[uart] Modify the uart file to configure uart_pin for pullup

1 files changed, 23 insertions, 23 deletions

diff --git a/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index 770d50f63e..7306fcf76f 100644
--- a/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,12 +114,12 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -128,7 +128,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     GPIO_InitStruct.Pin = RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -182,8 +182,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -192,7 +192,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     HAL_GPIO_DeInit(GPIOC, RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin);
 
@@ -226,15 +226,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -263,10 +263,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, STLK_RX_Pin|STLK_TX_Pin);
 
@@ -292,14 +292,14 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -339,15 +339,15 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
-    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin 
+    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin
                           |USB_DP_Pin);
 
   /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */