[uart] Modify the uart file to configure uart_pin for pullup

1 files changed, 27 insertions, 27 deletions

diff --git a/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index a38a7f26b1..e113c72475 100644
--- a/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -94,7 +94,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -120,10 +120,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -153,9 +153,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);
 
@@ -233,12 +233,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -274,11 +274,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -343,11 +343,11 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PC6     ------> TIM3_CH1
-    PC7     ------> TIM3_CH2 
+    PC7     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -424,11 +424,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -437,7 +437,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
     /* USART1 interrupt Init */
@@ -465,10 +465,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);