries/templates/stm32f7xx/.config b/bsp/stm32/libraries/templates/stm32f7xx/.config
index 5b2fbd74ae..a594f088db 100644
--- a/bsp/stm32/libraries/templates/stm32f7xx/.config
+++ b/bsp/stm32/libraries/templates/stm32f7xx/.config
@@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
 
 #
 # miscellaneous packages
@@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 
 #
 # samples: kernel and components samples
@@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F7=y
 
@@ -344,9 +339,10 @@ CONFIG_SOC_STM32F767IG=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_USING_SPI1 is not set
-# CONFIG_BSP_SPI_USING_DMA is not set
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_I2C1 is not set
 
 #
diff --git a/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig
index 02454235c7..bfd687cbc1 100644
--- a/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig
+++ b/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig
@@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
 
-    config BSP_USING_SPI1
-        bool "Enable SPI1 BUS"
-        select RT_USING_SPI
-        default n
-    
-    config BSP_SPI_USING_DMA
-        bool "Enable SPI DMA support"
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
         default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_SPI1_TX_USING_DMA
+                bool "Enable SPI1 TX DMA"
+                depends on BSP_USING_SPI1
+                default n
+                
+            config BSP_SPI1_RX_USING_DMA
+                bool "Enable SPI1 RX DMA"
+                depends on BSP_USING_SPI1
+                select BSP_SPI1_TX_USING_DMA
+                default n
+        endif
 
     menuconfig BSP_USING_I2C1
         bool "Enable I2C1 BUS (software simulation)"
diff --git a/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h
index f1dff62d4b..50eb442ed8 100644
--- a/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h
+++ b/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h
@@ -149,13 +149,8 @@
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
-
-/* example package: hello */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F7
 
@@ -168,6 +163,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */
diff --git a/bsp/stm32/libraries/templates/stm32l4xx/.config b/bsp/stm32/libraries/templates/stm32l4xx/.config
index 2ace5a3beb..e29aecd0c8 100644
--- a/bsp/stm32/libraries/templates/stm32l4xx/.config
+++ b/bsp/stm32/libraries/templates/stm32l4xx/.config
@@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_MPU6XXX is not set
 # CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
 
 #
 # miscellaneous packages
@@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 
 #
 # samples: kernel and components samples
@@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32L4=y
 
@@ -344,9 +339,10 @@ CONFIG_SOC_STM32L475VE=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_USING_SPI1 is not set
-# CONFIG_BSP_SPI_USING_DMA is not set
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_I2C1 is not set
 
 #
diff --git a/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig
index 5d0299fe3b..a06a967059 100644
--- a/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig
+++ b/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig
@@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
 
-    config BSP_USING_SPI1
-        bool "Enable SPI1 BUS"
-        select RT_USING_SPI
-        default n
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
 
-    config BSP_SPI_USING_DMA
-        bool "Enable SPI DMA support"
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
         default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_SPI1_TX_USING_DMA
+                bool "Enable SPI1 TX DMA"
+                depends on BSP_USING_SPI1
+                default n
+                
+            config BSP_SPI1_RX_USING_DMA
+                bool "Enable SPI1 RX DMA"
+                depends on BSP_USING_SPI1
+                select BSP_SPI1_TX_USING_DMA
+                default n
+        endif
 
     menuconfig BSP_USING_I2C1
         bool "Enable I2C1 BUS (software simulation)"
diff --git a/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h
index 512a1832ce..6ae4a7ba8a 100644
--- a/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h
+++ b/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h
@@ -149,13 +149,8 @@
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
-
-/* example package: hello */
-
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32L4
 
@@ -168,6 +163,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */