diff options
| author | Mr.Tiger <[email protected]> | 2021-08-28 17:22:24 +0800 |
|---|---|---|
| committer | Mr.Tiger <[email protected]> | 2021-08-28 17:22:24 +0800 |
| commit | 671b0e188f417b5bbfb8acfc2f4fa2e75556efe5 (patch) | |
| tree | 610b751707bb8e48a68dd0ea6c5d712fe0387979 /bsp/stm32 | |
| parent | ef0414a3b480688338554993aaa365d7725b7a12 (diff) | |
【更新】STM32CubeWB_V1.11.0
Diffstat (limited to 'bsp/stm32')
153 files changed, 43812 insertions, 4483 deletions
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb10xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb10xx.h new file mode 100644 index 0000000000..3bb479a6d2 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb10xx.h @@ -0,0 +1,10856 @@ +/** + ****************************************************************************** + * @file stm32wb10xx.h + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32wb10xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb10xx + * @{ + */ + +#ifndef __STM32WB10xx_H +#define __STM32WB10xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb10xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Communication Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + PWR_SOTF_BLEACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include <stdint.h> + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t RESERVED4; /*!< Reserved, 0x2C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED6[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t RESERVED7; /*!< Reserved, 0xA0 */ + __IO uint32_t RESERVED8; /*!< Reserved, 0xA4 */ + uint32_t RESERVED9[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ +uint32_t RESERVED0[2]; /*!< Reserved, Address offset: 0x10-0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t SMPSCR; /*!< RCC SMPS step-down converter control register, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Touch Sensing Controller (TSC) + */ +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */ +} TSC_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 320KB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 12 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 � 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 � 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF7800UL) /*!< Option Bytes : 128B (0x1FFF7800 � 0x1FFF787F) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 � 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 12 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00030000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00038000UL)/*!< SRAM2B(4 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00003000UL /*!< SRAM1 default size : 12 KB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 KB */ +#define SRAM2B_SIZE 0x00001000UL /*!< SRAM2b default size : 4 KB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x20002FFFUL) /*!< SRAM1 : 12KB (0x20000000 � 0x20002FFF) */ +#define SRAM2A_END_ADDR (0x20037FFFUL) /*!< SRAM2a (backup) : 32KB (0x20030000 � 0x20037FFF) */ +#define SRAM2B_END_ADDR (0x20038FFFUL) /*!< SRAM2b (backup) : 4KB (0x20038000 � 0x20038FFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 � 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 � 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 � 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 � 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC1_COMMON_BASE (APB2PERIPH_BASE + 0x00002700UL) + +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +#define ADC_SUPPORT_2_5_MSPS /* ADC sampling rate 2.5 Msamples/sec */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1UL << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2UL << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Definitions for cohabitation of ADC peripherals 2.5Ms/sec and 5Ms/sec accross STM32WB serie */ +#define ADC_CFGR_DMAEN_Pos ADC_CFGR1_DMAEN_Pos +#define ADC_CFGR_DMAEN_Msk ADC_CFGR1_DMAEN_Msk +#define ADC_CFGR_DMAEN ADC_CFGR1_DMAEN +#define ADC_CFGR_DMACFG_Pos ADC_CFGR1_DMACFG_Pos +#define ADC_CFGR_DMACFG_Msk ADC_CFGR1_DMACFG_Msk +#define ADC_CFGR_DMACFG ADC_CFGR1_DMACFG + +#define ADC_CFGR_SCANDIR_Pos ADC_CFGR1_SCANDIR_Pos +#define ADC_CFGR_SCANDIR_Msk ADC_CFGR1_SCANDIR_Msk +#define ADC_CFGR_SCANDIR ADC_CFGR1_SCANDIR + +#define ADC_CFGR_RES_Pos ADC_CFGR1_RES_Pos +#define ADC_CFGR_RES_Msk ADC_CFGR1_RES_Msk +#define ADC_CFGR_RES ADC_CFGR1_RES +#define ADC_CFGR_RES_0 ADC_CFGR1_RES_0 +#define ADC_CFGR_RES_1 ADC_CFGR1_RES_1 + +#define ADC_CFGR_ALIGN_Pos ADC_CFGR1_ALIGN_Pos +#define ADC_CFGR_ALIGN_Msk ADC_CFGR1_ALIGN_Msk +#define ADC_CFGR_ALIGN ADC_CFGR1_ALIGN + +#define ADC_CFGR_EXTSEL_Pos ADC_CFGR1_EXTSEL_Pos +#define ADC_CFGR_EXTSEL_Msk ADC_CFGR1_EXTSEL_Msk +#define ADC_CFGR_EXTSEL ADC_CFGR1_EXTSEL +#define ADC_CFGR_EXTSEL_0 ADC_CFGR1_EXTSEL_0 +#define ADC_CFGR_EXTSEL_1 ADC_CFGR1_EXTSEL_1 +#define ADC_CFGR_EXTSEL_2 ADC_CFGR1_EXTSEL_2 + +#define ADC_CFGR_EXTEN_Pos ADC_CFGR1_EXTEN_Pos +#define ADC_CFGR_EXTEN_Msk ADC_CFGR1_EXTEN_Msk +#define ADC_CFGR_EXTEN ADC_CFGR1_EXTEN +#define ADC_CFGR_EXTEN_0 ADC_CFGR1_EXTEN_0 +#define ADC_CFGR_EXTEN_1 ADC_CFGR1_EXTEN_1 + +#define ADC_CFGR_OVRMOD_Pos ADC_CFGR1_OVRMOD_Pos +#define ADC_CFGR_OVRMOD_Msk ADC_CFGR1_OVRMOD_Msk +#define ADC_CFGR_OVRMOD ADC_CFGR1_OVRMOD +#define ADC_CFGR_CONT_Pos ADC_CFGR1_CONT_Pos +#define ADC_CFGR_CONT_Msk ADC_CFGR1_CONT_Msk +#define ADC_CFGR_CONT ADC_CFGR1_CONT +#define ADC_CFGR_AUTDLY_Pos ADC_CFGR1_WAIT_Pos +#define ADC_CFGR_AUTDLY_Msk ADC_CFGR1_WAIT_Msk +#define ADC_CFGR_AUTDLY ADC_CFGR1_WAIT +#define ADC_CFGR_AUTOFF_Pos ADC_CFGR1_AUTOFF_Pos +#define ADC_CFGR_AUTOFF_Msk ADC_CFGR1_AUTOFF_Msk +#define ADC_CFGR_AUTOFF ADC_CFGR1_AUTOFF +#define ADC_CFGR_DISCEN_Pos ADC_CFGR1_DISCEN_Pos +#define ADC_CFGR_DISCEN_Msk ADC_CFGR1_DISCEN_Msk +#define ADC_CFGR_DISCEN ADC_CFGR1_DISCEN +#define ADC_CFGR_CHSELRMOD_Pos ADC_CFGR1_CHSELRMOD_Pos +#define ADC_CFGR_CHSELRMOD_Msk ADC_CFGR1_CHSELRMOD_Msk +#define ADC_CFGR_CHSELRMOD ADC_CFGR1_CHSELRMOD + +#define ADC_CFGR_AWD1SGL_Pos ADC_CFGR1_AWD1SGL_Pos +#define ADC_CFGR_AWD1SGL_Msk ADC_CFGR1_AWD1SGL_Msk +#define ADC_CFGR_AWD1SGL ADC_CFGR1_AWD1SGL +#define ADC_CFGR_AWD1EN_Pos ADC_CFGR1_AWD1EN_Pos +#define ADC_CFGR_AWD1EN_Msk ADC_CFGR1_AWD1EN_Msk +#define ADC_CFGR_AWD1EN ADC_CFGR1_AWD1EN + +#define ADC_CFGR_AWD1CH_Pos ADC_CFGR1_AWD1CH_Pos +#define ADC_CFGR_AWD1CH_Msk ADC_CFGR1_AWD1CH_Msk +#define ADC_CFGR_AWD1CH ADC_CFGR1_AWD1CH +#define ADC_CFGR_AWD1CH_0 ADC_CFGR1_AWD1CH_0 +#define ADC_CFGR_AWD1CH_1 ADC_CFGR1_AWD1CH_1 +#define ADC_CFGR_AWD1CH_2 ADC_CFGR1_AWD1CH_2 +#define ADC_CFGR_AWD1CH_3 ADC_CFGR1_AWD1CH_3 +#define ADC_CFGR_AWD1CH_4 ADC_CFGR1_AWD1CH_4 + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (25U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/* Definitions for cohabitation of ADC peripherals 2.5Ms/sec and 5Ms/sec accross STM32WB serie */ +#define ADC_DR_RDATA_Pos ADC_DR_DATA_Pos +#define ADC_DR_RDATA_Msk ADC_DR_DATA_Msk +#define ADC_DR_RDATA ADC_DR_DATA + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ +#define EXTI_FTSR1_FT31_Pos (31U) +#define EXTI_FTSR1_FT31_Msk (0x1UL << EXTI_FTSR1_FT31_Pos) /*!< 0x80000000 */ +#define EXTI_FTSR1_FT31 EXTI_FTSR1_FT31_Msk /*!< Falling trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ +#define EXTI_SWIER1_SWI31_Pos (31U) +#define EXTI_SWIER1_SWI31_Msk (0x1UL << EXTI_SWIER1_SWI31_Pos) /*!< 0x80000000 */ +#define EXTI_SWIER1_SWI31 EXTI_SWIER1_SWI31_Msk /*!< Software Interrupt on line 31 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ +#define EXTI_PR1_PIF31_Pos (31U) +#define EXTI_PR1_PIF31_Msk (0x1UL << EXTI_PR1_PIF31_Pos) /*!< 0x80000000 */ +#define EXTI_PR1_PIF31 EXTI_PR1_PIF31_Msk /*!< Pending bit for line 31 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< CPU1 Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< CPU1 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM25_Pos (25U) +#define EXTI_C2IMR1_IM25_Msk (0x1UL << EXTI_C2IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_C2IMR1_IM25 EXTI_C2IMR1_IM25_Msk /*!< CPU2 Interrupt Mask on line 25 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +#define EXTI_C2IMR1_IM31_Pos (31U) +#define EXTI_C2IMR1_IM31_Msk (0x1UL << EXTI_C2IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_C2IMR1_IM31 EXTI_C2IMR1_IM31_Msk /*!< CPU2 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFFUL << FLASH_CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IRHEN_Pos (15U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk /*!< Internal reset holder enable bit */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nRST_MODE_1_Pos (22U) +#define FLASH_OPTR_nRST_MODE_1_Msk (0x1UL << FLASH_OPTR_nRST_MODE_1_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nRST_MODE_1 FLASH_OPTR_nRST_MODE_1_Msk /*!< PB11 GPIO normal mode */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_nRST_MODE_0_Pos (28U) +#define FLASH_OPTR_nRST_MODE_0_Msk (0x1UL << FLASH_OPTR_nRST_MODE_0_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_nRST_MODE_0 FLASH_OPTR_nRST_MODE_0_Msk /*!< PB11 reset input mode */ +#define FLASH_OPTR_nRST_MODE_Pos (22U) +#define FLASH_OPTR_nRST_MODE_Msk (0x41UL << FLASH_OPTR_nRST_MODE_Pos) /*!< 0x10400000 */ +#define FLASH_OPTR_nRST_MODE FLASH_OPTR_nRST_MODE_Msk +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x1FFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x1FFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x1FFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x1FFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0xFFUL << FLASH_SFR_SFSA_Pos) /*!< 0x000000FF */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (8U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x1FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0001FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* CPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_A_Pos (18U) +#define FLASH_SRRVR_SBRSA_A_Msk (0x1FUL << FLASH_SRRVR_SBRSA_A_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA_A FLASH_SRRVR_SBRSA_A_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_A_Pos (23U) +#define FLASH_SRRVR_BRSD_A_Msk (0x1UL << FLASH_SRRVR_BRSD_A_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD_A FLASH_SRRVR_BRSD_A_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SBRSA_B_Pos (25U) +#define FLASH_SRRVR_SBRSA_B_Msk (0x3UL << FLASH_SRRVR_SBRSA_B_Pos) /*!< 0x06000000 */ +#define FLASH_SRRVR_SBRSA_B FLASH_SRRVR_SBRSA_B_Msk /* Secure backup SRAM2b start address */ +#define FLASH_SRRVR_BRSD_B_Pos (30U) +#define FLASH_SRRVR_BRSD_B_Msk (0x1UL << FLASH_SRRVR_BRSD_B_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_BRSD_B FLASH_SRRVR_BRSD_B_Msk /* Backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* CPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0xFFUL << FLASH_C2CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!<Semaphore ProcessID */ +#define HSEM_R_COREID_Pos (8U) +#define HSEM_R_COREID_Msk (0xFUL << HSEM_R_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_R_COREID HSEM_R_COREID_Msk /*!<Semaphore CoreID. */ +#define HSEM_R_LOCK_Pos (31U) +#define HSEM_R_LOCK_Msk (0x1UL << HSEM_R_LOCK_Pos) /*!< 0x80000000 */ +#define HSEM_R_LOCK HSEM_R_LOCK_Msk /*!<Lock indication. */ + +/******************** Bit definition for HSEM_RLR register ******************/ +#define HSEM_RLR_PROCID_Pos (0U) +#define HSEM_RLR_PROCID_Msk (0xFFUL << HSEM_RLR_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_RLR_PROCID HSEM_RLR_PROCID_Msk /*!<Semaphore ProcessID */ +#define HSEM_RLR_COREID_Pos (8U) +#define HSEM_RLR_COREID_Msk (0xFUL << HSEM_RLR_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_RLR_COREID HSEM_RLR_COREID_Msk /*!<Semaphore CoreID. */ +#define HSEM_RLR_LOCK_Pos (31U) +#define HSEM_RLR_LOCK_Msk (0x1UL << HSEM_RLR_LOCK_Pos) /*!< 0x80000000 */ +#define HSEM_RLR_LOCK HSEM_RLR_LOCK_Msk /*!<Lock indication. */ + +/******************** Bit definition for HSEM_C1IER register ****************/ +#define HSEM_C1IER_ISE0_Pos (0U) +#define HSEM_C1IER_ISE0_Msk (0x1UL << HSEM_C1IER_ISE0_Pos) /*!< 0x00000001 */ +#define HSEM_C1IER_ISE0 HSEM_C1IER_ISE0_Msk /*!<semaphore 0 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE1_Pos (1U) +#define HSEM_C1IER_ISE1_Msk (0x1UL << HSEM_C1IER_ISE1_Pos) /*!< 0x00000002 */ +#define HSEM_C1IER_ISE1 HSEM_C1IER_ISE1_Msk /*!<semaphore 1 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE2_Pos (2U) +#define HSEM_C1IER_ISE2_Msk (0x1UL << HSEM_C1IER_ISE2_Pos) /*!< 0x00000004 */ +#define HSEM_C1IER_ISE2 HSEM_C1IER_ISE2_Msk /*!<semaphore 2 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE3_Pos (3U) +#define HSEM_C1IER_ISE3_Msk (0x1UL << HSEM_C1IER_ISE3_Pos) /*!< 0x00000008 */ +#define HSEM_C1IER_ISE3 HSEM_C1IER_ISE3_Msk /*!<semaphore 3 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE4_Pos (4U) +#define HSEM_C1IER_ISE4_Msk (0x1UL << HSEM_C1IER_ISE4_Pos) /*!< 0x00000010 */ +#define HSEM_C1IER_ISE4 HSEM_C1IER_ISE4_Msk /*!<semaphore 4 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE5_Pos (5U) +#define HSEM_C1IER_ISE5_Msk (0x1UL << HSEM_C1IER_ISE5_Pos) /*!< 0x00000020 */ +#define HSEM_C1IER_ISE5 HSEM_C1IER_ISE5_Msk /*!<semaphore 5 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE6_Pos (6U) +#define HSEM_C1IER_ISE6_Msk (0x1UL << HSEM_C1IER_ISE6_Pos) /*!< 0x00000040 */ +#define HSEM_C1IER_ISE6 HSEM_C1IER_ISE6_Msk /*!<semaphore 6 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE7_Pos (7U) +#define HSEM_C1IER_ISE7_Msk (0x1UL << HSEM_C1IER_ISE7_Pos) /*!< 0x00000080 */ +#define HSEM_C1IER_ISE7 HSEM_C1IER_ISE7_Msk /*!<semaphore 7 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE8_Pos (8U) +#define HSEM_C1IER_ISE8_Msk (0x1UL << HSEM_C1IER_ISE8_Pos) /*!< 0x00000100 */ +#define HSEM_C1IER_ISE8 HSEM_C1IER_ISE8_Msk /*!<semaphore 8 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE9_Pos (9U) +#define HSEM_C1IER_ISE9_Msk (0x1UL << HSEM_C1IER_ISE9_Pos) /*!< 0x00000200 */ +#define HSEM_C1IER_ISE9 HSEM_C1IER_ISE9_Msk /*!<semaphore 9 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE10_Pos (10U) +#define HSEM_C1IER_ISE10_Msk (0x1UL << HSEM_C1IER_ISE10_Pos) /*!< 0x00000400 */ +#define HSEM_C1IER_ISE10 HSEM_C1IER_ISE10_Msk /*!<semaphore 10 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE11_Pos (11U) +#define HSEM_C1IER_ISE11_Msk (0x1UL << HSEM_C1IER_ISE11_Pos) /*!< 0x00000800 */ +#define HSEM_C1IER_ISE11 HSEM_C1IER_ISE11_Msk /*!<semaphore 11 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE12_Pos (12U) +#define HSEM_C1IER_ISE12_Msk (0x1UL << HSEM_C1IER_ISE12_Pos) /*!< 0x00001000 */ +#define HSEM_C1IER_ISE12 HSEM_C1IER_ISE12_Msk /*!<semaphore 12 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE13_Pos (13U) +#define HSEM_C1IER_ISE13_Msk (0x1UL << HSEM_C1IER_ISE13_Pos) /*!< 0x00002000 */ +#define HSEM_C1IER_ISE13 HSEM_C1IER_ISE13_Msk /*!<semaphore 13 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE14_Pos (14U) +#define HSEM_C1IER_ISE14_Msk (0x1UL << HSEM_C1IER_ISE14_Pos) /*!< 0x00004000 */ +#define HSEM_C1IER_ISE14 HSEM_C1IER_ISE14_Msk /*!<semaphore 14 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE15_Pos (15U) +#define HSEM_C1IER_ISE15_Msk (0x1UL << HSEM_C1IER_ISE15_Pos) /*!< 0x00008000 */ +#define HSEM_C1IER_ISE15 HSEM_C1IER_ISE15_Msk /*!<semaphore 15 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE16_Pos (16U) +#define HSEM_C1IER_ISE16_Msk (0x1UL << HSEM_C1IER_ISE16_Pos) /*!< 0x00010000 */ +#define HSEM_C1IER_ISE16 HSEM_C1IER_ISE16_Msk /*!<semaphore 16 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE17_Pos (17U) +#define HSEM_C1IER_ISE17_Msk (0x1UL << HSEM_C1IER_ISE17_Pos) /*!< 0x00020000 */ +#define HSEM_C1IER_ISE17 HSEM_C1IER_ISE17_Msk /*!<semaphore 17 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE18_Pos (18U) +#define HSEM_C1IER_ISE18_Msk (0x1UL << HSEM_C1IER_ISE18_Pos) /*!< 0x00040000 */ +#define HSEM_C1IER_ISE18 HSEM_C1IER_ISE18_Msk /*!<semaphore 18 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE19_Pos (19U) +#define HSEM_C1IER_ISE19_Msk (0x1UL << HSEM_C1IER_ISE19_Pos) /*!< 0x00080000 */ +#define HSEM_C1IER_ISE19 HSEM_C1IER_ISE19_Msk /*!<semaphore 19 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE20_Pos (20U) +#define HSEM_C1IER_ISE20_Msk (0x1UL << HSEM_C1IER_ISE20_Pos) /*!< 0x00100000 */ +#define HSEM_C1IER_ISE20 HSEM_C1IER_ISE20_Msk /*!<semaphore 20 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE21_Pos (21U) +#define HSEM_C1IER_ISE21_Msk (0x1UL << HSEM_C1IER_ISE21_Pos) /*!< 0x00200000 */ +#define HSEM_C1IER_ISE21 HSEM_C1IER_ISE21_Msk /*!<semaphore 21 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE22_Pos (22U) +#define HSEM_C1IER_ISE22_Msk (0x1UL << HSEM_C1IER_ISE22_Pos) /*!< 0x00400000 */ +#define HSEM_C1IER_ISE22 HSEM_C1IER_ISE22_Msk /*!<semaphore 22 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE23_Pos (23U) +#define HSEM_C1IER_ISE23_Msk (0x1UL << HSEM_C1IER_ISE23_Pos) /*!< 0x00800000 */ +#define HSEM_C1IER_ISE23 HSEM_C1IER_ISE23_Msk /*!<semaphore 23 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE24_Pos (24U) +#define HSEM_C1IER_ISE24_Msk (0x1UL << HSEM_C1IER_ISE24_Pos) /*!< 0x01000000 */ +#define HSEM_C1IER_ISE24 HSEM_C1IER_ISE24_Msk /*!<semaphore 24 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE25_Pos (25U) +#define HSEM_C1IER_ISE25_Msk (0x1UL << HSEM_C1IER_ISE25_Pos) /*!< 0x02000000 */ +#define HSEM_C1IER_ISE25 HSEM_C1IER_ISE25_Msk /*!<semaphore 25 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE26_Pos (26U) +#define HSEM_C1IER_ISE26_Msk (0x1UL << HSEM_C1IER_ISE26_Pos) /*!< 0x04000000 */ +#define HSEM_C1IER_ISE26 HSEM_C1IER_ISE26_Msk /*!<semaphore 26 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE27_Pos (27U) +#define HSEM_C1IER_ISE27_Msk (0x1UL << HSEM_C1IER_ISE27_Pos) /*!< 0x08000000 */ +#define HSEM_C1IER_ISE27 HSEM_C1IER_ISE27_Msk /*!<semaphore 27 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE28_Pos (28U) +#define HSEM_C1IER_ISE28_Msk (0x1UL << HSEM_C1IER_ISE28_Pos) /*!< 0x10000000 */ +#define HSEM_C1IER_ISE28 HSEM_C1IER_ISE28_Msk /*!<semaphore 28 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE29_Pos (29U) +#define HSEM_C1IER_ISE29_Msk (0x1UL << HSEM_C1IER_ISE29_Pos) /*!< 0x20000000 */ +#define HSEM_C1IER_ISE29 HSEM_C1IER_ISE29_Msk /*!<semaphore 29 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE30_Pos (30U) +#define HSEM_C1IER_ISE30_Msk (0x1UL << HSEM_C1IER_ISE30_Pos) /*!< 0x40000000 */ +#define HSEM_C1IER_ISE30 HSEM_C1IER_ISE30_Msk /*!<semaphore 30 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE31_Pos (31U) +#define HSEM_C1IER_ISE31_Msk (0x1UL << HSEM_C1IER_ISE31_Pos) /*!< 0x80000000 */ +#define HSEM_C1IER_ISE31 HSEM_C1IER_ISE31_Msk /*!<semaphore 31 CPU1 interrupt enable bit. */ + +/******************** Bit definition for HSEM_C1ICR register *****************/ +#define HSEM_C1ICR_ISC0_Pos (0U) +#define HSEM_C1ICR_ISC0_Msk (0x1UL << HSEM_C1ICR_ISC0_Pos) /*!< 0x00000001 */ +#define HSEM_C1ICR_ISC0 HSEM_C1ICR_ISC0_Msk /*!<semaphore 0 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC1_Pos (1U) +#define HSEM_C1ICR_ISC1_Msk (0x1UL << HSEM_C1ICR_ISC1_Pos) /*!< 0x00000002 */ +#define HSEM_C1ICR_ISC1 HSEM_C1ICR_ISC1_Msk /*!<semaphore 1 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC2_Pos (2U) +#define HSEM_C1ICR_ISC2_Msk (0x1UL << HSEM_C1ICR_ISC2_Pos) /*!< 0x00000004 */ +#define HSEM_C1ICR_ISC2 HSEM_C1ICR_ISC2_Msk /*!<semaphore 2 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC3_Pos (3U) +#define HSEM_C1ICR_ISC3_Msk (0x1UL << HSEM_C1ICR_ISC3_Pos) /*!< 0x00000008 */ +#define HSEM_C1ICR_ISC3 HSEM_C1ICR_ISC3_Msk /*!<semaphore 3 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC4_Pos (4U) +#define HSEM_C1ICR_ISC4_Msk (0x1UL << HSEM_C1ICR_ISC4_Pos) /*!< 0x00000010 */ +#define HSEM_C1ICR_ISC4 HSEM_C1ICR_ISC4_Msk /*!<semaphore 4 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC5_Pos (5U) +#define HSEM_C1ICR_ISC5_Msk (0x1UL << HSEM_C1ICR_ISC5_Pos) /*!< 0x00000020 */ +#define HSEM_C1ICR_ISC5 HSEM_C1ICR_ISC5_Msk /*!<semaphore 5 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC6_Pos (6U) +#define HSEM_C1ICR_ISC6_Msk (0x1UL << HSEM_C1ICR_ISC6_Pos) /*!< 0x00000040 */ +#define HSEM_C1ICR_ISC6 HSEM_C1ICR_ISC6_Msk /*!<semaphore 6 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC7_Pos (7U) +#define HSEM_C1ICR_ISC7_Msk (0x1UL << HSEM_C1ICR_ISC7_Pos) /*!< 0x00000080 */ +#define HSEM_C1ICR_ISC7 HSEM_C1ICR_ISC7_Msk /*!<semaphore 7 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC8_Pos (8U) +#define HSEM_C1ICR_ISC8_Msk (0x1UL << HSEM_C1ICR_ISC8_Pos) /*!< 0x00000100 */ +#define HSEM_C1ICR_ISC8 HSEM_C1ICR_ISC8_Msk /*!<semaphore 8 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC9_Pos (9U) +#define HSEM_C1ICR_ISC9_Msk (0x1UL << HSEM_C1ICR_ISC9_Pos) /*!< 0x00000200 */ +#define HSEM_C1ICR_ISC9 HSEM_C1ICR_ISC9_Msk /*!<semaphore 9 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC10_Pos (10U) +#define HSEM_C1ICR_ISC10_Msk (0x1UL << HSEM_C1ICR_ISC10_Pos) /*!< 0x00000400 */ +#define HSEM_C1ICR_ISC10 HSEM_C1ICR_ISC10_Msk /*!<semaphore 10 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC11_Pos (11U) +#define HSEM_C1ICR_ISC11_Msk (0x1UL << HSEM_C1ICR_ISC11_Pos) /*!< 0x00000800 */ +#define HSEM_C1ICR_ISC11 HSEM_C1ICR_ISC11_Msk /*!<semaphore 11 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC12_Pos (12U) +#define HSEM_C1ICR_ISC12_Msk (0x1UL << HSEM_C1ICR_ISC12_Pos) /*!< 0x00001000 */ +#define HSEM_C1ICR_ISC12 HSEM_C1ICR_ISC12_Msk /*!<semaphore 12 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC13_Pos (13U) +#define HSEM_C1ICR_ISC13_Msk (0x1UL << HSEM_C1ICR_ISC13_Pos) /*!< 0x00002000 */ +#define HSEM_C1ICR_ISC13 HSEM_C1ICR_ISC13_Msk /*!<semaphore 13 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC14_Pos (14U) +#define HSEM_C1ICR_ISC14_Msk (0x1UL << HSEM_C1ICR_ISC14_Pos) /*!< 0x00004000 */ +#define HSEM_C1ICR_ISC14 HSEM_C1ICR_ISC14_Msk /*!<semaphore 14 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC15_Pos (15U) +#define HSEM_C1ICR_ISC15_Msk (0x1UL << HSEM_C1ICR_ISC15_Pos) /*!< 0x00008000 */ +#define HSEM_C1ICR_ISC15 HSEM_C1ICR_ISC15_Msk /*!<semaphore 15 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC16_Pos (16U) +#define HSEM_C1ICR_ISC16_Msk (0x1UL << HSEM_C1ICR_ISC16_Pos) /*!< 0x00010000 */ +#define HSEM_C1ICR_ISC16 HSEM_C1ICR_ISC16_Msk /*!<semaphore 16 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC17_Pos (17U) +#define HSEM_C1ICR_ISC17_Msk (0x1UL << HSEM_C1ICR_ISC17_Pos) /*!< 0x00020000 */ +#define HSEM_C1ICR_ISC17 HSEM_C1ICR_ISC17_Msk /*!<semaphore 17 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC18_Pos (18U) +#define HSEM_C1ICR_ISC18_Msk (0x1UL << HSEM_C1ICR_ISC18_Pos) /*!< 0x00040000 */ +#define HSEM_C1ICR_ISC18 HSEM_C1ICR_ISC18_Msk /*!<semaphore 18 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC19_Pos (19U) +#define HSEM_C1ICR_ISC19_Msk (0x1UL << HSEM_C1ICR_ISC19_Pos) /*!< 0x00080000 */ +#define HSEM_C1ICR_ISC19 HSEM_C1ICR_ISC19_Msk /*!<semaphore 19 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC20_Pos (20U) +#define HSEM_C1ICR_ISC20_Msk (0x1UL << HSEM_C1ICR_ISC20_Pos) /*!< 0x00100000 */ +#define HSEM_C1ICR_ISC20 HSEM_C1ICR_ISC20_Msk /*!<semaphore 20 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC21_Pos (21U) +#define HSEM_C1ICR_ISC21_Msk (0x1UL << HSEM_C1ICR_ISC21_Pos) /*!< 0x00200000 */ +#define HSEM_C1ICR_ISC21 HSEM_C1ICR_ISC21_Msk /*!<semaphore 21 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC22_Pos (22U) +#define HSEM_C1ICR_ISC22_Msk (0x1UL << HSEM_C1ICR_ISC22_Pos) /*!< 0x00400000 */ +#define HSEM_C1ICR_ISC22 HSEM_C1ICR_ISC22_Msk /*!<semaphore 22 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC23_Pos (23U) +#define HSEM_C1ICR_ISC23_Msk (0x1UL << HSEM_C1ICR_ISC23_Pos) /*!< 0x00800000 */ +#define HSEM_C1ICR_ISC23 HSEM_C1ICR_ISC23_Msk /*!<semaphore 23 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC24_Pos (24U) +#define HSEM_C1ICR_ISC24_Msk (0x1UL << HSEM_C1ICR_ISC24_Pos) /*!< 0x01000000 */ +#define HSEM_C1ICR_ISC24 HSEM_C1ICR_ISC24_Msk /*!<semaphore 24 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC25_Pos (25U) +#define HSEM_C1ICR_ISC25_Msk (0x1UL << HSEM_C1ICR_ISC25_Pos) /*!< 0x02000000 */ +#define HSEM_C1ICR_ISC25 HSEM_C1ICR_ISC25_Msk /*!<semaphore 25 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC26_Pos (26U) +#define HSEM_C1ICR_ISC26_Msk (0x1UL << HSEM_C1ICR_ISC26_Pos) /*!< 0x04000000 */ +#define HSEM_C1ICR_ISC26 HSEM_C1ICR_ISC26_Msk /*!<semaphore 26 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC27_Pos (27U) +#define HSEM_C1ICR_ISC27_Msk (0x1UL << HSEM_C1ICR_ISC27_Pos) /*!< 0x08000000 */ +#define HSEM_C1ICR_ISC27 HSEM_C1ICR_ISC27_Msk /*!<semaphore 27 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC28_Pos (28U) +#define HSEM_C1ICR_ISC28_Msk (0x1UL << HSEM_C1ICR_ISC28_Pos) /*!< 0x10000000 */ +#define HSEM_C1ICR_ISC28 HSEM_C1ICR_ISC28_Msk /*!<semaphore 28 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC29_Pos (29U) +#define HSEM_C1ICR_ISC29_Msk (0x1UL << HSEM_C1ICR_ISC29_Pos) /*!< 0x20000000 */ +#define HSEM_C1ICR_ISC29 HSEM_C1ICR_ISC29_Msk /*!<semaphore 29 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC30_Pos (30U) +#define HSEM_C1ICR_ISC30_Msk (0x1UL << HSEM_C1ICR_ISC30_Pos) /*!< 0x40000000 */ +#define HSEM_C1ICR_ISC30 HSEM_C1ICR_ISC30_Msk /*!<semaphore 30 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC31_Pos (31U) +#define HSEM_C1ICR_ISC31_Msk (0x1UL << HSEM_C1ICR_ISC31_Pos) /*!< 0x80000000 */ +#define HSEM_C1ICR_ISC31 HSEM_C1ICR_ISC31_Msk /*!<semaphore 31 CPU1 interrupt clear bit. */ + +/******************** Bit definition for HSEM_C1ISR register *****************/ +#define HSEM_C1ISR_ISF0_Pos (0U) +#define HSEM_C1ISR_ISF0_Msk (0x1UL << HSEM_C1ISR_ISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C1ISR_ISF0 HSEM_C1ISR_ISF0_Msk /*!<semaphore 0 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF1_Pos (1U) +#define HSEM_C1ISR_ISF1_Msk (0x1UL << HSEM_C1ISR_ISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C1ISR_ISF1 HSEM_C1ISR_ISF1_Msk /*!<semaphore 1 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF2_Pos (2U) +#define HSEM_C1ISR_ISF2_Msk (0x1UL << HSEM_C1ISR_ISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C1ISR_ISF2 HSEM_C1ISR_ISF2_Msk /*!<semaphore 2 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF3_Pos (3U) +#define HSEM_C1ISR_ISF3_Msk (0x1UL << HSEM_C1ISR_ISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C1ISR_ISF3 HSEM_C1ISR_ISF3_Msk /*!<semaphore 3 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF4_Pos (4U) +#define HSEM_C1ISR_ISF4_Msk (0x1UL << HSEM_C1ISR_ISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C1ISR_ISF4 HSEM_C1ISR_ISF4_Msk /*!<semaphore 4 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF5_Pos (5U) +#define HSEM_C1ISR_ISF5_Msk (0x1UL << HSEM_C1ISR_ISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C1ISR_ISF5 HSEM_C1ISR_ISF5_Msk /*!<semaphore 5 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF6_Pos (6U) +#define HSEM_C1ISR_ISF6_Msk (0x1UL << HSEM_C1ISR_ISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C1ISR_ISF6 HSEM_C1ISR_ISF6_Msk /*!<semaphore 6 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF7_Pos (7U) +#define HSEM_C1ISR_ISF7_Msk (0x1UL << HSEM_C1ISR_ISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C1ISR_ISF7 HSEM_C1ISR_ISF7_Msk /*!<semaphore 7 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF8_Pos (8U) +#define HSEM_C1ISR_ISF8_Msk (0x1UL << HSEM_C1ISR_ISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C1ISR_ISF8 HSEM_C1ISR_ISF8_Msk /*!<semaphore 8 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF9_Pos (9U) +#define HSEM_C1ISR_ISF9_Msk (0x1UL << HSEM_C1ISR_ISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C1ISR_ISF9 HSEM_C1ISR_ISF9_Msk /*!<semaphore 9 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF10_Pos (10U) +#define HSEM_C1ISR_ISF10_Msk (0x1UL << HSEM_C1ISR_ISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C1ISR_ISF10 HSEM_C1ISR_ISF10_Msk /*!<semaphore 10 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF11_Pos (11U) +#define HSEM_C1ISR_ISF11_Msk (0x1UL << HSEM_C1ISR_ISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C1ISR_ISF11 HSEM_C1ISR_ISF11_Msk /*!<semaphore 11 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF12_Pos (12U) +#define HSEM_C1ISR_ISF12_Msk (0x1UL << HSEM_C1ISR_ISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C1ISR_ISF12 HSEM_C1ISR_ISF12_Msk /*!<semaphore 12 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF13_Pos (13U) +#define HSEM_C1ISR_ISF13_Msk (0x1UL << HSEM_C1ISR_ISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C1ISR_ISF13 HSEM_C1ISR_ISF13_Msk /*!<semaphore 13 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF14_Pos (14U) +#define HSEM_C1ISR_ISF14_Msk (0x1UL << HSEM_C1ISR_ISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C1ISR_ISF14 HSEM_C1ISR_ISF14_Msk /*!<semaphore 14 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF15_Pos (15U) +#define HSEM_C1ISR_ISF15_Msk (0x1UL << HSEM_C1ISR_ISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C1ISR_ISF15 HSEM_C1ISR_ISF15_Msk /*!<semaphore 15 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF16_Pos (16U) +#define HSEM_C1ISR_ISF16_Msk (0x1UL << HSEM_C1ISR_ISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C1ISR_ISF16 HSEM_C1ISR_ISF16_Msk /*!<semaphore 16 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF17_Pos (17U) +#define HSEM_C1ISR_ISF17_Msk (0x1UL << HSEM_C1ISR_ISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C1ISR_ISF17 HSEM_C1ISR_ISF17_Msk /*!<semaphore 17 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF18_Pos (18U) +#define HSEM_C1ISR_ISF18_Msk (0x1UL << HSEM_C1ISR_ISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C1ISR_ISF18 HSEM_C1ISR_ISF18_Msk /*!<semaphore 18 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF19_Pos (19U) +#define HSEM_C1ISR_ISF19_Msk (0x1UL << HSEM_C1ISR_ISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C1ISR_ISF19 HSEM_C1ISR_ISF19_Msk /*!<semaphore 19 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF20_Pos (20U) +#define HSEM_C1ISR_ISF20_Msk (0x1UL << HSEM_C1ISR_ISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C1ISR_ISF20 HSEM_C1ISR_ISF20_Msk /*!<semaphore 20 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF21_Pos (21U) +#define HSEM_C1ISR_ISF21_Msk (0x1UL << HSEM_C1ISR_ISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C1ISR_ISF21 HSEM_C1ISR_ISF21_Msk /*!<semaphore 21 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF22_Pos (22U) +#define HSEM_C1ISR_ISF22_Msk (0x1UL << HSEM_C1ISR_ISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C1ISR_ISF22 HSEM_C1ISR_ISF22_Msk /*!<semaphore 22 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF23_Pos (23U) +#define HSEM_C1ISR_ISF23_Msk (0x1UL << HSEM_C1ISR_ISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C1ISR_ISF23 HSEM_C1ISR_ISF23_Msk /*!<semaphore 23 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF24_Pos (24U) +#define HSEM_C1ISR_ISF24_Msk (0x1UL << HSEM_C1ISR_ISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C1ISR_ISF24 HSEM_C1ISR_ISF24_Msk /*!<semaphore 24 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF25_Pos (25U) +#define HSEM_C1ISR_ISF25_Msk (0x1UL << HSEM_C1ISR_ISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C1ISR_ISF25 HSEM_C1ISR_ISF25_Msk /*!<semaphore 25 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF26_Pos (26U) +#define HSEM_C1ISR_ISF26_Msk (0x1UL << HSEM_C1ISR_ISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C1ISR_ISF26 HSEM_C1ISR_ISF26_Msk /*!<semaphore 26 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF27_Pos (27U) +#define HSEM_C1ISR_ISF27_Msk (0x1UL << HSEM_C1ISR_ISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C1ISR_ISF27 HSEM_C1ISR_ISF27_Msk /*!<semaphore 27 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF28_Pos (28U) +#define HSEM_C1ISR_ISF28_Msk (0x1UL << HSEM_C1ISR_ISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C1ISR_ISF28 HSEM_C1ISR_ISF28_Msk /*!<semaphore 28 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF29_Pos (29U) +#define HSEM_C1ISR_ISF29_Msk (0x1UL << HSEM_C1ISR_ISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C1ISR_ISF29 HSEM_C1ISR_ISF29_Msk /*!<semaphore 29 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF30_Pos (30U) +#define HSEM_C1ISR_ISF30_Msk (0x1UL << HSEM_C1ISR_ISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C1ISR_ISF30 HSEM_C1ISR_ISF30_Msk /*!<semaphore 30 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF31_Pos (31U) +#define HSEM_C1ISR_ISF31_Msk (0x1UL << HSEM_C1ISR_ISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C1ISR_ISF31 HSEM_C1ISR_ISF31_Msk /*!<semaphore 31 CPU1 interrupt status bit. */ + +/******************** Bit definition for HSEM_C1MISR register *****************/ +#define HSEM_C1MISR_MISF0_Pos (0U) +#define HSEM_C1MISR_MISF0_Msk (0x1UL << HSEM_C1MISR_MISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C1MISR_MISF0 HSEM_C1MISR_MISF0_Msk /*!<semaphore 0 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF1_Pos (1U) +#define HSEM_C1MISR_MISF1_Msk (0x1UL << HSEM_C1MISR_MISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C1MISR_MISF1 HSEM_C1MISR_MISF1_Msk /*!<semaphore 1 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF2_Pos (2U) +#define HSEM_C1MISR_MISF2_Msk (0x1UL << HSEM_C1MISR_MISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C1MISR_MISF2 HSEM_C1MISR_MISF2_Msk /*!<semaphore 2 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF3_Pos (3U) +#define HSEM_C1MISR_MISF3_Msk (0x1UL << HSEM_C1MISR_MISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C1MISR_MISF3 HSEM_C1MISR_MISF3_Msk /*!<semaphore 3 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF4_Pos (4U) +#define HSEM_C1MISR_MISF4_Msk (0x1UL << HSEM_C1MISR_MISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C1MISR_MISF4 HSEM_C1MISR_MISF4_Msk /*!<semaphore 4 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF5_Pos (5U) +#define HSEM_C1MISR_MISF5_Msk (0x1UL << HSEM_C1MISR_MISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C1MISR_MISF5 HSEM_C1MISR_MISF5_Msk /*!<semaphore 5 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF6_Pos (6U) +#define HSEM_C1MISR_MISF6_Msk (0x1UL << HSEM_C1MISR_MISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C1MISR_MISF6 HSEM_C1MISR_MISF6_Msk /*!<semaphore 6 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF7_Pos (7U) +#define HSEM_C1MISR_MISF7_Msk (0x1UL << HSEM_C1MISR_MISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C1MISR_MISF7 HSEM_C1MISR_MISF7_Msk /*!<semaphore 7 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF8_Pos (8U) +#define HSEM_C1MISR_MISF8_Msk (0x1UL << HSEM_C1MISR_MISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C1MISR_MISF8 HSEM_C1MISR_MISF8_Msk /*!<semaphore 8 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF9_Pos (9U) +#define HSEM_C1MISR_MISF9_Msk (0x1UL << HSEM_C1MISR_MISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C1MISR_MISF9 HSEM_C1MISR_MISF9_Msk /*!<semaphore 9 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF10_Pos (10U) +#define HSEM_C1MISR_MISF10_Msk (0x1UL << HSEM_C1MISR_MISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C1MISR_MISF10 HSEM_C1MISR_MISF10_Msk /*!<semaphore 10 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF11_Pos (11U) +#define HSEM_C1MISR_MISF11_Msk (0x1UL << HSEM_C1MISR_MISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C1MISR_MISF11 HSEM_C1MISR_MISF11_Msk /*!<semaphore 11 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF12_Pos (12U) +#define HSEM_C1MISR_MISF12_Msk (0x1UL << HSEM_C1MISR_MISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C1MISR_MISF12 HSEM_C1MISR_MISF12_Msk /*!<semaphore 12 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF13_Pos (13U) +#define HSEM_C1MISR_MISF13_Msk (0x1UL << HSEM_C1MISR_MISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C1MISR_MISF13 HSEM_C1MISR_MISF13_Msk /*!<semaphore 13 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF14_Pos (14U) +#define HSEM_C1MISR_MISF14_Msk (0x1UL << HSEM_C1MISR_MISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C1MISR_MISF14 HSEM_C1MISR_MISF14_Msk /*!<semaphore 14 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF15_Pos (15U) +#define HSEM_C1MISR_MISF15_Msk (0x1UL << HSEM_C1MISR_MISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C1MISR_MISF15 HSEM_C1MISR_MISF15_Msk /*!<semaphore 15 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF16_Pos (16U) +#define HSEM_C1MISR_MISF16_Msk (0x1UL << HSEM_C1MISR_MISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C1MISR_MISF16 HSEM_C1MISR_MISF16_Msk /*!<semaphore 16 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF17_Pos (17U) +#define HSEM_C1MISR_MISF17_Msk (0x1UL << HSEM_C1MISR_MISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C1MISR_MISF17 HSEM_C1MISR_MISF17_Msk /*!<semaphore 17 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF18_Pos (18U) +#define HSEM_C1MISR_MISF18_Msk (0x1UL << HSEM_C1MISR_MISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C1MISR_MISF18 HSEM_C1MISR_MISF18_Msk /*!<semaphore 18 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF19_Pos (19U) +#define HSEM_C1MISR_MISF19_Msk (0x1UL << HSEM_C1MISR_MISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C1MISR_MISF19 HSEM_C1MISR_MISF19_Msk /*!<semaphore 19 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF20_Pos (20U) +#define HSEM_C1MISR_MISF20_Msk (0x1UL << HSEM_C1MISR_MISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C1MISR_MISF20 HSEM_C1MISR_MISF20_Msk /*!<semaphore 20 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF21_Pos (21U) +#define HSEM_C1MISR_MISF21_Msk (0x1UL << HSEM_C1MISR_MISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C1MISR_MISF21 HSEM_C1MISR_MISF21_Msk /*!<semaphore 21 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF22_Pos (22U) +#define HSEM_C1MISR_MISF22_Msk (0x1UL << HSEM_C1MISR_MISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C1MISR_MISF22 HSEM_C1MISR_MISF22_Msk /*!<semaphore 22 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF23_Pos (23U) +#define HSEM_C1MISR_MISF23_Msk (0x1UL << HSEM_C1MISR_MISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C1MISR_MISF23 HSEM_C1MISR_MISF23_Msk /*!<semaphore 23 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF24_Pos (24U) +#define HSEM_C1MISR_MISF24_Msk (0x1UL << HSEM_C1MISR_MISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C1MISR_MISF24 HSEM_C1MISR_MISF24_Msk /*!<semaphore 24 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF25_Pos (25U) +#define HSEM_C1MISR_MISF25_Msk (0x1UL << HSEM_C1MISR_MISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C1MISR_MISF25 HSEM_C1MISR_MISF25_Msk /*!<semaphore 25 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF26_Pos (26U) +#define HSEM_C1MISR_MISF26_Msk (0x1UL << HSEM_C1MISR_MISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C1MISR_MISF26 HSEM_C1MISR_MISF26_Msk /*!<semaphore 26 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF27_Pos (27U) +#define HSEM_C1MISR_MISF27_Msk (0x1UL << HSEM_C1MISR_MISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C1MISR_MISF27 HSEM_C1MISR_MISF27_Msk /*!<semaphore 27 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF28_Pos (28U) +#define HSEM_C1MISR_MISF28_Msk (0x1UL << HSEM_C1MISR_MISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C1MISR_MISF28 HSEM_C1MISR_MISF28_Msk /*!<semaphore 28 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF29_Pos (29U) +#define HSEM_C1MISR_MISF29_Msk (0x1UL << HSEM_C1MISR_MISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C1MISR_MISF29 HSEM_C1MISR_MISF29_Msk /*!<semaphore 29 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF30_Pos (30U) +#define HSEM_C1MISR_MISF30_Msk (0x1UL << HSEM_C1MISR_MISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C1MISR_MISF30 HSEM_C1MISR_MISF30_Msk /*!<semaphore 30 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF31_Pos (31U) +#define HSEM_C1MISR_MISF31_Msk (0x1UL << HSEM_C1MISR_MISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C1MISR_MISF31 HSEM_C1MISR_MISF31_Msk /*!<semaphore 31 CPU1 interrupt masked status bit. */ + +/******************** Bit definition for HSEM_C2IER register *****************/ +#define HSEM_C2IER_ISE0_Pos (0U) +#define HSEM_C2IER_ISE0_Msk (0x1UL << HSEM_C2IER_ISE0_Pos) /*!< 0x00000001 */ +#define HSEM_C2IER_ISE0 HSEM_C2IER_ISE0_Msk /*!<semaphore 0 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE1_Pos (1U) +#define HSEM_C2IER_ISE1_Msk (0x1UL << HSEM_C2IER_ISE1_Pos) /*!< 0x00000002 */ +#define HSEM_C2IER_ISE1 HSEM_C2IER_ISE1_Msk /*!<semaphore 1 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE2_Pos (2U) +#define HSEM_C2IER_ISE2_Msk (0x1UL << HSEM_C2IER_ISE2_Pos) /*!< 0x00000004 */ +#define HSEM_C2IER_ISE2 HSEM_C2IER_ISE2_Msk /*!<semaphore 2 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE3_Pos (3U) +#define HSEM_C2IER_ISE3_Msk (0x1UL << HSEM_C2IER_ISE3_Pos) /*!< 0x00000008 */ +#define HSEM_C2IER_ISE3 HSEM_C2IER_ISE3_Msk /*!<semaphore 3 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE4_Pos (4U) +#define HSEM_C2IER_ISE4_Msk (0x1UL << HSEM_C2IER_ISE4_Pos) /*!< 0x00000010 */ +#define HSEM_C2IER_ISE4 HSEM_C2IER_ISE4_Msk /*!<semaphore 4 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE5_Pos (5U) +#define HSEM_C2IER_ISE5_Msk (0x1UL << HSEM_C2IER_ISE5_Pos) /*!< 0x00000020 */ +#define HSEM_C2IER_ISE5 HSEM_C2IER_ISE5_Msk /*!<semaphore 5 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE6_Pos (6U) +#define HSEM_C2IER_ISE6_Msk (0x1UL << HSEM_C2IER_ISE6_Pos) /*!< 0x00000040 */ +#define HSEM_C2IER_ISE6 HSEM_C2IER_ISE6_Msk /*!<semaphore 6 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE7_Pos (7U) +#define HSEM_C2IER_ISE7_Msk (0x1UL << HSEM_C2IER_ISE7_Pos) /*!< 0x00000080 */ +#define HSEM_C2IER_ISE7 HSEM_C2IER_ISE7_Msk /*!<semaphore 7 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE8_Pos (8U) +#define HSEM_C2IER_ISE8_Msk (0x1UL << HSEM_C2IER_ISE8_Pos) /*!< 0x00000100 */ +#define HSEM_C2IER_ISE8 HSEM_C2IER_ISE8_Msk /*!<semaphore 8 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE9_Pos (9U) +#define HSEM_C2IER_ISE9_Msk (0x1UL << HSEM_C2IER_ISE9_Pos) /*!< 0x00000200 */ +#define HSEM_C2IER_ISE9 HSEM_C2IER_ISE9_Msk /*!<semaphore 9 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE10_Pos (10U) +#define HSEM_C2IER_ISE10_Msk (0x1UL << HSEM_C2IER_ISE10_Pos) /*!< 0x00000400 */ +#define HSEM_C2IER_ISE10 HSEM_C2IER_ISE10_Msk /*!<semaphore 10 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE11_Pos (11U) +#define HSEM_C2IER_ISE11_Msk (0x1UL << HSEM_C2IER_ISE11_Pos) /*!< 0x00000800 */ +#define HSEM_C2IER_ISE11 HSEM_C2IER_ISE11_Msk /*!<semaphore 11 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE12_Pos (12U) +#define HSEM_C2IER_ISE12_Msk (0x1UL << HSEM_C2IER_ISE12_Pos) /*!< 0x00001000 */ +#define HSEM_C2IER_ISE12 HSEM_C2IER_ISE12_Msk /*!<semaphore 12 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE13_Pos (13U) +#define HSEM_C2IER_ISE13_Msk (0x1UL << HSEM_C2IER_ISE13_Pos) /*!< 0x00002000 */ +#define HSEM_C2IER_ISE13 HSEM_C2IER_ISE13_Msk /*!<semaphore 13 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE14_Pos (14U) +#define HSEM_C2IER_ISE14_Msk (0x1UL << HSEM_C2IER_ISE14_Pos) /*!< 0x00004000 */ +#define HSEM_C2IER_ISE14 HSEM_C2IER_ISE14_Msk /*!<semaphore 14 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE15_Pos (15U) +#define HSEM_C2IER_ISE15_Msk (0x1UL << HSEM_C2IER_ISE15_Pos) /*!< 0x00008000 */ +#define HSEM_C2IER_ISE15 HSEM_C2IER_ISE15_Msk /*!<semaphore 15 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE16_Pos (16U) +#define HSEM_C2IER_ISE16_Msk (0x1UL << HSEM_C2IER_ISE16_Pos) /*!< 0x00010000 */ +#define HSEM_C2IER_ISE16 HSEM_C2IER_ISE16_Msk /*!<semaphore 16 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE17_Pos (17U) +#define HSEM_C2IER_ISE17_Msk (0x1UL << HSEM_C2IER_ISE17_Pos) /*!< 0x00020000 */ +#define HSEM_C2IER_ISE17 HSEM_C2IER_ISE17_Msk /*!<semaphore 17 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE18_Pos (18U) +#define HSEM_C2IER_ISE18_Msk (0x1UL << HSEM_C2IER_ISE18_Pos) /*!< 0x00040000 */ +#define HSEM_C2IER_ISE18 HSEM_C2IER_ISE18_Msk /*!<semaphore 18 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE19_Pos (19U) +#define HSEM_C2IER_ISE19_Msk (0x1UL << HSEM_C2IER_ISE19_Pos) /*!< 0x00080000 */ +#define HSEM_C2IER_ISE19 HSEM_C2IER_ISE19_Msk /*!<semaphore 19 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE20_Pos (20U) +#define HSEM_C2IER_ISE20_Msk (0x1UL << HSEM_C2IER_ISE20_Pos) /*!< 0x00100000 */ +#define HSEM_C2IER_ISE20 HSEM_C2IER_ISE20_Msk /*!<semaphore 20 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE21_Pos (21U) +#define HSEM_C2IER_ISE21_Msk (0x1UL << HSEM_C2IER_ISE21_Pos) /*!< 0x00200000 */ +#define HSEM_C2IER_ISE21 HSEM_C2IER_ISE21_Msk /*!<semaphore 21 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE22_Pos (22U) +#define HSEM_C2IER_ISE22_Msk (0x1UL << HSEM_C2IER_ISE22_Pos) /*!< 0x00400000 */ +#define HSEM_C2IER_ISE22 HSEM_C2IER_ISE22_Msk /*!<semaphore 22 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE23_Pos (23U) +#define HSEM_C2IER_ISE23_Msk (0x1UL << HSEM_C2IER_ISE23_Pos) /*!< 0x00800000 */ +#define HSEM_C2IER_ISE23 HSEM_C2IER_ISE23_Msk /*!<semaphore 23 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE24_Pos (24U) +#define HSEM_C2IER_ISE24_Msk (0x1UL << HSEM_C2IER_ISE24_Pos) /*!< 0x01000000 */ +#define HSEM_C2IER_ISE24 HSEM_C2IER_ISE24_Msk /*!<semaphore 24 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE25_Pos (25U) +#define HSEM_C2IER_ISE25_Msk (0x1UL << HSEM_C2IER_ISE25_Pos) /*!< 0x02000000 */ +#define HSEM_C2IER_ISE25 HSEM_C2IER_ISE25_Msk /*!<semaphore 25 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE26_Pos (26U) +#define HSEM_C2IER_ISE26_Msk (0x1UL << HSEM_C2IER_ISE26_Pos) /*!< 0x04000000 */ +#define HSEM_C2IER_ISE26 HSEM_C2IER_ISE26_Msk /*!<semaphore 26 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE27_Pos (27U) +#define HSEM_C2IER_ISE27_Msk (0x1UL << HSEM_C2IER_ISE27_Pos) /*!< 0x08000000 */ +#define HSEM_C2IER_ISE27 HSEM_C2IER_ISE27_Msk /*!<semaphore 27 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE28_Pos (28U) +#define HSEM_C2IER_ISE28_Msk (0x1UL << HSEM_C2IER_ISE28_Pos) /*!< 0x10000000 */ +#define HSEM_C2IER_ISE28 HSEM_C2IER_ISE28_Msk /*!<semaphore 28 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE29_Pos (29U) +#define HSEM_C2IER_ISE29_Msk (0x1UL << HSEM_C2IER_ISE29_Pos) /*!< 0x20000000 */ +#define HSEM_C2IER_ISE29 HSEM_C2IER_ISE29_Msk /*!<semaphore 29 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE30_Pos (30U) +#define HSEM_C2IER_ISE30_Msk (0x1UL << HSEM_C2IER_ISE30_Pos) /*!< 0x40000000 */ +#define HSEM_C2IER_ISE30 HSEM_C2IER_ISE30_Msk /*!<semaphore 30 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE31_Pos (31U) +#define HSEM_C2IER_ISE31_Msk (0x1UL << HSEM_C2IER_ISE31_Pos) /*!< 0x80000000 */ +#define HSEM_C2IER_ISE31 HSEM_C2IER_ISE31_Msk /*!<semaphore 31 CPU2 interrupt enable bit. */ + +/******************** Bit definition for HSEM_C2ICR register *****************/ +#define HSEM_C2ICR_ISC0_Pos (0U) +#define HSEM_C2ICR_ISC0_Msk (0x1UL << HSEM_C2ICR_ISC0_Pos) /*!< 0x00000001 */ +#define HSEM_C2ICR_ISC0 HSEM_C2ICR_ISC0_Msk /*!<semaphore 0 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC1_Pos (1U) +#define HSEM_C2ICR_ISC1_Msk (0x1UL << HSEM_C2ICR_ISC1_Pos) /*!< 0x00000002 */ +#define HSEM_C2ICR_ISC1 HSEM_C2ICR_ISC1_Msk /*!<semaphore 1 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC2_Pos (2U) +#define HSEM_C2ICR_ISC2_Msk (0x1UL << HSEM_C2ICR_ISC2_Pos) /*!< 0x00000004 */ +#define HSEM_C2ICR_ISC2 HSEM_C2ICR_ISC2_Msk /*!<semaphore 2 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC3_Pos (3U) +#define HSEM_C2ICR_ISC3_Msk (0x1UL << HSEM_C2ICR_ISC3_Pos) /*!< 0x00000008 */ +#define HSEM_C2ICR_ISC3 HSEM_C2ICR_ISC3_Msk /*!<semaphore 3 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC4_Pos (4U) +#define HSEM_C2ICR_ISC4_Msk (0x1UL << HSEM_C2ICR_ISC4_Pos) /*!< 0x00000010 */ +#define HSEM_C2ICR_ISC4 HSEM_C2ICR_ISC4_Msk /*!<semaphore 4 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC5_Pos (5U) +#define HSEM_C2ICR_ISC5_Msk (0x1UL << HSEM_C2ICR_ISC5_Pos) /*!< 0x00000020 */ +#define HSEM_C2ICR_ISC5 HSEM_C2ICR_ISC5_Msk /*!<semaphore 5 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC6_Pos (6U) +#define HSEM_C2ICR_ISC6_Msk (0x1UL << HSEM_C2ICR_ISC6_Pos) /*!< 0x00000040 */ +#define HSEM_C2ICR_ISC6 HSEM_C2ICR_ISC6_Msk /*!<semaphore 6 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC7_Pos (7U) +#define HSEM_C2ICR_ISC7_Msk (0x1UL << HSEM_C2ICR_ISC7_Pos) /*!< 0x00000080 */ +#define HSEM_C2ICR_ISC7 HSEM_C2ICR_ISC7_Msk /*!<semaphore 7 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC8_Pos (8U) +#define HSEM_C2ICR_ISC8_Msk (0x1UL << HSEM_C2ICR_ISC8_Pos) /*!< 0x00000100 */ +#define HSEM_C2ICR_ISC8 HSEM_C2ICR_ISC8_Msk /*!<semaphore 8 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC9_Pos (9U) +#define HSEM_C2ICR_ISC9_Msk (0x1UL << HSEM_C2ICR_ISC9_Pos) /*!< 0x00000200 */ +#define HSEM_C2ICR_ISC9 HSEM_C2ICR_ISC9_Msk /*!<semaphore 9 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC10_Pos (10U) +#define HSEM_C2ICR_ISC10_Msk (0x1UL << HSEM_C2ICR_ISC10_Pos) /*!< 0x00000400 */ +#define HSEM_C2ICR_ISC10 HSEM_C2ICR_ISC10_Msk /*!<semaphore 10 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC11_Pos (11U) +#define HSEM_C2ICR_ISC11_Msk (0x1UL << HSEM_C2ICR_ISC11_Pos) /*!< 0x00000800 */ +#define HSEM_C2ICR_ISC11 HSEM_C2ICR_ISC11_Msk /*!<semaphore 11 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC12_Pos (12U) +#define HSEM_C2ICR_ISC12_Msk (0x1UL << HSEM_C2ICR_ISC12_Pos) /*!< 0x00001000 */ +#define HSEM_C2ICR_ISC12 HSEM_C2ICR_ISC12_Msk /*!<semaphore 12 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC13_Pos (13U) +#define HSEM_C2ICR_ISC13_Msk (0x1UL << HSEM_C2ICR_ISC13_Pos) /*!< 0x00002000 */ +#define HSEM_C2ICR_ISC13 HSEM_C2ICR_ISC13_Msk /*!<semaphore 13 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC14_Pos (14U) +#define HSEM_C2ICR_ISC14_Msk (0x1UL << HSEM_C2ICR_ISC14_Pos) /*!< 0x00004000 */ +#define HSEM_C2ICR_ISC14 HSEM_C2ICR_ISC14_Msk /*!<semaphore 14 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC15_Pos (15U) +#define HSEM_C2ICR_ISC15_Msk (0x1UL << HSEM_C2ICR_ISC15_Pos) /*!< 0x00008000 */ +#define HSEM_C2ICR_ISC15 HSEM_C2ICR_ISC15_Msk /*!<semaphore 15 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC16_Pos (16U) +#define HSEM_C2ICR_ISC16_Msk (0x1UL << HSEM_C2ICR_ISC16_Pos) /*!< 0x00010000 */ +#define HSEM_C2ICR_ISC16 HSEM_C2ICR_ISC16_Msk /*!<semaphore 16 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC17_Pos (17U) +#define HSEM_C2ICR_ISC17_Msk (0x1UL << HSEM_C2ICR_ISC17_Pos) /*!< 0x00020000 */ +#define HSEM_C2ICR_ISC17 HSEM_C2ICR_ISC17_Msk /*!<semaphore 17 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC18_Pos (18U) +#define HSEM_C2ICR_ISC18_Msk (0x1UL << HSEM_C2ICR_ISC18_Pos) /*!< 0x00040000 */ +#define HSEM_C2ICR_ISC18 HSEM_C2ICR_ISC18_Msk /*!<semaphore 18 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC19_Pos (19U) +#define HSEM_C2ICR_ISC19_Msk (0x1UL << HSEM_C2ICR_ISC19_Pos) /*!< 0x00080000 */ +#define HSEM_C2ICR_ISC19 HSEM_C2ICR_ISC19_Msk /*!<semaphore 19 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC20_Pos (20U) +#define HSEM_C2ICR_ISC20_Msk (0x1UL << HSEM_C2ICR_ISC20_Pos) /*!< 0x00100000 */ +#define HSEM_C2ICR_ISC20 HSEM_C2ICR_ISC20_Msk /*!<semaphore 20 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC21_Pos (21U) +#define HSEM_C2ICR_ISC21_Msk (0x1UL << HSEM_C2ICR_ISC21_Pos) /*!< 0x00200000 */ +#define HSEM_C2ICR_ISC21 HSEM_C2ICR_ISC21_Msk /*!<semaphore 21 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC22_Pos (22U) +#define HSEM_C2ICR_ISC22_Msk (0x1UL << HSEM_C2ICR_ISC22_Pos) /*!< 0x00400000 */ +#define HSEM_C2ICR_ISC22 HSEM_C2ICR_ISC22_Msk /*!<semaphore 22 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC23_Pos (23U) +#define HSEM_C2ICR_ISC23_Msk (0x1UL << HSEM_C2ICR_ISC23_Pos) /*!< 0x00800000 */ +#define HSEM_C2ICR_ISC23 HSEM_C2ICR_ISC23_Msk /*!<semaphore 23 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC24_Pos (24U) +#define HSEM_C2ICR_ISC24_Msk (0x1UL << HSEM_C2ICR_ISC24_Pos) /*!< 0x01000000 */ +#define HSEM_C2ICR_ISC24 HSEM_C2ICR_ISC24_Msk /*!<semaphore 24 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC25_Pos (25U) +#define HSEM_C2ICR_ISC25_Msk (0x1UL << HSEM_C2ICR_ISC25_Pos) /*!< 0x02000000 */ +#define HSEM_C2ICR_ISC25 HSEM_C2ICR_ISC25_Msk /*!<semaphore 25 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC26_Pos (26U) +#define HSEM_C2ICR_ISC26_Msk (0x1UL << HSEM_C2ICR_ISC26_Pos) /*!< 0x04000000 */ +#define HSEM_C2ICR_ISC26 HSEM_C2ICR_ISC26_Msk /*!<semaphore 26 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC27_Pos (27U) +#define HSEM_C2ICR_ISC27_Msk (0x1UL << HSEM_C2ICR_ISC27_Pos) /*!< 0x08000000 */ +#define HSEM_C2ICR_ISC27 HSEM_C2ICR_ISC27_Msk /*!<semaphore 27 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC28_Pos (28U) +#define HSEM_C2ICR_ISC28_Msk (0x1UL << HSEM_C2ICR_ISC28_Pos) /*!< 0x10000000 */ +#define HSEM_C2ICR_ISC28 HSEM_C2ICR_ISC28_Msk /*!<semaphore 28 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC29_Pos (29U) +#define HSEM_C2ICR_ISC29_Msk (0x1UL << HSEM_C2ICR_ISC29_Pos) /*!< 0x20000000 */ +#define HSEM_C2ICR_ISC29 HSEM_C2ICR_ISC29_Msk /*!<semaphore 29 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC30_Pos (30U) +#define HSEM_C2ICR_ISC30_Msk (0x1UL << HSEM_C2ICR_ISC30_Pos) /*!< 0x40000000 */ +#define HSEM_C2ICR_ISC30 HSEM_C2ICR_ISC30_Msk /*!<semaphore 30 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC31_Pos (31U) +#define HSEM_C2ICR_ISC31_Msk (0x1UL << HSEM_C2ICR_ISC31_Pos) /*!< 0x80000000 */ +#define HSEM_C2ICR_ISC31 HSEM_C2ICR_ISC31_Msk /*!<semaphore 31 CPU2 interrupt clear bit. */ + +/******************** Bit definition for HSEM_C2ISR register *****************/ +#define HSEM_C2ISR_ISF0_Pos (0U) +#define HSEM_C2ISR_ISF0_Msk (0x1UL << HSEM_C2ISR_ISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C2ISR_ISF0 HSEM_C2ISR_ISF0_Msk /*!<semaphore 0 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF1_Pos (1U) +#define HSEM_C2ISR_ISF1_Msk (0x1UL << HSEM_C2ISR_ISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C2ISR_ISF1 HSEM_C2ISR_ISF1_Msk /*!<semaphore 1 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF2_Pos (2U) +#define HSEM_C2ISR_ISF2_Msk (0x1UL << HSEM_C2ISR_ISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C2ISR_ISF2 HSEM_C2ISR_ISF2_Msk /*!<semaphore 2 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF3_Pos (3U) +#define HSEM_C2ISR_ISF3_Msk (0x1UL << HSEM_C2ISR_ISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C2ISR_ISF3 HSEM_C2ISR_ISF3_Msk /*!<semaphore 3 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF4_Pos (4U) +#define HSEM_C2ISR_ISF4_Msk (0x1UL << HSEM_C2ISR_ISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C2ISR_ISF4 HSEM_C2ISR_ISF4_Msk /*!<semaphore 4 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF5_Pos (5U) +#define HSEM_C2ISR_ISF5_Msk (0x1UL << HSEM_C2ISR_ISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C2ISR_ISF5 HSEM_C2ISR_ISF5_Msk /*!<semaphore 5 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF6_Pos (6U) +#define HSEM_C2ISR_ISF6_Msk (0x1UL << HSEM_C2ISR_ISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C2ISR_ISF6 HSEM_C2ISR_ISF6_Msk /*!<semaphore 6 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF7_Pos (7U) +#define HSEM_C2ISR_ISF7_Msk (0x1UL << HSEM_C2ISR_ISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C2ISR_ISF7 HSEM_C2ISR_ISF7_Msk /*!<semaphore 7 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF8_Pos (8U) +#define HSEM_C2ISR_ISF8_Msk (0x1UL << HSEM_C2ISR_ISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C2ISR_ISF8 HSEM_C2ISR_ISF8_Msk /*!<semaphore 8 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF9_Pos (9U) +#define HSEM_C2ISR_ISF9_Msk (0x1UL << HSEM_C2ISR_ISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C2ISR_ISF9 HSEM_C2ISR_ISF9_Msk /*!<semaphore 9 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF10_Pos (10U) +#define HSEM_C2ISR_ISF10_Msk (0x1UL << HSEM_C2ISR_ISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C2ISR_ISF10 HSEM_C2ISR_ISF10_Msk /*!<semaphore 10 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF11_Pos (11U) +#define HSEM_C2ISR_ISF11_Msk (0x1UL << HSEM_C2ISR_ISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C2ISR_ISF11 HSEM_C2ISR_ISF11_Msk /*!<semaphore 11 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF12_Pos (12U) +#define HSEM_C2ISR_ISF12_Msk (0x1UL << HSEM_C2ISR_ISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C2ISR_ISF12 HSEM_C2ISR_ISF12_Msk /*!<semaphore 12 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF13_Pos (13U) +#define HSEM_C2ISR_ISF13_Msk (0x1UL << HSEM_C2ISR_ISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C2ISR_ISF13 HSEM_C2ISR_ISF13_Msk /*!<semaphore 13 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF14_Pos (14U) +#define HSEM_C2ISR_ISF14_Msk (0x1UL << HSEM_C2ISR_ISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C2ISR_ISF14 HSEM_C2ISR_ISF14_Msk /*!<semaphore 14 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF15_Pos (15U) +#define HSEM_C2ISR_ISF15_Msk (0x1UL << HSEM_C2ISR_ISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C2ISR_ISF15 HSEM_C2ISR_ISF15_Msk /*!<semaphore 15 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF16_Pos (16U) +#define HSEM_C2ISR_ISF16_Msk (0x1UL << HSEM_C2ISR_ISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C2ISR_ISF16 HSEM_C2ISR_ISF16_Msk /*!<semaphore 16 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF17_Pos (17U) +#define HSEM_C2ISR_ISF17_Msk (0x1UL << HSEM_C2ISR_ISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C2ISR_ISF17 HSEM_C2ISR_ISF17_Msk /*!<semaphore 17 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF18_Pos (18U) +#define HSEM_C2ISR_ISF18_Msk (0x1UL << HSEM_C2ISR_ISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C2ISR_ISF18 HSEM_C2ISR_ISF18_Msk /*!<semaphore 18 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF19_Pos (19U) +#define HSEM_C2ISR_ISF19_Msk (0x1UL << HSEM_C2ISR_ISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C2ISR_ISF19 HSEM_C2ISR_ISF19_Msk /*!<semaphore 19 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF20_Pos (20U) +#define HSEM_C2ISR_ISF20_Msk (0x1UL << HSEM_C2ISR_ISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C2ISR_ISF20 HSEM_C2ISR_ISF20_Msk /*!<semaphore 20 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF21_Pos (21U) +#define HSEM_C2ISR_ISF21_Msk (0x1UL << HSEM_C2ISR_ISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C2ISR_ISF21 HSEM_C2ISR_ISF21_Msk /*!<semaphore 21 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF22_Pos (22U) +#define HSEM_C2ISR_ISF22_Msk (0x1UL << HSEM_C2ISR_ISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C2ISR_ISF22 HSEM_C2ISR_ISF22_Msk /*!<semaphore 22 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF23_Pos (23U) +#define HSEM_C2ISR_ISF23_Msk (0x1UL << HSEM_C2ISR_ISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C2ISR_ISF23 HSEM_C2ISR_ISF23_Msk /*!<semaphore 23 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF24_Pos (24U) +#define HSEM_C2ISR_ISF24_Msk (0x1UL << HSEM_C2ISR_ISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C2ISR_ISF24 HSEM_C2ISR_ISF24_Msk /*!<semaphore 24 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF25_Pos (25U) +#define HSEM_C2ISR_ISF25_Msk (0x1UL << HSEM_C2ISR_ISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C2ISR_ISF25 HSEM_C2ISR_ISF25_Msk /*!<semaphore 25 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF26_Pos (26U) +#define HSEM_C2ISR_ISF26_Msk (0x1UL << HSEM_C2ISR_ISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C2ISR_ISF26 HSEM_C2ISR_ISF26_Msk /*!<semaphore 26 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF27_Pos (27U) +#define HSEM_C2ISR_ISF27_Msk (0x1UL << HSEM_C2ISR_ISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C2ISR_ISF27 HSEM_C2ISR_ISF27_Msk /*!<semaphore 27 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF28_Pos (28U) +#define HSEM_C2ISR_ISF28_Msk (0x1UL << HSEM_C2ISR_ISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C2ISR_ISF28 HSEM_C2ISR_ISF28_Msk /*!<semaphore 28 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF29_Pos (29U) +#define HSEM_C2ISR_ISF29_Msk (0x1UL << HSEM_C2ISR_ISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C2ISR_ISF29 HSEM_C2ISR_ISF29_Msk /*!<semaphore 29 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF30_Pos (30U) +#define HSEM_C2ISR_ISF30_Msk (0x1UL << HSEM_C2ISR_ISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C2ISR_ISF30 HSEM_C2ISR_ISF30_Msk /*!<semaphore 30 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF31_Pos (31U) +#define HSEM_C2ISR_ISF31_Msk (0x1UL << HSEM_C2ISR_ISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C2ISR_ISF31 HSEM_C2ISR_ISF31_Msk /*!<semaphore 31 CPU2 interrupt status bit. */ + +/******************** Bit definition for HSEM_C2MISR register *****************/ +#define HSEM_C2MISR_MISF0_Pos (0U) +#define HSEM_C2MISR_MISF0_Msk (0x1UL << HSEM_C2MISR_MISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C2MISR_MISF0 HSEM_C2MISR_MISF0_Msk /*!<semaphore 0 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF1_Pos (1U) +#define HSEM_C2MISR_MISF1_Msk (0x1UL << HSEM_C2MISR_MISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C2MISR_MISF1 HSEM_C2MISR_MISF1_Msk /*!<semaphore 1 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF2_Pos (2U) +#define HSEM_C2MISR_MISF2_Msk (0x1UL << HSEM_C2MISR_MISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C2MISR_MISF2 HSEM_C2MISR_MISF2_Msk /*!<semaphore 2 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF3_Pos (3U) +#define HSEM_C2MISR_MISF3_Msk (0x1UL << HSEM_C2MISR_MISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C2MISR_MISF3 HSEM_C2MISR_MISF3_Msk /*!<semaphore 3 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF4_Pos (4U) +#define HSEM_C2MISR_MISF4_Msk (0x1UL << HSEM_C2MISR_MISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C2MISR_MISF4 HSEM_C2MISR_MISF4_Msk /*!<semaphore 4 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF5_Pos (5U) +#define HSEM_C2MISR_MISF5_Msk (0x1UL << HSEM_C2MISR_MISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C2MISR_MISF5 HSEM_C2MISR_MISF5_Msk /*!<semaphore 5 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF6_Pos (6U) +#define HSEM_C2MISR_MISF6_Msk (0x1UL << HSEM_C2MISR_MISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C2MISR_MISF6 HSEM_C2MISR_MISF6_Msk /*!<semaphore 6 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF7_Pos (7U) +#define HSEM_C2MISR_MISF7_Msk (0x1UL << HSEM_C2MISR_MISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C2MISR_MISF7 HSEM_C2MISR_MISF7_Msk /*!<semaphore 7 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF8_Pos (8U) +#define HSEM_C2MISR_MISF8_Msk (0x1UL << HSEM_C2MISR_MISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C2MISR_MISF8 HSEM_C2MISR_MISF8_Msk /*!<semaphore 8 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF9_Pos (9U) +#define HSEM_C2MISR_MISF9_Msk (0x1UL << HSEM_C2MISR_MISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C2MISR_MISF9 HSEM_C2MISR_MISF9_Msk /*!<semaphore 9 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF10_Pos (10U) +#define HSEM_C2MISR_MISF10_Msk (0x1UL << HSEM_C2MISR_MISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C2MISR_MISF10 HSEM_C2MISR_MISF10_Msk /*!<semaphore 10 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF11_Pos (11U) +#define HSEM_C2MISR_MISF11_Msk (0x1UL << HSEM_C2MISR_MISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C2MISR_MISF11 HSEM_C2MISR_MISF11_Msk /*!<semaphore 11 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF12_Pos (12U) +#define HSEM_C2MISR_MISF12_Msk (0x1UL << HSEM_C2MISR_MISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C2MISR_MISF12 HSEM_C2MISR_MISF12_Msk /*!<semaphore 12 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF13_Pos (13U) +#define HSEM_C2MISR_MISF13_Msk (0x1UL << HSEM_C2MISR_MISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C2MISR_MISF13 HSEM_C2MISR_MISF13_Msk /*!<semaphore 13 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF14_Pos (14U) +#define HSEM_C2MISR_MISF14_Msk (0x1UL << HSEM_C2MISR_MISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C2MISR_MISF14 HSEM_C2MISR_MISF14_Msk /*!<semaphore 14 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF15_Pos (15U) +#define HSEM_C2MISR_MISF15_Msk (0x1UL << HSEM_C2MISR_MISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C2MISR_MISF15 HSEM_C2MISR_MISF15_Msk /*!<semaphore 15 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF16_Pos (16U) +#define HSEM_C2MISR_MISF16_Msk (0x1UL << HSEM_C2MISR_MISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C2MISR_MISF16 HSEM_C2MISR_MISF16_Msk /*!<semaphore 16 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF17_Pos (17U) +#define HSEM_C2MISR_MISF17_Msk (0x1UL << HSEM_C2MISR_MISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C2MISR_MISF17 HSEM_C2MISR_MISF17_Msk /*!<semaphore 17 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF18_Pos (18U) +#define HSEM_C2MISR_MISF18_Msk (0x1UL << HSEM_C2MISR_MISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C2MISR_MISF18 HSEM_C2MISR_MISF18_Msk /*!<semaphore 18 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF19_Pos (19U) +#define HSEM_C2MISR_MISF19_Msk (0x1UL << HSEM_C2MISR_MISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C2MISR_MISF19 HSEM_C2MISR_MISF19_Msk /*!<semaphore 19 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF20_Pos (20U) +#define HSEM_C2MISR_MISF20_Msk (0x1UL << HSEM_C2MISR_MISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C2MISR_MISF20 HSEM_C2MISR_MISF20_Msk /*!<semaphore 20 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF21_Pos (21U) +#define HSEM_C2MISR_MISF21_Msk (0x1UL << HSEM_C2MISR_MISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C2MISR_MISF21 HSEM_C2MISR_MISF21_Msk /*!<semaphore 21 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF22_Pos (22U) +#define HSEM_C2MISR_MISF22_Msk (0x1UL << HSEM_C2MISR_MISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C2MISR_MISF22 HSEM_C2MISR_MISF22_Msk /*!<semaphore 22 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF23_Pos (23U) +#define HSEM_C2MISR_MISF23_Msk (0x1UL << HSEM_C2MISR_MISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C2MISR_MISF23 HSEM_C2MISR_MISF23_Msk /*!<semaphore 23 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF24_Pos (24U) +#define HSEM_C2MISR_MISF24_Msk (0x1UL << HSEM_C2MISR_MISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C2MISR_MISF24 HSEM_C2MISR_MISF24_Msk /*!<semaphore 24 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF25_Pos (25U) +#define HSEM_C2MISR_MISF25_Msk (0x1UL << HSEM_C2MISR_MISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C2MISR_MISF25 HSEM_C2MISR_MISF25_Msk /*!<semaphore 25 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF26_Pos (26U) +#define HSEM_C2MISR_MISF26_Msk (0x1UL << HSEM_C2MISR_MISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C2MISR_MISF26 HSEM_C2MISR_MISF26_Msk /*!<semaphore 26 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF27_Pos (27U) +#define HSEM_C2MISR_MISF27_Msk (0x1UL << HSEM_C2MISR_MISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C2MISR_MISF27 HSEM_C2MISR_MISF27_Msk /*!<semaphore 27 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF28_Pos (28U) +#define HSEM_C2MISR_MISF28_Msk (0x1UL << HSEM_C2MISR_MISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C2MISR_MISF28 HSEM_C2MISR_MISF28_Msk /*!<semaphore 28 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF29_Pos (29U) +#define HSEM_C2MISR_MISF29_Msk (0x1UL << HSEM_C2MISR_MISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C2MISR_MISF29 HSEM_C2MISR_MISF29_Msk /*!<semaphore 29 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF30_Pos (30U) +#define HSEM_C2MISR_MISF30_Msk (0x1UL << HSEM_C2MISR_MISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C2MISR_MISF30 HSEM_C2MISR_MISF30_Msk /*!<semaphore 30 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF31_Pos (31U) +#define HSEM_C2MISR_MISF31_Msk (0x1UL << HSEM_C2MISR_MISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C2MISR_MISF31 HSEM_C2MISR_MISF31_Msk /*!<semaphore 31 CPU2 interrupt masked status bit. */ + +/******************** Bit definition for HSEM_CR register *****************/ +#define HSEM_CR_COREID_Pos (8U) +#define HSEM_CR_COREID_Msk (0xFUL << HSEM_CR_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_CR_COREID HSEM_CR_COREID_Msk /*!<CoreID of semaphores to be cleared. */ +#define HSEM_CR_COREID_CPU1 (0x4U << HSEM_CR_COREID_Pos) +#define HSEM_CR_COREID_CPU2 (0x8U << HSEM_CR_COREID_Pos) +#define HSEM_CR_COREID_CURRENT HSEM_CR_COREID_CPU1 +#define HSEM_CR_KEY_Pos (16U) +#define HSEM_CR_KEY_Msk (0xFFFFUL << HSEM_CR_KEY_Pos) /*!< 0xFFFF0000 */ +#define HSEM_CR_KEY HSEM_CR_KEY_Msk /*!<semaphores clear key. */ + +/******************** Bit definition for HSEM_KEYR register *****************/ +#define HSEM_KEYR_KEY_Pos (16U) +#define HSEM_KEYR_KEY_Msk (0xFFFFUL << HSEM_KEYR_KEY_Pos) /*!< 0xFFFF0000 */ +#define HSEM_KEYR_KEY HSEM_KEYR_KEY_Msk /*!<semaphores clear key. */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0x00000000UL) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*!<Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR_Pos (0U) +#define IWDG_PR_PR_Msk (0x7UL << IWDG_PR_PR_Pos) /*!< 0x00000007 */ +#define IWDG_PR_PR IWDG_PR_PR_Msk /*!<PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 (0x1U << IWDG_PR_PR_Pos) /*!< 0x00000001 */ +#define IWDG_PR_PR_1 (0x2U << IWDG_PR_PR_Pos) /*!< 0x00000002 */ +#define IWDG_PR_PR_2 (0x4U << IWDG_PR_PR_Pos) /*!< 0x00000004 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL_Pos (0U) +#define IWDG_RLR_RL_Msk (0xFFFUL << IWDG_RLR_RL_Pos) /*!< 0x00000FFF */ +#define IWDG_RLR_RL IWDG_RLR_RL_Msk /*!<Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU_Pos (0U) +#define IWDG_SR_PVU_Msk (0x1UL << IWDG_SR_PVU_Pos) /*!< 0x00000001 */ +#define IWDG_SR_PVU IWDG_SR_PVU_Msk /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU_Pos (1U) +#define IWDG_SR_RVU_Msk (0x1UL << IWDG_SR_RVU_Pos) /*!< 0x00000002 */ +#define IWDG_SR_RVU IWDG_SR_RVU_Msk /*!< Watchdog counter reload value update */ +#define IWDG_SR_WVU_Pos (2U) +#define IWDG_SR_WVU_Msk (0x1UL << IWDG_SR_WVU_Pos) /*!< 0x00000004 */ +#define IWDG_SR_WVU IWDG_SR_WVU_Msk /*!< Watchdog counter window value update */ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_WINR_WIN_Pos (0U) +#define IWDG_WINR_WIN_Msk (0xFFFUL << IWDG_WINR_WIN_Pos) /*!< 0x00000FFF */ +#define IWDG_WINR_WIN IWDG_WINR_WIN_Msk /*!< Watchdog counter window value */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR1 register ********************/ +#define PWR_CR1_LPMS_Pos (0U) +#define PWR_CR1_LPMS_Msk (0x7UL << PWR_CR1_LPMS_Pos) /*!< 0x00000007 */ +#define PWR_CR1_LPMS PWR_CR1_LPMS_Msk /*!< Low Power Mode Selection for CPU1 */ +#define PWR_CR1_LPMS_0 (0x1U << PWR_CR1_LPMS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_LPMS_1 (0x2U << PWR_CR1_LPMS_Pos) /*!< 0x00000002 */ +#define PWR_CR1_LPMS_2 (0x4U << PWR_CR1_LPMS_Pos) /*!< 0x00000004 */ + +#define PWR_CR1_FPDR_Pos (4U) +#define PWR_CR1_FPDR_Msk (0x1UL << PWR_CR1_FPDR_Pos) /*!< 0x00000010 */ +#define PWR_CR1_FPDR PWR_CR1_FPDR_Msk /*!< Flash power down mode during LPrun for CPU1 */ + +#define PWR_CR1_FPDS_Pos (5U) +#define PWR_CR1_FPDS_Msk (0x1UL << PWR_CR1_FPDS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_FPDS PWR_CR1_FPDS_Msk /*!< Flash power down mode during LPsleep for CPU1 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Backup Domain write protection */ + +#define PWR_CR1_LPR_Pos (14U) +#define PWR_CR1_LPR_Msk (0x1UL << PWR_CR1_LPR_Pos) /*!< 0x00004000 */ +#define PWR_CR1_LPR PWR_CR1_LPR_Msk /*!< Regulator Low-Power Run mode */ + +/******************** Bit definition for PWR_CR2 register ********************/ +#define PWR_CR2_PVDE_Pos (0U) +#define PWR_CR2_PVDE_Msk (0x1UL << PWR_CR2_PVDE_Pos) /*!< 0x00000001 */ +#define PWR_CR2_PVDE PWR_CR2_PVDE_Msk /*!< Power voltage detector enable */ + +#define PWR_CR2_PLS_Pos (1U) +#define PWR_CR2_PLS_Msk (0x7UL << PWR_CR2_PLS_Pos) /*!< 0x0000000E */ +#define PWR_CR2_PLS PWR_CR2_PLS_Msk /*!< Power voltage detector level selection */ +#define PWR_CR2_PLS_0 (0x1U << PWR_CR2_PLS_Pos) /*!< 0x00000002 */ +#define PWR_CR2_PLS_1 (0x2U << PWR_CR2_PLS_Pos) /*!< 0x00000004 */ +#define PWR_CR2_PLS_2 (0x4U << PWR_CR2_PLS_Pos) /*!< 0x00000008 */ + +#define PWR_CR2_PVME_Pos (4U) +#define PWR_CR2_PVME_Msk (0x4UL << PWR_CR2_PVME_Pos) /*!< 0x00000040 */ +#define PWR_CR2_PVME PWR_CR2_PVME_Msk /*!< Peripherical Voltage Monitor Enable for all power domains */ +#define PWR_CR2_PVME3_Pos (6U) +#define PWR_CR2_PVME3_Msk (0x1UL << PWR_CR2_PVME3_Pos) /*!< 0x00000040 */ +#define PWR_CR2_PVME3 PWR_CR2_PVME3_Msk /*!< Peripherical Voltage Monitor Vdda Enable */ + +/******************** Bit definition for PWR_CR3 register ********************/ +#define PWR_CR3_EWUP_Pos (0U) +#define PWR_CR3_EWUP_Msk (0x09UL << PWR_CR3_EWUP_Pos) /*!< 0x00000009 */ +#define PWR_CR3_EWUP PWR_CR3_EWUP_Msk /*!< Enable all external Wake-Up lines */ +#define PWR_CR3_EWUP1_Pos (0U) +#define PWR_CR3_EWUP1_Msk (0x1UL << PWR_CR3_EWUP1_Pos) /*!< 0x00000001 */ +#define PWR_CR3_EWUP1 PWR_CR3_EWUP1_Msk /*!< Enable external WKUP Pin 1 [line 0] */ +#define PWR_CR3_EWUP4_Pos (3U) +#define PWR_CR3_EWUP4_Msk (0x1UL << PWR_CR3_EWUP4_Pos) /*!< 0x00000008 */ +#define PWR_CR3_EWUP4 PWR_CR3_EWUP4_Msk /*!< Enable external WKUP Pin 4 [line 3] */ + +#define PWR_CR3_EBORHSMPSFB_Pos (8U) +#define PWR_CR3_EBORHSMPSFB_Msk (0x1UL << PWR_CR3_EBORHSMPSFB_Pos) /*!< 0x00000100 */ +#define PWR_CR3_EBORHSMPSFB PWR_CR3_EBORHSMPSFB_Msk /*!< BORH and SMPS Step Down converter forced in Bypass interrupts for CPU1 */ + +#define PWR_CR3_RRS_Pos (9U) +#define PWR_CR3_RRS_Msk (0x1UL << PWR_CR3_RRS_Pos) /*!< 0x00000200 */ +#define PWR_CR3_RRS PWR_CR3_RRS_Msk /*!< SRAM2 retention in STANDBY mode */ + +#define PWR_CR3_APC_Pos (10U) +#define PWR_CR3_APC_Msk (0x1UL << PWR_CR3_APC_Pos) /*!< 0x00000400 */ +#define PWR_CR3_APC PWR_CR3_APC_Msk /*!< Apply pull-up and pull-down configuration for CPU1 */ + +#define PWR_CR3_ECRPE_Pos (11U) +#define PWR_CR3_ECRPE_Msk (0x1UL << PWR_CR3_ECRPE_Pos) /*!< 0x00000800 */ +#define PWR_CR3_ECRPE PWR_CR3_ECRPE_Msk /*!< Critical radio phase end of activity interrupt for CPU1 */ +#define PWR_CR3_EBLEA_Pos (12U) +#define PWR_CR3_EBLEA_Msk (0x1UL << PWR_CR3_EBLEA_Pos) /*!< 0x00010000 */ +#define PWR_CR3_EBLEA PWR_CR3_EBLEA_Msk /*!< BLE end of activity interrupt for CPU1 */ +#define PWR_CR3_EC2H_Pos (14U) +#define PWR_CR3_EC2H_Msk (0x1UL << PWR_CR3_EC2H_Pos) /*!< 0x00040000 */ +#define PWR_CR3_EC2H PWR_CR3_EC2H_Msk /*!< CPU2 Hold interrupt for CPU1 */ + +#define PWR_CR3_EIWUL_Pos (15U) +#define PWR_CR3_EIWUL_Msk (0x1UL << PWR_CR3_EIWUL_Pos) /*!< 0x00080000 */ +#define PWR_CR3_EIWUL PWR_CR3_EIWUL_Msk /*!< Internal Wake-Up line interrupt for CPU1 */ + +/******************** Bit definition for PWR_CR4 register ********************/ +#define PWR_CR4_WP_Pos (0U) +#define PWR_CR4_WP_Msk (0x09UL << PWR_CR4_WP_Pos) /*!< 0x00000009 */ +#define PWR_CR4_WP PWR_CR4_WP_Msk /*!< Wake-Up polarity for all pins */ +#define PWR_CR4_WP1_Pos (0U) +#define PWR_CR4_WP1_Msk (0x1UL << PWR_CR4_WP1_Pos) /*!< 0x00000001 */ +#define PWR_CR4_WP1 PWR_CR4_WP1_Msk /*!< Wake-Up Pin 1 [line 0] polarity */ +#define PWR_CR4_WP4_Pos (3U) +#define PWR_CR4_WP4_Msk (0x1UL << PWR_CR4_WP4_Pos) /*!< 0x00000008 */ +#define PWR_CR4_WP4 PWR_CR4_WP4_Msk /*!< Wake-Up Pin 4 [line 3] polarity */ + +#define PWR_CR4_VBE_Pos (8U) +#define PWR_CR4_VBE_Msk (0x1UL << PWR_CR4_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CR4_VBE PWR_CR4_VBE_Msk /*!< VBAT battery charging enable */ +#define PWR_CR4_VBRS_Pos (9U) +#define PWR_CR4_VBRS_Msk (0x1UL << PWR_CR4_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CR4_VBRS PWR_CR4_VBRS_Msk /*!< VBAT battery charging resistor selection */ + +#define PWR_CR4_C2BOOT_Pos (15U) +#define PWR_CR4_C2BOOT_Msk (0x1UL << PWR_CR4_C2BOOT_Pos) /*!< 0x00008000 */ +#define PWR_CR4_C2BOOT PWR_CR4_C2BOOT_Msk /*!< Boot CPU2 after reset or wakeup from Stop or Standby modes */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_WUF_Pos (0U) +#define PWR_SR1_WUF_Msk (0x09UL << PWR_SR1_WUF_Pos) /*!< 0x00000009 */ +#define PWR_SR1_WUF PWR_SR1_WUF_Msk /*!< Wakeup Flags of all pins */ +#define PWR_SR1_WUF1_Pos (0U) +#define PWR_SR1_WUF1_Msk (0x1UL << PWR_SR1_WUF1_Pos) /*!< 0x00000001 */ +#define PWR_SR1_WUF1 PWR_SR1_WUF1_Msk /*!< Wakeup Pin 1 [Flag 0] */ +#define PWR_SR1_WUF4_Pos (3U) +#define PWR_SR1_WUF4_Msk (0x1UL << PWR_SR1_WUF4_Pos) /*!< 0x00000008 */ +#define PWR_SR1_WUF4 PWR_SR1_WUF4_Msk /*!< Wakeup Pin 4 [Flag 3] */ + +#define PWR_SR1_SMPSFBF_Pos (7U) +#define PWR_SR1_SMPSFBF_Msk (0x1UL << PWR_SR1_SMPSFBF_Pos) /*!< 0x00000100 */ +#define PWR_SR1_SMPSFBF PWR_SR1_SMPSFBF_Msk /*!< SMPS Step Down converter forced in bypass mode interrupt flag */ + +#define PWR_SR1_BORHF_Pos (8U) +#define PWR_SR1_BORHF_Msk (0x1UL << PWR_SR1_BORHF_Pos) /*!< 0x00000100 */ +#define PWR_SR1_BORHF PWR_SR1_BORHF_Msk /*!< BORH interrupt flag */ + +#define PWR_SR1_BLEWUF_Pos (9U) +#define PWR_SR1_BLEWUF_Msk (0x1UL << PWR_SR1_BLEWUF_Pos) /*!< 0x00000200 */ +#define PWR_SR1_BLEWUF PWR_SR1_BLEWUF_Msk /*!< BLE wakeup interrupt flag */ + +#define PWR_SR1_CRPEF_Pos (11U) +#define PWR_SR1_CRPEF_Msk (0x1UL << PWR_SR1_CRPEF_Pos) /*!< 0x00000800 */ +#define PWR_SR1_CRPEF PWR_SR1_CRPEF_Msk /*!< Critical radio phase end of activity interrupt flag */ +#define PWR_SR1_BLEAF_Pos (12U) +#define PWR_SR1_BLEAF_Msk (0x1UL << PWR_SR1_BLEAF_Pos) /*!< 0x00001000 */ +#define PWR_SR1_BLEAF PWR_SR1_BLEAF_Msk /*!< BLE end of activity interrupt flag */ + +#define PWR_SR1_C2HF_Pos (14U) +#define PWR_SR1_C2HF_Msk (0x1UL << PWR_SR1_C2HF_Pos) /*!< 0x00004000 */ +#define PWR_SR1_C2HF PWR_SR1_C2HF_Msk /*!< CPU2 Hold interrupt flag */ + +#define PWR_SR1_WUFI_Pos (15U) +#define PWR_SR1_WUFI_Msk (0x1UL << PWR_SR1_WUFI_Pos) /*!< 0x00008000 */ +#define PWR_SR1_WUFI PWR_SR1_WUFI_Msk /*!< Internal wakeup interrupt flag */ + +/******************** Bit definition for PWR_SR2 register ********************/ +#define PWR_SR2_SMPSBF_Pos (0U) +#define PWR_SR2_SMPSBF_Msk (0x1UL << PWR_SR2_SMPSBF_Pos) /*!< 0x00000001 */ +#define PWR_SR2_SMPSBF PWR_SR2_SMPSBF_Msk /*!< SMPS step down converter in operating mode bypass flag */ +#define PWR_SR2_SMPSF_Pos (1U) +#define PWR_SR2_SMPSF_Msk (0x1UL << PWR_SR2_SMPSF_Pos) /*!< 0x00000002 */ +#define PWR_SR2_SMPSF PWR_SR2_SMPSF_Msk /*!< SMPS step down converter in operating mode step down flag */ + +#define PWR_SR2_REGLPS_Pos (8U) +#define PWR_SR2_REGLPS_Msk (0x1UL << PWR_SR2_REGLPS_Pos) /*!< 0x00000100 */ +#define PWR_SR2_REGLPS PWR_SR2_REGLPS_Msk /*!< Low-power regulator started */ +#define PWR_SR2_REGLPF_Pos (9U) +#define PWR_SR2_REGLPF_Msk (0x1UL << PWR_SR2_REGLPF_Pos) /*!< 0x00000200 */ +#define PWR_SR2_REGLPF PWR_SR2_REGLPF_Msk /*!< Low-power regulator flag */ + +#define PWR_SR2_PVDO_Pos (11U) +#define PWR_SR2_PVDO_Msk (0x1UL << PWR_SR2_PVDO_Pos) /*!< 0x00000800 */ +#define PWR_SR2_PVDO PWR_SR2_PVDO_Msk /*!< Power voltage detector output */ + +#define PWR_SR2_PVMO3_Pos (14U) +#define PWR_SR2_PVMO3_Msk (0x1UL << PWR_SR2_PVMO3_Pos) /*!< 0x00004000 */ +#define PWR_SR2_PVMO3 PWR_SR2_PVMO3_Msk /*!< Peripheral voltage monitor output 3: VDDA vs. 1.62V */ + +/******************** Bit definition for PWR_SCR register ********************/ +#define PWR_SCR_CWUF_Pos (0U) +#define PWR_SCR_CWUF_Msk (0x09UL << PWR_SCR_CWUF_Pos) /*!< 0x00000009 */ +#define PWR_SCR_CWUF PWR_SCR_CWUF_Msk /*!< Clear Wake-up Flags for all pins */ +#define PWR_SCR_CWUF1_Pos (0U) +#define PWR_SCR_CWUF1_Msk (0x1UL << PWR_SCR_CWUF1_Pos) /*!< 0x00000001 */ +#define PWR_SCR_CWUF1 PWR_SCR_CWUF1_Msk /*!< Clear Wake-up Pin 1 [Flag 0] */ +#define PWR_SCR_CWUF4_Pos (3U) +#define PWR_SCR_CWUF4_Msk (0x1UL << PWR_SCR_CWUF4_Pos) /*!< 0x00000008 */ +#define PWR_SCR_CWUF4 PWR_SCR_CWUF4_Msk /*!< Clear Wake-up Pin 4 [Flag 3] */ + +#define PWR_SCR_CSMPSFBF_Pos (7U) +#define PWR_SCR_CSMPSFBF_Msk (0x1UL << PWR_SCR_CSMPSFBF_Pos) /*!< 0x00000080 */ +#define PWR_SCR_CSMPSFBF PWR_SCR_CSMPSFBF_Msk /*!< Clear SMPS Step Down converter forced in bypass mode interrupt flag */ + +#define PWR_SCR_CBORHF_Pos (8U) +#define PWR_SCR_CBORHF_Msk (0x1UL << PWR_SCR_CBORHF_Pos) /*!< 0x00000100 */ +#define PWR_SCR_CBORHF PWR_SCR_CBORHF_Msk /*!< Clear BORH interrupt flag */ + +#define PWR_SCR_CBLEWUF_Pos (9U) +#define PWR_SCR_CBLEWUF_Msk (0x1UL << PWR_SCR_CBLEWUF_Pos) /*!< 0x00000200 */ +#define PWR_SCR_CBLEWUF PWR_SCR_CBLEWUF_Msk /*!< Clear BLE wakeup interrupt flag */ + +#define PWR_SCR_CCRPEF_Pos (11U) +#define PWR_SCR_CCRPEF_Msk (0x1UL << PWR_SCR_CCRPEF_Pos) /*!< 0x00000800 */ +#define PWR_SCR_CCRPEF PWR_SCR_CCRPEF_Msk /*!< Clear Critical radio phase end of activity interrupt flag */ +#define PWR_SCR_CBLEAF_Pos (12U) +#define PWR_SCR_CBLEAF_Msk (0x1UL << PWR_SCR_CBLEAF_Pos) /*!< 0x00001000 */ +#define PWR_SCR_CBLEAF PWR_SCR_CBLEAF_Msk /*!< Clear BLE end of activity interrupt flag */ + +#define PWR_SCR_CC2HF_Pos (14U) +#define PWR_SCR_CC2HF_Msk (0x1UL << PWR_SCR_CC2HF_Pos) /*!< 0x00004000 */ +#define PWR_SCR_CC2HF PWR_SCR_CC2HF_Msk /*!< Clear CPU2 Hold interrupt flag */ + +/******************** Bit definition for PWR_CR5 register ********************/ +#define PWR_CR5_SMPSVOS_Pos (0U) +#define PWR_CR5_SMPSVOS_Msk (0xFUL << PWR_CR5_SMPSVOS_Pos) /*!< 0x0000000F */ +#define PWR_CR5_SMPSVOS PWR_CR5_SMPSVOS_Msk /*!< SMPS step down converter voltage output scaling voltage level */ +#define PWR_CR5_SMPSVOS_0 (0x01U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR5_SMPSVOS_1 (0x02U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000002 */ +#define PWR_CR5_SMPSVOS_2 (0x04U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000004 */ +#define PWR_CR5_SMPSVOS_3 (0x08U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000008 */ + +#define PWR_CR5_SMPSSC_Pos (4U) +#define PWR_CR5_SMPSSC_Msk (0x7UL << PWR_CR5_SMPSSC_Pos) /*!< 0x00000070 */ +#define PWR_CR5_SMPSSC PWR_CR5_SMPSSC_Msk /*!< SMPS step down converter supply startup current selection */ +#define PWR_CR5_SMPSSC_0 (0x01U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000010 */ +#define PWR_CR5_SMPSSC_1 (0x02U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000020 */ +#define PWR_CR5_SMPSSC_2 (0x04U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000040 */ + +#define PWR_CR5_BORHC_Pos (8U) +#define PWR_CR5_BORHC_Msk (0x1UL << PWR_CR5_BORHC_Pos) /*!< 0x00000100 */ +#define PWR_CR5_BORHC PWR_CR5_BORHC_Msk /*!< BORH configuration selection */ + +#define PWR_CR5_SMPSEN_Pos (15U) +#define PWR_CR5_SMPSEN_Msk (0x1UL << PWR_CR5_SMPSEN_Pos) /*!< 0x00008000 */ +#define PWR_CR5_SMPSEN PWR_CR5_SMPSEN_Msk /*!< Enable SMPS Step Down converter SMPS mode enable */ + +/******************** Bit definition for PWR_PUCRA register *****************/ +#define PWR_PUCRA_PA0_Pos (0U) +#define PWR_PUCRA_PA0_Msk (0x1UL << PWR_PUCRA_PA0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRA_PA0 PWR_PUCRA_PA0_Msk /*!< Pin PA0 Pull-Up set */ +#define PWR_PUCRA_PA1_Pos (1U) +#define PWR_PUCRA_PA1_Msk (0x1UL << PWR_PUCRA_PA1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRA_PA1 PWR_PUCRA_PA1_Msk /*!< Pin PA1 Pull-Up set */ +#define PWR_PUCRA_PA2_Pos (2U) +#define PWR_PUCRA_PA2_Msk (0x1UL << PWR_PUCRA_PA2_Pos) /*!< 0x00000004 */ +#define PWR_PUCRA_PA2 PWR_PUCRA_PA2_Msk /*!< Pin PA2 Pull-Up set */ +#define PWR_PUCRA_PA3_Pos (3U) +#define PWR_PUCRA_PA3_Msk (0x1UL << PWR_PUCRA_PA3_Pos) /*!< 0x00000008 */ +#define PWR_PUCRA_PA3 PWR_PUCRA_PA3_Msk /*!< Pin PA3 Pull-Up set */ +#define PWR_PUCRA_PA4_Pos (4U) +#define PWR_PUCRA_PA4_Msk (0x1UL << PWR_PUCRA_PA4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRA_PA4 PWR_PUCRA_PA4_Msk /*!< Pin PA4 Pull-Up set */ +#define PWR_PUCRA_PA5_Pos (5U) +#define PWR_PUCRA_PA5_Msk (0x1UL << PWR_PUCRA_PA5_Pos) /*!< 0x00000020 */ +#define PWR_PUCRA_PA5 PWR_PUCRA_PA5_Msk /*!< Pin PA5 Pull-Up set */ +#define PWR_PUCRA_PA6_Pos (6U) +#define PWR_PUCRA_PA6_Msk (0x1UL << PWR_PUCRA_PA6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRA_PA6 PWR_PUCRA_PA6_Msk /*!< Pin PA6 Pull-Up set */ +#define PWR_PUCRA_PA7_Pos (7U) +#define PWR_PUCRA_PA7_Msk (0x1UL << PWR_PUCRA_PA7_Pos) /*!< 0x00000080 */ +#define PWR_PUCRA_PA7 PWR_PUCRA_PA7_Msk /*!< Pin PA7 Pull-Up set */ +#define PWR_PUCRA_PA8_Pos (8U) +#define PWR_PUCRA_PA8_Msk (0x1UL << PWR_PUCRA_PA8_Pos) /*!< 0x00000100 */ +#define PWR_PUCRA_PA8 PWR_PUCRA_PA8_Msk /*!< Pin PA8 Pull-Up set */ +#define PWR_PUCRA_PA9_Pos (9U) +#define PWR_PUCRA_PA9_Msk (0x1UL << PWR_PUCRA_PA9_Pos) /*!< 0x00000200 */ +#define PWR_PUCRA_PA9 PWR_PUCRA_PA9_Msk /*!< Pin PA9 Pull-Up set */ +#define PWR_PUCRA_PA10_Pos (10U) +#define PWR_PUCRA_PA10_Msk (0x1UL << PWR_PUCRA_PA10_Pos) /*!< 0x00000400 */ +#define PWR_PUCRA_PA10 PWR_PUCRA_PA10_Msk /*!< Pin PA10 Pull-Up set */ +#define PWR_PUCRA_PA11_Pos (11U) +#define PWR_PUCRA_PA11_Msk (0x1UL << PWR_PUCRA_PA11_Pos) /*!< 0x00000800 */ +#define PWR_PUCRA_PA11 PWR_PUCRA_PA11_Msk /*!< Pin PA11 Pull-Up set */ +#define PWR_PUCRA_PA12_Pos (12U) +#define PWR_PUCRA_PA12_Msk (0x1UL << PWR_PUCRA_PA12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRA_PA12 PWR_PUCRA_PA12_Msk /*!< Pin PA12 Pull-Up set */ +#define PWR_PUCRA_PA13_Pos (13U) +#define PWR_PUCRA_PA13_Msk (0x1UL << PWR_PUCRA_PA13_Pos) /*!< 0x00002000 */ +#define PWR_PUCRA_PA13 PWR_PUCRA_PA13_Msk /*!< Pin PA13 Pull-Up set */ +#define PWR_PUCRA_PA15_Pos (15U) +#define PWR_PUCRA_PA15_Msk (0x1UL << PWR_PUCRA_PA15_Pos) /*!< 0x00008000 */ +#define PWR_PUCRA_PA15 PWR_PUCRA_PA15_Msk /*!< Pin PA15 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRA register *****************/ +#define PWR_PDCRA_PA0_Pos (0U) +#define PWR_PDCRA_PA0_Msk (0x1UL << PWR_PDCRA_PA0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRA_PA0 PWR_PDCRA_PA0_Msk /*!< Pin PA0 Pull-Down set */ +#define PWR_PDCRA_PA1_Pos (1U) +#define PWR_PDCRA_PA1_Msk (0x1UL << PWR_PDCRA_PA1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRA_PA1 PWR_PDCRA_PA1_Msk /*!< Pin PA1 Pull-Down set */ +#define PWR_PDCRA_PA2_Pos (2U) +#define PWR_PDCRA_PA2_Msk (0x1UL << PWR_PDCRA_PA2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRA_PA2 PWR_PDCRA_PA2_Msk /*!< Pin PA2 Pull-Down set */ +#define PWR_PDCRA_PA3_Pos (3U) +#define PWR_PDCRA_PA3_Msk (0x1UL << PWR_PDCRA_PA3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRA_PA3 PWR_PDCRA_PA3_Msk /*!< Pin PA3 Pull-Down set */ +#define PWR_PDCRA_PA4_Pos (4U) +#define PWR_PDCRA_PA4_Msk (0x1UL << PWR_PDCRA_PA4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRA_PA4 PWR_PDCRA_PA4_Msk /*!< Pin PA4 Pull-Down set */ +#define PWR_PDCRA_PA5_Pos (5U) +#define PWR_PDCRA_PA5_Msk (0x1UL << PWR_PDCRA_PA5_Pos) /*!< 0x00000020 */ +#define PWR_PDCRA_PA5 PWR_PDCRA_PA5_Msk /*!< Pin PA5 Pull-Down set */ +#define PWR_PDCRA_PA6_Pos (6U) +#define PWR_PDCRA_PA6_Msk (0x1UL << PWR_PDCRA_PA6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRA_PA6 PWR_PDCRA_PA6_Msk /*!< Pin PA6 Pull-Down set */ +#define PWR_PDCRA_PA7_Pos (7U) +#define PWR_PDCRA_PA7_Msk (0x1UL << PWR_PDCRA_PA7_Pos) /*!< 0x00000080 */ +#define PWR_PDCRA_PA7 PWR_PDCRA_PA7_Msk /*!< Pin PA7 Pull-Down set */ +#define PWR_PDCRA_PA8_Pos (8U) +#define PWR_PDCRA_PA8_Msk (0x1UL << PWR_PDCRA_PA8_Pos) /*!< 0x00000100 */ +#define PWR_PDCRA_PA8 PWR_PDCRA_PA8_Msk /*!< Pin PA8 Pull-Down set */ +#define PWR_PDCRA_PA9_Pos (9U) +#define PWR_PDCRA_PA9_Msk (0x1UL << PWR_PDCRA_PA9_Pos) /*!< 0x00000200 */ +#define PWR_PDCRA_PA9 PWR_PDCRA_PA9_Msk /*!< Pin PA9 Pull-Down set */ +#define PWR_PDCRA_PA10_Pos (10U) +#define PWR_PDCRA_PA10_Msk (0x1UL << PWR_PDCRA_PA10_Pos) /*!< 0x00000400 */ +#define PWR_PDCRA_PA10 PWR_PDCRA_PA10_Msk /*!< Pin PA10 Pull-Down set */ +#define PWR_PDCRA_PA11_Pos (11U) +#define PWR_PDCRA_PA11_Msk (0x1UL << PWR_PDCRA_PA11_Pos) /*!< 0x00000800 */ +#define PWR_PDCRA_PA11 PWR_PDCRA_PA11_Msk /*!< Pin PA11 Pull-Down set */ +#define PWR_PDCRA_PA12_Pos (12U) +#define PWR_PDCRA_PA12_Msk (0x1UL << PWR_PDCRA_PA12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRA_PA12 PWR_PDCRA_PA12_Msk /*!< Pin PA12 Pull-Down set */ +#define PWR_PDCRA_PA14_Pos (14U) +#define PWR_PDCRA_PA14_Msk (0x1UL << PWR_PDCRA_PA14_Pos) /*!< 0x00004000 */ +#define PWR_PDCRA_PA14 PWR_PDCRA_PA14_Msk /*!< Pin PA14 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRB register *****************/ +#define PWR_PUCRB_PB0_Pos (0U) +#define PWR_PUCRB_PB0_Msk (0x1UL << PWR_PUCRB_PB0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRB_PB0 PWR_PUCRB_PB0_Msk /*!< Pin PB0 Pull-Up set */ +#define PWR_PUCRB_PB1_Pos (1U) +#define PWR_PUCRB_PB1_Msk (0x1UL << PWR_PUCRB_PB1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRB_PB1 PWR_PUCRB_PB1_Msk /*!< Pin PB1 Pull-Up set */ +#define PWR_PUCRB_PB2_Pos (2U) +#define PWR_PUCRB_PB2_Msk (0x1UL << PWR_PUCRB_PB2_Pos) /*!< 0x00000004 */ +#define PWR_PUCRB_PB2 PWR_PUCRB_PB2_Msk /*!< Pin PB2 Pull-Up set */ +#define PWR_PUCRB_PB3_Pos (3U) +#define PWR_PUCRB_PB3_Msk (0x1UL << PWR_PUCRB_PB3_Pos) /*!< 0x00000008 */ +#define PWR_PUCRB_PB3 PWR_PUCRB_PB3_Msk /*!< Pin PB3 Pull-Up set */ +#define PWR_PUCRB_PB4_Pos (4U) +#define PWR_PUCRB_PB4_Msk (0x1UL << PWR_PUCRB_PB4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRB_PB4 PWR_PUCRB_PB4_Msk /*!< Pin PB4 Pull-Up set */ +#define PWR_PUCRB_PB5_Pos (5U) +#define PWR_PUCRB_PB5_Msk (0x1UL << PWR_PUCRB_PB5_Pos) /*!< 0x00000020 */ +#define PWR_PUCRB_PB5 PWR_PUCRB_PB5_Msk /*!< Pin PB5 Pull-Up set */ +#define PWR_PUCRB_PB6_Pos (6U) +#define PWR_PUCRB_PB6_Msk (0x1UL << PWR_PUCRB_PB6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRB_PB6 PWR_PUCRB_PB6_Msk /*!< Pin PB6 Pull-Up set */ +#define PWR_PUCRB_PB7_Pos (7U) +#define PWR_PUCRB_PB7_Msk (0x1UL << PWR_PUCRB_PB7_Pos) /*!< 0x00000080 */ +#define PWR_PUCRB_PB7 PWR_PUCRB_PB7_Msk /*!< Pin PB7 Pull-Up set */ +#define PWR_PUCRB_PB8_Pos (8U) +#define PWR_PUCRB_PB8_Msk (0x1UL << PWR_PUCRB_PB8_Pos) /*!< 0x00000100 */ +#define PWR_PUCRB_PB8 PWR_PUCRB_PB8_Msk /*!< Pin PB8 Pull-Up set */ +#define PWR_PUCRB_PB9_Pos (9U) +#define PWR_PUCRB_PB9_Msk (0x1UL << PWR_PUCRB_PB9_Pos) /*!< 0x00000200 */ +#define PWR_PUCRB_PB9 PWR_PUCRB_PB9_Msk /*!< Pin PB9 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRB register *****************/ +#define PWR_PDCRB_PB0_Pos (0U) +#define PWR_PDCRB_PB0_Msk (0x1UL << PWR_PDCRB_PB0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRB_PB0 PWR_PDCRB_PB0_Msk /*!< Pin PB0 Pull-Down set */ +#define PWR_PDCRB_PB1_Pos (1U) +#define PWR_PDCRB_PB1_Msk (0x1UL << PWR_PDCRB_PB1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRB_PB1 PWR_PDCRB_PB1_Msk /*!< Pin PB1 Pull-Down set */ +#define PWR_PDCRB_PB2_Pos (2U) +#define PWR_PDCRB_PB2_Msk (0x1UL << PWR_PDCRB_PB2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRB_PB2 PWR_PDCRB_PB2_Msk /*!< Pin PB2 Pull-Down set */ +#define PWR_PDCRB_PB3_Pos (3U) +#define PWR_PDCRB_PB3_Msk (0x1UL << PWR_PDCRB_PB3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRB_PB3 PWR_PDCRB_PB3_Msk /*!< Pin PB3 Pull-Down set */ +#define PWR_PDCRB_PB5_Pos (5U) +#define PWR_PDCRB_PB5_Msk (0x1UL << PWR_PDCRB_PB5_Pos) /*!< 0x00000020 */ +#define PWR_PDCRB_PB5 PWR_PDCRB_PB5_Msk /*!< Pin PB5 Pull-Down set */ +#define PWR_PDCRB_PB6_Pos (6U) +#define PWR_PDCRB_PB6_Msk (0x1UL << PWR_PDCRB_PB6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRB_PB6 PWR_PDCRB_PB6_Msk /*!< Pin PB6 Pull-Down set */ +#define PWR_PDCRB_PB7_Pos (7U) +#define PWR_PDCRB_PB7_Msk (0x1UL << PWR_PDCRB_PB7_Pos) /*!< 0x00000080 */ +#define PWR_PDCRB_PB7 PWR_PDCRB_PB7_Msk /*!< Pin PB7 Pull-Down set */ +#define PWR_PDCRB_PB8_Pos (8U) +#define PWR_PDCRB_PB8_Msk (0x1UL << PWR_PDCRB_PB8_Pos) /*!< 0x00000100 */ +#define PWR_PDCRB_PB8 PWR_PDCRB_PB8_Msk /*!< Pin PB8 Pull-Down set */ +#define PWR_PDCRB_PB9_Pos (9U) +#define PWR_PDCRB_PB9_Msk (0x1UL << PWR_PDCRB_PB9_Pos) /*!< 0x00000200 */ +#define PWR_PDCRB_PB9 PWR_PDCRB_PB9_Msk /*!< Pin PB9 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRC register *****************/ +#define PWR_PUCRC_PC14_Pos (14U) +#define PWR_PUCRC_PC14_Msk (0x1UL << PWR_PUCRC_PC14_Pos) /*!< 0x00004000 */ +#define PWR_PUCRC_PC14 PWR_PUCRC_PC14_Msk /*!< Pin PC14 Pull-Up set */ +#define PWR_PUCRC_PC15_Pos (15U) +#define PWR_PUCRC_PC15_Msk (0x1UL << PWR_PUCRC_PC15_Pos) /*!< 0x00008000 */ +#define PWR_PUCRC_PC15 PWR_PUCRC_PC15_Msk /*!< Pin PC15 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRC register *****************/ +#define PWR_PDCRC_PC14_Pos (14U) +#define PWR_PDCRC_PC14_Msk (0x1UL << PWR_PDCRC_PC14_Pos) /*!< 0x00004000 */ +#define PWR_PDCRC_PC14 PWR_PDCRC_PC14_Msk /*!< Pin PC14 Pull-Down set */ +#define PWR_PDCRC_PC15_Pos (15U) +#define PWR_PDCRC_PC15_Msk (0x1UL << PWR_PDCRC_PC15_Pos) /*!< 0x00008000 */ +#define PWR_PDCRC_PC15 PWR_PDCRC_PC15_Msk /*!< Pin PC15 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRE register *****************/ +#define PWR_PUCRE_PE4_Pos (4U) +#define PWR_PUCRE_PE4_Msk (0x1UL << PWR_PUCRE_PE4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRE_PE4 PWR_PUCRE_PE4_Msk /*!< Pin PE4 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRE register *****************/ +#define PWR_PDCRE_PE4_Pos (4U) +#define PWR_PDCRE_PE4_Msk (0x1UL << PWR_PDCRE_PE4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRE_PE4 PWR_PDCRE_PE4_Msk /*!< Pin PE4 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRH register *****************/ +#define PWR_PUCRH_PH3_Pos (3U) +#define PWR_PUCRH_PH3_Msk (0x1UL << PWR_PUCRH_PH3_Pos) /*!< 0x00000004 */ +#define PWR_PUCRH_PH3 PWR_PUCRH_PH3_Msk /*!< Pin PH3 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRH register *****************/ +#define PWR_PDCRH_PH3_Pos (3U) +#define PWR_PDCRH_PH3_Msk (0x1UL << PWR_PDCRH_PH3_Pos) /*!< 0x00000004 */ +#define PWR_PDCRH_PH3 PWR_PDCRH_PH3_Msk /*!< Pin PH3 Pull-Down set */ + +/******************** Bit definition for PWR_C2CR1 register ********************/ +#define PWR_C2CR1_LPMS_Pos (0U) +#define PWR_C2CR1_LPMS_Msk (0x7UL << PWR_C2CR1_LPMS_Pos) /*!< 0x00000007 */ +#define PWR_C2CR1_LPMS PWR_C2CR1_LPMS_Msk /*!< Low Power Mode Selection for CPU2 */ +#define PWR_C2CR1_LPMS_0 (0x1U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000001 */ +#define PWR_C2CR1_LPMS_1 (0x2U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000002 */ +#define PWR_C2CR1_LPMS_2 (0x4U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000004 */ + +#define PWR_C2CR1_FPDR_Pos (4U) +#define PWR_C2CR1_FPDR_Msk (0x1UL << PWR_C2CR1_FPDR_Pos) /*!< 0x00000010 */ +#define PWR_C2CR1_FPDR PWR_C2CR1_FPDR_Msk /*!< Flash power down mode during LPrun for CPU2 */ + +#define PWR_C2CR1_FPDS_Pos (5U) +#define PWR_C2CR1_FPDS_Msk (0x1UL << PWR_C2CR1_FPDS_Pos) /*!< 0x00000020 */ +#define PWR_C2CR1_FPDS PWR_C2CR1_FPDS_Msk /*!< Flash power down mode during LPsleep for CPU2 */ + +#define PWR_C2CR1_BLEEWKUP_Pos (14U) +#define PWR_C2CR1_BLEEWKUP_Msk (0x1UL << PWR_C2CR1_BLEEWKUP_Pos) /*!< 0x00008000 */ +#define PWR_C2CR1_BLEEWKUP PWR_C2CR1_BLEEWKUP_Msk /*!< Radio BLE external wakeup signal */ + +/******************** Bit definition for PWR_C2CR3 register ********************/ +#define PWR_C2CR3_EWUP_Pos (0U) +#define PWR_C2CR3_EWUP_Msk (0x09UL << PWR_C2CR3_EWUP_Pos) /*!< 0x00000009 */ +#define PWR_C2CR3_EWUP PWR_C2CR3_EWUP_Msk /*!< Enable all external Wake-Up lines for CPU2 */ +#define PWR_C2CR3_EWUP1_Pos (0U) +#define PWR_C2CR3_EWUP1_Msk (0x1UL << PWR_C2CR3_EWUP1_Pos) /*!< 0x00000001 */ +#define PWR_C2CR3_EWUP1 PWR_C2CR3_EWUP1_Msk /*!< Enable external WKUP Pin 1 [line 0] for CPU2 */ +#define PWR_C2CR3_EWUP4_Pos (3U) +#define PWR_C2CR3_EWUP4_Msk (0x1UL << PWR_C2CR3_EWUP4_Pos) /*!< 0x00000008 */ +#define PWR_C2CR3_EWUP4 PWR_C2CR3_EWUP4_Msk /*!< Enable external WKUP Pin 4 [line 3] for CPU2 */ + +#define PWR_C2CR3_EBLEWUP_Pos (9U) +#define PWR_C2CR3_EBLEWUP_Msk (0x1UL << PWR_C2CR3_EBLEWUP_Pos) /*!< 0x00000200 */ +#define PWR_C2CR3_EBLEWUP PWR_C2CR3_EBLEWUP_Msk /*!< Enable BLE host wakeup interrupt for CPU2 */ + +#define PWR_C2CR3_APC_Pos (12U) +#define PWR_C2CR3_APC_Msk (0x1UL << PWR_C2CR3_APC_Pos) /*!< 0x00001000 */ +#define PWR_C2CR3_APC PWR_C2CR3_APC_Msk /*!< Apply pull-up and pull-down configuration for CPU2 */ + +#define PWR_C2CR3_EIWUL_Pos (15U) +#define PWR_C2CR3_EIWUL_Msk (0x1UL << PWR_C2CR3_EIWUL_Pos) /*!< 0x00008000 */ +#define PWR_C2CR3_EIWUL PWR_C2CR3_EIWUL_Msk /*!< Internal Wake-Up line interrupt for CPU2 */ + +/******************** Bit definition for PWR_EXTSCR register ********************/ +#define PWR_EXTSCR_C1CSSF_Pos (0U) +#define PWR_EXTSCR_C1CSSF_Msk (0x1UL << PWR_EXTSCR_C1CSSF_Pos) /*!< 0x00000001 */ +#define PWR_EXTSCR_C1CSSF PWR_EXTSCR_C1CSSF_Msk /*!< Clear standby and stop flags for CPU1 */ +#define PWR_EXTSCR_C2CSSF_Pos (1U) +#define PWR_EXTSCR_C2CSSF_Msk (0x1UL << PWR_EXTSCR_C2CSSF_Pos) /*!< 0x00000002 */ +#define PWR_EXTSCR_C2CSSF PWR_EXTSCR_C2CSSF_Msk /*!< Clear standby and stop flags for CPU2 */ +#define PWR_EXTSCR_CCRPF_Pos (2U) +#define PWR_EXTSCR_CCRPF_Msk (0x1UL << PWR_EXTSCR_CCRPF_Pos) /*!< 0x00000004 */ +#define PWR_EXTSCR_CCRPF PWR_EXTSCR_CCRPF_Msk /*!< Clear critical radio system phase flag */ + +#define PWR_EXTSCR_C1SBF_Pos (8U) +#define PWR_EXTSCR_C1SBF_Msk (0x1UL << PWR_EXTSCR_C1SBF_Pos) /*!< 0x00000100 */ +#define PWR_EXTSCR_C1SBF PWR_EXTSCR_C1SBF_Msk /*!< System standby flag for CPU1 */ +#define PWR_EXTSCR_C1STOPF_Pos (9U) +#define PWR_EXTSCR_C1STOPF_Msk (0x1UL << PWR_EXTSCR_C1STOPF_Pos) /*!< 0x00000200 */ +#define PWR_EXTSCR_C1STOPF PWR_EXTSCR_C1STOPF_Msk /*!< System stop flag for CPU1 */ +#define PWR_EXTSCR_C2SBF_Pos (10U) +#define PWR_EXTSCR_C2SBF_Msk (0x1UL << PWR_EXTSCR_C2SBF_Pos) /*!< 0x00000400 */ +#define PWR_EXTSCR_C2SBF PWR_EXTSCR_C2SBF_Msk /*!< System standby flag for CPU2 */ +#define PWR_EXTSCR_C2STOPF_Pos (11U) +#define PWR_EXTSCR_C2STOPF_Msk (0x1UL << PWR_EXTSCR_C2STOPF_Pos) /*!< 0x00000800 */ +#define PWR_EXTSCR_C2STOPF PWR_EXTSCR_C2STOPF_Msk /*!< System stop flag for CPU2 */ + +#define PWR_EXTSCR_CRPF_Pos (13U) +#define PWR_EXTSCR_CRPF_Msk (0x1UL << PWR_EXTSCR_CRPF_Pos) /*!< 0x00002000 */ +#define PWR_EXTSCR_CRPF PWR_EXTSCR_CRPF_Msk /*!< Critical radio system phase flag */ + +#define PWR_EXTSCR_C1DS_Pos (14U) +#define PWR_EXTSCR_C1DS_Msk (0x1UL << PWR_EXTSCR_C1DS_Pos) /*!< 0x00004000 */ +#define PWR_EXTSCR_C1DS PWR_EXTSCR_C1DS_Msk /*!< CPU1 deepsleep mode flag */ +#define PWR_EXTSCR_C2DS_Pos (15U) +#define PWR_EXTSCR_C2DS_Msk (0x1UL << PWR_EXTSCR_C2DS_Pos) /*!< 0x00008000 */ +#define PWR_EXTSCR_C2DS PWR_EXTSCR_C2DS_Msk /*!< CPU2 deepsleep mode flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define RCC_SMPS_SUPPORT + +/******************** Bit definition for RCC_CR register *****************/ +#define RCC_CR_MSION_Pos (0U) +#define RCC_CR_MSION_Msk (0x1UL << RCC_CR_MSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_MSION RCC_CR_MSION_Msk /*!< Internal Multi Speed oscillator (MSI) clock enable */ +#define RCC_CR_MSIRDY_Pos (1U) +#define RCC_CR_MSIRDY_Msk (0x1UL << RCC_CR_MSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_MSIRDY RCC_CR_MSIRDY_Msk /*!< Internal Multi Speed oscillator (MSI) clock ready flag */ +#define RCC_CR_MSIPLLEN_Pos (2U) +#define RCC_CR_MSIPLLEN_Msk (0x1UL << RCC_CR_MSIPLLEN_Pos) /*!< 0x00000004 */ +#define RCC_CR_MSIPLLEN RCC_CR_MSIPLLEN_Msk /*!< Internal Multi Speed oscillator (MSI) PLL enable */ + +/*!< MSIRANGE configuration : 12 frequency ranges available */ +#define RCC_CR_MSIRANGE_Pos (4U) +#define RCC_CR_MSIRANGE_Msk (0xFUL << RCC_CR_MSIRANGE_Pos) /*!< 0x000000F0 */ +#define RCC_CR_MSIRANGE RCC_CR_MSIRANGE_Msk /*!< Internal Multi Speed oscillator (MSI) clock Range */ +#define RCC_CR_MSIRANGE_0 (0x0U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000000 */ +#define RCC_CR_MSIRANGE_1 (0x1U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000010 */ +#define RCC_CR_MSIRANGE_2 (0x2U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000020 */ +#define RCC_CR_MSIRANGE_3 (0x3U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000030 */ +#define RCC_CR_MSIRANGE_4 (0x4U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000040 */ +#define RCC_CR_MSIRANGE_5 (0x5U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000050 */ +#define RCC_CR_MSIRANGE_6 (0x6U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000060 */ +#define RCC_CR_MSIRANGE_7 (0x7U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000070 */ +#define RCC_CR_MSIRANGE_8 (0x8U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000080 */ +#define RCC_CR_MSIRANGE_9 (0x9U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000090 */ +#define RCC_CR_MSIRANGE_10 (0xAU << RCC_CR_MSIRANGE_Pos) /*!< 0x000000A0 */ +#define RCC_CR_MSIRANGE_11 (0xBU << RCC_CR_MSIRANGE_Pos) /*!< 0x000000B0 */ + +#define RCC_CR_HSION_Pos (8U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000100 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed oscillator (HSI16) clock enable */ +#define RCC_CR_HSIKERON_Pos (9U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed oscillator (HSI16) clock enable for some IPs Kernel */ +#define RCC_CR_HSIRDY_Pos (10U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000400 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed oscillator (HSI16) clock ready flag */ +#define RCC_CR_HSIASFS_Pos (11U) +#define RCC_CR_HSIASFS_Msk (0x1UL << RCC_CR_HSIASFS_Pos) /*!< 0x00000800 */ +#define RCC_CR_HSIASFS RCC_CR_HSIASFS_Msk /*!< HSI16 Automatic Start from Stop */ +#define RCC_CR_HSIKERDY_Pos (12U) +#define RCC_CR_HSIKERDY_Msk (0x1UL << RCC_CR_HSIKERDY_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSIKERDY RCC_CR_HSIKERDY_Msk /*!< Internal High Speed oscillator (HSI16) clock enable for some IPs Kernel ready flag*/ + +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed oscillator (HSE) clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed oscillator (HSE) clock ready */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< HSE Clock Security System enable */ +#define RCC_CR_HSEPRE_Pos (20U) +#define RCC_CR_HSEPRE_Msk (0x1UL << RCC_CR_HSEPRE_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEPRE RCC_CR_HSEPRE_Msk /*!< HSE sysclk prescaler */ + +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< System PLL clock enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< System PLL clock ready */ + +/******************** Bit definition for RCC_ICSCR register ***************/ +/*!< MSICAL configuration */ +#define RCC_ICSCR_MSICAL_Pos (0U) +#define RCC_ICSCR_MSICAL_Msk (0xFFUL << RCC_ICSCR_MSICAL_Pos) /*!< 0x000000FF */ +#define RCC_ICSCR_MSICAL RCC_ICSCR_MSICAL_Msk /*!< MSICAL[7:0] bits */ +#define RCC_ICSCR_MSICAL_0 (0x01U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000001 */ +#define RCC_ICSCR_MSICAL_1 (0x02U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000002 */ +#define RCC_ICSCR_MSICAL_2 (0x04U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000004 */ +#define RCC_ICSCR_MSICAL_3 (0x08U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000008 */ +#define RCC_ICSCR_MSICAL_4 (0x10U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000010 */ +#define RCC_ICSCR_MSICAL_5 (0x20U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000020 */ +#define RCC_ICSCR_MSICAL_6 (0x40U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000040 */ +#define RCC_ICSCR_MSICAL_7 (0x80U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000080 */ + +/*!< MSITRIM configuration */ +#define RCC_ICSCR_MSITRIM_Pos (8U) +#define RCC_ICSCR_MSITRIM_Msk (0xFFUL << RCC_ICSCR_MSITRIM_Pos) /*!< 0x0000FF00 */ +#define RCC_ICSCR_MSITRIM RCC_ICSCR_MSITRIM_Msk /*!< MSITRIM[7:0] bits */ +#define RCC_ICSCR_MSITRIM_0 (0x01U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000100 */ +#define RCC_ICSCR_MSITRIM_1 (0x02U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000200 */ +#define RCC_ICSCR_MSITRIM_2 (0x04U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000400 */ +#define RCC_ICSCR_MSITRIM_3 (0x08U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000800 */ +#define RCC_ICSCR_MSITRIM_4 (0x10U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00001000 */ +#define RCC_ICSCR_MSITRIM_5 (0x20U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00002000 */ +#define RCC_ICSCR_MSITRIM_6 (0x40U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00004000 */ +#define RCC_ICSCR_MSITRIM_7 (0x80U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00008000 */ + +/*!< HSICAL configuration */ +#define RCC_ICSCR_HSICAL_Pos (16U) +#define RCC_ICSCR_HSICAL_Msk (0xFFUL << RCC_ICSCR_HSICAL_Pos) /*!< 0x00FF0000 */ +#define RCC_ICSCR_HSICAL RCC_ICSCR_HSICAL_Msk /*!< HSICAL[7:0] bits */ +#define RCC_ICSCR_HSICAL_0 (0x01U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00010000 */ +#define RCC_ICSCR_HSICAL_1 (0x02U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00020000 */ +#define RCC_ICSCR_HSICAL_2 (0x04U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00040000 */ +#define RCC_ICSCR_HSICAL_3 (0x08U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00080000 */ +#define RCC_ICSCR_HSICAL_4 (0x10U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00100000 */ +#define RCC_ICSCR_HSICAL_5 (0x20U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00200000 */ +#define RCC_ICSCR_HSICAL_6 (0x40U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00400000 */ +#define RCC_ICSCR_HSICAL_7 (0x80U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00800000 */ + +/*!< HSITRIM configuration */ +#define RCC_ICSCR_HSITRIM_Pos (24U) +#define RCC_ICSCR_HSITRIM_Msk (0x7FUL << RCC_ICSCR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_ICSCR_HSITRIM RCC_ICSCR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_ICSCR_HSITRIM_0 (0x01U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_ICSCR_HSITRIM_1 (0x02U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_ICSCR_HSITRIM_2 (0x04U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_ICSCR_HSITRIM_3 (0x08U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_ICSCR_HSITRIM_4 (0x10U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_ICSCR_HSITRIM_5 (0x20U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_ICSCR_HSITRIM_6 (0x40U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1U << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2U << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1U << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2U << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1U << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2U << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4U << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8U << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1U << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2U << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4U << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +/*!< STOPWUCK configuration */ +#define RCC_CFGR_STOPWUCK_Pos (15U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ + +/*!< HPREF configuration */ +#define RCC_CFGR_HPREF_Pos (16U) +#define RCC_CFGR_HPREF_Msk (0x1UL << RCC_CFGR_HPREF_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_HPREF RCC_CFGR_HPREF_Msk /*!< AHB prescaler flag */ + +/*!< PPRE1F configuration */ +#define RCC_CFGR_PPRE1F_Pos (17U) +#define RCC_CFGR_PPRE1F_Msk (0x1UL << RCC_CFGR_PPRE1F_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PPRE1F RCC_CFGR_PPRE1F_Msk /*!< CPU1 APB1 prescaler flag */ + +/*!< PPRE2F configuration */ +#define RCC_CFGR_PPRE2F_Pos (18U) +#define RCC_CFGR_PPRE2F_Msk (0x1UL << RCC_CFGR_PPRE2F_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PPRE2F RCC_CFGR_PPRE2F_Msk /*!< APB2 prescaler flag */ + +/*!< MCOSEL configuration */ +#define RCC_CFGR_MCOSEL_Pos (24U) +#define RCC_CFGR_MCOSEL_Msk (0xFUL << RCC_CFGR_MCOSEL_Pos) /*!< 0x0F000000 */ +#define RCC_CFGR_MCOSEL RCC_CFGR_MCOSEL_Msk /*!< MCOSEL [3:0] bits (Clock output selection) */ +#define RCC_CFGR_MCOSEL_0 (0x1U << RCC_CFGR_MCOSEL_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCOSEL_1 (0x2U << RCC_CFGR_MCOSEL_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCOSEL_2 (0x4U << RCC_CFGR_MCOSEL_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCOSEL_3 (0x8U << RCC_CFGR_MCOSEL_Pos) /*!< 0x08000000 */ + +/*!< MCOPRE configuration */ +#define RCC_CFGR_MCOPRE_Pos (28U) +#define RCC_CFGR_MCOPRE_Msk (0x7UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x70000000 */ +#define RCC_CFGR_MCOPRE RCC_CFGR_MCOPRE_Msk /*!< MCO prescaler */ +#define RCC_CFGR_MCOPRE_0 (0x1U << RCC_CFGR_MCOPRE_Pos) /*!< 0x10000000 */ +#define RCC_CFGR_MCOPRE_1 (0x2U << RCC_CFGR_MCOPRE_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCOPRE_2 (0x4U << RCC_CFGR_MCOPRE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLLSRC_Pos (0U) +#define RCC_PLLCFGR_PLLSRC_Msk (0x3UL << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCFGR_PLLSRC RCC_PLLCFGR_PLLSRC_Msk +#define RCC_PLLCFGR_PLLSRC_0 (0x1U << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLLSRC_1 (0x2U << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000002 */ + +#define RCC_PLLCFGR_PLLM_Pos (4U) +#define RCC_PLLCFGR_PLLM_Msk (0x7UL << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000070 */ +#define RCC_PLLCFGR_PLLM RCC_PLLCFGR_PLLM_Msk +#define RCC_PLLCFGR_PLLM_0 (0x1U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000010 */ +#define RCC_PLLCFGR_PLLM_1 (0x2U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLLM_2 (0x4U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000040 */ + +#define RCC_PLLCFGR_PLLN_Pos (8U) +#define RCC_PLLCFGR_PLLN_Msk (0x7FUL << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00007F00 */ +#define RCC_PLLCFGR_PLLN RCC_PLLCFGR_PLLN_Msk +#define RCC_PLLCFGR_PLLN_0 (0x01U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLLN_1 (0x02U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000200 */ +#define RCC_PLLCFGR_PLLN_2 (0x04U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000400 */ +#define RCC_PLLCFGR_PLLN_3 (0x08U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLLN_4 (0x10U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLLN_5 (0x20U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLLN_6 (0x40U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00004000 */ + +#define RCC_PLLCFGR_PLLPEN_Pos (16U) +#define RCC_PLLCFGR_PLLPEN_Msk (0x1UL << RCC_PLLCFGR_PLLPEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLLPEN RCC_PLLCFGR_PLLPEN_Msk +#define RCC_PLLCFGR_PLLP_Pos (17U) +#define RCC_PLLCFGR_PLLP_Msk (0x1FUL << RCC_PLLCFGR_PLLP_Pos) /*!< 0x003E0000 */ +#define RCC_PLLCFGR_PLLP RCC_PLLCFGR_PLLP_Msk +#define RCC_PLLCFGR_PLLP_0 (0x01U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLLP_1 (0x02U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLLP_2 (0x04U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLLP_3 (0x08U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLLP_4 (0x10U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00200000 */ + +#define RCC_PLLCFGR_PLLQEN_Pos (24U) +#define RCC_PLLCFGR_PLLQEN_Msk (0x1UL << RCC_PLLCFGR_PLLQEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLLQEN RCC_PLLCFGR_PLLQEN_Msk +#define RCC_PLLCFGR_PLLQ_Pos (25U) +#define RCC_PLLCFGR_PLLQ_Msk (0x7UL << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x0E000000 */ +#define RCC_PLLCFGR_PLLQ RCC_PLLCFGR_PLLQ_Msk +#define RCC_PLLCFGR_PLLQ_0 (0x1U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLLQ_1 (0x2U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x04000000 */ +#define RCC_PLLCFGR_PLLQ_2 (0x4U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x08000000 */ + +#define RCC_PLLCFGR_PLLREN_Pos (28U) +#define RCC_PLLCFGR_PLLREN_Msk (0x1UL << RCC_PLLCFGR_PLLREN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLLREN RCC_PLLCFGR_PLLREN_Msk +#define RCC_PLLCFGR_PLLR_Pos (29U) +#define RCC_PLLCFGR_PLLR_Msk (0x7UL << RCC_PLLCFGR_PLLR_Pos) /*!< 0xE0000000 */ +#define RCC_PLLCFGR_PLLR RCC_PLLCFGR_PLLR_Msk +#define RCC_PLLCFGR_PLLR_0 (0x1U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLLR_1 (0x2U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLLR_2 (0x4U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSI1RDYIE_Pos (0U) +#define RCC_CIER_LSI1RDYIE_Msk (0x1UL << RCC_CIER_LSI1RDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSI1RDYIE RCC_CIER_LSI1RDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_MSIRDYIE_Pos (2U) +#define RCC_CIER_MSIRDYIE_Msk (0x1UL << RCC_CIER_MSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (3U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (4U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_PLLRDYIE_Pos (5U) +#define RCC_CIER_PLLRDYIE_Msk (0x1UL << RCC_CIER_PLLRDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk +#define RCC_CIER_LSI2RDYIE_Pos (11U) +#define RCC_CIER_LSI2RDYIE_Msk (0x1UL << RCC_CIER_LSI2RDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIER_LSI2RDYIE RCC_CIER_LSI2RDYIE_Msk + + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSI1RDYF_Pos (0U) +#define RCC_CIFR_LSI1RDYF_Msk (0x1UL << RCC_CIFR_LSI1RDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSI1RDYF RCC_CIFR_LSI1RDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_MSIRDYF_Pos (2U) +#define RCC_CIFR_MSIRDYF_Msk (0x1UL << RCC_CIFR_MSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (3U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (4U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_PLLRDYF_Pos (5U) +#define RCC_CIFR_PLLRDYF_Msk (0x1UL << RCC_CIFR_PLLRDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF_Msk +#define RCC_CIFR_CSSF_Pos (8U) +#define RCC_CIFR_CSSF_Msk (0x1UL << RCC_CIFR_CSSF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_CSSF RCC_CIFR_CSSF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_LSI2RDYF_Pos (11U) +#define RCC_CIFR_LSI2RDYF_Msk (0x1UL << RCC_CIFR_LSI2RDYF_Pos) /*!< 0x00000800 */ +#define RCC_CIFR_LSI2RDYF RCC_CIFR_LSI2RDYF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSI1RDYC_Pos (0U) +#define RCC_CICR_LSI1RDYC_Msk (0x1UL << RCC_CICR_LSI1RDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSI1RDYC RCC_CICR_LSI1RDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_MSIRDYC_Pos (2U) +#define RCC_CICR_MSIRDYC_Msk (0x1UL << RCC_CICR_MSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (3U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (4U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_PLLRDYC_Pos (5U) +#define RCC_CICR_PLLRDYC_Msk (0x1UL << RCC_CICR_PLLRDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC_Msk +#define RCC_CICR_CSSC_Pos (8U) +#define RCC_CICR_CSSC_Msk (0x1UL << RCC_CICR_CSSC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_CSSC RCC_CICR_CSSC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_LSI2RDYC_Pos (11U) +#define RCC_CICR_LSI2RDYC_Msk (0x1UL << RCC_CICR_LSI2RDYC_Pos) /*!< 0x00000800 */ +#define RCC_CICR_LSI2RDYC RCC_CICR_LSI2RDYC_Msk + +/******************** Bit definition for RCC_SMPSCR register ******************/ +#define RCC_SMPSCR_SMPSSEL_Pos (0U) +#define RCC_SMPSCR_SMPSSEL_Msk (0x3UL << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000003 */ +#define RCC_SMPSCR_SMPSSEL RCC_SMPSCR_SMPSSEL_Msk +#define RCC_SMPSCR_SMPSSEL_0 (0x1U << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000001 */ +#define RCC_SMPSCR_SMPSSEL_1 (0x2U << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000002 */ + +#define RCC_SMPSCR_SMPSDIV_Pos (4U) +#define RCC_SMPSCR_SMPSDIV_Msk (0x3UL << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000030 */ +#define RCC_SMPSCR_SMPSDIV RCC_SMPSCR_SMPSDIV_Msk +#define RCC_SMPSCR_SMPSDIV_0 (0x1U << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000010 */ +#define RCC_SMPSCR_SMPSDIV_1 (0x2U << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000020 */ + +#define RCC_SMPSCR_SMPSSWS_Pos (8U) +#define RCC_SMPSCR_SMPSSWS_Msk (0x3UL << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000300 */ +#define RCC_SMPSCR_SMPSSWS RCC_SMPSCR_SMPSSWS_Msk +#define RCC_SMPSCR_SMPSSWS_0 (0x1U << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000100 */ +#define RCC_SMPSCR_SMPSSWS_1 (0x2U << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_DMA1RST_Pos (0U) +#define RCC_AHB1RSTR_DMA1RST_Msk (0x1UL << RCC_AHB1RSTR_DMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB1RSTR_DMA1RST RCC_AHB1RSTR_DMA1RST_Msk +#define RCC_AHB1RSTR_DMAMUX1RST_Pos (2U) +#define RCC_AHB1RSTR_DMAMUX1RST_Msk (0x1UL << RCC_AHB1RSTR_DMAMUX1RST_Pos) /*!< 0x00000004 */ +#define RCC_AHB1RSTR_DMAMUX1RST RCC_AHB1RSTR_DMAMUX1RST_Msk +#define RCC_AHB1RSTR_CRCRST_Pos (12U) +#define RCC_AHB1RSTR_CRCRST_Msk (0x1UL << RCC_AHB1RSTR_CRCRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB1RSTR_CRCRST RCC_AHB1RSTR_CRCRST_Msk +#define RCC_AHB1RSTR_TSCRST_Pos (16U) +#define RCC_AHB1RSTR_TSCRST_Msk (0x1UL << RCC_AHB1RSTR_TSCRST_Pos) /*!< 0x00010000 */ +#define RCC_AHB1RSTR_TSCRST RCC_AHB1RSTR_TSCRST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register ***************/ +#define RCC_AHB2RSTR_GPIOARST_Pos (0U) +#define RCC_AHB2RSTR_GPIOARST_Msk (0x1UL << RCC_AHB2RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB2RSTR_GPIOARST RCC_AHB2RSTR_GPIOARST_Msk +#define RCC_AHB2RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB2RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_GPIOBRST RCC_AHB2RSTR_GPIOBRST_Msk +#define RCC_AHB2RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB2RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB2RSTR_GPIOCRST RCC_AHB2RSTR_GPIOCRST_Msk +#define RCC_AHB2RSTR_GPIOERST_Pos (4U) +#define RCC_AHB2RSTR_GPIOERST_Msk (0x1UL << RCC_AHB2RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB2RSTR_GPIOERST RCC_AHB2RSTR_GPIOERST_Msk +#define RCC_AHB2RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB2RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB2RSTR_GPIOHRST RCC_AHB2RSTR_GPIOHRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register ***************/ +#define RCC_AHB3RSTR_PKARST_Pos (16U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00010000 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk +#define RCC_AHB3RSTR_AES2RST_Pos (17U) +#define RCC_AHB3RSTR_AES2RST_Msk (0x1UL << RCC_AHB3RSTR_AES2RST_Pos) /*!< 0x00020000 */ +#define RCC_AHB3RSTR_AES2RST RCC_AHB3RSTR_AES2RST_Msk +#define RCC_AHB3RSTR_RNGRST_Pos (18U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00040000 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HSEMRST_Pos (19U) +#define RCC_AHB3RSTR_HSEMRST_Msk (0x1UL << RCC_AHB3RSTR_HSEMRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB3RSTR_HSEMRST RCC_AHB3RSTR_HSEMRST_Msk +#define RCC_AHB3RSTR_IPCCRST_Pos (20U) +#define RCC_AHB3RSTR_IPCCRST_Msk (0x1UL << RCC_AHB3RSTR_IPCCRST_Pos) /*!< 0x00100000 */ +#define RCC_AHB3RSTR_IPCCRST RCC_AHB3RSTR_IPCCRST_Msk +#define RCC_AHB3RSTR_FLASHRST_Pos (25U) +#define RCC_AHB3RSTR_FLASHRST_Msk (0x1UL << RCC_AHB3RSTR_FLASHRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB3RSTR_FLASHRST RCC_AHB3RSTR_FLASHRST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register **************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_I2C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1RST RCC_APB1RSTR1_I2C1RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (31U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register **************/ +#define RCC_APB1RSTR2_LPTIM2RST_Pos (5U) +#define RCC_APB1RSTR2_LPTIM2RST_Msk (0x1UL << RCC_APB1RSTR2_LPTIM2RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_LPTIM2RST RCC_APB1RSTR2_LPTIM2RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_ADCRST_Pos (9U) +#define RCC_APB2RSTR_ADCRST_Msk (0x1UL << RCC_APB2RSTR_ADCRST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADCRST RCC_APB2RSTR_ADCRST_Msk +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk + +/******************** Bit definition for RCC_APB3RSTR register **************/ +#define RCC_APB3RSTR_RFRST_Pos (0U) +#define RCC_APB3RSTR_RFRST_Msk (0x1UL << RCC_APB3RSTR_RFRST_Pos) /*!< 0x00000001 */ +#define RCC_APB3RSTR_RFRST RCC_APB3RSTR_RFRST_Msk + +/******************** Bit definition for RCC_AHB1ENR register ****************/ +#define RCC_AHB1ENR_DMA1EN_Pos (0U) +#define RCC_AHB1ENR_DMA1EN_Msk (0x1UL << RCC_AHB1ENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB1ENR_DMA1EN RCC_AHB1ENR_DMA1EN_Msk +#define RCC_AHB1ENR_DMAMUX1EN_Pos (2U) +#define RCC_AHB1ENR_DMAMUX1EN_Msk (0x1UL << RCC_AHB1ENR_DMAMUX1EN_Pos) /*!< 0x00000004 */ +#define RCC_AHB1ENR_DMAMUX1EN RCC_AHB1ENR_DMAMUX1EN_Msk +#define RCC_AHB1ENR_CRCEN_Pos (12U) +#define RCC_AHB1ENR_CRCEN_Msk (0x1UL << RCC_AHB1ENR_CRCEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB1ENR_CRCEN RCC_AHB1ENR_CRCEN_Msk +#define RCC_AHB1ENR_TSCEN_Pos (16U) +#define RCC_AHB1ENR_TSCEN_Msk (0x1UL << RCC_AHB1ENR_TSCEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_TSCEN RCC_AHB1ENR_TSCEN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_GPIOAEN_Pos (0U) +#define RCC_AHB2ENR_GPIOAEN_Msk (0x1UL << RCC_AHB2ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB2ENR_GPIOAEN RCC_AHB2ENR_GPIOAEN_Msk +#define RCC_AHB2ENR_GPIOBEN_Pos (1U) +#define RCC_AHB2ENR_GPIOBEN_Msk (0x1UL << RCC_AHB2ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_GPIOBEN RCC_AHB2ENR_GPIOBEN_Msk +#define RCC_AHB2ENR_GPIOCEN_Pos (2U) +#define RCC_AHB2ENR_GPIOCEN_Msk (0x1UL << RCC_AHB2ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB2ENR_GPIOCEN RCC_AHB2ENR_GPIOCEN_Msk +#define RCC_AHB2ENR_GPIOEEN_Pos (4U) +#define RCC_AHB2ENR_GPIOEEN_Msk (0x1UL << RCC_AHB2ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB2ENR_GPIOEEN RCC_AHB2ENR_GPIOEEN_Msk +#define RCC_AHB2ENR_GPIOHEN_Pos (7U) +#define RCC_AHB2ENR_GPIOHEN_Msk (0x1UL << RCC_AHB2ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB2ENR_GPIOHEN RCC_AHB2ENR_GPIOHEN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_PKAEN_Pos (16U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk +#define RCC_AHB3ENR_AES2EN_Pos (17U) +#define RCC_AHB3ENR_AES2EN_Msk (0x1UL << RCC_AHB3ENR_AES2EN_Pos) /*!< 0x00020000 */ +#define RCC_AHB3ENR_AES2EN RCC_AHB3ENR_AES2EN_Msk +#define RCC_AHB3ENR_RNGEN_Pos (18U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00040000 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HSEMEN_Pos (19U) +#define RCC_AHB3ENR_HSEMEN_Msk (0x1UL << RCC_AHB3ENR_HSEMEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB3ENR_HSEMEN RCC_AHB3ENR_HSEMEN_Msk +#define RCC_AHB3ENR_IPCCEN_Pos (20U) +#define RCC_AHB3ENR_IPCCEN_Msk (0x1UL << RCC_AHB3ENR_IPCCEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB3ENR_IPCCEN RCC_AHB3ENR_IPCCEN_Msk +#define RCC_AHB3ENR_FLASHEN_Pos (25U) +#define RCC_AHB3ENR_FLASHEN_Msk (0x1UL << RCC_AHB3ENR_FLASHEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB3ENR_FLASHEN RCC_AHB3ENR_FLASHEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_RTCAPBEN_Pos (10U) +#define RCC_APB1ENR1_RTCAPBEN_Msk (0x1UL << RCC_APB1ENR1_RTCAPBEN_Pos) /*!< 0x00000400 */ +#define RCC_APB1ENR1_RTCAPBEN RCC_APB1ENR1_RTCAPBEN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_I2C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1EN RCC_APB1ENR1_I2C1EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (31U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_LPTIM2EN_Pos (5U) +#define RCC_APB1ENR2_LPTIM2EN_Msk (0x1UL << RCC_APB1ENR2_LPTIM2EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_LPTIM2EN RCC_APB1ENR2_LPTIM2EN_Msk + +/******************** Bit definition for RCC_APB2ENR register **************/ +#define RCC_APB2ENR_ADCEN_Pos (9U) +#define RCC_APB2ENR_ADCEN_Msk (0x1UL << RCC_APB2ENR_ADCEN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADCEN RCC_APB2ENR_ADCEN_Msk +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk + +/******************** Bit definition for RCC_AHB1SMENR register ****************/ +#define RCC_AHB1SMENR_DMA1SMEN_Pos (0U) +#define RCC_AHB1SMENR_DMA1SMEN_Msk (0x1UL << RCC_AHB1SMENR_DMA1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB1SMENR_DMA1SMEN RCC_AHB1SMENR_DMA1SMEN_Msk +#define RCC_AHB1SMENR_DMAMUX1SMEN_Pos (2U) +#define RCC_AHB1SMENR_DMAMUX1SMEN_Msk (0x1UL << RCC_AHB1SMENR_DMAMUX1SMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB1SMENR_DMAMUX1SMEN RCC_AHB1SMENR_DMAMUX1SMEN_Msk +#define RCC_AHB1SMENR_SRAM1SMEN_Pos (9U) +#define RCC_AHB1SMENR_SRAM1SMEN_Msk (0x1UL << RCC_AHB1SMENR_SRAM1SMEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB1SMENR_SRAM1SMEN RCC_AHB1SMENR_SRAM1SMEN_Msk +#define RCC_AHB1SMENR_CRCSMEN_Pos (12U) +#define RCC_AHB1SMENR_CRCSMEN_Msk (0x1UL << RCC_AHB1SMENR_CRCSMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB1SMENR_CRCSMEN RCC_AHB1SMENR_CRCSMEN_Msk +#define RCC_AHB1SMENR_TSCSMEN_Pos (16U) +#define RCC_AHB1SMENR_TSCSMEN_Msk (0x1UL << RCC_AHB1SMENR_TSCSMEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1SMENR_TSCSMEN RCC_AHB1SMENR_TSCSMEN_Msk + +/******************** Bit definition for RCC_AHB2SMENR register ***************/ +#define RCC_AHB2SMENR_GPIOASMEN_Pos (0U) +#define RCC_AHB2SMENR_GPIOASMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOASMEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB2SMENR_GPIOASMEN RCC_AHB2SMENR_GPIOASMEN_Msk +#define RCC_AHB2SMENR_GPIOBSMEN_Pos (1U) +#define RCC_AHB2SMENR_GPIOBSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOBSMEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2SMENR_GPIOBSMEN RCC_AHB2SMENR_GPIOBSMEN_Msk +#define RCC_AHB2SMENR_GPIOCSMEN_Pos (2U) +#define RCC_AHB2SMENR_GPIOCSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOCSMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB2SMENR_GPIOCSMEN RCC_AHB2SMENR_GPIOCSMEN_Msk +#define RCC_AHB2SMENR_GPIOESMEN_Pos (4U) +#define RCC_AHB2SMENR_GPIOESMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOESMEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB2SMENR_GPIOESMEN RCC_AHB2SMENR_GPIOESMEN_Msk +#define RCC_AHB2SMENR_GPIOHSMEN_Pos (7U) +#define RCC_AHB2SMENR_GPIOHSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOHSMEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB2SMENR_GPIOHSMEN RCC_AHB2SMENR_GPIOHSMEN_Msk + +/******************** Bit definition for RCC_AHB3SMENR register ***************/ +#define RCC_AHB3SMENR_PKASMEN_Pos (16U) +#define RCC_AHB3SMENR_PKASMEN_Msk (0x1UL << RCC_AHB3SMENR_PKASMEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB3SMENR_PKASMEN RCC_AHB3SMENR_PKASMEN_Msk +#define RCC_AHB3SMENR_AES2SMEN_Pos (17U) +#define RCC_AHB3SMENR_AES2SMEN_Msk (0x1UL << RCC_AHB3SMENR_AES2SMEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB3SMENR_AES2SMEN RCC_AHB3SMENR_AES2SMEN_Msk +#define RCC_AHB3SMENR_RNGSMEN_Pos (18U) +#define RCC_AHB3SMENR_RNGSMEN_Msk (0x1UL << RCC_AHB3SMENR_RNGSMEN_Pos) /*!< 0x00040000 */ +#define RCC_AHB3SMENR_RNGSMEN RCC_AHB3SMENR_RNGSMEN_Msk +#define RCC_AHB3SMENR_SRAM2SMEN_Pos (24U) +#define RCC_AHB3SMENR_SRAM2SMEN_Msk (0x1UL << RCC_AHB3SMENR_SRAM2SMEN_Pos) /*!< 0x01000000 */ +#define RCC_AHB3SMENR_SRAM2SMEN RCC_AHB3SMENR_SRAM2SMEN_Msk +#define RCC_AHB3SMENR_FLASHSMEN_Pos (25U) +#define RCC_AHB3SMENR_FLASHSMEN_Msk (0x1UL << RCC_AHB3SMENR_FLASHSMEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB3SMENR_FLASHSMEN RCC_AHB3SMENR_FLASHSMEN_Msk + +/******************** Bit definition for RCC_APB1SMENR1 register **************/ +#define RCC_APB1SMENR1_TIM2SMEN_Pos (0U) +#define RCC_APB1SMENR1_TIM2SMEN_Msk (0x1UL << RCC_APB1SMENR1_TIM2SMEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1SMENR1_TIM2SMEN RCC_APB1SMENR1_TIM2SMEN_Msk +#define RCC_APB1SMENR1_RTCAPBSMEN_Pos (10U) +#define RCC_APB1SMENR1_RTCAPBSMEN_Msk (0x1UL << RCC_APB1SMENR1_RTCAPBSMEN_Pos) /*!< 0x00000400 */ +#define RCC_APB1SMENR1_RTCAPBSMEN RCC_APB1SMENR1_RTCAPBSMEN_Msk +#define RCC_APB1SMENR1_WWDGSMEN_Pos (11U) +#define RCC_APB1SMENR1_WWDGSMEN_Msk (0x1UL << RCC_APB1SMENR1_WWDGSMEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1SMENR1_WWDGSMEN RCC_APB1SMENR1_WWDGSMEN_Msk +#define RCC_APB1SMENR1_I2C1SMEN_Pos (21U) +#define RCC_APB1SMENR1_I2C1SMEN_Msk (0x1UL << RCC_APB1SMENR1_I2C1SMEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1SMENR1_I2C1SMEN RCC_APB1SMENR1_I2C1SMEN_Msk +#define RCC_APB1SMENR1_LPTIM1SMEN_Pos (31U) +#define RCC_APB1SMENR1_LPTIM1SMEN_Msk (0x1UL << RCC_APB1SMENR1_LPTIM1SMEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1SMENR1_LPTIM1SMEN RCC_APB1SMENR1_LPTIM1SMEN_Msk + +/******************** Bit definition for RCC_APB1SMENR2 register **************/ +#define RCC_APB1SMENR2_LPTIM2SMEN_Pos (5U) +#define RCC_APB1SMENR2_LPTIM2SMEN_Msk (0x1UL << RCC_APB1SMENR2_LPTIM2SMEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1SMENR2_LPTIM2SMEN RCC_APB1SMENR2_LPTIM2SMEN_Msk + +/******************** Bit definition for RCC_APB2SMENR register **************/ +#define RCC_APB2SMENR_ADCSMEN_Pos (9U) +#define RCC_APB2SMENR_ADCSMEN_Msk (0x1UL << RCC_APB2SMENR_ADCSMEN_Pos) /*!< 0x00000200 */ +#define RCC_APB2SMENR_ADCSMEN RCC_APB2SMENR_ADCSMEN_Msk +#define RCC_APB2SMENR_TIM1SMEN_Pos (11U) +#define RCC_APB2SMENR_TIM1SMEN_Msk (0x1UL << RCC_APB2SMENR_TIM1SMEN_Pos) /*!< 0x00000800 */ +#define RCC_APB2SMENR_TIM1SMEN RCC_APB2SMENR_TIM1SMEN_Msk +#define RCC_APB2SMENR_SPI1SMEN_Pos (12U) +#define RCC_APB2SMENR_SPI1SMEN_Msk (0x1UL << RCC_APB2SMENR_SPI1SMEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2SMENR_SPI1SMEN RCC_APB2SMENR_SPI1SMEN_Msk +#define RCC_APB2SMENR_USART1SMEN_Pos (14U) +#define RCC_APB2SMENR_USART1SMEN_Msk (0x1UL << RCC_APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */ +#define RCC_APB2SMENR_USART1SMEN RCC_APB2SMENR_USART1SMEN_Msk + +/******************** Bit definition for RCC_CCIPR register ******************/ +#define RCC_CCIPR_USART1SEL_Pos (0U) +#define RCC_CCIPR_USART1SEL_Msk (0x3UL << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR_USART1SEL RCC_CCIPR_USART1SEL_Msk +#define RCC_CCIPR_USART1SEL_0 (0x1U << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR_USART1SEL_1 (0x2U << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR_I2C1SEL_Pos (12U) +#define RCC_CCIPR_I2C1SEL_Msk (0x3UL << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR_I2C1SEL RCC_CCIPR_I2C1SEL_Msk +#define RCC_CCIPR_I2C1SEL_0 (0x1U << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR_I2C1SEL_1 (0x2U << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR_LPTIM1SEL_Pos (18U) +#define RCC_CCIPR_LPTIM1SEL_Msk (0x3UL << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x000C0000 */ +#define RCC_CCIPR_LPTIM1SEL RCC_CCIPR_LPTIM1SEL_Msk +#define RCC_CCIPR_LPTIM1SEL_0 (0x1U << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR_LPTIM1SEL_1 (0x2U << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00080000 */ + +#define RCC_CCIPR_LPTIM2SEL_Pos (20U) +#define RCC_CCIPR_LPTIM2SEL_Msk (0x3UL << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00300000 */ +#define RCC_CCIPR_LPTIM2SEL RCC_CCIPR_LPTIM2SEL_Msk +#define RCC_CCIPR_LPTIM2SEL_0 (0x1U << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR_LPTIM2SEL_1 (0x2U << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00200000 */ + +#define RCC_CCIPR_CLK48SEL_Pos (26U) +#define RCC_CCIPR_CLK48SEL_Msk (0x3UL << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x0C000000 */ +#define RCC_CCIPR_CLK48SEL RCC_CCIPR_CLK48SEL_Msk +#define RCC_CCIPR_CLK48SEL_0 (0x1U << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x04000000 */ +#define RCC_CCIPR_CLK48SEL_1 (0x2U << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x08000000 */ + +#define RCC_CCIPR_ADCSEL_Pos (28U) +#define RCC_CCIPR_ADCSEL_Msk (0x3UL << RCC_CCIPR_ADCSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR_ADCSEL RCC_CCIPR_ADCSEL_Msk +#define RCC_CCIPR_ADCSEL_0 (0x1U << RCC_CCIPR_ADCSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR_ADCSEL_1 (0x2U << RCC_CCIPR_ADCSEL_Pos) /*!< 0x20000000 */ + +#define RCC_CCIPR_RNGSEL_Pos (30U) +#define RCC_CCIPR_RNGSEL_Msk (0x3UL << RCC_CCIPR_RNGSEL_Pos) /*!< 0xC0000000 */ +#define RCC_CCIPR_RNGSEL RCC_CCIPR_RNGSEL_Msk +#define RCC_CCIPR_RNGSEL_0 (0x1U << RCC_CCIPR_RNGSEL_Pos) /*!< 0x40000000 */ +#define RCC_CCIPR_RNGSEL_1 (0x2U << RCC_CCIPR_RNGSEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk + +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1U << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2U << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk + +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk + +#define RCC_BDCR_LSCOEN_Pos (24U) +#define RCC_BDCR_LSCOEN_Msk (0x1UL << RCC_BDCR_LSCOEN_Pos) /*!< 0x01000000 */ +#define RCC_BDCR_LSCOEN RCC_BDCR_LSCOEN_Msk +#define RCC_BDCR_LSCOSEL_Pos (25U) +#define RCC_BDCR_LSCOSEL_Msk (0x1UL << RCC_BDCR_LSCOSEL_Pos) /*!< 0x02000000 */ +#define RCC_BDCR_LSCOSEL RCC_BDCR_LSCOSEL_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSI1ON_Pos (0U) +#define RCC_CSR_LSI1ON_Msk (0x1UL << RCC_CSR_LSI1ON_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSI1ON RCC_CSR_LSI1ON_Msk +#define RCC_CSR_LSI1RDY_Pos (1U) +#define RCC_CSR_LSI1RDY_Msk (0x1UL << RCC_CSR_LSI1RDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSI1RDY RCC_CSR_LSI1RDY_Msk +#define RCC_CSR_LSI2ON_Pos (2U) +#define RCC_CSR_LSI2ON_Msk (0x1UL << RCC_CSR_LSI2ON_Pos) /*!< 0x00000004 */ +#define RCC_CSR_LSI2ON RCC_CSR_LSI2ON_Msk +#define RCC_CSR_LSI2RDY_Pos (3U) +#define RCC_CSR_LSI2RDY_Msk (0x1UL << RCC_CSR_LSI2RDY_Pos) /*!< 0x00000008 */ +#define RCC_CSR_LSI2RDY RCC_CSR_LSI2RDY_Msk +#define RCC_CSR_LSI2TRIM_Pos (8U) +#define RCC_CSR_LSI2TRIM_Msk (0xFUL << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000F00 */ +#define RCC_CSR_LSI2TRIM RCC_CSR_LSI2TRIM_Msk +#define RCC_CSR_LSI2TRIM_0 (0x1U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000100 */ +#define RCC_CSR_LSI2TRIM_1 (0x2U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000200 */ +#define RCC_CSR_LSI2TRIM_2 (0x4U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000400 */ +#define RCC_CSR_LSI2TRIM_3 (0x8U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000800 */ +#define RCC_CSR_RFWKPSEL_Pos (14U) +#define RCC_CSR_RFWKPSEL_Msk (0x3UL << RCC_CSR_RFWKPSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CSR_RFWKPSEL RCC_CSR_RFWKPSEL_Msk +#define RCC_CSR_RFWKPSEL_0 (0x1U << RCC_CSR_RFWKPSEL_Pos) /*!< 0x00004000 */ +#define RCC_CSR_RFWKPSEL_1 (0x2U << RCC_CSR_RFWKPSEL_Pos) /*!< 0x00008000 */ +#define RCC_CSR_RFRSTS_Pos (16U) +#define RCC_CSR_RFRSTS_Msk (0x1UL << RCC_CSR_RFRSTS_Pos) /*!< 0x00010000 */ +#define RCC_CSR_RFRSTS RCC_CSR_RFRSTS_Msk +#define RCC_CSR_RMVF_Pos (23U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x00800000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk +#define RCC_CSR_OBLRSTF_Pos (25U) +#define RCC_CSR_OBLRSTF_Msk (0x1UL << RCC_CSR_OBLRSTF_Pos) /*!< 0x02000000 */ +#define RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF_Msk +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk +#define RCC_CSR_BORRSTF_Pos (27U) +#define RCC_CSR_BORRSTF_Msk (0x1UL << RCC_CSR_BORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_BORRSTF RCC_CSR_BORRSTF_Msk +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_HSECR register *******************/ +#define RCC_HSECR_UNLOCKED_Pos (0U) +#define RCC_HSECR_UNLOCKED_Msk (0x1UL << RCC_HSECR_UNLOCKED_Pos) /*!< 0x00000001 */ +#define RCC_HSECR_UNLOCKED RCC_HSECR_UNLOCKED_Msk + +#define RCC_HSECR_HSES_Pos (3U) +#define RCC_HSECR_HSES_Msk (0x1UL << RCC_HSECR_HSES_Pos) /*!< 0x00000008 */ +#define RCC_HSECR_HSES RCC_HSECR_HSES_Msk + +#define RCC_HSECR_HSEGMC_Pos (4U) +#define RCC_HSECR_HSEGMC_Msk (0x7UL << RCC_HSECR_HSEGMC_Pos) /*!< 0x00000070 */ +#define RCC_HSECR_HSEGMC RCC_HSECR_HSEGMC_Msk +#define RCC_HSECR_HSEGMC0_Pos (4U) +#define RCC_HSECR_HSEGMC0_Msk (0x1UL << RCC_HSECR_HSEGMC0_Pos) /*!< 0x00000010 */ +#define RCC_HSECR_HSEGMC0 RCC_HSECR_HSEGMC0_Msk +#define RCC_HSECR_HSEGMC1_Pos (5U) +#define RCC_HSECR_HSEGMC1_Msk (0x1UL << RCC_HSECR_HSEGMC1_Pos) /*!< 0x00000020 */ +#define RCC_HSECR_HSEGMC1 RCC_HSECR_HSEGMC1_Msk +#define RCC_HSECR_HSEGMC2_Pos (6U) +#define RCC_HSECR_HSEGMC2_Msk (0x1UL << RCC_HSECR_HSEGMC2_Pos) /*!< 0x00000040 */ +#define RCC_HSECR_HSEGMC2 RCC_HSECR_HSEGMC2_Msk + +#define RCC_HSECR_HSETUNE_Pos (8U) +#define RCC_HSECR_HSETUNE_Msk (0x3FUL << RCC_HSECR_HSETUNE_Pos) /*!< 0x00003F00 */ +#define RCC_HSECR_HSETUNE RCC_HSECR_HSETUNE_Msk +#define RCC_HSECR_HSETUNE0_Pos (8U) +#define RCC_HSECR_HSETUNE0_Msk (0x1UL << RCC_HSECR_HSETUNE0_Pos) /*!< 0x00000100 */ +#define RCC_HSECR_HSETUNE0 RCC_HSECR_HSETUNE0_Msk +#define RCC_HSECR_HSETUNE1_Pos (9U) +#define RCC_HSECR_HSETUNE1_Msk (0x1UL << RCC_HSECR_HSETUNE1_Pos) /*!< 0x00000200 */ +#define RCC_HSECR_HSETUNE1 RCC_HSECR_HSETUNE1_Msk +#define RCC_HSECR_HSETUNE2_Pos (10U) +#define RCC_HSECR_HSETUNE2_Msk (0x1UL << RCC_HSECR_HSETUNE2_Pos) /*!< 0x00000400 */ +#define RCC_HSECR_HSETUNE2 RCC_HSECR_HSETUNE2_Msk +#define RCC_HSECR_HSETUNE3_Pos (11U) +#define RCC_HSECR_HSETUNE3_Msk (0x1UL << RCC_HSECR_HSETUNE3_Pos) /*!< 0x00000800 */ +#define RCC_HSECR_HSETUNE3 RCC_HSECR_HSETUNE3_Msk +#define RCC_HSECR_HSETUNE4_Pos (12U) +#define RCC_HSECR_HSETUNE4_Msk (0x1UL << RCC_HSECR_HSETUNE4_Pos) /*!< 0x00001000 */ +#define RCC_HSECR_HSETUNE4 RCC_HSECR_HSETUNE4_Msk +#define RCC_HSECR_HSETUNE5_Pos (13U) +#define RCC_HSECR_HSETUNE5_Msk (0x1UL << RCC_HSECR_HSETUNE5_Pos) /*!< 0x00002000 */ +#define RCC_HSECR_HSETUNE5 RCC_HSECR_HSETUNE5_Msk + +/******************** Bit definition for RCC_EXTCFGR register *******************/ +#define RCC_EXTCFGR_SHDHPRE_Pos (0U) +#define RCC_EXTCFGR_SHDHPRE_Msk (0xFUL << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x0000000F */ +#define RCC_EXTCFGR_SHDHPRE RCC_EXTCFGR_SHDHPRE_Msk +#define RCC_EXTCFGR_SHDHPRE_0 (0x1U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000001 */ +#define RCC_EXTCFGR_SHDHPRE_1 (0x2U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000002 */ +#define RCC_EXTCFGR_SHDHPRE_2 (0x4U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000004 */ +#define RCC_EXTCFGR_SHDHPRE_3 (0x8U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000008 */ + +#define RCC_EXTCFGR_C2HPRE_Pos (4U) +#define RCC_EXTCFGR_C2HPRE_Msk (0xFUL << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_EXTCFGR_C2HPRE RCC_EXTCFGR_C2HPRE_Msk +#define RCC_EXTCFGR_C2HPRE_0 (0x1U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000010 */ +#define RCC_EXTCFGR_C2HPRE_1 (0x2U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000020 */ +#define RCC_EXTCFGR_C2HPRE_2 (0x4U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000040 */ +#define RCC_EXTCFGR_C2HPRE_3 (0x8U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_EXTCFGR_SHDHPREF_Pos (16U) +#define RCC_EXTCFGR_SHDHPREF_Msk (0x1UL << RCC_EXTCFGR_SHDHPREF_Pos) /*!< 0x00010000 */ +#define RCC_EXTCFGR_SHDHPREF RCC_EXTCFGR_SHDHPREF_Msk +#define RCC_EXTCFGR_C2HPREF_Pos (17U) +#define RCC_EXTCFGR_C2HPREF_Msk (0x1UL << RCC_EXTCFGR_C2HPREF_Pos) /*!< 0x00020000 */ +#define RCC_EXTCFGR_C2HPREF RCC_EXTCFGR_C2HPREF_Msk +#define RCC_EXTCFGR_RFCSS_Pos (20U) +#define RCC_EXTCFGR_RFCSS_Msk (0x1UL << RCC_EXTCFGR_RFCSS_Pos) /*!< 0x00100000 */ +#define RCC_EXTCFGR_RFCSS RCC_EXTCFGR_RFCSS_Msk + +/******************** Bit definition for RCC_C2AHB1ENR register ****************/ +#define RCC_C2AHB1ENR_DMA1EN_Pos (0U) +#define RCC_C2AHB1ENR_DMA1EN_Msk (0x1UL << RCC_C2AHB1ENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB1ENR_DMA1EN RCC_C2AHB1ENR_DMA1EN_Msk +#define RCC_C2AHB1ENR_DMAMUX1EN_Pos (2U) +#define RCC_C2AHB1ENR_DMAMUX1EN_Msk (0x1UL << RCC_C2AHB1ENR_DMAMUX1EN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB1ENR_DMAMUX1EN RCC_C2AHB1ENR_DMAMUX1EN_Msk +#define RCC_C2AHB1ENR_SRAM1EN_Pos (9U) +#define RCC_C2AHB1ENR_SRAM1EN_Msk (0x1UL << RCC_C2AHB1ENR_SRAM1EN_Pos) /*!< 0x00000200 */ +#define RCC_C2AHB1ENR_SRAM1EN RCC_C2AHB1ENR_SRAM1EN_Msk +#define RCC_C2AHB1ENR_CRCEN_Pos (12U) +#define RCC_C2AHB1ENR_CRCEN_Msk (0x1UL << RCC_C2AHB1ENR_CRCEN_Pos) /*!< 0x00001000 */ +#define RCC_C2AHB1ENR_CRCEN RCC_C2AHB1ENR_CRCEN_Msk +#define RCC_C2AHB1ENR_TSCEN_Pos (16U) +#define RCC_C2AHB1ENR_TSCEN_Msk (0x1UL << RCC_C2AHB1ENR_TSCEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB1ENR_TSCEN RCC_C2AHB1ENR_TSCEN_Msk + +/******************** Bit definition for RCC_C2AHB2ENR register ***************/ +#define RCC_C2AHB2ENR_GPIOAEN_Pos (0U) +#define RCC_C2AHB2ENR_GPIOAEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB2ENR_GPIOAEN RCC_C2AHB2ENR_GPIOAEN_Msk +#define RCC_C2AHB2ENR_GPIOBEN_Pos (1U) +#define RCC_C2AHB2ENR_GPIOBEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_C2AHB2ENR_GPIOBEN RCC_C2AHB2ENR_GPIOBEN_Msk +#define RCC_C2AHB2ENR_GPIOCEN_Pos (2U) +#define RCC_C2AHB2ENR_GPIOCEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB2ENR_GPIOCEN RCC_C2AHB2ENR_GPIOCEN_Msk +#define RCC_C2AHB2ENR_GPIOEEN_Pos (4U) +#define RCC_C2AHB2ENR_GPIOEEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_C2AHB2ENR_GPIOEEN RCC_C2AHB2ENR_GPIOEEN_Msk +#define RCC_C2AHB2ENR_GPIOHEN_Pos (7U) +#define RCC_C2AHB2ENR_GPIOHEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_C2AHB2ENR_GPIOHEN RCC_C2AHB2ENR_GPIOHEN_Msk + +/******************** Bit definition for RCC_C2AHB3ENR register ***************/ +#define RCC_C2AHB3ENR_PKAEN_Pos (16U) +#define RCC_C2AHB3ENR_PKAEN_Msk (0x1UL << RCC_C2AHB3ENR_PKAEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB3ENR_PKAEN RCC_C2AHB3ENR_PKAEN_Msk +#define RCC_C2AHB3ENR_AES2EN_Pos (17U) +#define RCC_C2AHB3ENR_AES2EN_Msk (0x1UL << RCC_C2AHB3ENR_AES2EN_Pos) /*!< 0x00020000 */ +#define RCC_C2AHB3ENR_AES2EN RCC_C2AHB3ENR_AES2EN_Msk +#define RCC_C2AHB3ENR_RNGEN_Pos (18U) +#define RCC_C2AHB3ENR_RNGEN_Msk (0x1UL << RCC_C2AHB3ENR_RNGEN_Pos) /*!< 0x00040000 */ +#define RCC_C2AHB3ENR_RNGEN RCC_C2AHB3ENR_RNGEN_Msk +#define RCC_C2AHB3ENR_HSEMEN_Pos (19U) +#define RCC_C2AHB3ENR_HSEMEN_Msk (0x1UL << RCC_C2AHB3ENR_HSEMEN_Pos) /*!< 0x00080000 */ +#define RCC_C2AHB3ENR_HSEMEN RCC_C2AHB3ENR_HSEMEN_Msk +#define RCC_C2AHB3ENR_IPCCEN_Pos (20U) +#define RCC_C2AHB3ENR_IPCCEN_Msk (0x1UL << RCC_C2AHB3ENR_IPCCEN_Pos) /*!< 0x00100000 */ +#define RCC_C2AHB3ENR_IPCCEN RCC_C2AHB3ENR_IPCCEN_Msk +#define RCC_C2AHB3ENR_FLASHEN_Pos (25U) +#define RCC_C2AHB3ENR_FLASHEN_Msk (0x1UL << RCC_C2AHB3ENR_FLASHEN_Pos) /*!< 0x02000000 */ +#define RCC_C2AHB3ENR_FLASHEN RCC_C2AHB3ENR_FLASHEN_Msk + +/******************** Bit definition for RCC_C2APB1ENR1 register **************/ +#define RCC_C2APB1ENR1_TIM2EN_Pos (0U) +#define RCC_C2APB1ENR1_TIM2EN_Msk (0x1UL << RCC_C2APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1ENR1_TIM2EN RCC_C2APB1ENR1_TIM2EN_Msk +#define RCC_C2APB1ENR1_RTCAPBEN_Pos (10U) +#define RCC_C2APB1ENR1_RTCAPBEN_Msk (0x1UL << RCC_C2APB1ENR1_RTCAPBEN_Pos) /*!< 0x00000400 */ +#define RCC_C2APB1ENR1_RTCAPBEN RCC_C2APB1ENR1_RTCAPBEN_Msk +#define RCC_C2APB1ENR1_I2C1EN_Pos (21U) +#define RCC_C2APB1ENR1_I2C1EN_Msk (0x1UL << RCC_C2APB1ENR1_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_C2APB1ENR1_I2C1EN RCC_C2APB1ENR1_I2C1EN_Msk +#define RCC_C2APB1ENR1_LPTIM1EN_Pos (31U) +#define RCC_C2APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_C2APB1ENR1_LPTIM1EN_Pos) /*!< 0x80000000 */ +#define RCC_C2APB1ENR1_LPTIM1EN RCC_C2APB1ENR1_LPTIM1EN_Msk + +/******************** Bit definition for RCC_C2APB1ENR2 register **************/ +#define RCC_C2APB1ENR2_LPTIM2EN_Pos (5U) +#define RCC_C2APB1ENR2_LPTIM2EN_Msk (0x1UL << RCC_C2APB1ENR2_LPTIM2EN_Pos) /*!< 0x00000020 */ +#define RCC_C2APB1ENR2_LPTIM2EN RCC_C2APB1ENR2_LPTIM2EN_Msk + +/******************** Bit definition for RCC_C2APB2ENR register **************/ +#define RCC_C2APB2ENR_ADCEN_Pos (9U) +#define RCC_C2APB2ENR_ADCEN_Msk (0x1UL << RCC_C2APB2ENR_ADCEN_Pos) /*!< 0x00000200 */ +#define RCC_C2APB2ENR_ADCEN RCC_C2APB2ENR_ADCEN_Msk +#define RCC_C2APB2ENR_TIM1EN_Pos (11U) +#define RCC_C2APB2ENR_TIM1EN_Msk (0x1UL << RCC_C2APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_C2APB2ENR_TIM1EN RCC_C2APB2ENR_TIM1EN_Msk +#define RCC_C2APB2ENR_SPI1EN_Pos (12U) +#define RCC_C2APB2ENR_SPI1EN_Msk (0x1UL << RCC_C2APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_C2APB2ENR_SPI1EN RCC_C2APB2ENR_SPI1EN_Msk +#define RCC_C2APB2ENR_USART1EN_Pos (14U) +#define RCC_C2APB2ENR_USART1EN_Msk (0x1UL << RCC_C2APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_C2APB2ENR_USART1EN RCC_C2APB2ENR_USART1EN_Msk + +/******************** Bit definition for RCC_C2APB3ENR register **************/ +#define RCC_C2APB3ENR_BLEEN_Pos (0U) +#define RCC_C2APB3ENR_BLEEN_Msk (0x1UL << RCC_C2APB3ENR_BLEEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB3ENR_BLEEN RCC_C2APB3ENR_BLEEN_Msk + +/******************** Bit definition for RCC_C2AHB1SMENR register ****************/ +#define RCC_C2AHB1SMENR_DMA1SMEN_Pos (0U) +#define RCC_C2AHB1SMENR_DMA1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_DMA1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB1SMENR_DMA1SMEN RCC_C2AHB1SMENR_DMA1SMEN_Msk +#define RCC_C2AHB1SMENR_DMAMUX1SMEN_Pos (2U) +#define RCC_C2AHB1SMENR_DMAMUX1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_DMAMUX1SMEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB1SMENR_DMAMUX1SMEN RCC_C2AHB1SMENR_DMAMUX1SMEN_Msk +#define RCC_C2AHB1SMENR_SRAM1SMEN_Pos (9U) +#define RCC_C2AHB1SMENR_SRAM1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_SRAM1SMEN_Pos) /*!< 0x00000200 */ +#define RCC_C2AHB1SMENR_SRAM1SMEN RCC_C2AHB1SMENR_SRAM1SMEN_Msk +#define RCC_C2AHB1SMENR_CRCSMEN_Pos (12U) +#define RCC_C2AHB1SMENR_CRCSMEN_Msk (0x1UL << RCC_C2AHB1SMENR_CRCSMEN_Pos) /*!< 0x00001000 */ +#define RCC_C2AHB1SMENR_CRCSMEN RCC_C2AHB1SMENR_CRCSMEN_Msk +#define RCC_C2AHB1SMENR_TSCSMEN_Pos (16U) +#define RCC_C2AHB1SMENR_TSCSMEN_Msk (0x1UL << RCC_C2AHB1SMENR_TSCSMEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB1SMENR_TSCSMEN RCC_C2AHB1SMENR_TSCSMEN_Msk + +/******************** Bit definition for RCC_C2AHB2SMENR register ***************/ +#define RCC_C2AHB2SMENR_GPIOASMEN_Pos (0U) +#define RCC_C2AHB2SMENR_GPIOASMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOASMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB2SMENR_GPIOASMEN RCC_C2AHB2SMENR_GPIOASMEN_Msk +#define RCC_C2AHB2SMENR_GPIOBSMEN_Pos (1U) +#define RCC_C2AHB2SMENR_GPIOBSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOBSMEN_Pos) /*!< 0x00000002 */ +#define RCC_C2AHB2SMENR_GPIOBSMEN RCC_C2AHB2SMENR_GPIOBSMEN_Msk +#define RCC_C2AHB2SMENR_GPIOCSMEN_Pos (2U) +#define RCC_C2AHB2SMENR_GPIOCSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOCSMEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB2SMENR_GPIOCSMEN RCC_C2AHB2SMENR_GPIOCSMEN_Msk +#define RCC_C2AHB2SMENR_GPIOESMEN_Pos (4U) +#define RCC_C2AHB2SMENR_GPIOESMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOESMEN_Pos) /*!< 0x00000010 */ +#define RCC_C2AHB2SMENR_GPIOESMEN RCC_C2AHB2SMENR_GPIOESMEN_Msk +#define RCC_C2AHB2SMENR_GPIOHSMEN_Pos (7U) +#define RCC_C2AHB2SMENR_GPIOHSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOHSMEN_Pos) /*!< 0x00000080 */ +#define RCC_C2AHB2SMENR_GPIOHSMEN RCC_C2AHB2SMENR_GPIOHSMEN_Msk + +/******************** Bit definition for RCC_C2AHB3SMENR register ***************/ +#define RCC_C2AHB3SMENR_PKASMEN_Pos (16U) +#define RCC_C2AHB3SMENR_PKASMEN_Msk (0x1UL << RCC_C2AHB3SMENR_PKASMEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB3SMENR_PKASMEN RCC_C2AHB3SMENR_PKASMEN_Msk +#define RCC_C2AHB3SMENR_AES2SMEN_Pos (17U) +#define RCC_C2AHB3SMENR_AES2SMEN_Msk (0x1UL << RCC_C2AHB3SMENR_AES2SMEN_Pos) /*!< 0x00020000 */ +#define RCC_C2AHB3SMENR_AES2SMEN RCC_C2AHB3SMENR_AES2SMEN_Msk +#define RCC_C2AHB3SMENR_RNGSMEN_Pos (18U) +#define RCC_C2AHB3SMENR_RNGSMEN_Msk (0x1UL << RCC_C2AHB3SMENR_RNGSMEN_Pos) /*!< 0x00040000 */ +#define RCC_C2AHB3SMENR_RNGSMEN RCC_C2AHB3SMENR_RNGSMEN_Msk +#define RCC_C2AHB3SMENR_SRAM2SMEN_Pos (24U) +#define RCC_C2AHB3SMENR_SRAM2SMEN_Msk (0x1UL << RCC_C2AHB3SMENR_SRAM2SMEN_Pos) /*!< 0x01000000 */ +#define RCC_C2AHB3SMENR_SRAM2SMEN RCC_C2AHB3SMENR_SRAM2SMEN_Msk +#define RCC_C2AHB3SMENR_FLASHSMEN_Pos (25U) +#define RCC_C2AHB3SMENR_FLASHSMEN_Msk (0x1UL << RCC_C2AHB3SMENR_FLASHSMEN_Pos) /*!< 0x02000000 */ +#define RCC_C2AHB3SMENR_FLASHSMEN RCC_C2AHB3SMENR_FLASHSMEN_Msk + +/******************** Bit definition for RCC_C2APB1SMENR1 register **************/ +#define RCC_C2APB1SMENR1_TIM2SMEN_Pos (0U) +#define RCC_C2APB1SMENR1_TIM2SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_TIM2SMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1SMENR1_TIM2SMEN RCC_C2APB1SMENR1_TIM2SMEN_Msk +#define RCC_C2APB1SMENR1_RTCAPBSMEN_Pos (10U) +#define RCC_C2APB1SMENR1_RTCAPBSMEN_Msk (0x1UL << RCC_C2APB1SMENR1_RTCAPBSMEN_Pos) /*!< 0x00000400 */ +#define RCC_C2APB1SMENR1_RTCAPBSMEN RCC_C2APB1SMENR1_RTCAPBSMEN_Msk +#define RCC_C2APB1SMENR1_I2C1SMEN_Pos (21U) +#define RCC_C2APB1SMENR1_I2C1SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_I2C1SMEN_Pos) /*!< 0x00200000 */ +#define RCC_C2APB1SMENR1_I2C1SMEN RCC_C2APB1SMENR1_I2C1SMEN_Msk +#define RCC_C2APB1SMENR1_LPTIM1SMEN_Pos (31U) +#define RCC_C2APB1SMENR1_LPTIM1SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_LPTIM1SMEN_Pos) /*!< 0x80000000 */ +#define RCC_C2APB1SMENR1_LPTIM1SMEN RCC_C2APB1SMENR1_LPTIM1SMEN_Msk + +/******************** Bit definition for RCC_C2APB1SMENR2 register **************/ +#define RCC_C2APB1SMENR2_LPTIM2SMEN_Pos (5U) +#define RCC_C2APB1SMENR2_LPTIM2SMEN_Msk (0x1UL << RCC_C2APB1SMENR2_LPTIM2SMEN_Pos) /*!< 0x00000020 */ +#define RCC_C2APB1SMENR2_LPTIM2SMEN RCC_C2APB1SMENR2_LPTIM2SMEN_Msk + +/******************** Bit definition for RCC_C2APB2SMENR register **************/ +#define RCC_C2APB2SMENR_ADCSMEN_Pos (9U) +#define RCC_C2APB2SMENR_ADCSMEN_Msk (0x1UL << RCC_C2APB2SMENR_ADCSMEN_Pos) /*!< 0x00000200 */ +#define RCC_C2APB2SMENR_ADCSMEN RCC_C2APB2SMENR_ADCSMEN_Msk +#define RCC_C2APB2SMENR_TIM1SMEN_Pos (11U) +#define RCC_C2APB2SMENR_TIM1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_TIM1SMEN_Pos) /*!< 0x00000800 */ +#define RCC_C2APB2SMENR_TIM1SMEN RCC_C2APB2SMENR_TIM1SMEN_Msk +#define RCC_C2APB2SMENR_SPI1SMEN_Pos (12U) +#define RCC_C2APB2SMENR_SPI1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_SPI1SMEN_Pos) /*!< 0x00001000 */ +#define RCC_C2APB2SMENR_SPI1SMEN RCC_C2APB2SMENR_SPI1SMEN_Msk +#define RCC_C2APB2SMENR_USART1SMEN_Pos (14U) +#define RCC_C2APB2SMENR_USART1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */ +#define RCC_C2APB2SMENR_USART1SMEN RCC_C2APB2SMENR_USART1SMEN_Msk + +/******************** Bit definition for RCC_C2APB3SMENR register **************/ +#define RCC_C2APB3SMENR_BLESMEN_Pos (0U) +#define RCC_C2APB3SMENR_BLESMEN_Msk (0x1UL << RCC_C2APB3SMENR_BLESMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB3SMENR_BLESMEN RCC_C2APB3SMENR_BLESMEN_Msk + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define RTC_TAMPER2_SUPPORT +#define RTC_WAKEUP_SUPPORT +#define RTC_BACKUP_SUPPORT +#define RTC_CPU2_SUPPORT_D +#define RTC_INTERNALTS_SUPPORT + +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk /*!< AM/PM notation */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk /*!< Hour tens in BCD format */ +#define RTC_TR_HT_0 (0x1U << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2U << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk /*!< Hour units in BCD format */ +#define RTC_TR_HU_0 (0x1U << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2U << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4U << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8U << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk /*!< Minute tens in BCD format */ +#define RTC_TR_MNT_0 (0x1U << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2U << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4U << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk /*!< Minute unit in BCD format */ +#define RTC_TR_MNU_0 (0x1U << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2U << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4U << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8U << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk /*!< Second tens in BCD format */ +#define RTC_TR_ST_0 (0x1U << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2U << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4U << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk /*!< Second units in BCD format */ +#define RTC_TR_SU_0 (0x1U << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2U << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4U << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8U << RTC_TR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk /*!< Year tens in BCD format */ +#define RTC_DR_YT_0 (0x1U << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2U << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4U << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8U << RTC_DR_YT_Pos) /*!< 0x00800000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk /*!< Years units in BCD format */ +#define RTC_DR_YU_0 (0x1U << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2U << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4U << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8U << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk /*!< Week day units */ +#define RTC_DR_WDU_0 (0x1U << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2U << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4U << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk /*!< Month tens in BCD format */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk /*!< Month units in BCD format */ +#define RTC_DR_MU_0 (0x1U << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2U << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4U << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8U << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk /*!< Date tens in BCD format */ +#define RTC_DR_DT_0 (0x1U << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2U << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk /*!< Date units in BCD format */ +#define RTC_DR_DU_0 (0x1U << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2U << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4U << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8U << RTC_DR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk /*!< Calibration output enable */ +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk /*!< Output selection */ +#define RTC_CR_OSEL_0 (0x1U << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2U << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk /*!< Ouput polarity */ +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk /*!< Calibration ouput selection */ +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk /*!< Backup */ +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk /*!< Subtract 1 hour (winter time change) */ +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk /*!< Add 1 hour (summer time change) */ +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Time-stamp interrupt enable */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk /*!< Alarm B interrupt enable */ +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk /*!< Alarm A interrupt enable */ +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< Timestamp on RTC TS input edge enable */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk /*!< Alarm B enable */ +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk /*!< Alarm A enable */ +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk /*!< Hour AM/PM or 24H format */ +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk /*!< Bypass the shadow registers */ +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk /*!< RTC_REFIN reference clock detection enable (50 or 60 Hz) */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakekup clock selection */ +#define RTC_CR_WUCKSEL_0 (0x1U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_ISR register ******************/ +#define RTC_ISR_ITSF_Pos (17U) +#define RTC_ISR_ITSF_Msk (0x1UL << RTC_ISR_ITSF_Pos) /*!< 0x00020000 */ +#define RTC_ISR_ITSF RTC_ISR_ITSF_Msk /*!< Internal timestamp flag */ +#define RTC_ISR_RECALPF_Pos (16U) +#define RTC_ISR_RECALPF_Msk (0x1UL << RTC_ISR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ISR_RECALPF RTC_ISR_RECALPF_Msk /*!< Recalibration pending flag */ +#define RTC_ISR_TAMP2F_Pos (14U) +#define RTC_ISR_TAMP2F_Msk (0x1UL << RTC_ISR_TAMP2F_Pos) /*!< 0x00004000 */ +#define RTC_ISR_TAMP2F RTC_ISR_TAMP2F_Msk /*!< RTC_TAMP2 detection flag */ +#define RTC_ISR_TSOVF_Pos (12U) +#define RTC_ISR_TSOVF_Msk (0x1UL << RTC_ISR_TSOVF_Pos) /*!< 0x00001000 */ +#define RTC_ISR_TSOVF RTC_ISR_TSOVF_Msk /*!< Timestamp overflow flag */ +#define RTC_ISR_TSF_Pos (11U) +#define RTC_ISR_TSF_Msk (0x1UL << RTC_ISR_TSF_Pos) /*!< 0x00000800 */ +#define RTC_ISR_TSF RTC_ISR_TSF_Msk /*!< Timestamp flag */ +#define RTC_ISR_WUTF_Pos (10U) +#define RTC_ISR_WUTF_Msk (0x1UL << RTC_ISR_WUTF_Pos) /*!< 0x00000400 */ +#define RTC_ISR_WUTF RTC_ISR_WUTF_Msk /*!< Wakeup timer flag */ +#define RTC_ISR_ALRBF_Pos (9U) +#define RTC_ISR_ALRBF_Msk (0x1UL << RTC_ISR_ALRBF_Pos) /*!< 0x00000200 */ +#define RTC_ISR_ALRBF RTC_ISR_ALRBF_Msk /*!< Alarm B flag */ +#define RTC_ISR_ALRAF_Pos (8U) +#define RTC_ISR_ALRAF_Msk (0x1UL << RTC_ISR_ALRAF_Pos) /*!< 0x00000100 */ +#define RTC_ISR_ALRAF RTC_ISR_ALRAF_Msk /*!< Alarm A flag */ +#define RTC_ISR_INIT_Pos (7U) +#define RTC_ISR_INIT_Msk (0x1UL << RTC_ISR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ISR_INIT RTC_ISR_INIT_Msk /*!< Initialization mode */ +#define RTC_ISR_INITF_Pos (6U) +#define RTC_ISR_INITF_Msk (0x1UL << RTC_ISR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ISR_INITF RTC_ISR_INITF_Msk /*!< Initialization flag */ +#define RTC_ISR_RSF_Pos (5U) +#define RTC_ISR_RSF_Msk (0x1UL << RTC_ISR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ISR_RSF RTC_ISR_RSF_Msk /*!< Registers synchronization flag */ +#define RTC_ISR_INITS_Pos (4U) +#define RTC_ISR_INITS_Msk (0x1UL << RTC_ISR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ISR_INITS RTC_ISR_INITS_Msk /*!< Initialization status flag */ +#define RTC_ISR_SHPF_Pos (3U) +#define RTC_ISR_SHPF_Msk (0x1UL << RTC_ISR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ISR_SHPF RTC_ISR_SHPF_Msk /*!< Shift operation pending */ +#define RTC_ISR_WUTWF_Pos (2U) +#define RTC_ISR_WUTWF_Msk (0x1UL << RTC_ISR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ISR_WUTWF RTC_ISR_WUTWF_Msk /*!< Wakeup timer write flag */ +#define RTC_ISR_ALRBWF_Pos (1U) +#define RTC_ISR_ALRBWF_Msk (0x1UL << RTC_ISR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ISR_ALRBWF RTC_ISR_ALRBWF_Msk /*!< Alarm B write flag */ +#define RTC_ISR_ALRAWF_Pos (0U) +#define RTC_ISR_ALRAWF_Msk (0x1UL << RTC_ISR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ISR_ALRAWF RTC_ISR_ALRAWF_Msk /*!< Alarm A write flag */ + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk /*!< Asynchronous prescaler factor */ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk /*!< Synchronous prescaler factor */ + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk /*!< Alarm A date mask */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk /*!< Alarm A week day selection */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk /*!< Alarm A date tens in BCD format */ +#define RTC_ALRMAR_DT_0 (0x1U << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2U << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk /*!< Alarm A date units in BCD format */ +#define RTC_ALRMAR_DU_0 (0x1U << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2U << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4U << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8U << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk /*!< Alarm A hours mask */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk /*!< Alarm A AM/PM or 24H format */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk /*!< Alarm A hour tens in BCD format */ +#define RTC_ALRMAR_HT_0 (0x1U << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2U << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk /*!< Alarm A hour units in BCD format */ +#define RTC_ALRMAR_HU_0 (0x1U << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2U << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4U << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8U << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk /*!< Alarm A minutes mask */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk /*!< Alarm A minute tens in BCD format */ +#define RTC_ALRMAR_MNT_0 (0x1U << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2U << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4U << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk /*!< Alarm A minute units in BCD format */ +#define RTC_ALRMAR_MNU_0 (0x1U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk /*!< Alarm A seconds mask */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk /*!< Alarm A second tens in BCD format */ +#define RTC_ALRMAR_ST_0 (0x1U << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2U << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4U << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk /*!< Alarm A second units in BCD format */ +#define RTC_ALRMAR_SU_0 (0x1U << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2U << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4U << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8U << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk /*!< Alarm B date mask */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk /*!< Alarm B week day selection */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk /*!< Alarm B data tens in BCD format */ +#define RTC_ALRMBR_DT_0 (0x1U << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2U << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk /*!< Alarm B data units or day in BCD format */ +#define RTC_ALRMBR_DU_0 (0x1U << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2U << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4U << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8U << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk /*!< Alarm B hour mask */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk /*!< Alarm B AM/PM or 24H format */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk /*!< Alarm B hour tens in BCD format */ +#define RTC_ALRMBR_HT_0 (0x1U << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2U << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk /*!< Alarm B hour units in BCD format */ +#define RTC_ALRMBR_HU_0 (0x1U << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2U << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4U << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8U << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk /*!< Alarm B minutes mask */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk /*!< Alarm B minute tens in BCD format */ +#define RTC_ALRMBR_MNT_0 (0x1U << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2U << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4U << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk /*!< Alarm B minute units in BCD format */ +#define RTC_ALRMBR_MNU_0 (0x1U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk /*!< Alarm B seconds mask */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk /*!< Alarm B second tens in BCD format */ +#define RTC_ALRMBR_ST_0 (0x1U << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2U << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4U << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk /*!< Alarm B second units in BCD format */ +#define RTC_ALRMBR_SU_0 (0x1U << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2U << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4U << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8U << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk /*!< Write protection key */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFUL << RTC_SSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk /*!< Sub second value */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk /*!< Substract a fraction of a second */ +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk /*!< Add on second */ + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< Timestamp AM/PM or 24H format */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk /*!< Timestamp hour tens in BCD format */ +#define RTC_TSTR_HT_0 (0x1U << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2U << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk /*!< Timestamp hour units in BCD format */ +#define RTC_TSTR_HU_0 (0x1U << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2U << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4U << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8U << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk /*!< Timestamp minute tens in BCD format */ +#define RTC_TSTR_MNT_0 (0x1U << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2U << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4U << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk /*!< Timestamp minute units in BCD format */ +#define RTC_TSTR_MNU_0 (0x1U << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2U << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4U << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8U << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk /*!< Timestamp second tens in BCD format */ +#define RTC_TSTR_ST_0 (0x1U << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2U << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4U << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk /*!< Timestamp second units in BCD format */ +#define RTC_TSTR_SU_0 (0x1U << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2U << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4U << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8U << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Timestamp week day units */ +#define RTC_TSDR_WDU_0 (0x1U << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2U << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4U << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk /*!< Timestamp month tens in BCD format */ +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk /*!< Timestamp month units in BCD format */ +#define RTC_TSDR_MU_0 (0x1U << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2U << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4U << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8U << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk /*!< Timestamp date tens in BCD format */ +#define RTC_TSDR_DT_0 (0x1U << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2U << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk /*!< Timestamp date units in BCD format */ +#define RTC_TSDR_DU_0 (0x1U << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2U << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4U << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8U << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Timestamp sub second value */ + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk /*!< Increase frequency of RTC 488.5 ppm */ +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk /*!< Use a 8-second calibration cycle period */ +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk /*!< Use a 16-second calibration cycle period */ +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk /*!< Calibration minus */ +#define RTC_CALR_CALM_0 (0x001U << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002U << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004U << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008U << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010U << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020U << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040U << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080U << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100U << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_TAMPCR register ****************/ +#define RTC_TAMPCR_TAMP2MF_Pos (21U) +#define RTC_TAMPCR_TAMP2MF_Msk (0x1UL << RTC_TAMPCR_TAMP2MF_Pos) /*!< 0x00200000 */ +#define RTC_TAMPCR_TAMP2MF RTC_TAMPCR_TAMP2MF_Msk /*!< Tamper 2 generates a trigger event */ +#define RTC_TAMPCR_TAMP2NOERASE_Pos (20U) +#define RTC_TAMPCR_TAMP2NOERASE_Msk (0x1UL << RTC_TAMPCR_TAMP2NOERASE_Pos) /*!< 0x00100000 */ +#define RTC_TAMPCR_TAMP2NOERASE RTC_TAMPCR_TAMP2NOERASE_Msk /*!< Tamper 2 no erase backup registers */ +#define RTC_TAMPCR_TAMP2IE_Pos (19U) +#define RTC_TAMPCR_TAMP2IE_Msk (0x1UL << RTC_TAMPCR_TAMP2IE_Pos) /*!< 0x00080000 */ +#define RTC_TAMPCR_TAMP2IE RTC_TAMPCR_TAMP2IE_Msk /*!< Tamper 2 interrupt enable */ +#define RTC_TAMPCR_TAMPPUDIS_Pos (15U) +#define RTC_TAMPCR_TAMPPUDIS_Msk (0x1UL << RTC_TAMPCR_TAMPPUDIS_Pos) /*!< 0x00008000 */ +#define RTC_TAMPCR_TAMPPUDIS RTC_TAMPCR_TAMPPUDIS_Msk /*!< RTC_TAMPx pull-up disable */ +#define RTC_TAMPCR_TAMPPRCH_Pos (13U) +#define RTC_TAMPCR_TAMPPRCH_Msk (0x3UL << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00006000 */ +#define RTC_TAMPCR_TAMPPRCH RTC_TAMPCR_TAMPPRCH_Msk /*!< RTC_TAMPx precharge duration */ +#define RTC_TAMPCR_TAMPPRCH_0 (0x1U << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00002000 */ +#define RTC_TAMPCR_TAMPPRCH_1 (0x2U << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00004000 */ +#define RTC_TAMPCR_TAMPFLT_Pos (11U) +#define RTC_TAMPCR_TAMPFLT_Msk (0x3UL << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001800 */ +#define RTC_TAMPCR_TAMPFLT RTC_TAMPCR_TAMPFLT_Msk /*!< RTC_TAMPx filter count */ +#define RTC_TAMPCR_TAMPFLT_0 (0x1U << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00000800 */ +#define RTC_TAMPCR_TAMPFLT_1 (0x2U << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001000 */ +#define RTC_TAMPCR_TAMPFREQ_Pos (8U) +#define RTC_TAMPCR_TAMPFREQ_Msk (0x7UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000700 */ +#define RTC_TAMPCR_TAMPFREQ RTC_TAMPCR_TAMPFREQ_Msk /*!< Tamper sampling frequency */ +#define RTC_TAMPCR_TAMPFREQ_0 (0x1U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000100 */ +#define RTC_TAMPCR_TAMPFREQ_1 (0x2U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000200 */ +#define RTC_TAMPCR_TAMPFREQ_2 (0x4U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000400 */ +#define RTC_TAMPCR_TAMPTS_Pos (7U) +#define RTC_TAMPCR_TAMPTS_Msk (0x1UL << RTC_TAMPCR_TAMPTS_Pos) /*!< 0x00000080 */ +#define RTC_TAMPCR_TAMPTS RTC_TAMPCR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_TAMPCR_TAMP2TRG_Pos (4U) +#define RTC_TAMPCR_TAMP2TRG_Msk (0x1UL << RTC_TAMPCR_TAMP2TRG_Pos) /*!< 0x00000010 */ +#define RTC_TAMPCR_TAMP2TRG RTC_TAMPCR_TAMP2TRG_Msk /*!< Active level for RTC_TAMP2 input */ +#define RTC_TAMPCR_TAMP2E_Pos (3U) +#define RTC_TAMPCR_TAMP2E_Msk (0x1UL << RTC_TAMPCR_TAMP2E_Pos) /*!< 0x00000008 */ +#define RTC_TAMPCR_TAMP2E RTC_TAMPCR_TAMP2E_Msk /*!< RTC_TAMP2 detection enable */ +#define RTC_TAMPCR_TAMPIE_Pos (2U) +#define RTC_TAMPCR_TAMPIE_Msk (0x1UL << RTC_TAMPCR_TAMPIE_Pos) /*!< 0x00000004 */ +#define RTC_TAMPCR_TAMPIE RTC_TAMPCR_TAMPIE_Msk /*!< Tampers interrupt enable */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk /*!< Alarm A mask the most-significant bits starting at this bit */ +#define RTC_ALRMASSR_MASKSS_0 (0x1U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) /*!< Alarm A sub seconds value*/ +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk /*!< Alarm B mask the most-significant bits starting at this bit */ +#define RTC_ALRMBSSR_MASKSS_0 (0x1U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) /*!< Alarm B sub seconds value*/ +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_OR register ****************/ +#define RTC_OR_OUT_RMP_Pos (1U) +#define RTC_OR_OUT_RMP_Msk (0x1UL << RTC_OR_OUT_RMP_Pos) /*!< 0x00000002 */ +#define RTC_OR_OUT_RMP RTC_OR_OUT_RMP_Msk /*!< RTC_OUT remap */ + +/******************** Bits definition for RTC_BKP0R register ****************/ +#define RTC_BKP0R_Pos (0U) +#define RTC_BKP0R_Msk (0xFFFFFFFFUL << RTC_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP0R RTC_BKP0R_Msk /*!< RTC backup register 0 */ + +/******************** Bits definition for RTC_BKP1R register ****************/ +#define RTC_BKP1R_Pos (0U) +#define RTC_BKP1R_Msk (0xFFFFFFFFUL << RTC_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP1R RTC_BKP1R_Msk /*!< RTC backup register 1 */ + +/******************** Bits definition for RTC_BKP2R register ****************/ +#define RTC_BKP2R_Pos (0U) +#define RTC_BKP2R_Msk (0xFFFFFFFFUL << RTC_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP2R RTC_BKP2R_Msk /*!< RTC backup register 2 */ + +/******************** Bits definition for RTC_BKP3R register ****************/ +#define RTC_BKP3R_Pos (0U) +#define RTC_BKP3R_Msk (0xFFFFFFFFUL << RTC_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP3R RTC_BKP3R_Msk /*!< RTC backup register 3 */ + +/******************** Bits definition for RTC_BKP4R register ****************/ +#define RTC_BKP4R_Pos (0U) +#define RTC_BKP4R_Msk (0xFFFFFFFFUL << RTC_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP4R RTC_BKP4R_Msk /*!< RTC backup register 4 */ + +/******************** Bits definition for RTC_BKP5R register ****************/ +#define RTC_BKP5R_Pos (0U) +#define RTC_BKP5R_Msk (0xFFFFFFFFUL << RTC_BKP5R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP5R RTC_BKP5R_Msk /*!< RTC backup register 5 */ + +/******************** Bits definition for RTC_BKP6R register ****************/ +#define RTC_BKP6R_Pos (0U) +#define RTC_BKP6R_Msk (0xFFFFFFFFUL << RTC_BKP6R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP6R RTC_BKP6R_Msk /*!< RTC backup register 6 */ + +/******************** Bits definition for RTC_BKP7R register ****************/ +#define RTC_BKP7R_Pos (0U) +#define RTC_BKP7R_Msk (0xFFFFFFFFUL << RTC_BKP7R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP7R RTC_BKP7R_Msk /*!< RTC backup register 7 */ + +/******************** Bits definition for RTC_BKP8R register ****************/ +#define RTC_BKP8R_Pos (0U) +#define RTC_BKP8R_Msk (0xFFFFFFFFUL << RTC_BKP8R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP8R RTC_BKP8R_Msk /*!< RTC backup register 8 */ + +/******************** Bits definition for RTC_BKP9R register ****************/ +#define RTC_BKP9R_Pos (0U) +#define RTC_BKP9R_Msk (0xFFFFFFFFUL << RTC_BKP9R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP9R RTC_BKP9R_Msk /*!< RTC backup register 9 */ + +/******************** Bits definition for RTC_BKP10R register ***************/ +#define RTC_BKP10R_Pos (0U) +#define RTC_BKP10R_Msk (0xFFFFFFFFUL << RTC_BKP10R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP10R RTC_BKP10R_Msk /*!< RTC backup register 10 */ + +/******************** Bits definition for RTC_BKP11R register ***************/ +#define RTC_BKP11R_Pos (0U) +#define RTC_BKP11R_Msk (0xFFFFFFFFUL << RTC_BKP11R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP11R RTC_BKP11R_Msk /*!< RTC backup register 11 */ + +/******************** Bits definition for RTC_BKP12R register ***************/ +#define RTC_BKP12R_Pos (0U) +#define RTC_BKP12R_Msk (0xFFFFFFFFUL << RTC_BKP12R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP12R RTC_BKP12R_Msk /*!< RTC backup register 12 */ + +/******************** Bits definition for RTC_BKP13R register ***************/ +#define RTC_BKP13R_Pos (0U) +#define RTC_BKP13R_Msk (0xFFFFFFFFUL << RTC_BKP13R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP13R RTC_BKP13R_Msk /*!< RTC backup register 13 */ + +/******************** Bits definition for RTC_BKP14R register ***************/ +#define RTC_BKP14R_Pos (0U) +#define RTC_BKP14R_Msk (0xFFFFFFFFUL << RTC_BKP14R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP14R RTC_BKP14R_Msk /*!< RTC backup register 14 */ + +/******************** Bits definition for RTC_BKP15R register ***************/ +#define RTC_BKP15R_Pos (0U) +#define RTC_BKP15R_Msk (0xFFFFFFFFUL << RTC_BKP15R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP15R RTC_BKP15R_Msk /*!< RTC backup register 15 */ + +/******************** Bits definition for RTC_BKP16R register ***************/ +#define RTC_BKP16R_Pos (0U) +#define RTC_BKP16R_Msk (0xFFFFFFFFUL << RTC_BKP16R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP16R RTC_BKP16R_Msk /*!< RTC backup register 16 */ + +/******************** Bits definition for RTC_BKP17R register ***************/ +#define RTC_BKP17R_Pos (0U) +#define RTC_BKP17R_Msk (0xFFFFFFFFUL << RTC_BKP17R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP17R RTC_BKP17R_Msk /*!< RTC backup register 17 */ + +/******************** Bits definition for RTC_BKP18R register ***************/ +#define RTC_BKP18R_Pos (0U) +#define RTC_BKP18R_Msk (0xFFFFFFFFUL << RTC_BKP18R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP18R RTC_BKP18R_Msk /*!< RTC backup register 18 */ + +/******************** Bits definition for RTC_BKP19R register ***************/ +#define RTC_BKP19R_Pos (0U) +#define RTC_BKP19R_Msk (0xFFFFFFFFUL << RTC_BKP19R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP19R RTC_BKP19R_Msk /*!< RTC backup register 19 */ + +/******************** Number of backup registers ******************************/ +#define RTC_BKP_NUMBER (20U) + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*!<Clock Phase */ +#define SPI_CR1_CPOL_Pos (1U) +#define SPI_CR1_CPOL_Msk (0x1UL << SPI_CR1_CPOL_Pos) /*!< 0x00000002 */ +#define SPI_CR1_CPOL SPI_CR1_CPOL_Msk /*!<Clock Polarity */ +#define SPI_CR1_MSTR_Pos (2U) +#define SPI_CR1_MSTR_Msk (0x1UL << SPI_CR1_MSTR_Pos) /*!< 0x00000004 */ +#define SPI_CR1_MSTR SPI_CR1_MSTR_Msk /*!<Master Selection */ + +#define SPI_CR1_BR_Pos (3U) +#define SPI_CR1_BR_Msk (0x7UL << SPI_CR1_BR_Pos) /*!< 0x00000038 */ +#define SPI_CR1_BR SPI_CR1_BR_Msk /*!<BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 (0x1UL << SPI_CR1_BR_Pos) /*!< 0x00000008 */ +#define SPI_CR1_BR_1 (0x2UL << SPI_CR1_BR_Pos) /*!< 0x00000010 */ +#define SPI_CR1_BR_2 (0x4UL << SPI_CR1_BR_Pos) /*!< 0x00000020 */ + +#define SPI_CR1_SPE_Pos (6U) +#define SPI_CR1_SPE_Msk (0x1UL << SPI_CR1_SPE_Pos) /*!< 0x00000040 */ +#define SPI_CR1_SPE SPI_CR1_SPE_Msk /*!<SPI Enable */ +#define SPI_CR1_LSBFIRST_Pos (7U) +#define SPI_CR1_LSBFIRST_Msk (0x1UL << SPI_CR1_LSBFIRST_Pos) /*!< 0x00000080 */ +#define SPI_CR1_LSBFIRST SPI_CR1_LSBFIRST_Msk /*!<Frame Format */ +#define SPI_CR1_SSI_Pos (8U) +#define SPI_CR1_SSI_Msk (0x1UL << SPI_CR1_SSI_Pos) /*!< 0x00000100 */ +#define SPI_CR1_SSI SPI_CR1_SSI_Msk /*!<Internal slave select */ +#define SPI_CR1_SSM_Pos (9U) +#define SPI_CR1_SSM_Msk (0x1UL << SPI_CR1_SSM_Pos) /*!< 0x00000200 */ +#define SPI_CR1_SSM SPI_CR1_SSM_Msk /*!<Software slave management */ +#define SPI_CR1_RXONLY_Pos (10U) +#define SPI_CR1_RXONLY_Msk (0x1UL << SPI_CR1_RXONLY_Pos) /*!< 0x00000400 */ +#define SPI_CR1_RXONLY SPI_CR1_RXONLY_Msk /*!<Receive only */ +#define SPI_CR1_CRCL_Pos (11U) +#define SPI_CR1_CRCL_Msk (0x1UL << SPI_CR1_CRCL_Pos) /*!< 0x00000800 */ +#define SPI_CR1_CRCL SPI_CR1_CRCL_Msk /*!< CRC Length */ +#define SPI_CR1_CRCNEXT_Pos (12U) +#define SPI_CR1_CRCNEXT_Msk (0x1UL << SPI_CR1_CRCNEXT_Pos) /*!< 0x00001000 */ +#define SPI_CR1_CRCNEXT SPI_CR1_CRCNEXT_Msk /*!<Transmit CRC next */ +#define SPI_CR1_CRCEN_Pos (13U) +#define SPI_CR1_CRCEN_Msk (0x1UL << SPI_CR1_CRCEN_Pos) /*!< 0x00002000 */ +#define SPI_CR1_CRCEN SPI_CR1_CRCEN_Msk /*!<Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE_Pos (14U) +#define SPI_CR1_BIDIOE_Msk (0x1UL << SPI_CR1_BIDIOE_Pos) /*!< 0x00004000 */ +#define SPI_CR1_BIDIOE SPI_CR1_BIDIOE_Msk /*!<Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE_Pos (15U) +#define SPI_CR1_BIDIMODE_Msk (0x1UL << SPI_CR1_BIDIMODE_Pos) /*!< 0x00008000 */ +#define SPI_CR1_BIDIMODE SPI_CR1_BIDIMODE_Msk /*!<Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN_Pos (0U) +#define SPI_CR2_RXDMAEN_Msk (0x1UL << SPI_CR2_RXDMAEN_Pos) /*!< 0x00000001 */ +#define SPI_CR2_RXDMAEN SPI_CR2_RXDMAEN_Msk /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN_Pos (1U) +#define SPI_CR2_TXDMAEN_Msk (0x1UL << SPI_CR2_TXDMAEN_Pos) /*!< 0x00000002 */ +#define SPI_CR2_TXDMAEN SPI_CR2_TXDMAEN_Msk /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE_Pos (2U) +#define SPI_CR2_SSOE_Msk (0x1UL << SPI_CR2_SSOE_Pos) /*!< 0x00000004 */ +#define SPI_CR2_SSOE SPI_CR2_SSOE_Msk /*!< SS Output Enable */ +#define SPI_CR2_NSSP_Pos (3U) +#define SPI_CR2_NSSP_Msk (0x1UL << SPI_CR2_NSSP_Pos) /*!< 0x00000008 */ +#define SPI_CR2_NSSP SPI_CR2_NSSP_Msk /*!< NSS pulse management Enable */ +#define SPI_CR2_FRF_Pos (4U) +#define SPI_CR2_FRF_Msk (0x1UL << SPI_CR2_FRF_Pos) /*!< 0x00000010 */ +#define SPI_CR2_FRF SPI_CR2_FRF_Msk /*!< Frame Format Enable */ +#define SPI_CR2_ERRIE_Pos (5U) +#define SPI_CR2_ERRIE_Msk (0x1UL << SPI_CR2_ERRIE_Pos) /*!< 0x00000020 */ +#define SPI_CR2_ERRIE SPI_CR2_ERRIE_Msk /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE_Pos (6U) +#define SPI_CR2_RXNEIE_Msk (0x1UL << SPI_CR2_RXNEIE_Pos) /*!< 0x00000040 */ +#define SPI_CR2_RXNEIE SPI_CR2_RXNEIE_Msk /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE_Pos (7U) +#define SPI_CR2_TXEIE_Msk (0x1UL << SPI_CR2_TXEIE_Pos) /*!< 0x00000080 */ +#define SPI_CR2_TXEIE SPI_CR2_TXEIE_Msk /*!< Tx buffer Empty Interrupt Enable */ +#define SPI_CR2_DS_Pos (8U) +#define SPI_CR2_DS_Msk (0xFUL << SPI_CR2_DS_Pos) /*!< 0x00000F00 */ +#define SPI_CR2_DS SPI_CR2_DS_Msk /*!< DS[3:0] Data Size */ +#define SPI_CR2_DS_0 (0x1UL << SPI_CR2_DS_Pos) /*!< 0x00000100 */ +#define SPI_CR2_DS_1 (0x2UL << SPI_CR2_DS_Pos) /*!< 0x00000200 */ +#define SPI_CR2_DS_2 (0x4UL << SPI_CR2_DS_Pos) /*!< 0x00000400 */ +#define SPI_CR2_DS_3 (0x8UL << SPI_CR2_DS_Pos) /*!< 0x00000800 */ +#define SPI_CR2_FRXTH_Pos (12U) +#define SPI_CR2_FRXTH_Msk (0x1UL << SPI_CR2_FRXTH_Pos) /*!< 0x00001000 */ +#define SPI_CR2_FRXTH SPI_CR2_FRXTH_Msk /*!< FIFO reception Threshold */ +#define SPI_CR2_LDMARX_Pos (13U) +#define SPI_CR2_LDMARX_Msk (0x1UL << SPI_CR2_LDMARX_Pos) /*!< 0x00002000 */ +#define SPI_CR2_LDMARX SPI_CR2_LDMARX_Msk /*!< Last DMA transfer for reception */ +#define SPI_CR2_LDMATX_Pos (14U) +#define SPI_CR2_LDMATX_Msk (0x1UL << SPI_CR2_LDMATX_Pos) /*!< 0x00004000 */ +#define SPI_CR2_LDMATX SPI_CR2_LDMATX_Msk /*!< Last DMA transfer for transmission */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE_Pos (0U) +#define SPI_SR_RXNE_Msk (0x1UL << SPI_SR_RXNE_Pos) /*!< 0x00000001 */ +#define SPI_SR_RXNE SPI_SR_RXNE_Msk /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE_Pos (1U) +#define SPI_SR_TXE_Msk (0x1UL << SPI_SR_TXE_Pos) /*!< 0x00000002 */ +#define SPI_SR_TXE SPI_SR_TXE_Msk /*!< Transmit buffer Empty */ +#define SPI_SR_CRCERR_Pos (4U) +#define SPI_SR_CRCERR_Msk (0x1UL << SPI_SR_CRCERR_Pos) /*!< 0x00000010 */ +#define SPI_SR_CRCERR SPI_SR_CRCERR_Msk /*!< CRC Error flag */ +#define SPI_SR_MODF_Pos (5U) +#define SPI_SR_MODF_Msk (0x1UL << SPI_SR_MODF_Pos) /*!< 0x00000020 */ +#define SPI_SR_MODF SPI_SR_MODF_Msk /*!< Mode fault */ +#define SPI_SR_OVR_Pos (6U) +#define SPI_SR_OVR_Msk (0x1UL << SPI_SR_OVR_Pos) /*!< 0x00000040 */ +#define SPI_SR_OVR SPI_SR_OVR_Msk /*!< Overrun flag */ +#define SPI_SR_BSY_Pos (7U) +#define SPI_SR_BSY_Msk (0x1UL << SPI_SR_BSY_Pos) /*!< 0x00000080 */ +#define SPI_SR_BSY SPI_SR_BSY_Msk /*!< Busy flag */ +#define SPI_SR_FRE_Pos (8U) +#define SPI_SR_FRE_Msk (0x1UL << SPI_SR_FRE_Pos) /*!< 0x00000100 */ +#define SPI_SR_FRE SPI_SR_FRE_Msk /*!< TI frame format error */ +#define SPI_SR_FRLVL_Pos (9U) +#define SPI_SR_FRLVL_Msk (0x3UL << SPI_SR_FRLVL_Pos) /*!< 0x00000600 */ +#define SPI_SR_FRLVL SPI_SR_FRLVL_Msk /*!< FIFO Reception Level */ +#define SPI_SR_FRLVL_0 (0x1UL << SPI_SR_FRLVL_Pos) /*!< 0x00000200 */ +#define SPI_SR_FRLVL_1 (0x2UL << SPI_SR_FRLVL_Pos) /*!< 0x00000400 */ +#define SPI_SR_FTLVL_Pos (11U) +#define SPI_SR_FTLVL_Msk (0x3UL << SPI_SR_FTLVL_Pos) /*!< 0x00001800 */ +#define SPI_SR_FTLVL SPI_SR_FTLVL_Msk /*!< FIFO Transmission Level */ +#define SPI_SR_FTLVL_0 (0x1UL << SPI_SR_FTLVL_Pos) /*!< 0x00000800 */ +#define SPI_SR_FTLVL_1 (0x2UL << SPI_SR_FTLVL_Pos) /*!< 0x00001000 */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR_Pos (0U) +#define SPI_DR_DR_Msk (0xFFFFUL << SPI_DR_DR_Pos) /*!< 0x0000FFFF */ +#define SPI_DR_DR SPI_DR_DR_Msk /*!<Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY_Pos (0U) +#define SPI_CRCPR_CRCPOLY_Msk (0xFFFFUL << SPI_CRCPR_CRCPOLY_Pos) /*!< 0x0000FFFF */ +#define SPI_CRCPR_CRCPOLY SPI_CRCPR_CRCPOLY_Msk /*!<CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC_Pos (0U) +#define SPI_RXCRCR_RXCRC_Msk (0xFFFFUL << SPI_RXCRCR_RXCRC_Pos) /*!< 0x0000FFFF */ +#define SPI_RXCRCR_RXCRC SPI_RXCRCR_RXCRC_Msk /*!<Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC_Pos (0U) +#define SPI_TXCRCR_TXCRC_Msk (0xFFFFUL << SPI_TXCRCR_TXCRC_Pos) /*!< 0x0000FFFF */ +#define SPI_TXCRCR_TXCRC SPI_TXCRCR_TXCRC_Msk /*!<Tx CRC Register */ + +/******************************************************************************/ +/* */ +/* Touch Sensing Controller (TSC) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TSC_CR register *********************/ +#define TSC_CR_TSCE_Pos (0U) +#define TSC_CR_TSCE_Msk (0x1UL << TSC_CR_TSCE_Pos) /*!< 0x00000001 */ +#define TSC_CR_TSCE TSC_CR_TSCE_Msk /*!< Touch sensing controller enable */ +#define TSC_CR_START_Pos (1U) +#define TSC_CR_START_Msk (0x1UL << TSC_CR_START_Pos) /*!< 0x00000002 */ +#define TSC_CR_START TSC_CR_START_Msk /*!< Start a new acquisition */ +#define TSC_CR_AM_Pos (2U) +#define TSC_CR_AM_Msk (0x1UL << TSC_CR_AM_Pos) /*!< 0x00000004 */ +#define TSC_CR_AM TSC_CR_AM_Msk /*!< Acquisition mode */ +#define TSC_CR_SYNCPOL_Pos (3U) +#define TSC_CR_SYNCPOL_Msk (0x1UL << TSC_CR_SYNCPOL_Pos) /*!< 0x00000008 */ +#define TSC_CR_SYNCPOL TSC_CR_SYNCPOL_Msk /*!< Synchronization pin polarity */ +#define TSC_CR_IODEF_Pos (4U) +#define TSC_CR_IODEF_Msk (0x1UL << TSC_CR_IODEF_Pos) /*!< 0x00000010 */ +#define TSC_CR_IODEF TSC_CR_IODEF_Msk /*!< IO default mode */ + +#define TSC_CR_MCV_Pos (5U) +#define TSC_CR_MCV_Msk (0x7UL << TSC_CR_MCV_Pos) /*!< 0x000000E0 */ +#define TSC_CR_MCV TSC_CR_MCV_Msk /*!< MCV[2:0] bits (Max Count Value) */ +#define TSC_CR_MCV_0 (0x1U << TSC_CR_MCV_Pos) /*!< 0x00000020 */ +#define TSC_CR_MCV_1 (0x2U << TSC_CR_MCV_Pos) /*!< 0x00000040 */ +#define TSC_CR_MCV_2 (0x4U << TSC_CR_MCV_Pos) /*!< 0x00000080 */ + +#define TSC_CR_PGPSC_Pos (12U) +#define TSC_CR_PGPSC_Msk (0x7UL << TSC_CR_PGPSC_Pos) /*!< 0x00007000 */ +#define TSC_CR_PGPSC TSC_CR_PGPSC_Msk /*!< PGPSC[2:0] bits (Pulse Generator Prescaler) */ +#define TSC_CR_PGPSC_0 (0x1U << TSC_CR_PGPSC_Pos) /*!< 0x00001000 */ +#define TSC_CR_PGPSC_1 (0x2U << TSC_CR_PGPSC_Pos) /*!< 0x00002000 */ +#define TSC_CR_PGPSC_2 (0x4U << TSC_CR_PGPSC_Pos) /*!< 0x00004000 */ + +#define TSC_CR_SSPSC_Pos (15U) +#define TSC_CR_SSPSC_Msk (0x1UL << TSC_CR_SSPSC_Pos) /*!< 0x00008000 */ +#define TSC_CR_SSPSC TSC_CR_SSPSC_Msk /*!< Spread Spectrum Prescaler */ +#define TSC_CR_SSE_Pos (16U) +#define TSC_CR_SSE_Msk (0x1UL << TSC_CR_SSE_Pos) /*!< 0x00010000 */ +#define TSC_CR_SSE TSC_CR_SSE_Msk /*!< Spread Spectrum Enable */ + +#define TSC_CR_SSD_Pos (17U) +#define TSC_CR_SSD_Msk (0x7FUL << TSC_CR_SSD_Pos) /*!< 0x00FE0000 */ +#define TSC_CR_SSD TSC_CR_SSD_Msk /*!< SSD[6:0] bits (Spread Spectrum Deviation) */ +#define TSC_CR_SSD_0 (0x01U << TSC_CR_SSD_Pos) /*!< 0x00020000 */ +#define TSC_CR_SSD_1 (0x02U << TSC_CR_SSD_Pos) /*!< 0x00040000 */ +#define TSC_CR_SSD_2 (0x04U << TSC_CR_SSD_Pos) /*!< 0x00080000 */ +#define TSC_CR_SSD_3 (0x08U << TSC_CR_SSD_Pos) /*!< 0x00100000 */ +#define TSC_CR_SSD_4 (0x10U << TSC_CR_SSD_Pos) /*!< 0x00200000 */ +#define TSC_CR_SSD_5 (0x20U << TSC_CR_SSD_Pos) /*!< 0x00400000 */ +#define TSC_CR_SSD_6 (0x40U << TSC_CR_SSD_Pos) /*!< 0x00800000 */ + +#define TSC_CR_CTPL_Pos (24U) +#define TSC_CR_CTPL_Msk (0xFUL << TSC_CR_CTPL_Pos) /*!< 0x0F000000 */ +#define TSC_CR_CTPL TSC_CR_CTPL_Msk /*!< CTPL[3:0] bits (Charge Transfer pulse low) */ +#define TSC_CR_CTPL_0 (0x1U << TSC_CR_CTPL_Pos) /*!< 0x01000000 */ +#define TSC_CR_CTPL_1 (0x2U << TSC_CR_CTPL_Pos) /*!< 0x02000000 */ +#define TSC_CR_CTPL_2 (0x4U << TSC_CR_CTPL_Pos) /*!< 0x04000000 */ +#define TSC_CR_CTPL_3 (0x8U << TSC_CR_CTPL_Pos) /*!< 0x08000000 */ + +#define TSC_CR_CTPH_Pos (28U) +#define TSC_CR_CTPH_Msk (0xFUL << TSC_CR_CTPH_Pos) /*!< 0xF0000000 */ +#define TSC_CR_CTPH TSC_CR_CTPH_Msk /*!< CTPH[3:0] bits (Charge Transfer pulse high) */ +#define TSC_CR_CTPH_0 (0x1U << TSC_CR_CTPH_Pos) /*!< 0x10000000 */ +#define TSC_CR_CTPH_1 (0x2U << TSC_CR_CTPH_Pos) /*!< 0x20000000 */ +#define TSC_CR_CTPH_2 (0x4U << TSC_CR_CTPH_Pos) /*!< 0x40000000 */ +#define TSC_CR_CTPH_3 (0x8U << TSC_CR_CTPH_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for TSC_IER register ********************/ +#define TSC_IER_EOAIE_Pos (0U) +#define TSC_IER_EOAIE_Msk (0x1UL << TSC_IER_EOAIE_Pos) /*!< 0x00000001 */ +#define TSC_IER_EOAIE TSC_IER_EOAIE_Msk /*!< End of acquisition interrupt enable */ +#define TSC_IER_MCEIE_Pos (1U) +#define TSC_IER_MCEIE_Msk (0x1UL << TSC_IER_MCEIE_Pos) /*!< 0x00000002 */ +#define TSC_IER_MCEIE TSC_IER_MCEIE_Msk /*!< Max count error interrupt enable */ + +/******************* Bit definition for TSC_ICR register ********************/ +#define TSC_ICR_EOAIC_Pos (0U) +#define TSC_ICR_EOAIC_Msk (0x1UL << TSC_ICR_EOAIC_Pos) /*!< 0x00000001 */ +#define TSC_ICR_EOAIC TSC_ICR_EOAIC_Msk /*!< End of acquisition interrupt clear */ +#define TSC_ICR_MCEIC_Pos (1U) +#define TSC_ICR_MCEIC_Msk (0x1UL << TSC_ICR_MCEIC_Pos) /*!< 0x00000002 */ +#define TSC_ICR_MCEIC TSC_ICR_MCEIC_Msk /*!< Max count error interrupt clear */ + +/******************* Bit definition for TSC_ISR register ********************/ +#define TSC_ISR_EOAF_Pos (0U) +#define TSC_ISR_EOAF_Msk (0x1UL << TSC_ISR_EOAF_Pos) /*!< 0x00000001 */ +#define TSC_ISR_EOAF TSC_ISR_EOAF_Msk /*!< End of acquisition flag */ +#define TSC_ISR_MCEF_Pos (1U) +#define TSC_ISR_MCEF_Msk (0x1UL << TSC_ISR_MCEF_Pos) /*!< 0x00000002 */ +#define TSC_ISR_MCEF TSC_ISR_MCEF_Msk /*!< Max count error flag */ + +/******************* Bit definition for TSC_IOHCR register ******************/ +#define TSC_IOHCR_G1_IO1_Pos (0U) +#define TSC_IOHCR_G1_IO1_Msk (0x1UL << TSC_IOHCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOHCR_G1_IO1 TSC_IOHCR_G1_IO1_Msk /*!< GROUP1_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO2_Pos (1U) +#define TSC_IOHCR_G1_IO2_Msk (0x1UL << TSC_IOHCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOHCR_G1_IO2 TSC_IOHCR_G1_IO2_Msk /*!< GROUP1_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO3_Pos (2U) +#define TSC_IOHCR_G1_IO3_Msk (0x1UL << TSC_IOHCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOHCR_G1_IO3 TSC_IOHCR_G1_IO3_Msk /*!< GROUP1_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO4_Pos (3U) +#define TSC_IOHCR_G1_IO4_Msk (0x1UL << TSC_IOHCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOHCR_G1_IO4 TSC_IOHCR_G1_IO4_Msk /*!< GROUP1_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO1_Pos (4U) +#define TSC_IOHCR_G2_IO1_Msk (0x1UL << TSC_IOHCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOHCR_G2_IO1 TSC_IOHCR_G2_IO1_Msk /*!< GROUP2_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO2_Pos (5U) +#define TSC_IOHCR_G2_IO2_Msk (0x1UL << TSC_IOHCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOHCR_G2_IO2 TSC_IOHCR_G2_IO2_Msk /*!< GROUP2_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO3_Pos (6U) +#define TSC_IOHCR_G2_IO3_Msk (0x1UL << TSC_IOHCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOHCR_G2_IO3 TSC_IOHCR_G2_IO3_Msk /*!< GROUP2_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO4_Pos (7U) +#define TSC_IOHCR_G2_IO4_Msk (0x1UL << TSC_IOHCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOHCR_G2_IO4 TSC_IOHCR_G2_IO4_Msk /*!< GROUP2_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO1_Pos (8U) +#define TSC_IOHCR_G3_IO1_Msk (0x1UL << TSC_IOHCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOHCR_G3_IO1 TSC_IOHCR_G3_IO1_Msk /*!< GROUP3_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO2_Pos (9U) +#define TSC_IOHCR_G3_IO2_Msk (0x1UL << TSC_IOHCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOHCR_G3_IO2 TSC_IOHCR_G3_IO2_Msk /*!< GROUP3_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO3_Pos (10U) +#define TSC_IOHCR_G3_IO3_Msk (0x1UL << TSC_IOHCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOHCR_G3_IO3 TSC_IOHCR_G3_IO3_Msk /*!< GROUP3_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO4_Pos (11U) +#define TSC_IOHCR_G3_IO4_Msk (0x1UL << TSC_IOHCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOHCR_G3_IO4 TSC_IOHCR_G3_IO4_Msk /*!< GROUP3_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO1_Pos (12U) +#define TSC_IOHCR_G4_IO1_Msk (0x1UL << TSC_IOHCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOHCR_G4_IO1 TSC_IOHCR_G4_IO1_Msk /*!< GROUP4_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO2_Pos (13U) +#define TSC_IOHCR_G4_IO2_Msk (0x1UL << TSC_IOHCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOHCR_G4_IO2 TSC_IOHCR_G4_IO2_Msk /*!< GROUP4_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO3_Pos (14U) +#define TSC_IOHCR_G4_IO3_Msk (0x1UL << TSC_IOHCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOHCR_G4_IO3 TSC_IOHCR_G4_IO3_Msk /*!< GROUP4_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO4_Pos (15U) +#define TSC_IOHCR_G4_IO4_Msk (0x1UL << TSC_IOHCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOHCR_G4_IO4 TSC_IOHCR_G4_IO4_Msk /*!< GROUP4_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO1_Pos (16U) +#define TSC_IOHCR_G5_IO1_Msk (0x1UL << TSC_IOHCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOHCR_G5_IO1 TSC_IOHCR_G5_IO1_Msk /*!< GROUP5_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO2_Pos (17U) +#define TSC_IOHCR_G5_IO2_Msk (0x1UL << TSC_IOHCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOHCR_G5_IO2 TSC_IOHCR_G5_IO2_Msk /*!< GROUP5_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO3_Pos (18U) +#define TSC_IOHCR_G5_IO3_Msk (0x1UL << TSC_IOHCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOHCR_G5_IO3 TSC_IOHCR_G5_IO3_Msk /*!< GROUP5_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO4_Pos (19U) +#define TSC_IOHCR_G5_IO4_Msk (0x1UL << TSC_IOHCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOHCR_G5_IO4 TSC_IOHCR_G5_IO4_Msk /*!< GROUP5_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO1_Pos (20U) +#define TSC_IOHCR_G6_IO1_Msk (0x1UL << TSC_IOHCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOHCR_G6_IO1 TSC_IOHCR_G6_IO1_Msk /*!< GROUP6_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO2_Pos (21U) +#define TSC_IOHCR_G6_IO2_Msk (0x1UL << TSC_IOHCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOHCR_G6_IO2 TSC_IOHCR_G6_IO2_Msk /*!< GROUP6_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO3_Pos (22U) +#define TSC_IOHCR_G6_IO3_Msk (0x1UL << TSC_IOHCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOHCR_G6_IO3 TSC_IOHCR_G6_IO3_Msk /*!< GROUP6_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO4_Pos (23U) +#define TSC_IOHCR_G6_IO4_Msk (0x1UL << TSC_IOHCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOHCR_G6_IO4 TSC_IOHCR_G6_IO4_Msk /*!< GROUP6_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO1_Pos (24U) +#define TSC_IOHCR_G7_IO1_Msk (0x1UL << TSC_IOHCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOHCR_G7_IO1 TSC_IOHCR_G7_IO1_Msk /*!< GROUP7_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO2_Pos (25U) +#define TSC_IOHCR_G7_IO2_Msk (0x1UL << TSC_IOHCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOHCR_G7_IO2 TSC_IOHCR_G7_IO2_Msk /*!< GROUP7_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO3_Pos (26U) +#define TSC_IOHCR_G7_IO3_Msk (0x1UL << TSC_IOHCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOHCR_G7_IO3 TSC_IOHCR_G7_IO3_Msk /*!< GROUP7_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO4_Pos (27U) +#define TSC_IOHCR_G7_IO4_Msk (0x1UL << TSC_IOHCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOHCR_G7_IO4 TSC_IOHCR_G7_IO4_Msk /*!< GROUP7_IO4 schmitt trigger hysteresis mode */ + +/******************* Bit definition for TSC_IOASCR register *****************/ +#define TSC_IOASCR_G1_IO1_Pos (0U) +#define TSC_IOASCR_G1_IO1_Msk (0x1UL << TSC_IOASCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOASCR_G1_IO1 TSC_IOASCR_G1_IO1_Msk /*!< GROUP1_IO1 analog switch enable */ +#define TSC_IOASCR_G1_IO2_Pos (1U) +#define TSC_IOASCR_G1_IO2_Msk (0x1UL << TSC_IOASCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOASCR_G1_IO2 TSC_IOASCR_G1_IO2_Msk /*!< GROUP1_IO2 analog switch enable */ +#define TSC_IOASCR_G1_IO3_Pos (2U) +#define TSC_IOASCR_G1_IO3_Msk (0x1UL << TSC_IOASCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOASCR_G1_IO3 TSC_IOASCR_G1_IO3_Msk /*!< GROUP1_IO3 analog switch enable */ +#define TSC_IOASCR_G1_IO4_Pos (3U) +#define TSC_IOASCR_G1_IO4_Msk (0x1UL << TSC_IOASCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOASCR_G1_IO4 TSC_IOASCR_G1_IO4_Msk /*!< GROUP1_IO4 analog switch enable */ +#define TSC_IOASCR_G2_IO1_Pos (4U) +#define TSC_IOASCR_G2_IO1_Msk (0x1UL << TSC_IOASCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOASCR_G2_IO1 TSC_IOASCR_G2_IO1_Msk /*!< GROUP2_IO1 analog switch enable */ +#define TSC_IOASCR_G2_IO2_Pos (5U) +#define TSC_IOASCR_G2_IO2_Msk (0x1UL << TSC_IOASCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOASCR_G2_IO2 TSC_IOASCR_G2_IO2_Msk /*!< GROUP2_IO2 analog switch enable */ +#define TSC_IOASCR_G2_IO3_Pos (6U) +#define TSC_IOASCR_G2_IO3_Msk (0x1UL << TSC_IOASCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOASCR_G2_IO3 TSC_IOASCR_G2_IO3_Msk /*!< GROUP2_IO3 analog switch enable */ +#define TSC_IOASCR_G2_IO4_Pos (7U) +#define TSC_IOASCR_G2_IO4_Msk (0x1UL << TSC_IOASCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOASCR_G2_IO4 TSC_IOASCR_G2_IO4_Msk /*!< GROUP2_IO4 analog switch enable */ +#define TSC_IOASCR_G3_IO1_Pos (8U) +#define TSC_IOASCR_G3_IO1_Msk (0x1UL << TSC_IOASCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOASCR_G3_IO1 TSC_IOASCR_G3_IO1_Msk /*!< GROUP3_IO1 analog switch enable */ +#define TSC_IOASCR_G3_IO2_Pos (9U) +#define TSC_IOASCR_G3_IO2_Msk (0x1UL << TSC_IOASCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOASCR_G3_IO2 TSC_IOASCR_G3_IO2_Msk /*!< GROUP3_IO2 analog switch enable */ +#define TSC_IOASCR_G3_IO3_Pos (10U) +#define TSC_IOASCR_G3_IO3_Msk (0x1UL << TSC_IOASCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOASCR_G3_IO3 TSC_IOASCR_G3_IO3_Msk /*!< GROUP3_IO3 analog switch enable */ +#define TSC_IOASCR_G3_IO4_Pos (11U) +#define TSC_IOASCR_G3_IO4_Msk (0x1UL << TSC_IOASCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOASCR_G3_IO4 TSC_IOASCR_G3_IO4_Msk /*!< GROUP3_IO4 analog switch enable */ +#define TSC_IOASCR_G4_IO1_Pos (12U) +#define TSC_IOASCR_G4_IO1_Msk (0x1UL << TSC_IOASCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOASCR_G4_IO1 TSC_IOASCR_G4_IO1_Msk /*!< GROUP4_IO1 analog switch enable */ +#define TSC_IOASCR_G4_IO2_Pos (13U) +#define TSC_IOASCR_G4_IO2_Msk (0x1UL << TSC_IOASCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOASCR_G4_IO2 TSC_IOASCR_G4_IO2_Msk /*!< GROUP4_IO2 analog switch enable */ +#define TSC_IOASCR_G4_IO3_Pos (14U) +#define TSC_IOASCR_G4_IO3_Msk (0x1UL << TSC_IOASCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOASCR_G4_IO3 TSC_IOASCR_G4_IO3_Msk /*!< GROUP4_IO3 analog switch enable */ +#define TSC_IOASCR_G4_IO4_Pos (15U) +#define TSC_IOASCR_G4_IO4_Msk (0x1UL << TSC_IOASCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOASCR_G4_IO4 TSC_IOASCR_G4_IO4_Msk /*!< GROUP4_IO4 analog switch enable */ +#define TSC_IOASCR_G5_IO1_Pos (16U) +#define TSC_IOASCR_G5_IO1_Msk (0x1UL << TSC_IOASCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOASCR_G5_IO1 TSC_IOASCR_G5_IO1_Msk /*!< GROUP5_IO1 analog switch enable */ +#define TSC_IOASCR_G5_IO2_Pos (17U) +#define TSC_IOASCR_G5_IO2_Msk (0x1UL << TSC_IOASCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOASCR_G5_IO2 TSC_IOASCR_G5_IO2_Msk /*!< GROUP5_IO2 analog switch enable */ +#define TSC_IOASCR_G5_IO3_Pos (18U) +#define TSC_IOASCR_G5_IO3_Msk (0x1UL << TSC_IOASCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOASCR_G5_IO3 TSC_IOASCR_G5_IO3_Msk /*!< GROUP5_IO3 analog switch enable */ +#define TSC_IOASCR_G5_IO4_Pos (19U) +#define TSC_IOASCR_G5_IO4_Msk (0x1UL << TSC_IOASCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOASCR_G5_IO4 TSC_IOASCR_G5_IO4_Msk /*!< GROUP5_IO4 analog switch enable */ +#define TSC_IOASCR_G6_IO1_Pos (20U) +#define TSC_IOASCR_G6_IO1_Msk (0x1UL << TSC_IOASCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOASCR_G6_IO1 TSC_IOASCR_G6_IO1_Msk /*!< GROUP6_IO1 analog switch enable */ +#define TSC_IOASCR_G6_IO2_Pos (21U) +#define TSC_IOASCR_G6_IO2_Msk (0x1UL << TSC_IOASCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOASCR_G6_IO2 TSC_IOASCR_G6_IO2_Msk /*!< GROUP6_IO2 analog switch enable */ +#define TSC_IOASCR_G6_IO3_Pos (22U) +#define TSC_IOASCR_G6_IO3_Msk (0x1UL << TSC_IOASCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOASCR_G6_IO3 TSC_IOASCR_G6_IO3_Msk /*!< GROUP6_IO3 analog switch enable */ +#define TSC_IOASCR_G6_IO4_Pos (23U) +#define TSC_IOASCR_G6_IO4_Msk (0x1UL << TSC_IOASCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOASCR_G6_IO4 TSC_IOASCR_G6_IO4_Msk /*!< GROUP6_IO4 analog switch enable */ +#define TSC_IOASCR_G7_IO1_Pos (24U) +#define TSC_IOASCR_G7_IO1_Msk (0x1UL << TSC_IOASCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOASCR_G7_IO1 TSC_IOASCR_G7_IO1_Msk /*!< GROUP7_IO1 analog switch enable */ +#define TSC_IOASCR_G7_IO2_Pos (25U) +#define TSC_IOASCR_G7_IO2_Msk (0x1UL << TSC_IOASCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOASCR_G7_IO2 TSC_IOASCR_G7_IO2_Msk /*!< GROUP7_IO2 analog switch enable */ +#define TSC_IOASCR_G7_IO3_Pos (26U) +#define TSC_IOASCR_G7_IO3_Msk (0x1UL << TSC_IOASCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOASCR_G7_IO3 TSC_IOASCR_G7_IO3_Msk /*!< GROUP7_IO3 analog switch enable */ +#define TSC_IOASCR_G7_IO4_Pos (27U) +#define TSC_IOASCR_G7_IO4_Msk (0x1UL << TSC_IOASCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOASCR_G7_IO4 TSC_IOASCR_G7_IO4_Msk /*!< GROUP7_IO4 analog switch enable */ + +/******************* Bit definition for TSC_IOSCR register ******************/ +#define TSC_IOSCR_G1_IO1_Pos (0U) +#define TSC_IOSCR_G1_IO1_Msk (0x1UL << TSC_IOSCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOSCR_G1_IO1 TSC_IOSCR_G1_IO1_Msk /*!< GROUP1_IO1 sampling mode */ +#define TSC_IOSCR_G1_IO2_Pos (1U) +#define TSC_IOSCR_G1_IO2_Msk (0x1UL << TSC_IOSCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOSCR_G1_IO2 TSC_IOSCR_G1_IO2_Msk /*!< GROUP1_IO2 sampling mode */ +#define TSC_IOSCR_G1_IO3_Pos (2U) +#define TSC_IOSCR_G1_IO3_Msk (0x1UL << TSC_IOSCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOSCR_G1_IO3 TSC_IOSCR_G1_IO3_Msk /*!< GROUP1_IO3 sampling mode */ +#define TSC_IOSCR_G1_IO4_Pos (3U) +#define TSC_IOSCR_G1_IO4_Msk (0x1UL << TSC_IOSCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOSCR_G1_IO4 TSC_IOSCR_G1_IO4_Msk /*!< GROUP1_IO4 sampling mode */ +#define TSC_IOSCR_G2_IO1_Pos (4U) +#define TSC_IOSCR_G2_IO1_Msk (0x1UL << TSC_IOSCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOSCR_G2_IO1 TSC_IOSCR_G2_IO1_Msk /*!< GROUP2_IO1 sampling mode */ +#define TSC_IOSCR_G2_IO2_Pos (5U) +#define TSC_IOSCR_G2_IO2_Msk (0x1UL << TSC_IOSCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOSCR_G2_IO2 TSC_IOSCR_G2_IO2_Msk /*!< GROUP2_IO2 sampling mode */ +#define TSC_IOSCR_G2_IO3_Pos (6U) +#define TSC_IOSCR_G2_IO3_Msk (0x1UL << TSC_IOSCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOSCR_G2_IO3 TSC_IOSCR_G2_IO3_Msk /*!< GROUP2_IO3 sampling mode */ +#define TSC_IOSCR_G2_IO4_Pos (7U) +#define TSC_IOSCR_G2_IO4_Msk (0x1UL << TSC_IOSCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOSCR_G2_IO4 TSC_IOSCR_G2_IO4_Msk /*!< GROUP2_IO4 sampling mode */ +#define TSC_IOSCR_G3_IO1_Pos (8U) +#define TSC_IOSCR_G3_IO1_Msk (0x1UL << TSC_IOSCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOSCR_G3_IO1 TSC_IOSCR_G3_IO1_Msk /*!< GROUP3_IO1 sampling mode */ +#define TSC_IOSCR_G3_IO2_Pos (9U) +#define TSC_IOSCR_G3_IO2_Msk (0x1UL << TSC_IOSCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOSCR_G3_IO2 TSC_IOSCR_G3_IO2_Msk /*!< GROUP3_IO2 sampling mode */ +#define TSC_IOSCR_G3_IO3_Pos (10U) +#define TSC_IOSCR_G3_IO3_Msk (0x1UL << TSC_IOSCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOSCR_G3_IO3 TSC_IOSCR_G3_IO3_Msk /*!< GROUP3_IO3 sampling mode */ +#define TSC_IOSCR_G3_IO4_Pos (11U) +#define TSC_IOSCR_G3_IO4_Msk (0x1UL << TSC_IOSCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOSCR_G3_IO4 TSC_IOSCR_G3_IO4_Msk /*!< GROUP3_IO4 sampling mode */ +#define TSC_IOSCR_G4_IO1_Pos (12U) +#define TSC_IOSCR_G4_IO1_Msk (0x1UL << TSC_IOSCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOSCR_G4_IO1 TSC_IOSCR_G4_IO1_Msk /*!< GROUP4_IO1 sampling mode */ +#define TSC_IOSCR_G4_IO2_Pos (13U) +#define TSC_IOSCR_G4_IO2_Msk (0x1UL << TSC_IOSCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOSCR_G4_IO2 TSC_IOSCR_G4_IO2_Msk /*!< GROUP4_IO2 sampling mode */ +#define TSC_IOSCR_G4_IO3_Pos (14U) +#define TSC_IOSCR_G4_IO3_Msk (0x1UL << TSC_IOSCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOSCR_G4_IO3 TSC_IOSCR_G4_IO3_Msk /*!< GROUP4_IO3 sampling mode */ +#define TSC_IOSCR_G4_IO4_Pos (15U) +#define TSC_IOSCR_G4_IO4_Msk (0x1UL << TSC_IOSCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOSCR_G4_IO4 TSC_IOSCR_G4_IO4_Msk /*!< GROUP4_IO4 sampling mode */ +#define TSC_IOSCR_G5_IO1_Pos (16U) +#define TSC_IOSCR_G5_IO1_Msk (0x1UL << TSC_IOSCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOSCR_G5_IO1 TSC_IOSCR_G5_IO1_Msk /*!< GROUP5_IO1 sampling mode */ +#define TSC_IOSCR_G5_IO2_Pos (17U) +#define TSC_IOSCR_G5_IO2_Msk (0x1UL << TSC_IOSCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOSCR_G5_IO2 TSC_IOSCR_G5_IO2_Msk /*!< GROUP5_IO2 sampling mode */ +#define TSC_IOSCR_G5_IO3_Pos (18U) +#define TSC_IOSCR_G5_IO3_Msk (0x1UL << TSC_IOSCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOSCR_G5_IO3 TSC_IOSCR_G5_IO3_Msk /*!< GROUP5_IO3 sampling mode */ +#define TSC_IOSCR_G5_IO4_Pos (19U) +#define TSC_IOSCR_G5_IO4_Msk (0x1UL << TSC_IOSCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOSCR_G5_IO4 TSC_IOSCR_G5_IO4_Msk /*!< GROUP5_IO4 sampling mode */ +#define TSC_IOSCR_G6_IO1_Pos (20U) +#define TSC_IOSCR_G6_IO1_Msk (0x1UL << TSC_IOSCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOSCR_G6_IO1 TSC_IOSCR_G6_IO1_Msk /*!< GROUP6_IO1 sampling mode */ +#define TSC_IOSCR_G6_IO2_Pos (21U) +#define TSC_IOSCR_G6_IO2_Msk (0x1UL << TSC_IOSCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOSCR_G6_IO2 TSC_IOSCR_G6_IO2_Msk /*!< GROUP6_IO2 sampling mode */ +#define TSC_IOSCR_G6_IO3_Pos (22U) +#define TSC_IOSCR_G6_IO3_Msk (0x1UL << TSC_IOSCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOSCR_G6_IO3 TSC_IOSCR_G6_IO3_Msk /*!< GROUP6_IO3 sampling mode */ +#define TSC_IOSCR_G6_IO4_Pos (23U) +#define TSC_IOSCR_G6_IO4_Msk (0x1UL << TSC_IOSCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOSCR_G6_IO4 TSC_IOSCR_G6_IO4_Msk /*!< GROUP6_IO4 sampling mode */ +#define TSC_IOSCR_G7_IO1_Pos (24U) +#define TSC_IOSCR_G7_IO1_Msk (0x1UL << TSC_IOSCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOSCR_G7_IO1 TSC_IOSCR_G7_IO1_Msk /*!< GROUP7_IO1 sampling mode */ +#define TSC_IOSCR_G7_IO2_Pos (25U) +#define TSC_IOSCR_G7_IO2_Msk (0x1UL << TSC_IOSCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOSCR_G7_IO2 TSC_IOSCR_G7_IO2_Msk /*!< GROUP7_IO2 sampling mode */ +#define TSC_IOSCR_G7_IO3_Pos (26U) +#define TSC_IOSCR_G7_IO3_Msk (0x1UL << TSC_IOSCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOSCR_G7_IO3 TSC_IOSCR_G7_IO3_Msk /*!< GROUP7_IO3 sampling mode */ +#define TSC_IOSCR_G7_IO4_Pos (27U) +#define TSC_IOSCR_G7_IO4_Msk (0x1UL << TSC_IOSCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOSCR_G7_IO4 TSC_IOSCR_G7_IO4_Msk /*!< GROUP7_IO4 sampling mode */ + +/******************* Bit definition for TSC_IOCCR register ******************/ +#define TSC_IOCCR_G1_IO1_Pos (0U) +#define TSC_IOCCR_G1_IO1_Msk (0x1UL << TSC_IOCCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOCCR_G1_IO1 TSC_IOCCR_G1_IO1_Msk /*!< GROUP1_IO1 channel mode */ +#define TSC_IOCCR_G1_IO2_Pos (1U) +#define TSC_IOCCR_G1_IO2_Msk (0x1UL << TSC_IOCCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOCCR_G1_IO2 TSC_IOCCR_G1_IO2_Msk /*!< GROUP1_IO2 channel mode */ +#define TSC_IOCCR_G1_IO3_Pos (2U) +#define TSC_IOCCR_G1_IO3_Msk (0x1UL << TSC_IOCCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOCCR_G1_IO3 TSC_IOCCR_G1_IO3_Msk /*!< GROUP1_IO3 channel mode */ +#define TSC_IOCCR_G1_IO4_Pos (3U) +#define TSC_IOCCR_G1_IO4_Msk (0x1UL << TSC_IOCCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOCCR_G1_IO4 TSC_IOCCR_G1_IO4_Msk /*!< GROUP1_IO4 channel mode */ +#define TSC_IOCCR_G2_IO1_Pos (4U) +#define TSC_IOCCR_G2_IO1_Msk (0x1UL << TSC_IOCCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOCCR_G2_IO1 TSC_IOCCR_G2_IO1_Msk /*!< GROUP2_IO1 channel mode */ +#define TSC_IOCCR_G2_IO2_Pos (5U) +#define TSC_IOCCR_G2_IO2_Msk (0x1UL << TSC_IOCCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOCCR_G2_IO2 TSC_IOCCR_G2_IO2_Msk /*!< GROUP2_IO2 channel mode */ +#define TSC_IOCCR_G2_IO3_Pos (6U) +#define TSC_IOCCR_G2_IO3_Msk (0x1UL << TSC_IOCCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOCCR_G2_IO3 TSC_IOCCR_G2_IO3_Msk /*!< GROUP2_IO3 channel mode */ +#define TSC_IOCCR_G2_IO4_Pos (7U) +#define TSC_IOCCR_G2_IO4_Msk (0x1UL << TSC_IOCCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOCCR_G2_IO4 TSC_IOCCR_G2_IO4_Msk /*!< GROUP2_IO4 channel mode */ +#define TSC_IOCCR_G3_IO1_Pos (8U) +#define TSC_IOCCR_G3_IO1_Msk (0x1UL << TSC_IOCCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOCCR_G3_IO1 TSC_IOCCR_G3_IO1_Msk /*!< GROUP3_IO1 channel mode */ +#define TSC_IOCCR_G3_IO2_Pos (9U) +#define TSC_IOCCR_G3_IO2_Msk (0x1UL << TSC_IOCCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOCCR_G3_IO2 TSC_IOCCR_G3_IO2_Msk /*!< GROUP3_IO2 channel mode */ +#define TSC_IOCCR_G3_IO3_Pos (10U) +#define TSC_IOCCR_G3_IO3_Msk (0x1UL << TSC_IOCCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOCCR_G3_IO3 TSC_IOCCR_G3_IO3_Msk /*!< GROUP3_IO3 channel mode */ +#define TSC_IOCCR_G3_IO4_Pos (11U) +#define TSC_IOCCR_G3_IO4_Msk (0x1UL << TSC_IOCCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOCCR_G3_IO4 TSC_IOCCR_G3_IO4_Msk /*!< GROUP3_IO4 channel mode */ +#define TSC_IOCCR_G4_IO1_Pos (12U) +#define TSC_IOCCR_G4_IO1_Msk (0x1UL << TSC_IOCCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOCCR_G4_IO1 TSC_IOCCR_G4_IO1_Msk /*!< GROUP4_IO1 channel mode */ +#define TSC_IOCCR_G4_IO2_Pos (13U) +#define TSC_IOCCR_G4_IO2_Msk (0x1UL << TSC_IOCCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOCCR_G4_IO2 TSC_IOCCR_G4_IO2_Msk /*!< GROUP4_IO2 channel mode */ +#define TSC_IOCCR_G4_IO3_Pos (14U) +#define TSC_IOCCR_G4_IO3_Msk (0x1UL << TSC_IOCCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOCCR_G4_IO3 TSC_IOCCR_G4_IO3_Msk /*!< GROUP4_IO3 channel mode */ +#define TSC_IOCCR_G4_IO4_Pos (15U) +#define TSC_IOCCR_G4_IO4_Msk (0x1UL << TSC_IOCCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOCCR_G4_IO4 TSC_IOCCR_G4_IO4_Msk /*!< GROUP4_IO4 channel mode */ +#define TSC_IOCCR_G5_IO1_Pos (16U) +#define TSC_IOCCR_G5_IO1_Msk (0x1UL << TSC_IOCCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOCCR_G5_IO1 TSC_IOCCR_G5_IO1_Msk /*!< GROUP5_IO1 channel mode */ +#define TSC_IOCCR_G5_IO2_Pos (17U) +#define TSC_IOCCR_G5_IO2_Msk (0x1UL << TSC_IOCCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOCCR_G5_IO2 TSC_IOCCR_G5_IO2_Msk /*!< GROUP5_IO2 channel mode */ +#define TSC_IOCCR_G5_IO3_Pos (18U) +#define TSC_IOCCR_G5_IO3_Msk (0x1UL << TSC_IOCCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOCCR_G5_IO3 TSC_IOCCR_G5_IO3_Msk /*!< GROUP5_IO3 channel mode */ +#define TSC_IOCCR_G5_IO4_Pos (19U) +#define TSC_IOCCR_G5_IO4_Msk (0x1UL << TSC_IOCCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOCCR_G5_IO4 TSC_IOCCR_G5_IO4_Msk /*!< GROUP5_IO4 channel mode */ +#define TSC_IOCCR_G6_IO1_Pos (20U) +#define TSC_IOCCR_G6_IO1_Msk (0x1UL << TSC_IOCCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOCCR_G6_IO1 TSC_IOCCR_G6_IO1_Msk /*!< GROUP6_IO1 channel mode */ +#define TSC_IOCCR_G6_IO2_Pos (21U) +#define TSC_IOCCR_G6_IO2_Msk (0x1UL << TSC_IOCCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOCCR_G6_IO2 TSC_IOCCR_G6_IO2_Msk /*!< GROUP6_IO2 channel mode */ +#define TSC_IOCCR_G6_IO3_Pos (22U) +#define TSC_IOCCR_G6_IO3_Msk (0x1UL << TSC_IOCCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOCCR_G6_IO3 TSC_IOCCR_G6_IO3_Msk /*!< GROUP6_IO3 channel mode */ +#define TSC_IOCCR_G6_IO4_Pos (23U) +#define TSC_IOCCR_G6_IO4_Msk (0x1UL << TSC_IOCCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOCCR_G6_IO4 TSC_IOCCR_G6_IO4_Msk /*!< GROUP6_IO4 channel mode */ +#define TSC_IOCCR_G7_IO1_Pos (24U) +#define TSC_IOCCR_G7_IO1_Msk (0x1UL << TSC_IOCCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOCCR_G7_IO1 TSC_IOCCR_G7_IO1_Msk /*!< GROUP7_IO1 channel mode */ +#define TSC_IOCCR_G7_IO2_Pos (25U) +#define TSC_IOCCR_G7_IO2_Msk (0x1UL << TSC_IOCCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOCCR_G7_IO2 TSC_IOCCR_G7_IO2_Msk /*!< GROUP7_IO2 channel mode */ +#define TSC_IOCCR_G7_IO3_Pos (26U) +#define TSC_IOCCR_G7_IO3_Msk (0x1UL << TSC_IOCCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOCCR_G7_IO3 TSC_IOCCR_G7_IO3_Msk /*!< GROUP7_IO3 channel mode */ +#define TSC_IOCCR_G7_IO4_Pos (27U) +#define TSC_IOCCR_G7_IO4_Msk (0x1UL << TSC_IOCCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOCCR_G7_IO4 TSC_IOCCR_G7_IO4_Msk /*!< GROUP7_IO4 channel mode */ + +/******************* Bit definition for TSC_IOGCSR register *****************/ +#define TSC_IOGCSR_G1E_Pos (0U) +#define TSC_IOGCSR_G1E_Msk (0x1UL << TSC_IOGCSR_G1E_Pos) /*!< 0x00000001 */ +#define TSC_IOGCSR_G1E TSC_IOGCSR_G1E_Msk /*!< Analog IO GROUP1 enable */ +#define TSC_IOGCSR_G2E_Pos (1U) +#define TSC_IOGCSR_G2E_Msk (0x1UL << TSC_IOGCSR_G2E_Pos) /*!< 0x00000002 */ +#define TSC_IOGCSR_G2E TSC_IOGCSR_G2E_Msk /*!< Analog IO GROUP2 enable */ +#define TSC_IOGCSR_G3E_Pos (2U) +#define TSC_IOGCSR_G3E_Msk (0x1UL << TSC_IOGCSR_G3E_Pos) /*!< 0x00000004 */ +#define TSC_IOGCSR_G3E TSC_IOGCSR_G3E_Msk /*!< Analog IO GROUP3 enable */ +#define TSC_IOGCSR_G4E_Pos (3U) +#define TSC_IOGCSR_G4E_Msk (0x1UL << TSC_IOGCSR_G4E_Pos) /*!< 0x00000008 */ +#define TSC_IOGCSR_G4E TSC_IOGCSR_G4E_Msk /*!< Analog IO GROUP4 enable */ +#define TSC_IOGCSR_G5E_Pos (4U) +#define TSC_IOGCSR_G5E_Msk (0x1UL << TSC_IOGCSR_G5E_Pos) /*!< 0x00000010 */ +#define TSC_IOGCSR_G5E TSC_IOGCSR_G5E_Msk /*!< Analog IO GROUP5 enable */ +#define TSC_IOGCSR_G6E_Pos (5U) +#define TSC_IOGCSR_G6E_Msk (0x1UL << TSC_IOGCSR_G6E_Pos) /*!< 0x00000020 */ +#define TSC_IOGCSR_G6E TSC_IOGCSR_G6E_Msk /*!< Analog IO GROUP6 enable */ +#define TSC_IOGCSR_G7E_Pos (6U) +#define TSC_IOGCSR_G7E_Msk (0x1UL << TSC_IOGCSR_G7E_Pos) /*!< 0x00000040 */ +#define TSC_IOGCSR_G7E TSC_IOGCSR_G7E_Msk /*!< Analog IO GROUP7 enable */ +#define TSC_IOGCSR_G1S_Pos (16U) +#define TSC_IOGCSR_G1S_Msk (0x1UL << TSC_IOGCSR_G1S_Pos) /*!< 0x00010000 */ +#define TSC_IOGCSR_G1S TSC_IOGCSR_G1S_Msk /*!< Analog IO GROUP1 status */ +#define TSC_IOGCSR_G2S_Pos (17U) +#define TSC_IOGCSR_G2S_Msk (0x1UL << TSC_IOGCSR_G2S_Pos) /*!< 0x00020000 */ +#define TSC_IOGCSR_G2S TSC_IOGCSR_G2S_Msk /*!< Analog IO GROUP2 status */ +#define TSC_IOGCSR_G3S_Pos (18U) +#define TSC_IOGCSR_G3S_Msk (0x1UL << TSC_IOGCSR_G3S_Pos) /*!< 0x00040000 */ +#define TSC_IOGCSR_G3S TSC_IOGCSR_G3S_Msk /*!< Analog IO GROUP3 status */ +#define TSC_IOGCSR_G4S_Pos (19U) +#define TSC_IOGCSR_G4S_Msk (0x1UL << TSC_IOGCSR_G4S_Pos) /*!< 0x00080000 */ +#define TSC_IOGCSR_G4S TSC_IOGCSR_G4S_Msk /*!< Analog IO GROUP4 status */ +#define TSC_IOGCSR_G5S_Pos (20U) +#define TSC_IOGCSR_G5S_Msk (0x1UL << TSC_IOGCSR_G5S_Pos) /*!< 0x00100000 */ +#define TSC_IOGCSR_G5S TSC_IOGCSR_G5S_Msk /*!< Analog IO GROUP5 status */ +#define TSC_IOGCSR_G6S_Pos (21U) +#define TSC_IOGCSR_G6S_Msk (0x1UL << TSC_IOGCSR_G6S_Pos) /*!< 0x00200000 */ +#define TSC_IOGCSR_G6S TSC_IOGCSR_G6S_Msk /*!< Analog IO GROUP6 status */ +#define TSC_IOGCSR_G7S_Pos (22U) +#define TSC_IOGCSR_G7S_Msk (0x1UL << TSC_IOGCSR_G7S_Pos) /*!< 0x00400000 */ +#define TSC_IOGCSR_G7S TSC_IOGCSR_G7S_Msk /*!< Analog IO GROUP7 status */ + +/******************* Bit definition for TSC_IOGXCR register *****************/ +#define TSC_IOGXCR_CNT_Pos (0U) +#define TSC_IOGXCR_CNT_Msk (0x3FFFUL << TSC_IOGXCR_CNT_Pos) /*!< 0x00003FFF */ +#define TSC_IOGXCR_CNT TSC_IOGXCR_CNT_Msk /*!< CNT[13:0] bits (Counter value) */ + +/******************************************************************************/ +/* */ +/* SYSCFG */ +/* */ +/******************************************************************************/ +/***************** Bit definition for SYSCFG_MEMRMP register (SYSCFG memory remap register) ***********************************/ +#define SYSCFG_MEMRMP_MEM_MODE_Pos (0U) +#define SYSCFG_MEMRMP_MEM_MODE_Msk (0x7UL << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000007 */ +#define SYSCFG_MEMRMP_MEM_MODE SYSCFG_MEMRMP_MEM_MODE_Msk /*!< SYSCFG_Memory Remap Config */ +#define SYSCFG_MEMRMP_MEM_MODE_0 (0x1U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000001 */ +#define SYSCFG_MEMRMP_MEM_MODE_1 (0x2U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000002 */ +#define SYSCFG_MEMRMP_MEM_MODE_2 (0x4U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000004 */ + +/***************** Bit definition for SYSCFG_CFGR1 register (SYSCFG configuration register 1) ****************************************************************/ +#define SYSCFG_CFGR1_BOOSTEN_Pos (8U) +#define SYSCFG_CFGR1_BOOSTEN_Msk (0x1UL << SYSCFG_CFGR1_BOOSTEN_Pos) /*!< 0x00000100 */ +#define SYSCFG_CFGR1_BOOSTEN SYSCFG_CFGR1_BOOSTEN_Msk /*!< I/O analog switch voltage booster enable */ +#define SYSCFG_CFGR1_I2C_PB6_FMP_Pos (16U) +#define SYSCFG_CFGR1_I2C_PB6_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB6_FMP_Pos) /*!< 0x00010000 */ +#define SYSCFG_CFGR1_I2C_PB6_FMP SYSCFG_CFGR1_I2C_PB6_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB6 */ +#define SYSCFG_CFGR1_I2C_PB7_FMP_Pos (17U) +#define SYSCFG_CFGR1_I2C_PB7_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB7_FMP_Pos) /*!< 0x00020000 */ +#define SYSCFG_CFGR1_I2C_PB7_FMP SYSCFG_CFGR1_I2C_PB7_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB7 */ +#define SYSCFG_CFGR1_I2C_PB8_FMP_Pos (18U) +#define SYSCFG_CFGR1_I2C_PB8_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB8_FMP_Pos) /*!< 0x00040000 */ +#define SYSCFG_CFGR1_I2C_PB8_FMP SYSCFG_CFGR1_I2C_PB8_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB8 */ +#define SYSCFG_CFGR1_I2C_PB9_FMP_Pos (19U) +#define SYSCFG_CFGR1_I2C_PB9_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB9_FMP_Pos) /*!< 0x00080000 */ +#define SYSCFG_CFGR1_I2C_PB9_FMP SYSCFG_CFGR1_I2C_PB9_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB9 */ +#define SYSCFG_CFGR1_I2C1_FMP_Pos (20U) +#define SYSCFG_CFGR1_I2C1_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C1_FMP_Pos) /*!< 0x00100000 */ +#define SYSCFG_CFGR1_I2C1_FMP SYSCFG_CFGR1_I2C1_FMP_Msk /*!< I2C1 Fast-mode Plus (Fm+) driving capability activation */ +#define SYSCFG_CFGR1_FPU_IE_Pos (26U) +#define SYSCFG_CFGR1_FPU_IE_Msk (0x3FUL << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0xFC000000 */ +#define SYSCFG_CFGR1_FPU_IE SYSCFG_CFGR1_FPU_IE_Msk /*!< Cortex M4 Floating Point Unit interrupts enable bits */ +#define SYSCFG_CFGR1_FPU_IE_0 (0x01U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x04000000 */ +#define SYSCFG_CFGR1_FPU_IE_1 (0x02U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x08000000 */ +#define SYSCFG_CFGR1_FPU_IE_2 (0x04U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x10000000 */ +#define SYSCFG_CFGR1_FPU_IE_3 (0x08U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x20000000 */ +#define SYSCFG_CFGR1_FPU_IE_4 (0x10U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x40000000 */ +#define SYSCFG_CFGR1_FPU_IE_5 (0x20U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x80000000 */ + +/***************** Bit definition for SYSCFG_EXTICR1 register (External interrupt configuration register 1) ********************************/ +#define SYSCFG_EXTICR1_EXTI0_Pos (0U) +#define SYSCFG_EXTICR1_EXTI0_Msk (0x7UL << SYSCFG_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR1_EXTI0 SYSCFG_EXTICR1_EXTI0_Msk /*!< External Interrupt Line 0 configuration */ +#define SYSCFG_EXTICR1_EXTI1_Pos (4U) +#define SYSCFG_EXTICR1_EXTI1_Msk (0x7UL << SYSCFG_EXTICR1_EXTI1_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR1_EXTI1 SYSCFG_EXTICR1_EXTI1_Msk /*!< External Interrupt Line 1 configuration */ +#define SYSCFG_EXTICR1_EXTI2_Pos (8U) +#define SYSCFG_EXTICR1_EXTI2_Msk (0x7UL << SYSCFG_EXTICR1_EXTI2_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR1_EXTI2 SYSCFG_EXTICR1_EXTI2_Msk /*!< External Interrupt Line 2 configuration */ +#define SYSCFG_EXTICR1_EXTI3_Pos (12U) +#define SYSCFG_EXTICR1_EXTI3_Msk (0x7UL << SYSCFG_EXTICR1_EXTI3_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR1_EXTI3 SYSCFG_EXTICR1_EXTI3_Msk /*!< External Interrupt Line 3 configuration */ + +/** + * @brief External Interrupt Line 0 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI0_PA (0x00000000UL) /*!< PA[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PB (0x00000001UL) /*!< PB[0] pin */ + +/** + * @brief External Interrupt Line 1 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI1_PA (0x00000000UL) /*!< PA[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PB (0x00000010UL) /*!< PB[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PC (0x00000020UL) /*!< PC[1] pin */ + +/** + * @brief External Interrupt Line 2 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI2_PA (0x00000000UL) /*!< PA[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PB (0x00000100UL) /*!< PB[2] pin */ + +/** + * @brief External Interrupt Line 3 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI3_PA (0x00000000UL) /*!< PA[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PB (0x00001000UL) /*!< PB[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PH (0x00007000UL) /*!< PH[3] pin */ + +/***************** Bit definition for SYSCFG_EXTICR2 register (External interrupt configuration register 2) ********************************/ +#define SYSCFG_EXTICR2_EXTI4_Pos (0U) +#define SYSCFG_EXTICR2_EXTI4_Msk (0x7UL << SYSCFG_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR2_EXTI4 SYSCFG_EXTICR2_EXTI4_Msk /*!< External Interrupt Line 4 configuration */ +#define SYSCFG_EXTICR2_EXTI5_Pos (4U) +#define SYSCFG_EXTICR2_EXTI5_Msk (0x7UL << SYSCFG_EXTICR2_EXTI5_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR2_EXTI5 SYSCFG_EXTICR2_EXTI5_Msk /*!< External Interrupt Line 5 configuration */ +#define SYSCFG_EXTICR2_EXTI6_Pos (8U) +#define SYSCFG_EXTICR2_EXTI6_Msk (0x7UL << SYSCFG_EXTICR2_EXTI6_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR2_EXTI6 SYSCFG_EXTICR2_EXTI6_Msk /*!< External Interrupt Line 6 configuration */ +#define SYSCFG_EXTICR2_EXTI7_Pos (12U) +#define SYSCFG_EXTICR2_EXTI7_Msk (0x7UL << SYSCFG_EXTICR2_EXTI7_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR2_EXTI7 SYSCFG_EXTICR2_EXTI7_Msk /*!< External Interrupt Line 7 configuration */ + +/** + * @brief External Interrupt Line 4 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI4_PA (0x00000000UL) /*!< PA[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PB (0x00000001UL) /*!< PB[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PE (0x00000004UL) /*!< PE[4] pin */ + +/** + * @brief External Interrupt Line 5 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI5_PA (0x00000000UL) /*!< PA[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PB (0x00000010UL) /*!< PB[5] pin */ + +/** + * @brief External Interrupt Line 6 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI6_PA (0x00000000UL) /*!< PA[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PB (0x00000100UL) /*!< PB[6] pin */ + +/** + * @brief External Interrupt Line 7 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI7_PA (0x00000000UL) /*!< PA[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PB (0x00001000UL) /*!< PB[7] pin */ + +/***************** Bit definition for SYSCFG_EXTICR3 register (External interrupt configuration register 3) ********************************/ +#define SYSCFG_EXTICR3_EXTI8_Pos (0U) +#define SYSCFG_EXTICR3_EXTI8_Msk (0x7UL << SYSCFG_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR3_EXTI8 SYSCFG_EXTICR3_EXTI8_Msk /*!< External Interrupt Line 8 configuration */ +#define SYSCFG_EXTICR3_EXTI9_Pos (4U) +#define SYSCFG_EXTICR3_EXTI9_Msk (0x7UL << SYSCFG_EXTICR3_EXTI9_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR3_EXTI9 SYSCFG_EXTICR3_EXTI9_Msk /*!< External Interrupt Line 9 configuration */ +#define SYSCFG_EXTICR3_EXTI10_Pos (8U) +#define SYSCFG_EXTICR3_EXTI10_Msk (0x7UL << SYSCFG_EXTICR3_EXTI10_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR3_EXTI10 SYSCFG_EXTICR3_EXTI10_Msk /*!< External Interrupt Line 10 configuration */ +#define SYSCFG_EXTICR3_EXTI11_Pos (12U) +#define SYSCFG_EXTICR3_EXTI11_Msk (0xFUL << SYSCFG_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define SYSCFG_EXTICR3_EXTI11 SYSCFG_EXTICR3_EXTI11_Msk /*!< External Interrupt Line 11 configuration */ + +/** + * @brief External Interrupt Line 8 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI8_PA (0x00000000UL) /*!< PA[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PB (0x00000001UL) /*!< PB[8] pin */ + +/** + * @brief External Interrupt Line 9 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI9_PA (0x00000000UL) /*!< PA[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PB (0x00000010UL) /*!< PB[9] pin */ + +/** + * @brief External Interrupt Line 10 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI10_PA (0x00000000UL) /*!< PA[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PB (0x00000100UL) /*!< PB[10] pin */ + +/** + * @brief External Interrupt Line 11 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI11_PA (0x00000000UL) /*!< PA[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PB (0x00001000UL) /*!< PB[11] pin */ + +/***************** Bit definition for SYSCFG_EXTICR4 register (External interrupt configuration register 4) *********************************/ +#define SYSCFG_EXTICR4_EXTI12_Pos (0U) +#define SYSCFG_EXTICR4_EXTI12_Msk (0x7UL << SYSCFG_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR4_EXTI12 SYSCFG_EXTICR4_EXTI12_Msk /*!< External Interrupt Line 12 configuration */ +#define SYSCFG_EXTICR4_EXTI13_Pos (4U) +#define SYSCFG_EXTICR4_EXTI13_Msk (0x7UL << SYSCFG_EXTICR4_EXTI13_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR4_EXTI13 SYSCFG_EXTICR4_EXTI13_Msk /*!< External Interrupt Line 13 configuration */ +#define SYSCFG_EXTICR4_EXTI14_Pos (8U) +#define SYSCFG_EXTICR4_EXTI14_Msk (0x7UL << SYSCFG_EXTICR4_EXTI14_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR4_EXTI14 SYSCFG_EXTICR4_EXTI14_Msk /*!< External Interrupt Line 14 configuration */ +#define SYSCFG_EXTICR4_EXTI15_Pos (12U) +#define SYSCFG_EXTICR4_EXTI15_Msk (0x7UL << SYSCFG_EXTICR4_EXTI15_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR4_EXTI15 SYSCFG_EXTICR4_EXTI15_Msk /*!< External Interrupt Line 15 configuration */ + +/** + * @brief External Interrupt Line 12 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI12_PA (0x00000000UL) /*!< PA[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PB (0x00000001UL) /*!< PB[12] pin */ + +/** + * @brief External Interrupt Line 13 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI13_PA (0x00000000UL) /*!< PA[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PB (0x00000010UL) /*!< PB[13] pin */ + +/** + * @brief External Interrupt Line 14 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI14_PA (0x00000000UL) /*!< PA[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PB (0x00000100UL) /*!< PB[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PC (0x00000200UL) /*!< PC[14] pin */ + +/** + * @brief External Interrupt Line 15 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI15_PA (0x00000000UL) /*!< PA[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PB (0x00001000UL) /*!< PB[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PC (0x00002000UL) /*!< PC[15] pin */ + +/***************** Bit definition for SYSCFG_SCSR register (SYSCFG SRAM2 control and status register) *********************************************************/ +#define SYSCFG_SCSR_SRAM2ER_Pos (0U) +#define SYSCFG_SCSR_SRAM2ER_Msk (0x1UL << SYSCFG_SCSR_SRAM2ER_Pos) /*!< 0x00000001 */ +#define SYSCFG_SCSR_SRAM2ER SYSCFG_SCSR_SRAM2ER_Msk /*!< SRAM2 and PKA RAM Erase */ +#define SYSCFG_SCSR_SRAM2BSY_Pos (1U) +#define SYSCFG_SCSR_SRAM2BSY_Msk (0x1UL << SYSCFG_SCSR_SRAM2BSY_Pos) /*!< 0x00000002 */ +#define SYSCFG_SCSR_SRAM2BSY SYSCFG_SCSR_SRAM2BSY_Msk /*!< SRAM2 and PKA RAM busy by erase operation */ +#define SYSCFG_SCSR_C2RFD_Pos (31U) +#define SYSCFG_SCSR_C2RFD_Msk (0x1UL << SYSCFG_SCSR_C2RFD_Pos) /*!< 0x80000000 */ +#define SYSCFG_SCSR_C2RFD SYSCFG_SCSR_C2RFD_Msk /*!< CPU2 SRAM fetch (execution) disable */ + +/***************** Bit definition for SYSCFG_CFGR2 register (SYSCFG configuration register 2) *****************************************************************/ +#define SYSCFG_CFGR2_CLL_Pos (0U) +#define SYSCFG_CFGR2_CLL_Msk (0x1UL << SYSCFG_CFGR2_CLL_Pos) /*!< 0x00000001 */ +#define SYSCFG_CFGR2_CLL SYSCFG_CFGR2_CLL_Msk /*!< Cortex M4 LOCKUP (hardfault) output enable */ +#define SYSCFG_CFGR2_SPL_Pos (1U) +#define SYSCFG_CFGR2_SPL_Msk (0x1UL << SYSCFG_CFGR2_SPL_Pos) /*!< 0x00000002 */ +#define SYSCFG_CFGR2_SPL SYSCFG_CFGR2_SPL_Msk /*!< SRAM2 Parity Lock */ +#define SYSCFG_CFGR2_PVDL_Pos (2U) +#define SYSCFG_CFGR2_PVDL_Msk (0x1UL << SYSCFG_CFGR2_PVDL_Pos) /*!< 0x00000004 */ +#define SYSCFG_CFGR2_PVDL SYSCFG_CFGR2_PVDL_Msk /*!< PVD Lock */ +#define SYSCFG_CFGR2_ECCL_Pos (3U) +#define SYSCFG_CFGR2_ECCL_Msk (0x1UL << SYSCFG_CFGR2_ECCL_Pos) /*!< 0x00000008 */ +#define SYSCFG_CFGR2_ECCL SYSCFG_CFGR2_ECCL_Msk /*!< ECC Lock */ +#define SYSCFG_CFGR2_SPF_Pos (8U) +#define SYSCFG_CFGR2_SPF_Msk (0x1UL << SYSCFG_CFGR2_SPF_Pos) /*!< 0x00000100 */ +#define SYSCFG_CFGR2_SPF SYSCFG_CFGR2_SPF_Msk /*!< SRAM2 Parity Lock */ + +/***************** Bit definition for SYSCFG_SWPR1 register (SYSCFG SRAM2A write protection register) *********************************************************/ +#define SYSCFG_SWPR1_PAGE0_Pos (0U) +#define SYSCFG_SWPR1_PAGE0_Msk (0x1UL << SYSCFG_SWPR1_PAGE0_Pos) /*!< 0x00000001 */ +#define SYSCFG_SWPR1_PAGE0 SYSCFG_SWPR1_PAGE0_Msk /*!< SRAM2A Write protection page 0 (0x20030000 � 0x200303FF) */ +#define SYSCFG_SWPR1_PAGE1_Pos (1U) +#define SYSCFG_SWPR1_PAGE1_Msk (0x1UL << SYSCFG_SWPR1_PAGE1_Pos) /*!< 0x00000002 */ +#define SYSCFG_SWPR1_PAGE1 SYSCFG_SWPR1_PAGE1_Msk /*!< SRAM2A Write protection page 1 (0x20030400 � 0x200307FF) */ +#define SYSCFG_SWPR1_PAGE2_Pos (2U) +#define SYSCFG_SWPR1_PAGE2_Msk (0x1UL << SYSCFG_SWPR1_PAGE2_Pos) /*!< 0x00000004 */ +#define SYSCFG_SWPR1_PAGE2 SYSCFG_SWPR1_PAGE2_Msk /*!< SRAM2A Write protection page 2 (0x20030800 � 0x20030BFF) */ +#define SYSCFG_SWPR1_PAGE3_Pos (3U) +#define SYSCFG_SWPR1_PAGE3_Msk (0x1UL << SYSCFG_SWPR1_PAGE3_Pos) /*!< 0x00000008 */ +#define SYSCFG_SWPR1_PAGE3 SYSCFG_SWPR1_PAGE3_Msk /*!< SRAM2A Write protection page 3 (0x20030C00 � 0x20030FFF) */ +#define SYSCFG_SWPR1_PAGE4_Pos (4U) +#define SYSCFG_SWPR1_PAGE4_Msk (0x1UL << SYSCFG_SWPR1_PAGE4_Pos) /*!< 0x00000010 */ +#define SYSCFG_SWPR1_PAGE4 SYSCFG_SWPR1_PAGE4_Msk /*!< SRAM2A Write protection page 4 (0x20031000 � 0x200313FF) */ +#define SYSCFG_SWPR1_PAGE5_Pos (5U) +#define SYSCFG_SWPR1_PAGE5_Msk (0x1UL << SYSCFG_SWPR1_PAGE5_Pos) /*!< 0x00000020 */ +#define SYSCFG_SWPR1_PAGE5 SYSCFG_SWPR1_PAGE5_Msk /*!< SRAM2A Write protection page 5 (0x20031400 � 0x200317FF) */ +#define SYSCFG_SWPR1_PAGE6_Pos (6U) +#define SYSCFG_SWPR1_PAGE6_Msk (0x1UL << SYSCFG_SWPR1_PAGE6_Pos) /*!< 0x00000040 */ +#define SYSCFG_SWPR1_PAGE6 SYSCFG_SWPR1_PAGE6_Msk /*!< SRAM2A Write protection page 6 (0x20031800 � 0x20031BFF) */ +#define SYSCFG_SWPR1_PAGE7_Pos (7U) +#define SYSCFG_SWPR1_PAGE7_Msk (0x1UL << SYSCFG_SWPR1_PAGE7_Pos) /*!< 0x00000080 */ +#define SYSCFG_SWPR1_PAGE7 SYSCFG_SWPR1_PAGE7_Msk /*!< SRAM2A Write protection page 7 (0x20031C00 � 0x20031FFF) */ +#define SYSCFG_SWPR1_PAGE8_Pos (8U) +#define SYSCFG_SWPR1_PAGE8_Msk (0x1UL << SYSCFG_SWPR1_PAGE8_Pos) /*!< 0x00000100 */ +#define SYSCFG_SWPR1_PAGE8 SYSCFG_SWPR1_PAGE8_Msk /*!< SRAM2A Write protection page 8 (0x20032000 � 0x200323FF) */ +#define SYSCFG_SWPR1_PAGE9_Pos (9U) +#define SYSCFG_SWPR1_PAGE9_Msk (0x1UL << SYSCFG_SWPR1_PAGE9_Pos) /*!< 0x00000200 */ +#define SYSCFG_SWPR1_PAGE9 SYSCFG_SWPR1_PAGE9_Msk /*!< SRAM2A Write protection page 9 (0x20032400 � 0x200327FF) */ +#define SYSCFG_SWPR1_PAGE10_Pos (10U) +#define SYSCFG_SWPR1_PAGE10_Msk (0x1UL << SYSCFG_SWPR1_PAGE10_Pos) /*!< 0x00000400 */ +#define SYSCFG_SWPR1_PAGE10 SYSCFG_SWPR1_PAGE10_Msk /*!< SRAM2A Write protection page 10 (0x20032800 � 0x20032BFF) */ +#define SYSCFG_SWPR1_PAGE11_Pos (11U) +#define SYSCFG_SWPR1_PAGE11_Msk (0x1UL << SYSCFG_SWPR1_PAGE11_Pos) /*!< 0x00000800 */ +#define SYSCFG_SWPR1_PAGE11 SYSCFG_SWPR1_PAGE11_Msk /*!< SRAM2A Write protection page 11 (0x20032C00 � 0x20032FFF) */ +#define SYSCFG_SWPR1_PAGE12_Pos (12U) +#define SYSCFG_SWPR1_PAGE12_Msk (0x1UL << SYSCFG_SWPR1_PAGE12_Pos) /*!< 0x00001000 */ +#define SYSCFG_SWPR1_PAGE12 SYSCFG_SWPR1_PAGE12_Msk /*!< SRAM2A Write protection page 12 (0x20033000 � 0x200333FF) */ +#define SYSCFG_SWPR1_PAGE13_Pos (13U) +#define SYSCFG_SWPR1_PAGE13_Msk (0x1UL << SYSCFG_SWPR1_PAGE13_Pos) /*!< 0x00002000 */ +#define SYSCFG_SWPR1_PAGE13 SYSCFG_SWPR1_PAGE13_Msk /*!< SRAM2A Write protection page 13 (0x20033400 � 0x200337FF) */ +#define SYSCFG_SWPR1_PAGE14_Pos (14U) +#define SYSCFG_SWPR1_PAGE14_Msk (0x1UL << SYSCFG_SWPR1_PAGE14_Pos) /*!< 0x00004000 */ +#define SYSCFG_SWPR1_PAGE14 SYSCFG_SWPR1_PAGE14_Msk /*!< SRAM2A Write protection page 14 (0x20033800 � 0x20033BFF) */ +#define SYSCFG_SWPR1_PAGE15_Pos (15U) +#define SYSCFG_SWPR1_PAGE15_Msk (0x1UL << SYSCFG_SWPR1_PAGE15_Pos) /*!< 0x00008000 */ +#define SYSCFG_SWPR1_PAGE15 SYSCFG_SWPR1_PAGE15_Msk /*!< SRAM2A Write protection page 15 (0x20033C00 � 0x20033FFF) */ +#define SYSCFG_SWPR1_PAGE16_Pos (16U) +#define SYSCFG_SWPR1_PAGE16_Msk (0x1UL << SYSCFG_SWPR1_PAGE16_Pos) /*!< 0x00010000 */ +#define SYSCFG_SWPR1_PAGE16 SYSCFG_SWPR1_PAGE16_Msk /*!< SRAM2A Write protection page 16 (0x20034000 � 0x200343FF) */ +#define SYSCFG_SWPR1_PAGE17_Pos (17U) +#define SYSCFG_SWPR1_PAGE17_Msk (0x1UL << SYSCFG_SWPR1_PAGE17_Pos) /*!< 0x00020000 */ +#define SYSCFG_SWPR1_PAGE17 SYSCFG_SWPR1_PAGE17_Msk /*!< SRAM2A Write protection page 17 (0x20034400 � 0x200347FF) */ +#define SYSCFG_SWPR1_PAGE18_Pos (18U) +#define SYSCFG_SWPR1_PAGE18_Msk (0x1UL << SYSCFG_SWPR1_PAGE18_Pos) /*!< 0x00040000 */ +#define SYSCFG_SWPR1_PAGE18 SYSCFG_SWPR1_PAGE18_Msk /*!< SRAM2A Write protection page 18 (0x20034800 � 0x20034BFF) */ +#define SYSCFG_SWPR1_PAGE19_Pos (19U) +#define SYSCFG_SWPR1_PAGE19_Msk (0x1UL << SYSCFG_SWPR1_PAGE19_Pos) /*!< 0x00080000 */ +#define SYSCFG_SWPR1_PAGE19 SYSCFG_SWPR1_PAGE19_Msk /*!< SRAM2A Write protection page 19 (0x20034C00 � 0x20034FFF) */ +#define SYSCFG_SWPR1_PAGE20_Pos (20U) +#define SYSCFG_SWPR1_PAGE20_Msk (0x1UL << SYSCFG_SWPR1_PAGE20_Pos) /*!< 0x00100000 */ +#define SYSCFG_SWPR1_PAGE20 SYSCFG_SWPR1_PAGE20_Msk /*!< SRAM2A Write protection page 20 (0x20035000 � 0x200353FF) */ +#define SYSCFG_SWPR1_PAGE21_Pos (21U) +#define SYSCFG_SWPR1_PAGE21_Msk (0x1UL << SYSCFG_SWPR1_PAGE21_Pos) /*!< 0x00200000 */ +#define SYSCFG_SWPR1_PAGE21 SYSCFG_SWPR1_PAGE21_Msk /*!< SRAM2A Write protection page 21 (0x20035400 � 0x200357FF) */ +#define SYSCFG_SWPR1_PAGE22_Pos (22U) +#define SYSCFG_SWPR1_PAGE22_Msk (0x1UL << SYSCFG_SWPR1_PAGE22_Pos) /*!< 0x00400000 */ +#define SYSCFG_SWPR1_PAGE22 SYSCFG_SWPR1_PAGE22_Msk /*!< SRAM2A Write protection page 22 (0x20035800 � 0x20035BFF) */ +#define SYSCFG_SWPR1_PAGE23_Pos (23U) +#define SYSCFG_SWPR1_PAGE23_Msk (0x1UL << SYSCFG_SWPR1_PAGE23_Pos) /*!< 0x00800000 */ +#define SYSCFG_SWPR1_PAGE23 SYSCFG_SWPR1_PAGE23_Msk /*!< SRAM2A Write protection page 23 (0x20035C00 � 0x20035FFF) */ +#define SYSCFG_SWPR1_PAGE24_Pos (24U) +#define SYSCFG_SWPR1_PAGE24_Msk (0x1UL << SYSCFG_SWPR1_PAGE24_Pos) /*!< 0x01000000 */ +#define SYSCFG_SWPR1_PAGE24 SYSCFG_SWPR1_PAGE24_Msk /*!< SRAM2A Write protection page 24 (0x20036000 � 0x200363FF) */ +#define SYSCFG_SWPR1_PAGE25_Pos (25U) +#define SYSCFG_SWPR1_PAGE25_Msk (0x1UL << SYSCFG_SWPR1_PAGE25_Pos) /*!< 0x02000000 */ +#define SYSCFG_SWPR1_PAGE25 SYSCFG_SWPR1_PAGE25_Msk /*!< SRAM2A Write protection page 25 (0x20036400 � 0x200367FF) */ +#define SYSCFG_SWPR1_PAGE26_Pos (26U) +#define SYSCFG_SWPR1_PAGE26_Msk (0x1UL << SYSCFG_SWPR1_PAGE26_Pos) /*!< 0x04000000 */ +#define SYSCFG_SWPR1_PAGE26 SYSCFG_SWPR1_PAGE26_Msk /*!< SRAM2A Write protection page 26 (0x20036800 � 0x20036BFF) */ +#define SYSCFG_SWPR1_PAGE27_Pos (27U) +#define SYSCFG_SWPR1_PAGE27_Msk (0x1UL << SYSCFG_SWPR1_PAGE27_Pos) /*!< 0x08000000 */ +#define SYSCFG_SWPR1_PAGE27 SYSCFG_SWPR1_PAGE27_Msk /*!< SRAM2A Write protection page 27 (0x20036C00 � 0x20036FFF) */ +#define SYSCFG_SWPR1_PAGE28_Pos (28U) +#define SYSCFG_SWPR1_PAGE28_Msk (0x1UL << SYSCFG_SWPR1_PAGE28_Pos) /*!< 0x10000000 */ +#define SYSCFG_SWPR1_PAGE28 SYSCFG_SWPR1_PAGE28_Msk /*!< SRAM2A Write protection page 28 (0x20037000 � 0x200373FF) */ +#define SYSCFG_SWPR1_PAGE29_Pos (29U) +#define SYSCFG_SWPR1_PAGE29_Msk (0x1UL << SYSCFG_SWPR1_PAGE29_Pos) /*!< 0x20000000 */ +#define SYSCFG_SWPR1_PAGE29 SYSCFG_SWPR1_PAGE29_Msk /*!< SRAM2A Write protection page 29 (0x20037400 � 0x200377FF) */ +#define SYSCFG_SWPR1_PAGE30_Pos (30U) +#define SYSCFG_SWPR1_PAGE30_Msk (0x1UL << SYSCFG_SWPR1_PAGE30_Pos) /*!< 0x40000000 */ +#define SYSCFG_SWPR1_PAGE30 SYSCFG_SWPR1_PAGE30_Msk /*!< SRAM2A Write protection page 30 (0x20037800 � 0x20037BFF) */ +#define SYSCFG_SWPR1_PAGE31_Pos (31U) +#define SYSCFG_SWPR1_PAGE31_Msk (0x1UL << SYSCFG_SWPR1_PAGE31_Pos) /*!< 0x80000000 */ +#define SYSCFG_SWPR1_PAGE31 SYSCFG_SWPR1_PAGE31_Msk /*!< SRAM2A Write protection page 31 (0x20037C00 � 0x20037FFF) */ + +/***************** Bit definition for SYSCFG_SKR register (SYSCFG SRAM2 key register) *************************************************************************/ +#define SYSCFG_SKR_KEY_Pos (0U) +#define SYSCFG_SKR_KEY_Msk (0xFFUL << SYSCFG_SKR_KEY_Pos) /*!< 0x000000FF */ +#define SYSCFG_SKR_KEY SYSCFG_SKR_KEY_Msk /*!< SRAM2 write protection key for software erase */ + +/***************** Bit definition for SYSCFG_SWPR2 register (SYSCFG SRAM2 write protection register) **********************************************************/ +#define SYSCFG_SWPR2_PAGE32_Pos (0U) +#define SYSCFG_SWPR2_PAGE32_Msk (0x1UL << SYSCFG_SWPR2_PAGE32_Pos) /*!< 0x00000001 */ +#define SYSCFG_SWPR2_PAGE32 SYSCFG_SWPR2_PAGE32_Msk /*!< SRAM2B Write protection page 0 (0x20038000 � 0x200383FF) */ +#define SYSCFG_SWPR2_PAGE33_Pos (1U) +#define SYSCFG_SWPR2_PAGE33_Msk (0x1UL << SYSCFG_SWPR2_PAGE33_Pos) /*!< 0x00000002 */ +#define SYSCFG_SWPR2_PAGE33 SYSCFG_SWPR2_PAGE33_Msk /*!< SRAM2B Write protection page 1 (0x20038400 � 0x200387FF) */ +#define SYSCFG_SWPR2_PAGE34_Pos (2U) +#define SYSCFG_SWPR2_PAGE34_Msk (0x1UL << SYSCFG_SWPR2_PAGE34_Pos) /*!< 0x00000004 */ +#define SYSCFG_SWPR2_PAGE34 SYSCFG_SWPR2_PAGE34_Msk /*!< SRAM2B Write protection page 2 (0x20038800 � 0x20038bFF) */ +#define SYSCFG_SWPR2_PAGE35_Pos (3U) +#define SYSCFG_SWPR2_PAGE35_Msk (0x1UL << SYSCFG_SWPR2_PAGE35_Pos) /*!< 0x00000008 */ +#define SYSCFG_SWPR2_PAGE35 SYSCFG_SWPR2_PAGE35_Msk /*!< SRAM2B Write protection page 3 (0x20038C00 � 0x20038FFF) */ + +/***************** Bit definition for SYSCFG_IMR1 register (Interrupt masks control and status register on CPU1 - part 1) *******************************************/ +#define SYSCFG_IMR1_TIM1IM_Pos (13U) +#define SYSCFG_IMR1_TIM1IM_Msk (0x1UL << SYSCFG_IMR1_TIM1IM_Pos) /*!< 0x00002000 */ +#define SYSCFG_IMR1_TIM1IM SYSCFG_IMR1_TIM1IM_Msk /*!< Enabling of interrupt from Timer 1 to CPU1 */ +#define SYSCFG_IMR1_EXTI5IM_Pos (21U) +#define SYSCFG_IMR1_EXTI5IM_Msk (0x1UL << SYSCFG_IMR1_EXTI5IM_Pos) /*!< 0x00200000 */ +#define SYSCFG_IMR1_EXTI5IM SYSCFG_IMR1_EXTI5IM_Msk /*!< Enabling of interrupt from External Interrupt Line 5 to CPU1 */ +#define SYSCFG_IMR1_EXTI6IM_Pos (22U) +#define SYSCFG_IMR1_EXTI6IM_Msk (0x1UL << SYSCFG_IMR1_EXTI6IM_Pos) /*!< 0x00400000 */ +#define SYSCFG_IMR1_EXTI6IM SYSCFG_IMR1_EXTI6IM_Msk /*!< Enabling of interrupt from External Interrupt Line 6 to CPU1 */ +#define SYSCFG_IMR1_EXTI7IM_Pos (23U) +#define SYSCFG_IMR1_EXTI7IM_Msk (0x1UL << SYSCFG_IMR1_EXTI7IM_Pos) /*!< 0x00800000 */ +#define SYSCFG_IMR1_EXTI7IM SYSCFG_IMR1_EXTI7IM_Msk /*!< Enabling of interrupt from External Interrupt Line 7 to CPU1 */ +#define SYSCFG_IMR1_EXTI8IM_Pos (24U) +#define SYSCFG_IMR1_EXTI8IM_Msk (0x1UL << SYSCFG_IMR1_EXTI8IM_Pos) /*!< 0x01000000 */ +#define SYSCFG_IMR1_EXTI8IM SYSCFG_IMR1_EXTI8IM_Msk /*!< Enabling of interrupt from External Interrupt Line 8 to CPU1 */ +#define SYSCFG_IMR1_EXTI9IM_Pos (25U) +#define SYSCFG_IMR1_EXTI9IM_Msk (0x1UL << SYSCFG_IMR1_EXTI9IM_Pos) /*!< 0x02000000 */ +#define SYSCFG_IMR1_EXTI9IM SYSCFG_IMR1_EXTI9IM_Msk /*!< Enabling of interrupt from External Interrupt Line 9 to CPU1 */ +#define SYSCFG_IMR1_EXTI10IM_Pos (26U) +#define SYSCFG_IMR1_EXTI10IM_Msk (0x1UL << SYSCFG_IMR1_EXTI10IM_Pos) /*!< 0x04000000 */ +#define SYSCFG_IMR1_EXTI10IM SYSCFG_IMR1_EXTI10IM_Msk /*!< Enabling of interrupt from External Interrupt Line 10 to CPU1 */ +#define SYSCFG_IMR1_EXTI11IM_Pos (27U) +#define SYSCFG_IMR1_EXTI11IM_Msk (0x1UL << SYSCFG_IMR1_EXTI11IM_Pos) /*!< 0x08000000 */ +#define SYSCFG_IMR1_EXTI11IM SYSCFG_IMR1_EXTI11IM_Msk /*!< Enabling of interrupt from External Interrupt Line 11 to CPU1 */ +#define SYSCFG_IMR1_EXTI12IM_Pos (28U) +#define SYSCFG_IMR1_EXTI12IM_Msk (0x1UL << SYSCFG_IMR1_EXTI12IM_Pos) /*!< 0x10000000 */ +#define SYSCFG_IMR1_EXTI12IM SYSCFG_IMR1_EXTI12IM_Msk /*!< Enabling of interrupt from External Interrupt Line 12 to CPU1 */ +#define SYSCFG_IMR1_EXTI13IM_Pos (29U) +#define SYSCFG_IMR1_EXTI13IM_Msk (0x1UL << SYSCFG_IMR1_EXTI13IM_Pos) /*!< 0x20000000 */ +#define SYSCFG_IMR1_EXTI13IM SYSCFG_IMR1_EXTI13IM_Msk /*!< Enabling of interrupt from External Interrupt Line 13 to CPU1 */ +#define SYSCFG_IMR1_EXTI14IM_Pos (30U) +#define SYSCFG_IMR1_EXTI14IM_Msk (0x1UL << SYSCFG_IMR1_EXTI14IM_Pos) /*!< 0x40000000 */ +#define SYSCFG_IMR1_EXTI14IM SYSCFG_IMR1_EXTI14IM_Msk /*!< Enabling of interrupt from External Interrupt Line 14 to CPU1 */ +#define SYSCFG_IMR1_EXTI15IM_Pos (31U) +#define SYSCFG_IMR1_EXTI15IM_Msk (0x1UL << SYSCFG_IMR1_EXTI15IM_Pos) /*!< 0x80000000 */ +#define SYSCFG_IMR1_EXTI15IM SYSCFG_IMR1_EXTI15IM_Msk /*!< Enabling of interrupt from External Interrupt Line 15 to CPU1 */ + +/***************** Bit definition for SYSCFG_IMR2 register (Interrupt masks control and status register on CPU1 - part 2) *******************************************/ +#define SYSCFG_IMR2_PVM3IM_Pos (18U) +#define SYSCFG_IMR2_PVM3IM_Msk (0x1UL << SYSCFG_IMR2_PVM3IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_IMR2_PVM3IM SYSCFG_IMR2_PVM3IM_Msk /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU1 */ +#define SYSCFG_IMR2_PVDIM_Pos (20U) +#define SYSCFG_IMR2_PVDIM_Msk (0x1UL << SYSCFG_IMR2_PVDIM_Pos) /*!< 0x00100000 */ +#define SYSCFG_IMR2_PVDIM SYSCFG_IMR2_PVDIM_Msk /*!< Enabling of interrupt from Power Voltage Detector to CPU1 */ + +/***************** Bit definition for SYSCFG_C2IMR1 register (Interrupt masks control and status register on CPU2 - part 1) *******************************************/ +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Pos (0U) +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Pos) /*!< 0x00000001 */ +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Msk /* !< Enabling of interrupt from RTC TimeStamp, RTC Tampers + and LSE Clock Security System to CPU2 */ +#define SYSCFG_C2IMR1_RTCWKUPIM_Pos (3U) +#define SYSCFG_C2IMR1_RTCWKUPIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCWKUPIM_Pos) /*!< 0x00000008 */ +#define SYSCFG_C2IMR1_RTCWKUPIM SYSCFG_C2IMR1_RTCWKUPIM_Msk /*!< Enabling of interrupt from RTC Wakeup to CPU2 */ +#define SYSCFG_C2IMR1_RTCALARMIM_Pos (4U) +#define SYSCFG_C2IMR1_RTCALARMIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCALARMIM_Pos) /*!< 0x00000010 */ +#define SYSCFG_C2IMR1_RTCALARMIM SYSCFG_C2IMR1_RTCALARMIM_Msk /*!< Enabling of interrupt from RTC Alarms to CPU2 */ +#define SYSCFG_C2IMR1_RCCIM_Pos (5U) +#define SYSCFG_C2IMR1_RCCIM_Msk (0x1UL << SYSCFG_C2IMR1_RCCIM_Pos) /*!< 0x00000020 */ +#define SYSCFG_C2IMR1_RCCIM SYSCFG_C2IMR1_RCCIM_Msk /*!< Enabling of interrupt from RCC to CPU2 */ +#define SYSCFG_C2IMR1_FLASHIM_Pos (6U) +#define SYSCFG_C2IMR1_FLASHIM_Msk (0x1UL << SYSCFG_C2IMR1_FLASHIM_Pos) /*!< 0x00000040 */ +#define SYSCFG_C2IMR1_FLASHIM SYSCFG_C2IMR1_FLASHIM_Msk /*!< Enabling of interrupt from FLASH to CPU2 */ +#define SYSCFG_C2IMR1_PKAIM_Pos (8U) +#define SYSCFG_C2IMR1_PKAIM_Msk (0x1UL << SYSCFG_C2IMR1_PKAIM_Pos) /*!< 0x00000100 */ +#define SYSCFG_C2IMR1_PKAIM SYSCFG_C2IMR1_PKAIM_Msk /*!< Enabling of interrupt from Public Key Accelerator to CPU2 */ +#define SYSCFG_C2IMR1_RNGIM_Pos (9U) +#define SYSCFG_C2IMR1_RNGIM_Msk (0x1UL << SYSCFG_C2IMR1_RNGIM_Pos) /*!< 0x00000200 */ +#define SYSCFG_C2IMR1_RNGIM SYSCFG_C2IMR1_RNGIM_Msk /*!< Enabling of interrupt from Random Number Generator to CPU2 */ +#define SYSCFG_C2IMR1_COMPIM_Pos (11U) +#define SYSCFG_C2IMR1_COMPIM_Msk (0x1UL << SYSCFG_C2IMR1_COMPIM_Pos) /*!< 0x00000800 */ +#define SYSCFG_C2IMR1_COMPIM SYSCFG_C2IMR1_COMPIM_Msk /*!< Enabling of interrupt from Comparator to CPU2 */ +#define SYSCFG_C2IMR1_ADCIM_Pos (12U) +#define SYSCFG_C2IMR1_ADCIM_Msk (0x1UL << SYSCFG_C2IMR1_ADCIM_Pos) /*!< 0x00001000 */ +#define SYSCFG_C2IMR1_ADCIM SYSCFG_C2IMR1_ADCIM_Msk /*!< Enabling of interrupt from Analog Digital Converter to CPU2 */ +#define SYSCFG_C2IMR1_EXTI0IM_Pos (16U) +#define SYSCFG_C2IMR1_EXTI0IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI0IM_Pos) /*!< 0x00010000 */ +#define SYSCFG_C2IMR1_EXTI0IM SYSCFG_C2IMR1_EXTI0IM_Msk /*!< Enabling of interrupt from External Interrupt Line 0 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI1IM_Pos (17U) +#define SYSCFG_C2IMR1_EXTI1IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI1IM_Pos) /*!< 0x00020000 */ +#define SYSCFG_C2IMR1_EXTI1IM SYSCFG_C2IMR1_EXTI1IM_Msk /*!< Enabling of interrupt from External Interrupt Line 1 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI2IM_Pos (18U) +#define SYSCFG_C2IMR1_EXTI2IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI2IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_C2IMR1_EXTI2IM SYSCFG_C2IMR1_EXTI2IM_Msk /*!< Enabling of interrupt from External Interrupt Line 2 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI3IM_Pos (19U) +#define SYSCFG_C2IMR1_EXTI3IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI3IM_Pos) /*!< 0x00080000 */ +#define SYSCFG_C2IMR1_EXTI3IM SYSCFG_C2IMR1_EXTI3IM_Msk /*!< Enabling of interrupt from External Interrupt Line 3 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI4IM_Pos (20U) +#define SYSCFG_C2IMR1_EXTI4IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI4IM_Pos) /*!< 0x00100000 */ +#define SYSCFG_C2IMR1_EXTI4IM SYSCFG_C2IMR1_EXTI4IM_Msk /*!< Enabling of interrupt from External Interrupt Line 4 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI5IM_Pos (21U) +#define SYSCFG_C2IMR1_EXTI5IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI5IM_Pos) /*!< 0x00200000 */ +#define SYSCFG_C2IMR1_EXTI5IM SYSCFG_C2IMR1_EXTI5IM_Msk /*!< Enabling of interrupt from External Interrupt Line 5 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI6IM_Pos (22U) +#define SYSCFG_C2IMR1_EXTI6IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI6IM_Pos) /*!< 0x00400000 */ +#define SYSCFG_C2IMR1_EXTI6IM SYSCFG_C2IMR1_EXTI6IM_Msk /*!< Enabling of interrupt from External Interrupt Line 6 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI7IM_Pos (23U) +#define SYSCFG_C2IMR1_EXTI7IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI7IM_Pos) /*!< 0x00800000 */ +#define SYSCFG_C2IMR1_EXTI7IM SYSCFG_C2IMR1_EXTI7IM_Msk /*!< Enabling of interrupt from External Interrupt Line 7 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI8IM_Pos (24U) +#define SYSCFG_C2IMR1_EXTI8IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI8IM_Pos) /*!< 0x01000000 */ +#define SYSCFG_C2IMR1_EXTI8IM SYSCFG_C2IMR1_EXTI8IM_Msk /*!< Enabling of interrupt from External Interrupt Line 8 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI9IM_Pos (25U) +#define SYSCFG_C2IMR1_EXTI9IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI9IM_Pos) /*!< 0x02000000 */ +#define SYSCFG_C2IMR1_EXTI9IM SYSCFG_C2IMR1_EXTI9IM_Msk /*!< Enabling of interrupt from External Interrupt Line 9 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI10IM_Pos (26U) +#define SYSCFG_C2IMR1_EXTI10IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI10IM_Pos) /*!< 0x04000000 */ +#define SYSCFG_C2IMR1_EXTI10IM SYSCFG_C2IMR1_EXTI10IM_Msk /*!< Enabling of interrupt from External Interrupt Line 10 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI11IM_Pos (27U) +#define SYSCFG_C2IMR1_EXTI11IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI11IM_Pos) /*!< 0x08000000 */ +#define SYSCFG_C2IMR1_EXTI11IM SYSCFG_C2IMR1_EXTI11IM_Msk /*!< Enabling of interrupt from External Interrupt Line 11 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI12IM_Pos (28U) +#define SYSCFG_C2IMR1_EXTI12IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI12IM_Pos) /*!< 0x10000000 */ +#define SYSCFG_C2IMR1_EXTI12IM SYSCFG_C2IMR1_EXTI12IM_Msk /*!< Enabling of interrupt from External Interrupt Line 12 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI13IM_Pos (29U) +#define SYSCFG_C2IMR1_EXTI13IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI13IM_Pos) /*!< 0x20000000 */ +#define SYSCFG_C2IMR1_EXTI13IM SYSCFG_C2IMR1_EXTI13IM_Msk /*!< Enabling of interrupt from External Interrupt Line 13 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI14IM_Pos (30U) +#define SYSCFG_C2IMR1_EXTI14IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI14IM_Pos) /*!< 0x40000000 */ +#define SYSCFG_C2IMR1_EXTI14IM SYSCFG_C2IMR1_EXTI14IM_Msk /*!< Enabling of interrupt from External Interrupt Line 14 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI15IM_Pos (31U) +#define SYSCFG_C2IMR1_EXTI15IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI15IM_Pos) /*!< 0x80000000 */ +#define SYSCFG_C2IMR1_EXTI15IM SYSCFG_C2IMR1_EXTI15IM_Msk /*!< Enabling of interrupt from External Interrupt Line 15 to CPU2 */ + +/***************** Bit definition for SYSCFG_C2IMR2 register (Interrupt masks control and status register on CPU2 - part 2) *******************************************/ +#define SYSCFG_C2IMR2_DMA1CH1IM_Pos (0U) +#define SYSCFG_C2IMR2_DMA1CH1IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH1IM_Pos) /*!< 0x00000001 */ +#define SYSCFG_C2IMR2_DMA1CH1IM SYSCFG_C2IMR2_DMA1CH1IM_Msk /*!< Enabling of interrupt from DMA1 Channel 1 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH2IM_Pos (1U) +#define SYSCFG_C2IMR2_DMA1CH2IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH2IM_Pos) /*!< 0x00000002 */ +#define SYSCFG_C2IMR2_DMA1CH2IM SYSCFG_C2IMR2_DMA1CH2IM_Msk /*!< Enabling of interrupt from DMA1 Channel 2 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH3IM_Pos (2U) +#define SYSCFG_C2IMR2_DMA1CH3IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH3IM_Pos) /*!< 0x00000004 */ +#define SYSCFG_C2IMR2_DMA1CH3IM SYSCFG_C2IMR2_DMA1CH3IM_Msk /*!< Enabling of interrupt from DMA1 Channel 3 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH4IM_Pos (3U) +#define SYSCFG_C2IMR2_DMA1CH4IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH4IM_Pos) /*!< 0x00000008 */ +#define SYSCFG_C2IMR2_DMA1CH4IM SYSCFG_C2IMR2_DMA1CH4IM_Msk /*!< Enabling of interrupt from DMA1 Channel 4 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH5IM_Pos (4U) +#define SYSCFG_C2IMR2_DMA1CH5IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH5IM_Pos) /*!< 0x00000010 */ +#define SYSCFG_C2IMR2_DMA1CH5IM SYSCFG_C2IMR2_DMA1CH5IM_Msk /*!< Enabling of interrupt from DMA1 Channel 5 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH6IM_Pos (5U) +#define SYSCFG_C2IMR2_DMA1CH6IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH6IM_Pos) /*!< 0x00000020 */ +#define SYSCFG_C2IMR2_DMA1CH6IM SYSCFG_C2IMR2_DMA1CH6IM_Msk /*!< Enabling of interrupt from DMA1 Channel 6 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH7IM_Pos (6U) +#define SYSCFG_C2IMR2_DMA1CH7IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH7IM_Pos) /*!< 0x00000040 */ +#define SYSCFG_C2IMR2_DMA1CH7IM SYSCFG_C2IMR2_DMA1CH7IM_Msk /*!< Enabling of interrupt from DMA1 Channel 7 to CPU2 */ +#define SYSCFG_C2IMR2_DMAMUX1IM_Pos (15U) +#define SYSCFG_C2IMR2_DMAMUX1IM_Msk (0x1UL << SYSCFG_C2IMR2_DMAMUX1IM_Pos) /*!< 0x00008000 */ +#define SYSCFG_C2IMR2_DMAMUX1IM SYSCFG_C2IMR2_DMAMUX1IM_Msk /*!< Enabling of interrupt from DMAMUX1 to CPU2 */ +#define SYSCFG_C2IMR2_PVM3IM_Pos (18U) +#define SYSCFG_C2IMR2_PVM3IM_Msk (0x1UL << SYSCFG_C2IMR2_PVM3IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_C2IMR2_PVM3IM SYSCFG_C2IMR2_PVM3IM_Msk /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU2 */ +#define SYSCFG_C2IMR2_PVDIM_Pos (20U) +#define SYSCFG_C2IMR2_PVDIM_Msk (0x1UL << SYSCFG_C2IMR2_PVDIM_Pos) /*!< 0x00100000 */ +#define SYSCFG_C2IMR2_PVDIM SYSCFG_C2IMR2_PVDIM_Msk /*!< Enabling of interrupt from Power Voltage Detector to CPU2 */ +#define SYSCFG_C2IMR2_TSCIM_Pos (21U) +#define SYSCFG_C2IMR2_TSCIM_Msk (0x1UL << SYSCFG_C2IMR2_TSCIM_Pos) /*!< 0x00200000 */ +#define SYSCFG_C2IMR2_TSCIM SYSCFG_C2IMR2_TSCIM_Msk /*!< Enabling of interrupt from Touch Sensing Controller to CPU2 */ + +/***************** Bit definition for SYSCFG_SIPCR register (SYSCFG secure IP control register) *****************************************************************************/ +#define SYSCFG_SIPCR_SAES2_Pos (1U) +#define SYSCFG_SIPCR_SAES2_Msk (0x1UL << SYSCFG_SIPCR_SAES2_Pos) /*!< 0x00000002 */ +#define SYSCFG_SIPCR_SAES2 SYSCFG_SIPCR_SAES2_Msk /*!< Enabling the security access of Advanced Encryption Standard 2 */ +#define SYSCFG_SIPCR_SPKA_Pos (2U) +#define SYSCFG_SIPCR_SPKA_Msk (0x1UL << SYSCFG_SIPCR_SPKA_Pos) /*!< 0x00000004 */ +#define SYSCFG_SIPCR_SPKA SYSCFG_SIPCR_SPKA_Msk /*!< Enabling the security access of Public Key Accelerator */ +#define SYSCFG_SIPCR_SRNG_Pos (3U) +#define SYSCFG_SIPCR_SRNG_Msk (0x1UL << SYSCFG_SIPCR_SRNG_Pos) /*!< 0x00000008 */ +#define SYSCFG_SIPCR_SRNG SYSCFG_SIPCR_SRNG_Msk /*!< Enabling the security access of Random Number Generator */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!<Counter enable */ +#define TIM_CR1_UDIS_Pos (1U) +#define TIM_CR1_UDIS_Msk (0x1UL << TIM_CR1_UDIS_Pos) /*!< 0x00000002 */ +#define TIM_CR1_UDIS TIM_CR1_UDIS_Msk /*!<Update disable */ +#define TIM_CR1_URS_Pos (2U) +#define TIM_CR1_URS_Msk (0x1UL << TIM_CR1_URS_Pos) /*!< 0x00000004 */ +#define TIM_CR1_URS TIM_CR1_URS_Msk /*!<Update request source */ +#define TIM_CR1_OPM_Pos (3U) +#define TIM_CR1_OPM_Msk (0x1UL << TIM_CR1_OPM_Pos) /*!< 0x00000008 */ +#define TIM_CR1_OPM TIM_CR1_OPM_Msk /*!<One pulse mode */ +#define TIM_CR1_DIR_Pos (4U) +#define TIM_CR1_DIR_Msk (0x1UL << TIM_CR1_DIR_Pos) /*!< 0x00000010 */ +#define TIM_CR1_DIR TIM_CR1_DIR_Msk /*!<Direction */ + +#define TIM_CR1_CMS_Pos (5U) +#define TIM_CR1_CMS_Msk (0x3UL << TIM_CR1_CMS_Pos) /*!< 0x00000060 */ +#define TIM_CR1_CMS TIM_CR1_CMS_Msk /*!<CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 (0x1U << TIM_CR1_CMS_Pos) /*!< 0x00000020 */ +#define TIM_CR1_CMS_1 (0x2U << TIM_CR1_CMS_Pos) /*!< 0x00000040 */ + +#define TIM_CR1_ARPE_Pos (7U) +#define TIM_CR1_ARPE_Msk (0x1UL << TIM_CR1_ARPE_Pos) /*!< 0x00000080 */ +#define TIM_CR1_ARPE TIM_CR1_ARPE_Msk /*!<Auto-reload preload enable */ + +#define TIM_CR1_CKD_Pos (8U) +#define TIM_CR1_CKD_Msk (0x3UL << TIM_CR1_CKD_Pos) /*!< 0x00000300 */ +#define TIM_CR1_CKD TIM_CR1_CKD_Msk /*!<CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 (0x1U << TIM_CR1_CKD_Pos) /*!< 0x00000100 */ +#define TIM_CR1_CKD_1 (0x2U << TIM_CR1_CKD_Pos) /*!< 0x00000200 */ + +#define TIM_CR1_UIFREMAP_Pos (11U) +#define TIM_CR1_UIFREMAP_Msk (0x1UL << TIM_CR1_UIFREMAP_Pos) /*!< 0x00000800 */ +#define TIM_CR1_UIFREMAP TIM_CR1_UIFREMAP_Msk /*!<Update interrupt flag remap */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC_Pos (0U) +#define TIM_CR2_CCPC_Msk (0x1UL << TIM_CR2_CCPC_Pos) /*!< 0x00000001 */ +#define TIM_CR2_CCPC TIM_CR2_CCPC_Msk /*!<Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS_Pos (2U) +#define TIM_CR2_CCUS_Msk (0x1UL << TIM_CR2_CCUS_Pos) /*!< 0x00000004 */ +#define TIM_CR2_CCUS TIM_CR2_CCUS_Msk /*!<Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS_Pos (3U) +#define TIM_CR2_CCDS_Msk (0x1UL << TIM_CR2_CCDS_Pos) /*!< 0x00000008 */ +#define TIM_CR2_CCDS TIM_CR2_CCDS_Msk /*!<Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS_Pos (4U) +#define TIM_CR2_MMS_Msk (0x7UL << TIM_CR2_MMS_Pos) /*!< 0x00000070 */ +#define TIM_CR2_MMS TIM_CR2_MMS_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 (0x1U << TIM_CR2_MMS_Pos) /*!< 0x00000010 */ +#define TIM_CR2_MMS_1 (0x2U << TIM_CR2_MMS_Pos) /*!< 0x00000020 */ +#define TIM_CR2_MMS_2 (0x4U << TIM_CR2_MMS_Pos) /*!< 0x00000040 */ + +#define TIM_CR2_TI1S_Pos (7U) +#define TIM_CR2_TI1S_Msk (0x1UL << TIM_CR2_TI1S_Pos) /*!< 0x00000080 */ +#define TIM_CR2_TI1S TIM_CR2_TI1S_Msk /*!<TI1 Selection */ +#define TIM_CR2_OIS1_Pos (8U) +#define TIM_CR2_OIS1_Msk (0x1UL << TIM_CR2_OIS1_Pos) /*!< 0x00000100 */ +#define TIM_CR2_OIS1 TIM_CR2_OIS1_Msk /*!<Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N_Pos (9U) +#define TIM_CR2_OIS1N_Msk (0x1UL << TIM_CR2_OIS1N_Pos) /*!< 0x00000200 */ +#define TIM_CR2_OIS1N TIM_CR2_OIS1N_Msk /*!<Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2_Pos (10U) +#define TIM_CR2_OIS2_Msk (0x1UL << TIM_CR2_OIS2_Pos) /*!< 0x00000400 */ +#define TIM_CR2_OIS2 TIM_CR2_OIS2_Msk /*!<Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N_Pos (11U) +#define TIM_CR2_OIS2N_Msk (0x1UL << TIM_CR2_OIS2N_Pos) /*!< 0x00000800 */ +#define TIM_CR2_OIS2N TIM_CR2_OIS2N_Msk /*!<Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3_Pos (12U) +#define TIM_CR2_OIS3_Msk (0x1UL << TIM_CR2_OIS3_Pos) /*!< 0x00001000 */ +#define TIM_CR2_OIS3 TIM_CR2_OIS3_Msk /*!<Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N_Pos (13U) +#define TIM_CR2_OIS3N_Msk (0x1UL << TIM_CR2_OIS3N_Pos) /*!< 0x00002000 */ +#define TIM_CR2_OIS3N TIM_CR2_OIS3N_Msk /*!<Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4_Pos (14U) +#define TIM_CR2_OIS4_Msk (0x1UL << TIM_CR2_OIS4_Pos) /*!< 0x00004000 */ +#define TIM_CR2_OIS4 TIM_CR2_OIS4_Msk /*!<Output Idle state 4 (OC4 output) */ +#define TIM_CR2_OIS5_Pos (16U) +#define TIM_CR2_OIS5_Msk (0x1UL << TIM_CR2_OIS5_Pos) /*!< 0x00010000 */ +#define TIM_CR2_OIS5 TIM_CR2_OIS5_Msk /*!<Output Idle state 5 (OC5 output) */ +#define TIM_CR2_OIS6_Pos (18U) +#define TIM_CR2_OIS6_Msk (0x1UL << TIM_CR2_OIS6_Pos) /*!< 0x00040000 */ +#define TIM_CR2_OIS6 TIM_CR2_OIS6_Msk /*!<Output Idle state 6 (OC6 output) */ + +#define TIM_CR2_MMS2_Pos (20U) +#define TIM_CR2_MMS2_Msk (0xFUL << TIM_CR2_MMS2_Pos) /*!< 0x00F00000 */ +#define TIM_CR2_MMS2 TIM_CR2_MMS2_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS2_0 (0x1U << TIM_CR2_MMS2_Pos) /*!< 0x00100000 */ +#define TIM_CR2_MMS2_1 (0x2U << TIM_CR2_MMS2_Pos) /*!< 0x00200000 */ +#define TIM_CR2_MMS2_2 (0x4U << TIM_CR2_MMS2_Pos) /*!< 0x00400000 */ +#define TIM_CR2_MMS2_3 (0x8U << TIM_CR2_MMS2_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS_Pos (0U) +#define TIM_SMCR_SMS_Msk (0x10007UL << TIM_SMCR_SMS_Pos) /*!< 0x00010007 */ +#define TIM_SMCR_SMS TIM_SMCR_SMS_Msk /*!<SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 (0x00001U << TIM_SMCR_SMS_Pos) /*!< 0x00000001 */ +#define TIM_SMCR_SMS_1 (0x00002U << TIM_SMCR_SMS_Pos) /*!< 0x00000002 */ +#define TIM_SMCR_SMS_2 (0x00004U << TIM_SMCR_SMS_Pos) /*!< 0x00000004 */ +#define TIM_SMCR_SMS_3 (0x10000U << TIM_SMCR_SMS_Pos) /*!< 0x00010000 */ + +#define TIM_SMCR_OCCS_Pos (3U) +#define TIM_SMCR_OCCS_Msk (0x1UL << TIM_SMCR_OCCS_Pos) /*!< 0x00000008 */ +#define TIM_SMCR_OCCS TIM_SMCR_OCCS_Msk /*!< OCREF clear selection */ + +#define TIM_SMCR_TS_Pos (4U) +#define TIM_SMCR_TS_Msk (0x30007UL << TIM_SMCR_TS_Pos) /*!< 0x00300070 */ +#define TIM_SMCR_TS TIM_SMCR_TS_Msk /*!<TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 (0x00001U << TIM_SMCR_TS_Pos) /*!< 0x00000010 */ +#define TIM_SMCR_TS_1 (0x00002U << TIM_SMCR_TS_Pos) /*!< 0x00000020 */ +#define TIM_SMCR_TS_2 (0x00004U << TIM_SMCR_TS_Pos) /*!< 0x00000040 */ +#define TIM_SMCR_TS_3 (0x10000U << TIM_SMCR_TS_Pos) /*!< 0x00100000 */ +#define TIM_SMCR_TS_4 (0x20000U << TIM_SMCR_TS_Pos) /*!< 0x00200000 */ + +#define TIM_SMCR_MSM_Pos (7U) +#define TIM_SMCR_MSM_Msk (0x1UL << TIM_SMCR_MSM_Pos) /*!< 0x00000080 */ +#define TIM_SMCR_MSM TIM_SMCR_MSM_Msk /*!<Master/slave mode */ + +#define TIM_SMCR_ETF_Pos (8U) +#define TIM_SMCR_ETF_Msk (0xFUL << TIM_SMCR_ETF_Pos) /*!< 0x00000F00 */ +#define TIM_SMCR_ETF TIM_SMCR_ETF_Msk /*!<ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 (0x1U << TIM_SMCR_ETF_Pos) /*!< 0x00000100 */ +#define TIM_SMCR_ETF_1 (0x2U << TIM_SMCR_ETF_Pos) /*!< 0x00000200 */ +#define TIM_SMCR_ETF_2 (0x4U << TIM_SMCR_ETF_Pos) /*!< 0x00000400 */ +#define TIM_SMCR_ETF_3 (0x8U << TIM_SMCR_ETF_Pos) /*!< 0x00000800 */ + +#define TIM_SMCR_ETPS_Pos (12U) +#define TIM_SMCR_ETPS_Msk (0x3UL << TIM_SMCR_ETPS_Pos) /*!< 0x00003000 */ +#define TIM_SMCR_ETPS TIM_SMCR_ETPS_Msk /*!<ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 (0x1U << TIM_SMCR_ETPS_Pos) /*!< 0x00001000 */ +#define TIM_SMCR_ETPS_1 (0x2U << TIM_SMCR_ETPS_Pos) /*!< 0x00002000 */ + +#define TIM_SMCR_ECE_Pos (14U) +#define TIM_SMCR_ECE_Msk (0x1UL << TIM_SMCR_ECE_Pos) /*!< 0x00004000 */ +#define TIM_SMCR_ECE TIM_SMCR_ECE_Msk /*!<External clock enable */ +#define TIM_SMCR_ETP_Pos (15U) +#define TIM_SMCR_ETP_Msk (0x1UL << TIM_SMCR_ETP_Pos) /*!< 0x00008000 */ +#define TIM_SMCR_ETP TIM_SMCR_ETP_Msk /*!<External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE_Pos (0U) +#define TIM_DIER_UIE_Msk (0x1UL << TIM_DIER_UIE_Pos) /*!< 0x00000001 */ +#define TIM_DIER_UIE TIM_DIER_UIE_Msk /*!<Update interrupt enable */ +#define TIM_DIER_CC1IE_Pos (1U) +#define TIM_DIER_CC1IE_Msk (0x1UL << TIM_DIER_CC1IE_Pos) /*!< 0x00000002 */ +#define TIM_DIER_CC1IE TIM_DIER_CC1IE_Msk /*!<Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE_Pos (2U) +#define TIM_DIER_CC2IE_Msk (0x1UL << TIM_DIER_CC2IE_Pos) /*!< 0x00000004 */ +#define TIM_DIER_CC2IE TIM_DIER_CC2IE_Msk /*!<Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE_Pos (3U) +#define TIM_DIER_CC3IE_Msk (0x1UL << TIM_DIER_CC3IE_Pos) /*!< 0x00000008 */ +#define TIM_DIER_CC3IE TIM_DIER_CC3IE_Msk /*!<Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE_Pos (4U) +#define TIM_DIER_CC4IE_Msk (0x1UL << TIM_DIER_CC4IE_Pos) /*!< 0x00000010 */ +#define TIM_DIER_CC4IE TIM_DIER_CC4IE_Msk /*!<Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE_Pos (5U) +#define TIM_DIER_COMIE_Msk (0x1UL << TIM_DIER_COMIE_Pos) /*!< 0x00000020 */ +#define TIM_DIER_COMIE TIM_DIER_COMIE_Msk /*!<COM interrupt enable */ +#define TIM_DIER_TIE_Pos (6U) +#define TIM_DIER_TIE_Msk (0x1UL << TIM_DIER_TIE_Pos) /*!< 0x00000040 */ +#define TIM_DIER_TIE TIM_DIER_TIE_Msk /*!<Trigger interrupt enable */ +#define TIM_DIER_BIE_Pos (7U) +#define TIM_DIER_BIE_Msk (0x1UL << TIM_DIER_BIE_Pos) /*!< 0x00000080 */ +#define TIM_DIER_BIE TIM_DIER_BIE_Msk /*!<Break interrupt enable */ +#define TIM_DIER_UDE_Pos (8U) +#define TIM_DIER_UDE_Msk (0x1UL << TIM_DIER_UDE_Pos) /*!< 0x00000100 */ +#define TIM_DIER_UDE TIM_DIER_UDE_Msk /*!<Update DMA request enable */ +#define TIM_DIER_CC1DE_Pos (9U) +#define TIM_DIER_CC1DE_Msk (0x1UL << TIM_DIER_CC1DE_Pos) /*!< 0x00000200 */ +#define TIM_DIER_CC1DE TIM_DIER_CC1DE_Msk /*!<Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE_Pos (10U) +#define TIM_DIER_CC2DE_Msk (0x1UL << TIM_DIER_CC2DE_Pos) /*!< 0x00000400 */ +#define TIM_DIER_CC2DE TIM_DIER_CC2DE_Msk /*!<Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE_Pos (11U) +#define TIM_DIER_CC3DE_Msk (0x1UL << TIM_DIER_CC3DE_Pos) /*!< 0x00000800 */ +#define TIM_DIER_CC3DE TIM_DIER_CC3DE_Msk /*!<Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE_Pos (12U) +#define TIM_DIER_CC4DE_Msk (0x1UL << TIM_DIER_CC4DE_Pos) /*!< 0x00001000 */ +#define TIM_DIER_CC4DE TIM_DIER_CC4DE_Msk /*!<Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE_Pos (13U) +#define TIM_DIER_COMDE_Msk (0x1UL << TIM_DIER_COMDE_Pos) /*!< 0x00002000 */ +#define TIM_DIER_COMDE TIM_DIER_COMDE_Msk /*!<COM DMA request enable */ +#define TIM_DIER_TDE_Pos (14U) +#define TIM_DIER_TDE_Msk (0x1UL << TIM_DIER_TDE_Pos) /*!< 0x00004000 */ +#define TIM_DIER_TDE TIM_DIER_TDE_Msk /*!<Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF_Pos (0U) +#define TIM_SR_UIF_Msk (0x1UL << TIM_SR_UIF_Pos) /*!< 0x00000001 */ +#define TIM_SR_UIF TIM_SR_UIF_Msk /*!<Update interrupt Flag */ +#define TIM_SR_CC1IF_Pos (1U) +#define TIM_SR_CC1IF_Msk (0x1UL << TIM_SR_CC1IF_Pos) /*!< 0x00000002 */ +#define TIM_SR_CC1IF TIM_SR_CC1IF_Msk /*!<Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF_Pos (2U) +#define TIM_SR_CC2IF_Msk (0x1UL << TIM_SR_CC2IF_Pos) /*!< 0x00000004 */ +#define TIM_SR_CC2IF TIM_SR_CC2IF_Msk /*!<Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF_Pos (3U) +#define TIM_SR_CC3IF_Msk (0x1UL << TIM_SR_CC3IF_Pos) /*!< 0x00000008 */ +#define TIM_SR_CC3IF TIM_SR_CC3IF_Msk /*!<Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF_Pos (4U) +#define TIM_SR_CC4IF_Msk (0x1UL << TIM_SR_CC4IF_Pos) /*!< 0x00000010 */ +#define TIM_SR_CC4IF TIM_SR_CC4IF_Msk /*!<Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF_Pos (5U) +#define TIM_SR_COMIF_Msk (0x1UL << TIM_SR_COMIF_Pos) /*!< 0x00000020 */ +#define TIM_SR_COMIF TIM_SR_COMIF_Msk /*!<COM interrupt Flag */ +#define TIM_SR_TIF_Pos (6U) +#define TIM_SR_TIF_Msk (0x1UL << TIM_SR_TIF_Pos) /*!< 0x00000040 */ +#define TIM_SR_TIF TIM_SR_TIF_Msk /*!<Trigger interrupt Flag */ +#define TIM_SR_BIF_Pos (7U) +#define TIM_SR_BIF_Msk (0x1UL << TIM_SR_BIF_Pos) /*!< 0x00000080 */ +#define TIM_SR_BIF TIM_SR_BIF_Msk /*!<Break interrupt Flag */ +#define TIM_SR_B2IF_Pos (8U) +#define TIM_SR_B2IF_Msk (0x1UL << TIM_SR_B2IF_Pos) /*!< 0x00000100 */ +#define TIM_SR_B2IF TIM_SR_B2IF_Msk /*!<Break 2 interrupt Flag */ +#define TIM_SR_CC1OF_Pos (9U) +#define TIM_SR_CC1OF_Msk (0x1UL << TIM_SR_CC1OF_Pos) /*!< 0x00000200 */ +#define TIM_SR_CC1OF TIM_SR_CC1OF_Msk /*!<Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF_Pos (10U) +#define TIM_SR_CC2OF_Msk (0x1UL << TIM_SR_CC2OF_Pos) /*!< 0x00000400 */ +#define TIM_SR_CC2OF TIM_SR_CC2OF_Msk /*!<Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF_Pos (11U) +#define TIM_SR_CC3OF_Msk (0x1UL << TIM_SR_CC3OF_Pos) /*!< 0x00000800 */ +#define TIM_SR_CC3OF TIM_SR_CC3OF_Msk /*!<Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF_Pos (12U) +#define TIM_SR_CC4OF_Msk (0x1UL << TIM_SR_CC4OF_Pos) /*!< 0x00001000 */ +#define TIM_SR_CC4OF TIM_SR_CC4OF_Msk /*!<Capture/Compare 4 Overcapture Flag */ +#define TIM_SR_SBIF_Pos (13U) +#define TIM_SR_SBIF_Msk (0x1UL << TIM_SR_SBIF_Pos) /*!< 0x00002000 */ +#define TIM_SR_SBIF TIM_SR_SBIF_Msk /*!<System Break interrupt Flag */ +#define TIM_SR_CC5IF_Pos (16U) +#define TIM_SR_CC5IF_Msk (0x1UL << TIM_SR_CC5IF_Pos) /*!< 0x00010000 */ +#define TIM_SR_CC5IF TIM_SR_CC5IF_Msk /*!<Capture/Compare 5 interrupt Flag */ +#define TIM_SR_CC6IF_Pos (17U) +#define TIM_SR_CC6IF_Msk (0x1UL << TIM_SR_CC6IF_Pos) /*!< 0x00020000 */ +#define TIM_SR_CC6IF TIM_SR_CC6IF_Msk /*!<Capture/Compare 6 interrupt Flag */ + + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG_Pos (0U) +#define TIM_EGR_UG_Msk (0x1UL << TIM_EGR_UG_Pos) /*!< 0x00000001 */ +#define TIM_EGR_UG TIM_EGR_UG_Msk /*!<Update Generation */ +#define TIM_EGR_CC1G_Pos (1U) +#define TIM_EGR_CC1G_Msk (0x1UL << TIM_EGR_CC1G_Pos) /*!< 0x00000002 */ +#define TIM_EGR_CC1G TIM_EGR_CC1G_Msk /*!<Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G_Pos (2U) +#define TIM_EGR_CC2G_Msk (0x1UL << TIM_EGR_CC2G_Pos) /*!< 0x00000004 */ +#define TIM_EGR_CC2G TIM_EGR_CC2G_Msk /*!<Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G_Pos (3U) +#define TIM_EGR_CC3G_Msk (0x1UL << TIM_EGR_CC3G_Pos) /*!< 0x00000008 */ +#define TIM_EGR_CC3G TIM_EGR_CC3G_Msk /*!<Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G_Pos (4U) +#define TIM_EGR_CC4G_Msk (0x1UL << TIM_EGR_CC4G_Pos) /*!< 0x00000010 */ +#define TIM_EGR_CC4G TIM_EGR_CC4G_Msk /*!<Capture/Compare 4 Generation */ +#define TIM_EGR_COMG_Pos (5U) +#define TIM_EGR_COMG_Msk (0x1UL << TIM_EGR_COMG_Pos) /*!< 0x00000020 */ +#define TIM_EGR_COMG TIM_EGR_COMG_Msk /*!<Capture/Compare Control Update Generation */ +#define TIM_EGR_TG_Pos (6U) +#define TIM_EGR_TG_Msk (0x1UL << TIM_EGR_TG_Pos) /*!< 0x00000040 */ +#define TIM_EGR_TG TIM_EGR_TG_Msk /*!<Trigger Generation */ +#define TIM_EGR_BG_Pos (7U) +#define TIM_EGR_BG_Msk (0x1UL << TIM_EGR_BG_Pos) /*!< 0x00000080 */ +#define TIM_EGR_BG TIM_EGR_BG_Msk /*!<Break Generation */ +#define TIM_EGR_B2G_Pos (8U) +#define TIM_EGR_B2G_Msk (0x1UL << TIM_EGR_B2G_Pos) /*!< 0x00000100 */ +#define TIM_EGR_B2G TIM_EGR_B2G_Msk /*!<Break 2 Generation */ + + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S_Pos (0U) +#define TIM_CCMR1_CC1S_Msk (0x3UL << TIM_CCMR1_CC1S_Pos) /*!< 0x00000003 */ +#define TIM_CCMR1_CC1S TIM_CCMR1_CC1S_Msk /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 (0x1U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000001 */ +#define TIM_CCMR1_CC1S_1 (0x2U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000002 */ + +#define TIM_CCMR1_OC1FE_Pos (2U) +#define TIM_CCMR1_OC1FE_Msk (0x1UL << TIM_CCMR1_OC1FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR1_OC1FE TIM_CCMR1_OC1FE_Msk /*!<Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE_Pos (3U) +#define TIM_CCMR1_OC1PE_Msk (0x1UL << TIM_CCMR1_OC1PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR1_OC1PE TIM_CCMR1_OC1PE_Msk /*!<Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M_Pos (4U) +#define TIM_CCMR1_OC1M_Msk (0x1007UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR1_OC1M TIM_CCMR1_OC1M_Msk /*!<OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 (0x0001U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR1_OC1M_1 (0x0002U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR1_OC1M_2 (0x0004U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR1_OC1M_3 (0x1000U << TIM_CCMR1_OC1M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR1_OC1CE_Pos (7U) +#define TIM_CCMR1_OC1CE_Msk (0x1UL << TIM_CCMR1_OC1CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR1_OC1CE TIM_CCMR1_OC1CE_Msk /*!<Output Compare 1 Clear Enable */ + +#define TIM_CCMR1_CC2S_Pos (8U) +#define TIM_CCMR1_CC2S_Msk (0x3UL << TIM_CCMR1_CC2S_Pos) /*!< 0x00000300 */ +#define TIM_CCMR1_CC2S TIM_CCMR1_CC2S_Msk /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 (0x1U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000100 */ +#define TIM_CCMR1_CC2S_1 (0x2U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000200 */ + +#define TIM_CCMR1_OC2FE_Pos (10U) +#define TIM_CCMR1_OC2FE_Msk (0x1UL << TIM_CCMR1_OC2FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR1_OC2FE TIM_CCMR1_OC2FE_Msk /*!<Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE_Pos (11U) +#define TIM_CCMR1_OC2PE_Msk (0x1UL << TIM_CCMR1_OC2PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR1_OC2PE TIM_CCMR1_OC2PE_Msk /*!<Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M_Pos (12U) +#define TIM_CCMR1_OC2M_Msk (0x1007UL << TIM_CCMR1_OC2M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR1_OC2M TIM_CCMR1_OC2M_Msk /*!<OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 (0x0001U << TIM_CCMR1_OC2M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR1_OC2M_1 (0x0002U << TIM_CCMR1_OC2M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR1_OC2M_2 (0x0004U << TIM_CCMR1_OC2M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR1_OC2M_3 (0x1000U << TIM_CCMR1_OC2M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR1_OC2CE_Pos (15U) +#define TIM_CCMR1_OC2CE_Msk (0x1UL << TIM_CCMR1_OC2CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR1_OC2CE TIM_CCMR1_OC2CE_Msk /*!<Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ +#define TIM_CCMR1_IC1PSC_Pos (2U) +#define TIM_CCMR1_IC1PSC_Msk (0x3UL << TIM_CCMR1_IC1PSC_Pos) /*!< 0x0000000C */ +#define TIM_CCMR1_IC1PSC TIM_CCMR1_IC1PSC_Msk /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 (0x1U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000004 */ +#define TIM_CCMR1_IC1PSC_1 (0x2U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000008 */ + +#define TIM_CCMR1_IC1F_Pos (4U) +#define TIM_CCMR1_IC1F_Msk (0xFUL << TIM_CCMR1_IC1F_Pos) /*!< 0x000000F0 */ +#define TIM_CCMR1_IC1F TIM_CCMR1_IC1F_Msk /*!<IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 (0x1U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000010 */ +#define TIM_CCMR1_IC1F_1 (0x2U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000020 */ +#define TIM_CCMR1_IC1F_2 (0x4U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000040 */ +#define TIM_CCMR1_IC1F_3 (0x8U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000080 */ + +#define TIM_CCMR1_IC2PSC_Pos (10U) +#define TIM_CCMR1_IC2PSC_Msk (0x3UL << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000C00 */ +#define TIM_CCMR1_IC2PSC TIM_CCMR1_IC2PSC_Msk /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 (0x1U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000400 */ +#define TIM_CCMR1_IC2PSC_1 (0x2U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000800 */ + +#define TIM_CCMR1_IC2F_Pos (12U) +#define TIM_CCMR1_IC2F_Msk (0xFUL << TIM_CCMR1_IC2F_Pos) /*!< 0x0000F000 */ +#define TIM_CCMR1_IC2F TIM_CCMR1_IC2F_Msk /*!<IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 (0x1U << TIM_CCMR1_IC2F_Pos) /*!< 0x00001000 */ +#define TIM_CCMR1_IC2F_1 (0x2U << TIM_CCMR1_IC2F_Pos) /*!< 0x00002000 */ +#define TIM_CCMR1_IC2F_2 (0x4U << TIM_CCMR1_IC2F_Pos) /*!< 0x00004000 */ +#define TIM_CCMR1_IC2F_3 (0x8U << TIM_CCMR1_IC2F_Pos) /*!< 0x00008000 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S_Pos (0U) +#define TIM_CCMR2_CC3S_Msk (0x3UL << TIM_CCMR2_CC3S_Pos) /*!< 0x00000003 */ +#define TIM_CCMR2_CC3S TIM_CCMR2_CC3S_Msk /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 (0x1U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000001 */ +#define TIM_CCMR2_CC3S_1 (0x2U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000002 */ + +#define TIM_CCMR2_OC3FE_Pos (2U) +#define TIM_CCMR2_OC3FE_Msk (0x1UL << TIM_CCMR2_OC3FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR2_OC3FE TIM_CCMR2_OC3FE_Msk /*!<Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE_Pos (3U) +#define TIM_CCMR2_OC3PE_Msk (0x1UL << TIM_CCMR2_OC3PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR2_OC3PE TIM_CCMR2_OC3PE_Msk /*!<Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M_Pos (4U) +#define TIM_CCMR2_OC3M_Msk (0x1007UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR2_OC3M TIM_CCMR2_OC3M_Msk /*!<OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 (0x0001U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR2_OC3M_1 (0x0002U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR2_OC3M_2 (0x0004U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR2_OC3M_3 (0x1000U << TIM_CCMR2_OC3M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR2_OC3CE_Pos (7U) +#define TIM_CCMR2_OC3CE_Msk (0x1UL << TIM_CCMR2_OC3CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR2_OC3CE TIM_CCMR2_OC3CE_Msk /*!<Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S_Pos (8U) +#define TIM_CCMR2_CC4S_Msk (0x3UL << TIM_CCMR2_CC4S_Pos) /*!< 0x00000300 */ +#define TIM_CCMR2_CC4S TIM_CCMR2_CC4S_Msk /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 (0x1U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000100 */ +#define TIM_CCMR2_CC4S_1 (0x2U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000200 */ + +#define TIM_CCMR2_OC4FE_Pos (10U) +#define TIM_CCMR2_OC4FE_Msk (0x1UL << TIM_CCMR2_OC4FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR2_OC4FE TIM_CCMR2_OC4FE_Msk /*!<Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE_Pos (11U) +#define TIM_CCMR2_OC4PE_Msk (0x1UL << TIM_CCMR2_OC4PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR2_OC4PE TIM_CCMR2_OC4PE_Msk /*!<Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M_Pos (12U) +#define TIM_CCMR2_OC4M_Msk (0x1007UL << TIM_CCMR2_OC4M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR2_OC4M TIM_CCMR2_OC4M_Msk /*!<OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 (0x0001U << TIM_CCMR2_OC4M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR2_OC4M_1 (0x0002U << TIM_CCMR2_OC4M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR2_OC4M_2 (0x0004U << TIM_CCMR2_OC4M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR2_OC4M_3 (0x1000U << TIM_CCMR2_OC4M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR2_OC4CE_Pos (15U) +#define TIM_CCMR2_OC4CE_Msk (0x1UL << TIM_CCMR2_OC4CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR2_OC4CE TIM_CCMR2_OC4CE_Msk /*!<Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ +#define TIM_CCMR2_IC3PSC_Pos (2U) +#define TIM_CCMR2_IC3PSC_Msk (0x3UL << TIM_CCMR2_IC3PSC_Pos) /*!< 0x0000000C */ +#define TIM_CCMR2_IC3PSC TIM_CCMR2_IC3PSC_Msk /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 (0x1U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000004 */ +#define TIM_CCMR2_IC3PSC_1 (0x2U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000008 */ + +#define TIM_CCMR2_IC3F_Pos (4U) +#define TIM_CCMR2_IC3F_Msk (0xFUL << TIM_CCMR2_IC3F_Pos) /*!< 0x000000F0 */ +#define TIM_CCMR2_IC3F TIM_CCMR2_IC3F_Msk /*!<IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 (0x1U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000010 */ +#define TIM_CCMR2_IC3F_1 (0x2U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000020 */ +#define TIM_CCMR2_IC3F_2 (0x4U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000040 */ +#define TIM_CCMR2_IC3F_3 (0x8U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000080 */ + +#define TIM_CCMR2_IC4PSC_Pos (10U) +#define TIM_CCMR2_IC4PSC_Msk (0x3UL << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000C00 */ +#define TIM_CCMR2_IC4PSC TIM_CCMR2_IC4PSC_Msk /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 (0x1U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000400 */ +#define TIM_CCMR2_IC4PSC_1 (0x2U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000800 */ + +#define TIM_CCMR2_IC4F_Pos (12U) +#define TIM_CCMR2_IC4F_Msk (0xFUL << TIM_CCMR2_IC4F_Pos) /*!< 0x0000F000 */ +#define TIM_CCMR2_IC4F TIM_CCMR2_IC4F_Msk /*!<IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 (0x1U << TIM_CCMR2_IC4F_Pos) /*!< 0x00001000 */ +#define TIM_CCMR2_IC4F_1 (0x2U << TIM_CCMR2_IC4F_Pos) /*!< 0x00002000 */ +#define TIM_CCMR2_IC4F_2 (0x4U << TIM_CCMR2_IC4F_Pos) /*!< 0x00004000 */ +#define TIM_CCMR2_IC4F_3 (0x8U << TIM_CCMR2_IC4F_Pos) /*!< 0x00008000 */ + +/****************** Bit definition for TIM_CCMR3 register *******************/ +#define TIM_CCMR3_OC5FE_Pos (2U) +#define TIM_CCMR3_OC5FE_Msk (0x1UL << TIM_CCMR3_OC5FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR3_OC5FE TIM_CCMR3_OC5FE_Msk /*!<Output Compare 5 Fast enable */ +#define TIM_CCMR3_OC5PE_Pos (3U) +#define TIM_CCMR3_OC5PE_Msk (0x1UL << TIM_CCMR3_OC5PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR3_OC5PE TIM_CCMR3_OC5PE_Msk /*!<Output Compare 5 Preload enable */ + +#define TIM_CCMR3_OC5M_Pos (4U) +#define TIM_CCMR3_OC5M_Msk (0x1007UL << TIM_CCMR3_OC5M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR3_OC5M TIM_CCMR3_OC5M_Msk /*!<OC5M[3:0] bits (Output Compare 5 Mode) */ +#define TIM_CCMR3_OC5M_0 (0x0001U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR3_OC5M_1 (0x0002U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR3_OC5M_2 (0x0004U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR3_OC5M_3 (0x1000U << TIM_CCMR3_OC5M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR3_OC5CE_Pos (7U) +#define TIM_CCMR3_OC5CE_Msk (0x1UL << TIM_CCMR3_OC5CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR3_OC5CE TIM_CCMR3_OC5CE_Msk /*!<Output Compare 5 Clear Enable */ + +#define TIM_CCMR3_OC6FE_Pos (10U) +#define TIM_CCMR3_OC6FE_Msk (0x1UL << TIM_CCMR3_OC6FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR3_OC6FE TIM_CCMR3_OC6FE_Msk /*!<Output Compare 6 Fast enable */ +#define TIM_CCMR3_OC6PE_Pos (11U) +#define TIM_CCMR3_OC6PE_Msk (0x1UL << TIM_CCMR3_OC6PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR3_OC6PE TIM_CCMR3_OC6PE_Msk /*!<Output Compare 6 Preload enable */ + +#define TIM_CCMR3_OC6M_Pos (12U) +#define TIM_CCMR3_OC6M_Msk (0x1007UL << TIM_CCMR3_OC6M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR3_OC6M TIM_CCMR3_OC6M_Msk /*!<OC6M[3:0] bits (Output Compare 6 Mode) */ +#define TIM_CCMR3_OC6M_0 (0x0001U << TIM_CCMR3_OC6M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR3_OC6M_1 (0x0002U << TIM_CCMR3_OC6M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR3_OC6M_2 (0x0004U << TIM_CCMR3_OC6M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR3_OC6M_3 (0x1000U << TIM_CCMR3_OC6M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR3_OC6CE_Pos (15U) +#define TIM_CCMR3_OC6CE_Msk (0x1UL << TIM_CCMR3_OC6CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR3_OC6CE TIM_CCMR3_OC6CE_Msk /*!<Output Compare 6 Clear Enable */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E_Pos (0U) +#define TIM_CCER_CC1E_Msk (0x1UL << TIM_CCER_CC1E_Pos) /*!< 0x00000001 */ +#define TIM_CCER_CC1E TIM_CCER_CC1E_Msk /*!<Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P_Pos (1U) +#define TIM_CCER_CC1P_Msk (0x1UL << TIM_CCER_CC1P_Pos) /*!< 0x00000002 */ +#define TIM_CCER_CC1P TIM_CCER_CC1P_Msk /*!<Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE_Pos (2U) +#define TIM_CCER_CC1NE_Msk (0x1UL << TIM_CCER_CC1NE_Pos) /*!< 0x00000004 */ +#define TIM_CCER_CC1NE TIM_CCER_CC1NE_Msk /*!<Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP_Pos (3U) +#define TIM_CCER_CC1NP_Msk (0x1UL << TIM_CCER_CC1NP_Pos) /*!< 0x00000008 */ +#define TIM_CCER_CC1NP TIM_CCER_CC1NP_Msk /*!<Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E_Pos (4U) +#define TIM_CCER_CC2E_Msk (0x1UL << TIM_CCER_CC2E_Pos) /*!< 0x00000010 */ +#define TIM_CCER_CC2E TIM_CCER_CC2E_Msk /*!<Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P_Pos (5U) +#define TIM_CCER_CC2P_Msk (0x1UL << TIM_CCER_CC2P_Pos) /*!< 0x00000020 */ +#define TIM_CCER_CC2P TIM_CCER_CC2P_Msk /*!<Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE_Pos (6U) +#define TIM_CCER_CC2NE_Msk (0x1UL << TIM_CCER_CC2NE_Pos) /*!< 0x00000040 */ +#define TIM_CCER_CC2NE TIM_CCER_CC2NE_Msk /*!<Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP_Pos (7U) +#define TIM_CCER_CC2NP_Msk (0x1UL << TIM_CCER_CC2NP_Pos) /*!< 0x00000080 */ +#define TIM_CCER_CC2NP TIM_CCER_CC2NP_Msk /*!<Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E_Pos (8U) +#define TIM_CCER_CC3E_Msk (0x1UL << TIM_CCER_CC3E_Pos) /*!< 0x00000100 */ +#define TIM_CCER_CC3E TIM_CCER_CC3E_Msk /*!<Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P_Pos (9U) +#define TIM_CCER_CC3P_Msk (0x1UL << TIM_CCER_CC3P_Pos) /*!< 0x00000200 */ +#define TIM_CCER_CC3P TIM_CCER_CC3P_Msk /*!<Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE_Pos (10U) +#define TIM_CCER_CC3NE_Msk (0x1UL << TIM_CCER_CC3NE_Pos) /*!< 0x00000400 */ +#define TIM_CCER_CC3NE TIM_CCER_CC3NE_Msk /*!<Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP_Pos (11U) +#define TIM_CCER_CC3NP_Msk (0x1UL << TIM_CCER_CC3NP_Pos) /*!< 0x00000800 */ +#define TIM_CCER_CC3NP TIM_CCER_CC3NP_Msk /*!<Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E_Pos (12U) +#define TIM_CCER_CC4E_Msk (0x1UL << TIM_CCER_CC4E_Pos) /*!< 0x00001000 */ +#define TIM_CCER_CC4E TIM_CCER_CC4E_Msk /*!<Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P_Pos (13U) +#define TIM_CCER_CC4P_Msk (0x1UL << TIM_CCER_CC4P_Pos) /*!< 0x00002000 */ +#define TIM_CCER_CC4P TIM_CCER_CC4P_Msk /*!<Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP_Pos (15U) +#define TIM_CCER_CC4NP_Msk (0x1UL << TIM_CCER_CC4NP_Pos) /*!< 0x00008000 */ +#define TIM_CCER_CC4NP TIM_CCER_CC4NP_Msk /*!<Capture/Compare 4 Complementary output Polarity */ +#define TIM_CCER_CC5E_Pos (16U) +#define TIM_CCER_CC5E_Msk (0x1UL << TIM_CCER_CC5E_Pos) /*!< 0x00010000 */ +#define TIM_CCER_CC5E TIM_CCER_CC5E_Msk /*!<Capture/Compare 5 output enable */ +#define TIM_CCER_CC5P_Pos (17U) +#define TIM_CCER_CC5P_Msk (0x1UL << TIM_CCER_CC5P_Pos) /*!< 0x00020000 */ +#define TIM_CCER_CC5P TIM_CCER_CC5P_Msk /*!<Capture/Compare 5 output Polarity */ +#define TIM_CCER_CC6E_Pos (20U) +#define TIM_CCER_CC6E_Msk (0x1UL << TIM_CCER_CC6E_Pos) /*!< 0x00100000 */ +#define TIM_CCER_CC6E TIM_CCER_CC6E_Msk /*!<Capture/Compare 6 output enable */ +#define TIM_CCER_CC6P_Pos (21U) +#define TIM_CCER_CC6P_Msk (0x1UL << TIM_CCER_CC6P_Pos) /*!< 0x00200000 */ +#define TIM_CCER_CC6P TIM_CCER_CC6P_Msk /*!<Capture/Compare 6 output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT_Pos (0U) +#define TIM_CNT_CNT_Msk (0xFFFFFFFFUL << TIM_CNT_CNT_Pos) /*!< 0xFFFFFFFF */ +#define TIM_CNT_CNT TIM_CNT_CNT_Msk /*!<Counter Value */ +#define TIM_CNT_UIFCPY_Pos (31U) +#define TIM_CNT_UIFCPY_Msk (0x1UL << TIM_CNT_UIFCPY_Pos) /*!< 0x80000000 */ +#define TIM_CNT_UIFCPY TIM_CNT_UIFCPY_Msk /*!<Update interrupt flag copy (if UIFREMAP=1) */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC_Pos (0U) +#define TIM_PSC_PSC_Msk (0xFFFFUL << TIM_PSC_PSC_Pos) /*!< 0x0000FFFF */ +#define TIM_PSC_PSC TIM_PSC_PSC_Msk /*!<Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR_Pos (0U) +#define TIM_ARR_ARR_Msk (0xFFFFFFFFUL << TIM_ARR_ARR_Pos) /*!< 0xFFFFFFFF */ +#define TIM_ARR_ARR TIM_ARR_ARR_Msk /*!<Actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP_Pos (0U) +#define TIM_RCR_REP_Msk (0xFFFFUL << TIM_RCR_REP_Pos) /*!< 0x0000FFFF */ +#define TIM_RCR_REP TIM_RCR_REP_Msk /*!<Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1_Pos (0U) +#define TIM_CCR1_CCR1_Msk (0xFFFFUL << TIM_CCR1_CCR1_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR1_CCR1 TIM_CCR1_CCR1_Msk /*!<Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2_Pos (0U) +#define TIM_CCR2_CCR2_Msk (0xFFFFUL << TIM_CCR2_CCR2_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR2_CCR2 TIM_CCR2_CCR2_Msk /*!<Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3_Pos (0U) +#define TIM_CCR3_CCR3_Msk (0xFFFFUL << TIM_CCR3_CCR3_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR3_CCR3 TIM_CCR3_CCR3_Msk /*!<Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4_Pos (0U) +#define TIM_CCR4_CCR4_Msk (0xFFFFUL << TIM_CCR4_CCR4_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR4_CCR4 TIM_CCR4_CCR4_Msk /*!<Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_CCR5 register *******************/ +#define TIM_CCR5_CCR5_Pos (0U) +#define TIM_CCR5_CCR5_Msk (0xFFFFFFFFUL << TIM_CCR5_CCR5_Pos) /*!< 0xFFFFFFFF */ +#define TIM_CCR5_CCR5 TIM_CCR5_CCR5_Msk /*!<Capture/Compare 5 Value */ +#define TIM_CCR5_GC5C1_Pos (29U) +#define TIM_CCR5_GC5C1_Msk (0x1UL << TIM_CCR5_GC5C1_Pos) /*!< 0x20000000 */ +#define TIM_CCR5_GC5C1 TIM_CCR5_GC5C1_Msk /*!<Group Channel 5 and Channel 1 */ +#define TIM_CCR5_GC5C2_Pos (30U) +#define TIM_CCR5_GC5C2_Msk (0x1UL << TIM_CCR5_GC5C2_Pos) /*!< 0x40000000 */ +#define TIM_CCR5_GC5C2 TIM_CCR5_GC5C2_Msk /*!<Group Channel 5 and Channel 2 */ +#define TIM_CCR5_GC5C3_Pos (31U) +#define TIM_CCR5_GC5C3_Msk (0x1UL << TIM_CCR5_GC5C3_Pos) /*!< 0x80000000 */ +#define TIM_CCR5_GC5C3 TIM_CCR5_GC5C3_Msk /*!<Group Channel 5 and Channel 3 */ + +/******************* Bit definition for TIM_CCR6 register *******************/ +#define TIM_CCR6_CCR6_Pos (0U) +#define TIM_CCR6_CCR6_Msk (0xFFFFUL << TIM_CCR6_CCR6_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR6_CCR6 TIM_CCR6_CCR6_Msk /*!<Capture/Compare 6 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG_Pos (0U) +#define TIM_BDTR_DTG_Msk (0xFFUL << TIM_BDTR_DTG_Pos) /*!< 0x000000FF */ +#define TIM_BDTR_DTG TIM_BDTR_DTG_Msk /*!<DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 (0x01U << TIM_BDTR_DTG_Pos) /*!< 0x00000001 */ +#define TIM_BDTR_DTG_1 (0x02U << TIM_BDTR_DTG_Pos) /*!< 0x00000002 */ +#define TIM_BDTR_DTG_2 (0x04U << TIM_BDTR_DTG_Pos) /*!< 0x00000004 */ +#define TIM_BDTR_DTG_3 (0x08U << TIM_BDTR_DTG_Pos) /*!< 0x00000008 */ +#define TIM_BDTR_DTG_4 (0x10U << TIM_BDTR_DTG_Pos) /*!< 0x00000010 */ +#define TIM_BDTR_DTG_5 (0x20U << TIM_BDTR_DTG_Pos) /*!< 0x00000020 */ +#define TIM_BDTR_DTG_6 (0x40U << TIM_BDTR_DTG_Pos) /*!< 0x00000040 */ +#define TIM_BDTR_DTG_7 (0x80U << TIM_BDTR_DTG_Pos) /*!< 0x00000080 */ + +#define TIM_BDTR_LOCK_Pos (8U) +#define TIM_BDTR_LOCK_Msk (0x3UL << TIM_BDTR_LOCK_Pos) /*!< 0x00000300 */ +#define TIM_BDTR_LOCK TIM_BDTR_LOCK_Msk /*!<LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 (0x1U << TIM_BDTR_LOCK_Pos) /*!< 0x00000100 */ +#define TIM_BDTR_LOCK_1 (0x2U << TIM_BDTR_LOCK_Pos) /*!< 0x00000200 */ + +#define TIM_BDTR_OSSI_Pos (10U) +#define TIM_BDTR_OSSI_Msk (0x1UL << TIM_BDTR_OSSI_Pos) /*!< 0x00000400 */ +#define TIM_BDTR_OSSI TIM_BDTR_OSSI_Msk /*!<Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR_Pos (11U) +#define TIM_BDTR_OSSR_Msk (0x1UL << TIM_BDTR_OSSR_Pos) /*!< 0x00000800 */ +#define TIM_BDTR_OSSR TIM_BDTR_OSSR_Msk /*!<Off-State Selection for Run mode */ +#define TIM_BDTR_BKE_Pos (12U) +#define TIM_BDTR_BKE_Msk (0x1UL << TIM_BDTR_BKE_Pos) /*!< 0x00001000 */ +#define TIM_BDTR_BKE TIM_BDTR_BKE_Msk /*!<Break enable for Break 1 */ +#define TIM_BDTR_BKP_Pos (13U) +#define TIM_BDTR_BKP_Msk (0x1UL << TIM_BDTR_BKP_Pos) /*!< 0x00002000 */ +#define TIM_BDTR_BKP TIM_BDTR_BKP_Msk /*!<Break Polarity for Break 1 */ +#define TIM_BDTR_AOE_Pos (14U) +#define TIM_BDTR_AOE_Msk (0x1UL << TIM_BDTR_AOE_Pos) /*!< 0x00004000 */ +#define TIM_BDTR_AOE TIM_BDTR_AOE_Msk /*!<Automatic Output enable */ +#define TIM_BDTR_MOE_Pos (15U) +#define TIM_BDTR_MOE_Msk (0x1UL << TIM_BDTR_MOE_Pos) /*!< 0x00008000 */ +#define TIM_BDTR_MOE TIM_BDTR_MOE_Msk /*!<Main Output enable */ + +#define TIM_BDTR_BKF_Pos (16U) +#define TIM_BDTR_BKF_Msk (0xFUL << TIM_BDTR_BKF_Pos) /*!< 0x000F0000 */ +#define TIM_BDTR_BKF TIM_BDTR_BKF_Msk /*!<Break Filter for Break 1 */ +#define TIM_BDTR_BK2F_Pos (20U) +#define TIM_BDTR_BK2F_Msk (0xFUL << TIM_BDTR_BK2F_Pos) /*!< 0x00F00000 */ +#define TIM_BDTR_BK2F TIM_BDTR_BK2F_Msk /*!<Break Filter for Break 2 */ + +#define TIM_BDTR_BK2E_Pos (24U) +#define TIM_BDTR_BK2E_Msk (0x1UL << TIM_BDTR_BK2E_Pos) /*!< 0x01000000 */ +#define TIM_BDTR_BK2E TIM_BDTR_BK2E_Msk /*!<Break enable for Break 2 */ +#define TIM_BDTR_BK2P_Pos (25U) +#define TIM_BDTR_BK2P_Msk (0x1UL << TIM_BDTR_BK2P_Pos) /*!< 0x02000000 */ +#define TIM_BDTR_BK2P TIM_BDTR_BK2P_Msk /*!<Break Polarity for Break 2 */ + +#define TIM_BDTR_BKDSRM_Pos (26U) +#define TIM_BDTR_BKDSRM_Msk (0x1UL << TIM_BDTR_BKDSRM_Pos) /*!< 0x04000000 */ +#define TIM_BDTR_BKDSRM TIM_BDTR_BKDSRM_Msk /*!<Break disarming/re-arming */ +#define TIM_BDTR_BK2DSRM_Pos (27U) +#define TIM_BDTR_BK2DSRM_Msk (0x1UL << TIM_BDTR_BK2DSRM_Pos) /*!< 0x08000000 */ +#define TIM_BDTR_BK2DSRM TIM_BDTR_BK2DSRM_Msk /*!<Break2 disarming/re-arming */ + +#define TIM_BDTR_BKBID_Pos (28U) +#define TIM_BDTR_BKBID_Msk (0x1UL << TIM_BDTR_BKBID_Pos) /*!< 0x10000000 */ +#define TIM_BDTR_BKBID TIM_BDTR_BKBID_Msk /*!<Break BIDirectional */ +#define TIM_BDTR_BK2BID_Pos (29U) +#define TIM_BDTR_BK2BID_Msk (0x1UL << TIM_BDTR_BK2BID_Pos) /*!< 0x20000000 */ +#define TIM_BDTR_BK2BID TIM_BDTR_BK2BID_Msk /*!<Break2 BIDirectional */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA_Pos (0U) +#define TIM_DCR_DBA_Msk (0x1FUL << TIM_DCR_DBA_Pos) /*!< 0x0000001F */ +#define TIM_DCR_DBA TIM_DCR_DBA_Msk /*!<DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 (0x01U << TIM_DCR_DBA_Pos) /*!< 0x00000001 */ +#define TIM_DCR_DBA_1 (0x02U << TIM_DCR_DBA_Pos) /*!< 0x00000002 */ +#define TIM_DCR_DBA_2 (0x04U << TIM_DCR_DBA_Pos) /*!< 0x00000004 */ +#define TIM_DCR_DBA_3 (0x08U << TIM_DCR_DBA_Pos) /*!< 0x00000008 */ +#define TIM_DCR_DBA_4 (0x10U << TIM_DCR_DBA_Pos) /*!< 0x00000010 */ + +#define TIM_DCR_DBL_Pos (8U) +#define TIM_DCR_DBL_Msk (0x1FUL << TIM_DCR_DBL_Pos) /*!< 0x00001F00 */ +#define TIM_DCR_DBL TIM_DCR_DBL_Msk /*!<DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 (0x01U << TIM_DCR_DBL_Pos) /*!< 0x00000100 */ +#define TIM_DCR_DBL_1 (0x02U << TIM_DCR_DBL_Pos) /*!< 0x00000200 */ +#define TIM_DCR_DBL_2 (0x04U << TIM_DCR_DBL_Pos) /*!< 0x00000400 */ +#define TIM_DCR_DBL_3 (0x08U << TIM_DCR_DBL_Pos) /*!< 0x00000800 */ +#define TIM_DCR_DBL_4 (0x10U << TIM_DCR_DBL_Pos) /*!< 0x00001000 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB_Pos (0U) +#define TIM_DMAR_DMAB_Msk (0xFFFFUL << TIM_DMAR_DMAB_Pos) /*!< 0x0000FFFF */ +#define TIM_DMAR_DMAB TIM_DMAR_DMAB_Msk /*!<DMA register for burst accesses */ + +/******************* Bit definition for TIM1_OR register *******************/ +#define TIM1_OR_ETR_ADC1_RMP_Pos (0U) +#define TIM1_OR_ETR_ADC1_RMP_Msk (0x3UL << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000003 */ +#define TIM1_OR_ETR_ADC1_RMP TIM1_OR_ETR_ADC1_RMP_Msk /*!< TIM1_ETR_ADC1 remapping capability*/ +#define TIM1_OR_ETR_ADC1_RMP_0 (0x1U << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000001 */ +#define TIM1_OR_ETR_ADC1_RMP_1 (0x2U << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000002 */ +#define TIM1_OR_TI1_RMP_Pos (4U) +#define TIM1_OR_TI1_RMP_Msk (0x1UL << TIM1_OR_TI1_RMP_Pos) /*!< 0x00000010 */ +#define TIM1_OR_TI1_RMP TIM1_OR_TI1_RMP_Msk /*!< Input Capture 1 remap*/ + +/******************* Bit definition for TIM2_OR register *******************/ +#define TIM2_OR_TI4_RMP_Pos (2U) +#define TIM2_OR_TI4_RMP_Msk (0x3UL << TIM2_OR_TI4_RMP_Pos) /*!< 0x0000000C */ +#define TIM2_OR_TI4_RMP TIM2_OR_TI4_RMP_Msk /*!< TI4 Input capture 4 remap*/ +#define TIM2_OR_TI4_RMP_0 (0x1U << TIM2_OR_TI4_RMP_Pos) /*!< 0x00000004 */ +#define TIM2_OR_ETR_RMP_Pos (1U) +#define TIM2_OR_ETR_RMP_Msk (0x1UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000002 */ +#define TIM2_OR_ETR_RMP TIM2_OR_ETR_RMP_Msk /*!< External trigger remap*/ + +/******************* Bit definition for TIM1_AF1 register *******************/ +#define TIM1_AF1_BKINE_Pos (0U) +#define TIM1_AF1_BKINE_Msk (0x1UL << TIM1_AF1_BKINE_Pos) /*!< 0x00000001 */ +#define TIM1_AF1_BKINE TIM1_AF1_BKINE_Msk /*!<BRK BKIN input enable */ +#define TIM1_AF1_BKCMP1E_Pos (1U) +#define TIM1_AF1_BKCMP1E_Msk (0x1UL << TIM1_AF1_BKCMP1E_Pos) /*!< 0x00000002 */ +#define TIM1_AF1_BKCMP1E TIM1_AF1_BKCMP1E_Msk /*!<BRK COMP1 enable */ +#define TIM1_AF1_BKINP_Pos (9U) +#define TIM1_AF1_BKINP_Msk (0x1UL << TIM1_AF1_BKINP_Pos) /*!< 0x00000200 */ +#define TIM1_AF1_BKINP TIM1_AF1_BKINP_Msk /*!<BRK BKIN input polarity */ +#define TIM1_AF1_BKCMP1P_Pos (10U) +#define TIM1_AF1_BKCMP1P_Msk (0x1UL << TIM1_AF1_BKCMP1P_Pos) /*!< 0x00000400 */ +#define TIM1_AF1_BKCMP1P TIM1_AF1_BKCMP1P_Msk /*!<BRK COMP1 input polarity */ +#define TIM1_AF1_ETRSEL_Pos (14U) +#define TIM1_AF1_ETRSEL_Msk (0x7UL << TIM1_AF1_ETRSEL_Pos) /*!< 0x0001C000 */ +#define TIM1_AF1_ETRSEL TIM1_AF1_ETRSEL_Msk /*!<ETRSEL[2:0] bits (TIM1 ETR source selection) */ +#define TIM1_AF1_ETRSEL_0 (0x1U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00004000 */ +#define TIM1_AF1_ETRSEL_1 (0x2U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00008000 */ +#define TIM1_AF1_ETRSEL_2 (0x4U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00010000 */ + +/******************* Bit definition for TIM2_AF1 register *******************/ +#define TIM2_AF1_ETRSEL_Pos (14U) +#define TIM2_AF1_ETRSEL_Msk (0x7UL << TIM2_AF1_ETRSEL_Pos) /*!< 0x0001C000 */ +#define TIM2_AF1_ETRSEL (0x00001C000) /*!< External trigger source selection */ +#define TIM2_AF1_ETRSEL_0 (0x000004000) /*!< Bit_0 */ +#define TIM2_AF1_ETRSEL_1 (0x000008000) /*!< Bit_1 */ +#define TIM2_AF1_ETRSEL_2 (0x000010000) /*!< Bit_2 */ + +/******************* Bit definition for TIM17_AF1 register *******************/ +#define TIM17_AF1_BKINE_Pos (0U) +#define TIM17_AF1_BKINE_Msk (0x1UL << TIM17_AF1_BKINE_Pos) /*!< 0x00000001 */ +#define TIM17_AF1_BKINE TIM17_AF1_BKINE_Msk /*!<BRK BKIN input enable */ +#define TIM17_AF1_BKINP_Pos (9U) +#define TIM17_AF1_BKINP_Msk (0x1UL << TIM17_AF1_BKINP_Pos) /*!< 0x00000200 */ +#define TIM17_AF1_BKINP TIM17_AF1_BKINP_Msk /*!<BRK BKIN2 input polarity */ + +/******************* Bit definition for TIM1_AF2 register *******************/ +#define TIM1_AF2_BK2INE_Pos (0U) +#define TIM1_AF2_BK2INE_Msk (0x1UL << TIM1_AF2_BK2INE_Pos) /*!< 0x00000001 */ +#define TIM1_AF2_BK2INE TIM1_AF2_BK2INE_Msk /*!<BRK2 BKIN2 input enable */ +#define TIM1_AF2_BK2CMP1E_Pos (1U) +#define TIM1_AF2_BK2CMP1E_Msk (0x1UL << TIM1_AF2_BK2CMP1E_Pos) /*!< 0x00000002 */ +#define TIM1_AF2_BK2CMP1E TIM1_AF2_BK2CMP1E_Msk /*!<BRK2 COMP1 enable */ +#define TIM1_AF2_BK2INP_Pos (9U) +#define TIM1_AF2_BK2INP_Msk (0x1UL << TIM1_AF2_BK2INP_Pos) /*!< 0x00000200 */ +#define TIM1_AF2_BK2INP TIM1_AF2_BK2INP_Msk /*!<BRK2 BKIN2 input polarity */ +#define TIM1_AF2_BK2CMP1P_Pos (10U) +#define TIM1_AF2_BK2CMP1P_Msk (0x1UL << TIM1_AF2_BK2CMP1P_Pos) /*!< 0x00000400 */ +#define TIM1_AF2_BK2CMP1P TIM1_AF2_BK2CMP1P_Msk /*!<BRK2 COMP1 input polarity */ + +/******************************************************************************/ +/* */ +/* Low Power Timer (LPTIM) */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for LPTIM_ISR register *******************/ +#define LPTIM_ISR_CMPM_Pos (0U) +#define LPTIM_ISR_CMPM_Msk (0x1UL << LPTIM_ISR_CMPM_Pos) /*!< 0x00000001 */ +#define LPTIM_ISR_CMPM LPTIM_ISR_CMPM_Msk /*!< Compare match */ +#define LPTIM_ISR_ARRM_Pos (1U) +#define LPTIM_ISR_ARRM_Msk (0x1UL << LPTIM_ISR_ARRM_Pos) /*!< 0x00000002 */ +#define LPTIM_ISR_ARRM LPTIM_ISR_ARRM_Msk /*!< Autoreload match */ +#define LPTIM_ISR_EXTTRIG_Pos (2U) +#define LPTIM_ISR_EXTTRIG_Msk (0x1UL << LPTIM_ISR_EXTTRIG_Pos) /*!< 0x00000004 */ +#define LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG_Msk /*!< External trigger edge event */ +#define LPTIM_ISR_CMPOK_Pos (3U) +#define LPTIM_ISR_CMPOK_Msk (0x1UL << LPTIM_ISR_CMPOK_Pos) /*!< 0x00000008 */ +#define LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK_Msk /*!< Compare register update OK */ +#define LPTIM_ISR_ARROK_Pos (4U) +#define LPTIM_ISR_ARROK_Msk (0x1UL << LPTIM_ISR_ARROK_Pos) /*!< 0x00000010 */ +#define LPTIM_ISR_ARROK LPTIM_ISR_ARROK_Msk /*!< Autoreload register update OK */ +#define LPTIM_ISR_UP_Pos (5U) +#define LPTIM_ISR_UP_Msk (0x1UL << LPTIM_ISR_UP_Pos) /*!< 0x00000020 */ +#define LPTIM_ISR_UP LPTIM_ISR_UP_Msk /*!< Counter direction change down to up */ +#define LPTIM_ISR_DOWN_Pos (6U) +#define LPTIM_ISR_DOWN_Msk (0x1UL << LPTIM_ISR_DOWN_Pos) /*!< 0x00000040 */ +#define LPTIM_ISR_DOWN LPTIM_ISR_DOWN_Msk /*!< Counter direction change up to down */ + +/****************** Bit definition for LPTIM_ICR register *******************/ +#define LPTIM_ICR_CMPMCF_Pos (0U) +#define LPTIM_ICR_CMPMCF_Msk (0x1UL << LPTIM_ICR_CMPMCF_Pos) /*!< 0x00000001 */ +#define LPTIM_ICR_CMPMCF LPTIM_ICR_CMPMCF_Msk /*!< Compare match Clear Flag */ +#define LPTIM_ICR_ARRMCF_Pos (1U) +#define LPTIM_ICR_ARRMCF_Msk (0x1UL << LPTIM_ICR_ARRMCF_Pos) /*!< 0x00000002 */ +#define LPTIM_ICR_ARRMCF LPTIM_ICR_ARRMCF_Msk /*!< Autoreload match Clear Flag */ +#define LPTIM_ICR_EXTTRIGCF_Pos (2U) +#define LPTIM_ICR_EXTTRIGCF_Msk (0x1UL << LPTIM_ICR_EXTTRIGCF_Pos) /*!< 0x00000004 */ +#define LPTIM_ICR_EXTTRIGCF LPTIM_ICR_EXTTRIGCF_Msk /*!< External trigger edge event Clear Flag */ +#define LPTIM_ICR_CMPOKCF_Pos (3U) +#define LPTIM_ICR_CMPOKCF_Msk (0x1UL << LPTIM_ICR_CMPOKCF_Pos) /*!< 0x00000008 */ +#define LPTIM_ICR_CMPOKCF LPTIM_ICR_CMPOKCF_Msk /*!< Compare register update OK Clear Flag */ +#define LPTIM_ICR_ARROKCF_Pos (4U) +#define LPTIM_ICR_ARROKCF_Msk (0x1UL << LPTIM_ICR_ARROKCF_Pos) /*!< 0x00000010 */ +#define LPTIM_ICR_ARROKCF LPTIM_ICR_ARROKCF_Msk /*!< Autoreload register update OK Clear Flag */ +#define LPTIM_ICR_UPCF_Pos (5U) +#define LPTIM_ICR_UPCF_Msk (0x1UL << LPTIM_ICR_UPCF_Pos) /*!< 0x00000020 */ +#define LPTIM_ICR_UPCF LPTIM_ICR_UPCF_Msk /*!< Counter direction change down to up Clear Flag */ +#define LPTIM_ICR_DOWNCF_Pos (6U) +#define LPTIM_ICR_DOWNCF_Msk (0x1UL << LPTIM_ICR_DOWNCF_Pos) /*!< 0x00000040 */ +#define LPTIM_ICR_DOWNCF LPTIM_ICR_DOWNCF_Msk /*!< Counter direction change up to down Clear Flag */ + +/****************** Bit definition for LPTIM_IER register ********************/ +#define LPTIM_IER_CMPMIE_Pos (0U) +#define LPTIM_IER_CMPMIE_Msk (0x1UL << LPTIM_IER_CMPMIE_Pos) /*!< 0x00000001 */ +#define LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE_Msk /*!< Compare match Interrupt Enable */ +#define LPTIM_IER_ARRMIE_Pos (1U) +#define LPTIM_IER_ARRMIE_Msk (0x1UL << LPTIM_IER_ARRMIE_Pos) /*!< 0x00000002 */ +#define LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE_Msk /*!< Autoreload match Interrupt Enable */ +#define LPTIM_IER_EXTTRIGIE_Pos (2U) +#define LPTIM_IER_EXTTRIGIE_Msk (0x1UL << LPTIM_IER_EXTTRIGIE_Pos) /*!< 0x00000004 */ +#define LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE_Msk /*!< External trigger edge event Interrupt Enable */ +#define LPTIM_IER_CMPOKIE_Pos (3U) +#define LPTIM_IER_CMPOKIE_Msk (0x1UL << LPTIM_IER_CMPOKIE_Pos) /*!< 0x00000008 */ +#define LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE_Msk /*!< Compare register update OK Interrupt Enable */ +#define LPTIM_IER_ARROKIE_Pos (4U) +#define LPTIM_IER_ARROKIE_Msk (0x1UL << LPTIM_IER_ARROKIE_Pos) /*!< 0x00000010 */ +#define LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE_Msk /*!< Autoreload register update OK Interrupt Enable */ +#define LPTIM_IER_UPIE_Pos (5U) +#define LPTIM_IER_UPIE_Msk (0x1UL << LPTIM_IER_UPIE_Pos) /*!< 0x00000020 */ +#define LPTIM_IER_UPIE LPTIM_IER_UPIE_Msk /*!< Counter direction change down to up Interrupt Enable */ +#define LPTIM_IER_DOWNIE_Pos (6U) +#define LPTIM_IER_DOWNIE_Msk (0x1UL << LPTIM_IER_DOWNIE_Pos) /*!< 0x00000040 */ +#define LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE_Msk /*!< Counter direction change up to down Interrupt Enable */ + +/****************** Bit definition for LPTIM_CFGR register *******************/ +#define LPTIM_CFGR_CKSEL_Pos (0U) +#define LPTIM_CFGR_CKSEL_Msk (0x1UL << LPTIM_CFGR_CKSEL_Pos) /*!< 0x00000001 */ +#define LPTIM_CFGR_CKSEL LPTIM_CFGR_CKSEL_Msk /*!< Clock selector */ + +#define LPTIM_CFGR_CKPOL_Pos (1U) +#define LPTIM_CFGR_CKPOL_Msk (0x3UL << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000006 */ +#define LPTIM_CFGR_CKPOL LPTIM_CFGR_CKPOL_Msk /*!< CKPOL[1:0] bits (Clock polarity) */ +#define LPTIM_CFGR_CKPOL_0 (0x1U << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000002 */ +#define LPTIM_CFGR_CKPOL_1 (0x2U << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000004 */ + +#define LPTIM_CFGR_CKFLT_Pos (3U) +#define LPTIM_CFGR_CKFLT_Msk (0x3UL << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000018 */ +#define LPTIM_CFGR_CKFLT LPTIM_CFGR_CKFLT_Msk /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */ +#define LPTIM_CFGR_CKFLT_0 (0x1U << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000008 */ +#define LPTIM_CFGR_CKFLT_1 (0x2U << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000010 */ + +#define LPTIM_CFGR_TRGFLT_Pos (6U) +#define LPTIM_CFGR_TRGFLT_Msk (0x3UL << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x000000C0 */ +#define LPTIM_CFGR_TRGFLT LPTIM_CFGR_TRGFLT_Msk /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */ +#define LPTIM_CFGR_TRGFLT_0 (0x1U << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000040 */ +#define LPTIM_CFGR_TRGFLT_1 (0x2U << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000080 */ + +#define LPTIM_CFGR_PRESC_Pos (9U) +#define LPTIM_CFGR_PRESC_Msk (0x7UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000E00 */ +#define LPTIM_CFGR_PRESC LPTIM_CFGR_PRESC_Msk /*!< PRESC[2:0] bits (Clock prescaler) */ +#define LPTIM_CFGR_PRESC_0 (0x1U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000200 */ +#define LPTIM_CFGR_PRESC_1 (0x2U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000400 */ +#define LPTIM_CFGR_PRESC_2 (0x4U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000800 */ + +#define LPTIM_CFGR_TRIGSEL_Pos (13U) +#define LPTIM_CFGR_TRIGSEL_Msk (0x7UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x0000E000 */ +#define LPTIM_CFGR_TRIGSEL LPTIM_CFGR_TRIGSEL_Msk /*!< TRIGSEL[2:0]] bits (Trigger selector) */ +#define LPTIM_CFGR_TRIGSEL_0 (0x1U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00002000 */ +#define LPTIM_CFGR_TRIGSEL_1 (0x2U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00004000 */ +#define LPTIM_CFGR_TRIGSEL_2 (0x4U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00008000 */ + +#define LPTIM_CFGR_TRIGEN_Pos (17U) +#define LPTIM_CFGR_TRIGEN_Msk (0x3UL << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00060000 */ +#define LPTIM_CFGR_TRIGEN LPTIM_CFGR_TRIGEN_Msk /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */ +#define LPTIM_CFGR_TRIGEN_0 (0x1U << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00020000 */ +#define LPTIM_CFGR_TRIGEN_1 (0x2U << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00040000 */ + +#define LPTIM_CFGR_TIMOUT_Pos (19U) +#define LPTIM_CFGR_TIMOUT_Msk (0x1UL << LPTIM_CFGR_TIMOUT_Pos) /*!< 0x00080000 */ +#define LPTIM_CFGR_TIMOUT LPTIM_CFGR_TIMOUT_Msk /*!< Timeout enable */ +#define LPTIM_CFGR_WAVE_Pos (20U) +#define LPTIM_CFGR_WAVE_Msk (0x1UL << LPTIM_CFGR_WAVE_Pos) /*!< 0x00100000 */ +#define LPTIM_CFGR_WAVE LPTIM_CFGR_WAVE_Msk /*!< Waveform shape */ +#define LPTIM_CFGR_WAVPOL_Pos (21U) +#define LPTIM_CFGR_WAVPOL_Msk (0x1UL << LPTIM_CFGR_WAVPOL_Pos) /*!< 0x00200000 */ +#define LPTIM_CFGR_WAVPOL LPTIM_CFGR_WAVPOL_Msk /*!< Waveform shape polarity */ +#define LPTIM_CFGR_PRELOAD_Pos (22U) +#define LPTIM_CFGR_PRELOAD_Msk (0x1UL << LPTIM_CFGR_PRELOAD_Pos) /*!< 0x00400000 */ +#define LPTIM_CFGR_PRELOAD LPTIM_CFGR_PRELOAD_Msk /*!< Reg update mode */ +#define LPTIM_CFGR_COUNTMODE_Pos (23U) +#define LPTIM_CFGR_COUNTMODE_Msk (0x1UL << LPTIM_CFGR_COUNTMODE_Pos) /*!< 0x00800000 */ +#define LPTIM_CFGR_COUNTMODE LPTIM_CFGR_COUNTMODE_Msk /*!< Counter mode enable */ +#define LPTIM_CFGR_ENC_Pos (24U) +#define LPTIM_CFGR_ENC_Msk (0x1UL << LPTIM_CFGR_ENC_Pos) /*!< 0x01000000 */ +#define LPTIM_CFGR_ENC LPTIM_CFGR_ENC_Msk /*!< Encoder mode enable */ + +/****************** Bit definition for LPTIM_CR register ********************/ +#define LPTIM_CR_ENABLE_Pos (0U) +#define LPTIM_CR_ENABLE_Msk (0x1UL << LPTIM_CR_ENABLE_Pos) /*!< 0x00000001 */ +#define LPTIM_CR_ENABLE LPTIM_CR_ENABLE_Msk /*!< LPTIMer enable */ +#define LPTIM_CR_SNGSTRT_Pos (1U) +#define LPTIM_CR_SNGSTRT_Msk (0x1UL << LPTIM_CR_SNGSTRT_Pos) /*!< 0x00000002 */ +#define LPTIM_CR_SNGSTRT LPTIM_CR_SNGSTRT_Msk /*!< Timer start in single mode */ +#define LPTIM_CR_CNTSTRT_Pos (2U) +#define LPTIM_CR_CNTSTRT_Msk (0x1UL << LPTIM_CR_CNTSTRT_Pos) /*!< 0x00000004 */ +#define LPTIM_CR_CNTSTRT LPTIM_CR_CNTSTRT_Msk /*!< Timer start in continuous mode */ +#define LPTIM_CR_COUNTRST_Pos (3U) +#define LPTIM_CR_COUNTRST_Msk (0x1UL << LPTIM_CR_COUNTRST_Pos) /*!< 0x00000008 */ +#define LPTIM_CR_COUNTRST LPTIM_CR_COUNTRST_Msk /*!< Counter reset */ +#define LPTIM_CR_RSTARE_Pos (4U) +#define LPTIM_CR_RSTARE_Msk (0x1UL << LPTIM_CR_RSTARE_Pos) /*!< 0x00000010 */ +#define LPTIM_CR_RSTARE LPTIM_CR_RSTARE_Msk /*!< Reset after read enable */ + +/****************** Bit definition for LPTIM_CMP register *******************/ +#define LPTIM_CMP_CMP_Pos (0U) +#define LPTIM_CMP_CMP_Msk (0xFFFFUL << LPTIM_CMP_CMP_Pos) /*!< 0x0000FFFF */ +#define LPTIM_CMP_CMP LPTIM_CMP_CMP_Msk /*!< Compare register */ + +/****************** Bit definition for LPTIM_ARR register *******************/ +#define LPTIM_ARR_ARR_Pos (0U) +#define LPTIM_ARR_ARR_Msk (0xFFFFUL << LPTIM_ARR_ARR_Pos) /*!< 0x0000FFFF */ +#define LPTIM_ARR_ARR LPTIM_ARR_ARR_Msk /*!< Auto reload register */ + +/****************** Bit definition for LPTIM_CNT register *******************/ +#define LPTIM_CNT_CNT_Pos (0U) +#define LPTIM_CNT_CNT_Msk (0xFFFFUL << LPTIM_CNT_CNT_Pos) /*!< 0x0000FFFF */ +#define LPTIM_CNT_CNT LPTIM_CNT_CNT_Msk /*!< Counter register */ + +/****************** Bit definition for LPTIM_OR register *******************/ +#define LPTIM_OR_OR_Pos (0U) +#define LPTIM_OR_OR_Msk (0x1UL << LPTIM_OR_OR_Pos) /*!< 0x00000001 */ +#define LPTIM_OR_OR LPTIM_OR_OR_Msk /*!< OR[1:0] bits (Remap selection) */ +#define LPTIM_OR_OR_0 (0x1U << LPTIM_OR_OR_Pos) /*!< 0x00000001 */ + +/******************************************************************************/ +/* */ +/* Inter-Processor Communication Controller (IPCC) */ +/* */ +/******************************************************************************/ + +/********************** Bit definition for IPCC_C1CR register ***************/ +#define IPCC_C1CR_RXOIE_Pos (0U) +#define IPCC_C1CR_RXOIE_Msk (0x1UL << IPCC_C1CR_RXOIE_Pos) /*!< 0x00000001 */ +#define IPCC_C1CR_RXOIE IPCC_C1CR_RXOIE_Msk /*!< Processor M4 Receive channel occupied interrupt enable */ +#define IPCC_C1CR_TXFIE_Pos (16U) +#define IPCC_C1CR_TXFIE_Msk (0x1UL << IPCC_C1CR_TXFIE_Pos) /*!< 0x00010000 */ +#define IPCC_C1CR_TXFIE IPCC_C1CR_TXFIE_Msk /*!< Processor M4 Transmit channel free interrupt enable */ + +/********************** Bit definition for IPCC_C1MR register **************/ +#define IPCC_C1MR_CH1OM_Pos (0U) +#define IPCC_C1MR_CH1OM_Msk (0x1UL << IPCC_C1MR_CH1OM_Pos) /*!< 0x00000001 */ +#define IPCC_C1MR_CH1OM IPCC_C1MR_CH1OM_Msk /*!< M4 Channel1 occupied interrupt mask */ +#define IPCC_C1MR_CH2OM_Pos (1U) +#define IPCC_C1MR_CH2OM_Msk (0x1UL << IPCC_C1MR_CH2OM_Pos) /*!< 0x00000002 */ +#define IPCC_C1MR_CH2OM IPCC_C1MR_CH2OM_Msk /*!< M4 Channel2 occupied interrupt mask */ +#define IPCC_C1MR_CH3OM_Pos (2U) +#define IPCC_C1MR_CH3OM_Msk (0x1UL << IPCC_C1MR_CH3OM_Pos) /*!< 0x00000004 */ +#define IPCC_C1MR_CH3OM IPCC_C1MR_CH3OM_Msk /*!< M4 Channel3 occupied interrupt mask */ +#define IPCC_C1MR_CH4OM_Pos (3U) +#define IPCC_C1MR_CH4OM_Msk (0x1UL << IPCC_C1MR_CH4OM_Pos) /*!< 0x00000008 */ +#define IPCC_C1MR_CH4OM IPCC_C1MR_CH4OM_Msk /*!< M4 Channel4 occupied interrupt mask */ +#define IPCC_C1MR_CH5OM_Pos (4U) +#define IPCC_C1MR_CH5OM_Msk (0x1UL << IPCC_C1MR_CH5OM_Pos) /*!< 0x00000010 */ +#define IPCC_C1MR_CH5OM IPCC_C1MR_CH5OM_Msk /*!< M4 Channel5 occupied interrupt mask */ +#define IPCC_C1MR_CH6OM_Pos (5U) +#define IPCC_C1MR_CH6OM_Msk (0x1UL << IPCC_C1MR_CH6OM_Pos) /*!< 0x00000020 */ +#define IPCC_C1MR_CH6OM IPCC_C1MR_CH6OM_Msk /*!< M4 Channel6 occupied interrupt mask */ + +#define IPCC_C1MR_CH1FM_Pos (16U) +#define IPCC_C1MR_CH1FM_Msk (0x1UL << IPCC_C1MR_CH1FM_Pos) /*!< 0x00010000 */ +#define IPCC_C1MR_CH1FM IPCC_C1MR_CH1FM_Msk /*!< M4 Transmit Channel1 free interrupt mask */ +#define IPCC_C1MR_CH2FM_Pos (17U) +#define IPCC_C1MR_CH2FM_Msk (0x1UL << IPCC_C1MR_CH2FM_Pos) /*!< 0x00020000 */ +#define IPCC_C1MR_CH2FM IPCC_C1MR_CH2FM_Msk /*!< M4 Transmit Channel2 free interrupt mask */ +#define IPCC_C1MR_CH3FM_Pos (18U) +#define IPCC_C1MR_CH3FM_Msk (0x1UL << IPCC_C1MR_CH3FM_Pos) /*!< 0x00040000 */ +#define IPCC_C1MR_CH3FM IPCC_C1MR_CH3FM_Msk /*!< M4 Transmit Channel3 free interrupt mask */ +#define IPCC_C1MR_CH4FM_Pos (19U) +#define IPCC_C1MR_CH4FM_Msk (0x1UL << IPCC_C1MR_CH4FM_Pos) /*!< 0x00080000 */ +#define IPCC_C1MR_CH4FM IPCC_C1MR_CH4FM_Msk /*!< M4 Transmit Channel4 free interrupt mask */ +#define IPCC_C1MR_CH5FM_Pos (20U) +#define IPCC_C1MR_CH5FM_Msk (0x1UL << IPCC_C1MR_CH5FM_Pos) /*!< 0x00100000 */ +#define IPCC_C1MR_CH5FM IPCC_C1MR_CH5FM_Msk /*!< M4 Transmit Channel5 free interrupt mask */ +#define IPCC_C1MR_CH6FM_Pos (21U) +#define IPCC_C1MR_CH6FM_Msk (0x1UL << IPCC_C1MR_CH6FM_Pos) /*!< 0x00200000 */ +#define IPCC_C1MR_CH6FM IPCC_C1MR_CH6FM_Msk /*!< M4 Transmit Channel6 free interrupt mask */ + +/********************** Bit definition for IPCC_C1SCR register ***************/ +#define IPCC_C1SCR_CH1C_Pos (0U) +#define IPCC_C1SCR_CH1C_Msk (0x1UL << IPCC_C1SCR_CH1C_Pos) /*!< 0x00000001 */ +#define IPCC_C1SCR_CH1C IPCC_C1SCR_CH1C_Msk /*!< M4 receive Channel1 status clear */ +#define IPCC_C1SCR_CH2C_Pos (1U) +#define IPCC_C1SCR_CH2C_Msk (0x1UL << IPCC_C1SCR_CH2C_Pos) /*!< 0x00000002 */ +#define IPCC_C1SCR_CH2C IPCC_C1SCR_CH2C_Msk /*!< M4 receive Channel2 status clear */ +#define IPCC_C1SCR_CH3C_Pos (2U) +#define IPCC_C1SCR_CH3C_Msk (0x1UL << IPCC_C1SCR_CH3C_Pos) /*!< 0x00000004 */ +#define IPCC_C1SCR_CH3C IPCC_C1SCR_CH3C_Msk /*!< M4 receive Channel3 status clear */ +#define IPCC_C1SCR_CH4C_Pos (3U) +#define IPCC_C1SCR_CH4C_Msk (0x1UL << IPCC_C1SCR_CH4C_Pos) /*!< 0x00000008 */ +#define IPCC_C1SCR_CH4C IPCC_C1SCR_CH4C_Msk /*!< M4 receive Channel4 status clear */ +#define IPCC_C1SCR_CH5C_Pos (4U) +#define IPCC_C1SCR_CH5C_Msk (0x1UL << IPCC_C1SCR_CH5C_Pos) /*!< 0x00000010 */ +#define IPCC_C1SCR_CH5C IPCC_C1SCR_CH5C_Msk /*!< M4 receive Channel5 status clear */ +#define IPCC_C1SCR_CH6C_Pos (5U) +#define IPCC_C1SCR_CH6C_Msk (0x1UL << IPCC_C1SCR_CH6C_Pos) /*!< 0x00000020 */ +#define IPCC_C1SCR_CH6C IPCC_C1SCR_CH6C_Msk /*!< M4 receive Channel6 status clear */ + +#define IPCC_C1SCR_CH1S_Pos (16U) +#define IPCC_C1SCR_CH1S_Msk (0x1UL << IPCC_C1SCR_CH1S_Pos) /*!< 0x00010000 */ +#define IPCC_C1SCR_CH1S IPCC_C1SCR_CH1S_Msk /*!< M4 transmit Channel1 status set */ +#define IPCC_C1SCR_CH2S_Pos (17U) +#define IPCC_C1SCR_CH2S_Msk (0x1UL << IPCC_C1SCR_CH2S_Pos) /*!< 0x00020000 */ +#define IPCC_C1SCR_CH2S IPCC_C1SCR_CH2S_Msk /*!< M4 transmit Channel2 status set */ +#define IPCC_C1SCR_CH3S_Pos (18U) +#define IPCC_C1SCR_CH3S_Msk (0x1UL << IPCC_C1SCR_CH3S_Pos) /*!< 0x00040000 */ +#define IPCC_C1SCR_CH3S IPCC_C1SCR_CH3S_Msk /*!< M4 transmit Channel3 status set */ +#define IPCC_C1SCR_CH4S_Pos (19U) +#define IPCC_C1SCR_CH4S_Msk (0x1UL << IPCC_C1SCR_CH4S_Pos) /*!< 0x00080000 */ +#define IPCC_C1SCR_CH4S IPCC_C1SCR_CH4S_Msk /*!< M4 transmit Channel4 status set */ +#define IPCC_C1SCR_CH5S_Pos (20U) +#define IPCC_C1SCR_CH5S_Msk (0x1UL << IPCC_C1SCR_CH5S_Pos) /*!< 0x00100000 */ +#define IPCC_C1SCR_CH5S IPCC_C1SCR_CH5S_Msk /*!< M4 transmit Channel5 status set */ +#define IPCC_C1SCR_CH6S_Pos (21U) +#define IPCC_C1SCR_CH6S_Msk (0x1UL << IPCC_C1SCR_CH6S_Pos) /*!< 0x00200000 */ +#define IPCC_C1SCR_CH6S IPCC_C1SCR_CH6S_Msk /*!< M4 transmit Channel6 status set */ + +/********************** Bit definition for IPCC_C1TOC2SR register ***************/ +#define IPCC_C1TOC2SR_CH1F_Pos (0U) +#define IPCC_C1TOC2SR_CH1F_Msk (0x1UL << IPCC_C1TOC2SR_CH1F_Pos) /*!< 0x00000001 */ +#define IPCC_C1TOC2SR_CH1F IPCC_C1TOC2SR_CH1F_Msk /*!< M4 transmit to M4 receive Channel1 status flag before masking */ +#define IPCC_C1TOC2SR_CH2F_Pos (1U) +#define IPCC_C1TOC2SR_CH2F_Msk (0x1UL << IPCC_C1TOC2SR_CH2F_Pos) /*!< 0x00000002 */ +#define IPCC_C1TOC2SR_CH2F IPCC_C1TOC2SR_CH2F_Msk /*!< M4 transmit to M4 receive Channel2 status flag before masking */ +#define IPCC_C1TOC2SR_CH3F_Pos (2U) +#define IPCC_C1TOC2SR_CH3F_Msk (0x1UL << IPCC_C1TOC2SR_CH3F_Pos) /*!< 0x00000004 */ +#define IPCC_C1TOC2SR_CH3F IPCC_C1TOC2SR_CH3F_Msk /*!< M4 transmit to M4 receive Channel3 status flag before masking */ +#define IPCC_C1TOC2SR_CH4F_Pos (3U) +#define IPCC_C1TOC2SR_CH4F_Msk (0x1UL << IPCC_C1TOC2SR_CH4F_Pos) /*!< 0x00000008 */ +#define IPCC_C1TOC2SR_CH4F IPCC_C1TOC2SR_CH4F_Msk /*!< M4 transmit to M4 receive Channel4 status flag before masking */ +#define IPCC_C1TOC2SR_CH5F_Pos (4U) +#define IPCC_C1TOC2SR_CH5F_Msk (0x1UL << IPCC_C1TOC2SR_CH5F_Pos) /*!< 0x00000010 */ +#define IPCC_C1TOC2SR_CH5F IPCC_C1TOC2SR_CH5F_Msk /*!< M4 transmit to M4 receive Channel5 status flag before masking */ +#define IPCC_C1TOC2SR_CH6F_Pos (5U) +#define IPCC_C1TOC2SR_CH6F_Msk (0x1UL << IPCC_C1TOC2SR_CH6F_Pos) /*!< 0x00000020 */ +#define IPCC_C1TOC2SR_CH6F IPCC_C1TOC2SR_CH6F_Msk /*!< M4 transmit to M4 receive Channel6 status flag before masking */ + +/********************** Bit definition for IPCC_C2CR register ***************/ +#define IPCC_C2CR_RXOIE_Pos (0U) +#define IPCC_C2CR_RXOIE_Msk (0x1UL << IPCC_C2CR_RXOIE_Pos) /*!< 0x00000001 */ +#define IPCC_C2CR_RXOIE IPCC_C2CR_RXOIE_Msk /*!< Processor M0+ Receive channel occupied interrupt enable */ +#define IPCC_C2CR_TXFIE_Pos (16U) +#define IPCC_C2CR_TXFIE_Msk (0x1UL << IPCC_C2CR_TXFIE_Pos) /*!< 0x00010000 */ +#define IPCC_C2CR_TXFIE IPCC_C2CR_TXFIE_Msk /*!< Processor M0+ Transmit channel free interrupt enable */ + +/********************** Bit definition for IPCC_C2MR register ***************/ +#define IPCC_C2MR_CH1OM_Pos (0U) +#define IPCC_C2MR_CH1OM_Msk (0x1UL << IPCC_C2MR_CH1OM_Pos) /*!< 0x00000001 */ +#define IPCC_C2MR_CH1OM IPCC_C2MR_CH1OM_Msk /*!< M0+ Channel1 occupied interrupt mask */ +#define IPCC_C2MR_CH2OM_Pos (1U) +#define IPCC_C2MR_CH2OM_Msk (0x1UL << IPCC_C2MR_CH2OM_Pos) /*!< 0x00000002 */ +#define IPCC_C2MR_CH2OM IPCC_C2MR_CH2OM_Msk /*!< M0+ Channel2 occupied interrupt mask */ +#define IPCC_C2MR_CH3OM_Pos (2U) +#define IPCC_C2MR_CH3OM_Msk (0x1UL << IPCC_C2MR_CH3OM_Pos) /*!< 0x00000004 */ +#define IPCC_C2MR_CH3OM IPCC_C2MR_CH3OM_Msk /*!< M0+ Channel3 occupied interrupt mask */ +#define IPCC_C2MR_CH4OM_Pos (3U) +#define IPCC_C2MR_CH4OM_Msk (0x1UL << IPCC_C2MR_CH4OM_Pos) /*!< 0x00000008 */ +#define IPCC_C2MR_CH4OM IPCC_C2MR_CH4OM_Msk /*!< M0+ Channel4 occupied interrupt mask */ +#define IPCC_C2MR_CH5OM_Pos (4U) +#define IPCC_C2MR_CH5OM_Msk (0x1UL << IPCC_C2MR_CH5OM_Pos) /*!< 0x00000010 */ +#define IPCC_C2MR_CH5OM IPCC_C2MR_CH5OM_Msk /*!< M0+ Channel5 occupied interrupt mask */ +#define IPCC_C2MR_CH6OM_Pos (5U) +#define IPCC_C2MR_CH6OM_Msk (0x1UL << IPCC_C2MR_CH6OM_Pos) /*!< 0x00000020 */ +#define IPCC_C2MR_CH6OM IPCC_C2MR_CH6OM_Msk /*!< M0+ Channel6 occupied interrupt mask */ + +#define IPCC_C2MR_CH1FM_Pos (16U) +#define IPCC_C2MR_CH1FM_Msk (0x1UL << IPCC_C2MR_CH1FM_Pos) /*!< 0x00010000 */ +#define IPCC_C2MR_CH1FM IPCC_C2MR_CH1FM_Msk /*!< M0+ Transmit Channel1 free interrupt mask */ +#define IPCC_C2MR_CH2FM_Pos (17U) +#define IPCC_C2MR_CH2FM_Msk (0x1UL << IPCC_C2MR_CH2FM_Pos) /*!< 0x00020000 */ +#define IPCC_C2MR_CH2FM IPCC_C2MR_CH2FM_Msk /*!< M0+ Transmit Channel2 free interrupt mask */ +#define IPCC_C2MR_CH3FM_Pos (18U) +#define IPCC_C2MR_CH3FM_Msk (0x1UL << IPCC_C2MR_CH3FM_Pos) /*!< 0x00040000 */ +#define IPCC_C2MR_CH3FM IPCC_C2MR_CH3FM_Msk /*!< M0+ Transmit Channel3 free interrupt mask */ +#define IPCC_C2MR_CH4FM_Pos (19U) +#define IPCC_C2MR_CH4FM_Msk (0x1UL << IPCC_C2MR_CH4FM_Pos) /*!< 0x00080000 */ +#define IPCC_C2MR_CH4FM IPCC_C2MR_CH4FM_Msk /*!< M0+ Transmit Channel4 free interrupt mask */ +#define IPCC_C2MR_CH5FM_Pos (20U) +#define IPCC_C2MR_CH5FM_Msk (0x1UL << IPCC_C2MR_CH5FM_Pos) /*!< 0x00100000 */ +#define IPCC_C2MR_CH5FM IPCC_C2MR_CH5FM_Msk /*!< M0+ Transmit Channel5 free interrupt mask */ +#define IPCC_C2MR_CH6FM_Pos (21U) +#define IPCC_C2MR_CH6FM_Msk (0x1UL << IPCC_C2MR_CH6FM_Pos) /*!< 0x00200000 */ +#define IPCC_C2MR_CH6FM IPCC_C2MR_CH6FM_Msk /*!< M0+ Transmit Channel6 free interrupt mask */ + +/********************** Bit definition for IPCC_C2SCR register ***************/ +#define IPCC_C2SCR_CH1C_Pos (0U) +#define IPCC_C2SCR_CH1C_Msk (0x1UL << IPCC_C2SCR_CH1C_Pos) /*!< 0x00000001 */ +#define IPCC_C2SCR_CH1C IPCC_C2SCR_CH1C_Msk /*!< M0+ receive Channel1 status clear */ +#define IPCC_C2SCR_CH2C_Pos (1U) +#define IPCC_C2SCR_CH2C_Msk (0x1UL << IPCC_C2SCR_CH2C_Pos) /*!< 0x00000002 */ +#define IPCC_C2SCR_CH2C IPCC_C2SCR_CH2C_Msk /*!< M0+ receive Channel2 status clear */ +#define IPCC_C2SCR_CH3C_Pos (2U) +#define IPCC_C2SCR_CH3C_Msk (0x1UL << IPCC_C2SCR_CH3C_Pos) /*!< 0x00000004 */ +#define IPCC_C2SCR_CH3C IPCC_C2SCR_CH3C_Msk /*!< M0+ receive Channel3 status clear */ +#define IPCC_C2SCR_CH4C_Pos (3U) +#define IPCC_C2SCR_CH4C_Msk (0x1UL << IPCC_C2SCR_CH4C_Pos) /*!< 0x00000008 */ +#define IPCC_C2SCR_CH4C IPCC_C2SCR_CH4C_Msk /*!< M0+ receive Channel4 status clear */ +#define IPCC_C2SCR_CH5C_Pos (4U) +#define IPCC_C2SCR_CH5C_Msk (0x1UL << IPCC_C2SCR_CH5C_Pos) /*!< 0x00000010 */ +#define IPCC_C2SCR_CH5C IPCC_C2SCR_CH5C_Msk /*!< M0+ receive Channel5 status clear */ +#define IPCC_C2SCR_CH6C_Pos (5U) +#define IPCC_C2SCR_CH6C_Msk (0x1UL << IPCC_C2SCR_CH6C_Pos) /*!< 0x00000020 */ +#define IPCC_C2SCR_CH6C IPCC_C2SCR_CH6C_Msk /*!< M0+ receive Channel6 status clear */ + +#define IPCC_C2SCR_CH1S_Pos (16U) +#define IPCC_C2SCR_CH1S_Msk (0x1UL << IPCC_C2SCR_CH1S_Pos) /*!< 0x00010000 */ +#define IPCC_C2SCR_CH1S IPCC_C2SCR_CH1S_Msk /*!< M0+ transmit Channel1 status set */ +#define IPCC_C2SCR_CH2S_Pos (17U) +#define IPCC_C2SCR_CH2S_Msk (0x1UL << IPCC_C2SCR_CH2S_Pos) /*!< 0x00020000 */ +#define IPCC_C2SCR_CH2S IPCC_C2SCR_CH2S_Msk /*!< M0+ transmit Channel2 status set */ +#define IPCC_C2SCR_CH3S_Pos (18U) +#define IPCC_C2SCR_CH3S_Msk (0x1UL << IPCC_C2SCR_CH3S_Pos) /*!< 0x00040000 */ +#define IPCC_C2SCR_CH3S IPCC_C2SCR_CH3S_Msk /*!< M0+ transmit Channel3 status set */ +#define IPCC_C2SCR_CH4S_Pos (19U) +#define IPCC_C2SCR_CH4S_Msk (0x1UL << IPCC_C2SCR_CH4S_Pos) /*!< 0x00080000 */ +#define IPCC_C2SCR_CH4S IPCC_C2SCR_CH4S_Msk /*!< M0+ transmit Channel4 status set */ +#define IPCC_C2SCR_CH5S_Pos (20U) +#define IPCC_C2SCR_CH5S_Msk (0x1UL << IPCC_C2SCR_CH5S_Pos) /*!< 0x00100000 */ +#define IPCC_C2SCR_CH5S IPCC_C2SCR_CH5S_Msk /*!< M0+ transmit Channel5 status set */ +#define IPCC_C2SCR_CH6S_Pos (21U) +#define IPCC_C2SCR_CH6S_Msk (0x1UL << IPCC_C2SCR_CH6S_Pos) /*!< 0x00200000 */ +#define IPCC_C2SCR_CH6S IPCC_C2SCR_CH6S_Msk /*!< M0+ transmit Channel6 status set */ + +/********************** Bit definition for IPCC_C2TOC1SR register ***************/ +#define IPCC_C2TOC1SR_CH1F_Pos (0U) +#define IPCC_C2TOC1SR_CH1F_Msk (0x1UL << IPCC_C2TOC1SR_CH1F_Pos) /*!< 0x00000001 */ +#define IPCC_C2TOC1SR_CH1F IPCC_C2TOC1SR_CH1F_Msk /*!< M0+ transmit to M0 receive Channel1 status flag before masking */ +#define IPCC_C2TOC1SR_CH2F_Pos (1U) +#define IPCC_C2TOC1SR_CH2F_Msk (0x1UL << IPCC_C2TOC1SR_CH2F_Pos) /*!< 0x00000002 */ +#define IPCC_C2TOC1SR_CH2F IPCC_C2TOC1SR_CH2F_Msk /*!< M0+ transmit to M0 receive Channel2 status flag before masking */ +#define IPCC_C2TOC1SR_CH3F_Pos (2U) +#define IPCC_C2TOC1SR_CH3F_Msk (0x1UL << IPCC_C2TOC1SR_CH3F_Pos) /*!< 0x00000004 */ +#define IPCC_C2TOC1SR_CH3F IPCC_C2TOC1SR_CH3F_Msk /*!< M0+ transmit to M0 receive Channel3 status flag before masking */ +#define IPCC_C2TOC1SR_CH4F_Pos (3U) +#define IPCC_C2TOC1SR_CH4F_Msk (0x1UL << IPCC_C2TOC1SR_CH4F_Pos) /*!< 0x00000008 */ +#define IPCC_C2TOC1SR_CH4F IPCC_C2TOC1SR_CH4F_Msk /*!< M0+ transmit to M0 receive Channel4 status flag before masking */ +#define IPCC_C2TOC1SR_CH5F_Pos (4U) +#define IPCC_C2TOC1SR_CH5F_Msk (0x1UL << IPCC_C2TOC1SR_CH5F_Pos) /*!< 0x00000010 */ +#define IPCC_C2TOC1SR_CH5F IPCC_C2TOC1SR_CH5F_Msk /*!< M0+ transmit to M0 receive Channel5 status flag before masking */ +#define IPCC_C2TOC1SR_CH6F_Pos (5U) +#define IPCC_C2TOC1SR_CH6F_Msk (0x1UL << IPCC_C2TOC1SR_CH6F_Pos) /*!< 0x00000020 */ +#define IPCC_C2TOC1SR_CH6F IPCC_C2TOC1SR_CH6F_Msk /*!< M0+ transmit to M0 receive Channel6 status flag before masking */ + +/********************** Bit definition for IPCC_C1CR register ***************/ +#define IPCC_CR_RXOIE_Pos IPCC_C1CR_RXOIE_Pos +#define IPCC_CR_RXOIE_Msk IPCC_C1CR_RXOIE_Msk +#define IPCC_CR_RXOIE IPCC_C1CR_RXOIE +#define IPCC_CR_TXFIE_Pos IPCC_C1CR_TXFIE_Pos +#define IPCC_CR_TXFIE_Msk IPCC_C1CR_TXFIE_Msk +#define IPCC_CR_TXFIE IPCC_C1CR_TXFIE + +/********************** Bit definition for IPCC_C1MR register **************/ +#define IPCC_MR_CH1OM_Pos IPCC_C1MR_CH1OM_Pos +#define IPCC_MR_CH1OM_Msk IPCC_C1MR_CH1OM_Msk +#define IPCC_MR_CH1OM IPCC_C1MR_CH1OM +#define IPCC_MR_CH2OM_Pos IPCC_C1MR_CH2OM_Pos +#define IPCC_MR_CH2OM_Msk IPCC_C1MR_CH2OM_Msk +#define IPCC_MR_CH2OM IPCC_C1MR_CH2OM +#define IPCC_MR_CH3OM_Pos IPCC_C1MR_CH3OM_Pos +#define IPCC_MR_CH3OM_Msk IPCC_C1MR_CH3OM_Msk +#define IPCC_MR_CH3OM IPCC_C1MR_CH3OM +#define IPCC_MR_CH4OM_Pos IPCC_C1MR_CH4OM_Pos +#define IPCC_MR_CH4OM_Msk IPCC_C1MR_CH4OM_Msk +#define IPCC_MR_CH4OM IPCC_C1MR_CH4OM +#define IPCC_MR_CH5OM_Pos IPCC_C1MR_CH5OM_Pos +#define IPCC_MR_CH5OM_Msk IPCC_C1MR_CH5OM_Msk +#define IPCC_MR_CH5OM IPCC_C1MR_CH5OM +#define IPCC_MR_CH6OM_Pos IPCC_C1MR_CH6OM_Pos +#define IPCC_MR_CH6OM_Msk IPCC_C1MR_CH6OM_Msk +#define IPCC_MR_CH6OM IPCC_C1MR_CH6OM + +#define IPCC_MR_CH1FM_Pos IPCC_C1MR_CH1FM_Pos +#define IPCC_MR_CH1FM_Msk IPCC_C1MR_CH1FM_Msk +#define IPCC_MR_CH1FM IPCC_C1MR_CH1FM +#define IPCC_MR_CH2FM_Pos IPCC_C1MR_CH2FM_Pos +#define IPCC_MR_CH2FM_Msk IPCC_C1MR_CH2FM_Msk +#define IPCC_MR_CH2FM IPCC_C1MR_CH2FM +#define IPCC_MR_CH3FM_Pos IPCC_C1MR_CH3FM_Pos +#define IPCC_MR_CH3FM_Msk IPCC_C1MR_CH3FM_Msk +#define IPCC_MR_CH3FM IPCC_C1MR_CH3FM +#define IPCC_MR_CH4FM_Pos IPCC_C1MR_CH4FM_Pos +#define IPCC_MR_CH4FM_Msk IPCC_C1MR_CH4FM_Msk +#define IPCC_MR_CH4FM IPCC_C1MR_CH4FM +#define IPCC_MR_CH5FM_Pos IPCC_C1MR_CH5FM_Pos +#define IPCC_MR_CH5FM_Msk IPCC_C1MR_CH5FM_Msk +#define IPCC_MR_CH5FM IPCC_C1MR_CH5FM +#define IPCC_MR_CH6FM_Pos IPCC_C1MR_CH6FM_Pos +#define IPCC_MR_CH6FM_Msk IPCC_C1MR_CH6FM_Msk +#define IPCC_MR_CH6FM IPCC_C1MR_CH6FM + +/********************** Bit definition for IPCC_C1SCR register ***************/ +#define IPCC_SCR_CH1C_Pos IPCC_C1SCR_CH1C_Pos +#define IPCC_SCR_CH1C_Msk IPCC_C1SCR_CH1C_Msk +#define IPCC_SCR_CH1C IPCC_C1SCR_CH1C +#define IPCC_SCR_CH2C_Pos IPCC_C1SCR_CH2C_Pos +#define IPCC_SCR_CH2C_Msk IPCC_C1SCR_CH2C_Msk +#define IPCC_SCR_CH2C IPCC_C1SCR_CH2C +#define IPCC_SCR_CH3C_Pos IPCC_C1SCR_CH3C_Pos +#define IPCC_SCR_CH3C_Msk IPCC_C1SCR_CH3C_Msk +#define IPCC_SCR_CH3C IPCC_C1SCR_CH3C +#define IPCC_SCR_CH4C_Pos IPCC_C1SCR_CH4C_Pos +#define IPCC_SCR_CH4C_Msk IPCC_C1SCR_CH4C_Msk +#define IPCC_SCR_CH4C IPCC_C1SCR_CH4C +#define IPCC_SCR_CH5C_Pos IPCC_C1SCR_CH5C_Pos +#define IPCC_SCR_CH5C_Msk IPCC_C1SCR_CH5C_Msk +#define IPCC_SCR_CH5C IPCC_C1SCR_CH5C +#define IPCC_SCR_CH6C_Pos IPCC_C1SCR_CH6C_Pos +#define IPCC_SCR_CH6C_Msk IPCC_C1SCR_CH6C_Msk +#define IPCC_SCR_CH6C IPCC_C1SCR_CH6C + +#define IPCC_SCR_CH1S_Pos IPCC_C1SCR_CH1S_Pos +#define IPCC_SCR_CH1S_Msk IPCC_C1SCR_CH1S_Msk +#define IPCC_SCR_CH1S IPCC_C1SCR_CH1S +#define IPCC_SCR_CH2S_Pos IPCC_C1SCR_CH2S_Pos +#define IPCC_SCR_CH2S_Msk IPCC_C1SCR_CH2S_Msk +#define IPCC_SCR_CH2S IPCC_C1SCR_CH2S +#define IPCC_SCR_CH3S_Pos IPCC_C1SCR_CH3S_Pos +#define IPCC_SCR_CH3S_Msk IPCC_C1SCR_CH3S_Msk +#define IPCC_SCR_CH3S IPCC_C1SCR_CH3S +#define IPCC_SCR_CH4S_Pos IPCC_C1SCR_CH4S_Pos +#define IPCC_SCR_CH4S_Msk IPCC_C1SCR_CH4S_Msk +#define IPCC_SCR_CH4S IPCC_C1SCR_CH4S +#define IPCC_SCR_CH5S_Pos IPCC_C1SCR_CH5S_Pos +#define IPCC_SCR_CH5S_Msk IPCC_C1SCR_CH5S_Msk +#define IPCC_SCR_CH5S IPCC_C1SCR_CH5S +#define IPCC_SCR_CH6S_Pos IPCC_C1SCR_CH6S_Pos +#define IPCC_SCR_CH6S_Msk IPCC_C1SCR_CH6S_Msk +#define IPCC_SCR_CH6S IPCC_C1SCR_CH6S + +/********************** Bit definition for IPCC_C1TOC2SR register ***************/ +#define IPCC_SR_CH1F_Pos IPCC_C1TOC2SR_CH1F_Pos +#define IPCC_SR_CH1F_Msk IPCC_C1TOC2SR_CH1F_Msk +#define IPCC_SR_CH1F IPCC_C1TOC2SR_CH1F +#define IPCC_SR_CH2F_Pos IPCC_C1TOC2SR_CH2F_Pos +#define IPCC_SR_CH2F_Msk IPCC_C1TOC2SR_CH2F_Msk +#define IPCC_SR_CH2F IPCC_C1TOC2SR_CH2F +#define IPCC_SR_CH3F_Pos IPCC_C1TOC2SR_CH3F_Pos +#define IPCC_SR_CH3F_Msk IPCC_C1TOC2SR_CH3F_Msk +#define IPCC_SR_CH3F IPCC_C1TOC2SR_CH3F +#define IPCC_SR_CH4F_Pos IPCC_C1TOC2SR_CH4F_Pos +#define IPCC_SR_CH4F_Msk IPCC_C1TOC2SR_CH4F_Msk +#define IPCC_SR_CH4F IPCC_C1TOC2SR_CH4F +#define IPCC_SR_CH5F_Pos IPCC_C1TOC2SR_CH5F_Pos +#define IPCC_SR_CH5F_Msk IPCC_C1TOC2SR_CH5F_Msk +#define IPCC_SR_CH5F IPCC_C1TOC2SR_CH5F +#define IPCC_SR_CH6F_Pos IPCC_C1TOC2SR_CH6F_Pos +#define IPCC_SR_CH6F_Msk IPCC_C1TOC2SR_CH6F_Msk +#define IPCC_SR_CH6F IPCC_C1TOC2SR_CH6F + +/******************** Number of IPCC channels ******************************/ +#define IPCC_CHANNEL_NUMBER 6U + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */ +/* */ +/******************************************************************************/ +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_UE_Pos (0U) +#define USART_CR1_UE_Msk (0x1UL << USART_CR1_UE_Pos) /*!< 0x00000001 */ +#define USART_CR1_UE USART_CR1_UE_Msk /*!< USART Enable */ +#define USART_CR1_UESM_Pos (1U) +#define USART_CR1_UESM_Msk (0x1UL << USART_CR1_UESM_Pos) /*!< 0x00000002 */ +#define USART_CR1_UESM USART_CR1_UESM_Msk /*!< USART Enable in STOP Mode */ +#define USART_CR1_RE_Pos (2U) +#define USART_CR1_RE_Msk (0x1UL << USART_CR1_RE_Pos) /*!< 0x00000004 */ +#define USART_CR1_RE USART_CR1_RE_Msk /*!< Receiver Enable */ +#define USART_CR1_TE_Pos (3U) +#define USART_CR1_TE_Msk (0x1UL << USART_CR1_TE_Pos) /*!< 0x00000008 */ +#define USART_CR1_TE USART_CR1_TE_Msk /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE_Pos (4U) +#define USART_CR1_IDLEIE_Msk (0x1UL << USART_CR1_IDLEIE_Pos) /*!< 0x00000010 */ +#define USART_CR1_IDLEIE USART_CR1_IDLEIE_Msk /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE_Pos (5U) +#define USART_CR1_RXNEIE_Msk (0x1UL << USART_CR1_RXNEIE_Pos) /*!< 0x00000020 */ +#define USART_CR1_RXNEIE USART_CR1_RXNEIE_Msk /*!< RXNE Interrupt Enable */ +#define USART_CR1_RXNEIE_RXFNEIE_Pos USART_CR1_RXNEIE_Pos +#define USART_CR1_RXNEIE_RXFNEIE_Msk USART_CR1_RXNEIE_Msk /*!< 0x00000020 */ +#define USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_Msk /*!< RXNE and RX FIFO Not Empty Interrupt Enable */ +#define USART_CR1_TCIE_Pos (6U) +#define USART_CR1_TCIE_Msk (0x1UL << USART_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define USART_CR1_TCIE USART_CR1_TCIE_Msk /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE_Pos (7U) +#define USART_CR1_TXEIE_Msk (0x1UL << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ +#define USART_CR1_TXEIE USART_CR1_TXEIE_Msk /*!< TXE Interrupt Enable */ +#define USART_CR1_TXEIE_TXFNFIE_Pos (7U) +#define USART_CR1_TXEIE_TXFNFIE_Msk (0x1UL << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ +#define USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE /*!< TXE and TX FIFO Not Full Interrupt Enable */ +#define USART_CR1_PEIE_Pos (8U) +#define USART_CR1_PEIE_Msk (0x1UL << USART_CR1_PEIE_Pos) /*!< 0x00000100 */ +#define USART_CR1_PEIE USART_CR1_PEIE_Msk /*!< PE Interrupt Enable */ +#define USART_CR1_PS_Pos (9U) +#define USART_CR1_PS_Msk (0x1UL << USART_CR1_PS_Pos) /*!< 0x00000200 */ +#define USART_CR1_PS USART_CR1_PS_Msk /*!< Parity Selection */ +#define USART_CR1_PCE_Pos (10U) +#define USART_CR1_PCE_Msk (0x1UL << USART_CR1_PCE_Pos) /*!< 0x00000400 */ +#define USART_CR1_PCE USART_CR1_PCE_Msk /*!< Parity Control Enable */ +#define USART_CR1_WAKE_Pos (11U) +#define USART_CR1_WAKE_Msk (0x1UL << USART_CR1_WAKE_Pos) /*!< 0x00000800 */ +#define USART_CR1_WAKE USART_CR1_WAKE_Msk /*!< Receiver Wakeup method */ +#define USART_CR1_M0_Pos (12U) +#define USART_CR1_M0_Msk (0x1UL << USART_CR1_M0_Pos) /*!< 0x00001000 */ +#define USART_CR1_M0 USART_CR1_M0_Msk /*!< Word length - Bit 0 */ +#define USART_CR1_MME_Pos (13U) +#define USART_CR1_MME_Msk (0x1UL << USART_CR1_MME_Pos) /*!< 0x00002000 */ +#define USART_CR1_MME USART_CR1_MME_Msk /*!< Mute Mode Enable */ +#define USART_CR1_CMIE_Pos (14U) +#define USART_CR1_CMIE_Msk (0x1UL << USART_CR1_CMIE_Pos) /*!< 0x00004000 */ +#define USART_CR1_CMIE USART_CR1_CMIE_Msk /*!< Character match interrupt enable */ +#define USART_CR1_OVER8_Pos (15U) +#define USART_CR1_OVER8_Msk (0x1UL << USART_CR1_OVER8_Pos) /*!< 0x00008000 */ +#define USART_CR1_OVER8 USART_CR1_OVER8_Msk /*!< Oversampling by 8-bit or 16-bit mode */ +#define USART_CR1_DEDT_Pos (16U) +#define USART_CR1_DEDT_Msk (0x1FUL << USART_CR1_DEDT_Pos) /*!< 0x001F0000 */ +#define USART_CR1_DEDT USART_CR1_DEDT_Msk /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */ +#define USART_CR1_DEDT_0 (0x01U << USART_CR1_DEDT_Pos) /*!< 0x00010000 */ +#define USART_CR1_DEDT_1 (0x02U << USART_CR1_DEDT_Pos) /*!< 0x00020000 */ +#define USART_CR1_DEDT_2 (0x04U << USART_CR1_DEDT_Pos) /*!< 0x00040000 */ +#define USART_CR1_DEDT_3 (0x08U << USART_CR1_DEDT_Pos) /*!< 0x00080000 */ +#define USART_CR1_DEDT_4 (0x10U << USART_CR1_DEDT_Pos) /*!< 0x00100000 */ +#define USART_CR1_DEAT_Pos (21U) +#define USART_CR1_DEAT_Msk (0x1FUL << USART_CR1_DEAT_Pos) /*!< 0x03E00000 */ +#define USART_CR1_DEAT USART_CR1_DEAT_Msk /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */ +#define USART_CR1_DEAT_0 (0x01U << USART_CR1_DEAT_Pos) /*!< 0x00200000 */ +#define USART_CR1_DEAT_1 (0x02U << USART_CR1_DEAT_Pos) /*!< 0x00400000 */ +#define USART_CR1_DEAT_2 (0x04U << USART_CR1_DEAT_Pos) /*!< 0x00800000 */ +#define USART_CR1_DEAT_3 (0x08U << USART_CR1_DEAT_Pos) /*!< 0x01000000 */ +#define USART_CR1_DEAT_4 (0x10U << USART_CR1_DEAT_Pos) /*!< 0x02000000 */ +#define USART_CR1_RTOIE_Pos (26U) +#define USART_CR1_RTOIE_Msk (0x1UL << USART_CR1_RTOIE_Pos) /*!< 0x04000000 */ +#define USART_CR1_RTOIE USART_CR1_RTOIE_Msk /*!< Receive Time Out Interrupt Enable */ +#define USART_CR1_EOBIE_Pos (27U) +#define USART_CR1_EOBIE_Msk (0x1UL << USART_CR1_EOBIE_Pos) /*!< 0x08000000 */ +#define USART_CR1_EOBIE USART_CR1_EOBIE_Msk /*!< End of Block Interrupt Enable */ +#define USART_CR1_M1_Pos (28U) +#define USART_CR1_M1_Msk (0x1UL << USART_CR1_M1_Pos) /*!< 0x10000000 */ +#define USART_CR1_M1 USART_CR1_M1_Msk /*!< Word length - Bit 1 */ +#define USART_CR1_M (uint32_t)(USART_CR1_M1 | USART_CR1_M0) /*!< Word length */ +#define USART_CR1_FIFOEN_Pos (29U) +#define USART_CR1_FIFOEN_Msk (0x1UL << USART_CR1_FIFOEN_Pos) /*!< 0x20000000 */ +#define USART_CR1_FIFOEN USART_CR1_FIFOEN_Msk /*!< FIFO mode enable */ +#define USART_CR1_TXFEIE_Pos (30U) +#define USART_CR1_TXFEIE_Msk (0x1UL << USART_CR1_TXFEIE_Pos) /*!< 0x40000000 */ +#define USART_CR1_TXFEIE USART_CR1_TXFEIE_Msk /*!< TX FIFO Empty Interrupt Enable */ +#define USART_CR1_RXFFIE_Pos (31U) +#define USART_CR1_RXFFIE_Msk (0x1UL << USART_CR1_RXFFIE_Pos) /*!< 0x80000000 */ +#define USART_CR1_RXFFIE USART_CR1_RXFFIE_Msk /*!< RX FIFO Full Interrupt Enable */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_SLVEN_Pos (0U) +#define USART_CR2_SLVEN_Msk (0x1UL << USART_CR2_SLVEN_Pos) /*!< 0x00000001 */ +#define USART_CR2_SLVEN USART_CR2_SLVEN_Msk /*!< Synchronous Slave mode enable */ +#define USART_CR2_DIS_NSS_Pos (3U) +#define USART_CR2_DIS_NSS_Msk (0x1UL << USART_CR2_DIS_NSS_Pos) /*!< 0x00000008 */ +#define USART_CR2_DIS_NSS USART_CR2_DIS_NSS_Msk /*!< Slave Select (NSS) pin management */ +#define USART_CR2_ADDM7_Pos (4U) +#define USART_CR2_ADDM7_Msk (0x1UL << USART_CR2_ADDM7_Pos) /*!< 0x00000010 */ +#define USART_CR2_ADDM7 USART_CR2_ADDM7_Msk /*!< 7-bit or 4-bit Address Detection */ +#define USART_CR2_LBDL_Pos (5U) +#define USART_CR2_LBDL_Msk (0x1UL << USART_CR2_LBDL_Pos) /*!< 0x00000020 */ +#define USART_CR2_LBDL USART_CR2_LBDL_Msk /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE_Pos (6U) +#define USART_CR2_LBDIE_Msk (0x1UL << USART_CR2_LBDIE_Pos) /*!< 0x00000040 */ +#define USART_CR2_LBDIE USART_CR2_LBDIE_Msk /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL_Pos (8U) +#define USART_CR2_LBCL_Msk (0x1UL << USART_CR2_LBCL_Pos) /*!< 0x00000100 */ +#define USART_CR2_LBCL USART_CR2_LBCL_Msk /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA_Pos (9U) +#define USART_CR2_CPHA_Msk (0x1UL << USART_CR2_CPHA_Pos) /*!< 0x00000200 */ +#define USART_CR2_CPHA USART_CR2_CPHA_Msk /*!< Clock Phase */ +#define USART_CR2_CPOL_Pos (10U) +#define USART_CR2_CPOL_Msk (0x1UL << USART_CR2_CPOL_Pos) /*!< 0x00000400 */ +#define USART_CR2_CPOL USART_CR2_CPOL_Msk /*!< Clock Polarity */ +#define USART_CR2_CLKEN_Pos (11U) +#define USART_CR2_CLKEN_Msk (0x1UL << USART_CR2_CLKEN_Pos) /*!< 0x00000800 */ +#define USART_CR2_CLKEN USART_CR2_CLKEN_Msk /*!< Clock Enable */ +#define USART_CR2_STOP_Pos (12U) +#define USART_CR2_STOP_Msk (0x3UL << USART_CR2_STOP_Pos) /*!< 0x00003000 */ +#define USART_CR2_STOP USART_CR2_STOP_Msk /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 (0x1U << USART_CR2_STOP_Pos) /*!< 0x00001000 */ +#define USART_CR2_STOP_1 (0x2U << USART_CR2_STOP_Pos) /*!< 0x00002000 */ +#define USART_CR2_LINEN_Pos (14U) +#define USART_CR2_LINEN_Msk (0x1UL << USART_CR2_LINEN_Pos) /*!< 0x00004000 */ +#define USART_CR2_LINEN USART_CR2_LINEN_Msk /*!< LIN mode enable */ +#define USART_CR2_SWAP_Pos (15U) +#define USART_CR2_SWAP_Msk (0x1UL << USART_CR2_SWAP_Pos) /*!< 0x00008000 */ +#define USART_CR2_SWAP USART_CR2_SWAP_Msk /*!< SWAP TX/RX pins */ +#define USART_CR2_RXINV_Pos (16U) +#define USART_CR2_RXINV_Msk (0x1UL << USART_CR2_RXINV_Pos) /*!< 0x00010000 */ +#define USART_CR2_RXINV USART_CR2_RXINV_Msk /*!< RX pin active level inversion */ +#define USART_CR2_TXINV_Pos (17U) +#define USART_CR2_TXINV_Msk (0x1UL << USART_CR2_TXINV_Pos) /*!< 0x00020000 */ +#define USART_CR2_TXINV USART_CR2_TXINV_Msk /*!< TX pin active level inversion */ +#define USART_CR2_DATAINV_Pos (18U) +#define USART_CR2_DATAINV_Msk (0x1UL << USART_CR2_DATAINV_Pos) /*!< 0x00040000 */ +#define USART_CR2_DATAINV USART_CR2_DATAINV_Msk /*!< Binary data inversion */ +#define USART_CR2_MSBFIRST_Pos (19U) +#define USART_CR2_MSBFIRST_Msk (0x1UL << USART_CR2_MSBFIRST_Pos) /*!< 0x00080000 */ +#define USART_CR2_MSBFIRST USART_CR2_MSBFIRST_Msk /*!< Most Significant Bit First */ +#define USART_CR2_ABREN_Pos (20U) +#define USART_CR2_ABREN_Msk (0x1UL << USART_CR2_ABREN_Pos) /*!< 0x00100000 */ +#define USART_CR2_ABREN USART_CR2_ABREN_Msk /*!< Auto Baud-Rate Enable*/ +#define USART_CR2_ABRMODE_Pos (21U) +#define USART_CR2_ABRMODE_Msk (0x3UL << USART_CR2_ABRMODE_Pos) /*!< 0x00600000 */ +#define USART_CR2_ABRMODE USART_CR2_ABRMODE_Msk /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */ +#define USART_CR2_ABRMODE_0 (0x1U << USART_CR2_ABRMODE_Pos) /*!< 0x00200000 */ +#define USART_CR2_ABRMODE_1 (0x2U << USART_CR2_ABRMODE_Pos) /*!< 0x00400000 */ +#define USART_CR2_RTOEN_Pos (23U) +#define USART_CR2_RTOEN_Msk (0x1UL << USART_CR2_RTOEN_Pos) /*!< 0x00800000 */ +#define USART_CR2_RTOEN USART_CR2_RTOEN_Msk /*!< Receiver Time-Out enable */ +#define USART_CR2_ADD_Pos (24U) +#define USART_CR2_ADD_Msk (0xFFUL << USART_CR2_ADD_Pos) /*!< 0xFF000000 */ +#define USART_CR2_ADD USART_CR2_ADD_Msk /*!< Address of the USART node */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE_Pos (0U) +#define USART_CR3_EIE_Msk (0x1UL << USART_CR3_EIE_Pos) /*!< 0x00000001 */ +#define USART_CR3_EIE USART_CR3_EIE_Msk /*!< Error Interrupt Enable */ +#define USART_CR3_IREN_Pos (1U) +#define USART_CR3_IREN_Msk (0x1UL << USART_CR3_IREN_Pos) /*!< 0x00000002 */ +#define USART_CR3_IREN USART_CR3_IREN_Msk /*!< IrDA mode Enable */ +#define USART_CR3_IRLP_Pos (2U) +#define USART_CR3_IRLP_Msk (0x1UL << USART_CR3_IRLP_Pos) /*!< 0x00000004 */ +#define USART_CR3_IRLP USART_CR3_IRLP_Msk /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL_Pos (3U) +#define USART_CR3_HDSEL_Msk (0x1UL << USART_CR3_HDSEL_Pos) /*!< 0x00000008 */ +#define USART_CR3_HDSEL USART_CR3_HDSEL_Msk /*!< Half-Duplex Selection */ +#define USART_CR3_NACK_Pos (4U) +#define USART_CR3_NACK_Msk (0x1UL << USART_CR3_NACK_Pos) /*!< 0x00000010 */ +#define USART_CR3_NACK USART_CR3_NACK_Msk /*!< SmartCard NACK enable */ +#define USART_CR3_SCEN_Pos (5U) +#define USART_CR3_SCEN_Msk (0x1UL << USART_CR3_SCEN_Pos) /*!< 0x00000020 */ +#define USART_CR3_SCEN USART_CR3_SCEN_Msk /*!< SmartCard mode enable */ +#define USART_CR3_DMAR_Pos (6U) +#define USART_CR3_DMAR_Msk (0x1UL << USART_CR3_DMAR_Pos) /*!< 0x00000040 */ +#define USART_CR3_DMAR USART_CR3_DMAR_Msk /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT_Pos (7U) +#define USART_CR3_DMAT_Msk (0x1UL << USART_CR3_DMAT_Pos) /*!< 0x00000080 */ +#define USART_CR3_DMAT USART_CR3_DMAT_Msk /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE_Pos (8U) +#define USART_CR3_RTSE_Msk (0x1UL << USART_CR3_RTSE_Pos) /*!< 0x00000100 */ +#define USART_CR3_RTSE USART_CR3_RTSE_Msk /*!< RTS Enable */ +#define USART_CR3_CTSE_Pos (9U) +#define USART_CR3_CTSE_Msk (0x1UL << USART_CR3_CTSE_Pos) /*!< 0x00000200 */ +#define USART_CR3_CTSE USART_CR3_CTSE_Msk +#define USART_CR3_CTSIE_Pos (10U) +#define USART_CR3_CTSIE_Msk (0x1UL << USART_CR3_CTSIE_Pos) /*!< 0x00000400 */ +#define USART_CR3_CTSIE USART_CR3_CTSIE_Msk /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT_Pos (11U) +#define USART_CR3_ONEBIT_Msk (0x1UL << USART_CR3_ONEBIT_Pos) /*!< 0x00000800 */ +#define USART_CR3_ONEBIT USART_CR3_ONEBIT_Msk /*!< One sample bit method enable */ +#define USART_CR3_OVRDIS_Pos (12U) +#define USART_CR3_OVRDIS_Msk (0x1UL << USART_CR3_OVRDIS_Pos) /*!< 0x00001000 */ +#define USART_CR3_OVRDIS USART_CR3_OVRDIS_Msk /*!< Overrun Disable */ +#define USART_CR3_DDRE_Pos (13U) +#define USART_CR3_DDRE_Msk (0x1UL << USART_CR3_DDRE_Pos) /*!< 0x00002000 */ +#define USART_CR3_DDRE USART_CR3_DDRE_Msk /*!< DMA Disable on Reception Error */ +#define USART_CR3_DEM_Pos (14U) +#define USART_CR3_DEM_Msk (0x1UL << USART_CR3_DEM_Pos) /*!< 0x00004000 */ +#define USART_CR3_DEM USART_CR3_DEM_Msk /*!< Driver Enable Mode */ +#define USART_CR3_DEP_Pos (15U) +#define USART_CR3_DEP_Msk (0x1UL << USART_CR3_DEP_Pos) /*!< 0x00008000 */ +#define USART_CR3_DEP USART_CR3_DEP_Msk /*!< Driver Enable Polarity Selection */ +#define USART_CR3_SCARCNT_Pos (17U) +#define USART_CR3_SCARCNT_Msk (0x7UL << USART_CR3_SCARCNT_Pos) /*!< 0x000E0000 */ +#define USART_CR3_SCARCNT USART_CR3_SCARCNT_Msk /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */ +#define USART_CR3_SCARCNT_0 (0x1U << USART_CR3_SCARCNT_Pos) /*!< 0x00020000 */ +#define USART_CR3_SCARCNT_1 (0x2U << USART_CR3_SCARCNT_Pos) /*!< 0x00040000 */ +#define USART_CR3_SCARCNT_2 (0x4U << USART_CR3_SCARCNT_Pos) /*!< 0x00080000 */ +#define USART_CR3_WUS_Pos (20U) +#define USART_CR3_WUS_Msk (0x3UL << USART_CR3_WUS_Pos) /*!< 0x00300000 */ +#define USART_CR3_WUS USART_CR3_WUS_Msk /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */ +#define USART_CR3_WUS_0 (0x1U << USART_CR3_WUS_Pos) /*!< 0x00100000 */ +#define USART_CR3_WUS_1 (0x2U << USART_CR3_WUS_Pos) /*!< 0x00200000 */ +#define USART_CR3_WUFIE_Pos (22U) +#define USART_CR3_WUFIE_Msk (0x1UL << USART_CR3_WUFIE_Pos) /*!< 0x00400000 */ +#define USART_CR3_WUFIE USART_CR3_WUFIE_Msk /*!< Wake Up Interrupt Enable */ +#define USART_CR3_TXFTIE_Pos (23U) +#define USART_CR3_TXFTIE_Msk (0x1UL << USART_CR3_TXFTIE_Pos) /*!< 0x00800000 */ +#define USART_CR3_TXFTIE USART_CR3_TXFTIE_Msk /*!< TX FIFO Threshold Interrupt Enable */ +#define USART_CR3_TCBGTIE_Pos (24U) +#define USART_CR3_TCBGTIE_Msk (0x1UL << USART_CR3_TCBGTIE_Pos) /*!< 0x01000000 */ +#define USART_CR3_TCBGTIE USART_CR3_TCBGTIE_Msk /*!< Transmission Complete Before Guard Time Interrupt Enable */ +#define USART_CR3_RXFTCFG_Pos (25U) +#define USART_CR3_RXFTCFG_Msk (0x7UL << USART_CR3_RXFTCFG_Pos) /*!< 0x0E000000 */ +#define USART_CR3_RXFTCFG USART_CR3_RXFTCFG_Msk /*!< RX FIFO Threshold Configuration */ +#define USART_CR3_RXFTCFG_0 (0x1U << USART_CR3_RXFTCFG_Pos) /*!< 0x02000000 */ +#define USART_CR3_RXFTCFG_1 (0x2U << USART_CR3_RXFTCFG_Pos) /*!< 0x04000000 */ +#define USART_CR3_RXFTCFG_2 (0x4U << USART_CR3_RXFTCFG_Pos) /*!< 0x08000000 */ +#define USART_CR3_RXFTIE_Pos (28U) +#define USART_CR3_RXFTIE_Msk (0x1UL << USART_CR3_RXFTIE_Pos) /*!< 0x10000000 */ +#define USART_CR3_RXFTIE USART_CR3_RXFTIE_Msk /*!< RX FIFO Threshold Interrupt Enable */ +#define USART_CR3_TXFTCFG_Pos (29U) +#define USART_CR3_TXFTCFG_Msk (0x7UL << USART_CR3_TXFTCFG_Pos) /*!< 0xE0000000 */ +#define USART_CR3_TXFTCFG USART_CR3_TXFTCFG_Msk /*!< TX FIFO Threshold configuration */ +#define USART_CR3_TXFTCFG_0 (0x1U << USART_CR3_TXFTCFG_Pos) /*!< 0x20000000 */ +#define USART_CR3_TXFTCFG_1 (0x2U << USART_CR3_TXFTCFG_Pos) /*!< 0x40000000 */ +#define USART_CR3_TXFTCFG_2 (0x4U << USART_CR3_TXFTCFG_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_BRR ((uint16_t)0xFFFF) /*!< USART Baud rate register [15:0] */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC_Pos (0U) +#define USART_GTPR_PSC_Msk (0xFFUL << USART_GTPR_PSC_Pos) /*!< 0x000000FF */ +#define USART_GTPR_PSC USART_GTPR_PSC_Msk /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_GT_Pos (8U) +#define USART_GTPR_GT_Msk (0xFFUL << USART_GTPR_GT_Pos) /*!< 0x0000FF00 */ +#define USART_GTPR_GT USART_GTPR_GT_Msk /*!< GT[7:0] bits (Guard time value) */ + +/******************* Bit definition for USART_RTOR register *****************/ +#define USART_RTOR_RTO_Pos (0U) +#define USART_RTOR_RTO_Msk (0xFFFFFFUL << USART_RTOR_RTO_Pos) /*!< 0x00FFFFFF */ +#define USART_RTOR_RTO USART_RTOR_RTO_Msk /*!< Receiver Timeout Value */ +#define USART_RTOR_BLEN_Pos (24U) +#define USART_RTOR_BLEN_Msk (0xFFUL << USART_RTOR_BLEN_Pos) /*!< 0xFF000000 */ +#define USART_RTOR_BLEN USART_RTOR_BLEN_Msk /*!< Block Length */ + +/******************* Bit definition for USART_RQR register ******************/ +#define USART_RQR_ABRRQ_Pos (0U) +#define USART_RQR_ABRRQ_Msk (0x1UL << USART_RQR_ABRRQ_Pos) /*!< 0x00000001 */ +#define USART_RQR_ABRRQ USART_RQR_ABRRQ_Msk /*!< Auto-Baud Rate Request */ +#define USART_RQR_SBKRQ_Pos (1U) +#define USART_RQR_SBKRQ_Msk (0x1UL << USART_RQR_SBKRQ_Pos) /*!< 0x00000002 */ +#define USART_RQR_SBKRQ USART_RQR_SBKRQ_Msk /*!< Send Break Request */ +#define USART_RQR_MMRQ_Pos (2U) +#define USART_RQR_MMRQ_Msk (0x1UL << USART_RQR_MMRQ_Pos) /*!< 0x00000004 */ +#define USART_RQR_MMRQ USART_RQR_MMRQ_Msk /*!< Mute Mode Request */ +#define USART_RQR_RXFRQ_Pos (3U) +#define USART_RQR_RXFRQ_Msk (0x1UL << USART_RQR_RXFRQ_Pos) /*!< 0x00000008 */ +#define USART_RQR_RXFRQ USART_RQR_RXFRQ_Msk /*!< Receive Data flush Request */ +#define USART_RQR_TXFRQ_Pos (4U) +#define USART_RQR_TXFRQ_Msk (0x1UL << USART_RQR_TXFRQ_Pos) /*!< 0x00000010 */ +#define USART_RQR_TXFRQ USART_RQR_TXFRQ_Msk /*!< Transmit Data flush Request */ + +/******************* Bit definition for USART_ISR register ******************/ +#define USART_ISR_PE_Pos (0U) +#define USART_ISR_PE_Msk (0x1UL << USART_ISR_PE_Pos) /*!< 0x00000001 */ +#define USART_ISR_PE USART_ISR_PE_Msk /*!< Parity Error */ +#define USART_ISR_FE_Pos (1U) +#define USART_ISR_FE_Msk (0x1UL << USART_ISR_FE_Pos) /*!< 0x00000002 */ +#define USART_ISR_FE USART_ISR_FE_Msk /*!< Framing Error */ +#define USART_ISR_NE_Pos (2U) +#define USART_ISR_NE_Msk (0x1UL << USART_ISR_NE_Pos) /*!< 0x00000004 */ +#define USART_ISR_NE USART_ISR_NE_Msk /*!< START bit Noise Error detection Flag */ +#define USART_ISR_ORE_Pos (3U) +#define USART_ISR_ORE_Msk (0x1UL << USART_ISR_ORE_Pos) /*!< 0x00000008 */ +#define USART_ISR_ORE USART_ISR_ORE_Msk /*!< OverRun Error */ +#define USART_ISR_IDLE_Pos (4U) +#define USART_ISR_IDLE_Msk (0x1UL << USART_ISR_IDLE_Pos) /*!< 0x00000010 */ +#define USART_ISR_IDLE USART_ISR_IDLE_Msk /*!< IDLE line detected */ +#define USART_ISR_RXNE_Pos (5U) +#define USART_ISR_RXNE_Msk (0x1UL << USART_ISR_RXNE_Pos) /*!< 0x00000020 */ +#define USART_ISR_RXNE USART_ISR_RXNE_Msk /*!< Read Data Register Not Empty */ +#define USART_ISR_RXNE_RXFNE_Pos USART_ISR_RXNE_Pos +#define USART_ISR_RXNE_RXFNE_Msk USART_ISR_RXNE_Msk /*!< 0x00000020 */ +#define USART_ISR_RXNE_RXFNE USART_ISR_RXNE_Msk /*!< Read Data Register or RX FIFO Not Empty */ +#define USART_ISR_TC_Pos (6U) +#define USART_ISR_TC_Msk (0x1UL << USART_ISR_TC_Pos) /*!< 0x00000040 */ +#define USART_ISR_TC USART_ISR_TC_Msk /*!< Transmission Complete */ +#define USART_ISR_TXE_Pos (7U) +#define USART_ISR_TXE_Msk (0x1UL << USART_ISR_TXE_Pos) /*!< 0x00000080 */ +#define USART_ISR_TXE USART_ISR_TXE_Msk /*!< Transmit Data Register Empty */ +#define USART_ISR_TXE_TXFNF_Pos USART_ISR_TXE_Pos +#define USART_ISR_TXE_TXFNF_Msk USART_ISR_TXE_Msk /*!< 0x00000080 */ +#define USART_ISR_TXE_TXFNF USART_ISR_TXE_Msk /*!< Transmit Data Register Empty or TX FIFO Not Full Flag */ +#define USART_ISR_LBDF_Pos (8U) +#define USART_ISR_LBDF_Msk (0x1UL << USART_ISR_LBDF_Pos) /*!< 0x00000100 */ +#define USART_ISR_LBDF USART_ISR_LBDF_Msk /*!< LIN Break Detection Flag */ +#define USART_ISR_CTSIF_Pos (9U) +#define USART_ISR_CTSIF_Msk (0x1UL << USART_ISR_CTSIF_Pos) /*!< 0x00000200 */ +#define USART_ISR_CTSIF USART_ISR_CTSIF_Msk /*!< CTS interrupt Flag */ +#define USART_ISR_CTS_Pos (10U) +#define USART_ISR_CTS_Msk (0x1UL << USART_ISR_CTS_Pos) /*!< 0x00000400 */ +#define USART_ISR_CTS USART_ISR_CTS_Msk /*!< CTS Flag */ +#define USART_ISR_RTOF_Pos (11U) +#define USART_ISR_RTOF_Msk (0x1UL << USART_ISR_RTOF_Pos) /*!< 0x00000800 */ +#define USART_ISR_RTOF USART_ISR_RTOF_Msk /*!< Receiver Timeout */ +#define USART_ISR_EOBF_Pos (12U) +#define USART_ISR_EOBF_Msk (0x1UL << USART_ISR_EOBF_Pos) /*!< 0x00001000 */ +#define USART_ISR_EOBF USART_ISR_EOBF_Msk /*!< End Of Block Flag */ +#define USART_ISR_UDR_Pos (13U) +#define USART_ISR_UDR_Msk (0x1UL << USART_ISR_UDR_Pos) /*!< 0x00002000 */ +#define USART_ISR_UDR USART_ISR_UDR_Msk /*!< SPI Slave Underrun error Flag */ +#define USART_ISR_ABRE_Pos (14U) +#define USART_ISR_ABRE_Msk (0x1UL << USART_ISR_ABRE_Pos) /*!< 0x00004000 */ +#define USART_ISR_ABRE USART_ISR_ABRE_Msk /*!< Auto-Baud Rate Error */ +#define USART_ISR_ABRF_Pos (15U) +#define USART_ISR_ABRF_Msk (0x1UL << USART_ISR_ABRF_Pos) /*!< 0x00008000 */ +#define USART_ISR_ABRF USART_ISR_ABRF_Msk /*!< Auto-Baud Rate Flag */ +#define USART_ISR_BUSY_Pos (16U) +#define USART_ISR_BUSY_Msk (0x1UL << USART_ISR_BUSY_Pos) /*!< 0x00010000 */ +#define USART_ISR_BUSY USART_ISR_BUSY_Msk /*!< Busy Flag */ +#define USART_ISR_CMF_Pos (17U) +#define USART_ISR_CMF_Msk (0x1UL << USART_ISR_CMF_Pos) /*!< 0x00020000 */ +#define USART_ISR_CMF USART_ISR_CMF_Msk /*!< Character Match Flag */ +#define USART_ISR_SBKF_Pos (18U) +#define USART_ISR_SBKF_Msk (0x1UL << USART_ISR_SBKF_Pos) /*!< 0x00040000 */ +#define USART_ISR_SBKF USART_ISR_SBKF_Msk /*!< Send Break Flag */ +#define USART_ISR_RWU_Pos (19U) +#define USART_ISR_RWU_Msk (0x1UL << USART_ISR_RWU_Pos) /*!< 0x00080000 */ +#define USART_ISR_RWU USART_ISR_RWU_Msk /*!< Receive Wake Up from mute mode Flag */ +#define USART_ISR_WUF_Pos (20U) +#define USART_ISR_WUF_Msk (0x1UL << USART_ISR_WUF_Pos) /*!< 0x00100000 */ +#define USART_ISR_WUF USART_ISR_WUF_Msk /*!< Wake Up from stop mode Flag */ +#define USART_ISR_TEACK_Pos (21U) +#define USART_ISR_TEACK_Msk (0x1UL << USART_ISR_TEACK_Pos) /*!< 0x00200000 */ +#define USART_ISR_TEACK USART_ISR_TEACK_Msk /*!< Transmit Enable Acknowledge Flag */ +#define USART_ISR_REACK_Pos (22U) +#define USART_ISR_REACK_Msk (0x1UL << USART_ISR_REACK_Pos) /*!< 0x00400000 */ +#define USART_ISR_REACK USART_ISR_REACK_Msk /*!< Receive Enable Acknowledge Flag */ +#define USART_ISR_TXFE_Pos (23U) +#define USART_ISR_TXFE_Msk (0x1UL << USART_ISR_TXFE_Pos) /*!< 0x00800000 */ +#define USART_ISR_TXFE USART_ISR_TXFE_Msk /*!< TX FIFO Empty Flag */ +#define USART_ISR_RXFF_Pos (24U) +#define USART_ISR_RXFF_Msk (0x1UL << USART_ISR_RXFF_Pos) /*!< 0x01000000 */ +#define USART_ISR_RXFF USART_ISR_RXFF_Msk /*!< RX FIFO Full Flag */ +#define USART_ISR_TCBGT_Pos (25U) +#define USART_ISR_TCBGT_Msk (0x1UL << USART_ISR_TCBGT_Pos) /*!< 0x02000000 */ +#define USART_ISR_TCBGT USART_ISR_TCBGT_Msk /*!< Transmission Complete Before Guard Time completion */ +#define USART_ISR_RXFT_Pos (26U) +#define USART_ISR_RXFT_Msk (0x1UL << USART_ISR_RXFT_Pos) /*!< 0x04000000 */ +#define USART_ISR_RXFT USART_ISR_RXFT_Msk /*!< RX FIFO Threshold Flag */ +#define USART_ISR_TXFT_Pos (27U) +#define USART_ISR_TXFT_Msk (0x1UL << USART_ISR_TXFT_Pos) /*!< 0x08000000 */ +#define USART_ISR_TXFT USART_ISR_TXFT_Msk /*!< TX FIFO Threshold Flag */ + +/******************* Bit definition for USART_ICR register ******************/ +#define USART_ICR_PECF_Pos (0U) +#define USART_ICR_PECF_Msk (0x1UL << USART_ICR_PECF_Pos) /*!< 0x00000001 */ +#define USART_ICR_PECF USART_ICR_PECF_Msk /*!< Parity Error Clear Flag */ +#define USART_ICR_FECF_Pos (1U) +#define USART_ICR_FECF_Msk (0x1UL << USART_ICR_FECF_Pos) /*!< 0x00000002 */ +#define USART_ICR_FECF USART_ICR_FECF_Msk /*!< Framing Error Clear Flag */ +#define USART_ICR_NECF_Pos (2U) +#define USART_ICR_NECF_Msk (0x1UL << USART_ICR_NECF_Pos) /*!< 0x00000004 */ +#define USART_ICR_NECF USART_ICR_NECF_Msk /*!< Noise Error detected Clear Flag */ +#define USART_ICR_ORECF_Pos (3U) +#define USART_ICR_ORECF_Msk (0x1UL << USART_ICR_ORECF_Pos) /*!< 0x00000008 */ +#define USART_ICR_ORECF USART_ICR_ORECF_Msk /*!< OverRun Error Clear Flag */ +#define USART_ICR_IDLECF_Pos (4U) +#define USART_ICR_IDLECF_Msk (0x1UL << USART_ICR_IDLECF_Pos) /*!< 0x00000010 */ +#define USART_ICR_IDLECF USART_ICR_IDLECF_Msk /*!< IDLE line detected Clear Flag */ +#define USART_ICR_TXFECF_Pos (5U) +#define USART_ICR_TXFECF_Msk (0x1UL << USART_ICR_TXFECF_Pos) /*!< 0x00000020 */ +#define USART_ICR_TXFECF USART_ICR_TXFECF_Msk /*!< TX FIFO Empty Clear Flag */ +#define USART_ICR_TCCF_Pos (6U) +#define USART_ICR_TCCF_Msk (0x1UL << USART_ICR_TCCF_Pos) /*!< 0x00000040 */ +#define USART_ICR_TCCF USART_ICR_TCCF_Msk /*!< Transmission Complete Clear Flag */ +#define USART_ICR_TCBGTCF_Pos (7U) +#define USART_ICR_TCBGTCF_Msk (0x1UL << USART_ICR_TCBGTCF_Pos) /*!< 0x00000080 */ +#define USART_ICR_TCBGTCF USART_ICR_TCBGTCF_Msk /*!< Transmission Complete Before Guard Time Clear Flag */ +#define USART_ICR_LBDCF_Pos (8U) +#define USART_ICR_LBDCF_Msk (0x1UL << USART_ICR_LBDCF_Pos) /*!< 0x00000100 */ +#define USART_ICR_LBDCF USART_ICR_LBDCF_Msk /*!< LIN Break Detection Clear Flag */ +#define USART_ICR_CTSCF_Pos (9U) +#define USART_ICR_CTSCF_Msk (0x1UL << USART_ICR_CTSCF_Pos) /*!< 0x00000200 */ +#define USART_ICR_CTSCF USART_ICR_CTSCF_Msk /*!< CTS Interrupt Clear Flag */ +#define USART_ICR_RTOCF_Pos (11U) +#define USART_ICR_RTOCF_Msk (0x1UL << USART_ICR_RTOCF_Pos) /*!< 0x00000800 */ +#define USART_ICR_RTOCF USART_ICR_RTOCF_Msk /*!< Receiver Time Out Clear Flag */ +#define USART_ICR_EOBCF_Pos (12U) +#define USART_ICR_EOBCF_Msk (0x1UL << USART_ICR_EOBCF_Pos) /*!< 0x00001000 */ +#define USART_ICR_EOBCF USART_ICR_EOBCF_Msk /*!< End Of Block Clear Flag */ +#define USART_ICR_UDRCF_Pos (13U) +#define USART_ICR_UDRCF_Msk (0x1UL << USART_ICR_UDRCF_Pos) /*!< 0x00002000 */ +#define USART_ICR_UDRCF USART_ICR_UDRCF_Msk /*!< SPI Slave Underrun Clear Flag */ +#define USART_ICR_CMCF_Pos (17U) +#define USART_ICR_CMCF_Msk (0x1UL << USART_ICR_CMCF_Pos) /*!< 0x00020000 */ +#define USART_ICR_CMCF USART_ICR_CMCF_Msk /*!< Character Match Clear Flag */ +#define USART_ICR_WUCF_Pos (20U) +#define USART_ICR_WUCF_Msk (0x1UL << USART_ICR_WUCF_Pos) /*!< 0x00100000 */ +#define USART_ICR_WUCF USART_ICR_WUCF_Msk /*!< Wake Up from stop mode Clear Flag */ + +/******************* Bit definition for USART_RDR register ******************/ +#define USART_RDR_RDR_Pos (0U) +#define USART_RDR_RDR_Msk (0x01FFUL << USART_RDR_RDR_Pos) /*!< 0x000001FF */ +#define USART_RDR_RDR USART_RDR_RDR_Msk /*!< RDR[8:0] bits (Receive Data value) */ + +/******************* Bit definition for USART_TDR register ******************/ +#define USART_TDR_TDR_Pos (0U) +#define USART_TDR_TDR_Msk (0x01FFUL << USART_TDR_TDR_Pos) /*!< 0x000001FF */ +#define USART_TDR_TDR USART_TDR_TDR_Msk /*!< TDR[8:0] bits (Transmit Data value) */ + +/******************* Bit definition for USART_PRESC register ******************/ +#define USART_PRESC_PRESCALER_Pos (0U) +#define USART_PRESC_PRESCALER_Msk (0xFUL << USART_PRESC_PRESCALER_Pos) /*!< 0x0000000F */ +#define USART_PRESC_PRESCALER USART_PRESC_PRESCALER_Msk /*!< PRESCALER[3:0] bits (Clock prescaler) */ +#define USART_PRESC_PRESCALER_0 (0x1U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000001 */ +#define USART_PRESC_PRESCALER_1 (0x2U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000002 */ +#define USART_PRESC_PRESCALER_2 (0x4U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000004 */ +#define USART_PRESC_PRESCALER_3 (0x8U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000008 */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T_Pos (0U) +#define WWDG_CR_T_Msk (0x7FUL << WWDG_CR_T_Pos) /*!< 0x0000007F */ +#define WWDG_CR_T WWDG_CR_T_Msk /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T_0 (0x01U << WWDG_CR_T_Pos) /*!< 0x00000001 */ +#define WWDG_CR_T_1 (0x02U << WWDG_CR_T_Pos) /*!< 0x00000002 */ +#define WWDG_CR_T_2 (0x04U << WWDG_CR_T_Pos) /*!< 0x00000004 */ +#define WWDG_CR_T_3 (0x08U << WWDG_CR_T_Pos) /*!< 0x00000008 */ +#define WWDG_CR_T_4 (0x10U << WWDG_CR_T_Pos) /*!< 0x00000010 */ +#define WWDG_CR_T_5 (0x20U << WWDG_CR_T_Pos) /*!< 0x00000020 */ +#define WWDG_CR_T_6 (0x40U << WWDG_CR_T_Pos) /*!< 0x00000040 */ + +#define WWDG_CR_WDGA_Pos (7U) +#define WWDG_CR_WDGA_Msk (0x1UL << WWDG_CR_WDGA_Pos) /*!< 0x00000080 */ +#define WWDG_CR_WDGA WWDG_CR_WDGA_Msk /*!<Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W_Pos (0U) +#define WWDG_CFR_W_Msk (0x7FUL << WWDG_CFR_W_Pos) /*!< 0x0000007F */ +#define WWDG_CFR_W WWDG_CFR_W_Msk /*!<W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W_0 (0x01U << WWDG_CFR_W_Pos) /*!< 0x00000001 */ +#define WWDG_CFR_W_1 (0x02U << WWDG_CFR_W_Pos) /*!< 0x00000002 */ +#define WWDG_CFR_W_2 (0x04U << WWDG_CFR_W_Pos) /*!< 0x00000004 */ +#define WWDG_CFR_W_3 (0x08U << WWDG_CFR_W_Pos) /*!< 0x00000008 */ +#define WWDG_CFR_W_4 (0x10U << WWDG_CFR_W_Pos) /*!< 0x00000010 */ +#define WWDG_CFR_W_5 (0x20U << WWDG_CFR_W_Pos) /*!< 0x00000020 */ +#define WWDG_CFR_W_6 (0x40U << WWDG_CFR_W_Pos) /*!< 0x00000040 */ + +#define WWDG_CFR_WDGTB_Pos (11U) +#define WWDG_CFR_WDGTB_Msk (0x7UL << WWDG_CFR_WDGTB_Pos) /*!< 0x00003800 */ +#define WWDG_CFR_WDGTB WWDG_CFR_WDGTB_Msk /*!<WDGTB[2:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB_0 (0x1U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000800 */ +#define WWDG_CFR_WDGTB_1 (0x2U << WWDG_CFR_WDGTB_Pos) /*!< 0x00001000 */ +#define WWDG_CFR_WDGTB_2 (0x4U << WWDG_CFR_WDGTB_Pos) /*!< 0x00002000 */ + +#define WWDG_CFR_EWI_Pos (9U) +#define WWDG_CFR_EWI_Msk (0x1UL << WWDG_CFR_EWI_Pos) /*!< 0x00000200 */ +#define WWDG_CFR_EWI WWDG_CFR_EWI_Msk /*!<Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF_Pos (0U) +#define WWDG_SR_EWIF_Msk (0x1UL << WWDG_SR_EWIF_Pos) /*!< 0x00000001 */ +#define WWDG_SR_EWIF WWDG_SR_EWIF_Msk /*!<Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ +/******************** Bit definition for DBGMCU_IDCODE register *************/ +#define DBGMCU_IDCODE_DEV_ID_Pos (0U) +#define DBGMCU_IDCODE_DEV_ID_Msk (0xFFFUL << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ +#define DBGMCU_IDCODE_DEV_ID DBGMCU_IDCODE_DEV_ID_Msk +#define DBGMCU_IDCODE_REV_ID_Pos (16U) +#define DBGMCU_IDCODE_REV_ID_Msk (0xFFFFUL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ +#define DBGMCU_IDCODE_REV_ID DBGMCU_IDCODE_REV_ID_Msk + +/******************** Bit definition for DBGMCU_CR register *****************/ +#define DBGMCU_CR_DBG_SLEEP_Pos (0U) +#define DBGMCU_CR_DBG_SLEEP_Msk (0x1UL << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */ +#define DBGMCU_CR_DBG_SLEEP DBGMCU_CR_DBG_SLEEP_Msk +#define DBGMCU_CR_DBG_STOP_Pos (1U) +#define DBGMCU_CR_DBG_STOP_Msk (0x1UL << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */ +#define DBGMCU_CR_DBG_STOP DBGMCU_CR_DBG_STOP_Msk +#define DBGMCU_CR_DBG_STANDBY_Pos (2U) +#define DBGMCU_CR_DBG_STANDBY_Msk (0x1UL << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ +#define DBGMCU_CR_DBG_STANDBY DBGMCU_CR_DBG_STANDBY_Msk +#define DBGMCU_CR_TRACE_IOEN_Pos (5U) +#define DBGMCU_CR_TRACE_IOEN_Msk (0x1UL << DBGMCU_CR_TRACE_IOEN_Pos) /*!< 0x00000020 */ +#define DBGMCU_CR_TRACE_IOEN DBGMCU_CR_TRACE_IOEN_Msk +#define DBGMCU_CR_TRGOEN_Pos (28U) +#define DBGMCU_CR_TRGOEN_Msk (0x1UL << DBGMCU_CR_TRGOEN_Pos) /*!< 0x10000000 */ +#define DBGMCU_CR_TRGOEN DBGMCU_CR_TRGOEN_Msk + +/******************** Bit definition for DBGMCU_APB1FZR1 register ***********/ +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP_Pos (0U) +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */ +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP DBGMCU_APB1FZR1_DBG_TIM2_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_RTC_STOP_Pos (10U) +#define DBGMCU_APB1FZR1_DBG_RTC_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBGMCU_APB1FZR1_DBG_RTC_STOP DBGMCU_APB1FZR1_DBG_RTC_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP_Pos (11U) +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */ +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP_Pos (12U) +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP_Pos (21U) +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */ +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Pos (31U) +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Pos) /*!< 0x80000000 */ +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB1FZR1 register ***********/ +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Pos (0U) +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */ +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Pos (10U) +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Pos (12U) +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Pos (21U) +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */ +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Pos (31U) +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Pos) /*!< 0x80000000 */ +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_APB1FZR2 register ***********/ +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Pos (5U) +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Msk (0x1UL << DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Pos) /*!< 0x00000020 */ +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB1FZR2 register ***********/ +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Pos (5U) +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Pos) /*!< 0x00000020 */ +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Msk + +/******************** Bit definition for DBGMCU_APB2FZR register ************/ +#define DBGMCU_APB2FZR_DBG_TIM1_STOP_Pos (11U) +#define DBGMCU_APB2FZR_DBG_TIM1_STOP_Msk (0x1UL << DBGMCU_APB2FZR_DBG_TIM1_STOP_Pos) /*!< 0x000000800 */ +#define DBGMCU_APB2FZR_DBG_TIM1_STOP DBGMCU_APB2FZR_DBG_TIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB2FZR register ************/ +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Pos (11U) +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Msk (0x1UL << DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Pos) /*!< 0x000000800 */ +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Msk + +/** @addtogroup Exported_macros + * @{ + */ + + +/*********************** UART Instances : Asynchronous mode *******************/ +#define IS_UART_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : FIFO mode ***************************/ +#define IS_UART_FIFO_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : SPI Slave mode **********************/ +#define IS_UART_SPI_SLAVE_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** USART Instances : Synchronous mode *******************/ +#define IS_USART_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** USART Instances : Auto Baud Rate detection ***********/ + +#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Half-Duplex mode ********************/ +#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : LIN mode ****************************/ +#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Wake-up from Stop mode **************/ +#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Hardware Flow control ***************/ +#define IS_UART_HWFLOW_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Smard card mode *********************/ +#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Driver Enable ***********************/ +#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : IRDA mode ***************************/ +#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/******************** LPUART Instance *****************************************/ +#define IS_LPUART_INSTANCE(INSTANCE) (0) + +/******************************* ADC Instances ********************************/ +#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) + +#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC1_COMMON) + +/******************************* AES Instances ********************************/ +#define IS_AES_ALL_INSTANCE(INSTANCE) ((INSTANCE) == AES2) + +/******************************* CRC Instances ********************************/ +#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC) + +/******************************** DMA Instances *******************************/ +#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \ + ((INSTANCE) == DMA1_Channel2) || \ + ((INSTANCE) == DMA1_Channel3) || \ + ((INSTANCE) == DMA1_Channel4) || \ + ((INSTANCE) == DMA1_Channel5) || \ + ((INSTANCE) == DMA1_Channel6) || \ + ((INSTANCE) == DMA1_Channel7)) + +/******************************** DMAMUX Instances ****************************/ +#define IS_DMAMUX_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DMAMUX1) + +#define IS_DMAMUX_REQUEST_GEN_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMAMUX1_RequestGenerator0) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator1) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator2) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator3)) + +/******************************* GPIO Instances *******************************/ +#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ + ((INSTANCE) == GPIOB) || \ + ((INSTANCE) == GPIOC) || \ + ((INSTANCE) == GPIOE) || \ + ((INSTANCE) == GPIOH)) + +/******************************* GPIO AF Instances ****************************/ +#define IS_GPIO_AF_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) + +/**************************** GPIO Lock Instances *****************************/ +#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) + +/******************************** I2C Instances *******************************/ +#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1) + +/****************** I2C Instances : wakeup capability from stop modes *********/ +#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE) + +/******************************* SMBUS Instances ******************************/ +#define IS_SMBUS_ALL_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE) + +/******************************* IPCC Instances ********************************/ +#define IS_IPCC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IPCC) + +/******************************** HSEM Instances *******************************/ +#define IS_HSEM_ALL_INSTANCE(INSTANCE) ((INSTANCE) == HSEM) + +#define HSEM_CPU1_COREID (0x00000004UL)/* Semaphore Core ID */ +#define HSEM_CPU2_COREID (0x00000008UL)/* Semaphore Core ID */ + +#define HSEM_SEMID_MIN (0U) /* HSEM ID Min*/ +#define HSEM_SEMID_MAX (31U) /* HSEM ID Max */ + +#define HSEM_PROCESSID_MIN (0U) /* HSEM Process ID Min */ +#define HSEM_PROCESSID_MAX (255U) /* HSEM Process ID Max */ + +#define HSEM_CLEAR_KEY_MIN (0U) /* HSEM clear Key Min value */ +#define HSEM_CLEAR_KEY_MAX (0xFFFFU) /* HSEM clear Key Max value */ + +/******************************** PKA Instances *******************************/ +#define IS_PKA_ALL_INSTANCE(INSTANCE) ((INSTANCE) == PKA) + +/******************************* RNG Instances ********************************/ +#define IS_RNG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RNG) + +/****************************** RTC Instances *********************************/ +#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC) + +/******************************** SPI Instances *******************************/ +#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1) + +/****************** LPTIM Instances : All supported instances *****************/ +#define IS_LPTIM_INSTANCE(INSTANCE) (((INSTANCE) == LPTIM1) || \ + ((INSTANCE) == LPTIM2)) + +/****************** LPTIM Instances : Encoder mode ****************************/ +#define IS_LPTIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) ((INSTANCE) == LPTIM1) + +/****************** TIM Instances : All supported instances *******************/ +#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************************** IWDG Instances ********************************/ +#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG) + +/****************************** WWDG Instances ********************************/ +#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG) + +/****************** TIM Instances : supporting 32 bits counter ****************/ +#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) + +/****************** TIM Instances : supporting the break function *************/ +#define IS_TIM_BREAK_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************** TIM Instances : supporting Break source selection *************/ +#define IS_TIM_BREAKSOURCE_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting 2 break inputs *****************/ +#define IS_TIM_BKIN2_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************* TIM Instances : at least 1 capture/compare channel *************/ +#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 2 capture/compare channels *************/ +#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 3 capture/compare channels *************/ +#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 4 capture/compare channels *************/ +#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : at least 5 capture/compare channels *******/ +#define IS_TIM_CC5_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : at least 6 capture/compare channels *******/ +#define IS_TIM_CC6_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************ TIM Instances : DMA requests generation (TIMx_DIER.COMDE) *******/ +#define IS_TIM_CCDMA_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : DMA requests generation (TIMx_DIER.UDE) ***/ +#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : DMA requests generation (TIMx_DIER.CCxDE) *******/ +#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************** TIM Instances : DMA burst feature ***********************/ +#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************* TIM Instances : Timer input selection ********************/ +#define IS_TIM_TISEL_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************* TIM Instances : output(s) available **********************/ +#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \ + ((((INSTANCE) == TIM1) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4) || \ + ((CHANNEL) == TIM_CHANNEL_5) || \ + ((CHANNEL) == TIM_CHANNEL_6))) \ + || \ + (((INSTANCE) == TIM2) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4)))) + +/****************** TIM Instances : supporting complementary output(s) ********/ +#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \ + (((INSTANCE) == TIM1) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3))) + +/****************** TIM Instances : supporting clock division *****************/ +#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : supporting external clock mode 1 for ETRF input *******/ +#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : supporting external clock mode 2 for ETRF input *******/ +#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/ +#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/ +#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting combined 3-phase PWM mode ******/ +#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting commutation event generation ***/ +#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting counting mode selection ********/ +#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting encoder interface **************/ +#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting Hall sensor interface **********/ +#define IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/**************** TIM Instances : external trigger input available ************/ +#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************* TIM Instances : supporting ETR source selection ***************/ +#define IS_TIM_ETRSEL_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : Master mode available (TIMx_CR2.MMS available )********/ +#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/ +#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting OCxREF clear *******************/ +#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : remapping capability **********************/ +#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting repetition counter *************/ +#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/ +#define IS_TIM_TRGO2_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/******************* TIM Instances : Timer input XOR function *****************/ +#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : Advanced timers ********************************/ +#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) (((INSTANCE) == TIM1)) + +/****************************** TSC Instances *********************************/ +#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC) + +/** + * @} + */ + + /** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32WB10xx_H */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb15xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb15xx.h new file mode 100644 index 0000000000..07bf32e9db --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb15xx.h @@ -0,0 +1,10986 @@ +/** + ****************************************************************************** + * @file stm32wb15xx.h + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32wb15xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32wb15xx + * @{ + */ + +#ifndef __STM32WB15xx_H +#define __STM32WB15xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 1U /*!< Core Revision r0p1 */ +#define __MPU_PRESENT 1U /*!< M4 provides an MPU */ +#define __VTOR_PRESENT 1U /*!< Vector Table Register supported */ +#define __NVIC_PRIO_BITS 4U /*!< STM32WBxx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief stm32wb15xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +/*!< Interrupt Number Definition for M4 */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< Cortex-M4 System Tick Interrupt */ + +/************* STM32WBxx specific Interrupt Numbers on M4 core ************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD and PVM detector */ + TAMP_STAMP_LSECSS_IRQn = 2, /*!< RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Interrupt */ + FLASH_IRQn = 4, /*!< FLASH (CFI) global Interrupt */ + RCC_IRQn = 5, /*!< RCC Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line 0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line 1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line 2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line 3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line 4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 Interrupt */ + C2SEV_PWR_C2H_IRQn = 21, /*!< CPU2 SEV Interrupt */ + COMP_IRQn = 22, /*!< COMP1 Interrupt */ + EXTI9_5_IRQn = 23, /*!< EXTI Lines [9:5] Interrupt */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Communication Interrupts */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 Global Interrupt */ + PKA_IRQn = 29, /*!< PKA Interrupt */ + I2C1_EV_IRQn = 30, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 31, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 34, /*!< SPI1 Interrupt */ + USART1_IRQn = 36, /*!< USART1 Interrupt */ + LPUART1_IRQn = 37, /*!< LPUART1 Interrupt */ + TSC_IRQn = 39, /*!< TSC Interrupt */ + EXTI15_10_IRQn = 40, /*!< EXTI Lines1[15:10 ]Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarms (A and B) Interrupt */ + PWR_SOTF_BLEACT_RFPHASE_IRQn = 43, /*!< PWR switching on the fly interrupt + PWR end of BLE activity interrupt + PWR end of critical radio phase interrupt */ + IPCC_C1_RX_IRQn = 44, /*!< IPCC RX Occupied Interrupt */ + IPCC_C1_TX_IRQn = 45, /*!< IPCC TX Free Interrupt */ + HSEM_IRQn = 46, /*!< HSEM Interrupt */ + LPTIM1_IRQn = 47, /*!< LPTIM1 Interrupt */ + LPTIM2_IRQn = 48, /*!< LPTIM2 Interrupt */ + AES2_IRQn = 52, /*!< AES2 Interrupt */ + RNG_IRQn = 53, /*!< RNG Interrupt */ + FPU_IRQn = 54, /*!< FPU Interrupt */ + DMAMUX1_OVR_IRQn = 62 /*!< DMAMUX1 overrun Interrupt */ +} IRQn_Type; +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32wbxx.h" +#include <stdint.h> + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR1; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR; /*!< ADC sampling time register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x24 */ + __IO uint32_t CHSELR; /*!< ADC group regular sequencer register, Address offset: 0x28 */ + __IO uint32_t RESERVED4; /*!< Reserved, 0x2C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x30 - 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED6[23];/*!< Reserved, 0x44 - 0x9C */ + __IO uint32_t RESERVED7; /*!< Reserved, 0xA0 */ + __IO uint32_t RESERVED8; /*!< Reserved, 0xA4 */ + uint32_t RESERVED9[3]; /*!< Reserved, 0xA8 - 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration factor register, Address offset: 0xB4 */ +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +/** + * @brief CRC calculation unit + */ +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x08-0x38 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x3C */ + __IO uint32_t C2APB1FZR1; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU CPU1 APB1 freeze register, Address offset: 0x44 */ + __IO uint32_t C2APB1FZR2; /*!< Debug MCU CPU2 APB1 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZR; /*!< Debug MCU CPU1 APB2 freeze register, Address offset: 0x4C */ + __IO uint32_t C2APB2FZR; /*!< Debug MCU CPU2 APB2 freeze register, Address offset: 0x50 */ +} DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register 0x00 */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register 0x04 */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register 0x08 */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register 0x0C */ + uint32_t RESERVED; /*!< Reserved, 0x10 */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief DMA Multiplexer + */ +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register Address offset: 0x0080 */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register Address offset: 0x0084 */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register Address offset: 0x0100 + 0x0004 * (Req Gen x) */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register Address offset: 0x0140 */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register Address offset: 0x0144 */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH Access control register, Address offset: 0x00 */ + __IO uint32_t RESERVED; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH Key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH Option Key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH Status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH Control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH Option register, Address offset: 0x20 */ + __IO uint32_t PCROP1ASR; /*!< FLASH Bank 1 PCROP area A Start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1AER; /*!< FLASH Bank 1 PCROP area A End address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH Bank 1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH Bank 1 WRP area B address register, Address offset: 0x30 */ + __IO uint32_t PCROP1BSR; /*!< FLASH Bank 1 PCROP area B Start address register, Address offset: 0x34 */ + __IO uint32_t PCROP1BER; /*!< FLASH Bank 1 PCROP area B End address register, Address offset: 0x38 */ + __IO uint32_t IPCCBR; /*!< FLASH IPCC data buffer address, Address offset: 0x3C */ + uint32_t RESERVED2[7]; /*!< Reserved, Address offset: 0x40-0x58 */ + __IO uint32_t C2ACR; /*!< FLASH Core MO+ Access Control Register , Address offset: 0x5C */ + __IO uint32_t C2SR; /*!< FLASH Core MO+ Status Register, Address offset: 0x60 */ + __IO uint32_t C2CR; /*!< FLASH Core MO+ Control register, Address offset: 0x64 */ + uint32_t RESERVED3[6]; /*!< Reserved, Address offset: 0x68-0x7C */ + __IO uint32_t SFR; /*!< FLASH secure start address, Address offset: 0x80 */ + __IO uint32_t SRRVR; /*!< FlASH secure SRAM2 start addr and CPU2 reset vector Address offset: 0x84 */ +} FLASH_TypeDef; + +/** + * @brief General Purpose I/O + */ +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Power Control + */ +typedef struct +{ + __IO uint32_t CR1; /*!< PWR Power Control Register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR Power Control Register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR Power Control Register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR Power Control Register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR Power Status Register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR Power Status Register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR Power Status Reset Register, Address offset: 0x18 */ + __IO uint32_t CR5; /*!< PWR Power Control Register 5, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< PWR Pull-Up Control Register of port A, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< PWR Pull-Down Control Register of port A, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< PWR Pull-Up Control Register of port B, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< PWR Pull-Down Control Register of port B, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< PWR Pull-Up Control Register of port C, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< PWR Pull-Down Control Register of port C, Address offset: 0x34 */ + uint32_t RESERVED2[2]; /*!< Reserved, Address offset: 0x38-0x3C */ + __IO uint32_t PUCRE; /*!< PWR Pull-Up Control Register of port E, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< PWR Pull-Down Control Register of port E, Address offset: 0x44 */ + uint32_t RESERVED0[4]; /*!< Reserved, Address offset: 0x48-0x54 */ + __IO uint32_t PUCRH; /*!< PWR Pull-Up Control Register of port H, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< PWR Pull-Down Control Register of port H, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, Address offset: 0x60-0x7C */ + __IO uint32_t C2CR1; /*!< PWR Power Control Register 1 for CPU2, Address offset: 0x80 */ + __IO uint32_t C2CR3; /*!< PWR Power Control Register 3 for CPU2, Address offset: 0x84 */ + __IO uint32_t EXTSCR; /*!< PWR Power Status Reset Register for CPU2, Address offset: 0x88 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock Control Register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal Clock Sources Calibration Register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clocks Configuration Register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC System PLL configuration Register, Address offset: 0x0C */ +uint32_t RESERVED0[2]; /*!< Reserved, Address offset: 0x10-0x14 */ + __IO uint32_t CIER; /*!< RCC Clock Interrupt Enable Register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC Clock Interrupt Flag Register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC Clock Interrupt Clear Register, Address offset: 0x20 */ + __IO uint32_t SMPSCR; /*!< RCC SMPS step-down converter control register, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 & AHB4 peripheral reset register, Address offset: 0x30 */ +uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable register, Address offset: 0x50 */ +uint32_t RESERVED2; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ +uint32_t RESERVED3; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ +uint32_t RESERVED4; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ +uint32_t RESERVED5; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC Peripherals Clock Configuration Independent Register, Address offset: 0x88 */ +uint32_t RESERVED6; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC Backup Domain Control Register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC Control and Status Register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC Clock Recovery RC Register, Address offset: 0x98 */ + __IO uint32_t HSECR; /*!< RCC HSE Clock Register, Address offset: 0x9C */ +uint32_t RESERVED7[26]; /*!< Reserved, Address offset: 0xA0-0x104 */ + __IO uint32_t EXTCFGR; /*!< RCC Extended Clock Recovery Register, Address offset: 0x108 */ +uint32_t RESERVED8[15]; /*!< Reserved, Address offset: 0x10C-0x144 */ + __IO uint32_t C2AHB1ENR; /*!< RRCC AHB1 peripheral CPU2 clocks enable register, Address offset: 0x148 */ + __IO uint32_t C2AHB2ENR; /*!< RCC AHB2 peripheral CPU2 clocks enable register, Address offset: 0x14C */ + __IO uint32_t C2AHB3ENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable register,, Address offset: 0x150 */ +uint32_t RESERVED9; /*!< Reserved, Address offset: 0x154 */ + __IO uint32_t C2APB1ENR1; /*!< RCC APB1 peripheral CPU2 clocks enable register 1, Address offset: 0x158 */ + __IO uint32_t C2APB1ENR2; /*!< RCC APB1 peripheral CPU2 clocks enable register 2, Address offset: 0x15C */ + __IO uint32_t C2APB2ENR; /*!< RCC APB2 peripheral CPU2 clocks enable register 1, Address offset: 0x160 */ + __IO uint32_t C2APB3ENR; /*!< RCC APB3 peripheral CPU2 clocks enable register 1, Address offset: 0x164 */ + __IO uint32_t C2AHB1SMENR; /*!< RCC AHB1 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x168 */ + __IO uint32_t C2AHB2SMENR; /*!< RCC AHB2 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x16C */ + __IO uint32_t C2AHB3SMENR; /*!< RCC AHB3 & AHB4 peripheral CPU2 clocks enable in sleep and stop modes register, Address offset: 0x170 */ +uint32_t RESERVED10; /*!< Reserved, */ + __IO uint32_t C2APB1SMENR1; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 1, Address offset: 0x178 */ + __IO uint32_t C2APB1SMENR2; /*!< RCC APB1 peripheral CPU2 clocks enable in sleep mode and stop modes register 2, Address offset: 0x17C */ + __IO uint32_t C2APB2SMENR; /*!< RCC APB2 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x180 */ + __IO uint32_t C2APB3SMENR; /*!< RCC APB3 peripheral CPU2 clocks enable in sleep mode and stop modes register, Address offset: 0x184 */ +} RCC_TypeDef; + + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ +} RTC_TypeDef; + + + + +/** + * @brief Serial Peripheral Interface + */ +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + +/** + * @brief System configuration controller + */ +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR1; /*!< SYSCFG SRAM2 write protection register part 1, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ + __IO uint32_t SWPR2; /*!< SYSCFG write protection register part 2, Address offset: 0x28 */ + uint32_t RESERVED1[53]; /*!< Reserved, Address offset: 0x2C-0xFC */ + __IO uint32_t IMR1; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 1, Address offset: 0x100 */ + __IO uint32_t IMR2; /*!< SYSCFG CPU1 (CORTEX M4) interrupt masks control-status register part 2, Address offset: 0x104 */ + __IO uint32_t C2IMR1; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 1, Address offset: 0x108 */ + __IO uint32_t C2IMR2; /*!< SYSCFG CPU2 (CORTEX M0) interrupt masks control-status register part 2, Address offset: 0x10C */ + __IO uint32_t SIPCR; /*!< SYSCFG secure IP control register, Address offset: 0x110 */ + +} SYSCFG_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM Alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM Alternate function option register 2, Address offset: 0x64 */ +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; + +/** + * @brief RNG + */ +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief Touch Sensing Controller (TSC) + */ +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */ +} TSC_TypeDef; + +/** + * @brief Inter-Processor Communication + */ +typedef struct +{ + __IO uint32_t C1CR; /*!< Inter-Processor Communication: C1 control register, Address offset: 0x000 */ + __IO uint32_t C1MR ; /*!< Inter-Processor Communication: C1 mask register, Address offset: 0x004 */ + __IO uint32_t C1SCR; /*!< Inter-Processor Communication: C1 status set clear register, Address offset: 0x008 */ + __IO uint32_t C1TOC2SR; /*!< Inter-Processor Communication: C1 to processor M4 status register, Address offset: 0x00C */ + __IO uint32_t C2CR; /*!< Inter-Processor Communication: C2 control register, Address offset: 0x010 */ + __IO uint32_t C2MR ; /*!< Inter-Processor Communication: C2 mask register, Address offset: 0x014 */ + __IO uint32_t C2SCR; /*!< Inter-Processor Communication: C2 status set clear register, Address offset: 0x018 */ + __IO uint32_t C2TOC1SR; /*!< Inter-Processor Communication: C2 to processor M4 status register, Address offset: 0x01C */ +} IPCC_TypeDef; + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x000 */ + __IO uint32_t MR; /*!< Mask register, Address offset: 0x004 */ + __IO uint32_t SCR; /*!< Status set clear register, Address offset: 0x008 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x00C */ +} IPCC_CommonTypeDef; + +/** + * @brief Async Interrupts and Events Controller + */ +typedef struct +{ + __IO uint32_t RTSR1; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x00 */ + __IO uint32_t FTSR1; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x04 */ + __IO uint32_t SWIER1; /*!< EXTI software interrupt event register [31:0], Address offset: 0x08 */ + __IO uint32_t PR1; /*!< EXTI pending register [31:0], Address offset: 0x0C */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x10 - 0x1C */ + __IO uint32_t RTSR2; /*!< EXTI rising trigger selection register [31:0], Address offset: 0x20 */ + __IO uint32_t FTSR2; /*!< EXTI falling trigger selection register [31:0], Address offset: 0x24 */ + __IO uint32_t SWIER2; /*!< EXTI software interrupt event register [31:0], Address offset: 0x28 */ + __IO uint32_t PR2; /*!< EXTI pending register [31:0], Address offset: 0x2C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, Address offset: 0x30 - 0x3C */ + __IO uint32_t RESERVED3[8]; /*!< Reserved, Address offset: 0x40 - 0x5C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, Address offset: 0x60 - 0x7C */ + __IO uint32_t IMR1; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x80 */ + __IO uint32_t EMR1; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x84 */ + __IO uint32_t RESERVED5[2]; /*!< Reserved, Address offset: 0x88 - 0x8C */ + __IO uint32_t IMR2; /*!< EXTI wakeup with interrupt mask register for cpu1 [31:0], Address offset: 0x90 */ + __IO uint32_t EMR2; /*!< EXTI wakeup with event mask register for cpu1 [31:0], Address offset: 0x94 */ + __IO uint32_t RESERVED8[10]; /*!< Reserved, Address offset: 0x98 - 0xBC */ + __IO uint32_t C2IMR1; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xC0 */ + __IO uint32_t C2EMR1; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xC4 */ + __IO uint32_t RESERVED9[2]; /*!< Reserved, Address offset: 0xC8 - 0xCC */ + __IO uint32_t C2IMR2; /*!< EXTI wakeup with interrupt mask register for cpu2 [31:0], Address offset: 0xD0 */ + __IO uint32_t C2EMR2; /*!< EXTI wakeup with event mask register for cpu2 [31:0], Address offset: 0xD4 */ +}EXTI_TypeDef; + +/** + * @brief Public Key Accelerator (PKA) + */ +typedef struct +{ + __IO uint32_t CR; /*!< PKA control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< PKA status register, Address offset: 0x04 */ + __IO uint32_t CLRFR; /*!< PKA clear flag register, Address offset: 0x08 */ + uint32_t Reserved1[253]; /*!< Reserved Address offset: 0x000C-0x03FC*/ + __IO uint32_t RAM[894]; /*!< PKA RAM, Address offset: 0x0400-0x11F4 */ +} PKA_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ +typedef struct +{ + __IO uint32_t R[32]; /*!< HSEM 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< HSEM 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM CPU1 interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM CPU1 interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM CPU1 interrupt status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM CPU1 masked interrupt status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM CPU2 interrupt enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM CPU2 interrupt clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM CPU2 interrupt status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM CPU2 masked interrupt status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /*!< Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +/*!< Boundary memory map */ +#define FLASH_BASE (0x08000000UL)/*!< FLASH(up to 320KB) base address */ +#define SRAM_BASE (0x20000000UL)/*!< SRAM(up to 12 KB) base address */ +#define PERIPH_BASE (0x40000000UL)/*!< Peripheral base address */ + +/*!< Memory, OTP and Option bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x1FFF0000UL) /*!< System Memory : 28Kb (0x1FFF0000 � 0x1FFF6FFF) */ +#define OTP_AREA_BASE (0x1FFF7000UL) /*!< OTP area : 1kB (0x1FFF7000 � 0x1FFF73FF) */ +#define OPTION_BYTE_BASE (0x1FFF7800UL) /*!< Option Bytes : 128B (0x1FFF7800 � 0x1FFF787F) */ +#define ENGI_BYTE_BASE (0x1FFF7400UL) /*!< Engi Bytes : 3kB (0x1FFF7400 � 0x1FFF7FFF) */ + +#define SRAM1_BASE SRAM_BASE /*!< SRAM1(up to 12 KB) base address */ +#define SRAM2A_BASE (SRAM_BASE + 0x00030000UL)/*!< SRAM2A(32 KB) base address */ +#define SRAM2B_BASE (SRAM_BASE + 0x00038000UL)/*!< SRAM2B(4 KB) base address */ + +/* Memory Size */ +#define FLASH_SIZE (((uint32_t)(*((uint16_t *)FLASHSIZE_BASE)) & (0x07FFUL)) << 10U) +#define SRAM1_SIZE 0x00003000UL /*!< SRAM1 default size : 12 KB */ +#define SRAM2A_SIZE 0x00008000UL /*!< SRAM2a default size : 32 KB */ +#define SRAM2B_SIZE 0x00001000UL /*!< SRAM2b default size : 4 KB */ + +/* End addresses */ +#define SRAM1_END_ADDR (0x20002FFFUL) /*!< SRAM1 : 12KB (0x20000000 � 0x20002FFF) */ +#define SRAM2A_END_ADDR (0x20037FFFUL) /*!< SRAM2a (backup) : 32KB (0x20030000 � 0x20037FFF) */ +#define SRAM2B_END_ADDR (0x20038FFFUL) /*!< SRAM2b (backup) : 4KB (0x20038000 � 0x20038FFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x1FFF6FFFUL) /*!< System Memory : 28KB (0x1FFF0000 � 0x1FFF6FFF) */ +#define OTP_AREA_END_ADDR (0x1FFF73FFUL) /*!< OTP area : 1KB (0x1FFF7000 � 0x1FFF73FF) */ +#define OPTION_BYTE_END_ADDR (0x1FFF8FFFUL) /*!< Option Bytes : 4KB (0x1FFF8000 � 0x1FFF8FFF) */ +#define ENGI_BYTE_END_ADDR (0x1FFF7FFFUL) /*!< Engi Bytes : 3kB (0x1FFF7400 � 0x1FFF7FFF) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) +#define AHB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define APB3PERIPH_BASE (PERIPH_BASE + 0x20000000UL) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x00007C00UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x00008000UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x00009400UL) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000UL) +#define COMP1_BASE (APB2PERIPH_BASE + 0x00000200UL) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400UL) +#define ADC1_COMMON_BASE (APB2PERIPH_BASE + 0x00002700UL) + +#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000UL) +#define DMAMUX1_BASE (AHB1PERIPH_BASE + 0x00000800UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x00000100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x00000104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x00000108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x0000010CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x00000080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x00000140UL) + +/*!< AHB2 peripherals */ +#define IOPORT_BASE (AHB2PERIPH_BASE + 0x00000000UL) +#define GPIOA_BASE (IOPORT_BASE + 0x00000000UL) +#define GPIOB_BASE (IOPORT_BASE + 0x00000400UL) +#define GPIOC_BASE (IOPORT_BASE + 0x00000800UL) +#define GPIOE_BASE (IOPORT_BASE + 0x00001000UL) +#define GPIOH_BASE (IOPORT_BASE + 0x00001C00UL) + +/*!< AHB Shared peripherals */ +#define RCC_BASE (AHB4PERIPH_BASE + 0x00000000UL) +#define PWR_BASE (AHB4PERIPH_BASE + 0x00000400UL) +#define EXTI_BASE (AHB4PERIPH_BASE + 0x00000800UL) +#define IPCC_BASE (AHB4PERIPH_BASE + 0x00000C00UL) +#define RNG_BASE (AHB4PERIPH_BASE + 0x00001000UL) +#define HSEM_BASE (AHB4PERIPH_BASE + 0x00001400UL) +#define AES2_BASE (AHB4PERIPH_BASE + 0x00001800UL) +#define PKA_BASE (AHB4PERIPH_BASE + 0x00002000UL) +#define FLASH_REG_BASE (AHB4PERIPH_BASE + 0x00004000UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +/*!< AHB3 peripherals */ + +/*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x1FFF7500UL) /*!< Package data register base address */ +#define UID64_BASE ((uint32_t)0x1FFF7580UL) /*!< 64-bit Unique device Identification */ +#define UID_BASE ((uint32_t)0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE ((uint32_t)0x1FFF75E0UL) /*!< Flash size data register base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +/* Peripherals available on APB1 bus */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +/* Peripherals available on APB2 bus */ +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP1_COMMON ((COMP_Common_TypeDef *) COMP1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) + +/* Peripherals available on AHB1 bus */ +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +/* Peripherals available on AHB2 bus */ +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) + + +/* Peripherals available on AHB shared bus */ +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define IPCC ((IPCC_TypeDef *) IPCC_BASE) +#define IPCC_C1 ((IPCC_CommonTypeDef *) IPCC_BASE) +#define IPCC_C2 ((IPCC_CommonTypeDef *) (IPCC_BASE + 0x10U)) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100U)) +#define AES2 ((AES_TypeDef *) AES2_BASE) +#define PKA ((PKA_TypeDef *) PKA_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_REG_BASE) + +/* Peripherals available on AHB3 bus */ + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +#define ADC_SUPPORT_2_5_MSPS /* ADC sampling rate 2.5 Msamples/sec */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_EOCAL_Pos (11U) +#define ADC_ISR_EOCAL_Msk (0x1UL << ADC_ISR_EOCAL_Pos) /*!< 0x00000800 */ +#define ADC_ISR_EOCAL ADC_ISR_EOCAL_Msk /*!< ADC end of calibration flag */ +#define ADC_ISR_CCRDY_Pos (13U) +#define ADC_ISR_CCRDY_Msk (0x1UL << ADC_ISR_CCRDY_Pos) /*!< 0x00002000 */ +#define ADC_ISR_CCRDY ADC_ISR_CCRDY_Msk /*!< ADC channel configuration ready flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_EOCALIE_Pos (11U) +#define ADC_IER_EOCALIE_Msk (0x1UL << ADC_IER_EOCALIE_Pos) /*!< 0x00000800 */ +#define ADC_IER_EOCALIE ADC_IER_EOCALIE_Msk /*!< ADC end of calibration interrupt */ +#define ADC_IER_CCRDYIE_Pos (13U) +#define ADC_IER_CCRDYIE_Msk (0x1UL << ADC_IER_CCRDYIE_Pos) /*!< 0x00002000 */ +#define ADC_IER_CCRDYIE ADC_IER_CCRDYIE_Msk /*!< ADC channel configuration ready interrupt */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR1 register *****************/ +#define ADC_CFGR1_DMAEN_Pos (0U) +#define ADC_CFGR1_DMAEN_Msk (0x1UL << ADC_CFGR1_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR1_DMAEN ADC_CFGR1_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR1_DMACFG_Pos (1U) +#define ADC_CFGR1_DMACFG_Msk (0x1UL << ADC_CFGR1_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR1_DMACFG ADC_CFGR1_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR1_SCANDIR_Pos (2U) +#define ADC_CFGR1_SCANDIR_Msk (0x1UL << ADC_CFGR1_SCANDIR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR_Msk /*!< ADC group regular sequencer scan direction */ + +#define ADC_CFGR1_RES_Pos (3U) +#define ADC_CFGR1_RES_Msk (0x3UL << ADC_CFGR1_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR1_RES ADC_CFGR1_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR1_RES_0 (0x1UL << ADC_CFGR1_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR1_RES_1 (0x2UL << ADC_CFGR1_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR1_ALIGN_Pos (5U) +#define ADC_CFGR1_ALIGN_Msk (0x1UL << ADC_CFGR1_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR1_ALIGN ADC_CFGR1_ALIGN_Msk /*!< ADC data alignement */ + +#define ADC_CFGR1_EXTSEL_Pos (6U) +#define ADC_CFGR1_EXTSEL_Msk (0x7UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x000001C0 */ +#define ADC_CFGR1_EXTSEL ADC_CFGR1_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR1_EXTSEL_0 (0x1UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR1_EXTSEL_1 (0x2UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR1_EXTSEL_2 (0x4UL << ADC_CFGR1_EXTSEL_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR1_EXTEN_Pos (10U) +#define ADC_CFGR1_EXTEN_Msk (0x3UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR1_EXTEN ADC_CFGR1_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR1_EXTEN_0 (0x1UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR1_EXTEN_1 (0x2UL << ADC_CFGR1_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR1_OVRMOD_Pos (12U) +#define ADC_CFGR1_OVRMOD_Msk (0x1UL << ADC_CFGR1_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR1_OVRMOD ADC_CFGR1_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR1_CONT_Pos (13U) +#define ADC_CFGR1_CONT_Msk (0x1UL << ADC_CFGR1_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR1_CONT ADC_CFGR1_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR1_WAIT_Pos (14U) +#define ADC_CFGR1_WAIT_Msk (0x1UL << ADC_CFGR1_WAIT_Pos) /*!< 0x00004000 */ +#define ADC_CFGR1_WAIT ADC_CFGR1_WAIT_Msk /*!< ADC low power auto wait */ +#define ADC_CFGR1_AUTOFF_Pos (15U) +#define ADC_CFGR1_AUTOFF_Msk (0x1UL << ADC_CFGR1_AUTOFF_Pos) /*!< 0x00008000 */ +#define ADC_CFGR1_AUTOFF ADC_CFGR1_AUTOFF_Msk /*!< ADC low power auto power off */ +#define ADC_CFGR1_DISCEN_Pos (16U) +#define ADC_CFGR1_DISCEN_Msk (0x1UL << ADC_CFGR1_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR1_DISCEN ADC_CFGR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ +#define ADC_CFGR1_CHSELRMOD_Pos (21U) +#define ADC_CFGR1_CHSELRMOD_Msk (0x1UL << ADC_CFGR1_CHSELRMOD_Pos) /*!< 0x00200000 */ +#define ADC_CFGR1_CHSELRMOD ADC_CFGR1_CHSELRMOD_Msk /*!< ADC group regular sequencer mode */ + +#define ADC_CFGR1_AWD1SGL_Pos (22U) +#define ADC_CFGR1_AWD1SGL_Msk (0x1UL << ADC_CFGR1_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR1_AWD1SGL ADC_CFGR1_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR1_AWD1EN_Pos (23U) +#define ADC_CFGR1_AWD1EN_Msk (0x1UL << ADC_CFGR1_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR1_AWD1EN ADC_CFGR1_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ + +#define ADC_CFGR1_AWD1CH_Pos (26U) +#define ADC_CFGR1_AWD1CH_Msk (0x1FUL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR1_AWD1CH ADC_CFGR1_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR1_AWD1CH_0 (0x01UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR1_AWD1CH_1 (0x02UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR1_AWD1CH_2 (0x04UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR1_AWD1CH_3 (0x08UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR1_AWD1CH_4 (0x10UL << ADC_CFGR1_AWD1CH_Pos) /*!< 0x40000000 */ + +/* Definitions for cohabitation of ADC peripherals 2.5Ms/sec and 5Ms/sec accross STM32WB serie */ +#define ADC_CFGR_DMAEN_Pos ADC_CFGR1_DMAEN_Pos +#define ADC_CFGR_DMAEN_Msk ADC_CFGR1_DMAEN_Msk +#define ADC_CFGR_DMAEN ADC_CFGR1_DMAEN +#define ADC_CFGR_DMACFG_Pos ADC_CFGR1_DMACFG_Pos +#define ADC_CFGR_DMACFG_Msk ADC_CFGR1_DMACFG_Msk +#define ADC_CFGR_DMACFG ADC_CFGR1_DMACFG + +#define ADC_CFGR_SCANDIR_Pos ADC_CFGR1_SCANDIR_Pos +#define ADC_CFGR_SCANDIR_Msk ADC_CFGR1_SCANDIR_Msk +#define ADC_CFGR_SCANDIR ADC_CFGR1_SCANDIR + +#define ADC_CFGR_RES_Pos ADC_CFGR1_RES_Pos +#define ADC_CFGR_RES_Msk ADC_CFGR1_RES_Msk +#define ADC_CFGR_RES ADC_CFGR1_RES +#define ADC_CFGR_RES_0 ADC_CFGR1_RES_0 +#define ADC_CFGR_RES_1 ADC_CFGR1_RES_1 + +#define ADC_CFGR_ALIGN_Pos ADC_CFGR1_ALIGN_Pos +#define ADC_CFGR_ALIGN_Msk ADC_CFGR1_ALIGN_Msk +#define ADC_CFGR_ALIGN ADC_CFGR1_ALIGN + +#define ADC_CFGR_EXTSEL_Pos ADC_CFGR1_EXTSEL_Pos +#define ADC_CFGR_EXTSEL_Msk ADC_CFGR1_EXTSEL_Msk +#define ADC_CFGR_EXTSEL ADC_CFGR1_EXTSEL +#define ADC_CFGR_EXTSEL_0 ADC_CFGR1_EXTSEL_0 +#define ADC_CFGR_EXTSEL_1 ADC_CFGR1_EXTSEL_1 +#define ADC_CFGR_EXTSEL_2 ADC_CFGR1_EXTSEL_2 + +#define ADC_CFGR_EXTEN_Pos ADC_CFGR1_EXTEN_Pos +#define ADC_CFGR_EXTEN_Msk ADC_CFGR1_EXTEN_Msk +#define ADC_CFGR_EXTEN ADC_CFGR1_EXTEN +#define ADC_CFGR_EXTEN_0 ADC_CFGR1_EXTEN_0 +#define ADC_CFGR_EXTEN_1 ADC_CFGR1_EXTEN_1 + +#define ADC_CFGR_OVRMOD_Pos ADC_CFGR1_OVRMOD_Pos +#define ADC_CFGR_OVRMOD_Msk ADC_CFGR1_OVRMOD_Msk +#define ADC_CFGR_OVRMOD ADC_CFGR1_OVRMOD +#define ADC_CFGR_CONT_Pos ADC_CFGR1_CONT_Pos +#define ADC_CFGR_CONT_Msk ADC_CFGR1_CONT_Msk +#define ADC_CFGR_CONT ADC_CFGR1_CONT +#define ADC_CFGR_AUTDLY_Pos ADC_CFGR1_WAIT_Pos +#define ADC_CFGR_AUTDLY_Msk ADC_CFGR1_WAIT_Msk +#define ADC_CFGR_AUTDLY ADC_CFGR1_WAIT +#define ADC_CFGR_AUTOFF_Pos ADC_CFGR1_AUTOFF_Pos +#define ADC_CFGR_AUTOFF_Msk ADC_CFGR1_AUTOFF_Msk +#define ADC_CFGR_AUTOFF ADC_CFGR1_AUTOFF +#define ADC_CFGR_DISCEN_Pos ADC_CFGR1_DISCEN_Pos +#define ADC_CFGR_DISCEN_Msk ADC_CFGR1_DISCEN_Msk +#define ADC_CFGR_DISCEN ADC_CFGR1_DISCEN +#define ADC_CFGR_CHSELRMOD_Pos ADC_CFGR1_CHSELRMOD_Pos +#define ADC_CFGR_CHSELRMOD_Msk ADC_CFGR1_CHSELRMOD_Msk +#define ADC_CFGR_CHSELRMOD ADC_CFGR1_CHSELRMOD + +#define ADC_CFGR_AWD1SGL_Pos ADC_CFGR1_AWD1SGL_Pos +#define ADC_CFGR_AWD1SGL_Msk ADC_CFGR1_AWD1SGL_Msk +#define ADC_CFGR_AWD1SGL ADC_CFGR1_AWD1SGL +#define ADC_CFGR_AWD1EN_Pos ADC_CFGR1_AWD1EN_Pos +#define ADC_CFGR_AWD1EN_Msk ADC_CFGR1_AWD1EN_Msk +#define ADC_CFGR_AWD1EN ADC_CFGR1_AWD1EN + +#define ADC_CFGR_AWD1CH_Pos ADC_CFGR1_AWD1CH_Pos +#define ADC_CFGR_AWD1CH_Msk ADC_CFGR1_AWD1CH_Msk +#define ADC_CFGR_AWD1CH ADC_CFGR1_AWD1CH +#define ADC_CFGR_AWD1CH_0 ADC_CFGR1_AWD1CH_0 +#define ADC_CFGR_AWD1CH_1 ADC_CFGR1_AWD1CH_1 +#define ADC_CFGR_AWD1CH_2 ADC_CFGR1_AWD1CH_2 +#define ADC_CFGR_AWD1CH_3 ADC_CFGR1_AWD1CH_3 +#define ADC_CFGR_AWD1CH_4 ADC_CFGR1_AWD1CH_4 + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_LFTRIG_Pos (29U) +#define ADC_CFGR2_LFTRIG_Msk (0x1UL << ADC_CFGR2_LFTRIG_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LFTRIG ADC_CFGR2_LFTRIG_Msk /*!< ADC low frequency trigger mode */ + +#define ADC_CFGR2_CKMODE_Pos (30U) +#define ADC_CFGR2_CKMODE_Msk (0x3UL << ADC_CFGR2_CKMODE_Pos) /*!< 0xC0000000 */ +#define ADC_CFGR2_CKMODE ADC_CFGR2_CKMODE_Msk /*!< ADC clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CFGR2_CKMODE_1 (0x2UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x80000000 */ +#define ADC_CFGR2_CKMODE_0 (0x1UL << ADC_CFGR2_CKMODE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_SMPR register ******************/ +#define ADC_SMPR_SMP1_Pos (0U) +#define ADC_SMPR_SMP1_Msk (0x7UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000007 */ +#define ADC_SMPR_SMP1 ADC_SMPR_SMP1_Msk /*!< ADC group of channels sampling time 1 */ +#define ADC_SMPR_SMP1_0 (0x1UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000001 */ +#define ADC_SMPR_SMP1_1 (0x2UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000002 */ +#define ADC_SMPR_SMP1_2 (0x4UL << ADC_SMPR_SMP1_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR_SMP2_Pos (4U) +#define ADC_SMPR_SMP2_Msk (0x7UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000070 */ +#define ADC_SMPR_SMP2 ADC_SMPR_SMP2_Msk /*!< ADC group of channels sampling time 2 */ +#define ADC_SMPR_SMP2_0 (0x1UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000010 */ +#define ADC_SMPR_SMP2_1 (0x2UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000020 */ +#define ADC_SMPR_SMP2_2 (0x4UL << ADC_SMPR_SMP2_Pos) /*!< 0x00000040 */ + +#define ADC_SMPR_SMPSEL_Pos (8U) +#define ADC_SMPR_SMPSEL_Msk (0x7FFFFUL << ADC_SMPR_SMPSEL_Pos) /*!< 0x07FFFF00 */ +#define ADC_SMPR_SMPSEL ADC_SMPR_SMPSEL_Msk /*!< ADC all channels sampling time selection */ +#define ADC_SMPR_SMPSEL0_Pos (8U) +#define ADC_SMPR_SMPSEL0_Msk (0x1UL << ADC_SMPR_SMPSEL0_Pos) /*!< 0x00000100 */ +#define ADC_SMPR_SMPSEL0 ADC_SMPR_SMPSEL0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR_SMPSEL1_Pos (9U) +#define ADC_SMPR_SMPSEL1_Msk (0x1UL << ADC_SMPR_SMPSEL1_Pos) /*!< 0x00000200 */ +#define ADC_SMPR_SMPSEL1 ADC_SMPR_SMPSEL1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR_SMPSEL2_Pos (10U) +#define ADC_SMPR_SMPSEL2_Msk (0x1UL << ADC_SMPR_SMPSEL2_Pos) /*!< 0x00000400 */ +#define ADC_SMPR_SMPSEL2 ADC_SMPR_SMPSEL2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR_SMPSEL3_Pos (11U) +#define ADC_SMPR_SMPSEL3_Msk (0x1UL << ADC_SMPR_SMPSEL3_Pos) /*!< 0x00000800 */ +#define ADC_SMPR_SMPSEL3 ADC_SMPR_SMPSEL3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR_SMPSEL4_Pos (12U) +#define ADC_SMPR_SMPSEL4_Msk (0x1UL << ADC_SMPR_SMPSEL4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR_SMPSEL4 ADC_SMPR_SMPSEL4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR_SMPSEL5_Pos (13U) +#define ADC_SMPR_SMPSEL5_Msk (0x1UL << ADC_SMPR_SMPSEL5_Pos) /*!< 0x00002000 */ +#define ADC_SMPR_SMPSEL5 ADC_SMPR_SMPSEL5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR_SMPSEL6_Pos (14U) +#define ADC_SMPR_SMPSEL6_Msk (0x1UL << ADC_SMPR_SMPSEL6_Pos) /*!< 0x00004000 */ +#define ADC_SMPR_SMPSEL6 ADC_SMPR_SMPSEL6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR_SMPSEL7_Pos (15U) +#define ADC_SMPR_SMPSEL7_Msk (0x1UL << ADC_SMPR_SMPSEL7_Pos) /*!< 0x00008000 */ +#define ADC_SMPR_SMPSEL7 ADC_SMPR_SMPSEL7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR_SMPSEL8_Pos (16U) +#define ADC_SMPR_SMPSEL8_Msk (0x1UL << ADC_SMPR_SMPSEL8_Pos) /*!< 0x00010000 */ +#define ADC_SMPR_SMPSEL8 ADC_SMPR_SMPSEL8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR_SMPSEL9_Pos (17U) +#define ADC_SMPR_SMPSEL9_Msk (0x1UL << ADC_SMPR_SMPSEL9_Pos) /*!< 0x00020000 */ +#define ADC_SMPR_SMPSEL9 ADC_SMPR_SMPSEL9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR_SMPSEL10_Pos (18U) +#define ADC_SMPR_SMPSEL10_Msk (0x1UL << ADC_SMPR_SMPSEL10_Pos) /*!< 0x00040000 */ +#define ADC_SMPR_SMPSEL10 ADC_SMPR_SMPSEL10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR_SMPSEL11_Pos (19U) +#define ADC_SMPR_SMPSEL11_Msk (0x1UL << ADC_SMPR_SMPSEL11_Pos) /*!< 0x00080000 */ +#define ADC_SMPR_SMPSEL11 ADC_SMPR_SMPSEL11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR_SMPSEL12_Pos (20U) +#define ADC_SMPR_SMPSEL12_Msk (0x1UL << ADC_SMPR_SMPSEL12_Pos) /*!< 0x00100000 */ +#define ADC_SMPR_SMPSEL12 ADC_SMPR_SMPSEL12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR_SMPSEL13_Pos (21U) +#define ADC_SMPR_SMPSEL13_Msk (0x1UL << ADC_SMPR_SMPSEL13_Pos) /*!< 0x00200000 */ +#define ADC_SMPR_SMPSEL13 ADC_SMPR_SMPSEL13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR_SMPSEL14_Pos (22U) +#define ADC_SMPR_SMPSEL14_Msk (0x1UL << ADC_SMPR_SMPSEL14_Pos) /*!< 0x00400000 */ +#define ADC_SMPR_SMPSEL14 ADC_SMPR_SMPSEL14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR_SMPSEL15_Pos (23U) +#define ADC_SMPR_SMPSEL15_Msk (0x1UL << ADC_SMPR_SMPSEL15_Pos) /*!< 0x00800000 */ +#define ADC_SMPR_SMPSEL15 ADC_SMPR_SMPSEL15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR_SMPSEL16_Pos (24U) +#define ADC_SMPR_SMPSEL16_Msk (0x1UL << ADC_SMPR_SMPSEL16_Pos) /*!< 0x01000000 */ +#define ADC_SMPR_SMPSEL16 ADC_SMPR_SMPSEL16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR_SMPSEL17_Pos (25U) +#define ADC_SMPR_SMPSEL17_Msk (0x1UL << ADC_SMPR_SMPSEL17_Pos) /*!< 0x02000000 */ +#define ADC_SMPR_SMPSEL17 ADC_SMPR_SMPSEL17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR_SMPSEL18_Pos (25U) +#define ADC_SMPR_SMPSEL18_Msk (0x1UL << ADC_SMPR_SMPSEL18_Pos) /*!< 0x04000000 */ +#define ADC_SMPR_SMPSEL18 ADC_SMPR_SMPSEL18_Msk /*!< ADC channel 18 sampling time selection */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_CHSELR register ****************/ +#define ADC_CHSELR_CHSEL_Pos (0U) +#define ADC_CHSELR_CHSEL_Msk (0x7FFFFUL << ADC_CHSELR_CHSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_CHSELR_CHSEL ADC_CHSELR_CHSEL_Msk /*!< ADC group regular sequencer channels, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL18_Pos (18U) +#define ADC_CHSELR_CHSEL18_Msk (0x1UL << ADC_CHSELR_CHSEL18_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_CHSEL18 ADC_CHSELR_CHSEL18_Msk /*!< ADC group regular sequencer channel 18, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL17_Pos (17U) +#define ADC_CHSELR_CHSEL17_Msk (0x1UL << ADC_CHSELR_CHSEL17_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_CHSEL17 ADC_CHSELR_CHSEL17_Msk /*!< ADC group regular sequencer channel 17, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL16_Pos (16U) +#define ADC_CHSELR_CHSEL16_Msk (0x1UL << ADC_CHSELR_CHSEL16_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_CHSEL16 ADC_CHSELR_CHSEL16_Msk /*!< ADC group regular sequencer channel 16, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL15_Pos (15U) +#define ADC_CHSELR_CHSEL15_Msk (0x1UL << ADC_CHSELR_CHSEL15_Pos) /*!< 0x00008000 */ +#define ADC_CHSELR_CHSEL15 ADC_CHSELR_CHSEL15_Msk /*!< ADC group regular sequencer channel 15, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL14_Pos (14U) +#define ADC_CHSELR_CHSEL14_Msk (0x1UL << ADC_CHSELR_CHSEL14_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_CHSEL14 ADC_CHSELR_CHSEL14_Msk /*!< ADC group regular sequencer channel 14, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL13_Pos (13U) +#define ADC_CHSELR_CHSEL13_Msk (0x1UL << ADC_CHSELR_CHSEL13_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_CHSEL13 ADC_CHSELR_CHSEL13_Msk /*!< ADC group regular sequencer channel 13, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL12_Pos (12U) +#define ADC_CHSELR_CHSEL12_Msk (0x1UL << ADC_CHSELR_CHSEL12_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_CHSEL12 ADC_CHSELR_CHSEL12_Msk /*!< ADC group regular sequencer channel 12, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL11_Pos (11U) +#define ADC_CHSELR_CHSEL11_Msk (0x1UL << ADC_CHSELR_CHSEL11_Pos) /*!< 0x00000800 */ +#define ADC_CHSELR_CHSEL11 ADC_CHSELR_CHSEL11_Msk /*!< ADC group regular sequencer channel 11, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL10_Pos (10U) +#define ADC_CHSELR_CHSEL10_Msk (0x1UL << ADC_CHSELR_CHSEL10_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_CHSEL10 ADC_CHSELR_CHSEL10_Msk /*!< ADC group regular sequencer channel 10, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL9_Pos (9U) +#define ADC_CHSELR_CHSEL9_Msk (0x1UL << ADC_CHSELR_CHSEL9_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_CHSEL9 ADC_CHSELR_CHSEL9_Msk /*!< ADC group regular sequencer channel 9, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL8_Pos (8U) +#define ADC_CHSELR_CHSEL8_Msk (0x1UL << ADC_CHSELR_CHSEL8_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_CHSEL8 ADC_CHSELR_CHSEL8_Msk /*!< ADC group regular sequencer channel 8, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL7_Pos (7U) +#define ADC_CHSELR_CHSEL7_Msk (0x1UL << ADC_CHSELR_CHSEL7_Pos) /*!< 0x00000080 */ +#define ADC_CHSELR_CHSEL7 ADC_CHSELR_CHSEL7_Msk /*!< ADC group regular sequencer channel 7, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL6_Pos (6U) +#define ADC_CHSELR_CHSEL6_Msk (0x1UL << ADC_CHSELR_CHSEL6_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_CHSEL6 ADC_CHSELR_CHSEL6_Msk /*!< ADC group regular sequencer channel 6, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL5_Pos (5U) +#define ADC_CHSELR_CHSEL5_Msk (0x1UL << ADC_CHSELR_CHSEL5_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_CHSEL5 ADC_CHSELR_CHSEL5_Msk /*!< ADC group regular sequencer channel 5, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL4_Pos (4U) +#define ADC_CHSELR_CHSEL4_Msk (0x1UL << ADC_CHSELR_CHSEL4_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_CHSEL4 ADC_CHSELR_CHSEL4_Msk /*!< ADC group regular sequencer channel 4, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL3_Pos (3U) +#define ADC_CHSELR_CHSEL3_Msk (0x1UL << ADC_CHSELR_CHSEL3_Pos) /*!< 0x00000008 */ +#define ADC_CHSELR_CHSEL3 ADC_CHSELR_CHSEL3_Msk /*!< ADC group regular sequencer channel 3, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL2_Pos (2U) +#define ADC_CHSELR_CHSEL2_Msk (0x1UL << ADC_CHSELR_CHSEL2_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_CHSEL2 ADC_CHSELR_CHSEL2_Msk /*!< ADC group regular sequencer channel 2, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL1_Pos (1U) +#define ADC_CHSELR_CHSEL1_Msk (0x1UL << ADC_CHSELR_CHSEL1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_CHSEL1 ADC_CHSELR_CHSEL1_Msk /*!< ADC group regular sequencer channel 1, available when ADC_CFGR1_CHSELRMOD is reset */ +#define ADC_CHSELR_CHSEL0_Pos (0U) +#define ADC_CHSELR_CHSEL0_Msk (0x1UL << ADC_CHSELR_CHSEL0_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_CHSEL0 ADC_CHSELR_CHSEL0_Msk /*!< ADC group regular sequencer channel 0, available when ADC_CFGR1_CHSELRMOD is reset */ + +#define ADC_CHSELR_SQ_ALL_Pos (0U) +#define ADC_CHSELR_SQ_ALL_Msk (0xFFFFFFFFUL << ADC_CHSELR_SQ_ALL_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CHSELR_SQ_ALL ADC_CHSELR_SQ_ALL_Msk /*!< ADC group regular sequencer all ranks, available when ADC_CFGR1_CHSELRMOD is set */ + +#define ADC_CHSELR_SQ8_Pos (28U) +#define ADC_CHSELR_SQ8_Msk (0xFUL << ADC_CHSELR_SQ8_Pos) /*!< 0xF0000000 */ +#define ADC_CHSELR_SQ8 ADC_CHSELR_SQ8_Msk /*!< ADC group regular sequencer rank 8, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ8_0 (0x1UL << ADC_CHSELR_SQ8_Pos) /*!< 0x10000000 */ +#define ADC_CHSELR_SQ8_1 (0x2UL << ADC_CHSELR_SQ8_Pos) /*!< 0x20000000 */ +#define ADC_CHSELR_SQ8_2 (0x4UL << ADC_CHSELR_SQ8_Pos) /*!< 0x40000000 */ +#define ADC_CHSELR_SQ8_3 (0x8UL << ADC_CHSELR_SQ8_Pos) /*!< 0x80000000 */ + +#define ADC_CHSELR_SQ7_Pos (24U) +#define ADC_CHSELR_SQ7_Msk (0xFUL << ADC_CHSELR_SQ7_Pos) /*!< 0x0F000000 */ +#define ADC_CHSELR_SQ7 ADC_CHSELR_SQ7_Msk /*!< ADC group regular sequencer rank 7, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ7_0 (0x1UL << ADC_CHSELR_SQ7_Pos) /*!< 0x01000000 */ +#define ADC_CHSELR_SQ7_1 (0x2UL << ADC_CHSELR_SQ7_Pos) /*!< 0x02000000 */ +#define ADC_CHSELR_SQ7_2 (0x4UL << ADC_CHSELR_SQ7_Pos) /*!< 0x04000000 */ +#define ADC_CHSELR_SQ7_3 (0x8UL << ADC_CHSELR_SQ7_Pos) /*!< 0x08000000 */ + +#define ADC_CHSELR_SQ6_Pos (20U) +#define ADC_CHSELR_SQ6_Msk (0xFUL << ADC_CHSELR_SQ6_Pos) /*!< 0x00F00000 */ +#define ADC_CHSELR_SQ6 ADC_CHSELR_SQ6_Msk /*!< ADC group regular sequencer rank 6, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ6_0 (0x1UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00100000 */ +#define ADC_CHSELR_SQ6_1 (0x2UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00200000 */ +#define ADC_CHSELR_SQ6_2 (0x4UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00400000 */ +#define ADC_CHSELR_SQ6_3 (0x8UL << ADC_CHSELR_SQ6_Pos) /*!< 0x00800000 */ + +#define ADC_CHSELR_SQ5_Pos (16U) +#define ADC_CHSELR_SQ5_Msk (0xFUL << ADC_CHSELR_SQ5_Pos) /*!< 0x000F0000 */ +#define ADC_CHSELR_SQ5 ADC_CHSELR_SQ5_Msk /*!< ADC group regular sequencer rank 5, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ5_0 (0x1UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00010000 */ +#define ADC_CHSELR_SQ5_1 (0x2UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00020000 */ +#define ADC_CHSELR_SQ5_2 (0x4UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00040000 */ +#define ADC_CHSELR_SQ5_3 (0x8UL << ADC_CHSELR_SQ5_Pos) /*!< 0x00080000 */ + +#define ADC_CHSELR_SQ4_Pos (12U) +#define ADC_CHSELR_SQ4_Msk (0xFUL << ADC_CHSELR_SQ4_Pos) /*!< 0x0000F000 */ +#define ADC_CHSELR_SQ4 ADC_CHSELR_SQ4_Msk /*!< ADC group regular sequencer rank 4, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ4_0 (0x1UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00001000 */ +#define ADC_CHSELR_SQ4_1 (0x2UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00002000 */ +#define ADC_CHSELR_SQ4_2 (0x4UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00004000 */ +#define ADC_CHSELR_SQ4_3 (0x8UL << ADC_CHSELR_SQ4_Pos) /*!< 0x00008000 */ + +#define ADC_CHSELR_SQ3_Pos (8U) +#define ADC_CHSELR_SQ3_Msk (0xFUL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000F00 */ +#define ADC_CHSELR_SQ3 ADC_CHSELR_SQ3_Msk /*!< ADC group regular sequencer rank 3, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ3_0 (0x1UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000100 */ +#define ADC_CHSELR_SQ3_1 (0x2UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000200 */ +#define ADC_CHSELR_SQ3_2 (0x4UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000400 */ +#define ADC_CHSELR_SQ3_3 (0x8UL << ADC_CHSELR_SQ3_Pos) /*!< 0x00000800 */ + +#define ADC_CHSELR_SQ2_Pos (4U) +#define ADC_CHSELR_SQ2_Msk (0xFUL << ADC_CHSELR_SQ2_Pos) /*!< 0x000000F0 */ +#define ADC_CHSELR_SQ2 ADC_CHSELR_SQ2_Msk /*!< ADC group regular sequencer rank 2, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ2_0 (0x1UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000010 */ +#define ADC_CHSELR_SQ2_1 (0x2UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000020 */ +#define ADC_CHSELR_SQ2_2 (0x4UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000040 */ +#define ADC_CHSELR_SQ2_3 (0x8UL << ADC_CHSELR_SQ2_Pos) /*!< 0x00000080 */ + +#define ADC_CHSELR_SQ1_Pos (0U) +#define ADC_CHSELR_SQ1_Msk (0xFUL << ADC_CHSELR_SQ1_Pos) /*!< 0x0000000F */ +#define ADC_CHSELR_SQ1 ADC_CHSELR_SQ1_Msk /*!< ADC group regular sequencer rank 1, available when ADC_CFGR1_CHSELRMOD is set */ +#define ADC_CHSELR_SQ1_0 (0x1UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000001 */ +#define ADC_CHSELR_SQ1_1 (0x2UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000002 */ +#define ADC_CHSELR_SQ1_2 (0x4UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000004 */ +#define ADC_CHSELR_SQ1_3 (0x8UL << ADC_CHSELR_SQ1_Pos) /*!< 0x00000008 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA_Pos (0U) +#define ADC_DR_DATA_Msk (0xFFFFUL << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_DATA_0 (0x0001UL << ADC_DR_DATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_DATA_1 (0x0002UL << ADC_DR_DATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_DATA_2 (0x0004UL << ADC_DR_DATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_DATA_3 (0x0008UL << ADC_DR_DATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_DATA_4 (0x0010UL << ADC_DR_DATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_DATA_5 (0x0020UL << ADC_DR_DATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_DATA_6 (0x0040UL << ADC_DR_DATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_DATA_7 (0x0080UL << ADC_DR_DATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_DATA_8 (0x0100UL << ADC_DR_DATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_DATA_9 (0x0200UL << ADC_DR_DATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_DATA_10 (0x0400UL << ADC_DR_DATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_DATA_11 (0x0800UL << ADC_DR_DATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_DATA_12 (0x1000UL << ADC_DR_DATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_DATA_13 (0x2000UL << ADC_DR_DATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_DATA_14 (0x4000UL << ADC_DR_DATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_DATA_15 (0x8000UL << ADC_DR_DATA_Pos) /*!< 0x00008000 */ + +/* Definitions for cohabitation of ADC peripherals 2.5Ms/sec and 5Ms/sec accross STM32WB serie */ +#define ADC_DR_RDATA_Pos ADC_DR_DATA_Pos +#define ADC_DR_RDATA_Msk ADC_DR_DATA_Msk +#define ADC_DR_RDATA ADC_DR_DATA + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_Pos (0U) +#define ADC_CALFACT_CALFACT_Msk (0x7FUL << ADC_CALFACT_CALFACT_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT ADC_CALFACT_CALFACT_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_0 (0x01UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_1 (0x02UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_2 (0x04UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_3 (0x08UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_4 (0x10UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_5 (0x20UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_6 (0x40UL << ADC_CALFACT_CALFACT_Pos) /*!< 0x00000040 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************************************************************************/ +/* */ +/* Analog Comparators (COMP) */ +/* */ +/******************************************************************************/ +/********************** Bit definition for COMP_CSR register ***************/ +#define COMP_CSR_EN_Pos (0U) +#define COMP_CSR_EN_Msk (0x1UL << COMP_CSR_EN_Pos) /*!< 0x00000001 */ +#define COMP_CSR_EN COMP_CSR_EN_Msk /*!< Comparator enable */ +#define COMP_CSR_PWRMODE_Pos (2U) +#define COMP_CSR_PWRMODE_Msk (0x3UL << COMP_CSR_PWRMODE_Pos) /*!< 0x0000000C */ +#define COMP_CSR_PWRMODE COMP_CSR_PWRMODE_Msk /*!< Comparator power mode */ +#define COMP_CSR_PWRMODE_0 (0x1UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000004 */ +#define COMP_CSR_PWRMODE_1 (0x2UL << COMP_CSR_PWRMODE_Pos) /*!< 0x00000008 */ +#define COMP_CSR_INMSEL_Pos (4U) +#define COMP_CSR_INMSEL_Msk (0x7UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000070 */ +#define COMP_CSR_INMSEL COMP_CSR_INMSEL_Msk /*!< Comparator input minus selection */ +#define COMP_CSR_INMSEL_0 (0x1UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000010 */ +#define COMP_CSR_INMSEL_1 (0x2UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000020 */ +#define COMP_CSR_INMSEL_2 (0x4UL << COMP_CSR_INMSEL_Pos) /*!< 0x00000040 */ +#define COMP_CSR_INPSEL_Pos (7U) +#define COMP_CSR_INPSEL_Msk (0x3UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000180 */ +#define COMP_CSR_INPSEL COMP_CSR_INPSEL_Msk /*!< Comparator input plus selection */ +#define COMP_CSR_INPSEL_0 (0x1UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000080 */ +#define COMP_CSR_INPSEL_1 (0x2UL << COMP_CSR_INPSEL_Pos) /*!< 0x00000100 */ +#define COMP_CSR_POLARITY_Pos (15U) +#define COMP_CSR_POLARITY_Msk (0x1UL << COMP_CSR_POLARITY_Pos) /*!< 0x00008000 */ +#define COMP_CSR_POLARITY COMP_CSR_POLARITY_Msk /*!< Comparator output polarity */ +#define COMP_CSR_HYST_Pos (16U) +#define COMP_CSR_HYST_Msk (0x3UL << COMP_CSR_HYST_Pos) /*!< 0x00030000 */ +#define COMP_CSR_HYST COMP_CSR_HYST_Msk /*!< Comparator hysteresis */ +#define COMP_CSR_HYST_0 (0x1UL << COMP_CSR_HYST_Pos) /*!< 0x00010000 */ +#define COMP_CSR_HYST_1 (0x2UL << COMP_CSR_HYST_Pos) /*!< 0x00020000 */ +#define COMP_CSR_BLANKING_Pos (18U) +#define COMP_CSR_BLANKING_Msk (0x7UL << COMP_CSR_BLANKING_Pos) /*!< 0x001C0000 */ +#define COMP_CSR_BLANKING COMP_CSR_BLANKING_Msk /*!< Comparator blanking source */ +#define COMP_CSR_BLANKING_0 (0x1UL << COMP_CSR_BLANKING_Pos) /*!< 0x00040000 */ +#define COMP_CSR_BLANKING_1 (0x2UL << COMP_CSR_BLANKING_Pos) /*!< 0x00080000 */ +#define COMP_CSR_BLANKING_2 (0x4UL << COMP_CSR_BLANKING_Pos) /*!< 0x00100000 */ +#define COMP_CSR_BRGEN_Pos (22U) +#define COMP_CSR_BRGEN_Msk (0x1UL << COMP_CSR_BRGEN_Pos) /*!< 0x00400000 */ +#define COMP_CSR_BRGEN COMP_CSR_BRGEN_Msk /*!< Comparator voltage scaler enable */ +#define COMP_CSR_SCALEN_Pos (23U) +#define COMP_CSR_SCALEN_Msk (0x1UL << COMP_CSR_SCALEN_Pos) /*!< 0x00800000 */ +#define COMP_CSR_SCALEN COMP_CSR_SCALEN_Msk /*!< Comparator scaler bridge enable */ +#define COMP_CSR_INMESEL_Pos (25U) +#define COMP_CSR_INMESEL_Msk (0x3UL << COMP_CSR_INMESEL_Pos) /*!< 0x06000000 */ +#define COMP_CSR_INMESEL COMP_CSR_INMESEL_Msk /*!< Comparator input minus extended selection */ +#define COMP_CSR_INMESEL_0 (0x1UL << COMP_CSR_INMESEL_Pos) /*!< 0x02000000 */ +#define COMP_CSR_INMESEL_1 (0x2UL << COMP_CSR_INMESEL_Pos) /*!< 0x04000000 */ +#define COMP_CSR_VALUE_Pos (30U) +#define COMP_CSR_VALUE_Msk (0x1UL << COMP_CSR_VALUE_Pos) /*!< 0x40000000 */ +#define COMP_CSR_VALUE COMP_CSR_VALUE_Msk /*!< Comparator output level */ +#define COMP_CSR_LOCK_Pos (31U) +#define COMP_CSR_LOCK_Msk (0x1UL << COMP_CSR_LOCK_Pos) /*!< 0x80000000 */ +#define COMP_CSR_LOCK COMP_CSR_LOCK_Msk /*!< Comparator lock */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR_Pos (0U) +#define CRC_DR_DR_Msk (0xFFFFFFFFUL << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ +#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR_Pos (0U) +#define CRC_IDR_IDR_Msk (0xFFFFFFFFUL << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ +#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bits data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET_Pos (0U) +#define CRC_CR_RESET_Msk (0x1UL << CRC_CR_RESET_Pos) /*!< 0x00000001 */ +#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET the CRC computation unit bit */ +#define CRC_CR_POLYSIZE_Pos (3U) +#define CRC_CR_POLYSIZE_Msk (0x3UL << CRC_CR_POLYSIZE_Pos) /*!< 0x00000018 */ +#define CRC_CR_POLYSIZE CRC_CR_POLYSIZE_Msk /*!< Polynomial size bits */ +#define CRC_CR_POLYSIZE_0 (0x1U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000008 */ +#define CRC_CR_POLYSIZE_1 (0x2U << CRC_CR_POLYSIZE_Pos) /*!< 0x00000010 */ +#define CRC_CR_REV_IN_Pos (5U) +#define CRC_CR_REV_IN_Msk (0x3UL << CRC_CR_REV_IN_Pos) /*!< 0x00000060 */ +#define CRC_CR_REV_IN CRC_CR_REV_IN_Msk /*!< REV_IN Reverse Input Data bits */ +#define CRC_CR_REV_IN_0 (0x1U << CRC_CR_REV_IN_Pos) /*!< 0x00000020 */ +#define CRC_CR_REV_IN_1 (0x2U << CRC_CR_REV_IN_Pos) /*!< 0x00000040 */ +#define CRC_CR_REV_OUT_Pos (7U) +#define CRC_CR_REV_OUT_Msk (0x1UL << CRC_CR_REV_OUT_Pos) /*!< 0x00000080 */ +#define CRC_CR_REV_OUT CRC_CR_REV_OUT_Msk /*!< REV_OUT Reverse Output Data bits */ + +/******************* Bit definition for CRC_INIT register *******************/ +#define CRC_INIT_INIT_Pos (0U) +#define CRC_INIT_INIT_Msk (0xFFFFFFFFUL << CRC_INIT_INIT_Pos) /*!< 0xFFFFFFFF */ +#define CRC_INIT_INIT CRC_INIT_INIT_Msk /*!< Initial CRC value bits */ + +/******************* Bit definition for CRC_POL register ********************/ +#define CRC_POL_POL_Pos (0U) +#define CRC_POL_POL_Msk (0xFFFFFFFFUL << CRC_POL_POL_Pos) /*!< 0xFFFFFFFF */ +#define CRC_POL_POL CRC_POL_POL_Msk /*!< Coefficients of the polynomial */ + +/******************************************************************************/ +/* */ +/* Advanced Encryption Standard (AES) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for AES_CR register *********************/ +#define AES_CR_EN_Pos (0U) +#define AES_CR_EN_Msk (0x1UL << AES_CR_EN_Pos) /*!< 0x00000001 */ +#define AES_CR_EN AES_CR_EN_Msk /*!< AES Enable */ +#define AES_CR_DATATYPE_Pos (1U) +#define AES_CR_DATATYPE_Msk (0x3UL << AES_CR_DATATYPE_Pos) /*!< 0x00000006 */ +#define AES_CR_DATATYPE AES_CR_DATATYPE_Msk /*!< Data type selection */ +#define AES_CR_DATATYPE_0 (0x1U << AES_CR_DATATYPE_Pos) /*!< 0x00000002 */ +#define AES_CR_DATATYPE_1 (0x2U << AES_CR_DATATYPE_Pos) /*!< 0x00000004 */ + +#define AES_CR_MODE_Pos (3U) +#define AES_CR_MODE_Msk (0x3UL << AES_CR_MODE_Pos) /*!< 0x00000018 */ +#define AES_CR_MODE AES_CR_MODE_Msk /*!< AES Mode Of Operation */ +#define AES_CR_MODE_0 (0x1U << AES_CR_MODE_Pos) /*!< 0x00000008 */ +#define AES_CR_MODE_1 (0x2U << AES_CR_MODE_Pos) /*!< 0x00000010 */ + +#define AES_CR_CHMOD_Pos (5U) +#define AES_CR_CHMOD_Msk (0x803UL << AES_CR_CHMOD_Pos) /*!< 0x00010060 */ +#define AES_CR_CHMOD AES_CR_CHMOD_Msk /*!< AES Chaining Mode */ +#define AES_CR_CHMOD_0 (0x001U << AES_CR_CHMOD_Pos) /*!< 0x00000020 */ +#define AES_CR_CHMOD_1 (0x002U << AES_CR_CHMOD_Pos) /*!< 0x00000040 */ +#define AES_CR_CHMOD_2 (0x800U << AES_CR_CHMOD_Pos) /*!< 0x00010000 */ + +#define AES_CR_CCFC_Pos (7U) +#define AES_CR_CCFC_Msk (0x1UL << AES_CR_CCFC_Pos) /*!< 0x00000080 */ +#define AES_CR_CCFC AES_CR_CCFC_Msk /*!< Computation Complete Flag Clear */ +#define AES_CR_ERRC_Pos (8U) +#define AES_CR_ERRC_Msk (0x1UL << AES_CR_ERRC_Pos) /*!< 0x00000100 */ +#define AES_CR_ERRC AES_CR_ERRC_Msk /*!< Error Clear */ +#define AES_CR_CCFIE_Pos (9U) +#define AES_CR_CCFIE_Msk (0x1UL << AES_CR_CCFIE_Pos) /*!< 0x00000200 */ +#define AES_CR_CCFIE AES_CR_CCFIE_Msk /*!< Computation Complete Flag Interrupt Enable */ +#define AES_CR_ERRIE_Pos (10U) +#define AES_CR_ERRIE_Msk (0x1UL << AES_CR_ERRIE_Pos) /*!< 0x00000400 */ +#define AES_CR_ERRIE AES_CR_ERRIE_Msk /*!< Error Interrupt Enable */ +#define AES_CR_DMAINEN_Pos (11U) +#define AES_CR_DMAINEN_Msk (0x1UL << AES_CR_DMAINEN_Pos) /*!< 0x00000800 */ +#define AES_CR_DMAINEN AES_CR_DMAINEN_Msk /*!< Enable data input phase DMA management */ +#define AES_CR_DMAOUTEN_Pos (12U) +#define AES_CR_DMAOUTEN_Msk (0x1UL << AES_CR_DMAOUTEN_Pos) /*!< 0x00001000 */ +#define AES_CR_DMAOUTEN AES_CR_DMAOUTEN_Msk /*!< Enable data output phase DMA management */ + +#define AES_CR_GCMPH_Pos (13U) +#define AES_CR_GCMPH_Msk (0x3UL << AES_CR_GCMPH_Pos) /*!< 0x00006000 */ +#define AES_CR_GCMPH AES_CR_GCMPH_Msk /*!< GCM Phase */ +#define AES_CR_GCMPH_0 (0x1U << AES_CR_GCMPH_Pos) /*!< 0x00002000 */ +#define AES_CR_GCMPH_1 (0x2U << AES_CR_GCMPH_Pos) /*!< 0x00004000 */ + +#define AES_CR_KEYSIZE_Pos (18U) +#define AES_CR_KEYSIZE_Msk (0x1UL << AES_CR_KEYSIZE_Pos) /*!< 0x00040000 */ +#define AES_CR_KEYSIZE AES_CR_KEYSIZE_Msk /*!< Key size selection */ + +#define AES_CR_NPBLB_Pos (20U) +#define AES_CR_NPBLB_Msk (0xFUL << AES_CR_NPBLB_Pos) /*!< 0x00F00000 */ +#define AES_CR_NPBLB AES_CR_NPBLB_Msk /*!< Number of padding bytes in last payload block */ +#define AES_CR_NPBLB_0 (0x1U << AES_CR_NPBLB_Pos) /*!< 0x00100000 */ +#define AES_CR_NPBLB_1 (0x2U << AES_CR_NPBLB_Pos) /*!< 0x00200000 */ +#define AES_CR_NPBLB_2 (0x4U << AES_CR_NPBLB_Pos) /*!< 0x00400000 */ +#define AES_CR_NPBLB_3 (0x8U << AES_CR_NPBLB_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for AES_SR register *********************/ +#define AES_SR_CCF_Pos (0U) +#define AES_SR_CCF_Msk (0x1UL << AES_SR_CCF_Pos) /*!< 0x00000001 */ +#define AES_SR_CCF AES_SR_CCF_Msk /*!< Computation Complete Flag */ +#define AES_SR_RDERR_Pos (1U) +#define AES_SR_RDERR_Msk (0x1UL << AES_SR_RDERR_Pos) /*!< 0x00000002 */ +#define AES_SR_RDERR AES_SR_RDERR_Msk /*!< Read Error Flag */ +#define AES_SR_WRERR_Pos (2U) +#define AES_SR_WRERR_Msk (0x1UL << AES_SR_WRERR_Pos) /*!< 0x00000004 */ +#define AES_SR_WRERR AES_SR_WRERR_Msk /*!< Write Error Flag */ +#define AES_SR_BUSY_Pos (3U) +#define AES_SR_BUSY_Msk (0x1UL << AES_SR_BUSY_Pos) /*!< 0x00000008 */ +#define AES_SR_BUSY AES_SR_BUSY_Msk /*!< Busy Flag */ + +/******************* Bit definition for AES_DINR register *******************/ +#define AES_DINR_Pos (0U) +#define AES_DINR_Msk (0xFFFFFFFFUL << AES_DINR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DINR AES_DINR_Msk /*!< AES Data Input Register */ + +/******************* Bit definition for AES_DOUTR register ******************/ +#define AES_DOUTR_Pos (0U) +#define AES_DOUTR_Msk (0xFFFFFFFFUL << AES_DOUTR_Pos) /*!< 0xFFFFFFFF */ +#define AES_DOUTR AES_DOUTR_Msk /*!< AES Data Output Register */ + +/******************* Bit definition for AES_KEYR0 register ******************/ +#define AES_KEYR0_Pos (0U) +#define AES_KEYR0_Msk (0xFFFFFFFFUL << AES_KEYR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR0 AES_KEYR0_Msk /*!< AES Key Register 0 */ + +/******************* Bit definition for AES_KEYR1 register ******************/ +#define AES_KEYR1_Pos (0U) +#define AES_KEYR1_Msk (0xFFFFFFFFUL << AES_KEYR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR1 AES_KEYR1_Msk /*!< AES Key Register 1 */ + +/******************* Bit definition for AES_KEYR2 register ******************/ +#define AES_KEYR2_Pos (0U) +#define AES_KEYR2_Msk (0xFFFFFFFFUL << AES_KEYR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR2 AES_KEYR2_Msk /*!< AES Key Register 2 */ + +/******************* Bit definition for AES_KEYR3 register ******************/ +#define AES_KEYR3_Pos (0U) +#define AES_KEYR3_Msk (0xFFFFFFFFUL << AES_KEYR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR3 AES_KEYR3_Msk /*!< AES Key Register 3 */ + +/******************* Bit definition for AES_KEYR4 register ******************/ +#define AES_KEYR4_Pos (0U) +#define AES_KEYR4_Msk (0xFFFFFFFFUL << AES_KEYR4_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR4 AES_KEYR4_Msk /*!< AES Key Register 4 */ + +/******************* Bit definition for AES_KEYR5 register ******************/ +#define AES_KEYR5_Pos (0U) +#define AES_KEYR5_Msk (0xFFFFFFFFUL << AES_KEYR5_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR5 AES_KEYR5_Msk /*!< AES Key Register 5 */ + +/******************* Bit definition for AES_KEYR6 register ******************/ +#define AES_KEYR6_Pos (0U) +#define AES_KEYR6_Msk (0xFFFFFFFFUL << AES_KEYR6_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR6 AES_KEYR6_Msk /*!< AES Key Register 6 */ + +/******************* Bit definition for AES_KEYR7 register ******************/ +#define AES_KEYR7_Pos (0U) +#define AES_KEYR7_Msk (0xFFFFFFFFUL << AES_KEYR7_Pos) /*!< 0xFFFFFFFF */ +#define AES_KEYR7 AES_KEYR7_Msk /*!< AES Key Register 7 */ + +/******************* Bit definition for AES_IVR0 register ******************/ +#define AES_IVR0_Pos (0U) +#define AES_IVR0_Msk (0xFFFFFFFFUL << AES_IVR0_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR0 AES_IVR0_Msk /*!< AES Initialization Vector Register 0 */ + +/******************* Bit definition for AES_IVR1 register ******************/ +#define AES_IVR1_Pos (0U) +#define AES_IVR1_Msk (0xFFFFFFFFUL << AES_IVR1_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR1 AES_IVR1_Msk /*!< AES Initialization Vector Register 1 */ + +/******************* Bit definition for AES_IVR2 register ******************/ +#define AES_IVR2_Pos (0U) +#define AES_IVR2_Msk (0xFFFFFFFFUL << AES_IVR2_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR2 AES_IVR2_Msk /*!< AES Initialization Vector Register 2 */ + +/******************* Bit definition for AES_IVR3 register ******************/ +#define AES_IVR3_Pos (0U) +#define AES_IVR3_Msk (0xFFFFFFFFUL << AES_IVR3_Pos) /*!< 0xFFFFFFFF */ +#define AES_IVR3 AES_IVR3_Msk /*!< AES Initialization Vector Register 3 */ + +/******************* Bit definition for AES_SUSP0R register ******************/ +#define AES_SUSP0R_Pos (0U) +#define AES_SUSP0R_Msk (0xFFFFFFFFUL << AES_SUSP0R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP0R AES_SUSP0R_Msk /*!< AES Suspend registers 0 */ + +/******************* Bit definition for AES_SUSP1R register ******************/ +#define AES_SUSP1R_Pos (0U) +#define AES_SUSP1R_Msk (0xFFFFFFFFUL << AES_SUSP1R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP1R AES_SUSP1R_Msk /*!< AES Suspend registers 1 */ + +/******************* Bit definition for AES_SUSP2R register ******************/ +#define AES_SUSP2R_Pos (0U) +#define AES_SUSP2R_Msk (0xFFFFFFFFUL << AES_SUSP2R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP2R AES_SUSP2R_Msk /*!< AES Suspend registers 2 */ + +/******************* Bit definition for AES_SUSP3R register ******************/ +#define AES_SUSP3R_Pos (0U) +#define AES_SUSP3R_Msk (0xFFFFFFFFUL << AES_SUSP3R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP3R AES_SUSP3R_Msk /*!< AES Suspend registers 3 */ + +/******************* Bit definition for AES_SUSP4R register ******************/ +#define AES_SUSP4R_Pos (0U) +#define AES_SUSP4R_Msk (0xFFFFFFFFUL << AES_SUSP4R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP4R AES_SUSP4R_Msk /*!< AES Suspend registers 4 */ + +/******************* Bit definition for AES_SUSP5R register ******************/ +#define AES_SUSP5R_Pos (0U) +#define AES_SUSP5R_Msk (0xFFFFFFFFUL << AES_SUSP5R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP5R AES_SUSP5R_Msk /*!< AES Suspend registers 5 */ + +/******************* Bit definition for AES_SUSP6R register ******************/ +#define AES_SUSP6R_Pos (0U) +#define AES_SUSP6R_Msk (0xFFFFFFFFUL << AES_SUSP6R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP6R AES_SUSP6R_Msk /*!< AES Suspend registers 6 */ + +/******************* Bit definition for AES_SUSP7R register ******************/ +#define AES_SUSP7R_Pos (0U) +#define AES_SUSP7R_Msk (0xFFFFFFFFUL << AES_SUSP7R_Pos) /*!< 0xFFFFFFFF */ +#define AES_SUSP7R AES_SUSP7R_Msk /*!< AES Suspend registers 7 */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1_Pos (0U) +#define DMA_ISR_GIF1_Msk (0x1UL << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ +#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1_Pos (1U) +#define DMA_ISR_TCIF1_Msk (0x1UL << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ +#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1_Pos (2U) +#define DMA_ISR_HTIF1_Msk (0x1UL << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ +#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1_Pos (3U) +#define DMA_ISR_TEIF1_Msk (0x1UL << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ +#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2_Pos (4U) +#define DMA_ISR_GIF2_Msk (0x1UL << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ +#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2_Pos (5U) +#define DMA_ISR_TCIF2_Msk (0x1UL << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ +#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2_Pos (6U) +#define DMA_ISR_HTIF2_Msk (0x1UL << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ +#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2_Pos (7U) +#define DMA_ISR_TEIF2_Msk (0x1UL << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ +#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3_Pos (8U) +#define DMA_ISR_GIF3_Msk (0x1UL << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ +#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3_Pos (9U) +#define DMA_ISR_TCIF3_Msk (0x1UL << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ +#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3_Pos (10U) +#define DMA_ISR_HTIF3_Msk (0x1UL << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ +#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3_Pos (11U) +#define DMA_ISR_TEIF3_Msk (0x1UL << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ +#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4_Pos (12U) +#define DMA_ISR_GIF4_Msk (0x1UL << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ +#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4_Pos (13U) +#define DMA_ISR_TCIF4_Msk (0x1UL << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ +#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4_Pos (14U) +#define DMA_ISR_HTIF4_Msk (0x1UL << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ +#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4_Pos (15U) +#define DMA_ISR_TEIF4_Msk (0x1UL << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ +#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5_Pos (16U) +#define DMA_ISR_GIF5_Msk (0x1UL << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ +#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5_Pos (17U) +#define DMA_ISR_TCIF5_Msk (0x1UL << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ +#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5_Pos (18U) +#define DMA_ISR_HTIF5_Msk (0x1UL << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ +#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5_Pos (19U) +#define DMA_ISR_TEIF5_Msk (0x1UL << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ +#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6_Pos (20U) +#define DMA_ISR_GIF6_Msk (0x1UL << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ +#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6_Pos (21U) +#define DMA_ISR_TCIF6_Msk (0x1UL << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ +#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6_Pos (22U) +#define DMA_ISR_HTIF6_Msk (0x1UL << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ +#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6_Pos (23U) +#define DMA_ISR_TEIF6_Msk (0x1UL << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ +#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7_Pos (24U) +#define DMA_ISR_GIF7_Msk (0x1UL << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ +#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7_Pos (25U) +#define DMA_ISR_TCIF7_Msk (0x1UL << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ +#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7_Pos (26U) +#define DMA_ISR_HTIF7_Msk (0x1UL << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ +#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7_Pos (27U) +#define DMA_ISR_TEIF7_Msk (0x1UL << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ +#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1_Pos (0U) +#define DMA_IFCR_CGIF1_Msk (0x1UL << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ +#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1_Pos (1U) +#define DMA_IFCR_CTCIF1_Msk (0x1UL << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ +#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1_Pos (2U) +#define DMA_IFCR_CHTIF1_Msk (0x1UL << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ +#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1_Pos (3U) +#define DMA_IFCR_CTEIF1_Msk (0x1UL << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ +#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2_Pos (4U) +#define DMA_IFCR_CGIF2_Msk (0x1UL << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ +#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2_Pos (5U) +#define DMA_IFCR_CTCIF2_Msk (0x1UL << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ +#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2_Pos (6U) +#define DMA_IFCR_CHTIF2_Msk (0x1UL << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ +#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2_Pos (7U) +#define DMA_IFCR_CTEIF2_Msk (0x1UL << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ +#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3_Pos (8U) +#define DMA_IFCR_CGIF3_Msk (0x1UL << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ +#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3_Pos (9U) +#define DMA_IFCR_CTCIF3_Msk (0x1UL << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ +#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3_Pos (10U) +#define DMA_IFCR_CHTIF3_Msk (0x1UL << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ +#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3_Pos (11U) +#define DMA_IFCR_CTEIF3_Msk (0x1UL << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ +#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4_Pos (12U) +#define DMA_IFCR_CGIF4_Msk (0x1UL << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ +#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4_Pos (13U) +#define DMA_IFCR_CTCIF4_Msk (0x1UL << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ +#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4_Pos (14U) +#define DMA_IFCR_CHTIF4_Msk (0x1UL << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ +#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4_Pos (15U) +#define DMA_IFCR_CTEIF4_Msk (0x1UL << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ +#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5_Pos (16U) +#define DMA_IFCR_CGIF5_Msk (0x1UL << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ +#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5_Pos (17U) +#define DMA_IFCR_CTCIF5_Msk (0x1UL << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ +#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5_Pos (18U) +#define DMA_IFCR_CHTIF5_Msk (0x1UL << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ +#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5_Pos (19U) +#define DMA_IFCR_CTEIF5_Msk (0x1UL << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ +#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6_Pos (20U) +#define DMA_IFCR_CGIF6_Msk (0x1UL << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ +#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6_Pos (21U) +#define DMA_IFCR_CTCIF6_Msk (0x1UL << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ +#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6_Pos (22U) +#define DMA_IFCR_CHTIF6_Msk (0x1UL << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ +#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6_Pos (23U) +#define DMA_IFCR_CTEIF6_Msk (0x1UL << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ +#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7_Pos (24U) +#define DMA_IFCR_CGIF7_Msk (0x1UL << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ +#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7_Pos (25U) +#define DMA_IFCR_CTCIF7_Msk (0x1UL << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ +#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7_Pos (26U) +#define DMA_IFCR_CHTIF7_Msk (0x1UL << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ +#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7_Pos (27U) +#define DMA_IFCR_CTEIF7_Msk (0x1UL << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ +#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register ********************/ +#define DMA_CCR_EN_Pos (0U) +#define DMA_CCR_EN_Msk (0x1UL << DMA_CCR_EN_Pos) /*!< 0x00000001 */ +#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ +#define DMA_CCR_TCIE_Pos (1U) +#define DMA_CCR_TCIE_Msk (0x1UL << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ +#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE_Pos (2U) +#define DMA_CCR_HTIE_Msk (0x1UL << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ +#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE_Pos (3U) +#define DMA_CCR_TEIE_Msk (0x1UL << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ +#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR_Pos (4U) +#define DMA_CCR_DIR_Msk (0x1UL << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ +#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ +#define DMA_CCR_CIRC_Pos (5U) +#define DMA_CCR_CIRC_Msk (0x1UL << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ +#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ +#define DMA_CCR_PINC_Pos (6U) +#define DMA_CCR_PINC_Msk (0x1UL << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ +#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ +#define DMA_CCR_MINC_Pos (7U) +#define DMA_CCR_MINC_Msk (0x1UL << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ +#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE_Pos (8U) +#define DMA_CCR_PSIZE_Msk (0x3UL << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ +#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ +#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ + +#define DMA_CCR_MSIZE_Pos (10U) +#define DMA_CCR_MSIZE_Msk (0x3UL << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ +#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ +#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ + +#define DMA_CCR_PL_Pos (12U) +#define DMA_CCR_PL_Msk (0x3UL << DMA_CCR_PL_Pos) /*!< 0x00003000 */ +#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level)*/ +#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ +#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ + +#define DMA_CCR_MEM2MEM_Pos (14U) +#define DMA_CCR_MEM2MEM_Msk (0x1UL << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ +#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR register *******************/ +#define DMA_CNDTR_NDT_Pos (0U) +#define DMA_CNDTR_NDT_Msk (0xFFFFUL << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ +#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR register ********************/ +#define DMA_CPAR_PA_Pos (0U) +#define DMA_CPAR_PA_Msk (0xFFFFFFFFUL << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR register ********************/ +#define DMA_CMAR_MA_Pos (0U) +#define DMA_CMAR_MA_Msk (0xFFFFFFFFUL << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ +#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* DMAMUX Controller */ +/* */ +/******************************************************************************/ +/******************** Bits definition for DMAMUX_CxCR register **************/ +#define DMAMUX_CxCR_DMAREQ_ID_Pos (0U) +#define DMAMUX_CxCR_DMAREQ_ID_Msk (0x3FUL << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x0000003F */ +#define DMAMUX_CxCR_DMAREQ_ID DMAMUX_CxCR_DMAREQ_ID_Msk /*!< DMA Request ID */ +#define DMAMUX_CxCR_DMAREQ_ID_0 (0x01U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_CxCR_DMAREQ_ID_1 (0x02U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_CxCR_DMAREQ_ID_2 (0x04U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_CxCR_DMAREQ_ID_3 (0x08U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_CxCR_DMAREQ_ID_4 (0x10U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_CxCR_DMAREQ_ID_5 (0x20U << DMAMUX_CxCR_DMAREQ_ID_Pos) /*!< 0x00000020 */ +#define DMAMUX_CxCR_SOIE_Pos (8U) +#define DMAMUX_CxCR_SOIE_Msk (0x1UL << DMAMUX_CxCR_SOIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_CxCR_SOIE DMAMUX_CxCR_SOIE_Msk /*!< Synchro overrun interrupt enable */ +#define DMAMUX_CxCR_EGE_Pos (9U) +#define DMAMUX_CxCR_EGE_Msk (0x1UL << DMAMUX_CxCR_EGE_Pos) /*!< 0x00000200 */ +#define DMAMUX_CxCR_EGE DMAMUX_CxCR_EGE_Msk /*!< Event generation interrupt enable */ +#define DMAMUX_CxCR_SE_Pos (16U) +#define DMAMUX_CxCR_SE_Msk (0x1UL << DMAMUX_CxCR_SE_Pos) /*!< 0x00010000 */ +#define DMAMUX_CxCR_SE DMAMUX_CxCR_SE_Msk /*!< Synchronization enable */ +#define DMAMUX_CxCR_SPOL_Pos (17U) +#define DMAMUX_CxCR_SPOL_Msk (0x3UL << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_CxCR_SPOL DMAMUX_CxCR_SPOL_Msk /*!< Synchronization polarity */ +#define DMAMUX_CxCR_SPOL_0 (0x1U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_CxCR_SPOL_1 (0x2U << DMAMUX_CxCR_SPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_CxCR_NBREQ_Pos (19U) +#define DMAMUX_CxCR_NBREQ_Msk (0x1FUL << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_CxCR_NBREQ DMAMUX_CxCR_NBREQ_Msk /*!< Number of request */ +#define DMAMUX_CxCR_NBREQ_0 (0x01U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_CxCR_NBREQ_1 (0x02U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_CxCR_NBREQ_2 (0x04U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_CxCR_NBREQ_3 (0x08U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_CxCR_NBREQ_4 (0x10U << DMAMUX_CxCR_NBREQ_Pos) /*!< 0x00800000 */ +#define DMAMUX_CxCR_SYNC_ID_Pos (24U) +#define DMAMUX_CxCR_SYNC_ID_Msk (0x1FUL << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x1F000000 */ +#define DMAMUX_CxCR_SYNC_ID DMAMUX_CxCR_SYNC_ID_Msk /*!< Synchronization ID */ +#define DMAMUX_CxCR_SYNC_ID_0 (0x01U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x01000000 */ +#define DMAMUX_CxCR_SYNC_ID_1 (0x02U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x02000000 */ +#define DMAMUX_CxCR_SYNC_ID_2 (0x04U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x04000000 */ +#define DMAMUX_CxCR_SYNC_ID_3 (0x08U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x08000000 */ +#define DMAMUX_CxCR_SYNC_ID_4 (0x10U << DMAMUX_CxCR_SYNC_ID_Pos) /*!< 0x10000000 */ + +/******************* Bits definition for DMAMUX_CSR register **************/ +#define DMAMUX_CSR_SOF0_Pos (0U) +#define DMAMUX_CSR_SOF0_Msk (0x1UL << DMAMUX_CSR_SOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0_Msk /*!< Synchronization Overrun Flag 0 */ +#define DMAMUX_CSR_SOF1_Pos (1U) +#define DMAMUX_CSR_SOF1_Msk (0x1UL << DMAMUX_CSR_SOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1_Msk /*!< Synchronization Overrun Flag 1 */ +#define DMAMUX_CSR_SOF2_Pos (2U) +#define DMAMUX_CSR_SOF2_Msk (0x1UL << DMAMUX_CSR_SOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2_Msk /*!< Synchronization Overrun Flag 2 */ +#define DMAMUX_CSR_SOF3_Pos (3U) +#define DMAMUX_CSR_SOF3_Msk (0x1UL << DMAMUX_CSR_SOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3_Msk /*!< Synchronization Overrun Flag 3 */ +#define DMAMUX_CSR_SOF4_Pos (4U) +#define DMAMUX_CSR_SOF4_Msk (0x1UL << DMAMUX_CSR_SOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4_Msk /*!< Synchronization Overrun Flag 4 */ +#define DMAMUX_CSR_SOF5_Pos (5U) +#define DMAMUX_CSR_SOF5_Msk (0x1UL << DMAMUX_CSR_SOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5_Msk /*!< Synchronization Overrun Flag 5 */ +#define DMAMUX_CSR_SOF6_Pos (6U) +#define DMAMUX_CSR_SOF6_Msk (0x1UL << DMAMUX_CSR_SOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6_Msk /*!< Synchronization Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_CFR register **************/ +#define DMAMUX_CFR_CSOF0_Pos (0U) +#define DMAMUX_CFR_CSOF0_Msk (0x1UL << DMAMUX_CFR_CSOF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0_Msk /*!< Clear Overrun Flag 0 */ +#define DMAMUX_CFR_CSOF1_Pos (1U) +#define DMAMUX_CFR_CSOF1_Msk (0x1UL << DMAMUX_CFR_CSOF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1_Msk /*!< Clear Overrun Flag 1 */ +#define DMAMUX_CFR_CSOF2_Pos (2U) +#define DMAMUX_CFR_CSOF2_Msk (0x1UL << DMAMUX_CFR_CSOF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2_Msk /*!< Clear Overrun Flag 2 */ +#define DMAMUX_CFR_CSOF3_Pos (3U) +#define DMAMUX_CFR_CSOF3_Msk (0x1UL << DMAMUX_CFR_CSOF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3_Msk /*!< Clear Overrun Flag 3 */ +#define DMAMUX_CFR_CSOF4_Pos (4U) +#define DMAMUX_CFR_CSOF4_Msk (0x1UL << DMAMUX_CFR_CSOF4_Pos) /*!< 0x00000010 */ +#define DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4_Msk /*!< Clear Overrun Flag 4 */ +#define DMAMUX_CFR_CSOF5_Pos (5U) +#define DMAMUX_CFR_CSOF5_Msk (0x1UL << DMAMUX_CFR_CSOF5_Pos) /*!< 0x00000020 */ +#define DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5_Msk /*!< Clear Overrun Flag 5 */ +#define DMAMUX_CFR_CSOF6_Pos (6U) +#define DMAMUX_CFR_CSOF6_Msk (0x1UL << DMAMUX_CFR_CSOF6_Pos) /*!< 0x00000040 */ +#define DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6_Msk /*!< Clear Overrun Flag 6 */ + +/******************** Bits definition for DMAMUX_RGxCR register ************/ +#define DMAMUX_RGxCR_SIG_ID_Pos (0U) +#define DMAMUX_RGxCR_SIG_ID_Msk (0x1FUL << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x0000001F */ +#define DMAMUX_RGxCR_SIG_ID DMAMUX_RGxCR_SIG_ID_Msk /*!< Signal ID */ +#define DMAMUX_RGxCR_SIG_ID_0 (0x01U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGxCR_SIG_ID_1 (0x02U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGxCR_SIG_ID_2 (0x04U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGxCR_SIG_ID_3 (0x08U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGxCR_SIG_ID_4 (0x10U << DMAMUX_RGxCR_SIG_ID_Pos) /*!< 0x00000010 */ +#define DMAMUX_RGxCR_OIE_Pos (8U) +#define DMAMUX_RGxCR_OIE_Msk (0x1UL << DMAMUX_RGxCR_OIE_Pos) /*!< 0x00000100 */ +#define DMAMUX_RGxCR_OIE DMAMUX_RGxCR_OIE_Msk /*!< Overrun interrupt enable */ +#define DMAMUX_RGxCR_GE_Pos (16U) +#define DMAMUX_RGxCR_GE_Msk (0x1UL << DMAMUX_RGxCR_GE_Pos) /*!< 0x00010000 */ +#define DMAMUX_RGxCR_GE DMAMUX_RGxCR_GE_Msk /*!< Generation enable */ +#define DMAMUX_RGxCR_GPOL_Pos (17U) +#define DMAMUX_RGxCR_GPOL_Msk (0x3UL << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00060000 */ +#define DMAMUX_RGxCR_GPOL DMAMUX_RGxCR_GPOL_Msk /*!< Generation polarity */ +#define DMAMUX_RGxCR_GPOL_0 (0x1U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00020000 */ +#define DMAMUX_RGxCR_GPOL_1 (0x2U << DMAMUX_RGxCR_GPOL_Pos) /*!< 0x00040000 */ +#define DMAMUX_RGxCR_GNBREQ_Pos (19U) +#define DMAMUX_RGxCR_GNBREQ_Msk (0x1FUL << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00F80000 */ +#define DMAMUX_RGxCR_GNBREQ DMAMUX_RGxCR_GNBREQ_Msk /*!< Number of request */ +#define DMAMUX_RGxCR_GNBREQ_0 (0x01U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00080000 */ +#define DMAMUX_RGxCR_GNBREQ_1 (0x02U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00100000 */ +#define DMAMUX_RGxCR_GNBREQ_2 (0x04U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00200000 */ +#define DMAMUX_RGxCR_GNBREQ_3 (0x08U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00400000 */ +#define DMAMUX_RGxCR_GNBREQ_4 (0x10U << DMAMUX_RGxCR_GNBREQ_Pos) /*!< 0x00800000 */ + +/******************** Bits definition for DMAMUX_RGSR register **************/ +#define DMAMUX_RGSR_OF0_Pos (0U) +#define DMAMUX_RGSR_OF0_Msk (0x1UL << DMAMUX_RGSR_OF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGSR_OF0 DMAMUX_RGSR_OF0_Msk /*!< Overrun flag 0 */ +#define DMAMUX_RGSR_OF1_Pos (1U) +#define DMAMUX_RGSR_OF1_Msk (0x1UL << DMAMUX_RGSR_OF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGSR_OF1 DMAMUX_RGSR_OF1_Msk /*!< Overrun flag 1 */ +#define DMAMUX_RGSR_OF2_Pos (2U) +#define DMAMUX_RGSR_OF2_Msk (0x1UL << DMAMUX_RGSR_OF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGSR_OF2 DMAMUX_RGSR_OF2_Msk /*!< Overrun flag 2 */ +#define DMAMUX_RGSR_OF3_Pos (3U) +#define DMAMUX_RGSR_OF3_Msk (0x1UL << DMAMUX_RGSR_OF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGSR_OF3 DMAMUX_RGSR_OF3_Msk /*!< Overrun flag 3 */ + +/******************** Bits definition for DMAMUX_RGCFR register **************/ +#define DMAMUX_RGCFR_COF0_Pos (0U) +#define DMAMUX_RGCFR_COF0_Msk (0x1UL << DMAMUX_RGCFR_COF0_Pos) /*!< 0x00000001 */ +#define DMAMUX_RGCFR_COF0 DMAMUX_RGCFR_COF0_Msk /*!< Clear Overrun flag 0 */ +#define DMAMUX_RGCFR_COF1_Pos (1U) +#define DMAMUX_RGCFR_COF1_Msk (0x1UL << DMAMUX_RGCFR_COF1_Pos) /*!< 0x00000002 */ +#define DMAMUX_RGCFR_COF1 DMAMUX_RGCFR_COF1_Msk /*!< Clear Overrun flag 1 */ +#define DMAMUX_RGCFR_COF2_Pos (2U) +#define DMAMUX_RGCFR_COF2_Msk (0x1UL << DMAMUX_RGCFR_COF2_Pos) /*!< 0x00000004 */ +#define DMAMUX_RGCFR_COF2 DMAMUX_RGCFR_COF2_Msk /*!< Clear Overrun flag 2 */ +#define DMAMUX_RGCFR_COF3_Pos (3U) +#define DMAMUX_RGCFR_COF3_Msk (0x1UL << DMAMUX_RGCFR_COF3_Pos) /*!< 0x00000008 */ +#define DMAMUX_RGCFR_COF3 DMAMUX_RGCFR_COF3_Msk /*!< Clear Overrun flag 3 */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for EXTI_RTSR1 register ******************/ +#define EXTI_RTSR1_RT_Pos (0U) +#define EXTI_RTSR1_RT_Msk (0x803FFFFFUL << EXTI_RTSR1_RT_Pos) /*!< 0x803FFFFF */ +#define EXTI_RTSR1_RT EXTI_RTSR1_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR1_RT0_Pos (0U) +#define EXTI_RTSR1_RT0_Msk (0x1UL << EXTI_RTSR1_RT0_Pos) /*!< 0x00000001 */ +#define EXTI_RTSR1_RT0 EXTI_RTSR1_RT0_Msk /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR1_RT1_Pos (1U) +#define EXTI_RTSR1_RT1_Msk (0x1UL << EXTI_RTSR1_RT1_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR1_RT1 EXTI_RTSR1_RT1_Msk /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR1_RT2_Pos (2U) +#define EXTI_RTSR1_RT2_Msk (0x1UL << EXTI_RTSR1_RT2_Pos) /*!< 0x00000004 */ +#define EXTI_RTSR1_RT2 EXTI_RTSR1_RT2_Msk /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR1_RT3_Pos (3U) +#define EXTI_RTSR1_RT3_Msk (0x1UL << EXTI_RTSR1_RT3_Pos) /*!< 0x00000008 */ +#define EXTI_RTSR1_RT3 EXTI_RTSR1_RT3_Msk /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR1_RT4_Pos (4U) +#define EXTI_RTSR1_RT4_Msk (0x1UL << EXTI_RTSR1_RT4_Pos) /*!< 0x00000010 */ +#define EXTI_RTSR1_RT4 EXTI_RTSR1_RT4_Msk /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR1_RT5_Pos (5U) +#define EXTI_RTSR1_RT5_Msk (0x1UL << EXTI_RTSR1_RT5_Pos) /*!< 0x00000020 */ +#define EXTI_RTSR1_RT5 EXTI_RTSR1_RT5_Msk /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR1_RT6_Pos (6U) +#define EXTI_RTSR1_RT6_Msk (0x1UL << EXTI_RTSR1_RT6_Pos) /*!< 0x00000040 */ +#define EXTI_RTSR1_RT6 EXTI_RTSR1_RT6_Msk /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR1_RT7_Pos (7U) +#define EXTI_RTSR1_RT7_Msk (0x1UL << EXTI_RTSR1_RT7_Pos) /*!< 0x00000080 */ +#define EXTI_RTSR1_RT7 EXTI_RTSR1_RT7_Msk /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR1_RT8_Pos (8U) +#define EXTI_RTSR1_RT8_Msk (0x1UL << EXTI_RTSR1_RT8_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR1_RT8 EXTI_RTSR1_RT8_Msk /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR1_RT9_Pos (9U) +#define EXTI_RTSR1_RT9_Msk (0x1UL << EXTI_RTSR1_RT9_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR1_RT9 EXTI_RTSR1_RT9_Msk /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR1_RT10_Pos (10U) +#define EXTI_RTSR1_RT10_Msk (0x1UL << EXTI_RTSR1_RT10_Pos) /*!< 0x00000400 */ +#define EXTI_RTSR1_RT10 EXTI_RTSR1_RT10_Msk /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR1_RT11_Pos (11U) +#define EXTI_RTSR1_RT11_Msk (0x1UL << EXTI_RTSR1_RT11_Pos) /*!< 0x00000800 */ +#define EXTI_RTSR1_RT11 EXTI_RTSR1_RT11_Msk /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR1_RT12_Pos (12U) +#define EXTI_RTSR1_RT12_Msk (0x1UL << EXTI_RTSR1_RT12_Pos) /*!< 0x00001000 */ +#define EXTI_RTSR1_RT12 EXTI_RTSR1_RT12_Msk /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR1_RT13_Pos (13U) +#define EXTI_RTSR1_RT13_Msk (0x1UL << EXTI_RTSR1_RT13_Pos) /*!< 0x00002000 */ +#define EXTI_RTSR1_RT13 EXTI_RTSR1_RT13_Msk /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR1_RT14_Pos (14U) +#define EXTI_RTSR1_RT14_Msk (0x1UL << EXTI_RTSR1_RT14_Pos) /*!< 0x00004000 */ +#define EXTI_RTSR1_RT14 EXTI_RTSR1_RT14_Msk /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR1_RT15_Pos (15U) +#define EXTI_RTSR1_RT15_Msk (0x1UL << EXTI_RTSR1_RT15_Pos) /*!< 0x00008000 */ +#define EXTI_RTSR1_RT15 EXTI_RTSR1_RT15_Msk /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR1_RT16_Pos (16U) +#define EXTI_RTSR1_RT16_Msk (0x1UL << EXTI_RTSR1_RT16_Pos) /*!< 0x00010000 */ +#define EXTI_RTSR1_RT16 EXTI_RTSR1_RT16_Msk /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR1_RT17_Pos (17U) +#define EXTI_RTSR1_RT17_Msk (0x1UL << EXTI_RTSR1_RT17_Pos) /*!< 0x00020000 */ +#define EXTI_RTSR1_RT17 EXTI_RTSR1_RT17_Msk /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR1_RT18_Pos (18U) +#define EXTI_RTSR1_RT18_Msk (0x1UL << EXTI_RTSR1_RT18_Pos) /*!< 0x00040000 */ +#define EXTI_RTSR1_RT18 EXTI_RTSR1_RT18_Msk /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR1_RT19_Pos (19U) +#define EXTI_RTSR1_RT19_Msk (0x1UL << EXTI_RTSR1_RT19_Pos) /*!< 0x00080000 */ +#define EXTI_RTSR1_RT19 EXTI_RTSR1_RT19_Msk /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR1_RT20_Pos (20U) +#define EXTI_RTSR1_RT20_Msk (0x1UL << EXTI_RTSR1_RT20_Pos) /*!< 0x00100000 */ +#define EXTI_RTSR1_RT20 EXTI_RTSR1_RT20_Msk /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR1_RT31_Pos (31U) +#define EXTI_RTSR1_RT31_Msk (0x1UL << EXTI_RTSR1_RT31_Pos) /*!< 0x80000000 */ +#define EXTI_RTSR1_RT31 EXTI_RTSR1_RT31_Msk /*!< Rising trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_FTSR1 register ******************/ +#define EXTI_FTSR1_FT_Pos (0U) +#define EXTI_FTSR1_FT_Msk (0x803FFFFFUL << EXTI_FTSR1_FT_Pos) /*!< 0x803FFFFF */ +#define EXTI_FTSR1_FT EXTI_FTSR1_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR1_FT0_Pos (0U) +#define EXTI_FTSR1_FT0_Msk (0x1UL << EXTI_FTSR1_FT0_Pos) /*!< 0x00000001 */ +#define EXTI_FTSR1_FT0 EXTI_FTSR1_FT0_Msk /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR1_FT1_Pos (1U) +#define EXTI_FTSR1_FT1_Msk (0x1UL << EXTI_FTSR1_FT1_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR1_FT1 EXTI_FTSR1_FT1_Msk /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR1_FT2_Pos (2U) +#define EXTI_FTSR1_FT2_Msk (0x1UL << EXTI_FTSR1_FT2_Pos) /*!< 0x00000004 */ +#define EXTI_FTSR1_FT2 EXTI_FTSR1_FT2_Msk /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR1_FT3_Pos (3U) +#define EXTI_FTSR1_FT3_Msk (0x1UL << EXTI_FTSR1_FT3_Pos) /*!< 0x00000008 */ +#define EXTI_FTSR1_FT3 EXTI_FTSR1_FT3_Msk /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR1_FT4_Pos (4U) +#define EXTI_FTSR1_FT4_Msk (0x1UL << EXTI_FTSR1_FT4_Pos) /*!< 0x00000010 */ +#define EXTI_FTSR1_FT4 EXTI_FTSR1_FT4_Msk /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR1_FT5_Pos (5U) +#define EXTI_FTSR1_FT5_Msk (0x1UL << EXTI_FTSR1_FT5_Pos) /*!< 0x00000020 */ +#define EXTI_FTSR1_FT5 EXTI_FTSR1_FT5_Msk /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR1_FT6_Pos (6U) +#define EXTI_FTSR1_FT6_Msk (0x1UL << EXTI_FTSR1_FT6_Pos) /*!< 0x00000040 */ +#define EXTI_FTSR1_FT6 EXTI_FTSR1_FT6_Msk /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR1_FT7_Pos (7U) +#define EXTI_FTSR1_FT7_Msk (0x1UL << EXTI_FTSR1_FT7_Pos) /*!< 0x00000080 */ +#define EXTI_FTSR1_FT7 EXTI_FTSR1_FT7_Msk /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR1_FT8_Pos (8U) +#define EXTI_FTSR1_FT8_Msk (0x1UL << EXTI_FTSR1_FT8_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR1_FT8 EXTI_FTSR1_FT8_Msk /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR1_FT9_Pos (9U) +#define EXTI_FTSR1_FT9_Msk (0x1UL << EXTI_FTSR1_FT9_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR1_FT9 EXTI_FTSR1_FT9_Msk /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR1_FT10_Pos (10U) +#define EXTI_FTSR1_FT10_Msk (0x1UL << EXTI_FTSR1_FT10_Pos) /*!< 0x00000400 */ +#define EXTI_FTSR1_FT10 EXTI_FTSR1_FT10_Msk /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR1_FT11_Pos (11U) +#define EXTI_FTSR1_FT11_Msk (0x1UL << EXTI_FTSR1_FT11_Pos) /*!< 0x00000800 */ +#define EXTI_FTSR1_FT11 EXTI_FTSR1_FT11_Msk /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR1_FT12_Pos (12U) +#define EXTI_FTSR1_FT12_Msk (0x1UL << EXTI_FTSR1_FT12_Pos) /*!< 0x00001000 */ +#define EXTI_FTSR1_FT12 EXTI_FTSR1_FT12_Msk /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR1_FT13_Pos (13U) +#define EXTI_FTSR1_FT13_Msk (0x1UL << EXTI_FTSR1_FT13_Pos) /*!< 0x00002000 */ +#define EXTI_FTSR1_FT13 EXTI_FTSR1_FT13_Msk /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR1_FT14_Pos (14U) +#define EXTI_FTSR1_FT14_Msk (0x1UL << EXTI_FTSR1_FT14_Pos) /*!< 0x00004000 */ +#define EXTI_FTSR1_FT14 EXTI_FTSR1_FT14_Msk /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR1_FT15_Pos (15U) +#define EXTI_FTSR1_FT15_Msk (0x1UL << EXTI_FTSR1_FT15_Pos) /*!< 0x00008000 */ +#define EXTI_FTSR1_FT15 EXTI_FTSR1_FT15_Msk /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR1_FT16_Pos (16U) +#define EXTI_FTSR1_FT16_Msk (0x1UL << EXTI_FTSR1_FT16_Pos) /*!< 0x00010000 */ +#define EXTI_FTSR1_FT16 EXTI_FTSR1_FT16_Msk /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR1_FT17_Pos (17U) +#define EXTI_FTSR1_FT17_Msk (0x1UL << EXTI_FTSR1_FT17_Pos) /*!< 0x00020000 */ +#define EXTI_FTSR1_FT17 EXTI_FTSR1_FT17_Msk /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR1_FT18_Pos (18U) +#define EXTI_FTSR1_FT18_Msk (0x1UL << EXTI_FTSR1_FT18_Pos) /*!< 0x00040000 */ +#define EXTI_FTSR1_FT18 EXTI_FTSR1_FT18_Msk /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR1_FT19_Pos (19U) +#define EXTI_FTSR1_FT19_Msk (0x1UL << EXTI_FTSR1_FT19_Pos) /*!< 0x00080000 */ +#define EXTI_FTSR1_FT19 EXTI_FTSR1_FT19_Msk /*!< Falling trigger event configuration bit of line 19 */ +#define EXTI_FTSR1_FT20_Pos (20U) +#define EXTI_FTSR1_FT20_Msk (0x1UL << EXTI_FTSR1_FT20_Pos) /*!< 0x00100000 */ +#define EXTI_FTSR1_FT20 EXTI_FTSR1_FT20_Msk /*!< Falling trigger event configuration bit of line 20 */ +#define EXTI_FTSR1_FT31_Pos (31U) +#define EXTI_FTSR1_FT31_Msk (0x1UL << EXTI_FTSR1_FT31_Pos) /*!< 0x80000000 */ +#define EXTI_FTSR1_FT31 EXTI_FTSR1_FT31_Msk /*!< Falling trigger event configuration bit of line 31 */ + +/****************** Bit definition for EXTI_SWIER1 register *****************/ +#define EXTI_SWIER1_SWI_Pos (0U) +#define EXTI_SWIER1_SWI_Msk (0x803FFFFFUL << EXTI_SWIER1_SWI_Pos) /*!< 0x803FFFFF */ +#define EXTI_SWIER1_SWI EXTI_SWIER1_SWI_Msk /*!< Software interrupt */ +#define EXTI_SWIER1_SWI0_Pos (0U) +#define EXTI_SWIER1_SWI0_Msk (0x1UL << EXTI_SWIER1_SWI0_Pos) /*!< 0x00000001 */ +#define EXTI_SWIER1_SWI0 EXTI_SWIER1_SWI0_Msk /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER1_SWI1_Pos (1U) +#define EXTI_SWIER1_SWI1_Msk (0x1UL << EXTI_SWIER1_SWI1_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER1_SWI1 EXTI_SWIER1_SWI1_Msk /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER1_SWI2_Pos (2U) +#define EXTI_SWIER1_SWI2_Msk (0x1UL << EXTI_SWIER1_SWI2_Pos) /*!< 0x00000004 */ +#define EXTI_SWIER1_SWI2 EXTI_SWIER1_SWI2_Msk /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER1_SWI3_Pos (3U) +#define EXTI_SWIER1_SWI3_Msk (0x1UL << EXTI_SWIER1_SWI3_Pos) /*!< 0x00000008 */ +#define EXTI_SWIER1_SWI3 EXTI_SWIER1_SWI3_Msk /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER1_SWI4_Pos (4U) +#define EXTI_SWIER1_SWI4_Msk (0x1UL << EXTI_SWIER1_SWI4_Pos) /*!< 0x00000010 */ +#define EXTI_SWIER1_SWI4 EXTI_SWIER1_SWI4_Msk /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER1_SWI5_Pos (5U) +#define EXTI_SWIER1_SWI5_Msk (0x1UL << EXTI_SWIER1_SWI5_Pos) /*!< 0x00000020 */ +#define EXTI_SWIER1_SWI5 EXTI_SWIER1_SWI5_Msk /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER1_SWI6_Pos (6U) +#define EXTI_SWIER1_SWI6_Msk (0x1UL << EXTI_SWIER1_SWI6_Pos) /*!< 0x00000040 */ +#define EXTI_SWIER1_SWI6 EXTI_SWIER1_SWI6_Msk /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER1_SWI7_Pos (7U) +#define EXTI_SWIER1_SWI7_Msk (0x1UL << EXTI_SWIER1_SWI7_Pos) /*!< 0x00000080 */ +#define EXTI_SWIER1_SWI7 EXTI_SWIER1_SWI7_Msk /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER1_SWI8_Pos (8U) +#define EXTI_SWIER1_SWI8_Msk (0x1UL << EXTI_SWIER1_SWI8_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER1_SWI8 EXTI_SWIER1_SWI8_Msk /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER1_SWI9_Pos (9U) +#define EXTI_SWIER1_SWI9_Msk (0x1UL << EXTI_SWIER1_SWI9_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER1_SWI9 EXTI_SWIER1_SWI9_Msk /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER1_SWI10_Pos (10U) +#define EXTI_SWIER1_SWI10_Msk (0x1UL << EXTI_SWIER1_SWI10_Pos) /*!< 0x00000400 */ +#define EXTI_SWIER1_SWI10 EXTI_SWIER1_SWI10_Msk /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER1_SWI11_Pos (11U) +#define EXTI_SWIER1_SWI11_Msk (0x1UL << EXTI_SWIER1_SWI11_Pos) /*!< 0x00000800 */ +#define EXTI_SWIER1_SWI11 EXTI_SWIER1_SWI11_Msk /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER1_SWI12_Pos (12U) +#define EXTI_SWIER1_SWI12_Msk (0x1UL << EXTI_SWIER1_SWI12_Pos) /*!< 0x00001000 */ +#define EXTI_SWIER1_SWI12 EXTI_SWIER1_SWI12_Msk /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER1_SWI13_Pos (13U) +#define EXTI_SWIER1_SWI13_Msk (0x1UL << EXTI_SWIER1_SWI13_Pos) /*!< 0x00002000 */ +#define EXTI_SWIER1_SWI13 EXTI_SWIER1_SWI13_Msk /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER1_SWI14_Pos (14U) +#define EXTI_SWIER1_SWI14_Msk (0x1UL << EXTI_SWIER1_SWI14_Pos) /*!< 0x00004000 */ +#define EXTI_SWIER1_SWI14 EXTI_SWIER1_SWI14_Msk /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER1_SWI15_Pos (15U) +#define EXTI_SWIER1_SWI15_Msk (0x1UL << EXTI_SWIER1_SWI15_Pos) /*!< 0x00008000 */ +#define EXTI_SWIER1_SWI15 EXTI_SWIER1_SWI15_Msk /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER1_SWI16_Pos (16U) +#define EXTI_SWIER1_SWI16_Msk (0x1UL << EXTI_SWIER1_SWI16_Pos) /*!< 0x00010000 */ +#define EXTI_SWIER1_SWI16 EXTI_SWIER1_SWI16_Msk /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER1_SWI17_Pos (17U) +#define EXTI_SWIER1_SWI17_Msk (0x1UL << EXTI_SWIER1_SWI17_Pos) /*!< 0x00020000 */ +#define EXTI_SWIER1_SWI17 EXTI_SWIER1_SWI17_Msk /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER1_SWI18_Pos (18U) +#define EXTI_SWIER1_SWI18_Msk (0x1UL << EXTI_SWIER1_SWI18_Pos) /*!< 0x00040000 */ +#define EXTI_SWIER1_SWI18 EXTI_SWIER1_SWI18_Msk /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER1_SWI19_Pos (19U) +#define EXTI_SWIER1_SWI19_Msk (0x1UL << EXTI_SWIER1_SWI19_Pos) /*!< 0x00080000 */ +#define EXTI_SWIER1_SWI19 EXTI_SWIER1_SWI19_Msk /*!< Software Interrupt on line 19 */ +#define EXTI_SWIER1_SWI20_Pos (20U) +#define EXTI_SWIER1_SWI20_Msk (0x1UL << EXTI_SWIER1_SWI20_Pos) /*!< 0x00100000 */ +#define EXTI_SWIER1_SWI20 EXTI_SWIER1_SWI20_Msk /*!< Software Interrupt on line 20 */ +#define EXTI_SWIER1_SWI31_Pos (31U) +#define EXTI_SWIER1_SWI31_Msk (0x1UL << EXTI_SWIER1_SWI31_Pos) /*!< 0x80000000 */ +#define EXTI_SWIER1_SWI31 EXTI_SWIER1_SWI31_Msk /*!< Software Interrupt on line 31 */ + +/******************* Bit definition for EXTI_PR1 register *******************/ +#define EXTI_PR1_PIF_Pos (0U) +#define EXTI_PR1_PIF_Msk (0x803FFFFFUL << EXTI_PR1_PIF_Pos) /*!< 0x803FFFFF */ +#define EXTI_PR1_PIF EXTI_PR1_PIF_Msk /*!< Pending bit */ +#define EXTI_PR1_PIF0_Pos (0U) +#define EXTI_PR1_PIF0_Msk (0x1UL << EXTI_PR1_PIF0_Pos) /*!< 0x00000001 */ +#define EXTI_PR1_PIF0 EXTI_PR1_PIF0_Msk /*!< Pending bit for line 0 */ +#define EXTI_PR1_PIF1_Pos (1U) +#define EXTI_PR1_PIF1_Msk (0x1UL << EXTI_PR1_PIF1_Pos) /*!< 0x00000002 */ +#define EXTI_PR1_PIF1 EXTI_PR1_PIF1_Msk /*!< Pending bit for line 1 */ +#define EXTI_PR1_PIF2_Pos (2U) +#define EXTI_PR1_PIF2_Msk (0x1UL << EXTI_PR1_PIF2_Pos) /*!< 0x00000004 */ +#define EXTI_PR1_PIF2 EXTI_PR1_PIF2_Msk /*!< Pending bit for line 2 */ +#define EXTI_PR1_PIF3_Pos (3U) +#define EXTI_PR1_PIF3_Msk (0x1UL << EXTI_PR1_PIF3_Pos) /*!< 0x00000008 */ +#define EXTI_PR1_PIF3 EXTI_PR1_PIF3_Msk /*!< Pending bit for line 3 */ +#define EXTI_PR1_PIF4_Pos (4U) +#define EXTI_PR1_PIF4_Msk (0x1UL << EXTI_PR1_PIF4_Pos) /*!< 0x00000010 */ +#define EXTI_PR1_PIF4 EXTI_PR1_PIF4_Msk /*!< Pending bit for line 4 */ +#define EXTI_PR1_PIF5_Pos (5U) +#define EXTI_PR1_PIF5_Msk (0x1UL << EXTI_PR1_PIF5_Pos) /*!< 0x00000020 */ +#define EXTI_PR1_PIF5 EXTI_PR1_PIF5_Msk /*!< Pending bit for line 5 */ +#define EXTI_PR1_PIF6_Pos (6U) +#define EXTI_PR1_PIF6_Msk (0x1UL << EXTI_PR1_PIF6_Pos) /*!< 0x00000040 */ +#define EXTI_PR1_PIF6 EXTI_PR1_PIF6_Msk /*!< Pending bit for line 6 */ +#define EXTI_PR1_PIF7_Pos (7U) +#define EXTI_PR1_PIF7_Msk (0x1UL << EXTI_PR1_PIF7_Pos) /*!< 0x00000080 */ +#define EXTI_PR1_PIF7 EXTI_PR1_PIF7_Msk /*!< Pending bit for line 7 */ +#define EXTI_PR1_PIF8_Pos (8U) +#define EXTI_PR1_PIF8_Msk (0x1UL << EXTI_PR1_PIF8_Pos) /*!< 0x00000100 */ +#define EXTI_PR1_PIF8 EXTI_PR1_PIF8_Msk /*!< Pending bit for line 8 */ +#define EXTI_PR1_PIF9_Pos (9U) +#define EXTI_PR1_PIF9_Msk (0x1UL << EXTI_PR1_PIF9_Pos) /*!< 0x00000200 */ +#define EXTI_PR1_PIF9 EXTI_PR1_PIF9_Msk /*!< Pending bit for line 9 */ +#define EXTI_PR1_PIF10_Pos (10U) +#define EXTI_PR1_PIF10_Msk (0x1UL << EXTI_PR1_PIF10_Pos) /*!< 0x00000400 */ +#define EXTI_PR1_PIF10 EXTI_PR1_PIF10_Msk /*!< Pending bit for line 10 */ +#define EXTI_PR1_PIF11_Pos (11U) +#define EXTI_PR1_PIF11_Msk (0x1UL << EXTI_PR1_PIF11_Pos) /*!< 0x00000800 */ +#define EXTI_PR1_PIF11 EXTI_PR1_PIF11_Msk /*!< Pending bit for line 11 */ +#define EXTI_PR1_PIF12_Pos (12U) +#define EXTI_PR1_PIF12_Msk (0x1UL << EXTI_PR1_PIF12_Pos) /*!< 0x00001000 */ +#define EXTI_PR1_PIF12 EXTI_PR1_PIF12_Msk /*!< Pending bit for line 12 */ +#define EXTI_PR1_PIF13_Pos (13U) +#define EXTI_PR1_PIF13_Msk (0x1UL << EXTI_PR1_PIF13_Pos) /*!< 0x00002000 */ +#define EXTI_PR1_PIF13 EXTI_PR1_PIF13_Msk /*!< Pending bit for line 13 */ +#define EXTI_PR1_PIF14_Pos (14U) +#define EXTI_PR1_PIF14_Msk (0x1UL << EXTI_PR1_PIF14_Pos) /*!< 0x00004000 */ +#define EXTI_PR1_PIF14 EXTI_PR1_PIF14_Msk /*!< Pending bit for line 14 */ +#define EXTI_PR1_PIF15_Pos (15U) +#define EXTI_PR1_PIF15_Msk (0x1UL << EXTI_PR1_PIF15_Pos) /*!< 0x00008000 */ +#define EXTI_PR1_PIF15 EXTI_PR1_PIF15_Msk /*!< Pending bit for line 15 */ +#define EXTI_PR1_PIF16_Pos (16U) +#define EXTI_PR1_PIF16_Msk (0x1UL << EXTI_PR1_PIF16_Pos) /*!< 0x00010000 */ +#define EXTI_PR1_PIF16 EXTI_PR1_PIF16_Msk /*!< Pending bit for line 16 */ +#define EXTI_PR1_PIF17_Pos (17U) +#define EXTI_PR1_PIF17_Msk (0x1UL << EXTI_PR1_PIF17_Pos) /*!< 0x00020000 */ +#define EXTI_PR1_PIF17 EXTI_PR1_PIF17_Msk /*!< Pending bit for line 17 */ +#define EXTI_PR1_PIF18_Pos (18U) +#define EXTI_PR1_PIF18_Msk (0x1UL << EXTI_PR1_PIF18_Pos) /*!< 0x00040000 */ +#define EXTI_PR1_PIF18 EXTI_PR1_PIF18_Msk /*!< Pending bit for line 18 */ +#define EXTI_PR1_PIF19_Pos (19U) +#define EXTI_PR1_PIF19_Msk (0x1UL << EXTI_PR1_PIF19_Pos) /*!< 0x00080000 */ +#define EXTI_PR1_PIF19 EXTI_PR1_PIF19_Msk /*!< Pending bit for line 19 */ +#define EXTI_PR1_PIF20_Pos (20U) +#define EXTI_PR1_PIF20_Msk (0x1UL << EXTI_PR1_PIF20_Pos) /*!< 0x00100000 */ +#define EXTI_PR1_PIF20 EXTI_PR1_PIF20_Msk /*!< Pending bit for line 20 */ +#define EXTI_PR1_PIF31_Pos (31U) +#define EXTI_PR1_PIF31_Msk (0x1UL << EXTI_PR1_PIF31_Pos) /*!< 0x80000000 */ +#define EXTI_PR1_PIF31 EXTI_PR1_PIF31_Msk /*!< Pending bit for line 31 */ + +/****************** Bit definition for EXTI_RTSR2 register ******************/ +#define EXTI_RTSR2_RT_Pos (0U) +#define EXTI_RTSR2_RT_Msk (0x302UL << EXTI_RTSR2_RT_Pos) /*!< 0x00000302 */ +#define EXTI_RTSR2_RT EXTI_RTSR2_RT_Msk /*!< Rising trigger event configuration bit */ +#define EXTI_RTSR2_RT33_Pos (1U) +#define EXTI_RTSR2_RT33_Msk (0x1UL << EXTI_RTSR2_RT33_Pos) /*!< 0x00000002 */ +#define EXTI_RTSR2_RT33 EXTI_RTSR2_RT33_Msk /*!< Rising trigger event configuration bit of line 33 */ +#define EXTI_RTSR2_RT40_Pos (8U) +#define EXTI_RTSR2_RT40_Msk (0x1UL << EXTI_RTSR2_RT40_Pos) /*!< 0x00000100 */ +#define EXTI_RTSR2_RT40 EXTI_RTSR2_RT40_Msk /*!< Rising trigger event configuration bit of line 40 */ +#define EXTI_RTSR2_RT41_Pos (9U) +#define EXTI_RTSR2_RT41_Msk (0x1UL << EXTI_RTSR2_RT41_Pos) /*!< 0x00000200 */ +#define EXTI_RTSR2_RT41 EXTI_RTSR2_RT41_Msk /*!< Rising trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_FTSR2 register ******************/ +#define EXTI_FTSR2_FT_Pos (0U) +#define EXTI_FTSR2_FT_Msk (0x302UL << EXTI_FTSR2_FT_Pos) /*!< 0x00000302 */ +#define EXTI_FTSR2_FT EXTI_FTSR2_FT_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_FTSR2_FT33_Pos (1U) +#define EXTI_FTSR2_FT33_Msk (0x1UL << EXTI_FTSR2_FT33_Pos) /*!< 0x00000002 */ +#define EXTI_FTSR2_FT33 EXTI_FTSR2_FT33_Msk /*!< Falling trigger event configuration bit of line 33 */ +#define EXTI_FTSR2_FT40_Pos (8U) +#define EXTI_FTSR2_FT40_Msk (0x1UL << EXTI_FTSR2_FT40_Pos) /*!< 0x00000100 */ +#define EXTI_FTSR2_FT40 EXTI_FTSR2_FT40_Msk /*!< Falling trigger event configuration bit of line 40 */ +#define EXTI_FTSR2_FT41_Pos (9U) +#define EXTI_FTSR2_FT41_Msk (0x1UL << EXTI_FTSR2_FT41_Pos) /*!< 0x00000200 */ +#define EXTI_FTSR2_FT41 EXTI_FTSR2_FT41_Msk /*!< Falling trigger event configuration bit of line 41 */ + +/****************** Bit definition for EXTI_SWIER2 register *****************/ +#define EXTI_SWIER2_SWI_Pos (0U) +#define EXTI_SWIER2_SWI_Msk (0x302UL << EXTI_SWIER2_SWI_Pos) /*!< 0x00000302 */ +#define EXTI_SWIER2_SWI EXTI_SWIER2_SWI_Msk /*!< Falling trigger event configuration bit */ +#define EXTI_SWIER2_SWI33_Pos (1U) +#define EXTI_SWIER2_SWI33_Msk (0x1UL << EXTI_SWIER2_SWI33_Pos) /*!< 0x00000002 */ +#define EXTI_SWIER2_SWI33 EXTI_SWIER2_SWI33_Msk /*!< Software Interrupt on line 33 */ +#define EXTI_SWIER2_SWI40_Pos (8U) +#define EXTI_SWIER2_SWI40_Msk (0x1UL << EXTI_SWIER2_SWI40_Pos) /*!< 0x00000100 */ +#define EXTI_SWIER2_SWI40 EXTI_SWIER2_SWI40_Msk /*!< Software Interrupt on line 40 */ +#define EXTI_SWIER2_SWI41_Pos (9U) +#define EXTI_SWIER2_SWI41_Msk (0x1UL << EXTI_SWIER2_SWI41_Pos) /*!< 0x00000200 */ +#define EXTI_SWIER2_SWI41 EXTI_SWIER2_SWI41_Msk /*!< Software Interrupt on line 41 */ + +/******************* Bit definition for EXTI_PR2 register *******************/ +#define EXTI_PR2_PIF_Pos (0U) +#define EXTI_PR2_PIF_Msk (0x302UL << EXTI_PR2_PIF_Pos) /*!< 0x00000302 */ +#define EXTI_PR2_PIF EXTI_PR2_PIF_Msk /*!< Pending bit */ +#define EXTI_PR2_PIF33_Pos (1U) +#define EXTI_PR2_PIF33_Msk (0x1UL << EXTI_PR2_PIF33_Pos) /*!< 0x00000002 */ +#define EXTI_PR2_PIF33 EXTI_PR2_PIF33_Msk /*!< Pending bit for line 33 */ +#define EXTI_PR2_PIF40_Pos (8U) +#define EXTI_PR2_PIF40_Msk (0x1UL << EXTI_PR2_PIF40_Pos) /*!< 0x00000100 */ +#define EXTI_PR2_PIF40 EXTI_PR2_PIF40_Msk /*!< Pending bit for line 40 */ +#define EXTI_PR2_PIF41_Pos (9U) +#define EXTI_PR2_PIF41_Msk (0x1UL << EXTI_PR2_PIF41_Pos) /*!< 0x00000200 */ +#define EXTI_PR2_PIF41 EXTI_PR2_PIF41_Msk /*!< Pending bit for line 41 */ + +/******************** Bits definition for EXTI_IMR1 register ****************/ +#define EXTI_IMR1_Pos (0U) +#define EXTI_IMR1_Msk (0xFFFFFFFFUL << EXTI_IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_IMR1_IM EXTI_IMR1_Msk /*!< CPU1 wakeup with interrupt Mask on Event */ +#define EXTI_IMR1_IM0_Pos (0U) +#define EXTI_IMR1_IM0_Msk (0x1UL << EXTI_IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_IMR1_IM0 EXTI_IMR1_IM0_Msk /*!< CPU1 Interrupt Mask on line 0 */ +#define EXTI_IMR1_IM1_Pos (1U) +#define EXTI_IMR1_IM1_Msk (0x1UL << EXTI_IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_IMR1_IM1 EXTI_IMR1_IM1_Msk /*!< CPU1 Interrupt Mask on line 1 */ +#define EXTI_IMR1_IM2_Pos (2U) +#define EXTI_IMR1_IM2_Msk (0x1UL << EXTI_IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_IMR1_IM2 EXTI_IMR1_IM2_Msk /*!< CPU1 Interrupt Mask on line 2 */ +#define EXTI_IMR1_IM3_Pos (3U) +#define EXTI_IMR1_IM3_Msk (0x1UL << EXTI_IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_IMR1_IM3 EXTI_IMR1_IM3_Msk /*!< CPU1 Interrupt Mask on line 3 */ +#define EXTI_IMR1_IM4_Pos (4U) +#define EXTI_IMR1_IM4_Msk (0x1UL << EXTI_IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_IMR1_IM4 EXTI_IMR1_IM4_Msk /*!< CPU1 Interrupt Mask on line 4 */ +#define EXTI_IMR1_IM5_Pos (5U) +#define EXTI_IMR1_IM5_Msk (0x1UL << EXTI_IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_IMR1_IM5 EXTI_IMR1_IM5_Msk /*!< CPU1 Interrupt Mask on line 5 */ +#define EXTI_IMR1_IM6_Pos (6U) +#define EXTI_IMR1_IM6_Msk (0x1UL << EXTI_IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_IMR1_IM6 EXTI_IMR1_IM6_Msk /*!< CPU1 Interrupt Mask on line 6 */ +#define EXTI_IMR1_IM7_Pos (7U) +#define EXTI_IMR1_IM7_Msk (0x1UL << EXTI_IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_IMR1_IM7 EXTI_IMR1_IM7_Msk /*!< CPU1 Interrupt Mask on line 7 */ +#define EXTI_IMR1_IM8_Pos (8U) +#define EXTI_IMR1_IM8_Msk (0x1UL << EXTI_IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_IMR1_IM8 EXTI_IMR1_IM8_Msk /*!< CPU1 Interrupt Mask on line 8 */ +#define EXTI_IMR1_IM9_Pos (9U) +#define EXTI_IMR1_IM9_Msk (0x1UL << EXTI_IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_IMR1_IM9 EXTI_IMR1_IM9_Msk /*!< CPU1 Interrupt Mask on line 9 */ +#define EXTI_IMR1_IM10_Pos (10U) +#define EXTI_IMR1_IM10_Msk (0x1UL << EXTI_IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_IMR1_IM10 EXTI_IMR1_IM10_Msk /*!< CPU1 Interrupt Mask on line 10 */ +#define EXTI_IMR1_IM11_Pos (11U) +#define EXTI_IMR1_IM11_Msk (0x1UL << EXTI_IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_IMR1_IM11 EXTI_IMR1_IM11_Msk /*!< CPU1 Interrupt Mask on line 11 */ +#define EXTI_IMR1_IM12_Pos (12U) +#define EXTI_IMR1_IM12_Msk (0x1UL << EXTI_IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_IMR1_IM12 EXTI_IMR1_IM12_Msk /*!< CPU1 Interrupt Mask on line 12 */ +#define EXTI_IMR1_IM13_Pos (13U) +#define EXTI_IMR1_IM13_Msk (0x1UL << EXTI_IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_IMR1_IM13 EXTI_IMR1_IM13_Msk /*!< CPU1 Interrupt Mask on line 13 */ +#define EXTI_IMR1_IM14_Pos (14U) +#define EXTI_IMR1_IM14_Msk (0x1UL << EXTI_IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_IMR1_IM14 EXTI_IMR1_IM14_Msk /*!< CPU1 Interrupt Mask on line 14 */ +#define EXTI_IMR1_IM15_Pos (15U) +#define EXTI_IMR1_IM15_Msk (0x1UL << EXTI_IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_IMR1_IM15 EXTI_IMR1_IM15_Msk /*!< CPU1 Interrupt Mask on line 15 */ +#define EXTI_IMR1_IM16_Pos (16U) +#define EXTI_IMR1_IM16_Msk (0x1UL << EXTI_IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_IMR1_IM16 EXTI_IMR1_IM16_Msk /*!< CPU1 Interrupt Mask on line 16 */ +#define EXTI_IMR1_IM17_Pos (17U) +#define EXTI_IMR1_IM17_Msk (0x1UL << EXTI_IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_IMR1_IM17 EXTI_IMR1_IM17_Msk /*!< CPU1 Interrupt Mask on line 17 */ +#define EXTI_IMR1_IM18_Pos (18U) +#define EXTI_IMR1_IM18_Msk (0x1UL << EXTI_IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_IMR1_IM18 EXTI_IMR1_IM18_Msk /*!< CPU1 Interrupt Mask on line 18 */ +#define EXTI_IMR1_IM19_Pos (19U) +#define EXTI_IMR1_IM19_Msk (0x1UL << EXTI_IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_IMR1_IM19 EXTI_IMR1_IM19_Msk /*!< CPU1 Interrupt Mask on line 19 */ +#define EXTI_IMR1_IM20_Pos (20U) +#define EXTI_IMR1_IM20_Msk (0x1UL << EXTI_IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_IMR1_IM20 EXTI_IMR1_IM20_Msk /*!< CPU1 Interrupt Mask on line 20 */ +#define EXTI_IMR1_IM22_Pos (22U) +#define EXTI_IMR1_IM22_Msk (0x1UL << EXTI_IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_IMR1_IM22 EXTI_IMR1_IM22_Msk /*!< CPU1 Interrupt Mask on line 22 */ +#define EXTI_IMR1_IM24_Pos (24U) +#define EXTI_IMR1_IM24_Msk (0x1UL << EXTI_IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_IMR1_IM24 EXTI_IMR1_IM24_Msk /*!< CPU1 Interrupt Mask on line 24 */ +#define EXTI_IMR1_IM25_Pos (25U) +#define EXTI_IMR1_IM25_Msk (0x1UL << EXTI_IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_IMR1_IM25 EXTI_IMR1_IM25_Msk /*!< CPU1 Interrupt Mask on line 25 */ +#define EXTI_IMR1_IM29_Pos (29U) +#define EXTI_IMR1_IM29_Msk (0x1UL << EXTI_IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_IMR1_IM29 EXTI_IMR1_IM29_Msk /*!< CPU1 Interrupt Mask on line 29 */ +#define EXTI_IMR1_IM30_Pos (30U) +#define EXTI_IMR1_IM30_Msk (0x1UL << EXTI_IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_IMR1_IM30 EXTI_IMR1_IM30_Msk /*!< CPU1 Interrupt Mask on line 30 */ +#define EXTI_IMR1_IM31_Pos (31U) +#define EXTI_IMR1_IM31_Msk (0x1UL << EXTI_IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_IMR1_IM31 EXTI_IMR1_IM31_Msk /*!< CPU1 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_EMR1 register ****************/ +#define EXTI_EMR1_Pos (0U) +#define EXTI_EMR1_Msk (0x003EFFFFUL << EXTI_EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_EMR1_EM EXTI_EMR1_Msk /*!< CPU1 Event Mask */ +#define EXTI_EMR1_EM0_Pos (0U) +#define EXTI_EMR1_EM0_Msk (0x1UL << EXTI_EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_EMR1_EM0 EXTI_EMR1_EM0_Msk /*!< CPU1 Event Mask on line 0 */ +#define EXTI_EMR1_EM1_Pos (1U) +#define EXTI_EMR1_EM1_Msk (0x1UL << EXTI_EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_EMR1_EM1 EXTI_EMR1_EM1_Msk /*!< CPU1 Event Mask on line 1 */ +#define EXTI_EMR1_EM2_Pos (2U) +#define EXTI_EMR1_EM2_Msk (0x1UL << EXTI_EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_EMR1_EM2 EXTI_EMR1_EM2_Msk /*!< CPU1 Event Mask on line 2 */ +#define EXTI_EMR1_EM3_Pos (3U) +#define EXTI_EMR1_EM3_Msk (0x1UL << EXTI_EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_EMR1_EM3 EXTI_EMR1_EM3_Msk /*!< CPU1 Event Mask on line 3 */ +#define EXTI_EMR1_EM4_Pos (4U) +#define EXTI_EMR1_EM4_Msk (0x1UL << EXTI_EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_EMR1_EM4 EXTI_EMR1_EM4_Msk /*!< CPU1 Event Mask on line 4 */ +#define EXTI_EMR1_EM5_Pos (5U) +#define EXTI_EMR1_EM5_Msk (0x1UL << EXTI_EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_EMR1_EM5 EXTI_EMR1_EM5_Msk /*!< CPU1 Event Mask on line 5 */ +#define EXTI_EMR1_EM6_Pos (6U) +#define EXTI_EMR1_EM6_Msk (0x1UL << EXTI_EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_EMR1_EM6 EXTI_EMR1_EM6_Msk /*!< CPU1 Event Mask on line 6 */ +#define EXTI_EMR1_EM7_Pos (7U) +#define EXTI_EMR1_EM7_Msk (0x1UL << EXTI_EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_EMR1_EM7 EXTI_EMR1_EM7_Msk /*!< CPU1 Event Mask on line 7 */ +#define EXTI_EMR1_EM8_Pos (8U) +#define EXTI_EMR1_EM8_Msk (0x1UL << EXTI_EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_EMR1_EM8 EXTI_EMR1_EM8_Msk /*!< CPU1 Event Mask on line 8 */ +#define EXTI_EMR1_EM9_Pos (9U) +#define EXTI_EMR1_EM9_Msk (0x1UL << EXTI_EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_EMR1_EM9 EXTI_EMR1_EM9_Msk /*!< CPU1 Event Mask on line 9 */ +#define EXTI_EMR1_EM10_Pos (10U) +#define EXTI_EMR1_EM10_Msk (0x1UL << EXTI_EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_EMR1_EM10 EXTI_EMR1_EM10_Msk /*!< CPU1 Event Mask on line 10 */ +#define EXTI_EMR1_EM11_Pos (11U) +#define EXTI_EMR1_EM11_Msk (0x1UL << EXTI_EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_EMR1_EM11 EXTI_EMR1_EM11_Msk /*!< CPU1 Event Mask on line 11 */ +#define EXTI_EMR1_EM12_Pos (12U) +#define EXTI_EMR1_EM12_Msk (0x1UL << EXTI_EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_EMR1_EM12 EXTI_EMR1_EM12_Msk /*!< CPU1 Event Mask on line 12 */ +#define EXTI_EMR1_EM13_Pos (13U) +#define EXTI_EMR1_EM13_Msk (0x1UL << EXTI_EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_EMR1_EM13 EXTI_EMR1_EM13_Msk /*!< CPU1 Event Mask on line 13 */ +#define EXTI_EMR1_EM14_Pos (14U) +#define EXTI_EMR1_EM14_Msk (0x1UL << EXTI_EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_EMR1_EM14 EXTI_EMR1_EM14_Msk /*!< CPU1 Event Mask on line 14 */ +#define EXTI_EMR1_EM15_Pos (15U) +#define EXTI_EMR1_EM15_Msk (0x1UL << EXTI_EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_EMR1_EM15 EXTI_EMR1_EM15_Msk /*!< CPU1 Event Mask on line 15 */ +#define EXTI_EMR1_EM17_Pos (17U) +#define EXTI_EMR1_EM17_Msk (0x1UL << EXTI_EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_EMR1_EM17 EXTI_EMR1_EM17_Msk /*!< CPU1 Event Mask on line 17 */ +#define EXTI_EMR1_EM18_Pos (18U) +#define EXTI_EMR1_EM18_Msk (0x1UL << EXTI_EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_EMR1_EM18 EXTI_EMR1_EM18_Msk /*!< CPU1 Event Mask on line 18 */ +#define EXTI_EMR1_EM19_Pos (19U) +#define EXTI_EMR1_EM19_Msk (0x1UL << EXTI_EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_EMR1_EM19 EXTI_EMR1_EM19_Msk /*!< CPU1 Event Mask on line 19 */ +#define EXTI_EMR1_EM20_Pos (20U) +#define EXTI_EMR1_EM20_Msk (0x1UL << EXTI_EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_EMR1_EM20 EXTI_EMR1_EM20_Msk /*!< CPU1 Event Mask on line 20 */ + +/******************** Bits definition for EXTI_IMR2 register ****************/ +#define EXTI_IMR2_Pos (0U) +#define EXTI_IMR2_Msk (0x0001FFFFUL << EXTI_IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_IMR2_IM EXTI_IMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_IMR2_IM33_Pos (1U) +#define EXTI_IMR2_IM33_Msk (0x1UL << EXTI_IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_IMR2_IM33 EXTI_IMR2_IM33_Msk /*!< CPU1 Interrupt Mask on line 33 */ +#define EXTI_IMR2_IM36_Pos (4U) +#define EXTI_IMR2_IM36_Msk (0x1UL << EXTI_IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_IMR2_IM36 EXTI_IMR2_IM36_Msk /*!< CPU1 Interrupt Mask on line 36 */ +#define EXTI_IMR2_IM37_Pos (5U) +#define EXTI_IMR2_IM37_Msk (0x1UL << EXTI_IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_IMR2_IM37 EXTI_IMR2_IM37_Msk /*!< CPU1 Interrupt Mask on line 37 */ +#define EXTI_IMR2_IM38_Pos (6U) +#define EXTI_IMR2_IM38_Msk (0x1UL << EXTI_IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_IMR2_IM38 EXTI_IMR2_IM38_Msk /*!< CPU1 Interrupt Mask on line 38 */ +#define EXTI_IMR2_IM39_Pos (7U) +#define EXTI_IMR2_IM39_Msk (0x1UL << EXTI_IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_IMR2_IM39 EXTI_IMR2_IM39_Msk /*!< CPU1 Interrupt Mask on line 39 */ +#define EXTI_IMR2_IM40_Pos (8U) +#define EXTI_IMR2_IM40_Msk (0x1UL << EXTI_IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_IMR2_IM40 EXTI_IMR2_IM40_Msk /*!< CPU1 Interrupt Mask on line 40 */ +#define EXTI_IMR2_IM41_Pos (9U) +#define EXTI_IMR2_IM41_Msk (0x1UL << EXTI_IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_IMR2_IM41 EXTI_IMR2_IM41_Msk /*!< CPU1 Interrupt Mask on line 41 */ +#define EXTI_IMR2_IM42_Pos (10U) +#define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ +#define EXTI_IMR2_IM44_Pos (12U) +#define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ +#define EXTI_IMR2_IM45_Pos (13U) +#define EXTI_IMR2_IM45_Msk (0x1UL << EXTI_IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_IMR2_IM45 EXTI_IMR2_IM45_Msk /*!< CPU1 Interrupt Mask on line 45 */ +#define EXTI_IMR2_IM48_Pos (16U) +#define EXTI_IMR2_IM48_Msk (0x1UL << EXTI_IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_IMR2_IM48 EXTI_IMR2_IM48_Msk /*!< CPU1 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_EMR2 register ****************/ +#define EXTI_EMR2_Pos (0U) +#define EXTI_EMR2_Msk (0x00000300UL << EXTI_EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_EMR2_EM EXTI_EMR2_Msk /*!< CPU1 Interrupt Mask */ +#define EXTI_EMR2_EM40_Pos (8U) +#define EXTI_EMR2_EM40_Msk (0x1UL << EXTI_EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_EMR2_EM40 EXTI_EMR2_EM40_Msk /*!< CPU1 Event Mask on line 40 */ +#define EXTI_EMR2_EM41_Pos (9U) +#define EXTI_EMR2_EM41_Msk (0x1UL << EXTI_EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_EMR2_EM41 EXTI_EMR2_EM41_Msk /*!< CPU1 Event Mask on line 41 */ + +/******************** Bits definition for EXTI_C2IMR1 register **************/ +#define EXTI_C2IMR1_Pos (0U) +#define EXTI_C2IMR1_Msk (0xFFFFFFFFUL << EXTI_C2IMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2IMR1_IM EXTI_C2IMR1_Msk /*!< CPU2 wakeup with interrupt Mask on Event */ +#define EXTI_C2IMR1_IM0_Pos (0U) +#define EXTI_C2IMR1_IM0_Msk (0x1UL << EXTI_C2IMR1_IM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2IMR1_IM0 EXTI_C2IMR1_IM0_Msk /*!< CPU2 Interrupt Mask on line 0 */ +#define EXTI_C2IMR1_IM1_Pos (1U) +#define EXTI_C2IMR1_IM1_Msk (0x1UL << EXTI_C2IMR1_IM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR1_IM1 EXTI_C2IMR1_IM1_Msk /*!< CPU2 Interrupt Mask on line 1 */ +#define EXTI_C2IMR1_IM2_Pos (2U) +#define EXTI_C2IMR1_IM2_Msk (0x1UL << EXTI_C2IMR1_IM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2IMR1_IM2 EXTI_C2IMR1_IM2_Msk /*!< CPU2 Interrupt Mask on line 2 */ +#define EXTI_C2IMR1_IM3_Pos (3U) +#define EXTI_C2IMR1_IM3_Msk (0x1UL << EXTI_C2IMR1_IM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2IMR1_IM3 EXTI_C2IMR1_IM3_Msk /*!< CPU2 Interrupt Mask on line 3 */ +#define EXTI_C2IMR1_IM4_Pos (4U) +#define EXTI_C2IMR1_IM4_Msk (0x1UL << EXTI_C2IMR1_IM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR1_IM4 EXTI_C2IMR1_IM4_Msk /*!< CPU2 Interrupt Mask on line 4 */ +#define EXTI_C2IMR1_IM5_Pos (5U) +#define EXTI_C2IMR1_IM5_Msk (0x1UL << EXTI_C2IMR1_IM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR1_IM5 EXTI_C2IMR1_IM5_Msk /*!< CPU2 Interrupt Mask on line 5 */ +#define EXTI_C2IMR1_IM6_Pos (6U) +#define EXTI_C2IMR1_IM6_Msk (0x1UL << EXTI_C2IMR1_IM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR1_IM6 EXTI_C2IMR1_IM6_Msk /*!< CPU2 Interrupt Mask on line 6 */ +#define EXTI_C2IMR1_IM7_Pos (7U) +#define EXTI_C2IMR1_IM7_Msk (0x1UL << EXTI_C2IMR1_IM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR1_IM7 EXTI_C2IMR1_IM7_Msk /*!< CPU2 Interrupt Mask on line 7 */ +#define EXTI_C2IMR1_IM8_Pos (8U) +#define EXTI_C2IMR1_IM8_Msk (0x1UL << EXTI_C2IMR1_IM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR1_IM8 EXTI_C2IMR1_IM8_Msk /*!< CPU2 Interrupt Mask on line 8 */ +#define EXTI_C2IMR1_IM9_Pos (9U) +#define EXTI_C2IMR1_IM9_Msk (0x1UL << EXTI_C2IMR1_IM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR1_IM9 EXTI_C2IMR1_IM9_Msk /*!< CPU2 Interrupt Mask on line 9 */ +#define EXTI_C2IMR1_IM10_Pos (10U) +#define EXTI_C2IMR1_IM10_Msk (0x1UL << EXTI_C2IMR1_IM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR1_IM10 EXTI_C2IMR1_IM10_Msk /*!< CPU2 Interrupt Mask on line 10 */ +#define EXTI_C2IMR1_IM11_Pos (11U) +#define EXTI_C2IMR1_IM11_Msk (0x1UL << EXTI_C2IMR1_IM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2IMR1_IM11 EXTI_C2IMR1_IM11_Msk /*!< CPU2 Interrupt Mask on line 11 */ +#define EXTI_C2IMR1_IM12_Pos (12U) +#define EXTI_C2IMR1_IM12_Msk (0x1UL << EXTI_C2IMR1_IM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR1_IM12 EXTI_C2IMR1_IM12_Msk /*!< CPU2 Interrupt Mask on line 12 */ +#define EXTI_C2IMR1_IM13_Pos (13U) +#define EXTI_C2IMR1_IM13_Msk (0x1UL << EXTI_C2IMR1_IM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR1_IM13 EXTI_C2IMR1_IM13_Msk /*!< CPU2 Interrupt Mask on line 13 */ +#define EXTI_C2IMR1_IM14_Pos (14U) +#define EXTI_C2IMR1_IM14_Msk (0x1UL << EXTI_C2IMR1_IM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2IMR1_IM14 EXTI_C2IMR1_IM14_Msk /*!< CPU2 Interrupt Mask on line 14 */ +#define EXTI_C2IMR1_IM15_Pos (15U) +#define EXTI_C2IMR1_IM15_Msk (0x1UL << EXTI_C2IMR1_IM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2IMR1_IM15 EXTI_C2IMR1_IM15_Msk /*!< CPU2 Interrupt Mask on line 15 */ +#define EXTI_C2IMR1_IM16_Pos (16U) +#define EXTI_C2IMR1_IM16_Msk (0x1UL << EXTI_C2IMR1_IM16_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR1_IM16 EXTI_C2IMR1_IM16_Msk /*!< CPU2 Interrupt Mask on line 16 */ +#define EXTI_C2IMR1_IM17_Pos (17U) +#define EXTI_C2IMR1_IM17_Msk (0x1UL << EXTI_C2IMR1_IM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2IMR1_IM17 EXTI_C2IMR1_IM17_Msk /*!< CPU2 Interrupt Mask on line 17 */ +#define EXTI_C2IMR1_IM18_Pos (18U) +#define EXTI_C2IMR1_IM18_Msk (0x1UL << EXTI_C2IMR1_IM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2IMR1_IM18 EXTI_C2IMR1_IM18_Msk /*!< CPU2 Interrupt Mask on line 18 */ +#define EXTI_C2IMR1_IM19_Pos (19U) +#define EXTI_C2IMR1_IM19_Msk (0x1UL << EXTI_C2IMR1_IM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2IMR1_IM19 EXTI_C2IMR1_IM19_Msk /*!< CPU2 Interrupt Mask on line 19 */ +#define EXTI_C2IMR1_IM20_Pos (20U) +#define EXTI_C2IMR1_IM20_Msk (0x1UL << EXTI_C2IMR1_IM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2IMR1_IM20 EXTI_C2IMR1_IM20_Msk /*!< CPU2 Interrupt Mask on line 20 */ +#define EXTI_C2IMR1_IM22_Pos (22U) +#define EXTI_C2IMR1_IM22_Msk (0x1UL << EXTI_C2IMR1_IM22_Pos) /*!< 0x00400000 */ +#define EXTI_C2IMR1_IM22 EXTI_C2IMR1_IM22_Msk /*!< CPU2 Interrupt Mask on line 22 */ +#define EXTI_C2IMR1_IM24_Pos (24U) +#define EXTI_C2IMR1_IM24_Msk (0x1UL << EXTI_C2IMR1_IM24_Pos) /*!< 0x01000000 */ +#define EXTI_C2IMR1_IM24 EXTI_C2IMR1_IM24_Msk /*!< CPU2 Interrupt Mask on line 24 */ +#define EXTI_C2IMR1_IM25_Pos (25U) +#define EXTI_C2IMR1_IM25_Msk (0x1UL << EXTI_C2IMR1_IM25_Pos) /*!< 0x02000000 */ +#define EXTI_C2IMR1_IM25 EXTI_C2IMR1_IM25_Msk /*!< CPU2 Interrupt Mask on line 25 */ +#define EXTI_C2IMR1_IM29_Pos (29U) +#define EXTI_C2IMR1_IM29_Msk (0x1UL << EXTI_C2IMR1_IM29_Pos) /*!< 0x20000000 */ +#define EXTI_C2IMR1_IM29 EXTI_C2IMR1_IM29_Msk /*!< CPU2 Interrupt Mask on line 29 */ +#define EXTI_C2IMR1_IM30_Pos (30U) +#define EXTI_C2IMR1_IM30_Msk (0x1UL << EXTI_C2IMR1_IM30_Pos) /*!< 0x40000000 */ +#define EXTI_C2IMR1_IM30 EXTI_C2IMR1_IM30_Msk /*!< CPU2 Interrupt Mask on line 30 */ +#define EXTI_C2IMR1_IM31_Pos (31U) +#define EXTI_C2IMR1_IM31_Msk (0x1UL << EXTI_C2IMR1_IM31_Pos) /*!< 0x80000000 */ +#define EXTI_C2IMR1_IM31 EXTI_C2IMR1_IM31_Msk /*!< CPU2 Interrupt Mask on line 31 */ + +/******************** Bits definition for EXTI_C2EMR1 register **************/ +#define EXTI_C2EMR1_Pos (0U) +#define EXTI_C2EMR1_Msk (0x003EFFFFUL << EXTI_C2EMR1_Pos) /*!< 0xFFFFFFFF */ +#define EXTI_C2EMR1_EM EXTI_C2EMR1_Msk /*!< CPU2 Event Mask */ +#define EXTI_C2EMR1_EM0_Pos (0U) +#define EXTI_C2EMR1_EM0_Msk (0x1UL << EXTI_C2EMR1_EM0_Pos) /*!< 0x00000001 */ +#define EXTI_C2EMR1_EM0 EXTI_C2EMR1_EM0_Msk /*!< CPU2 Event Mask on line 0 */ +#define EXTI_C2EMR1_EM1_Pos (1U) +#define EXTI_C2EMR1_EM1_Msk (0x1UL << EXTI_C2EMR1_EM1_Pos) /*!< 0x00000002 */ +#define EXTI_C2EMR1_EM1 EXTI_C2EMR1_EM1_Msk /*!< CPU2 Event Mask on line 1 */ +#define EXTI_C2EMR1_EM2_Pos (2U) +#define EXTI_C2EMR1_EM2_Msk (0x1UL << EXTI_C2EMR1_EM2_Pos) /*!< 0x00000004 */ +#define EXTI_C2EMR1_EM2 EXTI_C2EMR1_EM2_Msk /*!< CPU2 Event Mask on line 2 */ +#define EXTI_C2EMR1_EM3_Pos (3U) +#define EXTI_C2EMR1_EM3_Msk (0x1UL << EXTI_C2EMR1_EM3_Pos) /*!< 0x00000008 */ +#define EXTI_C2EMR1_EM3 EXTI_C2EMR1_EM3_Msk /*!< CPU2 Event Mask on line 3 */ +#define EXTI_C2EMR1_EM4_Pos (4U) +#define EXTI_C2EMR1_EM4_Msk (0x1UL << EXTI_C2EMR1_EM4_Pos) /*!< 0x00000010 */ +#define EXTI_C2EMR1_EM4 EXTI_C2EMR1_EM4_Msk /*!< CPU2 Event Mask on line 4 */ +#define EXTI_C2EMR1_EM5_Pos (5U) +#define EXTI_C2EMR1_EM5_Msk (0x1UL << EXTI_C2EMR1_EM5_Pos) /*!< 0x00000020 */ +#define EXTI_C2EMR1_EM5 EXTI_C2EMR1_EM5_Msk /*!< CPU2 Event Mask on line 5 */ +#define EXTI_C2EMR1_EM6_Pos (6U) +#define EXTI_C2EMR1_EM6_Msk (0x1UL << EXTI_C2EMR1_EM6_Pos) /*!< 0x00000040 */ +#define EXTI_C2EMR1_EM6 EXTI_C2EMR1_EM6_Msk /*!< CPU2 Event Mask on line 6 */ +#define EXTI_C2EMR1_EM7_Pos (7U) +#define EXTI_C2EMR1_EM7_Msk (0x1UL << EXTI_C2EMR1_EM7_Pos) /*!< 0x00000080 */ +#define EXTI_C2EMR1_EM7 EXTI_C2EMR1_EM7_Msk /*!< CPU2 Event Mask on line 7 */ +#define EXTI_C2EMR1_EM8_Pos (8U) +#define EXTI_C2EMR1_EM8_Msk (0x1UL << EXTI_C2EMR1_EM8_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR1_EM8 EXTI_C2EMR1_EM8_Msk /*!< CPU2 Event Mask on line 8 */ +#define EXTI_C2EMR1_EM9_Pos (9U) +#define EXTI_C2EMR1_EM9_Msk (0x1UL << EXTI_C2EMR1_EM9_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR1_EM9 EXTI_C2EMR1_EM9_Msk /*!< CPU2 Event Mask on line 9 */ +#define EXTI_C2EMR1_EM10_Pos (10U) +#define EXTI_C2EMR1_EM10_Msk (0x1UL << EXTI_C2EMR1_EM10_Pos) /*!< 0x00000400 */ +#define EXTI_C2EMR1_EM10 EXTI_C2EMR1_EM10_Msk /*!< CPU2 Event Mask on line 10 */ +#define EXTI_C2EMR1_EM11_Pos (11U) +#define EXTI_C2EMR1_EM11_Msk (0x1UL << EXTI_C2EMR1_EM11_Pos) /*!< 0x00000800 */ +#define EXTI_C2EMR1_EM11 EXTI_C2EMR1_EM11_Msk /*!< CPU2 Event Mask on line 11 */ +#define EXTI_C2EMR1_EM12_Pos (12U) +#define EXTI_C2EMR1_EM12_Msk (0x1UL << EXTI_C2EMR1_EM12_Pos) /*!< 0x00001000 */ +#define EXTI_C2EMR1_EM12 EXTI_C2EMR1_EM12_Msk /*!< CPU2 Event Mask on line 12 */ +#define EXTI_C2EMR1_EM13_Pos (13U) +#define EXTI_C2EMR1_EM13_Msk (0x1UL << EXTI_C2EMR1_EM13_Pos) /*!< 0x00002000 */ +#define EXTI_C2EMR1_EM13 EXTI_C2EMR1_EM13_Msk /*!< CPU2 Event Mask on line 13 */ +#define EXTI_C2EMR1_EM14_Pos (14U) +#define EXTI_C2EMR1_EM14_Msk (0x1UL << EXTI_C2EMR1_EM14_Pos) /*!< 0x00004000 */ +#define EXTI_C2EMR1_EM14 EXTI_C2EMR1_EM14_Msk /*!< CPU2 Event Mask on line 14 */ +#define EXTI_C2EMR1_EM15_Pos (15U) +#define EXTI_C2EMR1_EM15_Msk (0x1UL << EXTI_C2EMR1_EM15_Pos) /*!< 0x00008000 */ +#define EXTI_C2EMR1_EM15 EXTI_C2EMR1_EM15_Msk /*!< CPU2 Event Mask on line 15 */ +#define EXTI_C2EMR1_EM17_Pos (17U) +#define EXTI_C2EMR1_EM17_Msk (0x1UL << EXTI_C2EMR1_EM17_Pos) /*!< 0x00020000 */ +#define EXTI_C2EMR1_EM17 EXTI_C2EMR1_EM17_Msk /*!< CPU2 Event Mask on line 17 */ +#define EXTI_C2EMR1_EM18_Pos (18U) +#define EXTI_C2EMR1_EM18_Msk (0x1UL << EXTI_C2EMR1_EM18_Pos) /*!< 0x00040000 */ +#define EXTI_C2EMR1_EM18 EXTI_C2EMR1_EM18_Msk /*!< CPU2 Event Mask on line 18 */ +#define EXTI_C2EMR1_EM19_Pos (19U) +#define EXTI_C2EMR1_EM19_Msk (0x1UL << EXTI_C2EMR1_EM19_Pos) /*!< 0x00080000 */ +#define EXTI_C2EMR1_EM19 EXTI_C2EMR1_EM19_Msk /*!< CPU2 Event Mask on line 19 */ +#define EXTI_C2EMR1_EM20_Pos (20U) +#define EXTI_C2EMR1_EM20_Msk (0x1UL << EXTI_C2EMR1_EM20_Pos) /*!< 0x00100000 */ +#define EXTI_C2EMR1_EM20 EXTI_C2EMR1_EM20_Msk /*!< CPU2 Event Mask on line 20 */ + +/******************** Bits definition for EXTI_C2IMR2 register **************/ +#define EXTI_C2IMR2_Pos (0U) +#define EXTI_C2IMR2_Msk (0x0001FFFFUL << EXTI_C2IMR2_Pos) /*!< 0x0001FFFF */ +#define EXTI_C2IMR2_IM EXTI_C2IMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2IMR2_IM33_Pos (1U) +#define EXTI_C2IMR2_IM33_Msk (0x1UL << EXTI_C2IMR2_IM33_Pos) /*!< 0x00000002 */ +#define EXTI_C2IMR2_IM33 EXTI_C2IMR2_IM33_Msk /*!< CPU2 Interrupt Mask on line 33 */ +#define EXTI_C2IMR2_IM36_Pos (4U) +#define EXTI_C2IMR2_IM36_Msk (0x1UL << EXTI_C2IMR2_IM36_Pos) /*!< 0x00000010 */ +#define EXTI_C2IMR2_IM36 EXTI_C2IMR2_IM36_Msk /*!< CPU2 Interrupt Mask on line 36 */ +#define EXTI_C2IMR2_IM37_Pos (5U) +#define EXTI_C2IMR2_IM37_Msk (0x1UL << EXTI_C2IMR2_IM37_Pos) /*!< 0x00000020 */ +#define EXTI_C2IMR2_IM37 EXTI_C2IMR2_IM37_Msk /*!< CPU2 Interrupt Mask on line 37 */ +#define EXTI_C2IMR2_IM38_Pos (6U) +#define EXTI_C2IMR2_IM38_Msk (0x1UL << EXTI_C2IMR2_IM38_Pos) /*!< 0x00000040 */ +#define EXTI_C2IMR2_IM38 EXTI_C2IMR2_IM38_Msk /*!< CPU2 Interrupt Mask on line 38 */ +#define EXTI_C2IMR2_IM39_Pos (7U) +#define EXTI_C2IMR2_IM39_Msk (0x1UL << EXTI_C2IMR2_IM39_Pos) /*!< 0x00000080 */ +#define EXTI_C2IMR2_IM39 EXTI_C2IMR2_IM39_Msk /*!< CPU2 Interrupt Mask on line 39 */ +#define EXTI_C2IMR2_IM40_Pos (8U) +#define EXTI_C2IMR2_IM40_Msk (0x1UL << EXTI_C2IMR2_IM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2IMR2_IM40 EXTI_C2IMR2_IM40_Msk /*!< CPU2 Interrupt Mask on line 40 */ +#define EXTI_C2IMR2_IM41_Pos (9U) +#define EXTI_C2IMR2_IM41_Msk (0x1UL << EXTI_C2IMR2_IM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2IMR2_IM41 EXTI_C2IMR2_IM41_Msk /*!< CPU2 Interrupt Mask on line 41 */ +#define EXTI_C2IMR2_IM42_Pos (10U) +#define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ +#define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ +#define EXTI_C2IMR2_IM44_Pos (12U) +#define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ +#define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ +#define EXTI_C2IMR2_IM45_Pos (13U) +#define EXTI_C2IMR2_IM45_Msk (0x1UL << EXTI_C2IMR2_IM45_Pos) /*!< 0x00002000 */ +#define EXTI_C2IMR2_IM45 EXTI_C2IMR2_IM45_Msk /*!< CPU2 Interrupt Mask on line 45 */ +#define EXTI_C2IMR2_IM48_Pos (16U) +#define EXTI_C2IMR2_IM48_Msk (0x1UL << EXTI_C2IMR2_IM48_Pos) /*!< 0x00010000 */ +#define EXTI_C2IMR2_IM48 EXTI_C2IMR2_IM48_Msk /*!< CPU2 Interrupt Mask on line 48 */ + +/******************** Bits definition for EXTI_C2EMR2 register **************/ +#define EXTI_C2EMR2_Pos (8U) +#define EXTI_C2EMR2_Msk (0x00000300UL << EXTI_C2EMR2_Pos) /*!< 0x000003000 */ +#define EXTI_C2EMR2_EM EXTI_C2EMR2_Msk /*!< CPU2 Interrupt Mask */ +#define EXTI_C2EMR2_EM40_Pos (8U) +#define EXTI_C2EMR2_EM40_Msk (0x1UL << EXTI_C2EMR2_EM40_Pos) /*!< 0x00000100 */ +#define EXTI_C2EMR2_EM40 EXTI_C2EMR2_EM40_Msk /*!< CPU2 Event Mask on line 40 */ +#define EXTI_C2EMR2_EM41_Pos (9U) +#define EXTI_C2EMR2_EM41_Msk (0x1UL << EXTI_C2EMR2_EM41_Pos) /*!< 0x00000200 */ +#define EXTI_C2EMR2_EM41 EXTI_C2EMR2_EM41_Msk /*!< CPU2 Event Mask on line 41 */ + +/******************************************************************************/ +/* */ +/* Public Key Accelerator (PKA) */ +/* */ +/******************************************************************************/ + +/******************* Bits definition for PKA_CR register **************/ +#define PKA_CR_EN_Pos (0U) +#define PKA_CR_EN_Msk (0x1UL << PKA_CR_EN_Pos) /*!< 0x00000001 */ +#define PKA_CR_EN PKA_CR_EN_Msk /*!< PKA enable */ +#define PKA_CR_START_Pos (1U) +#define PKA_CR_START_Msk (0x1UL << PKA_CR_START_Pos) /*!< 0x00000002 */ +#define PKA_CR_START PKA_CR_START_Msk /*!< Start operation */ +#define PKA_CR_MODE_Pos (8U) +#define PKA_CR_MODE_Msk (0x3FUL << PKA_CR_MODE_Pos) /*!< 0x00003F00 */ +#define PKA_CR_MODE PKA_CR_MODE_Msk /*!< MODE[5:0] PKA operation code */ +#define PKA_CR_MODE_0 (0x01U << PKA_CR_MODE_Pos) /*!< 0x00000100 */ +#define PKA_CR_MODE_1 (0x02U << PKA_CR_MODE_Pos) /*!< 0x00000200 */ +#define PKA_CR_MODE_2 (0x04U << PKA_CR_MODE_Pos) /*!< 0x00000400 */ +#define PKA_CR_MODE_3 (0x08U << PKA_CR_MODE_Pos) /*!< 0x00000800 */ +#define PKA_CR_MODE_4 (0x10U << PKA_CR_MODE_Pos) /*!< 0x00001000 */ +#define PKA_CR_MODE_5 (0x20U << PKA_CR_MODE_Pos) /*!< 0x00002000 */ +#define PKA_CR_PROCENDIE_Pos (17U) +#define PKA_CR_PROCENDIE_Msk (0x1UL << PKA_CR_PROCENDIE_Pos) /*!< 0x00020000 */ +#define PKA_CR_PROCENDIE PKA_CR_PROCENDIE_Msk /*!< End of operation interrupt enable */ +#define PKA_CR_RAMERRIE_Pos (19U) +#define PKA_CR_RAMERRIE_Msk (0x1UL << PKA_CR_RAMERRIE_Pos) /*!< 0x00080000 */ +#define PKA_CR_RAMERRIE PKA_CR_RAMERRIE_Msk /*!< RAM error interrupt enable */ +#define PKA_CR_ADDRERRIE_Pos (20U) +#define PKA_CR_ADDRERRIE_Msk (0x1UL << PKA_CR_ADDRERRIE_Pos) /*!< 0x00100000 */ +#define PKA_CR_ADDRERRIE PKA_CR_ADDRERRIE_Msk /*!< RAM error interrupt enable */ + +/******************* Bits definition for PKA_SR register **************/ +#define PKA_SR_BUSY_Pos (16U) +#define PKA_SR_BUSY_Msk (0x1UL << PKA_SR_BUSY_Pos) /*!< 0x00010000 */ +#define PKA_SR_BUSY PKA_SR_BUSY_Msk /*!< PKA operation is in progress */ +#define PKA_SR_PROCENDF_Pos (17U) +#define PKA_SR_PROCENDF_Msk (0x1UL << PKA_SR_PROCENDF_Pos) /*!< 0x00020000 */ +#define PKA_SR_PROCENDF PKA_SR_PROCENDF_Msk /*!< PKA end of operation flag */ +#define PKA_SR_RAMERRF_Pos (19U) +#define PKA_SR_RAMERRF_Msk (0x1UL << PKA_SR_RAMERRF_Pos) /*!< 0x00080000 */ +#define PKA_SR_RAMERRF PKA_SR_RAMERRF_Msk /*!< PKA RAM error flag */ +#define PKA_SR_ADDRERRF_Pos (20U) +#define PKA_SR_ADDRERRF_Msk (0x1UL << PKA_SR_ADDRERRF_Pos) /*!< 0x00100000 */ +#define PKA_SR_ADDRERRF PKA_SR_ADDRERRF_Msk /*!< Address error flag */ + +/******************* Bits definition for PKA_CLRFR register **************/ +#define PKA_CLRFR_PROCENDFC_Pos (17U) +#define PKA_CLRFR_PROCENDFC_Msk (0x1UL << PKA_CLRFR_PROCENDFC_Pos) /*!< 0x00020000 */ +#define PKA_CLRFR_PROCENDFC PKA_CLRFR_PROCENDFC_Msk /*!< Clear PKA end of operation flag */ +#define PKA_CLRFR_RAMERRFC_Pos (19U) +#define PKA_CLRFR_RAMERRFC_Msk (0x1UL << PKA_CLRFR_RAMERRFC_Pos) /*!< 0x00080000 */ +#define PKA_CLRFR_RAMERRFC PKA_CLRFR_RAMERRFC_Msk /*!< Clear PKA RAM error flag */ +#define PKA_CLRFR_ADDRERRFC_Pos (20U) +#define PKA_CLRFR_ADDRERRFC_Msk (0x1UL << PKA_CLRFR_ADDRERRFC_Pos) /*!< 0x00100000 */ +#define PKA_CLRFR_ADDRERRFC PKA_CLRFR_ADDRERRFC_Msk /*!< Clear address error flag */ + +/******************* Bits definition for PKA RAM *************************/ +#define PKA_RAM_OFFSET 0x400U /*!< PKA RAM address offset */ + +/* Compute Montgomery parameter input data */ +#define PKA_MONTGOMERY_PARAM_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_MONTGOMERY_PARAM_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute Montgomery parameter output data */ +#define PKA_MONTGOMERY_PARAM_OUT_PARAMETER ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output Montgomery parameter */ + +/* Compute modular exponentiation input data */ +#define PKA_MODULAR_EXP_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_MODULAR_EXP_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_EXP_IN_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_IN_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ +#define PKA_MODULAR_EXP_IN_EXPONENT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input exponent to process */ +#define PKA_MODULAR_EXP_IN_MODULUS ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Compute modular exponentiation output data */ +#define PKA_MODULAR_EXP_OUT_MONTGOMERY_PARAM ((0x594U - PKA_RAM_OFFSET)>>2) /*!< Output storage area for Montgomery parameter */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC1 ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 1 */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC2 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 2 */ +#define PKA_MODULAR_EXP_OUT_EXPONENT_BASE ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Output base of the exponentiation */ +#define PKA_MODULAR_EXP_OUT_SM_ALGO_ACC3 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output SM algorithm accumulator 3 */ + +/* Compute ECC scalar multiplication input data */ +#define PKA_ECC_SCALAR_MUL_IN_EXP_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input exponent number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_OP_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECC_SCALAR_MUL_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECC_SCALAR_MUL_IN_MONTGOMERY_PARAM ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input storage area for Montgomery parameter */ +#define PKA_ECC_SCALAR_MUL_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input 'k' of KP */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECC_SCALAR_MUL_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Compute ECC scalar multiplication output data */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Output result X coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_RESULT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result Y coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_X1 ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Output last double X1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Y1 ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Output last double Y1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_LAST_DOUBLE_Z1 ((0xE90U - PKA_RAM_OFFSET)>>2) /*!< Output last double Z1 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_X2 ((0xEE4U - PKA_RAM_OFFSET)>>2) /*!< Output check point X2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Y2 ((0xF38U - PKA_RAM_OFFSET)>>2) /*!< Output check point Y2 coordinate */ +#define PKA_ECC_SCALAR_MUL_OUT_CHECK_POINT_Z2 ((0xF8CU - PKA_RAM_OFFSET)>>2) /*!< Output check point Z2 coordinate */ + +/* Point check input data */ +#define PKA_POINT_CHECK_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_POINT_CHECK_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_POINT_CHECK_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_POINT_CHECK_IN_B_COEFF ((0x7FCU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'b' coefficient */ +#define PKA_POINT_CHECK_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_POINT_CHECK_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ + +/* Point check output data */ +#define PKA_POINT_CHECK_OUT_ERROR ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Output error */ + +/* ECDSA signature input data */ +#define PKA_ECDSA_SIGN_IN_ORDER_NB_BITS ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_SIGN_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_SIGN_IN_A_COEFF_SIGN ((0x408U - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_A_COEFF ((0x40CU - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_SIGN_IN_MOD_GF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_SIGN_IN_K ((0x508U - PKA_RAM_OFFSET)>>2) /*!< Input k value of the ECDSA */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_X ((0x55CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_SIGN_IN_INITIAL_POINT_Y ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_SIGN_IN_HASH_E ((0xDE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_SIGN_IN_PRIVATE_KEY_D ((0xE3CU - PKA_RAM_OFFSET)>>2) /*!< Input d, private key */ +#define PKA_ECDSA_SIGN_IN_ORDER_N ((0xE94U - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA signature output data */ +#define PKA_ECDSA_SIGN_OUT_ERROR ((0xEE8U - PKA_RAM_OFFSET)>>2) /*!< Output error */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_R ((0x700U - PKA_RAM_OFFSET)>>2) /*!< Output signature r */ +#define PKA_ECDSA_SIGN_OUT_SIGNATURE_S ((0x754U - PKA_RAM_OFFSET)>>2) /*!< Output signature s */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_X ((0x103CU - PKA_RAM_OFFSET)>>2) /*!< Output final point kP X coordinate */ +#define PKA_ECDSA_SIGN_OUT_FINAL_POINT_Y ((0x1090U - PKA_RAM_OFFSET)>>2) /*!< Output final point kP Y coordinate */ + +/* ECDSA verification input data */ +#define PKA_ECDSA_VERIF_IN_ORDER_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input order number of bits */ +#define PKA_ECDSA_VERIF_IN_MOD_NB_BITS ((0x4B4U - PKA_RAM_OFFSET)>>2) /*!< Input modulus number of bits */ +#define PKA_ECDSA_VERIF_IN_A_COEFF_SIGN ((0x45CU - PKA_RAM_OFFSET)>>2) /*!< Input sign of the 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_A_COEFF ((0x460U - PKA_RAM_OFFSET)>>2) /*!< Input ECC curve 'a' coefficient */ +#define PKA_ECDSA_VERIF_IN_MOD_GF ((0x4B8U - PKA_RAM_OFFSET)>>2) /*!< Input modulus GF(p) */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_X ((0x5E8U - PKA_RAM_OFFSET)>>2) /*!< Input initial point P X coordinate */ +#define PKA_ECDSA_VERIF_IN_INITIAL_POINT_Y ((0x63CU - PKA_RAM_OFFSET)>>2) /*!< Input initial point P Y coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_X ((0xF40U - PKA_RAM_OFFSET)>>2) /*!< Input public key point X coordinate */ +#define PKA_ECDSA_VERIF_IN_PUBLIC_KEY_POINT_Y ((0xF94U - PKA_RAM_OFFSET)>>2) /*!< Input public key point Y coordinate */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_R ((0x1098U - PKA_RAM_OFFSET)>>2) /*!< Input r, part of the signature */ +#define PKA_ECDSA_VERIF_IN_SIGNATURE_S ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input s, part of the signature */ +#define PKA_ECDSA_VERIF_IN_HASH_E ((0xFE8U - PKA_RAM_OFFSET)>>2) /*!< Input e, hash of the message */ +#define PKA_ECDSA_VERIF_IN_ORDER_N ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input n, order of the curve */ + +/* ECDSA verification output data */ +#define PKA_ECDSA_VERIF_OUT_RESULT ((0x5B0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* RSA CRT exponentiation input data */ +#define PKA_RSA_CRT_EXP_IN_MOD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operands number of bits */ +#define PKA_RSA_CRT_EXP_IN_DP_CRT ((0x65CU - PKA_RAM_OFFSET)>>2) /*!< Input Dp CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_DQ_CRT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Input Dq CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_QINV_CRT ((0x7ECU - PKA_RAM_OFFSET)>>2) /*!< Input qInv CRT parameter */ +#define PKA_RSA_CRT_EXP_IN_PRIME_P ((0x97CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime p */ +#define PKA_RSA_CRT_EXP_IN_PRIME_Q ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input Prime q */ +#define PKA_RSA_CRT_EXP_IN_EXPONENT_BASE ((0xEECU - PKA_RAM_OFFSET)>>2) /*!< Input base of the exponentiation */ + +/* RSA CRT exponentiation output data */ +#define PKA_RSA_CRT_EXP_OUT_RESULT ((0x724U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular reduction input data */ +#define PKA_MODULAR_REDUC_IN_OP_LENGTH ((0x400U - PKA_RAM_OFFSET)>>2) /*!< Input operand length */ +#define PKA_MODULAR_REDUC_IN_OPERAND ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand */ +#define PKA_MODULAR_REDUC_IN_MOD_LENGTH ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input modulus length */ +#define PKA_MODULAR_REDUC_IN_MODULUS ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Modular reduction output data */ +#define PKA_MODULAR_REDUC_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic addition input data */ +#define PKA_ARITHMETIC_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic addition output data */ +#define PKA_ARITHMETIC_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic substraction input data */ +#define PKA_ARITHMETIC_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic substraction output data */ +#define PKA_ARITHMETIC_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Arithmetic multiplication input data */ +#define PKA_ARITHMETIC_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Arithmetic multiplication output data */ +#define PKA_ARITHMETIC_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Comparison input data */ +#define PKA_COMPARISON_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_COMPARISON_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_COMPARISON_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Comparison output data */ +#define PKA_COMPARISON_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular addition input data */ +#define PKA_MODULAR_ADD_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_ADD_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_ADD_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_ADD_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 (modulus) */ + +/* Modular addition output data */ +#define PKA_MODULAR_ADD_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular inversion input data */ +#define PKA_MODULAR_INV_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_INV_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_INV_IN_OP2_MOD ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 (modulus) */ + +/* Modular inversion output data */ +#define PKA_MODULAR_INV_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Modular substraction input data */ +#define PKA_MODULAR_SUB_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MODULAR_SUB_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MODULAR_SUB_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MODULAR_SUB_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op3 */ + +/* Modular substraction output data */ +#define PKA_MODULAR_SUB_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Montgomery multiplication input data */ +#define PKA_MONTGOMERY_MUL_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_MONTGOMERY_MUL_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_MONTGOMERY_MUL_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_MONTGOMERY_MUL_IN_OP3_MOD ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input modulus */ + +/* Montgomery multiplication output data */ +#define PKA_MONTGOMERY_MUL_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/* Generic Arithmetic input data */ +#define PKA_ARITHMETIC_ALL_OPS_NB_BITS ((0x404U - PKA_RAM_OFFSET)>>2) /*!< Input operand number of bits */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP1 ((0x8B4U - PKA_RAM_OFFSET)>>2) /*!< Input operand op1 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP2 ((0xA44U - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ +#define PKA_ARITHMETIC_ALL_OPS_IN_OP3 ((0xD5CU - PKA_RAM_OFFSET)>>2) /*!< Input operand op2 */ + +/* Generic Arithmetic output data */ +#define PKA_ARITHMETIC_ALL_OPS_OUT_RESULT ((0xBD0U - PKA_RAM_OFFSET)>>2) /*!< Output result */ + +/******************************************************************************/ +/* */ +/* FLASH */ +/* */ +/******************************************************************************/ +/******************* Bits definition for FLASH_ACR register *****************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0x7UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Latency */ +#define FLASH_ACR_LATENCY_0 (0x1UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ +#define FLASH_ACR_LATENCY_1 (0x2UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ +#define FLASH_ACR_LATENCY_2 (0x4UL << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ +#define FLASH_ACR_PRFTEN_Pos (8U) +#define FLASH_ACR_PRFTEN_Msk (0x1UL << FLASH_ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_ACR_PRFTEN FLASH_ACR_PRFTEN_Msk /*!< Prefetch enable */ +#define FLASH_ACR_ICEN_Pos (9U) +#define FLASH_ACR_ICEN_Msk (0x1UL << FLASH_ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_ACR_ICEN FLASH_ACR_ICEN_Msk /*!< Instruction cache enable */ +#define FLASH_ACR_DCEN_Pos (10U) +#define FLASH_ACR_DCEN_Msk (0x1UL << FLASH_ACR_DCEN_Pos) /*!< 0x00000400 */ +#define FLASH_ACR_DCEN FLASH_ACR_DCEN_Msk /*!< Data cache enable */ +#define FLASH_ACR_ICRST_Pos (11U) +#define FLASH_ACR_ICRST_Msk (0x1UL << FLASH_ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_ACR_ICRST FLASH_ACR_ICRST_Msk /*!< Instruction cache reset */ +#define FLASH_ACR_DCRST_Pos (12U) +#define FLASH_ACR_DCRST_Msk (0x1UL << FLASH_ACR_DCRST_Pos) /*!< 0x00001000 */ +#define FLASH_ACR_DCRST FLASH_ACR_DCRST_Msk /*!< Data cache reset */ +#define FLASH_ACR_PES_Pos (15U) +#define FLASH_ACR_PES_Msk (0x1UL << FLASH_ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_ACR_PES FLASH_ACR_PES_Msk /*!< Program/erase suspend request */ +#define FLASH_ACR_EMPTY_Pos (16U) +#define FLASH_ACR_EMPTY_Msk (0x1UL << FLASH_ACR_EMPTY_Pos) /*!< 0x00010000 */ +#define FLASH_ACR_EMPTY FLASH_ACR_EMPTY_Msk /*!< Flash use area empty */ + +#define FLASH_ACR_LATENCY_0WS (0x0UL << FLASH_ACR_LATENCY_Pos) /*!< FLASH Zero wait state */ +#define FLASH_ACR_LATENCY_1WS (FLASH_ACR_LATENCY_0 << FLASH_ACR_LATENCY_Pos) /*!< FLASH One wait state */ +#define FLASH_ACR_LATENCY_2WS (FLASH_ACR_LATENCY_1 << FLASH_ACR_LATENCY_Pos) /*!< FLASH Two wait states */ +#define FLASH_ACR_LATENCY_3WS ((FLASH_ACR_LATENCY_1 | FLASH_ACR_LATENCY_0) << FLASH_ACR_LATENCY_Pos) /*!< FLASH Three wait states */ + +/******************* Bits definition for FLASH_SR register ******************/ +#define FLASH_SR_EOP_Pos (0U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of Operation */ +#define FLASH_SR_OPERR_Pos (1U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Operation error */ +#define FLASH_SR_PROGERR_Pos (3U) +#define FLASH_SR_PROGERR_Msk (0x1UL << FLASH_SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_SR_PROGERR FLASH_SR_PROGERR_Msk /*!< Programming error */ +#define FLASH_SR_WRPERR_Pos (4U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error */ +#define FLASH_SR_PGAERR_Pos (5U) +#define FLASH_SR_PGAERR_Msk (0x1UL << FLASH_SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_SR_PGAERR FLASH_SR_PGAERR_Msk /*!< Programming alignment error */ +#define FLASH_SR_SIZERR_Pos (6U) +#define FLASH_SR_SIZERR_Msk (0x1UL << FLASH_SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_SR_SIZERR FLASH_SR_SIZERR_Msk /*!< Size error */ +#define FLASH_SR_PGSERR_Pos (7U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error */ +#define FLASH_SR_MISERR_Pos (8U) +#define FLASH_SR_MISERR_Msk (0x1UL << FLASH_SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_SR_MISERR FLASH_SR_MISERR_Msk /*!< Fast programming data miss error */ +#define FLASH_SR_FASTERR_Pos (9U) +#define FLASH_SR_FASTERR_Msk (0x1UL << FLASH_SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_SR_FASTERR FLASH_SR_FASTERR_Msk /*!< Fast programming error */ +#define FLASH_SR_OPTNV_Pos (13U) +#define FLASH_SR_OPTNV_Msk (0x1UL << FLASH_SR_OPTNV_Pos) /*!< 0x00002000 */ +#define FLASH_SR_OPTNV FLASH_SR_OPTNV_Msk /*!< User option OPTVAL indication */ +#define FLASH_SR_RDERR_Pos (14U) +#define FLASH_SR_RDERR_Msk (0x1UL << FLASH_SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_SR_RDERR FLASH_SR_RDERR_Msk /*!< PCROP read error */ +#define FLASH_SR_OPTVERR_Pos (15U) +#define FLASH_SR_OPTVERR_Msk (0x1UL << FLASH_SR_OPTVERR_Pos) /*!< 0x00008000 */ +#define FLASH_SR_OPTVERR FLASH_SR_OPTVERR_Msk /*!< Option validity error */ +#define FLASH_SR_BSY_Pos (16U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Flash Busy */ +#define FLASH_SR_CFGBSY_Pos (18U) +#define FLASH_SR_CFGBSY_Msk (0x1UL << FLASH_SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_SR_CFGBSY FLASH_SR_CFGBSY_Msk /*!< Programming or erase configuration busy */ +#define FLASH_SR_PESD_Pos (19U) +#define FLASH_SR_PESD_Msk (0x1UL << FLASH_SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_SR_PESD FLASH_SR_PESD_Msk /*!< Programming/erase operation suspended */ + +/******************* Bits definition for FLASH_CR register ******************/ +#define FLASH_CR_PG_Pos (0U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Flash programming */ +#define FLASH_CR_PER_Pos (1U) +#define FLASH_CR_PER_Msk (0x1UL << FLASH_CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page erase */ +#define FLASH_CR_MER_Pos (2U) +#define FLASH_CR_MER_Msk (0x1UL << FLASH_CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass erase */ +#define FLASH_CR_PNB_Pos (3U) +#define FLASH_CR_PNB_Msk (0xFFUL << FLASH_CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_CR_PNB FLASH_CR_PNB_Msk /*!< Page number selection mask */ +#define FLASH_CR_STRT_Pos (16U) +#define FLASH_CR_STRT_Msk (0x1UL << FLASH_CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start an erase operation */ +#define FLASH_CR_OPTSTRT_Pos (17U) +#define FLASH_CR_OPTSTRT_Msk (0x1UL << FLASH_CR_OPTSTRT_Pos) /*!< 0x00020000 */ +#define FLASH_CR_OPTSTRT FLASH_CR_OPTSTRT_Msk /*!< Options modification start */ +#define FLASH_CR_FSTPG_Pos (18U) +#define FLASH_CR_FSTPG_Msk (0x1UL << FLASH_CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_CR_FSTPG FLASH_CR_FSTPG_Msk /*!< Fast programming */ +#define FLASH_CR_EOPIE_Pos (24U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ +#define FLASH_CR_ERRIE_Pos (25U) +#define FLASH_CR_ERRIE_Msk (0x1UL << FLASH_CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error interrupt enable */ +#define FLASH_CR_RDERRIE_Pos (26U) +#define FLASH_CR_RDERRIE_Msk (0x1UL << FLASH_CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_RDERRIE FLASH_CR_RDERRIE_Msk /*!< PCROP read error interrupt enable */ +#define FLASH_CR_OBL_LAUNCH_Pos (27U) +#define FLASH_CR_OBL_LAUNCH_Msk (0x1UL << FLASH_CR_OBL_LAUNCH_Pos) /*!< 0x08000000 */ +#define FLASH_CR_OBL_LAUNCH FLASH_CR_OBL_LAUNCH_Msk /*!< Force the option byte loading */ +#define FLASH_CR_OPTLOCK_Pos (30U) +#define FLASH_CR_OPTLOCK_Msk (0x1UL << FLASH_CR_OPTLOCK_Pos) /*!< 0x40000000 */ +#define FLASH_CR_OPTLOCK FLASH_CR_OPTLOCK_Msk /*!< Options lock */ +#define FLASH_CR_LOCK_Pos (31U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x80000000 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Flash control register lock */ + +/******************* Bits definition for FLASH_ECCR register ****************/ +#define FLASH_ECCR_ADDR_ECC_Pos (0U) +#define FLASH_ECCR_ADDR_ECC_Msk (0x1FFFFUL << FLASH_ECCR_ADDR_ECC_Pos) /*!< 0x0001FFFF */ +#define FLASH_ECCR_ADDR_ECC FLASH_ECCR_ADDR_ECC_Msk /*!< double-word address ECC fail */ +#define FLASH_ECCR_SYSF_ECC_Pos (20U) +#define FLASH_ECCR_SYSF_ECC_Msk (0x1UL << FLASH_ECCR_SYSF_ECC_Pos) /*!< 0x00100000 */ +#define FLASH_ECCR_SYSF_ECC FLASH_ECCR_SYSF_ECC_Msk /*!< System flash ECC fail */ +#define FLASH_ECCR_ECCCIE_Pos (24U) +#define FLASH_ECCR_ECCCIE_Msk (0x1UL << FLASH_ECCR_ECCCIE_Pos) /*!< 0x01000000 */ +#define FLASH_ECCR_ECCCIE FLASH_ECCR_ECCCIE_Msk /*!< ECC correction interrupt enable */ +#define FLASH_ECCR_CPUID_Pos (26U) +#define FLASH_ECCR_CPUID_Msk (0x7UL << FLASH_ECCR_CPUID_Pos) /*!< 0x1C000000 */ +#define FLASH_ECCR_CPUID FLASH_ECCR_CPUID_Msk /*!< CPU identification */ +#define FLASH_ECCR_ECCC_Pos (30U) +#define FLASH_ECCR_ECCC_Msk (0x1UL << FLASH_ECCR_ECCC_Pos) /*!< 0x40000000 */ +#define FLASH_ECCR_ECCC FLASH_ECCR_ECCC_Msk /*!< ECC correction */ +#define FLASH_ECCR_ECCD_Pos (31U) +#define FLASH_ECCR_ECCD_Msk (0x1UL << FLASH_ECCR_ECCD_Pos) /*!< 0x80000000 */ +#define FLASH_ECCR_ECCD FLASH_ECCR_ECCD_Msk /*!< ECC detection */ + +/******************* Bits definition for FLASH_OPTR register ****************/ +#define FLASH_OPTR_RDP_Pos (0U) +#define FLASH_OPTR_RDP_Msk (0xFFUL << FLASH_OPTR_RDP_Pos) /*!< 0x000000FF */ +#define FLASH_OPTR_RDP FLASH_OPTR_RDP_Msk /*!< Read protection level */ +#define FLASH_OPTR_ESE_Pos (8U) +#define FLASH_OPTR_ESE_Msk (0x1UL << FLASH_OPTR_ESE_Pos) /*!< 0x00000100 */ +#define FLASH_OPTR_ESE FLASH_OPTR_ESE_Msk /*!< Security enable */ +#define FLASH_OPTR_BOR_LEV_Pos (9U) +#define FLASH_OPTR_BOR_LEV_Msk (0x7UL << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000E00 */ +#define FLASH_OPTR_BOR_LEV FLASH_OPTR_BOR_LEV_Msk /*!< BOR reset level mask */ +#define FLASH_OPTR_BOR_LEV_0 (0x1U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000200 */ +#define FLASH_OPTR_BOR_LEV_1 (0x2U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000400 */ +#define FLASH_OPTR_BOR_LEV_2 (0x4U << FLASH_OPTR_BOR_LEV_Pos) /*!< 0x00000800 */ +#define FLASH_OPTR_nRST_STOP_Pos (12U) +#define FLASH_OPTR_nRST_STOP_Msk (0x1UL << FLASH_OPTR_nRST_STOP_Pos) /*!< 0x00001000 */ +#define FLASH_OPTR_nRST_STOP FLASH_OPTR_nRST_STOP_Msk /*!< Reset option in Stop mode */ +#define FLASH_OPTR_nRST_STDBY_Pos (13U) +#define FLASH_OPTR_nRST_STDBY_Msk (0x1UL << FLASH_OPTR_nRST_STDBY_Pos) /*!< 0x00002000 */ +#define FLASH_OPTR_nRST_STDBY FLASH_OPTR_nRST_STDBY_Msk /*!< Reset option in Standby mode */ +#define FLASH_OPTR_nRST_SHDW_Pos (14U) +#define FLASH_OPTR_nRST_SHDW_Msk (0x1UL << FLASH_OPTR_nRST_SHDW_Pos) /*!< 0x00004000 */ +#define FLASH_OPTR_nRST_SHDW FLASH_OPTR_nRST_SHDW_Msk /*!< Reset option in Shutdown mode */ +#define FLASH_OPTR_IRHEN_Pos (15U) +#define FLASH_OPTR_IRHEN_Msk (0x1UL << FLASH_OPTR_IRHEN_Pos) /*!< 0x00008000 */ +#define FLASH_OPTR_IRHEN FLASH_OPTR_IRHEN_Msk /*!< Internal reset holder enable bit */ +#define FLASH_OPTR_IWDG_SW_Pos (16U) +#define FLASH_OPTR_IWDG_SW_Msk (0x1UL << FLASH_OPTR_IWDG_SW_Pos) /*!< 0x00010000 */ +#define FLASH_OPTR_IWDG_SW FLASH_OPTR_IWDG_SW_Msk /*!< Independent watchdog selection */ +#define FLASH_OPTR_IWDG_STOP_Pos (17U) +#define FLASH_OPTR_IWDG_STOP_Msk (0x1UL << FLASH_OPTR_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTR_IWDG_STOP FLASH_OPTR_IWDG_STOP_Msk /*!< Independent watchdog counter option in Stop mode */ +#define FLASH_OPTR_IWDG_STDBY_Pos (18U) +#define FLASH_OPTR_IWDG_STDBY_Msk (0x1UL << FLASH_OPTR_IWDG_STDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTR_IWDG_STDBY FLASH_OPTR_IWDG_STDBY_Msk /*!< Independent watchdog counter option in Standby mode */ +#define FLASH_OPTR_WWDG_SW_Pos (19U) +#define FLASH_OPTR_WWDG_SW_Msk (0x1UL << FLASH_OPTR_WWDG_SW_Pos) /*!< 0x00080000 */ +#define FLASH_OPTR_WWDG_SW FLASH_OPTR_WWDG_SW_Msk /*!< Window watchdog selection */ +#define FLASH_OPTR_nRST_MODE_1_Pos (22U) +#define FLASH_OPTR_nRST_MODE_1_Msk (0x1UL << FLASH_OPTR_nRST_MODE_1_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nRST_MODE_1 FLASH_OPTR_nRST_MODE_1_Msk /*!< PB11 GPIO normal mode */ +#define FLASH_OPTR_nBOOT1_Pos (23U) +#define FLASH_OPTR_nBOOT1_Msk (0x1UL << FLASH_OPTR_nBOOT1_Pos) /*!< 0x00800000 */ +#define FLASH_OPTR_nBOOT1 FLASH_OPTR_nBOOT1_Msk /*!< Boot Configuration */ +#define FLASH_OPTR_SRAM2PE_Pos (24U) +#define FLASH_OPTR_SRAM2PE_Msk (0x1UL << FLASH_OPTR_SRAM2PE_Pos) /*!< 0x01000000 */ +#define FLASH_OPTR_SRAM2PE FLASH_OPTR_SRAM2PE_Msk /*!< SRAM2 parity check enable */ +#define FLASH_OPTR_SRAM2RST_Pos (25U) +#define FLASH_OPTR_SRAM2RST_Msk (0x1UL << FLASH_OPTR_SRAM2RST_Pos) /*!< 0x02000000 */ +#define FLASH_OPTR_SRAM2RST FLASH_OPTR_SRAM2RST_Msk /*!< SRAM2 erase option when system reset */ +#define FLASH_OPTR_nSWBOOT0_Pos (26U) +#define FLASH_OPTR_nSWBOOT0_Msk (0x1UL << FLASH_OPTR_nSWBOOT0_Pos) /*!< 0x04000000 */ +#define FLASH_OPTR_nSWBOOT0 FLASH_OPTR_nSWBOOT0_Msk /*!< Software BOOT0 */ +#define FLASH_OPTR_nBOOT0_Pos (27U) +#define FLASH_OPTR_nBOOT0_Msk (0x1UL << FLASH_OPTR_nBOOT0_Pos) /*!< 0x08000000 */ +#define FLASH_OPTR_nBOOT0 FLASH_OPTR_nBOOT0_Msk /*!< BOOT0 option bit */ +#define FLASH_OPTR_nRST_MODE_0_Pos (28U) +#define FLASH_OPTR_nRST_MODE_0_Msk (0x1UL << FLASH_OPTR_nRST_MODE_0_Pos) /*!< 0x10000000 */ +#define FLASH_OPTR_nRST_MODE_0 FLASH_OPTR_nRST_MODE_0_Msk /*!< PB11 reset input mode */ +#define FLASH_OPTR_nRST_MODE_Pos (22U) +#define FLASH_OPTR_nRST_MODE_Msk (0x41UL << FLASH_OPTR_nRST_MODE_Pos) /*!< 0x10400000 */ +#define FLASH_OPTR_nRST_MODE FLASH_OPTR_nRST_MODE_Msk +#define FLASH_OPTR_AGC_TRIM_Pos (29U) +#define FLASH_OPTR_AGC_TRIM_Msk (0x7UL << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0xE0000000 */ +#define FLASH_OPTR_AGC_TRIM FLASH_OPTR_AGC_TRIM_Msk /*!< Automatic Gain Control trimming mask */ +#define FLASH_OPTR_AGC_TRIM_0 (0x1U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x20000000 */ +#define FLASH_OPTR_AGC_TRIM_1 (0x2U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x40000000 */ +#define FLASH_OPTR_AGC_TRIM_2 (0x4U << FLASH_OPTR_AGC_TRIM_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for FLASH_PCROP1ASR register ************/ +#define FLASH_PCROP1ASR_PCROP1A_STRT_Pos (0U) +#define FLASH_PCROP1ASR_PCROP1A_STRT_Msk (0x1FFUL << FLASH_PCROP1ASR_PCROP1A_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1ASR_PCROP1A_STRT FLASH_PCROP1ASR_PCROP1A_STRT_Msk /*!< PCROP area A start offset */ + +/****************** Bits definition for FLASH_PCROP1AER register ************/ +#define FLASH_PCROP1AER_PCROP1A_END_Pos (0U) +#define FLASH_PCROP1AER_PCROP1A_END_Msk (0x1FFUL << FLASH_PCROP1AER_PCROP1A_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1AER_PCROP1A_END FLASH_PCROP1AER_PCROP1A_END_Msk /*!< PCROP area A end offset */ +#define FLASH_PCROP1AER_PCROP_RDP_Pos (31U) +#define FLASH_PCROP1AER_PCROP_RDP_Msk (0x1UL << FLASH_PCROP1AER_PCROP_RDP_Pos) /*!< 0x80000000 */ +#define FLASH_PCROP1AER_PCROP_RDP FLASH_PCROP1AER_PCROP_RDP_Msk /*!< PCROP area preserved when RDP level decreased */ + +/****************** Bits definition for FLASH_WRP1AR register ***************/ +#define FLASH_WRP1AR_WRP1A_STRT_Pos (0U) +#define FLASH_WRP1AR_WRP1A_STRT_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1AR_WRP1A_STRT FLASH_WRP1AR_WRP1A_STRT_Msk /*!< WRP area A start offset */ +#define FLASH_WRP1AR_WRP1A_END_Pos (16U) +#define FLASH_WRP1AR_WRP1A_END_Msk (0xFFUL << FLASH_WRP1AR_WRP1A_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1AR_WRP1A_END FLASH_WRP1AR_WRP1A_END_Msk /*!< WRP area A end offset */ + +/****************** Bits definition for FLASH_WRP1BR register ***************/ +#define FLASH_WRP1BR_WRP1B_STRT_Pos (0U) +#define FLASH_WRP1BR_WRP1B_STRT_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_STRT_Pos) /*!< 0x000000FF */ +#define FLASH_WRP1BR_WRP1B_STRT FLASH_WRP1BR_WRP1B_STRT_Msk /*!< WRP area B start offset */ +#define FLASH_WRP1BR_WRP1B_END_Pos (16U) +#define FLASH_WRP1BR_WRP1B_END_Msk (0xFFUL << FLASH_WRP1BR_WRP1B_END_Pos) /*!< 0x00FF0000 */ +#define FLASH_WRP1BR_WRP1B_END FLASH_WRP1BR_WRP1B_END_Msk /*!< WRP area B end offset */ + +/****************** Bits definition for FLASH_PCROP1BSR register ************/ +#define FLASH_PCROP1BSR_PCROP1B_STRT_Pos (0U) +#define FLASH_PCROP1BSR_PCROP1B_STRT_Msk (0x1FFUL << FLASH_PCROP1BSR_PCROP1B_STRT_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BSR_PCROP1B_STRT FLASH_PCROP1BSR_PCROP1B_STRT_Msk /*!< PCROP area B start offset */ + +/****************** Bits definition for FLASH_PCROP1BER register ************/ +#define FLASH_PCROP1BER_PCROP1B_END_Pos (0U) +#define FLASH_PCROP1BER_PCROP1B_END_Msk (0x1FFUL << FLASH_PCROP1BER_PCROP1B_END_Pos) /*!< 0x000001FF */ +#define FLASH_PCROP1BER_PCROP1B_END FLASH_PCROP1BER_PCROP1B_END_Msk /*!< PCROP area B end offset */ + +/****************** Bits definition for FLASH_IPCCBR register ************/ +#define FLASH_IPCCBR_IPCCDBA_Pos (0U) +#define FLASH_IPCCBR_IPCCDBA_Msk (0x3FFFUL << FLASH_IPCCBR_IPCCDBA_Pos) /*!< 0x00003FFF */ +#define FLASH_IPCCBR_IPCCDBA FLASH_IPCCBR_IPCCDBA_Msk /*!< IPCC data buffer base address */ + +/****************** Bits definition for FLASH_SFR register ************/ +#define FLASH_SFR_SFSA_Pos (0U) +#define FLASH_SFR_SFSA_Msk (0xFFUL << FLASH_SFR_SFSA_Pos) /*!< 0x000000FF */ +#define FLASH_SFR_SFSA FLASH_SFR_SFSA_Msk /* Secure flash start address */ +#define FLASH_SFR_FSD_Pos (8U) +#define FLASH_SFR_FSD_Msk (0x1UL << FLASH_SFR_FSD_Pos) /*!< 0x00000100 */ +#define FLASH_SFR_FSD FLASH_SFR_FSD_Msk /* Flash mode secure */ +#define FLASH_SFR_DDS_Pos (12U) +#define FLASH_SFR_DDS_Msk (0x1UL << FLASH_SFR_DDS_Pos) /*!< 0x00001000 */ +#define FLASH_SFR_DDS FLASH_SFR_DDS_Msk /* Enabling and disabling CPU2 Debug access */ + +/****************** Bits definition for FLASH_SRRVR register ************/ +#define FLASH_SRRVR_SBRV_Pos (0U) +#define FLASH_SRRVR_SBRV_Msk (0x1FFFFUL << FLASH_SRRVR_SBRV_Pos) /*!< 0x0001FFFF */ +#define FLASH_SRRVR_SBRV FLASH_SRRVR_SBRV_Msk /* CPU2 boot reset vector memory offset */ + +#define FLASH_SRRVR_SBRSA_A_Pos (18U) +#define FLASH_SRRVR_SBRSA_A_Msk (0x1FUL << FLASH_SRRVR_SBRSA_A_Pos) /*!< 0x007C0000 */ +#define FLASH_SRRVR_SBRSA_A FLASH_SRRVR_SBRSA_A_Msk /* Secure backup SRAM2a start address */ +#define FLASH_SRRVR_BRSD_A_Pos (23U) +#define FLASH_SRRVR_BRSD_A_Msk (0x1UL << FLASH_SRRVR_BRSD_A_Pos) /*!< 0x00800000 */ +#define FLASH_SRRVR_BRSD_A FLASH_SRRVR_BRSD_A_Msk /* Backup SRAM2A secure mode */ + +#define FLASH_SRRVR_SBRSA_B_Pos (25U) +#define FLASH_SRRVR_SBRSA_B_Msk (0x3UL << FLASH_SRRVR_SBRSA_B_Pos) /*!< 0x06000000 */ +#define FLASH_SRRVR_SBRSA_B FLASH_SRRVR_SBRSA_B_Msk /* Secure backup SRAM2b start address */ +#define FLASH_SRRVR_BRSD_B_Pos (30U) +#define FLASH_SRRVR_BRSD_B_Msk (0x1UL << FLASH_SRRVR_BRSD_B_Pos) /*!< 0x40000000 */ +#define FLASH_SRRVR_BRSD_B FLASH_SRRVR_BRSD_B_Msk /* Backup SRAM2B secure mode */ +#define FLASH_SRRVR_C2OPT_Pos (31U) +#define FLASH_SRRVR_C2OPT_Msk (0x1UL << FLASH_SRRVR_C2OPT_Pos) /*!< 0x80000000 */ +#define FLASH_SRRVR_C2OPT FLASH_SRRVR_C2OPT_Msk /* CPU2 boot reset vector memory selection */ + +/****************** Bits definition for FLASH_C2ACR register ************/ +#define FLASH_C2ACR_PRFTEN_Pos (8U) +#define FLASH_C2ACR_PRFTEN_Msk (0x1UL << FLASH_C2ACR_PRFTEN_Pos) /*!< 0x00000100 */ +#define FLASH_C2ACR_PRFTEN FLASH_C2ACR_PRFTEN_Msk /*!< CPU2 Prefetch enable */ +#define FLASH_C2ACR_ICEN_Pos (9U) +#define FLASH_C2ACR_ICEN_Msk (0x1UL << FLASH_C2ACR_ICEN_Pos) /*!< 0x00000200 */ +#define FLASH_C2ACR_ICEN FLASH_C2ACR_ICEN_Msk /*!< CPU2 Instruction cache enable */ +#define FLASH_C2ACR_ICRST_Pos (11U) +#define FLASH_C2ACR_ICRST_Msk (0x1UL << FLASH_C2ACR_ICRST_Pos) /*!< 0x00000800 */ +#define FLASH_C2ACR_ICRST FLASH_C2ACR_ICRST_Msk /*!< CPU2 Instruction cache reset */ +#define FLASH_C2ACR_PES_Pos (15U) +#define FLASH_C2ACR_PES_Msk (0x1UL << FLASH_C2ACR_PES_Pos) /*!< 0x00008000 */ +#define FLASH_C2ACR_PES FLASH_C2ACR_PES_Msk /*!< CPU2 Program/erase suspend request */ + +/****************** Bits definition for FLASH_C2SR register ************/ +#define FLASH_C2SR_EOP_Pos (0U) +#define FLASH_C2SR_EOP_Msk (0x1UL << FLASH_C2SR_EOP_Pos) /*!< 0x00000001 */ +#define FLASH_C2SR_EOP FLASH_C2SR_EOP_Msk /*!< CPU2 End of operation */ +#define FLASH_C2SR_OPERR_Pos (1U) +#define FLASH_C2SR_OPERR_Msk (0x1UL << FLASH_C2SR_OPERR_Pos) /*!< 0x00000002 */ +#define FLASH_C2SR_OPERR FLASH_C2SR_OPERR_Msk /*!< CPU2 Operation error */ +#define FLASH_C2SR_PROGERR_Pos (3U) +#define FLASH_C2SR_PROGERR_Msk (0x1UL << FLASH_C2SR_PROGERR_Pos) /*!< 0x00000008 */ +#define FLASH_C2SR_PROGERR FLASH_C2SR_PROGERR_Msk /*!< CPU2 Programming error */ +#define FLASH_C2SR_WRPERR_Pos (4U) +#define FLASH_C2SR_WRPERR_Msk (0x1UL << FLASH_C2SR_WRPERR_Pos) /*!< 0x00000010 */ +#define FLASH_C2SR_WRPERR FLASH_C2SR_WRPERR_Msk /*!< CPU2 Write protection error */ +#define FLASH_C2SR_PGAERR_Pos (5U) +#define FLASH_C2SR_PGAERR_Msk (0x1UL << FLASH_C2SR_PGAERR_Pos) /*!< 0x00000020 */ +#define FLASH_C2SR_PGAERR FLASH_C2SR_PGAERR_Msk /*!< CPU2 Programming alignment error */ +#define FLASH_C2SR_SIZERR_Pos (6U) +#define FLASH_C2SR_SIZERR_Msk (0x1UL << FLASH_C2SR_SIZERR_Pos) /*!< 0x00000040 */ +#define FLASH_C2SR_SIZERR FLASH_C2SR_SIZERR_Msk /*!< CPU2 Size error */ +#define FLASH_C2SR_PGSERR_Pos (7U) +#define FLASH_C2SR_PGSERR_Msk (0x1UL << FLASH_C2SR_PGSERR_Pos) /*!< 0x00000080 */ +#define FLASH_C2SR_PGSERR FLASH_C2SR_PGSERR_Msk /*!< CPU2 Programming sequence error */ +#define FLASH_C2SR_MISERR_Pos (8U) +#define FLASH_C2SR_MISERR_Msk (0x1UL << FLASH_C2SR_MISERR_Pos) /*!< 0x00000100 */ +#define FLASH_C2SR_MISERR FLASH_C2SR_MISERR_Msk /*!< CPU2 Fast programming data miss error */ +#define FLASH_C2SR_FASTERR_Pos (9U) +#define FLASH_C2SR_FASTERR_Msk (0x1UL << FLASH_C2SR_FASTERR_Pos) /*!< 0x00000200 */ +#define FLASH_C2SR_FASTERR FLASH_C2SR_FASTERR_Msk /*!< CPU2 Fast programming error */ +#define FLASH_C2SR_RDERR_Pos (14U) +#define FLASH_C2SR_RDERR_Msk (0x1UL << FLASH_C2SR_RDERR_Pos) /*!< 0x00004000 */ +#define FLASH_C2SR_RDERR FLASH_C2SR_RDERR_Msk /*!< CPU2 PCROP read error */ +#define FLASH_C2SR_BSY_Pos (16U) +#define FLASH_C2SR_BSY_Msk (0x1UL << FLASH_C2SR_BSY_Pos) /*!< 0x00010000 */ +#define FLASH_C2SR_BSY FLASH_C2SR_BSY_Msk /*!< CPU2 Flash busy */ +#define FLASH_C2SR_CFGBSY_Pos (18U) +#define FLASH_C2SR_CFGBSY_Msk (0x1UL << FLASH_C2SR_CFGBSY_Pos) /*!< 0x00040000 */ +#define FLASH_C2SR_CFGBSY FLASH_C2SR_CFGBSY_Msk /*!< CPU2 Programming or erase configuration busy */ +#define FLASH_C2SR_PESD_Pos (19U) +#define FLASH_C2SR_PESD_Msk (0x1UL << FLASH_C2SR_PESD_Pos) /*!< 0x00080000 */ +#define FLASH_C2SR_PESD FLASH_C2SR_PESD_Msk /*!< CPU2 Programming/erase operation suspended */ + +/****************** Bits definition for FLASH_C2CR register ************/ +#define FLASH_C2CR_PG_Pos (0U) +#define FLASH_C2CR_PG_Msk (0x1UL << FLASH_C2CR_PG_Pos) /*!< 0x00000001 */ +#define FLASH_C2CR_PG FLASH_C2CR_PG_Msk /*!< CPU2 Flash programming */ +#define FLASH_C2CR_PER_Pos (1U) +#define FLASH_C2CR_PER_Msk (0x1UL << FLASH_C2CR_PER_Pos) /*!< 0x00000002 */ +#define FLASH_C2CR_PER FLASH_C2CR_PER_Msk /*!< CPU2 Page erase */ +#define FLASH_C2CR_MER_Pos (2U) +#define FLASH_C2CR_MER_Msk (0x1UL << FLASH_C2CR_MER_Pos) /*!< 0x00000004 */ +#define FLASH_C2CR_MER FLASH_C2CR_MER_Msk /*!< CPU2 Mass erase */ +#define FLASH_C2CR_PNB_Pos (3U) +#define FLASH_C2CR_PNB_Msk (0xFFUL << FLASH_C2CR_PNB_Pos) /*!< 0x000007F8 */ +#define FLASH_C2CR_PNB FLASH_C2CR_PNB_Msk /*!< CPU2 Page number selection mask */ +#define FLASH_C2CR_STRT_Pos (16U) +#define FLASH_C2CR_STRT_Msk (0x1UL << FLASH_C2CR_STRT_Pos) /*!< 0x00010000 */ +#define FLASH_C2CR_STRT FLASH_C2CR_STRT_Msk /*!< CPU2 Start an erase operation */ +#define FLASH_C2CR_FSTPG_Pos (18U) +#define FLASH_C2CR_FSTPG_Msk (0x1UL << FLASH_C2CR_FSTPG_Pos) /*!< 0x00040000 */ +#define FLASH_C2CR_FSTPG FLASH_C2CR_FSTPG_Msk /*!< CPU2 Fast programming */ +#define FLASH_C2CR_EOPIE_Pos (24U) +#define FLASH_C2CR_EOPIE_Msk (0x1UL << FLASH_C2CR_EOPIE_Pos) /*!< 0x01000000 */ +#define FLASH_C2CR_EOPIE FLASH_C2CR_EOPIE_Msk /*!< CPU2 End of operation interrupt enable */ +#define FLASH_C2CR_ERRIE_Pos (25U) +#define FLASH_C2CR_ERRIE_Msk (0x1UL << FLASH_C2CR_ERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_C2CR_ERRIE FLASH_C2CR_ERRIE_Msk /*!< CPU2 Error interrupt enable */ +#define FLASH_C2CR_RDERRIE_Pos (26U) +#define FLASH_C2CR_RDERRIE_Msk (0x1UL << FLASH_C2CR_RDERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_C2CR_RDERRIE FLASH_C2CR_RDERRIE_Msk /*!< CPU2 PCROP read error interrupt enable */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODE0_Pos (0U) +#define GPIO_MODER_MODE0_Msk (0x3UL << GPIO_MODER_MODE0_Pos) /*!< 0x00000003 */ +#define GPIO_MODER_MODE0 GPIO_MODER_MODE0_Msk +#define GPIO_MODER_MODE0_0 (0x1U << GPIO_MODER_MODE0_Pos) /*!< 0x00000001 */ +#define GPIO_MODER_MODE0_1 (0x2U << GPIO_MODER_MODE0_Pos) /*!< 0x00000002 */ +#define GPIO_MODER_MODE1_Pos (2U) +#define GPIO_MODER_MODE1_Msk (0x3UL << GPIO_MODER_MODE1_Pos) /*!< 0x0000000C */ +#define GPIO_MODER_MODE1 GPIO_MODER_MODE1_Msk +#define GPIO_MODER_MODE1_0 (0x1U << GPIO_MODER_MODE1_Pos) /*!< 0x00000004 */ +#define GPIO_MODER_MODE1_1 (0x2U << GPIO_MODER_MODE1_Pos) /*!< 0x00000008 */ +#define GPIO_MODER_MODE2_Pos (4U) +#define GPIO_MODER_MODE2_Msk (0x3UL << GPIO_MODER_MODE2_Pos) /*!< 0x00000030 */ +#define GPIO_MODER_MODE2 GPIO_MODER_MODE2_Msk +#define GPIO_MODER_MODE2_0 (0x1U << GPIO_MODER_MODE2_Pos) /*!< 0x00000010 */ +#define GPIO_MODER_MODE2_1 (0x2U << GPIO_MODER_MODE2_Pos) /*!< 0x00000020 */ +#define GPIO_MODER_MODE3_Pos (6U) +#define GPIO_MODER_MODE3_Msk (0x3UL << GPIO_MODER_MODE3_Pos) /*!< 0x000000C0 */ +#define GPIO_MODER_MODE3 GPIO_MODER_MODE3_Msk +#define GPIO_MODER_MODE3_0 (0x1U << GPIO_MODER_MODE3_Pos) /*!< 0x00000040 */ +#define GPIO_MODER_MODE3_1 (0x2U << GPIO_MODER_MODE3_Pos) /*!< 0x00000080 */ +#define GPIO_MODER_MODE4_Pos (8U) +#define GPIO_MODER_MODE4_Msk (0x3UL << GPIO_MODER_MODE4_Pos) /*!< 0x00000300 */ +#define GPIO_MODER_MODE4 GPIO_MODER_MODE4_Msk +#define GPIO_MODER_MODE4_0 (0x1U << GPIO_MODER_MODE4_Pos) /*!< 0x00000100 */ +#define GPIO_MODER_MODE4_1 (0x2U << GPIO_MODER_MODE4_Pos) /*!< 0x00000200 */ +#define GPIO_MODER_MODE5_Pos (10U) +#define GPIO_MODER_MODE5_Msk (0x3UL << GPIO_MODER_MODE5_Pos) /*!< 0x00000C00 */ +#define GPIO_MODER_MODE5 GPIO_MODER_MODE5_Msk +#define GPIO_MODER_MODE5_0 (0x1U << GPIO_MODER_MODE5_Pos) /*!< 0x00000400 */ +#define GPIO_MODER_MODE5_1 (0x2U << GPIO_MODER_MODE5_Pos) /*!< 0x00000800 */ +#define GPIO_MODER_MODE6_Pos (12U) +#define GPIO_MODER_MODE6_Msk (0x3UL << GPIO_MODER_MODE6_Pos) /*!< 0x00003000 */ +#define GPIO_MODER_MODE6 GPIO_MODER_MODE6_Msk +#define GPIO_MODER_MODE6_0 (0x1U << GPIO_MODER_MODE6_Pos) /*!< 0x00001000 */ +#define GPIO_MODER_MODE6_1 (0x2U << GPIO_MODER_MODE6_Pos) /*!< 0x00002000 */ +#define GPIO_MODER_MODE7_Pos (14U) +#define GPIO_MODER_MODE7_Msk (0x3UL << GPIO_MODER_MODE7_Pos) /*!< 0x0000C000 */ +#define GPIO_MODER_MODE7 GPIO_MODER_MODE7_Msk +#define GPIO_MODER_MODE7_0 (0x1U << GPIO_MODER_MODE7_Pos) /*!< 0x00004000 */ +#define GPIO_MODER_MODE7_1 (0x2U << GPIO_MODER_MODE7_Pos) /*!< 0x00008000 */ +#define GPIO_MODER_MODE8_Pos (16U) +#define GPIO_MODER_MODE8_Msk (0x3UL << GPIO_MODER_MODE8_Pos) /*!< 0x00030000 */ +#define GPIO_MODER_MODE8 GPIO_MODER_MODE8_Msk +#define GPIO_MODER_MODE8_0 (0x1U << GPIO_MODER_MODE8_Pos) /*!< 0x00010000 */ +#define GPIO_MODER_MODE8_1 (0x2U << GPIO_MODER_MODE8_Pos) /*!< 0x00020000 */ +#define GPIO_MODER_MODE9_Pos (18U) +#define GPIO_MODER_MODE9_Msk (0x3UL << GPIO_MODER_MODE9_Pos) /*!< 0x000C0000 */ +#define GPIO_MODER_MODE9 GPIO_MODER_MODE9_Msk +#define GPIO_MODER_MODE9_0 (0x1U << GPIO_MODER_MODE9_Pos) /*!< 0x00040000 */ +#define GPIO_MODER_MODE9_1 (0x2U << GPIO_MODER_MODE9_Pos) /*!< 0x00080000 */ +#define GPIO_MODER_MODE10_Pos (20U) +#define GPIO_MODER_MODE10_Msk (0x3UL << GPIO_MODER_MODE10_Pos) /*!< 0x00300000 */ +#define GPIO_MODER_MODE10 GPIO_MODER_MODE10_Msk +#define GPIO_MODER_MODE10_0 (0x1U << GPIO_MODER_MODE10_Pos) /*!< 0x00100000 */ +#define GPIO_MODER_MODE10_1 (0x2U << GPIO_MODER_MODE10_Pos) /*!< 0x00200000 */ +#define GPIO_MODER_MODE11_Pos (22U) +#define GPIO_MODER_MODE11_Msk (0x3UL << GPIO_MODER_MODE11_Pos) /*!< 0x00C00000 */ +#define GPIO_MODER_MODE11 GPIO_MODER_MODE11_Msk +#define GPIO_MODER_MODE11_0 (0x1U << GPIO_MODER_MODE11_Pos) /*!< 0x00400000 */ +#define GPIO_MODER_MODE11_1 (0x2U << GPIO_MODER_MODE11_Pos) /*!< 0x00800000 */ +#define GPIO_MODER_MODE12_Pos (24U) +#define GPIO_MODER_MODE12_Msk (0x3UL << GPIO_MODER_MODE12_Pos) /*!< 0x03000000 */ +#define GPIO_MODER_MODE12 GPIO_MODER_MODE12_Msk +#define GPIO_MODER_MODE12_0 (0x1U << GPIO_MODER_MODE12_Pos) /*!< 0x01000000 */ +#define GPIO_MODER_MODE12_1 (0x2U << GPIO_MODER_MODE12_Pos) /*!< 0x02000000 */ +#define GPIO_MODER_MODE13_Pos (26U) +#define GPIO_MODER_MODE13_Msk (0x3UL << GPIO_MODER_MODE13_Pos) /*!< 0x0C000000 */ +#define GPIO_MODER_MODE13 GPIO_MODER_MODE13_Msk +#define GPIO_MODER_MODE13_0 (0x1U << GPIO_MODER_MODE13_Pos) /*!< 0x04000000 */ +#define GPIO_MODER_MODE13_1 (0x2U << GPIO_MODER_MODE13_Pos) /*!< 0x08000000 */ +#define GPIO_MODER_MODE14_Pos (28U) +#define GPIO_MODER_MODE14_Msk (0x3UL << GPIO_MODER_MODE14_Pos) /*!< 0x30000000 */ +#define GPIO_MODER_MODE14 GPIO_MODER_MODE14_Msk +#define GPIO_MODER_MODE14_0 (0x1U << GPIO_MODER_MODE14_Pos) /*!< 0x10000000 */ +#define GPIO_MODER_MODE14_1 (0x2U << GPIO_MODER_MODE14_Pos) /*!< 0x20000000 */ +#define GPIO_MODER_MODE15_Pos (30U) +#define GPIO_MODER_MODE15_Msk (0x3UL << GPIO_MODER_MODE15_Pos) /*!< 0xC0000000 */ +#define GPIO_MODER_MODE15 GPIO_MODER_MODE15_Msk +#define GPIO_MODER_MODE15_0 (0x1U << GPIO_MODER_MODE15_Pos) /*!< 0x40000000 */ +#define GPIO_MODER_MODE15_1 (0x2U << GPIO_MODER_MODE15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT0_Pos (0U) +#define GPIO_OTYPER_OT0_Msk (0x1UL << GPIO_OTYPER_OT0_Pos) /*!< 0x00000001 */ +#define GPIO_OTYPER_OT0 GPIO_OTYPER_OT0_Msk +#define GPIO_OTYPER_OT1_Pos (1U) +#define GPIO_OTYPER_OT1_Msk (0x1UL << GPIO_OTYPER_OT1_Pos) /*!< 0x00000002 */ +#define GPIO_OTYPER_OT1 GPIO_OTYPER_OT1_Msk +#define GPIO_OTYPER_OT2_Pos (2U) +#define GPIO_OTYPER_OT2_Msk (0x1UL << GPIO_OTYPER_OT2_Pos) /*!< 0x00000004 */ +#define GPIO_OTYPER_OT2 GPIO_OTYPER_OT2_Msk +#define GPIO_OTYPER_OT3_Pos (3U) +#define GPIO_OTYPER_OT3_Msk (0x1UL << GPIO_OTYPER_OT3_Pos) /*!< 0x00000008 */ +#define GPIO_OTYPER_OT3 GPIO_OTYPER_OT3_Msk +#define GPIO_OTYPER_OT4_Pos (4U) +#define GPIO_OTYPER_OT4_Msk (0x1UL << GPIO_OTYPER_OT4_Pos) /*!< 0x00000010 */ +#define GPIO_OTYPER_OT4 GPIO_OTYPER_OT4_Msk +#define GPIO_OTYPER_OT5_Pos (5U) +#define GPIO_OTYPER_OT5_Msk (0x1UL << GPIO_OTYPER_OT5_Pos) /*!< 0x00000020 */ +#define GPIO_OTYPER_OT5 GPIO_OTYPER_OT5_Msk +#define GPIO_OTYPER_OT6_Pos (6U) +#define GPIO_OTYPER_OT6_Msk (0x1UL << GPIO_OTYPER_OT6_Pos) /*!< 0x00000040 */ +#define GPIO_OTYPER_OT6 GPIO_OTYPER_OT6_Msk +#define GPIO_OTYPER_OT7_Pos (7U) +#define GPIO_OTYPER_OT7_Msk (0x1UL << GPIO_OTYPER_OT7_Pos) /*!< 0x00000080 */ +#define GPIO_OTYPER_OT7 GPIO_OTYPER_OT7_Msk +#define GPIO_OTYPER_OT8_Pos (8U) +#define GPIO_OTYPER_OT8_Msk (0x1UL << GPIO_OTYPER_OT8_Pos) /*!< 0x00000100 */ +#define GPIO_OTYPER_OT8 GPIO_OTYPER_OT8_Msk +#define GPIO_OTYPER_OT9_Pos (9U) +#define GPIO_OTYPER_OT9_Msk (0x1UL << GPIO_OTYPER_OT9_Pos) /*!< 0x00000200 */ +#define GPIO_OTYPER_OT9 GPIO_OTYPER_OT9_Msk +#define GPIO_OTYPER_OT10_Pos (10U) +#define GPIO_OTYPER_OT10_Msk (0x1UL << GPIO_OTYPER_OT10_Pos) /*!< 0x00000400 */ +#define GPIO_OTYPER_OT10 GPIO_OTYPER_OT10_Msk +#define GPIO_OTYPER_OT11_Pos (11U) +#define GPIO_OTYPER_OT11_Msk (0x1UL << GPIO_OTYPER_OT11_Pos) /*!< 0x00000800 */ +#define GPIO_OTYPER_OT11 GPIO_OTYPER_OT11_Msk +#define GPIO_OTYPER_OT12_Pos (12U) +#define GPIO_OTYPER_OT12_Msk (0x1UL << GPIO_OTYPER_OT12_Pos) /*!< 0x00001000 */ +#define GPIO_OTYPER_OT12 GPIO_OTYPER_OT12_Msk +#define GPIO_OTYPER_OT13_Pos (13U) +#define GPIO_OTYPER_OT13_Msk (0x1UL << GPIO_OTYPER_OT13_Pos) /*!< 0x00002000 */ +#define GPIO_OTYPER_OT13 GPIO_OTYPER_OT13_Msk +#define GPIO_OTYPER_OT14_Pos (14U) +#define GPIO_OTYPER_OT14_Msk (0x1UL << GPIO_OTYPER_OT14_Pos) /*!< 0x00004000 */ +#define GPIO_OTYPER_OT14 GPIO_OTYPER_OT14_Msk +#define GPIO_OTYPER_OT15_Pos (15U) +#define GPIO_OTYPER_OT15_Msk (0x1UL << GPIO_OTYPER_OT15_Pos) /*!< 0x00008000 */ +#define GPIO_OTYPER_OT15 GPIO_OTYPER_OT15_Msk + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDR_OSPEED0_Pos (0U) +#define GPIO_OSPEEDR_OSPEED0_Msk (0x3UL << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000003 */ +#define GPIO_OSPEEDR_OSPEED0 GPIO_OSPEEDR_OSPEED0_Msk +#define GPIO_OSPEEDR_OSPEED0_0 (0x1U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000001 */ +#define GPIO_OSPEEDR_OSPEED0_1 (0x2U << GPIO_OSPEEDR_OSPEED0_Pos) /*!< 0x00000002 */ +#define GPIO_OSPEEDR_OSPEED1_Pos (2U) +#define GPIO_OSPEEDR_OSPEED1_Msk (0x3UL << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x0000000C */ +#define GPIO_OSPEEDR_OSPEED1 GPIO_OSPEEDR_OSPEED1_Msk +#define GPIO_OSPEEDR_OSPEED1_0 (0x1U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000004 */ +#define GPIO_OSPEEDR_OSPEED1_1 (0x2U << GPIO_OSPEEDR_OSPEED1_Pos) /*!< 0x00000008 */ +#define GPIO_OSPEEDR_OSPEED2_Pos (4U) +#define GPIO_OSPEEDR_OSPEED2_Msk (0x3UL << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000030 */ +#define GPIO_OSPEEDR_OSPEED2 GPIO_OSPEEDR_OSPEED2_Msk +#define GPIO_OSPEEDR_OSPEED2_0 (0x1U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000010 */ +#define GPIO_OSPEEDR_OSPEED2_1 (0x2U << GPIO_OSPEEDR_OSPEED2_Pos) /*!< 0x00000020 */ +#define GPIO_OSPEEDR_OSPEED3_Pos (6U) +#define GPIO_OSPEEDR_OSPEED3_Msk (0x3UL << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x000000C0 */ +#define GPIO_OSPEEDR_OSPEED3 GPIO_OSPEEDR_OSPEED3_Msk +#define GPIO_OSPEEDR_OSPEED3_0 (0x1U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000040 */ +#define GPIO_OSPEEDR_OSPEED3_1 (0x2U << GPIO_OSPEEDR_OSPEED3_Pos) /*!< 0x00000080 */ +#define GPIO_OSPEEDR_OSPEED4_Pos (8U) +#define GPIO_OSPEEDR_OSPEED4_Msk (0x3UL << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000300 */ +#define GPIO_OSPEEDR_OSPEED4 GPIO_OSPEEDR_OSPEED4_Msk +#define GPIO_OSPEEDR_OSPEED4_0 (0x1U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000100 */ +#define GPIO_OSPEEDR_OSPEED4_1 (0x2U << GPIO_OSPEEDR_OSPEED4_Pos) /*!< 0x00000200 */ +#define GPIO_OSPEEDR_OSPEED5_Pos (10U) +#define GPIO_OSPEEDR_OSPEED5_Msk (0x3UL << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000C00 */ +#define GPIO_OSPEEDR_OSPEED5 GPIO_OSPEEDR_OSPEED5_Msk +#define GPIO_OSPEEDR_OSPEED5_0 (0x1U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000400 */ +#define GPIO_OSPEEDR_OSPEED5_1 (0x2U << GPIO_OSPEEDR_OSPEED5_Pos) /*!< 0x00000800 */ +#define GPIO_OSPEEDR_OSPEED6_Pos (12U) +#define GPIO_OSPEEDR_OSPEED6_Msk (0x3UL << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00003000 */ +#define GPIO_OSPEEDR_OSPEED6 GPIO_OSPEEDR_OSPEED6_Msk +#define GPIO_OSPEEDR_OSPEED6_0 (0x1U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00001000 */ +#define GPIO_OSPEEDR_OSPEED6_1 (0x2U << GPIO_OSPEEDR_OSPEED6_Pos) /*!< 0x00002000 */ +#define GPIO_OSPEEDR_OSPEED7_Pos (14U) +#define GPIO_OSPEEDR_OSPEED7_Msk (0x3UL << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x0000C000 */ +#define GPIO_OSPEEDR_OSPEED7 GPIO_OSPEEDR_OSPEED7_Msk +#define GPIO_OSPEEDR_OSPEED7_0 (0x1U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00004000 */ +#define GPIO_OSPEEDR_OSPEED7_1 (0x2U << GPIO_OSPEEDR_OSPEED7_Pos) /*!< 0x00008000 */ +#define GPIO_OSPEEDR_OSPEED8_Pos (16U) +#define GPIO_OSPEEDR_OSPEED8_Msk (0x3UL << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00030000 */ +#define GPIO_OSPEEDR_OSPEED8 GPIO_OSPEEDR_OSPEED8_Msk +#define GPIO_OSPEEDR_OSPEED8_0 (0x1U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00010000 */ +#define GPIO_OSPEEDR_OSPEED8_1 (0x2U << GPIO_OSPEEDR_OSPEED8_Pos) /*!< 0x00020000 */ +#define GPIO_OSPEEDR_OSPEED9_Pos (18U) +#define GPIO_OSPEEDR_OSPEED9_Msk (0x3UL << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x000C0000 */ +#define GPIO_OSPEEDR_OSPEED9 GPIO_OSPEEDR_OSPEED9_Msk +#define GPIO_OSPEEDR_OSPEED9_0 (0x1U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00040000 */ +#define GPIO_OSPEEDR_OSPEED9_1 (0x2U << GPIO_OSPEEDR_OSPEED9_Pos) /*!< 0x00080000 */ +#define GPIO_OSPEEDR_OSPEED10_Pos (20U) +#define GPIO_OSPEEDR_OSPEED10_Msk (0x3UL << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00300000 */ +#define GPIO_OSPEEDR_OSPEED10 GPIO_OSPEEDR_OSPEED10_Msk +#define GPIO_OSPEEDR_OSPEED10_0 (0x1U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00100000 */ +#define GPIO_OSPEEDR_OSPEED10_1 (0x2U << GPIO_OSPEEDR_OSPEED10_Pos) /*!< 0x00200000 */ +#define GPIO_OSPEEDR_OSPEED11_Pos (22U) +#define GPIO_OSPEEDR_OSPEED11_Msk (0x3UL << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00C00000 */ +#define GPIO_OSPEEDR_OSPEED11 GPIO_OSPEEDR_OSPEED11_Msk +#define GPIO_OSPEEDR_OSPEED11_0 (0x1U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00400000 */ +#define GPIO_OSPEEDR_OSPEED11_1 (0x2U << GPIO_OSPEEDR_OSPEED11_Pos) /*!< 0x00800000 */ +#define GPIO_OSPEEDR_OSPEED12_Pos (24U) +#define GPIO_OSPEEDR_OSPEED12_Msk (0x3UL << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x03000000 */ +#define GPIO_OSPEEDR_OSPEED12 GPIO_OSPEEDR_OSPEED12_Msk +#define GPIO_OSPEEDR_OSPEED12_0 (0x1U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x01000000 */ +#define GPIO_OSPEEDR_OSPEED12_1 (0x2U << GPIO_OSPEEDR_OSPEED12_Pos) /*!< 0x02000000 */ +#define GPIO_OSPEEDR_OSPEED13_Pos (26U) +#define GPIO_OSPEEDR_OSPEED13_Msk (0x3UL << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x0C000000 */ +#define GPIO_OSPEEDR_OSPEED13 GPIO_OSPEEDR_OSPEED13_Msk +#define GPIO_OSPEEDR_OSPEED13_0 (0x1U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x04000000 */ +#define GPIO_OSPEEDR_OSPEED13_1 (0x2U << GPIO_OSPEEDR_OSPEED13_Pos) /*!< 0x08000000 */ +#define GPIO_OSPEEDR_OSPEED14_Pos (28U) +#define GPIO_OSPEEDR_OSPEED14_Msk (0x3UL << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x30000000 */ +#define GPIO_OSPEEDR_OSPEED14 GPIO_OSPEEDR_OSPEED14_Msk +#define GPIO_OSPEEDR_OSPEED14_0 (0x1U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x10000000 */ +#define GPIO_OSPEEDR_OSPEED14_1 (0x2U << GPIO_OSPEEDR_OSPEED14_Pos) /*!< 0x20000000 */ +#define GPIO_OSPEEDR_OSPEED15_Pos (30U) +#define GPIO_OSPEEDR_OSPEED15_Msk (0x3UL << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0xC0000000 */ +#define GPIO_OSPEEDR_OSPEED15 GPIO_OSPEEDR_OSPEED15_Msk +#define GPIO_OSPEEDR_OSPEED15_0 (0x1U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x40000000 */ +#define GPIO_OSPEEDR_OSPEED15_1 (0x2U << GPIO_OSPEEDR_OSPEED15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPD0_Pos (0U) +#define GPIO_PUPDR_PUPD0_Msk (0x3UL << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000003 */ +#define GPIO_PUPDR_PUPD0 GPIO_PUPDR_PUPD0_Msk +#define GPIO_PUPDR_PUPD0_0 (0x1U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000001 */ +#define GPIO_PUPDR_PUPD0_1 (0x2U << GPIO_PUPDR_PUPD0_Pos) /*!< 0x00000002 */ +#define GPIO_PUPDR_PUPD1_Pos (2U) +#define GPIO_PUPDR_PUPD1_Msk (0x3UL << GPIO_PUPDR_PUPD1_Pos) /*!< 0x0000000C */ +#define GPIO_PUPDR_PUPD1 GPIO_PUPDR_PUPD1_Msk +#define GPIO_PUPDR_PUPD1_0 (0x1U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000004 */ +#define GPIO_PUPDR_PUPD1_1 (0x2U << GPIO_PUPDR_PUPD1_Pos) /*!< 0x00000008 */ +#define GPIO_PUPDR_PUPD2_Pos (4U) +#define GPIO_PUPDR_PUPD2_Msk (0x3UL << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000030 */ +#define GPIO_PUPDR_PUPD2 GPIO_PUPDR_PUPD2_Msk +#define GPIO_PUPDR_PUPD2_0 (0x1U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000010 */ +#define GPIO_PUPDR_PUPD2_1 (0x2U << GPIO_PUPDR_PUPD2_Pos) /*!< 0x00000020 */ +#define GPIO_PUPDR_PUPD3_Pos (6U) +#define GPIO_PUPDR_PUPD3_Msk (0x3UL << GPIO_PUPDR_PUPD3_Pos) /*!< 0x000000C0 */ +#define GPIO_PUPDR_PUPD3 GPIO_PUPDR_PUPD3_Msk +#define GPIO_PUPDR_PUPD3_0 (0x1U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000040 */ +#define GPIO_PUPDR_PUPD3_1 (0x2U << GPIO_PUPDR_PUPD3_Pos) /*!< 0x00000080 */ +#define GPIO_PUPDR_PUPD4_Pos (8U) +#define GPIO_PUPDR_PUPD4_Msk (0x3UL << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000300 */ +#define GPIO_PUPDR_PUPD4 GPIO_PUPDR_PUPD4_Msk +#define GPIO_PUPDR_PUPD4_0 (0x1U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000100 */ +#define GPIO_PUPDR_PUPD4_1 (0x2U << GPIO_PUPDR_PUPD4_Pos) /*!< 0x00000200 */ +#define GPIO_PUPDR_PUPD5_Pos (10U) +#define GPIO_PUPDR_PUPD5_Msk (0x3UL << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000C00 */ +#define GPIO_PUPDR_PUPD5 GPIO_PUPDR_PUPD5_Msk +#define GPIO_PUPDR_PUPD5_0 (0x1U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000400 */ +#define GPIO_PUPDR_PUPD5_1 (0x2U << GPIO_PUPDR_PUPD5_Pos) /*!< 0x00000800 */ +#define GPIO_PUPDR_PUPD6_Pos (12U) +#define GPIO_PUPDR_PUPD6_Msk (0x3UL << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00003000 */ +#define GPIO_PUPDR_PUPD6 GPIO_PUPDR_PUPD6_Msk +#define GPIO_PUPDR_PUPD6_0 (0x1U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00001000 */ +#define GPIO_PUPDR_PUPD6_1 (0x2U << GPIO_PUPDR_PUPD6_Pos) /*!< 0x00002000 */ +#define GPIO_PUPDR_PUPD7_Pos (14U) +#define GPIO_PUPDR_PUPD7_Msk (0x3UL << GPIO_PUPDR_PUPD7_Pos) /*!< 0x0000C000 */ +#define GPIO_PUPDR_PUPD7 GPIO_PUPDR_PUPD7_Msk +#define GPIO_PUPDR_PUPD7_0 (0x1U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00004000 */ +#define GPIO_PUPDR_PUPD7_1 (0x2U << GPIO_PUPDR_PUPD7_Pos) /*!< 0x00008000 */ +#define GPIO_PUPDR_PUPD8_Pos (16U) +#define GPIO_PUPDR_PUPD8_Msk (0x3UL << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00030000 */ +#define GPIO_PUPDR_PUPD8 GPIO_PUPDR_PUPD8_Msk +#define GPIO_PUPDR_PUPD8_0 (0x1U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00010000 */ +#define GPIO_PUPDR_PUPD8_1 (0x2U << GPIO_PUPDR_PUPD8_Pos) /*!< 0x00020000 */ +#define GPIO_PUPDR_PUPD9_Pos (18U) +#define GPIO_PUPDR_PUPD9_Msk (0x3UL << GPIO_PUPDR_PUPD9_Pos) /*!< 0x000C0000 */ +#define GPIO_PUPDR_PUPD9 GPIO_PUPDR_PUPD9_Msk +#define GPIO_PUPDR_PUPD9_0 (0x1U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00040000 */ +#define GPIO_PUPDR_PUPD9_1 (0x2U << GPIO_PUPDR_PUPD9_Pos) /*!< 0x00080000 */ +#define GPIO_PUPDR_PUPD10_Pos (20U) +#define GPIO_PUPDR_PUPD10_Msk (0x3UL << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00300000 */ +#define GPIO_PUPDR_PUPD10 GPIO_PUPDR_PUPD10_Msk +#define GPIO_PUPDR_PUPD10_0 (0x1U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00100000 */ +#define GPIO_PUPDR_PUPD10_1 (0x2U << GPIO_PUPDR_PUPD10_Pos) /*!< 0x00200000 */ +#define GPIO_PUPDR_PUPD11_Pos (22U) +#define GPIO_PUPDR_PUPD11_Msk (0x3UL << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00C00000 */ +#define GPIO_PUPDR_PUPD11 GPIO_PUPDR_PUPD11_Msk +#define GPIO_PUPDR_PUPD11_0 (0x1U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00400000 */ +#define GPIO_PUPDR_PUPD11_1 (0x2U << GPIO_PUPDR_PUPD11_Pos) /*!< 0x00800000 */ +#define GPIO_PUPDR_PUPD12_Pos (24U) +#define GPIO_PUPDR_PUPD12_Msk (0x3UL << GPIO_PUPDR_PUPD12_Pos) /*!< 0x03000000 */ +#define GPIO_PUPDR_PUPD12 GPIO_PUPDR_PUPD12_Msk +#define GPIO_PUPDR_PUPD12_0 (0x1U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x01000000 */ +#define GPIO_PUPDR_PUPD12_1 (0x2U << GPIO_PUPDR_PUPD12_Pos) /*!< 0x02000000 */ +#define GPIO_PUPDR_PUPD13_Pos (26U) +#define GPIO_PUPDR_PUPD13_Msk (0x3UL << GPIO_PUPDR_PUPD13_Pos) /*!< 0x0C000000 */ +#define GPIO_PUPDR_PUPD13 GPIO_PUPDR_PUPD13_Msk +#define GPIO_PUPDR_PUPD13_0 (0x1U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x04000000 */ +#define GPIO_PUPDR_PUPD13_1 (0x2U << GPIO_PUPDR_PUPD13_Pos) /*!< 0x08000000 */ +#define GPIO_PUPDR_PUPD14_Pos (28U) +#define GPIO_PUPDR_PUPD14_Msk (0x3UL << GPIO_PUPDR_PUPD14_Pos) /*!< 0x30000000 */ +#define GPIO_PUPDR_PUPD14 GPIO_PUPDR_PUPD14_Msk +#define GPIO_PUPDR_PUPD14_0 (0x1U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x10000000 */ +#define GPIO_PUPDR_PUPD14_1 (0x2U << GPIO_PUPDR_PUPD14_Pos) /*!< 0x20000000 */ +#define GPIO_PUPDR_PUPD15_Pos (30U) +#define GPIO_PUPDR_PUPD15_Msk (0x3UL << GPIO_PUPDR_PUPD15_Pos) /*!< 0xC0000000 */ +#define GPIO_PUPDR_PUPD15 GPIO_PUPDR_PUPD15_Msk +#define GPIO_PUPDR_PUPD15_0 (0x1U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x40000000 */ +#define GPIO_PUPDR_PUPD15_1 (0x2U << GPIO_PUPDR_PUPD15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_ID0_Pos (0U) +#define GPIO_IDR_ID0_Msk (0x1UL << GPIO_IDR_ID0_Pos) /*!< 0x00000001 */ +#define GPIO_IDR_ID0 GPIO_IDR_ID0_Msk +#define GPIO_IDR_ID1_Pos (1U) +#define GPIO_IDR_ID1_Msk (0x1UL << GPIO_IDR_ID1_Pos) /*!< 0x00000002 */ +#define GPIO_IDR_ID1 GPIO_IDR_ID1_Msk +#define GPIO_IDR_ID2_Pos (2U) +#define GPIO_IDR_ID2_Msk (0x1UL << GPIO_IDR_ID2_Pos) /*!< 0x00000004 */ +#define GPIO_IDR_ID2 GPIO_IDR_ID2_Msk +#define GPIO_IDR_ID3_Pos (3U) +#define GPIO_IDR_ID3_Msk (0x1UL << GPIO_IDR_ID3_Pos) /*!< 0x00000008 */ +#define GPIO_IDR_ID3 GPIO_IDR_ID3_Msk +#define GPIO_IDR_ID4_Pos (4U) +#define GPIO_IDR_ID4_Msk (0x1UL << GPIO_IDR_ID4_Pos) /*!< 0x00000010 */ +#define GPIO_IDR_ID4 GPIO_IDR_ID4_Msk +#define GPIO_IDR_ID5_Pos (5U) +#define GPIO_IDR_ID5_Msk (0x1UL << GPIO_IDR_ID5_Pos) /*!< 0x00000020 */ +#define GPIO_IDR_ID5 GPIO_IDR_ID5_Msk +#define GPIO_IDR_ID6_Pos (6U) +#define GPIO_IDR_ID6_Msk (0x1UL << GPIO_IDR_ID6_Pos) /*!< 0x00000040 */ +#define GPIO_IDR_ID6 GPIO_IDR_ID6_Msk +#define GPIO_IDR_ID7_Pos (7U) +#define GPIO_IDR_ID7_Msk (0x1UL << GPIO_IDR_ID7_Pos) /*!< 0x00000080 */ +#define GPIO_IDR_ID7 GPIO_IDR_ID7_Msk +#define GPIO_IDR_ID8_Pos (8U) +#define GPIO_IDR_ID8_Msk (0x1UL << GPIO_IDR_ID8_Pos) /*!< 0x00000100 */ +#define GPIO_IDR_ID8 GPIO_IDR_ID8_Msk +#define GPIO_IDR_ID9_Pos (9U) +#define GPIO_IDR_ID9_Msk (0x1UL << GPIO_IDR_ID9_Pos) /*!< 0x00000200 */ +#define GPIO_IDR_ID9 GPIO_IDR_ID9_Msk +#define GPIO_IDR_ID10_Pos (10U) +#define GPIO_IDR_ID10_Msk (0x1UL << GPIO_IDR_ID10_Pos) /*!< 0x00000400 */ +#define GPIO_IDR_ID10 GPIO_IDR_ID10_Msk +#define GPIO_IDR_ID11_Pos (11U) +#define GPIO_IDR_ID11_Msk (0x1UL << GPIO_IDR_ID11_Pos) /*!< 0x00000800 */ +#define GPIO_IDR_ID11 GPIO_IDR_ID11_Msk +#define GPIO_IDR_ID12_Pos (12U) +#define GPIO_IDR_ID12_Msk (0x1UL << GPIO_IDR_ID12_Pos) /*!< 0x00001000 */ +#define GPIO_IDR_ID12 GPIO_IDR_ID12_Msk +#define GPIO_IDR_ID13_Pos (13U) +#define GPIO_IDR_ID13_Msk (0x1UL << GPIO_IDR_ID13_Pos) /*!< 0x00002000 */ +#define GPIO_IDR_ID13 GPIO_IDR_ID13_Msk +#define GPIO_IDR_ID14_Pos (14U) +#define GPIO_IDR_ID14_Msk (0x1UL << GPIO_IDR_ID14_Pos) /*!< 0x00004000 */ +#define GPIO_IDR_ID14 GPIO_IDR_ID14_Msk +#define GPIO_IDR_ID15_Pos (15U) +#define GPIO_IDR_ID15_Msk (0x1UL << GPIO_IDR_ID15_Pos) /*!< 0x00008000 */ +#define GPIO_IDR_ID15 GPIO_IDR_ID15_Msk + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_OD0_Pos (0U) +#define GPIO_ODR_OD0_Msk (0x1UL << GPIO_ODR_OD0_Pos) /*!< 0x00000001 */ +#define GPIO_ODR_OD0 GPIO_ODR_OD0_Msk +#define GPIO_ODR_OD1_Pos (1U) +#define GPIO_ODR_OD1_Msk (0x1UL << GPIO_ODR_OD1_Pos) /*!< 0x00000002 */ +#define GPIO_ODR_OD1 GPIO_ODR_OD1_Msk +#define GPIO_ODR_OD2_Pos (2U) +#define GPIO_ODR_OD2_Msk (0x1UL << GPIO_ODR_OD2_Pos) /*!< 0x00000004 */ +#define GPIO_ODR_OD2 GPIO_ODR_OD2_Msk +#define GPIO_ODR_OD3_Pos (3U) +#define GPIO_ODR_OD3_Msk (0x1UL << GPIO_ODR_OD3_Pos) /*!< 0x00000008 */ +#define GPIO_ODR_OD3 GPIO_ODR_OD3_Msk +#define GPIO_ODR_OD4_Pos (4U) +#define GPIO_ODR_OD4_Msk (0x1UL << GPIO_ODR_OD4_Pos) /*!< 0x00000010 */ +#define GPIO_ODR_OD4 GPIO_ODR_OD4_Msk +#define GPIO_ODR_OD5_Pos (5U) +#define GPIO_ODR_OD5_Msk (0x1UL << GPIO_ODR_OD5_Pos) /*!< 0x00000020 */ +#define GPIO_ODR_OD5 GPIO_ODR_OD5_Msk +#define GPIO_ODR_OD6_Pos (6U) +#define GPIO_ODR_OD6_Msk (0x1UL << GPIO_ODR_OD6_Pos) /*!< 0x00000040 */ +#define GPIO_ODR_OD6 GPIO_ODR_OD6_Msk +#define GPIO_ODR_OD7_Pos (7U) +#define GPIO_ODR_OD7_Msk (0x1UL << GPIO_ODR_OD7_Pos) /*!< 0x00000080 */ +#define GPIO_ODR_OD7 GPIO_ODR_OD7_Msk +#define GPIO_ODR_OD8_Pos (8U) +#define GPIO_ODR_OD8_Msk (0x1UL << GPIO_ODR_OD8_Pos) /*!< 0x00000100 */ +#define GPIO_ODR_OD8 GPIO_ODR_OD8_Msk +#define GPIO_ODR_OD9_Pos (9U) +#define GPIO_ODR_OD9_Msk (0x1UL << GPIO_ODR_OD9_Pos) /*!< 0x00000200 */ +#define GPIO_ODR_OD9 GPIO_ODR_OD9_Msk +#define GPIO_ODR_OD10_Pos (10U) +#define GPIO_ODR_OD10_Msk (0x1UL << GPIO_ODR_OD10_Pos) /*!< 0x00000400 */ +#define GPIO_ODR_OD10 GPIO_ODR_OD10_Msk +#define GPIO_ODR_OD11_Pos (11U) +#define GPIO_ODR_OD11_Msk (0x1UL << GPIO_ODR_OD11_Pos) /*!< 0x00000800 */ +#define GPIO_ODR_OD11 GPIO_ODR_OD11_Msk +#define GPIO_ODR_OD12_Pos (12U) +#define GPIO_ODR_OD12_Msk (0x1UL << GPIO_ODR_OD12_Pos) /*!< 0x00001000 */ +#define GPIO_ODR_OD12 GPIO_ODR_OD12_Msk +#define GPIO_ODR_OD13_Pos (13U) +#define GPIO_ODR_OD13_Msk (0x1UL << GPIO_ODR_OD13_Pos) /*!< 0x00002000 */ +#define GPIO_ODR_OD13 GPIO_ODR_OD13_Msk +#define GPIO_ODR_OD14_Pos (14U) +#define GPIO_ODR_OD14_Msk (0x1UL << GPIO_ODR_OD14_Pos) /*!< 0x00004000 */ +#define GPIO_ODR_OD14 GPIO_ODR_OD14_Msk +#define GPIO_ODR_OD15_Pos (15U) +#define GPIO_ODR_OD15_Msk (0x1UL << GPIO_ODR_OD15_Pos) /*!< 0x00008000 */ +#define GPIO_ODR_OD15 GPIO_ODR_OD15_Msk + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS0_Pos (0U) +#define GPIO_BSRR_BS0_Msk (0x1UL << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ +#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk +#define GPIO_BSRR_BS1_Pos (1U) +#define GPIO_BSRR_BS1_Msk (0x1UL << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ +#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk +#define GPIO_BSRR_BS2_Pos (2U) +#define GPIO_BSRR_BS2_Msk (0x1UL << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ +#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk +#define GPIO_BSRR_BS3_Pos (3U) +#define GPIO_BSRR_BS3_Msk (0x1UL << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ +#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk +#define GPIO_BSRR_BS4_Pos (4U) +#define GPIO_BSRR_BS4_Msk (0x1UL << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ +#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk +#define GPIO_BSRR_BS5_Pos (5U) +#define GPIO_BSRR_BS5_Msk (0x1UL << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ +#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk +#define GPIO_BSRR_BS6_Pos (6U) +#define GPIO_BSRR_BS6_Msk (0x1UL << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ +#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk +#define GPIO_BSRR_BS7_Pos (7U) +#define GPIO_BSRR_BS7_Msk (0x1UL << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ +#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk +#define GPIO_BSRR_BS8_Pos (8U) +#define GPIO_BSRR_BS8_Msk (0x1UL << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ +#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk +#define GPIO_BSRR_BS9_Pos (9U) +#define GPIO_BSRR_BS9_Msk (0x1UL << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ +#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk +#define GPIO_BSRR_BS10_Pos (10U) +#define GPIO_BSRR_BS10_Msk (0x1UL << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ +#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk +#define GPIO_BSRR_BS11_Pos (11U) +#define GPIO_BSRR_BS11_Msk (0x1UL << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ +#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk +#define GPIO_BSRR_BS12_Pos (12U) +#define GPIO_BSRR_BS12_Msk (0x1UL << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ +#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk +#define GPIO_BSRR_BS13_Pos (13U) +#define GPIO_BSRR_BS13_Msk (0x1UL << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ +#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk +#define GPIO_BSRR_BS14_Pos (14U) +#define GPIO_BSRR_BS14_Msk (0x1UL << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ +#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk +#define GPIO_BSRR_BS15_Pos (15U) +#define GPIO_BSRR_BS15_Msk (0x1UL << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ +#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk +#define GPIO_BSRR_BR0_Pos (16U) +#define GPIO_BSRR_BR0_Msk (0x1UL << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ +#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk +#define GPIO_BSRR_BR1_Pos (17U) +#define GPIO_BSRR_BR1_Msk (0x1UL << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ +#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk +#define GPIO_BSRR_BR2_Pos (18U) +#define GPIO_BSRR_BR2_Msk (0x1UL << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ +#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk +#define GPIO_BSRR_BR3_Pos (19U) +#define GPIO_BSRR_BR3_Msk (0x1UL << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ +#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk +#define GPIO_BSRR_BR4_Pos (20U) +#define GPIO_BSRR_BR4_Msk (0x1UL << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ +#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk +#define GPIO_BSRR_BR5_Pos (21U) +#define GPIO_BSRR_BR5_Msk (0x1UL << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ +#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk +#define GPIO_BSRR_BR6_Pos (22U) +#define GPIO_BSRR_BR6_Msk (0x1UL << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ +#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk +#define GPIO_BSRR_BR7_Pos (23U) +#define GPIO_BSRR_BR7_Msk (0x1UL << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ +#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk +#define GPIO_BSRR_BR8_Pos (24U) +#define GPIO_BSRR_BR8_Msk (0x1UL << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ +#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk +#define GPIO_BSRR_BR9_Pos (25U) +#define GPIO_BSRR_BR9_Msk (0x1UL << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ +#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk +#define GPIO_BSRR_BR10_Pos (26U) +#define GPIO_BSRR_BR10_Msk (0x1UL << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ +#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk +#define GPIO_BSRR_BR11_Pos (27U) +#define GPIO_BSRR_BR11_Msk (0x1UL << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ +#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk +#define GPIO_BSRR_BR12_Pos (28U) +#define GPIO_BSRR_BR12_Msk (0x1UL << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ +#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk +#define GPIO_BSRR_BR13_Pos (29U) +#define GPIO_BSRR_BR13_Msk (0x1UL << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ +#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk +#define GPIO_BSRR_BR14_Pos (30U) +#define GPIO_BSRR_BR14_Msk (0x1UL << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ +#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk +#define GPIO_BSRR_BR15_Pos (31U) +#define GPIO_BSRR_BR15_Msk (0x1UL << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ +#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk + +/****************** Bit definition for GPIO_LCKR register *********************/ +#define GPIO_LCKR_LCK0_Pos (0U) +#define GPIO_LCKR_LCK0_Msk (0x1UL << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ +#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk +#define GPIO_LCKR_LCK1_Pos (1U) +#define GPIO_LCKR_LCK1_Msk (0x1UL << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ +#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk +#define GPIO_LCKR_LCK2_Pos (2U) +#define GPIO_LCKR_LCK2_Msk (0x1UL << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ +#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk +#define GPIO_LCKR_LCK3_Pos (3U) +#define GPIO_LCKR_LCK3_Msk (0x1UL << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ +#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk +#define GPIO_LCKR_LCK4_Pos (4U) +#define GPIO_LCKR_LCK4_Msk (0x1UL << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ +#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk +#define GPIO_LCKR_LCK5_Pos (5U) +#define GPIO_LCKR_LCK5_Msk (0x1UL << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ +#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk +#define GPIO_LCKR_LCK6_Pos (6U) +#define GPIO_LCKR_LCK6_Msk (0x1UL << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ +#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk +#define GPIO_LCKR_LCK7_Pos (7U) +#define GPIO_LCKR_LCK7_Msk (0x1UL << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ +#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk +#define GPIO_LCKR_LCK8_Pos (8U) +#define GPIO_LCKR_LCK8_Msk (0x1UL << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ +#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk +#define GPIO_LCKR_LCK9_Pos (9U) +#define GPIO_LCKR_LCK9_Msk (0x1UL << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ +#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk +#define GPIO_LCKR_LCK10_Pos (10U) +#define GPIO_LCKR_LCK10_Msk (0x1UL << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ +#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk +#define GPIO_LCKR_LCK11_Pos (11U) +#define GPIO_LCKR_LCK11_Msk (0x1UL << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ +#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk +#define GPIO_LCKR_LCK12_Pos (12U) +#define GPIO_LCKR_LCK12_Msk (0x1UL << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ +#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk +#define GPIO_LCKR_LCK13_Pos (13U) +#define GPIO_LCKR_LCK13_Msk (0x1UL << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ +#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk +#define GPIO_LCKR_LCK14_Pos (14U) +#define GPIO_LCKR_LCK14_Msk (0x1UL << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ +#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk +#define GPIO_LCKR_LCK15_Pos (15U) +#define GPIO_LCKR_LCK15_Msk (0x1UL << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ +#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk +#define GPIO_LCKR_LCKK_Pos (16U) +#define GPIO_LCKR_LCKK_Msk (0x1UL << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ +#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk + +/****************** Bit definition for GPIO_AFRL register *********************/ +#define GPIO_AFRL_AFSEL0_Pos (0U) +#define GPIO_AFRL_AFSEL0_Msk (0xFUL << GPIO_AFRL_AFSEL0_Pos) /*!< 0x0000000F */ +#define GPIO_AFRL_AFSEL0 GPIO_AFRL_AFSEL0_Msk +#define GPIO_AFRL_AFSEL0_0 (0x1U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000001 */ +#define GPIO_AFRL_AFSEL0_1 (0x2U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000002 */ +#define GPIO_AFRL_AFSEL0_2 (0x4U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000004 */ +#define GPIO_AFRL_AFSEL0_3 (0x8U << GPIO_AFRL_AFSEL0_Pos) /*!< 0x00000008 */ +#define GPIO_AFRL_AFSEL1_Pos (4U) +#define GPIO_AFRL_AFSEL1_Msk (0xFUL << GPIO_AFRL_AFSEL1_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRL_AFSEL1 GPIO_AFRL_AFSEL1_Msk +#define GPIO_AFRL_AFSEL1_0 (0x1U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000010 */ +#define GPIO_AFRL_AFSEL1_1 (0x2U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000020 */ +#define GPIO_AFRL_AFSEL1_2 (0x4U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000040 */ +#define GPIO_AFRL_AFSEL1_3 (0x8U << GPIO_AFRL_AFSEL1_Pos) /*!< 0x00000080 */ +#define GPIO_AFRL_AFSEL2_Pos (8U) +#define GPIO_AFRL_AFSEL2_Msk (0xFUL << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRL_AFSEL2 GPIO_AFRL_AFSEL2_Msk +#define GPIO_AFRL_AFSEL2_0 (0x1U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000100 */ +#define GPIO_AFRL_AFSEL2_1 (0x2U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000200 */ +#define GPIO_AFRL_AFSEL2_2 (0x4U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000400 */ +#define GPIO_AFRL_AFSEL2_3 (0x8U << GPIO_AFRL_AFSEL2_Pos) /*!< 0x00000800 */ +#define GPIO_AFRL_AFSEL3_Pos (12U) +#define GPIO_AFRL_AFSEL3_Msk (0xFUL << GPIO_AFRL_AFSEL3_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRL_AFSEL3 GPIO_AFRL_AFSEL3_Msk +#define GPIO_AFRL_AFSEL3_0 (0x1U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00001000 */ +#define GPIO_AFRL_AFSEL3_1 (0x2U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00002000 */ +#define GPIO_AFRL_AFSEL3_2 (0x4U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00004000 */ +#define GPIO_AFRL_AFSEL3_3 (0x8U << GPIO_AFRL_AFSEL3_Pos) /*!< 0x00008000 */ +#define GPIO_AFRL_AFSEL4_Pos (16U) +#define GPIO_AFRL_AFSEL4_Msk (0xFUL << GPIO_AFRL_AFSEL4_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRL_AFSEL4 GPIO_AFRL_AFSEL4_Msk +#define GPIO_AFRL_AFSEL4_0 (0x1U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00010000 */ +#define GPIO_AFRL_AFSEL4_1 (0x2U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00020000 */ +#define GPIO_AFRL_AFSEL4_2 (0x4U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00040000 */ +#define GPIO_AFRL_AFSEL4_3 (0x8U << GPIO_AFRL_AFSEL4_Pos) /*!< 0x00080000 */ +#define GPIO_AFRL_AFSEL5_Pos (20U) +#define GPIO_AFRL_AFSEL5_Msk (0xFUL << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRL_AFSEL5 GPIO_AFRL_AFSEL5_Msk +#define GPIO_AFRL_AFSEL5_0 (0x1U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00100000 */ +#define GPIO_AFRL_AFSEL5_1 (0x2U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00200000 */ +#define GPIO_AFRL_AFSEL5_2 (0x4U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00400000 */ +#define GPIO_AFRL_AFSEL5_3 (0x8U << GPIO_AFRL_AFSEL5_Pos) /*!< 0x00800000 */ +#define GPIO_AFRL_AFSEL6_Pos (24U) +#define GPIO_AFRL_AFSEL6_Msk (0xFUL << GPIO_AFRL_AFSEL6_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRL_AFSEL6 GPIO_AFRL_AFSEL6_Msk +#define GPIO_AFRL_AFSEL6_0 (0x1U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x01000000 */ +#define GPIO_AFRL_AFSEL6_1 (0x2U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x02000000 */ +#define GPIO_AFRL_AFSEL6_2 (0x4U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x04000000 */ +#define GPIO_AFRL_AFSEL6_3 (0x8U << GPIO_AFRL_AFSEL6_Pos) /*!< 0x08000000 */ +#define GPIO_AFRL_AFSEL7_Pos (28U) +#define GPIO_AFRL_AFSEL7_Msk (0xFUL << GPIO_AFRL_AFSEL7_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRL_AFSEL7 GPIO_AFRL_AFSEL7_Msk +#define GPIO_AFRL_AFSEL7_0 (0x1U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x10000000 */ +#define GPIO_AFRL_AFSEL7_1 (0x2U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x20000000 */ +#define GPIO_AFRL_AFSEL7_2 (0x4U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x40000000 */ +#define GPIO_AFRL_AFSEL7_3 (0x8U << GPIO_AFRL_AFSEL7_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for GPIO_AFRH register *********************/ +#define GPIO_AFRH_AFSEL8_Pos (0U) +#define GPIO_AFRH_AFSEL8_Msk (0xFUL << GPIO_AFRH_AFSEL8_Pos) /*!< 0x0000000F */ +#define GPIO_AFRH_AFSEL8 GPIO_AFRH_AFSEL8_Msk +#define GPIO_AFRH_AFSEL8_0 (0x1U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000001 */ +#define GPIO_AFRH_AFSEL8_1 (0x2U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000002 */ +#define GPIO_AFRH_AFSEL8_2 (0x4U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000004 */ +#define GPIO_AFRH_AFSEL8_3 (0x8U << GPIO_AFRH_AFSEL8_Pos) /*!< 0x00000008 */ +#define GPIO_AFRH_AFSEL9_Pos (4U) +#define GPIO_AFRH_AFSEL9_Msk (0xFUL << GPIO_AFRH_AFSEL9_Pos) /*!< 0x000000F0 */ +#define GPIO_AFRH_AFSEL9 GPIO_AFRH_AFSEL9_Msk +#define GPIO_AFRH_AFSEL9_0 (0x1U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000010 */ +#define GPIO_AFRH_AFSEL9_1 (0x2U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000020 */ +#define GPIO_AFRH_AFSEL9_2 (0x4U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000040 */ +#define GPIO_AFRH_AFSEL9_3 (0x8U << GPIO_AFRH_AFSEL9_Pos) /*!< 0x00000080 */ +#define GPIO_AFRH_AFSEL10_Pos (8U) +#define GPIO_AFRH_AFSEL10_Msk (0xFUL << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000F00 */ +#define GPIO_AFRH_AFSEL10 GPIO_AFRH_AFSEL10_Msk +#define GPIO_AFRH_AFSEL10_0 (0x1U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000100 */ +#define GPIO_AFRH_AFSEL10_1 (0x2U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000200 */ +#define GPIO_AFRH_AFSEL10_2 (0x4U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000400 */ +#define GPIO_AFRH_AFSEL10_3 (0x8U << GPIO_AFRH_AFSEL10_Pos) /*!< 0x00000800 */ +#define GPIO_AFRH_AFSEL11_Pos (12U) +#define GPIO_AFRH_AFSEL11_Msk (0xFUL << GPIO_AFRH_AFSEL11_Pos) /*!< 0x0000F000 */ +#define GPIO_AFRH_AFSEL11 GPIO_AFRH_AFSEL11_Msk +#define GPIO_AFRH_AFSEL11_0 (0x1U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00001000 */ +#define GPIO_AFRH_AFSEL11_1 (0x2U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00002000 */ +#define GPIO_AFRH_AFSEL11_2 (0x4U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00004000 */ +#define GPIO_AFRH_AFSEL11_3 (0x8U << GPIO_AFRH_AFSEL11_Pos) /*!< 0x00008000 */ +#define GPIO_AFRH_AFSEL12_Pos (16U) +#define GPIO_AFRH_AFSEL12_Msk (0xFUL << GPIO_AFRH_AFSEL12_Pos) /*!< 0x000F0000 */ +#define GPIO_AFRH_AFSEL12 GPIO_AFRH_AFSEL12_Msk +#define GPIO_AFRH_AFSEL12_0 (0x1U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00010000 */ +#define GPIO_AFRH_AFSEL12_1 (0x2U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00020000 */ +#define GPIO_AFRH_AFSEL12_2 (0x4U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00040000 */ +#define GPIO_AFRH_AFSEL12_3 (0x8U << GPIO_AFRH_AFSEL12_Pos) /*!< 0x00080000 */ +#define GPIO_AFRH_AFSEL13_Pos (20U) +#define GPIO_AFRH_AFSEL13_Msk (0xFUL << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00F00000 */ +#define GPIO_AFRH_AFSEL13 GPIO_AFRH_AFSEL13_Msk +#define GPIO_AFRH_AFSEL13_0 (0x1U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00100000 */ +#define GPIO_AFRH_AFSEL13_1 (0x2U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00200000 */ +#define GPIO_AFRH_AFSEL13_2 (0x4U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00400000 */ +#define GPIO_AFRH_AFSEL13_3 (0x8U << GPIO_AFRH_AFSEL13_Pos) /*!< 0x00800000 */ +#define GPIO_AFRH_AFSEL14_Pos (24U) +#define GPIO_AFRH_AFSEL14_Msk (0xFUL << GPIO_AFRH_AFSEL14_Pos) /*!< 0x0F000000 */ +#define GPIO_AFRH_AFSEL14 GPIO_AFRH_AFSEL14_Msk +#define GPIO_AFRH_AFSEL14_0 (0x1U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x01000000 */ +#define GPIO_AFRH_AFSEL14_1 (0x2U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x02000000 */ +#define GPIO_AFRH_AFSEL14_2 (0x4U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x04000000 */ +#define GPIO_AFRH_AFSEL14_3 (0x8U << GPIO_AFRH_AFSEL14_Pos) /*!< 0x08000000 */ +#define GPIO_AFRH_AFSEL15_Pos (28U) +#define GPIO_AFRH_AFSEL15_Msk (0xFUL << GPIO_AFRH_AFSEL15_Pos) /*!< 0xF0000000 */ +#define GPIO_AFRH_AFSEL15 GPIO_AFRH_AFSEL15_Msk +#define GPIO_AFRH_AFSEL15_0 (0x1U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x10000000 */ +#define GPIO_AFRH_AFSEL15_1 (0x2U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x20000000 */ +#define GPIO_AFRH_AFSEL15_2 (0x4U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x40000000 */ +#define GPIO_AFRH_AFSEL15_3 (0x8U << GPIO_AFRH_AFSEL15_Pos) /*!< 0x80000000 */ + +/****************** Bits definition for GPIO_BRR register ******************/ +#define GPIO_BRR_BR0_Pos (0U) +#define GPIO_BRR_BR0_Msk (0x1UL << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ +#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk +#define GPIO_BRR_BR1_Pos (1U) +#define GPIO_BRR_BR1_Msk (0x1UL << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ +#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk +#define GPIO_BRR_BR2_Pos (2U) +#define GPIO_BRR_BR2_Msk (0x1UL << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ +#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk +#define GPIO_BRR_BR3_Pos (3U) +#define GPIO_BRR_BR3_Msk (0x1UL << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ +#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk +#define GPIO_BRR_BR4_Pos (4U) +#define GPIO_BRR_BR4_Msk (0x1UL << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ +#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk +#define GPIO_BRR_BR5_Pos (5U) +#define GPIO_BRR_BR5_Msk (0x1UL << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ +#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk +#define GPIO_BRR_BR6_Pos (6U) +#define GPIO_BRR_BR6_Msk (0x1UL << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ +#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk +#define GPIO_BRR_BR7_Pos (7U) +#define GPIO_BRR_BR7_Msk (0x1UL << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ +#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk +#define GPIO_BRR_BR8_Pos (8U) +#define GPIO_BRR_BR8_Msk (0x1UL << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ +#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk +#define GPIO_BRR_BR9_Pos (9U) +#define GPIO_BRR_BR9_Msk (0x1UL << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ +#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk +#define GPIO_BRR_BR10_Pos (10U) +#define GPIO_BRR_BR10_Msk (0x1UL << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ +#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk +#define GPIO_BRR_BR11_Pos (11U) +#define GPIO_BRR_BR11_Msk (0x1UL << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ +#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk +#define GPIO_BRR_BR12_Pos (12U) +#define GPIO_BRR_BR12_Msk (0x1UL << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ +#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk +#define GPIO_BRR_BR13_Pos (13U) +#define GPIO_BRR_BR13_Msk (0x1UL << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ +#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk +#define GPIO_BRR_BR14_Pos (14U) +#define GPIO_BRR_BR14_Msk (0x1UL << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ +#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk +#define GPIO_BRR_BR15_Pos (15U) +#define GPIO_BRR_BR15_Msk (0x1UL << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ +#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk + +/******************************************************************************/ +/* */ +/* HSEM HW Semaphore */ +/* */ +/******************************************************************************/ +/******************** Bit definition for HSEM_R register ********************/ +#define HSEM_R_PROCID_Pos (0U) +#define HSEM_R_PROCID_Msk (0xFFUL << HSEM_R_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_R_PROCID HSEM_R_PROCID_Msk /*!<Semaphore ProcessID */ +#define HSEM_R_COREID_Pos (8U) +#define HSEM_R_COREID_Msk (0xFUL << HSEM_R_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_R_COREID HSEM_R_COREID_Msk /*!<Semaphore CoreID. */ +#define HSEM_R_LOCK_Pos (31U) +#define HSEM_R_LOCK_Msk (0x1UL << HSEM_R_LOCK_Pos) /*!< 0x80000000 */ +#define HSEM_R_LOCK HSEM_R_LOCK_Msk /*!<Lock indication. */ + +/******************** Bit definition for HSEM_RLR register ******************/ +#define HSEM_RLR_PROCID_Pos (0U) +#define HSEM_RLR_PROCID_Msk (0xFFUL << HSEM_RLR_PROCID_Pos) /*!< 0x000000FF */ +#define HSEM_RLR_PROCID HSEM_RLR_PROCID_Msk /*!<Semaphore ProcessID */ +#define HSEM_RLR_COREID_Pos (8U) +#define HSEM_RLR_COREID_Msk (0xFUL << HSEM_RLR_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_RLR_COREID HSEM_RLR_COREID_Msk /*!<Semaphore CoreID. */ +#define HSEM_RLR_LOCK_Pos (31U) +#define HSEM_RLR_LOCK_Msk (0x1UL << HSEM_RLR_LOCK_Pos) /*!< 0x80000000 */ +#define HSEM_RLR_LOCK HSEM_RLR_LOCK_Msk /*!<Lock indication. */ + +/******************** Bit definition for HSEM_C1IER register ****************/ +#define HSEM_C1IER_ISE0_Pos (0U) +#define HSEM_C1IER_ISE0_Msk (0x1UL << HSEM_C1IER_ISE0_Pos) /*!< 0x00000001 */ +#define HSEM_C1IER_ISE0 HSEM_C1IER_ISE0_Msk /*!<semaphore 0 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE1_Pos (1U) +#define HSEM_C1IER_ISE1_Msk (0x1UL << HSEM_C1IER_ISE1_Pos) /*!< 0x00000002 */ +#define HSEM_C1IER_ISE1 HSEM_C1IER_ISE1_Msk /*!<semaphore 1 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE2_Pos (2U) +#define HSEM_C1IER_ISE2_Msk (0x1UL << HSEM_C1IER_ISE2_Pos) /*!< 0x00000004 */ +#define HSEM_C1IER_ISE2 HSEM_C1IER_ISE2_Msk /*!<semaphore 2 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE3_Pos (3U) +#define HSEM_C1IER_ISE3_Msk (0x1UL << HSEM_C1IER_ISE3_Pos) /*!< 0x00000008 */ +#define HSEM_C1IER_ISE3 HSEM_C1IER_ISE3_Msk /*!<semaphore 3 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE4_Pos (4U) +#define HSEM_C1IER_ISE4_Msk (0x1UL << HSEM_C1IER_ISE4_Pos) /*!< 0x00000010 */ +#define HSEM_C1IER_ISE4 HSEM_C1IER_ISE4_Msk /*!<semaphore 4 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE5_Pos (5U) +#define HSEM_C1IER_ISE5_Msk (0x1UL << HSEM_C1IER_ISE5_Pos) /*!< 0x00000020 */ +#define HSEM_C1IER_ISE5 HSEM_C1IER_ISE5_Msk /*!<semaphore 5 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE6_Pos (6U) +#define HSEM_C1IER_ISE6_Msk (0x1UL << HSEM_C1IER_ISE6_Pos) /*!< 0x00000040 */ +#define HSEM_C1IER_ISE6 HSEM_C1IER_ISE6_Msk /*!<semaphore 6 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE7_Pos (7U) +#define HSEM_C1IER_ISE7_Msk (0x1UL << HSEM_C1IER_ISE7_Pos) /*!< 0x00000080 */ +#define HSEM_C1IER_ISE7 HSEM_C1IER_ISE7_Msk /*!<semaphore 7 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE8_Pos (8U) +#define HSEM_C1IER_ISE8_Msk (0x1UL << HSEM_C1IER_ISE8_Pos) /*!< 0x00000100 */ +#define HSEM_C1IER_ISE8 HSEM_C1IER_ISE8_Msk /*!<semaphore 8 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE9_Pos (9U) +#define HSEM_C1IER_ISE9_Msk (0x1UL << HSEM_C1IER_ISE9_Pos) /*!< 0x00000200 */ +#define HSEM_C1IER_ISE9 HSEM_C1IER_ISE9_Msk /*!<semaphore 9 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE10_Pos (10U) +#define HSEM_C1IER_ISE10_Msk (0x1UL << HSEM_C1IER_ISE10_Pos) /*!< 0x00000400 */ +#define HSEM_C1IER_ISE10 HSEM_C1IER_ISE10_Msk /*!<semaphore 10 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE11_Pos (11U) +#define HSEM_C1IER_ISE11_Msk (0x1UL << HSEM_C1IER_ISE11_Pos) /*!< 0x00000800 */ +#define HSEM_C1IER_ISE11 HSEM_C1IER_ISE11_Msk /*!<semaphore 11 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE12_Pos (12U) +#define HSEM_C1IER_ISE12_Msk (0x1UL << HSEM_C1IER_ISE12_Pos) /*!< 0x00001000 */ +#define HSEM_C1IER_ISE12 HSEM_C1IER_ISE12_Msk /*!<semaphore 12 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE13_Pos (13U) +#define HSEM_C1IER_ISE13_Msk (0x1UL << HSEM_C1IER_ISE13_Pos) /*!< 0x00002000 */ +#define HSEM_C1IER_ISE13 HSEM_C1IER_ISE13_Msk /*!<semaphore 13 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE14_Pos (14U) +#define HSEM_C1IER_ISE14_Msk (0x1UL << HSEM_C1IER_ISE14_Pos) /*!< 0x00004000 */ +#define HSEM_C1IER_ISE14 HSEM_C1IER_ISE14_Msk /*!<semaphore 14 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE15_Pos (15U) +#define HSEM_C1IER_ISE15_Msk (0x1UL << HSEM_C1IER_ISE15_Pos) /*!< 0x00008000 */ +#define HSEM_C1IER_ISE15 HSEM_C1IER_ISE15_Msk /*!<semaphore 15 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE16_Pos (16U) +#define HSEM_C1IER_ISE16_Msk (0x1UL << HSEM_C1IER_ISE16_Pos) /*!< 0x00010000 */ +#define HSEM_C1IER_ISE16 HSEM_C1IER_ISE16_Msk /*!<semaphore 16 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE17_Pos (17U) +#define HSEM_C1IER_ISE17_Msk (0x1UL << HSEM_C1IER_ISE17_Pos) /*!< 0x00020000 */ +#define HSEM_C1IER_ISE17 HSEM_C1IER_ISE17_Msk /*!<semaphore 17 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE18_Pos (18U) +#define HSEM_C1IER_ISE18_Msk (0x1UL << HSEM_C1IER_ISE18_Pos) /*!< 0x00040000 */ +#define HSEM_C1IER_ISE18 HSEM_C1IER_ISE18_Msk /*!<semaphore 18 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE19_Pos (19U) +#define HSEM_C1IER_ISE19_Msk (0x1UL << HSEM_C1IER_ISE19_Pos) /*!< 0x00080000 */ +#define HSEM_C1IER_ISE19 HSEM_C1IER_ISE19_Msk /*!<semaphore 19 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE20_Pos (20U) +#define HSEM_C1IER_ISE20_Msk (0x1UL << HSEM_C1IER_ISE20_Pos) /*!< 0x00100000 */ +#define HSEM_C1IER_ISE20 HSEM_C1IER_ISE20_Msk /*!<semaphore 20 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE21_Pos (21U) +#define HSEM_C1IER_ISE21_Msk (0x1UL << HSEM_C1IER_ISE21_Pos) /*!< 0x00200000 */ +#define HSEM_C1IER_ISE21 HSEM_C1IER_ISE21_Msk /*!<semaphore 21 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE22_Pos (22U) +#define HSEM_C1IER_ISE22_Msk (0x1UL << HSEM_C1IER_ISE22_Pos) /*!< 0x00400000 */ +#define HSEM_C1IER_ISE22 HSEM_C1IER_ISE22_Msk /*!<semaphore 22 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE23_Pos (23U) +#define HSEM_C1IER_ISE23_Msk (0x1UL << HSEM_C1IER_ISE23_Pos) /*!< 0x00800000 */ +#define HSEM_C1IER_ISE23 HSEM_C1IER_ISE23_Msk /*!<semaphore 23 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE24_Pos (24U) +#define HSEM_C1IER_ISE24_Msk (0x1UL << HSEM_C1IER_ISE24_Pos) /*!< 0x01000000 */ +#define HSEM_C1IER_ISE24 HSEM_C1IER_ISE24_Msk /*!<semaphore 24 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE25_Pos (25U) +#define HSEM_C1IER_ISE25_Msk (0x1UL << HSEM_C1IER_ISE25_Pos) /*!< 0x02000000 */ +#define HSEM_C1IER_ISE25 HSEM_C1IER_ISE25_Msk /*!<semaphore 25 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE26_Pos (26U) +#define HSEM_C1IER_ISE26_Msk (0x1UL << HSEM_C1IER_ISE26_Pos) /*!< 0x04000000 */ +#define HSEM_C1IER_ISE26 HSEM_C1IER_ISE26_Msk /*!<semaphore 26 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE27_Pos (27U) +#define HSEM_C1IER_ISE27_Msk (0x1UL << HSEM_C1IER_ISE27_Pos) /*!< 0x08000000 */ +#define HSEM_C1IER_ISE27 HSEM_C1IER_ISE27_Msk /*!<semaphore 27 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE28_Pos (28U) +#define HSEM_C1IER_ISE28_Msk (0x1UL << HSEM_C1IER_ISE28_Pos) /*!< 0x10000000 */ +#define HSEM_C1IER_ISE28 HSEM_C1IER_ISE28_Msk /*!<semaphore 28 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE29_Pos (29U) +#define HSEM_C1IER_ISE29_Msk (0x1UL << HSEM_C1IER_ISE29_Pos) /*!< 0x20000000 */ +#define HSEM_C1IER_ISE29 HSEM_C1IER_ISE29_Msk /*!<semaphore 29 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE30_Pos (30U) +#define HSEM_C1IER_ISE30_Msk (0x1UL << HSEM_C1IER_ISE30_Pos) /*!< 0x40000000 */ +#define HSEM_C1IER_ISE30 HSEM_C1IER_ISE30_Msk /*!<semaphore 30 CPU1 interrupt enable bit. */ +#define HSEM_C1IER_ISE31_Pos (31U) +#define HSEM_C1IER_ISE31_Msk (0x1UL << HSEM_C1IER_ISE31_Pos) /*!< 0x80000000 */ +#define HSEM_C1IER_ISE31 HSEM_C1IER_ISE31_Msk /*!<semaphore 31 CPU1 interrupt enable bit. */ + +/******************** Bit definition for HSEM_C1ICR register *****************/ +#define HSEM_C1ICR_ISC0_Pos (0U) +#define HSEM_C1ICR_ISC0_Msk (0x1UL << HSEM_C1ICR_ISC0_Pos) /*!< 0x00000001 */ +#define HSEM_C1ICR_ISC0 HSEM_C1ICR_ISC0_Msk /*!<semaphore 0 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC1_Pos (1U) +#define HSEM_C1ICR_ISC1_Msk (0x1UL << HSEM_C1ICR_ISC1_Pos) /*!< 0x00000002 */ +#define HSEM_C1ICR_ISC1 HSEM_C1ICR_ISC1_Msk /*!<semaphore 1 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC2_Pos (2U) +#define HSEM_C1ICR_ISC2_Msk (0x1UL << HSEM_C1ICR_ISC2_Pos) /*!< 0x00000004 */ +#define HSEM_C1ICR_ISC2 HSEM_C1ICR_ISC2_Msk /*!<semaphore 2 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC3_Pos (3U) +#define HSEM_C1ICR_ISC3_Msk (0x1UL << HSEM_C1ICR_ISC3_Pos) /*!< 0x00000008 */ +#define HSEM_C1ICR_ISC3 HSEM_C1ICR_ISC3_Msk /*!<semaphore 3 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC4_Pos (4U) +#define HSEM_C1ICR_ISC4_Msk (0x1UL << HSEM_C1ICR_ISC4_Pos) /*!< 0x00000010 */ +#define HSEM_C1ICR_ISC4 HSEM_C1ICR_ISC4_Msk /*!<semaphore 4 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC5_Pos (5U) +#define HSEM_C1ICR_ISC5_Msk (0x1UL << HSEM_C1ICR_ISC5_Pos) /*!< 0x00000020 */ +#define HSEM_C1ICR_ISC5 HSEM_C1ICR_ISC5_Msk /*!<semaphore 5 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC6_Pos (6U) +#define HSEM_C1ICR_ISC6_Msk (0x1UL << HSEM_C1ICR_ISC6_Pos) /*!< 0x00000040 */ +#define HSEM_C1ICR_ISC6 HSEM_C1ICR_ISC6_Msk /*!<semaphore 6 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC7_Pos (7U) +#define HSEM_C1ICR_ISC7_Msk (0x1UL << HSEM_C1ICR_ISC7_Pos) /*!< 0x00000080 */ +#define HSEM_C1ICR_ISC7 HSEM_C1ICR_ISC7_Msk /*!<semaphore 7 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC8_Pos (8U) +#define HSEM_C1ICR_ISC8_Msk (0x1UL << HSEM_C1ICR_ISC8_Pos) /*!< 0x00000100 */ +#define HSEM_C1ICR_ISC8 HSEM_C1ICR_ISC8_Msk /*!<semaphore 8 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC9_Pos (9U) +#define HSEM_C1ICR_ISC9_Msk (0x1UL << HSEM_C1ICR_ISC9_Pos) /*!< 0x00000200 */ +#define HSEM_C1ICR_ISC9 HSEM_C1ICR_ISC9_Msk /*!<semaphore 9 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC10_Pos (10U) +#define HSEM_C1ICR_ISC10_Msk (0x1UL << HSEM_C1ICR_ISC10_Pos) /*!< 0x00000400 */ +#define HSEM_C1ICR_ISC10 HSEM_C1ICR_ISC10_Msk /*!<semaphore 10 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC11_Pos (11U) +#define HSEM_C1ICR_ISC11_Msk (0x1UL << HSEM_C1ICR_ISC11_Pos) /*!< 0x00000800 */ +#define HSEM_C1ICR_ISC11 HSEM_C1ICR_ISC11_Msk /*!<semaphore 11 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC12_Pos (12U) +#define HSEM_C1ICR_ISC12_Msk (0x1UL << HSEM_C1ICR_ISC12_Pos) /*!< 0x00001000 */ +#define HSEM_C1ICR_ISC12 HSEM_C1ICR_ISC12_Msk /*!<semaphore 12 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC13_Pos (13U) +#define HSEM_C1ICR_ISC13_Msk (0x1UL << HSEM_C1ICR_ISC13_Pos) /*!< 0x00002000 */ +#define HSEM_C1ICR_ISC13 HSEM_C1ICR_ISC13_Msk /*!<semaphore 13 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC14_Pos (14U) +#define HSEM_C1ICR_ISC14_Msk (0x1UL << HSEM_C1ICR_ISC14_Pos) /*!< 0x00004000 */ +#define HSEM_C1ICR_ISC14 HSEM_C1ICR_ISC14_Msk /*!<semaphore 14 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC15_Pos (15U) +#define HSEM_C1ICR_ISC15_Msk (0x1UL << HSEM_C1ICR_ISC15_Pos) /*!< 0x00008000 */ +#define HSEM_C1ICR_ISC15 HSEM_C1ICR_ISC15_Msk /*!<semaphore 15 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC16_Pos (16U) +#define HSEM_C1ICR_ISC16_Msk (0x1UL << HSEM_C1ICR_ISC16_Pos) /*!< 0x00010000 */ +#define HSEM_C1ICR_ISC16 HSEM_C1ICR_ISC16_Msk /*!<semaphore 16 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC17_Pos (17U) +#define HSEM_C1ICR_ISC17_Msk (0x1UL << HSEM_C1ICR_ISC17_Pos) /*!< 0x00020000 */ +#define HSEM_C1ICR_ISC17 HSEM_C1ICR_ISC17_Msk /*!<semaphore 17 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC18_Pos (18U) +#define HSEM_C1ICR_ISC18_Msk (0x1UL << HSEM_C1ICR_ISC18_Pos) /*!< 0x00040000 */ +#define HSEM_C1ICR_ISC18 HSEM_C1ICR_ISC18_Msk /*!<semaphore 18 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC19_Pos (19U) +#define HSEM_C1ICR_ISC19_Msk (0x1UL << HSEM_C1ICR_ISC19_Pos) /*!< 0x00080000 */ +#define HSEM_C1ICR_ISC19 HSEM_C1ICR_ISC19_Msk /*!<semaphore 19 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC20_Pos (20U) +#define HSEM_C1ICR_ISC20_Msk (0x1UL << HSEM_C1ICR_ISC20_Pos) /*!< 0x00100000 */ +#define HSEM_C1ICR_ISC20 HSEM_C1ICR_ISC20_Msk /*!<semaphore 20 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC21_Pos (21U) +#define HSEM_C1ICR_ISC21_Msk (0x1UL << HSEM_C1ICR_ISC21_Pos) /*!< 0x00200000 */ +#define HSEM_C1ICR_ISC21 HSEM_C1ICR_ISC21_Msk /*!<semaphore 21 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC22_Pos (22U) +#define HSEM_C1ICR_ISC22_Msk (0x1UL << HSEM_C1ICR_ISC22_Pos) /*!< 0x00400000 */ +#define HSEM_C1ICR_ISC22 HSEM_C1ICR_ISC22_Msk /*!<semaphore 22 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC23_Pos (23U) +#define HSEM_C1ICR_ISC23_Msk (0x1UL << HSEM_C1ICR_ISC23_Pos) /*!< 0x00800000 */ +#define HSEM_C1ICR_ISC23 HSEM_C1ICR_ISC23_Msk /*!<semaphore 23 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC24_Pos (24U) +#define HSEM_C1ICR_ISC24_Msk (0x1UL << HSEM_C1ICR_ISC24_Pos) /*!< 0x01000000 */ +#define HSEM_C1ICR_ISC24 HSEM_C1ICR_ISC24_Msk /*!<semaphore 24 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC25_Pos (25U) +#define HSEM_C1ICR_ISC25_Msk (0x1UL << HSEM_C1ICR_ISC25_Pos) /*!< 0x02000000 */ +#define HSEM_C1ICR_ISC25 HSEM_C1ICR_ISC25_Msk /*!<semaphore 25 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC26_Pos (26U) +#define HSEM_C1ICR_ISC26_Msk (0x1UL << HSEM_C1ICR_ISC26_Pos) /*!< 0x04000000 */ +#define HSEM_C1ICR_ISC26 HSEM_C1ICR_ISC26_Msk /*!<semaphore 26 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC27_Pos (27U) +#define HSEM_C1ICR_ISC27_Msk (0x1UL << HSEM_C1ICR_ISC27_Pos) /*!< 0x08000000 */ +#define HSEM_C1ICR_ISC27 HSEM_C1ICR_ISC27_Msk /*!<semaphore 27 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC28_Pos (28U) +#define HSEM_C1ICR_ISC28_Msk (0x1UL << HSEM_C1ICR_ISC28_Pos) /*!< 0x10000000 */ +#define HSEM_C1ICR_ISC28 HSEM_C1ICR_ISC28_Msk /*!<semaphore 28 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC29_Pos (29U) +#define HSEM_C1ICR_ISC29_Msk (0x1UL << HSEM_C1ICR_ISC29_Pos) /*!< 0x20000000 */ +#define HSEM_C1ICR_ISC29 HSEM_C1ICR_ISC29_Msk /*!<semaphore 29 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC30_Pos (30U) +#define HSEM_C1ICR_ISC30_Msk (0x1UL << HSEM_C1ICR_ISC30_Pos) /*!< 0x40000000 */ +#define HSEM_C1ICR_ISC30 HSEM_C1ICR_ISC30_Msk /*!<semaphore 30 CPU1 interrupt clear bit. */ +#define HSEM_C1ICR_ISC31_Pos (31U) +#define HSEM_C1ICR_ISC31_Msk (0x1UL << HSEM_C1ICR_ISC31_Pos) /*!< 0x80000000 */ +#define HSEM_C1ICR_ISC31 HSEM_C1ICR_ISC31_Msk /*!<semaphore 31 CPU1 interrupt clear bit. */ + +/******************** Bit definition for HSEM_C1ISR register *****************/ +#define HSEM_C1ISR_ISF0_Pos (0U) +#define HSEM_C1ISR_ISF0_Msk (0x1UL << HSEM_C1ISR_ISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C1ISR_ISF0 HSEM_C1ISR_ISF0_Msk /*!<semaphore 0 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF1_Pos (1U) +#define HSEM_C1ISR_ISF1_Msk (0x1UL << HSEM_C1ISR_ISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C1ISR_ISF1 HSEM_C1ISR_ISF1_Msk /*!<semaphore 1 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF2_Pos (2U) +#define HSEM_C1ISR_ISF2_Msk (0x1UL << HSEM_C1ISR_ISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C1ISR_ISF2 HSEM_C1ISR_ISF2_Msk /*!<semaphore 2 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF3_Pos (3U) +#define HSEM_C1ISR_ISF3_Msk (0x1UL << HSEM_C1ISR_ISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C1ISR_ISF3 HSEM_C1ISR_ISF3_Msk /*!<semaphore 3 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF4_Pos (4U) +#define HSEM_C1ISR_ISF4_Msk (0x1UL << HSEM_C1ISR_ISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C1ISR_ISF4 HSEM_C1ISR_ISF4_Msk /*!<semaphore 4 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF5_Pos (5U) +#define HSEM_C1ISR_ISF5_Msk (0x1UL << HSEM_C1ISR_ISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C1ISR_ISF5 HSEM_C1ISR_ISF5_Msk /*!<semaphore 5 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF6_Pos (6U) +#define HSEM_C1ISR_ISF6_Msk (0x1UL << HSEM_C1ISR_ISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C1ISR_ISF6 HSEM_C1ISR_ISF6_Msk /*!<semaphore 6 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF7_Pos (7U) +#define HSEM_C1ISR_ISF7_Msk (0x1UL << HSEM_C1ISR_ISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C1ISR_ISF7 HSEM_C1ISR_ISF7_Msk /*!<semaphore 7 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF8_Pos (8U) +#define HSEM_C1ISR_ISF8_Msk (0x1UL << HSEM_C1ISR_ISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C1ISR_ISF8 HSEM_C1ISR_ISF8_Msk /*!<semaphore 8 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF9_Pos (9U) +#define HSEM_C1ISR_ISF9_Msk (0x1UL << HSEM_C1ISR_ISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C1ISR_ISF9 HSEM_C1ISR_ISF9_Msk /*!<semaphore 9 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF10_Pos (10U) +#define HSEM_C1ISR_ISF10_Msk (0x1UL << HSEM_C1ISR_ISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C1ISR_ISF10 HSEM_C1ISR_ISF10_Msk /*!<semaphore 10 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF11_Pos (11U) +#define HSEM_C1ISR_ISF11_Msk (0x1UL << HSEM_C1ISR_ISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C1ISR_ISF11 HSEM_C1ISR_ISF11_Msk /*!<semaphore 11 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF12_Pos (12U) +#define HSEM_C1ISR_ISF12_Msk (0x1UL << HSEM_C1ISR_ISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C1ISR_ISF12 HSEM_C1ISR_ISF12_Msk /*!<semaphore 12 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF13_Pos (13U) +#define HSEM_C1ISR_ISF13_Msk (0x1UL << HSEM_C1ISR_ISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C1ISR_ISF13 HSEM_C1ISR_ISF13_Msk /*!<semaphore 13 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF14_Pos (14U) +#define HSEM_C1ISR_ISF14_Msk (0x1UL << HSEM_C1ISR_ISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C1ISR_ISF14 HSEM_C1ISR_ISF14_Msk /*!<semaphore 14 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF15_Pos (15U) +#define HSEM_C1ISR_ISF15_Msk (0x1UL << HSEM_C1ISR_ISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C1ISR_ISF15 HSEM_C1ISR_ISF15_Msk /*!<semaphore 15 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF16_Pos (16U) +#define HSEM_C1ISR_ISF16_Msk (0x1UL << HSEM_C1ISR_ISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C1ISR_ISF16 HSEM_C1ISR_ISF16_Msk /*!<semaphore 16 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF17_Pos (17U) +#define HSEM_C1ISR_ISF17_Msk (0x1UL << HSEM_C1ISR_ISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C1ISR_ISF17 HSEM_C1ISR_ISF17_Msk /*!<semaphore 17 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF18_Pos (18U) +#define HSEM_C1ISR_ISF18_Msk (0x1UL << HSEM_C1ISR_ISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C1ISR_ISF18 HSEM_C1ISR_ISF18_Msk /*!<semaphore 18 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF19_Pos (19U) +#define HSEM_C1ISR_ISF19_Msk (0x1UL << HSEM_C1ISR_ISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C1ISR_ISF19 HSEM_C1ISR_ISF19_Msk /*!<semaphore 19 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF20_Pos (20U) +#define HSEM_C1ISR_ISF20_Msk (0x1UL << HSEM_C1ISR_ISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C1ISR_ISF20 HSEM_C1ISR_ISF20_Msk /*!<semaphore 20 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF21_Pos (21U) +#define HSEM_C1ISR_ISF21_Msk (0x1UL << HSEM_C1ISR_ISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C1ISR_ISF21 HSEM_C1ISR_ISF21_Msk /*!<semaphore 21 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF22_Pos (22U) +#define HSEM_C1ISR_ISF22_Msk (0x1UL << HSEM_C1ISR_ISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C1ISR_ISF22 HSEM_C1ISR_ISF22_Msk /*!<semaphore 22 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF23_Pos (23U) +#define HSEM_C1ISR_ISF23_Msk (0x1UL << HSEM_C1ISR_ISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C1ISR_ISF23 HSEM_C1ISR_ISF23_Msk /*!<semaphore 23 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF24_Pos (24U) +#define HSEM_C1ISR_ISF24_Msk (0x1UL << HSEM_C1ISR_ISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C1ISR_ISF24 HSEM_C1ISR_ISF24_Msk /*!<semaphore 24 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF25_Pos (25U) +#define HSEM_C1ISR_ISF25_Msk (0x1UL << HSEM_C1ISR_ISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C1ISR_ISF25 HSEM_C1ISR_ISF25_Msk /*!<semaphore 25 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF26_Pos (26U) +#define HSEM_C1ISR_ISF26_Msk (0x1UL << HSEM_C1ISR_ISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C1ISR_ISF26 HSEM_C1ISR_ISF26_Msk /*!<semaphore 26 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF27_Pos (27U) +#define HSEM_C1ISR_ISF27_Msk (0x1UL << HSEM_C1ISR_ISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C1ISR_ISF27 HSEM_C1ISR_ISF27_Msk /*!<semaphore 27 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF28_Pos (28U) +#define HSEM_C1ISR_ISF28_Msk (0x1UL << HSEM_C1ISR_ISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C1ISR_ISF28 HSEM_C1ISR_ISF28_Msk /*!<semaphore 28 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF29_Pos (29U) +#define HSEM_C1ISR_ISF29_Msk (0x1UL << HSEM_C1ISR_ISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C1ISR_ISF29 HSEM_C1ISR_ISF29_Msk /*!<semaphore 29 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF30_Pos (30U) +#define HSEM_C1ISR_ISF30_Msk (0x1UL << HSEM_C1ISR_ISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C1ISR_ISF30 HSEM_C1ISR_ISF30_Msk /*!<semaphore 30 CPU1 interrupt status bit. */ +#define HSEM_C1ISR_ISF31_Pos (31U) +#define HSEM_C1ISR_ISF31_Msk (0x1UL << HSEM_C1ISR_ISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C1ISR_ISF31 HSEM_C1ISR_ISF31_Msk /*!<semaphore 31 CPU1 interrupt status bit. */ + +/******************** Bit definition for HSEM_C1MISR register *****************/ +#define HSEM_C1MISR_MISF0_Pos (0U) +#define HSEM_C1MISR_MISF0_Msk (0x1UL << HSEM_C1MISR_MISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C1MISR_MISF0 HSEM_C1MISR_MISF0_Msk /*!<semaphore 0 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF1_Pos (1U) +#define HSEM_C1MISR_MISF1_Msk (0x1UL << HSEM_C1MISR_MISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C1MISR_MISF1 HSEM_C1MISR_MISF1_Msk /*!<semaphore 1 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF2_Pos (2U) +#define HSEM_C1MISR_MISF2_Msk (0x1UL << HSEM_C1MISR_MISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C1MISR_MISF2 HSEM_C1MISR_MISF2_Msk /*!<semaphore 2 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF3_Pos (3U) +#define HSEM_C1MISR_MISF3_Msk (0x1UL << HSEM_C1MISR_MISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C1MISR_MISF3 HSEM_C1MISR_MISF3_Msk /*!<semaphore 3 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF4_Pos (4U) +#define HSEM_C1MISR_MISF4_Msk (0x1UL << HSEM_C1MISR_MISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C1MISR_MISF4 HSEM_C1MISR_MISF4_Msk /*!<semaphore 4 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF5_Pos (5U) +#define HSEM_C1MISR_MISF5_Msk (0x1UL << HSEM_C1MISR_MISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C1MISR_MISF5 HSEM_C1MISR_MISF5_Msk /*!<semaphore 5 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF6_Pos (6U) +#define HSEM_C1MISR_MISF6_Msk (0x1UL << HSEM_C1MISR_MISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C1MISR_MISF6 HSEM_C1MISR_MISF6_Msk /*!<semaphore 6 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF7_Pos (7U) +#define HSEM_C1MISR_MISF7_Msk (0x1UL << HSEM_C1MISR_MISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C1MISR_MISF7 HSEM_C1MISR_MISF7_Msk /*!<semaphore 7 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF8_Pos (8U) +#define HSEM_C1MISR_MISF8_Msk (0x1UL << HSEM_C1MISR_MISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C1MISR_MISF8 HSEM_C1MISR_MISF8_Msk /*!<semaphore 8 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF9_Pos (9U) +#define HSEM_C1MISR_MISF9_Msk (0x1UL << HSEM_C1MISR_MISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C1MISR_MISF9 HSEM_C1MISR_MISF9_Msk /*!<semaphore 9 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF10_Pos (10U) +#define HSEM_C1MISR_MISF10_Msk (0x1UL << HSEM_C1MISR_MISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C1MISR_MISF10 HSEM_C1MISR_MISF10_Msk /*!<semaphore 10 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF11_Pos (11U) +#define HSEM_C1MISR_MISF11_Msk (0x1UL << HSEM_C1MISR_MISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C1MISR_MISF11 HSEM_C1MISR_MISF11_Msk /*!<semaphore 11 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF12_Pos (12U) +#define HSEM_C1MISR_MISF12_Msk (0x1UL << HSEM_C1MISR_MISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C1MISR_MISF12 HSEM_C1MISR_MISF12_Msk /*!<semaphore 12 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF13_Pos (13U) +#define HSEM_C1MISR_MISF13_Msk (0x1UL << HSEM_C1MISR_MISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C1MISR_MISF13 HSEM_C1MISR_MISF13_Msk /*!<semaphore 13 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF14_Pos (14U) +#define HSEM_C1MISR_MISF14_Msk (0x1UL << HSEM_C1MISR_MISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C1MISR_MISF14 HSEM_C1MISR_MISF14_Msk /*!<semaphore 14 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF15_Pos (15U) +#define HSEM_C1MISR_MISF15_Msk (0x1UL << HSEM_C1MISR_MISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C1MISR_MISF15 HSEM_C1MISR_MISF15_Msk /*!<semaphore 15 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF16_Pos (16U) +#define HSEM_C1MISR_MISF16_Msk (0x1UL << HSEM_C1MISR_MISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C1MISR_MISF16 HSEM_C1MISR_MISF16_Msk /*!<semaphore 16 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF17_Pos (17U) +#define HSEM_C1MISR_MISF17_Msk (0x1UL << HSEM_C1MISR_MISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C1MISR_MISF17 HSEM_C1MISR_MISF17_Msk /*!<semaphore 17 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF18_Pos (18U) +#define HSEM_C1MISR_MISF18_Msk (0x1UL << HSEM_C1MISR_MISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C1MISR_MISF18 HSEM_C1MISR_MISF18_Msk /*!<semaphore 18 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF19_Pos (19U) +#define HSEM_C1MISR_MISF19_Msk (0x1UL << HSEM_C1MISR_MISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C1MISR_MISF19 HSEM_C1MISR_MISF19_Msk /*!<semaphore 19 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF20_Pos (20U) +#define HSEM_C1MISR_MISF20_Msk (0x1UL << HSEM_C1MISR_MISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C1MISR_MISF20 HSEM_C1MISR_MISF20_Msk /*!<semaphore 20 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF21_Pos (21U) +#define HSEM_C1MISR_MISF21_Msk (0x1UL << HSEM_C1MISR_MISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C1MISR_MISF21 HSEM_C1MISR_MISF21_Msk /*!<semaphore 21 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF22_Pos (22U) +#define HSEM_C1MISR_MISF22_Msk (0x1UL << HSEM_C1MISR_MISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C1MISR_MISF22 HSEM_C1MISR_MISF22_Msk /*!<semaphore 22 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF23_Pos (23U) +#define HSEM_C1MISR_MISF23_Msk (0x1UL << HSEM_C1MISR_MISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C1MISR_MISF23 HSEM_C1MISR_MISF23_Msk /*!<semaphore 23 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF24_Pos (24U) +#define HSEM_C1MISR_MISF24_Msk (0x1UL << HSEM_C1MISR_MISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C1MISR_MISF24 HSEM_C1MISR_MISF24_Msk /*!<semaphore 24 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF25_Pos (25U) +#define HSEM_C1MISR_MISF25_Msk (0x1UL << HSEM_C1MISR_MISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C1MISR_MISF25 HSEM_C1MISR_MISF25_Msk /*!<semaphore 25 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF26_Pos (26U) +#define HSEM_C1MISR_MISF26_Msk (0x1UL << HSEM_C1MISR_MISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C1MISR_MISF26 HSEM_C1MISR_MISF26_Msk /*!<semaphore 26 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF27_Pos (27U) +#define HSEM_C1MISR_MISF27_Msk (0x1UL << HSEM_C1MISR_MISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C1MISR_MISF27 HSEM_C1MISR_MISF27_Msk /*!<semaphore 27 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF28_Pos (28U) +#define HSEM_C1MISR_MISF28_Msk (0x1UL << HSEM_C1MISR_MISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C1MISR_MISF28 HSEM_C1MISR_MISF28_Msk /*!<semaphore 28 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF29_Pos (29U) +#define HSEM_C1MISR_MISF29_Msk (0x1UL << HSEM_C1MISR_MISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C1MISR_MISF29 HSEM_C1MISR_MISF29_Msk /*!<semaphore 29 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF30_Pos (30U) +#define HSEM_C1MISR_MISF30_Msk (0x1UL << HSEM_C1MISR_MISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C1MISR_MISF30 HSEM_C1MISR_MISF30_Msk /*!<semaphore 30 CPU1 interrupt masked status bit. */ +#define HSEM_C1MISR_MISF31_Pos (31U) +#define HSEM_C1MISR_MISF31_Msk (0x1UL << HSEM_C1MISR_MISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C1MISR_MISF31 HSEM_C1MISR_MISF31_Msk /*!<semaphore 31 CPU1 interrupt masked status bit. */ + +/******************** Bit definition for HSEM_C2IER register *****************/ +#define HSEM_C2IER_ISE0_Pos (0U) +#define HSEM_C2IER_ISE0_Msk (0x1UL << HSEM_C2IER_ISE0_Pos) /*!< 0x00000001 */ +#define HSEM_C2IER_ISE0 HSEM_C2IER_ISE0_Msk /*!<semaphore 0 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE1_Pos (1U) +#define HSEM_C2IER_ISE1_Msk (0x1UL << HSEM_C2IER_ISE1_Pos) /*!< 0x00000002 */ +#define HSEM_C2IER_ISE1 HSEM_C2IER_ISE1_Msk /*!<semaphore 1 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE2_Pos (2U) +#define HSEM_C2IER_ISE2_Msk (0x1UL << HSEM_C2IER_ISE2_Pos) /*!< 0x00000004 */ +#define HSEM_C2IER_ISE2 HSEM_C2IER_ISE2_Msk /*!<semaphore 2 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE3_Pos (3U) +#define HSEM_C2IER_ISE3_Msk (0x1UL << HSEM_C2IER_ISE3_Pos) /*!< 0x00000008 */ +#define HSEM_C2IER_ISE3 HSEM_C2IER_ISE3_Msk /*!<semaphore 3 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE4_Pos (4U) +#define HSEM_C2IER_ISE4_Msk (0x1UL << HSEM_C2IER_ISE4_Pos) /*!< 0x00000010 */ +#define HSEM_C2IER_ISE4 HSEM_C2IER_ISE4_Msk /*!<semaphore 4 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE5_Pos (5U) +#define HSEM_C2IER_ISE5_Msk (0x1UL << HSEM_C2IER_ISE5_Pos) /*!< 0x00000020 */ +#define HSEM_C2IER_ISE5 HSEM_C2IER_ISE5_Msk /*!<semaphore 5 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE6_Pos (6U) +#define HSEM_C2IER_ISE6_Msk (0x1UL << HSEM_C2IER_ISE6_Pos) /*!< 0x00000040 */ +#define HSEM_C2IER_ISE6 HSEM_C2IER_ISE6_Msk /*!<semaphore 6 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE7_Pos (7U) +#define HSEM_C2IER_ISE7_Msk (0x1UL << HSEM_C2IER_ISE7_Pos) /*!< 0x00000080 */ +#define HSEM_C2IER_ISE7 HSEM_C2IER_ISE7_Msk /*!<semaphore 7 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE8_Pos (8U) +#define HSEM_C2IER_ISE8_Msk (0x1UL << HSEM_C2IER_ISE8_Pos) /*!< 0x00000100 */ +#define HSEM_C2IER_ISE8 HSEM_C2IER_ISE8_Msk /*!<semaphore 8 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE9_Pos (9U) +#define HSEM_C2IER_ISE9_Msk (0x1UL << HSEM_C2IER_ISE9_Pos) /*!< 0x00000200 */ +#define HSEM_C2IER_ISE9 HSEM_C2IER_ISE9_Msk /*!<semaphore 9 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE10_Pos (10U) +#define HSEM_C2IER_ISE10_Msk (0x1UL << HSEM_C2IER_ISE10_Pos) /*!< 0x00000400 */ +#define HSEM_C2IER_ISE10 HSEM_C2IER_ISE10_Msk /*!<semaphore 10 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE11_Pos (11U) +#define HSEM_C2IER_ISE11_Msk (0x1UL << HSEM_C2IER_ISE11_Pos) /*!< 0x00000800 */ +#define HSEM_C2IER_ISE11 HSEM_C2IER_ISE11_Msk /*!<semaphore 11 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE12_Pos (12U) +#define HSEM_C2IER_ISE12_Msk (0x1UL << HSEM_C2IER_ISE12_Pos) /*!< 0x00001000 */ +#define HSEM_C2IER_ISE12 HSEM_C2IER_ISE12_Msk /*!<semaphore 12 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE13_Pos (13U) +#define HSEM_C2IER_ISE13_Msk (0x1UL << HSEM_C2IER_ISE13_Pos) /*!< 0x00002000 */ +#define HSEM_C2IER_ISE13 HSEM_C2IER_ISE13_Msk /*!<semaphore 13 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE14_Pos (14U) +#define HSEM_C2IER_ISE14_Msk (0x1UL << HSEM_C2IER_ISE14_Pos) /*!< 0x00004000 */ +#define HSEM_C2IER_ISE14 HSEM_C2IER_ISE14_Msk /*!<semaphore 14 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE15_Pos (15U) +#define HSEM_C2IER_ISE15_Msk (0x1UL << HSEM_C2IER_ISE15_Pos) /*!< 0x00008000 */ +#define HSEM_C2IER_ISE15 HSEM_C2IER_ISE15_Msk /*!<semaphore 15 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE16_Pos (16U) +#define HSEM_C2IER_ISE16_Msk (0x1UL << HSEM_C2IER_ISE16_Pos) /*!< 0x00010000 */ +#define HSEM_C2IER_ISE16 HSEM_C2IER_ISE16_Msk /*!<semaphore 16 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE17_Pos (17U) +#define HSEM_C2IER_ISE17_Msk (0x1UL << HSEM_C2IER_ISE17_Pos) /*!< 0x00020000 */ +#define HSEM_C2IER_ISE17 HSEM_C2IER_ISE17_Msk /*!<semaphore 17 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE18_Pos (18U) +#define HSEM_C2IER_ISE18_Msk (0x1UL << HSEM_C2IER_ISE18_Pos) /*!< 0x00040000 */ +#define HSEM_C2IER_ISE18 HSEM_C2IER_ISE18_Msk /*!<semaphore 18 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE19_Pos (19U) +#define HSEM_C2IER_ISE19_Msk (0x1UL << HSEM_C2IER_ISE19_Pos) /*!< 0x00080000 */ +#define HSEM_C2IER_ISE19 HSEM_C2IER_ISE19_Msk /*!<semaphore 19 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE20_Pos (20U) +#define HSEM_C2IER_ISE20_Msk (0x1UL << HSEM_C2IER_ISE20_Pos) /*!< 0x00100000 */ +#define HSEM_C2IER_ISE20 HSEM_C2IER_ISE20_Msk /*!<semaphore 20 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE21_Pos (21U) +#define HSEM_C2IER_ISE21_Msk (0x1UL << HSEM_C2IER_ISE21_Pos) /*!< 0x00200000 */ +#define HSEM_C2IER_ISE21 HSEM_C2IER_ISE21_Msk /*!<semaphore 21 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE22_Pos (22U) +#define HSEM_C2IER_ISE22_Msk (0x1UL << HSEM_C2IER_ISE22_Pos) /*!< 0x00400000 */ +#define HSEM_C2IER_ISE22 HSEM_C2IER_ISE22_Msk /*!<semaphore 22 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE23_Pos (23U) +#define HSEM_C2IER_ISE23_Msk (0x1UL << HSEM_C2IER_ISE23_Pos) /*!< 0x00800000 */ +#define HSEM_C2IER_ISE23 HSEM_C2IER_ISE23_Msk /*!<semaphore 23 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE24_Pos (24U) +#define HSEM_C2IER_ISE24_Msk (0x1UL << HSEM_C2IER_ISE24_Pos) /*!< 0x01000000 */ +#define HSEM_C2IER_ISE24 HSEM_C2IER_ISE24_Msk /*!<semaphore 24 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE25_Pos (25U) +#define HSEM_C2IER_ISE25_Msk (0x1UL << HSEM_C2IER_ISE25_Pos) /*!< 0x02000000 */ +#define HSEM_C2IER_ISE25 HSEM_C2IER_ISE25_Msk /*!<semaphore 25 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE26_Pos (26U) +#define HSEM_C2IER_ISE26_Msk (0x1UL << HSEM_C2IER_ISE26_Pos) /*!< 0x04000000 */ +#define HSEM_C2IER_ISE26 HSEM_C2IER_ISE26_Msk /*!<semaphore 26 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE27_Pos (27U) +#define HSEM_C2IER_ISE27_Msk (0x1UL << HSEM_C2IER_ISE27_Pos) /*!< 0x08000000 */ +#define HSEM_C2IER_ISE27 HSEM_C2IER_ISE27_Msk /*!<semaphore 27 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE28_Pos (28U) +#define HSEM_C2IER_ISE28_Msk (0x1UL << HSEM_C2IER_ISE28_Pos) /*!< 0x10000000 */ +#define HSEM_C2IER_ISE28 HSEM_C2IER_ISE28_Msk /*!<semaphore 28 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE29_Pos (29U) +#define HSEM_C2IER_ISE29_Msk (0x1UL << HSEM_C2IER_ISE29_Pos) /*!< 0x20000000 */ +#define HSEM_C2IER_ISE29 HSEM_C2IER_ISE29_Msk /*!<semaphore 29 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE30_Pos (30U) +#define HSEM_C2IER_ISE30_Msk (0x1UL << HSEM_C2IER_ISE30_Pos) /*!< 0x40000000 */ +#define HSEM_C2IER_ISE30 HSEM_C2IER_ISE30_Msk /*!<semaphore 30 CPU2 interrupt enable bit. */ +#define HSEM_C2IER_ISE31_Pos (31U) +#define HSEM_C2IER_ISE31_Msk (0x1UL << HSEM_C2IER_ISE31_Pos) /*!< 0x80000000 */ +#define HSEM_C2IER_ISE31 HSEM_C2IER_ISE31_Msk /*!<semaphore 31 CPU2 interrupt enable bit. */ + +/******************** Bit definition for HSEM_C2ICR register *****************/ +#define HSEM_C2ICR_ISC0_Pos (0U) +#define HSEM_C2ICR_ISC0_Msk (0x1UL << HSEM_C2ICR_ISC0_Pos) /*!< 0x00000001 */ +#define HSEM_C2ICR_ISC0 HSEM_C2ICR_ISC0_Msk /*!<semaphore 0 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC1_Pos (1U) +#define HSEM_C2ICR_ISC1_Msk (0x1UL << HSEM_C2ICR_ISC1_Pos) /*!< 0x00000002 */ +#define HSEM_C2ICR_ISC1 HSEM_C2ICR_ISC1_Msk /*!<semaphore 1 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC2_Pos (2U) +#define HSEM_C2ICR_ISC2_Msk (0x1UL << HSEM_C2ICR_ISC2_Pos) /*!< 0x00000004 */ +#define HSEM_C2ICR_ISC2 HSEM_C2ICR_ISC2_Msk /*!<semaphore 2 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC3_Pos (3U) +#define HSEM_C2ICR_ISC3_Msk (0x1UL << HSEM_C2ICR_ISC3_Pos) /*!< 0x00000008 */ +#define HSEM_C2ICR_ISC3 HSEM_C2ICR_ISC3_Msk /*!<semaphore 3 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC4_Pos (4U) +#define HSEM_C2ICR_ISC4_Msk (0x1UL << HSEM_C2ICR_ISC4_Pos) /*!< 0x00000010 */ +#define HSEM_C2ICR_ISC4 HSEM_C2ICR_ISC4_Msk /*!<semaphore 4 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC5_Pos (5U) +#define HSEM_C2ICR_ISC5_Msk (0x1UL << HSEM_C2ICR_ISC5_Pos) /*!< 0x00000020 */ +#define HSEM_C2ICR_ISC5 HSEM_C2ICR_ISC5_Msk /*!<semaphore 5 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC6_Pos (6U) +#define HSEM_C2ICR_ISC6_Msk (0x1UL << HSEM_C2ICR_ISC6_Pos) /*!< 0x00000040 */ +#define HSEM_C2ICR_ISC6 HSEM_C2ICR_ISC6_Msk /*!<semaphore 6 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC7_Pos (7U) +#define HSEM_C2ICR_ISC7_Msk (0x1UL << HSEM_C2ICR_ISC7_Pos) /*!< 0x00000080 */ +#define HSEM_C2ICR_ISC7 HSEM_C2ICR_ISC7_Msk /*!<semaphore 7 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC8_Pos (8U) +#define HSEM_C2ICR_ISC8_Msk (0x1UL << HSEM_C2ICR_ISC8_Pos) /*!< 0x00000100 */ +#define HSEM_C2ICR_ISC8 HSEM_C2ICR_ISC8_Msk /*!<semaphore 8 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC9_Pos (9U) +#define HSEM_C2ICR_ISC9_Msk (0x1UL << HSEM_C2ICR_ISC9_Pos) /*!< 0x00000200 */ +#define HSEM_C2ICR_ISC9 HSEM_C2ICR_ISC9_Msk /*!<semaphore 9 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC10_Pos (10U) +#define HSEM_C2ICR_ISC10_Msk (0x1UL << HSEM_C2ICR_ISC10_Pos) /*!< 0x00000400 */ +#define HSEM_C2ICR_ISC10 HSEM_C2ICR_ISC10_Msk /*!<semaphore 10 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC11_Pos (11U) +#define HSEM_C2ICR_ISC11_Msk (0x1UL << HSEM_C2ICR_ISC11_Pos) /*!< 0x00000800 */ +#define HSEM_C2ICR_ISC11 HSEM_C2ICR_ISC11_Msk /*!<semaphore 11 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC12_Pos (12U) +#define HSEM_C2ICR_ISC12_Msk (0x1UL << HSEM_C2ICR_ISC12_Pos) /*!< 0x00001000 */ +#define HSEM_C2ICR_ISC12 HSEM_C2ICR_ISC12_Msk /*!<semaphore 12 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC13_Pos (13U) +#define HSEM_C2ICR_ISC13_Msk (0x1UL << HSEM_C2ICR_ISC13_Pos) /*!< 0x00002000 */ +#define HSEM_C2ICR_ISC13 HSEM_C2ICR_ISC13_Msk /*!<semaphore 13 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC14_Pos (14U) +#define HSEM_C2ICR_ISC14_Msk (0x1UL << HSEM_C2ICR_ISC14_Pos) /*!< 0x00004000 */ +#define HSEM_C2ICR_ISC14 HSEM_C2ICR_ISC14_Msk /*!<semaphore 14 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC15_Pos (15U) +#define HSEM_C2ICR_ISC15_Msk (0x1UL << HSEM_C2ICR_ISC15_Pos) /*!< 0x00008000 */ +#define HSEM_C2ICR_ISC15 HSEM_C2ICR_ISC15_Msk /*!<semaphore 15 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC16_Pos (16U) +#define HSEM_C2ICR_ISC16_Msk (0x1UL << HSEM_C2ICR_ISC16_Pos) /*!< 0x00010000 */ +#define HSEM_C2ICR_ISC16 HSEM_C2ICR_ISC16_Msk /*!<semaphore 16 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC17_Pos (17U) +#define HSEM_C2ICR_ISC17_Msk (0x1UL << HSEM_C2ICR_ISC17_Pos) /*!< 0x00020000 */ +#define HSEM_C2ICR_ISC17 HSEM_C2ICR_ISC17_Msk /*!<semaphore 17 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC18_Pos (18U) +#define HSEM_C2ICR_ISC18_Msk (0x1UL << HSEM_C2ICR_ISC18_Pos) /*!< 0x00040000 */ +#define HSEM_C2ICR_ISC18 HSEM_C2ICR_ISC18_Msk /*!<semaphore 18 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC19_Pos (19U) +#define HSEM_C2ICR_ISC19_Msk (0x1UL << HSEM_C2ICR_ISC19_Pos) /*!< 0x00080000 */ +#define HSEM_C2ICR_ISC19 HSEM_C2ICR_ISC19_Msk /*!<semaphore 19 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC20_Pos (20U) +#define HSEM_C2ICR_ISC20_Msk (0x1UL << HSEM_C2ICR_ISC20_Pos) /*!< 0x00100000 */ +#define HSEM_C2ICR_ISC20 HSEM_C2ICR_ISC20_Msk /*!<semaphore 20 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC21_Pos (21U) +#define HSEM_C2ICR_ISC21_Msk (0x1UL << HSEM_C2ICR_ISC21_Pos) /*!< 0x00200000 */ +#define HSEM_C2ICR_ISC21 HSEM_C2ICR_ISC21_Msk /*!<semaphore 21 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC22_Pos (22U) +#define HSEM_C2ICR_ISC22_Msk (0x1UL << HSEM_C2ICR_ISC22_Pos) /*!< 0x00400000 */ +#define HSEM_C2ICR_ISC22 HSEM_C2ICR_ISC22_Msk /*!<semaphore 22 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC23_Pos (23U) +#define HSEM_C2ICR_ISC23_Msk (0x1UL << HSEM_C2ICR_ISC23_Pos) /*!< 0x00800000 */ +#define HSEM_C2ICR_ISC23 HSEM_C2ICR_ISC23_Msk /*!<semaphore 23 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC24_Pos (24U) +#define HSEM_C2ICR_ISC24_Msk (0x1UL << HSEM_C2ICR_ISC24_Pos) /*!< 0x01000000 */ +#define HSEM_C2ICR_ISC24 HSEM_C2ICR_ISC24_Msk /*!<semaphore 24 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC25_Pos (25U) +#define HSEM_C2ICR_ISC25_Msk (0x1UL << HSEM_C2ICR_ISC25_Pos) /*!< 0x02000000 */ +#define HSEM_C2ICR_ISC25 HSEM_C2ICR_ISC25_Msk /*!<semaphore 25 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC26_Pos (26U) +#define HSEM_C2ICR_ISC26_Msk (0x1UL << HSEM_C2ICR_ISC26_Pos) /*!< 0x04000000 */ +#define HSEM_C2ICR_ISC26 HSEM_C2ICR_ISC26_Msk /*!<semaphore 26 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC27_Pos (27U) +#define HSEM_C2ICR_ISC27_Msk (0x1UL << HSEM_C2ICR_ISC27_Pos) /*!< 0x08000000 */ +#define HSEM_C2ICR_ISC27 HSEM_C2ICR_ISC27_Msk /*!<semaphore 27 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC28_Pos (28U) +#define HSEM_C2ICR_ISC28_Msk (0x1UL << HSEM_C2ICR_ISC28_Pos) /*!< 0x10000000 */ +#define HSEM_C2ICR_ISC28 HSEM_C2ICR_ISC28_Msk /*!<semaphore 28 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC29_Pos (29U) +#define HSEM_C2ICR_ISC29_Msk (0x1UL << HSEM_C2ICR_ISC29_Pos) /*!< 0x20000000 */ +#define HSEM_C2ICR_ISC29 HSEM_C2ICR_ISC29_Msk /*!<semaphore 29 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC30_Pos (30U) +#define HSEM_C2ICR_ISC30_Msk (0x1UL << HSEM_C2ICR_ISC30_Pos) /*!< 0x40000000 */ +#define HSEM_C2ICR_ISC30 HSEM_C2ICR_ISC30_Msk /*!<semaphore 30 CPU2 interrupt clear bit. */ +#define HSEM_C2ICR_ISC31_Pos (31U) +#define HSEM_C2ICR_ISC31_Msk (0x1UL << HSEM_C2ICR_ISC31_Pos) /*!< 0x80000000 */ +#define HSEM_C2ICR_ISC31 HSEM_C2ICR_ISC31_Msk /*!<semaphore 31 CPU2 interrupt clear bit. */ + +/******************** Bit definition for HSEM_C2ISR register *****************/ +#define HSEM_C2ISR_ISF0_Pos (0U) +#define HSEM_C2ISR_ISF0_Msk (0x1UL << HSEM_C2ISR_ISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C2ISR_ISF0 HSEM_C2ISR_ISF0_Msk /*!<semaphore 0 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF1_Pos (1U) +#define HSEM_C2ISR_ISF1_Msk (0x1UL << HSEM_C2ISR_ISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C2ISR_ISF1 HSEM_C2ISR_ISF1_Msk /*!<semaphore 1 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF2_Pos (2U) +#define HSEM_C2ISR_ISF2_Msk (0x1UL << HSEM_C2ISR_ISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C2ISR_ISF2 HSEM_C2ISR_ISF2_Msk /*!<semaphore 2 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF3_Pos (3U) +#define HSEM_C2ISR_ISF3_Msk (0x1UL << HSEM_C2ISR_ISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C2ISR_ISF3 HSEM_C2ISR_ISF3_Msk /*!<semaphore 3 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF4_Pos (4U) +#define HSEM_C2ISR_ISF4_Msk (0x1UL << HSEM_C2ISR_ISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C2ISR_ISF4 HSEM_C2ISR_ISF4_Msk /*!<semaphore 4 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF5_Pos (5U) +#define HSEM_C2ISR_ISF5_Msk (0x1UL << HSEM_C2ISR_ISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C2ISR_ISF5 HSEM_C2ISR_ISF5_Msk /*!<semaphore 5 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF6_Pos (6U) +#define HSEM_C2ISR_ISF6_Msk (0x1UL << HSEM_C2ISR_ISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C2ISR_ISF6 HSEM_C2ISR_ISF6_Msk /*!<semaphore 6 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF7_Pos (7U) +#define HSEM_C2ISR_ISF7_Msk (0x1UL << HSEM_C2ISR_ISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C2ISR_ISF7 HSEM_C2ISR_ISF7_Msk /*!<semaphore 7 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF8_Pos (8U) +#define HSEM_C2ISR_ISF8_Msk (0x1UL << HSEM_C2ISR_ISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C2ISR_ISF8 HSEM_C2ISR_ISF8_Msk /*!<semaphore 8 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF9_Pos (9U) +#define HSEM_C2ISR_ISF9_Msk (0x1UL << HSEM_C2ISR_ISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C2ISR_ISF9 HSEM_C2ISR_ISF9_Msk /*!<semaphore 9 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF10_Pos (10U) +#define HSEM_C2ISR_ISF10_Msk (0x1UL << HSEM_C2ISR_ISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C2ISR_ISF10 HSEM_C2ISR_ISF10_Msk /*!<semaphore 10 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF11_Pos (11U) +#define HSEM_C2ISR_ISF11_Msk (0x1UL << HSEM_C2ISR_ISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C2ISR_ISF11 HSEM_C2ISR_ISF11_Msk /*!<semaphore 11 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF12_Pos (12U) +#define HSEM_C2ISR_ISF12_Msk (0x1UL << HSEM_C2ISR_ISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C2ISR_ISF12 HSEM_C2ISR_ISF12_Msk /*!<semaphore 12 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF13_Pos (13U) +#define HSEM_C2ISR_ISF13_Msk (0x1UL << HSEM_C2ISR_ISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C2ISR_ISF13 HSEM_C2ISR_ISF13_Msk /*!<semaphore 13 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF14_Pos (14U) +#define HSEM_C2ISR_ISF14_Msk (0x1UL << HSEM_C2ISR_ISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C2ISR_ISF14 HSEM_C2ISR_ISF14_Msk /*!<semaphore 14 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF15_Pos (15U) +#define HSEM_C2ISR_ISF15_Msk (0x1UL << HSEM_C2ISR_ISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C2ISR_ISF15 HSEM_C2ISR_ISF15_Msk /*!<semaphore 15 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF16_Pos (16U) +#define HSEM_C2ISR_ISF16_Msk (0x1UL << HSEM_C2ISR_ISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C2ISR_ISF16 HSEM_C2ISR_ISF16_Msk /*!<semaphore 16 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF17_Pos (17U) +#define HSEM_C2ISR_ISF17_Msk (0x1UL << HSEM_C2ISR_ISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C2ISR_ISF17 HSEM_C2ISR_ISF17_Msk /*!<semaphore 17 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF18_Pos (18U) +#define HSEM_C2ISR_ISF18_Msk (0x1UL << HSEM_C2ISR_ISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C2ISR_ISF18 HSEM_C2ISR_ISF18_Msk /*!<semaphore 18 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF19_Pos (19U) +#define HSEM_C2ISR_ISF19_Msk (0x1UL << HSEM_C2ISR_ISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C2ISR_ISF19 HSEM_C2ISR_ISF19_Msk /*!<semaphore 19 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF20_Pos (20U) +#define HSEM_C2ISR_ISF20_Msk (0x1UL << HSEM_C2ISR_ISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C2ISR_ISF20 HSEM_C2ISR_ISF20_Msk /*!<semaphore 20 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF21_Pos (21U) +#define HSEM_C2ISR_ISF21_Msk (0x1UL << HSEM_C2ISR_ISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C2ISR_ISF21 HSEM_C2ISR_ISF21_Msk /*!<semaphore 21 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF22_Pos (22U) +#define HSEM_C2ISR_ISF22_Msk (0x1UL << HSEM_C2ISR_ISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C2ISR_ISF22 HSEM_C2ISR_ISF22_Msk /*!<semaphore 22 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF23_Pos (23U) +#define HSEM_C2ISR_ISF23_Msk (0x1UL << HSEM_C2ISR_ISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C2ISR_ISF23 HSEM_C2ISR_ISF23_Msk /*!<semaphore 23 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF24_Pos (24U) +#define HSEM_C2ISR_ISF24_Msk (0x1UL << HSEM_C2ISR_ISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C2ISR_ISF24 HSEM_C2ISR_ISF24_Msk /*!<semaphore 24 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF25_Pos (25U) +#define HSEM_C2ISR_ISF25_Msk (0x1UL << HSEM_C2ISR_ISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C2ISR_ISF25 HSEM_C2ISR_ISF25_Msk /*!<semaphore 25 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF26_Pos (26U) +#define HSEM_C2ISR_ISF26_Msk (0x1UL << HSEM_C2ISR_ISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C2ISR_ISF26 HSEM_C2ISR_ISF26_Msk /*!<semaphore 26 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF27_Pos (27U) +#define HSEM_C2ISR_ISF27_Msk (0x1UL << HSEM_C2ISR_ISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C2ISR_ISF27 HSEM_C2ISR_ISF27_Msk /*!<semaphore 27 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF28_Pos (28U) +#define HSEM_C2ISR_ISF28_Msk (0x1UL << HSEM_C2ISR_ISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C2ISR_ISF28 HSEM_C2ISR_ISF28_Msk /*!<semaphore 28 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF29_Pos (29U) +#define HSEM_C2ISR_ISF29_Msk (0x1UL << HSEM_C2ISR_ISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C2ISR_ISF29 HSEM_C2ISR_ISF29_Msk /*!<semaphore 29 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF30_Pos (30U) +#define HSEM_C2ISR_ISF30_Msk (0x1UL << HSEM_C2ISR_ISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C2ISR_ISF30 HSEM_C2ISR_ISF30_Msk /*!<semaphore 30 CPU2 interrupt status bit. */ +#define HSEM_C2ISR_ISF31_Pos (31U) +#define HSEM_C2ISR_ISF31_Msk (0x1UL << HSEM_C2ISR_ISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C2ISR_ISF31 HSEM_C2ISR_ISF31_Msk /*!<semaphore 31 CPU2 interrupt status bit. */ + +/******************** Bit definition for HSEM_C2MISR register *****************/ +#define HSEM_C2MISR_MISF0_Pos (0U) +#define HSEM_C2MISR_MISF0_Msk (0x1UL << HSEM_C2MISR_MISF0_Pos) /*!< 0x00000001 */ +#define HSEM_C2MISR_MISF0 HSEM_C2MISR_MISF0_Msk /*!<semaphore 0 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF1_Pos (1U) +#define HSEM_C2MISR_MISF1_Msk (0x1UL << HSEM_C2MISR_MISF1_Pos) /*!< 0x00000002 */ +#define HSEM_C2MISR_MISF1 HSEM_C2MISR_MISF1_Msk /*!<semaphore 1 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF2_Pos (2U) +#define HSEM_C2MISR_MISF2_Msk (0x1UL << HSEM_C2MISR_MISF2_Pos) /*!< 0x00000004 */ +#define HSEM_C2MISR_MISF2 HSEM_C2MISR_MISF2_Msk /*!<semaphore 2 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF3_Pos (3U) +#define HSEM_C2MISR_MISF3_Msk (0x1UL << HSEM_C2MISR_MISF3_Pos) /*!< 0x00000008 */ +#define HSEM_C2MISR_MISF3 HSEM_C2MISR_MISF3_Msk /*!<semaphore 3 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF4_Pos (4U) +#define HSEM_C2MISR_MISF4_Msk (0x1UL << HSEM_C2MISR_MISF4_Pos) /*!< 0x00000010 */ +#define HSEM_C2MISR_MISF4 HSEM_C2MISR_MISF4_Msk /*!<semaphore 4 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF5_Pos (5U) +#define HSEM_C2MISR_MISF5_Msk (0x1UL << HSEM_C2MISR_MISF5_Pos) /*!< 0x00000020 */ +#define HSEM_C2MISR_MISF5 HSEM_C2MISR_MISF5_Msk /*!<semaphore 5 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF6_Pos (6U) +#define HSEM_C2MISR_MISF6_Msk (0x1UL << HSEM_C2MISR_MISF6_Pos) /*!< 0x00000040 */ +#define HSEM_C2MISR_MISF6 HSEM_C2MISR_MISF6_Msk /*!<semaphore 6 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF7_Pos (7U) +#define HSEM_C2MISR_MISF7_Msk (0x1UL << HSEM_C2MISR_MISF7_Pos) /*!< 0x00000080 */ +#define HSEM_C2MISR_MISF7 HSEM_C2MISR_MISF7_Msk /*!<semaphore 7 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF8_Pos (8U) +#define HSEM_C2MISR_MISF8_Msk (0x1UL << HSEM_C2MISR_MISF8_Pos) /*!< 0x00000100 */ +#define HSEM_C2MISR_MISF8 HSEM_C2MISR_MISF8_Msk /*!<semaphore 8 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF9_Pos (9U) +#define HSEM_C2MISR_MISF9_Msk (0x1UL << HSEM_C2MISR_MISF9_Pos) /*!< 0x00000200 */ +#define HSEM_C2MISR_MISF9 HSEM_C2MISR_MISF9_Msk /*!<semaphore 9 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF10_Pos (10U) +#define HSEM_C2MISR_MISF10_Msk (0x1UL << HSEM_C2MISR_MISF10_Pos) /*!< 0x00000400 */ +#define HSEM_C2MISR_MISF10 HSEM_C2MISR_MISF10_Msk /*!<semaphore 10 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF11_Pos (11U) +#define HSEM_C2MISR_MISF11_Msk (0x1UL << HSEM_C2MISR_MISF11_Pos) /*!< 0x00000800 */ +#define HSEM_C2MISR_MISF11 HSEM_C2MISR_MISF11_Msk /*!<semaphore 11 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF12_Pos (12U) +#define HSEM_C2MISR_MISF12_Msk (0x1UL << HSEM_C2MISR_MISF12_Pos) /*!< 0x00001000 */ +#define HSEM_C2MISR_MISF12 HSEM_C2MISR_MISF12_Msk /*!<semaphore 12 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF13_Pos (13U) +#define HSEM_C2MISR_MISF13_Msk (0x1UL << HSEM_C2MISR_MISF13_Pos) /*!< 0x00002000 */ +#define HSEM_C2MISR_MISF13 HSEM_C2MISR_MISF13_Msk /*!<semaphore 13 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF14_Pos (14U) +#define HSEM_C2MISR_MISF14_Msk (0x1UL << HSEM_C2MISR_MISF14_Pos) /*!< 0x00004000 */ +#define HSEM_C2MISR_MISF14 HSEM_C2MISR_MISF14_Msk /*!<semaphore 14 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF15_Pos (15U) +#define HSEM_C2MISR_MISF15_Msk (0x1UL << HSEM_C2MISR_MISF15_Pos) /*!< 0x00008000 */ +#define HSEM_C2MISR_MISF15 HSEM_C2MISR_MISF15_Msk /*!<semaphore 15 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF16_Pos (16U) +#define HSEM_C2MISR_MISF16_Msk (0x1UL << HSEM_C2MISR_MISF16_Pos) /*!< 0x00010000 */ +#define HSEM_C2MISR_MISF16 HSEM_C2MISR_MISF16_Msk /*!<semaphore 16 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF17_Pos (17U) +#define HSEM_C2MISR_MISF17_Msk (0x1UL << HSEM_C2MISR_MISF17_Pos) /*!< 0x00020000 */ +#define HSEM_C2MISR_MISF17 HSEM_C2MISR_MISF17_Msk /*!<semaphore 17 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF18_Pos (18U) +#define HSEM_C2MISR_MISF18_Msk (0x1UL << HSEM_C2MISR_MISF18_Pos) /*!< 0x00040000 */ +#define HSEM_C2MISR_MISF18 HSEM_C2MISR_MISF18_Msk /*!<semaphore 18 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF19_Pos (19U) +#define HSEM_C2MISR_MISF19_Msk (0x1UL << HSEM_C2MISR_MISF19_Pos) /*!< 0x00080000 */ +#define HSEM_C2MISR_MISF19 HSEM_C2MISR_MISF19_Msk /*!<semaphore 19 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF20_Pos (20U) +#define HSEM_C2MISR_MISF20_Msk (0x1UL << HSEM_C2MISR_MISF20_Pos) /*!< 0x00100000 */ +#define HSEM_C2MISR_MISF20 HSEM_C2MISR_MISF20_Msk /*!<semaphore 20 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF21_Pos (21U) +#define HSEM_C2MISR_MISF21_Msk (0x1UL << HSEM_C2MISR_MISF21_Pos) /*!< 0x00200000 */ +#define HSEM_C2MISR_MISF21 HSEM_C2MISR_MISF21_Msk /*!<semaphore 21 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF22_Pos (22U) +#define HSEM_C2MISR_MISF22_Msk (0x1UL << HSEM_C2MISR_MISF22_Pos) /*!< 0x00400000 */ +#define HSEM_C2MISR_MISF22 HSEM_C2MISR_MISF22_Msk /*!<semaphore 22 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF23_Pos (23U) +#define HSEM_C2MISR_MISF23_Msk (0x1UL << HSEM_C2MISR_MISF23_Pos) /*!< 0x00800000 */ +#define HSEM_C2MISR_MISF23 HSEM_C2MISR_MISF23_Msk /*!<semaphore 23 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF24_Pos (24U) +#define HSEM_C2MISR_MISF24_Msk (0x1UL << HSEM_C2MISR_MISF24_Pos) /*!< 0x01000000 */ +#define HSEM_C2MISR_MISF24 HSEM_C2MISR_MISF24_Msk /*!<semaphore 24 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF25_Pos (25U) +#define HSEM_C2MISR_MISF25_Msk (0x1UL << HSEM_C2MISR_MISF25_Pos) /*!< 0x02000000 */ +#define HSEM_C2MISR_MISF25 HSEM_C2MISR_MISF25_Msk /*!<semaphore 25 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF26_Pos (26U) +#define HSEM_C2MISR_MISF26_Msk (0x1UL << HSEM_C2MISR_MISF26_Pos) /*!< 0x04000000 */ +#define HSEM_C2MISR_MISF26 HSEM_C2MISR_MISF26_Msk /*!<semaphore 26 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF27_Pos (27U) +#define HSEM_C2MISR_MISF27_Msk (0x1UL << HSEM_C2MISR_MISF27_Pos) /*!< 0x08000000 */ +#define HSEM_C2MISR_MISF27 HSEM_C2MISR_MISF27_Msk /*!<semaphore 27 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF28_Pos (28U) +#define HSEM_C2MISR_MISF28_Msk (0x1UL << HSEM_C2MISR_MISF28_Pos) /*!< 0x10000000 */ +#define HSEM_C2MISR_MISF28 HSEM_C2MISR_MISF28_Msk /*!<semaphore 28 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF29_Pos (29U) +#define HSEM_C2MISR_MISF29_Msk (0x1UL << HSEM_C2MISR_MISF29_Pos) /*!< 0x20000000 */ +#define HSEM_C2MISR_MISF29 HSEM_C2MISR_MISF29_Msk /*!<semaphore 29 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF30_Pos (30U) +#define HSEM_C2MISR_MISF30_Msk (0x1UL << HSEM_C2MISR_MISF30_Pos) /*!< 0x40000000 */ +#define HSEM_C2MISR_MISF30 HSEM_C2MISR_MISF30_Msk /*!<semaphore 30 CPU2 interrupt masked status bit. */ +#define HSEM_C2MISR_MISF31_Pos (31U) +#define HSEM_C2MISR_MISF31_Msk (0x1UL << HSEM_C2MISR_MISF31_Pos) /*!< 0x80000000 */ +#define HSEM_C2MISR_MISF31 HSEM_C2MISR_MISF31_Msk /*!<semaphore 31 CPU2 interrupt masked status bit. */ + +/******************** Bit definition for HSEM_CR register *****************/ +#define HSEM_CR_COREID_Pos (8U) +#define HSEM_CR_COREID_Msk (0xFUL << HSEM_CR_COREID_Pos) /*!< 0x00000F00 */ +#define HSEM_CR_COREID HSEM_CR_COREID_Msk /*!<CoreID of semaphores to be cleared. */ +#define HSEM_CR_COREID_CPU1 (0x4U << HSEM_CR_COREID_Pos) +#define HSEM_CR_COREID_CPU2 (0x8U << HSEM_CR_COREID_Pos) +#define HSEM_CR_COREID_CURRENT HSEM_CR_COREID_CPU1 +#define HSEM_CR_KEY_Pos (16U) +#define HSEM_CR_KEY_Msk (0xFFFFUL << HSEM_CR_KEY_Pos) /*!< 0xFFFF0000 */ +#define HSEM_CR_KEY HSEM_CR_KEY_Msk /*!<semaphores clear key. */ + +/******************** Bit definition for HSEM_KEYR register *****************/ +#define HSEM_KEYR_KEY_Pos (16U) +#define HSEM_KEYR_KEY_Msk (0xFFFFUL << HSEM_KEYR_KEY_Pos) /*!< 0xFFFF0000 */ +#define HSEM_KEYR_KEY HSEM_KEYR_KEY_Msk /*!<semaphores clear key. */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for I2C_CR1 register *******************/ +#define I2C_CR1_PE_Pos (0U) +#define I2C_CR1_PE_Msk (0x1UL << I2C_CR1_PE_Pos) /*!< 0x00000001 */ +#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral enable */ +#define I2C_CR1_TXIE_Pos (1U) +#define I2C_CR1_TXIE_Msk (0x1UL << I2C_CR1_TXIE_Pos) /*!< 0x00000002 */ +#define I2C_CR1_TXIE I2C_CR1_TXIE_Msk /*!< TX interrupt enable */ +#define I2C_CR1_RXIE_Pos (2U) +#define I2C_CR1_RXIE_Msk (0x1UL << I2C_CR1_RXIE_Pos) /*!< 0x00000004 */ +#define I2C_CR1_RXIE I2C_CR1_RXIE_Msk /*!< RX interrupt enable */ +#define I2C_CR1_ADDRIE_Pos (3U) +#define I2C_CR1_ADDRIE_Msk (0x1UL << I2C_CR1_ADDRIE_Pos) /*!< 0x00000008 */ +#define I2C_CR1_ADDRIE I2C_CR1_ADDRIE_Msk /*!< Address match interrupt enable */ +#define I2C_CR1_NACKIE_Pos (4U) +#define I2C_CR1_NACKIE_Msk (0x1UL << I2C_CR1_NACKIE_Pos) /*!< 0x00000010 */ +#define I2C_CR1_NACKIE I2C_CR1_NACKIE_Msk /*!< NACK received interrupt enable */ +#define I2C_CR1_STOPIE_Pos (5U) +#define I2C_CR1_STOPIE_Msk (0x1UL << I2C_CR1_STOPIE_Pos) /*!< 0x00000020 */ +#define I2C_CR1_STOPIE I2C_CR1_STOPIE_Msk /*!< STOP detection interrupt enable */ +#define I2C_CR1_TCIE_Pos (6U) +#define I2C_CR1_TCIE_Msk (0x1UL << I2C_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define I2C_CR1_TCIE I2C_CR1_TCIE_Msk /*!< Transfer complete interrupt enable */ +#define I2C_CR1_ERRIE_Pos (7U) +#define I2C_CR1_ERRIE_Msk (0x1UL << I2C_CR1_ERRIE_Pos) /*!< 0x00000080 */ +#define I2C_CR1_ERRIE I2C_CR1_ERRIE_Msk /*!< Errors interrupt enable */ +#define I2C_CR1_DNF_Pos (8U) +#define I2C_CR1_DNF_Msk (0xFUL << I2C_CR1_DNF_Pos) /*!< 0x00000F00 */ +#define I2C_CR1_DNF I2C_CR1_DNF_Msk /*!< Digital noise filter */ +#define I2C_CR1_ANFOFF_Pos (12U) +#define I2C_CR1_ANFOFF_Msk (0x1UL << I2C_CR1_ANFOFF_Pos) /*!< 0x00001000 */ +#define I2C_CR1_ANFOFF I2C_CR1_ANFOFF_Msk /*!< Analog noise filter OFF */ +#define I2C_CR1_SWRST_Pos (13U) +#define I2C_CR1_SWRST_Msk (0x1UL << I2C_CR1_SWRST_Pos) /*!< 0x00002000 */ +#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software reset */ +#define I2C_CR1_TXDMAEN_Pos (14U) +#define I2C_CR1_TXDMAEN_Msk (0x1UL << I2C_CR1_TXDMAEN_Pos) /*!< 0x00004000 */ +#define I2C_CR1_TXDMAEN I2C_CR1_TXDMAEN_Msk /*!< DMA transmission requests enable */ +#define I2C_CR1_RXDMAEN_Pos (15U) +#define I2C_CR1_RXDMAEN_Msk (0x1UL << I2C_CR1_RXDMAEN_Pos) /*!< 0x00008000 */ +#define I2C_CR1_RXDMAEN I2C_CR1_RXDMAEN_Msk /*!< DMA reception requests enable */ +#define I2C_CR1_SBC_Pos (16U) +#define I2C_CR1_SBC_Msk (0x1UL << I2C_CR1_SBC_Pos) /*!< 0x00010000 */ +#define I2C_CR1_SBC I2C_CR1_SBC_Msk /*!< Slave byte control */ +#define I2C_CR1_NOSTRETCH_Pos (17U) +#define I2C_CR1_NOSTRETCH_Msk (0x1UL << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00020000 */ +#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock stretching disable */ +#define I2C_CR1_WUPEN_Pos (18U) +#define I2C_CR1_WUPEN_Msk (0x1UL << I2C_CR1_WUPEN_Pos) /*!< 0x00040000 */ +#define I2C_CR1_WUPEN I2C_CR1_WUPEN_Msk /*!< Wakeup from STOP enable */ +#define I2C_CR1_GCEN_Pos (19U) +#define I2C_CR1_GCEN_Msk (0x1UL << I2C_CR1_GCEN_Pos) /*!< 0x00080000 */ +#define I2C_CR1_GCEN I2C_CR1_GCEN_Msk /*!< General call enable */ +#define I2C_CR1_SMBHEN_Pos (20U) +#define I2C_CR1_SMBHEN_Msk (0x1UL << I2C_CR1_SMBHEN_Pos) /*!< 0x00100000 */ +#define I2C_CR1_SMBHEN I2C_CR1_SMBHEN_Msk /*!< SMBus host address enable */ +#define I2C_CR1_SMBDEN_Pos (21U) +#define I2C_CR1_SMBDEN_Msk (0x1UL << I2C_CR1_SMBDEN_Pos) /*!< 0x00200000 */ +#define I2C_CR1_SMBDEN I2C_CR1_SMBDEN_Msk /*!< SMBus device default address enable */ +#define I2C_CR1_ALERTEN_Pos (22U) +#define I2C_CR1_ALERTEN_Msk (0x1UL << I2C_CR1_ALERTEN_Pos) /*!< 0x00400000 */ +#define I2C_CR1_ALERTEN I2C_CR1_ALERTEN_Msk /*!< SMBus alert enable */ +#define I2C_CR1_PECEN_Pos (23U) +#define I2C_CR1_PECEN_Msk (0x1UL << I2C_CR1_PECEN_Pos) /*!< 0x00800000 */ +#define I2C_CR1_PECEN I2C_CR1_PECEN_Msk /*!< PEC enable */ + +/****************** Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_SADD_Pos (0U) +#define I2C_CR2_SADD_Msk (0x3FFUL << I2C_CR2_SADD_Pos) /*!< 0x000003FF */ +#define I2C_CR2_SADD I2C_CR2_SADD_Msk /*!< Slave address (master mode) */ +#define I2C_CR2_RD_WRN_Pos (10U) +#define I2C_CR2_RD_WRN_Msk (0x1UL << I2C_CR2_RD_WRN_Pos) /*!< 0x00000400 */ +#define I2C_CR2_RD_WRN I2C_CR2_RD_WRN_Msk /*!< Transfer direction (master mode) */ +#define I2C_CR2_ADD10_Pos (11U) +#define I2C_CR2_ADD10_Msk (0x1UL << I2C_CR2_ADD10_Pos) /*!< 0x00000800 */ +#define I2C_CR2_ADD10 I2C_CR2_ADD10_Msk /*!< 10-bit addressing mode (master mode) */ +#define I2C_CR2_HEAD10R_Pos (12U) +#define I2C_CR2_HEAD10R_Msk (0x1UL << I2C_CR2_HEAD10R_Pos) /*!< 0x00001000 */ +#define I2C_CR2_HEAD10R I2C_CR2_HEAD10R_Msk /*!< 10-bit address header only read direction (master mode) */ +#define I2C_CR2_START_Pos (13U) +#define I2C_CR2_START_Msk (0x1UL << I2C_CR2_START_Pos) /*!< 0x00002000 */ +#define I2C_CR2_START I2C_CR2_START_Msk /*!< START generation */ +#define I2C_CR2_STOP_Pos (14U) +#define I2C_CR2_STOP_Msk (0x1UL << I2C_CR2_STOP_Pos) /*!< 0x00004000 */ +#define I2C_CR2_STOP I2C_CR2_STOP_Msk /*!< STOP generation (master mode) */ +#define I2C_CR2_NACK_Pos (15U) +#define I2C_CR2_NACK_Msk (0x1UL << I2C_CR2_NACK_Pos) /*!< 0x00008000 */ +#define I2C_CR2_NACK I2C_CR2_NACK_Msk /*!< NACK generation (slave mode) */ +#define I2C_CR2_NBYTES_Pos (16U) +#define I2C_CR2_NBYTES_Msk (0xFFUL << I2C_CR2_NBYTES_Pos) /*!< 0x00FF0000 */ +#define I2C_CR2_NBYTES I2C_CR2_NBYTES_Msk /*!< Number of bytes */ +#define I2C_CR2_RELOAD_Pos (24U) +#define I2C_CR2_RELOAD_Msk (0x1UL << I2C_CR2_RELOAD_Pos) /*!< 0x01000000 */ +#define I2C_CR2_RELOAD I2C_CR2_RELOAD_Msk /*!< NBYTES reload mode */ +#define I2C_CR2_AUTOEND_Pos (25U) +#define I2C_CR2_AUTOEND_Msk (0x1UL << I2C_CR2_AUTOEND_Pos) /*!< 0x02000000 */ +#define I2C_CR2_AUTOEND I2C_CR2_AUTOEND_Msk /*!< Automatic end mode (master mode) */ +#define I2C_CR2_PECBYTE_Pos (26U) +#define I2C_CR2_PECBYTE_Msk (0x1UL << I2C_CR2_PECBYTE_Pos) /*!< 0x04000000 */ +#define I2C_CR2_PECBYTE I2C_CR2_PECBYTE_Msk /*!< Packet error checking byte */ + +/******************* Bit definition for I2C_OAR1 register ******************/ +#define I2C_OAR1_OA1_Pos (0U) +#define I2C_OAR1_OA1_Msk (0x3FFUL << I2C_OAR1_OA1_Pos) /*!< 0x000003FF */ +#define I2C_OAR1_OA1 I2C_OAR1_OA1_Msk /*!< Interface own address 1 */ +#define I2C_OAR1_OA1MODE_Pos (10U) +#define I2C_OAR1_OA1MODE_Msk (0x1UL << I2C_OAR1_OA1MODE_Pos) /*!< 0x00000400 */ +#define I2C_OAR1_OA1MODE I2C_OAR1_OA1MODE_Msk /*!< Own address 1 10-bit mode */ +#define I2C_OAR1_OA1EN_Pos (15U) +#define I2C_OAR1_OA1EN_Msk (0x1UL << I2C_OAR1_OA1EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR1_OA1EN I2C_OAR1_OA1EN_Msk /*!< Own address 1 enable */ + +/******************* Bit definition for I2C_OAR2 register ******************/ +#define I2C_OAR2_OA2_Pos (1U) +#define I2C_OAR2_OA2_Msk (0x7FUL << I2C_OAR2_OA2_Pos) /*!< 0x000000FE */ +#define I2C_OAR2_OA2 I2C_OAR2_OA2_Msk /*!< Interface own address 2 */ +#define I2C_OAR2_OA2MSK_Pos (8U) +#define I2C_OAR2_OA2MSK_Msk (0x7UL << I2C_OAR2_OA2MSK_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MSK I2C_OAR2_OA2MSK_Msk /*!< Own address 2 masks */ +#define I2C_OAR2_OA2NOMASK (0x00000000UL) /*!< No mask */ +#define I2C_OAR2_OA2MASK01_Pos (8U) +#define I2C_OAR2_OA2MASK01_Msk (0x1UL << I2C_OAR2_OA2MASK01_Pos) /*!< 0x00000100 */ +#define I2C_OAR2_OA2MASK01 I2C_OAR2_OA2MASK01_Msk /*!< OA2[1] is masked, Only OA2[7:2] are compared */ +#define I2C_OAR2_OA2MASK02_Pos (9U) +#define I2C_OAR2_OA2MASK02_Msk (0x1UL << I2C_OAR2_OA2MASK02_Pos) /*!< 0x00000200 */ +#define I2C_OAR2_OA2MASK02 I2C_OAR2_OA2MASK02_Msk /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */ +#define I2C_OAR2_OA2MASK03_Pos (8U) +#define I2C_OAR2_OA2MASK03_Msk (0x3UL << I2C_OAR2_OA2MASK03_Pos) /*!< 0x00000300 */ +#define I2C_OAR2_OA2MASK03 I2C_OAR2_OA2MASK03_Msk /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */ +#define I2C_OAR2_OA2MASK04_Pos (10U) +#define I2C_OAR2_OA2MASK04_Msk (0x1UL << I2C_OAR2_OA2MASK04_Pos) /*!< 0x00000400 */ +#define I2C_OAR2_OA2MASK04 I2C_OAR2_OA2MASK04_Msk /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */ +#define I2C_OAR2_OA2MASK05_Pos (8U) +#define I2C_OAR2_OA2MASK05_Msk (0x5UL << I2C_OAR2_OA2MASK05_Pos) /*!< 0x00000500 */ +#define I2C_OAR2_OA2MASK05 I2C_OAR2_OA2MASK05_Msk /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */ +#define I2C_OAR2_OA2MASK06_Pos (9U) +#define I2C_OAR2_OA2MASK06_Msk (0x3UL << I2C_OAR2_OA2MASK06_Pos) /*!< 0x00000600 */ +#define I2C_OAR2_OA2MASK06 I2C_OAR2_OA2MASK06_Msk /*!< OA2[6:1] is masked, Only OA2[7] are compared */ +#define I2C_OAR2_OA2MASK07_Pos (8U) +#define I2C_OAR2_OA2MASK07_Msk (0x7UL << I2C_OAR2_OA2MASK07_Pos) /*!< 0x00000700 */ +#define I2C_OAR2_OA2MASK07 I2C_OAR2_OA2MASK07_Msk /*!< OA2[7:1] is masked, No comparison is done */ +#define I2C_OAR2_OA2EN_Pos (15U) +#define I2C_OAR2_OA2EN_Msk (0x1UL << I2C_OAR2_OA2EN_Pos) /*!< 0x00008000 */ +#define I2C_OAR2_OA2EN I2C_OAR2_OA2EN_Msk /*!< Own address 2 enable */ + +/******************* Bit definition for I2C_TIMINGR register *******************/ +#define I2C_TIMINGR_SCLL_Pos (0U) +#define I2C_TIMINGR_SCLL_Msk (0xFFUL << I2C_TIMINGR_SCLL_Pos) /*!< 0x000000FF */ +#define I2C_TIMINGR_SCLL I2C_TIMINGR_SCLL_Msk /*!< SCL low period (master mode) */ +#define I2C_TIMINGR_SCLH_Pos (8U) +#define I2C_TIMINGR_SCLH_Msk (0xFFUL << I2C_TIMINGR_SCLH_Pos) /*!< 0x0000FF00 */ +#define I2C_TIMINGR_SCLH I2C_TIMINGR_SCLH_Msk /*!< SCL high period (master mode) */ +#define I2C_TIMINGR_SDADEL_Pos (16U) +#define I2C_TIMINGR_SDADEL_Msk (0xFUL << I2C_TIMINGR_SDADEL_Pos) /*!< 0x000F0000 */ +#define I2C_TIMINGR_SDADEL I2C_TIMINGR_SDADEL_Msk /*!< Data hold time */ +#define I2C_TIMINGR_SCLDEL_Pos (20U) +#define I2C_TIMINGR_SCLDEL_Msk (0xFUL << I2C_TIMINGR_SCLDEL_Pos) /*!< 0x00F00000 */ +#define I2C_TIMINGR_SCLDEL I2C_TIMINGR_SCLDEL_Msk /*!< Data setup time */ +#define I2C_TIMINGR_PRESC_Pos (28U) +#define I2C_TIMINGR_PRESC_Msk (0xFUL << I2C_TIMINGR_PRESC_Pos) /*!< 0xF0000000 */ +#define I2C_TIMINGR_PRESC I2C_TIMINGR_PRESC_Msk /*!< Timings prescaler */ + +/******************* Bit definition for I2C_TIMEOUTR register *******************/ +#define I2C_TIMEOUTR_TIMEOUTA_Pos (0U) +#define I2C_TIMEOUTR_TIMEOUTA_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTA_Pos) /*!< 0x00000FFF */ +#define I2C_TIMEOUTR_TIMEOUTA I2C_TIMEOUTR_TIMEOUTA_Msk /*!< Bus timeout A */ +#define I2C_TIMEOUTR_TIDLE_Pos (12U) +#define I2C_TIMEOUTR_TIDLE_Msk (0x1UL << I2C_TIMEOUTR_TIDLE_Pos) /*!< 0x00001000 */ +#define I2C_TIMEOUTR_TIDLE I2C_TIMEOUTR_TIDLE_Msk /*!< Idle clock timeout detection */ +#define I2C_TIMEOUTR_TIMOUTEN_Pos (15U) +#define I2C_TIMEOUTR_TIMOUTEN_Msk (0x1UL << I2C_TIMEOUTR_TIMOUTEN_Pos) /*!< 0x00008000 */ +#define I2C_TIMEOUTR_TIMOUTEN I2C_TIMEOUTR_TIMOUTEN_Msk /*!< Clock timeout enable */ +#define I2C_TIMEOUTR_TIMEOUTB_Pos (16U) +#define I2C_TIMEOUTR_TIMEOUTB_Msk (0xFFFUL << I2C_TIMEOUTR_TIMEOUTB_Pos) /*!< 0x0FFF0000 */ +#define I2C_TIMEOUTR_TIMEOUTB I2C_TIMEOUTR_TIMEOUTB_Msk /*!< Bus timeout B*/ +#define I2C_TIMEOUTR_TEXTEN_Pos (31U) +#define I2C_TIMEOUTR_TEXTEN_Msk (0x1UL << I2C_TIMEOUTR_TEXTEN_Pos) /*!< 0x80000000 */ +#define I2C_TIMEOUTR_TEXTEN I2C_TIMEOUTR_TEXTEN_Msk /*!< Extended clock timeout enable */ + +/****************** Bit definition for I2C_ISR register *********************/ +#define I2C_ISR_TXE_Pos (0U) +#define I2C_ISR_TXE_Msk (0x1UL << I2C_ISR_TXE_Pos) /*!< 0x00000001 */ +#define I2C_ISR_TXE I2C_ISR_TXE_Msk /*!< Transmit data register empty */ +#define I2C_ISR_TXIS_Pos (1U) +#define I2C_ISR_TXIS_Msk (0x1UL << I2C_ISR_TXIS_Pos) /*!< 0x00000002 */ +#define I2C_ISR_TXIS I2C_ISR_TXIS_Msk /*!< Transmit interrupt status */ +#define I2C_ISR_RXNE_Pos (2U) +#define I2C_ISR_RXNE_Msk (0x1UL << I2C_ISR_RXNE_Pos) /*!< 0x00000004 */ +#define I2C_ISR_RXNE I2C_ISR_RXNE_Msk /*!< Receive data register not empty */ +#define I2C_ISR_ADDR_Pos (3U) +#define I2C_ISR_ADDR_Msk (0x1UL << I2C_ISR_ADDR_Pos) /*!< 0x00000008 */ +#define I2C_ISR_ADDR I2C_ISR_ADDR_Msk /*!< Address matched (slave mode)*/ +#define I2C_ISR_NACKF_Pos (4U) +#define I2C_ISR_NACKF_Msk (0x1UL << I2C_ISR_NACKF_Pos) /*!< 0x00000010 */ +#define I2C_ISR_NACKF I2C_ISR_NACKF_Msk /*!< NACK received flag */ +#define I2C_ISR_STOPF_Pos (5U) +#define I2C_ISR_STOPF_Msk (0x1UL << I2C_ISR_STOPF_Pos) /*!< 0x00000020 */ +#define I2C_ISR_STOPF I2C_ISR_STOPF_Msk /*!< STOP detection flag */ +#define I2C_ISR_TC_Pos (6U) +#define I2C_ISR_TC_Msk (0x1UL << I2C_ISR_TC_Pos) /*!< 0x00000040 */ +#define I2C_ISR_TC I2C_ISR_TC_Msk /*!< Transfer complete (master mode) */ +#define I2C_ISR_TCR_Pos (7U) +#define I2C_ISR_TCR_Msk (0x1UL << I2C_ISR_TCR_Pos) /*!< 0x00000080 */ +#define I2C_ISR_TCR I2C_ISR_TCR_Msk /*!< Transfer complete reload */ +#define I2C_ISR_BERR_Pos (8U) +#define I2C_ISR_BERR_Msk (0x1UL << I2C_ISR_BERR_Pos) /*!< 0x00000100 */ +#define I2C_ISR_BERR I2C_ISR_BERR_Msk /*!< Bus error */ +#define I2C_ISR_ARLO_Pos (9U) +#define I2C_ISR_ARLO_Msk (0x1UL << I2C_ISR_ARLO_Pos) /*!< 0x00000200 */ +#define I2C_ISR_ARLO I2C_ISR_ARLO_Msk /*!< Arbitration lost */ +#define I2C_ISR_OVR_Pos (10U) +#define I2C_ISR_OVR_Msk (0x1UL << I2C_ISR_OVR_Pos) /*!< 0x00000400 */ +#define I2C_ISR_OVR I2C_ISR_OVR_Msk /*!< Overrun/Underrun */ +#define I2C_ISR_PECERR_Pos (11U) +#define I2C_ISR_PECERR_Msk (0x1UL << I2C_ISR_PECERR_Pos) /*!< 0x00000800 */ +#define I2C_ISR_PECERR I2C_ISR_PECERR_Msk /*!< PEC error in reception */ +#define I2C_ISR_TIMEOUT_Pos (12U) +#define I2C_ISR_TIMEOUT_Msk (0x1UL << I2C_ISR_TIMEOUT_Pos) /*!< 0x00001000 */ +#define I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT_Msk /*!< Timeout or Tlow detection flag */ +#define I2C_ISR_ALERT_Pos (13U) +#define I2C_ISR_ALERT_Msk (0x1UL << I2C_ISR_ALERT_Pos) /*!< 0x00002000 */ +#define I2C_ISR_ALERT I2C_ISR_ALERT_Msk /*!< SMBus alert */ +#define I2C_ISR_BUSY_Pos (15U) +#define I2C_ISR_BUSY_Msk (0x1UL << I2C_ISR_BUSY_Pos) /*!< 0x00008000 */ +#define I2C_ISR_BUSY I2C_ISR_BUSY_Msk /*!< Bus busy */ +#define I2C_ISR_DIR_Pos (16U) +#define I2C_ISR_DIR_Msk (0x1UL << I2C_ISR_DIR_Pos) /*!< 0x00010000 */ +#define I2C_ISR_DIR I2C_ISR_DIR_Msk /*!< Transfer direction (slave mode) */ +#define I2C_ISR_ADDCODE_Pos (17U) +#define I2C_ISR_ADDCODE_Msk (0x7FUL << I2C_ISR_ADDCODE_Pos) /*!< 0x00FE0000 */ +#define I2C_ISR_ADDCODE I2C_ISR_ADDCODE_Msk /*!< Address match code (slave mode) */ + +/****************** Bit definition for I2C_ICR register *********************/ +#define I2C_ICR_ADDRCF_Pos (3U) +#define I2C_ICR_ADDRCF_Msk (0x1UL << I2C_ICR_ADDRCF_Pos) /*!< 0x00000008 */ +#define I2C_ICR_ADDRCF I2C_ICR_ADDRCF_Msk /*!< Address matched clear flag */ +#define I2C_ICR_NACKCF_Pos (4U) +#define I2C_ICR_NACKCF_Msk (0x1UL << I2C_ICR_NACKCF_Pos) /*!< 0x00000010 */ +#define I2C_ICR_NACKCF I2C_ICR_NACKCF_Msk /*!< NACK clear flag */ +#define I2C_ICR_STOPCF_Pos (5U) +#define I2C_ICR_STOPCF_Msk (0x1UL << I2C_ICR_STOPCF_Pos) /*!< 0x00000020 */ +#define I2C_ICR_STOPCF I2C_ICR_STOPCF_Msk /*!< STOP detection clear flag */ +#define I2C_ICR_BERRCF_Pos (8U) +#define I2C_ICR_BERRCF_Msk (0x1UL << I2C_ICR_BERRCF_Pos) /*!< 0x00000100 */ +#define I2C_ICR_BERRCF I2C_ICR_BERRCF_Msk /*!< Bus error clear flag */ +#define I2C_ICR_ARLOCF_Pos (9U) +#define I2C_ICR_ARLOCF_Msk (0x1UL << I2C_ICR_ARLOCF_Pos) /*!< 0x00000200 */ +#define I2C_ICR_ARLOCF I2C_ICR_ARLOCF_Msk /*!< Arbitration lost clear flag */ +#define I2C_ICR_OVRCF_Pos (10U) +#define I2C_ICR_OVRCF_Msk (0x1UL << I2C_ICR_OVRCF_Pos) /*!< 0x00000400 */ +#define I2C_ICR_OVRCF I2C_ICR_OVRCF_Msk /*!< Overrun/Underrun clear flag */ +#define I2C_ICR_PECCF_Pos (11U) +#define I2C_ICR_PECCF_Msk (0x1UL << I2C_ICR_PECCF_Pos) /*!< 0x00000800 */ +#define I2C_ICR_PECCF I2C_ICR_PECCF_Msk /*!< PAC error clear flag */ +#define I2C_ICR_TIMOUTCF_Pos (12U) +#define I2C_ICR_TIMOUTCF_Msk (0x1UL << I2C_ICR_TIMOUTCF_Pos) /*!< 0x00001000 */ +#define I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF_Msk /*!< Timeout clear flag */ +#define I2C_ICR_ALERTCF_Pos (13U) +#define I2C_ICR_ALERTCF_Msk (0x1UL << I2C_ICR_ALERTCF_Pos) /*!< 0x00002000 */ +#define I2C_ICR_ALERTCF I2C_ICR_ALERTCF_Msk /*!< Alert clear flag */ + +/****************** Bit definition for I2C_PECR register *********************/ +#define I2C_PECR_PEC_Pos (0U) +#define I2C_PECR_PEC_Msk (0xFFUL << I2C_PECR_PEC_Pos) /*!< 0x000000FF */ +#define I2C_PECR_PEC I2C_PECR_PEC_Msk /*!< PEC register */ + +/****************** Bit definition for I2C_RXDR register *********************/ +#define I2C_RXDR_RXDATA_Pos (0U) +#define I2C_RXDR_RXDATA_Msk (0xFFUL << I2C_RXDR_RXDATA_Pos) /*!< 0x000000FF */ +#define I2C_RXDR_RXDATA I2C_RXDR_RXDATA_Msk /*!< 8-bit receive data */ + +/****************** Bit definition for I2C_TXDR register *********************/ +#define I2C_TXDR_TXDATA_Pos (0U) +#define I2C_TXDR_TXDATA_Msk (0xFFUL << I2C_TXDR_TXDATA_Pos) /*!< 0x000000FF */ +#define I2C_TXDR_TXDATA I2C_TXDR_TXDATA_Msk /*!< 8-bit transmit data */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY_Pos (0U) +#define IWDG_KR_KEY_Msk (0xFFFFUL << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ +#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*!<Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR_Pos (0U) +#define IWDG_PR_PR_Msk (0x7UL << IWDG_PR_PR_Pos) /*!< 0x00000007 */ +#define IWDG_PR_PR IWDG_PR_PR_Msk /*!<PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 (0x1U << IWDG_PR_PR_Pos) /*!< 0x00000001 */ +#define IWDG_PR_PR_1 (0x2U << IWDG_PR_PR_Pos) /*!< 0x00000002 */ +#define IWDG_PR_PR_2 (0x4U << IWDG_PR_PR_Pos) /*!< 0x00000004 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL_Pos (0U) +#define IWDG_RLR_RL_Msk (0xFFFUL << IWDG_RLR_RL_Pos) /*!< 0x00000FFF */ +#define IWDG_RLR_RL IWDG_RLR_RL_Msk /*!<Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU_Pos (0U) +#define IWDG_SR_PVU_Msk (0x1UL << IWDG_SR_PVU_Pos) /*!< 0x00000001 */ +#define IWDG_SR_PVU IWDG_SR_PVU_Msk /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU_Pos (1U) +#define IWDG_SR_RVU_Msk (0x1UL << IWDG_SR_RVU_Pos) /*!< 0x00000002 */ +#define IWDG_SR_RVU IWDG_SR_RVU_Msk /*!< Watchdog counter reload value update */ +#define IWDG_SR_WVU_Pos (2U) +#define IWDG_SR_WVU_Msk (0x1UL << IWDG_SR_WVU_Pos) /*!< 0x00000004 */ +#define IWDG_SR_WVU IWDG_SR_WVU_Msk /*!< Watchdog counter window value update */ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_WINR_WIN_Pos (0U) +#define IWDG_WINR_WIN_Msk (0xFFFUL << IWDG_WINR_WIN_Pos) /*!< 0x00000FFF */ +#define IWDG_WINR_WIN IWDG_WINR_WIN_Msk /*!< Watchdog counter window value */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR1 register ********************/ +#define PWR_CR1_LPMS_Pos (0U) +#define PWR_CR1_LPMS_Msk (0x7UL << PWR_CR1_LPMS_Pos) /*!< 0x00000007 */ +#define PWR_CR1_LPMS PWR_CR1_LPMS_Msk /*!< Low Power Mode Selection for CPU1 */ +#define PWR_CR1_LPMS_0 (0x1U << PWR_CR1_LPMS_Pos) /*!< 0x00000001 */ +#define PWR_CR1_LPMS_1 (0x2U << PWR_CR1_LPMS_Pos) /*!< 0x00000002 */ +#define PWR_CR1_LPMS_2 (0x4U << PWR_CR1_LPMS_Pos) /*!< 0x00000004 */ + +#define PWR_CR1_FPDR_Pos (4U) +#define PWR_CR1_FPDR_Msk (0x1UL << PWR_CR1_FPDR_Pos) /*!< 0x00000010 */ +#define PWR_CR1_FPDR PWR_CR1_FPDR_Msk /*!< Flash power down mode during LPrun for CPU1 */ + +#define PWR_CR1_FPDS_Pos (5U) +#define PWR_CR1_FPDS_Msk (0x1UL << PWR_CR1_FPDS_Pos) /*!< 0x00000020 */ +#define PWR_CR1_FPDS PWR_CR1_FPDS_Msk /*!< Flash power down mode during LPsleep for CPU1 */ + +#define PWR_CR1_DBP_Pos (8U) +#define PWR_CR1_DBP_Msk (0x1UL << PWR_CR1_DBP_Pos) /*!< 0x00000100 */ +#define PWR_CR1_DBP PWR_CR1_DBP_Msk /*!< Disable Backup Domain write protection */ + +#define PWR_CR1_LPR_Pos (14U) +#define PWR_CR1_LPR_Msk (0x1UL << PWR_CR1_LPR_Pos) /*!< 0x00004000 */ +#define PWR_CR1_LPR PWR_CR1_LPR_Msk /*!< Regulator Low-Power Run mode */ + +/******************** Bit definition for PWR_CR2 register ********************/ +#define PWR_CR2_PVDE_Pos (0U) +#define PWR_CR2_PVDE_Msk (0x1UL << PWR_CR2_PVDE_Pos) /*!< 0x00000001 */ +#define PWR_CR2_PVDE PWR_CR2_PVDE_Msk /*!< Power voltage detector enable */ + +#define PWR_CR2_PLS_Pos (1U) +#define PWR_CR2_PLS_Msk (0x7UL << PWR_CR2_PLS_Pos) /*!< 0x0000000E */ +#define PWR_CR2_PLS PWR_CR2_PLS_Msk /*!< Power voltage detector level selection */ +#define PWR_CR2_PLS_0 (0x1U << PWR_CR2_PLS_Pos) /*!< 0x00000002 */ +#define PWR_CR2_PLS_1 (0x2U << PWR_CR2_PLS_Pos) /*!< 0x00000004 */ +#define PWR_CR2_PLS_2 (0x4U << PWR_CR2_PLS_Pos) /*!< 0x00000008 */ + +#define PWR_CR2_PVME_Pos (4U) +#define PWR_CR2_PVME_Msk (0x4UL << PWR_CR2_PVME_Pos) /*!< 0x00000040 */ +#define PWR_CR2_PVME PWR_CR2_PVME_Msk /*!< Peripherical Voltage Monitor Enable for all power domains */ +#define PWR_CR2_PVME3_Pos (6U) +#define PWR_CR2_PVME3_Msk (0x1UL << PWR_CR2_PVME3_Pos) /*!< 0x00000040 */ +#define PWR_CR2_PVME3 PWR_CR2_PVME3_Msk /*!< Peripherical Voltage Monitor Vdda Enable */ + +/******************** Bit definition for PWR_CR3 register ********************/ +#define PWR_CR3_EWUP_Pos (0U) +#define PWR_CR3_EWUP_Msk (0x09UL << PWR_CR3_EWUP_Pos) /*!< 0x00000009 */ +#define PWR_CR3_EWUP PWR_CR3_EWUP_Msk /*!< Enable all external Wake-Up lines */ +#define PWR_CR3_EWUP1_Pos (0U) +#define PWR_CR3_EWUP1_Msk (0x1UL << PWR_CR3_EWUP1_Pos) /*!< 0x00000001 */ +#define PWR_CR3_EWUP1 PWR_CR3_EWUP1_Msk /*!< Enable external WKUP Pin 1 [line 0] */ +#define PWR_CR3_EWUP4_Pos (3U) +#define PWR_CR3_EWUP4_Msk (0x1UL << PWR_CR3_EWUP4_Pos) /*!< 0x00000008 */ +#define PWR_CR3_EWUP4 PWR_CR3_EWUP4_Msk /*!< Enable external WKUP Pin 4 [line 3] */ + +#define PWR_CR3_EBORHSMPSFB_Pos (8U) +#define PWR_CR3_EBORHSMPSFB_Msk (0x1UL << PWR_CR3_EBORHSMPSFB_Pos) /*!< 0x00000100 */ +#define PWR_CR3_EBORHSMPSFB PWR_CR3_EBORHSMPSFB_Msk /*!< BORH and SMPS Step Down converter forced in Bypass interrupts for CPU1 */ + +#define PWR_CR3_RRS_Pos (9U) +#define PWR_CR3_RRS_Msk (0x1UL << PWR_CR3_RRS_Pos) /*!< 0x00000200 */ +#define PWR_CR3_RRS PWR_CR3_RRS_Msk /*!< SRAM2 retention in STANDBY mode */ + +#define PWR_CR3_APC_Pos (10U) +#define PWR_CR3_APC_Msk (0x1UL << PWR_CR3_APC_Pos) /*!< 0x00000400 */ +#define PWR_CR3_APC PWR_CR3_APC_Msk /*!< Apply pull-up and pull-down configuration for CPU1 */ + +#define PWR_CR3_ECRPE_Pos (11U) +#define PWR_CR3_ECRPE_Msk (0x1UL << PWR_CR3_ECRPE_Pos) /*!< 0x00000800 */ +#define PWR_CR3_ECRPE PWR_CR3_ECRPE_Msk /*!< Critical radio phase end of activity interrupt for CPU1 */ +#define PWR_CR3_EBLEA_Pos (12U) +#define PWR_CR3_EBLEA_Msk (0x1UL << PWR_CR3_EBLEA_Pos) /*!< 0x00010000 */ +#define PWR_CR3_EBLEA PWR_CR3_EBLEA_Msk /*!< BLE end of activity interrupt for CPU1 */ +#define PWR_CR3_EC2H_Pos (14U) +#define PWR_CR3_EC2H_Msk (0x1UL << PWR_CR3_EC2H_Pos) /*!< 0x00040000 */ +#define PWR_CR3_EC2H PWR_CR3_EC2H_Msk /*!< CPU2 Hold interrupt for CPU1 */ + +#define PWR_CR3_EIWUL_Pos (15U) +#define PWR_CR3_EIWUL_Msk (0x1UL << PWR_CR3_EIWUL_Pos) /*!< 0x00080000 */ +#define PWR_CR3_EIWUL PWR_CR3_EIWUL_Msk /*!< Internal Wake-Up line interrupt for CPU1 */ + +/******************** Bit definition for PWR_CR4 register ********************/ +#define PWR_CR4_WP_Pos (0U) +#define PWR_CR4_WP_Msk (0x09UL << PWR_CR4_WP_Pos) /*!< 0x00000009 */ +#define PWR_CR4_WP PWR_CR4_WP_Msk /*!< Wake-Up polarity for all pins */ +#define PWR_CR4_WP1_Pos (0U) +#define PWR_CR4_WP1_Msk (0x1UL << PWR_CR4_WP1_Pos) /*!< 0x00000001 */ +#define PWR_CR4_WP1 PWR_CR4_WP1_Msk /*!< Wake-Up Pin 1 [line 0] polarity */ +#define PWR_CR4_WP4_Pos (3U) +#define PWR_CR4_WP4_Msk (0x1UL << PWR_CR4_WP4_Pos) /*!< 0x00000008 */ +#define PWR_CR4_WP4 PWR_CR4_WP4_Msk /*!< Wake-Up Pin 4 [line 3] polarity */ + +#define PWR_CR4_VBE_Pos (8U) +#define PWR_CR4_VBE_Msk (0x1UL << PWR_CR4_VBE_Pos) /*!< 0x00000100 */ +#define PWR_CR4_VBE PWR_CR4_VBE_Msk /*!< VBAT battery charging enable */ +#define PWR_CR4_VBRS_Pos (9U) +#define PWR_CR4_VBRS_Msk (0x1UL << PWR_CR4_VBRS_Pos) /*!< 0x00000200 */ +#define PWR_CR4_VBRS PWR_CR4_VBRS_Msk /*!< VBAT battery charging resistor selection */ + +#define PWR_CR4_C2BOOT_Pos (15U) +#define PWR_CR4_C2BOOT_Msk (0x1UL << PWR_CR4_C2BOOT_Pos) /*!< 0x00008000 */ +#define PWR_CR4_C2BOOT PWR_CR4_C2BOOT_Msk /*!< Boot CPU2 after reset or wakeup from Stop or Standby modes */ + +/******************** Bit definition for PWR_SR1 register ********************/ +#define PWR_SR1_WUF_Pos (0U) +#define PWR_SR1_WUF_Msk (0x09UL << PWR_SR1_WUF_Pos) /*!< 0x00000009 */ +#define PWR_SR1_WUF PWR_SR1_WUF_Msk /*!< Wakeup Flags of all pins */ +#define PWR_SR1_WUF1_Pos (0U) +#define PWR_SR1_WUF1_Msk (0x1UL << PWR_SR1_WUF1_Pos) /*!< 0x00000001 */ +#define PWR_SR1_WUF1 PWR_SR1_WUF1_Msk /*!< Wakeup Pin 1 [Flag 0] */ +#define PWR_SR1_WUF4_Pos (3U) +#define PWR_SR1_WUF4_Msk (0x1UL << PWR_SR1_WUF4_Pos) /*!< 0x00000008 */ +#define PWR_SR1_WUF4 PWR_SR1_WUF4_Msk /*!< Wakeup Pin 4 [Flag 3] */ + +#define PWR_SR1_SMPSFBF_Pos (7U) +#define PWR_SR1_SMPSFBF_Msk (0x1UL << PWR_SR1_SMPSFBF_Pos) /*!< 0x00000100 */ +#define PWR_SR1_SMPSFBF PWR_SR1_SMPSFBF_Msk /*!< SMPS Step Down converter forced in bypass mode interrupt flag */ + +#define PWR_SR1_BORHF_Pos (8U) +#define PWR_SR1_BORHF_Msk (0x1UL << PWR_SR1_BORHF_Pos) /*!< 0x00000100 */ +#define PWR_SR1_BORHF PWR_SR1_BORHF_Msk /*!< BORH interrupt flag */ + +#define PWR_SR1_BLEWUF_Pos (9U) +#define PWR_SR1_BLEWUF_Msk (0x1UL << PWR_SR1_BLEWUF_Pos) /*!< 0x00000200 */ +#define PWR_SR1_BLEWUF PWR_SR1_BLEWUF_Msk /*!< BLE wakeup interrupt flag */ + +#define PWR_SR1_CRPEF_Pos (11U) +#define PWR_SR1_CRPEF_Msk (0x1UL << PWR_SR1_CRPEF_Pos) /*!< 0x00000800 */ +#define PWR_SR1_CRPEF PWR_SR1_CRPEF_Msk /*!< Critical radio phase end of activity interrupt flag */ +#define PWR_SR1_BLEAF_Pos (12U) +#define PWR_SR1_BLEAF_Msk (0x1UL << PWR_SR1_BLEAF_Pos) /*!< 0x00001000 */ +#define PWR_SR1_BLEAF PWR_SR1_BLEAF_Msk /*!< BLE end of activity interrupt flag */ + +#define PWR_SR1_C2HF_Pos (14U) +#define PWR_SR1_C2HF_Msk (0x1UL << PWR_SR1_C2HF_Pos) /*!< 0x00004000 */ +#define PWR_SR1_C2HF PWR_SR1_C2HF_Msk /*!< CPU2 Hold interrupt flag */ + +#define PWR_SR1_WUFI_Pos (15U) +#define PWR_SR1_WUFI_Msk (0x1UL << PWR_SR1_WUFI_Pos) /*!< 0x00008000 */ +#define PWR_SR1_WUFI PWR_SR1_WUFI_Msk /*!< Internal wakeup interrupt flag */ + +/******************** Bit definition for PWR_SR2 register ********************/ +#define PWR_SR2_SMPSBF_Pos (0U) +#define PWR_SR2_SMPSBF_Msk (0x1UL << PWR_SR2_SMPSBF_Pos) /*!< 0x00000001 */ +#define PWR_SR2_SMPSBF PWR_SR2_SMPSBF_Msk /*!< SMPS step down converter in operating mode bypass flag */ +#define PWR_SR2_SMPSF_Pos (1U) +#define PWR_SR2_SMPSF_Msk (0x1UL << PWR_SR2_SMPSF_Pos) /*!< 0x00000002 */ +#define PWR_SR2_SMPSF PWR_SR2_SMPSF_Msk /*!< SMPS step down converter in operating mode step down flag */ + +#define PWR_SR2_REGLPS_Pos (8U) +#define PWR_SR2_REGLPS_Msk (0x1UL << PWR_SR2_REGLPS_Pos) /*!< 0x00000100 */ +#define PWR_SR2_REGLPS PWR_SR2_REGLPS_Msk /*!< Low-power regulator started */ +#define PWR_SR2_REGLPF_Pos (9U) +#define PWR_SR2_REGLPF_Msk (0x1UL << PWR_SR2_REGLPF_Pos) /*!< 0x00000200 */ +#define PWR_SR2_REGLPF PWR_SR2_REGLPF_Msk /*!< Low-power regulator flag */ + +#define PWR_SR2_PVDO_Pos (11U) +#define PWR_SR2_PVDO_Msk (0x1UL << PWR_SR2_PVDO_Pos) /*!< 0x00000800 */ +#define PWR_SR2_PVDO PWR_SR2_PVDO_Msk /*!< Power voltage detector output */ + +#define PWR_SR2_PVMO3_Pos (14U) +#define PWR_SR2_PVMO3_Msk (0x1UL << PWR_SR2_PVMO3_Pos) /*!< 0x00004000 */ +#define PWR_SR2_PVMO3 PWR_SR2_PVMO3_Msk /*!< Peripheral voltage monitor output 3: VDDA vs. 1.62V */ + +/******************** Bit definition for PWR_SCR register ********************/ +#define PWR_SCR_CWUF_Pos (0U) +#define PWR_SCR_CWUF_Msk (0x09UL << PWR_SCR_CWUF_Pos) /*!< 0x00000009 */ +#define PWR_SCR_CWUF PWR_SCR_CWUF_Msk /*!< Clear Wake-up Flags for all pins */ +#define PWR_SCR_CWUF1_Pos (0U) +#define PWR_SCR_CWUF1_Msk (0x1UL << PWR_SCR_CWUF1_Pos) /*!< 0x00000001 */ +#define PWR_SCR_CWUF1 PWR_SCR_CWUF1_Msk /*!< Clear Wake-up Pin 1 [Flag 0] */ +#define PWR_SCR_CWUF4_Pos (3U) +#define PWR_SCR_CWUF4_Msk (0x1UL << PWR_SCR_CWUF4_Pos) /*!< 0x00000008 */ +#define PWR_SCR_CWUF4 PWR_SCR_CWUF4_Msk /*!< Clear Wake-up Pin 4 [Flag 3] */ + +#define PWR_SCR_CSMPSFBF_Pos (7U) +#define PWR_SCR_CSMPSFBF_Msk (0x1UL << PWR_SCR_CSMPSFBF_Pos) /*!< 0x00000080 */ +#define PWR_SCR_CSMPSFBF PWR_SCR_CSMPSFBF_Msk /*!< Clear SMPS Step Down converter forced in bypass mode interrupt flag */ + +#define PWR_SCR_CBORHF_Pos (8U) +#define PWR_SCR_CBORHF_Msk (0x1UL << PWR_SCR_CBORHF_Pos) /*!< 0x00000100 */ +#define PWR_SCR_CBORHF PWR_SCR_CBORHF_Msk /*!< Clear BORH interrupt flag */ + +#define PWR_SCR_CBLEWUF_Pos (9U) +#define PWR_SCR_CBLEWUF_Msk (0x1UL << PWR_SCR_CBLEWUF_Pos) /*!< 0x00000200 */ +#define PWR_SCR_CBLEWUF PWR_SCR_CBLEWUF_Msk /*!< Clear BLE wakeup interrupt flag */ + +#define PWR_SCR_CCRPEF_Pos (11U) +#define PWR_SCR_CCRPEF_Msk (0x1UL << PWR_SCR_CCRPEF_Pos) /*!< 0x00000800 */ +#define PWR_SCR_CCRPEF PWR_SCR_CCRPEF_Msk /*!< Clear Critical radio phase end of activity interrupt flag */ +#define PWR_SCR_CBLEAF_Pos (12U) +#define PWR_SCR_CBLEAF_Msk (0x1UL << PWR_SCR_CBLEAF_Pos) /*!< 0x00001000 */ +#define PWR_SCR_CBLEAF PWR_SCR_CBLEAF_Msk /*!< Clear BLE end of activity interrupt flag */ + +#define PWR_SCR_CC2HF_Pos (14U) +#define PWR_SCR_CC2HF_Msk (0x1UL << PWR_SCR_CC2HF_Pos) /*!< 0x00004000 */ +#define PWR_SCR_CC2HF PWR_SCR_CC2HF_Msk /*!< Clear CPU2 Hold interrupt flag */ + +/******************** Bit definition for PWR_CR5 register ********************/ +#define PWR_CR5_SMPSVOS_Pos (0U) +#define PWR_CR5_SMPSVOS_Msk (0xFUL << PWR_CR5_SMPSVOS_Pos) /*!< 0x0000000F */ +#define PWR_CR5_SMPSVOS PWR_CR5_SMPSVOS_Msk /*!< SMPS step down converter voltage output scaling voltage level */ +#define PWR_CR5_SMPSVOS_0 (0x01U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000001 */ +#define PWR_CR5_SMPSVOS_1 (0x02U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000002 */ +#define PWR_CR5_SMPSVOS_2 (0x04U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000004 */ +#define PWR_CR5_SMPSVOS_3 (0x08U << PWR_CR5_SMPSVOS_Pos) /*!< 0x00000008 */ + +#define PWR_CR5_SMPSSC_Pos (4U) +#define PWR_CR5_SMPSSC_Msk (0x7UL << PWR_CR5_SMPSSC_Pos) /*!< 0x00000070 */ +#define PWR_CR5_SMPSSC PWR_CR5_SMPSSC_Msk /*!< SMPS step down converter supply startup current selection */ +#define PWR_CR5_SMPSSC_0 (0x01U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000010 */ +#define PWR_CR5_SMPSSC_1 (0x02U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000020 */ +#define PWR_CR5_SMPSSC_2 (0x04U << PWR_CR5_SMPSSC_Pos) /*!< 0x00000040 */ + +#define PWR_CR5_BORHC_Pos (8U) +#define PWR_CR5_BORHC_Msk (0x1UL << PWR_CR5_BORHC_Pos) /*!< 0x00000100 */ +#define PWR_CR5_BORHC PWR_CR5_BORHC_Msk /*!< BORH configuration selection */ + +#define PWR_CR5_SMPSEN_Pos (15U) +#define PWR_CR5_SMPSEN_Msk (0x1UL << PWR_CR5_SMPSEN_Pos) /*!< 0x00008000 */ +#define PWR_CR5_SMPSEN PWR_CR5_SMPSEN_Msk /*!< Enable SMPS Step Down converter SMPS mode enable */ + +/******************** Bit definition for PWR_PUCRA register *****************/ +#define PWR_PUCRA_PA0_Pos (0U) +#define PWR_PUCRA_PA0_Msk (0x1UL << PWR_PUCRA_PA0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRA_PA0 PWR_PUCRA_PA0_Msk /*!< Pin PA0 Pull-Up set */ +#define PWR_PUCRA_PA1_Pos (1U) +#define PWR_PUCRA_PA1_Msk (0x1UL << PWR_PUCRA_PA1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRA_PA1 PWR_PUCRA_PA1_Msk /*!< Pin PA1 Pull-Up set */ +#define PWR_PUCRA_PA2_Pos (2U) +#define PWR_PUCRA_PA2_Msk (0x1UL << PWR_PUCRA_PA2_Pos) /*!< 0x00000004 */ +#define PWR_PUCRA_PA2 PWR_PUCRA_PA2_Msk /*!< Pin PA2 Pull-Up set */ +#define PWR_PUCRA_PA3_Pos (3U) +#define PWR_PUCRA_PA3_Msk (0x1UL << PWR_PUCRA_PA3_Pos) /*!< 0x00000008 */ +#define PWR_PUCRA_PA3 PWR_PUCRA_PA3_Msk /*!< Pin PA3 Pull-Up set */ +#define PWR_PUCRA_PA4_Pos (4U) +#define PWR_PUCRA_PA4_Msk (0x1UL << PWR_PUCRA_PA4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRA_PA4 PWR_PUCRA_PA4_Msk /*!< Pin PA4 Pull-Up set */ +#define PWR_PUCRA_PA5_Pos (5U) +#define PWR_PUCRA_PA5_Msk (0x1UL << PWR_PUCRA_PA5_Pos) /*!< 0x00000020 */ +#define PWR_PUCRA_PA5 PWR_PUCRA_PA5_Msk /*!< Pin PA5 Pull-Up set */ +#define PWR_PUCRA_PA6_Pos (6U) +#define PWR_PUCRA_PA6_Msk (0x1UL << PWR_PUCRA_PA6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRA_PA6 PWR_PUCRA_PA6_Msk /*!< Pin PA6 Pull-Up set */ +#define PWR_PUCRA_PA7_Pos (7U) +#define PWR_PUCRA_PA7_Msk (0x1UL << PWR_PUCRA_PA7_Pos) /*!< 0x00000080 */ +#define PWR_PUCRA_PA7 PWR_PUCRA_PA7_Msk /*!< Pin PA7 Pull-Up set */ +#define PWR_PUCRA_PA8_Pos (8U) +#define PWR_PUCRA_PA8_Msk (0x1UL << PWR_PUCRA_PA8_Pos) /*!< 0x00000100 */ +#define PWR_PUCRA_PA8 PWR_PUCRA_PA8_Msk /*!< Pin PA8 Pull-Up set */ +#define PWR_PUCRA_PA9_Pos (9U) +#define PWR_PUCRA_PA9_Msk (0x1UL << PWR_PUCRA_PA9_Pos) /*!< 0x00000200 */ +#define PWR_PUCRA_PA9 PWR_PUCRA_PA9_Msk /*!< Pin PA9 Pull-Up set */ +#define PWR_PUCRA_PA10_Pos (10U) +#define PWR_PUCRA_PA10_Msk (0x1UL << PWR_PUCRA_PA10_Pos) /*!< 0x00000400 */ +#define PWR_PUCRA_PA10 PWR_PUCRA_PA10_Msk /*!< Pin PA10 Pull-Up set */ +#define PWR_PUCRA_PA11_Pos (11U) +#define PWR_PUCRA_PA11_Msk (0x1UL << PWR_PUCRA_PA11_Pos) /*!< 0x00000800 */ +#define PWR_PUCRA_PA11 PWR_PUCRA_PA11_Msk /*!< Pin PA11 Pull-Up set */ +#define PWR_PUCRA_PA12_Pos (12U) +#define PWR_PUCRA_PA12_Msk (0x1UL << PWR_PUCRA_PA12_Pos) /*!< 0x00001000 */ +#define PWR_PUCRA_PA12 PWR_PUCRA_PA12_Msk /*!< Pin PA12 Pull-Up set */ +#define PWR_PUCRA_PA13_Pos (13U) +#define PWR_PUCRA_PA13_Msk (0x1UL << PWR_PUCRA_PA13_Pos) /*!< 0x00002000 */ +#define PWR_PUCRA_PA13 PWR_PUCRA_PA13_Msk /*!< Pin PA13 Pull-Up set */ +#define PWR_PUCRA_PA15_Pos (15U) +#define PWR_PUCRA_PA15_Msk (0x1UL << PWR_PUCRA_PA15_Pos) /*!< 0x00008000 */ +#define PWR_PUCRA_PA15 PWR_PUCRA_PA15_Msk /*!< Pin PA15 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRA register *****************/ +#define PWR_PDCRA_PA0_Pos (0U) +#define PWR_PDCRA_PA0_Msk (0x1UL << PWR_PDCRA_PA0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRA_PA0 PWR_PDCRA_PA0_Msk /*!< Pin PA0 Pull-Down set */ +#define PWR_PDCRA_PA1_Pos (1U) +#define PWR_PDCRA_PA1_Msk (0x1UL << PWR_PDCRA_PA1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRA_PA1 PWR_PDCRA_PA1_Msk /*!< Pin PA1 Pull-Down set */ +#define PWR_PDCRA_PA2_Pos (2U) +#define PWR_PDCRA_PA2_Msk (0x1UL << PWR_PDCRA_PA2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRA_PA2 PWR_PDCRA_PA2_Msk /*!< Pin PA2 Pull-Down set */ +#define PWR_PDCRA_PA3_Pos (3U) +#define PWR_PDCRA_PA3_Msk (0x1UL << PWR_PDCRA_PA3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRA_PA3 PWR_PDCRA_PA3_Msk /*!< Pin PA3 Pull-Down set */ +#define PWR_PDCRA_PA4_Pos (4U) +#define PWR_PDCRA_PA4_Msk (0x1UL << PWR_PDCRA_PA4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRA_PA4 PWR_PDCRA_PA4_Msk /*!< Pin PA4 Pull-Down set */ +#define PWR_PDCRA_PA5_Pos (5U) +#define PWR_PDCRA_PA5_Msk (0x1UL << PWR_PDCRA_PA5_Pos) /*!< 0x00000020 */ +#define PWR_PDCRA_PA5 PWR_PDCRA_PA5_Msk /*!< Pin PA5 Pull-Down set */ +#define PWR_PDCRA_PA6_Pos (6U) +#define PWR_PDCRA_PA6_Msk (0x1UL << PWR_PDCRA_PA6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRA_PA6 PWR_PDCRA_PA6_Msk /*!< Pin PA6 Pull-Down set */ +#define PWR_PDCRA_PA7_Pos (7U) +#define PWR_PDCRA_PA7_Msk (0x1UL << PWR_PDCRA_PA7_Pos) /*!< 0x00000080 */ +#define PWR_PDCRA_PA7 PWR_PDCRA_PA7_Msk /*!< Pin PA7 Pull-Down set */ +#define PWR_PDCRA_PA8_Pos (8U) +#define PWR_PDCRA_PA8_Msk (0x1UL << PWR_PDCRA_PA8_Pos) /*!< 0x00000100 */ +#define PWR_PDCRA_PA8 PWR_PDCRA_PA8_Msk /*!< Pin PA8 Pull-Down set */ +#define PWR_PDCRA_PA9_Pos (9U) +#define PWR_PDCRA_PA9_Msk (0x1UL << PWR_PDCRA_PA9_Pos) /*!< 0x00000200 */ +#define PWR_PDCRA_PA9 PWR_PDCRA_PA9_Msk /*!< Pin PA9 Pull-Down set */ +#define PWR_PDCRA_PA10_Pos (10U) +#define PWR_PDCRA_PA10_Msk (0x1UL << PWR_PDCRA_PA10_Pos) /*!< 0x00000400 */ +#define PWR_PDCRA_PA10 PWR_PDCRA_PA10_Msk /*!< Pin PA10 Pull-Down set */ +#define PWR_PDCRA_PA11_Pos (11U) +#define PWR_PDCRA_PA11_Msk (0x1UL << PWR_PDCRA_PA11_Pos) /*!< 0x00000800 */ +#define PWR_PDCRA_PA11 PWR_PDCRA_PA11_Msk /*!< Pin PA11 Pull-Down set */ +#define PWR_PDCRA_PA12_Pos (12U) +#define PWR_PDCRA_PA12_Msk (0x1UL << PWR_PDCRA_PA12_Pos) /*!< 0x00001000 */ +#define PWR_PDCRA_PA12 PWR_PDCRA_PA12_Msk /*!< Pin PA12 Pull-Down set */ +#define PWR_PDCRA_PA14_Pos (14U) +#define PWR_PDCRA_PA14_Msk (0x1UL << PWR_PDCRA_PA14_Pos) /*!< 0x00004000 */ +#define PWR_PDCRA_PA14 PWR_PDCRA_PA14_Msk /*!< Pin PA14 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRB register *****************/ +#define PWR_PUCRB_PB0_Pos (0U) +#define PWR_PUCRB_PB0_Msk (0x1UL << PWR_PUCRB_PB0_Pos) /*!< 0x00000001 */ +#define PWR_PUCRB_PB0 PWR_PUCRB_PB0_Msk /*!< Pin PB0 Pull-Up set */ +#define PWR_PUCRB_PB1_Pos (1U) +#define PWR_PUCRB_PB1_Msk (0x1UL << PWR_PUCRB_PB1_Pos) /*!< 0x00000002 */ +#define PWR_PUCRB_PB1 PWR_PUCRB_PB1_Msk /*!< Pin PB1 Pull-Up set */ +#define PWR_PUCRB_PB2_Pos (2U) +#define PWR_PUCRB_PB2_Msk (0x1UL << PWR_PUCRB_PB2_Pos) /*!< 0x00000004 */ +#define PWR_PUCRB_PB2 PWR_PUCRB_PB2_Msk /*!< Pin PB2 Pull-Up set */ +#define PWR_PUCRB_PB3_Pos (3U) +#define PWR_PUCRB_PB3_Msk (0x1UL << PWR_PUCRB_PB3_Pos) /*!< 0x00000008 */ +#define PWR_PUCRB_PB3 PWR_PUCRB_PB3_Msk /*!< Pin PB3 Pull-Up set */ +#define PWR_PUCRB_PB4_Pos (4U) +#define PWR_PUCRB_PB4_Msk (0x1UL << PWR_PUCRB_PB4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRB_PB4 PWR_PUCRB_PB4_Msk /*!< Pin PB4 Pull-Up set */ +#define PWR_PUCRB_PB5_Pos (5U) +#define PWR_PUCRB_PB5_Msk (0x1UL << PWR_PUCRB_PB5_Pos) /*!< 0x00000020 */ +#define PWR_PUCRB_PB5 PWR_PUCRB_PB5_Msk /*!< Pin PB5 Pull-Up set */ +#define PWR_PUCRB_PB6_Pos (6U) +#define PWR_PUCRB_PB6_Msk (0x1UL << PWR_PUCRB_PB6_Pos) /*!< 0x00000040 */ +#define PWR_PUCRB_PB6 PWR_PUCRB_PB6_Msk /*!< Pin PB6 Pull-Up set */ +#define PWR_PUCRB_PB7_Pos (7U) +#define PWR_PUCRB_PB7_Msk (0x1UL << PWR_PUCRB_PB7_Pos) /*!< 0x00000080 */ +#define PWR_PUCRB_PB7 PWR_PUCRB_PB7_Msk /*!< Pin PB7 Pull-Up set */ +#define PWR_PUCRB_PB8_Pos (8U) +#define PWR_PUCRB_PB8_Msk (0x1UL << PWR_PUCRB_PB8_Pos) /*!< 0x00000100 */ +#define PWR_PUCRB_PB8 PWR_PUCRB_PB8_Msk /*!< Pin PB8 Pull-Up set */ +#define PWR_PUCRB_PB9_Pos (9U) +#define PWR_PUCRB_PB9_Msk (0x1UL << PWR_PUCRB_PB9_Pos) /*!< 0x00000200 */ +#define PWR_PUCRB_PB9 PWR_PUCRB_PB9_Msk /*!< Pin PB9 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRB register *****************/ +#define PWR_PDCRB_PB0_Pos (0U) +#define PWR_PDCRB_PB0_Msk (0x1UL << PWR_PDCRB_PB0_Pos) /*!< 0x00000001 */ +#define PWR_PDCRB_PB0 PWR_PDCRB_PB0_Msk /*!< Pin PB0 Pull-Down set */ +#define PWR_PDCRB_PB1_Pos (1U) +#define PWR_PDCRB_PB1_Msk (0x1UL << PWR_PDCRB_PB1_Pos) /*!< 0x00000002 */ +#define PWR_PDCRB_PB1 PWR_PDCRB_PB1_Msk /*!< Pin PB1 Pull-Down set */ +#define PWR_PDCRB_PB2_Pos (2U) +#define PWR_PDCRB_PB2_Msk (0x1UL << PWR_PDCRB_PB2_Pos) /*!< 0x00000004 */ +#define PWR_PDCRB_PB2 PWR_PDCRB_PB2_Msk /*!< Pin PB2 Pull-Down set */ +#define PWR_PDCRB_PB3_Pos (3U) +#define PWR_PDCRB_PB3_Msk (0x1UL << PWR_PDCRB_PB3_Pos) /*!< 0x00000008 */ +#define PWR_PDCRB_PB3 PWR_PDCRB_PB3_Msk /*!< Pin PB3 Pull-Down set */ +#define PWR_PDCRB_PB5_Pos (5U) +#define PWR_PDCRB_PB5_Msk (0x1UL << PWR_PDCRB_PB5_Pos) /*!< 0x00000020 */ +#define PWR_PDCRB_PB5 PWR_PDCRB_PB5_Msk /*!< Pin PB5 Pull-Down set */ +#define PWR_PDCRB_PB6_Pos (6U) +#define PWR_PDCRB_PB6_Msk (0x1UL << PWR_PDCRB_PB6_Pos) /*!< 0x00000040 */ +#define PWR_PDCRB_PB6 PWR_PDCRB_PB6_Msk /*!< Pin PB6 Pull-Down set */ +#define PWR_PDCRB_PB7_Pos (7U) +#define PWR_PDCRB_PB7_Msk (0x1UL << PWR_PDCRB_PB7_Pos) /*!< 0x00000080 */ +#define PWR_PDCRB_PB7 PWR_PDCRB_PB7_Msk /*!< Pin PB7 Pull-Down set */ +#define PWR_PDCRB_PB8_Pos (8U) +#define PWR_PDCRB_PB8_Msk (0x1UL << PWR_PDCRB_PB8_Pos) /*!< 0x00000100 */ +#define PWR_PDCRB_PB8 PWR_PDCRB_PB8_Msk /*!< Pin PB8 Pull-Down set */ +#define PWR_PDCRB_PB9_Pos (9U) +#define PWR_PDCRB_PB9_Msk (0x1UL << PWR_PDCRB_PB9_Pos) /*!< 0x00000200 */ +#define PWR_PDCRB_PB9 PWR_PDCRB_PB9_Msk /*!< Pin PB9 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRC register *****************/ +#define PWR_PUCRC_PC14_Pos (14U) +#define PWR_PUCRC_PC14_Msk (0x1UL << PWR_PUCRC_PC14_Pos) /*!< 0x00004000 */ +#define PWR_PUCRC_PC14 PWR_PUCRC_PC14_Msk /*!< Pin PC14 Pull-Up set */ +#define PWR_PUCRC_PC15_Pos (15U) +#define PWR_PUCRC_PC15_Msk (0x1UL << PWR_PUCRC_PC15_Pos) /*!< 0x00008000 */ +#define PWR_PUCRC_PC15 PWR_PUCRC_PC15_Msk /*!< Pin PC15 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRC register *****************/ +#define PWR_PDCRC_PC14_Pos (14U) +#define PWR_PDCRC_PC14_Msk (0x1UL << PWR_PDCRC_PC14_Pos) /*!< 0x00004000 */ +#define PWR_PDCRC_PC14 PWR_PDCRC_PC14_Msk /*!< Pin PC14 Pull-Down set */ +#define PWR_PDCRC_PC15_Pos (15U) +#define PWR_PDCRC_PC15_Msk (0x1UL << PWR_PDCRC_PC15_Pos) /*!< 0x00008000 */ +#define PWR_PDCRC_PC15 PWR_PDCRC_PC15_Msk /*!< Pin PC15 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRE register *****************/ +#define PWR_PUCRE_PE4_Pos (4U) +#define PWR_PUCRE_PE4_Msk (0x1UL << PWR_PUCRE_PE4_Pos) /*!< 0x00000010 */ +#define PWR_PUCRE_PE4 PWR_PUCRE_PE4_Msk /*!< Pin PE4 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRE register *****************/ +#define PWR_PDCRE_PE4_Pos (4U) +#define PWR_PDCRE_PE4_Msk (0x1UL << PWR_PDCRE_PE4_Pos) /*!< 0x00000010 */ +#define PWR_PDCRE_PE4 PWR_PDCRE_PE4_Msk /*!< Pin PE4 Pull-Down set */ + +/******************** Bit definition for PWR_PUCRH register *****************/ +#define PWR_PUCRH_PH3_Pos (3U) +#define PWR_PUCRH_PH3_Msk (0x1UL << PWR_PUCRH_PH3_Pos) /*!< 0x00000004 */ +#define PWR_PUCRH_PH3 PWR_PUCRH_PH3_Msk /*!< Pin PH3 Pull-Up set */ + +/******************** Bit definition for PWR_PDCRH register *****************/ +#define PWR_PDCRH_PH3_Pos (3U) +#define PWR_PDCRH_PH3_Msk (0x1UL << PWR_PDCRH_PH3_Pos) /*!< 0x00000004 */ +#define PWR_PDCRH_PH3 PWR_PDCRH_PH3_Msk /*!< Pin PH3 Pull-Down set */ + +/******************** Bit definition for PWR_C2CR1 register ********************/ +#define PWR_C2CR1_LPMS_Pos (0U) +#define PWR_C2CR1_LPMS_Msk (0x7UL << PWR_C2CR1_LPMS_Pos) /*!< 0x00000007 */ +#define PWR_C2CR1_LPMS PWR_C2CR1_LPMS_Msk /*!< Low Power Mode Selection for CPU2 */ +#define PWR_C2CR1_LPMS_0 (0x1U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000001 */ +#define PWR_C2CR1_LPMS_1 (0x2U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000002 */ +#define PWR_C2CR1_LPMS_2 (0x4U << PWR_C2CR1_LPMS_Pos) /*!< 0x00000004 */ + +#define PWR_C2CR1_FPDR_Pos (4U) +#define PWR_C2CR1_FPDR_Msk (0x1UL << PWR_C2CR1_FPDR_Pos) /*!< 0x00000010 */ +#define PWR_C2CR1_FPDR PWR_C2CR1_FPDR_Msk /*!< Flash power down mode during LPrun for CPU2 */ + +#define PWR_C2CR1_FPDS_Pos (5U) +#define PWR_C2CR1_FPDS_Msk (0x1UL << PWR_C2CR1_FPDS_Pos) /*!< 0x00000020 */ +#define PWR_C2CR1_FPDS PWR_C2CR1_FPDS_Msk /*!< Flash power down mode during LPsleep for CPU2 */ + +#define PWR_C2CR1_BLEEWKUP_Pos (14U) +#define PWR_C2CR1_BLEEWKUP_Msk (0x1UL << PWR_C2CR1_BLEEWKUP_Pos) /*!< 0x00008000 */ +#define PWR_C2CR1_BLEEWKUP PWR_C2CR1_BLEEWKUP_Msk /*!< Radio BLE external wakeup signal */ + +/******************** Bit definition for PWR_C2CR3 register ********************/ +#define PWR_C2CR3_EWUP_Pos (0U) +#define PWR_C2CR3_EWUP_Msk (0x09UL << PWR_C2CR3_EWUP_Pos) /*!< 0x00000009 */ +#define PWR_C2CR3_EWUP PWR_C2CR3_EWUP_Msk /*!< Enable all external Wake-Up lines for CPU2 */ +#define PWR_C2CR3_EWUP1_Pos (0U) +#define PWR_C2CR3_EWUP1_Msk (0x1UL << PWR_C2CR3_EWUP1_Pos) /*!< 0x00000001 */ +#define PWR_C2CR3_EWUP1 PWR_C2CR3_EWUP1_Msk /*!< Enable external WKUP Pin 1 [line 0] for CPU2 */ +#define PWR_C2CR3_EWUP4_Pos (3U) +#define PWR_C2CR3_EWUP4_Msk (0x1UL << PWR_C2CR3_EWUP4_Pos) /*!< 0x00000008 */ +#define PWR_C2CR3_EWUP4 PWR_C2CR3_EWUP4_Msk /*!< Enable external WKUP Pin 4 [line 3] for CPU2 */ + +#define PWR_C2CR3_EBLEWUP_Pos (9U) +#define PWR_C2CR3_EBLEWUP_Msk (0x1UL << PWR_C2CR3_EBLEWUP_Pos) /*!< 0x00000200 */ +#define PWR_C2CR3_EBLEWUP PWR_C2CR3_EBLEWUP_Msk /*!< Enable BLE host wakeup interrupt for CPU2 */ + +#define PWR_C2CR3_APC_Pos (12U) +#define PWR_C2CR3_APC_Msk (0x1UL << PWR_C2CR3_APC_Pos) /*!< 0x00001000 */ +#define PWR_C2CR3_APC PWR_C2CR3_APC_Msk /*!< Apply pull-up and pull-down configuration for CPU2 */ + +#define PWR_C2CR3_EIWUL_Pos (15U) +#define PWR_C2CR3_EIWUL_Msk (0x1UL << PWR_C2CR3_EIWUL_Pos) /*!< 0x00008000 */ +#define PWR_C2CR3_EIWUL PWR_C2CR3_EIWUL_Msk /*!< Internal Wake-Up line interrupt for CPU2 */ + +/******************** Bit definition for PWR_EXTSCR register ********************/ +#define PWR_EXTSCR_C1CSSF_Pos (0U) +#define PWR_EXTSCR_C1CSSF_Msk (0x1UL << PWR_EXTSCR_C1CSSF_Pos) /*!< 0x00000001 */ +#define PWR_EXTSCR_C1CSSF PWR_EXTSCR_C1CSSF_Msk /*!< Clear standby and stop flags for CPU1 */ +#define PWR_EXTSCR_C2CSSF_Pos (1U) +#define PWR_EXTSCR_C2CSSF_Msk (0x1UL << PWR_EXTSCR_C2CSSF_Pos) /*!< 0x00000002 */ +#define PWR_EXTSCR_C2CSSF PWR_EXTSCR_C2CSSF_Msk /*!< Clear standby and stop flags for CPU2 */ +#define PWR_EXTSCR_CCRPF_Pos (2U) +#define PWR_EXTSCR_CCRPF_Msk (0x1UL << PWR_EXTSCR_CCRPF_Pos) /*!< 0x00000004 */ +#define PWR_EXTSCR_CCRPF PWR_EXTSCR_CCRPF_Msk /*!< Clear critical radio system phase flag */ + +#define PWR_EXTSCR_C1SBF_Pos (8U) +#define PWR_EXTSCR_C1SBF_Msk (0x1UL << PWR_EXTSCR_C1SBF_Pos) /*!< 0x00000100 */ +#define PWR_EXTSCR_C1SBF PWR_EXTSCR_C1SBF_Msk /*!< System standby flag for CPU1 */ +#define PWR_EXTSCR_C1STOPF_Pos (9U) +#define PWR_EXTSCR_C1STOPF_Msk (0x1UL << PWR_EXTSCR_C1STOPF_Pos) /*!< 0x00000200 */ +#define PWR_EXTSCR_C1STOPF PWR_EXTSCR_C1STOPF_Msk /*!< System stop flag for CPU1 */ +#define PWR_EXTSCR_C2SBF_Pos (10U) +#define PWR_EXTSCR_C2SBF_Msk (0x1UL << PWR_EXTSCR_C2SBF_Pos) /*!< 0x00000400 */ +#define PWR_EXTSCR_C2SBF PWR_EXTSCR_C2SBF_Msk /*!< System standby flag for CPU2 */ +#define PWR_EXTSCR_C2STOPF_Pos (11U) +#define PWR_EXTSCR_C2STOPF_Msk (0x1UL << PWR_EXTSCR_C2STOPF_Pos) /*!< 0x00000800 */ +#define PWR_EXTSCR_C2STOPF PWR_EXTSCR_C2STOPF_Msk /*!< System stop flag for CPU2 */ + +#define PWR_EXTSCR_CRPF_Pos (13U) +#define PWR_EXTSCR_CRPF_Msk (0x1UL << PWR_EXTSCR_CRPF_Pos) /*!< 0x00002000 */ +#define PWR_EXTSCR_CRPF PWR_EXTSCR_CRPF_Msk /*!< Critical radio system phase flag */ + +#define PWR_EXTSCR_C1DS_Pos (14U) +#define PWR_EXTSCR_C1DS_Msk (0x1UL << PWR_EXTSCR_C1DS_Pos) /*!< 0x00004000 */ +#define PWR_EXTSCR_C1DS PWR_EXTSCR_C1DS_Msk /*!< CPU1 deepsleep mode flag */ +#define PWR_EXTSCR_C2DS_Pos (15U) +#define PWR_EXTSCR_C2DS_Msk (0x1UL << PWR_EXTSCR_C2DS_Pos) /*!< 0x00008000 */ +#define PWR_EXTSCR_C2DS PWR_EXTSCR_C2DS_Msk /*!< CPU2 deepsleep mode flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define RCC_SMPS_SUPPORT + +/******************** Bit definition for RCC_CR register *****************/ +#define RCC_CR_MSION_Pos (0U) +#define RCC_CR_MSION_Msk (0x1UL << RCC_CR_MSION_Pos) /*!< 0x00000001 */ +#define RCC_CR_MSION RCC_CR_MSION_Msk /*!< Internal Multi Speed oscillator (MSI) clock enable */ +#define RCC_CR_MSIRDY_Pos (1U) +#define RCC_CR_MSIRDY_Msk (0x1UL << RCC_CR_MSIRDY_Pos) /*!< 0x00000002 */ +#define RCC_CR_MSIRDY RCC_CR_MSIRDY_Msk /*!< Internal Multi Speed oscillator (MSI) clock ready flag */ +#define RCC_CR_MSIPLLEN_Pos (2U) +#define RCC_CR_MSIPLLEN_Msk (0x1UL << RCC_CR_MSIPLLEN_Pos) /*!< 0x00000004 */ +#define RCC_CR_MSIPLLEN RCC_CR_MSIPLLEN_Msk /*!< Internal Multi Speed oscillator (MSI) PLL enable */ + +/*!< MSIRANGE configuration : 12 frequency ranges available */ +#define RCC_CR_MSIRANGE_Pos (4U) +#define RCC_CR_MSIRANGE_Msk (0xFUL << RCC_CR_MSIRANGE_Pos) /*!< 0x000000F0 */ +#define RCC_CR_MSIRANGE RCC_CR_MSIRANGE_Msk /*!< Internal Multi Speed oscillator (MSI) clock Range */ +#define RCC_CR_MSIRANGE_0 (0x0U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000000 */ +#define RCC_CR_MSIRANGE_1 (0x1U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000010 */ +#define RCC_CR_MSIRANGE_2 (0x2U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000020 */ +#define RCC_CR_MSIRANGE_3 (0x3U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000030 */ +#define RCC_CR_MSIRANGE_4 (0x4U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000040 */ +#define RCC_CR_MSIRANGE_5 (0x5U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000050 */ +#define RCC_CR_MSIRANGE_6 (0x6U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000060 */ +#define RCC_CR_MSIRANGE_7 (0x7U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000070 */ +#define RCC_CR_MSIRANGE_8 (0x8U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000080 */ +#define RCC_CR_MSIRANGE_9 (0x9U << RCC_CR_MSIRANGE_Pos) /*!< 0x00000090 */ +#define RCC_CR_MSIRANGE_10 (0xAU << RCC_CR_MSIRANGE_Pos) /*!< 0x000000A0 */ +#define RCC_CR_MSIRANGE_11 (0xBU << RCC_CR_MSIRANGE_Pos) /*!< 0x000000B0 */ + +#define RCC_CR_HSION_Pos (8U) +#define RCC_CR_HSION_Msk (0x1UL << RCC_CR_HSION_Pos) /*!< 0x00000100 */ +#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed oscillator (HSI16) clock enable */ +#define RCC_CR_HSIKERON_Pos (9U) +#define RCC_CR_HSIKERON_Msk (0x1UL << RCC_CR_HSIKERON_Pos) /*!< 0x00000200 */ +#define RCC_CR_HSIKERON RCC_CR_HSIKERON_Msk /*!< Internal High Speed oscillator (HSI16) clock enable for some IPs Kernel */ +#define RCC_CR_HSIRDY_Pos (10U) +#define RCC_CR_HSIRDY_Msk (0x1UL << RCC_CR_HSIRDY_Pos) /*!< 0x00000400 */ +#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed oscillator (HSI16) clock ready flag */ +#define RCC_CR_HSIASFS_Pos (11U) +#define RCC_CR_HSIASFS_Msk (0x1UL << RCC_CR_HSIASFS_Pos) /*!< 0x00000800 */ +#define RCC_CR_HSIASFS RCC_CR_HSIASFS_Msk /*!< HSI16 Automatic Start from Stop */ +#define RCC_CR_HSIKERDY_Pos (12U) +#define RCC_CR_HSIKERDY_Msk (0x1UL << RCC_CR_HSIKERDY_Pos) /*!< 0x00001000 */ +#define RCC_CR_HSIKERDY RCC_CR_HSIKERDY_Msk /*!< Internal High Speed oscillator (HSI16) clock enable for some IPs Kernel ready flag*/ + +#define RCC_CR_HSEON_Pos (16U) +#define RCC_CR_HSEON_Msk (0x1UL << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ +#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed oscillator (HSE) clock enable */ +#define RCC_CR_HSERDY_Pos (17U) +#define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ +#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed oscillator (HSE) clock ready */ +#define RCC_CR_CSSON_Pos (19U) +#define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ +#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< HSE Clock Security System enable */ +#define RCC_CR_HSEPRE_Pos (20U) +#define RCC_CR_HSEPRE_Msk (0x1UL << RCC_CR_HSEPRE_Pos) /*!< 0x00100000 */ +#define RCC_CR_HSEPRE RCC_CR_HSEPRE_Msk /*!< HSE sysclk prescaler */ + +#define RCC_CR_PLLON_Pos (24U) +#define RCC_CR_PLLON_Msk (0x1UL << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ +#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< System PLL clock enable */ +#define RCC_CR_PLLRDY_Pos (25U) +#define RCC_CR_PLLRDY_Msk (0x1UL << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ +#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< System PLL clock ready */ + +/******************** Bit definition for RCC_ICSCR register ***************/ +/*!< MSICAL configuration */ +#define RCC_ICSCR_MSICAL_Pos (0U) +#define RCC_ICSCR_MSICAL_Msk (0xFFUL << RCC_ICSCR_MSICAL_Pos) /*!< 0x000000FF */ +#define RCC_ICSCR_MSICAL RCC_ICSCR_MSICAL_Msk /*!< MSICAL[7:0] bits */ +#define RCC_ICSCR_MSICAL_0 (0x01U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000001 */ +#define RCC_ICSCR_MSICAL_1 (0x02U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000002 */ +#define RCC_ICSCR_MSICAL_2 (0x04U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000004 */ +#define RCC_ICSCR_MSICAL_3 (0x08U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000008 */ +#define RCC_ICSCR_MSICAL_4 (0x10U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000010 */ +#define RCC_ICSCR_MSICAL_5 (0x20U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000020 */ +#define RCC_ICSCR_MSICAL_6 (0x40U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000040 */ +#define RCC_ICSCR_MSICAL_7 (0x80U << RCC_ICSCR_MSICAL_Pos) /*!< 0x00000080 */ + +/*!< MSITRIM configuration */ +#define RCC_ICSCR_MSITRIM_Pos (8U) +#define RCC_ICSCR_MSITRIM_Msk (0xFFUL << RCC_ICSCR_MSITRIM_Pos) /*!< 0x0000FF00 */ +#define RCC_ICSCR_MSITRIM RCC_ICSCR_MSITRIM_Msk /*!< MSITRIM[7:0] bits */ +#define RCC_ICSCR_MSITRIM_0 (0x01U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000100 */ +#define RCC_ICSCR_MSITRIM_1 (0x02U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000200 */ +#define RCC_ICSCR_MSITRIM_2 (0x04U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000400 */ +#define RCC_ICSCR_MSITRIM_3 (0x08U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00000800 */ +#define RCC_ICSCR_MSITRIM_4 (0x10U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00001000 */ +#define RCC_ICSCR_MSITRIM_5 (0x20U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00002000 */ +#define RCC_ICSCR_MSITRIM_6 (0x40U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00004000 */ +#define RCC_ICSCR_MSITRIM_7 (0x80U << RCC_ICSCR_MSITRIM_Pos) /*!< 0x00008000 */ + +/*!< HSICAL configuration */ +#define RCC_ICSCR_HSICAL_Pos (16U) +#define RCC_ICSCR_HSICAL_Msk (0xFFUL << RCC_ICSCR_HSICAL_Pos) /*!< 0x00FF0000 */ +#define RCC_ICSCR_HSICAL RCC_ICSCR_HSICAL_Msk /*!< HSICAL[7:0] bits */ +#define RCC_ICSCR_HSICAL_0 (0x01U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00010000 */ +#define RCC_ICSCR_HSICAL_1 (0x02U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00020000 */ +#define RCC_ICSCR_HSICAL_2 (0x04U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00040000 */ +#define RCC_ICSCR_HSICAL_3 (0x08U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00080000 */ +#define RCC_ICSCR_HSICAL_4 (0x10U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00100000 */ +#define RCC_ICSCR_HSICAL_5 (0x20U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00200000 */ +#define RCC_ICSCR_HSICAL_6 (0x40U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00400000 */ +#define RCC_ICSCR_HSICAL_7 (0x80U << RCC_ICSCR_HSICAL_Pos) /*!< 0x00800000 */ + +/*!< HSITRIM configuration */ +#define RCC_ICSCR_HSITRIM_Pos (24U) +#define RCC_ICSCR_HSITRIM_Msk (0x7FUL << RCC_ICSCR_HSITRIM_Pos) /*!< 0x7F000000 */ +#define RCC_ICSCR_HSITRIM RCC_ICSCR_HSITRIM_Msk /*!< HSITRIM[6:0] bits */ +#define RCC_ICSCR_HSITRIM_0 (0x01U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x01000000 */ +#define RCC_ICSCR_HSITRIM_1 (0x02U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x02000000 */ +#define RCC_ICSCR_HSITRIM_2 (0x04U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x04000000 */ +#define RCC_ICSCR_HSITRIM_3 (0x08U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x08000000 */ +#define RCC_ICSCR_HSITRIM_4 (0x10U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x10000000 */ +#define RCC_ICSCR_HSITRIM_5 (0x20U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x20000000 */ +#define RCC_ICSCR_HSITRIM_6 (0x40U << RCC_ICSCR_HSITRIM_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_CFGR register ******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW_Pos (0U) +#define RCC_CFGR_SW_Msk (0x3UL << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ +#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 (0x1U << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ +#define RCC_CFGR_SW_1 (0x2U << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_Pos (2U) +#define RCC_CFGR_SWS_Msk (0x3UL << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ +#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 (0x1U << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ +#define RCC_CFGR_SWS_1 (0x2U << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_Pos (4U) +#define RCC_CFGR_HPRE_Msk (0xFUL << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 (0x1U << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ +#define RCC_CFGR_HPRE_1 (0x2U << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ +#define RCC_CFGR_HPRE_2 (0x4U << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ +#define RCC_CFGR_HPRE_3 (0x8U << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_Pos (8U) +#define RCC_CFGR_PPRE1_Msk (0x7UL << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ +#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 (0x1U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ +#define RCC_CFGR_PPRE1_1 (0x2U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ +#define RCC_CFGR_PPRE1_2 (0x4U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_Pos (11U) +#define RCC_CFGR_PPRE2_Msk (0x7UL << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ +#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 (0x1U << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ +#define RCC_CFGR_PPRE2_1 (0x2U << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ +#define RCC_CFGR_PPRE2_2 (0x4U << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ + +/*!< STOPWUCK configuration */ +#define RCC_CFGR_STOPWUCK_Pos (15U) +#define RCC_CFGR_STOPWUCK_Msk (0x1UL << RCC_CFGR_STOPWUCK_Pos) /*!< 0x00008000 */ +#define RCC_CFGR_STOPWUCK RCC_CFGR_STOPWUCK_Msk /*!< Wake Up from stop and CSS backup clock selection */ + +/*!< HPREF configuration */ +#define RCC_CFGR_HPREF_Pos (16U) +#define RCC_CFGR_HPREF_Msk (0x1UL << RCC_CFGR_HPREF_Pos) /*!< 0x00010000 */ +#define RCC_CFGR_HPREF RCC_CFGR_HPREF_Msk /*!< AHB prescaler flag */ + +/*!< PPRE1F configuration */ +#define RCC_CFGR_PPRE1F_Pos (17U) +#define RCC_CFGR_PPRE1F_Msk (0x1UL << RCC_CFGR_PPRE1F_Pos) /*!< 0x00020000 */ +#define RCC_CFGR_PPRE1F RCC_CFGR_PPRE1F_Msk /*!< CPU1 APB1 prescaler flag */ + +/*!< PPRE2F configuration */ +#define RCC_CFGR_PPRE2F_Pos (18U) +#define RCC_CFGR_PPRE2F_Msk (0x1UL << RCC_CFGR_PPRE2F_Pos) /*!< 0x00040000 */ +#define RCC_CFGR_PPRE2F RCC_CFGR_PPRE2F_Msk /*!< APB2 prescaler flag */ + +/*!< MCOSEL configuration */ +#define RCC_CFGR_MCOSEL_Pos (24U) +#define RCC_CFGR_MCOSEL_Msk (0xFUL << RCC_CFGR_MCOSEL_Pos) /*!< 0x0F000000 */ +#define RCC_CFGR_MCOSEL RCC_CFGR_MCOSEL_Msk /*!< MCOSEL [3:0] bits (Clock output selection) */ +#define RCC_CFGR_MCOSEL_0 (0x1U << RCC_CFGR_MCOSEL_Pos) /*!< 0x01000000 */ +#define RCC_CFGR_MCOSEL_1 (0x2U << RCC_CFGR_MCOSEL_Pos) /*!< 0x02000000 */ +#define RCC_CFGR_MCOSEL_2 (0x4U << RCC_CFGR_MCOSEL_Pos) /*!< 0x04000000 */ +#define RCC_CFGR_MCOSEL_3 (0x8U << RCC_CFGR_MCOSEL_Pos) /*!< 0x08000000 */ + +/*!< MCOPRE configuration */ +#define RCC_CFGR_MCOPRE_Pos (28U) +#define RCC_CFGR_MCOPRE_Msk (0x7UL << RCC_CFGR_MCOPRE_Pos) /*!< 0x70000000 */ +#define RCC_CFGR_MCOPRE RCC_CFGR_MCOPRE_Msk /*!< MCO prescaler */ +#define RCC_CFGR_MCOPRE_0 (0x1U << RCC_CFGR_MCOPRE_Pos) /*!< 0x10000000 */ +#define RCC_CFGR_MCOPRE_1 (0x2U << RCC_CFGR_MCOPRE_Pos) /*!< 0x20000000 */ +#define RCC_CFGR_MCOPRE_2 (0x4U << RCC_CFGR_MCOPRE_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for RCC_PLLCFGR register ***************/ +#define RCC_PLLCFGR_PLLSRC_Pos (0U) +#define RCC_PLLCFGR_PLLSRC_Msk (0x3UL << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000003 */ +#define RCC_PLLCFGR_PLLSRC RCC_PLLCFGR_PLLSRC_Msk +#define RCC_PLLCFGR_PLLSRC_0 (0x1U << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000001 */ +#define RCC_PLLCFGR_PLLSRC_1 (0x2U << RCC_PLLCFGR_PLLSRC_Pos) /*!< 0x00000002 */ + +#define RCC_PLLCFGR_PLLM_Pos (4U) +#define RCC_PLLCFGR_PLLM_Msk (0x7UL << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000070 */ +#define RCC_PLLCFGR_PLLM RCC_PLLCFGR_PLLM_Msk +#define RCC_PLLCFGR_PLLM_0 (0x1U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000010 */ +#define RCC_PLLCFGR_PLLM_1 (0x2U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000020 */ +#define RCC_PLLCFGR_PLLM_2 (0x4U << RCC_PLLCFGR_PLLM_Pos) /*!< 0x00000040 */ + +#define RCC_PLLCFGR_PLLN_Pos (8U) +#define RCC_PLLCFGR_PLLN_Msk (0x7FUL << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00007F00 */ +#define RCC_PLLCFGR_PLLN RCC_PLLCFGR_PLLN_Msk +#define RCC_PLLCFGR_PLLN_0 (0x01U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000100 */ +#define RCC_PLLCFGR_PLLN_1 (0x02U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000200 */ +#define RCC_PLLCFGR_PLLN_2 (0x04U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000400 */ +#define RCC_PLLCFGR_PLLN_3 (0x08U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00000800 */ +#define RCC_PLLCFGR_PLLN_4 (0x10U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00001000 */ +#define RCC_PLLCFGR_PLLN_5 (0x20U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00002000 */ +#define RCC_PLLCFGR_PLLN_6 (0x40U << RCC_PLLCFGR_PLLN_Pos) /*!< 0x00004000 */ + +#define RCC_PLLCFGR_PLLPEN_Pos (16U) +#define RCC_PLLCFGR_PLLPEN_Msk (0x1UL << RCC_PLLCFGR_PLLPEN_Pos) /*!< 0x00010000 */ +#define RCC_PLLCFGR_PLLPEN RCC_PLLCFGR_PLLPEN_Msk +#define RCC_PLLCFGR_PLLP_Pos (17U) +#define RCC_PLLCFGR_PLLP_Msk (0x1FUL << RCC_PLLCFGR_PLLP_Pos) /*!< 0x003E0000 */ +#define RCC_PLLCFGR_PLLP RCC_PLLCFGR_PLLP_Msk +#define RCC_PLLCFGR_PLLP_0 (0x01U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00020000 */ +#define RCC_PLLCFGR_PLLP_1 (0x02U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00040000 */ +#define RCC_PLLCFGR_PLLP_2 (0x04U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00080000 */ +#define RCC_PLLCFGR_PLLP_3 (0x08U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00100000 */ +#define RCC_PLLCFGR_PLLP_4 (0x10U << RCC_PLLCFGR_PLLP_Pos) /*!< 0x00200000 */ + +#define RCC_PLLCFGR_PLLQEN_Pos (24U) +#define RCC_PLLCFGR_PLLQEN_Msk (0x1UL << RCC_PLLCFGR_PLLQEN_Pos) /*!< 0x01000000 */ +#define RCC_PLLCFGR_PLLQEN RCC_PLLCFGR_PLLQEN_Msk +#define RCC_PLLCFGR_PLLQ_Pos (25U) +#define RCC_PLLCFGR_PLLQ_Msk (0x7UL << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x0E000000 */ +#define RCC_PLLCFGR_PLLQ RCC_PLLCFGR_PLLQ_Msk +#define RCC_PLLCFGR_PLLQ_0 (0x1U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x02000000 */ +#define RCC_PLLCFGR_PLLQ_1 (0x2U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x04000000 */ +#define RCC_PLLCFGR_PLLQ_2 (0x4U << RCC_PLLCFGR_PLLQ_Pos) /*!< 0x08000000 */ + +#define RCC_PLLCFGR_PLLREN_Pos (28U) +#define RCC_PLLCFGR_PLLREN_Msk (0x1UL << RCC_PLLCFGR_PLLREN_Pos) /*!< 0x10000000 */ +#define RCC_PLLCFGR_PLLREN RCC_PLLCFGR_PLLREN_Msk +#define RCC_PLLCFGR_PLLR_Pos (29U) +#define RCC_PLLCFGR_PLLR_Msk (0x7UL << RCC_PLLCFGR_PLLR_Pos) /*!< 0xE0000000 */ +#define RCC_PLLCFGR_PLLR RCC_PLLCFGR_PLLR_Msk +#define RCC_PLLCFGR_PLLR_0 (0x1U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x20000000 */ +#define RCC_PLLCFGR_PLLR_1 (0x2U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x40000000 */ +#define RCC_PLLCFGR_PLLR_2 (0x4U << RCC_PLLCFGR_PLLR_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_CIER register ******************/ +#define RCC_CIER_LSI1RDYIE_Pos (0U) +#define RCC_CIER_LSI1RDYIE_Msk (0x1UL << RCC_CIER_LSI1RDYIE_Pos) /*!< 0x00000001 */ +#define RCC_CIER_LSI1RDYIE RCC_CIER_LSI1RDYIE_Msk +#define RCC_CIER_LSERDYIE_Pos (1U) +#define RCC_CIER_LSERDYIE_Msk (0x1UL << RCC_CIER_LSERDYIE_Pos) /*!< 0x00000002 */ +#define RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE_Msk +#define RCC_CIER_MSIRDYIE_Pos (2U) +#define RCC_CIER_MSIRDYIE_Msk (0x1UL << RCC_CIER_MSIRDYIE_Pos) /*!< 0x00000004 */ +#define RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE_Msk +#define RCC_CIER_HSIRDYIE_Pos (3U) +#define RCC_CIER_HSIRDYIE_Msk (0x1UL << RCC_CIER_HSIRDYIE_Pos) /*!< 0x00000008 */ +#define RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE_Msk +#define RCC_CIER_HSERDYIE_Pos (4U) +#define RCC_CIER_HSERDYIE_Msk (0x1UL << RCC_CIER_HSERDYIE_Pos) /*!< 0x00000010 */ +#define RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE_Msk +#define RCC_CIER_PLLRDYIE_Pos (5U) +#define RCC_CIER_PLLRDYIE_Msk (0x1UL << RCC_CIER_PLLRDYIE_Pos) /*!< 0x00000020 */ +#define RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE_Msk +#define RCC_CIER_LSECSSIE_Pos (9U) +#define RCC_CIER_LSECSSIE_Msk (0x1UL << RCC_CIER_LSECSSIE_Pos) /*!< 0x00000200 */ +#define RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE_Msk +#define RCC_CIER_LSI2RDYIE_Pos (11U) +#define RCC_CIER_LSI2RDYIE_Msk (0x1UL << RCC_CIER_LSI2RDYIE_Pos) /*!< 0x00000800 */ +#define RCC_CIER_LSI2RDYIE RCC_CIER_LSI2RDYIE_Msk + + +/******************** Bit definition for RCC_CIFR register ******************/ +#define RCC_CIFR_LSI1RDYF_Pos (0U) +#define RCC_CIFR_LSI1RDYF_Msk (0x1UL << RCC_CIFR_LSI1RDYF_Pos) /*!< 0x00000001 */ +#define RCC_CIFR_LSI1RDYF RCC_CIFR_LSI1RDYF_Msk +#define RCC_CIFR_LSERDYF_Pos (1U) +#define RCC_CIFR_LSERDYF_Msk (0x1UL << RCC_CIFR_LSERDYF_Pos) /*!< 0x00000002 */ +#define RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF_Msk +#define RCC_CIFR_MSIRDYF_Pos (2U) +#define RCC_CIFR_MSIRDYF_Msk (0x1UL << RCC_CIFR_MSIRDYF_Pos) /*!< 0x00000004 */ +#define RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF_Msk +#define RCC_CIFR_HSIRDYF_Pos (3U) +#define RCC_CIFR_HSIRDYF_Msk (0x1UL << RCC_CIFR_HSIRDYF_Pos) /*!< 0x00000008 */ +#define RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF_Msk +#define RCC_CIFR_HSERDYF_Pos (4U) +#define RCC_CIFR_HSERDYF_Msk (0x1UL << RCC_CIFR_HSERDYF_Pos) /*!< 0x00000010 */ +#define RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF_Msk +#define RCC_CIFR_PLLRDYF_Pos (5U) +#define RCC_CIFR_PLLRDYF_Msk (0x1UL << RCC_CIFR_PLLRDYF_Pos) /*!< 0x00000020 */ +#define RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF_Msk +#define RCC_CIFR_CSSF_Pos (8U) +#define RCC_CIFR_CSSF_Msk (0x1UL << RCC_CIFR_CSSF_Pos) /*!< 0x00000100 */ +#define RCC_CIFR_CSSF RCC_CIFR_CSSF_Msk +#define RCC_CIFR_LSECSSF_Pos (9U) +#define RCC_CIFR_LSECSSF_Msk (0x1UL << RCC_CIFR_LSECSSF_Pos) /*!< 0x00000200 */ +#define RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF_Msk +#define RCC_CIFR_LSI2RDYF_Pos (11U) +#define RCC_CIFR_LSI2RDYF_Msk (0x1UL << RCC_CIFR_LSI2RDYF_Pos) /*!< 0x00000800 */ +#define RCC_CIFR_LSI2RDYF RCC_CIFR_LSI2RDYF_Msk + +/******************** Bit definition for RCC_CICR register ******************/ +#define RCC_CICR_LSI1RDYC_Pos (0U) +#define RCC_CICR_LSI1RDYC_Msk (0x1UL << RCC_CICR_LSI1RDYC_Pos) /*!< 0x00000001 */ +#define RCC_CICR_LSI1RDYC RCC_CICR_LSI1RDYC_Msk +#define RCC_CICR_LSERDYC_Pos (1U) +#define RCC_CICR_LSERDYC_Msk (0x1UL << RCC_CICR_LSERDYC_Pos) /*!< 0x00000002 */ +#define RCC_CICR_LSERDYC RCC_CICR_LSERDYC_Msk +#define RCC_CICR_MSIRDYC_Pos (2U) +#define RCC_CICR_MSIRDYC_Msk (0x1UL << RCC_CICR_MSIRDYC_Pos) /*!< 0x00000004 */ +#define RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC_Msk +#define RCC_CICR_HSIRDYC_Pos (3U) +#define RCC_CICR_HSIRDYC_Msk (0x1UL << RCC_CICR_HSIRDYC_Pos) /*!< 0x00000008 */ +#define RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC_Msk +#define RCC_CICR_HSERDYC_Pos (4U) +#define RCC_CICR_HSERDYC_Msk (0x1UL << RCC_CICR_HSERDYC_Pos) /*!< 0x00000010 */ +#define RCC_CICR_HSERDYC RCC_CICR_HSERDYC_Msk +#define RCC_CICR_PLLRDYC_Pos (5U) +#define RCC_CICR_PLLRDYC_Msk (0x1UL << RCC_CICR_PLLRDYC_Pos) /*!< 0x00000020 */ +#define RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC_Msk +#define RCC_CICR_CSSC_Pos (8U) +#define RCC_CICR_CSSC_Msk (0x1UL << RCC_CICR_CSSC_Pos) /*!< 0x00000100 */ +#define RCC_CICR_CSSC RCC_CICR_CSSC_Msk +#define RCC_CICR_LSECSSC_Pos (9U) +#define RCC_CICR_LSECSSC_Msk (0x1UL << RCC_CICR_LSECSSC_Pos) /*!< 0x00000200 */ +#define RCC_CICR_LSECSSC RCC_CICR_LSECSSC_Msk +#define RCC_CICR_LSI2RDYC_Pos (11U) +#define RCC_CICR_LSI2RDYC_Msk (0x1UL << RCC_CICR_LSI2RDYC_Pos) /*!< 0x00000800 */ +#define RCC_CICR_LSI2RDYC RCC_CICR_LSI2RDYC_Msk + +/******************** Bit definition for RCC_SMPSCR register ******************/ +#define RCC_SMPSCR_SMPSSEL_Pos (0U) +#define RCC_SMPSCR_SMPSSEL_Msk (0x3UL << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000003 */ +#define RCC_SMPSCR_SMPSSEL RCC_SMPSCR_SMPSSEL_Msk +#define RCC_SMPSCR_SMPSSEL_0 (0x1U << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000001 */ +#define RCC_SMPSCR_SMPSSEL_1 (0x2U << RCC_SMPSCR_SMPSSEL_Pos) /*!< 0x00000002 */ + +#define RCC_SMPSCR_SMPSDIV_Pos (4U) +#define RCC_SMPSCR_SMPSDIV_Msk (0x3UL << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000030 */ +#define RCC_SMPSCR_SMPSDIV RCC_SMPSCR_SMPSDIV_Msk +#define RCC_SMPSCR_SMPSDIV_0 (0x1U << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000010 */ +#define RCC_SMPSCR_SMPSDIV_1 (0x2U << RCC_SMPSCR_SMPSDIV_Pos) /*!< 0x00000020 */ + +#define RCC_SMPSCR_SMPSSWS_Pos (8U) +#define RCC_SMPSCR_SMPSSWS_Msk (0x3UL << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000300 */ +#define RCC_SMPSCR_SMPSSWS RCC_SMPSCR_SMPSSWS_Msk +#define RCC_SMPSCR_SMPSSWS_0 (0x1U << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000100 */ +#define RCC_SMPSCR_SMPSSWS_1 (0x2U << RCC_SMPSCR_SMPSSWS_Pos) /*!< 0x00000200 */ + +/******************** Bit definition for RCC_AHB1RSTR register **************/ +#define RCC_AHB1RSTR_DMA1RST_Pos (0U) +#define RCC_AHB1RSTR_DMA1RST_Msk (0x1UL << RCC_AHB1RSTR_DMA1RST_Pos) /*!< 0x00000001 */ +#define RCC_AHB1RSTR_DMA1RST RCC_AHB1RSTR_DMA1RST_Msk +#define RCC_AHB1RSTR_DMAMUX1RST_Pos (2U) +#define RCC_AHB1RSTR_DMAMUX1RST_Msk (0x1UL << RCC_AHB1RSTR_DMAMUX1RST_Pos) /*!< 0x00000004 */ +#define RCC_AHB1RSTR_DMAMUX1RST RCC_AHB1RSTR_DMAMUX1RST_Msk +#define RCC_AHB1RSTR_CRCRST_Pos (12U) +#define RCC_AHB1RSTR_CRCRST_Msk (0x1UL << RCC_AHB1RSTR_CRCRST_Pos) /*!< 0x00001000 */ +#define RCC_AHB1RSTR_CRCRST RCC_AHB1RSTR_CRCRST_Msk +#define RCC_AHB1RSTR_TSCRST_Pos (16U) +#define RCC_AHB1RSTR_TSCRST_Msk (0x1UL << RCC_AHB1RSTR_TSCRST_Pos) /*!< 0x00010000 */ +#define RCC_AHB1RSTR_TSCRST RCC_AHB1RSTR_TSCRST_Msk + +/******************** Bit definition for RCC_AHB2RSTR register ***************/ +#define RCC_AHB2RSTR_GPIOARST_Pos (0U) +#define RCC_AHB2RSTR_GPIOARST_Msk (0x1UL << RCC_AHB2RSTR_GPIOARST_Pos) /*!< 0x00000001 */ +#define RCC_AHB2RSTR_GPIOARST RCC_AHB2RSTR_GPIOARST_Msk +#define RCC_AHB2RSTR_GPIOBRST_Pos (1U) +#define RCC_AHB2RSTR_GPIOBRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOBRST_Pos) /*!< 0x00000002 */ +#define RCC_AHB2RSTR_GPIOBRST RCC_AHB2RSTR_GPIOBRST_Msk +#define RCC_AHB2RSTR_GPIOCRST_Pos (2U) +#define RCC_AHB2RSTR_GPIOCRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOCRST_Pos) /*!< 0x00000004 */ +#define RCC_AHB2RSTR_GPIOCRST RCC_AHB2RSTR_GPIOCRST_Msk +#define RCC_AHB2RSTR_GPIOERST_Pos (4U) +#define RCC_AHB2RSTR_GPIOERST_Msk (0x1UL << RCC_AHB2RSTR_GPIOERST_Pos) /*!< 0x00000010 */ +#define RCC_AHB2RSTR_GPIOERST RCC_AHB2RSTR_GPIOERST_Msk +#define RCC_AHB2RSTR_GPIOHRST_Pos (7U) +#define RCC_AHB2RSTR_GPIOHRST_Msk (0x1UL << RCC_AHB2RSTR_GPIOHRST_Pos) /*!< 0x00000080 */ +#define RCC_AHB2RSTR_GPIOHRST RCC_AHB2RSTR_GPIOHRST_Msk + +/******************** Bit definition for RCC_AHB3RSTR register ***************/ +#define RCC_AHB3RSTR_PKARST_Pos (16U) +#define RCC_AHB3RSTR_PKARST_Msk (0x1UL << RCC_AHB3RSTR_PKARST_Pos) /*!< 0x00010000 */ +#define RCC_AHB3RSTR_PKARST RCC_AHB3RSTR_PKARST_Msk +#define RCC_AHB3RSTR_AES2RST_Pos (17U) +#define RCC_AHB3RSTR_AES2RST_Msk (0x1UL << RCC_AHB3RSTR_AES2RST_Pos) /*!< 0x00020000 */ +#define RCC_AHB3RSTR_AES2RST RCC_AHB3RSTR_AES2RST_Msk +#define RCC_AHB3RSTR_RNGRST_Pos (18U) +#define RCC_AHB3RSTR_RNGRST_Msk (0x1UL << RCC_AHB3RSTR_RNGRST_Pos) /*!< 0x00040000 */ +#define RCC_AHB3RSTR_RNGRST RCC_AHB3RSTR_RNGRST_Msk +#define RCC_AHB3RSTR_HSEMRST_Pos (19U) +#define RCC_AHB3RSTR_HSEMRST_Msk (0x1UL << RCC_AHB3RSTR_HSEMRST_Pos) /*!< 0x00080000 */ +#define RCC_AHB3RSTR_HSEMRST RCC_AHB3RSTR_HSEMRST_Msk +#define RCC_AHB3RSTR_IPCCRST_Pos (20U) +#define RCC_AHB3RSTR_IPCCRST_Msk (0x1UL << RCC_AHB3RSTR_IPCCRST_Pos) /*!< 0x00100000 */ +#define RCC_AHB3RSTR_IPCCRST RCC_AHB3RSTR_IPCCRST_Msk +#define RCC_AHB3RSTR_FLASHRST_Pos (25U) +#define RCC_AHB3RSTR_FLASHRST_Msk (0x1UL << RCC_AHB3RSTR_FLASHRST_Pos) /*!< 0x02000000 */ +#define RCC_AHB3RSTR_FLASHRST RCC_AHB3RSTR_FLASHRST_Msk + +/******************** Bit definition for RCC_APB1RSTR1 register **************/ +#define RCC_APB1RSTR1_TIM2RST_Pos (0U) +#define RCC_APB1RSTR1_TIM2RST_Msk (0x1UL << RCC_APB1RSTR1_TIM2RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR1_TIM2RST RCC_APB1RSTR1_TIM2RST_Msk +#define RCC_APB1RSTR1_I2C1RST_Pos (21U) +#define RCC_APB1RSTR1_I2C1RST_Msk (0x1UL << RCC_APB1RSTR1_I2C1RST_Pos) /*!< 0x00200000 */ +#define RCC_APB1RSTR1_I2C1RST RCC_APB1RSTR1_I2C1RST_Msk +#define RCC_APB1RSTR1_LPTIM1RST_Pos (31U) +#define RCC_APB1RSTR1_LPTIM1RST_Msk (0x1UL << RCC_APB1RSTR1_LPTIM1RST_Pos) /*!< 0x80000000 */ +#define RCC_APB1RSTR1_LPTIM1RST RCC_APB1RSTR1_LPTIM1RST_Msk + +/******************** Bit definition for RCC_APB1RSTR2 register **************/ +#define RCC_APB1RSTR2_LPUART1RST_Pos (0U) +#define RCC_APB1RSTR2_LPUART1RST_Msk (0x1UL << RCC_APB1RSTR2_LPUART1RST_Pos) /*!< 0x00000001 */ +#define RCC_APB1RSTR2_LPUART1RST RCC_APB1RSTR2_LPUART1RST_Msk +#define RCC_APB1RSTR2_LPTIM2RST_Pos (5U) +#define RCC_APB1RSTR2_LPTIM2RST_Msk (0x1UL << RCC_APB1RSTR2_LPTIM2RST_Pos) /*!< 0x00000020 */ +#define RCC_APB1RSTR2_LPTIM2RST RCC_APB1RSTR2_LPTIM2RST_Msk + +/******************** Bit definition for RCC_APB2RSTR register **************/ +#define RCC_APB2RSTR_ADCRST_Pos (9U) +#define RCC_APB2RSTR_ADCRST_Msk (0x1UL << RCC_APB2RSTR_ADCRST_Pos) /*!< 0x00000200 */ +#define RCC_APB2RSTR_ADCRST RCC_APB2RSTR_ADCRST_Msk +#define RCC_APB2RSTR_TIM1RST_Pos (11U) +#define RCC_APB2RSTR_TIM1RST_Msk (0x1UL << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ +#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk +#define RCC_APB2RSTR_SPI1RST_Pos (12U) +#define RCC_APB2RSTR_SPI1RST_Msk (0x1UL << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ +#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk +#define RCC_APB2RSTR_USART1RST_Pos (14U) +#define RCC_APB2RSTR_USART1RST_Msk (0x1UL << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ +#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk + +/******************** Bit definition for RCC_APB3RSTR register **************/ +#define RCC_APB3RSTR_RFRST_Pos (0U) +#define RCC_APB3RSTR_RFRST_Msk (0x1UL << RCC_APB3RSTR_RFRST_Pos) /*!< 0x00000001 */ +#define RCC_APB3RSTR_RFRST RCC_APB3RSTR_RFRST_Msk + +/******************** Bit definition for RCC_AHB1ENR register ****************/ +#define RCC_AHB1ENR_DMA1EN_Pos (0U) +#define RCC_AHB1ENR_DMA1EN_Msk (0x1UL << RCC_AHB1ENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_AHB1ENR_DMA1EN RCC_AHB1ENR_DMA1EN_Msk +#define RCC_AHB1ENR_DMAMUX1EN_Pos (2U) +#define RCC_AHB1ENR_DMAMUX1EN_Msk (0x1UL << RCC_AHB1ENR_DMAMUX1EN_Pos) /*!< 0x00000004 */ +#define RCC_AHB1ENR_DMAMUX1EN RCC_AHB1ENR_DMAMUX1EN_Msk +#define RCC_AHB1ENR_CRCEN_Pos (12U) +#define RCC_AHB1ENR_CRCEN_Msk (0x1UL << RCC_AHB1ENR_CRCEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB1ENR_CRCEN RCC_AHB1ENR_CRCEN_Msk +#define RCC_AHB1ENR_TSCEN_Pos (16U) +#define RCC_AHB1ENR_TSCEN_Msk (0x1UL << RCC_AHB1ENR_TSCEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1ENR_TSCEN RCC_AHB1ENR_TSCEN_Msk + +/******************** Bit definition for RCC_AHB2ENR register ***************/ +#define RCC_AHB2ENR_GPIOAEN_Pos (0U) +#define RCC_AHB2ENR_GPIOAEN_Msk (0x1UL << RCC_AHB2ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB2ENR_GPIOAEN RCC_AHB2ENR_GPIOAEN_Msk +#define RCC_AHB2ENR_GPIOBEN_Pos (1U) +#define RCC_AHB2ENR_GPIOBEN_Msk (0x1UL << RCC_AHB2ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2ENR_GPIOBEN RCC_AHB2ENR_GPIOBEN_Msk +#define RCC_AHB2ENR_GPIOCEN_Pos (2U) +#define RCC_AHB2ENR_GPIOCEN_Msk (0x1UL << RCC_AHB2ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB2ENR_GPIOCEN RCC_AHB2ENR_GPIOCEN_Msk +#define RCC_AHB2ENR_GPIOEEN_Pos (4U) +#define RCC_AHB2ENR_GPIOEEN_Msk (0x1UL << RCC_AHB2ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB2ENR_GPIOEEN RCC_AHB2ENR_GPIOEEN_Msk +#define RCC_AHB2ENR_GPIOHEN_Pos (7U) +#define RCC_AHB2ENR_GPIOHEN_Msk (0x1UL << RCC_AHB2ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB2ENR_GPIOHEN RCC_AHB2ENR_GPIOHEN_Msk + +/******************** Bit definition for RCC_AHB3ENR register ***************/ +#define RCC_AHB3ENR_PKAEN_Pos (16U) +#define RCC_AHB3ENR_PKAEN_Msk (0x1UL << RCC_AHB3ENR_PKAEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB3ENR_PKAEN RCC_AHB3ENR_PKAEN_Msk +#define RCC_AHB3ENR_AES2EN_Pos (17U) +#define RCC_AHB3ENR_AES2EN_Msk (0x1UL << RCC_AHB3ENR_AES2EN_Pos) /*!< 0x00020000 */ +#define RCC_AHB3ENR_AES2EN RCC_AHB3ENR_AES2EN_Msk +#define RCC_AHB3ENR_RNGEN_Pos (18U) +#define RCC_AHB3ENR_RNGEN_Msk (0x1UL << RCC_AHB3ENR_RNGEN_Pos) /*!< 0x00040000 */ +#define RCC_AHB3ENR_RNGEN RCC_AHB3ENR_RNGEN_Msk +#define RCC_AHB3ENR_HSEMEN_Pos (19U) +#define RCC_AHB3ENR_HSEMEN_Msk (0x1UL << RCC_AHB3ENR_HSEMEN_Pos) /*!< 0x00080000 */ +#define RCC_AHB3ENR_HSEMEN RCC_AHB3ENR_HSEMEN_Msk +#define RCC_AHB3ENR_IPCCEN_Pos (20U) +#define RCC_AHB3ENR_IPCCEN_Msk (0x1UL << RCC_AHB3ENR_IPCCEN_Pos) /*!< 0x00100000 */ +#define RCC_AHB3ENR_IPCCEN RCC_AHB3ENR_IPCCEN_Msk +#define RCC_AHB3ENR_FLASHEN_Pos (25U) +#define RCC_AHB3ENR_FLASHEN_Msk (0x1UL << RCC_AHB3ENR_FLASHEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB3ENR_FLASHEN RCC_AHB3ENR_FLASHEN_Msk + +/******************** Bit definition for RCC_APB1ENR1 register **************/ +#define RCC_APB1ENR1_TIM2EN_Pos (0U) +#define RCC_APB1ENR1_TIM2EN_Msk (0x1UL << RCC_APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR1_TIM2EN RCC_APB1ENR1_TIM2EN_Msk +#define RCC_APB1ENR1_RTCAPBEN_Pos (10U) +#define RCC_APB1ENR1_RTCAPBEN_Msk (0x1UL << RCC_APB1ENR1_RTCAPBEN_Pos) /*!< 0x00000400 */ +#define RCC_APB1ENR1_RTCAPBEN RCC_APB1ENR1_RTCAPBEN_Msk +#define RCC_APB1ENR1_WWDGEN_Pos (11U) +#define RCC_APB1ENR1_WWDGEN_Msk (0x1UL << RCC_APB1ENR1_WWDGEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1ENR1_WWDGEN RCC_APB1ENR1_WWDGEN_Msk +#define RCC_APB1ENR1_I2C1EN_Pos (21U) +#define RCC_APB1ENR1_I2C1EN_Msk (0x1UL << RCC_APB1ENR1_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_APB1ENR1_I2C1EN RCC_APB1ENR1_I2C1EN_Msk +#define RCC_APB1ENR1_LPTIM1EN_Pos (31U) +#define RCC_APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_APB1ENR1_LPTIM1EN_Pos) /*!< 0x80000000 */ +#define RCC_APB1ENR1_LPTIM1EN RCC_APB1ENR1_LPTIM1EN_Msk + +/******************** Bit definition for RCC_APB1ENR2 register **************/ +#define RCC_APB1ENR2_LPUART1EN_Pos (0U) +#define RCC_APB1ENR2_LPUART1EN_Msk (0x1UL << RCC_APB1ENR2_LPUART1EN_Pos) /*!< 0x00000001 */ +#define RCC_APB1ENR2_LPUART1EN RCC_APB1ENR2_LPUART1EN_Msk +#define RCC_APB1ENR2_LPTIM2EN_Pos (5U) +#define RCC_APB1ENR2_LPTIM2EN_Msk (0x1UL << RCC_APB1ENR2_LPTIM2EN_Pos) /*!< 0x00000020 */ +#define RCC_APB1ENR2_LPTIM2EN RCC_APB1ENR2_LPTIM2EN_Msk + +/******************** Bit definition for RCC_APB2ENR register **************/ +#define RCC_APB2ENR_ADCEN_Pos (9U) +#define RCC_APB2ENR_ADCEN_Msk (0x1UL << RCC_APB2ENR_ADCEN_Pos) /*!< 0x00000200 */ +#define RCC_APB2ENR_ADCEN RCC_APB2ENR_ADCEN_Msk +#define RCC_APB2ENR_TIM1EN_Pos (11U) +#define RCC_APB2ENR_TIM1EN_Msk (0x1UL << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk +#define RCC_APB2ENR_SPI1EN_Pos (12U) +#define RCC_APB2ENR_SPI1EN_Msk (0x1UL << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk +#define RCC_APB2ENR_USART1EN_Pos (14U) +#define RCC_APB2ENR_USART1EN_Msk (0x1UL << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk + +/******************** Bit definition for RCC_AHB1SMENR register ****************/ +#define RCC_AHB1SMENR_DMA1SMEN_Pos (0U) +#define RCC_AHB1SMENR_DMA1SMEN_Msk (0x1UL << RCC_AHB1SMENR_DMA1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB1SMENR_DMA1SMEN RCC_AHB1SMENR_DMA1SMEN_Msk +#define RCC_AHB1SMENR_DMAMUX1SMEN_Pos (2U) +#define RCC_AHB1SMENR_DMAMUX1SMEN_Msk (0x1UL << RCC_AHB1SMENR_DMAMUX1SMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB1SMENR_DMAMUX1SMEN RCC_AHB1SMENR_DMAMUX1SMEN_Msk +#define RCC_AHB1SMENR_SRAM1SMEN_Pos (9U) +#define RCC_AHB1SMENR_SRAM1SMEN_Msk (0x1UL << RCC_AHB1SMENR_SRAM1SMEN_Pos) /*!< 0x00000200 */ +#define RCC_AHB1SMENR_SRAM1SMEN RCC_AHB1SMENR_SRAM1SMEN_Msk +#define RCC_AHB1SMENR_CRCSMEN_Pos (12U) +#define RCC_AHB1SMENR_CRCSMEN_Msk (0x1UL << RCC_AHB1SMENR_CRCSMEN_Pos) /*!< 0x00001000 */ +#define RCC_AHB1SMENR_CRCSMEN RCC_AHB1SMENR_CRCSMEN_Msk +#define RCC_AHB1SMENR_TSCSMEN_Pos (16U) +#define RCC_AHB1SMENR_TSCSMEN_Msk (0x1UL << RCC_AHB1SMENR_TSCSMEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB1SMENR_TSCSMEN RCC_AHB1SMENR_TSCSMEN_Msk + +/******************** Bit definition for RCC_AHB2SMENR register ***************/ +#define RCC_AHB2SMENR_GPIOASMEN_Pos (0U) +#define RCC_AHB2SMENR_GPIOASMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOASMEN_Pos) /*!< 0x00000001 */ +#define RCC_AHB2SMENR_GPIOASMEN RCC_AHB2SMENR_GPIOASMEN_Msk +#define RCC_AHB2SMENR_GPIOBSMEN_Pos (1U) +#define RCC_AHB2SMENR_GPIOBSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOBSMEN_Pos) /*!< 0x00000002 */ +#define RCC_AHB2SMENR_GPIOBSMEN RCC_AHB2SMENR_GPIOBSMEN_Msk +#define RCC_AHB2SMENR_GPIOCSMEN_Pos (2U) +#define RCC_AHB2SMENR_GPIOCSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOCSMEN_Pos) /*!< 0x00000004 */ +#define RCC_AHB2SMENR_GPIOCSMEN RCC_AHB2SMENR_GPIOCSMEN_Msk +#define RCC_AHB2SMENR_GPIOESMEN_Pos (4U) +#define RCC_AHB2SMENR_GPIOESMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOESMEN_Pos) /*!< 0x00000010 */ +#define RCC_AHB2SMENR_GPIOESMEN RCC_AHB2SMENR_GPIOESMEN_Msk +#define RCC_AHB2SMENR_GPIOHSMEN_Pos (7U) +#define RCC_AHB2SMENR_GPIOHSMEN_Msk (0x1UL << RCC_AHB2SMENR_GPIOHSMEN_Pos) /*!< 0x00000080 */ +#define RCC_AHB2SMENR_GPIOHSMEN RCC_AHB2SMENR_GPIOHSMEN_Msk + +/******************** Bit definition for RCC_AHB3SMENR register ***************/ +#define RCC_AHB3SMENR_PKASMEN_Pos (16U) +#define RCC_AHB3SMENR_PKASMEN_Msk (0x1UL << RCC_AHB3SMENR_PKASMEN_Pos) /*!< 0x00010000 */ +#define RCC_AHB3SMENR_PKASMEN RCC_AHB3SMENR_PKASMEN_Msk +#define RCC_AHB3SMENR_AES2SMEN_Pos (17U) +#define RCC_AHB3SMENR_AES2SMEN_Msk (0x1UL << RCC_AHB3SMENR_AES2SMEN_Pos) /*!< 0x00020000 */ +#define RCC_AHB3SMENR_AES2SMEN RCC_AHB3SMENR_AES2SMEN_Msk +#define RCC_AHB3SMENR_RNGSMEN_Pos (18U) +#define RCC_AHB3SMENR_RNGSMEN_Msk (0x1UL << RCC_AHB3SMENR_RNGSMEN_Pos) /*!< 0x00040000 */ +#define RCC_AHB3SMENR_RNGSMEN RCC_AHB3SMENR_RNGSMEN_Msk +#define RCC_AHB3SMENR_SRAM2SMEN_Pos (24U) +#define RCC_AHB3SMENR_SRAM2SMEN_Msk (0x1UL << RCC_AHB3SMENR_SRAM2SMEN_Pos) /*!< 0x01000000 */ +#define RCC_AHB3SMENR_SRAM2SMEN RCC_AHB3SMENR_SRAM2SMEN_Msk +#define RCC_AHB3SMENR_FLASHSMEN_Pos (25U) +#define RCC_AHB3SMENR_FLASHSMEN_Msk (0x1UL << RCC_AHB3SMENR_FLASHSMEN_Pos) /*!< 0x02000000 */ +#define RCC_AHB3SMENR_FLASHSMEN RCC_AHB3SMENR_FLASHSMEN_Msk + +/******************** Bit definition for RCC_APB1SMENR1 register **************/ +#define RCC_APB1SMENR1_TIM2SMEN_Pos (0U) +#define RCC_APB1SMENR1_TIM2SMEN_Msk (0x1UL << RCC_APB1SMENR1_TIM2SMEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1SMENR1_TIM2SMEN RCC_APB1SMENR1_TIM2SMEN_Msk +#define RCC_APB1SMENR1_RTCAPBSMEN_Pos (10U) +#define RCC_APB1SMENR1_RTCAPBSMEN_Msk (0x1UL << RCC_APB1SMENR1_RTCAPBSMEN_Pos) /*!< 0x00000400 */ +#define RCC_APB1SMENR1_RTCAPBSMEN RCC_APB1SMENR1_RTCAPBSMEN_Msk +#define RCC_APB1SMENR1_WWDGSMEN_Pos (11U) +#define RCC_APB1SMENR1_WWDGSMEN_Msk (0x1UL << RCC_APB1SMENR1_WWDGSMEN_Pos) /*!< 0x00000800 */ +#define RCC_APB1SMENR1_WWDGSMEN RCC_APB1SMENR1_WWDGSMEN_Msk +#define RCC_APB1SMENR1_I2C1SMEN_Pos (21U) +#define RCC_APB1SMENR1_I2C1SMEN_Msk (0x1UL << RCC_APB1SMENR1_I2C1SMEN_Pos) /*!< 0x00200000 */ +#define RCC_APB1SMENR1_I2C1SMEN RCC_APB1SMENR1_I2C1SMEN_Msk +#define RCC_APB1SMENR1_LPTIM1SMEN_Pos (31U) +#define RCC_APB1SMENR1_LPTIM1SMEN_Msk (0x1UL << RCC_APB1SMENR1_LPTIM1SMEN_Pos) /*!< 0x80000000 */ +#define RCC_APB1SMENR1_LPTIM1SMEN RCC_APB1SMENR1_LPTIM1SMEN_Msk + +/******************** Bit definition for RCC_APB1SMENR2 register **************/ +#define RCC_APB1SMENR2_LPUART1SMEN_Pos (0U) +#define RCC_APB1SMENR2_LPUART1SMEN_Msk (0x1UL << RCC_APB1SMENR2_LPUART1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_APB1SMENR2_LPUART1SMEN RCC_APB1SMENR2_LPUART1SMEN_Msk +#define RCC_APB1SMENR2_LPTIM2SMEN_Pos (5U) +#define RCC_APB1SMENR2_LPTIM2SMEN_Msk (0x1UL << RCC_APB1SMENR2_LPTIM2SMEN_Pos) /*!< 0x00000020 */ +#define RCC_APB1SMENR2_LPTIM2SMEN RCC_APB1SMENR2_LPTIM2SMEN_Msk + +/******************** Bit definition for RCC_APB2SMENR register **************/ +#define RCC_APB2SMENR_ADCSMEN_Pos (9U) +#define RCC_APB2SMENR_ADCSMEN_Msk (0x1UL << RCC_APB2SMENR_ADCSMEN_Pos) /*!< 0x00000200 */ +#define RCC_APB2SMENR_ADCSMEN RCC_APB2SMENR_ADCSMEN_Msk +#define RCC_APB2SMENR_TIM1SMEN_Pos (11U) +#define RCC_APB2SMENR_TIM1SMEN_Msk (0x1UL << RCC_APB2SMENR_TIM1SMEN_Pos) /*!< 0x00000800 */ +#define RCC_APB2SMENR_TIM1SMEN RCC_APB2SMENR_TIM1SMEN_Msk +#define RCC_APB2SMENR_SPI1SMEN_Pos (12U) +#define RCC_APB2SMENR_SPI1SMEN_Msk (0x1UL << RCC_APB2SMENR_SPI1SMEN_Pos) /*!< 0x00001000 */ +#define RCC_APB2SMENR_SPI1SMEN RCC_APB2SMENR_SPI1SMEN_Msk +#define RCC_APB2SMENR_USART1SMEN_Pos (14U) +#define RCC_APB2SMENR_USART1SMEN_Msk (0x1UL << RCC_APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */ +#define RCC_APB2SMENR_USART1SMEN RCC_APB2SMENR_USART1SMEN_Msk + +/******************** Bit definition for RCC_CCIPR register ******************/ +#define RCC_CCIPR_USART1SEL_Pos (0U) +#define RCC_CCIPR_USART1SEL_Msk (0x3UL << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000003 */ +#define RCC_CCIPR_USART1SEL RCC_CCIPR_USART1SEL_Msk +#define RCC_CCIPR_USART1SEL_0 (0x1U << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000001 */ +#define RCC_CCIPR_USART1SEL_1 (0x2U << RCC_CCIPR_USART1SEL_Pos) /*!< 0x00000002 */ + +#define RCC_CCIPR_LPUART1SEL_Pos (10U) +#define RCC_CCIPR_LPUART1SEL_Msk (0x3UL << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x00000C00 */ +#define RCC_CCIPR_LPUART1SEL RCC_CCIPR_LPUART1SEL_Msk +#define RCC_CCIPR_LPUART1SEL_0 (0x1U << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x00000400 */ +#define RCC_CCIPR_LPUART1SEL_1 (0x2U << RCC_CCIPR_LPUART1SEL_Pos) /*!< 0x00000800 */ + +#define RCC_CCIPR_I2C1SEL_Pos (12U) +#define RCC_CCIPR_I2C1SEL_Msk (0x3UL << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00003000 */ +#define RCC_CCIPR_I2C1SEL RCC_CCIPR_I2C1SEL_Msk +#define RCC_CCIPR_I2C1SEL_0 (0x1U << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00001000 */ +#define RCC_CCIPR_I2C1SEL_1 (0x2U << RCC_CCIPR_I2C1SEL_Pos) /*!< 0x00002000 */ + +#define RCC_CCIPR_LPTIM1SEL_Pos (18U) +#define RCC_CCIPR_LPTIM1SEL_Msk (0x3UL << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x000C0000 */ +#define RCC_CCIPR_LPTIM1SEL RCC_CCIPR_LPTIM1SEL_Msk +#define RCC_CCIPR_LPTIM1SEL_0 (0x1U << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00040000 */ +#define RCC_CCIPR_LPTIM1SEL_1 (0x2U << RCC_CCIPR_LPTIM1SEL_Pos) /*!< 0x00080000 */ + +#define RCC_CCIPR_LPTIM2SEL_Pos (20U) +#define RCC_CCIPR_LPTIM2SEL_Msk (0x3UL << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00300000 */ +#define RCC_CCIPR_LPTIM2SEL RCC_CCIPR_LPTIM2SEL_Msk +#define RCC_CCIPR_LPTIM2SEL_0 (0x1U << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00100000 */ +#define RCC_CCIPR_LPTIM2SEL_1 (0x2U << RCC_CCIPR_LPTIM2SEL_Pos) /*!< 0x00200000 */ + +#define RCC_CCIPR_CLK48SEL_Pos (26U) +#define RCC_CCIPR_CLK48SEL_Msk (0x3UL << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x0C000000 */ +#define RCC_CCIPR_CLK48SEL RCC_CCIPR_CLK48SEL_Msk +#define RCC_CCIPR_CLK48SEL_0 (0x1U << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x04000000 */ +#define RCC_CCIPR_CLK48SEL_1 (0x2U << RCC_CCIPR_CLK48SEL_Pos) /*!< 0x08000000 */ + +#define RCC_CCIPR_ADCSEL_Pos (28U) +#define RCC_CCIPR_ADCSEL_Msk (0x3UL << RCC_CCIPR_ADCSEL_Pos) /*!< 0x30000000 */ +#define RCC_CCIPR_ADCSEL RCC_CCIPR_ADCSEL_Msk +#define RCC_CCIPR_ADCSEL_0 (0x1U << RCC_CCIPR_ADCSEL_Pos) /*!< 0x10000000 */ +#define RCC_CCIPR_ADCSEL_1 (0x2U << RCC_CCIPR_ADCSEL_Pos) /*!< 0x20000000 */ + +#define RCC_CCIPR_RNGSEL_Pos (30U) +#define RCC_CCIPR_RNGSEL_Msk (0x3UL << RCC_CCIPR_RNGSEL_Pos) /*!< 0xC0000000 */ +#define RCC_CCIPR_RNGSEL RCC_CCIPR_RNGSEL_Msk +#define RCC_CCIPR_RNGSEL_0 (0x1U << RCC_CCIPR_RNGSEL_Pos) /*!< 0x40000000 */ +#define RCC_CCIPR_RNGSEL_1 (0x2U << RCC_CCIPR_RNGSEL_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for RCC_BDCR register ******************/ +#define RCC_BDCR_LSEON_Pos (0U) +#define RCC_BDCR_LSEON_Msk (0x1UL << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ +#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk +#define RCC_BDCR_LSERDY_Pos (1U) +#define RCC_BDCR_LSERDY_Msk (0x1UL << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ +#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk +#define RCC_BDCR_LSEBYP_Pos (2U) +#define RCC_BDCR_LSEBYP_Msk (0x1UL << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ +#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk + +#define RCC_BDCR_LSEDRV_Pos (3U) +#define RCC_BDCR_LSEDRV_Msk (0x3UL << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000018 */ +#define RCC_BDCR_LSEDRV RCC_BDCR_LSEDRV_Msk +#define RCC_BDCR_LSEDRV_0 (0x1U << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000008 */ +#define RCC_BDCR_LSEDRV_1 (0x2U << RCC_BDCR_LSEDRV_Pos) /*!< 0x00000010 */ + +#define RCC_BDCR_LSECSSON_Pos (5U) +#define RCC_BDCR_LSECSSON_Msk (0x1UL << RCC_BDCR_LSECSSON_Pos) /*!< 0x00000020 */ +#define RCC_BDCR_LSECSSON RCC_BDCR_LSECSSON_Msk +#define RCC_BDCR_LSECSSD_Pos (6U) +#define RCC_BDCR_LSECSSD_Msk (0x1UL << RCC_BDCR_LSECSSD_Pos) /*!< 0x00000040 */ +#define RCC_BDCR_LSECSSD RCC_BDCR_LSECSSD_Msk + +#define RCC_BDCR_RTCSEL_Pos (8U) +#define RCC_BDCR_RTCSEL_Msk (0x3UL << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ +#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk +#define RCC_BDCR_RTCSEL_0 (0x1U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ +#define RCC_BDCR_RTCSEL_1 (0x2U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ + +#define RCC_BDCR_RTCEN_Pos (15U) +#define RCC_BDCR_RTCEN_Msk (0x1UL << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ +#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk + +#define RCC_BDCR_BDRST_Pos (16U) +#define RCC_BDCR_BDRST_Msk (0x1UL << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ +#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk + +#define RCC_BDCR_LSCOEN_Pos (24U) +#define RCC_BDCR_LSCOEN_Msk (0x1UL << RCC_BDCR_LSCOEN_Pos) /*!< 0x01000000 */ +#define RCC_BDCR_LSCOEN RCC_BDCR_LSCOEN_Msk +#define RCC_BDCR_LSCOSEL_Pos (25U) +#define RCC_BDCR_LSCOSEL_Msk (0x1UL << RCC_BDCR_LSCOSEL_Pos) /*!< 0x02000000 */ +#define RCC_BDCR_LSCOSEL RCC_BDCR_LSCOSEL_Msk + +/******************** Bit definition for RCC_CSR register *******************/ +#define RCC_CSR_LSI1ON_Pos (0U) +#define RCC_CSR_LSI1ON_Msk (0x1UL << RCC_CSR_LSI1ON_Pos) /*!< 0x00000001 */ +#define RCC_CSR_LSI1ON RCC_CSR_LSI1ON_Msk +#define RCC_CSR_LSI1RDY_Pos (1U) +#define RCC_CSR_LSI1RDY_Msk (0x1UL << RCC_CSR_LSI1RDY_Pos) /*!< 0x00000002 */ +#define RCC_CSR_LSI1RDY RCC_CSR_LSI1RDY_Msk +#define RCC_CSR_LSI2ON_Pos (2U) +#define RCC_CSR_LSI2ON_Msk (0x1UL << RCC_CSR_LSI2ON_Pos) /*!< 0x00000004 */ +#define RCC_CSR_LSI2ON RCC_CSR_LSI2ON_Msk +#define RCC_CSR_LSI2RDY_Pos (3U) +#define RCC_CSR_LSI2RDY_Msk (0x1UL << RCC_CSR_LSI2RDY_Pos) /*!< 0x00000008 */ +#define RCC_CSR_LSI2RDY RCC_CSR_LSI2RDY_Msk +#define RCC_CSR_LSI2TRIM_Pos (8U) +#define RCC_CSR_LSI2TRIM_Msk (0xFUL << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000F00 */ +#define RCC_CSR_LSI2TRIM RCC_CSR_LSI2TRIM_Msk +#define RCC_CSR_LSI2TRIM_0 (0x1U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000100 */ +#define RCC_CSR_LSI2TRIM_1 (0x2U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000200 */ +#define RCC_CSR_LSI2TRIM_2 (0x4U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000400 */ +#define RCC_CSR_LSI2TRIM_3 (0x8U << RCC_CSR_LSI2TRIM_Pos) /*!< 0x00000800 */ +#define RCC_CSR_RFWKPSEL_Pos (14U) +#define RCC_CSR_RFWKPSEL_Msk (0x3UL << RCC_CSR_RFWKPSEL_Pos) /*!< 0x0000C000 */ +#define RCC_CSR_RFWKPSEL RCC_CSR_RFWKPSEL_Msk +#define RCC_CSR_RFWKPSEL_0 (0x1U << RCC_CSR_RFWKPSEL_Pos) /*!< 0x00004000 */ +#define RCC_CSR_RFWKPSEL_1 (0x2U << RCC_CSR_RFWKPSEL_Pos) /*!< 0x00008000 */ +#define RCC_CSR_RFRSTS_Pos (16U) +#define RCC_CSR_RFRSTS_Msk (0x1UL << RCC_CSR_RFRSTS_Pos) /*!< 0x00010000 */ +#define RCC_CSR_RFRSTS RCC_CSR_RFRSTS_Msk +#define RCC_CSR_RMVF_Pos (23U) +#define RCC_CSR_RMVF_Msk (0x1UL << RCC_CSR_RMVF_Pos) /*!< 0x00800000 */ +#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk +#define RCC_CSR_OBLRSTF_Pos (25U) +#define RCC_CSR_OBLRSTF_Msk (0x1UL << RCC_CSR_OBLRSTF_Pos) /*!< 0x02000000 */ +#define RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF_Msk +#define RCC_CSR_PINRSTF_Pos (26U) +#define RCC_CSR_PINRSTF_Msk (0x1UL << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ +#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk +#define RCC_CSR_BORRSTF_Pos (27U) +#define RCC_CSR_BORRSTF_Msk (0x1UL << RCC_CSR_BORRSTF_Pos) /*!< 0x08000000 */ +#define RCC_CSR_BORRSTF RCC_CSR_BORRSTF_Msk +#define RCC_CSR_SFTRSTF_Pos (28U) +#define RCC_CSR_SFTRSTF_Msk (0x1UL << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ +#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk +#define RCC_CSR_IWDGRSTF_Pos (29U) +#define RCC_CSR_IWDGRSTF_Msk (0x1UL << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ +#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk +#define RCC_CSR_WWDGRSTF_Pos (30U) +#define RCC_CSR_WWDGRSTF_Msk (0x1UL << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ +#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk +#define RCC_CSR_LPWRRSTF_Pos (31U) +#define RCC_CSR_LPWRRSTF_Msk (0x1UL << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ +#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk + +/******************** Bit definition for RCC_HSECR register *******************/ +#define RCC_HSECR_UNLOCKED_Pos (0U) +#define RCC_HSECR_UNLOCKED_Msk (0x1UL << RCC_HSECR_UNLOCKED_Pos) /*!< 0x00000001 */ +#define RCC_HSECR_UNLOCKED RCC_HSECR_UNLOCKED_Msk + +#define RCC_HSECR_HSES_Pos (3U) +#define RCC_HSECR_HSES_Msk (0x1UL << RCC_HSECR_HSES_Pos) /*!< 0x00000008 */ +#define RCC_HSECR_HSES RCC_HSECR_HSES_Msk + +#define RCC_HSECR_HSEGMC_Pos (4U) +#define RCC_HSECR_HSEGMC_Msk (0x7UL << RCC_HSECR_HSEGMC_Pos) /*!< 0x00000070 */ +#define RCC_HSECR_HSEGMC RCC_HSECR_HSEGMC_Msk +#define RCC_HSECR_HSEGMC0_Pos (4U) +#define RCC_HSECR_HSEGMC0_Msk (0x1UL << RCC_HSECR_HSEGMC0_Pos) /*!< 0x00000010 */ +#define RCC_HSECR_HSEGMC0 RCC_HSECR_HSEGMC0_Msk +#define RCC_HSECR_HSEGMC1_Pos (5U) +#define RCC_HSECR_HSEGMC1_Msk (0x1UL << RCC_HSECR_HSEGMC1_Pos) /*!< 0x00000020 */ +#define RCC_HSECR_HSEGMC1 RCC_HSECR_HSEGMC1_Msk +#define RCC_HSECR_HSEGMC2_Pos (6U) +#define RCC_HSECR_HSEGMC2_Msk (0x1UL << RCC_HSECR_HSEGMC2_Pos) /*!< 0x00000040 */ +#define RCC_HSECR_HSEGMC2 RCC_HSECR_HSEGMC2_Msk + +#define RCC_HSECR_HSETUNE_Pos (8U) +#define RCC_HSECR_HSETUNE_Msk (0x3FUL << RCC_HSECR_HSETUNE_Pos) /*!< 0x00003F00 */ +#define RCC_HSECR_HSETUNE RCC_HSECR_HSETUNE_Msk +#define RCC_HSECR_HSETUNE0_Pos (8U) +#define RCC_HSECR_HSETUNE0_Msk (0x1UL << RCC_HSECR_HSETUNE0_Pos) /*!< 0x00000100 */ +#define RCC_HSECR_HSETUNE0 RCC_HSECR_HSETUNE0_Msk +#define RCC_HSECR_HSETUNE1_Pos (9U) +#define RCC_HSECR_HSETUNE1_Msk (0x1UL << RCC_HSECR_HSETUNE1_Pos) /*!< 0x00000200 */ +#define RCC_HSECR_HSETUNE1 RCC_HSECR_HSETUNE1_Msk +#define RCC_HSECR_HSETUNE2_Pos (10U) +#define RCC_HSECR_HSETUNE2_Msk (0x1UL << RCC_HSECR_HSETUNE2_Pos) /*!< 0x00000400 */ +#define RCC_HSECR_HSETUNE2 RCC_HSECR_HSETUNE2_Msk +#define RCC_HSECR_HSETUNE3_Pos (11U) +#define RCC_HSECR_HSETUNE3_Msk (0x1UL << RCC_HSECR_HSETUNE3_Pos) /*!< 0x00000800 */ +#define RCC_HSECR_HSETUNE3 RCC_HSECR_HSETUNE3_Msk +#define RCC_HSECR_HSETUNE4_Pos (12U) +#define RCC_HSECR_HSETUNE4_Msk (0x1UL << RCC_HSECR_HSETUNE4_Pos) /*!< 0x00001000 */ +#define RCC_HSECR_HSETUNE4 RCC_HSECR_HSETUNE4_Msk +#define RCC_HSECR_HSETUNE5_Pos (13U) +#define RCC_HSECR_HSETUNE5_Msk (0x1UL << RCC_HSECR_HSETUNE5_Pos) /*!< 0x00002000 */ +#define RCC_HSECR_HSETUNE5 RCC_HSECR_HSETUNE5_Msk + +/******************** Bit definition for RCC_EXTCFGR register *******************/ +#define RCC_EXTCFGR_SHDHPRE_Pos (0U) +#define RCC_EXTCFGR_SHDHPRE_Msk (0xFUL << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x0000000F */ +#define RCC_EXTCFGR_SHDHPRE RCC_EXTCFGR_SHDHPRE_Msk +#define RCC_EXTCFGR_SHDHPRE_0 (0x1U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000001 */ +#define RCC_EXTCFGR_SHDHPRE_1 (0x2U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000002 */ +#define RCC_EXTCFGR_SHDHPRE_2 (0x4U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000004 */ +#define RCC_EXTCFGR_SHDHPRE_3 (0x8U << RCC_EXTCFGR_SHDHPRE_Pos) /*!< 0x00000008 */ + +#define RCC_EXTCFGR_C2HPRE_Pos (4U) +#define RCC_EXTCFGR_C2HPRE_Msk (0xFUL << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x000000F0 */ +#define RCC_EXTCFGR_C2HPRE RCC_EXTCFGR_C2HPRE_Msk +#define RCC_EXTCFGR_C2HPRE_0 (0x1U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000010 */ +#define RCC_EXTCFGR_C2HPRE_1 (0x2U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000020 */ +#define RCC_EXTCFGR_C2HPRE_2 (0x4U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000040 */ +#define RCC_EXTCFGR_C2HPRE_3 (0x8U << RCC_EXTCFGR_C2HPRE_Pos) /*!< 0x00000080 */ + +#define RCC_EXTCFGR_SHDHPREF_Pos (16U) +#define RCC_EXTCFGR_SHDHPREF_Msk (0x1UL << RCC_EXTCFGR_SHDHPREF_Pos) /*!< 0x00010000 */ +#define RCC_EXTCFGR_SHDHPREF RCC_EXTCFGR_SHDHPREF_Msk +#define RCC_EXTCFGR_C2HPREF_Pos (17U) +#define RCC_EXTCFGR_C2HPREF_Msk (0x1UL << RCC_EXTCFGR_C2HPREF_Pos) /*!< 0x00020000 */ +#define RCC_EXTCFGR_C2HPREF RCC_EXTCFGR_C2HPREF_Msk +#define RCC_EXTCFGR_RFCSS_Pos (20U) +#define RCC_EXTCFGR_RFCSS_Msk (0x1UL << RCC_EXTCFGR_RFCSS_Pos) /*!< 0x00100000 */ +#define RCC_EXTCFGR_RFCSS RCC_EXTCFGR_RFCSS_Msk + +/******************** Bit definition for RCC_C2AHB1ENR register ****************/ +#define RCC_C2AHB1ENR_DMA1EN_Pos (0U) +#define RCC_C2AHB1ENR_DMA1EN_Msk (0x1UL << RCC_C2AHB1ENR_DMA1EN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB1ENR_DMA1EN RCC_C2AHB1ENR_DMA1EN_Msk +#define RCC_C2AHB1ENR_DMAMUX1EN_Pos (2U) +#define RCC_C2AHB1ENR_DMAMUX1EN_Msk (0x1UL << RCC_C2AHB1ENR_DMAMUX1EN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB1ENR_DMAMUX1EN RCC_C2AHB1ENR_DMAMUX1EN_Msk +#define RCC_C2AHB1ENR_SRAM1EN_Pos (9U) +#define RCC_C2AHB1ENR_SRAM1EN_Msk (0x1UL << RCC_C2AHB1ENR_SRAM1EN_Pos) /*!< 0x00000200 */ +#define RCC_C2AHB1ENR_SRAM1EN RCC_C2AHB1ENR_SRAM1EN_Msk +#define RCC_C2AHB1ENR_CRCEN_Pos (12U) +#define RCC_C2AHB1ENR_CRCEN_Msk (0x1UL << RCC_C2AHB1ENR_CRCEN_Pos) /*!< 0x00001000 */ +#define RCC_C2AHB1ENR_CRCEN RCC_C2AHB1ENR_CRCEN_Msk +#define RCC_C2AHB1ENR_TSCEN_Pos (16U) +#define RCC_C2AHB1ENR_TSCEN_Msk (0x1UL << RCC_C2AHB1ENR_TSCEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB1ENR_TSCEN RCC_C2AHB1ENR_TSCEN_Msk + +/******************** Bit definition for RCC_C2AHB2ENR register ***************/ +#define RCC_C2AHB2ENR_GPIOAEN_Pos (0U) +#define RCC_C2AHB2ENR_GPIOAEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOAEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB2ENR_GPIOAEN RCC_C2AHB2ENR_GPIOAEN_Msk +#define RCC_C2AHB2ENR_GPIOBEN_Pos (1U) +#define RCC_C2AHB2ENR_GPIOBEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOBEN_Pos) /*!< 0x00000002 */ +#define RCC_C2AHB2ENR_GPIOBEN RCC_C2AHB2ENR_GPIOBEN_Msk +#define RCC_C2AHB2ENR_GPIOCEN_Pos (2U) +#define RCC_C2AHB2ENR_GPIOCEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOCEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB2ENR_GPIOCEN RCC_C2AHB2ENR_GPIOCEN_Msk +#define RCC_C2AHB2ENR_GPIOEEN_Pos (4U) +#define RCC_C2AHB2ENR_GPIOEEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOEEN_Pos) /*!< 0x00000010 */ +#define RCC_C2AHB2ENR_GPIOEEN RCC_C2AHB2ENR_GPIOEEN_Msk +#define RCC_C2AHB2ENR_GPIOHEN_Pos (7U) +#define RCC_C2AHB2ENR_GPIOHEN_Msk (0x1UL << RCC_C2AHB2ENR_GPIOHEN_Pos) /*!< 0x00000080 */ +#define RCC_C2AHB2ENR_GPIOHEN RCC_C2AHB2ENR_GPIOHEN_Msk + +/******************** Bit definition for RCC_C2AHB3ENR register ***************/ +#define RCC_C2AHB3ENR_PKAEN_Pos (16U) +#define RCC_C2AHB3ENR_PKAEN_Msk (0x1UL << RCC_C2AHB3ENR_PKAEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB3ENR_PKAEN RCC_C2AHB3ENR_PKAEN_Msk +#define RCC_C2AHB3ENR_AES2EN_Pos (17U) +#define RCC_C2AHB3ENR_AES2EN_Msk (0x1UL << RCC_C2AHB3ENR_AES2EN_Pos) /*!< 0x00020000 */ +#define RCC_C2AHB3ENR_AES2EN RCC_C2AHB3ENR_AES2EN_Msk +#define RCC_C2AHB3ENR_RNGEN_Pos (18U) +#define RCC_C2AHB3ENR_RNGEN_Msk (0x1UL << RCC_C2AHB3ENR_RNGEN_Pos) /*!< 0x00040000 */ +#define RCC_C2AHB3ENR_RNGEN RCC_C2AHB3ENR_RNGEN_Msk +#define RCC_C2AHB3ENR_HSEMEN_Pos (19U) +#define RCC_C2AHB3ENR_HSEMEN_Msk (0x1UL << RCC_C2AHB3ENR_HSEMEN_Pos) /*!< 0x00080000 */ +#define RCC_C2AHB3ENR_HSEMEN RCC_C2AHB3ENR_HSEMEN_Msk +#define RCC_C2AHB3ENR_IPCCEN_Pos (20U) +#define RCC_C2AHB3ENR_IPCCEN_Msk (0x1UL << RCC_C2AHB3ENR_IPCCEN_Pos) /*!< 0x00100000 */ +#define RCC_C2AHB3ENR_IPCCEN RCC_C2AHB3ENR_IPCCEN_Msk +#define RCC_C2AHB3ENR_FLASHEN_Pos (25U) +#define RCC_C2AHB3ENR_FLASHEN_Msk (0x1UL << RCC_C2AHB3ENR_FLASHEN_Pos) /*!< 0x02000000 */ +#define RCC_C2AHB3ENR_FLASHEN RCC_C2AHB3ENR_FLASHEN_Msk + +/******************** Bit definition for RCC_C2APB1ENR1 register **************/ +#define RCC_C2APB1ENR1_TIM2EN_Pos (0U) +#define RCC_C2APB1ENR1_TIM2EN_Msk (0x1UL << RCC_C2APB1ENR1_TIM2EN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1ENR1_TIM2EN RCC_C2APB1ENR1_TIM2EN_Msk +#define RCC_C2APB1ENR1_RTCAPBEN_Pos (10U) +#define RCC_C2APB1ENR1_RTCAPBEN_Msk (0x1UL << RCC_C2APB1ENR1_RTCAPBEN_Pos) /*!< 0x00000400 */ +#define RCC_C2APB1ENR1_RTCAPBEN RCC_C2APB1ENR1_RTCAPBEN_Msk +#define RCC_C2APB1ENR1_I2C1EN_Pos (21U) +#define RCC_C2APB1ENR1_I2C1EN_Msk (0x1UL << RCC_C2APB1ENR1_I2C1EN_Pos) /*!< 0x00200000 */ +#define RCC_C2APB1ENR1_I2C1EN RCC_C2APB1ENR1_I2C1EN_Msk +#define RCC_C2APB1ENR1_LPTIM1EN_Pos (31U) +#define RCC_C2APB1ENR1_LPTIM1EN_Msk (0x1UL << RCC_C2APB1ENR1_LPTIM1EN_Pos) /*!< 0x80000000 */ +#define RCC_C2APB1ENR1_LPTIM1EN RCC_C2APB1ENR1_LPTIM1EN_Msk + +/******************** Bit definition for RCC_C2APB1ENR2 register **************/ +#define RCC_C2APB1ENR2_LPUART1EN_Pos (0U) +#define RCC_C2APB1ENR2_LPUART1EN_Msk (0x1UL << RCC_C2APB1ENR2_LPUART1EN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1ENR2_LPUART1EN RCC_C2APB1ENR2_LPUART1EN_Msk +#define RCC_C2APB1ENR2_LPTIM2EN_Pos (5U) +#define RCC_C2APB1ENR2_LPTIM2EN_Msk (0x1UL << RCC_C2APB1ENR2_LPTIM2EN_Pos) /*!< 0x00000020 */ +#define RCC_C2APB1ENR2_LPTIM2EN RCC_C2APB1ENR2_LPTIM2EN_Msk + +/******************** Bit definition for RCC_C2APB2ENR register **************/ +#define RCC_C2APB2ENR_ADCEN_Pos (9U) +#define RCC_C2APB2ENR_ADCEN_Msk (0x1UL << RCC_C2APB2ENR_ADCEN_Pos) /*!< 0x00000200 */ +#define RCC_C2APB2ENR_ADCEN RCC_C2APB2ENR_ADCEN_Msk +#define RCC_C2APB2ENR_TIM1EN_Pos (11U) +#define RCC_C2APB2ENR_TIM1EN_Msk (0x1UL << RCC_C2APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ +#define RCC_C2APB2ENR_TIM1EN RCC_C2APB2ENR_TIM1EN_Msk +#define RCC_C2APB2ENR_SPI1EN_Pos (12U) +#define RCC_C2APB2ENR_SPI1EN_Msk (0x1UL << RCC_C2APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ +#define RCC_C2APB2ENR_SPI1EN RCC_C2APB2ENR_SPI1EN_Msk +#define RCC_C2APB2ENR_USART1EN_Pos (14U) +#define RCC_C2APB2ENR_USART1EN_Msk (0x1UL << RCC_C2APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ +#define RCC_C2APB2ENR_USART1EN RCC_C2APB2ENR_USART1EN_Msk + +/******************** Bit definition for RCC_C2APB3ENR register **************/ +#define RCC_C2APB3ENR_BLEEN_Pos (0U) +#define RCC_C2APB3ENR_BLEEN_Msk (0x1UL << RCC_C2APB3ENR_BLEEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB3ENR_BLEEN RCC_C2APB3ENR_BLEEN_Msk + +/******************** Bit definition for RCC_C2AHB1SMENR register ****************/ +#define RCC_C2AHB1SMENR_DMA1SMEN_Pos (0U) +#define RCC_C2AHB1SMENR_DMA1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_DMA1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB1SMENR_DMA1SMEN RCC_C2AHB1SMENR_DMA1SMEN_Msk +#define RCC_C2AHB1SMENR_DMAMUX1SMEN_Pos (2U) +#define RCC_C2AHB1SMENR_DMAMUX1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_DMAMUX1SMEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB1SMENR_DMAMUX1SMEN RCC_C2AHB1SMENR_DMAMUX1SMEN_Msk +#define RCC_C2AHB1SMENR_SRAM1SMEN_Pos (9U) +#define RCC_C2AHB1SMENR_SRAM1SMEN_Msk (0x1UL << RCC_C2AHB1SMENR_SRAM1SMEN_Pos) /*!< 0x00000200 */ +#define RCC_C2AHB1SMENR_SRAM1SMEN RCC_C2AHB1SMENR_SRAM1SMEN_Msk +#define RCC_C2AHB1SMENR_CRCSMEN_Pos (12U) +#define RCC_C2AHB1SMENR_CRCSMEN_Msk (0x1UL << RCC_C2AHB1SMENR_CRCSMEN_Pos) /*!< 0x00001000 */ +#define RCC_C2AHB1SMENR_CRCSMEN RCC_C2AHB1SMENR_CRCSMEN_Msk +#define RCC_C2AHB1SMENR_TSCSMEN_Pos (16U) +#define RCC_C2AHB1SMENR_TSCSMEN_Msk (0x1UL << RCC_C2AHB1SMENR_TSCSMEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB1SMENR_TSCSMEN RCC_C2AHB1SMENR_TSCSMEN_Msk + +/******************** Bit definition for RCC_C2AHB2SMENR register ***************/ +#define RCC_C2AHB2SMENR_GPIOASMEN_Pos (0U) +#define RCC_C2AHB2SMENR_GPIOASMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOASMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2AHB2SMENR_GPIOASMEN RCC_C2AHB2SMENR_GPIOASMEN_Msk +#define RCC_C2AHB2SMENR_GPIOBSMEN_Pos (1U) +#define RCC_C2AHB2SMENR_GPIOBSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOBSMEN_Pos) /*!< 0x00000002 */ +#define RCC_C2AHB2SMENR_GPIOBSMEN RCC_C2AHB2SMENR_GPIOBSMEN_Msk +#define RCC_C2AHB2SMENR_GPIOCSMEN_Pos (2U) +#define RCC_C2AHB2SMENR_GPIOCSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOCSMEN_Pos) /*!< 0x00000004 */ +#define RCC_C2AHB2SMENR_GPIOCSMEN RCC_C2AHB2SMENR_GPIOCSMEN_Msk +#define RCC_C2AHB2SMENR_GPIOESMEN_Pos (4U) +#define RCC_C2AHB2SMENR_GPIOESMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOESMEN_Pos) /*!< 0x00000010 */ +#define RCC_C2AHB2SMENR_GPIOESMEN RCC_C2AHB2SMENR_GPIOESMEN_Msk +#define RCC_C2AHB2SMENR_GPIOHSMEN_Pos (7U) +#define RCC_C2AHB2SMENR_GPIOHSMEN_Msk (0x1UL << RCC_C2AHB2SMENR_GPIOHSMEN_Pos) /*!< 0x00000080 */ +#define RCC_C2AHB2SMENR_GPIOHSMEN RCC_C2AHB2SMENR_GPIOHSMEN_Msk + +/******************** Bit definition for RCC_C2AHB3SMENR register ***************/ +#define RCC_C2AHB3SMENR_PKASMEN_Pos (16U) +#define RCC_C2AHB3SMENR_PKASMEN_Msk (0x1UL << RCC_C2AHB3SMENR_PKASMEN_Pos) /*!< 0x00010000 */ +#define RCC_C2AHB3SMENR_PKASMEN RCC_C2AHB3SMENR_PKASMEN_Msk +#define RCC_C2AHB3SMENR_AES2SMEN_Pos (17U) +#define RCC_C2AHB3SMENR_AES2SMEN_Msk (0x1UL << RCC_C2AHB3SMENR_AES2SMEN_Pos) /*!< 0x00020000 */ +#define RCC_C2AHB3SMENR_AES2SMEN RCC_C2AHB3SMENR_AES2SMEN_Msk +#define RCC_C2AHB3SMENR_RNGSMEN_Pos (18U) +#define RCC_C2AHB3SMENR_RNGSMEN_Msk (0x1UL << RCC_C2AHB3SMENR_RNGSMEN_Pos) /*!< 0x00040000 */ +#define RCC_C2AHB3SMENR_RNGSMEN RCC_C2AHB3SMENR_RNGSMEN_Msk +#define RCC_C2AHB3SMENR_SRAM2SMEN_Pos (24U) +#define RCC_C2AHB3SMENR_SRAM2SMEN_Msk (0x1UL << RCC_C2AHB3SMENR_SRAM2SMEN_Pos) /*!< 0x01000000 */ +#define RCC_C2AHB3SMENR_SRAM2SMEN RCC_C2AHB3SMENR_SRAM2SMEN_Msk +#define RCC_C2AHB3SMENR_FLASHSMEN_Pos (25U) +#define RCC_C2AHB3SMENR_FLASHSMEN_Msk (0x1UL << RCC_C2AHB3SMENR_FLASHSMEN_Pos) /*!< 0x02000000 */ +#define RCC_C2AHB3SMENR_FLASHSMEN RCC_C2AHB3SMENR_FLASHSMEN_Msk + +/******************** Bit definition for RCC_C2APB1SMENR1 register **************/ +#define RCC_C2APB1SMENR1_TIM2SMEN_Pos (0U) +#define RCC_C2APB1SMENR1_TIM2SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_TIM2SMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1SMENR1_TIM2SMEN RCC_C2APB1SMENR1_TIM2SMEN_Msk +#define RCC_C2APB1SMENR1_RTCAPBSMEN_Pos (10U) +#define RCC_C2APB1SMENR1_RTCAPBSMEN_Msk (0x1UL << RCC_C2APB1SMENR1_RTCAPBSMEN_Pos) /*!< 0x00000400 */ +#define RCC_C2APB1SMENR1_RTCAPBSMEN RCC_C2APB1SMENR1_RTCAPBSMEN_Msk +#define RCC_C2APB1SMENR1_I2C1SMEN_Pos (21U) +#define RCC_C2APB1SMENR1_I2C1SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_I2C1SMEN_Pos) /*!< 0x00200000 */ +#define RCC_C2APB1SMENR1_I2C1SMEN RCC_C2APB1SMENR1_I2C1SMEN_Msk +#define RCC_C2APB1SMENR1_LPTIM1SMEN_Pos (31U) +#define RCC_C2APB1SMENR1_LPTIM1SMEN_Msk (0x1UL << RCC_C2APB1SMENR1_LPTIM1SMEN_Pos) /*!< 0x80000000 */ +#define RCC_C2APB1SMENR1_LPTIM1SMEN RCC_C2APB1SMENR1_LPTIM1SMEN_Msk + +/******************** Bit definition for RCC_C2APB1SMENR2 register **************/ +#define RCC_C2APB1SMENR2_LPUART1SMEN_Pos (0U) +#define RCC_C2APB1SMENR2_LPUART1SMEN_Msk (0x1UL << RCC_C2APB1SMENR2_LPUART1SMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB1SMENR2_LPUART1SMEN RCC_C2APB1SMENR2_LPUART1SMEN_Msk +#define RCC_C2APB1SMENR2_LPTIM2SMEN_Pos (5U) +#define RCC_C2APB1SMENR2_LPTIM2SMEN_Msk (0x1UL << RCC_C2APB1SMENR2_LPTIM2SMEN_Pos) /*!< 0x00000020 */ +#define RCC_C2APB1SMENR2_LPTIM2SMEN RCC_C2APB1SMENR2_LPTIM2SMEN_Msk + +/******************** Bit definition for RCC_C2APB2SMENR register **************/ +#define RCC_C2APB2SMENR_ADCSMEN_Pos (9U) +#define RCC_C2APB2SMENR_ADCSMEN_Msk (0x1UL << RCC_C2APB2SMENR_ADCSMEN_Pos) /*!< 0x00000200 */ +#define RCC_C2APB2SMENR_ADCSMEN RCC_C2APB2SMENR_ADCSMEN_Msk +#define RCC_C2APB2SMENR_TIM1SMEN_Pos (11U) +#define RCC_C2APB2SMENR_TIM1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_TIM1SMEN_Pos) /*!< 0x00000800 */ +#define RCC_C2APB2SMENR_TIM1SMEN RCC_C2APB2SMENR_TIM1SMEN_Msk +#define RCC_C2APB2SMENR_SPI1SMEN_Pos (12U) +#define RCC_C2APB2SMENR_SPI1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_SPI1SMEN_Pos) /*!< 0x00001000 */ +#define RCC_C2APB2SMENR_SPI1SMEN RCC_C2APB2SMENR_SPI1SMEN_Msk +#define RCC_C2APB2SMENR_USART1SMEN_Pos (14U) +#define RCC_C2APB2SMENR_USART1SMEN_Msk (0x1UL << RCC_C2APB2SMENR_USART1SMEN_Pos) /*!< 0x00004000 */ +#define RCC_C2APB2SMENR_USART1SMEN RCC_C2APB2SMENR_USART1SMEN_Msk + +/******************** Bit definition for RCC_C2APB3SMENR register **************/ +#define RCC_C2APB3SMENR_BLESMEN_Pos (0U) +#define RCC_C2APB3SMENR_BLESMEN_Msk (0x1UL << RCC_C2APB3SMENR_BLESMEN_Pos) /*!< 0x00000001 */ +#define RCC_C2APB3SMENR_BLESMEN RCC_C2APB3SMENR_BLESMEN_Msk + +/******************************************************************************/ +/* */ +/* RNG */ +/* */ +/******************************************************************************/ +/******************** Bits definition for register *******************/ +#define RNG_CR_RNGEN_Pos (2U) +#define RNG_CR_RNGEN_Msk (0x1UL << RNG_CR_RNGEN_Pos) /*!< 0x00000004 */ +#define RNG_CR_RNGEN RNG_CR_RNGEN_Msk +#define RNG_CR_IE_Pos (3U) +#define RNG_CR_IE_Msk (0x1UL << RNG_CR_IE_Pos) /*!< 0x00000008 */ +#define RNG_CR_IE RNG_CR_IE_Msk +#define RNG_CR_CED_Pos (5U) +#define RNG_CR_CED_Msk (0x1UL << RNG_CR_CED_Pos) /*!< 0x00000020 */ +#define RNG_CR_CED RNG_CR_CED_Msk + +/******************** Bits definition for RNG_SR register *******************/ +#define RNG_SR_DRDY_Pos (0U) +#define RNG_SR_DRDY_Msk (0x1UL << RNG_SR_DRDY_Pos) /*!< 0x00000001 */ +#define RNG_SR_DRDY RNG_SR_DRDY_Msk +#define RNG_SR_CECS_Pos (1U) +#define RNG_SR_CECS_Msk (0x1UL << RNG_SR_CECS_Pos) /*!< 0x00000002 */ +#define RNG_SR_CECS RNG_SR_CECS_Msk +#define RNG_SR_SECS_Pos (2U) +#define RNG_SR_SECS_Msk (0x1UL << RNG_SR_SECS_Pos) /*!< 0x00000004 */ +#define RNG_SR_SECS RNG_SR_SECS_Msk +#define RNG_SR_CEIS_Pos (5U) +#define RNG_SR_CEIS_Msk (0x1UL << RNG_SR_CEIS_Pos) /*!< 0x00000020 */ +#define RNG_SR_CEIS RNG_SR_CEIS_Msk +#define RNG_SR_SEIS_Pos (6U) +#define RNG_SR_SEIS_Msk (0x1UL << RNG_SR_SEIS_Pos) /*!< 0x00000040 */ +#define RNG_SR_SEIS RNG_SR_SEIS_Msk + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/* +* @brief Specific device feature definitions +*/ +#define RTC_TAMPER2_SUPPORT +#define RTC_WAKEUP_SUPPORT +#define RTC_BACKUP_SUPPORT +#define RTC_CPU2_SUPPORT_D +#define RTC_INTERNALTS_SUPPORT + +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_PM_Pos (22U) +#define RTC_TR_PM_Msk (0x1UL << RTC_TR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TR_PM RTC_TR_PM_Msk /*!< AM/PM notation */ +#define RTC_TR_HT_Pos (20U) +#define RTC_TR_HT_Msk (0x3UL << RTC_TR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TR_HT RTC_TR_HT_Msk /*!< Hour tens in BCD format */ +#define RTC_TR_HT_0 (0x1U << RTC_TR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TR_HT_1 (0x2U << RTC_TR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TR_HU_Pos (16U) +#define RTC_TR_HU_Msk (0xFUL << RTC_TR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TR_HU RTC_TR_HU_Msk /*!< Hour units in BCD format */ +#define RTC_TR_HU_0 (0x1U << RTC_TR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TR_HU_1 (0x2U << RTC_TR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TR_HU_2 (0x4U << RTC_TR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TR_HU_3 (0x8U << RTC_TR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TR_MNT_Pos (12U) +#define RTC_TR_MNT_Msk (0x7UL << RTC_TR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TR_MNT RTC_TR_MNT_Msk /*!< Minute tens in BCD format */ +#define RTC_TR_MNT_0 (0x1U << RTC_TR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TR_MNT_1 (0x2U << RTC_TR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TR_MNT_2 (0x4U << RTC_TR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TR_MNU_Pos (8U) +#define RTC_TR_MNU_Msk (0xFUL << RTC_TR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TR_MNU RTC_TR_MNU_Msk /*!< Minute unit in BCD format */ +#define RTC_TR_MNU_0 (0x1U << RTC_TR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TR_MNU_1 (0x2U << RTC_TR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TR_MNU_2 (0x4U << RTC_TR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TR_MNU_3 (0x8U << RTC_TR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TR_ST_Pos (4U) +#define RTC_TR_ST_Msk (0x7UL << RTC_TR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TR_ST RTC_TR_ST_Msk /*!< Second tens in BCD format */ +#define RTC_TR_ST_0 (0x1U << RTC_TR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TR_ST_1 (0x2U << RTC_TR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TR_ST_2 (0x4U << RTC_TR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TR_SU_Pos (0U) +#define RTC_TR_SU_Msk (0xFUL << RTC_TR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TR_SU RTC_TR_SU_Msk /*!< Second units in BCD format */ +#define RTC_TR_SU_0 (0x1U << RTC_TR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TR_SU_1 (0x2U << RTC_TR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TR_SU_2 (0x4U << RTC_TR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TR_SU_3 (0x8U << RTC_TR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_YT_Pos (20U) +#define RTC_DR_YT_Msk (0xFUL << RTC_DR_YT_Pos) /*!< 0x00F00000 */ +#define RTC_DR_YT RTC_DR_YT_Msk /*!< Year tens in BCD format */ +#define RTC_DR_YT_0 (0x1U << RTC_DR_YT_Pos) /*!< 0x00100000 */ +#define RTC_DR_YT_1 (0x2U << RTC_DR_YT_Pos) /*!< 0x00200000 */ +#define RTC_DR_YT_2 (0x4U << RTC_DR_YT_Pos) /*!< 0x00400000 */ +#define RTC_DR_YT_3 (0x8U << RTC_DR_YT_Pos) /*!< 0x00800000 */ +#define RTC_DR_YU_Pos (16U) +#define RTC_DR_YU_Msk (0xFUL << RTC_DR_YU_Pos) /*!< 0x000F0000 */ +#define RTC_DR_YU RTC_DR_YU_Msk /*!< Years units in BCD format */ +#define RTC_DR_YU_0 (0x1U << RTC_DR_YU_Pos) /*!< 0x00010000 */ +#define RTC_DR_YU_1 (0x2U << RTC_DR_YU_Pos) /*!< 0x00020000 */ +#define RTC_DR_YU_2 (0x4U << RTC_DR_YU_Pos) /*!< 0x00040000 */ +#define RTC_DR_YU_3 (0x8U << RTC_DR_YU_Pos) /*!< 0x00080000 */ +#define RTC_DR_WDU_Pos (13U) +#define RTC_DR_WDU_Msk (0x7UL << RTC_DR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_DR_WDU RTC_DR_WDU_Msk /*!< Week day units */ +#define RTC_DR_WDU_0 (0x1U << RTC_DR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_DR_WDU_1 (0x2U << RTC_DR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_DR_WDU_2 (0x4U << RTC_DR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_DR_MT_Pos (12U) +#define RTC_DR_MT_Msk (0x1UL << RTC_DR_MT_Pos) /*!< 0x00001000 */ +#define RTC_DR_MT RTC_DR_MT_Msk /*!< Month tens in BCD format */ +#define RTC_DR_MU_Pos (8U) +#define RTC_DR_MU_Msk (0xFUL << RTC_DR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_DR_MU RTC_DR_MU_Msk /*!< Month units in BCD format */ +#define RTC_DR_MU_0 (0x1U << RTC_DR_MU_Pos) /*!< 0x00000100 */ +#define RTC_DR_MU_1 (0x2U << RTC_DR_MU_Pos) /*!< 0x00000200 */ +#define RTC_DR_MU_2 (0x4U << RTC_DR_MU_Pos) /*!< 0x00000400 */ +#define RTC_DR_MU_3 (0x8U << RTC_DR_MU_Pos) /*!< 0x00000800 */ +#define RTC_DR_DT_Pos (4U) +#define RTC_DR_DT_Msk (0x3UL << RTC_DR_DT_Pos) /*!< 0x00000030 */ +#define RTC_DR_DT RTC_DR_DT_Msk /*!< Date tens in BCD format */ +#define RTC_DR_DT_0 (0x1U << RTC_DR_DT_Pos) /*!< 0x00000010 */ +#define RTC_DR_DT_1 (0x2U << RTC_DR_DT_Pos) /*!< 0x00000020 */ +#define RTC_DR_DU_Pos (0U) +#define RTC_DR_DU_Msk (0xFUL << RTC_DR_DU_Pos) /*!< 0x0000000F */ +#define RTC_DR_DU RTC_DR_DU_Msk /*!< Date units in BCD format */ +#define RTC_DR_DU_0 (0x1U << RTC_DR_DU_Pos) /*!< 0x00000001 */ +#define RTC_DR_DU_1 (0x2U << RTC_DR_DU_Pos) /*!< 0x00000002 */ +#define RTC_DR_DU_2 (0x4U << RTC_DR_DU_Pos) /*!< 0x00000004 */ +#define RTC_DR_DU_3 (0x8U << RTC_DR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_ITSE_Pos (24U) +#define RTC_CR_ITSE_Msk (0x1UL << RTC_CR_ITSE_Pos) /*!< 0x01000000 */ +#define RTC_CR_ITSE RTC_CR_ITSE_Msk /*!< Timestamp on internal event enable */ +#define RTC_CR_COE_Pos (23U) +#define RTC_CR_COE_Msk (0x1UL << RTC_CR_COE_Pos) /*!< 0x00800000 */ +#define RTC_CR_COE RTC_CR_COE_Msk /*!< Calibration output enable */ +#define RTC_CR_OSEL_Pos (21U) +#define RTC_CR_OSEL_Msk (0x3UL << RTC_CR_OSEL_Pos) /*!< 0x00600000 */ +#define RTC_CR_OSEL RTC_CR_OSEL_Msk /*!< Output selection */ +#define RTC_CR_OSEL_0 (0x1U << RTC_CR_OSEL_Pos) /*!< 0x00200000 */ +#define RTC_CR_OSEL_1 (0x2U << RTC_CR_OSEL_Pos) /*!< 0x00400000 */ +#define RTC_CR_POL_Pos (20U) +#define RTC_CR_POL_Msk (0x1UL << RTC_CR_POL_Pos) /*!< 0x00100000 */ +#define RTC_CR_POL RTC_CR_POL_Msk /*!< Ouput polarity */ +#define RTC_CR_COSEL_Pos (19U) +#define RTC_CR_COSEL_Msk (0x1UL << RTC_CR_COSEL_Pos) /*!< 0x00080000 */ +#define RTC_CR_COSEL RTC_CR_COSEL_Msk /*!< Calibration ouput selection */ +#define RTC_CR_BKP_Pos (18U) +#define RTC_CR_BKP_Msk (0x1UL << RTC_CR_BKP_Pos) /*!< 0x00040000 */ +#define RTC_CR_BKP RTC_CR_BKP_Msk /*!< Backup */ +#define RTC_CR_SUB1H_Pos (17U) +#define RTC_CR_SUB1H_Msk (0x1UL << RTC_CR_SUB1H_Pos) /*!< 0x00020000 */ +#define RTC_CR_SUB1H RTC_CR_SUB1H_Msk /*!< Subtract 1 hour (winter time change) */ +#define RTC_CR_ADD1H_Pos (16U) +#define RTC_CR_ADD1H_Msk (0x1UL << RTC_CR_ADD1H_Pos) /*!< 0x00010000 */ +#define RTC_CR_ADD1H RTC_CR_ADD1H_Msk /*!< Add 1 hour (summer time change) */ +#define RTC_CR_TSIE_Pos (15U) +#define RTC_CR_TSIE_Msk (0x1UL << RTC_CR_TSIE_Pos) /*!< 0x00008000 */ +#define RTC_CR_TSIE RTC_CR_TSIE_Msk /*!< Time-stamp interrupt enable */ +#define RTC_CR_WUTIE_Pos (14U) +#define RTC_CR_WUTIE_Msk (0x1UL << RTC_CR_WUTIE_Pos) /*!< 0x00004000 */ +#define RTC_CR_WUTIE RTC_CR_WUTIE_Msk /*!< Wakeup timer interrupt enable */ +#define RTC_CR_ALRBIE_Pos (13U) +#define RTC_CR_ALRBIE_Msk (0x1UL << RTC_CR_ALRBIE_Pos) /*!< 0x00002000 */ +#define RTC_CR_ALRBIE RTC_CR_ALRBIE_Msk /*!< Alarm B interrupt enable */ +#define RTC_CR_ALRAIE_Pos (12U) +#define RTC_CR_ALRAIE_Msk (0x1UL << RTC_CR_ALRAIE_Pos) /*!< 0x00001000 */ +#define RTC_CR_ALRAIE RTC_CR_ALRAIE_Msk /*!< Alarm A interrupt enable */ +#define RTC_CR_TSE_Pos (11U) +#define RTC_CR_TSE_Msk (0x1UL << RTC_CR_TSE_Pos) /*!< 0x00000800 */ +#define RTC_CR_TSE RTC_CR_TSE_Msk /*!< Timestamp on RTC TS input edge enable */ +#define RTC_CR_WUTE_Pos (10U) +#define RTC_CR_WUTE_Msk (0x1UL << RTC_CR_WUTE_Pos) /*!< 0x00000400 */ +#define RTC_CR_WUTE RTC_CR_WUTE_Msk /*!< Wakeup timer enable */ +#define RTC_CR_ALRBE_Pos (9U) +#define RTC_CR_ALRBE_Msk (0x1UL << RTC_CR_ALRBE_Pos) /*!< 0x00000200 */ +#define RTC_CR_ALRBE RTC_CR_ALRBE_Msk /*!< Alarm B enable */ +#define RTC_CR_ALRAE_Pos (8U) +#define RTC_CR_ALRAE_Msk (0x1UL << RTC_CR_ALRAE_Pos) /*!< 0x00000100 */ +#define RTC_CR_ALRAE RTC_CR_ALRAE_Msk /*!< Alarm A enable */ +#define RTC_CR_FMT_Pos (6U) +#define RTC_CR_FMT_Msk (0x1UL << RTC_CR_FMT_Pos) /*!< 0x00000040 */ +#define RTC_CR_FMT RTC_CR_FMT_Msk /*!< Hour AM/PM or 24H format */ +#define RTC_CR_BYPSHAD_Pos (5U) +#define RTC_CR_BYPSHAD_Msk (0x1UL << RTC_CR_BYPSHAD_Pos) /*!< 0x00000020 */ +#define RTC_CR_BYPSHAD RTC_CR_BYPSHAD_Msk /*!< Bypass the shadow registers */ +#define RTC_CR_REFCKON_Pos (4U) +#define RTC_CR_REFCKON_Msk (0x1UL << RTC_CR_REFCKON_Pos) /*!< 0x00000010 */ +#define RTC_CR_REFCKON RTC_CR_REFCKON_Msk /*!< RTC_REFIN reference clock detection enable (50 or 60 Hz) */ +#define RTC_CR_TSEDGE_Pos (3U) +#define RTC_CR_TSEDGE_Msk (0x1UL << RTC_CR_TSEDGE_Pos) /*!< 0x00000008 */ +#define RTC_CR_TSEDGE RTC_CR_TSEDGE_Msk /*!< Timestamp event active edge */ +#define RTC_CR_WUCKSEL_Pos (0U) +#define RTC_CR_WUCKSEL_Msk (0x7UL << RTC_CR_WUCKSEL_Pos) /*!< 0x00000007 */ +#define RTC_CR_WUCKSEL RTC_CR_WUCKSEL_Msk /*!< Wakekup clock selection */ +#define RTC_CR_WUCKSEL_0 (0x1U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000001 */ +#define RTC_CR_WUCKSEL_1 (0x2U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000002 */ +#define RTC_CR_WUCKSEL_2 (0x4U << RTC_CR_WUCKSEL_Pos) /*!< 0x00000004 */ + +/******************** Bits definition for RTC_ISR register ******************/ +#define RTC_ISR_ITSF_Pos (17U) +#define RTC_ISR_ITSF_Msk (0x1UL << RTC_ISR_ITSF_Pos) /*!< 0x00020000 */ +#define RTC_ISR_ITSF RTC_ISR_ITSF_Msk /*!< Internal timestamp flag */ +#define RTC_ISR_RECALPF_Pos (16U) +#define RTC_ISR_RECALPF_Msk (0x1UL << RTC_ISR_RECALPF_Pos) /*!< 0x00010000 */ +#define RTC_ISR_RECALPF RTC_ISR_RECALPF_Msk /*!< Recalibration pending flag */ +#define RTC_ISR_TAMP2F_Pos (14U) +#define RTC_ISR_TAMP2F_Msk (0x1UL << RTC_ISR_TAMP2F_Pos) /*!< 0x00004000 */ +#define RTC_ISR_TAMP2F RTC_ISR_TAMP2F_Msk /*!< RTC_TAMP2 detection flag */ +#define RTC_ISR_TSOVF_Pos (12U) +#define RTC_ISR_TSOVF_Msk (0x1UL << RTC_ISR_TSOVF_Pos) /*!< 0x00001000 */ +#define RTC_ISR_TSOVF RTC_ISR_TSOVF_Msk /*!< Timestamp overflow flag */ +#define RTC_ISR_TSF_Pos (11U) +#define RTC_ISR_TSF_Msk (0x1UL << RTC_ISR_TSF_Pos) /*!< 0x00000800 */ +#define RTC_ISR_TSF RTC_ISR_TSF_Msk /*!< Timestamp flag */ +#define RTC_ISR_WUTF_Pos (10U) +#define RTC_ISR_WUTF_Msk (0x1UL << RTC_ISR_WUTF_Pos) /*!< 0x00000400 */ +#define RTC_ISR_WUTF RTC_ISR_WUTF_Msk /*!< Wakeup timer flag */ +#define RTC_ISR_ALRBF_Pos (9U) +#define RTC_ISR_ALRBF_Msk (0x1UL << RTC_ISR_ALRBF_Pos) /*!< 0x00000200 */ +#define RTC_ISR_ALRBF RTC_ISR_ALRBF_Msk /*!< Alarm B flag */ +#define RTC_ISR_ALRAF_Pos (8U) +#define RTC_ISR_ALRAF_Msk (0x1UL << RTC_ISR_ALRAF_Pos) /*!< 0x00000100 */ +#define RTC_ISR_ALRAF RTC_ISR_ALRAF_Msk /*!< Alarm A flag */ +#define RTC_ISR_INIT_Pos (7U) +#define RTC_ISR_INIT_Msk (0x1UL << RTC_ISR_INIT_Pos) /*!< 0x00000080 */ +#define RTC_ISR_INIT RTC_ISR_INIT_Msk /*!< Initialization mode */ +#define RTC_ISR_INITF_Pos (6U) +#define RTC_ISR_INITF_Msk (0x1UL << RTC_ISR_INITF_Pos) /*!< 0x00000040 */ +#define RTC_ISR_INITF RTC_ISR_INITF_Msk /*!< Initialization flag */ +#define RTC_ISR_RSF_Pos (5U) +#define RTC_ISR_RSF_Msk (0x1UL << RTC_ISR_RSF_Pos) /*!< 0x00000020 */ +#define RTC_ISR_RSF RTC_ISR_RSF_Msk /*!< Registers synchronization flag */ +#define RTC_ISR_INITS_Pos (4U) +#define RTC_ISR_INITS_Msk (0x1UL << RTC_ISR_INITS_Pos) /*!< 0x00000010 */ +#define RTC_ISR_INITS RTC_ISR_INITS_Msk /*!< Initialization status flag */ +#define RTC_ISR_SHPF_Pos (3U) +#define RTC_ISR_SHPF_Msk (0x1UL << RTC_ISR_SHPF_Pos) /*!< 0x00000008 */ +#define RTC_ISR_SHPF RTC_ISR_SHPF_Msk /*!< Shift operation pending */ +#define RTC_ISR_WUTWF_Pos (2U) +#define RTC_ISR_WUTWF_Msk (0x1UL << RTC_ISR_WUTWF_Pos) /*!< 0x00000004 */ +#define RTC_ISR_WUTWF RTC_ISR_WUTWF_Msk /*!< Wakeup timer write flag */ +#define RTC_ISR_ALRBWF_Pos (1U) +#define RTC_ISR_ALRBWF_Msk (0x1UL << RTC_ISR_ALRBWF_Pos) /*!< 0x00000002 */ +#define RTC_ISR_ALRBWF RTC_ISR_ALRBWF_Msk /*!< Alarm B write flag */ +#define RTC_ISR_ALRAWF_Pos (0U) +#define RTC_ISR_ALRAWF_Msk (0x1UL << RTC_ISR_ALRAWF_Pos) /*!< 0x00000001 */ +#define RTC_ISR_ALRAWF RTC_ISR_ALRAWF_Msk /*!< Alarm A write flag */ + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A_Pos (16U) +#define RTC_PRER_PREDIV_A_Msk (0x7FUL << RTC_PRER_PREDIV_A_Pos) /*!< 0x007F0000 */ +#define RTC_PRER_PREDIV_A RTC_PRER_PREDIV_A_Msk /*!< Asynchronous prescaler factor */ +#define RTC_PRER_PREDIV_S_Pos (0U) +#define RTC_PRER_PREDIV_S_Msk (0x7FFFUL << RTC_PRER_PREDIV_S_Pos) /*!< 0x00007FFF */ +#define RTC_PRER_PREDIV_S RTC_PRER_PREDIV_S_Msk /*!< Synchronous prescaler factor */ + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT_Pos (0U) +#define RTC_WUTR_WUT_Msk (0xFFFFUL << RTC_WUTR_WUT_Pos) /*!< 0x0000FFFF */ +#define RTC_WUTR_WUT RTC_WUTR_WUT_Msk /*!< Wakeup auto-reload value bits */ + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4_Pos (31U) +#define RTC_ALRMAR_MSK4_Msk (0x1UL << RTC_ALRMAR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMAR_MSK4 RTC_ALRMAR_MSK4_Msk /*!< Alarm A date mask */ +#define RTC_ALRMAR_WDSEL_Pos (30U) +#define RTC_ALRMAR_WDSEL_Msk (0x1UL << RTC_ALRMAR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMAR_WDSEL RTC_ALRMAR_WDSEL_Msk /*!< Alarm A week day selection */ +#define RTC_ALRMAR_DT_Pos (28U) +#define RTC_ALRMAR_DT_Msk (0x3UL << RTC_ALRMAR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMAR_DT RTC_ALRMAR_DT_Msk /*!< Alarm A date tens in BCD format */ +#define RTC_ALRMAR_DT_0 (0x1U << RTC_ALRMAR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMAR_DT_1 (0x2U << RTC_ALRMAR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMAR_DU_Pos (24U) +#define RTC_ALRMAR_DU_Msk (0xFUL << RTC_ALRMAR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMAR_DU RTC_ALRMAR_DU_Msk /*!< Alarm A date units in BCD format */ +#define RTC_ALRMAR_DU_0 (0x1U << RTC_ALRMAR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMAR_DU_1 (0x2U << RTC_ALRMAR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMAR_DU_2 (0x4U << RTC_ALRMAR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMAR_DU_3 (0x8U << RTC_ALRMAR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMAR_MSK3_Pos (23U) +#define RTC_ALRMAR_MSK3_Msk (0x1UL << RTC_ALRMAR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMAR_MSK3 RTC_ALRMAR_MSK3_Msk /*!< Alarm A hours mask */ +#define RTC_ALRMAR_PM_Pos (22U) +#define RTC_ALRMAR_PM_Msk (0x1UL << RTC_ALRMAR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMAR_PM RTC_ALRMAR_PM_Msk /*!< Alarm A AM/PM or 24H format */ +#define RTC_ALRMAR_HT_Pos (20U) +#define RTC_ALRMAR_HT_Msk (0x3UL << RTC_ALRMAR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMAR_HT RTC_ALRMAR_HT_Msk /*!< Alarm A hour tens in BCD format */ +#define RTC_ALRMAR_HT_0 (0x1U << RTC_ALRMAR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMAR_HT_1 (0x2U << RTC_ALRMAR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMAR_HU_Pos (16U) +#define RTC_ALRMAR_HU_Msk (0xFUL << RTC_ALRMAR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMAR_HU RTC_ALRMAR_HU_Msk /*!< Alarm A hour units in BCD format */ +#define RTC_ALRMAR_HU_0 (0x1U << RTC_ALRMAR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMAR_HU_1 (0x2U << RTC_ALRMAR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMAR_HU_2 (0x4U << RTC_ALRMAR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMAR_HU_3 (0x8U << RTC_ALRMAR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMAR_MSK2_Pos (15U) +#define RTC_ALRMAR_MSK2_Msk (0x1UL << RTC_ALRMAR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMAR_MSK2 RTC_ALRMAR_MSK2_Msk /*!< Alarm A minutes mask */ +#define RTC_ALRMAR_MNT_Pos (12U) +#define RTC_ALRMAR_MNT_Msk (0x7UL << RTC_ALRMAR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMAR_MNT RTC_ALRMAR_MNT_Msk /*!< Alarm A minute tens in BCD format */ +#define RTC_ALRMAR_MNT_0 (0x1U << RTC_ALRMAR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMAR_MNT_1 (0x2U << RTC_ALRMAR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMAR_MNT_2 (0x4U << RTC_ALRMAR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMAR_MNU_Pos (8U) +#define RTC_ALRMAR_MNU_Msk (0xFUL << RTC_ALRMAR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMAR_MNU RTC_ALRMAR_MNU_Msk /*!< Alarm A minute units in BCD format */ +#define RTC_ALRMAR_MNU_0 (0x1U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMAR_MNU_1 (0x2U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMAR_MNU_2 (0x4U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMAR_MNU_3 (0x8U << RTC_ALRMAR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMAR_MSK1_Pos (7U) +#define RTC_ALRMAR_MSK1_Msk (0x1UL << RTC_ALRMAR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMAR_MSK1 RTC_ALRMAR_MSK1_Msk /*!< Alarm A seconds mask */ +#define RTC_ALRMAR_ST_Pos (4U) +#define RTC_ALRMAR_ST_Msk (0x7UL << RTC_ALRMAR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMAR_ST RTC_ALRMAR_ST_Msk /*!< Alarm A second tens in BCD format */ +#define RTC_ALRMAR_ST_0 (0x1U << RTC_ALRMAR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMAR_ST_1 (0x2U << RTC_ALRMAR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMAR_ST_2 (0x4U << RTC_ALRMAR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMAR_SU_Pos (0U) +#define RTC_ALRMAR_SU_Msk (0xFUL << RTC_ALRMAR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMAR_SU RTC_ALRMAR_SU_Msk /*!< Alarm A second units in BCD format */ +#define RTC_ALRMAR_SU_0 (0x1U << RTC_ALRMAR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMAR_SU_1 (0x2U << RTC_ALRMAR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMAR_SU_2 (0x4U << RTC_ALRMAR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMAR_SU_3 (0x8U << RTC_ALRMAR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4_Pos (31U) +#define RTC_ALRMBR_MSK4_Msk (0x1UL << RTC_ALRMBR_MSK4_Pos) /*!< 0x80000000 */ +#define RTC_ALRMBR_MSK4 RTC_ALRMBR_MSK4_Msk /*!< Alarm B date mask */ +#define RTC_ALRMBR_WDSEL_Pos (30U) +#define RTC_ALRMBR_WDSEL_Msk (0x1UL << RTC_ALRMBR_WDSEL_Pos) /*!< 0x40000000 */ +#define RTC_ALRMBR_WDSEL RTC_ALRMBR_WDSEL_Msk /*!< Alarm B week day selection */ +#define RTC_ALRMBR_DT_Pos (28U) +#define RTC_ALRMBR_DT_Msk (0x3UL << RTC_ALRMBR_DT_Pos) /*!< 0x30000000 */ +#define RTC_ALRMBR_DT RTC_ALRMBR_DT_Msk /*!< Alarm B data tens in BCD format */ +#define RTC_ALRMBR_DT_0 (0x1U << RTC_ALRMBR_DT_Pos) /*!< 0x10000000 */ +#define RTC_ALRMBR_DT_1 (0x2U << RTC_ALRMBR_DT_Pos) /*!< 0x20000000 */ +#define RTC_ALRMBR_DU_Pos (24U) +#define RTC_ALRMBR_DU_Msk (0xFUL << RTC_ALRMBR_DU_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBR_DU RTC_ALRMBR_DU_Msk /*!< Alarm B data units or day in BCD format */ +#define RTC_ALRMBR_DU_0 (0x1U << RTC_ALRMBR_DU_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBR_DU_1 (0x2U << RTC_ALRMBR_DU_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBR_DU_2 (0x4U << RTC_ALRMBR_DU_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBR_DU_3 (0x8U << RTC_ALRMBR_DU_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBR_MSK3_Pos (23U) +#define RTC_ALRMBR_MSK3_Msk (0x1UL << RTC_ALRMBR_MSK3_Pos) /*!< 0x00800000 */ +#define RTC_ALRMBR_MSK3 RTC_ALRMBR_MSK3_Msk /*!< Alarm B hour mask */ +#define RTC_ALRMBR_PM_Pos (22U) +#define RTC_ALRMBR_PM_Msk (0x1UL << RTC_ALRMBR_PM_Pos) /*!< 0x00400000 */ +#define RTC_ALRMBR_PM RTC_ALRMBR_PM_Msk /*!< Alarm B AM/PM or 24H format */ +#define RTC_ALRMBR_HT_Pos (20U) +#define RTC_ALRMBR_HT_Msk (0x3UL << RTC_ALRMBR_HT_Pos) /*!< 0x00300000 */ +#define RTC_ALRMBR_HT RTC_ALRMBR_HT_Msk /*!< Alarm B hour tens in BCD format */ +#define RTC_ALRMBR_HT_0 (0x1U << RTC_ALRMBR_HT_Pos) /*!< 0x00100000 */ +#define RTC_ALRMBR_HT_1 (0x2U << RTC_ALRMBR_HT_Pos) /*!< 0x00200000 */ +#define RTC_ALRMBR_HU_Pos (16U) +#define RTC_ALRMBR_HU_Msk (0xFUL << RTC_ALRMBR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_ALRMBR_HU RTC_ALRMBR_HU_Msk /*!< Alarm B hour units in BCD format */ +#define RTC_ALRMBR_HU_0 (0x1U << RTC_ALRMBR_HU_Pos) /*!< 0x00010000 */ +#define RTC_ALRMBR_HU_1 (0x2U << RTC_ALRMBR_HU_Pos) /*!< 0x00020000 */ +#define RTC_ALRMBR_HU_2 (0x4U << RTC_ALRMBR_HU_Pos) /*!< 0x00040000 */ +#define RTC_ALRMBR_HU_3 (0x8U << RTC_ALRMBR_HU_Pos) /*!< 0x00080000 */ +#define RTC_ALRMBR_MSK2_Pos (15U) +#define RTC_ALRMBR_MSK2_Msk (0x1UL << RTC_ALRMBR_MSK2_Pos) /*!< 0x00008000 */ +#define RTC_ALRMBR_MSK2 RTC_ALRMBR_MSK2_Msk /*!< Alarm B minutes mask */ +#define RTC_ALRMBR_MNT_Pos (12U) +#define RTC_ALRMBR_MNT_Msk (0x7UL << RTC_ALRMBR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_ALRMBR_MNT RTC_ALRMBR_MNT_Msk /*!< Alarm B minute tens in BCD format */ +#define RTC_ALRMBR_MNT_0 (0x1U << RTC_ALRMBR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_ALRMBR_MNT_1 (0x2U << RTC_ALRMBR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_ALRMBR_MNT_2 (0x4U << RTC_ALRMBR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_ALRMBR_MNU_Pos (8U) +#define RTC_ALRMBR_MNU_Msk (0xFUL << RTC_ALRMBR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_ALRMBR_MNU RTC_ALRMBR_MNU_Msk /*!< Alarm B minute units in BCD format */ +#define RTC_ALRMBR_MNU_0 (0x1U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_ALRMBR_MNU_1 (0x2U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_ALRMBR_MNU_2 (0x4U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_ALRMBR_MNU_3 (0x8U << RTC_ALRMBR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_ALRMBR_MSK1_Pos (7U) +#define RTC_ALRMBR_MSK1_Msk (0x1UL << RTC_ALRMBR_MSK1_Pos) /*!< 0x00000080 */ +#define RTC_ALRMBR_MSK1 RTC_ALRMBR_MSK1_Msk /*!< Alarm B seconds mask */ +#define RTC_ALRMBR_ST_Pos (4U) +#define RTC_ALRMBR_ST_Msk (0x7UL << RTC_ALRMBR_ST_Pos) /*!< 0x00000070 */ +#define RTC_ALRMBR_ST RTC_ALRMBR_ST_Msk /*!< Alarm B second tens in BCD format */ +#define RTC_ALRMBR_ST_0 (0x1U << RTC_ALRMBR_ST_Pos) /*!< 0x00000010 */ +#define RTC_ALRMBR_ST_1 (0x2U << RTC_ALRMBR_ST_Pos) /*!< 0x00000020 */ +#define RTC_ALRMBR_ST_2 (0x4U << RTC_ALRMBR_ST_Pos) /*!< 0x00000040 */ +#define RTC_ALRMBR_SU_Pos (0U) +#define RTC_ALRMBR_SU_Msk (0xFUL << RTC_ALRMBR_SU_Pos) /*!< 0x0000000F */ +#define RTC_ALRMBR_SU RTC_ALRMBR_SU_Msk /*!< Alarm B second units in BCD format */ +#define RTC_ALRMBR_SU_0 (0x1U << RTC_ALRMBR_SU_Pos) /*!< 0x00000001 */ +#define RTC_ALRMBR_SU_1 (0x2U << RTC_ALRMBR_SU_Pos) /*!< 0x00000002 */ +#define RTC_ALRMBR_SU_2 (0x4U << RTC_ALRMBR_SU_Pos) /*!< 0x00000004 */ +#define RTC_ALRMBR_SU_3 (0x8U << RTC_ALRMBR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY_Pos (0U) +#define RTC_WPR_KEY_Msk (0xFFUL << RTC_WPR_KEY_Pos) /*!< 0x000000FF */ +#define RTC_WPR_KEY RTC_WPR_KEY_Msk /*!< Write protection key */ + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS_Pos (0U) +#define RTC_SSR_SS_Msk (0xFFFFUL << RTC_SSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_SSR_SS RTC_SSR_SS_Msk /*!< Sub second value */ + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS_Pos (0U) +#define RTC_SHIFTR_SUBFS_Msk (0x7FFFUL << RTC_SHIFTR_SUBFS_Pos) /*!< 0x00007FFF */ +#define RTC_SHIFTR_SUBFS RTC_SHIFTR_SUBFS_Msk /*!< Substract a fraction of a second */ +#define RTC_SHIFTR_ADD1S_Pos (31U) +#define RTC_SHIFTR_ADD1S_Msk (0x1UL << RTC_SHIFTR_ADD1S_Pos) /*!< 0x80000000 */ +#define RTC_SHIFTR_ADD1S RTC_SHIFTR_ADD1S_Msk /*!< Add on second */ + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM_Pos (22U) +#define RTC_TSTR_PM_Msk (0x1UL << RTC_TSTR_PM_Pos) /*!< 0x00400000 */ +#define RTC_TSTR_PM RTC_TSTR_PM_Msk /*!< Timestamp AM/PM or 24H format */ +#define RTC_TSTR_HT_Pos (20U) +#define RTC_TSTR_HT_Msk (0x3UL << RTC_TSTR_HT_Pos) /*!< 0x00300000 */ +#define RTC_TSTR_HT RTC_TSTR_HT_Msk /*!< Timestamp hour tens in BCD format */ +#define RTC_TSTR_HT_0 (0x1U << RTC_TSTR_HT_Pos) /*!< 0x00100000 */ +#define RTC_TSTR_HT_1 (0x2U << RTC_TSTR_HT_Pos) /*!< 0x00200000 */ +#define RTC_TSTR_HU_Pos (16U) +#define RTC_TSTR_HU_Msk (0xFUL << RTC_TSTR_HU_Pos) /*!< 0x000F0000 */ +#define RTC_TSTR_HU RTC_TSTR_HU_Msk /*!< Timestamp hour units in BCD format */ +#define RTC_TSTR_HU_0 (0x1U << RTC_TSTR_HU_Pos) /*!< 0x00010000 */ +#define RTC_TSTR_HU_1 (0x2U << RTC_TSTR_HU_Pos) /*!< 0x00020000 */ +#define RTC_TSTR_HU_2 (0x4U << RTC_TSTR_HU_Pos) /*!< 0x00040000 */ +#define RTC_TSTR_HU_3 (0x8U << RTC_TSTR_HU_Pos) /*!< 0x00080000 */ +#define RTC_TSTR_MNT_Pos (12U) +#define RTC_TSTR_MNT_Msk (0x7UL << RTC_TSTR_MNT_Pos) /*!< 0x00007000 */ +#define RTC_TSTR_MNT RTC_TSTR_MNT_Msk /*!< Timestamp minute tens in BCD format */ +#define RTC_TSTR_MNT_0 (0x1U << RTC_TSTR_MNT_Pos) /*!< 0x00001000 */ +#define RTC_TSTR_MNT_1 (0x2U << RTC_TSTR_MNT_Pos) /*!< 0x00002000 */ +#define RTC_TSTR_MNT_2 (0x4U << RTC_TSTR_MNT_Pos) /*!< 0x00004000 */ +#define RTC_TSTR_MNU_Pos (8U) +#define RTC_TSTR_MNU_Msk (0xFUL << RTC_TSTR_MNU_Pos) /*!< 0x00000F00 */ +#define RTC_TSTR_MNU RTC_TSTR_MNU_Msk /*!< Timestamp minute units in BCD format */ +#define RTC_TSTR_MNU_0 (0x1U << RTC_TSTR_MNU_Pos) /*!< 0x00000100 */ +#define RTC_TSTR_MNU_1 (0x2U << RTC_TSTR_MNU_Pos) /*!< 0x00000200 */ +#define RTC_TSTR_MNU_2 (0x4U << RTC_TSTR_MNU_Pos) /*!< 0x00000400 */ +#define RTC_TSTR_MNU_3 (0x8U << RTC_TSTR_MNU_Pos) /*!< 0x00000800 */ +#define RTC_TSTR_ST_Pos (4U) +#define RTC_TSTR_ST_Msk (0x7UL << RTC_TSTR_ST_Pos) /*!< 0x00000070 */ +#define RTC_TSTR_ST RTC_TSTR_ST_Msk /*!< Timestamp second tens in BCD format */ +#define RTC_TSTR_ST_0 (0x1U << RTC_TSTR_ST_Pos) /*!< 0x00000010 */ +#define RTC_TSTR_ST_1 (0x2U << RTC_TSTR_ST_Pos) /*!< 0x00000020 */ +#define RTC_TSTR_ST_2 (0x4U << RTC_TSTR_ST_Pos) /*!< 0x00000040 */ +#define RTC_TSTR_SU_Pos (0U) +#define RTC_TSTR_SU_Msk (0xFUL << RTC_TSTR_SU_Pos) /*!< 0x0000000F */ +#define RTC_TSTR_SU RTC_TSTR_SU_Msk /*!< Timestamp second units in BCD format */ +#define RTC_TSTR_SU_0 (0x1U << RTC_TSTR_SU_Pos) /*!< 0x00000001 */ +#define RTC_TSTR_SU_1 (0x2U << RTC_TSTR_SU_Pos) /*!< 0x00000002 */ +#define RTC_TSTR_SU_2 (0x4U << RTC_TSTR_SU_Pos) /*!< 0x00000004 */ +#define RTC_TSTR_SU_3 (0x8U << RTC_TSTR_SU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU_Pos (13U) +#define RTC_TSDR_WDU_Msk (0x7UL << RTC_TSDR_WDU_Pos) /*!< 0x0000E000 */ +#define RTC_TSDR_WDU RTC_TSDR_WDU_Msk /*!< Timestamp week day units */ +#define RTC_TSDR_WDU_0 (0x1U << RTC_TSDR_WDU_Pos) /*!< 0x00002000 */ +#define RTC_TSDR_WDU_1 (0x2U << RTC_TSDR_WDU_Pos) /*!< 0x00004000 */ +#define RTC_TSDR_WDU_2 (0x4U << RTC_TSDR_WDU_Pos) /*!< 0x00008000 */ +#define RTC_TSDR_MT_Pos (12U) +#define RTC_TSDR_MT_Msk (0x1UL << RTC_TSDR_MT_Pos) /*!< 0x00001000 */ +#define RTC_TSDR_MT RTC_TSDR_MT_Msk /*!< Timestamp month tens in BCD format */ +#define RTC_TSDR_MU_Pos (8U) +#define RTC_TSDR_MU_Msk (0xFUL << RTC_TSDR_MU_Pos) /*!< 0x00000F00 */ +#define RTC_TSDR_MU RTC_TSDR_MU_Msk /*!< Timestamp month units in BCD format */ +#define RTC_TSDR_MU_0 (0x1U << RTC_TSDR_MU_Pos) /*!< 0x00000100 */ +#define RTC_TSDR_MU_1 (0x2U << RTC_TSDR_MU_Pos) /*!< 0x00000200 */ +#define RTC_TSDR_MU_2 (0x4U << RTC_TSDR_MU_Pos) /*!< 0x00000400 */ +#define RTC_TSDR_MU_3 (0x8U << RTC_TSDR_MU_Pos) /*!< 0x00000800 */ +#define RTC_TSDR_DT_Pos (4U) +#define RTC_TSDR_DT_Msk (0x3UL << RTC_TSDR_DT_Pos) /*!< 0x00000030 */ +#define RTC_TSDR_DT RTC_TSDR_DT_Msk /*!< Timestamp date tens in BCD format */ +#define RTC_TSDR_DT_0 (0x1U << RTC_TSDR_DT_Pos) /*!< 0x00000010 */ +#define RTC_TSDR_DT_1 (0x2U << RTC_TSDR_DT_Pos) /*!< 0x00000020 */ +#define RTC_TSDR_DU_Pos (0U) +#define RTC_TSDR_DU_Msk (0xFUL << RTC_TSDR_DU_Pos) /*!< 0x0000000F */ +#define RTC_TSDR_DU RTC_TSDR_DU_Msk /*!< Timestamp date units in BCD format */ +#define RTC_TSDR_DU_0 (0x1U << RTC_TSDR_DU_Pos) /*!< 0x00000001 */ +#define RTC_TSDR_DU_1 (0x2U << RTC_TSDR_DU_Pos) /*!< 0x00000002 */ +#define RTC_TSDR_DU_2 (0x4U << RTC_TSDR_DU_Pos) /*!< 0x00000004 */ +#define RTC_TSDR_DU_3 (0x8U << RTC_TSDR_DU_Pos) /*!< 0x00000008 */ + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS_Pos (0U) +#define RTC_TSSSR_SS_Msk (0xFFFFUL << RTC_TSSSR_SS_Pos) /*!< 0x0000FFFF */ +#define RTC_TSSSR_SS RTC_TSSSR_SS_Msk /*!< Timestamp sub second value */ + +/******************** Bits definition for RTC_CALR register *****************/ +#define RTC_CALR_CALP_Pos (15U) +#define RTC_CALR_CALP_Msk (0x1UL << RTC_CALR_CALP_Pos) /*!< 0x00008000 */ +#define RTC_CALR_CALP RTC_CALR_CALP_Msk /*!< Increase frequency of RTC 488.5 ppm */ +#define RTC_CALR_CALW8_Pos (14U) +#define RTC_CALR_CALW8_Msk (0x1UL << RTC_CALR_CALW8_Pos) /*!< 0x00004000 */ +#define RTC_CALR_CALW8 RTC_CALR_CALW8_Msk /*!< Use a 8-second calibration cycle period */ +#define RTC_CALR_CALW16_Pos (13U) +#define RTC_CALR_CALW16_Msk (0x1UL << RTC_CALR_CALW16_Pos) /*!< 0x00002000 */ +#define RTC_CALR_CALW16 RTC_CALR_CALW16_Msk /*!< Use a 16-second calibration cycle period */ +#define RTC_CALR_CALM_Pos (0U) +#define RTC_CALR_CALM_Msk (0x1FFUL << RTC_CALR_CALM_Pos) /*!< 0x000001FF */ +#define RTC_CALR_CALM RTC_CALR_CALM_Msk /*!< Calibration minus */ +#define RTC_CALR_CALM_0 (0x001U << RTC_CALR_CALM_Pos) /*!< 0x00000001 */ +#define RTC_CALR_CALM_1 (0x002U << RTC_CALR_CALM_Pos) /*!< 0x00000002 */ +#define RTC_CALR_CALM_2 (0x004U << RTC_CALR_CALM_Pos) /*!< 0x00000004 */ +#define RTC_CALR_CALM_3 (0x008U << RTC_CALR_CALM_Pos) /*!< 0x00000008 */ +#define RTC_CALR_CALM_4 (0x010U << RTC_CALR_CALM_Pos) /*!< 0x00000010 */ +#define RTC_CALR_CALM_5 (0x020U << RTC_CALR_CALM_Pos) /*!< 0x00000020 */ +#define RTC_CALR_CALM_6 (0x040U << RTC_CALR_CALM_Pos) /*!< 0x00000040 */ +#define RTC_CALR_CALM_7 (0x080U << RTC_CALR_CALM_Pos) /*!< 0x00000080 */ +#define RTC_CALR_CALM_8 (0x100U << RTC_CALR_CALM_Pos) /*!< 0x00000100 */ + +/******************** Bits definition for RTC_TAMPCR register ****************/ +#define RTC_TAMPCR_TAMP2MF_Pos (21U) +#define RTC_TAMPCR_TAMP2MF_Msk (0x1UL << RTC_TAMPCR_TAMP2MF_Pos) /*!< 0x00200000 */ +#define RTC_TAMPCR_TAMP2MF RTC_TAMPCR_TAMP2MF_Msk /*!< Tamper 2 generates a trigger event */ +#define RTC_TAMPCR_TAMP2NOERASE_Pos (20U) +#define RTC_TAMPCR_TAMP2NOERASE_Msk (0x1UL << RTC_TAMPCR_TAMP2NOERASE_Pos) /*!< 0x00100000 */ +#define RTC_TAMPCR_TAMP2NOERASE RTC_TAMPCR_TAMP2NOERASE_Msk /*!< Tamper 2 no erase backup registers */ +#define RTC_TAMPCR_TAMP2IE_Pos (19U) +#define RTC_TAMPCR_TAMP2IE_Msk (0x1UL << RTC_TAMPCR_TAMP2IE_Pos) /*!< 0x00080000 */ +#define RTC_TAMPCR_TAMP2IE RTC_TAMPCR_TAMP2IE_Msk /*!< Tamper 2 interrupt enable */ +#define RTC_TAMPCR_TAMPPUDIS_Pos (15U) +#define RTC_TAMPCR_TAMPPUDIS_Msk (0x1UL << RTC_TAMPCR_TAMPPUDIS_Pos) /*!< 0x00008000 */ +#define RTC_TAMPCR_TAMPPUDIS RTC_TAMPCR_TAMPPUDIS_Msk /*!< RTC_TAMPx pull-up disable */ +#define RTC_TAMPCR_TAMPPRCH_Pos (13U) +#define RTC_TAMPCR_TAMPPRCH_Msk (0x3UL << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00006000 */ +#define RTC_TAMPCR_TAMPPRCH RTC_TAMPCR_TAMPPRCH_Msk /*!< RTC_TAMPx precharge duration */ +#define RTC_TAMPCR_TAMPPRCH_0 (0x1U << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00002000 */ +#define RTC_TAMPCR_TAMPPRCH_1 (0x2U << RTC_TAMPCR_TAMPPRCH_Pos) /*!< 0x00004000 */ +#define RTC_TAMPCR_TAMPFLT_Pos (11U) +#define RTC_TAMPCR_TAMPFLT_Msk (0x3UL << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001800 */ +#define RTC_TAMPCR_TAMPFLT RTC_TAMPCR_TAMPFLT_Msk /*!< RTC_TAMPx filter count */ +#define RTC_TAMPCR_TAMPFLT_0 (0x1U << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00000800 */ +#define RTC_TAMPCR_TAMPFLT_1 (0x2U << RTC_TAMPCR_TAMPFLT_Pos) /*!< 0x00001000 */ +#define RTC_TAMPCR_TAMPFREQ_Pos (8U) +#define RTC_TAMPCR_TAMPFREQ_Msk (0x7UL << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000700 */ +#define RTC_TAMPCR_TAMPFREQ RTC_TAMPCR_TAMPFREQ_Msk /*!< Tamper sampling frequency */ +#define RTC_TAMPCR_TAMPFREQ_0 (0x1U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000100 */ +#define RTC_TAMPCR_TAMPFREQ_1 (0x2U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000200 */ +#define RTC_TAMPCR_TAMPFREQ_2 (0x4U << RTC_TAMPCR_TAMPFREQ_Pos) /*!< 0x00000400 */ +#define RTC_TAMPCR_TAMPTS_Pos (7U) +#define RTC_TAMPCR_TAMPTS_Msk (0x1UL << RTC_TAMPCR_TAMPTS_Pos) /*!< 0x00000080 */ +#define RTC_TAMPCR_TAMPTS RTC_TAMPCR_TAMPTS_Msk /*!< Activate timestamp on tamper detection event */ +#define RTC_TAMPCR_TAMP2TRG_Pos (4U) +#define RTC_TAMPCR_TAMP2TRG_Msk (0x1UL << RTC_TAMPCR_TAMP2TRG_Pos) /*!< 0x00000010 */ +#define RTC_TAMPCR_TAMP2TRG RTC_TAMPCR_TAMP2TRG_Msk /*!< Active level for RTC_TAMP2 input */ +#define RTC_TAMPCR_TAMP2E_Pos (3U) +#define RTC_TAMPCR_TAMP2E_Msk (0x1UL << RTC_TAMPCR_TAMP2E_Pos) /*!< 0x00000008 */ +#define RTC_TAMPCR_TAMP2E RTC_TAMPCR_TAMP2E_Msk /*!< RTC_TAMP2 detection enable */ +#define RTC_TAMPCR_TAMPIE_Pos (2U) +#define RTC_TAMPCR_TAMPIE_Msk (0x1UL << RTC_TAMPCR_TAMPIE_Pos) /*!< 0x00000004 */ +#define RTC_TAMPCR_TAMPIE RTC_TAMPCR_TAMPIE_Msk /*!< Tampers interrupt enable */ + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS_Pos (24U) +#define RTC_ALRMASSR_MASKSS_Msk (0xFUL << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMASSR_MASKSS RTC_ALRMASSR_MASKSS_Msk /*!< Alarm A mask the most-significant bits starting at this bit */ +#define RTC_ALRMASSR_MASKSS_0 (0x1U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMASSR_MASKSS_1 (0x2U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMASSR_MASKSS_2 (0x4U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMASSR_MASKSS_3 (0x8U << RTC_ALRMASSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMASSR_SS_Pos (0U) /*!< Alarm A sub seconds value*/ +#define RTC_ALRMASSR_SS_Msk (0x7FFFUL << RTC_ALRMASSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMASSR_SS RTC_ALRMASSR_SS_Msk + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_MASKSS_Pos (24U) +#define RTC_ALRMBSSR_MASKSS_Msk (0xFUL << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x0F000000 */ +#define RTC_ALRMBSSR_MASKSS RTC_ALRMBSSR_MASKSS_Msk /*!< Alarm B mask the most-significant bits starting at this bit */ +#define RTC_ALRMBSSR_MASKSS_0 (0x1U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x01000000 */ +#define RTC_ALRMBSSR_MASKSS_1 (0x2U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x02000000 */ +#define RTC_ALRMBSSR_MASKSS_2 (0x4U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x04000000 */ +#define RTC_ALRMBSSR_MASKSS_3 (0x8U << RTC_ALRMBSSR_MASKSS_Pos) /*!< 0x08000000 */ +#define RTC_ALRMBSSR_SS_Pos (0U) /*!< Alarm B sub seconds value*/ +#define RTC_ALRMBSSR_SS_Msk (0x7FFFUL << RTC_ALRMBSSR_SS_Pos) /*!< 0x00007FFF */ +#define RTC_ALRMBSSR_SS RTC_ALRMBSSR_SS_Msk + +/******************** Bits definition for RTC_OR register ****************/ +#define RTC_OR_OUT_RMP_Pos (1U) +#define RTC_OR_OUT_RMP_Msk (0x1UL << RTC_OR_OUT_RMP_Pos) /*!< 0x00000002 */ +#define RTC_OR_OUT_RMP RTC_OR_OUT_RMP_Msk /*!< RTC_OUT remap */ + +/******************** Bits definition for RTC_BKP0R register ****************/ +#define RTC_BKP0R_Pos (0U) +#define RTC_BKP0R_Msk (0xFFFFFFFFUL << RTC_BKP0R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP0R RTC_BKP0R_Msk /*!< RTC backup register 0 */ + +/******************** Bits definition for RTC_BKP1R register ****************/ +#define RTC_BKP1R_Pos (0U) +#define RTC_BKP1R_Msk (0xFFFFFFFFUL << RTC_BKP1R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP1R RTC_BKP1R_Msk /*!< RTC backup register 1 */ + +/******************** Bits definition for RTC_BKP2R register ****************/ +#define RTC_BKP2R_Pos (0U) +#define RTC_BKP2R_Msk (0xFFFFFFFFUL << RTC_BKP2R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP2R RTC_BKP2R_Msk /*!< RTC backup register 2 */ + +/******************** Bits definition for RTC_BKP3R register ****************/ +#define RTC_BKP3R_Pos (0U) +#define RTC_BKP3R_Msk (0xFFFFFFFFUL << RTC_BKP3R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP3R RTC_BKP3R_Msk /*!< RTC backup register 3 */ + +/******************** Bits definition for RTC_BKP4R register ****************/ +#define RTC_BKP4R_Pos (0U) +#define RTC_BKP4R_Msk (0xFFFFFFFFUL << RTC_BKP4R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP4R RTC_BKP4R_Msk /*!< RTC backup register 4 */ + +/******************** Bits definition for RTC_BKP5R register ****************/ +#define RTC_BKP5R_Pos (0U) +#define RTC_BKP5R_Msk (0xFFFFFFFFUL << RTC_BKP5R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP5R RTC_BKP5R_Msk /*!< RTC backup register 5 */ + +/******************** Bits definition for RTC_BKP6R register ****************/ +#define RTC_BKP6R_Pos (0U) +#define RTC_BKP6R_Msk (0xFFFFFFFFUL << RTC_BKP6R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP6R RTC_BKP6R_Msk /*!< RTC backup register 6 */ + +/******************** Bits definition for RTC_BKP7R register ****************/ +#define RTC_BKP7R_Pos (0U) +#define RTC_BKP7R_Msk (0xFFFFFFFFUL << RTC_BKP7R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP7R RTC_BKP7R_Msk /*!< RTC backup register 7 */ + +/******************** Bits definition for RTC_BKP8R register ****************/ +#define RTC_BKP8R_Pos (0U) +#define RTC_BKP8R_Msk (0xFFFFFFFFUL << RTC_BKP8R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP8R RTC_BKP8R_Msk /*!< RTC backup register 8 */ + +/******************** Bits definition for RTC_BKP9R register ****************/ +#define RTC_BKP9R_Pos (0U) +#define RTC_BKP9R_Msk (0xFFFFFFFFUL << RTC_BKP9R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP9R RTC_BKP9R_Msk /*!< RTC backup register 9 */ + +/******************** Bits definition for RTC_BKP10R register ***************/ +#define RTC_BKP10R_Pos (0U) +#define RTC_BKP10R_Msk (0xFFFFFFFFUL << RTC_BKP10R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP10R RTC_BKP10R_Msk /*!< RTC backup register 10 */ + +/******************** Bits definition for RTC_BKP11R register ***************/ +#define RTC_BKP11R_Pos (0U) +#define RTC_BKP11R_Msk (0xFFFFFFFFUL << RTC_BKP11R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP11R RTC_BKP11R_Msk /*!< RTC backup register 11 */ + +/******************** Bits definition for RTC_BKP12R register ***************/ +#define RTC_BKP12R_Pos (0U) +#define RTC_BKP12R_Msk (0xFFFFFFFFUL << RTC_BKP12R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP12R RTC_BKP12R_Msk /*!< RTC backup register 12 */ + +/******************** Bits definition for RTC_BKP13R register ***************/ +#define RTC_BKP13R_Pos (0U) +#define RTC_BKP13R_Msk (0xFFFFFFFFUL << RTC_BKP13R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP13R RTC_BKP13R_Msk /*!< RTC backup register 13 */ + +/******************** Bits definition for RTC_BKP14R register ***************/ +#define RTC_BKP14R_Pos (0U) +#define RTC_BKP14R_Msk (0xFFFFFFFFUL << RTC_BKP14R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP14R RTC_BKP14R_Msk /*!< RTC backup register 14 */ + +/******************** Bits definition for RTC_BKP15R register ***************/ +#define RTC_BKP15R_Pos (0U) +#define RTC_BKP15R_Msk (0xFFFFFFFFUL << RTC_BKP15R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP15R RTC_BKP15R_Msk /*!< RTC backup register 15 */ + +/******************** Bits definition for RTC_BKP16R register ***************/ +#define RTC_BKP16R_Pos (0U) +#define RTC_BKP16R_Msk (0xFFFFFFFFUL << RTC_BKP16R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP16R RTC_BKP16R_Msk /*!< RTC backup register 16 */ + +/******************** Bits definition for RTC_BKP17R register ***************/ +#define RTC_BKP17R_Pos (0U) +#define RTC_BKP17R_Msk (0xFFFFFFFFUL << RTC_BKP17R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP17R RTC_BKP17R_Msk /*!< RTC backup register 17 */ + +/******************** Bits definition for RTC_BKP18R register ***************/ +#define RTC_BKP18R_Pos (0U) +#define RTC_BKP18R_Msk (0xFFFFFFFFUL << RTC_BKP18R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP18R RTC_BKP18R_Msk /*!< RTC backup register 18 */ + +/******************** Bits definition for RTC_BKP19R register ***************/ +#define RTC_BKP19R_Pos (0U) +#define RTC_BKP19R_Msk (0xFFFFFFFFUL << RTC_BKP19R_Pos) /*!< 0xFFFFFFFF */ +#define RTC_BKP19R RTC_BKP19R_Msk /*!< RTC backup register 19 */ + +/******************** Number of backup registers ******************************/ +#define RTC_BKP_NUMBER (20U) + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA_Pos (0U) +#define SPI_CR1_CPHA_Msk (0x1UL << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ +#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*!<Clock Phase */ +#define SPI_CR1_CPOL_Pos (1U) +#define SPI_CR1_CPOL_Msk (0x1UL << SPI_CR1_CPOL_Pos) /*!< 0x00000002 */ +#define SPI_CR1_CPOL SPI_CR1_CPOL_Msk /*!<Clock Polarity */ +#define SPI_CR1_MSTR_Pos (2U) +#define SPI_CR1_MSTR_Msk (0x1UL << SPI_CR1_MSTR_Pos) /*!< 0x00000004 */ +#define SPI_CR1_MSTR SPI_CR1_MSTR_Msk /*!<Master Selection */ + +#define SPI_CR1_BR_Pos (3U) +#define SPI_CR1_BR_Msk (0x7UL << SPI_CR1_BR_Pos) /*!< 0x00000038 */ +#define SPI_CR1_BR SPI_CR1_BR_Msk /*!<BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 (0x1UL << SPI_CR1_BR_Pos) /*!< 0x00000008 */ +#define SPI_CR1_BR_1 (0x2UL << SPI_CR1_BR_Pos) /*!< 0x00000010 */ +#define SPI_CR1_BR_2 (0x4UL << SPI_CR1_BR_Pos) /*!< 0x00000020 */ + +#define SPI_CR1_SPE_Pos (6U) +#define SPI_CR1_SPE_Msk (0x1UL << SPI_CR1_SPE_Pos) /*!< 0x00000040 */ +#define SPI_CR1_SPE SPI_CR1_SPE_Msk /*!<SPI Enable */ +#define SPI_CR1_LSBFIRST_Pos (7U) +#define SPI_CR1_LSBFIRST_Msk (0x1UL << SPI_CR1_LSBFIRST_Pos) /*!< 0x00000080 */ +#define SPI_CR1_LSBFIRST SPI_CR1_LSBFIRST_Msk /*!<Frame Format */ +#define SPI_CR1_SSI_Pos (8U) +#define SPI_CR1_SSI_Msk (0x1UL << SPI_CR1_SSI_Pos) /*!< 0x00000100 */ +#define SPI_CR1_SSI SPI_CR1_SSI_Msk /*!<Internal slave select */ +#define SPI_CR1_SSM_Pos (9U) +#define SPI_CR1_SSM_Msk (0x1UL << SPI_CR1_SSM_Pos) /*!< 0x00000200 */ +#define SPI_CR1_SSM SPI_CR1_SSM_Msk /*!<Software slave management */ +#define SPI_CR1_RXONLY_Pos (10U) +#define SPI_CR1_RXONLY_Msk (0x1UL << SPI_CR1_RXONLY_Pos) /*!< 0x00000400 */ +#define SPI_CR1_RXONLY SPI_CR1_RXONLY_Msk /*!<Receive only */ +#define SPI_CR1_CRCL_Pos (11U) +#define SPI_CR1_CRCL_Msk (0x1UL << SPI_CR1_CRCL_Pos) /*!< 0x00000800 */ +#define SPI_CR1_CRCL SPI_CR1_CRCL_Msk /*!< CRC Length */ +#define SPI_CR1_CRCNEXT_Pos (12U) +#define SPI_CR1_CRCNEXT_Msk (0x1UL << SPI_CR1_CRCNEXT_Pos) /*!< 0x00001000 */ +#define SPI_CR1_CRCNEXT SPI_CR1_CRCNEXT_Msk /*!<Transmit CRC next */ +#define SPI_CR1_CRCEN_Pos (13U) +#define SPI_CR1_CRCEN_Msk (0x1UL << SPI_CR1_CRCEN_Pos) /*!< 0x00002000 */ +#define SPI_CR1_CRCEN SPI_CR1_CRCEN_Msk /*!<Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE_Pos (14U) +#define SPI_CR1_BIDIOE_Msk (0x1UL << SPI_CR1_BIDIOE_Pos) /*!< 0x00004000 */ +#define SPI_CR1_BIDIOE SPI_CR1_BIDIOE_Msk /*!<Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE_Pos (15U) +#define SPI_CR1_BIDIMODE_Msk (0x1UL << SPI_CR1_BIDIMODE_Pos) /*!< 0x00008000 */ +#define SPI_CR1_BIDIMODE SPI_CR1_BIDIMODE_Msk /*!<Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN_Pos (0U) +#define SPI_CR2_RXDMAEN_Msk (0x1UL << SPI_CR2_RXDMAEN_Pos) /*!< 0x00000001 */ +#define SPI_CR2_RXDMAEN SPI_CR2_RXDMAEN_Msk /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN_Pos (1U) +#define SPI_CR2_TXDMAEN_Msk (0x1UL << SPI_CR2_TXDMAEN_Pos) /*!< 0x00000002 */ +#define SPI_CR2_TXDMAEN SPI_CR2_TXDMAEN_Msk /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE_Pos (2U) +#define SPI_CR2_SSOE_Msk (0x1UL << SPI_CR2_SSOE_Pos) /*!< 0x00000004 */ +#define SPI_CR2_SSOE SPI_CR2_SSOE_Msk /*!< SS Output Enable */ +#define SPI_CR2_NSSP_Pos (3U) +#define SPI_CR2_NSSP_Msk (0x1UL << SPI_CR2_NSSP_Pos) /*!< 0x00000008 */ +#define SPI_CR2_NSSP SPI_CR2_NSSP_Msk /*!< NSS pulse management Enable */ +#define SPI_CR2_FRF_Pos (4U) +#define SPI_CR2_FRF_Msk (0x1UL << SPI_CR2_FRF_Pos) /*!< 0x00000010 */ +#define SPI_CR2_FRF SPI_CR2_FRF_Msk /*!< Frame Format Enable */ +#define SPI_CR2_ERRIE_Pos (5U) +#define SPI_CR2_ERRIE_Msk (0x1UL << SPI_CR2_ERRIE_Pos) /*!< 0x00000020 */ +#define SPI_CR2_ERRIE SPI_CR2_ERRIE_Msk /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE_Pos (6U) +#define SPI_CR2_RXNEIE_Msk (0x1UL << SPI_CR2_RXNEIE_Pos) /*!< 0x00000040 */ +#define SPI_CR2_RXNEIE SPI_CR2_RXNEIE_Msk /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE_Pos (7U) +#define SPI_CR2_TXEIE_Msk (0x1UL << SPI_CR2_TXEIE_Pos) /*!< 0x00000080 */ +#define SPI_CR2_TXEIE SPI_CR2_TXEIE_Msk /*!< Tx buffer Empty Interrupt Enable */ +#define SPI_CR2_DS_Pos (8U) +#define SPI_CR2_DS_Msk (0xFUL << SPI_CR2_DS_Pos) /*!< 0x00000F00 */ +#define SPI_CR2_DS SPI_CR2_DS_Msk /*!< DS[3:0] Data Size */ +#define SPI_CR2_DS_0 (0x1UL << SPI_CR2_DS_Pos) /*!< 0x00000100 */ +#define SPI_CR2_DS_1 (0x2UL << SPI_CR2_DS_Pos) /*!< 0x00000200 */ +#define SPI_CR2_DS_2 (0x4UL << SPI_CR2_DS_Pos) /*!< 0x00000400 */ +#define SPI_CR2_DS_3 (0x8UL << SPI_CR2_DS_Pos) /*!< 0x00000800 */ +#define SPI_CR2_FRXTH_Pos (12U) +#define SPI_CR2_FRXTH_Msk (0x1UL << SPI_CR2_FRXTH_Pos) /*!< 0x00001000 */ +#define SPI_CR2_FRXTH SPI_CR2_FRXTH_Msk /*!< FIFO reception Threshold */ +#define SPI_CR2_LDMARX_Pos (13U) +#define SPI_CR2_LDMARX_Msk (0x1UL << SPI_CR2_LDMARX_Pos) /*!< 0x00002000 */ +#define SPI_CR2_LDMARX SPI_CR2_LDMARX_Msk /*!< Last DMA transfer for reception */ +#define SPI_CR2_LDMATX_Pos (14U) +#define SPI_CR2_LDMATX_Msk (0x1UL << SPI_CR2_LDMATX_Pos) /*!< 0x00004000 */ +#define SPI_CR2_LDMATX SPI_CR2_LDMATX_Msk /*!< Last DMA transfer for transmission */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE_Pos (0U) +#define SPI_SR_RXNE_Msk (0x1UL << SPI_SR_RXNE_Pos) /*!< 0x00000001 */ +#define SPI_SR_RXNE SPI_SR_RXNE_Msk /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE_Pos (1U) +#define SPI_SR_TXE_Msk (0x1UL << SPI_SR_TXE_Pos) /*!< 0x00000002 */ +#define SPI_SR_TXE SPI_SR_TXE_Msk /*!< Transmit buffer Empty */ +#define SPI_SR_CRCERR_Pos (4U) +#define SPI_SR_CRCERR_Msk (0x1UL << SPI_SR_CRCERR_Pos) /*!< 0x00000010 */ +#define SPI_SR_CRCERR SPI_SR_CRCERR_Msk /*!< CRC Error flag */ +#define SPI_SR_MODF_Pos (5U) +#define SPI_SR_MODF_Msk (0x1UL << SPI_SR_MODF_Pos) /*!< 0x00000020 */ +#define SPI_SR_MODF SPI_SR_MODF_Msk /*!< Mode fault */ +#define SPI_SR_OVR_Pos (6U) +#define SPI_SR_OVR_Msk (0x1UL << SPI_SR_OVR_Pos) /*!< 0x00000040 */ +#define SPI_SR_OVR SPI_SR_OVR_Msk /*!< Overrun flag */ +#define SPI_SR_BSY_Pos (7U) +#define SPI_SR_BSY_Msk (0x1UL << SPI_SR_BSY_Pos) /*!< 0x00000080 */ +#define SPI_SR_BSY SPI_SR_BSY_Msk /*!< Busy flag */ +#define SPI_SR_FRE_Pos (8U) +#define SPI_SR_FRE_Msk (0x1UL << SPI_SR_FRE_Pos) /*!< 0x00000100 */ +#define SPI_SR_FRE SPI_SR_FRE_Msk /*!< TI frame format error */ +#define SPI_SR_FRLVL_Pos (9U) +#define SPI_SR_FRLVL_Msk (0x3UL << SPI_SR_FRLVL_Pos) /*!< 0x00000600 */ +#define SPI_SR_FRLVL SPI_SR_FRLVL_Msk /*!< FIFO Reception Level */ +#define SPI_SR_FRLVL_0 (0x1UL << SPI_SR_FRLVL_Pos) /*!< 0x00000200 */ +#define SPI_SR_FRLVL_1 (0x2UL << SPI_SR_FRLVL_Pos) /*!< 0x00000400 */ +#define SPI_SR_FTLVL_Pos (11U) +#define SPI_SR_FTLVL_Msk (0x3UL << SPI_SR_FTLVL_Pos) /*!< 0x00001800 */ +#define SPI_SR_FTLVL SPI_SR_FTLVL_Msk /*!< FIFO Transmission Level */ +#define SPI_SR_FTLVL_0 (0x1UL << SPI_SR_FTLVL_Pos) /*!< 0x00000800 */ +#define SPI_SR_FTLVL_1 (0x2UL << SPI_SR_FTLVL_Pos) /*!< 0x00001000 */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR_Pos (0U) +#define SPI_DR_DR_Msk (0xFFFFUL << SPI_DR_DR_Pos) /*!< 0x0000FFFF */ +#define SPI_DR_DR SPI_DR_DR_Msk /*!<Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY_Pos (0U) +#define SPI_CRCPR_CRCPOLY_Msk (0xFFFFUL << SPI_CRCPR_CRCPOLY_Pos) /*!< 0x0000FFFF */ +#define SPI_CRCPR_CRCPOLY SPI_CRCPR_CRCPOLY_Msk /*!<CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC_Pos (0U) +#define SPI_RXCRCR_RXCRC_Msk (0xFFFFUL << SPI_RXCRCR_RXCRC_Pos) /*!< 0x0000FFFF */ +#define SPI_RXCRCR_RXCRC SPI_RXCRCR_RXCRC_Msk /*!<Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC_Pos (0U) +#define SPI_TXCRCR_TXCRC_Msk (0xFFFFUL << SPI_TXCRCR_TXCRC_Pos) /*!< 0x0000FFFF */ +#define SPI_TXCRCR_TXCRC SPI_TXCRCR_TXCRC_Msk /*!<Tx CRC Register */ + +/******************************************************************************/ +/* */ +/* Touch Sensing Controller (TSC) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TSC_CR register *********************/ +#define TSC_CR_TSCE_Pos (0U) +#define TSC_CR_TSCE_Msk (0x1UL << TSC_CR_TSCE_Pos) /*!< 0x00000001 */ +#define TSC_CR_TSCE TSC_CR_TSCE_Msk /*!< Touch sensing controller enable */ +#define TSC_CR_START_Pos (1U) +#define TSC_CR_START_Msk (0x1UL << TSC_CR_START_Pos) /*!< 0x00000002 */ +#define TSC_CR_START TSC_CR_START_Msk /*!< Start a new acquisition */ +#define TSC_CR_AM_Pos (2U) +#define TSC_CR_AM_Msk (0x1UL << TSC_CR_AM_Pos) /*!< 0x00000004 */ +#define TSC_CR_AM TSC_CR_AM_Msk /*!< Acquisition mode */ +#define TSC_CR_SYNCPOL_Pos (3U) +#define TSC_CR_SYNCPOL_Msk (0x1UL << TSC_CR_SYNCPOL_Pos) /*!< 0x00000008 */ +#define TSC_CR_SYNCPOL TSC_CR_SYNCPOL_Msk /*!< Synchronization pin polarity */ +#define TSC_CR_IODEF_Pos (4U) +#define TSC_CR_IODEF_Msk (0x1UL << TSC_CR_IODEF_Pos) /*!< 0x00000010 */ +#define TSC_CR_IODEF TSC_CR_IODEF_Msk /*!< IO default mode */ + +#define TSC_CR_MCV_Pos (5U) +#define TSC_CR_MCV_Msk (0x7UL << TSC_CR_MCV_Pos) /*!< 0x000000E0 */ +#define TSC_CR_MCV TSC_CR_MCV_Msk /*!< MCV[2:0] bits (Max Count Value) */ +#define TSC_CR_MCV_0 (0x1U << TSC_CR_MCV_Pos) /*!< 0x00000020 */ +#define TSC_CR_MCV_1 (0x2U << TSC_CR_MCV_Pos) /*!< 0x00000040 */ +#define TSC_CR_MCV_2 (0x4U << TSC_CR_MCV_Pos) /*!< 0x00000080 */ + +#define TSC_CR_PGPSC_Pos (12U) +#define TSC_CR_PGPSC_Msk (0x7UL << TSC_CR_PGPSC_Pos) /*!< 0x00007000 */ +#define TSC_CR_PGPSC TSC_CR_PGPSC_Msk /*!< PGPSC[2:0] bits (Pulse Generator Prescaler) */ +#define TSC_CR_PGPSC_0 (0x1U << TSC_CR_PGPSC_Pos) /*!< 0x00001000 */ +#define TSC_CR_PGPSC_1 (0x2U << TSC_CR_PGPSC_Pos) /*!< 0x00002000 */ +#define TSC_CR_PGPSC_2 (0x4U << TSC_CR_PGPSC_Pos) /*!< 0x00004000 */ + +#define TSC_CR_SSPSC_Pos (15U) +#define TSC_CR_SSPSC_Msk (0x1UL << TSC_CR_SSPSC_Pos) /*!< 0x00008000 */ +#define TSC_CR_SSPSC TSC_CR_SSPSC_Msk /*!< Spread Spectrum Prescaler */ +#define TSC_CR_SSE_Pos (16U) +#define TSC_CR_SSE_Msk (0x1UL << TSC_CR_SSE_Pos) /*!< 0x00010000 */ +#define TSC_CR_SSE TSC_CR_SSE_Msk /*!< Spread Spectrum Enable */ + +#define TSC_CR_SSD_Pos (17U) +#define TSC_CR_SSD_Msk (0x7FUL << TSC_CR_SSD_Pos) /*!< 0x00FE0000 */ +#define TSC_CR_SSD TSC_CR_SSD_Msk /*!< SSD[6:0] bits (Spread Spectrum Deviation) */ +#define TSC_CR_SSD_0 (0x01U << TSC_CR_SSD_Pos) /*!< 0x00020000 */ +#define TSC_CR_SSD_1 (0x02U << TSC_CR_SSD_Pos) /*!< 0x00040000 */ +#define TSC_CR_SSD_2 (0x04U << TSC_CR_SSD_Pos) /*!< 0x00080000 */ +#define TSC_CR_SSD_3 (0x08U << TSC_CR_SSD_Pos) /*!< 0x00100000 */ +#define TSC_CR_SSD_4 (0x10U << TSC_CR_SSD_Pos) /*!< 0x00200000 */ +#define TSC_CR_SSD_5 (0x20U << TSC_CR_SSD_Pos) /*!< 0x00400000 */ +#define TSC_CR_SSD_6 (0x40U << TSC_CR_SSD_Pos) /*!< 0x00800000 */ + +#define TSC_CR_CTPL_Pos (24U) +#define TSC_CR_CTPL_Msk (0xFUL << TSC_CR_CTPL_Pos) /*!< 0x0F000000 */ +#define TSC_CR_CTPL TSC_CR_CTPL_Msk /*!< CTPL[3:0] bits (Charge Transfer pulse low) */ +#define TSC_CR_CTPL_0 (0x1U << TSC_CR_CTPL_Pos) /*!< 0x01000000 */ +#define TSC_CR_CTPL_1 (0x2U << TSC_CR_CTPL_Pos) /*!< 0x02000000 */ +#define TSC_CR_CTPL_2 (0x4U << TSC_CR_CTPL_Pos) /*!< 0x04000000 */ +#define TSC_CR_CTPL_3 (0x8U << TSC_CR_CTPL_Pos) /*!< 0x08000000 */ + +#define TSC_CR_CTPH_Pos (28U) +#define TSC_CR_CTPH_Msk (0xFUL << TSC_CR_CTPH_Pos) /*!< 0xF0000000 */ +#define TSC_CR_CTPH TSC_CR_CTPH_Msk /*!< CTPH[3:0] bits (Charge Transfer pulse high) */ +#define TSC_CR_CTPH_0 (0x1U << TSC_CR_CTPH_Pos) /*!< 0x10000000 */ +#define TSC_CR_CTPH_1 (0x2U << TSC_CR_CTPH_Pos) /*!< 0x20000000 */ +#define TSC_CR_CTPH_2 (0x4U << TSC_CR_CTPH_Pos) /*!< 0x40000000 */ +#define TSC_CR_CTPH_3 (0x8U << TSC_CR_CTPH_Pos) /*!< 0x80000000 */ + +/******************* Bit definition for TSC_IER register ********************/ +#define TSC_IER_EOAIE_Pos (0U) +#define TSC_IER_EOAIE_Msk (0x1UL << TSC_IER_EOAIE_Pos) /*!< 0x00000001 */ +#define TSC_IER_EOAIE TSC_IER_EOAIE_Msk /*!< End of acquisition interrupt enable */ +#define TSC_IER_MCEIE_Pos (1U) +#define TSC_IER_MCEIE_Msk (0x1UL << TSC_IER_MCEIE_Pos) /*!< 0x00000002 */ +#define TSC_IER_MCEIE TSC_IER_MCEIE_Msk /*!< Max count error interrupt enable */ + +/******************* Bit definition for TSC_ICR register ********************/ +#define TSC_ICR_EOAIC_Pos (0U) +#define TSC_ICR_EOAIC_Msk (0x1UL << TSC_ICR_EOAIC_Pos) /*!< 0x00000001 */ +#define TSC_ICR_EOAIC TSC_ICR_EOAIC_Msk /*!< End of acquisition interrupt clear */ +#define TSC_ICR_MCEIC_Pos (1U) +#define TSC_ICR_MCEIC_Msk (0x1UL << TSC_ICR_MCEIC_Pos) /*!< 0x00000002 */ +#define TSC_ICR_MCEIC TSC_ICR_MCEIC_Msk /*!< Max count error interrupt clear */ + +/******************* Bit definition for TSC_ISR register ********************/ +#define TSC_ISR_EOAF_Pos (0U) +#define TSC_ISR_EOAF_Msk (0x1UL << TSC_ISR_EOAF_Pos) /*!< 0x00000001 */ +#define TSC_ISR_EOAF TSC_ISR_EOAF_Msk /*!< End of acquisition flag */ +#define TSC_ISR_MCEF_Pos (1U) +#define TSC_ISR_MCEF_Msk (0x1UL << TSC_ISR_MCEF_Pos) /*!< 0x00000002 */ +#define TSC_ISR_MCEF TSC_ISR_MCEF_Msk /*!< Max count error flag */ + +/******************* Bit definition for TSC_IOHCR register ******************/ +#define TSC_IOHCR_G1_IO1_Pos (0U) +#define TSC_IOHCR_G1_IO1_Msk (0x1UL << TSC_IOHCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOHCR_G1_IO1 TSC_IOHCR_G1_IO1_Msk /*!< GROUP1_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO2_Pos (1U) +#define TSC_IOHCR_G1_IO2_Msk (0x1UL << TSC_IOHCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOHCR_G1_IO2 TSC_IOHCR_G1_IO2_Msk /*!< GROUP1_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO3_Pos (2U) +#define TSC_IOHCR_G1_IO3_Msk (0x1UL << TSC_IOHCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOHCR_G1_IO3 TSC_IOHCR_G1_IO3_Msk /*!< GROUP1_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G1_IO4_Pos (3U) +#define TSC_IOHCR_G1_IO4_Msk (0x1UL << TSC_IOHCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOHCR_G1_IO4 TSC_IOHCR_G1_IO4_Msk /*!< GROUP1_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO1_Pos (4U) +#define TSC_IOHCR_G2_IO1_Msk (0x1UL << TSC_IOHCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOHCR_G2_IO1 TSC_IOHCR_G2_IO1_Msk /*!< GROUP2_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO2_Pos (5U) +#define TSC_IOHCR_G2_IO2_Msk (0x1UL << TSC_IOHCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOHCR_G2_IO2 TSC_IOHCR_G2_IO2_Msk /*!< GROUP2_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO3_Pos (6U) +#define TSC_IOHCR_G2_IO3_Msk (0x1UL << TSC_IOHCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOHCR_G2_IO3 TSC_IOHCR_G2_IO3_Msk /*!< GROUP2_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G2_IO4_Pos (7U) +#define TSC_IOHCR_G2_IO4_Msk (0x1UL << TSC_IOHCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOHCR_G2_IO4 TSC_IOHCR_G2_IO4_Msk /*!< GROUP2_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO1_Pos (8U) +#define TSC_IOHCR_G3_IO1_Msk (0x1UL << TSC_IOHCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOHCR_G3_IO1 TSC_IOHCR_G3_IO1_Msk /*!< GROUP3_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO2_Pos (9U) +#define TSC_IOHCR_G3_IO2_Msk (0x1UL << TSC_IOHCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOHCR_G3_IO2 TSC_IOHCR_G3_IO2_Msk /*!< GROUP3_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO3_Pos (10U) +#define TSC_IOHCR_G3_IO3_Msk (0x1UL << TSC_IOHCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOHCR_G3_IO3 TSC_IOHCR_G3_IO3_Msk /*!< GROUP3_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G3_IO4_Pos (11U) +#define TSC_IOHCR_G3_IO4_Msk (0x1UL << TSC_IOHCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOHCR_G3_IO4 TSC_IOHCR_G3_IO4_Msk /*!< GROUP3_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO1_Pos (12U) +#define TSC_IOHCR_G4_IO1_Msk (0x1UL << TSC_IOHCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOHCR_G4_IO1 TSC_IOHCR_G4_IO1_Msk /*!< GROUP4_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO2_Pos (13U) +#define TSC_IOHCR_G4_IO2_Msk (0x1UL << TSC_IOHCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOHCR_G4_IO2 TSC_IOHCR_G4_IO2_Msk /*!< GROUP4_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO3_Pos (14U) +#define TSC_IOHCR_G4_IO3_Msk (0x1UL << TSC_IOHCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOHCR_G4_IO3 TSC_IOHCR_G4_IO3_Msk /*!< GROUP4_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G4_IO4_Pos (15U) +#define TSC_IOHCR_G4_IO4_Msk (0x1UL << TSC_IOHCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOHCR_G4_IO4 TSC_IOHCR_G4_IO4_Msk /*!< GROUP4_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO1_Pos (16U) +#define TSC_IOHCR_G5_IO1_Msk (0x1UL << TSC_IOHCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOHCR_G5_IO1 TSC_IOHCR_G5_IO1_Msk /*!< GROUP5_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO2_Pos (17U) +#define TSC_IOHCR_G5_IO2_Msk (0x1UL << TSC_IOHCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOHCR_G5_IO2 TSC_IOHCR_G5_IO2_Msk /*!< GROUP5_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO3_Pos (18U) +#define TSC_IOHCR_G5_IO3_Msk (0x1UL << TSC_IOHCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOHCR_G5_IO3 TSC_IOHCR_G5_IO3_Msk /*!< GROUP5_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G5_IO4_Pos (19U) +#define TSC_IOHCR_G5_IO4_Msk (0x1UL << TSC_IOHCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOHCR_G5_IO4 TSC_IOHCR_G5_IO4_Msk /*!< GROUP5_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO1_Pos (20U) +#define TSC_IOHCR_G6_IO1_Msk (0x1UL << TSC_IOHCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOHCR_G6_IO1 TSC_IOHCR_G6_IO1_Msk /*!< GROUP6_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO2_Pos (21U) +#define TSC_IOHCR_G6_IO2_Msk (0x1UL << TSC_IOHCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOHCR_G6_IO2 TSC_IOHCR_G6_IO2_Msk /*!< GROUP6_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO3_Pos (22U) +#define TSC_IOHCR_G6_IO3_Msk (0x1UL << TSC_IOHCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOHCR_G6_IO3 TSC_IOHCR_G6_IO3_Msk /*!< GROUP6_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G6_IO4_Pos (23U) +#define TSC_IOHCR_G6_IO4_Msk (0x1UL << TSC_IOHCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOHCR_G6_IO4 TSC_IOHCR_G6_IO4_Msk /*!< GROUP6_IO4 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO1_Pos (24U) +#define TSC_IOHCR_G7_IO1_Msk (0x1UL << TSC_IOHCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOHCR_G7_IO1 TSC_IOHCR_G7_IO1_Msk /*!< GROUP7_IO1 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO2_Pos (25U) +#define TSC_IOHCR_G7_IO2_Msk (0x1UL << TSC_IOHCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOHCR_G7_IO2 TSC_IOHCR_G7_IO2_Msk /*!< GROUP7_IO2 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO3_Pos (26U) +#define TSC_IOHCR_G7_IO3_Msk (0x1UL << TSC_IOHCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOHCR_G7_IO3 TSC_IOHCR_G7_IO3_Msk /*!< GROUP7_IO3 schmitt trigger hysteresis mode */ +#define TSC_IOHCR_G7_IO4_Pos (27U) +#define TSC_IOHCR_G7_IO4_Msk (0x1UL << TSC_IOHCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOHCR_G7_IO4 TSC_IOHCR_G7_IO4_Msk /*!< GROUP7_IO4 schmitt trigger hysteresis mode */ + +/******************* Bit definition for TSC_IOASCR register *****************/ +#define TSC_IOASCR_G1_IO1_Pos (0U) +#define TSC_IOASCR_G1_IO1_Msk (0x1UL << TSC_IOASCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOASCR_G1_IO1 TSC_IOASCR_G1_IO1_Msk /*!< GROUP1_IO1 analog switch enable */ +#define TSC_IOASCR_G1_IO2_Pos (1U) +#define TSC_IOASCR_G1_IO2_Msk (0x1UL << TSC_IOASCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOASCR_G1_IO2 TSC_IOASCR_G1_IO2_Msk /*!< GROUP1_IO2 analog switch enable */ +#define TSC_IOASCR_G1_IO3_Pos (2U) +#define TSC_IOASCR_G1_IO3_Msk (0x1UL << TSC_IOASCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOASCR_G1_IO3 TSC_IOASCR_G1_IO3_Msk /*!< GROUP1_IO3 analog switch enable */ +#define TSC_IOASCR_G1_IO4_Pos (3U) +#define TSC_IOASCR_G1_IO4_Msk (0x1UL << TSC_IOASCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOASCR_G1_IO4 TSC_IOASCR_G1_IO4_Msk /*!< GROUP1_IO4 analog switch enable */ +#define TSC_IOASCR_G2_IO1_Pos (4U) +#define TSC_IOASCR_G2_IO1_Msk (0x1UL << TSC_IOASCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOASCR_G2_IO1 TSC_IOASCR_G2_IO1_Msk /*!< GROUP2_IO1 analog switch enable */ +#define TSC_IOASCR_G2_IO2_Pos (5U) +#define TSC_IOASCR_G2_IO2_Msk (0x1UL << TSC_IOASCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOASCR_G2_IO2 TSC_IOASCR_G2_IO2_Msk /*!< GROUP2_IO2 analog switch enable */ +#define TSC_IOASCR_G2_IO3_Pos (6U) +#define TSC_IOASCR_G2_IO3_Msk (0x1UL << TSC_IOASCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOASCR_G2_IO3 TSC_IOASCR_G2_IO3_Msk /*!< GROUP2_IO3 analog switch enable */ +#define TSC_IOASCR_G2_IO4_Pos (7U) +#define TSC_IOASCR_G2_IO4_Msk (0x1UL << TSC_IOASCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOASCR_G2_IO4 TSC_IOASCR_G2_IO4_Msk /*!< GROUP2_IO4 analog switch enable */ +#define TSC_IOASCR_G3_IO1_Pos (8U) +#define TSC_IOASCR_G3_IO1_Msk (0x1UL << TSC_IOASCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOASCR_G3_IO1 TSC_IOASCR_G3_IO1_Msk /*!< GROUP3_IO1 analog switch enable */ +#define TSC_IOASCR_G3_IO2_Pos (9U) +#define TSC_IOASCR_G3_IO2_Msk (0x1UL << TSC_IOASCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOASCR_G3_IO2 TSC_IOASCR_G3_IO2_Msk /*!< GROUP3_IO2 analog switch enable */ +#define TSC_IOASCR_G3_IO3_Pos (10U) +#define TSC_IOASCR_G3_IO3_Msk (0x1UL << TSC_IOASCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOASCR_G3_IO3 TSC_IOASCR_G3_IO3_Msk /*!< GROUP3_IO3 analog switch enable */ +#define TSC_IOASCR_G3_IO4_Pos (11U) +#define TSC_IOASCR_G3_IO4_Msk (0x1UL << TSC_IOASCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOASCR_G3_IO4 TSC_IOASCR_G3_IO4_Msk /*!< GROUP3_IO4 analog switch enable */ +#define TSC_IOASCR_G4_IO1_Pos (12U) +#define TSC_IOASCR_G4_IO1_Msk (0x1UL << TSC_IOASCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOASCR_G4_IO1 TSC_IOASCR_G4_IO1_Msk /*!< GROUP4_IO1 analog switch enable */ +#define TSC_IOASCR_G4_IO2_Pos (13U) +#define TSC_IOASCR_G4_IO2_Msk (0x1UL << TSC_IOASCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOASCR_G4_IO2 TSC_IOASCR_G4_IO2_Msk /*!< GROUP4_IO2 analog switch enable */ +#define TSC_IOASCR_G4_IO3_Pos (14U) +#define TSC_IOASCR_G4_IO3_Msk (0x1UL << TSC_IOASCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOASCR_G4_IO3 TSC_IOASCR_G4_IO3_Msk /*!< GROUP4_IO3 analog switch enable */ +#define TSC_IOASCR_G4_IO4_Pos (15U) +#define TSC_IOASCR_G4_IO4_Msk (0x1UL << TSC_IOASCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOASCR_G4_IO4 TSC_IOASCR_G4_IO4_Msk /*!< GROUP4_IO4 analog switch enable */ +#define TSC_IOASCR_G5_IO1_Pos (16U) +#define TSC_IOASCR_G5_IO1_Msk (0x1UL << TSC_IOASCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOASCR_G5_IO1 TSC_IOASCR_G5_IO1_Msk /*!< GROUP5_IO1 analog switch enable */ +#define TSC_IOASCR_G5_IO2_Pos (17U) +#define TSC_IOASCR_G5_IO2_Msk (0x1UL << TSC_IOASCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOASCR_G5_IO2 TSC_IOASCR_G5_IO2_Msk /*!< GROUP5_IO2 analog switch enable */ +#define TSC_IOASCR_G5_IO3_Pos (18U) +#define TSC_IOASCR_G5_IO3_Msk (0x1UL << TSC_IOASCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOASCR_G5_IO3 TSC_IOASCR_G5_IO3_Msk /*!< GROUP5_IO3 analog switch enable */ +#define TSC_IOASCR_G5_IO4_Pos (19U) +#define TSC_IOASCR_G5_IO4_Msk (0x1UL << TSC_IOASCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOASCR_G5_IO4 TSC_IOASCR_G5_IO4_Msk /*!< GROUP5_IO4 analog switch enable */ +#define TSC_IOASCR_G6_IO1_Pos (20U) +#define TSC_IOASCR_G6_IO1_Msk (0x1UL << TSC_IOASCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOASCR_G6_IO1 TSC_IOASCR_G6_IO1_Msk /*!< GROUP6_IO1 analog switch enable */ +#define TSC_IOASCR_G6_IO2_Pos (21U) +#define TSC_IOASCR_G6_IO2_Msk (0x1UL << TSC_IOASCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOASCR_G6_IO2 TSC_IOASCR_G6_IO2_Msk /*!< GROUP6_IO2 analog switch enable */ +#define TSC_IOASCR_G6_IO3_Pos (22U) +#define TSC_IOASCR_G6_IO3_Msk (0x1UL << TSC_IOASCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOASCR_G6_IO3 TSC_IOASCR_G6_IO3_Msk /*!< GROUP6_IO3 analog switch enable */ +#define TSC_IOASCR_G6_IO4_Pos (23U) +#define TSC_IOASCR_G6_IO4_Msk (0x1UL << TSC_IOASCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOASCR_G6_IO4 TSC_IOASCR_G6_IO4_Msk /*!< GROUP6_IO4 analog switch enable */ +#define TSC_IOASCR_G7_IO1_Pos (24U) +#define TSC_IOASCR_G7_IO1_Msk (0x1UL << TSC_IOASCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOASCR_G7_IO1 TSC_IOASCR_G7_IO1_Msk /*!< GROUP7_IO1 analog switch enable */ +#define TSC_IOASCR_G7_IO2_Pos (25U) +#define TSC_IOASCR_G7_IO2_Msk (0x1UL << TSC_IOASCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOASCR_G7_IO2 TSC_IOASCR_G7_IO2_Msk /*!< GROUP7_IO2 analog switch enable */ +#define TSC_IOASCR_G7_IO3_Pos (26U) +#define TSC_IOASCR_G7_IO3_Msk (0x1UL << TSC_IOASCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOASCR_G7_IO3 TSC_IOASCR_G7_IO3_Msk /*!< GROUP7_IO3 analog switch enable */ +#define TSC_IOASCR_G7_IO4_Pos (27U) +#define TSC_IOASCR_G7_IO4_Msk (0x1UL << TSC_IOASCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOASCR_G7_IO4 TSC_IOASCR_G7_IO4_Msk /*!< GROUP7_IO4 analog switch enable */ + +/******************* Bit definition for TSC_IOSCR register ******************/ +#define TSC_IOSCR_G1_IO1_Pos (0U) +#define TSC_IOSCR_G1_IO1_Msk (0x1UL << TSC_IOSCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOSCR_G1_IO1 TSC_IOSCR_G1_IO1_Msk /*!< GROUP1_IO1 sampling mode */ +#define TSC_IOSCR_G1_IO2_Pos (1U) +#define TSC_IOSCR_G1_IO2_Msk (0x1UL << TSC_IOSCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOSCR_G1_IO2 TSC_IOSCR_G1_IO2_Msk /*!< GROUP1_IO2 sampling mode */ +#define TSC_IOSCR_G1_IO3_Pos (2U) +#define TSC_IOSCR_G1_IO3_Msk (0x1UL << TSC_IOSCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOSCR_G1_IO3 TSC_IOSCR_G1_IO3_Msk /*!< GROUP1_IO3 sampling mode */ +#define TSC_IOSCR_G1_IO4_Pos (3U) +#define TSC_IOSCR_G1_IO4_Msk (0x1UL << TSC_IOSCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOSCR_G1_IO4 TSC_IOSCR_G1_IO4_Msk /*!< GROUP1_IO4 sampling mode */ +#define TSC_IOSCR_G2_IO1_Pos (4U) +#define TSC_IOSCR_G2_IO1_Msk (0x1UL << TSC_IOSCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOSCR_G2_IO1 TSC_IOSCR_G2_IO1_Msk /*!< GROUP2_IO1 sampling mode */ +#define TSC_IOSCR_G2_IO2_Pos (5U) +#define TSC_IOSCR_G2_IO2_Msk (0x1UL << TSC_IOSCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOSCR_G2_IO2 TSC_IOSCR_G2_IO2_Msk /*!< GROUP2_IO2 sampling mode */ +#define TSC_IOSCR_G2_IO3_Pos (6U) +#define TSC_IOSCR_G2_IO3_Msk (0x1UL << TSC_IOSCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOSCR_G2_IO3 TSC_IOSCR_G2_IO3_Msk /*!< GROUP2_IO3 sampling mode */ +#define TSC_IOSCR_G2_IO4_Pos (7U) +#define TSC_IOSCR_G2_IO4_Msk (0x1UL << TSC_IOSCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOSCR_G2_IO4 TSC_IOSCR_G2_IO4_Msk /*!< GROUP2_IO4 sampling mode */ +#define TSC_IOSCR_G3_IO1_Pos (8U) +#define TSC_IOSCR_G3_IO1_Msk (0x1UL << TSC_IOSCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOSCR_G3_IO1 TSC_IOSCR_G3_IO1_Msk /*!< GROUP3_IO1 sampling mode */ +#define TSC_IOSCR_G3_IO2_Pos (9U) +#define TSC_IOSCR_G3_IO2_Msk (0x1UL << TSC_IOSCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOSCR_G3_IO2 TSC_IOSCR_G3_IO2_Msk /*!< GROUP3_IO2 sampling mode */ +#define TSC_IOSCR_G3_IO3_Pos (10U) +#define TSC_IOSCR_G3_IO3_Msk (0x1UL << TSC_IOSCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOSCR_G3_IO3 TSC_IOSCR_G3_IO3_Msk /*!< GROUP3_IO3 sampling mode */ +#define TSC_IOSCR_G3_IO4_Pos (11U) +#define TSC_IOSCR_G3_IO4_Msk (0x1UL << TSC_IOSCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOSCR_G3_IO4 TSC_IOSCR_G3_IO4_Msk /*!< GROUP3_IO4 sampling mode */ +#define TSC_IOSCR_G4_IO1_Pos (12U) +#define TSC_IOSCR_G4_IO1_Msk (0x1UL << TSC_IOSCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOSCR_G4_IO1 TSC_IOSCR_G4_IO1_Msk /*!< GROUP4_IO1 sampling mode */ +#define TSC_IOSCR_G4_IO2_Pos (13U) +#define TSC_IOSCR_G4_IO2_Msk (0x1UL << TSC_IOSCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOSCR_G4_IO2 TSC_IOSCR_G4_IO2_Msk /*!< GROUP4_IO2 sampling mode */ +#define TSC_IOSCR_G4_IO3_Pos (14U) +#define TSC_IOSCR_G4_IO3_Msk (0x1UL << TSC_IOSCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOSCR_G4_IO3 TSC_IOSCR_G4_IO3_Msk /*!< GROUP4_IO3 sampling mode */ +#define TSC_IOSCR_G4_IO4_Pos (15U) +#define TSC_IOSCR_G4_IO4_Msk (0x1UL << TSC_IOSCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOSCR_G4_IO4 TSC_IOSCR_G4_IO4_Msk /*!< GROUP4_IO4 sampling mode */ +#define TSC_IOSCR_G5_IO1_Pos (16U) +#define TSC_IOSCR_G5_IO1_Msk (0x1UL << TSC_IOSCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOSCR_G5_IO1 TSC_IOSCR_G5_IO1_Msk /*!< GROUP5_IO1 sampling mode */ +#define TSC_IOSCR_G5_IO2_Pos (17U) +#define TSC_IOSCR_G5_IO2_Msk (0x1UL << TSC_IOSCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOSCR_G5_IO2 TSC_IOSCR_G5_IO2_Msk /*!< GROUP5_IO2 sampling mode */ +#define TSC_IOSCR_G5_IO3_Pos (18U) +#define TSC_IOSCR_G5_IO3_Msk (0x1UL << TSC_IOSCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOSCR_G5_IO3 TSC_IOSCR_G5_IO3_Msk /*!< GROUP5_IO3 sampling mode */ +#define TSC_IOSCR_G5_IO4_Pos (19U) +#define TSC_IOSCR_G5_IO4_Msk (0x1UL << TSC_IOSCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOSCR_G5_IO4 TSC_IOSCR_G5_IO4_Msk /*!< GROUP5_IO4 sampling mode */ +#define TSC_IOSCR_G6_IO1_Pos (20U) +#define TSC_IOSCR_G6_IO1_Msk (0x1UL << TSC_IOSCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOSCR_G6_IO1 TSC_IOSCR_G6_IO1_Msk /*!< GROUP6_IO1 sampling mode */ +#define TSC_IOSCR_G6_IO2_Pos (21U) +#define TSC_IOSCR_G6_IO2_Msk (0x1UL << TSC_IOSCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOSCR_G6_IO2 TSC_IOSCR_G6_IO2_Msk /*!< GROUP6_IO2 sampling mode */ +#define TSC_IOSCR_G6_IO3_Pos (22U) +#define TSC_IOSCR_G6_IO3_Msk (0x1UL << TSC_IOSCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOSCR_G6_IO3 TSC_IOSCR_G6_IO3_Msk /*!< GROUP6_IO3 sampling mode */ +#define TSC_IOSCR_G6_IO4_Pos (23U) +#define TSC_IOSCR_G6_IO4_Msk (0x1UL << TSC_IOSCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOSCR_G6_IO4 TSC_IOSCR_G6_IO4_Msk /*!< GROUP6_IO4 sampling mode */ +#define TSC_IOSCR_G7_IO1_Pos (24U) +#define TSC_IOSCR_G7_IO1_Msk (0x1UL << TSC_IOSCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOSCR_G7_IO1 TSC_IOSCR_G7_IO1_Msk /*!< GROUP7_IO1 sampling mode */ +#define TSC_IOSCR_G7_IO2_Pos (25U) +#define TSC_IOSCR_G7_IO2_Msk (0x1UL << TSC_IOSCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOSCR_G7_IO2 TSC_IOSCR_G7_IO2_Msk /*!< GROUP7_IO2 sampling mode */ +#define TSC_IOSCR_G7_IO3_Pos (26U) +#define TSC_IOSCR_G7_IO3_Msk (0x1UL << TSC_IOSCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOSCR_G7_IO3 TSC_IOSCR_G7_IO3_Msk /*!< GROUP7_IO3 sampling mode */ +#define TSC_IOSCR_G7_IO4_Pos (27U) +#define TSC_IOSCR_G7_IO4_Msk (0x1UL << TSC_IOSCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOSCR_G7_IO4 TSC_IOSCR_G7_IO4_Msk /*!< GROUP7_IO4 sampling mode */ + +/******************* Bit definition for TSC_IOCCR register ******************/ +#define TSC_IOCCR_G1_IO1_Pos (0U) +#define TSC_IOCCR_G1_IO1_Msk (0x1UL << TSC_IOCCR_G1_IO1_Pos) /*!< 0x00000001 */ +#define TSC_IOCCR_G1_IO1 TSC_IOCCR_G1_IO1_Msk /*!< GROUP1_IO1 channel mode */ +#define TSC_IOCCR_G1_IO2_Pos (1U) +#define TSC_IOCCR_G1_IO2_Msk (0x1UL << TSC_IOCCR_G1_IO2_Pos) /*!< 0x00000002 */ +#define TSC_IOCCR_G1_IO2 TSC_IOCCR_G1_IO2_Msk /*!< GROUP1_IO2 channel mode */ +#define TSC_IOCCR_G1_IO3_Pos (2U) +#define TSC_IOCCR_G1_IO3_Msk (0x1UL << TSC_IOCCR_G1_IO3_Pos) /*!< 0x00000004 */ +#define TSC_IOCCR_G1_IO3 TSC_IOCCR_G1_IO3_Msk /*!< GROUP1_IO3 channel mode */ +#define TSC_IOCCR_G1_IO4_Pos (3U) +#define TSC_IOCCR_G1_IO4_Msk (0x1UL << TSC_IOCCR_G1_IO4_Pos) /*!< 0x00000008 */ +#define TSC_IOCCR_G1_IO4 TSC_IOCCR_G1_IO4_Msk /*!< GROUP1_IO4 channel mode */ +#define TSC_IOCCR_G2_IO1_Pos (4U) +#define TSC_IOCCR_G2_IO1_Msk (0x1UL << TSC_IOCCR_G2_IO1_Pos) /*!< 0x00000010 */ +#define TSC_IOCCR_G2_IO1 TSC_IOCCR_G2_IO1_Msk /*!< GROUP2_IO1 channel mode */ +#define TSC_IOCCR_G2_IO2_Pos (5U) +#define TSC_IOCCR_G2_IO2_Msk (0x1UL << TSC_IOCCR_G2_IO2_Pos) /*!< 0x00000020 */ +#define TSC_IOCCR_G2_IO2 TSC_IOCCR_G2_IO2_Msk /*!< GROUP2_IO2 channel mode */ +#define TSC_IOCCR_G2_IO3_Pos (6U) +#define TSC_IOCCR_G2_IO3_Msk (0x1UL << TSC_IOCCR_G2_IO3_Pos) /*!< 0x00000040 */ +#define TSC_IOCCR_G2_IO3 TSC_IOCCR_G2_IO3_Msk /*!< GROUP2_IO3 channel mode */ +#define TSC_IOCCR_G2_IO4_Pos (7U) +#define TSC_IOCCR_G2_IO4_Msk (0x1UL << TSC_IOCCR_G2_IO4_Pos) /*!< 0x00000080 */ +#define TSC_IOCCR_G2_IO4 TSC_IOCCR_G2_IO4_Msk /*!< GROUP2_IO4 channel mode */ +#define TSC_IOCCR_G3_IO1_Pos (8U) +#define TSC_IOCCR_G3_IO1_Msk (0x1UL << TSC_IOCCR_G3_IO1_Pos) /*!< 0x00000100 */ +#define TSC_IOCCR_G3_IO1 TSC_IOCCR_G3_IO1_Msk /*!< GROUP3_IO1 channel mode */ +#define TSC_IOCCR_G3_IO2_Pos (9U) +#define TSC_IOCCR_G3_IO2_Msk (0x1UL << TSC_IOCCR_G3_IO2_Pos) /*!< 0x00000200 */ +#define TSC_IOCCR_G3_IO2 TSC_IOCCR_G3_IO2_Msk /*!< GROUP3_IO2 channel mode */ +#define TSC_IOCCR_G3_IO3_Pos (10U) +#define TSC_IOCCR_G3_IO3_Msk (0x1UL << TSC_IOCCR_G3_IO3_Pos) /*!< 0x00000400 */ +#define TSC_IOCCR_G3_IO3 TSC_IOCCR_G3_IO3_Msk /*!< GROUP3_IO3 channel mode */ +#define TSC_IOCCR_G3_IO4_Pos (11U) +#define TSC_IOCCR_G3_IO4_Msk (0x1UL << TSC_IOCCR_G3_IO4_Pos) /*!< 0x00000800 */ +#define TSC_IOCCR_G3_IO4 TSC_IOCCR_G3_IO4_Msk /*!< GROUP3_IO4 channel mode */ +#define TSC_IOCCR_G4_IO1_Pos (12U) +#define TSC_IOCCR_G4_IO1_Msk (0x1UL << TSC_IOCCR_G4_IO1_Pos) /*!< 0x00001000 */ +#define TSC_IOCCR_G4_IO1 TSC_IOCCR_G4_IO1_Msk /*!< GROUP4_IO1 channel mode */ +#define TSC_IOCCR_G4_IO2_Pos (13U) +#define TSC_IOCCR_G4_IO2_Msk (0x1UL << TSC_IOCCR_G4_IO2_Pos) /*!< 0x00002000 */ +#define TSC_IOCCR_G4_IO2 TSC_IOCCR_G4_IO2_Msk /*!< GROUP4_IO2 channel mode */ +#define TSC_IOCCR_G4_IO3_Pos (14U) +#define TSC_IOCCR_G4_IO3_Msk (0x1UL << TSC_IOCCR_G4_IO3_Pos) /*!< 0x00004000 */ +#define TSC_IOCCR_G4_IO3 TSC_IOCCR_G4_IO3_Msk /*!< GROUP4_IO3 channel mode */ +#define TSC_IOCCR_G4_IO4_Pos (15U) +#define TSC_IOCCR_G4_IO4_Msk (0x1UL << TSC_IOCCR_G4_IO4_Pos) /*!< 0x00008000 */ +#define TSC_IOCCR_G4_IO4 TSC_IOCCR_G4_IO4_Msk /*!< GROUP4_IO4 channel mode */ +#define TSC_IOCCR_G5_IO1_Pos (16U) +#define TSC_IOCCR_G5_IO1_Msk (0x1UL << TSC_IOCCR_G5_IO1_Pos) /*!< 0x00010000 */ +#define TSC_IOCCR_G5_IO1 TSC_IOCCR_G5_IO1_Msk /*!< GROUP5_IO1 channel mode */ +#define TSC_IOCCR_G5_IO2_Pos (17U) +#define TSC_IOCCR_G5_IO2_Msk (0x1UL << TSC_IOCCR_G5_IO2_Pos) /*!< 0x00020000 */ +#define TSC_IOCCR_G5_IO2 TSC_IOCCR_G5_IO2_Msk /*!< GROUP5_IO2 channel mode */ +#define TSC_IOCCR_G5_IO3_Pos (18U) +#define TSC_IOCCR_G5_IO3_Msk (0x1UL << TSC_IOCCR_G5_IO3_Pos) /*!< 0x00040000 */ +#define TSC_IOCCR_G5_IO3 TSC_IOCCR_G5_IO3_Msk /*!< GROUP5_IO3 channel mode */ +#define TSC_IOCCR_G5_IO4_Pos (19U) +#define TSC_IOCCR_G5_IO4_Msk (0x1UL << TSC_IOCCR_G5_IO4_Pos) /*!< 0x00080000 */ +#define TSC_IOCCR_G5_IO4 TSC_IOCCR_G5_IO4_Msk /*!< GROUP5_IO4 channel mode */ +#define TSC_IOCCR_G6_IO1_Pos (20U) +#define TSC_IOCCR_G6_IO1_Msk (0x1UL << TSC_IOCCR_G6_IO1_Pos) /*!< 0x00100000 */ +#define TSC_IOCCR_G6_IO1 TSC_IOCCR_G6_IO1_Msk /*!< GROUP6_IO1 channel mode */ +#define TSC_IOCCR_G6_IO2_Pos (21U) +#define TSC_IOCCR_G6_IO2_Msk (0x1UL << TSC_IOCCR_G6_IO2_Pos) /*!< 0x00200000 */ +#define TSC_IOCCR_G6_IO2 TSC_IOCCR_G6_IO2_Msk /*!< GROUP6_IO2 channel mode */ +#define TSC_IOCCR_G6_IO3_Pos (22U) +#define TSC_IOCCR_G6_IO3_Msk (0x1UL << TSC_IOCCR_G6_IO3_Pos) /*!< 0x00400000 */ +#define TSC_IOCCR_G6_IO3 TSC_IOCCR_G6_IO3_Msk /*!< GROUP6_IO3 channel mode */ +#define TSC_IOCCR_G6_IO4_Pos (23U) +#define TSC_IOCCR_G6_IO4_Msk (0x1UL << TSC_IOCCR_G6_IO4_Pos) /*!< 0x00800000 */ +#define TSC_IOCCR_G6_IO4 TSC_IOCCR_G6_IO4_Msk /*!< GROUP6_IO4 channel mode */ +#define TSC_IOCCR_G7_IO1_Pos (24U) +#define TSC_IOCCR_G7_IO1_Msk (0x1UL << TSC_IOCCR_G7_IO1_Pos) /*!< 0x01000000 */ +#define TSC_IOCCR_G7_IO1 TSC_IOCCR_G7_IO1_Msk /*!< GROUP7_IO1 channel mode */ +#define TSC_IOCCR_G7_IO2_Pos (25U) +#define TSC_IOCCR_G7_IO2_Msk (0x1UL << TSC_IOCCR_G7_IO2_Pos) /*!< 0x02000000 */ +#define TSC_IOCCR_G7_IO2 TSC_IOCCR_G7_IO2_Msk /*!< GROUP7_IO2 channel mode */ +#define TSC_IOCCR_G7_IO3_Pos (26U) +#define TSC_IOCCR_G7_IO3_Msk (0x1UL << TSC_IOCCR_G7_IO3_Pos) /*!< 0x04000000 */ +#define TSC_IOCCR_G7_IO3 TSC_IOCCR_G7_IO3_Msk /*!< GROUP7_IO3 channel mode */ +#define TSC_IOCCR_G7_IO4_Pos (27U) +#define TSC_IOCCR_G7_IO4_Msk (0x1UL << TSC_IOCCR_G7_IO4_Pos) /*!< 0x08000000 */ +#define TSC_IOCCR_G7_IO4 TSC_IOCCR_G7_IO4_Msk /*!< GROUP7_IO4 channel mode */ + +/******************* Bit definition for TSC_IOGCSR register *****************/ +#define TSC_IOGCSR_G1E_Pos (0U) +#define TSC_IOGCSR_G1E_Msk (0x1UL << TSC_IOGCSR_G1E_Pos) /*!< 0x00000001 */ +#define TSC_IOGCSR_G1E TSC_IOGCSR_G1E_Msk /*!< Analog IO GROUP1 enable */ +#define TSC_IOGCSR_G2E_Pos (1U) +#define TSC_IOGCSR_G2E_Msk (0x1UL << TSC_IOGCSR_G2E_Pos) /*!< 0x00000002 */ +#define TSC_IOGCSR_G2E TSC_IOGCSR_G2E_Msk /*!< Analog IO GROUP2 enable */ +#define TSC_IOGCSR_G3E_Pos (2U) +#define TSC_IOGCSR_G3E_Msk (0x1UL << TSC_IOGCSR_G3E_Pos) /*!< 0x00000004 */ +#define TSC_IOGCSR_G3E TSC_IOGCSR_G3E_Msk /*!< Analog IO GROUP3 enable */ +#define TSC_IOGCSR_G4E_Pos (3U) +#define TSC_IOGCSR_G4E_Msk (0x1UL << TSC_IOGCSR_G4E_Pos) /*!< 0x00000008 */ +#define TSC_IOGCSR_G4E TSC_IOGCSR_G4E_Msk /*!< Analog IO GROUP4 enable */ +#define TSC_IOGCSR_G5E_Pos (4U) +#define TSC_IOGCSR_G5E_Msk (0x1UL << TSC_IOGCSR_G5E_Pos) /*!< 0x00000010 */ +#define TSC_IOGCSR_G5E TSC_IOGCSR_G5E_Msk /*!< Analog IO GROUP5 enable */ +#define TSC_IOGCSR_G6E_Pos (5U) +#define TSC_IOGCSR_G6E_Msk (0x1UL << TSC_IOGCSR_G6E_Pos) /*!< 0x00000020 */ +#define TSC_IOGCSR_G6E TSC_IOGCSR_G6E_Msk /*!< Analog IO GROUP6 enable */ +#define TSC_IOGCSR_G7E_Pos (6U) +#define TSC_IOGCSR_G7E_Msk (0x1UL << TSC_IOGCSR_G7E_Pos) /*!< 0x00000040 */ +#define TSC_IOGCSR_G7E TSC_IOGCSR_G7E_Msk /*!< Analog IO GROUP7 enable */ +#define TSC_IOGCSR_G1S_Pos (16U) +#define TSC_IOGCSR_G1S_Msk (0x1UL << TSC_IOGCSR_G1S_Pos) /*!< 0x00010000 */ +#define TSC_IOGCSR_G1S TSC_IOGCSR_G1S_Msk /*!< Analog IO GROUP1 status */ +#define TSC_IOGCSR_G2S_Pos (17U) +#define TSC_IOGCSR_G2S_Msk (0x1UL << TSC_IOGCSR_G2S_Pos) /*!< 0x00020000 */ +#define TSC_IOGCSR_G2S TSC_IOGCSR_G2S_Msk /*!< Analog IO GROUP2 status */ +#define TSC_IOGCSR_G3S_Pos (18U) +#define TSC_IOGCSR_G3S_Msk (0x1UL << TSC_IOGCSR_G3S_Pos) /*!< 0x00040000 */ +#define TSC_IOGCSR_G3S TSC_IOGCSR_G3S_Msk /*!< Analog IO GROUP3 status */ +#define TSC_IOGCSR_G4S_Pos (19U) +#define TSC_IOGCSR_G4S_Msk (0x1UL << TSC_IOGCSR_G4S_Pos) /*!< 0x00080000 */ +#define TSC_IOGCSR_G4S TSC_IOGCSR_G4S_Msk /*!< Analog IO GROUP4 status */ +#define TSC_IOGCSR_G5S_Pos (20U) +#define TSC_IOGCSR_G5S_Msk (0x1UL << TSC_IOGCSR_G5S_Pos) /*!< 0x00100000 */ +#define TSC_IOGCSR_G5S TSC_IOGCSR_G5S_Msk /*!< Analog IO GROUP5 status */ +#define TSC_IOGCSR_G6S_Pos (21U) +#define TSC_IOGCSR_G6S_Msk (0x1UL << TSC_IOGCSR_G6S_Pos) /*!< 0x00200000 */ +#define TSC_IOGCSR_G6S TSC_IOGCSR_G6S_Msk /*!< Analog IO GROUP6 status */ +#define TSC_IOGCSR_G7S_Pos (22U) +#define TSC_IOGCSR_G7S_Msk (0x1UL << TSC_IOGCSR_G7S_Pos) /*!< 0x00400000 */ +#define TSC_IOGCSR_G7S TSC_IOGCSR_G7S_Msk /*!< Analog IO GROUP7 status */ + +/******************* Bit definition for TSC_IOGXCR register *****************/ +#define TSC_IOGXCR_CNT_Pos (0U) +#define TSC_IOGXCR_CNT_Msk (0x3FFFUL << TSC_IOGXCR_CNT_Pos) /*!< 0x00003FFF */ +#define TSC_IOGXCR_CNT TSC_IOGXCR_CNT_Msk /*!< CNT[13:0] bits (Counter value) */ + +/******************************************************************************/ +/* */ +/* SYSCFG */ +/* */ +/******************************************************************************/ +/***************** Bit definition for SYSCFG_MEMRMP register (SYSCFG memory remap register) ***********************************/ +#define SYSCFG_MEMRMP_MEM_MODE_Pos (0U) +#define SYSCFG_MEMRMP_MEM_MODE_Msk (0x7UL << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000007 */ +#define SYSCFG_MEMRMP_MEM_MODE SYSCFG_MEMRMP_MEM_MODE_Msk /*!< SYSCFG_Memory Remap Config */ +#define SYSCFG_MEMRMP_MEM_MODE_0 (0x1U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000001 */ +#define SYSCFG_MEMRMP_MEM_MODE_1 (0x2U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000002 */ +#define SYSCFG_MEMRMP_MEM_MODE_2 (0x4U << SYSCFG_MEMRMP_MEM_MODE_Pos) /*!< 0x00000004 */ + +/***************** Bit definition for SYSCFG_CFGR1 register (SYSCFG configuration register 1) ****************************************************************/ +#define SYSCFG_CFGR1_BOOSTEN_Pos (8U) +#define SYSCFG_CFGR1_BOOSTEN_Msk (0x1UL << SYSCFG_CFGR1_BOOSTEN_Pos) /*!< 0x00000100 */ +#define SYSCFG_CFGR1_BOOSTEN SYSCFG_CFGR1_BOOSTEN_Msk /*!< I/O analog switch voltage booster enable */ +#define SYSCFG_CFGR1_I2C_PB6_FMP_Pos (16U) +#define SYSCFG_CFGR1_I2C_PB6_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB6_FMP_Pos) /*!< 0x00010000 */ +#define SYSCFG_CFGR1_I2C_PB6_FMP SYSCFG_CFGR1_I2C_PB6_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB6 */ +#define SYSCFG_CFGR1_I2C_PB7_FMP_Pos (17U) +#define SYSCFG_CFGR1_I2C_PB7_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB7_FMP_Pos) /*!< 0x00020000 */ +#define SYSCFG_CFGR1_I2C_PB7_FMP SYSCFG_CFGR1_I2C_PB7_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB7 */ +#define SYSCFG_CFGR1_I2C_PB8_FMP_Pos (18U) +#define SYSCFG_CFGR1_I2C_PB8_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB8_FMP_Pos) /*!< 0x00040000 */ +#define SYSCFG_CFGR1_I2C_PB8_FMP SYSCFG_CFGR1_I2C_PB8_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB8 */ +#define SYSCFG_CFGR1_I2C_PB9_FMP_Pos (19U) +#define SYSCFG_CFGR1_I2C_PB9_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C_PB9_FMP_Pos) /*!< 0x00080000 */ +#define SYSCFG_CFGR1_I2C_PB9_FMP SYSCFG_CFGR1_I2C_PB9_FMP_Msk /*!< Fast-mode Plus (Fm+) driving capability activation on PB9 */ +#define SYSCFG_CFGR1_I2C1_FMP_Pos (20U) +#define SYSCFG_CFGR1_I2C1_FMP_Msk (0x1UL << SYSCFG_CFGR1_I2C1_FMP_Pos) /*!< 0x00100000 */ +#define SYSCFG_CFGR1_I2C1_FMP SYSCFG_CFGR1_I2C1_FMP_Msk /*!< I2C1 Fast-mode Plus (Fm+) driving capability activation */ +#define SYSCFG_CFGR1_FPU_IE_Pos (26U) +#define SYSCFG_CFGR1_FPU_IE_Msk (0x3FUL << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0xFC000000 */ +#define SYSCFG_CFGR1_FPU_IE SYSCFG_CFGR1_FPU_IE_Msk /*!< Cortex M4 Floating Point Unit interrupts enable bits */ +#define SYSCFG_CFGR1_FPU_IE_0 (0x01U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x04000000 */ +#define SYSCFG_CFGR1_FPU_IE_1 (0x02U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x08000000 */ +#define SYSCFG_CFGR1_FPU_IE_2 (0x04U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x10000000 */ +#define SYSCFG_CFGR1_FPU_IE_3 (0x08U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x20000000 */ +#define SYSCFG_CFGR1_FPU_IE_4 (0x10U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x40000000 */ +#define SYSCFG_CFGR1_FPU_IE_5 (0x20U << SYSCFG_CFGR1_FPU_IE_Pos) /*!< 0x80000000 */ + +/***************** Bit definition for SYSCFG_EXTICR1 register (External interrupt configuration register 1) ********************************/ +#define SYSCFG_EXTICR1_EXTI0_Pos (0U) +#define SYSCFG_EXTICR1_EXTI0_Msk (0x7UL << SYSCFG_EXTICR1_EXTI0_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR1_EXTI0 SYSCFG_EXTICR1_EXTI0_Msk /*!< External Interrupt Line 0 configuration */ +#define SYSCFG_EXTICR1_EXTI1_Pos (4U) +#define SYSCFG_EXTICR1_EXTI1_Msk (0x7UL << SYSCFG_EXTICR1_EXTI1_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR1_EXTI1 SYSCFG_EXTICR1_EXTI1_Msk /*!< External Interrupt Line 1 configuration */ +#define SYSCFG_EXTICR1_EXTI2_Pos (8U) +#define SYSCFG_EXTICR1_EXTI2_Msk (0x7UL << SYSCFG_EXTICR1_EXTI2_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR1_EXTI2 SYSCFG_EXTICR1_EXTI2_Msk /*!< External Interrupt Line 2 configuration */ +#define SYSCFG_EXTICR1_EXTI3_Pos (12U) +#define SYSCFG_EXTICR1_EXTI3_Msk (0x7UL << SYSCFG_EXTICR1_EXTI3_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR1_EXTI3 SYSCFG_EXTICR1_EXTI3_Msk /*!< External Interrupt Line 3 configuration */ + +/** + * @brief External Interrupt Line 0 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI0_PA (0x00000000UL) /*!< PA[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PB (0x00000001UL) /*!< PB[0] pin */ + +/** + * @brief External Interrupt Line 1 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI1_PA (0x00000000UL) /*!< PA[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PB (0x00000010UL) /*!< PB[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PC (0x00000020UL) /*!< PC[1] pin */ + +/** + * @brief External Interrupt Line 2 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI2_PA (0x00000000UL) /*!< PA[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PB (0x00000100UL) /*!< PB[2] pin */ + +/** + * @brief External Interrupt Line 3 Source Input configuration + */ +#define SYSCFG_EXTICR1_EXTI3_PA (0x00000000UL) /*!< PA[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PB (0x00001000UL) /*!< PB[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PH (0x00007000UL) /*!< PH[3] pin */ + +/***************** Bit definition for SYSCFG_EXTICR2 register (External interrupt configuration register 2) ********************************/ +#define SYSCFG_EXTICR2_EXTI4_Pos (0U) +#define SYSCFG_EXTICR2_EXTI4_Msk (0x7UL << SYSCFG_EXTICR2_EXTI4_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR2_EXTI4 SYSCFG_EXTICR2_EXTI4_Msk /*!< External Interrupt Line 4 configuration */ +#define SYSCFG_EXTICR2_EXTI5_Pos (4U) +#define SYSCFG_EXTICR2_EXTI5_Msk (0x7UL << SYSCFG_EXTICR2_EXTI5_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR2_EXTI5 SYSCFG_EXTICR2_EXTI5_Msk /*!< External Interrupt Line 5 configuration */ +#define SYSCFG_EXTICR2_EXTI6_Pos (8U) +#define SYSCFG_EXTICR2_EXTI6_Msk (0x7UL << SYSCFG_EXTICR2_EXTI6_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR2_EXTI6 SYSCFG_EXTICR2_EXTI6_Msk /*!< External Interrupt Line 6 configuration */ +#define SYSCFG_EXTICR2_EXTI7_Pos (12U) +#define SYSCFG_EXTICR2_EXTI7_Msk (0x7UL << SYSCFG_EXTICR2_EXTI7_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR2_EXTI7 SYSCFG_EXTICR2_EXTI7_Msk /*!< External Interrupt Line 7 configuration */ + +/** + * @brief External Interrupt Line 4 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI4_PA (0x00000000UL) /*!< PA[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PB (0x00000001UL) /*!< PB[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PE (0x00000004UL) /*!< PE[4] pin */ + +/** + * @brief External Interrupt Line 5 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI5_PA (0x00000000UL) /*!< PA[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PB (0x00000010UL) /*!< PB[5] pin */ + +/** + * @brief External Interrupt Line 6 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI6_PA (0x00000000UL) /*!< PA[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PB (0x00000100UL) /*!< PB[6] pin */ + +/** + * @brief External Interrupt Line 7 Source Input configuration + */ +#define SYSCFG_EXTICR2_EXTI7_PA (0x00000000UL) /*!< PA[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PB (0x00001000UL) /*!< PB[7] pin */ + +/***************** Bit definition for SYSCFG_EXTICR3 register (External interrupt configuration register 3) ********************************/ +#define SYSCFG_EXTICR3_EXTI8_Pos (0U) +#define SYSCFG_EXTICR3_EXTI8_Msk (0x7UL << SYSCFG_EXTICR3_EXTI8_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR3_EXTI8 SYSCFG_EXTICR3_EXTI8_Msk /*!< External Interrupt Line 8 configuration */ +#define SYSCFG_EXTICR3_EXTI9_Pos (4U) +#define SYSCFG_EXTICR3_EXTI9_Msk (0x7UL << SYSCFG_EXTICR3_EXTI9_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR3_EXTI9 SYSCFG_EXTICR3_EXTI9_Msk /*!< External Interrupt Line 9 configuration */ +#define SYSCFG_EXTICR3_EXTI10_Pos (8U) +#define SYSCFG_EXTICR3_EXTI10_Msk (0x7UL << SYSCFG_EXTICR3_EXTI10_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR3_EXTI10 SYSCFG_EXTICR3_EXTI10_Msk /*!< External Interrupt Line 10 configuration */ +#define SYSCFG_EXTICR3_EXTI11_Pos (12U) +#define SYSCFG_EXTICR3_EXTI11_Msk (0xFUL << SYSCFG_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ +#define SYSCFG_EXTICR3_EXTI11 SYSCFG_EXTICR3_EXTI11_Msk /*!< External Interrupt Line 11 configuration */ + +/** + * @brief External Interrupt Line 8 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI8_PA (0x00000000UL) /*!< PA[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PB (0x00000001UL) /*!< PB[8] pin */ + +/** + * @brief External Interrupt Line 9 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI9_PA (0x00000000UL) /*!< PA[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PB (0x00000010UL) /*!< PB[9] pin */ + +/** + * @brief External Interrupt Line 10 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI10_PA (0x00000000UL) /*!< PA[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PB (0x00000100UL) /*!< PB[10] pin */ + +/** + * @brief External Interrupt Line 11 Source Input configuration + */ +#define SYSCFG_EXTICR3_EXTI11_PA (0x00000000UL) /*!< PA[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PB (0x00001000UL) /*!< PB[11] pin */ + +/***************** Bit definition for SYSCFG_EXTICR4 register (External interrupt configuration register 4) *********************************/ +#define SYSCFG_EXTICR4_EXTI12_Pos (0U) +#define SYSCFG_EXTICR4_EXTI12_Msk (0x7UL << SYSCFG_EXTICR4_EXTI12_Pos) /*!< 0x00000007 */ +#define SYSCFG_EXTICR4_EXTI12 SYSCFG_EXTICR4_EXTI12_Msk /*!< External Interrupt Line 12 configuration */ +#define SYSCFG_EXTICR4_EXTI13_Pos (4U) +#define SYSCFG_EXTICR4_EXTI13_Msk (0x7UL << SYSCFG_EXTICR4_EXTI13_Pos) /*!< 0x00000070 */ +#define SYSCFG_EXTICR4_EXTI13 SYSCFG_EXTICR4_EXTI13_Msk /*!< External Interrupt Line 13 configuration */ +#define SYSCFG_EXTICR4_EXTI14_Pos (8U) +#define SYSCFG_EXTICR4_EXTI14_Msk (0x7UL << SYSCFG_EXTICR4_EXTI14_Pos) /*!< 0x00000700 */ +#define SYSCFG_EXTICR4_EXTI14 SYSCFG_EXTICR4_EXTI14_Msk /*!< External Interrupt Line 14 configuration */ +#define SYSCFG_EXTICR4_EXTI15_Pos (12U) +#define SYSCFG_EXTICR4_EXTI15_Msk (0x7UL << SYSCFG_EXTICR4_EXTI15_Pos) /*!< 0x00007000 */ +#define SYSCFG_EXTICR4_EXTI15 SYSCFG_EXTICR4_EXTI15_Msk /*!< External Interrupt Line 15 configuration */ + +/** + * @brief External Interrupt Line 12 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI12_PA (0x00000000UL) /*!< PA[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PB (0x00000001UL) /*!< PB[12] pin */ + +/** + * @brief External Interrupt Line 13 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI13_PA (0x00000000UL) /*!< PA[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PB (0x00000010UL) /*!< PB[13] pin */ + +/** + * @brief External Interrupt Line 14 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI14_PA (0x00000000UL) /*!< PA[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PB (0x00000100UL) /*!< PB[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PC (0x00000200UL) /*!< PC[14] pin */ + +/** + * @brief External Interrupt Line 15 Source Input configuration + */ +#define SYSCFG_EXTICR4_EXTI15_PA (0x00000000UL) /*!< PA[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PB (0x00001000UL) /*!< PB[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PC (0x00002000UL) /*!< PC[15] pin */ + +/***************** Bit definition for SYSCFG_SCSR register (SYSCFG SRAM2 control and status register) *********************************************************/ +#define SYSCFG_SCSR_SRAM2ER_Pos (0U) +#define SYSCFG_SCSR_SRAM2ER_Msk (0x1UL << SYSCFG_SCSR_SRAM2ER_Pos) /*!< 0x00000001 */ +#define SYSCFG_SCSR_SRAM2ER SYSCFG_SCSR_SRAM2ER_Msk /*!< SRAM2 and PKA RAM Erase */ +#define SYSCFG_SCSR_SRAM2BSY_Pos (1U) +#define SYSCFG_SCSR_SRAM2BSY_Msk (0x1UL << SYSCFG_SCSR_SRAM2BSY_Pos) /*!< 0x00000002 */ +#define SYSCFG_SCSR_SRAM2BSY SYSCFG_SCSR_SRAM2BSY_Msk /*!< SRAM2 and PKA RAM busy by erase operation */ +#define SYSCFG_SCSR_C2RFD_Pos (31U) +#define SYSCFG_SCSR_C2RFD_Msk (0x1UL << SYSCFG_SCSR_C2RFD_Pos) /*!< 0x80000000 */ +#define SYSCFG_SCSR_C2RFD SYSCFG_SCSR_C2RFD_Msk /*!< CPU2 SRAM fetch (execution) disable */ + +/***************** Bit definition for SYSCFG_CFGR2 register (SYSCFG configuration register 2) *****************************************************************/ +#define SYSCFG_CFGR2_CLL_Pos (0U) +#define SYSCFG_CFGR2_CLL_Msk (0x1UL << SYSCFG_CFGR2_CLL_Pos) /*!< 0x00000001 */ +#define SYSCFG_CFGR2_CLL SYSCFG_CFGR2_CLL_Msk /*!< Cortex M4 LOCKUP (hardfault) output enable */ +#define SYSCFG_CFGR2_SPL_Pos (1U) +#define SYSCFG_CFGR2_SPL_Msk (0x1UL << SYSCFG_CFGR2_SPL_Pos) /*!< 0x00000002 */ +#define SYSCFG_CFGR2_SPL SYSCFG_CFGR2_SPL_Msk /*!< SRAM2 Parity Lock */ +#define SYSCFG_CFGR2_PVDL_Pos (2U) +#define SYSCFG_CFGR2_PVDL_Msk (0x1UL << SYSCFG_CFGR2_PVDL_Pos) /*!< 0x00000004 */ +#define SYSCFG_CFGR2_PVDL SYSCFG_CFGR2_PVDL_Msk /*!< PVD Lock */ +#define SYSCFG_CFGR2_ECCL_Pos (3U) +#define SYSCFG_CFGR2_ECCL_Msk (0x1UL << SYSCFG_CFGR2_ECCL_Pos) /*!< 0x00000008 */ +#define SYSCFG_CFGR2_ECCL SYSCFG_CFGR2_ECCL_Msk /*!< ECC Lock */ +#define SYSCFG_CFGR2_SPF_Pos (8U) +#define SYSCFG_CFGR2_SPF_Msk (0x1UL << SYSCFG_CFGR2_SPF_Pos) /*!< 0x00000100 */ +#define SYSCFG_CFGR2_SPF SYSCFG_CFGR2_SPF_Msk /*!< SRAM2 Parity Lock */ + +/***************** Bit definition for SYSCFG_SWPR1 register (SYSCFG SRAM2A write protection register) *********************************************************/ +#define SYSCFG_SWPR1_PAGE0_Pos (0U) +#define SYSCFG_SWPR1_PAGE0_Msk (0x1UL << SYSCFG_SWPR1_PAGE0_Pos) /*!< 0x00000001 */ +#define SYSCFG_SWPR1_PAGE0 SYSCFG_SWPR1_PAGE0_Msk /*!< SRAM2A Write protection page 0 (0x20030000 � 0x200303FF) */ +#define SYSCFG_SWPR1_PAGE1_Pos (1U) +#define SYSCFG_SWPR1_PAGE1_Msk (0x1UL << SYSCFG_SWPR1_PAGE1_Pos) /*!< 0x00000002 */ +#define SYSCFG_SWPR1_PAGE1 SYSCFG_SWPR1_PAGE1_Msk /*!< SRAM2A Write protection page 1 (0x20030400 � 0x200307FF) */ +#define SYSCFG_SWPR1_PAGE2_Pos (2U) +#define SYSCFG_SWPR1_PAGE2_Msk (0x1UL << SYSCFG_SWPR1_PAGE2_Pos) /*!< 0x00000004 */ +#define SYSCFG_SWPR1_PAGE2 SYSCFG_SWPR1_PAGE2_Msk /*!< SRAM2A Write protection page 2 (0x20030800 � 0x20030BFF) */ +#define SYSCFG_SWPR1_PAGE3_Pos (3U) +#define SYSCFG_SWPR1_PAGE3_Msk (0x1UL << SYSCFG_SWPR1_PAGE3_Pos) /*!< 0x00000008 */ +#define SYSCFG_SWPR1_PAGE3 SYSCFG_SWPR1_PAGE3_Msk /*!< SRAM2A Write protection page 3 (0x20030C00 � 0x20030FFF) */ +#define SYSCFG_SWPR1_PAGE4_Pos (4U) +#define SYSCFG_SWPR1_PAGE4_Msk (0x1UL << SYSCFG_SWPR1_PAGE4_Pos) /*!< 0x00000010 */ +#define SYSCFG_SWPR1_PAGE4 SYSCFG_SWPR1_PAGE4_Msk /*!< SRAM2A Write protection page 4 (0x20031000 � 0x200313FF) */ +#define SYSCFG_SWPR1_PAGE5_Pos (5U) +#define SYSCFG_SWPR1_PAGE5_Msk (0x1UL << SYSCFG_SWPR1_PAGE5_Pos) /*!< 0x00000020 */ +#define SYSCFG_SWPR1_PAGE5 SYSCFG_SWPR1_PAGE5_Msk /*!< SRAM2A Write protection page 5 (0x20031400 � 0x200317FF) */ +#define SYSCFG_SWPR1_PAGE6_Pos (6U) +#define SYSCFG_SWPR1_PAGE6_Msk (0x1UL << SYSCFG_SWPR1_PAGE6_Pos) /*!< 0x00000040 */ +#define SYSCFG_SWPR1_PAGE6 SYSCFG_SWPR1_PAGE6_Msk /*!< SRAM2A Write protection page 6 (0x20031800 � 0x20031BFF) */ +#define SYSCFG_SWPR1_PAGE7_Pos (7U) +#define SYSCFG_SWPR1_PAGE7_Msk (0x1UL << SYSCFG_SWPR1_PAGE7_Pos) /*!< 0x00000080 */ +#define SYSCFG_SWPR1_PAGE7 SYSCFG_SWPR1_PAGE7_Msk /*!< SRAM2A Write protection page 7 (0x20031C00 � 0x20031FFF) */ +#define SYSCFG_SWPR1_PAGE8_Pos (8U) +#define SYSCFG_SWPR1_PAGE8_Msk (0x1UL << SYSCFG_SWPR1_PAGE8_Pos) /*!< 0x00000100 */ +#define SYSCFG_SWPR1_PAGE8 SYSCFG_SWPR1_PAGE8_Msk /*!< SRAM2A Write protection page 8 (0x20032000 � 0x200323FF) */ +#define SYSCFG_SWPR1_PAGE9_Pos (9U) +#define SYSCFG_SWPR1_PAGE9_Msk (0x1UL << SYSCFG_SWPR1_PAGE9_Pos) /*!< 0x00000200 */ +#define SYSCFG_SWPR1_PAGE9 SYSCFG_SWPR1_PAGE9_Msk /*!< SRAM2A Write protection page 9 (0x20032400 � 0x200327FF) */ +#define SYSCFG_SWPR1_PAGE10_Pos (10U) +#define SYSCFG_SWPR1_PAGE10_Msk (0x1UL << SYSCFG_SWPR1_PAGE10_Pos) /*!< 0x00000400 */ +#define SYSCFG_SWPR1_PAGE10 SYSCFG_SWPR1_PAGE10_Msk /*!< SRAM2A Write protection page 10 (0x20032800 � 0x20032BFF) */ +#define SYSCFG_SWPR1_PAGE11_Pos (11U) +#define SYSCFG_SWPR1_PAGE11_Msk (0x1UL << SYSCFG_SWPR1_PAGE11_Pos) /*!< 0x00000800 */ +#define SYSCFG_SWPR1_PAGE11 SYSCFG_SWPR1_PAGE11_Msk /*!< SRAM2A Write protection page 11 (0x20032C00 � 0x20032FFF) */ +#define SYSCFG_SWPR1_PAGE12_Pos (12U) +#define SYSCFG_SWPR1_PAGE12_Msk (0x1UL << SYSCFG_SWPR1_PAGE12_Pos) /*!< 0x00001000 */ +#define SYSCFG_SWPR1_PAGE12 SYSCFG_SWPR1_PAGE12_Msk /*!< SRAM2A Write protection page 12 (0x20033000 � 0x200333FF) */ +#define SYSCFG_SWPR1_PAGE13_Pos (13U) +#define SYSCFG_SWPR1_PAGE13_Msk (0x1UL << SYSCFG_SWPR1_PAGE13_Pos) /*!< 0x00002000 */ +#define SYSCFG_SWPR1_PAGE13 SYSCFG_SWPR1_PAGE13_Msk /*!< SRAM2A Write protection page 13 (0x20033400 � 0x200337FF) */ +#define SYSCFG_SWPR1_PAGE14_Pos (14U) +#define SYSCFG_SWPR1_PAGE14_Msk (0x1UL << SYSCFG_SWPR1_PAGE14_Pos) /*!< 0x00004000 */ +#define SYSCFG_SWPR1_PAGE14 SYSCFG_SWPR1_PAGE14_Msk /*!< SRAM2A Write protection page 14 (0x20033800 � 0x20033BFF) */ +#define SYSCFG_SWPR1_PAGE15_Pos (15U) +#define SYSCFG_SWPR1_PAGE15_Msk (0x1UL << SYSCFG_SWPR1_PAGE15_Pos) /*!< 0x00008000 */ +#define SYSCFG_SWPR1_PAGE15 SYSCFG_SWPR1_PAGE15_Msk /*!< SRAM2A Write protection page 15 (0x20033C00 � 0x20033FFF) */ +#define SYSCFG_SWPR1_PAGE16_Pos (16U) +#define SYSCFG_SWPR1_PAGE16_Msk (0x1UL << SYSCFG_SWPR1_PAGE16_Pos) /*!< 0x00010000 */ +#define SYSCFG_SWPR1_PAGE16 SYSCFG_SWPR1_PAGE16_Msk /*!< SRAM2A Write protection page 16 (0x20034000 � 0x200343FF) */ +#define SYSCFG_SWPR1_PAGE17_Pos (17U) +#define SYSCFG_SWPR1_PAGE17_Msk (0x1UL << SYSCFG_SWPR1_PAGE17_Pos) /*!< 0x00020000 */ +#define SYSCFG_SWPR1_PAGE17 SYSCFG_SWPR1_PAGE17_Msk /*!< SRAM2A Write protection page 17 (0x20034400 � 0x200347FF) */ +#define SYSCFG_SWPR1_PAGE18_Pos (18U) +#define SYSCFG_SWPR1_PAGE18_Msk (0x1UL << SYSCFG_SWPR1_PAGE18_Pos) /*!< 0x00040000 */ +#define SYSCFG_SWPR1_PAGE18 SYSCFG_SWPR1_PAGE18_Msk /*!< SRAM2A Write protection page 18 (0x20034800 � 0x20034BFF) */ +#define SYSCFG_SWPR1_PAGE19_Pos (19U) +#define SYSCFG_SWPR1_PAGE19_Msk (0x1UL << SYSCFG_SWPR1_PAGE19_Pos) /*!< 0x00080000 */ +#define SYSCFG_SWPR1_PAGE19 SYSCFG_SWPR1_PAGE19_Msk /*!< SRAM2A Write protection page 19 (0x20034C00 � 0x20034FFF) */ +#define SYSCFG_SWPR1_PAGE20_Pos (20U) +#define SYSCFG_SWPR1_PAGE20_Msk (0x1UL << SYSCFG_SWPR1_PAGE20_Pos) /*!< 0x00100000 */ +#define SYSCFG_SWPR1_PAGE20 SYSCFG_SWPR1_PAGE20_Msk /*!< SRAM2A Write protection page 20 (0x20035000 � 0x200353FF) */ +#define SYSCFG_SWPR1_PAGE21_Pos (21U) +#define SYSCFG_SWPR1_PAGE21_Msk (0x1UL << SYSCFG_SWPR1_PAGE21_Pos) /*!< 0x00200000 */ +#define SYSCFG_SWPR1_PAGE21 SYSCFG_SWPR1_PAGE21_Msk /*!< SRAM2A Write protection page 21 (0x20035400 � 0x200357FF) */ +#define SYSCFG_SWPR1_PAGE22_Pos (22U) +#define SYSCFG_SWPR1_PAGE22_Msk (0x1UL << SYSCFG_SWPR1_PAGE22_Pos) /*!< 0x00400000 */ +#define SYSCFG_SWPR1_PAGE22 SYSCFG_SWPR1_PAGE22_Msk /*!< SRAM2A Write protection page 22 (0x20035800 � 0x20035BFF) */ +#define SYSCFG_SWPR1_PAGE23_Pos (23U) +#define SYSCFG_SWPR1_PAGE23_Msk (0x1UL << SYSCFG_SWPR1_PAGE23_Pos) /*!< 0x00800000 */ +#define SYSCFG_SWPR1_PAGE23 SYSCFG_SWPR1_PAGE23_Msk /*!< SRAM2A Write protection page 23 (0x20035C00 � 0x20035FFF) */ +#define SYSCFG_SWPR1_PAGE24_Pos (24U) +#define SYSCFG_SWPR1_PAGE24_Msk (0x1UL << SYSCFG_SWPR1_PAGE24_Pos) /*!< 0x01000000 */ +#define SYSCFG_SWPR1_PAGE24 SYSCFG_SWPR1_PAGE24_Msk /*!< SRAM2A Write protection page 24 (0x20036000 � 0x200363FF) */ +#define SYSCFG_SWPR1_PAGE25_Pos (25U) +#define SYSCFG_SWPR1_PAGE25_Msk (0x1UL << SYSCFG_SWPR1_PAGE25_Pos) /*!< 0x02000000 */ +#define SYSCFG_SWPR1_PAGE25 SYSCFG_SWPR1_PAGE25_Msk /*!< SRAM2A Write protection page 25 (0x20036400 � 0x200367FF) */ +#define SYSCFG_SWPR1_PAGE26_Pos (26U) +#define SYSCFG_SWPR1_PAGE26_Msk (0x1UL << SYSCFG_SWPR1_PAGE26_Pos) /*!< 0x04000000 */ +#define SYSCFG_SWPR1_PAGE26 SYSCFG_SWPR1_PAGE26_Msk /*!< SRAM2A Write protection page 26 (0x20036800 � 0x20036BFF) */ +#define SYSCFG_SWPR1_PAGE27_Pos (27U) +#define SYSCFG_SWPR1_PAGE27_Msk (0x1UL << SYSCFG_SWPR1_PAGE27_Pos) /*!< 0x08000000 */ +#define SYSCFG_SWPR1_PAGE27 SYSCFG_SWPR1_PAGE27_Msk /*!< SRAM2A Write protection page 27 (0x20036C00 � 0x20036FFF) */ +#define SYSCFG_SWPR1_PAGE28_Pos (28U) +#define SYSCFG_SWPR1_PAGE28_Msk (0x1UL << SYSCFG_SWPR1_PAGE28_Pos) /*!< 0x10000000 */ +#define SYSCFG_SWPR1_PAGE28 SYSCFG_SWPR1_PAGE28_Msk /*!< SRAM2A Write protection page 28 (0x20037000 � 0x200373FF) */ +#define SYSCFG_SWPR1_PAGE29_Pos (29U) +#define SYSCFG_SWPR1_PAGE29_Msk (0x1UL << SYSCFG_SWPR1_PAGE29_Pos) /*!< 0x20000000 */ +#define SYSCFG_SWPR1_PAGE29 SYSCFG_SWPR1_PAGE29_Msk /*!< SRAM2A Write protection page 29 (0x20037400 � 0x200377FF) */ +#define SYSCFG_SWPR1_PAGE30_Pos (30U) +#define SYSCFG_SWPR1_PAGE30_Msk (0x1UL << SYSCFG_SWPR1_PAGE30_Pos) /*!< 0x40000000 */ +#define SYSCFG_SWPR1_PAGE30 SYSCFG_SWPR1_PAGE30_Msk /*!< SRAM2A Write protection page 30 (0x20037800 � 0x20037BFF) */ +#define SYSCFG_SWPR1_PAGE31_Pos (31U) +#define SYSCFG_SWPR1_PAGE31_Msk (0x1UL << SYSCFG_SWPR1_PAGE31_Pos) /*!< 0x80000000 */ +#define SYSCFG_SWPR1_PAGE31 SYSCFG_SWPR1_PAGE31_Msk /*!< SRAM2A Write protection page 31 (0x20037C00 � 0x20037FFF) */ + +/***************** Bit definition for SYSCFG_SKR register (SYSCFG SRAM2 key register) *************************************************************************/ +#define SYSCFG_SKR_KEY_Pos (0U) +#define SYSCFG_SKR_KEY_Msk (0xFFUL << SYSCFG_SKR_KEY_Pos) /*!< 0x000000FF */ +#define SYSCFG_SKR_KEY SYSCFG_SKR_KEY_Msk /*!< SRAM2 write protection key for software erase */ + +/***************** Bit definition for SYSCFG_SWPR2 register (SYSCFG SRAM2 write protection register) **********************************************************/ +#define SYSCFG_SWPR2_PAGE32_Pos (0U) +#define SYSCFG_SWPR2_PAGE32_Msk (0x1UL << SYSCFG_SWPR2_PAGE32_Pos) /*!< 0x00000001 */ +#define SYSCFG_SWPR2_PAGE32 SYSCFG_SWPR2_PAGE32_Msk /*!< SRAM2B Write protection page 0 (0x20038000 � 0x200383FF) */ +#define SYSCFG_SWPR2_PAGE33_Pos (1U) +#define SYSCFG_SWPR2_PAGE33_Msk (0x1UL << SYSCFG_SWPR2_PAGE33_Pos) /*!< 0x00000002 */ +#define SYSCFG_SWPR2_PAGE33 SYSCFG_SWPR2_PAGE33_Msk /*!< SRAM2B Write protection page 1 (0x20038400 � 0x200387FF) */ +#define SYSCFG_SWPR2_PAGE34_Pos (2U) +#define SYSCFG_SWPR2_PAGE34_Msk (0x1UL << SYSCFG_SWPR2_PAGE34_Pos) /*!< 0x00000004 */ +#define SYSCFG_SWPR2_PAGE34 SYSCFG_SWPR2_PAGE34_Msk /*!< SRAM2B Write protection page 2 (0x20038800 � 0x20038bFF) */ +#define SYSCFG_SWPR2_PAGE35_Pos (3U) +#define SYSCFG_SWPR2_PAGE35_Msk (0x1UL << SYSCFG_SWPR2_PAGE35_Pos) /*!< 0x00000008 */ +#define SYSCFG_SWPR2_PAGE35 SYSCFG_SWPR2_PAGE35_Msk /*!< SRAM2B Write protection page 3 (0x20038C00 � 0x20038FFF) */ + +/***************** Bit definition for SYSCFG_IMR1 register (Interrupt masks control and status register on CPU1 - part 1) *******************************************/ +#define SYSCFG_IMR1_TIM1IM_Pos (13U) +#define SYSCFG_IMR1_TIM1IM_Msk (0x1UL << SYSCFG_IMR1_TIM1IM_Pos) /*!< 0x00002000 */ +#define SYSCFG_IMR1_TIM1IM SYSCFG_IMR1_TIM1IM_Msk /*!< Enabling of interrupt from Timer 1 to CPU1 */ +#define SYSCFG_IMR1_EXTI5IM_Pos (21U) +#define SYSCFG_IMR1_EXTI5IM_Msk (0x1UL << SYSCFG_IMR1_EXTI5IM_Pos) /*!< 0x00200000 */ +#define SYSCFG_IMR1_EXTI5IM SYSCFG_IMR1_EXTI5IM_Msk /*!< Enabling of interrupt from External Interrupt Line 5 to CPU1 */ +#define SYSCFG_IMR1_EXTI6IM_Pos (22U) +#define SYSCFG_IMR1_EXTI6IM_Msk (0x1UL << SYSCFG_IMR1_EXTI6IM_Pos) /*!< 0x00400000 */ +#define SYSCFG_IMR1_EXTI6IM SYSCFG_IMR1_EXTI6IM_Msk /*!< Enabling of interrupt from External Interrupt Line 6 to CPU1 */ +#define SYSCFG_IMR1_EXTI7IM_Pos (23U) +#define SYSCFG_IMR1_EXTI7IM_Msk (0x1UL << SYSCFG_IMR1_EXTI7IM_Pos) /*!< 0x00800000 */ +#define SYSCFG_IMR1_EXTI7IM SYSCFG_IMR1_EXTI7IM_Msk /*!< Enabling of interrupt from External Interrupt Line 7 to CPU1 */ +#define SYSCFG_IMR1_EXTI8IM_Pos (24U) +#define SYSCFG_IMR1_EXTI8IM_Msk (0x1UL << SYSCFG_IMR1_EXTI8IM_Pos) /*!< 0x01000000 */ +#define SYSCFG_IMR1_EXTI8IM SYSCFG_IMR1_EXTI8IM_Msk /*!< Enabling of interrupt from External Interrupt Line 8 to CPU1 */ +#define SYSCFG_IMR1_EXTI9IM_Pos (25U) +#define SYSCFG_IMR1_EXTI9IM_Msk (0x1UL << SYSCFG_IMR1_EXTI9IM_Pos) /*!< 0x02000000 */ +#define SYSCFG_IMR1_EXTI9IM SYSCFG_IMR1_EXTI9IM_Msk /*!< Enabling of interrupt from External Interrupt Line 9 to CPU1 */ +#define SYSCFG_IMR1_EXTI10IM_Pos (26U) +#define SYSCFG_IMR1_EXTI10IM_Msk (0x1UL << SYSCFG_IMR1_EXTI10IM_Pos) /*!< 0x04000000 */ +#define SYSCFG_IMR1_EXTI10IM SYSCFG_IMR1_EXTI10IM_Msk /*!< Enabling of interrupt from External Interrupt Line 10 to CPU1 */ +#define SYSCFG_IMR1_EXTI11IM_Pos (27U) +#define SYSCFG_IMR1_EXTI11IM_Msk (0x1UL << SYSCFG_IMR1_EXTI11IM_Pos) /*!< 0x08000000 */ +#define SYSCFG_IMR1_EXTI11IM SYSCFG_IMR1_EXTI11IM_Msk /*!< Enabling of interrupt from External Interrupt Line 11 to CPU1 */ +#define SYSCFG_IMR1_EXTI12IM_Pos (28U) +#define SYSCFG_IMR1_EXTI12IM_Msk (0x1UL << SYSCFG_IMR1_EXTI12IM_Pos) /*!< 0x10000000 */ +#define SYSCFG_IMR1_EXTI12IM SYSCFG_IMR1_EXTI12IM_Msk /*!< Enabling of interrupt from External Interrupt Line 12 to CPU1 */ +#define SYSCFG_IMR1_EXTI13IM_Pos (29U) +#define SYSCFG_IMR1_EXTI13IM_Msk (0x1UL << SYSCFG_IMR1_EXTI13IM_Pos) /*!< 0x20000000 */ +#define SYSCFG_IMR1_EXTI13IM SYSCFG_IMR1_EXTI13IM_Msk /*!< Enabling of interrupt from External Interrupt Line 13 to CPU1 */ +#define SYSCFG_IMR1_EXTI14IM_Pos (30U) +#define SYSCFG_IMR1_EXTI14IM_Msk (0x1UL << SYSCFG_IMR1_EXTI14IM_Pos) /*!< 0x40000000 */ +#define SYSCFG_IMR1_EXTI14IM SYSCFG_IMR1_EXTI14IM_Msk /*!< Enabling of interrupt from External Interrupt Line 14 to CPU1 */ +#define SYSCFG_IMR1_EXTI15IM_Pos (31U) +#define SYSCFG_IMR1_EXTI15IM_Msk (0x1UL << SYSCFG_IMR1_EXTI15IM_Pos) /*!< 0x80000000 */ +#define SYSCFG_IMR1_EXTI15IM SYSCFG_IMR1_EXTI15IM_Msk /*!< Enabling of interrupt from External Interrupt Line 15 to CPU1 */ + +/***************** Bit definition for SYSCFG_IMR2 register (Interrupt masks control and status register on CPU1 - part 2) *******************************************/ +#define SYSCFG_IMR2_PVM3IM_Pos (18U) +#define SYSCFG_IMR2_PVM3IM_Msk (0x1UL << SYSCFG_IMR2_PVM3IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_IMR2_PVM3IM SYSCFG_IMR2_PVM3IM_Msk /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU1 */ +#define SYSCFG_IMR2_PVDIM_Pos (20U) +#define SYSCFG_IMR2_PVDIM_Msk (0x1UL << SYSCFG_IMR2_PVDIM_Pos) /*!< 0x00100000 */ +#define SYSCFG_IMR2_PVDIM SYSCFG_IMR2_PVDIM_Msk /*!< Enabling of interrupt from Power Voltage Detector to CPU1 */ + +/***************** Bit definition for SYSCFG_C2IMR1 register (Interrupt masks control and status register on CPU2 - part 1) *******************************************/ +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Pos (0U) +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Pos) /*!< 0x00000001 */ +#define SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM SYSCFG_C2IMR1_RTCSTAMPTAMPLSECSSIM_Msk /* !< Enabling of interrupt from RTC TimeStamp, RTC Tampers + and LSE Clock Security System to CPU2 */ +#define SYSCFG_C2IMR1_RTCWKUPIM_Pos (3U) +#define SYSCFG_C2IMR1_RTCWKUPIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCWKUPIM_Pos) /*!< 0x00000008 */ +#define SYSCFG_C2IMR1_RTCWKUPIM SYSCFG_C2IMR1_RTCWKUPIM_Msk /*!< Enabling of interrupt from RTC Wakeup to CPU2 */ +#define SYSCFG_C2IMR1_RTCALARMIM_Pos (4U) +#define SYSCFG_C2IMR1_RTCALARMIM_Msk (0x1UL << SYSCFG_C2IMR1_RTCALARMIM_Pos) /*!< 0x00000010 */ +#define SYSCFG_C2IMR1_RTCALARMIM SYSCFG_C2IMR1_RTCALARMIM_Msk /*!< Enabling of interrupt from RTC Alarms to CPU2 */ +#define SYSCFG_C2IMR1_RCCIM_Pos (5U) +#define SYSCFG_C2IMR1_RCCIM_Msk (0x1UL << SYSCFG_C2IMR1_RCCIM_Pos) /*!< 0x00000020 */ +#define SYSCFG_C2IMR1_RCCIM SYSCFG_C2IMR1_RCCIM_Msk /*!< Enabling of interrupt from RCC to CPU2 */ +#define SYSCFG_C2IMR1_FLASHIM_Pos (6U) +#define SYSCFG_C2IMR1_FLASHIM_Msk (0x1UL << SYSCFG_C2IMR1_FLASHIM_Pos) /*!< 0x00000040 */ +#define SYSCFG_C2IMR1_FLASHIM SYSCFG_C2IMR1_FLASHIM_Msk /*!< Enabling of interrupt from FLASH to CPU2 */ +#define SYSCFG_C2IMR1_PKAIM_Pos (8U) +#define SYSCFG_C2IMR1_PKAIM_Msk (0x1UL << SYSCFG_C2IMR1_PKAIM_Pos) /*!< 0x00000100 */ +#define SYSCFG_C2IMR1_PKAIM SYSCFG_C2IMR1_PKAIM_Msk /*!< Enabling of interrupt from Public Key Accelerator to CPU2 */ +#define SYSCFG_C2IMR1_RNGIM_Pos (9U) +#define SYSCFG_C2IMR1_RNGIM_Msk (0x1UL << SYSCFG_C2IMR1_RNGIM_Pos) /*!< 0x00000200 */ +#define SYSCFG_C2IMR1_RNGIM SYSCFG_C2IMR1_RNGIM_Msk /*!< Enabling of interrupt from Random Number Generator to CPU2 */ +#define SYSCFG_C2IMR1_COMPIM_Pos (11U) +#define SYSCFG_C2IMR1_COMPIM_Msk (0x1UL << SYSCFG_C2IMR1_COMPIM_Pos) /*!< 0x00000800 */ +#define SYSCFG_C2IMR1_COMPIM SYSCFG_C2IMR1_COMPIM_Msk /*!< Enabling of interrupt from Comparator to CPU2 */ +#define SYSCFG_C2IMR1_ADCIM_Pos (12U) +#define SYSCFG_C2IMR1_ADCIM_Msk (0x1UL << SYSCFG_C2IMR1_ADCIM_Pos) /*!< 0x00001000 */ +#define SYSCFG_C2IMR1_ADCIM SYSCFG_C2IMR1_ADCIM_Msk /*!< Enabling of interrupt from Analog Digital Converter to CPU2 */ +#define SYSCFG_C2IMR1_EXTI0IM_Pos (16U) +#define SYSCFG_C2IMR1_EXTI0IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI0IM_Pos) /*!< 0x00010000 */ +#define SYSCFG_C2IMR1_EXTI0IM SYSCFG_C2IMR1_EXTI0IM_Msk /*!< Enabling of interrupt from External Interrupt Line 0 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI1IM_Pos (17U) +#define SYSCFG_C2IMR1_EXTI1IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI1IM_Pos) /*!< 0x00020000 */ +#define SYSCFG_C2IMR1_EXTI1IM SYSCFG_C2IMR1_EXTI1IM_Msk /*!< Enabling of interrupt from External Interrupt Line 1 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI2IM_Pos (18U) +#define SYSCFG_C2IMR1_EXTI2IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI2IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_C2IMR1_EXTI2IM SYSCFG_C2IMR1_EXTI2IM_Msk /*!< Enabling of interrupt from External Interrupt Line 2 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI3IM_Pos (19U) +#define SYSCFG_C2IMR1_EXTI3IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI3IM_Pos) /*!< 0x00080000 */ +#define SYSCFG_C2IMR1_EXTI3IM SYSCFG_C2IMR1_EXTI3IM_Msk /*!< Enabling of interrupt from External Interrupt Line 3 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI4IM_Pos (20U) +#define SYSCFG_C2IMR1_EXTI4IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI4IM_Pos) /*!< 0x00100000 */ +#define SYSCFG_C2IMR1_EXTI4IM SYSCFG_C2IMR1_EXTI4IM_Msk /*!< Enabling of interrupt from External Interrupt Line 4 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI5IM_Pos (21U) +#define SYSCFG_C2IMR1_EXTI5IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI5IM_Pos) /*!< 0x00200000 */ +#define SYSCFG_C2IMR1_EXTI5IM SYSCFG_C2IMR1_EXTI5IM_Msk /*!< Enabling of interrupt from External Interrupt Line 5 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI6IM_Pos (22U) +#define SYSCFG_C2IMR1_EXTI6IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI6IM_Pos) /*!< 0x00400000 */ +#define SYSCFG_C2IMR1_EXTI6IM SYSCFG_C2IMR1_EXTI6IM_Msk /*!< Enabling of interrupt from External Interrupt Line 6 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI7IM_Pos (23U) +#define SYSCFG_C2IMR1_EXTI7IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI7IM_Pos) /*!< 0x00800000 */ +#define SYSCFG_C2IMR1_EXTI7IM SYSCFG_C2IMR1_EXTI7IM_Msk /*!< Enabling of interrupt from External Interrupt Line 7 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI8IM_Pos (24U) +#define SYSCFG_C2IMR1_EXTI8IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI8IM_Pos) /*!< 0x01000000 */ +#define SYSCFG_C2IMR1_EXTI8IM SYSCFG_C2IMR1_EXTI8IM_Msk /*!< Enabling of interrupt from External Interrupt Line 8 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI9IM_Pos (25U) +#define SYSCFG_C2IMR1_EXTI9IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI9IM_Pos) /*!< 0x02000000 */ +#define SYSCFG_C2IMR1_EXTI9IM SYSCFG_C2IMR1_EXTI9IM_Msk /*!< Enabling of interrupt from External Interrupt Line 9 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI10IM_Pos (26U) +#define SYSCFG_C2IMR1_EXTI10IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI10IM_Pos) /*!< 0x04000000 */ +#define SYSCFG_C2IMR1_EXTI10IM SYSCFG_C2IMR1_EXTI10IM_Msk /*!< Enabling of interrupt from External Interrupt Line 10 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI11IM_Pos (27U) +#define SYSCFG_C2IMR1_EXTI11IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI11IM_Pos) /*!< 0x08000000 */ +#define SYSCFG_C2IMR1_EXTI11IM SYSCFG_C2IMR1_EXTI11IM_Msk /*!< Enabling of interrupt from External Interrupt Line 11 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI12IM_Pos (28U) +#define SYSCFG_C2IMR1_EXTI12IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI12IM_Pos) /*!< 0x10000000 */ +#define SYSCFG_C2IMR1_EXTI12IM SYSCFG_C2IMR1_EXTI12IM_Msk /*!< Enabling of interrupt from External Interrupt Line 12 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI13IM_Pos (29U) +#define SYSCFG_C2IMR1_EXTI13IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI13IM_Pos) /*!< 0x20000000 */ +#define SYSCFG_C2IMR1_EXTI13IM SYSCFG_C2IMR1_EXTI13IM_Msk /*!< Enabling of interrupt from External Interrupt Line 13 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI14IM_Pos (30U) +#define SYSCFG_C2IMR1_EXTI14IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI14IM_Pos) /*!< 0x40000000 */ +#define SYSCFG_C2IMR1_EXTI14IM SYSCFG_C2IMR1_EXTI14IM_Msk /*!< Enabling of interrupt from External Interrupt Line 14 to CPU2 */ +#define SYSCFG_C2IMR1_EXTI15IM_Pos (31U) +#define SYSCFG_C2IMR1_EXTI15IM_Msk (0x1UL << SYSCFG_C2IMR1_EXTI15IM_Pos) /*!< 0x80000000 */ +#define SYSCFG_C2IMR1_EXTI15IM SYSCFG_C2IMR1_EXTI15IM_Msk /*!< Enabling of interrupt from External Interrupt Line 15 to CPU2 */ + +/***************** Bit definition for SYSCFG_C2IMR2 register (Interrupt masks control and status register on CPU2 - part 2) *******************************************/ +#define SYSCFG_C2IMR2_DMA1CH1IM_Pos (0U) +#define SYSCFG_C2IMR2_DMA1CH1IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH1IM_Pos) /*!< 0x00000001 */ +#define SYSCFG_C2IMR2_DMA1CH1IM SYSCFG_C2IMR2_DMA1CH1IM_Msk /*!< Enabling of interrupt from DMA1 Channel 1 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH2IM_Pos (1U) +#define SYSCFG_C2IMR2_DMA1CH2IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH2IM_Pos) /*!< 0x00000002 */ +#define SYSCFG_C2IMR2_DMA1CH2IM SYSCFG_C2IMR2_DMA1CH2IM_Msk /*!< Enabling of interrupt from DMA1 Channel 2 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH3IM_Pos (2U) +#define SYSCFG_C2IMR2_DMA1CH3IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH3IM_Pos) /*!< 0x00000004 */ +#define SYSCFG_C2IMR2_DMA1CH3IM SYSCFG_C2IMR2_DMA1CH3IM_Msk /*!< Enabling of interrupt from DMA1 Channel 3 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH4IM_Pos (3U) +#define SYSCFG_C2IMR2_DMA1CH4IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH4IM_Pos) /*!< 0x00000008 */ +#define SYSCFG_C2IMR2_DMA1CH4IM SYSCFG_C2IMR2_DMA1CH4IM_Msk /*!< Enabling of interrupt from DMA1 Channel 4 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH5IM_Pos (4U) +#define SYSCFG_C2IMR2_DMA1CH5IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH5IM_Pos) /*!< 0x00000010 */ +#define SYSCFG_C2IMR2_DMA1CH5IM SYSCFG_C2IMR2_DMA1CH5IM_Msk /*!< Enabling of interrupt from DMA1 Channel 5 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH6IM_Pos (5U) +#define SYSCFG_C2IMR2_DMA1CH6IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH6IM_Pos) /*!< 0x00000020 */ +#define SYSCFG_C2IMR2_DMA1CH6IM SYSCFG_C2IMR2_DMA1CH6IM_Msk /*!< Enabling of interrupt from DMA1 Channel 6 to CPU2 */ +#define SYSCFG_C2IMR2_DMA1CH7IM_Pos (6U) +#define SYSCFG_C2IMR2_DMA1CH7IM_Msk (0x1UL << SYSCFG_C2IMR2_DMA1CH7IM_Pos) /*!< 0x00000040 */ +#define SYSCFG_C2IMR2_DMA1CH7IM SYSCFG_C2IMR2_DMA1CH7IM_Msk /*!< Enabling of interrupt from DMA1 Channel 7 to CPU2 */ +#define SYSCFG_C2IMR2_DMAMUX1IM_Pos (15U) +#define SYSCFG_C2IMR2_DMAMUX1IM_Msk (0x1UL << SYSCFG_C2IMR2_DMAMUX1IM_Pos) /*!< 0x00008000 */ +#define SYSCFG_C2IMR2_DMAMUX1IM SYSCFG_C2IMR2_DMAMUX1IM_Msk /*!< Enabling of interrupt from DMAMUX1 to CPU2 */ +#define SYSCFG_C2IMR2_PVM3IM_Pos (18U) +#define SYSCFG_C2IMR2_PVM3IM_Msk (0x1UL << SYSCFG_C2IMR2_PVM3IM_Pos) /*!< 0x00040000 */ +#define SYSCFG_C2IMR2_PVM3IM SYSCFG_C2IMR2_PVM3IM_Msk /*!< Enabling of interrupt from Power Voltage Monitoring 3 to CPU2 */ +#define SYSCFG_C2IMR2_PVDIM_Pos (20U) +#define SYSCFG_C2IMR2_PVDIM_Msk (0x1UL << SYSCFG_C2IMR2_PVDIM_Pos) /*!< 0x00100000 */ +#define SYSCFG_C2IMR2_PVDIM SYSCFG_C2IMR2_PVDIM_Msk /*!< Enabling of interrupt from Power Voltage Detector to CPU2 */ +#define SYSCFG_C2IMR2_TSCIM_Pos (21U) +#define SYSCFG_C2IMR2_TSCIM_Msk (0x1UL << SYSCFG_C2IMR2_TSCIM_Pos) /*!< 0x00200000 */ +#define SYSCFG_C2IMR2_TSCIM SYSCFG_C2IMR2_TSCIM_Msk /*!< Enabling of interrupt from Touch Sensing Controller to CPU2 */ + +/***************** Bit definition for SYSCFG_SIPCR register (SYSCFG secure IP control register) *****************************************************************************/ +#define SYSCFG_SIPCR_SAES2_Pos (1U) +#define SYSCFG_SIPCR_SAES2_Msk (0x1UL << SYSCFG_SIPCR_SAES2_Pos) /*!< 0x00000002 */ +#define SYSCFG_SIPCR_SAES2 SYSCFG_SIPCR_SAES2_Msk /*!< Enabling the security access of Advanced Encryption Standard 2 */ +#define SYSCFG_SIPCR_SPKA_Pos (2U) +#define SYSCFG_SIPCR_SPKA_Msk (0x1UL << SYSCFG_SIPCR_SPKA_Pos) /*!< 0x00000004 */ +#define SYSCFG_SIPCR_SPKA SYSCFG_SIPCR_SPKA_Msk /*!< Enabling the security access of Public Key Accelerator */ +#define SYSCFG_SIPCR_SRNG_Pos (3U) +#define SYSCFG_SIPCR_SRNG_Msk (0x1UL << SYSCFG_SIPCR_SRNG_Pos) /*!< 0x00000008 */ +#define SYSCFG_SIPCR_SRNG SYSCFG_SIPCR_SRNG_Msk /*!< Enabling the security access of Random Number Generator */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN_Pos (0U) +#define TIM_CR1_CEN_Msk (0x1UL << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ +#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!<Counter enable */ +#define TIM_CR1_UDIS_Pos (1U) +#define TIM_CR1_UDIS_Msk (0x1UL << TIM_CR1_UDIS_Pos) /*!< 0x00000002 */ +#define TIM_CR1_UDIS TIM_CR1_UDIS_Msk /*!<Update disable */ +#define TIM_CR1_URS_Pos (2U) +#define TIM_CR1_URS_Msk (0x1UL << TIM_CR1_URS_Pos) /*!< 0x00000004 */ +#define TIM_CR1_URS TIM_CR1_URS_Msk /*!<Update request source */ +#define TIM_CR1_OPM_Pos (3U) +#define TIM_CR1_OPM_Msk (0x1UL << TIM_CR1_OPM_Pos) /*!< 0x00000008 */ +#define TIM_CR1_OPM TIM_CR1_OPM_Msk /*!<One pulse mode */ +#define TIM_CR1_DIR_Pos (4U) +#define TIM_CR1_DIR_Msk (0x1UL << TIM_CR1_DIR_Pos) /*!< 0x00000010 */ +#define TIM_CR1_DIR TIM_CR1_DIR_Msk /*!<Direction */ + +#define TIM_CR1_CMS_Pos (5U) +#define TIM_CR1_CMS_Msk (0x3UL << TIM_CR1_CMS_Pos) /*!< 0x00000060 */ +#define TIM_CR1_CMS TIM_CR1_CMS_Msk /*!<CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 (0x1U << TIM_CR1_CMS_Pos) /*!< 0x00000020 */ +#define TIM_CR1_CMS_1 (0x2U << TIM_CR1_CMS_Pos) /*!< 0x00000040 */ + +#define TIM_CR1_ARPE_Pos (7U) +#define TIM_CR1_ARPE_Msk (0x1UL << TIM_CR1_ARPE_Pos) /*!< 0x00000080 */ +#define TIM_CR1_ARPE TIM_CR1_ARPE_Msk /*!<Auto-reload preload enable */ + +#define TIM_CR1_CKD_Pos (8U) +#define TIM_CR1_CKD_Msk (0x3UL << TIM_CR1_CKD_Pos) /*!< 0x00000300 */ +#define TIM_CR1_CKD TIM_CR1_CKD_Msk /*!<CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 (0x1U << TIM_CR1_CKD_Pos) /*!< 0x00000100 */ +#define TIM_CR1_CKD_1 (0x2U << TIM_CR1_CKD_Pos) /*!< 0x00000200 */ + +#define TIM_CR1_UIFREMAP_Pos (11U) +#define TIM_CR1_UIFREMAP_Msk (0x1UL << TIM_CR1_UIFREMAP_Pos) /*!< 0x00000800 */ +#define TIM_CR1_UIFREMAP TIM_CR1_UIFREMAP_Msk /*!<Update interrupt flag remap */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC_Pos (0U) +#define TIM_CR2_CCPC_Msk (0x1UL << TIM_CR2_CCPC_Pos) /*!< 0x00000001 */ +#define TIM_CR2_CCPC TIM_CR2_CCPC_Msk /*!<Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS_Pos (2U) +#define TIM_CR2_CCUS_Msk (0x1UL << TIM_CR2_CCUS_Pos) /*!< 0x00000004 */ +#define TIM_CR2_CCUS TIM_CR2_CCUS_Msk /*!<Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS_Pos (3U) +#define TIM_CR2_CCDS_Msk (0x1UL << TIM_CR2_CCDS_Pos) /*!< 0x00000008 */ +#define TIM_CR2_CCDS TIM_CR2_CCDS_Msk /*!<Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS_Pos (4U) +#define TIM_CR2_MMS_Msk (0x7UL << TIM_CR2_MMS_Pos) /*!< 0x00000070 */ +#define TIM_CR2_MMS TIM_CR2_MMS_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 (0x1U << TIM_CR2_MMS_Pos) /*!< 0x00000010 */ +#define TIM_CR2_MMS_1 (0x2U << TIM_CR2_MMS_Pos) /*!< 0x00000020 */ +#define TIM_CR2_MMS_2 (0x4U << TIM_CR2_MMS_Pos) /*!< 0x00000040 */ + +#define TIM_CR2_TI1S_Pos (7U) +#define TIM_CR2_TI1S_Msk (0x1UL << TIM_CR2_TI1S_Pos) /*!< 0x00000080 */ +#define TIM_CR2_TI1S TIM_CR2_TI1S_Msk /*!<TI1 Selection */ +#define TIM_CR2_OIS1_Pos (8U) +#define TIM_CR2_OIS1_Msk (0x1UL << TIM_CR2_OIS1_Pos) /*!< 0x00000100 */ +#define TIM_CR2_OIS1 TIM_CR2_OIS1_Msk /*!<Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N_Pos (9U) +#define TIM_CR2_OIS1N_Msk (0x1UL << TIM_CR2_OIS1N_Pos) /*!< 0x00000200 */ +#define TIM_CR2_OIS1N TIM_CR2_OIS1N_Msk /*!<Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2_Pos (10U) +#define TIM_CR2_OIS2_Msk (0x1UL << TIM_CR2_OIS2_Pos) /*!< 0x00000400 */ +#define TIM_CR2_OIS2 TIM_CR2_OIS2_Msk /*!<Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N_Pos (11U) +#define TIM_CR2_OIS2N_Msk (0x1UL << TIM_CR2_OIS2N_Pos) /*!< 0x00000800 */ +#define TIM_CR2_OIS2N TIM_CR2_OIS2N_Msk /*!<Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3_Pos (12U) +#define TIM_CR2_OIS3_Msk (0x1UL << TIM_CR2_OIS3_Pos) /*!< 0x00001000 */ +#define TIM_CR2_OIS3 TIM_CR2_OIS3_Msk /*!<Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N_Pos (13U) +#define TIM_CR2_OIS3N_Msk (0x1UL << TIM_CR2_OIS3N_Pos) /*!< 0x00002000 */ +#define TIM_CR2_OIS3N TIM_CR2_OIS3N_Msk /*!<Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4_Pos (14U) +#define TIM_CR2_OIS4_Msk (0x1UL << TIM_CR2_OIS4_Pos) /*!< 0x00004000 */ +#define TIM_CR2_OIS4 TIM_CR2_OIS4_Msk /*!<Output Idle state 4 (OC4 output) */ +#define TIM_CR2_OIS5_Pos (16U) +#define TIM_CR2_OIS5_Msk (0x1UL << TIM_CR2_OIS5_Pos) /*!< 0x00010000 */ +#define TIM_CR2_OIS5 TIM_CR2_OIS5_Msk /*!<Output Idle state 5 (OC5 output) */ +#define TIM_CR2_OIS6_Pos (18U) +#define TIM_CR2_OIS6_Msk (0x1UL << TIM_CR2_OIS6_Pos) /*!< 0x00040000 */ +#define TIM_CR2_OIS6 TIM_CR2_OIS6_Msk /*!<Output Idle state 6 (OC6 output) */ + +#define TIM_CR2_MMS2_Pos (20U) +#define TIM_CR2_MMS2_Msk (0xFUL << TIM_CR2_MMS2_Pos) /*!< 0x00F00000 */ +#define TIM_CR2_MMS2 TIM_CR2_MMS2_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS2_0 (0x1U << TIM_CR2_MMS2_Pos) /*!< 0x00100000 */ +#define TIM_CR2_MMS2_1 (0x2U << TIM_CR2_MMS2_Pos) /*!< 0x00200000 */ +#define TIM_CR2_MMS2_2 (0x4U << TIM_CR2_MMS2_Pos) /*!< 0x00400000 */ +#define TIM_CR2_MMS2_3 (0x8U << TIM_CR2_MMS2_Pos) /*!< 0x00800000 */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS_Pos (0U) +#define TIM_SMCR_SMS_Msk (0x10007UL << TIM_SMCR_SMS_Pos) /*!< 0x00010007 */ +#define TIM_SMCR_SMS TIM_SMCR_SMS_Msk /*!<SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 (0x00001U << TIM_SMCR_SMS_Pos) /*!< 0x00000001 */ +#define TIM_SMCR_SMS_1 (0x00002U << TIM_SMCR_SMS_Pos) /*!< 0x00000002 */ +#define TIM_SMCR_SMS_2 (0x00004U << TIM_SMCR_SMS_Pos) /*!< 0x00000004 */ +#define TIM_SMCR_SMS_3 (0x10000U << TIM_SMCR_SMS_Pos) /*!< 0x00010000 */ + +#define TIM_SMCR_OCCS_Pos (3U) +#define TIM_SMCR_OCCS_Msk (0x1UL << TIM_SMCR_OCCS_Pos) /*!< 0x00000008 */ +#define TIM_SMCR_OCCS TIM_SMCR_OCCS_Msk /*!< OCREF clear selection */ + +#define TIM_SMCR_TS_Pos (4U) +#define TIM_SMCR_TS_Msk (0x30007UL << TIM_SMCR_TS_Pos) /*!< 0x00300070 */ +#define TIM_SMCR_TS TIM_SMCR_TS_Msk /*!<TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 (0x00001U << TIM_SMCR_TS_Pos) /*!< 0x00000010 */ +#define TIM_SMCR_TS_1 (0x00002U << TIM_SMCR_TS_Pos) /*!< 0x00000020 */ +#define TIM_SMCR_TS_2 (0x00004U << TIM_SMCR_TS_Pos) /*!< 0x00000040 */ +#define TIM_SMCR_TS_3 (0x10000U << TIM_SMCR_TS_Pos) /*!< 0x00100000 */ +#define TIM_SMCR_TS_4 (0x20000U << TIM_SMCR_TS_Pos) /*!< 0x00200000 */ + +#define TIM_SMCR_MSM_Pos (7U) +#define TIM_SMCR_MSM_Msk (0x1UL << TIM_SMCR_MSM_Pos) /*!< 0x00000080 */ +#define TIM_SMCR_MSM TIM_SMCR_MSM_Msk /*!<Master/slave mode */ + +#define TIM_SMCR_ETF_Pos (8U) +#define TIM_SMCR_ETF_Msk (0xFUL << TIM_SMCR_ETF_Pos) /*!< 0x00000F00 */ +#define TIM_SMCR_ETF TIM_SMCR_ETF_Msk /*!<ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 (0x1U << TIM_SMCR_ETF_Pos) /*!< 0x00000100 */ +#define TIM_SMCR_ETF_1 (0x2U << TIM_SMCR_ETF_Pos) /*!< 0x00000200 */ +#define TIM_SMCR_ETF_2 (0x4U << TIM_SMCR_ETF_Pos) /*!< 0x00000400 */ +#define TIM_SMCR_ETF_3 (0x8U << TIM_SMCR_ETF_Pos) /*!< 0x00000800 */ + +#define TIM_SMCR_ETPS_Pos (12U) +#define TIM_SMCR_ETPS_Msk (0x3UL << TIM_SMCR_ETPS_Pos) /*!< 0x00003000 */ +#define TIM_SMCR_ETPS TIM_SMCR_ETPS_Msk /*!<ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 (0x1U << TIM_SMCR_ETPS_Pos) /*!< 0x00001000 */ +#define TIM_SMCR_ETPS_1 (0x2U << TIM_SMCR_ETPS_Pos) /*!< 0x00002000 */ + +#define TIM_SMCR_ECE_Pos (14U) +#define TIM_SMCR_ECE_Msk (0x1UL << TIM_SMCR_ECE_Pos) /*!< 0x00004000 */ +#define TIM_SMCR_ECE TIM_SMCR_ECE_Msk /*!<External clock enable */ +#define TIM_SMCR_ETP_Pos (15U) +#define TIM_SMCR_ETP_Msk (0x1UL << TIM_SMCR_ETP_Pos) /*!< 0x00008000 */ +#define TIM_SMCR_ETP TIM_SMCR_ETP_Msk /*!<External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE_Pos (0U) +#define TIM_DIER_UIE_Msk (0x1UL << TIM_DIER_UIE_Pos) /*!< 0x00000001 */ +#define TIM_DIER_UIE TIM_DIER_UIE_Msk /*!<Update interrupt enable */ +#define TIM_DIER_CC1IE_Pos (1U) +#define TIM_DIER_CC1IE_Msk (0x1UL << TIM_DIER_CC1IE_Pos) /*!< 0x00000002 */ +#define TIM_DIER_CC1IE TIM_DIER_CC1IE_Msk /*!<Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE_Pos (2U) +#define TIM_DIER_CC2IE_Msk (0x1UL << TIM_DIER_CC2IE_Pos) /*!< 0x00000004 */ +#define TIM_DIER_CC2IE TIM_DIER_CC2IE_Msk /*!<Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE_Pos (3U) +#define TIM_DIER_CC3IE_Msk (0x1UL << TIM_DIER_CC3IE_Pos) /*!< 0x00000008 */ +#define TIM_DIER_CC3IE TIM_DIER_CC3IE_Msk /*!<Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE_Pos (4U) +#define TIM_DIER_CC4IE_Msk (0x1UL << TIM_DIER_CC4IE_Pos) /*!< 0x00000010 */ +#define TIM_DIER_CC4IE TIM_DIER_CC4IE_Msk /*!<Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE_Pos (5U) +#define TIM_DIER_COMIE_Msk (0x1UL << TIM_DIER_COMIE_Pos) /*!< 0x00000020 */ +#define TIM_DIER_COMIE TIM_DIER_COMIE_Msk /*!<COM interrupt enable */ +#define TIM_DIER_TIE_Pos (6U) +#define TIM_DIER_TIE_Msk (0x1UL << TIM_DIER_TIE_Pos) /*!< 0x00000040 */ +#define TIM_DIER_TIE TIM_DIER_TIE_Msk /*!<Trigger interrupt enable */ +#define TIM_DIER_BIE_Pos (7U) +#define TIM_DIER_BIE_Msk (0x1UL << TIM_DIER_BIE_Pos) /*!< 0x00000080 */ +#define TIM_DIER_BIE TIM_DIER_BIE_Msk /*!<Break interrupt enable */ +#define TIM_DIER_UDE_Pos (8U) +#define TIM_DIER_UDE_Msk (0x1UL << TIM_DIER_UDE_Pos) /*!< 0x00000100 */ +#define TIM_DIER_UDE TIM_DIER_UDE_Msk /*!<Update DMA request enable */ +#define TIM_DIER_CC1DE_Pos (9U) +#define TIM_DIER_CC1DE_Msk (0x1UL << TIM_DIER_CC1DE_Pos) /*!< 0x00000200 */ +#define TIM_DIER_CC1DE TIM_DIER_CC1DE_Msk /*!<Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE_Pos (10U) +#define TIM_DIER_CC2DE_Msk (0x1UL << TIM_DIER_CC2DE_Pos) /*!< 0x00000400 */ +#define TIM_DIER_CC2DE TIM_DIER_CC2DE_Msk /*!<Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE_Pos (11U) +#define TIM_DIER_CC3DE_Msk (0x1UL << TIM_DIER_CC3DE_Pos) /*!< 0x00000800 */ +#define TIM_DIER_CC3DE TIM_DIER_CC3DE_Msk /*!<Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE_Pos (12U) +#define TIM_DIER_CC4DE_Msk (0x1UL << TIM_DIER_CC4DE_Pos) /*!< 0x00001000 */ +#define TIM_DIER_CC4DE TIM_DIER_CC4DE_Msk /*!<Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE_Pos (13U) +#define TIM_DIER_COMDE_Msk (0x1UL << TIM_DIER_COMDE_Pos) /*!< 0x00002000 */ +#define TIM_DIER_COMDE TIM_DIER_COMDE_Msk /*!<COM DMA request enable */ +#define TIM_DIER_TDE_Pos (14U) +#define TIM_DIER_TDE_Msk (0x1UL << TIM_DIER_TDE_Pos) /*!< 0x00004000 */ +#define TIM_DIER_TDE TIM_DIER_TDE_Msk /*!<Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF_Pos (0U) +#define TIM_SR_UIF_Msk (0x1UL << TIM_SR_UIF_Pos) /*!< 0x00000001 */ +#define TIM_SR_UIF TIM_SR_UIF_Msk /*!<Update interrupt Flag */ +#define TIM_SR_CC1IF_Pos (1U) +#define TIM_SR_CC1IF_Msk (0x1UL << TIM_SR_CC1IF_Pos) /*!< 0x00000002 */ +#define TIM_SR_CC1IF TIM_SR_CC1IF_Msk /*!<Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF_Pos (2U) +#define TIM_SR_CC2IF_Msk (0x1UL << TIM_SR_CC2IF_Pos) /*!< 0x00000004 */ +#define TIM_SR_CC2IF TIM_SR_CC2IF_Msk /*!<Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF_Pos (3U) +#define TIM_SR_CC3IF_Msk (0x1UL << TIM_SR_CC3IF_Pos) /*!< 0x00000008 */ +#define TIM_SR_CC3IF TIM_SR_CC3IF_Msk /*!<Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF_Pos (4U) +#define TIM_SR_CC4IF_Msk (0x1UL << TIM_SR_CC4IF_Pos) /*!< 0x00000010 */ +#define TIM_SR_CC4IF TIM_SR_CC4IF_Msk /*!<Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF_Pos (5U) +#define TIM_SR_COMIF_Msk (0x1UL << TIM_SR_COMIF_Pos) /*!< 0x00000020 */ +#define TIM_SR_COMIF TIM_SR_COMIF_Msk /*!<COM interrupt Flag */ +#define TIM_SR_TIF_Pos (6U) +#define TIM_SR_TIF_Msk (0x1UL << TIM_SR_TIF_Pos) /*!< 0x00000040 */ +#define TIM_SR_TIF TIM_SR_TIF_Msk /*!<Trigger interrupt Flag */ +#define TIM_SR_BIF_Pos (7U) +#define TIM_SR_BIF_Msk (0x1UL << TIM_SR_BIF_Pos) /*!< 0x00000080 */ +#define TIM_SR_BIF TIM_SR_BIF_Msk /*!<Break interrupt Flag */ +#define TIM_SR_B2IF_Pos (8U) +#define TIM_SR_B2IF_Msk (0x1UL << TIM_SR_B2IF_Pos) /*!< 0x00000100 */ +#define TIM_SR_B2IF TIM_SR_B2IF_Msk /*!<Break 2 interrupt Flag */ +#define TIM_SR_CC1OF_Pos (9U) +#define TIM_SR_CC1OF_Msk (0x1UL << TIM_SR_CC1OF_Pos) /*!< 0x00000200 */ +#define TIM_SR_CC1OF TIM_SR_CC1OF_Msk /*!<Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF_Pos (10U) +#define TIM_SR_CC2OF_Msk (0x1UL << TIM_SR_CC2OF_Pos) /*!< 0x00000400 */ +#define TIM_SR_CC2OF TIM_SR_CC2OF_Msk /*!<Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF_Pos (11U) +#define TIM_SR_CC3OF_Msk (0x1UL << TIM_SR_CC3OF_Pos) /*!< 0x00000800 */ +#define TIM_SR_CC3OF TIM_SR_CC3OF_Msk /*!<Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF_Pos (12U) +#define TIM_SR_CC4OF_Msk (0x1UL << TIM_SR_CC4OF_Pos) /*!< 0x00001000 */ +#define TIM_SR_CC4OF TIM_SR_CC4OF_Msk /*!<Capture/Compare 4 Overcapture Flag */ +#define TIM_SR_SBIF_Pos (13U) +#define TIM_SR_SBIF_Msk (0x1UL << TIM_SR_SBIF_Pos) /*!< 0x00002000 */ +#define TIM_SR_SBIF TIM_SR_SBIF_Msk /*!<System Break interrupt Flag */ +#define TIM_SR_CC5IF_Pos (16U) +#define TIM_SR_CC5IF_Msk (0x1UL << TIM_SR_CC5IF_Pos) /*!< 0x00010000 */ +#define TIM_SR_CC5IF TIM_SR_CC5IF_Msk /*!<Capture/Compare 5 interrupt Flag */ +#define TIM_SR_CC6IF_Pos (17U) +#define TIM_SR_CC6IF_Msk (0x1UL << TIM_SR_CC6IF_Pos) /*!< 0x00020000 */ +#define TIM_SR_CC6IF TIM_SR_CC6IF_Msk /*!<Capture/Compare 6 interrupt Flag */ + + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG_Pos (0U) +#define TIM_EGR_UG_Msk (0x1UL << TIM_EGR_UG_Pos) /*!< 0x00000001 */ +#define TIM_EGR_UG TIM_EGR_UG_Msk /*!<Update Generation */ +#define TIM_EGR_CC1G_Pos (1U) +#define TIM_EGR_CC1G_Msk (0x1UL << TIM_EGR_CC1G_Pos) /*!< 0x00000002 */ +#define TIM_EGR_CC1G TIM_EGR_CC1G_Msk /*!<Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G_Pos (2U) +#define TIM_EGR_CC2G_Msk (0x1UL << TIM_EGR_CC2G_Pos) /*!< 0x00000004 */ +#define TIM_EGR_CC2G TIM_EGR_CC2G_Msk /*!<Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G_Pos (3U) +#define TIM_EGR_CC3G_Msk (0x1UL << TIM_EGR_CC3G_Pos) /*!< 0x00000008 */ +#define TIM_EGR_CC3G TIM_EGR_CC3G_Msk /*!<Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G_Pos (4U) +#define TIM_EGR_CC4G_Msk (0x1UL << TIM_EGR_CC4G_Pos) /*!< 0x00000010 */ +#define TIM_EGR_CC4G TIM_EGR_CC4G_Msk /*!<Capture/Compare 4 Generation */ +#define TIM_EGR_COMG_Pos (5U) +#define TIM_EGR_COMG_Msk (0x1UL << TIM_EGR_COMG_Pos) /*!< 0x00000020 */ +#define TIM_EGR_COMG TIM_EGR_COMG_Msk /*!<Capture/Compare Control Update Generation */ +#define TIM_EGR_TG_Pos (6U) +#define TIM_EGR_TG_Msk (0x1UL << TIM_EGR_TG_Pos) /*!< 0x00000040 */ +#define TIM_EGR_TG TIM_EGR_TG_Msk /*!<Trigger Generation */ +#define TIM_EGR_BG_Pos (7U) +#define TIM_EGR_BG_Msk (0x1UL << TIM_EGR_BG_Pos) /*!< 0x00000080 */ +#define TIM_EGR_BG TIM_EGR_BG_Msk /*!<Break Generation */ +#define TIM_EGR_B2G_Pos (8U) +#define TIM_EGR_B2G_Msk (0x1UL << TIM_EGR_B2G_Pos) /*!< 0x00000100 */ +#define TIM_EGR_B2G TIM_EGR_B2G_Msk /*!<Break 2 Generation */ + + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S_Pos (0U) +#define TIM_CCMR1_CC1S_Msk (0x3UL << TIM_CCMR1_CC1S_Pos) /*!< 0x00000003 */ +#define TIM_CCMR1_CC1S TIM_CCMR1_CC1S_Msk /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 (0x1U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000001 */ +#define TIM_CCMR1_CC1S_1 (0x2U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000002 */ + +#define TIM_CCMR1_OC1FE_Pos (2U) +#define TIM_CCMR1_OC1FE_Msk (0x1UL << TIM_CCMR1_OC1FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR1_OC1FE TIM_CCMR1_OC1FE_Msk /*!<Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE_Pos (3U) +#define TIM_CCMR1_OC1PE_Msk (0x1UL << TIM_CCMR1_OC1PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR1_OC1PE TIM_CCMR1_OC1PE_Msk /*!<Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M_Pos (4U) +#define TIM_CCMR1_OC1M_Msk (0x1007UL << TIM_CCMR1_OC1M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR1_OC1M TIM_CCMR1_OC1M_Msk /*!<OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 (0x0001U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR1_OC1M_1 (0x0002U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR1_OC1M_2 (0x0004U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR1_OC1M_3 (0x1000U << TIM_CCMR1_OC1M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR1_OC1CE_Pos (7U) +#define TIM_CCMR1_OC1CE_Msk (0x1UL << TIM_CCMR1_OC1CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR1_OC1CE TIM_CCMR1_OC1CE_Msk /*!<Output Compare 1 Clear Enable */ + +#define TIM_CCMR1_CC2S_Pos (8U) +#define TIM_CCMR1_CC2S_Msk (0x3UL << TIM_CCMR1_CC2S_Pos) /*!< 0x00000300 */ +#define TIM_CCMR1_CC2S TIM_CCMR1_CC2S_Msk /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 (0x1U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000100 */ +#define TIM_CCMR1_CC2S_1 (0x2U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000200 */ + +#define TIM_CCMR1_OC2FE_Pos (10U) +#define TIM_CCMR1_OC2FE_Msk (0x1UL << TIM_CCMR1_OC2FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR1_OC2FE TIM_CCMR1_OC2FE_Msk /*!<Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE_Pos (11U) +#define TIM_CCMR1_OC2PE_Msk (0x1UL << TIM_CCMR1_OC2PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR1_OC2PE TIM_CCMR1_OC2PE_Msk /*!<Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M_Pos (12U) +#define TIM_CCMR1_OC2M_Msk (0x1007UL << TIM_CCMR1_OC2M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR1_OC2M TIM_CCMR1_OC2M_Msk /*!<OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 (0x0001U << TIM_CCMR1_OC2M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR1_OC2M_1 (0x0002U << TIM_CCMR1_OC2M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR1_OC2M_2 (0x0004U << TIM_CCMR1_OC2M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR1_OC2M_3 (0x1000U << TIM_CCMR1_OC2M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR1_OC2CE_Pos (15U) +#define TIM_CCMR1_OC2CE_Msk (0x1UL << TIM_CCMR1_OC2CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR1_OC2CE TIM_CCMR1_OC2CE_Msk /*!<Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ +#define TIM_CCMR1_IC1PSC_Pos (2U) +#define TIM_CCMR1_IC1PSC_Msk (0x3UL << TIM_CCMR1_IC1PSC_Pos) /*!< 0x0000000C */ +#define TIM_CCMR1_IC1PSC TIM_CCMR1_IC1PSC_Msk /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 (0x1U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000004 */ +#define TIM_CCMR1_IC1PSC_1 (0x2U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000008 */ + +#define TIM_CCMR1_IC1F_Pos (4U) +#define TIM_CCMR1_IC1F_Msk (0xFUL << TIM_CCMR1_IC1F_Pos) /*!< 0x000000F0 */ +#define TIM_CCMR1_IC1F TIM_CCMR1_IC1F_Msk /*!<IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 (0x1U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000010 */ +#define TIM_CCMR1_IC1F_1 (0x2U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000020 */ +#define TIM_CCMR1_IC1F_2 (0x4U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000040 */ +#define TIM_CCMR1_IC1F_3 (0x8U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000080 */ + +#define TIM_CCMR1_IC2PSC_Pos (10U) +#define TIM_CCMR1_IC2PSC_Msk (0x3UL << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000C00 */ +#define TIM_CCMR1_IC2PSC TIM_CCMR1_IC2PSC_Msk /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 (0x1U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000400 */ +#define TIM_CCMR1_IC2PSC_1 (0x2U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000800 */ + +#define TIM_CCMR1_IC2F_Pos (12U) +#define TIM_CCMR1_IC2F_Msk (0xFUL << TIM_CCMR1_IC2F_Pos) /*!< 0x0000F000 */ +#define TIM_CCMR1_IC2F TIM_CCMR1_IC2F_Msk /*!<IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 (0x1U << TIM_CCMR1_IC2F_Pos) /*!< 0x00001000 */ +#define TIM_CCMR1_IC2F_1 (0x2U << TIM_CCMR1_IC2F_Pos) /*!< 0x00002000 */ +#define TIM_CCMR1_IC2F_2 (0x4U << TIM_CCMR1_IC2F_Pos) /*!< 0x00004000 */ +#define TIM_CCMR1_IC2F_3 (0x8U << TIM_CCMR1_IC2F_Pos) /*!< 0x00008000 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S_Pos (0U) +#define TIM_CCMR2_CC3S_Msk (0x3UL << TIM_CCMR2_CC3S_Pos) /*!< 0x00000003 */ +#define TIM_CCMR2_CC3S TIM_CCMR2_CC3S_Msk /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 (0x1U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000001 */ +#define TIM_CCMR2_CC3S_1 (0x2U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000002 */ + +#define TIM_CCMR2_OC3FE_Pos (2U) +#define TIM_CCMR2_OC3FE_Msk (0x1UL << TIM_CCMR2_OC3FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR2_OC3FE TIM_CCMR2_OC3FE_Msk /*!<Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE_Pos (3U) +#define TIM_CCMR2_OC3PE_Msk (0x1UL << TIM_CCMR2_OC3PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR2_OC3PE TIM_CCMR2_OC3PE_Msk /*!<Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M_Pos (4U) +#define TIM_CCMR2_OC3M_Msk (0x1007UL << TIM_CCMR2_OC3M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR2_OC3M TIM_CCMR2_OC3M_Msk /*!<OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 (0x0001U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR2_OC3M_1 (0x0002U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR2_OC3M_2 (0x0004U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR2_OC3M_3 (0x1000U << TIM_CCMR2_OC3M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR2_OC3CE_Pos (7U) +#define TIM_CCMR2_OC3CE_Msk (0x1UL << TIM_CCMR2_OC3CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR2_OC3CE TIM_CCMR2_OC3CE_Msk /*!<Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S_Pos (8U) +#define TIM_CCMR2_CC4S_Msk (0x3UL << TIM_CCMR2_CC4S_Pos) /*!< 0x00000300 */ +#define TIM_CCMR2_CC4S TIM_CCMR2_CC4S_Msk /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 (0x1U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000100 */ +#define TIM_CCMR2_CC4S_1 (0x2U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000200 */ + +#define TIM_CCMR2_OC4FE_Pos (10U) +#define TIM_CCMR2_OC4FE_Msk (0x1UL << TIM_CCMR2_OC4FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR2_OC4FE TIM_CCMR2_OC4FE_Msk /*!<Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE_Pos (11U) +#define TIM_CCMR2_OC4PE_Msk (0x1UL << TIM_CCMR2_OC4PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR2_OC4PE TIM_CCMR2_OC4PE_Msk /*!<Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M_Pos (12U) +#define TIM_CCMR2_OC4M_Msk (0x1007UL << TIM_CCMR2_OC4M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR2_OC4M TIM_CCMR2_OC4M_Msk /*!<OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 (0x0001U << TIM_CCMR2_OC4M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR2_OC4M_1 (0x0002U << TIM_CCMR2_OC4M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR2_OC4M_2 (0x0004U << TIM_CCMR2_OC4M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR2_OC4M_3 (0x1000U << TIM_CCMR2_OC4M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR2_OC4CE_Pos (15U) +#define TIM_CCMR2_OC4CE_Msk (0x1UL << TIM_CCMR2_OC4CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR2_OC4CE TIM_CCMR2_OC4CE_Msk /*!<Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ +#define TIM_CCMR2_IC3PSC_Pos (2U) +#define TIM_CCMR2_IC3PSC_Msk (0x3UL << TIM_CCMR2_IC3PSC_Pos) /*!< 0x0000000C */ +#define TIM_CCMR2_IC3PSC TIM_CCMR2_IC3PSC_Msk /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 (0x1U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000004 */ +#define TIM_CCMR2_IC3PSC_1 (0x2U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000008 */ + +#define TIM_CCMR2_IC3F_Pos (4U) +#define TIM_CCMR2_IC3F_Msk (0xFUL << TIM_CCMR2_IC3F_Pos) /*!< 0x000000F0 */ +#define TIM_CCMR2_IC3F TIM_CCMR2_IC3F_Msk /*!<IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 (0x1U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000010 */ +#define TIM_CCMR2_IC3F_1 (0x2U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000020 */ +#define TIM_CCMR2_IC3F_2 (0x4U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000040 */ +#define TIM_CCMR2_IC3F_3 (0x8U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000080 */ + +#define TIM_CCMR2_IC4PSC_Pos (10U) +#define TIM_CCMR2_IC4PSC_Msk (0x3UL << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000C00 */ +#define TIM_CCMR2_IC4PSC TIM_CCMR2_IC4PSC_Msk /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 (0x1U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000400 */ +#define TIM_CCMR2_IC4PSC_1 (0x2U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000800 */ + +#define TIM_CCMR2_IC4F_Pos (12U) +#define TIM_CCMR2_IC4F_Msk (0xFUL << TIM_CCMR2_IC4F_Pos) /*!< 0x0000F000 */ +#define TIM_CCMR2_IC4F TIM_CCMR2_IC4F_Msk /*!<IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 (0x1U << TIM_CCMR2_IC4F_Pos) /*!< 0x00001000 */ +#define TIM_CCMR2_IC4F_1 (0x2U << TIM_CCMR2_IC4F_Pos) /*!< 0x00002000 */ +#define TIM_CCMR2_IC4F_2 (0x4U << TIM_CCMR2_IC4F_Pos) /*!< 0x00004000 */ +#define TIM_CCMR2_IC4F_3 (0x8U << TIM_CCMR2_IC4F_Pos) /*!< 0x00008000 */ + +/****************** Bit definition for TIM_CCMR3 register *******************/ +#define TIM_CCMR3_OC5FE_Pos (2U) +#define TIM_CCMR3_OC5FE_Msk (0x1UL << TIM_CCMR3_OC5FE_Pos) /*!< 0x00000004 */ +#define TIM_CCMR3_OC5FE TIM_CCMR3_OC5FE_Msk /*!<Output Compare 5 Fast enable */ +#define TIM_CCMR3_OC5PE_Pos (3U) +#define TIM_CCMR3_OC5PE_Msk (0x1UL << TIM_CCMR3_OC5PE_Pos) /*!< 0x00000008 */ +#define TIM_CCMR3_OC5PE TIM_CCMR3_OC5PE_Msk /*!<Output Compare 5 Preload enable */ + +#define TIM_CCMR3_OC5M_Pos (4U) +#define TIM_CCMR3_OC5M_Msk (0x1007UL << TIM_CCMR3_OC5M_Pos) /*!< 0x00010070 */ +#define TIM_CCMR3_OC5M TIM_CCMR3_OC5M_Msk /*!<OC5M[3:0] bits (Output Compare 5 Mode) */ +#define TIM_CCMR3_OC5M_0 (0x0001U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000010 */ +#define TIM_CCMR3_OC5M_1 (0x0002U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000020 */ +#define TIM_CCMR3_OC5M_2 (0x0004U << TIM_CCMR3_OC5M_Pos) /*!< 0x00000040 */ +#define TIM_CCMR3_OC5M_3 (0x1000U << TIM_CCMR3_OC5M_Pos) /*!< 0x00010000 */ + +#define TIM_CCMR3_OC5CE_Pos (7U) +#define TIM_CCMR3_OC5CE_Msk (0x1UL << TIM_CCMR3_OC5CE_Pos) /*!< 0x00000080 */ +#define TIM_CCMR3_OC5CE TIM_CCMR3_OC5CE_Msk /*!<Output Compare 5 Clear Enable */ + +#define TIM_CCMR3_OC6FE_Pos (10U) +#define TIM_CCMR3_OC6FE_Msk (0x1UL << TIM_CCMR3_OC6FE_Pos) /*!< 0x00000400 */ +#define TIM_CCMR3_OC6FE TIM_CCMR3_OC6FE_Msk /*!<Output Compare 6 Fast enable */ +#define TIM_CCMR3_OC6PE_Pos (11U) +#define TIM_CCMR3_OC6PE_Msk (0x1UL << TIM_CCMR3_OC6PE_Pos) /*!< 0x00000800 */ +#define TIM_CCMR3_OC6PE TIM_CCMR3_OC6PE_Msk /*!<Output Compare 6 Preload enable */ + +#define TIM_CCMR3_OC6M_Pos (12U) +#define TIM_CCMR3_OC6M_Msk (0x1007UL << TIM_CCMR3_OC6M_Pos) /*!< 0x01007000 */ +#define TIM_CCMR3_OC6M TIM_CCMR3_OC6M_Msk /*!<OC6M[3:0] bits (Output Compare 6 Mode) */ +#define TIM_CCMR3_OC6M_0 (0x0001U << TIM_CCMR3_OC6M_Pos) /*!< 0x00001000 */ +#define TIM_CCMR3_OC6M_1 (0x0002U << TIM_CCMR3_OC6M_Pos) /*!< 0x00002000 */ +#define TIM_CCMR3_OC6M_2 (0x0004U << TIM_CCMR3_OC6M_Pos) /*!< 0x00004000 */ +#define TIM_CCMR3_OC6M_3 (0x1000U << TIM_CCMR3_OC6M_Pos) /*!< 0x01000000 */ + +#define TIM_CCMR3_OC6CE_Pos (15U) +#define TIM_CCMR3_OC6CE_Msk (0x1UL << TIM_CCMR3_OC6CE_Pos) /*!< 0x00008000 */ +#define TIM_CCMR3_OC6CE TIM_CCMR3_OC6CE_Msk /*!<Output Compare 6 Clear Enable */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E_Pos (0U) +#define TIM_CCER_CC1E_Msk (0x1UL << TIM_CCER_CC1E_Pos) /*!< 0x00000001 */ +#define TIM_CCER_CC1E TIM_CCER_CC1E_Msk /*!<Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P_Pos (1U) +#define TIM_CCER_CC1P_Msk (0x1UL << TIM_CCER_CC1P_Pos) /*!< 0x00000002 */ +#define TIM_CCER_CC1P TIM_CCER_CC1P_Msk /*!<Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE_Pos (2U) +#define TIM_CCER_CC1NE_Msk (0x1UL << TIM_CCER_CC1NE_Pos) /*!< 0x00000004 */ +#define TIM_CCER_CC1NE TIM_CCER_CC1NE_Msk /*!<Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP_Pos (3U) +#define TIM_CCER_CC1NP_Msk (0x1UL << TIM_CCER_CC1NP_Pos) /*!< 0x00000008 */ +#define TIM_CCER_CC1NP TIM_CCER_CC1NP_Msk /*!<Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E_Pos (4U) +#define TIM_CCER_CC2E_Msk (0x1UL << TIM_CCER_CC2E_Pos) /*!< 0x00000010 */ +#define TIM_CCER_CC2E TIM_CCER_CC2E_Msk /*!<Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P_Pos (5U) +#define TIM_CCER_CC2P_Msk (0x1UL << TIM_CCER_CC2P_Pos) /*!< 0x00000020 */ +#define TIM_CCER_CC2P TIM_CCER_CC2P_Msk /*!<Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE_Pos (6U) +#define TIM_CCER_CC2NE_Msk (0x1UL << TIM_CCER_CC2NE_Pos) /*!< 0x00000040 */ +#define TIM_CCER_CC2NE TIM_CCER_CC2NE_Msk /*!<Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP_Pos (7U) +#define TIM_CCER_CC2NP_Msk (0x1UL << TIM_CCER_CC2NP_Pos) /*!< 0x00000080 */ +#define TIM_CCER_CC2NP TIM_CCER_CC2NP_Msk /*!<Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E_Pos (8U) +#define TIM_CCER_CC3E_Msk (0x1UL << TIM_CCER_CC3E_Pos) /*!< 0x00000100 */ +#define TIM_CCER_CC3E TIM_CCER_CC3E_Msk /*!<Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P_Pos (9U) +#define TIM_CCER_CC3P_Msk (0x1UL << TIM_CCER_CC3P_Pos) /*!< 0x00000200 */ +#define TIM_CCER_CC3P TIM_CCER_CC3P_Msk /*!<Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE_Pos (10U) +#define TIM_CCER_CC3NE_Msk (0x1UL << TIM_CCER_CC3NE_Pos) /*!< 0x00000400 */ +#define TIM_CCER_CC3NE TIM_CCER_CC3NE_Msk /*!<Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP_Pos (11U) +#define TIM_CCER_CC3NP_Msk (0x1UL << TIM_CCER_CC3NP_Pos) /*!< 0x00000800 */ +#define TIM_CCER_CC3NP TIM_CCER_CC3NP_Msk /*!<Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E_Pos (12U) +#define TIM_CCER_CC4E_Msk (0x1UL << TIM_CCER_CC4E_Pos) /*!< 0x00001000 */ +#define TIM_CCER_CC4E TIM_CCER_CC4E_Msk /*!<Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P_Pos (13U) +#define TIM_CCER_CC4P_Msk (0x1UL << TIM_CCER_CC4P_Pos) /*!< 0x00002000 */ +#define TIM_CCER_CC4P TIM_CCER_CC4P_Msk /*!<Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP_Pos (15U) +#define TIM_CCER_CC4NP_Msk (0x1UL << TIM_CCER_CC4NP_Pos) /*!< 0x00008000 */ +#define TIM_CCER_CC4NP TIM_CCER_CC4NP_Msk /*!<Capture/Compare 4 Complementary output Polarity */ +#define TIM_CCER_CC5E_Pos (16U) +#define TIM_CCER_CC5E_Msk (0x1UL << TIM_CCER_CC5E_Pos) /*!< 0x00010000 */ +#define TIM_CCER_CC5E TIM_CCER_CC5E_Msk /*!<Capture/Compare 5 output enable */ +#define TIM_CCER_CC5P_Pos (17U) +#define TIM_CCER_CC5P_Msk (0x1UL << TIM_CCER_CC5P_Pos) /*!< 0x00020000 */ +#define TIM_CCER_CC5P TIM_CCER_CC5P_Msk /*!<Capture/Compare 5 output Polarity */ +#define TIM_CCER_CC6E_Pos (20U) +#define TIM_CCER_CC6E_Msk (0x1UL << TIM_CCER_CC6E_Pos) /*!< 0x00100000 */ +#define TIM_CCER_CC6E TIM_CCER_CC6E_Msk /*!<Capture/Compare 6 output enable */ +#define TIM_CCER_CC6P_Pos (21U) +#define TIM_CCER_CC6P_Msk (0x1UL << TIM_CCER_CC6P_Pos) /*!< 0x00200000 */ +#define TIM_CCER_CC6P TIM_CCER_CC6P_Msk /*!<Capture/Compare 6 output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT_Pos (0U) +#define TIM_CNT_CNT_Msk (0xFFFFFFFFUL << TIM_CNT_CNT_Pos) /*!< 0xFFFFFFFF */ +#define TIM_CNT_CNT TIM_CNT_CNT_Msk /*!<Counter Value */ +#define TIM_CNT_UIFCPY_Pos (31U) +#define TIM_CNT_UIFCPY_Msk (0x1UL << TIM_CNT_UIFCPY_Pos) /*!< 0x80000000 */ +#define TIM_CNT_UIFCPY TIM_CNT_UIFCPY_Msk /*!<Update interrupt flag copy (if UIFREMAP=1) */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC_Pos (0U) +#define TIM_PSC_PSC_Msk (0xFFFFUL << TIM_PSC_PSC_Pos) /*!< 0x0000FFFF */ +#define TIM_PSC_PSC TIM_PSC_PSC_Msk /*!<Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR_Pos (0U) +#define TIM_ARR_ARR_Msk (0xFFFFFFFFUL << TIM_ARR_ARR_Pos) /*!< 0xFFFFFFFF */ +#define TIM_ARR_ARR TIM_ARR_ARR_Msk /*!<Actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP_Pos (0U) +#define TIM_RCR_REP_Msk (0xFFFFUL << TIM_RCR_REP_Pos) /*!< 0x0000FFFF */ +#define TIM_RCR_REP TIM_RCR_REP_Msk /*!<Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1_Pos (0U) +#define TIM_CCR1_CCR1_Msk (0xFFFFUL << TIM_CCR1_CCR1_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR1_CCR1 TIM_CCR1_CCR1_Msk /*!<Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2_Pos (0U) +#define TIM_CCR2_CCR2_Msk (0xFFFFUL << TIM_CCR2_CCR2_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR2_CCR2 TIM_CCR2_CCR2_Msk /*!<Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3_Pos (0U) +#define TIM_CCR3_CCR3_Msk (0xFFFFUL << TIM_CCR3_CCR3_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR3_CCR3 TIM_CCR3_CCR3_Msk /*!<Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4_Pos (0U) +#define TIM_CCR4_CCR4_Msk (0xFFFFUL << TIM_CCR4_CCR4_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR4_CCR4 TIM_CCR4_CCR4_Msk /*!<Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_CCR5 register *******************/ +#define TIM_CCR5_CCR5_Pos (0U) +#define TIM_CCR5_CCR5_Msk (0xFFFFFFFFUL << TIM_CCR5_CCR5_Pos) /*!< 0xFFFFFFFF */ +#define TIM_CCR5_CCR5 TIM_CCR5_CCR5_Msk /*!<Capture/Compare 5 Value */ +#define TIM_CCR5_GC5C1_Pos (29U) +#define TIM_CCR5_GC5C1_Msk (0x1UL << TIM_CCR5_GC5C1_Pos) /*!< 0x20000000 */ +#define TIM_CCR5_GC5C1 TIM_CCR5_GC5C1_Msk /*!<Group Channel 5 and Channel 1 */ +#define TIM_CCR5_GC5C2_Pos (30U) +#define TIM_CCR5_GC5C2_Msk (0x1UL << TIM_CCR5_GC5C2_Pos) /*!< 0x40000000 */ +#define TIM_CCR5_GC5C2 TIM_CCR5_GC5C2_Msk /*!<Group Channel 5 and Channel 2 */ +#define TIM_CCR5_GC5C3_Pos (31U) +#define TIM_CCR5_GC5C3_Msk (0x1UL << TIM_CCR5_GC5C3_Pos) /*!< 0x80000000 */ +#define TIM_CCR5_GC5C3 TIM_CCR5_GC5C3_Msk /*!<Group Channel 5 and Channel 3 */ + +/******************* Bit definition for TIM_CCR6 register *******************/ +#define TIM_CCR6_CCR6_Pos (0U) +#define TIM_CCR6_CCR6_Msk (0xFFFFUL << TIM_CCR6_CCR6_Pos) /*!< 0x0000FFFF */ +#define TIM_CCR6_CCR6 TIM_CCR6_CCR6_Msk /*!<Capture/Compare 6 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG_Pos (0U) +#define TIM_BDTR_DTG_Msk (0xFFUL << TIM_BDTR_DTG_Pos) /*!< 0x000000FF */ +#define TIM_BDTR_DTG TIM_BDTR_DTG_Msk /*!<DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 (0x01U << TIM_BDTR_DTG_Pos) /*!< 0x00000001 */ +#define TIM_BDTR_DTG_1 (0x02U << TIM_BDTR_DTG_Pos) /*!< 0x00000002 */ +#define TIM_BDTR_DTG_2 (0x04U << TIM_BDTR_DTG_Pos) /*!< 0x00000004 */ +#define TIM_BDTR_DTG_3 (0x08U << TIM_BDTR_DTG_Pos) /*!< 0x00000008 */ +#define TIM_BDTR_DTG_4 (0x10U << TIM_BDTR_DTG_Pos) /*!< 0x00000010 */ +#define TIM_BDTR_DTG_5 (0x20U << TIM_BDTR_DTG_Pos) /*!< 0x00000020 */ +#define TIM_BDTR_DTG_6 (0x40U << TIM_BDTR_DTG_Pos) /*!< 0x00000040 */ +#define TIM_BDTR_DTG_7 (0x80U << TIM_BDTR_DTG_Pos) /*!< 0x00000080 */ + +#define TIM_BDTR_LOCK_Pos (8U) +#define TIM_BDTR_LOCK_Msk (0x3UL << TIM_BDTR_LOCK_Pos) /*!< 0x00000300 */ +#define TIM_BDTR_LOCK TIM_BDTR_LOCK_Msk /*!<LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 (0x1U << TIM_BDTR_LOCK_Pos) /*!< 0x00000100 */ +#define TIM_BDTR_LOCK_1 (0x2U << TIM_BDTR_LOCK_Pos) /*!< 0x00000200 */ + +#define TIM_BDTR_OSSI_Pos (10U) +#define TIM_BDTR_OSSI_Msk (0x1UL << TIM_BDTR_OSSI_Pos) /*!< 0x00000400 */ +#define TIM_BDTR_OSSI TIM_BDTR_OSSI_Msk /*!<Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR_Pos (11U) +#define TIM_BDTR_OSSR_Msk (0x1UL << TIM_BDTR_OSSR_Pos) /*!< 0x00000800 */ +#define TIM_BDTR_OSSR TIM_BDTR_OSSR_Msk /*!<Off-State Selection for Run mode */ +#define TIM_BDTR_BKE_Pos (12U) +#define TIM_BDTR_BKE_Msk (0x1UL << TIM_BDTR_BKE_Pos) /*!< 0x00001000 */ +#define TIM_BDTR_BKE TIM_BDTR_BKE_Msk /*!<Break enable for Break 1 */ +#define TIM_BDTR_BKP_Pos (13U) +#define TIM_BDTR_BKP_Msk (0x1UL << TIM_BDTR_BKP_Pos) /*!< 0x00002000 */ +#define TIM_BDTR_BKP TIM_BDTR_BKP_Msk /*!<Break Polarity for Break 1 */ +#define TIM_BDTR_AOE_Pos (14U) +#define TIM_BDTR_AOE_Msk (0x1UL << TIM_BDTR_AOE_Pos) /*!< 0x00004000 */ +#define TIM_BDTR_AOE TIM_BDTR_AOE_Msk /*!<Automatic Output enable */ +#define TIM_BDTR_MOE_Pos (15U) +#define TIM_BDTR_MOE_Msk (0x1UL << TIM_BDTR_MOE_Pos) /*!< 0x00008000 */ +#define TIM_BDTR_MOE TIM_BDTR_MOE_Msk /*!<Main Output enable */ + +#define TIM_BDTR_BKF_Pos (16U) +#define TIM_BDTR_BKF_Msk (0xFUL << TIM_BDTR_BKF_Pos) /*!< 0x000F0000 */ +#define TIM_BDTR_BKF TIM_BDTR_BKF_Msk /*!<Break Filter for Break 1 */ +#define TIM_BDTR_BK2F_Pos (20U) +#define TIM_BDTR_BK2F_Msk (0xFUL << TIM_BDTR_BK2F_Pos) /*!< 0x00F00000 */ +#define TIM_BDTR_BK2F TIM_BDTR_BK2F_Msk /*!<Break Filter for Break 2 */ + +#define TIM_BDTR_BK2E_Pos (24U) +#define TIM_BDTR_BK2E_Msk (0x1UL << TIM_BDTR_BK2E_Pos) /*!< 0x01000000 */ +#define TIM_BDTR_BK2E TIM_BDTR_BK2E_Msk /*!<Break enable for Break 2 */ +#define TIM_BDTR_BK2P_Pos (25U) +#define TIM_BDTR_BK2P_Msk (0x1UL << TIM_BDTR_BK2P_Pos) /*!< 0x02000000 */ +#define TIM_BDTR_BK2P TIM_BDTR_BK2P_Msk /*!<Break Polarity for Break 2 */ + +#define TIM_BDTR_BKDSRM_Pos (26U) +#define TIM_BDTR_BKDSRM_Msk (0x1UL << TIM_BDTR_BKDSRM_Pos) /*!< 0x04000000 */ +#define TIM_BDTR_BKDSRM TIM_BDTR_BKDSRM_Msk /*!<Break disarming/re-arming */ +#define TIM_BDTR_BK2DSRM_Pos (27U) +#define TIM_BDTR_BK2DSRM_Msk (0x1UL << TIM_BDTR_BK2DSRM_Pos) /*!< 0x08000000 */ +#define TIM_BDTR_BK2DSRM TIM_BDTR_BK2DSRM_Msk /*!<Break2 disarming/re-arming */ + +#define TIM_BDTR_BKBID_Pos (28U) +#define TIM_BDTR_BKBID_Msk (0x1UL << TIM_BDTR_BKBID_Pos) /*!< 0x10000000 */ +#define TIM_BDTR_BKBID TIM_BDTR_BKBID_Msk /*!<Break BIDirectional */ +#define TIM_BDTR_BK2BID_Pos (29U) +#define TIM_BDTR_BK2BID_Msk (0x1UL << TIM_BDTR_BK2BID_Pos) /*!< 0x20000000 */ +#define TIM_BDTR_BK2BID TIM_BDTR_BK2BID_Msk /*!<Break2 BIDirectional */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA_Pos (0U) +#define TIM_DCR_DBA_Msk (0x1FUL << TIM_DCR_DBA_Pos) /*!< 0x0000001F */ +#define TIM_DCR_DBA TIM_DCR_DBA_Msk /*!<DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 (0x01U << TIM_DCR_DBA_Pos) /*!< 0x00000001 */ +#define TIM_DCR_DBA_1 (0x02U << TIM_DCR_DBA_Pos) /*!< 0x00000002 */ +#define TIM_DCR_DBA_2 (0x04U << TIM_DCR_DBA_Pos) /*!< 0x00000004 */ +#define TIM_DCR_DBA_3 (0x08U << TIM_DCR_DBA_Pos) /*!< 0x00000008 */ +#define TIM_DCR_DBA_4 (0x10U << TIM_DCR_DBA_Pos) /*!< 0x00000010 */ + +#define TIM_DCR_DBL_Pos (8U) +#define TIM_DCR_DBL_Msk (0x1FUL << TIM_DCR_DBL_Pos) /*!< 0x00001F00 */ +#define TIM_DCR_DBL TIM_DCR_DBL_Msk /*!<DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 (0x01U << TIM_DCR_DBL_Pos) /*!< 0x00000100 */ +#define TIM_DCR_DBL_1 (0x02U << TIM_DCR_DBL_Pos) /*!< 0x00000200 */ +#define TIM_DCR_DBL_2 (0x04U << TIM_DCR_DBL_Pos) /*!< 0x00000400 */ +#define TIM_DCR_DBL_3 (0x08U << TIM_DCR_DBL_Pos) /*!< 0x00000800 */ +#define TIM_DCR_DBL_4 (0x10U << TIM_DCR_DBL_Pos) /*!< 0x00001000 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB_Pos (0U) +#define TIM_DMAR_DMAB_Msk (0xFFFFUL << TIM_DMAR_DMAB_Pos) /*!< 0x0000FFFF */ +#define TIM_DMAR_DMAB TIM_DMAR_DMAB_Msk /*!<DMA register for burst accesses */ + +/******************* Bit definition for TIM1_OR register *******************/ +#define TIM1_OR_ETR_ADC1_RMP_Pos (0U) +#define TIM1_OR_ETR_ADC1_RMP_Msk (0x3UL << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000003 */ +#define TIM1_OR_ETR_ADC1_RMP TIM1_OR_ETR_ADC1_RMP_Msk /*!< TIM1_ETR_ADC1 remapping capability*/ +#define TIM1_OR_ETR_ADC1_RMP_0 (0x1U << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000001 */ +#define TIM1_OR_ETR_ADC1_RMP_1 (0x2U << TIM1_OR_ETR_ADC1_RMP_Pos) /*!< 0x00000002 */ +#define TIM1_OR_TI1_RMP_Pos (4U) +#define TIM1_OR_TI1_RMP_Msk (0x1UL << TIM1_OR_TI1_RMP_Pos) /*!< 0x00000010 */ +#define TIM1_OR_TI1_RMP TIM1_OR_TI1_RMP_Msk /*!< Input Capture 1 remap*/ + +/******************* Bit definition for TIM2_OR register *******************/ +#define TIM2_OR_TI4_RMP_Pos (2U) +#define TIM2_OR_TI4_RMP_Msk (0x3UL << TIM2_OR_TI4_RMP_Pos) /*!< 0x0000000C */ +#define TIM2_OR_TI4_RMP TIM2_OR_TI4_RMP_Msk /*!< TI4 Input capture 4 remap*/ +#define TIM2_OR_TI4_RMP_0 (0x1U << TIM2_OR_TI4_RMP_Pos) /*!< 0x00000004 */ +#define TIM2_OR_ETR_RMP_Pos (1U) +#define TIM2_OR_ETR_RMP_Msk (0x1UL << TIM2_OR_ETR_RMP_Pos) /*!< 0x00000002 */ +#define TIM2_OR_ETR_RMP TIM2_OR_ETR_RMP_Msk /*!< External trigger remap*/ + +/******************* Bit definition for TIM1_AF1 register *******************/ +#define TIM1_AF1_BKINE_Pos (0U) +#define TIM1_AF1_BKINE_Msk (0x1UL << TIM1_AF1_BKINE_Pos) /*!< 0x00000001 */ +#define TIM1_AF1_BKINE TIM1_AF1_BKINE_Msk /*!<BRK BKIN input enable */ +#define TIM1_AF1_BKCMP1E_Pos (1U) +#define TIM1_AF1_BKCMP1E_Msk (0x1UL << TIM1_AF1_BKCMP1E_Pos) /*!< 0x00000002 */ +#define TIM1_AF1_BKCMP1E TIM1_AF1_BKCMP1E_Msk /*!<BRK COMP1 enable */ +#define TIM1_AF1_BKINP_Pos (9U) +#define TIM1_AF1_BKINP_Msk (0x1UL << TIM1_AF1_BKINP_Pos) /*!< 0x00000200 */ +#define TIM1_AF1_BKINP TIM1_AF1_BKINP_Msk /*!<BRK BKIN input polarity */ +#define TIM1_AF1_BKCMP1P_Pos (10U) +#define TIM1_AF1_BKCMP1P_Msk (0x1UL << TIM1_AF1_BKCMP1P_Pos) /*!< 0x00000400 */ +#define TIM1_AF1_BKCMP1P TIM1_AF1_BKCMP1P_Msk /*!<BRK COMP1 input polarity */ +#define TIM1_AF1_ETRSEL_Pos (14U) +#define TIM1_AF1_ETRSEL_Msk (0x7UL << TIM1_AF1_ETRSEL_Pos) /*!< 0x0001C000 */ +#define TIM1_AF1_ETRSEL TIM1_AF1_ETRSEL_Msk /*!<ETRSEL[2:0] bits (TIM1 ETR source selection) */ +#define TIM1_AF1_ETRSEL_0 (0x1U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00004000 */ +#define TIM1_AF1_ETRSEL_1 (0x2U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00008000 */ +#define TIM1_AF1_ETRSEL_2 (0x4U << TIM1_AF1_ETRSEL_Pos) /*!< 0x00010000 */ + +/******************* Bit definition for TIM2_AF1 register *******************/ +#define TIM2_AF1_ETRSEL_Pos (14U) +#define TIM2_AF1_ETRSEL_Msk (0x7UL << TIM2_AF1_ETRSEL_Pos) /*!< 0x0001C000 */ +#define TIM2_AF1_ETRSEL (0x00001C000) /*!< External trigger source selection */ +#define TIM2_AF1_ETRSEL_0 (0x000004000) /*!< Bit_0 */ +#define TIM2_AF1_ETRSEL_1 (0x000008000) /*!< Bit_1 */ +#define TIM2_AF1_ETRSEL_2 (0x000010000) /*!< Bit_2 */ + +/******************* Bit definition for TIM17_AF1 register *******************/ +#define TIM17_AF1_BKINE_Pos (0U) +#define TIM17_AF1_BKINE_Msk (0x1UL << TIM17_AF1_BKINE_Pos) /*!< 0x00000001 */ +#define TIM17_AF1_BKINE TIM17_AF1_BKINE_Msk /*!<BRK BKIN input enable */ +#define TIM17_AF1_BKINP_Pos (9U) +#define TIM17_AF1_BKINP_Msk (0x1UL << TIM17_AF1_BKINP_Pos) /*!< 0x00000200 */ +#define TIM17_AF1_BKINP TIM17_AF1_BKINP_Msk /*!<BRK BKIN2 input polarity */ + +/******************* Bit definition for TIM1_AF2 register *******************/ +#define TIM1_AF2_BK2INE_Pos (0U) +#define TIM1_AF2_BK2INE_Msk (0x1UL << TIM1_AF2_BK2INE_Pos) /*!< 0x00000001 */ +#define TIM1_AF2_BK2INE TIM1_AF2_BK2INE_Msk /*!<BRK2 BKIN2 input enable */ +#define TIM1_AF2_BK2CMP1E_Pos (1U) +#define TIM1_AF2_BK2CMP1E_Msk (0x1UL << TIM1_AF2_BK2CMP1E_Pos) /*!< 0x00000002 */ +#define TIM1_AF2_BK2CMP1E TIM1_AF2_BK2CMP1E_Msk /*!<BRK2 COMP1 enable */ +#define TIM1_AF2_BK2INP_Pos (9U) +#define TIM1_AF2_BK2INP_Msk (0x1UL << TIM1_AF2_BK2INP_Pos) /*!< 0x00000200 */ +#define TIM1_AF2_BK2INP TIM1_AF2_BK2INP_Msk /*!<BRK2 BKIN2 input polarity */ +#define TIM1_AF2_BK2CMP1P_Pos (10U) +#define TIM1_AF2_BK2CMP1P_Msk (0x1UL << TIM1_AF2_BK2CMP1P_Pos) /*!< 0x00000400 */ +#define TIM1_AF2_BK2CMP1P TIM1_AF2_BK2CMP1P_Msk /*!<BRK2 COMP1 input polarity */ + +/******************************************************************************/ +/* */ +/* Low Power Timer (LPTIM) */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for LPTIM_ISR register *******************/ +#define LPTIM_ISR_CMPM_Pos (0U) +#define LPTIM_ISR_CMPM_Msk (0x1UL << LPTIM_ISR_CMPM_Pos) /*!< 0x00000001 */ +#define LPTIM_ISR_CMPM LPTIM_ISR_CMPM_Msk /*!< Compare match */ +#define LPTIM_ISR_ARRM_Pos (1U) +#define LPTIM_ISR_ARRM_Msk (0x1UL << LPTIM_ISR_ARRM_Pos) /*!< 0x00000002 */ +#define LPTIM_ISR_ARRM LPTIM_ISR_ARRM_Msk /*!< Autoreload match */ +#define LPTIM_ISR_EXTTRIG_Pos (2U) +#define LPTIM_ISR_EXTTRIG_Msk (0x1UL << LPTIM_ISR_EXTTRIG_Pos) /*!< 0x00000004 */ +#define LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG_Msk /*!< External trigger edge event */ +#define LPTIM_ISR_CMPOK_Pos (3U) +#define LPTIM_ISR_CMPOK_Msk (0x1UL << LPTIM_ISR_CMPOK_Pos) /*!< 0x00000008 */ +#define LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK_Msk /*!< Compare register update OK */ +#define LPTIM_ISR_ARROK_Pos (4U) +#define LPTIM_ISR_ARROK_Msk (0x1UL << LPTIM_ISR_ARROK_Pos) /*!< 0x00000010 */ +#define LPTIM_ISR_ARROK LPTIM_ISR_ARROK_Msk /*!< Autoreload register update OK */ +#define LPTIM_ISR_UP_Pos (5U) +#define LPTIM_ISR_UP_Msk (0x1UL << LPTIM_ISR_UP_Pos) /*!< 0x00000020 */ +#define LPTIM_ISR_UP LPTIM_ISR_UP_Msk /*!< Counter direction change down to up */ +#define LPTIM_ISR_DOWN_Pos (6U) +#define LPTIM_ISR_DOWN_Msk (0x1UL << LPTIM_ISR_DOWN_Pos) /*!< 0x00000040 */ +#define LPTIM_ISR_DOWN LPTIM_ISR_DOWN_Msk /*!< Counter direction change up to down */ + +/****************** Bit definition for LPTIM_ICR register *******************/ +#define LPTIM_ICR_CMPMCF_Pos (0U) +#define LPTIM_ICR_CMPMCF_Msk (0x1UL << LPTIM_ICR_CMPMCF_Pos) /*!< 0x00000001 */ +#define LPTIM_ICR_CMPMCF LPTIM_ICR_CMPMCF_Msk /*!< Compare match Clear Flag */ +#define LPTIM_ICR_ARRMCF_Pos (1U) +#define LPTIM_ICR_ARRMCF_Msk (0x1UL << LPTIM_ICR_ARRMCF_Pos) /*!< 0x00000002 */ +#define LPTIM_ICR_ARRMCF LPTIM_ICR_ARRMCF_Msk /*!< Autoreload match Clear Flag */ +#define LPTIM_ICR_EXTTRIGCF_Pos (2U) +#define LPTIM_ICR_EXTTRIGCF_Msk (0x1UL << LPTIM_ICR_EXTTRIGCF_Pos) /*!< 0x00000004 */ +#define LPTIM_ICR_EXTTRIGCF LPTIM_ICR_EXTTRIGCF_Msk /*!< External trigger edge event Clear Flag */ +#define LPTIM_ICR_CMPOKCF_Pos (3U) +#define LPTIM_ICR_CMPOKCF_Msk (0x1UL << LPTIM_ICR_CMPOKCF_Pos) /*!< 0x00000008 */ +#define LPTIM_ICR_CMPOKCF LPTIM_ICR_CMPOKCF_Msk /*!< Compare register update OK Clear Flag */ +#define LPTIM_ICR_ARROKCF_Pos (4U) +#define LPTIM_ICR_ARROKCF_Msk (0x1UL << LPTIM_ICR_ARROKCF_Pos) /*!< 0x00000010 */ +#define LPTIM_ICR_ARROKCF LPTIM_ICR_ARROKCF_Msk /*!< Autoreload register update OK Clear Flag */ +#define LPTIM_ICR_UPCF_Pos (5U) +#define LPTIM_ICR_UPCF_Msk (0x1UL << LPTIM_ICR_UPCF_Pos) /*!< 0x00000020 */ +#define LPTIM_ICR_UPCF LPTIM_ICR_UPCF_Msk /*!< Counter direction change down to up Clear Flag */ +#define LPTIM_ICR_DOWNCF_Pos (6U) +#define LPTIM_ICR_DOWNCF_Msk (0x1UL << LPTIM_ICR_DOWNCF_Pos) /*!< 0x00000040 */ +#define LPTIM_ICR_DOWNCF LPTIM_ICR_DOWNCF_Msk /*!< Counter direction change up to down Clear Flag */ + +/****************** Bit definition for LPTIM_IER register ********************/ +#define LPTIM_IER_CMPMIE_Pos (0U) +#define LPTIM_IER_CMPMIE_Msk (0x1UL << LPTIM_IER_CMPMIE_Pos) /*!< 0x00000001 */ +#define LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE_Msk /*!< Compare match Interrupt Enable */ +#define LPTIM_IER_ARRMIE_Pos (1U) +#define LPTIM_IER_ARRMIE_Msk (0x1UL << LPTIM_IER_ARRMIE_Pos) /*!< 0x00000002 */ +#define LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE_Msk /*!< Autoreload match Interrupt Enable */ +#define LPTIM_IER_EXTTRIGIE_Pos (2U) +#define LPTIM_IER_EXTTRIGIE_Msk (0x1UL << LPTIM_IER_EXTTRIGIE_Pos) /*!< 0x00000004 */ +#define LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE_Msk /*!< External trigger edge event Interrupt Enable */ +#define LPTIM_IER_CMPOKIE_Pos (3U) +#define LPTIM_IER_CMPOKIE_Msk (0x1UL << LPTIM_IER_CMPOKIE_Pos) /*!< 0x00000008 */ +#define LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE_Msk /*!< Compare register update OK Interrupt Enable */ +#define LPTIM_IER_ARROKIE_Pos (4U) +#define LPTIM_IER_ARROKIE_Msk (0x1UL << LPTIM_IER_ARROKIE_Pos) /*!< 0x00000010 */ +#define LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE_Msk /*!< Autoreload register update OK Interrupt Enable */ +#define LPTIM_IER_UPIE_Pos (5U) +#define LPTIM_IER_UPIE_Msk (0x1UL << LPTIM_IER_UPIE_Pos) /*!< 0x00000020 */ +#define LPTIM_IER_UPIE LPTIM_IER_UPIE_Msk /*!< Counter direction change down to up Interrupt Enable */ +#define LPTIM_IER_DOWNIE_Pos (6U) +#define LPTIM_IER_DOWNIE_Msk (0x1UL << LPTIM_IER_DOWNIE_Pos) /*!< 0x00000040 */ +#define LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE_Msk /*!< Counter direction change up to down Interrupt Enable */ + +/****************** Bit definition for LPTIM_CFGR register *******************/ +#define LPTIM_CFGR_CKSEL_Pos (0U) +#define LPTIM_CFGR_CKSEL_Msk (0x1UL << LPTIM_CFGR_CKSEL_Pos) /*!< 0x00000001 */ +#define LPTIM_CFGR_CKSEL LPTIM_CFGR_CKSEL_Msk /*!< Clock selector */ + +#define LPTIM_CFGR_CKPOL_Pos (1U) +#define LPTIM_CFGR_CKPOL_Msk (0x3UL << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000006 */ +#define LPTIM_CFGR_CKPOL LPTIM_CFGR_CKPOL_Msk /*!< CKPOL[1:0] bits (Clock polarity) */ +#define LPTIM_CFGR_CKPOL_0 (0x1U << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000002 */ +#define LPTIM_CFGR_CKPOL_1 (0x2U << LPTIM_CFGR_CKPOL_Pos) /*!< 0x00000004 */ + +#define LPTIM_CFGR_CKFLT_Pos (3U) +#define LPTIM_CFGR_CKFLT_Msk (0x3UL << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000018 */ +#define LPTIM_CFGR_CKFLT LPTIM_CFGR_CKFLT_Msk /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */ +#define LPTIM_CFGR_CKFLT_0 (0x1U << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000008 */ +#define LPTIM_CFGR_CKFLT_1 (0x2U << LPTIM_CFGR_CKFLT_Pos) /*!< 0x00000010 */ + +#define LPTIM_CFGR_TRGFLT_Pos (6U) +#define LPTIM_CFGR_TRGFLT_Msk (0x3UL << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x000000C0 */ +#define LPTIM_CFGR_TRGFLT LPTIM_CFGR_TRGFLT_Msk /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */ +#define LPTIM_CFGR_TRGFLT_0 (0x1U << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000040 */ +#define LPTIM_CFGR_TRGFLT_1 (0x2U << LPTIM_CFGR_TRGFLT_Pos) /*!< 0x00000080 */ + +#define LPTIM_CFGR_PRESC_Pos (9U) +#define LPTIM_CFGR_PRESC_Msk (0x7UL << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000E00 */ +#define LPTIM_CFGR_PRESC LPTIM_CFGR_PRESC_Msk /*!< PRESC[2:0] bits (Clock prescaler) */ +#define LPTIM_CFGR_PRESC_0 (0x1U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000200 */ +#define LPTIM_CFGR_PRESC_1 (0x2U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000400 */ +#define LPTIM_CFGR_PRESC_2 (0x4U << LPTIM_CFGR_PRESC_Pos) /*!< 0x00000800 */ + +#define LPTIM_CFGR_TRIGSEL_Pos (13U) +#define LPTIM_CFGR_TRIGSEL_Msk (0x7UL << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x0000E000 */ +#define LPTIM_CFGR_TRIGSEL LPTIM_CFGR_TRIGSEL_Msk /*!< TRIGSEL[2:0]] bits (Trigger selector) */ +#define LPTIM_CFGR_TRIGSEL_0 (0x1U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00002000 */ +#define LPTIM_CFGR_TRIGSEL_1 (0x2U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00004000 */ +#define LPTIM_CFGR_TRIGSEL_2 (0x4U << LPTIM_CFGR_TRIGSEL_Pos) /*!< 0x00008000 */ + +#define LPTIM_CFGR_TRIGEN_Pos (17U) +#define LPTIM_CFGR_TRIGEN_Msk (0x3UL << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00060000 */ +#define LPTIM_CFGR_TRIGEN LPTIM_CFGR_TRIGEN_Msk /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */ +#define LPTIM_CFGR_TRIGEN_0 (0x1U << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00020000 */ +#define LPTIM_CFGR_TRIGEN_1 (0x2U << LPTIM_CFGR_TRIGEN_Pos) /*!< 0x00040000 */ + +#define LPTIM_CFGR_TIMOUT_Pos (19U) +#define LPTIM_CFGR_TIMOUT_Msk (0x1UL << LPTIM_CFGR_TIMOUT_Pos) /*!< 0x00080000 */ +#define LPTIM_CFGR_TIMOUT LPTIM_CFGR_TIMOUT_Msk /*!< Timeout enable */ +#define LPTIM_CFGR_WAVE_Pos (20U) +#define LPTIM_CFGR_WAVE_Msk (0x1UL << LPTIM_CFGR_WAVE_Pos) /*!< 0x00100000 */ +#define LPTIM_CFGR_WAVE LPTIM_CFGR_WAVE_Msk /*!< Waveform shape */ +#define LPTIM_CFGR_WAVPOL_Pos (21U) +#define LPTIM_CFGR_WAVPOL_Msk (0x1UL << LPTIM_CFGR_WAVPOL_Pos) /*!< 0x00200000 */ +#define LPTIM_CFGR_WAVPOL LPTIM_CFGR_WAVPOL_Msk /*!< Waveform shape polarity */ +#define LPTIM_CFGR_PRELOAD_Pos (22U) +#define LPTIM_CFGR_PRELOAD_Msk (0x1UL << LPTIM_CFGR_PRELOAD_Pos) /*!< 0x00400000 */ +#define LPTIM_CFGR_PRELOAD LPTIM_CFGR_PRELOAD_Msk /*!< Reg update mode */ +#define LPTIM_CFGR_COUNTMODE_Pos (23U) +#define LPTIM_CFGR_COUNTMODE_Msk (0x1UL << LPTIM_CFGR_COUNTMODE_Pos) /*!< 0x00800000 */ +#define LPTIM_CFGR_COUNTMODE LPTIM_CFGR_COUNTMODE_Msk /*!< Counter mode enable */ +#define LPTIM_CFGR_ENC_Pos (24U) +#define LPTIM_CFGR_ENC_Msk (0x1UL << LPTIM_CFGR_ENC_Pos) /*!< 0x01000000 */ +#define LPTIM_CFGR_ENC LPTIM_CFGR_ENC_Msk /*!< Encoder mode enable */ + +/****************** Bit definition for LPTIM_CR register ********************/ +#define LPTIM_CR_ENABLE_Pos (0U) +#define LPTIM_CR_ENABLE_Msk (0x1UL << LPTIM_CR_ENABLE_Pos) /*!< 0x00000001 */ +#define LPTIM_CR_ENABLE LPTIM_CR_ENABLE_Msk /*!< LPTIMer enable */ +#define LPTIM_CR_SNGSTRT_Pos (1U) +#define LPTIM_CR_SNGSTRT_Msk (0x1UL << LPTIM_CR_SNGSTRT_Pos) /*!< 0x00000002 */ +#define LPTIM_CR_SNGSTRT LPTIM_CR_SNGSTRT_Msk /*!< Timer start in single mode */ +#define LPTIM_CR_CNTSTRT_Pos (2U) +#define LPTIM_CR_CNTSTRT_Msk (0x1UL << LPTIM_CR_CNTSTRT_Pos) /*!< 0x00000004 */ +#define LPTIM_CR_CNTSTRT LPTIM_CR_CNTSTRT_Msk /*!< Timer start in continuous mode */ +#define LPTIM_CR_COUNTRST_Pos (3U) +#define LPTIM_CR_COUNTRST_Msk (0x1UL << LPTIM_CR_COUNTRST_Pos) /*!< 0x00000008 */ +#define LPTIM_CR_COUNTRST LPTIM_CR_COUNTRST_Msk /*!< Counter reset */ +#define LPTIM_CR_RSTARE_Pos (4U) +#define LPTIM_CR_RSTARE_Msk (0x1UL << LPTIM_CR_RSTARE_Pos) /*!< 0x00000010 */ +#define LPTIM_CR_RSTARE LPTIM_CR_RSTARE_Msk /*!< Reset after read enable */ + +/****************** Bit definition for LPTIM_CMP register *******************/ +#define LPTIM_CMP_CMP_Pos (0U) +#define LPTIM_CMP_CMP_Msk (0xFFFFUL << LPTIM_CMP_CMP_Pos) /*!< 0x0000FFFF */ +#define LPTIM_CMP_CMP LPTIM_CMP_CMP_Msk /*!< Compare register */ + +/****************** Bit definition for LPTIM_ARR register *******************/ +#define LPTIM_ARR_ARR_Pos (0U) +#define LPTIM_ARR_ARR_Msk (0xFFFFUL << LPTIM_ARR_ARR_Pos) /*!< 0x0000FFFF */ +#define LPTIM_ARR_ARR LPTIM_ARR_ARR_Msk /*!< Auto reload register */ + +/****************** Bit definition for LPTIM_CNT register *******************/ +#define LPTIM_CNT_CNT_Pos (0U) +#define LPTIM_CNT_CNT_Msk (0xFFFFUL << LPTIM_CNT_CNT_Pos) /*!< 0x0000FFFF */ +#define LPTIM_CNT_CNT LPTIM_CNT_CNT_Msk /*!< Counter register */ + +/****************** Bit definition for LPTIM_OR register *******************/ +#define LPTIM_OR_OR_Pos (0U) +#define LPTIM_OR_OR_Msk (0x1UL << LPTIM_OR_OR_Pos) /*!< 0x00000001 */ +#define LPTIM_OR_OR LPTIM_OR_OR_Msk /*!< OR[1:0] bits (Remap selection) */ +#define LPTIM_OR_OR_0 (0x1U << LPTIM_OR_OR_Pos) /*!< 0x00000001 */ + +/******************************************************************************/ +/* */ +/* Inter-Processor Communication Controller (IPCC) */ +/* */ +/******************************************************************************/ + +/********************** Bit definition for IPCC_C1CR register ***************/ +#define IPCC_C1CR_RXOIE_Pos (0U) +#define IPCC_C1CR_RXOIE_Msk (0x1UL << IPCC_C1CR_RXOIE_Pos) /*!< 0x00000001 */ +#define IPCC_C1CR_RXOIE IPCC_C1CR_RXOIE_Msk /*!< Processor M4 Receive channel occupied interrupt enable */ +#define IPCC_C1CR_TXFIE_Pos (16U) +#define IPCC_C1CR_TXFIE_Msk (0x1UL << IPCC_C1CR_TXFIE_Pos) /*!< 0x00010000 */ +#define IPCC_C1CR_TXFIE IPCC_C1CR_TXFIE_Msk /*!< Processor M4 Transmit channel free interrupt enable */ + +/********************** Bit definition for IPCC_C1MR register **************/ +#define IPCC_C1MR_CH1OM_Pos (0U) +#define IPCC_C1MR_CH1OM_Msk (0x1UL << IPCC_C1MR_CH1OM_Pos) /*!< 0x00000001 */ +#define IPCC_C1MR_CH1OM IPCC_C1MR_CH1OM_Msk /*!< M4 Channel1 occupied interrupt mask */ +#define IPCC_C1MR_CH2OM_Pos (1U) +#define IPCC_C1MR_CH2OM_Msk (0x1UL << IPCC_C1MR_CH2OM_Pos) /*!< 0x00000002 */ +#define IPCC_C1MR_CH2OM IPCC_C1MR_CH2OM_Msk /*!< M4 Channel2 occupied interrupt mask */ +#define IPCC_C1MR_CH3OM_Pos (2U) +#define IPCC_C1MR_CH3OM_Msk (0x1UL << IPCC_C1MR_CH3OM_Pos) /*!< 0x00000004 */ +#define IPCC_C1MR_CH3OM IPCC_C1MR_CH3OM_Msk /*!< M4 Channel3 occupied interrupt mask */ +#define IPCC_C1MR_CH4OM_Pos (3U) +#define IPCC_C1MR_CH4OM_Msk (0x1UL << IPCC_C1MR_CH4OM_Pos) /*!< 0x00000008 */ +#define IPCC_C1MR_CH4OM IPCC_C1MR_CH4OM_Msk /*!< M4 Channel4 occupied interrupt mask */ +#define IPCC_C1MR_CH5OM_Pos (4U) +#define IPCC_C1MR_CH5OM_Msk (0x1UL << IPCC_C1MR_CH5OM_Pos) /*!< 0x00000010 */ +#define IPCC_C1MR_CH5OM IPCC_C1MR_CH5OM_Msk /*!< M4 Channel5 occupied interrupt mask */ +#define IPCC_C1MR_CH6OM_Pos (5U) +#define IPCC_C1MR_CH6OM_Msk (0x1UL << IPCC_C1MR_CH6OM_Pos) /*!< 0x00000020 */ +#define IPCC_C1MR_CH6OM IPCC_C1MR_CH6OM_Msk /*!< M4 Channel6 occupied interrupt mask */ + +#define IPCC_C1MR_CH1FM_Pos (16U) +#define IPCC_C1MR_CH1FM_Msk (0x1UL << IPCC_C1MR_CH1FM_Pos) /*!< 0x00010000 */ +#define IPCC_C1MR_CH1FM IPCC_C1MR_CH1FM_Msk /*!< M4 Transmit Channel1 free interrupt mask */ +#define IPCC_C1MR_CH2FM_Pos (17U) +#define IPCC_C1MR_CH2FM_Msk (0x1UL << IPCC_C1MR_CH2FM_Pos) /*!< 0x00020000 */ +#define IPCC_C1MR_CH2FM IPCC_C1MR_CH2FM_Msk /*!< M4 Transmit Channel2 free interrupt mask */ +#define IPCC_C1MR_CH3FM_Pos (18U) +#define IPCC_C1MR_CH3FM_Msk (0x1UL << IPCC_C1MR_CH3FM_Pos) /*!< 0x00040000 */ +#define IPCC_C1MR_CH3FM IPCC_C1MR_CH3FM_Msk /*!< M4 Transmit Channel3 free interrupt mask */ +#define IPCC_C1MR_CH4FM_Pos (19U) +#define IPCC_C1MR_CH4FM_Msk (0x1UL << IPCC_C1MR_CH4FM_Pos) /*!< 0x00080000 */ +#define IPCC_C1MR_CH4FM IPCC_C1MR_CH4FM_Msk /*!< M4 Transmit Channel4 free interrupt mask */ +#define IPCC_C1MR_CH5FM_Pos (20U) +#define IPCC_C1MR_CH5FM_Msk (0x1UL << IPCC_C1MR_CH5FM_Pos) /*!< 0x00100000 */ +#define IPCC_C1MR_CH5FM IPCC_C1MR_CH5FM_Msk /*!< M4 Transmit Channel5 free interrupt mask */ +#define IPCC_C1MR_CH6FM_Pos (21U) +#define IPCC_C1MR_CH6FM_Msk (0x1UL << IPCC_C1MR_CH6FM_Pos) /*!< 0x00200000 */ +#define IPCC_C1MR_CH6FM IPCC_C1MR_CH6FM_Msk /*!< M4 Transmit Channel6 free interrupt mask */ + +/********************** Bit definition for IPCC_C1SCR register ***************/ +#define IPCC_C1SCR_CH1C_Pos (0U) +#define IPCC_C1SCR_CH1C_Msk (0x1UL << IPCC_C1SCR_CH1C_Pos) /*!< 0x00000001 */ +#define IPCC_C1SCR_CH1C IPCC_C1SCR_CH1C_Msk /*!< M4 receive Channel1 status clear */ +#define IPCC_C1SCR_CH2C_Pos (1U) +#define IPCC_C1SCR_CH2C_Msk (0x1UL << IPCC_C1SCR_CH2C_Pos) /*!< 0x00000002 */ +#define IPCC_C1SCR_CH2C IPCC_C1SCR_CH2C_Msk /*!< M4 receive Channel2 status clear */ +#define IPCC_C1SCR_CH3C_Pos (2U) +#define IPCC_C1SCR_CH3C_Msk (0x1UL << IPCC_C1SCR_CH3C_Pos) /*!< 0x00000004 */ +#define IPCC_C1SCR_CH3C IPCC_C1SCR_CH3C_Msk /*!< M4 receive Channel3 status clear */ +#define IPCC_C1SCR_CH4C_Pos (3U) +#define IPCC_C1SCR_CH4C_Msk (0x1UL << IPCC_C1SCR_CH4C_Pos) /*!< 0x00000008 */ +#define IPCC_C1SCR_CH4C IPCC_C1SCR_CH4C_Msk /*!< M4 receive Channel4 status clear */ +#define IPCC_C1SCR_CH5C_Pos (4U) +#define IPCC_C1SCR_CH5C_Msk (0x1UL << IPCC_C1SCR_CH5C_Pos) /*!< 0x00000010 */ +#define IPCC_C1SCR_CH5C IPCC_C1SCR_CH5C_Msk /*!< M4 receive Channel5 status clear */ +#define IPCC_C1SCR_CH6C_Pos (5U) +#define IPCC_C1SCR_CH6C_Msk (0x1UL << IPCC_C1SCR_CH6C_Pos) /*!< 0x00000020 */ +#define IPCC_C1SCR_CH6C IPCC_C1SCR_CH6C_Msk /*!< M4 receive Channel6 status clear */ + +#define IPCC_C1SCR_CH1S_Pos (16U) +#define IPCC_C1SCR_CH1S_Msk (0x1UL << IPCC_C1SCR_CH1S_Pos) /*!< 0x00010000 */ +#define IPCC_C1SCR_CH1S IPCC_C1SCR_CH1S_Msk /*!< M4 transmit Channel1 status set */ +#define IPCC_C1SCR_CH2S_Pos (17U) +#define IPCC_C1SCR_CH2S_Msk (0x1UL << IPCC_C1SCR_CH2S_Pos) /*!< 0x00020000 */ +#define IPCC_C1SCR_CH2S IPCC_C1SCR_CH2S_Msk /*!< M4 transmit Channel2 status set */ +#define IPCC_C1SCR_CH3S_Pos (18U) +#define IPCC_C1SCR_CH3S_Msk (0x1UL << IPCC_C1SCR_CH3S_Pos) /*!< 0x00040000 */ +#define IPCC_C1SCR_CH3S IPCC_C1SCR_CH3S_Msk /*!< M4 transmit Channel3 status set */ +#define IPCC_C1SCR_CH4S_Pos (19U) +#define IPCC_C1SCR_CH4S_Msk (0x1UL << IPCC_C1SCR_CH4S_Pos) /*!< 0x00080000 */ +#define IPCC_C1SCR_CH4S IPCC_C1SCR_CH4S_Msk /*!< M4 transmit Channel4 status set */ +#define IPCC_C1SCR_CH5S_Pos (20U) +#define IPCC_C1SCR_CH5S_Msk (0x1UL << IPCC_C1SCR_CH5S_Pos) /*!< 0x00100000 */ +#define IPCC_C1SCR_CH5S IPCC_C1SCR_CH5S_Msk /*!< M4 transmit Channel5 status set */ +#define IPCC_C1SCR_CH6S_Pos (21U) +#define IPCC_C1SCR_CH6S_Msk (0x1UL << IPCC_C1SCR_CH6S_Pos) /*!< 0x00200000 */ +#define IPCC_C1SCR_CH6S IPCC_C1SCR_CH6S_Msk /*!< M4 transmit Channel6 status set */ + +/********************** Bit definition for IPCC_C1TOC2SR register ***************/ +#define IPCC_C1TOC2SR_CH1F_Pos (0U) +#define IPCC_C1TOC2SR_CH1F_Msk (0x1UL << IPCC_C1TOC2SR_CH1F_Pos) /*!< 0x00000001 */ +#define IPCC_C1TOC2SR_CH1F IPCC_C1TOC2SR_CH1F_Msk /*!< M4 transmit to M4 receive Channel1 status flag before masking */ +#define IPCC_C1TOC2SR_CH2F_Pos (1U) +#define IPCC_C1TOC2SR_CH2F_Msk (0x1UL << IPCC_C1TOC2SR_CH2F_Pos) /*!< 0x00000002 */ +#define IPCC_C1TOC2SR_CH2F IPCC_C1TOC2SR_CH2F_Msk /*!< M4 transmit to M4 receive Channel2 status flag before masking */ +#define IPCC_C1TOC2SR_CH3F_Pos (2U) +#define IPCC_C1TOC2SR_CH3F_Msk (0x1UL << IPCC_C1TOC2SR_CH3F_Pos) /*!< 0x00000004 */ +#define IPCC_C1TOC2SR_CH3F IPCC_C1TOC2SR_CH3F_Msk /*!< M4 transmit to M4 receive Channel3 status flag before masking */ +#define IPCC_C1TOC2SR_CH4F_Pos (3U) +#define IPCC_C1TOC2SR_CH4F_Msk (0x1UL << IPCC_C1TOC2SR_CH4F_Pos) /*!< 0x00000008 */ +#define IPCC_C1TOC2SR_CH4F IPCC_C1TOC2SR_CH4F_Msk /*!< M4 transmit to M4 receive Channel4 status flag before masking */ +#define IPCC_C1TOC2SR_CH5F_Pos (4U) +#define IPCC_C1TOC2SR_CH5F_Msk (0x1UL << IPCC_C1TOC2SR_CH5F_Pos) /*!< 0x00000010 */ +#define IPCC_C1TOC2SR_CH5F IPCC_C1TOC2SR_CH5F_Msk /*!< M4 transmit to M4 receive Channel5 status flag before masking */ +#define IPCC_C1TOC2SR_CH6F_Pos (5U) +#define IPCC_C1TOC2SR_CH6F_Msk (0x1UL << IPCC_C1TOC2SR_CH6F_Pos) /*!< 0x00000020 */ +#define IPCC_C1TOC2SR_CH6F IPCC_C1TOC2SR_CH6F_Msk /*!< M4 transmit to M4 receive Channel6 status flag before masking */ + +/********************** Bit definition for IPCC_C2CR register ***************/ +#define IPCC_C2CR_RXOIE_Pos (0U) +#define IPCC_C2CR_RXOIE_Msk (0x1UL << IPCC_C2CR_RXOIE_Pos) /*!< 0x00000001 */ +#define IPCC_C2CR_RXOIE IPCC_C2CR_RXOIE_Msk /*!< Processor M0+ Receive channel occupied interrupt enable */ +#define IPCC_C2CR_TXFIE_Pos (16U) +#define IPCC_C2CR_TXFIE_Msk (0x1UL << IPCC_C2CR_TXFIE_Pos) /*!< 0x00010000 */ +#define IPCC_C2CR_TXFIE IPCC_C2CR_TXFIE_Msk /*!< Processor M0+ Transmit channel free interrupt enable */ + +/********************** Bit definition for IPCC_C2MR register ***************/ +#define IPCC_C2MR_CH1OM_Pos (0U) +#define IPCC_C2MR_CH1OM_Msk (0x1UL << IPCC_C2MR_CH1OM_Pos) /*!< 0x00000001 */ +#define IPCC_C2MR_CH1OM IPCC_C2MR_CH1OM_Msk /*!< M0+ Channel1 occupied interrupt mask */ +#define IPCC_C2MR_CH2OM_Pos (1U) +#define IPCC_C2MR_CH2OM_Msk (0x1UL << IPCC_C2MR_CH2OM_Pos) /*!< 0x00000002 */ +#define IPCC_C2MR_CH2OM IPCC_C2MR_CH2OM_Msk /*!< M0+ Channel2 occupied interrupt mask */ +#define IPCC_C2MR_CH3OM_Pos (2U) +#define IPCC_C2MR_CH3OM_Msk (0x1UL << IPCC_C2MR_CH3OM_Pos) /*!< 0x00000004 */ +#define IPCC_C2MR_CH3OM IPCC_C2MR_CH3OM_Msk /*!< M0+ Channel3 occupied interrupt mask */ +#define IPCC_C2MR_CH4OM_Pos (3U) +#define IPCC_C2MR_CH4OM_Msk (0x1UL << IPCC_C2MR_CH4OM_Pos) /*!< 0x00000008 */ +#define IPCC_C2MR_CH4OM IPCC_C2MR_CH4OM_Msk /*!< M0+ Channel4 occupied interrupt mask */ +#define IPCC_C2MR_CH5OM_Pos (4U) +#define IPCC_C2MR_CH5OM_Msk (0x1UL << IPCC_C2MR_CH5OM_Pos) /*!< 0x00000010 */ +#define IPCC_C2MR_CH5OM IPCC_C2MR_CH5OM_Msk /*!< M0+ Channel5 occupied interrupt mask */ +#define IPCC_C2MR_CH6OM_Pos (5U) +#define IPCC_C2MR_CH6OM_Msk (0x1UL << IPCC_C2MR_CH6OM_Pos) /*!< 0x00000020 */ +#define IPCC_C2MR_CH6OM IPCC_C2MR_CH6OM_Msk /*!< M0+ Channel6 occupied interrupt mask */ + +#define IPCC_C2MR_CH1FM_Pos (16U) +#define IPCC_C2MR_CH1FM_Msk (0x1UL << IPCC_C2MR_CH1FM_Pos) /*!< 0x00010000 */ +#define IPCC_C2MR_CH1FM IPCC_C2MR_CH1FM_Msk /*!< M0+ Transmit Channel1 free interrupt mask */ +#define IPCC_C2MR_CH2FM_Pos (17U) +#define IPCC_C2MR_CH2FM_Msk (0x1UL << IPCC_C2MR_CH2FM_Pos) /*!< 0x00020000 */ +#define IPCC_C2MR_CH2FM IPCC_C2MR_CH2FM_Msk /*!< M0+ Transmit Channel2 free interrupt mask */ +#define IPCC_C2MR_CH3FM_Pos (18U) +#define IPCC_C2MR_CH3FM_Msk (0x1UL << IPCC_C2MR_CH3FM_Pos) /*!< 0x00040000 */ +#define IPCC_C2MR_CH3FM IPCC_C2MR_CH3FM_Msk /*!< M0+ Transmit Channel3 free interrupt mask */ +#define IPCC_C2MR_CH4FM_Pos (19U) +#define IPCC_C2MR_CH4FM_Msk (0x1UL << IPCC_C2MR_CH4FM_Pos) /*!< 0x00080000 */ +#define IPCC_C2MR_CH4FM IPCC_C2MR_CH4FM_Msk /*!< M0+ Transmit Channel4 free interrupt mask */ +#define IPCC_C2MR_CH5FM_Pos (20U) +#define IPCC_C2MR_CH5FM_Msk (0x1UL << IPCC_C2MR_CH5FM_Pos) /*!< 0x00100000 */ +#define IPCC_C2MR_CH5FM IPCC_C2MR_CH5FM_Msk /*!< M0+ Transmit Channel5 free interrupt mask */ +#define IPCC_C2MR_CH6FM_Pos (21U) +#define IPCC_C2MR_CH6FM_Msk (0x1UL << IPCC_C2MR_CH6FM_Pos) /*!< 0x00200000 */ +#define IPCC_C2MR_CH6FM IPCC_C2MR_CH6FM_Msk /*!< M0+ Transmit Channel6 free interrupt mask */ + +/********************** Bit definition for IPCC_C2SCR register ***************/ +#define IPCC_C2SCR_CH1C_Pos (0U) +#define IPCC_C2SCR_CH1C_Msk (0x1UL << IPCC_C2SCR_CH1C_Pos) /*!< 0x00000001 */ +#define IPCC_C2SCR_CH1C IPCC_C2SCR_CH1C_Msk /*!< M0+ receive Channel1 status clear */ +#define IPCC_C2SCR_CH2C_Pos (1U) +#define IPCC_C2SCR_CH2C_Msk (0x1UL << IPCC_C2SCR_CH2C_Pos) /*!< 0x00000002 */ +#define IPCC_C2SCR_CH2C IPCC_C2SCR_CH2C_Msk /*!< M0+ receive Channel2 status clear */ +#define IPCC_C2SCR_CH3C_Pos (2U) +#define IPCC_C2SCR_CH3C_Msk (0x1UL << IPCC_C2SCR_CH3C_Pos) /*!< 0x00000004 */ +#define IPCC_C2SCR_CH3C IPCC_C2SCR_CH3C_Msk /*!< M0+ receive Channel3 status clear */ +#define IPCC_C2SCR_CH4C_Pos (3U) +#define IPCC_C2SCR_CH4C_Msk (0x1UL << IPCC_C2SCR_CH4C_Pos) /*!< 0x00000008 */ +#define IPCC_C2SCR_CH4C IPCC_C2SCR_CH4C_Msk /*!< M0+ receive Channel4 status clear */ +#define IPCC_C2SCR_CH5C_Pos (4U) +#define IPCC_C2SCR_CH5C_Msk (0x1UL << IPCC_C2SCR_CH5C_Pos) /*!< 0x00000010 */ +#define IPCC_C2SCR_CH5C IPCC_C2SCR_CH5C_Msk /*!< M0+ receive Channel5 status clear */ +#define IPCC_C2SCR_CH6C_Pos (5U) +#define IPCC_C2SCR_CH6C_Msk (0x1UL << IPCC_C2SCR_CH6C_Pos) /*!< 0x00000020 */ +#define IPCC_C2SCR_CH6C IPCC_C2SCR_CH6C_Msk /*!< M0+ receive Channel6 status clear */ + +#define IPCC_C2SCR_CH1S_Pos (16U) +#define IPCC_C2SCR_CH1S_Msk (0x1UL << IPCC_C2SCR_CH1S_Pos) /*!< 0x00010000 */ +#define IPCC_C2SCR_CH1S IPCC_C2SCR_CH1S_Msk /*!< M0+ transmit Channel1 status set */ +#define IPCC_C2SCR_CH2S_Pos (17U) +#define IPCC_C2SCR_CH2S_Msk (0x1UL << IPCC_C2SCR_CH2S_Pos) /*!< 0x00020000 */ +#define IPCC_C2SCR_CH2S IPCC_C2SCR_CH2S_Msk /*!< M0+ transmit Channel2 status set */ +#define IPCC_C2SCR_CH3S_Pos (18U) +#define IPCC_C2SCR_CH3S_Msk (0x1UL << IPCC_C2SCR_CH3S_Pos) /*!< 0x00040000 */ +#define IPCC_C2SCR_CH3S IPCC_C2SCR_CH3S_Msk /*!< M0+ transmit Channel3 status set */ +#define IPCC_C2SCR_CH4S_Pos (19U) +#define IPCC_C2SCR_CH4S_Msk (0x1UL << IPCC_C2SCR_CH4S_Pos) /*!< 0x00080000 */ +#define IPCC_C2SCR_CH4S IPCC_C2SCR_CH4S_Msk /*!< M0+ transmit Channel4 status set */ +#define IPCC_C2SCR_CH5S_Pos (20U) +#define IPCC_C2SCR_CH5S_Msk (0x1UL << IPCC_C2SCR_CH5S_Pos) /*!< 0x00100000 */ +#define IPCC_C2SCR_CH5S IPCC_C2SCR_CH5S_Msk /*!< M0+ transmit Channel5 status set */ +#define IPCC_C2SCR_CH6S_Pos (21U) +#define IPCC_C2SCR_CH6S_Msk (0x1UL << IPCC_C2SCR_CH6S_Pos) /*!< 0x00200000 */ +#define IPCC_C2SCR_CH6S IPCC_C2SCR_CH6S_Msk /*!< M0+ transmit Channel6 status set */ + +/********************** Bit definition for IPCC_C2TOC1SR register ***************/ +#define IPCC_C2TOC1SR_CH1F_Pos (0U) +#define IPCC_C2TOC1SR_CH1F_Msk (0x1UL << IPCC_C2TOC1SR_CH1F_Pos) /*!< 0x00000001 */ +#define IPCC_C2TOC1SR_CH1F IPCC_C2TOC1SR_CH1F_Msk /*!< M0+ transmit to M0 receive Channel1 status flag before masking */ +#define IPCC_C2TOC1SR_CH2F_Pos (1U) +#define IPCC_C2TOC1SR_CH2F_Msk (0x1UL << IPCC_C2TOC1SR_CH2F_Pos) /*!< 0x00000002 */ +#define IPCC_C2TOC1SR_CH2F IPCC_C2TOC1SR_CH2F_Msk /*!< M0+ transmit to M0 receive Channel2 status flag before masking */ +#define IPCC_C2TOC1SR_CH3F_Pos (2U) +#define IPCC_C2TOC1SR_CH3F_Msk (0x1UL << IPCC_C2TOC1SR_CH3F_Pos) /*!< 0x00000004 */ +#define IPCC_C2TOC1SR_CH3F IPCC_C2TOC1SR_CH3F_Msk /*!< M0+ transmit to M0 receive Channel3 status flag before masking */ +#define IPCC_C2TOC1SR_CH4F_Pos (3U) +#define IPCC_C2TOC1SR_CH4F_Msk (0x1UL << IPCC_C2TOC1SR_CH4F_Pos) /*!< 0x00000008 */ +#define IPCC_C2TOC1SR_CH4F IPCC_C2TOC1SR_CH4F_Msk /*!< M0+ transmit to M0 receive Channel4 status flag before masking */ +#define IPCC_C2TOC1SR_CH5F_Pos (4U) +#define IPCC_C2TOC1SR_CH5F_Msk (0x1UL << IPCC_C2TOC1SR_CH5F_Pos) /*!< 0x00000010 */ +#define IPCC_C2TOC1SR_CH5F IPCC_C2TOC1SR_CH5F_Msk /*!< M0+ transmit to M0 receive Channel5 status flag before masking */ +#define IPCC_C2TOC1SR_CH6F_Pos (5U) +#define IPCC_C2TOC1SR_CH6F_Msk (0x1UL << IPCC_C2TOC1SR_CH6F_Pos) /*!< 0x00000020 */ +#define IPCC_C2TOC1SR_CH6F IPCC_C2TOC1SR_CH6F_Msk /*!< M0+ transmit to M0 receive Channel6 status flag before masking */ + +/********************** Bit definition for IPCC_C1CR register ***************/ +#define IPCC_CR_RXOIE_Pos IPCC_C1CR_RXOIE_Pos +#define IPCC_CR_RXOIE_Msk IPCC_C1CR_RXOIE_Msk +#define IPCC_CR_RXOIE IPCC_C1CR_RXOIE +#define IPCC_CR_TXFIE_Pos IPCC_C1CR_TXFIE_Pos +#define IPCC_CR_TXFIE_Msk IPCC_C1CR_TXFIE_Msk +#define IPCC_CR_TXFIE IPCC_C1CR_TXFIE + +/********************** Bit definition for IPCC_C1MR register **************/ +#define IPCC_MR_CH1OM_Pos IPCC_C1MR_CH1OM_Pos +#define IPCC_MR_CH1OM_Msk IPCC_C1MR_CH1OM_Msk +#define IPCC_MR_CH1OM IPCC_C1MR_CH1OM +#define IPCC_MR_CH2OM_Pos IPCC_C1MR_CH2OM_Pos +#define IPCC_MR_CH2OM_Msk IPCC_C1MR_CH2OM_Msk +#define IPCC_MR_CH2OM IPCC_C1MR_CH2OM +#define IPCC_MR_CH3OM_Pos IPCC_C1MR_CH3OM_Pos +#define IPCC_MR_CH3OM_Msk IPCC_C1MR_CH3OM_Msk +#define IPCC_MR_CH3OM IPCC_C1MR_CH3OM +#define IPCC_MR_CH4OM_Pos IPCC_C1MR_CH4OM_Pos +#define IPCC_MR_CH4OM_Msk IPCC_C1MR_CH4OM_Msk +#define IPCC_MR_CH4OM IPCC_C1MR_CH4OM +#define IPCC_MR_CH5OM_Pos IPCC_C1MR_CH5OM_Pos +#define IPCC_MR_CH5OM_Msk IPCC_C1MR_CH5OM_Msk +#define IPCC_MR_CH5OM IPCC_C1MR_CH5OM +#define IPCC_MR_CH6OM_Pos IPCC_C1MR_CH6OM_Pos +#define IPCC_MR_CH6OM_Msk IPCC_C1MR_CH6OM_Msk +#define IPCC_MR_CH6OM IPCC_C1MR_CH6OM + +#define IPCC_MR_CH1FM_Pos IPCC_C1MR_CH1FM_Pos +#define IPCC_MR_CH1FM_Msk IPCC_C1MR_CH1FM_Msk +#define IPCC_MR_CH1FM IPCC_C1MR_CH1FM +#define IPCC_MR_CH2FM_Pos IPCC_C1MR_CH2FM_Pos +#define IPCC_MR_CH2FM_Msk IPCC_C1MR_CH2FM_Msk +#define IPCC_MR_CH2FM IPCC_C1MR_CH2FM +#define IPCC_MR_CH3FM_Pos IPCC_C1MR_CH3FM_Pos +#define IPCC_MR_CH3FM_Msk IPCC_C1MR_CH3FM_Msk +#define IPCC_MR_CH3FM IPCC_C1MR_CH3FM +#define IPCC_MR_CH4FM_Pos IPCC_C1MR_CH4FM_Pos +#define IPCC_MR_CH4FM_Msk IPCC_C1MR_CH4FM_Msk +#define IPCC_MR_CH4FM IPCC_C1MR_CH4FM +#define IPCC_MR_CH5FM_Pos IPCC_C1MR_CH5FM_Pos +#define IPCC_MR_CH5FM_Msk IPCC_C1MR_CH5FM_Msk +#define IPCC_MR_CH5FM IPCC_C1MR_CH5FM +#define IPCC_MR_CH6FM_Pos IPCC_C1MR_CH6FM_Pos +#define IPCC_MR_CH6FM_Msk IPCC_C1MR_CH6FM_Msk +#define IPCC_MR_CH6FM IPCC_C1MR_CH6FM + +/********************** Bit definition for IPCC_C1SCR register ***************/ +#define IPCC_SCR_CH1C_Pos IPCC_C1SCR_CH1C_Pos +#define IPCC_SCR_CH1C_Msk IPCC_C1SCR_CH1C_Msk +#define IPCC_SCR_CH1C IPCC_C1SCR_CH1C +#define IPCC_SCR_CH2C_Pos IPCC_C1SCR_CH2C_Pos +#define IPCC_SCR_CH2C_Msk IPCC_C1SCR_CH2C_Msk +#define IPCC_SCR_CH2C IPCC_C1SCR_CH2C +#define IPCC_SCR_CH3C_Pos IPCC_C1SCR_CH3C_Pos +#define IPCC_SCR_CH3C_Msk IPCC_C1SCR_CH3C_Msk +#define IPCC_SCR_CH3C IPCC_C1SCR_CH3C +#define IPCC_SCR_CH4C_Pos IPCC_C1SCR_CH4C_Pos +#define IPCC_SCR_CH4C_Msk IPCC_C1SCR_CH4C_Msk +#define IPCC_SCR_CH4C IPCC_C1SCR_CH4C +#define IPCC_SCR_CH5C_Pos IPCC_C1SCR_CH5C_Pos +#define IPCC_SCR_CH5C_Msk IPCC_C1SCR_CH5C_Msk +#define IPCC_SCR_CH5C IPCC_C1SCR_CH5C +#define IPCC_SCR_CH6C_Pos IPCC_C1SCR_CH6C_Pos +#define IPCC_SCR_CH6C_Msk IPCC_C1SCR_CH6C_Msk +#define IPCC_SCR_CH6C IPCC_C1SCR_CH6C + +#define IPCC_SCR_CH1S_Pos IPCC_C1SCR_CH1S_Pos +#define IPCC_SCR_CH1S_Msk IPCC_C1SCR_CH1S_Msk +#define IPCC_SCR_CH1S IPCC_C1SCR_CH1S +#define IPCC_SCR_CH2S_Pos IPCC_C1SCR_CH2S_Pos +#define IPCC_SCR_CH2S_Msk IPCC_C1SCR_CH2S_Msk +#define IPCC_SCR_CH2S IPCC_C1SCR_CH2S +#define IPCC_SCR_CH3S_Pos IPCC_C1SCR_CH3S_Pos +#define IPCC_SCR_CH3S_Msk IPCC_C1SCR_CH3S_Msk +#define IPCC_SCR_CH3S IPCC_C1SCR_CH3S +#define IPCC_SCR_CH4S_Pos IPCC_C1SCR_CH4S_Pos +#define IPCC_SCR_CH4S_Msk IPCC_C1SCR_CH4S_Msk +#define IPCC_SCR_CH4S IPCC_C1SCR_CH4S +#define IPCC_SCR_CH5S_Pos IPCC_C1SCR_CH5S_Pos +#define IPCC_SCR_CH5S_Msk IPCC_C1SCR_CH5S_Msk +#define IPCC_SCR_CH5S IPCC_C1SCR_CH5S +#define IPCC_SCR_CH6S_Pos IPCC_C1SCR_CH6S_Pos +#define IPCC_SCR_CH6S_Msk IPCC_C1SCR_CH6S_Msk +#define IPCC_SCR_CH6S IPCC_C1SCR_CH6S + +/********************** Bit definition for IPCC_C1TOC2SR register ***************/ +#define IPCC_SR_CH1F_Pos IPCC_C1TOC2SR_CH1F_Pos +#define IPCC_SR_CH1F_Msk IPCC_C1TOC2SR_CH1F_Msk +#define IPCC_SR_CH1F IPCC_C1TOC2SR_CH1F +#define IPCC_SR_CH2F_Pos IPCC_C1TOC2SR_CH2F_Pos +#define IPCC_SR_CH2F_Msk IPCC_C1TOC2SR_CH2F_Msk +#define IPCC_SR_CH2F IPCC_C1TOC2SR_CH2F +#define IPCC_SR_CH3F_Pos IPCC_C1TOC2SR_CH3F_Pos +#define IPCC_SR_CH3F_Msk IPCC_C1TOC2SR_CH3F_Msk +#define IPCC_SR_CH3F IPCC_C1TOC2SR_CH3F +#define IPCC_SR_CH4F_Pos IPCC_C1TOC2SR_CH4F_Pos +#define IPCC_SR_CH4F_Msk IPCC_C1TOC2SR_CH4F_Msk +#define IPCC_SR_CH4F IPCC_C1TOC2SR_CH4F +#define IPCC_SR_CH5F_Pos IPCC_C1TOC2SR_CH5F_Pos +#define IPCC_SR_CH5F_Msk IPCC_C1TOC2SR_CH5F_Msk +#define IPCC_SR_CH5F IPCC_C1TOC2SR_CH5F +#define IPCC_SR_CH6F_Pos IPCC_C1TOC2SR_CH6F_Pos +#define IPCC_SR_CH6F_Msk IPCC_C1TOC2SR_CH6F_Msk +#define IPCC_SR_CH6F IPCC_C1TOC2SR_CH6F + +/******************** Number of IPCC channels ******************************/ +#define IPCC_CHANNEL_NUMBER 6U + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */ +/* */ +/******************************************************************************/ +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_UE_Pos (0U) +#define USART_CR1_UE_Msk (0x1UL << USART_CR1_UE_Pos) /*!< 0x00000001 */ +#define USART_CR1_UE USART_CR1_UE_Msk /*!< USART Enable */ +#define USART_CR1_UESM_Pos (1U) +#define USART_CR1_UESM_Msk (0x1UL << USART_CR1_UESM_Pos) /*!< 0x00000002 */ +#define USART_CR1_UESM USART_CR1_UESM_Msk /*!< USART Enable in STOP Mode */ +#define USART_CR1_RE_Pos (2U) +#define USART_CR1_RE_Msk (0x1UL << USART_CR1_RE_Pos) /*!< 0x00000004 */ +#define USART_CR1_RE USART_CR1_RE_Msk /*!< Receiver Enable */ +#define USART_CR1_TE_Pos (3U) +#define USART_CR1_TE_Msk (0x1UL << USART_CR1_TE_Pos) /*!< 0x00000008 */ +#define USART_CR1_TE USART_CR1_TE_Msk /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE_Pos (4U) +#define USART_CR1_IDLEIE_Msk (0x1UL << USART_CR1_IDLEIE_Pos) /*!< 0x00000010 */ +#define USART_CR1_IDLEIE USART_CR1_IDLEIE_Msk /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE_Pos (5U) +#define USART_CR1_RXNEIE_Msk (0x1UL << USART_CR1_RXNEIE_Pos) /*!< 0x00000020 */ +#define USART_CR1_RXNEIE USART_CR1_RXNEIE_Msk /*!< RXNE Interrupt Enable */ +#define USART_CR1_RXNEIE_RXFNEIE_Pos USART_CR1_RXNEIE_Pos +#define USART_CR1_RXNEIE_RXFNEIE_Msk USART_CR1_RXNEIE_Msk /*!< 0x00000020 */ +#define USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_Msk /*!< RXNE and RX FIFO Not Empty Interrupt Enable */ +#define USART_CR1_TCIE_Pos (6U) +#define USART_CR1_TCIE_Msk (0x1UL << USART_CR1_TCIE_Pos) /*!< 0x00000040 */ +#define USART_CR1_TCIE USART_CR1_TCIE_Msk /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE_Pos (7U) +#define USART_CR1_TXEIE_Msk (0x1UL << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ +#define USART_CR1_TXEIE USART_CR1_TXEIE_Msk /*!< TXE Interrupt Enable */ +#define USART_CR1_TXEIE_TXFNFIE_Pos (7U) +#define USART_CR1_TXEIE_TXFNFIE_Msk (0x1UL << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ +#define USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE /*!< TXE and TX FIFO Not Full Interrupt Enable */ +#define USART_CR1_PEIE_Pos (8U) +#define USART_CR1_PEIE_Msk (0x1UL << USART_CR1_PEIE_Pos) /*!< 0x00000100 */ +#define USART_CR1_PEIE USART_CR1_PEIE_Msk /*!< PE Interrupt Enable */ +#define USART_CR1_PS_Pos (9U) +#define USART_CR1_PS_Msk (0x1UL << USART_CR1_PS_Pos) /*!< 0x00000200 */ +#define USART_CR1_PS USART_CR1_PS_Msk /*!< Parity Selection */ +#define USART_CR1_PCE_Pos (10U) +#define USART_CR1_PCE_Msk (0x1UL << USART_CR1_PCE_Pos) /*!< 0x00000400 */ +#define USART_CR1_PCE USART_CR1_PCE_Msk /*!< Parity Control Enable */ +#define USART_CR1_WAKE_Pos (11U) +#define USART_CR1_WAKE_Msk (0x1UL << USART_CR1_WAKE_Pos) /*!< 0x00000800 */ +#define USART_CR1_WAKE USART_CR1_WAKE_Msk /*!< Receiver Wakeup method */ +#define USART_CR1_M0_Pos (12U) +#define USART_CR1_M0_Msk (0x1UL << USART_CR1_M0_Pos) /*!< 0x00001000 */ +#define USART_CR1_M0 USART_CR1_M0_Msk /*!< Word length - Bit 0 */ +#define USART_CR1_MME_Pos (13U) +#define USART_CR1_MME_Msk (0x1UL << USART_CR1_MME_Pos) /*!< 0x00002000 */ +#define USART_CR1_MME USART_CR1_MME_Msk /*!< Mute Mode Enable */ +#define USART_CR1_CMIE_Pos (14U) +#define USART_CR1_CMIE_Msk (0x1UL << USART_CR1_CMIE_Pos) /*!< 0x00004000 */ +#define USART_CR1_CMIE USART_CR1_CMIE_Msk /*!< Character match interrupt enable */ +#define USART_CR1_OVER8_Pos (15U) +#define USART_CR1_OVER8_Msk (0x1UL << USART_CR1_OVER8_Pos) /*!< 0x00008000 */ +#define USART_CR1_OVER8 USART_CR1_OVER8_Msk /*!< Oversampling by 8-bit or 16-bit mode */ +#define USART_CR1_DEDT_Pos (16U) +#define USART_CR1_DEDT_Msk (0x1FUL << USART_CR1_DEDT_Pos) /*!< 0x001F0000 */ +#define USART_CR1_DEDT USART_CR1_DEDT_Msk /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */ +#define USART_CR1_DEDT_0 (0x01U << USART_CR1_DEDT_Pos) /*!< 0x00010000 */ +#define USART_CR1_DEDT_1 (0x02U << USART_CR1_DEDT_Pos) /*!< 0x00020000 */ +#define USART_CR1_DEDT_2 (0x04U << USART_CR1_DEDT_Pos) /*!< 0x00040000 */ +#define USART_CR1_DEDT_3 (0x08U << USART_CR1_DEDT_Pos) /*!< 0x00080000 */ +#define USART_CR1_DEDT_4 (0x10U << USART_CR1_DEDT_Pos) /*!< 0x00100000 */ +#define USART_CR1_DEAT_Pos (21U) +#define USART_CR1_DEAT_Msk (0x1FUL << USART_CR1_DEAT_Pos) /*!< 0x03E00000 */ +#define USART_CR1_DEAT USART_CR1_DEAT_Msk /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */ +#define USART_CR1_DEAT_0 (0x01U << USART_CR1_DEAT_Pos) /*!< 0x00200000 */ +#define USART_CR1_DEAT_1 (0x02U << USART_CR1_DEAT_Pos) /*!< 0x00400000 */ +#define USART_CR1_DEAT_2 (0x04U << USART_CR1_DEAT_Pos) /*!< 0x00800000 */ +#define USART_CR1_DEAT_3 (0x08U << USART_CR1_DEAT_Pos) /*!< 0x01000000 */ +#define USART_CR1_DEAT_4 (0x10U << USART_CR1_DEAT_Pos) /*!< 0x02000000 */ +#define USART_CR1_RTOIE_Pos (26U) +#define USART_CR1_RTOIE_Msk (0x1UL << USART_CR1_RTOIE_Pos) /*!< 0x04000000 */ +#define USART_CR1_RTOIE USART_CR1_RTOIE_Msk /*!< Receive Time Out Interrupt Enable */ +#define USART_CR1_EOBIE_Pos (27U) +#define USART_CR1_EOBIE_Msk (0x1UL << USART_CR1_EOBIE_Pos) /*!< 0x08000000 */ +#define USART_CR1_EOBIE USART_CR1_EOBIE_Msk /*!< End of Block Interrupt Enable */ +#define USART_CR1_M1_Pos (28U) +#define USART_CR1_M1_Msk (0x1UL << USART_CR1_M1_Pos) /*!< 0x10000000 */ +#define USART_CR1_M1 USART_CR1_M1_Msk /*!< Word length - Bit 1 */ +#define USART_CR1_M (uint32_t)(USART_CR1_M1 | USART_CR1_M0) /*!< Word length */ +#define USART_CR1_FIFOEN_Pos (29U) +#define USART_CR1_FIFOEN_Msk (0x1UL << USART_CR1_FIFOEN_Pos) /*!< 0x20000000 */ +#define USART_CR1_FIFOEN USART_CR1_FIFOEN_Msk /*!< FIFO mode enable */ +#define USART_CR1_TXFEIE_Pos (30U) +#define USART_CR1_TXFEIE_Msk (0x1UL << USART_CR1_TXFEIE_Pos) /*!< 0x40000000 */ +#define USART_CR1_TXFEIE USART_CR1_TXFEIE_Msk /*!< TX FIFO Empty Interrupt Enable */ +#define USART_CR1_RXFFIE_Pos (31U) +#define USART_CR1_RXFFIE_Msk (0x1UL << USART_CR1_RXFFIE_Pos) /*!< 0x80000000 */ +#define USART_CR1_RXFFIE USART_CR1_RXFFIE_Msk /*!< RX FIFO Full Interrupt Enable */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_SLVEN_Pos (0U) +#define USART_CR2_SLVEN_Msk (0x1UL << USART_CR2_SLVEN_Pos) /*!< 0x00000001 */ +#define USART_CR2_SLVEN USART_CR2_SLVEN_Msk /*!< Synchronous Slave mode enable */ +#define USART_CR2_DIS_NSS_Pos (3U) +#define USART_CR2_DIS_NSS_Msk (0x1UL << USART_CR2_DIS_NSS_Pos) /*!< 0x00000008 */ +#define USART_CR2_DIS_NSS USART_CR2_DIS_NSS_Msk /*!< Slave Select (NSS) pin management */ +#define USART_CR2_ADDM7_Pos (4U) +#define USART_CR2_ADDM7_Msk (0x1UL << USART_CR2_ADDM7_Pos) /*!< 0x00000010 */ +#define USART_CR2_ADDM7 USART_CR2_ADDM7_Msk /*!< 7-bit or 4-bit Address Detection */ +#define USART_CR2_LBDL_Pos (5U) +#define USART_CR2_LBDL_Msk (0x1UL << USART_CR2_LBDL_Pos) /*!< 0x00000020 */ +#define USART_CR2_LBDL USART_CR2_LBDL_Msk /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE_Pos (6U) +#define USART_CR2_LBDIE_Msk (0x1UL << USART_CR2_LBDIE_Pos) /*!< 0x00000040 */ +#define USART_CR2_LBDIE USART_CR2_LBDIE_Msk /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL_Pos (8U) +#define USART_CR2_LBCL_Msk (0x1UL << USART_CR2_LBCL_Pos) /*!< 0x00000100 */ +#define USART_CR2_LBCL USART_CR2_LBCL_Msk /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA_Pos (9U) +#define USART_CR2_CPHA_Msk (0x1UL << USART_CR2_CPHA_Pos) /*!< 0x00000200 */ +#define USART_CR2_CPHA USART_CR2_CPHA_Msk /*!< Clock Phase */ +#define USART_CR2_CPOL_Pos (10U) +#define USART_CR2_CPOL_Msk (0x1UL << USART_CR2_CPOL_Pos) /*!< 0x00000400 */ +#define USART_CR2_CPOL USART_CR2_CPOL_Msk /*!< Clock Polarity */ +#define USART_CR2_CLKEN_Pos (11U) +#define USART_CR2_CLKEN_Msk (0x1UL << USART_CR2_CLKEN_Pos) /*!< 0x00000800 */ +#define USART_CR2_CLKEN USART_CR2_CLKEN_Msk /*!< Clock Enable */ +#define USART_CR2_STOP_Pos (12U) +#define USART_CR2_STOP_Msk (0x3UL << USART_CR2_STOP_Pos) /*!< 0x00003000 */ +#define USART_CR2_STOP USART_CR2_STOP_Msk /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 (0x1U << USART_CR2_STOP_Pos) /*!< 0x00001000 */ +#define USART_CR2_STOP_1 (0x2U << USART_CR2_STOP_Pos) /*!< 0x00002000 */ +#define USART_CR2_LINEN_Pos (14U) +#define USART_CR2_LINEN_Msk (0x1UL << USART_CR2_LINEN_Pos) /*!< 0x00004000 */ +#define USART_CR2_LINEN USART_CR2_LINEN_Msk /*!< LIN mode enable */ +#define USART_CR2_SWAP_Pos (15U) +#define USART_CR2_SWAP_Msk (0x1UL << USART_CR2_SWAP_Pos) /*!< 0x00008000 */ +#define USART_CR2_SWAP USART_CR2_SWAP_Msk /*!< SWAP TX/RX pins */ +#define USART_CR2_RXINV_Pos (16U) +#define USART_CR2_RXINV_Msk (0x1UL << USART_CR2_RXINV_Pos) /*!< 0x00010000 */ +#define USART_CR2_RXINV USART_CR2_RXINV_Msk /*!< RX pin active level inversion */ +#define USART_CR2_TXINV_Pos (17U) +#define USART_CR2_TXINV_Msk (0x1UL << USART_CR2_TXINV_Pos) /*!< 0x00020000 */ +#define USART_CR2_TXINV USART_CR2_TXINV_Msk /*!< TX pin active level inversion */ +#define USART_CR2_DATAINV_Pos (18U) +#define USART_CR2_DATAINV_Msk (0x1UL << USART_CR2_DATAINV_Pos) /*!< 0x00040000 */ +#define USART_CR2_DATAINV USART_CR2_DATAINV_Msk /*!< Binary data inversion */ +#define USART_CR2_MSBFIRST_Pos (19U) +#define USART_CR2_MSBFIRST_Msk (0x1UL << USART_CR2_MSBFIRST_Pos) /*!< 0x00080000 */ +#define USART_CR2_MSBFIRST USART_CR2_MSBFIRST_Msk /*!< Most Significant Bit First */ +#define USART_CR2_ABREN_Pos (20U) +#define USART_CR2_ABREN_Msk (0x1UL << USART_CR2_ABREN_Pos) /*!< 0x00100000 */ +#define USART_CR2_ABREN USART_CR2_ABREN_Msk /*!< Auto Baud-Rate Enable*/ +#define USART_CR2_ABRMODE_Pos (21U) +#define USART_CR2_ABRMODE_Msk (0x3UL << USART_CR2_ABRMODE_Pos) /*!< 0x00600000 */ +#define USART_CR2_ABRMODE USART_CR2_ABRMODE_Msk /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */ +#define USART_CR2_ABRMODE_0 (0x1U << USART_CR2_ABRMODE_Pos) /*!< 0x00200000 */ +#define USART_CR2_ABRMODE_1 (0x2U << USART_CR2_ABRMODE_Pos) /*!< 0x00400000 */ +#define USART_CR2_RTOEN_Pos (23U) +#define USART_CR2_RTOEN_Msk (0x1UL << USART_CR2_RTOEN_Pos) /*!< 0x00800000 */ +#define USART_CR2_RTOEN USART_CR2_RTOEN_Msk /*!< Receiver Time-Out enable */ +#define USART_CR2_ADD_Pos (24U) +#define USART_CR2_ADD_Msk (0xFFUL << USART_CR2_ADD_Pos) /*!< 0xFF000000 */ +#define USART_CR2_ADD USART_CR2_ADD_Msk /*!< Address of the USART node */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE_Pos (0U) +#define USART_CR3_EIE_Msk (0x1UL << USART_CR3_EIE_Pos) /*!< 0x00000001 */ +#define USART_CR3_EIE USART_CR3_EIE_Msk /*!< Error Interrupt Enable */ +#define USART_CR3_IREN_Pos (1U) +#define USART_CR3_IREN_Msk (0x1UL << USART_CR3_IREN_Pos) /*!< 0x00000002 */ +#define USART_CR3_IREN USART_CR3_IREN_Msk /*!< IrDA mode Enable */ +#define USART_CR3_IRLP_Pos (2U) +#define USART_CR3_IRLP_Msk (0x1UL << USART_CR3_IRLP_Pos) /*!< 0x00000004 */ +#define USART_CR3_IRLP USART_CR3_IRLP_Msk /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL_Pos (3U) +#define USART_CR3_HDSEL_Msk (0x1UL << USART_CR3_HDSEL_Pos) /*!< 0x00000008 */ +#define USART_CR3_HDSEL USART_CR3_HDSEL_Msk /*!< Half-Duplex Selection */ +#define USART_CR3_NACK_Pos (4U) +#define USART_CR3_NACK_Msk (0x1UL << USART_CR3_NACK_Pos) /*!< 0x00000010 */ +#define USART_CR3_NACK USART_CR3_NACK_Msk /*!< SmartCard NACK enable */ +#define USART_CR3_SCEN_Pos (5U) +#define USART_CR3_SCEN_Msk (0x1UL << USART_CR3_SCEN_Pos) /*!< 0x00000020 */ +#define USART_CR3_SCEN USART_CR3_SCEN_Msk /*!< SmartCard mode enable */ +#define USART_CR3_DMAR_Pos (6U) +#define USART_CR3_DMAR_Msk (0x1UL << USART_CR3_DMAR_Pos) /*!< 0x00000040 */ +#define USART_CR3_DMAR USART_CR3_DMAR_Msk /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT_Pos (7U) +#define USART_CR3_DMAT_Msk (0x1UL << USART_CR3_DMAT_Pos) /*!< 0x00000080 */ +#define USART_CR3_DMAT USART_CR3_DMAT_Msk /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE_Pos (8U) +#define USART_CR3_RTSE_Msk (0x1UL << USART_CR3_RTSE_Pos) /*!< 0x00000100 */ +#define USART_CR3_RTSE USART_CR3_RTSE_Msk /*!< RTS Enable */ +#define USART_CR3_CTSE_Pos (9U) +#define USART_CR3_CTSE_Msk (0x1UL << USART_CR3_CTSE_Pos) /*!< 0x00000200 */ +#define USART_CR3_CTSE USART_CR3_CTSE_Msk +#define USART_CR3_CTSIE_Pos (10U) +#define USART_CR3_CTSIE_Msk (0x1UL << USART_CR3_CTSIE_Pos) /*!< 0x00000400 */ +#define USART_CR3_CTSIE USART_CR3_CTSIE_Msk /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT_Pos (11U) +#define USART_CR3_ONEBIT_Msk (0x1UL << USART_CR3_ONEBIT_Pos) /*!< 0x00000800 */ +#define USART_CR3_ONEBIT USART_CR3_ONEBIT_Msk /*!< One sample bit method enable */ +#define USART_CR3_OVRDIS_Pos (12U) +#define USART_CR3_OVRDIS_Msk (0x1UL << USART_CR3_OVRDIS_Pos) /*!< 0x00001000 */ +#define USART_CR3_OVRDIS USART_CR3_OVRDIS_Msk /*!< Overrun Disable */ +#define USART_CR3_DDRE_Pos (13U) +#define USART_CR3_DDRE_Msk (0x1UL << USART_CR3_DDRE_Pos) /*!< 0x00002000 */ +#define USART_CR3_DDRE USART_CR3_DDRE_Msk /*!< DMA Disable on Reception Error */ +#define USART_CR3_DEM_Pos (14U) +#define USART_CR3_DEM_Msk (0x1UL << USART_CR3_DEM_Pos) /*!< 0x00004000 */ +#define USART_CR3_DEM USART_CR3_DEM_Msk /*!< Driver Enable Mode */ +#define USART_CR3_DEP_Pos (15U) +#define USART_CR3_DEP_Msk (0x1UL << USART_CR3_DEP_Pos) /*!< 0x00008000 */ +#define USART_CR3_DEP USART_CR3_DEP_Msk /*!< Driver Enable Polarity Selection */ +#define USART_CR3_SCARCNT_Pos (17U) +#define USART_CR3_SCARCNT_Msk (0x7UL << USART_CR3_SCARCNT_Pos) /*!< 0x000E0000 */ +#define USART_CR3_SCARCNT USART_CR3_SCARCNT_Msk /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */ +#define USART_CR3_SCARCNT_0 (0x1U << USART_CR3_SCARCNT_Pos) /*!< 0x00020000 */ +#define USART_CR3_SCARCNT_1 (0x2U << USART_CR3_SCARCNT_Pos) /*!< 0x00040000 */ +#define USART_CR3_SCARCNT_2 (0x4U << USART_CR3_SCARCNT_Pos) /*!< 0x00080000 */ +#define USART_CR3_WUS_Pos (20U) +#define USART_CR3_WUS_Msk (0x3UL << USART_CR3_WUS_Pos) /*!< 0x00300000 */ +#define USART_CR3_WUS USART_CR3_WUS_Msk /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */ +#define USART_CR3_WUS_0 (0x1U << USART_CR3_WUS_Pos) /*!< 0x00100000 */ +#define USART_CR3_WUS_1 (0x2U << USART_CR3_WUS_Pos) /*!< 0x00200000 */ +#define USART_CR3_WUFIE_Pos (22U) +#define USART_CR3_WUFIE_Msk (0x1UL << USART_CR3_WUFIE_Pos) /*!< 0x00400000 */ +#define USART_CR3_WUFIE USART_CR3_WUFIE_Msk /*!< Wake Up Interrupt Enable */ +#define USART_CR3_TXFTIE_Pos (23U) +#define USART_CR3_TXFTIE_Msk (0x1UL << USART_CR3_TXFTIE_Pos) /*!< 0x00800000 */ +#define USART_CR3_TXFTIE USART_CR3_TXFTIE_Msk /*!< TX FIFO Threshold Interrupt Enable */ +#define USART_CR3_TCBGTIE_Pos (24U) +#define USART_CR3_TCBGTIE_Msk (0x1UL << USART_CR3_TCBGTIE_Pos) /*!< 0x01000000 */ +#define USART_CR3_TCBGTIE USART_CR3_TCBGTIE_Msk /*!< Transmission Complete Before Guard Time Interrupt Enable */ +#define USART_CR3_RXFTCFG_Pos (25U) +#define USART_CR3_RXFTCFG_Msk (0x7UL << USART_CR3_RXFTCFG_Pos) /*!< 0x0E000000 */ +#define USART_CR3_RXFTCFG USART_CR3_RXFTCFG_Msk /*!< RX FIFO Threshold Configuration */ +#define USART_CR3_RXFTCFG_0 (0x1U << USART_CR3_RXFTCFG_Pos) /*!< 0x02000000 */ +#define USART_CR3_RXFTCFG_1 (0x2U << USART_CR3_RXFTCFG_Pos) /*!< 0x04000000 */ +#define USART_CR3_RXFTCFG_2 (0x4U << USART_CR3_RXFTCFG_Pos) /*!< 0x08000000 */ +#define USART_CR3_RXFTIE_Pos (28U) +#define USART_CR3_RXFTIE_Msk (0x1UL << USART_CR3_RXFTIE_Pos) /*!< 0x10000000 */ +#define USART_CR3_RXFTIE USART_CR3_RXFTIE_Msk /*!< RX FIFO Threshold Interrupt Enable */ +#define USART_CR3_TXFTCFG_Pos (29U) +#define USART_CR3_TXFTCFG_Msk (0x7UL << USART_CR3_TXFTCFG_Pos) /*!< 0xE0000000 */ +#define USART_CR3_TXFTCFG USART_CR3_TXFTCFG_Msk /*!< TX FIFO Threshold configuration */ +#define USART_CR3_TXFTCFG_0 (0x1U << USART_CR3_TXFTCFG_Pos) /*!< 0x20000000 */ +#define USART_CR3_TXFTCFG_1 (0x2U << USART_CR3_TXFTCFG_Pos) /*!< 0x40000000 */ +#define USART_CR3_TXFTCFG_2 (0x4U << USART_CR3_TXFTCFG_Pos) /*!< 0x80000000 */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_BRR ((uint16_t)0xFFFF) /*!< USART Baud rate register [15:0] */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC_Pos (0U) +#define USART_GTPR_PSC_Msk (0xFFUL << USART_GTPR_PSC_Pos) /*!< 0x000000FF */ +#define USART_GTPR_PSC USART_GTPR_PSC_Msk /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_GT_Pos (8U) +#define USART_GTPR_GT_Msk (0xFFUL << USART_GTPR_GT_Pos) /*!< 0x0000FF00 */ +#define USART_GTPR_GT USART_GTPR_GT_Msk /*!< GT[7:0] bits (Guard time value) */ + +/******************* Bit definition for USART_RTOR register *****************/ +#define USART_RTOR_RTO_Pos (0U) +#define USART_RTOR_RTO_Msk (0xFFFFFFUL << USART_RTOR_RTO_Pos) /*!< 0x00FFFFFF */ +#define USART_RTOR_RTO USART_RTOR_RTO_Msk /*!< Receiver Timeout Value */ +#define USART_RTOR_BLEN_Pos (24U) +#define USART_RTOR_BLEN_Msk (0xFFUL << USART_RTOR_BLEN_Pos) /*!< 0xFF000000 */ +#define USART_RTOR_BLEN USART_RTOR_BLEN_Msk /*!< Block Length */ + +/******************* Bit definition for USART_RQR register ******************/ +#define USART_RQR_ABRRQ_Pos (0U) +#define USART_RQR_ABRRQ_Msk (0x1UL << USART_RQR_ABRRQ_Pos) /*!< 0x00000001 */ +#define USART_RQR_ABRRQ USART_RQR_ABRRQ_Msk /*!< Auto-Baud Rate Request */ +#define USART_RQR_SBKRQ_Pos (1U) +#define USART_RQR_SBKRQ_Msk (0x1UL << USART_RQR_SBKRQ_Pos) /*!< 0x00000002 */ +#define USART_RQR_SBKRQ USART_RQR_SBKRQ_Msk /*!< Send Break Request */ +#define USART_RQR_MMRQ_Pos (2U) +#define USART_RQR_MMRQ_Msk (0x1UL << USART_RQR_MMRQ_Pos) /*!< 0x00000004 */ +#define USART_RQR_MMRQ USART_RQR_MMRQ_Msk /*!< Mute Mode Request */ +#define USART_RQR_RXFRQ_Pos (3U) +#define USART_RQR_RXFRQ_Msk (0x1UL << USART_RQR_RXFRQ_Pos) /*!< 0x00000008 */ +#define USART_RQR_RXFRQ USART_RQR_RXFRQ_Msk /*!< Receive Data flush Request */ +#define USART_RQR_TXFRQ_Pos (4U) +#define USART_RQR_TXFRQ_Msk (0x1UL << USART_RQR_TXFRQ_Pos) /*!< 0x00000010 */ +#define USART_RQR_TXFRQ USART_RQR_TXFRQ_Msk /*!< Transmit Data flush Request */ + +/******************* Bit definition for USART_ISR register ******************/ +#define USART_ISR_PE_Pos (0U) +#define USART_ISR_PE_Msk (0x1UL << USART_ISR_PE_Pos) /*!< 0x00000001 */ +#define USART_ISR_PE USART_ISR_PE_Msk /*!< Parity Error */ +#define USART_ISR_FE_Pos (1U) +#define USART_ISR_FE_Msk (0x1UL << USART_ISR_FE_Pos) /*!< 0x00000002 */ +#define USART_ISR_FE USART_ISR_FE_Msk /*!< Framing Error */ +#define USART_ISR_NE_Pos (2U) +#define USART_ISR_NE_Msk (0x1UL << USART_ISR_NE_Pos) /*!< 0x00000004 */ +#define USART_ISR_NE USART_ISR_NE_Msk /*!< START bit Noise Error detection Flag */ +#define USART_ISR_ORE_Pos (3U) +#define USART_ISR_ORE_Msk (0x1UL << USART_ISR_ORE_Pos) /*!< 0x00000008 */ +#define USART_ISR_ORE USART_ISR_ORE_Msk /*!< OverRun Error */ +#define USART_ISR_IDLE_Pos (4U) +#define USART_ISR_IDLE_Msk (0x1UL << USART_ISR_IDLE_Pos) /*!< 0x00000010 */ +#define USART_ISR_IDLE USART_ISR_IDLE_Msk /*!< IDLE line detected */ +#define USART_ISR_RXNE_Pos (5U) +#define USART_ISR_RXNE_Msk (0x1UL << USART_ISR_RXNE_Pos) /*!< 0x00000020 */ +#define USART_ISR_RXNE USART_ISR_RXNE_Msk /*!< Read Data Register Not Empty */ +#define USART_ISR_RXNE_RXFNE_Pos USART_ISR_RXNE_Pos +#define USART_ISR_RXNE_RXFNE_Msk USART_ISR_RXNE_Msk /*!< 0x00000020 */ +#define USART_ISR_RXNE_RXFNE USART_ISR_RXNE_Msk /*!< Read Data Register or RX FIFO Not Empty */ +#define USART_ISR_TC_Pos (6U) +#define USART_ISR_TC_Msk (0x1UL << USART_ISR_TC_Pos) /*!< 0x00000040 */ +#define USART_ISR_TC USART_ISR_TC_Msk /*!< Transmission Complete */ +#define USART_ISR_TXE_Pos (7U) +#define USART_ISR_TXE_Msk (0x1UL << USART_ISR_TXE_Pos) /*!< 0x00000080 */ +#define USART_ISR_TXE USART_ISR_TXE_Msk /*!< Transmit Data Register Empty */ +#define USART_ISR_TXE_TXFNF_Pos USART_ISR_TXE_Pos +#define USART_ISR_TXE_TXFNF_Msk USART_ISR_TXE_Msk /*!< 0x00000080 */ +#define USART_ISR_TXE_TXFNF USART_ISR_TXE_Msk /*!< Transmit Data Register Empty or TX FIFO Not Full Flag */ +#define USART_ISR_LBDF_Pos (8U) +#define USART_ISR_LBDF_Msk (0x1UL << USART_ISR_LBDF_Pos) /*!< 0x00000100 */ +#define USART_ISR_LBDF USART_ISR_LBDF_Msk /*!< LIN Break Detection Flag */ +#define USART_ISR_CTSIF_Pos (9U) +#define USART_ISR_CTSIF_Msk (0x1UL << USART_ISR_CTSIF_Pos) /*!< 0x00000200 */ +#define USART_ISR_CTSIF USART_ISR_CTSIF_Msk /*!< CTS interrupt Flag */ +#define USART_ISR_CTS_Pos (10U) +#define USART_ISR_CTS_Msk (0x1UL << USART_ISR_CTS_Pos) /*!< 0x00000400 */ +#define USART_ISR_CTS USART_ISR_CTS_Msk /*!< CTS Flag */ +#define USART_ISR_RTOF_Pos (11U) +#define USART_ISR_RTOF_Msk (0x1UL << USART_ISR_RTOF_Pos) /*!< 0x00000800 */ +#define USART_ISR_RTOF USART_ISR_RTOF_Msk /*!< Receiver Timeout */ +#define USART_ISR_EOBF_Pos (12U) +#define USART_ISR_EOBF_Msk (0x1UL << USART_ISR_EOBF_Pos) /*!< 0x00001000 */ +#define USART_ISR_EOBF USART_ISR_EOBF_Msk /*!< End Of Block Flag */ +#define USART_ISR_UDR_Pos (13U) +#define USART_ISR_UDR_Msk (0x1UL << USART_ISR_UDR_Pos) /*!< 0x00002000 */ +#define USART_ISR_UDR USART_ISR_UDR_Msk /*!< SPI Slave Underrun error Flag */ +#define USART_ISR_ABRE_Pos (14U) +#define USART_ISR_ABRE_Msk (0x1UL << USART_ISR_ABRE_Pos) /*!< 0x00004000 */ +#define USART_ISR_ABRE USART_ISR_ABRE_Msk /*!< Auto-Baud Rate Error */ +#define USART_ISR_ABRF_Pos (15U) +#define USART_ISR_ABRF_Msk (0x1UL << USART_ISR_ABRF_Pos) /*!< 0x00008000 */ +#define USART_ISR_ABRF USART_ISR_ABRF_Msk /*!< Auto-Baud Rate Flag */ +#define USART_ISR_BUSY_Pos (16U) +#define USART_ISR_BUSY_Msk (0x1UL << USART_ISR_BUSY_Pos) /*!< 0x00010000 */ +#define USART_ISR_BUSY USART_ISR_BUSY_Msk /*!< Busy Flag */ +#define USART_ISR_CMF_Pos (17U) +#define USART_ISR_CMF_Msk (0x1UL << USART_ISR_CMF_Pos) /*!< 0x00020000 */ +#define USART_ISR_CMF USART_ISR_CMF_Msk /*!< Character Match Flag */ +#define USART_ISR_SBKF_Pos (18U) +#define USART_ISR_SBKF_Msk (0x1UL << USART_ISR_SBKF_Pos) /*!< 0x00040000 */ +#define USART_ISR_SBKF USART_ISR_SBKF_Msk /*!< Send Break Flag */ +#define USART_ISR_RWU_Pos (19U) +#define USART_ISR_RWU_Msk (0x1UL << USART_ISR_RWU_Pos) /*!< 0x00080000 */ +#define USART_ISR_RWU USART_ISR_RWU_Msk /*!< Receive Wake Up from mute mode Flag */ +#define USART_ISR_WUF_Pos (20U) +#define USART_ISR_WUF_Msk (0x1UL << USART_ISR_WUF_Pos) /*!< 0x00100000 */ +#define USART_ISR_WUF USART_ISR_WUF_Msk /*!< Wake Up from stop mode Flag */ +#define USART_ISR_TEACK_Pos (21U) +#define USART_ISR_TEACK_Msk (0x1UL << USART_ISR_TEACK_Pos) /*!< 0x00200000 */ +#define USART_ISR_TEACK USART_ISR_TEACK_Msk /*!< Transmit Enable Acknowledge Flag */ +#define USART_ISR_REACK_Pos (22U) +#define USART_ISR_REACK_Msk (0x1UL << USART_ISR_REACK_Pos) /*!< 0x00400000 */ +#define USART_ISR_REACK USART_ISR_REACK_Msk /*!< Receive Enable Acknowledge Flag */ +#define USART_ISR_TXFE_Pos (23U) +#define USART_ISR_TXFE_Msk (0x1UL << USART_ISR_TXFE_Pos) /*!< 0x00800000 */ +#define USART_ISR_TXFE USART_ISR_TXFE_Msk /*!< TX FIFO Empty Flag */ +#define USART_ISR_RXFF_Pos (24U) +#define USART_ISR_RXFF_Msk (0x1UL << USART_ISR_RXFF_Pos) /*!< 0x01000000 */ +#define USART_ISR_RXFF USART_ISR_RXFF_Msk /*!< RX FIFO Full Flag */ +#define USART_ISR_TCBGT_Pos (25U) +#define USART_ISR_TCBGT_Msk (0x1UL << USART_ISR_TCBGT_Pos) /*!< 0x02000000 */ +#define USART_ISR_TCBGT USART_ISR_TCBGT_Msk /*!< Transmission Complete Before Guard Time completion */ +#define USART_ISR_RXFT_Pos (26U) +#define USART_ISR_RXFT_Msk (0x1UL << USART_ISR_RXFT_Pos) /*!< 0x04000000 */ +#define USART_ISR_RXFT USART_ISR_RXFT_Msk /*!< RX FIFO Threshold Flag */ +#define USART_ISR_TXFT_Pos (27U) +#define USART_ISR_TXFT_Msk (0x1UL << USART_ISR_TXFT_Pos) /*!< 0x08000000 */ +#define USART_ISR_TXFT USART_ISR_TXFT_Msk /*!< TX FIFO Threshold Flag */ + +/******************* Bit definition for USART_ICR register ******************/ +#define USART_ICR_PECF_Pos (0U) +#define USART_ICR_PECF_Msk (0x1UL << USART_ICR_PECF_Pos) /*!< 0x00000001 */ +#define USART_ICR_PECF USART_ICR_PECF_Msk /*!< Parity Error Clear Flag */ +#define USART_ICR_FECF_Pos (1U) +#define USART_ICR_FECF_Msk (0x1UL << USART_ICR_FECF_Pos) /*!< 0x00000002 */ +#define USART_ICR_FECF USART_ICR_FECF_Msk /*!< Framing Error Clear Flag */ +#define USART_ICR_NECF_Pos (2U) +#define USART_ICR_NECF_Msk (0x1UL << USART_ICR_NECF_Pos) /*!< 0x00000004 */ +#define USART_ICR_NECF USART_ICR_NECF_Msk /*!< Noise Error detected Clear Flag */ +#define USART_ICR_ORECF_Pos (3U) +#define USART_ICR_ORECF_Msk (0x1UL << USART_ICR_ORECF_Pos) /*!< 0x00000008 */ +#define USART_ICR_ORECF USART_ICR_ORECF_Msk /*!< OverRun Error Clear Flag */ +#define USART_ICR_IDLECF_Pos (4U) +#define USART_ICR_IDLECF_Msk (0x1UL << USART_ICR_IDLECF_Pos) /*!< 0x00000010 */ +#define USART_ICR_IDLECF USART_ICR_IDLECF_Msk /*!< IDLE line detected Clear Flag */ +#define USART_ICR_TXFECF_Pos (5U) +#define USART_ICR_TXFECF_Msk (0x1UL << USART_ICR_TXFECF_Pos) /*!< 0x00000020 */ +#define USART_ICR_TXFECF USART_ICR_TXFECF_Msk /*!< TX FIFO Empty Clear Flag */ +#define USART_ICR_TCCF_Pos (6U) +#define USART_ICR_TCCF_Msk (0x1UL << USART_ICR_TCCF_Pos) /*!< 0x00000040 */ +#define USART_ICR_TCCF USART_ICR_TCCF_Msk /*!< Transmission Complete Clear Flag */ +#define USART_ICR_TCBGTCF_Pos (7U) +#define USART_ICR_TCBGTCF_Msk (0x1UL << USART_ICR_TCBGTCF_Pos) /*!< 0x00000080 */ +#define USART_ICR_TCBGTCF USART_ICR_TCBGTCF_Msk /*!< Transmission Complete Before Guard Time Clear Flag */ +#define USART_ICR_LBDCF_Pos (8U) +#define USART_ICR_LBDCF_Msk (0x1UL << USART_ICR_LBDCF_Pos) /*!< 0x00000100 */ +#define USART_ICR_LBDCF USART_ICR_LBDCF_Msk /*!< LIN Break Detection Clear Flag */ +#define USART_ICR_CTSCF_Pos (9U) +#define USART_ICR_CTSCF_Msk (0x1UL << USART_ICR_CTSCF_Pos) /*!< 0x00000200 */ +#define USART_ICR_CTSCF USART_ICR_CTSCF_Msk /*!< CTS Interrupt Clear Flag */ +#define USART_ICR_RTOCF_Pos (11U) +#define USART_ICR_RTOCF_Msk (0x1UL << USART_ICR_RTOCF_Pos) /*!< 0x00000800 */ +#define USART_ICR_RTOCF USART_ICR_RTOCF_Msk /*!< Receiver Time Out Clear Flag */ +#define USART_ICR_EOBCF_Pos (12U) +#define USART_ICR_EOBCF_Msk (0x1UL << USART_ICR_EOBCF_Pos) /*!< 0x00001000 */ +#define USART_ICR_EOBCF USART_ICR_EOBCF_Msk /*!< End Of Block Clear Flag */ +#define USART_ICR_UDRCF_Pos (13U) +#define USART_ICR_UDRCF_Msk (0x1UL << USART_ICR_UDRCF_Pos) /*!< 0x00002000 */ +#define USART_ICR_UDRCF USART_ICR_UDRCF_Msk /*!< SPI Slave Underrun Clear Flag */ +#define USART_ICR_CMCF_Pos (17U) +#define USART_ICR_CMCF_Msk (0x1UL << USART_ICR_CMCF_Pos) /*!< 0x00020000 */ +#define USART_ICR_CMCF USART_ICR_CMCF_Msk /*!< Character Match Clear Flag */ +#define USART_ICR_WUCF_Pos (20U) +#define USART_ICR_WUCF_Msk (0x1UL << USART_ICR_WUCF_Pos) /*!< 0x00100000 */ +#define USART_ICR_WUCF USART_ICR_WUCF_Msk /*!< Wake Up from stop mode Clear Flag */ + +/******************* Bit definition for USART_RDR register ******************/ +#define USART_RDR_RDR_Pos (0U) +#define USART_RDR_RDR_Msk (0x01FFUL << USART_RDR_RDR_Pos) /*!< 0x000001FF */ +#define USART_RDR_RDR USART_RDR_RDR_Msk /*!< RDR[8:0] bits (Receive Data value) */ + +/******************* Bit definition for USART_TDR register ******************/ +#define USART_TDR_TDR_Pos (0U) +#define USART_TDR_TDR_Msk (0x01FFUL << USART_TDR_TDR_Pos) /*!< 0x000001FF */ +#define USART_TDR_TDR USART_TDR_TDR_Msk /*!< TDR[8:0] bits (Transmit Data value) */ + +/******************* Bit definition for USART_PRESC register ******************/ +#define USART_PRESC_PRESCALER_Pos (0U) +#define USART_PRESC_PRESCALER_Msk (0xFUL << USART_PRESC_PRESCALER_Pos) /*!< 0x0000000F */ +#define USART_PRESC_PRESCALER USART_PRESC_PRESCALER_Msk /*!< PRESCALER[3:0] bits (Clock prescaler) */ +#define USART_PRESC_PRESCALER_0 (0x1U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000001 */ +#define USART_PRESC_PRESCALER_1 (0x2U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000002 */ +#define USART_PRESC_PRESCALER_2 (0x4U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000004 */ +#define USART_PRESC_PRESCALER_3 (0x8U << USART_PRESC_PRESCALER_Pos) /*!< 0x00000008 */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T_Pos (0U) +#define WWDG_CR_T_Msk (0x7FUL << WWDG_CR_T_Pos) /*!< 0x0000007F */ +#define WWDG_CR_T WWDG_CR_T_Msk /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T_0 (0x01U << WWDG_CR_T_Pos) /*!< 0x00000001 */ +#define WWDG_CR_T_1 (0x02U << WWDG_CR_T_Pos) /*!< 0x00000002 */ +#define WWDG_CR_T_2 (0x04U << WWDG_CR_T_Pos) /*!< 0x00000004 */ +#define WWDG_CR_T_3 (0x08U << WWDG_CR_T_Pos) /*!< 0x00000008 */ +#define WWDG_CR_T_4 (0x10U << WWDG_CR_T_Pos) /*!< 0x00000010 */ +#define WWDG_CR_T_5 (0x20U << WWDG_CR_T_Pos) /*!< 0x00000020 */ +#define WWDG_CR_T_6 (0x40U << WWDG_CR_T_Pos) /*!< 0x00000040 */ + +#define WWDG_CR_WDGA_Pos (7U) +#define WWDG_CR_WDGA_Msk (0x1UL << WWDG_CR_WDGA_Pos) /*!< 0x00000080 */ +#define WWDG_CR_WDGA WWDG_CR_WDGA_Msk /*!<Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W_Pos (0U) +#define WWDG_CFR_W_Msk (0x7FUL << WWDG_CFR_W_Pos) /*!< 0x0000007F */ +#define WWDG_CFR_W WWDG_CFR_W_Msk /*!<W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W_0 (0x01U << WWDG_CFR_W_Pos) /*!< 0x00000001 */ +#define WWDG_CFR_W_1 (0x02U << WWDG_CFR_W_Pos) /*!< 0x00000002 */ +#define WWDG_CFR_W_2 (0x04U << WWDG_CFR_W_Pos) /*!< 0x00000004 */ +#define WWDG_CFR_W_3 (0x08U << WWDG_CFR_W_Pos) /*!< 0x00000008 */ +#define WWDG_CFR_W_4 (0x10U << WWDG_CFR_W_Pos) /*!< 0x00000010 */ +#define WWDG_CFR_W_5 (0x20U << WWDG_CFR_W_Pos) /*!< 0x00000020 */ +#define WWDG_CFR_W_6 (0x40U << WWDG_CFR_W_Pos) /*!< 0x00000040 */ + +#define WWDG_CFR_WDGTB_Pos (11U) +#define WWDG_CFR_WDGTB_Msk (0x7UL << WWDG_CFR_WDGTB_Pos) /*!< 0x00003800 */ +#define WWDG_CFR_WDGTB WWDG_CFR_WDGTB_Msk /*!<WDGTB[2:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB_0 (0x1U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000800 */ +#define WWDG_CFR_WDGTB_1 (0x2U << WWDG_CFR_WDGTB_Pos) /*!< 0x00001000 */ +#define WWDG_CFR_WDGTB_2 (0x4U << WWDG_CFR_WDGTB_Pos) /*!< 0x00002000 */ + +#define WWDG_CFR_EWI_Pos (9U) +#define WWDG_CFR_EWI_Msk (0x1UL << WWDG_CFR_EWI_Pos) /*!< 0x00000200 */ +#define WWDG_CFR_EWI WWDG_CFR_EWI_Msk /*!<Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF_Pos (0U) +#define WWDG_SR_EWIF_Msk (0x1UL << WWDG_SR_EWIF_Pos) /*!< 0x00000001 */ +#define WWDG_SR_EWIF WWDG_SR_EWIF_Msk /*!<Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ +/******************** Bit definition for DBGMCU_IDCODE register *************/ +#define DBGMCU_IDCODE_DEV_ID_Pos (0U) +#define DBGMCU_IDCODE_DEV_ID_Msk (0xFFFUL << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ +#define DBGMCU_IDCODE_DEV_ID DBGMCU_IDCODE_DEV_ID_Msk +#define DBGMCU_IDCODE_REV_ID_Pos (16U) +#define DBGMCU_IDCODE_REV_ID_Msk (0xFFFFUL << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ +#define DBGMCU_IDCODE_REV_ID DBGMCU_IDCODE_REV_ID_Msk + +/******************** Bit definition for DBGMCU_CR register *****************/ +#define DBGMCU_CR_DBG_SLEEP_Pos (0U) +#define DBGMCU_CR_DBG_SLEEP_Msk (0x1UL << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */ +#define DBGMCU_CR_DBG_SLEEP DBGMCU_CR_DBG_SLEEP_Msk +#define DBGMCU_CR_DBG_STOP_Pos (1U) +#define DBGMCU_CR_DBG_STOP_Msk (0x1UL << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */ +#define DBGMCU_CR_DBG_STOP DBGMCU_CR_DBG_STOP_Msk +#define DBGMCU_CR_DBG_STANDBY_Pos (2U) +#define DBGMCU_CR_DBG_STANDBY_Msk (0x1UL << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ +#define DBGMCU_CR_DBG_STANDBY DBGMCU_CR_DBG_STANDBY_Msk +#define DBGMCU_CR_TRACE_IOEN_Pos (5U) +#define DBGMCU_CR_TRACE_IOEN_Msk (0x1UL << DBGMCU_CR_TRACE_IOEN_Pos) /*!< 0x00000020 */ +#define DBGMCU_CR_TRACE_IOEN DBGMCU_CR_TRACE_IOEN_Msk +#define DBGMCU_CR_TRGOEN_Pos (28U) +#define DBGMCU_CR_TRGOEN_Msk (0x1UL << DBGMCU_CR_TRGOEN_Pos) /*!< 0x10000000 */ +#define DBGMCU_CR_TRGOEN DBGMCU_CR_TRGOEN_Msk + +/******************** Bit definition for DBGMCU_APB1FZR1 register ***********/ +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP_Pos (0U) +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */ +#define DBGMCU_APB1FZR1_DBG_TIM2_STOP DBGMCU_APB1FZR1_DBG_TIM2_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_RTC_STOP_Pos (10U) +#define DBGMCU_APB1FZR1_DBG_RTC_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBGMCU_APB1FZR1_DBG_RTC_STOP DBGMCU_APB1FZR1_DBG_RTC_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP_Pos (11U) +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_WWDG_STOP_Pos) /*!< 0x00000800 */ +#define DBGMCU_APB1FZR1_DBG_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP_Pos (12U) +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBGMCU_APB1FZR1_DBG_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP_Pos (21U) +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */ +#define DBGMCU_APB1FZR1_DBG_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP_Msk +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Pos (31U) +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Msk (0x1UL << DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Pos) /*!< 0x80000000 */ +#define DBGMCU_APB1FZR1_DBG_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB1FZR1 register ***********/ +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Pos (0U) +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Pos) /*!< 0x00000001 */ +#define DBGMCU_C2APB1FZR1_DBG_TIM2_STOP DBGMCU_C2APB1FZR1_DBG_TIM2_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Pos (10U) +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Pos) /*!< 0x00000400 */ +#define DBGMCU_C2APB1FZR1_DBG_RTC_STOP DBGMCU_C2APB1FZR1_DBG_RTC_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Pos (12U) +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Pos) /*!< 0x00001000 */ +#define DBGMCU_C2APB1FZR1_DBG_IWDG_STOP DBGMCU_C2APB1FZR1_DBG_IWDG_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Pos (21U) +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Pos) /*!< 0x00200000 */ +#define DBGMCU_C2APB1FZR1_DBG_I2C1_STOP DBGMCU_C2APB1FZR1_DBG_I2C1_STOP_Msk +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Pos (31U) +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Pos) /*!< 0x80000000 */ +#define DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP DBGMCU_C2APB1FZR1_DBG_LPTIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_APB1FZR2 register ***********/ +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Pos (5U) +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Msk (0x1UL << DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Pos) /*!< 0x00000020 */ +#define DBGMCU_APB1FZR2_DBG_LPTIM2_STOP DBGMCU_APB1FZR2_DBG_LPTIM2_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB1FZR2 register ***********/ +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Pos (5U) +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Msk (0x1UL << DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Pos) /*!< 0x00000020 */ +#define DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP DBGMCU_C2APB1FZR2_DBG_LPTIM2_STOP_Msk + +/******************** Bit definition for DBGMCU_APB2FZR register ************/ +#define DBGMCU_APB2FZR_DBG_TIM1_STOP_Pos (11U) +#define DBGMCU_APB2FZR_DBG_TIM1_STOP_Msk (0x1UL << DBGMCU_APB2FZR_DBG_TIM1_STOP_Pos) /*!< 0x000000800 */ +#define DBGMCU_APB2FZR_DBG_TIM1_STOP DBGMCU_APB2FZR_DBG_TIM1_STOP_Msk + +/******************** Bit definition for DBGMCU_C2APB2FZR register ************/ +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Pos (11U) +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Msk (0x1UL << DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Pos) /*!< 0x000000800 */ +#define DBGMCU_C2APB2FZR_DBG_TIM1_STOP DBGMCU_C2APB2FZR_DBG_TIM1_STOP_Msk + +/** @addtogroup Exported_macros + * @{ + */ + + +/*********************** UART Instances : Asynchronous mode *******************/ +#define IS_UART_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : FIFO mode ***************************/ +#define IS_UART_FIFO_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == LPUART1)) + +/*********************** UART Instances : SPI Slave mode **********************/ +#define IS_UART_SPI_SLAVE_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** USART Instances : Synchronous mode *******************/ +#define IS_USART_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** USART Instances : Auto Baud Rate detection ***********/ + +#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Half-Duplex mode ********************/ +#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == LPUART1)) + +/*********************** UART Instances : LIN mode ****************************/ +#define IS_UART_LIN_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Wake-up from Stop mode **************/ +#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == LPUART1)) + +/*********************** UART Instances : Hardware Flow control ***************/ +#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == LPUART1)) + +/*********************** UART Instances : Smard card mode *********************/ +#define IS_SMARTCARD_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/*********************** UART Instances : Driver Enable ***********************/ +#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1)|| \ + ((INSTANCE) == LPUART1)) + +/*********************** UART Instances : IRDA mode ***************************/ +#define IS_IRDA_INSTANCE(INSTANCE) ((INSTANCE) == USART1) + +/******************** LPUART Instance *****************************************/ +#define IS_LPUART_INSTANCE(INSTANCE) ((INSTANCE) == LPUART1) + +/******************************* ADC Instances ********************************/ +#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) + +#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC1_COMMON) + +/******************************* AES Instances ********************************/ +#define IS_AES_ALL_INSTANCE(INSTANCE) ((INSTANCE) == AES2) + +/******************************** COMP Instances ******************************/ +#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1)) + +#define IS_COMP_COMMON_INSTANCE(INSTANCE) (0U) + +/******************** COMP Instances with window mode capability **************/ +#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) (0U) + +/******************************* CRC Instances ********************************/ +#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC) + +/******************************** DMA Instances *******************************/ +#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \ + ((INSTANCE) == DMA1_Channel2) || \ + ((INSTANCE) == DMA1_Channel3) || \ + ((INSTANCE) == DMA1_Channel4) || \ + ((INSTANCE) == DMA1_Channel5) || \ + ((INSTANCE) == DMA1_Channel6) || \ + ((INSTANCE) == DMA1_Channel7)) + +/******************************** DMAMUX Instances ****************************/ +#define IS_DMAMUX_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DMAMUX1) + +#define IS_DMAMUX_REQUEST_GEN_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMAMUX1_RequestGenerator0) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator1) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator2) || \ + ((INSTANCE) == DMAMUX1_RequestGenerator3)) + +/******************************* GPIO Instances *******************************/ +#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ + ((INSTANCE) == GPIOB) || \ + ((INSTANCE) == GPIOC) || \ + ((INSTANCE) == GPIOE) || \ + ((INSTANCE) == GPIOH)) + +/******************************* GPIO AF Instances ****************************/ +#define IS_GPIO_AF_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) + +/**************************** GPIO Lock Instances *****************************/ +#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) + +/******************************** I2C Instances *******************************/ +#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1) + +/****************** I2C Instances : wakeup capability from stop modes *********/ +#define IS_I2C_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE) + +/******************************* SMBUS Instances ******************************/ +#define IS_SMBUS_ALL_INSTANCE(INSTANCE) IS_I2C_ALL_INSTANCE(INSTANCE) + +/******************************* IPCC Instances ********************************/ +#define IS_IPCC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IPCC) + +/******************************** HSEM Instances *******************************/ +#define IS_HSEM_ALL_INSTANCE(INSTANCE) ((INSTANCE) == HSEM) + +#define HSEM_CPU1_COREID (0x00000004UL)/* Semaphore Core ID */ +#define HSEM_CPU2_COREID (0x00000008UL)/* Semaphore Core ID */ + +#define HSEM_SEMID_MIN (0U) /* HSEM ID Min*/ +#define HSEM_SEMID_MAX (31U) /* HSEM ID Max */ + +#define HSEM_PROCESSID_MIN (0U) /* HSEM Process ID Min */ +#define HSEM_PROCESSID_MAX (255U) /* HSEM Process ID Max */ + +#define HSEM_CLEAR_KEY_MIN (0U) /* HSEM clear Key Min value */ +#define HSEM_CLEAR_KEY_MAX (0xFFFFU) /* HSEM clear Key Max value */ + +/******************************** PKA Instances *******************************/ +#define IS_PKA_ALL_INSTANCE(INSTANCE) ((INSTANCE) == PKA) + +/******************************* RNG Instances ********************************/ +#define IS_RNG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RNG) + +/****************************** RTC Instances *********************************/ +#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC) + +/******************************** SPI Instances *******************************/ +#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1) + +/****************** LPTIM Instances : All supported instances *****************/ +#define IS_LPTIM_INSTANCE(INSTANCE) (((INSTANCE) == LPTIM1) || \ + ((INSTANCE) == LPTIM2)) + +/****************** LPTIM Instances : Encoder mode ****************************/ +#define IS_LPTIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) ((INSTANCE) == LPTIM1) + +/****************** TIM Instances : All supported instances *******************/ +#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************************** IWDG Instances ********************************/ +#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG) + +/****************************** WWDG Instances ********************************/ +#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG) + +/****************** TIM Instances : supporting 32 bits counter ****************/ +#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM2) + +/****************** TIM Instances : supporting the break function *************/ +#define IS_TIM_BREAK_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************** TIM Instances : supporting Break source selection *************/ +#define IS_TIM_BREAKSOURCE_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting 2 break inputs *****************/ +#define IS_TIM_BKIN2_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************* TIM Instances : at least 1 capture/compare channel *************/ +#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 2 capture/compare channels *************/ +#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 3 capture/compare channels *************/ +#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : at least 4 capture/compare channels *************/ +#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : at least 5 capture/compare channels *******/ +#define IS_TIM_CC5_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : at least 6 capture/compare channels *******/ +#define IS_TIM_CC6_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/************ TIM Instances : DMA requests generation (TIMx_DIER.COMDE) *******/ +#define IS_TIM_CCDMA_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : DMA requests generation (TIMx_DIER.UDE) ***/ +#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : DMA requests generation (TIMx_DIER.CCxDE) *******/ +#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************** TIM Instances : DMA burst feature ***********************/ +#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************* TIM Instances : Timer input selection ********************/ +#define IS_TIM_TISEL_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/******************* TIM Instances : output(s) available **********************/ +#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \ + ((((INSTANCE) == TIM1) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4) || \ + ((CHANNEL) == TIM_CHANNEL_5) || \ + ((CHANNEL) == TIM_CHANNEL_6))) \ + || \ + (((INSTANCE) == TIM2) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4)))) + +/****************** TIM Instances : supporting complementary output(s) ********/ +#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \ + (((INSTANCE) == TIM1) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3))) + +/****************** TIM Instances : supporting clock division *****************/ +#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : supporting external clock mode 1 for ETRF input *******/ +#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : supporting external clock mode 2 for ETRF input *******/ +#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/ +#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/ +#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting combined 3-phase PWM mode ******/ +#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting commutation event generation ***/ +#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting counting mode selection ********/ +#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting encoder interface **************/ +#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting Hall sensor interface **********/ +#define IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/**************** TIM Instances : external trigger input available ************/ +#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************* TIM Instances : supporting ETR source selection ***************/ +#define IS_TIM_ETRSEL_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****** TIM Instances : Master mode available (TIMx_CR2.MMS available )********/ +#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/ +#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting OCxREF clear *******************/ +#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : remapping capability **********************/ +#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/****************** TIM Instances : supporting repetition counter *************/ +#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/ +#define IS_TIM_TRGO2_INSTANCE(INSTANCE) ((INSTANCE) == TIM1) + +/******************* TIM Instances : Timer input XOR function *****************/ +#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \ + ((INSTANCE) == TIM2)) + +/************ TIM Instances : Advanced timers ********************************/ +#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) (((INSTANCE) == TIM1)) + +/****************************** TSC Instances *********************************/ +#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC) + +/** + * @} + */ + + /** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32WB15xx_H */ + +/** + * @} + */ + + /** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb30xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb30xx.h index e8d0f902c7..5142db18ab 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb30xx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb30xx.h @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb35xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb35xx.h index 7875b2d7ba..0efbdbb0ed 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb35xx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb35xx.h @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -3469,9 +3469,6 @@ typedef struct #define EXTI_IMR2_IM42_Pos (10U) #define EXTI_IMR2_IM42_Msk (0x1UL << EXTI_IMR2_IM42_Pos) /*!< 0x00000400 */ #define EXTI_IMR2_IM42 EXTI_IMR2_IM42_Msk /*!< CPU1 Interrupt Mask on line 42 */ -#define EXTI_IMR2_IM43_Pos (11U) -#define EXTI_IMR2_IM43_Msk (0x1UL << EXTI_IMR2_IM43_Pos) /*!< 0x00000800 */ -#define EXTI_IMR2_IM43 EXTI_IMR2_IM43_Msk /*!< CPU1 Interrupt Mask on line 43 */ #define EXTI_IMR2_IM44_Pos (12U) #define EXTI_IMR2_IM44_Msk (0x1UL << EXTI_IMR2_IM44_Pos) /*!< 0x00001000 */ #define EXTI_IMR2_IM44 EXTI_IMR2_IM44_Msk /*!< CPU1 Interrupt Mask on line 44 */ @@ -3687,9 +3684,6 @@ typedef struct #define EXTI_C2IMR2_IM42_Pos (10U) #define EXTI_C2IMR2_IM42_Msk (0x1UL << EXTI_C2IMR2_IM42_Pos) /*!< 0x00000400 */ #define EXTI_C2IMR2_IM42 EXTI_C2IMR2_IM42_Msk /*!< CPU2 Interrupt Mask on line 42 */ -#define EXTI_C2IMR2_IM43_Pos (11U) -#define EXTI_C2IMR2_IM43_Msk (0x1UL << EXTI_C2IMR2_IM43_Pos) /*!< 0x00000800 */ -#define EXTI_C2IMR2_IM43 EXTI_C2IMR2_IM43_Msk /*!< CPU2 Interrupt Mask on line 43 */ #define EXTI_C2IMR2_IM44_Pos (12U) #define EXTI_C2IMR2_IM44_Msk (0x1UL << EXTI_C2IMR2_IM44_Pos) /*!< 0x00001000 */ #define EXTI_C2IMR2_IM44 EXTI_C2IMR2_IM44_Msk /*!< CPU2 Interrupt Mask on line 44 */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb50xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb50xx.h index 62a4b34243..fc90159751 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb50xx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb50xx.h @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -6347,9 +6347,6 @@ typedef struct #define RCC_CR_HSERDY_Pos (17U) #define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ #define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed oscillator (HSE) clock ready */ -#define RCC_CR_HSEBYP_Pos (18U) -#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ -#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed oscillator (HSE) clock bypass */ #define RCC_CR_CSSON_Pos (19U) #define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ #define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< HSE Clock Security System enable */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h index 198050f684..be324d89f3 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb55xx.h @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -7325,9 +7325,6 @@ typedef struct #define RCC_CR_HSERDY_Pos (17U) #define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ #define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed oscillator (HSE) clock ready */ -#define RCC_CR_HSEBYP_Pos (18U) -#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ -#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed oscillator (HSE) clock bypass */ #define RCC_CR_CSSON_Pos (19U) #define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ #define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< HSE Clock Security System enable */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb5mxx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb5mxx.h index 0e76353273..1a84e7a182 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb5mxx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wb5mxx.h @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -7325,9 +7325,6 @@ typedef struct #define RCC_CR_HSERDY_Pos (17U) #define RCC_CR_HSERDY_Msk (0x1UL << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ #define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed oscillator (HSE) clock ready */ -#define RCC_CR_HSEBYP_Pos (18U) -#define RCC_CR_HSEBYP_Msk (0x1UL << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ -#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed oscillator (HSE) clock bypass */ #define RCC_CR_CSSON_Pos (19U) #define RCC_CR_CSSON_Msk (0x1UL << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ #define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< HSE Clock Security System enable */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h index 0b0a72a9b0..5c38a1b95e 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h @@ -19,10 +19,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -69,7 +69,7 @@ * @brief CMSIS Device version number */ #define __STM32WBxx_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32WBxx_CMSIS_VERSION_SUB1 (0x06U) /*!< [23:16] sub1 version */ +#define __STM32WBxx_CMSIS_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ #define __STM32WBxx_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ #define __STM32WBxx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32WBxx_CMSIS_DEVICE_VERSION ((__STM32WBxx_CMSIS_VERSION_MAIN << 24)\ @@ -95,6 +95,10 @@ #include "stm32wb35xx.h" #elif defined(STM32WB30xx) #include "stm32wb30xx.h" +#elif defined(STM32WB15xx) + #include "stm32wb15xx.h" +#elif defined(STM32WB10xx) + #include "stm32wb10xx.h" #else #error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)" #endif diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h index d39c1648ac..28124b1338 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h @@ -9,10 +9,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -64,7 +64,7 @@ extern const uint32_t AHBPrescTable[16]; /*!< AHB prescalers table values */ extern const uint32_t APBPrescTable[8]; /*!< APB prescalers table values */ extern const uint32_t MSIRangeTable[16]; /*!< MSI ranges table values */ -#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) +#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) || defined (STM32WB10xx) extern const uint32_t SmpsPrescalerTable[4][6]; /*!< SMPS factor ranges table values */ #endif /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Release_Notes.html b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Release_Notes.html new file mode 100644 index 0000000000..88465b7ebd --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Release_Notes.html @@ -0,0 +1,327 @@ +<!DOCTYPE html> +<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> +<head> + <meta charset="utf-8" /> + <meta name="generator" content="pandoc" /> + <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" /> + <title>Release Notes for STM32WBxx CMSIS</title> + <style type="text/css"> + code{white-space: pre-wrap;} + span.smallcaps{font-variant: small-caps;} + span.underline{text-decoration: underline;} + div.column{display: inline-block; vertical-align: top; width: 50%;} + </style> + <link rel="stylesheet" href="./_htmresc/mini-st.css" /> + <!--[if lt IE 9]> + <script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script> + <![endif]--> +</head> +<body> +<div class="row"> +<div class="col-sm-12 col-lg-4"> +<div class="card fluid"> +<div class="sectione dark"> +<center> +<h1 id="release-notes-for-stm32wbxx-cmsis"><small>Release Notes for</small> STM32WBxx CMSIS</h1> +<p>Copyright © 2019 STMicroelectronics<br /> +</p> +<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a> +</center> +</div> +</div> +<h1 id="license">License</h1> +<p>This software component is licensed by ST under Apache-2.0 license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:</p> +<p><a href="https://opensource.org/licenses/Apache-2.0">Apache-2.0</a></p> +<h1 id="purpose">Purpose</h1> +<p>This driver provides the CMSIS device for the stm32wbxx products. This covers</p> +<ul> +<li>STM32WB55xx devices</li> +<li>STM32WB5Mxx devices</li> +<li>STM32WB50xx devices</li> +<li>STM32WB35xx devices</li> +<li>STM32WB30xx devices</li> +<li>STM32WB15xx devices</li> +<li>STM32WB10xx devices</li> +</ul> +<p>This driver is composed of the descriptions of the registers under “Include” directory.</p> +<p>Various template file are provided to easily build an application. They can be adapted to fit applications requirements.</p> +<ul> +<li>Templates/system_stm32wbxx.c contains the initialization code referred as SystemInit.</li> +<li>Startup files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +<li>Linker files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +</ul> +<h1 id="specific-consideration-for-available-flash-size-inside-linker-file">Specific consideration for available FLASH size inside linker file</h1> +<p>The available flash size depends on the wireless binary used inside the STM32WB device.</p> +<p>The linker files templates for IAR, KEIL and GCC provide example of implementation which can be tuned.</p> +<p>You can refer to the below chapters to optimize the usage of the flash on your device.</p> +<h2 id="stm32wb55xx-stm32wb50xx-and-stm32wb5m">STM32WB55xx, STM32WB50xx and STM32WB5M</h2> +<p>The default linker file provided in “/Drivers/CMSIS/DeviceST/STM32WBxx/Source/Templates” allows the application to use 512KB of flash.</p> +<p>The maximum flash memory that can be used by the application is up to the Secure Flash Start Address (SFSA) that can be read from the option byte.</p> +<p>The __ICFEDIT_region_ROM_end__ in the linker can be modified with a value up to : (0x08000000 + (SFSA << 12)) - 1.</p> +<p>Example:</p> +<ul> +<li>When the SFSA option byte is set to 0xA0, the maximum value to be used for __ICFEDIT_region_ROM_end is 0x0809FFFF which is 640KB of flash.</li> +</ul> +<p>Note:</p> +<ul> +<li>The SFSA option byte can only be set by the CPU2. The user cannot modify that value.</li> +</ul> +<h2 id="stm32wb35xx-and-stm32wb30xx">STM32WB35xx and STM32WB30xx</h2> +<p>The default linker file provided in "/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates allows the application to use 120KB of flash.</p> +<p>The maximum flash memory that can be used by the application is up to the Secure Flash Start Address (SFSA) that can be read from the option byte.</p> +<p>The __ICFEDIT_region_ROM_end__ in the linker can be modified with a value up to : (0x08000000 + (SFSA << 12)) - 1.</p> +<p>Example:</p> +<ul> +<li>When the SFSA option byte is set to 0x32, the maximum value to be used for __ICFEDIT_region_ROM_end is 0x08031FFF – which is 200KB of flash</li> +</ul> +<p>Note:</p> +<ul> +<li>The SFSA option byte can only be set by the CPU2. The user cannot modify that value.</li> +</ul> +<h2 id="stm32wb15xx-and-stm32wb10xx">STM32WB15xx and STM32WB10xx</h2> +<p>The default linker file provided in "/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates allows the application to use 110KB of flash.</p> +<p>The maximum flash memory that can be used by the application is up to the Secure Flash Start Address (SFSA) that can be read from the option byte.</p> +<p>The __ICFEDIT_region_ROM_end__ in the linker can be modified with a value up to : (0x08000000 + (SFSA << 11)) - 1 considering minimum CPU secure area size is one sector (2kBytes).</p> +<p>Example:</p> +<ul> +<li>When the SFSA option byte is set to 0x37, the maximum value to be used for __ICFEDIT_region_ROM_end is 0x0801B800 – which is 110kB of flash</li> +</ul> +<p>Note:</p> +<ul> +<li>The SFSA option byte can only be set by the CPU2. The user cannot modify that value.</li> +</ul> +</div> +<div class="col-sm-12 col-lg-8"> +<h1 id="update-history">Update History</h1> +<div class="collapse"> +<input type="checkbox" id="collapse-section8" checked aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">v1.8.0 / 09-February-2021</label> +<div> +<h2 id="main-changes">Main Changes</h2> +<h3 id="add-support-for-stm32wb15xx-and-stm32wb10xx">Add support for STM32WB15xx and STM32WB10xx</h3> +<ul> +<li>Change how to adapt VTOR for user</li> +</ul> +<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx, STM32WB5Mxx, STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx and STM32WB10xx devices.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">v1.7.0 / 30-October-2020</label> +<div> +<h2 id="main-changes-1">Main Changes</h2> +<h3 id="maintenance-release">Maintenance release</h3> +<p>Maintenance release for <strong>STM32WBxx</strong> devices (stm32wb55xx, stm32wb50xx, stm32wb35xx and stm32wb30xx devices)</p> +<table> +<thead> +<tr class="header"> +<th style="text-align: left;">Fixed bugs headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td style="text-align: left;">[STM32WB35] Remove EXTI_C2IMR2_IM43 and EXTI_IMR2_IM43</td> +</tr> +<tr class="even"> +<td style="text-align: left;">[STM32WB50] Remove RCC_CR_HSEBYP</td> +</tr> +<tr class="odd"> +<td style="text-align: left;">[STM32WB55] Remove RCC_CR_HSEBYP</td> +</tr> +<tr class="even"> +<td style="text-align: left;">[STM32WB5M] Remove RCC_CR_HSEBYP</td> +</tr> +</tbody> +</table> +<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards-1">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx, STM32WB5Mxx, STM32WB50xx, STM32WB35xx and STM32WB30xx devices.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">v1.6.0 / 05-June-2020</label> +<div> +<h2 id="main-changes-2">Main Changes</h2> +<h3 id="maintenance-release-1">Maintenance release</h3> +<p>Maintenance release for <strong>STM32WBxx</strong> devices (stm32wb55xx, stm32wb50xx, stm32wb35xx and stm32wb30xx devices)</p> +<table> +<thead> +<tr class="header"> +<th style="text-align: left;">Fixed bugs headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td style="text-align: left;">[All devices] Correct DMAMUX_CxCR_DMAREQ_ID_Msk</td> +</tr> +<tr class="even"> +<td style="text-align: left;">[All devices] Remove DMAMUX_CxCR_DMAREQ_ID_[6-7]</td> +</tr> +<tr class="odd"> +<td style="text-align: left;">[All devices] Call SystemInit first in startup/Reset_Handler, so GCC code is similar to IAR/Keil</td> +</tr> +<tr class="even"> +<td style="text-align: left;">[STM32WB50xx and STM32WB30xx] Remove OR register from LPTIM_TypeDef</td> +</tr> +<tr class="odd"> +<td style="text-align: left;">[STM32WB50xx and STM32WB30xx] Remove DMAMUX_CSR_SOF[7-13] and DMAMUX_CFR_SOF[7-13]</td> +</tr> +<tr class="even"> +<td style="text-align: left;">[STM32WB50xx and STM32WB30xx] Remove EXTI_RTSR1_RTxx_Pos [20, 21 and 31]</td> +</tr> +<tr class="odd"> +<td style="text-align: left;">[STM32WB50xx and STM32WB30xx] Remove TIM2_OR_TI4_RMP, TIM2_OR_ITR1_RMP and LPTIM_OR_OR</td> +</tr> +</tbody> +</table> +<h2 id="development-toolchains-and-compilers-2">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards-2">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx, STM32WB5Mxx, STM32WB50xx, STM32WB35xx and STM32WB30xx devices.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">v1.4.0 / 12-February-2020</label> +<div> +<h2 id="main-changes-3">Main Changes</h2> +<h3 id="introduction-of-stm32wb35xx-stm32wb30xx-and-stm32wb5mxx-product">Introduction of STM32WB35xx, STM32WB30xx and STM32WB5Mxx product</h3> +<p>This release introduce the support of STM32WB5Mxx, STM32WB35xx product and its value line STM32WB30xx.</p> +<p>Added features:</p> +<ul> +<li>Templates/system_stm32wbxx.c contains the initialization code referred as SystemInit.</li> +<li>Startup files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +<li>Linker files are provided as example for IAR©, KEIL© and SW4STM32©.</li> +<li>The product STM32WB5Mxx is supported by enabling inside your project the define “STM32WB5Mxx”.</li> +<li>The product STM32WB35xx is supported by enabling inside your project the define “STM32WB35xx”.</li> +<li>The product STM32WB30xx is supported by enabling inside your project the define “STM32WB30xx”.</li> +</ul> +<h2 id="development-toolchains-and-compilers-3">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards-3">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx, STM32WB5Mxx, STM32WB50xx, STM32WB35xx and STM32WB30xx devices.</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">v1.3.0 / 11-September-2019</label> +<div> +<h2 id="main-changes-4">Main Changes</h2> +<p>Maintenance release for <strong>STM32WBxx</strong> devices (stm32wb55xx and stm32wb50xx devices)</p> +<table> +<thead> +<tr class="header"> +<th style="text-align: left;">Fixed bugs headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td style="text-align: left;">Remove IS_TIM_SYNCHRO_INSTANCE macro from CMSIS</td> +</tr> +<tr class="even"> +<td style="text-align: left;">Move FLASH_SIZE define from hal flash. h to cmsis device file</td> +</tr> +<tr class="odd"> +<td style="text-align: left;">Correct size of .bin files generated by SW4STM32</td> +</tr> +<tr class="even"> +<td style="text-align: left;">Remove RCC_PLLSAI_SUPPORT for STM32WB50</td> +</tr> +</tbody> +</table> +<h2 id="development-toolchains-and-compilers-4">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards-4">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx, STM32WB50xx devices</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.2.0 / 26-June-2019</label> +<div> +<h2 id="main-changes-5">Main Changes</h2> +<h3 id="introduction-of-stm32wb50xx-device">Introduction of STM32WB50xx device</h3> +<p>First release for STM32WBxx CMSIS introducing <strong>stm32wb50xx</strong> devices.</p> +<h2 id="contents">Contents</h2> +<p>CMSIS devices files for stm32wb55xx, stm32wb50xx devices.</p> +<h2 id="development-toolchains-and-compilers-5">Development Toolchains and Compilers</h2> +<ul> +<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li> +<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li> +<li>System Workbench STM32 (SW4STM32) toolchain V2.7</li> +</ul> +<h2 id="supported-devices-and-boards-5">Supported Devices and boards</h2> +<ul> +<li>STM32WB55xx and STM32WB50xx devices</li> +</ul> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 05-April-2019</label> +<div> +<h2 id="main-changes-6">Main Changes</h2> +<h3 id="maintenance-release-2">Maintenance release</h3> +<p>Maintenance release for <strong>STM32WBxx</strong> devices (stm32wb55xx devices)</p> +<table> +<caption>Fixed bugs list</caption> +<thead> +<tr class="header"> +<th>Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>Correct GCC linker file: Set available size of RAM1 to 192K - 4 instead of 191K.</td> +</tr> +<tr class="even"> +<td>Set FLASH_ACR_LATENCY_x as uint32_t (UL instead of U).</td> +</tr> +</tbody> +</table> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 06-February-2019</label> +<div> +<h2 id="main-changes-7">Main Changes</h2> +<h3 id="first-release">First release</h3> +<p>Add support of STM32WB55xx.</p> +</div> +</div> +</div> +</div> +<footer class="sticky"> +<p>For complete documentation on STM32WBxx, visit: [<a href="http://www.st.com/stm32wb">www.st.com/stm32wb</a>]</p> +<em>This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.</em> +</footer> +</body> +</html> diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb10xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb10xx_flash_cm4.sct new file mode 100644 index 0000000000..58f9569535 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb10xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x0001B800 { ; load region size_region
+ ER_IROM1 0x08000000 0x0001B800 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x2FFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb15xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb15xx_flash_cm4.sct new file mode 100644 index 0000000000..58f9569535 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb15xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x0001B800 { ; load region size_region
+ ER_IROM1 0x08000000 0x0001B800 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x2FFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb30xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb30xx_flash_cm4.sct new file mode 100644 index 0000000000..2d94974baf --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb30xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00040000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00040000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x7FFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb35xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb35xx_flash_cm4.sct new file mode 100644 index 0000000000..2d94974baf --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb35xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00040000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00040000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x7FFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb50xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb50xx_flash_cm4.sct new file mode 100644 index 0000000000..0931c9db4b --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb50xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00080000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00080000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0xFFFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb55xx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb55xx_flash_cm4.sct new file mode 100644 index 0000000000..1e583584ed --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb55xx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00080000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00080000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x2FFFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb5mxx_flash_cm4.sct b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb5mxx_flash_cm4.sct new file mode 100644 index 0000000000..1e583584ed --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/linker/stm32wb5mxx_flash_cm4.sct @@ -0,0 +1,21 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00080000 { ; load region size_region
+ ER_IROM1 0x08000000 0x00080000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000004 0x2FFFC { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_RAM_SHARED 0x20030000 0x2800 { ; RW data
+ *(MAPPING_TABLE)
+ *(MB_MEM1)
+ *(MB_MEM2)
+ }
+ }
+
+
diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb10xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb10xx_cm4.s new file mode 100644 index 0000000000..9a267102a0 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb10xx_cm4.s @@ -0,0 +1,332 @@ +;****************************************************************************** +;* File Name : startup_stm32wb10xx_cm4.s +;* Author : MCD Application Team +;* Description : STM32WB10xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under Apache License, Version 2.0, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/Apache-2.0 +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Communication Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT AES1_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +C2SEV_PWR_C2H_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +PWR_SOTF_BLEACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +AES1_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb15xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb15xx_cm4.s new file mode 100644 index 0000000000..1eb5f7f7f8 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb15xx_cm4.s @@ -0,0 +1,336 @@ +;****************************************************************************** +;* File Name : startup_stm32wb15xx_cm4.s +;* Author : MCD Application Team +;* Description : STM32WB15xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. All rights reserved. +;* +;* This software component is licensed by ST under Apache License, Version 2.0, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/Apache-2.0 +;* +;****************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM detector + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper and TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Communication Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_PVM_IRQHandler [WEAK] + EXPORT TAMP_STAMP_LSECSS_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT C2SEV_PWR_C2H_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT PKA_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT TSC_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT PWR_SOTF_BLEACT_RFPHASE_IRQHandler [WEAK] + EXPORT IPCC_C1_RX_IRQHandler [WEAK] + EXPORT IPCC_C1_TX_IRQHandler [WEAK] + EXPORT HSEM_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT AES1_IRQHandler [WEAK] + EXPORT AES2_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_PVM_IRQHandler +TAMP_STAMP_LSECSS_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +C2SEV_PWR_C2H_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +PKA_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +LPUART1_IRQHandler +TSC_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +PWR_SOTF_BLEACT_RFPHASE_IRQHandler +IPCC_C1_RX_IRQHandler +IPCC_C1_TX_IRQHandler +HSEM_IRQHandler +LPTIM1_IRQHandler +LPTIM2_IRQHandler +AES1_IRQHandler +AES2_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +DMAMUX1_OVR_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb30xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb30xx_cm4.s index 3d355081e6..9f29c25ab3 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb30xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb30xx_cm4.s @@ -16,10 +16,10 @@ ;* ;* Copyright (c) 2019 STMicroelectronics. All rights reserved. ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s index e4427753f9..183d404460 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb35xx_cm4.s @@ -16,10 +16,10 @@ ;* ;* Copyright (c) 2019 STMicroelectronics. All rights reserved. ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s index 9b47919f59..27b4914b39 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb50xx_cm4.s @@ -16,10 +16,10 @@ ;* ;* Copyright (c) 2019 STMicroelectronics. All rights reserved. ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb55xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb55xx_cm4.s index 821ad3c347..61fc19a49e 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb55xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb55xx_cm4.s @@ -16,10 +16,10 @@ ;* ;* Copyright (c) 2019 STMicroelectronics. All rights reserved. ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s index ced2754856..389f569e75 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/arm/startup_stm32wb5mxx_cm4.s @@ -16,10 +16,10 @@ ;* ;* Copyright (c) 2019 STMicroelectronics. All rights reserved. ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb10xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb10xx_flash_cm4.ld new file mode 100644 index 0000000000..f60eb6d484 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb10xx_flash_cm4.ld @@ -0,0 +1,179 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32WB15xC Device +** 320Kbytes FLASH +** 48Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** <h2><center>© Copyright (c) 2020 STMicroelectronics. +** All rights reserved.</center></h2> +** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20003000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400 ; /* required amount of heap */ +_Min_Stack_Size = 0x1000 ; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 110K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb15xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb15xx_flash_cm4.ld new file mode 100644 index 0000000000..f60eb6d484 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb15xx_flash_cm4.ld @@ -0,0 +1,179 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32WB15xC Device +** 320Kbytes FLASH +** 48Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** <h2><center>© Copyright (c) 2020 STMicroelectronics. +** All rights reserved.</center></h2> +** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20003000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400 ; /* required amount of heap */ +_Min_Stack_Size = 0x1000 ; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 110K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb30xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb30xx_flash_cm4.ld new file mode 100644 index 0000000000..aa2af33595 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb30xx_flash_cm4.ld @@ -0,0 +1,187 @@ +/** +***************************************************************************** +** +** File : stm32wb30xx_flash_cm4.ld +** +** Abstract : System Workbench Minimal System calls file +** +** For more information about which c-functions +** need which of these lowlevel functions +** please consult the Newlib libc-manual +** +** Environment : System Workbench for MCU +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** +** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20008000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x7FFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb35xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb35xx_flash_cm4.ld new file mode 100644 index 0000000000..72f6cf1696 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb35xx_flash_cm4.ld @@ -0,0 +1,187 @@ +/** +***************************************************************************** +** +** File : stm32wb35xx_flash_cm4.ld +** +** Abstract : System Workbench Minimal System calls file +** +** For more information about which c-functions +** need which of these lowlevel functions +** please consult the Newlib libc-manual +** +** Environment : System Workbench for MCU +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** +** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20008000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x7FFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb50xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb50xx_flash_cm4.ld new file mode 100644 index 0000000000..4b71b9be5e --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb50xx_flash_cm4.ld @@ -0,0 +1,187 @@ +/** +***************************************************************************** +** +** File : stm32wb50xx_flash_cm4.ld +** +** Abstract : System Workbench Minimal System calls file +** +** For more information about which c-functions +** need which of these lowlevel functions +** please consult the Newlib libc-manual +** +** Environment : System Workbench for MCU +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** +** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20010000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0xFFFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb55xx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb55xx_flash_cm4.ld new file mode 100644 index 0000000000..7ac9a391f1 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb55xx_flash_cm4.ld @@ -0,0 +1,187 @@ +/** +***************************************************************************** +** +** File : stm32wb55xx_flash_cm4.ld +** +** Abstract : System Workbench Minimal System calls file +** +** For more information about which c-functions +** need which of these lowlevel functions +** please consult the Newlib libc-manual +** +** Environment : System Workbench for MCU +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** +** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20030000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb5mxx_flash_cm4.ld b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb5mxx_flash_cm4.ld new file mode 100644 index 0000000000..96ad40d57c --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/linker/stm32wb5mxx_flash_cm4.ld @@ -0,0 +1,187 @@ +/** +***************************************************************************** +** +** File : stm32wb5mxx_flash_cm4.ld +** +** Abstract : System Workbench Minimal System calls file +** +** For more information about which c-functions +** need which of these lowlevel functions +** please consult the Newlib libc-manual +** +** Environment : System Workbench for MCU +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** +** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2> +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20030000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K +RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFFC +RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM1 AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM1 + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM1 + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } + MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED + MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED + MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED +} + + diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb10xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb10xx_cm4.s new file mode 100644 index 0000000000..870486aac0 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb10xx_cm4.s @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file startup_stm32wb10xx_cm4.s + * @author MCD Application Team + * @brief STM32WB10xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * +* This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl entry + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word 0 + .word 0 + .word C2SEV_PWR_C2H_IRQHandler + .word 0 + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word 0 + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word 0 + .word 0 + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word 0 + .word PWR_SOTF_BLEACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word 0 + .word 0 + .word 0 + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb15xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb15xx_cm4.s new file mode 100644 index 0000000000..1b9bdbf7a2 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb15xx_cm4.s @@ -0,0 +1,391 @@ +/** + ****************************************************************************** + * @file startup_stm32wb15xx_cm4.s + * @author MCD Application Team + * @brief STM32WB15xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * +* This software component is licensed by ST under Apache License, Version 2.0, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/Apache-2.0 + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* start address for the .MB_MEM2 section. defined in linker script */ +.word _sMB_MEM2 +/* end address for the .MB_MEM2 section. defined in linker script */ +.word _eMB_MEM2 + +/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */ +.macro INIT_BSS start, end + ldr r0, =\start + ldr r1, =\end + movs r3, #0 + bl LoopFillZerobss +.endm + +/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */ +.macro INIT_DATA start, end, src + ldr r0, =\start + ldr r1, =\end + ldr r2, =\src + movs r3, #0 + bl LoopCopyDataInit +.endm + +.section .text.data_initializers +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + bx lr + +FillZerobss: + str r3, [r0] + adds r0, r0, #4 + +LoopFillZerobss: + cmp r0, r1 + bcc FillZerobss + bx lr + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ +/* Call the clock system intitialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + INIT_DATA _sdata, _edata, _sidata + +/* Zero fill the bss segments. */ + INIT_BSS _sbss, _ebss + INIT_BSS _sMB_MEM2, _eMB_MEM2 + +/* Call static constructors */ + bl __libc_init_array +/* Call the application s entry point.*/ + bl entry + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_LSECSS_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word 0 + .word 0 + .word C2SEV_PWR_C2H_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word PKA_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word 0 + .word 0 + .word SPI1_IRQHandler + .word 0 + .word USART1_IRQHandler + .word LPUART1_IRQHandler + .word 0 + .word TSC_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word 0 + .word PWR_SOTF_BLEACT_RFPHASE_IRQHandler + .word IPCC_C1_RX_IRQHandler + .word IPCC_C1_TX_IRQHandler + .word HSEM_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word 0 + .word 0 + .word 0 + .word AES2_IRQHandler + .word RNG_IRQHandler + .word FPU_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word DMAMUX1_OVR_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_LSECSS_IRQHandler + .thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak C2SEV_PWR_C2H_IRQHandler + .thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak PKA_IRQHandler + .thumb_set PKA_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak PWR_SOTF_BLEACT_RFPHASE_IRQHandler + .thumb_set PWR_SOTF_BLEACT_RFPHASE_IRQHandler,Default_Handler + + .weak IPCC_C1_RX_IRQHandler + .thumb_set IPCC_C1_RX_IRQHandler,Default_Handler + + .weak IPCC_C1_TX_IRQHandler + .thumb_set IPCC_C1_TX_IRQHandler,Default_Handler + + .weak HSEM_IRQHandler + .thumb_set HSEM_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak AES2_IRQHandler + .thumb_set AES2_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s index 332538ba3f..23280535b6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb30xx_cm4.s @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, +* This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -107,10 +107,7 @@ Reset_Handler: bl __libc_init_array /* Call the application s entry point.*/ bl entry - -LoopForever: - b LoopForever - + bx lr .size Reset_Handler, .-Reset_Handler /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s index 5167c9b9b7..2377efc992 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb35xx_cm4.s @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, +* This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -107,10 +107,7 @@ Reset_Handler: bl __libc_init_array /* Call the application s entry point.*/ bl entry - -LoopForever: - b LoopForever - + bx lr .size Reset_Handler, .-Reset_Handler /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s index 9b6c5c173c..94a1e1de0e 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb50xx_cm4.s @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, +* This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -107,10 +107,7 @@ Reset_Handler: bl __libc_init_array /* Call the application s entry point.*/ bl entry - -LoopForever: - b LoopForever - + bx lr .size Reset_Handler, .-Reset_Handler /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s index 6a3dc942f0..bb1c5f7080 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, +* This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -107,10 +107,7 @@ Reset_Handler: bl __libc_init_array /* Call the application s entry point.*/ bl entry - -LoopForever: - b LoopForever - + bx lr .size Reset_Handler, .-Reset_Handler /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s index fb65ab204d..162128be40 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb5mxx_cm4.s @@ -17,10 +17,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, +* This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -107,10 +107,7 @@ Reset_Handler: bl __libc_init_array /* Call the application s entry point.*/ bl entry - -LoopForever: - b LoopForever - + bx lr .size Reset_Handler, .-Reset_Handler /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_flash_cm4.icf b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_flash_cm4.icf new file mode 100644 index 0000000000..3a77978567 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_flash_cm4.icf @@ -0,0 +1,40 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+/***** FLASH Part dedicated to M4 *****/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801B7FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000004;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20002FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x1000;
+define symbol __ICFEDIT_size_heap__ = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __ICFEDIT_region_RAM_SHARED_start__ = 0x20030000;
+define symbol __ICFEDIT_region_RAM_SHARED_end__ = 0x200327FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region RAM_SHARED_region = mem:[from __ICFEDIT_region_RAM_SHARED_start__ to __ICFEDIT_region_RAM_SHARED_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+/* MB_MEM1 and MB_MEM2 are sections reserved to mailbox communication. It is placed in the shared memory */
+initialize by copy { readwrite };
+do not initialize { section .noinit,
+ section MAPPING_TABLE,
+ section MB_MEM1 };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_SHARED_region { first section MAPPING_TABLE};
+place in RAM_SHARED_region { section MB_MEM1};
+place in RAM_SHARED_region { section MB_MEM2};
\ No newline at end of file diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_sram_cm4.icf b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_sram_cm4.icf new file mode 100644 index 0000000000..5301ec103f --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb10xx_sram_cm4.icf @@ -0,0 +1,39 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+/***** RAM dedicated to M4 *****/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x20002AFF;
+
+define symbol __ICFEDIT_region_RAM_start__ = 0x20002B00;
+define symbol __ICFEDIT_region_RAM_end__ = 0x2000AFFF;
+
+/***** RAM2a *****/
+define symbol __ICFEDIT_region_RAM_SHARED_start__ = 0x20030000;
+define symbol __ICFEDIT_region_RAM_SHARED_end__ = 0x2000AFFF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
\ No newline at end of file diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_flash_cm4.icf b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_flash_cm4.icf new file mode 100644 index 0000000000..3a77978567 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_flash_cm4.icf @@ -0,0 +1,40 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+/***** FLASH Part dedicated to M4 *****/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0801B7FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000004;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20002FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x1000;
+define symbol __ICFEDIT_size_heap__ = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __ICFEDIT_region_RAM_SHARED_start__ = 0x20030000;
+define symbol __ICFEDIT_region_RAM_SHARED_end__ = 0x200327FF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region RAM_SHARED_region = mem:[from __ICFEDIT_region_RAM_SHARED_start__ to __ICFEDIT_region_RAM_SHARED_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+/* MB_MEM1 and MB_MEM2 are sections reserved to mailbox communication. It is placed in the shared memory */
+initialize by copy { readwrite };
+do not initialize { section .noinit,
+ section MAPPING_TABLE,
+ section MB_MEM1 };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_SHARED_region { first section MAPPING_TABLE};
+place in RAM_SHARED_region { section MB_MEM1};
+place in RAM_SHARED_region { section MB_MEM2};
\ No newline at end of file diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_sram_cm4.icf b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_sram_cm4.icf new file mode 100644 index 0000000000..5301ec103f --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/linker/stm32wb15xx_sram_cm4.icf @@ -0,0 +1,39 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+/***** RAM dedicated to M4 *****/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x20002AFF;
+
+define symbol __ICFEDIT_region_RAM_start__ = 0x20002B00;
+define symbol __ICFEDIT_region_RAM_end__ = 0x2000AFFF;
+
+/***** RAM2a *****/
+define symbol __ICFEDIT_region_RAM_SHARED_start__ = 0x20030000;
+define symbol __ICFEDIT_region_RAM_SHARED_end__ = 0x2000AFFF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
\ No newline at end of file diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb10xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb10xx_cm4.s new file mode 100644 index 0000000000..73f5f11a92 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb10xx_cm4.s @@ -0,0 +1,422 @@ +;****************************************************************************** +;* File Name : startup_stm32wb10xx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB10xx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;* <h2><center>© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.</center></h2> +;* +;* This software component is licensed by ST under Apache License, Version 2.0, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/Apache-2.0 +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Communication Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_IRQHandler + B TIM1_UP_IRQHandler + + PUBWEAK TIM1_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_IRQHandler + B TIM1_TRG_COM_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb15xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb15xx_cm4.s new file mode 100644 index 0000000000..5c3e61967a --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb15xx_cm4.s @@ -0,0 +1,432 @@ +;****************************************************************************** +;* File Name : startup_stm32wb15xx_cm4.s +;* Author : MCD Application Team +;* Description : M4 core vector table of the STM32WB15xx devices for the +;* IAR (EWARM) toolchain. +;* +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;****************************************************************************** +;* @attention +;* +;* <h2><center>© Copyright (c) 2019 STMicroelectronics. +;* All rights reserved.</center></h2> +;* +;* This software component is licensed by ST under Apache License, Version 2.0, +;* the "License"; You may not use this file except in compliance with the +;* License. You may obtain a copy of the License at: +;* opensource.org/licenses/Apache-2.0 +;* +;****************************************************************************** +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_PVM_IRQHandler ; PVD and PVM Interrupt + DCD TAMP_STAMP_LSECSS_IRQHandler ; RTC Tamper, TimeStamp Interrupts and LSECSS Interrupts + DCD RTC_WKUP_IRQHandler ; RTC Wakeup Interrupt + DCD FLASH_IRQHandler ; FLASH global Interrupt + DCD RCC_IRQHandler ; RCC Interrupt + DCD EXTI0_IRQHandler ; EXTI Line 0 Interrupt + DCD EXTI1_IRQHandler ; EXTI Line 1 Interrupt + DCD EXTI2_IRQHandler ; EXTI Line 2 Interrupt + DCD EXTI3_IRQHandler ; EXTI Line 3 Interrup + DCD EXTI4_IRQHandler ; EXTI Line 4 Interrupt + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 Interrupt + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 Interrupt + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 Interrupt + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 Interrupt + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 Interrupt + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 Interrupt + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 Interrupt + DCD ADC1_IRQHandler ; ADC1 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD C2SEV_PWR_C2H_IRQHandler ; CPU M0+ SEV Interrupt + DCD COMP_IRQHandler ; COMP1 Interrupts + DCD EXTI9_5_IRQHandler ; EXTI Lines [9:5] Interrupt + DCD TIM1_BRK_IRQHandler ; TIM1 Break Interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Communication Interrupts + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare Interrupt + DCD TIM2_IRQHandler ; TIM2 Global Interrupt + DCD PKA_IRQHandler ; PKA Interrupt + DCD I2C1_EV_IRQHandler ; I2C1 Event Interrupt + DCD I2C1_ER_IRQHandler ; I2C1 Error Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 Interrupt + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 Interrupt + DCD LPUART1_IRQHandler ; LPUART1 Interrupt + DCD 0 ; Reserved + DCD TSC_IRQHandler ; TSC Interrupt + DCD EXTI15_10_IRQHandler ; EXTI Lines1[15:10 ]Interrupts + DCD RTC_Alarm_IRQHandler ; RTC Alarms (A and B) Interrupt + DCD 0 ; Reserved + DCD PWR_SOTF_BLEACT_RFPHASE_IRQHandler ; WKUP Interrupt from PWR + DCD IPCC_C1_RX_IRQHandler ; IPCC CPU1 RX occupied interrupt + DCD IPCC_C1_TX_IRQHandler ; IPCC CPU1 RX free interrupt + DCD HSEM_IRQHandler ; HSEM0 Interrupt + DCD LPTIM1_IRQHandler ; LPTIM1 Interrupt + DCD LPTIM2_IRQHandler ; LPTIM2 Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD AES2_IRQHandler ; AES2 Interrupt + DCD RNG_IRQHandler ; RNG1 Interrupt + DCD FPU_IRQHandler ; FPU Interrupt + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX overrun Interrupt + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_PVM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_PVM_IRQHandler + B PVD_PVM_IRQHandler + + PUBWEAK TAMP_STAMP_LSECSS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_LSECSS_IRQHandler + B TAMP_STAMP_LSECSS_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK C2SEV_PWR_C2H_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +C2SEV_PWR_C2H_IRQHandler + B C2SEV_PWR_C2H_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_IRQHandler + B TIM1_BRK_IRQHandler + + PUBWEAK TIM1_UP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_IRQHandler + B TIM1_UP_IRQHandler + + PUBWEAK TIM1_TRG_COM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_IRQHandler + B TIM1_TRG_COM_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK PKA_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PKA_IRQHandler + B PKA_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK LPUART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPUART1_IRQHandler + B LPUART1_IRQHandler + + PUBWEAK TSC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TSC_IRQHandler + B TSC_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK PWR_SOTF_BLEACT_RFPHASE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PWR_SOTF_BLEACT_RFPHASE_IRQHandler + B PWR_SOTF_BLEACT_RFPHASE_IRQHandler + + PUBWEAK IPCC_C1_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_RX_IRQHandler + B IPCC_C1_RX_IRQHandler + + PUBWEAK IPCC_C1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +IPCC_C1_TX_IRQHandler + B IPCC_C1_TX_IRQHandler + + PUBWEAK HSEM_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HSEM_IRQHandler + B HSEM_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK LPTIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM2_IRQHandler + B LPTIM2_IRQHandler + + PUBWEAK AES2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES2_IRQHandler + B AES2_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK DMAMUX1_OVR_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMAMUX1_OVR_IRQHandler + B DMAMUX1_OVR_IRQHandler + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s index 9acea1dca5..5cfcf77bff 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb30xx_cm4.s @@ -19,10 +19,10 @@ ;* <h2><center>© Copyright (c) 2019 STMicroelectronics. ;* All rights reserved.</center></h2> ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** ; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s index ec3a452660..bfc2c92ebc 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb35xx_cm4.s @@ -19,10 +19,10 @@ ;* <h2><center>© Copyright (c) 2019 STMicroelectronics. ;* All rights reserved.</center></h2> ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** ; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s index 804fbe15a1..ff253dad93 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb50xx_cm4.s @@ -19,10 +19,10 @@ ;* <h2><center>© Copyright (c) 2019 STMicroelectronics. ;* All rights reserved.</center></h2> ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** ; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb55xx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb55xx_cm4.s index 1f886ff593..f3b216985d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb55xx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb55xx_cm4.s @@ -19,10 +19,10 @@ ;* <h2><center>© Copyright (c) 2019 STMicroelectronics. ;* All rights reserved.</center></h2> ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** ; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s index 6d2a51d5a5..0619c65161 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/iar/startup_stm32wb5mxx_cm4.s @@ -19,10 +19,10 @@ ;* <h2><center>© Copyright (c) 2019 STMicroelectronics. ;* All rights reserved.</center></h2> ;* -;* This software component is licensed by ST under BSD 3-Clause license, +;* This software component is licensed by ST under Apache License, Version 2.0, ;* the "License"; You may not use this file except in compliance with the ;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause +;* opensource.org/licenses/Apache-2.0 ;* ;****************************************************************************** ; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c index 4cb9e0e423..39ef4f59f3 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c @@ -63,10 +63,10 @@ * <h2><center>© Copyright (c) 2019 STMicroelectronics. * All rights reserved.</center></h2> * - * This software component is licensed by ST under BSD 3-Clause license, + * This software component is licensed by ST under Apache License, Version 2.0, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * opensource.org/licenses/Apache-2.0 * ****************************************************************************** */ @@ -121,14 +121,29 @@ * @{ */ -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate CPU1 CM4 and/or CPU2 + CM0+ vector table anywhere in Sram or Flash. Else vector table will be kept + at address 0x00 which correspond to automatic remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ +#if defined(USER_VECT_TAB_ADDRESS) + /*!< Uncomment this line for user vector table remap in Sram else user remap + will be done in Flash. */ /* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field. +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base address field. This value must be a multiple of 0x200. */ - -#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base offset field. +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. This value must be a multiple of 0x200. */ +#endif +#endif + /** * @} */ @@ -161,7 +176,7 @@ const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \ 4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */ -#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) +#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) || defined (STM32WB10xx) const uint32_t SmpsPrescalerTable[4UL][6UL]={{1UL,3UL,2UL,2UL,1UL,2UL}, \ {2UL,6UL,4UL,3UL,2UL,4UL}, \ {4UL,12UL,8UL,6UL,4UL,8UL}, \ @@ -191,12 +206,9 @@ */ void SystemInit(void) { +#if defined(USER_VECT_TAB_ADDRESS) /* Configure the Vector Table location add offset address ------------------*/ -#if defined(VECT_TAB_SRAM) && defined(VECT_TAB_BASE_ADDRESS) - /* program in SRAMx */ - SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAMx for CPU1 */ -#else /* program in FLASH */ - SCB->VTOR = VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; #endif /* FPU settings ------------------------------------------------------------*/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armcc.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armcc.h index 4d9d0645d3..59f173ac71 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armcc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armcc.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_armcc.h * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.1.0 + * @date 08. May 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -47,6 +47,10 @@ /* __ARM_ARCH_8M_BASE__ not applicable */ /* __ARM_ARCH_8M_MAIN__ not applicable */ +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif /* CMSIS compiler specific defines */ #ifndef __ASM @@ -100,6 +104,31 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif /* ########################### Core Function Access ########################### */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang.h index 162a400ea1..e917f357a3 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_armclang.h * @brief CMSIS compiler armclang (Arm Compiler 6) header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.2.0 + * @date 08. May 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -43,9 +43,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static __inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -110,7 +110,31 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif /* ########################### Core Function Access ########################### */ /** \ingroup CMSIS_Core_FunctionInterface @@ -781,9 +805,11 @@ __STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) * Otherwise, use general registers, specified by constraint "r" */ #if defined (__thumb__) && !defined (__thumb2__) #define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) #define __CMSIS_GCC_USE_REG(r) "l" (r) #else #define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) #define __CMSIS_GCC_USE_REG(r) "r" (r) #endif @@ -821,14 +847,14 @@ __STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) so that all instructions following the ISB are fetched from cache or memory, after the instruction has been completed. */ -#define __ISB() __builtin_arm_isb(0xF); +#define __ISB() __builtin_arm_isb(0xF) /** \brief Data Synchronization Barrier \details Acts as a special kind of Data Memory Barrier. It completes when all explicit memory accesses before this instruction complete. */ -#define __DSB() __builtin_arm_dsb(0xF); +#define __DSB() __builtin_arm_dsb(0xF) /** @@ -836,7 +862,7 @@ __STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) \details Ensures the apparent order of the explicit memory operations before and after the instruction, without ensuring their completion. */ -#define __DMB() __builtin_arm_dmb(0xF); +#define __DMB() __builtin_arm_dmb(0xF) /** @@ -908,7 +934,23 @@ __STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) \param [in] value Value to count the leading zeros \return number of leading zeros in value */ -#define __CLZ (uint8_t)__builtin_clz +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} #if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ @@ -1321,532 +1363,65 @@ __STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) #if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) -__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#define __SSAT16(ARG1,ARG2) \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -#if 0 -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) -#endif +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub #define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang_ltm.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000000..feec324059 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include <arm_compat.h> /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_compiler.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_compiler.h index 94212eb87a..adbf296f15 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_compiler.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_compiler.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file cmsis_compiler.h * @brief CMSIS compiler generic header file - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.1.0 + * @date 09. October 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -35,9 +35,15 @@ /* - * Arm Compiler 6 (armclang) + * Arm Compiler 6.6 LTM (armclang) */ -#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) #include "cmsis_armclang.h" @@ -115,8 +121,11 @@ #define __ALIGNED(x) __attribute__((aligned(x))) #endif #ifndef __RESTRICT - #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. - #define __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 #endif @@ -187,6 +196,10 @@ #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. #define __RESTRICT #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif /* @@ -255,6 +268,10 @@ #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. #define __RESTRICT #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif #else diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_gcc.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_gcc.h index 2d9db15a5d..3ddcc58b69 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_gcc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_gcc.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_gcc.h * @brief CMSIS compiler GCC header file - * @version V5.0.4 - * @date 09. April 2018 + * @version V5.2.0 + * @date 08. May 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -113,7 +113,74 @@ #ifndef __RESTRICT #define __RESTRICT __restrict #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; i<pTable->wlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; i<pTable->wlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif /* ########################### Core Function Access ########################### */ /** \ingroup CMSIS_Core_FunctionInterface @@ -1008,7 +1075,23 @@ __STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) \param [in] value Value to count the leading zeros \return number of leading zeros in value */ -#define __CLZ (uint8_t)__builtin_clz +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} #if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_iccarm.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_iccarm.h index 11c4af0eba..12d68fd9a6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_iccarm.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_iccarm.h @@ -1,13 +1,14 @@ /**************************************************************************//** * @file cmsis_iccarm.h * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file - * @version V5.0.7 - * @date 19. June 2018 + * @version V5.1.0 + * @date 08. May 2019 ******************************************************************************/ //------------------------------------------------------------------------------ // -// Copyright (c) 2017-2018 IAR Systems +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. // // Licensed under the Apache License, Version 2.0 (the "License") // you may not use this file except in compliance with the License. @@ -110,6 +111,10 @@ #define __ASM __asm #endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + #ifndef __INLINE #define __INLINE inline #endif @@ -150,7 +155,12 @@ #endif #ifndef __RESTRICT - #define __RESTRICT __restrict + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif #endif #ifndef __STATIC_INLINE @@ -234,6 +244,25 @@ __packed struct __iar_u32 { uint32_t v; }; #endif #endif +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif #ifndef __ICCARM_INTRINSICS_VERSION__ #define __ICCARM_INTRINSICS_VERSION__ 0 diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_version.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_version.h index 660f612aa3..f2e2746626 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_version.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/cmsis_version.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file cmsis_version.h * @brief CMSIS Core(M) Version definitions - * @version V5.0.2 - * @date 19. April 2017 + * @version V5.0.3 + * @date 24. June 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2017 ARM Limited. All rights reserved. + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -33,7 +33,7 @@ /* CMSIS Version definitions */ #define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ -#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ #define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ #endif diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv81mml.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000000..8441e57fb1 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mbl.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mbl.h index 251e4ede3a..344dca5148 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mbl.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mbl.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_armv8mbl.h * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 + * @version V5.0.8 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -1223,7 +1223,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -1253,7 +1253,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1552,6 +1554,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mml.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mml.h index 3a3148ea31..5ddb8aeda7 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mml.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_armv8mml.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_armv8mml.h * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 06. July 2018 + * @version V5.1.0 + * @date 12. September 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -97,7 +97,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -538,14 +538,6 @@ typedef struct __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ } SCB_Type; /* SCB CPUID Register Definitions */ @@ -921,78 +913,6 @@ typedef struct #define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ #define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - /*@} end of group CMSIS_SCB */ @@ -1097,10 +1017,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1163,18 +1080,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -2093,7 +1998,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -2122,7 +2027,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -2148,7 +2053,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2440,6 +2347,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } @@ -2496,7 +2404,7 @@ __STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB_NS->AIRCR = reg_value; } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0.h index f929bba07b..cafae5a0a7 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm0.h * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 + * @version V5.0.6 + * @date 13. March 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -316,7 +316,7 @@ typedef struct __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[31U]; __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; + uint32_t RESERVED1[31U]; __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[31U]; __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -624,7 +624,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -829,8 +831,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)0x0U; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ } @@ -844,8 +847,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)0x0U; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0plus.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0plus.h index 424011ac36..d104965db5 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0plus.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm0plus.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm0plus.h * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 28. May 2018 + * @version V5.0.7 + * @date 13. March 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -330,7 +330,7 @@ typedef struct __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[31U]; __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; + uint32_t RESERVED1[31U]; __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[31U]; __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -742,7 +742,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -948,11 +950,12 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t vectors = SCB->VTOR; #else - uint32_t *vectors = (uint32_t *)0x0U; + uint32_t vectors = 0x0U; #endif - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ } @@ -967,12 +970,11 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { #if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) - uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t vectors = SCB->VTOR; #else - uint32_t *vectors = (uint32_t *)0x0U; + uint32_t vectors = 0x0U; #endif - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; - + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm1.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm1.h index 0ed678e3b8..76b4569743 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm1.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm1.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_cm1.h * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File - * @version V1.0.0 - * @date 23. July 2018 + * @version V1.0.1 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -651,7 +651,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -858,6 +860,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)0x0U; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm23.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm23.h index acbc5dfea2..b79c6af0b1 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm23.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm23.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_cm23.h * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File - * @version V5.0.7 - * @date 22. June 2018 + * @version V5.0.8 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -1298,7 +1298,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -1328,7 +1328,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1627,6 +1629,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) uint32_t *vectors = (uint32_t *)0x0U; #endif vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm3.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm3.h index 74bff64be4..8157ca782d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm3.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm3.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm3.h * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.0 + * @date 13. March 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -342,7 +342,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -668,6 +668,12 @@ typedef struct #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ #define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ #define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ @@ -677,6 +683,7 @@ typedef struct #define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ #define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif /*@} end of group CMSIS_SCnotSCB */ @@ -757,10 +764,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -811,18 +815,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1055,13 +1047,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1084,13 +1076,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1512,7 +1504,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1735,8 +1729,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ } @@ -1750,8 +1745,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } @@ -1784,6 +1779,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) #endif + /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm33.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm33.h index 6cd2db77fe..7fed59a88e 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm33.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm33.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_cm33.h * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File - * @version V5.0.9 - * @date 06. July 2018 + * @version V5.1.0 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -97,7 +97,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined (__ARM_PCS_VFP) + #if defined (__ARM_FP) #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -538,14 +538,6 @@ typedef struct __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ } SCB_Type; /* SCB CPUID Register Definitions */ @@ -921,78 +913,6 @@ typedef struct #define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ #define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - /*@} end of group CMSIS_SCB */ @@ -1097,10 +1017,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1163,18 +1080,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -2168,7 +2073,7 @@ typedef struct #define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ #define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ #define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ -#define EXC_RETURN_SPSEL (0x00000002UL) /* bit [1] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ #define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ @@ -2197,7 +2102,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priority group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -2223,7 +2128,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2515,6 +2422,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm35p.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000000..5579c82306 --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm4.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm4.h index 7d56873532..12c023b801 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm4.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm4.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm4.h * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.0 + * @date 13. March 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,7 +86,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -408,7 +408,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -822,10 +822,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -876,18 +873,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1120,13 +1105,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1149,13 +1134,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1324,6 +1309,7 @@ typedef struct __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ } FPU_Type; /* Floating-Point Context Control Register Definitions */ @@ -1409,6 +1395,11 @@ typedef struct #define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ #define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + /*@} end of group CMSIS_FPU */ @@ -1625,7 +1616,7 @@ typedef struct #ifdef CMSIS_VECTAB_VIRTUAL #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE - #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" #endif #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE #else @@ -1689,7 +1680,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1912,8 +1905,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ } @@ -1927,8 +1921,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } @@ -1953,6 +1947,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) /*@} end of CMSIS_Core_NVICFunctions */ + /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm7.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm7.h index a14dc623b7..c4515d8fa3 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm7.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_cm7.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_cm7.h * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File - * @version V5.0.8 - * @date 04. June 2018 + * @version V5.1.1 + * @date 28. March 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,7 +86,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) #define __FPU_USED 1U #else @@ -423,7 +423,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -930,6 +930,24 @@ typedef struct #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ /* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + #define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ #define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ @@ -1024,10 +1042,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -1078,18 +1093,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1325,13 +1328,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1354,13 +1357,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1617,6 +1620,9 @@ typedef struct /* Media and FP Feature Register 2 Definitions */ +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + /*@} end of group CMSIS_FPU */ @@ -1897,7 +1903,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -2120,8 +2128,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); } @@ -2135,8 +2144,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } @@ -2161,6 +2170,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) /*@} end of CMSIS_Core_NVICFunctions */ + /* ########################## MPU functions #################################### */ #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) @@ -2169,6 +2179,7 @@ __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) #endif + /* ########################## FPU functions #################################### */ /** \ingroup CMSIS_Core_FunctionInterface @@ -2204,7 +2215,6 @@ __STATIC_INLINE uint32_t SCB_GetFPUType(void) } } - /*@} end of CMSIS_Core_FpuFunctions */ @@ -2221,14 +2231,18 @@ __STATIC_INLINE uint32_t SCB_GetFPUType(void) #define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) #define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ /** \brief Enable I-Cache \details Turns on I-Cache */ -__STATIC_INLINE void SCB_EnableICache (void) +__STATIC_FORCEINLINE void SCB_EnableICache (void) { #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + __DSB(); __ISB(); SCB->ICIALLU = 0UL; /* invalidate I-Cache */ @@ -2245,7 +2259,7 @@ __STATIC_INLINE void SCB_EnableICache (void) \brief Disable I-Cache \details Turns off I-Cache */ -__STATIC_INLINE void SCB_DisableICache (void) +__STATIC_FORCEINLINE void SCB_DisableICache (void) { #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) __DSB(); @@ -2262,7 +2276,7 @@ __STATIC_INLINE void SCB_DisableICache (void) \brief Invalidate I-Cache \details Invalidates I-Cache */ -__STATIC_INLINE void SCB_InvalidateICache (void) +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) { #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) __DSB(); @@ -2275,17 +2289,49 @@ __STATIC_INLINE void SCB_InvalidateICache (void) /** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** \brief Enable D-Cache \details Turns on D-Cache */ -__STATIC_INLINE void SCB_EnableDCache (void) +__STATIC_FORCEINLINE void SCB_EnableDCache (void) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) uint32_t ccsidr; uint32_t sets; uint32_t ways; - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ __DSB(); ccsidr = SCB->CCSIDR; @@ -2316,14 +2362,14 @@ __STATIC_INLINE void SCB_EnableDCache (void) \brief Disable D-Cache \details Turns off D-Cache */ -__STATIC_INLINE void SCB_DisableDCache (void) +__STATIC_FORCEINLINE void SCB_DisableDCache (void) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) uint32_t ccsidr; uint32_t sets; uint32_t ways; - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + SCB->CSSELR = 0U; /* select Level 1 data cache */ __DSB(); SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ @@ -2354,14 +2400,14 @@ __STATIC_INLINE void SCB_DisableDCache (void) \brief Invalidate D-Cache \details Invalidates D-Cache */ -__STATIC_INLINE void SCB_InvalidateDCache (void) +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) uint32_t ccsidr; uint32_t sets; uint32_t ways; - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + SCB->CSSELR = 0U; /* select Level 1 data cache */ __DSB(); ccsidr = SCB->CCSIDR; @@ -2389,15 +2435,15 @@ __STATIC_INLINE void SCB_InvalidateDCache (void) \brief Clean D-Cache \details Cleans D-Cache */ -__STATIC_INLINE void SCB_CleanDCache (void) +__STATIC_FORCEINLINE void SCB_CleanDCache (void) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) uint32_t ccsidr; uint32_t sets; uint32_t ways; - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ - __DSB(); + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); ccsidr = SCB->CCSIDR; @@ -2424,14 +2470,14 @@ __STATIC_INLINE void SCB_CleanDCache (void) \brief Clean & Invalidate D-Cache \details Cleans and Invalidates D-Cache */ -__STATIC_INLINE void SCB_CleanInvalidateDCache (void) +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) uint32_t ccsidr; uint32_t sets; uint32_t ways; - SCB->CSSELR = 0U; /*(0U << 1U) | 0U;*/ /* Level 1 data cache */ + SCB->CSSELR = 0U; /* select Level 1 data cache */ __DSB(); ccsidr = SCB->CCSIDR; @@ -2457,27 +2503,30 @@ __STATIC_INLINE void SCB_CleanInvalidateDCache (void) /** \brief D-Cache Invalidate by address - \details Invalidates D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address \param[in] dsize size of memory block (in number of bytes) */ -__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t)addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); - __DSB(); + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); - while (op_size > 0) { - SCB->DCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; + __DSB(); + __ISB(); } - - __DSB(); - __ISB(); #endif } @@ -2485,26 +2534,29 @@ __STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize /** \brief D-Cache Clean by address \details Cleans D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address \param[in] dsize size of memory block (in number of bytes) */ -__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); - __DSB(); + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); - while (op_size > 0) { - SCB->DCCMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; + __DSB(); + __ISB(); } - - __DSB(); - __ISB(); #endif } @@ -2512,30 +2564,32 @@ __STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) /** \brief D-Cache Clean and Invalidate by address \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. \param[in] addr address (aligned to 32-byte boundary) \param[in] dsize size of memory block (in number of bytes) */ -__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) { #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); - __DSB(); + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); - while (op_size > 0) { - SCB->DCCIMVAC = op_addr; - op_addr += (uint32_t)linesize; - op_size -= linesize; + __DSB(); + __ISB(); } - - __DSB(); - __ISB(); #endif } - /*@} end of CMSIS_Core_CacheFunctions */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc000.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc000.h index 9b67c92f3b..cf92577b63 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc000.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc000.h @@ -1,8 +1,8 @@ /**************************************************************************//** * @file core_sc000.h * @brief CMSIS SC000 Core Peripheral Access Layer Header File - * @version V5.0.5 - * @date 28. May 2018 + * @version V5.0.6 + * @date 12. November 2018 ******************************************************************************/ /* * Copyright (c) 2009-2018 Arm Limited. All rights reserved. @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -750,7 +750,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -904,6 +906,7 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { uint32_t *vectors = (uint32_t *)SCB->VTOR; vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc300.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc300.h index 3e8a47109a..40f3af81be 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc300.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/core_sc300.h @@ -1,11 +1,11 @@ /**************************************************************************//** * @file core_sc300.h * @brief CMSIS SC300 Core Peripheral Access Layer Header File - * @version V5.0.6 - * @date 04. June 2018 + * @version V5.0.8 + * @date 31. May 2019 ******************************************************************************/ /* - * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -81,7 +81,7 @@ #endif #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP + #if defined __ARM_FP #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" #endif @@ -342,7 +342,7 @@ typedef struct __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ uint32_t RESERVED0[24U]; __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; + uint32_t RESERVED1[24U]; __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ uint32_t RESERVED2[24U]; __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ @@ -653,13 +653,23 @@ typedef struct { uint32_t RESERVED0[1U]; __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - uint32_t RESERVED1[1U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ } SCnSCB_Type; /* Interrupt Controller Type Register Definitions */ #define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ #define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + /*@} end of group CMSIS_SCnotSCB */ @@ -739,10 +749,7 @@ typedef struct __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ uint32_t RESERVED2[15U]; __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED3[32U]; uint32_t RESERVED4[43U]; __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ @@ -793,18 +800,6 @@ typedef struct #define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ #define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - /* ITM Lock Status Register Definitions */ #define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ #define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ @@ -1037,13 +1032,13 @@ typedef struct /* TPI Integration ETM Data Register Definitions (FIFO0) */ #define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ #define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ #define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ #define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ #define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ #define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ @@ -1066,13 +1061,13 @@ typedef struct /* TPI Integration ITM Data Register Definitions (FIFO1) */ #define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ #define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ #define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ #define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ #define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ #define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ @@ -1448,7 +1443,6 @@ typedef struct #define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ - /** \brief Set Priority Grouping \details Sets the priority grouping field using the required unlock sequence. @@ -1467,7 +1461,7 @@ __STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ reg_value = (reg_value | ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ SCB->AIRCR = reg_value; } @@ -1493,7 +1487,9 @@ __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) { if ((int32_t)(IRQn) >= 0) { + __COMPILER_BARRIER(); NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); } } @@ -1716,8 +1712,9 @@ __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGr */ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ } @@ -1731,8 +1728,8 @@ __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) */ __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) { - uint32_t *vectors = (uint32_t *)SCB->VTOR; - return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv7.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv7.h index 01422033d0..66ef59b4a0 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv7.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv7.h @@ -1,11 +1,11 @@ /****************************************************************************** * @file mpu_armv7.h * @brief CMSIS MPU API for Armv7-M MPU - * @version V5.0.4 - * @date 10. January 2018 + * @version V5.1.0 + * @date 08. March 2019 ******************************************************************************/ /* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -86,10 +86,10 @@ * \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. */ #define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ - ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ - (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ - (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ - (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) /** * MPU Region Attribute and Size Register Value @@ -100,11 +100,14 @@ * \param SubRegionDisable Sub-region disable field. * \param Size Region size of the region to be configured, for example 4K, 8K. */ -#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ - ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ - (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ - (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) - +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + /** * MPU Region Attribute and Size Register Value * @@ -131,7 +134,7 @@ /** * MPU Memory Access Attribute for device memory. -* - TEX: 000b (if non-shareable) or 010b (if shareable) +* - TEX: 000b (if shareable) or 010b (if non-shareable) * - Shareable or non-shareable * - Non-cacheable * - Bufferable (if shareable) or non-bufferable (if non-shareable) @@ -187,20 +190,19 @@ typedef struct { */ __STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) { - __DSB(); - __ISB(); MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the MPU. */ __STATIC_INLINE void ARM_MPU_Disable(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif @@ -243,7 +245,7 @@ __STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t r * \param src Source data is copied from. * \param len Amount of data words to be copied. */ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; for (i = 0U; i < len; ++i) @@ -260,11 +262,11 @@ __STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) { const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; while (cnt > MPU_TYPE_RALIASES) { - orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); table += MPU_TYPE_RALIASES; cnt -= MPU_TYPE_RALIASES; } - orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); } #endif diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv8.h b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv8.h index 62571da5b8..0041d4dc6f 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv8.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/CMSIS/Include/mpu_armv8.h @@ -1,11 +1,11 @@ /****************************************************************************** * @file mpu_armv8.h - * @brief CMSIS MPU API for Armv8-M MPU - * @version V5.0.4 - * @date 10. January 2018 + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 ******************************************************************************/ /* - * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * @@ -101,6 +101,21 @@ ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ (MPU_RLAR_EN_Msk)) +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + /** * Struct for a single MPU Region */ @@ -114,20 +129,19 @@ typedef struct { */ __STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) { - __DSB(); - __ISB(); MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the MPU. */ __STATIC_INLINE void ARM_MPU_Disable(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif @@ -140,20 +154,19 @@ __STATIC_INLINE void ARM_MPU_Disable(void) */ __STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) { - __DSB(); - __ISB(); MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; #endif + __DSB(); + __ISB(); } /** Disable the Non-secure MPU. */ __STATIC_INLINE void ARM_MPU_Disable_NS(void) { - __DSB(); - __ISB(); + __DMB(); #ifdef SCB_SHCSR_MEMFAULTENA_Msk SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; #endif @@ -267,7 +280,7 @@ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t * \param src Source data is copied from. * \param len Amount of data words to be copied. */ -__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; for (i = 0U; i < len; ++i) @@ -287,7 +300,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; if (cnt == 1U) { mpu->RNR = rnr; - orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); } else { uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; @@ -295,7 +308,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ mpu->RNR = rnrBase; while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { uint32_t c = MPU_TYPE_RALIASES - rnrOffset; - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); table += c; cnt -= c; rnrOffset = 0U; @@ -303,7 +316,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ mpu->RNR = rnrBase; } - orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); } } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h index e57e8237ae..1f40166fcd 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -23,7 +23,7 @@ #define STM32_HAL_LEGACY #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Includes ------------------------------------------------------------------*/ @@ -38,7 +38,6 @@ #define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF #define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR #define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR - /** * @} */ @@ -383,7 +382,6 @@ #define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT #endif /* STM32H7 */ - /** * @} */ @@ -596,24 +594,24 @@ #define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 #define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM #define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/ +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB*/ #if defined(STM32L1) - #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH #endif /* STM32L1 */ #if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH #endif /* STM32F0 || STM32F3 || STM32F1 */ #define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 @@ -774,49 +772,6 @@ #define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) #define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) -/** @brief Constants defining the events that can be selected to configure the - * set/reset crossbar of a timer output - */ -#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) -#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) -#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) -#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) -#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) -#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) -#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) -#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) -#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) - -#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) -#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) -#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) -#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) -#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) -#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) -#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) -#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) -#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) - -/** @brief Constants defining the event filtering applied to external events - * by a timer - */ -#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) -#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) -#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) -#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) - /** @brief Constants defining the DLL calibration periods (in micro seconds) */ #define HRTIM_CALIBRATIONRATE_7300 0x00000000U @@ -896,7 +851,6 @@ #define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS #define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS #define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS - /** * @} */ @@ -969,6 +923,11 @@ #define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID #endif +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif /** * @} @@ -980,15 +939,15 @@ #define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS #if defined(STM32H7) - #define I2S_IT_TXE I2S_IT_TXP - #define I2S_IT_RXNE I2S_IT_RXP +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP - #define I2S_FLAG_TXE I2S_FLAG_TXP - #define I2S_FLAG_RXNE I2S_FLAG_RXP +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP #endif #if defined(STM32F7) - #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL #endif /** * @} @@ -1023,7 +982,7 @@ /** * @} */ - + /** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose * @{ */ @@ -1123,16 +1082,16 @@ #if defined(STM32H7) - #define SPI_FLAG_TXE SPI_FLAG_TXP - #define SPI_FLAG_RXNE SPI_FLAG_RXP +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP - #define SPI_IT_TXE SPI_IT_TXP - #define SPI_IT_RXNE SPI_IT_RXP +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP - #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET - #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET - #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET - #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET #endif /* STM32H7 */ @@ -1459,7 +1418,7 @@ #define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY #define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY -#if defined(STM32L4) || defined(STM32L5) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) #define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt #define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End @@ -1481,7 +1440,7 @@ #define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT #define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT -#endif /* STM32L4 || STM32L5 || STM32F4 || STM32F7 || STM32H7 */ +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ /** * @} */ @@ -1495,7 +1454,8 @@ #define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode #define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode #define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) #define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect #define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) #if defined(STM32L0) @@ -1503,7 +1463,8 @@ #define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) #endif #define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) #if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) #define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode #define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode @@ -1526,9 +1487,9 @@ #define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase #define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program - /** +/** * @} - */ + */ /** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose * @{ @@ -1538,7 +1499,8 @@ #define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter #define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ + )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) #if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) #define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT @@ -1563,9 +1525,9 @@ #define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA #define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA #endif /* STM32F4 */ - /** +/** * @} - */ + */ /** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose * @{ @@ -1620,9 +1582,9 @@ #define PWR_MODE_EVT PWR_PVD_MODE_NORMAL - /** +/** * @} - */ + */ /** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose * @{ @@ -1871,15 +1833,15 @@ #define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC #define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC #if defined(STM32H7) - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 #else - #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG - #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG - #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG - #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG #endif /* STM32H7 */ #define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT #define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT @@ -2090,8 +2052,8 @@ */ #define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) /** * @} @@ -2147,7 +2109,7 @@ #define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT #if defined(STM32H7) - #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG #endif /** @@ -2284,7 +2246,8 @@ #define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI #define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) #define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE #define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE @@ -3252,7 +3215,7 @@ #define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK #define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 -#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) #define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE #else #define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK @@ -3381,7 +3344,7 @@ /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose * @{ */ -#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) #else #define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG #endif @@ -3401,19 +3364,19 @@ #else #define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) #define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) #define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) #define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) #define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) #endif /* STM32F1 */ #define IS_ALARM IS_RTC_ALARM @@ -3597,6 +3560,13 @@ #define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE #define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h index 2b36d470cd..44f851ea68 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal.h @@ -521,8 +521,13 @@ typedef enum (((__INTERRUPT__) & SYSCFG_IT_FPU_IDC) == SYSCFG_IT_FPU_IDC) || \ (((__INTERRUPT__) & SYSCFG_IT_FPU_IXC) == SYSCFG_IT_FPU_IXC)) +#if defined(STM32WB15xx) +#define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFU)) +#define IS_SYSCFG_SRAM2WRP2_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0x0000000FU)) +#else #define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFU)) #define IS_SYSCFG_SRAM2WRP2_PAGE(__PAGE__) IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) +#endif #if defined(VREFBUF) #define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h index 0968ba9891..f53b7f9aa4 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc.h @@ -44,6 +44,9 @@ extern "C" { * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC oversampling" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief ADC group regular oversampling structure definition */ @@ -67,6 +70,7 @@ typedef struct This parameter can be a value of @ref ADC_HAL_EC_OVS_SCOPE_REG */ } ADC_OversamplingTypeDef; +#endif /** * @brief Structure definition of ADC instance and ADC group regular. @@ -131,6 +135,13 @@ typedef struct use HAL_ADC_PollForConversion() to ensure that conversion is completed and HAL_ADC_GetValue() to retrieve conversion result and trig another conversion start. (in case of usage of ADC group injected, use the equivalent functions HAL_ADCExInjected_Start(), HAL_ADCEx_InjectedGetValue(), ...). */ +#if defined(ADC_SUPPORT_2_5_MSPS) + FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. + Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ + +#endif FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular, after the first ADC conversion start trigger occurred (software start or external trigger). This parameter can be set to ENABLE or DISABLE. */ @@ -147,9 +158,13 @@ typedef struct Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. This parameter can be set to ENABLE or DISABLE. */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group regular number of discontinuous conversions" not available on ADC peripheral of this STM32WB device */ +#else uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of ADC group regular (parameter NbrOfConversion) will be subdivided. If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded. This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ +#endif uint32_t ExternalTrigConv; /*!< Select the external event source used to trigger ADC group regular conversion start. If set to ADC_SOFTWARE_START, external triggers are disabled and software trigger is used instead. @@ -176,12 +191,47 @@ typedef struct overwritten, user can willingly not read all the converted data, this is not considered as an erroneous case. - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register). */ +#if defined (ADC_SUPPORT_2_5_MSPS) + uint32_t SamplingTimeCommon1; /*!< Set sampling time common to a group of channels. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME_INST_SCOPE + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ + + uint32_t SamplingTimeCommon2; /*!< Set sampling time common to a group of channels, second common setting possible. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + Note: On this STM32 family, two different sampling time settings are available, each channel can use one of these two settings. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME_INST_SCOPE + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: few tens of microseconds). */ +#endif + +#if !defined (ADC_SUPPORT_2_5_MSPS) FunctionalState OversamplingMode; /*!< Specify whether the oversampling feature is enabled or disabled. This parameter can be set to ENABLE or DISABLE. - Note: This parameter can be modified only if there is no conversion is ongoing on ADC groups regular and injected */ + Note: This parameter can be modified only if there is no conversion is ongoing on ADC group regular. */ ADC_OversamplingTypeDef Oversampling; /*!< Specify the Oversampling parameters. Caution: this setting overwrites the previous oversampling configuration if oversampling is already enabled. */ +#endif + +#if defined (ADC_SUPPORT_2_5_MSPS) + uint32_t TriggerFrequencyMode; /*!< Set ADC trigger frequency mode. + This parameter can be a value of @ref ADC_HAL_EC_REG_TRIGGER_FREQ. + Note: ADC trigger frequency mode must be set to low frequency when + a duration is exceeded before ADC conversion start trigger event + (between ADC enable and ADC conversion start trigger event + or between two ADC conversion start trigger event). + Duration value: Refer to device datasheet, parameter "tIdle". + Note: When ADC trigger frequency mode is set to low frequency, + some rearm cycles are inserted before performing ADC conversion + start, inducing a delay of 2 ADC clock cycles. */ +#endif } ADC_InitTypeDef; @@ -218,6 +268,7 @@ typedef struct sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) Refer to device datasheet for timings values. */ +#if !defined (ADC_SUPPORT_2_5_MSPS) uint32_t SingleDiff; /*!< Select single-ended or differential input. In differential mode: Differential measurement is carried out between the selected channel 'i' (positive input) and channel 'i+1' (negative input). Only channel 'i' has to be configured, channel 'i+1' is configured automatically. @@ -241,6 +292,7 @@ typedef struct Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion). */ +#endif } ADC_ChannelConfTypeDef; /** @@ -253,7 +305,7 @@ typedef struct { uint32_t WatchdogNumber; /*!< Select which ADC analog watchdog is monitoring the selected channel. For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode') - For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel) + For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel). Note: Analog Watchdog 2 and 3 are not available on devices: STM32WB10xx, STM32WB15xx. This parameter can be a value of @ref ADC_HAL_EC_AWD_NUMBER. */ uint32_t WatchdogMode; /*!< Configure the ADC analog watchdog mode: single/all/none channels. @@ -367,7 +419,11 @@ typedef struct HAL_LockTypeDef Lock; /*!< ADC locking object */ __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ __IO uint32_t ErrorCode; /*!< ADC Error code */ +#if defined (ADC_SUPPORT_2_5_MSPS) + uint32_t ADCGroupRegularSequencerRanks; /*!< ADC group regular sequencer memorization of ranks setting, used in mode "fully configurable" (refer to parameter 'ScanConvMode') */ +#else ADC_InjectionConfigTypeDef InjectionConfig ; /*!< ADC injected channel configuration build-up structure */ +#endif #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ @@ -474,7 +530,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @{ */ #define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ -#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/ +#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ /** * @} */ @@ -482,8 +538,33 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to /** @defgroup ADC_Scan_mode ADC sequencer scan mode * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Note: On STM32WB10xx, STM32WB15xx devices, ADC group regular sequencer */ +/* both modes "fully configurable" or "not fully configurable" are */ +/* available. */ +/* Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE (0x00000000UL) */ +/* ADC_SCAN_ENABLE (0x00000001UL) */ +/* Sequencer fully configurable with only rank 1 enabled is considered */ +/* as default setting equivalent to scan enable. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +#define ADC_SCAN_DISABLE (0x00000000UL) /*!< Sequencer set to fully configurable: only the rank 1 is enabled (no scan sequence on several ranks) */ +#define ADC_SCAN_ENABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer set to fully configurable: sequencer length and each rank affectation to a channel are configurable. */ + +#define ADC_SCAN_SEQ_FIXED (ADC_SCAN_SEQ_FIXED_INT) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_SEQ_FIXED_BACKWARD (ADC_SCAN_SEQ_FIXED_INT | ADC_CFGR1_SCANDIR) /*!< Sequencer set to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_DIRECTION_FORWARD (ADC_SCAN_SEQ_FIXED) /* For compatibility with other STM32 devices */ +#define ADC_SCAN_DIRECTION_BACKWARD (ADC_SCAN_SEQ_FIXED_BACKWARD) /* For compatibility with other STM32 devices */ + +#else #define ADC_SCAN_DISABLE (0x00000000UL) /*!< Scan mode disabled */ #define ADC_SCAN_ENABLE (0x00000001UL) /*!< Scan mode enabled */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -493,6 +574,14 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to */ /* ADC group regular trigger sources for all ADC instances */ #define ADC_SOFTWARE_START (LL_ADC_REG_TRIG_SOFTWARE) /*!< ADC group regular conversion trigger internal: SW start. */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T2_CC4 (LL_ADC_REG_TRIG_EXT_TIM2_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_T2_CC3 (LL_ADC_REG_TRIG_EXT_TIM2_CH3) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +#else #define ADC_EXTERNALTRIG_T1_TRGO (LL_ADC_REG_TRIG_EXT_TIM1_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ #define ADC_EXTERNALTRIG_T1_TRGO2 (LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */ #define ADC_EXTERNALTRIG_T1_CC1 (LL_ADC_REG_TRIG_EXT_TIM1_CH1) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ @@ -501,6 +590,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ #define ADC_EXTERNALTRIG_T2_CC2 (LL_ADC_REG_TRIG_EXT_TIM2_CH2) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ #define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +#endif /** * @} */ @@ -537,6 +627,19 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to /** @defgroup ADC_HAL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define ADC_RANK_CHANNEL_NUMBER (0x00000001U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ +#define ADC_RANK_NONE (0x00000002U) /*!< Setting relevant if parameter "ScanConvMode" is set to sequencer not fully configurable: Disable the selected rank (selected channel) from sequencer */ + +#define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ +#define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ +#define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ +#define ADC_REGULAR_RANK_4 (LL_ADC_REG_RANK_4) /*!< ADC group regular sequencer rank 4 */ +#define ADC_REGULAR_RANK_5 (LL_ADC_REG_RANK_5) /*!< ADC group regular sequencer rank 5 */ +#define ADC_REGULAR_RANK_6 (LL_ADC_REG_RANK_6) /*!< ADC group regular sequencer rank 6 */ +#define ADC_REGULAR_RANK_7 (LL_ADC_REG_RANK_7) /*!< ADC group regular sequencer rank 7 */ +#define ADC_REGULAR_RANK_8 (LL_ADC_REG_RANK_8) /*!< ADC group regular sequencer rank 8 */ +#else #define ADC_REGULAR_RANK_1 (LL_ADC_REG_RANK_1) /*!< ADC group regular sequencer rank 1 */ #define ADC_REGULAR_RANK_2 (LL_ADC_REG_RANK_2) /*!< ADC group regular sequencer rank 2 */ #define ADC_REGULAR_RANK_3 (LL_ADC_REG_RANK_3) /*!< ADC group regular sequencer rank 3 */ @@ -553,10 +656,36 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define ADC_REGULAR_RANK_14 (LL_ADC_REG_RANK_14) /*!< ADC group regular sequencer rank 14 */ #define ADC_REGULAR_RANK_15 (LL_ADC_REG_RANK_15) /*!< ADC group regular sequencer rank 15 */ #define ADC_REGULAR_RANK_16 (LL_ADC_REG_RANK_16) /*!< ADC group regular sequencer rank 16 */ +#endif +/** + * @} + */ + +#if defined (ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME ADC instance - Sampling time common to a group of channels + * @{ + */ +#define ADC_SAMPLINGTIME_COMMON_1 (LL_ADC_SAMPLINGTIME_COMMON_1) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define ADC_SAMPLINGTIME_COMMON_2 (LL_ADC_SAMPLINGTIME_COMMON_2) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ /** * @} */ +/** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME_INST_SCOPE Channel - Sampling time (ADC instance scope for sampling time common 1 or 2, not channel wise) + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 (LL_ADC_SAMPLINGTIME_1CYCLE_5) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_3CYCLES_5 (LL_ADC_SAMPLINGTIME_3CYCLES_5) /*!< Sampling time 3.5 ADC clock cycles */ +#define ADC_SAMPLETIME_7CYCLES_5 (LL_ADC_SAMPLINGTIME_7CYCLES_5) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_12CYCLES_5 (LL_ADC_SAMPLINGTIME_12CYCLES_5) /*!< Sampling time 12.5 ADC clock cycles */ +#define ADC_SAMPLETIME_19CYCLES_5 (LL_ADC_SAMPLINGTIME_19CYCLES_5) /*!< Sampling time 19.5 ADC clock cycles */ +#define ADC_SAMPLETIME_39CYCLES_5 (LL_ADC_SAMPLINGTIME_39CYCLES_5) /*!< Sampling time 39.5 ADC clock cycles */ +#define ADC_SAMPLETIME_79CYCLES_5 (LL_ADC_SAMPLINGTIME_79CYCLES_5) /*!< Sampling time 79.5 ADC clock cycles */ +#define ADC_SAMPLETIME_160CYCLES_5 (LL_ADC_SAMPLINGTIME_160CYCLES_5) /*!< Sampling time 160.5 ADC clock cycles */ +/** + * @} + */ +#else /** @defgroup ADC_HAL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time * @{ */ @@ -571,6 +700,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to /** * @} */ +#endif /** @defgroup ADC_HAL_EC_CHANNEL ADC instance - Channel number * @{ @@ -607,8 +737,12 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @{ */ #define ADC_ANALOGWATCHDOG_1 (LL_ADC_AWD1) /*!< ADC analog watchdog number 1 */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC analog watchdog 2 and 3" not available on ADC peripheral of this STM32WB device */ +#else #define ADC_ANALOGWATCHDOG_2 (LL_ADC_AWD2) /*!< ADC analog watchdog number 2 */ #define ADC_ANALOGWATCHDOG_3 (LL_ADC_AWD3) /*!< ADC analog watchdog number 3 */ +#endif /** * @} */ @@ -627,6 +761,9 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC oversampling" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_HAL_EC_OVS_RATIO Oversampling - Ratio * @{ */ @@ -657,6 +794,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to /** * @} */ +#endif /** @defgroup ADC_HAL_EC_OVS_DISCONT_MODE Oversampling - Discontinuous mode * @{ @@ -676,6 +814,17 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_HAL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define ADC_TRIGGER_FREQ_HIGH (LL_ADC_TRIGGER_FREQ_HIGH) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define ADC_TRIGGER_FREQ_LOW (LL_ADC_TRIGGER_FREQ_LOW) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ +#endif + /** @defgroup ADC_Event_type ADC Event type * @{ @@ -685,7 +834,9 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define ADC_AWD2_EVENT (ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 series) */ #define ADC_AWD3_EVENT (ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 series) */ #define ADC_OVR_EVENT (ADC_FLAG_OVR) /*!< ADC overrun event */ +#if !defined (ADC_SUPPORT_2_5_MSPS) #define ADC_JQOVF_EVENT (ADC_FLAG_JQOVF) /*!< ADC Injected Context Queue Overflow event */ +#endif /** * @} */ @@ -699,12 +850,17 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of regular conversion interrupt source */ #define ADC_IT_EOS ADC_IER_EOSIE /*!< ADC End of regular sequence of conversions interrupt source */ #define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC end of calibration interrupt source */ +#define ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC channel configuration ready interrupt source */ +#else #define ADC_IT_JEOC ADC_IER_JEOCIE /*!< ADC End of injected conversion interrupt source */ #define ADC_IT_JEOS ADC_IER_JEOSIE /*!< ADC End of injected sequence of conversions interrupt source */ +#define ADC_IT_JQOVF ADC_IER_JQOVFIE /*!< ADC Injected Context Queue Overflow interrupt source */ +#endif #define ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog) */ #define ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog) */ #define ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog) */ -#define ADC_IT_JQOVF ADC_IER_JQOVFIE /*!< ADC Injected Context Queue Overflow interrupt source */ #define ADC_IT_AWD ADC_IT_AWD1 /*!< ADC Analog watchdog 1 interrupt source: naming for compatibility with other STM32 devices having only one analog watchdog */ @@ -720,13 +876,17 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ #define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */ #define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC end of calibration flag */ +#define ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC channel configuration ready flag */ +#else #define ADC_FLAG_JEOC ADC_ISR_JEOC /*!< ADC End of Injected Conversion flag */ #define ADC_FLAG_JEOS ADC_ISR_JEOS /*!< ADC End of Injected sequence of Conversions flag */ +#define ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC Injected Context Queue Overflow flag */ +#endif #define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag (main analog watchdog) */ #define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag (additional analog watchdog) */ #define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag (additional analog watchdog) */ -#define ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC Injected Context Queue Overflow flag */ - /** * @} */ @@ -781,7 +941,11 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @param __LENGTH__ number of programmed conversions. * @retval SET (__LENGTH__ is within the maximum number of possible programmable regular conversions) or RESET (__LENGTH__ is null or too large) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_REGULAR_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (8UL))) +#else #define IS_ADC_REGULAR_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (16UL))) +#endif /** @@ -863,6 +1027,15 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @param __REGTRIG__ programmed ADC regular conversions external trigger. * @retval SET (__REGTRIG__ is a valid value) or RESET (__REGTRIG__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_EXTTRIG(__HANDLE__, __REGTRIG__) (((__REGTRIG__) == ADC_EXTERNALTRIG_T1_TRGO2) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC4) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_TRGO) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_CC4) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_CC3) || \ + ((__REGTRIG__) == ADC_EXTERNALTRIG_EXT_IT11) || \ + ((__REGTRIG__) == ADC_SOFTWARE_START) ) +#else #define IS_ADC_EXTTRIG(__HANDLE__, __REGTRIG__) (((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC1) || \ ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC2) || \ ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_CC3) || \ @@ -872,6 +1045,7 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to ((__REGTRIG__) == ADC_EXTERNALTRIG_T1_TRGO2) || \ ((__REGTRIG__) == ADC_EXTERNALTRIG_T2_TRGO) || \ ((__REGTRIG__) == ADC_SOFTWARE_START) ) +#endif /** * @brief Verify the ADC regular conversions check for converted data availability. @@ -889,11 +1063,26 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to #define IS_ADC_OVERRUN(__OVR__) (((__OVR__) == ADC_OVR_DATA_PRESERVED) || \ ((__OVR__) == ADC_OVR_DATA_OVERWRITTEN) ) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_SAMPLING_TIME_COMMON(SAMPLING_TIME_COMMON) (((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_1) || \ + ((SAMPLING_TIME_COMMON) == ADC_SAMPLINGTIME_COMMON_2) ) +#endif + /** * @brief Verify the ADC conversions sampling time. * @param __TIME__ ADC conversions sampling time. * @retval SET (__TIME__ is a valid value) or RESET (__TIME__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_SAMPLE_TIME(__TIME__) (((__TIME__) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((__TIME__) == ADC_SAMPLETIME_3CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_12CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_19CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_39CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_79CYCLES_5) || \ + ((__TIME__) == ADC_SAMPLETIME_160CYCLES_5) ) +#else #define IS_ADC_SAMPLE_TIME(__TIME__) (((__TIME__) == ADC_SAMPLETIME_2CYCLES_5) || \ ((__TIME__) == ADC_SAMPLETIME_6CYCLES_5) || \ ((__TIME__) == ADC_SAMPLETIME_12CYCLES_5) || \ @@ -902,28 +1091,45 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to ((__TIME__) == ADC_SAMPLETIME_92CYCLES_5) || \ ((__TIME__) == ADC_SAMPLETIME_247CYCLES_5) || \ ((__TIME__) == ADC_SAMPLETIME_640CYCLES_5) ) +#endif + +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_REGULAR_RANK_SEQ_FIXED(RANK) (((RANK) == ADC_RANK_CHANNEL_NUMBER) || \ + ((RANK) == ADC_RANK_NONE) ) +#endif /** * @brief Verify the ADC regular channel setting. - * @param __CHANNEL__ programmed ADC regular channel. - * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + * @param RANK programmed ADC regular channel. + * @retval SET (RANK is valid) or RESET (RANK is invalid) */ -#define IS_ADC_REGULAR_RANK(__CHANNEL__) (((__CHANNEL__) == ADC_REGULAR_RANK_1 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_2 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_3 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_4 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_5 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_6 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_7 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_8 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_9 ) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_10) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_11) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_12) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_13) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_14) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_15) || \ - ((__CHANNEL__) == ADC_REGULAR_RANK_16) ) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) ) +#else +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) == ADC_REGULAR_RANK_1 ) || \ + ((RANK) == ADC_REGULAR_RANK_2 ) || \ + ((RANK) == ADC_REGULAR_RANK_3 ) || \ + ((RANK) == ADC_REGULAR_RANK_4 ) || \ + ((RANK) == ADC_REGULAR_RANK_5 ) || \ + ((RANK) == ADC_REGULAR_RANK_6 ) || \ + ((RANK) == ADC_REGULAR_RANK_7 ) || \ + ((RANK) == ADC_REGULAR_RANK_8 ) || \ + ((RANK) == ADC_REGULAR_RANK_9 ) || \ + ((RANK) == ADC_REGULAR_RANK_10) || \ + ((RANK) == ADC_REGULAR_RANK_11) || \ + ((RANK) == ADC_REGULAR_RANK_12) || \ + ((RANK) == ADC_REGULAR_RANK_13) || \ + ((RANK) == ADC_REGULAR_RANK_14) || \ + ((RANK) == ADC_REGULAR_RANK_15) || \ + ((RANK) == ADC_REGULAR_RANK_16) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} @@ -950,6 +1156,10 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to /* Unit: us */ #define ADC_TEMPSENSOR_DELAY_US (LL_ADC_DELAY_TEMPSENSOR_STAB_US) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_SCAN_SEQ_FIXED_INT 0x80000000U /* Internal definition to differentiate sequencer setting fixed or configurable */ +#endif + /** * @} */ @@ -994,10 +1204,12 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_IT_OVR ADC overrun interrupt source * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) - * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ #define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ @@ -1015,10 +1227,12 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_IT_OVR ADC overrun interrupt source * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) - * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ #define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ @@ -1033,12 +1247,14 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_IT_EOC ADC End of Regular Conversion interrupt source * @arg @ref ADC_IT_EOS ADC End of Regular sequence of Conversions interrupt source * @arg @ref ADC_IT_OVR ADC overrun interrupt source - * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source - * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source + * @arg @ref ADC_IT_JEOC ADC End of Injected Conversion interrupt source (1) + * @arg @ref ADC_IT_JEOS ADC End of Injected sequence of Conversions interrupt source (1) + * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source (1) * @arg @ref ADC_IT_AWD1 ADC Analog watchdog 1 interrupt source (main analog watchdog) * @arg @ref ADC_IT_AWD2 ADC Analog watchdog 2 interrupt source (additional analog watchdog) * @arg @ref ADC_IT_AWD3 ADC Analog watchdog 3 interrupt source (additional analog watchdog) - * @arg @ref ADC_IT_JQOVF ADC Injected Context Queue Overflow interrupt source. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval State of interruption (SET or RESET) */ #define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ @@ -1054,12 +1270,14 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag * @arg @ref ADC_FLAG_OVR ADC overrun flag - * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag - * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag + * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag (1) + * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag (1) + * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag (1) * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) - * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval State of flag (TRUE or FALSE). */ #define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \ @@ -1075,12 +1293,14 @@ typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to * @arg @ref ADC_FLAG_EOC ADC End of Regular Conversion flag * @arg @ref ADC_FLAG_EOS ADC End of Regular sequence of Conversions flag * @arg @ref ADC_FLAG_OVR ADC overrun flag - * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag - * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag + * @arg @ref ADC_FLAG_JEOC ADC End of Injected Conversion flag (1) + * @arg @ref ADC_FLAG_JEOS ADC End of Injected sequence of Conversions flag (1) + * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag (1) * @arg @ref ADC_FLAG_AWD1 ADC Analog watchdog 1 flag (main analog watchdog) * @arg @ref ADC_FLAG_AWD2 ADC Analog watchdog 2 flag (additional analog watchdog) * @arg @ref ADC_FLAG_AWD3 ADC Analog watchdog 3 flag (additional analog watchdog) - * @arg @ref ADC_FLAG_JQOVF ADC Injected Context Queue Overflow flag. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ /* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h index 2bf99de405..59864e5dfd 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_adc_ex.h @@ -41,6 +41,9 @@ extern "C" { * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief ADC Injected Conversion Oversampling structure definition */ @@ -170,6 +173,7 @@ typedef struct Caution: this setting overwrites the previous oversampling configuration if oversampling already enabled. Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ } ADC_InjectionConfTypeDef; +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} @@ -181,6 +185,9 @@ typedef struct * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_injected_external_trigger_source ADC group injected trigger source * @{ */ @@ -206,12 +213,15 @@ typedef struct /** * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending * @{ */ #define ADC_SINGLE_ENDED (LL_ADC_SINGLE_ENDED) /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */ +#if !defined (ADC_SUPPORT_2_5_MSPS) #define ADC_DIFFERENTIAL_ENDED (LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to differential (literal also used to set calibration mode) */ +#endif /** * @} */ @@ -228,6 +238,9 @@ typedef struct * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks * @{ */ @@ -238,13 +251,18 @@ typedef struct /** * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups * @{ */ #define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else #define ADC_INJECTED_GROUP (LL_ADC_GROUP_INJECTED) /*!< ADC group injected (not available on all STM32 devices)*/ #define ADC_REGULAR_INJECTED_GROUP (LL_ADC_GROUP_REGULAR_INJECTED) /*!< ADC both groups regular and injected */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -315,6 +333,9 @@ typedef struct */ #define ADC_IS_INDEPENDENT(__HANDLE__) (SET) +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Set the selected injected Channel rank. * @param __CHANNELNB__ Channel number. @@ -336,6 +357,7 @@ typedef struct * @retval None */ #define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) ((__INJECT_DISCONTINUOUS_MODE__) << ADC_CFGR_JDISCEN_Pos) +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Configure ADC discontinuous conversion mode for regular group @@ -365,6 +387,47 @@ typedef struct */ #define ADC_CFGR_CONTINUOUS(__CONTINUOUS_MODE__) ((__CONTINUOUS_MODE__) << ADC_CFGR_CONT_Pos) +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_ Overrun mode. + * @retval Overun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */ +/* as the default case to be compliant with other STM32 devices. */ +#define ADC_CFGR_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000UL) \ + ) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_ Auto off bit enable or disable. + * @retval None + */ +#define ADC_CFGR_AUTOOFF(_AUTOOFF_) \ + ((_AUTOOFF_) << 15UL) + +/** + * @brief Set ADC scan mode with differentiation of sequencer setting + * fixed or configurable + * @param _SCAN_MODE_ Scan conversion mode. + * @retval None + */ +/* Note: Scan mode set using this macro (instead of parameter direct set) */ +/* due to different modes on other STM32 devices: */ +/* if scan mode is disabled, sequencer is set to fully configurable */ +/* with setting of only rank 1 enabled afterwards. */ +#define ADC_SCAN_SEQ_MODE(_SCAN_MODE_) \ + ( (((_SCAN_MODE_) & ADC_SCAN_SEQ_FIXED_INT) != 0UL \ + )? \ + ((_SCAN_MODE_) & (~ADC_SCAN_SEQ_FIXED_INT)) \ + : \ + (ADC_CFGR1_CHSELRMOD) \ + ) + +#endif /** * @brief Configure the ADC DMA continuous request. * @param __DMACONTREQ_MODE__ DMA continuous request mode. @@ -400,8 +463,13 @@ typedef struct * @param __THRESHOLD__ Value to be shifted * @retval None */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3UL) * 2UL)) +#else #define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) +#endif /** * @brief Shift the AWD2 and AWD3 threshold with respect to the selected ADC resolution. @@ -414,22 +482,38 @@ typedef struct * @param __THRESHOLD__ Value to be shifted * @retval None */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) != (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0)) ? \ + ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ + ((__THRESHOLD__) << 2UL) \ + ) +#else #define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0)) ? \ ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ ((__THRESHOLD__) << 2UL) \ ) +#endif /** * @brief Clear Common Control Register. * @param __HANDLE__ ADC handle. * @retval None */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, \ + ADC_CCR_PRESC | \ + ADC_CCR_VBATEN | \ + ADC_CCR_TSEN | \ + ADC_CCR_VREFEN ) +#else #define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, ADC_CCR_CKMODE | \ ADC_CCR_PRESC | \ ADC_CCR_VBATEN | \ ADC_CCR_TSEN | \ ADC_CCR_VREFEN ) +#endif /** @@ -453,12 +537,16 @@ typedef struct */ #define ADC_VREFINT_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Verify the length of scheduled injected conversions group. * @param __LENGTH__ number of programmed conversions. * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions) or RESET (__LENGTH__ is null or too large) */ #define IS_ADC_INJECTED_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1U)) && ((__LENGTH__) <= (4U))) +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Calibration factor size verification (7 bits maximum). @@ -525,8 +613,12 @@ typedef struct * @param __SING_DIFF__ programmed channel setting. * @retval SET (__SING_DIFF__ is valid) or RESET (__SING_DIFF__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_SINGLE_DIFFERENTIAL(__SING_DIFF__) ((__SING_DIFF__) == ADC_SINGLE_ENDED) +#else #define IS_ADC_SINGLE_DIFFERENTIAL(__SING_DIFF__) (((__SING_DIFF__) == ADC_SINGLE_ENDED) || \ ((__SING_DIFF__) == ADC_DIFFERENTIAL_ENDED) ) +#endif /** * @brief Verify the ADC offset management setting. @@ -539,6 +631,9 @@ typedef struct ((__OFFSET_NUMBER__) == ADC_OFFSET_3) || \ ((__OFFSET_NUMBER__) == ADC_OFFSET_4) ) +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Verify the ADC injected channel setting. * @param __CHANNEL__ programmed ADC injected channel. @@ -572,21 +667,31 @@ typedef struct ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Verify the ADC analog watchdog setting. * @param __WATCHDOG__ programmed ADC analog watchdog setting. * @retval SET (__WATCHDOG__ is valid) or RESET (__WATCHDOG__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(__WATCHDOG__) ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_1) +#else #define IS_ADC_ANALOG_WATCHDOG_NUMBER(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_1) || \ ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_2) || \ ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_3) ) +#endif /** * @brief Verify the ADC analog watchdog mode setting. * @param __WATCHDOG_MODE__ programmed ADC analog watchdog mode setting. * @retval SET (__WATCHDOG_MODE__ is valid) or RESET (__WATCHDOG_MODE__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG) ) +#else #define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE) || \ ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ @@ -594,6 +699,12 @@ typedef struct ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG) || \ ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ + +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_TRIGGER_FREQ(TRIGGER_FREQ) (((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_HIGH) || \ + ((TRIGGER_FREQ) == LL_ADC_TRIGGER_FREQ_LOW) ) +#endif /** * @brief Verify the ADC conversion (regular or injected or both). @@ -609,13 +720,24 @@ typedef struct * @param __EVENT__ ADC event. * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ + ((__EVENT__) == ADC_AWD1_EVENT) || \ + ((__EVENT__) == ADC_AWD2_EVENT) || \ + ((__EVENT__) == ADC_AWD3_EVENT) || \ + ((__EVENT__) == ADC_OVR_EVENT) ) +#else #define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ ((__EVENT__) == ADC_AWD_EVENT) || \ ((__EVENT__) == ADC_AWD2_EVENT) || \ ((__EVENT__) == ADC_AWD3_EVENT) || \ ((__EVENT__) == ADC_OVR_EVENT) || \ ((__EVENT__) == ADC_JQOVF_EVENT) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC oversampling" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Verify the ADC oversampling ratio. * @param __RATIO__ programmed ADC oversampling ratio. @@ -629,6 +751,7 @@ typedef struct ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) +#endif /** * @brief Verify the ADC oversampling shift. @@ -653,6 +776,8 @@ typedef struct #define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) +#if defined (ADC_SUPPORT_2_5_MSPS) +#else /** * @brief Verify the ADC oversampling regular conversion resumed or continued mode. * @param __MODE__ programmed ADC oversampling regular conversion resumed or continued mode. @@ -660,6 +785,7 @@ typedef struct */ #define IS_ADC_REGOVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_REGOVERSAMPLING_CONTINUED_MODE) || \ ((__MODE__) == ADC_REGOVERSAMPLING_RESUMED_MODE) ) +#endif /** * @brief Verify the DFSDM mode configuration. @@ -702,6 +828,9 @@ uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor); +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc); @@ -710,21 +839,34 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *h /* Non-blocking mode: Interruption */ HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc); +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* ADC retrieve conversion value intended to be used with polling or interruption */ uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc); void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc); +#endif /* ADC_SUPPORT_2_5_MSPS */ void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* ADC group regular conversions stop */ HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc); +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -733,11 +875,23 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc); * @{ */ /* Peripheral Control functions ***********************************************/ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc,ADC_InjectionConfTypeDef* sConfigInjected); +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc); HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc); +#endif /* ADC_SUPPORT_2_5_MSPS */ HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature " ADC deep power-down" not available on ADC peripheral of this STM32WB device */ +#else HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc); +#endif /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h index 914d08003a..a9bf449ec2 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_comp.h @@ -181,7 +181,11 @@ typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer /** @defgroup COMP_InputPlus COMP input plus (non-inverting input) * @{ */ -#define COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1 (except device STM32WB35xx), pin PB4 for COMP2) */ +#if defined(STM32WB15xx) || defined(STM32WB10xx) +/* COMP_INPUT_PLUS_IO1 not available on this device */ +#else +#define COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1 (except device STM32WB35xx), pin PB4 for COMP2). Note: On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ +#endif #define COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */ #define COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */ /** @@ -196,7 +200,11 @@ typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer #define COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */ #define COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */ #define COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */ -#define COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1 (except device STM32WB35xx), pin PB7 for COMP2) */ +#if defined(STM32WB15xx) || defined(STM32WB10xx) +/* COMP_INPUT_MINUS_IO2 not available on this device */ +#else +#define COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1 (except device STM32WB35xx), pin PB7 for COMP2). Note: On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ +#endif #define COMP_INPUT_MINUS_IO3 ( COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */ #define COMP_INPUT_MINUS_IO4 (COMP_CSR_INMESEL_1 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO4 (pin PA4 for COMP1, pin PA4 for COMP2) */ #define COMP_INPUT_MINUS_IO5 (COMP_CSR_INMESEL_1 | COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO5 (pin PA5 for COMP1, pin PA5 for COMP2) */ @@ -595,7 +603,7 @@ typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3)) #endif -/* Note: On this STM32 serie, comparator input minus parameters are */ +/* Note: On this STM32 series, comparator input minus parameters are */ /* the same on all COMP instances. */ /* However, comparator instance kept as macro parameter for */ /* compatibility with other STM32 families. */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h index 72c9b3b716..b78c5cb83d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_conf_template.h @@ -44,7 +44,6 @@ #define HAL_GPIO_MODULE_ENABLED #define HAL_HSEM_MODULE_ENABLED #define HAL_I2C_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED #define HAL_IPCC_MODULE_ENABLED #define HAL_IRDA_MODULE_ENABLED #define HAL_IWDG_MODULE_ENABLED @@ -71,7 +70,6 @@ #define USE_HAL_COMP_REGISTER_CALLBACKS 0u #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u #define USE_HAL_I2C_REGISTER_CALLBACKS 0u -#define USE_HAL_I2C_REGISTER_CALLBACKS 0u #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u #define USE_HAL_PCD_REGISTER_CALLBACKS 0u @@ -89,6 +87,8 @@ #define USE_HAL_USART_REGISTER_CALLBACKS 0u #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_SUSPEND_RESUME 0u + /* ########################## Oscillator Values adaptation ####################*/ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. @@ -159,15 +159,6 @@ #endif /* LSE_STARTUP_TIMEOUT */ /** - * @brief External clock source for I2S peripheral - * This value is used by the RCC HAL module to compute the I2S clock source - * frequency. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) -#define EXTERNAL_CLOCK_VALUE (48000UL) /*!< Value of the I2S External clock source in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/** * @brief External clock source for SAI1 peripheral * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. @@ -254,10 +245,6 @@ #include "stm32wbxx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32wbxx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - #ifdef HAL_IPCC_MODULE_ENABLED #include "stm32wbxx_hal_ipcc.h" #endif /* HAL_IPCC_MODULE_ENABLED */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h index 62c8b2d934..4dabd501b4 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_cryp.h @@ -109,7 +109,7 @@ typedef struct __CRYP_HandleTypeDef typedef struct #endif { - AES_TypeDef *Instance; /*!< AES Register base address */ + AES_TypeDef *Instance; /*!< AES Register base address */ CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ @@ -120,13 +120,13 @@ typedef struct uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ - __IO uint16_t CrypHeaderCount; /*!< Counter of header data */ + __IO uint16_t CrypHeaderCount; /*!< Counter of header data in words */ - __IO uint16_t CrypInCount; /*!< Counter of input data */ + __IO uint16_t CrypInCount; /*!< Counter of input data in words */ - __IO uint16_t CrypOutCount; /*!< Counter of output data */ + __IO uint16_t CrypOutCount; /*!< Counter of output data in words */ - uint16_t Size; /*!< length of input data in words */ + uint16_t Size; /*!< Length of input data */ uint32_t Phase; /*!< CRYP peripheral phase */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h index 7d4af2e050..f6a0e6bf71 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_def.h @@ -54,8 +54,9 @@ typedef enum } HAL_LockTypeDef; /* Exported macros -----------------------------------------------------------*/ - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#ifndef UNUSED +#define UNUSED(X) (void)(X) /* To avoid gcc/g++ warnings */ +#endif #define HAL_MAX_DELAY 0xFFFFFFFFU @@ -107,7 +108,15 @@ typedef enum }while (0) #endif /* USE_RTOS */ -#if defined ( __GNUC__ ) + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ #ifndef __weak #define __weak __attribute__((weak)) #endif /* __weak */ @@ -118,8 +127,14 @@ typedef enum /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -/* GNU Compiler */ -#if defined (__GNUC__) +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ #ifndef __ALIGN_END #define __ALIGN_END __attribute__ ((aligned (4))) #endif /* __ALIGN_END */ @@ -131,11 +146,9 @@ typedef enum #define __ALIGN_END #endif /* __ALIGN_END */ #ifndef __ALIGN_BEGIN - /* ARM Compiler */ - #if defined (__CC_ARM) + #if defined (__CC_ARM) /* ARM Compiler V5 */ #define __ALIGN_BEGIN __align(4) - /* IAR Compiler */ - #elif defined (__ICCARM__) + #elif defined (__ICCARM__) /* IAR Compiler */ #define __ALIGN_BEGIN #endif /* __CC_ARM */ #endif /* __ALIGN_BEGIN */ @@ -144,9 +157,9 @@ typedef enum /** * @brief __RAM_FUNC definition */ -#if defined ( __CC_ARM ) -/* ARM Compiler - ------------ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- RAM functions are defined using the toolchain options. Functions that are executed in RAM should reside in a separate source module. Using the 'Options for File' dialog you can simply change the 'Code / Const' @@ -176,9 +189,9 @@ typedef enum /** * @brief __NOINLINE definition */ -#if defined ( __CC_ARM ) || defined ( __GNUC__ ) -/* ARM & GNUCompiler - ---------------- +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- */ #define __NOINLINE __attribute__ ( (noinline) ) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h index 2c12b6ae3d..40a9b67c8b 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_exti.h @@ -105,7 +105,7 @@ typedef struct #define EXTI_LINE_17 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x11u) #define EXTI_LINE_18 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x12u) #define EXTI_LINE_19 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x13u) -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define EXTI_LINE_20 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | 0x14u) #else #define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u) @@ -122,7 +122,7 @@ typedef struct #define EXTI_LINE_23 (EXTI_RESERVED | EXTI_REG1 | 0x17u) #endif #define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u) -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u) #else #define EXTI_LINE_25 (EXTI_RESERVED | EXTI_REG1 | 0x19u) @@ -136,7 +136,7 @@ typedef struct #endif #define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du) #define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu) -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define EXTI_LINE_31 (EXTI_CONFIG | EXTI_REG1 | 0x1Fu) #else #define EXTI_LINE_31 (EXTI_RESERVED | EXTI_REG1 | 0x1Fu) @@ -273,21 +273,21 @@ typedef struct /** @defgroup EXTI_Private_Macros EXTI Private Macros * @{ */ -#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ - ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ - (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ - (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ - (((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) -#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \ - (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u)) +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) -#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) -#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING) +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) -#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u) +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) #if defined (STM32WB55xx) || defined (STM32WB5Mxx) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h index 683e0f2a1b..993f1972e0 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_flash.h @@ -75,6 +75,7 @@ typedef struct uint32_t UserConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). This parameter can be a combination of the values of @ref FLASH_OB_USER_AGC_TRIM, @ref FLASH_OB_USER_BOR_LEVEL + @ref FLASH_OB_USER_RESET_CONFIG(*), @ref FLASH_OB_USER_INPUT_RESET_HOLDER(*) @ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY, @ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW, @ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY, @@ -280,6 +281,9 @@ typedef struct #define OB_USER_nRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering the stop mode */ #define OB_USER_nRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering the standby mode */ #define OB_USER_nRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering the shutdown mode */ +#if defined(FLASH_OPTR_IRHEN) +#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */ +#endif #define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */ #define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter freeze in stop mode */ #define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter freeze in standby mode */ @@ -289,12 +293,24 @@ typedef struct #define OB_USER_SRAM2RST FLASH_OPTR_SRAM2RST /*!< SRAM2 erase when system reset */ #define OB_USER_nSWBOOT0 FLASH_OPTR_nSWBOOT0 /*!< Software BOOT0 */ #define OB_USER_nBOOT0 FLASH_OPTR_nBOOT0 /*!< nBOOT0 option bit */ +#if defined(FLASH_OPTR_nRST_MODE) +#define OB_USER_NRST_MODE FLASH_OPTR_nRST_MODE /*!< Reset pin configuration */ +#endif #define OB_USER_AGC_TRIM FLASH_OPTR_AGC_TRIM /*!< Automatic Gain Control Trimming */ +#if defined(FLASH_OPTR_IRHEN) && defined(FLASH_OPTR_nRST_MODE) +#define OB_USER_ALL (OB_USER_BOR_LEV | OB_USER_nRST_STOP | OB_USER_nRST_STDBY | \ + OB_USER_nRST_SHDW | OB_USER_IWDG_SW | OB_USER_IWDG_STOP | \ + OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | OB_USER_nBOOT1 | \ + OB_USER_SRAM2PE | OB_USER_SRAM2RST | OB_USER_nSWBOOT0 | \ + OB_USER_nBOOT0 | OB_USER_AGC_TRIM | OB_USER_NRST_MODE | \ + OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */ +#else #define OB_USER_ALL (OB_USER_BOR_LEV | OB_USER_nRST_STOP | OB_USER_nRST_STDBY | \ OB_USER_nRST_SHDW | OB_USER_IWDG_SW | OB_USER_IWDG_STOP | \ OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | OB_USER_nBOOT1 | \ OB_USER_SRAM2PE | OB_USER_SRAM2RST | OB_USER_nSWBOOT0 | \ OB_USER_nBOOT0 | OB_USER_AGC_TRIM) /*!< all option bits */ +#endif /** * @} @@ -435,6 +451,29 @@ typedef struct * @} */ +#if defined(FLASH_OPTR_nRST_MODE) +/** @defgroup FLASH_OB_USER_RESET_CONFIG FLASH Option Bytes User reset config bit + * @{ + */ +#define OB_RESET_MODE_INPUT_ONLY FLASH_OPTR_nRST_MODE_0 /*!< Reset pin is in Reset input mode only */ +#define OB_RESET_MODE_GPIO FLASH_OPTR_nRST_MODE_1 /*!< Reset pin is in GPIO normal mode only */ +#define OB_RESET_MODE_INPUT_OUTPUT (FLASH_OPTR_nRST_MODE_0 | FLASH_OPTR_nRST_MODE_1) /*!< Reset pin is in Reset input and output mode */ +/** + * @} + */ +#endif + +#if defined(FLASH_OPTR_IRHEN) +/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit + * @{ + */ +#define OB_IRH_ENABLE 0x00000000U /*!< Internal Reset handler enable */ +#define OB_IRH_DISABLE FLASH_OPTR_IRHEN /*!< Internal Reset handler disable */ +/** + * @} + */ +#endif + /** @defgroup FLASH_OB_PCROP_ZONE FLASH PCROP ZONE * @{ */ @@ -526,6 +565,7 @@ typedef struct #define SRAM2B_START_SECURE_ADDR_1 (SRAM2B_BASE + 0x0400U) /* When in secure mode (SRAM2B_BASE + 0x0400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_START_SECURE_ADDR_2 (SRAM2B_BASE + 0x0800U) /* When in secure mode (SRAM2B_BASE + 0x0800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_START_SECURE_ADDR_3 (SRAM2B_BASE + 0x0C00U) /* When in secure mode (SRAM2B_BASE + 0x0C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ +#if !defined(STM32WB15xx) #define SRAM2B_START_SECURE_ADDR_4 (SRAM2B_BASE + 0x1000U) /* When in secure mode (SRAM2B_BASE + 0x1000) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_START_SECURE_ADDR_5 (SRAM2B_BASE + 0x1400U) /* When in secure mode (SRAM2B_BASE + 0x1400) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_START_SECURE_ADDR_6 (SRAM2B_BASE + 0x1800U) /* When in secure mode (SRAM2B_BASE + 0x1800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ @@ -555,6 +595,9 @@ typedef struct #define SRAM2B_START_SECURE_ADDR_30 (SRAM2B_BASE + 0x7800U) /* When in secure mode (SRAM2B_BASE + 0x7800) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_START_SECURE_ADDR_31 (SRAM2B_BASE + 0x7C00U) /* When in secure mode (SRAM2B_BASE + 0x7C00) -> SRAM2B_END_ADDR is accessible only by M0 Plus */ #define SRAM2B_FULL_UNSECURE (SRAM2B_BASE + 0x8000U) /* The RAM2B is accessible to M0 Plus and M4 */ +#else +#define SRAM2B_FULL_UNSECURE (SRAM2B_BASE + 0x0C00U) /* The RAM2B is accessible to M0 Plus and M4 */ +#endif /** * @} @@ -813,12 +856,21 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); #define FLASH_END_ADDR (FLASH_BASE + FLASH_SIZE - 1U) #define FLASH_BANK_SIZE FLASH_SIZE /*!< FLASH Bank Size */ +#if defined(STM32WB15xx) +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2 KBytes */ +#else #define FLASH_PAGE_SIZE 0x00001000U /*!< FLASH Page Size, 4 KBytes */ +#endif #define FLASH_PAGE_NB (FLASH_SIZE / FLASH_PAGE_SIZE) #define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ +#if defined(STM32WB15xx) +#define FLASH_PCROP_GRANULARITY_OFFSET 10U /*!< FLASH Code Readout Protection granularity offset */ +#define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 1 KBytes */ +#else #define FLASH_PCROP_GRANULARITY_OFFSET 11U /*!< FLASH Code Readout Protection granularity offset */ #define FLASH_PCROP_GRANULARITY (1UL << FLASH_PCROP_GRANULARITY_OFFSET) /*!< FLASH Code Readout Protection granularity, 2 KBytes */ +#endif #define FLASH_TYPENONE 0x00000000U /*!< No Programmation Procedure On Going */ /** @@ -857,7 +909,7 @@ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); #define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ ((__VALUE__) == FLASH_TYPEPROGRAM_FAST)) -#define IS_OB_SFSA_START_ADDR(__VALUE__) (((__VALUE__) >= FLASH_BASE) && ((__VALUE__) <= FLASH_END_ADDR) && (((__VALUE__) & ~(uint32_t)0xFFFU) == (__VALUE__))) +#define IS_OB_SFSA_START_ADDR(__VALUE__) (((__VALUE__) >= FLASH_BASE) && ((__VALUE__) <= FLASH_END_ADDR) && (((__VALUE__) & ~(uint32_t)(FLASH_PAGE_SIZE - 1U)) == (__VALUE__))) #define IS_OB_SBRSA_START_ADDR(__VALUE__) (((__VALUE__) >= SRAM2A_BASE) && ((__VALUE__) <= (SRAM2A_BASE + SRAM2A_SIZE - 1U)) && (((__VALUE__) & ~0x3FFU) == (__VALUE__))) #define IS_OB_SNBRSA_START_ADDR(__VALUE__) (((__VALUE__) >= SRAM2B_BASE) && ((__VALUE__) <= (SRAM2B_BASE + SRAM2B_SIZE - 1U)) && (((__VALUE__) & ~0x3FFU) == (__VALUE__))) #define IS_OB_SECURE_MODE(__VALUE__) (((__VALUE__) == SYSTEM_IN_SECURE_MODE) || ((__VALUE__) == SYSTEM_NOT_IN_SECURE_MODE)) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h index 709184f295..6244e46bb6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_gpio_ex.h @@ -521,6 +521,110 @@ #endif +#if defined (STM32WB15xx) || defined (STM32WB10xx) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF0_LSCO ((uint8_t)0x00) /*!< LSCO Alternate Function mapping */ +#define GPIO_AF0_JTMS_SWDIO ((uint8_t)0x00) /*!< JTMS-SWDIO Alternate Function mapping */ +#define GPIO_AF0_JTCK_SWCLK ((uint8_t)0x00) /*!< JTCK-SWCLK Alternate Function mapping */ +#define GPIO_AF0_JTDI ((uint8_t)0x00) /*!< JTDI Alternate Function mapping */ +#define GPIO_AF0_RTC_OUT ((uint8_t)0x00) /*!< RCT_OUT Alternate Function mapping */ +#define GPIO_AF0_JTD_TRACE ((uint8_t)0x00) /*!< JTDO-TRACESWO Alternate Function mapping */ +#define GPIO_AF0_NJTRST ((uint8_t)0x00) /*!< NJTRST Alternate Function mapping */ + + /** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /*!< TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /*!< LPTIM1 Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM1 ((uint8_t)0x03) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF4_SPI1 ((uint8_t)0x04) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_MCO ((uint8_t)0x06) /*!< MCO Alternate Function mapping */ +#define GPIO_AF6_RF_DTB0 ((uint8_t)0x06) /*!< RF_DTB0 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB1 ((uint8_t)0x06) /*!< RF_DTB1 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB2 ((uint8_t)0x06) /*!< RF_DTB2 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB3 ((uint8_t)0x06) /*!< RF_DTB3 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB4 ((uint8_t)0x06) /*!< RF_DTB4 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB5 ((uint8_t)0x06) /*!< RF_DTB5 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB6 ((uint8_t)0x06) /*!< RF_DTB6 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB7 ((uint8_t)0x06) /*!< RF_DTB7 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB8 ((uint8_t)0x06) /*!< RF_DTB8 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB9 ((uint8_t)0x06) /*!< RF_DTB9 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB10 ((uint8_t)0x06) /*!< RF_DTB10 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB11 ((uint8_t)0x06) /*!< RF_DTB11 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB12 ((uint8_t)0x06) /*!< RF_DTB12 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB13 ((uint8_t)0x06) /*!< RF_DTB13 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB14 ((uint8_t)0x06) /*!< RF_DTB14 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB15 ((uint8_t)0x06) /*!< RF_DTB15 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB16 ((uint8_t)0x06) /*!< RF_DTB16 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB17 ((uint8_t)0x06) /*!< RF_DTB17 Alternate Function mapping */ +#define GPIO_AF6_RF_DTB18 ((uint8_t)0x06) /*!< RF_DTB18 Alternate Function mapping */ +#define GPIO_AF6_RF_MISO ((uint8_t)0x06) /*!< RF_MISO Alternate Function mapping */ +#define GPIO_AF6_RF_MOSI ((uint8_t)0x06) /*!< RF_MOSI Alternate Function mapping */ +#define GPIO_AF6_RF_SCK ((uint8_t)0x06) /*!< RF_SCK Alternate Function mapping */ +#define GPIO_AF6_RF_NSS ((uint8_t)0x06) /*!< RF_NSS Alternate Function mapping */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /*!< LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ + #define GPIO_AF9_TSC ((uint8_t)0x09) /*!< TSC Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0c) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF12_TIM1 ((uint8_t)0x0c) /*!< TIM1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0e) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0e) /*!< LPTIM2 Alternate Function mapping */ + + +/** +* @brief AF 15 selection +*/ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0f) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0f) +#endif /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h index 1ae6f86496..9cdef10417 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_i2c_ex.h @@ -38,7 +38,6 @@ extern "C" { /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ - /** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants * @{ */ @@ -75,24 +74,51 @@ extern "C" { */ /* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ /** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions * @{ */ -/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions +/** @addtogroup I2CEx_Exported_Functions_Group1 I2C Extended Filter Mode Functions * @{ */ - /* Peripheral Control functions ************************************************/ HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 I2C Extended WakeUp Mode Functions + * @{ + */ HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 I2C Extended FastModePlus Functions + * @{ + */ void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + + +/** + * @} + */ /* Private constants ---------------------------------------------------------*/ /** @defgroup I2CEx_Private_Constants I2C Extended Private Constants @@ -118,9 +144,6 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)) - - - /** * @} */ @@ -142,14 +165,6 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); * @} */ -/** - * @} - */ - -/** - * @} - */ - #ifdef __cplusplus } #endif diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_irda.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_irda.h index b22deb5aee..e4056e72b6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_irda.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_irda.h @@ -78,7 +78,8 @@ typedef struct /** * @brief HAL IRDA State definition - * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState (see @ref IRDA_State_Definition). + * @note HAL IRDA State value is a combination of 2 different substates: + * gState and RxState (see @ref IRDA_State_Definition). * - gState contains IRDA state information related to global Handle management * and also information related to Tx operations. * gState value coding follow below described bitmap : @@ -87,14 +88,14 @@ typedef struct * 01 : (Not Used) * 10 : Timeout * 11 : Error - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized. HAL IRDA Init function already called) + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called) * b4-b3 (not used) * xx : Should be set to 00 * b2 Intrinsic process state * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) + * 1 : Busy (Peripheral busy with some configuration or internal operations) * b1 (not used) * x : Should be set to 0 * b0 Tx state @@ -104,9 +105,9 @@ typedef struct * RxState value coding follow below described bitmap : * b7-b6 (not used) * xx : Should be set to 00 - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized) + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) * b4-b2 (not used) * xxx : Should be set to 000 * b1 Rx state diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h index b582b80993..1db4805f0d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_lptim.h @@ -384,10 +384,10 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin */ #if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) #define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) + (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) #else #define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET) #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ @@ -537,13 +537,16 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin * @retval Interrupt status. */ -#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) +#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) #define __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM1) -#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1)) +#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1\ + &= ~(LPTIM_EXTI_LINE_LPTIM1)) #define __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT() (EXTI->IMR1 |= LPTIM_EXTI_LINE_LPTIM2) -#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2)) +#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1\ + &= ~(LPTIM_EXTI_LINE_LPTIM2)) /** * @} @@ -555,9 +558,9 @@ typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< poin */ /** @addtogroup LPTIM_Exported_Functions_Group1 - * @brief Initialization and Configuration functions. - * @{ - */ + * @brief Initialization and Configuration functions. + * @{ + */ /* Initialization/de-initialization functions ********************************/ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim); HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim); @@ -570,9 +573,9 @@ void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim); */ /** @addtogroup LPTIM_Exported_Functions_Group2 - * @brief Start-Stop operation functions. - * @{ - */ + * @brief Start-Stop operation functions. + * @{ + */ /* Start/Stop operation functions *********************************************/ /* ################################# PWM Mode ################################*/ /* Blocking mode: Polling */ @@ -626,9 +629,9 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim); */ /** @addtogroup LPTIM_Exported_Functions_Group3 - * @brief Read operation functions. - * @{ - */ + * @brief Read operation functions. + * @{ + */ /* Reading operation functions ************************************************/ uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim); uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim); @@ -638,9 +641,9 @@ uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim); */ /** @addtogroup LPTIM_Exported_Functions_Group4 - * @brief LPTIM IRQ handler and callback functions. - * @{ - */ + * @brief LPTIM IRQ handler and callback functions. + * @{ + */ /* LPTIM IRQ functions *******************************************************/ void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim); @@ -655,17 +658,20 @@ void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID, + pLPTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlptim, + HAL_LPTIM_CallbackIDTypeDef CallbackID); #endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */ /** * @} */ /** @addtogroup LPTIM_Group5 - * @brief Peripheral State functions. - * @{ - */ + * @brief Peripheral State functions. + * @{ + */ /* Peripheral State functions ************************************************/ HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); /** @@ -771,43 +777,43 @@ HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim); #if defined(COMP1) #if defined(COMP2) #define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \ - ((((__INSTANCE__) == LPTIM1) && \ - (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \ - || \ - (((__INSTANCE__) == LPTIM2) && \ - (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2)))) + ((((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2)))) #else #define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \ - ((((__INSTANCE__) == LPTIM1) && \ - (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \ - || \ - (((__INSTANCE__) == LPTIM2) && \ - (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1)))) + ((((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1)))) #endif #else #define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \ - ((((__INSTANCE__) == LPTIM1) && \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) ) \ - || \ - (((__INSTANCE__) == LPTIM2) && \ - ((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO))) + ((((__INSTANCE__) == LPTIM1) && \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) ) \ + || \ + (((__INSTANCE__) == LPTIM2) && \ + ((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO))) #endif #if defined(COMP2) #define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \ - (((__INSTANCE__) == LPTIM1) && \ - (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \ - ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2))) + (((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \ + ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2))) #else #define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \ - (((__INSTANCE__) == LPTIM1) && \ - (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO))) + (((__INSTANCE__) == LPTIM1) && \ + (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO))) #endif /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h index 07b918a950..7123457be9 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd.h @@ -99,16 +99,16 @@ typedef struct __PCD_HandleTypeDef typedef struct #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ { - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - __IO uint8_t USB_Address; /*!< USB Address */ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - __IO uint32_t ErrorCode; /*!< PCD Error code */ - uint32_t Setup[12]; /*!< Setup packet buffer */ - PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ uint32_t BESL; @@ -188,9 +188,9 @@ typedef struct /* Exported macros -----------------------------------------------------------*/ /** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ #define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) @@ -233,7 +233,7 @@ typedef enum HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ - HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ @@ -260,25 +260,41 @@ typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgType * @} */ -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback); HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, + pPCD_BcdCallbackTypeDef pCallback); + HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, + pPCD_LpmCallbackTypeDef pCallback); + HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ /** @@ -317,16 +333,24 @@ void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type); + HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint8_t *pBuf, uint32_t len); + + HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); /** * @} */ @@ -353,7 +377,7 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); */ -#define USB_WAKEUP_EXTI_LINE (0x1U << 28) /*!< USB FS EXTI Line WakeUp Interrupt */ +#define USB_WAKEUP_EXTI_LINE (0x1U << 28) /*!< USB FS EXTI Line WakeUp Interrupt */ /** @@ -363,10 +387,10 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); /** @defgroup PCD_EP0_MPS PCD EP0 MPS * @{ */ -#define PCD_EP0MPS_64 DEP0CTL_MPS_64 -#define PCD_EP0MPS_32 DEP0CTL_MPS_32 -#define PCD_EP0MPS_16 DEP0CTL_MPS_16 -#define PCD_EP0MPS_08 DEP0CTL_MPS_8 +#define PCD_EP0MPS_64 EP_MPS_64 +#define PCD_EP0MPS_32 EP_MPS_32 +#define PCD_EP0MPS_16 EP_MPS_16 +#define PCD_EP0MPS_08 EP_MPS_8 /** * @} */ @@ -401,8 +425,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); /* Private macros ------------------------------------------------------------*/ /** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ + * @{ + */ /******************** Bit definition for USB_COUNTn_RX register *************/ #define USB_CNTRX_NBLK_MSK (0x1FU << 10) @@ -412,10 +436,10 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); #define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue)) /* GetENDPOINT */ -#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) +#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U))) /* ENDPOINT transfer */ -#define USB_EP0StartXfer USB_EPStartXfer +#define USB_EP0StartXfer USB_EPStartXfer /** * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) @@ -424,8 +448,7 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wType Endpoint Type. * @retval None */ -#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ - ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) +#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX))) /** * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) @@ -442,18 +465,19 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum, bDir * @retval None */ -#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) do { \ - if ((bDir) == 0U) \ - { \ - /* OUT double buffered endpoint */ \ - PCD_TX_DTOG((USBx), (bEpNum)); \ - } \ - else if ((bDir) == 1U) \ - { \ - /* IN double buffered endpoint */ \ - PCD_RX_DTOG((USBx), (bEpNum)); \ - } \ -} while(0) +#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \ + do { \ + if ((bDir) == 0U) \ + { \ + /* OUT double buffered endpoint */ \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } \ + else if ((bDir) == 1U) \ + { \ + /* IN double buffered endpoint */ \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } \ + } while(0) /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). @@ -462,21 +486,22 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wState new state * @retval None */ -#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) do { \ - uint16_t _wRegVal; \ - \ +#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \ + do { \ + uint16_t _wRegVal; \ + \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \ - /* toggle first bit ? */ \ - if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ - { \ + /* toggle first bit ? */ \ + if ((USB_EPTX_DTOG1 & (wState))!= 0U) \ + { \ _wRegVal ^= USB_EPTX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ - { \ + } \ + /* toggle second bit ? */ \ + if ((USB_EPTX_DTOG2 & (wState))!= 0U) \ + { \ _wRegVal ^= USB_EPTX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_TX_STATUS */ /** @@ -486,19 +511,20 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wState new state * @retval None */ -#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) do { \ +#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \ /* toggle first bit ? */ \ if ((USB_EPRX_DTOG1 & (wState))!= 0U) \ { \ - _wRegVal ^= USB_EPRX_DTOG1; \ + _wRegVal ^= USB_EPRX_DTOG1; \ } \ /* toggle second bit ? */ \ if ((USB_EPRX_DTOG2 & (wState))!= 0U) \ { \ - _wRegVal ^= USB_EPRX_DTOG2; \ + _wRegVal ^= USB_EPRX_DTOG2; \ } \ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \ } while(0) /* PCD_SET_EP_RX_STATUS */ @@ -511,7 +537,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wStatetx new state. * @retval None */ -#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) do { \ +#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \ @@ -564,10 +591,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum Endpoint Number. * @retval TRUE = endpoint in stall condition. */ -#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \ - == USB_EP_TX_STALL) -#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \ - == USB_EP_RX_STALL) +#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) == USB_EP_TX_STALL) +#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) == USB_EP_RX_STALL) /** * @brief set & clear EP_KIND bit. @@ -575,7 +600,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum Endpoint Number. * @retval None */ -#define PCD_SET_EP_KIND(USBx, bEpNum) do { \ +#define PCD_SET_EP_KIND(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ @@ -583,7 +609,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \ } while(0) /* PCD_SET_EP_KIND */ -#define PCD_CLEAR_EP_KIND(USBx, bEpNum) do { \ +#define PCD_CLEAR_EP_KIND(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \ @@ -615,7 +642,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum Endpoint Number. * @retval None */ -#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) do { \ +#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \ @@ -623,7 +651,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \ } while(0) /* PCD_CLEAR_RX_EP_CTR */ -#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) do { \ +#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \ @@ -637,7 +666,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum Endpoint Number. * @retval None */ -#define PCD_RX_DTOG(USBx, bEpNum) do { \ +#define PCD_RX_DTOG(USBx, bEpNum) \ + do { \ uint16_t _wEPVal; \ \ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ @@ -645,7 +675,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \ } while(0) /* PCD_RX_DTOG */ -#define PCD_TX_DTOG(USBx, bEpNum) do { \ +#define PCD_TX_DTOG(USBx, bEpNum) \ + do { \ uint16_t _wEPVal; \ \ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \ @@ -658,7 +689,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bEpNum Endpoint Number. * @retval None */ -#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) do { \ +#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ @@ -669,7 +701,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); } \ } while(0) /* PCD_CLEAR_RX_DTOG */ -#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) do { \ +#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \ @@ -687,7 +720,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param bAddr Address. * @retval None */ -#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) do { \ +#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \ + do { \ uint16_t _wRegVal; \ \ _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \ @@ -713,23 +747,25 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wAddr address to be set (must be word aligned). * @retval None */ -#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) do { \ - __IO uint16_t *_wRegVal; \ - uint32_t _wRegBase = (uint32_t)USBx; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ - *_wRegVal = ((wAddr) >> 1) << 1; \ -} while(0) /* PCD_SET_EP_TX_ADDRESS */ +#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_TX_ADDRESS */ -#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) do { \ - __IO uint16_t *_wRegVal; \ - uint32_t _wRegBase = (uint32_t)USBx; \ - \ - _wRegBase += (uint32_t)(USBx)->BTABLE; \ - _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ - *_wRegVal = ((wAddr) >> 1) << 1; \ -} while(0) /* PCD_SET_EP_RX_ADDRESS */ +#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \ + do { \ + __IO uint16_t *_wRegVal; \ + uint32_t _wRegBase = (uint32_t)USBx; \ + \ + _wRegBase += (uint32_t)(USBx)->BTABLE; \ + _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \ + *_wRegVal = ((wAddr) >> 1) << 1; \ + } while(0) /* PCD_SET_EP_RX_ADDRESS */ /** * @brief Gets address of the tx/rx buffer. @@ -747,7 +783,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wNBlocks no. of Blocks. * @retval None */ -#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) do { \ +#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \ + do { \ (wNBlocks) = (wCount) >> 5; \ if (((wCount) & 0x1fU) == 0U) \ { \ @@ -756,7 +793,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \ } while(0) /* PCD_CALC_BLK32 */ -#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) do { \ +#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \ + do { \ (wNBlocks) = (wCount) >> 1; \ if (((wCount) & 0x1U) != 0U) \ { \ @@ -765,7 +803,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); *(pdwReg) = (uint16_t)((wNBlocks) << 10); \ } while(0) /* PCD_CALC_BLK2 */ -#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) do { \ +#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \ + do { \ uint32_t wNBlocks; \ if ((wCount) == 0U) \ { \ @@ -782,10 +821,11 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); } \ } while(0) /* PCD_SET_EP_CNT_RX_REG */ -#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) do { \ - uint32_t _wRegBase = (uint32_t)(USBx); \ - __IO uint16_t *pdwReg; \ - \ +#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \ + do { \ + uint32_t _wRegBase = (uint32_t)(USBx); \ + __IO uint16_t *pdwReg; \ + \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \ @@ -798,23 +838,25 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wCount Counter value. * @retval None */ -#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) do { \ +#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \ + do { \ uint32_t _wRegBase = (uint32_t)(USBx); \ __IO uint16_t *_wRegVal; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \ *_wRegVal = (uint16_t)(wCount); \ -} while(0) + } while(0) -#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) do { \ +#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \ + do { \ uint32_t _wRegBase = (uint32_t)(USBx); \ __IO uint16_t *_wRegVal; \ \ _wRegBase += (uint32_t)(USBx)->BTABLE; \ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \ PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \ -} while(0) + } while(0) /** * @brief gets counter of the tx buffer. @@ -832,10 +874,13 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wBuf0Addr buffer 0 address. * @retval Counter value */ -#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) do { \ +#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \ + do { \ PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \ } while(0) /* PCD_SET_EP_DBUF0_ADDR */ -#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) do { \ + +#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \ + do { \ PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \ } while(0) /* PCD_SET_EP_DBUF1_ADDR */ @@ -847,7 +892,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wBuf1Addr = buffer 1 address. * @retval None */ -#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) do { \ +#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \ + do { \ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \ } while(0) /* PCD_SET_EP_DBUF_ADDR */ @@ -870,7 +916,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); * @param wCount: Counter value * @retval None */ -#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) do { \ +#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ if ((bDir) == 0U) \ /* OUT endpoint */ \ { \ @@ -886,7 +933,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); } \ } while(0) /* SetEPDblBuf0Count*/ -#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) do { \ +#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ uint32_t _wBase = (uint32_t)(USBx); \ __IO uint16_t *_wEPRegVal; \ \ @@ -907,10 +955,11 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); } \ } while(0) /* SetEPDblBuf1Count */ -#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) do { \ +#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \ + do { \ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ - } while(0) /* PCD_SET_EP_DBUF_CNT */ + } while(0) /* PCD_SET_EP_DBUF_CNT */ /** * @brief Gets buffer 0/1 rx/tx counter for double buffering. diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h index 61e4c04199..2f75a7e9f4 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pcd_ex.h @@ -49,10 +49,8 @@ extern "C" { -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, - uint16_t ep_addr, - uint16_t ep_kind, - uint32_t pmaadress); +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress); HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h index df07fd2fcd..9ed9c4fe09 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr.h @@ -105,7 +105,9 @@ typedef struct */ #define PWR_LOWPOWERMODE_STOP0 (0x00000000u) /*!< Stop 0: stop mode with main regulator */ #define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: stop mode with low power regulator */ +#if defined(PWR_SUPPORT_STOP2) #define PWR_LOWPOWERMODE_STOP2 (PWR_CR1_LPMS_1) /*!< Stop 2: stop mode with low power regulator and VDD12I interruptible digital core domain supply OFF (less peripherals activated than low power mode stop 1 to reduce power consumption)*/ +#endif #define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */ #define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */ /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h index 612cfa28cb..0adc7c0189 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_pwr_ex.h @@ -366,7 +366,9 @@ typedef struct #endif #define PWR_FLAG_PVDO (PWR_FLAG_REG_SR2 | PWR_SR2_PVDO_Pos) /*!< Power Voltage Detector output flag */ +#if defined(PWR_CR2_PVME1) #define PWR_FLAG_PVMO1 (PWR_FLAG_REG_SR2 | PWR_SR2_PVMO1_Pos) /*!< Power Voltage Monitoring 1 output flag */ +#endif #define PWR_FLAG_PVMO3 (PWR_FLAG_REG_SR2 | PWR_SR2_PVMO3_Pos) /*!< Power Voltage Monitoring 3 output flag */ /*------------------------------EXTSCR---------------------------*/ @@ -938,7 +940,9 @@ HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry); void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry); +#if defined(PWR_SUPPORT_STOP2) void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry); +#endif void HAL_PWREx_EnterSHUTDOWNMode(void); void HAL_PWREx_PVD_PVM_IRQHandler(void); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h index bb0d762e78..110a33d8b1 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc.h @@ -59,22 +59,27 @@ extern "C" { * @{ */ +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI1) == RCC_OSCILLATORTYPE_LSI1) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI2) == RCC_OSCILLATORTYPE_LSI2) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#else #define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ - (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI1) == RCC_OSCILLATORTYPE_LSI1) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI2) == RCC_OSCILLATORTYPE_LSI2) || \ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) +#endif -#if defined(RCC_CR_HSEBYP) -#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ - ((__HSE__) == RCC_HSE_BYPASS)) -#else #define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON)) -#endif #define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ ((__LSE__) == RCC_LSE_BYPASS)) @@ -93,9 +98,9 @@ extern "C" { #define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)255U) - +#if defined(RCC_HSI48_SUPPORT) #define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) - +#endif #define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ ((__PLL__) == RCC_PLL_ON)) @@ -177,16 +182,28 @@ extern "C" { ((__MCOX__) == RCC_MCO2)) #endif +#if defined(RCC_HSI48_SUPPORT) #define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSI1) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSI2) || \ - ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI1) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI2) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI1) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI2) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif #define IS_RCC_MCO2SOURCE(__SOURCE__) IS_RCC_MCO1SOURCE((__SOURCE__)) #define IS_RCC_MCO3SOURCE(__SOURCE__) IS_RCC_MCO1SOURCE((__SOURCE__)) @@ -279,8 +296,10 @@ typedef struct uint32_t MSIClockRange; /*!< The MSI frequency range. This parameter can be a value of @ref RCC_MSI_Clock_Range */ +#if defined(RCC_HSI48_SUPPORT) uint32_t HSI48State; /*!< The new state of the HSI48 . This parameter can be a value of @ref RCC_HSI48_Config */ +#endif RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ @@ -342,7 +361,9 @@ typedef struct #define RCC_OSCILLATORTYPE_LSI1 0x00000008U /*!< LSI1 to configure */ #define RCC_OSCILLATORTYPE_LSI2 0x00000010U /*!< LSI2 to configure */ #define RCC_OSCILLATORTYPE_MSI 0x00000020U /*!< MSI to configure */ +#if defined(RCC_HSI48_SUPPORT) #define RCC_OSCILLATORTYPE_HSI48 0x00000040U /*!< HSI48 to configure */ +#endif /** * @} */ @@ -352,9 +373,6 @@ typedef struct */ #define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ #define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ -#if defined(RCC_CR_HSEBYP) -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */ -#endif /** * @} */ @@ -400,7 +418,7 @@ typedef struct * @} */ - +#if defined(RCC_HSI48_SUPPORT) /** @defgroup RCC_HSI48_Config HSI48 Config * @{ */ @@ -409,7 +427,7 @@ typedef struct /** * @} */ - +#endif /** @defgroup RCC_PLL_Config PLL Config * @{ @@ -523,9 +541,6 @@ typedef struct #define RCC_PLL_SAI1CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI1CLK selection from main PLL */ #endif #define RCC_PLL_ADCCLK RCC_PLLCFGR_PLLPEN /*!< PLLADCCLK selection from main PLL */ -#if defined(SPI_I2S_SUPPORT) -#define RCC_PLL_I2SCLK RCC_PLLCFGR_PLLPEN /*!< PLLI2SCLK selection from main PLL */ -#endif /** * @} */ @@ -666,7 +681,9 @@ typedef struct #define RCC_MCO1SOURCE_LSI1 LL_RCC_MCO1SOURCE_LSI1 /*!< LSI1 selection as MCO1 source */ #define RCC_MCO1SOURCE_LSI2 LL_RCC_MCO1SOURCE_LSI2 /*!< LSI2 selection as MCO1 source */ #define RCC_MCO1SOURCE_LSE LL_RCC_MCO1SOURCE_LSE /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) #define RCC_MCO1SOURCE_HSI48 LL_RCC_MCO1SOURCE_HSI48 /*!< HSI48 selection as MCO1 source */ +#endif #define RCC_MCO1SOURCE_HSE_BEFORE_STAB LL_RCC_MCO1SOURCE_HSE_BEFORE_STAB /*!< HSE before stabilization selection as MCO1 source */ /** @@ -726,7 +743,9 @@ typedef struct #endif #define RCC_IT_HSECSS LL_RCC_CIFR_CSSF /*!< HSE Clock Security System Interrupt flag */ #define RCC_IT_LSECSS LL_RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) #define RCC_IT_HSI48RDY LL_RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /** * @} */ @@ -767,8 +786,9 @@ typedef struct #define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ /* Flags in the CRRCR register */ +#if defined(RCC_HSI48_SUPPORT) #define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ - +#endif /** * @} */ @@ -850,8 +870,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH) - +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -863,9 +884,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_GPIOH) - +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_ADC) - +#endif #if defined(AES1) #define __HAL_RCC_AES1_CLK_DISABLE() LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -976,6 +997,9 @@ typedef struct * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1) @@ -985,6 +1009,9 @@ typedef struct #define __HAL_RCC_SAI1_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_USART1) @@ -1046,7 +1073,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_ENABLED() LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -1059,7 +1088,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOE)) #define __HAL_RCC_GPIOH_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_GPIOH)) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_ADC)) +#endif #if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_DISABLED() !(LL_AHB2_GRP1_IsEnabledClock(LL_AHB2_GRP1_PERIPH_AES1)) #endif @@ -1172,6 +1203,9 @@ typedef struct * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1) @@ -1182,6 +1216,9 @@ typedef struct #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_ADC)) +#endif #define __HAL_RCC_TIM1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_TIM1)) #define __HAL_RCC_SPI1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_SPI1)) #define __HAL_RCC_USART1_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_USART1)) @@ -1245,7 +1282,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_CLK_ENABLE() LL_C2_AHB2_GRP1_EnableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) #endif @@ -1258,7 +1297,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_CLK_DISABLE() LL_C2_AHB2_GRP1_DisableClock(LL_C2_AHB2_GRP1_PERIPH_AES1) #endif @@ -1363,6 +1404,9 @@ typedef struct * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_C2TIM1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_USART1) @@ -1372,6 +1416,9 @@ typedef struct #define __HAL_RCC_C2SAI1_CLK_ENABLE() LL_C2_APB2_GRP1_EnableClock(LL_C2_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_C2TIM1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_DISABLE() LL_C2_APB2_GRP1_DisableClock(LL_C2_APB2_GRP1_PERIPH_USART1) @@ -1394,11 +1441,14 @@ typedef struct */ #define __HAL_RCC_C2BLE_CLK_ENABLE() LL_C2_APB3_GRP1_EnableClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_CLK_ENABLE() LL_C2_APB3_GRP1_EnableClock(LL_C2_APB3_GRP1_PERIPH_802) +#endif #define __HAL_RCC_C2BLE_CLK_DISABLE() LL_C2_APB3_GRP1_DisableClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_CLK_DISABLE() LL_C2_APB3_GRP1_DisableClock(LL_C2_APB3_GRP1_PERIPH_802) - +#endif /** * @} @@ -1454,7 +1504,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_ENABLED() LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1) #endif @@ -1467,7 +1519,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOE)) #define __HAL_RCC_C2GPIOH_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_GPIOH)) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_ADC)) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_DISABLED() !(LL_C2_AHB2_GRP1_IsEnabledClock(LL_C2_AHB2_GRP1_PERIPH_AES1)) #endif @@ -1572,6 +1626,9 @@ typedef struct * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1) @@ -1581,6 +1638,9 @@ typedef struct #define __HAL_RCC_C2SAI1_IS_CLK_ENABLED() LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_ADC)) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_TIM1)) #define __HAL_RCC_C2SPI1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_SPI1)) #define __HAL_RCC_C2USART1_IS_CLK_DISABLED() !( LL_C2_APB2_GRP1_IsEnabledClock(LL_C2_APB2_GRP1_PERIPH_USART1)) @@ -1604,10 +1664,14 @@ typedef struct */ #define __HAL_RCC_C2BLE_IS_CLK_ENABLED() LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_IS_CLK_ENABLED() LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_802) +#endif #define __HAL_RCC_C2BLE_IS_CLK_DISABLED() !(LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_BLE)) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_IS_CLK_DISABLED() !(LL_C2_APB3_GRP1_IsEnabledClock(LL_C2_APB3_GRP1_PERIPH_802)) +#endif /** * @} @@ -1659,7 +1723,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_FORCE_RESET() LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -1673,7 +1739,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_RELEASE_RESET() LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -1786,6 +1854,9 @@ typedef struct * @{ */ #define __HAL_RCC_APB2_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1) @@ -1796,6 +1867,9 @@ typedef struct #endif #define __HAL_RCC_APB2_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1) @@ -1895,7 +1969,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_CLK_SLEEP_ENABLE() LL_AHB2_GRP1_EnableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -1908,7 +1984,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_AES1_CLK_SLEEP_DISABLE() LL_AHB2_GRP1_DisableClockSleep(LL_AHB2_GRP1_PERIPH_AES1) #endif @@ -1921,7 +1999,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_CLK_SLEEP_ENABLE() LL_C2_AHB2_GRP1_EnableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) #endif @@ -1934,7 +2014,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOE) #define __HAL_RCC_C2GPIOH_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_GPIOH) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_ADC) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_CLK_SLEEP_DISABLE() LL_C2_AHB2_GRP1_DisableClockSleep(LL_C2_AHB2_GRP1_PERIPH_AES1) #endif @@ -2103,6 +2185,9 @@ typedef struct * @note By default, all peripheral clocks are enabled during SLEEP mode. * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_USART1) @@ -2112,6 +2197,9 @@ typedef struct #define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() LL_APB2_GRP1_EnableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_USART1) @@ -2121,6 +2209,9 @@ typedef struct #define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() LL_APB2_GRP1_DisableClockSleep(LL_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_C2TIM1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) @@ -2130,6 +2221,9 @@ typedef struct #define __HAL_RCC_C2SAI1_CLK_SLEEP_ENABLE() LL_C2_APB2_GRP1_EnableClockSleep(LL_C2_APB2_GRP1_PERIPH_SAI1) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_ADC) +#endif #define __HAL_RCC_C2TIM1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_TIM1) #define __HAL_RCC_C2SPI1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_SPI1) #define __HAL_RCC_C2USART1_CLK_SLEEP_DISABLE() LL_C2_APB2_GRP1_DisableClockSleep(LL_C2_APB2_GRP1_PERIPH_USART1) @@ -2213,7 +2307,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != RESET) #define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != RESET) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != RESET) +#endif #if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) != RESET) #endif @@ -2226,7 +2322,9 @@ typedef struct #endif #define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == RESET) #define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == RESET) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == RESET) +#endif #if defined(AES1) #define __HAL_RCC_AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AES1SMEN) == RESET) #endif @@ -2239,7 +2337,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) != RESET) #define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) != RESET) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) != RESET) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) != RESET) #endif @@ -2252,7 +2352,9 @@ typedef struct #endif #define __HAL_RCC_C2GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOESMEN) == RESET) #define __HAL_RCC_C2GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_GPIOHSMEN) == RESET) +#if defined(ADC_SUPPORT_5_MSPS) #define __HAL_RCC_C2ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_ADCSMEN) == RESET) +#endif #if defined(AES1) #define __HAL_RCC_C2AES1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2AHB2SMENR, RCC_C2AHB2SMENR_AES1SMEN) == RESET) #endif @@ -2419,6 +2521,9 @@ typedef struct * @note By default, all peripheral clocks are enabled during SLEEP mode. * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_ADCSMEN) != RESET) +#endif #define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != RESET) #define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != RESET) #define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != RESET) @@ -2428,6 +2533,9 @@ typedef struct #define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != RESET) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_ADCSMEN) == RESET) +#endif #define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == RESET) #define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == RESET) #define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == RESET) @@ -2437,6 +2545,9 @@ typedef struct #define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == RESET) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_ADCSMEN) != RESET) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) != RESET) #define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) != RESET) #define __HAL_RCC_C2USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) != RESET) @@ -2446,6 +2557,9 @@ typedef struct #define __HAL_RCC_C2SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SAI1SMEN) != RESET) #endif +#if defined(ADC_SUPPORT_2_5_MSPS) +#define __HAL_RCC_C2ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_ADCSMEN) == RESET) +#endif #define __HAL_RCC_C2TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_TIM1SMEN) == RESET) #define __HAL_RCC_C2SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_SPI1SMEN) == RESET) #define __HAL_RCC_C2USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB2SMENR, RCC_C2APB2SMENR_USART1SMEN) == RESET) @@ -2467,10 +2581,14 @@ typedef struct * @{ */ #define __HAL_RCC_C2BLE_CLK_SLEEP_ENABLE() LL_C2_APB3_GRP1_EnableClockSleep(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_CLK_SLEEP_ENABLE() LL_C2_APB3_GRP1_EnableClockSleep(LL_C2_APB3_GRP1_PERIPH_802) +#endif #define __HAL_RCC_C2BLE_CLK_SLEEP_DISABLE() LL_C2_APB3_GRP1_DisableClockSleep(LL_C2_APB3_GRP1_PERIPH_BLE) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_CLK_SLEEP_DISABLE() LL_C2_APB3_GRP1_DisableClockSleep(LL_C2_APB3_GRP1_PERIPH_802) +#endif /** * @} */ @@ -2484,10 +2602,14 @@ typedef struct * @{ */ #define __HAL_RCC_C2BLE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_BLESMEN) != RESET) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_802SMEN) != RESET) +#endif #define __HAL_RCC_C2BLE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_BLESMEN) == RESET) +#if defined(RCC_802_SUPPORT) #define __HAL_RCC_C2802_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->C2APB3SMENR, RCC_C2APB3SMENR_802SMEN) == RESET) +#endif /** * @} */ @@ -2689,10 +2811,7 @@ typedef struct /** * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * @note After enabling the HSE (RCC_HSE_ON), the application * software should wait on HSERDY flag to be set indicating that HSE clock * is stable and can be used to clock the PLL and/or system clock. * @note HSE state can not be changed if it is used directly or through the @@ -2707,41 +2826,20 @@ typedef struct * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after * 6 HSE oscillator clock cycles. * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. - * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. (*) * @note (*) Value not defined for all devices * @retval None */ -#if defined(RCC_CR_HSEBYP) #define __HAL_RCC_HSE_CONFIG(__STATE__) \ do { \ if((__STATE__) == RCC_HSE_ON) \ { \ LL_RCC_HSE_Enable(); \ } \ - else if((__STATE__) == RCC_HSE_BYPASS) \ - { \ - LL_RCC_HSE_EnableBypass(); \ - LL_RCC_HSE_Enable(); \ - } \ else \ { \ LL_RCC_HSE_Disable(); \ - LL_RCC_HSE_DisableBypass(); \ } \ } while(0U) -#else -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do { \ - if((__STATE__) == RCC_HSE_ON) \ - { \ - LL_RCC_HSE_Enable(); \ - } \ - else \ - { \ - LL_RCC_HSE_Disable(); \ - } \ - } while(0U) -#endif /** @brief Macros to enable or disable the HSE Prescaler * @note HSE div2 could be used as Sysclk or PLL entry in Range2 @@ -2789,6 +2887,7 @@ typedef struct } while(0U) +#if defined(RCC_HSI48_SUPPORT) /** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. * @note After enabling the HSI48, the application software should wait on HSI48RDY @@ -2798,6 +2897,7 @@ typedef struct */ #define __HAL_RCC_HSI48_ENABLE() LL_RCC_HSI48_Enable() #define __HAL_RCC_HSI48_DISABLE() LL_RCC_HSI48_Disable() +#endif /** @brief Macros to configure HSE sense amplifier threshold. * @note to configure HSE sense amplifier, first disable HSE @@ -2988,7 +3088,6 @@ typedef struct * @arg @ref RCC_PLL_USBCLK This Clock is used to generate the clock for the USB FS (48 MHz) * @arg @ref RCC_PLL_RNGCLK This clock is used to generate the clock for RNG * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 64MHz) - * @arg @ref RCC_PLL_I2SCLK This Clock is used to generate the clock for the I2S * @retval None */ #define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) @@ -3069,8 +3168,8 @@ typedef struct * @arg @ref RCC_MCO1SOURCE_LSI1 LSI1 clock selected as MCO source * @arg @ref RCC_MCO1SOURCE_LSI2 LSI2 clock selected as MCO source * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source - + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source (*) + * * @param __MCODIV__ specifies the MCO clock prescaler. * This parameter can be one of the following values: * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 @@ -3078,6 +3177,8 @@ typedef struct * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * + * @note (*) Value not defined for all devices */ #define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) LL_RCC_ConfigMCO((__MCOCLKSOURCE__), (__MCODIV__)) @@ -3098,8 +3199,11 @@ typedef struct * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt enable * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable - * @arg @ref RCC_IT_HSI48RDY PLLHSI48 ready interrupt enable + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt enable (*) * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt enable + * + * @note (*) Value not defined for all devices + * * @retval None */ #define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) @@ -3115,8 +3219,11 @@ typedef struct * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt enable * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt enable * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt enable - * @arg @ref RCC_IT_HSI48RDY PLLHSI48 ready interrupt enable + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt enable (*) * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt enable + * + * @note (*) Value not defined for all devices + * * @retval None */ #define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) @@ -3134,8 +3241,10 @@ typedef struct * @arg @ref RCC_IT_PLLRDY PLLSAI1 ready interrupt clear * @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt clear * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt clear - * @arg @ref RCC_IT_HSI48RDY PLLHSI48 ready interrupt clear + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt clear (*) * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt clear + * + * @note (*) Value not defined for all devices */ #define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) @@ -3151,8 +3260,11 @@ typedef struct * @arg @ref RCC_IT_PLLRDY PLLSAI1 ready interrupt flag * @arg @ref RCC_IT_HSECSS HSE Clock security system interrupt flag * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt flag - * @arg @ref RCC_IT_HSI48RDY PLLHSI48 ready interrupt flag + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt flag (*) * @arg @ref RCC_IT_LSI2RDY LSI2 ready interrupt flag + * + * @note (*) Value not defined for all devices + * * @retval The new state of __INTERRUPT__ (TRUE or FALSE). */ #define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) @@ -3167,23 +3279,26 @@ typedef struct /** @brief Check whether the selected RCC flag is set or not. * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: - * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready - * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready - * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready - * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready - * @arg @ref RCC_FLAG_PLLRDY PLLSAI1 clock ready - * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 - * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready - * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection - * @arg @ref RCC_FLAG_LSI1RDY LSI1 oscillator clock ready - * @arg @ref RCC_FLAG_LSI2RDY LSI2 oscillator clock ready - * @arg @ref RCC_FLAG_BORRST BOR reset - * @arg @ref RCC_FLAG_OBLRST OBLRST reset - * @arg @ref RCC_FLAG_PINRST Pin reset - * @arg @ref RCC_FLAG_SFTRST Software reset - * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset - * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset - * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_PLLRDY PLLSAI1 clock ready + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 (*) + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSI1RDY LSI1 oscillator clock ready + * @arg @ref RCC_FLAG_LSI2RDY LSI2 oscillator clock ready + * @arg @ref RCC_FLAG_BORRST BOR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * + * @note (*) Value not defined for all devices + * * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h index 920bf86975..ce3db4cdcf 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rcc_ex.h @@ -86,21 +86,17 @@ extern "C" { (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)|| \ (((__SELECTION__) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS)) -#elif defined(LPUART1) && defined(USB) && defined(RCC_SMPS_SUPPORT) && defined(SPI_I2S_SUPPORT) +#elif defined(LPUART1) #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ - (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)|| \ - (((__SELECTION__) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)) + (((__SELECTION__) & RCC_PERIPHCLK_RFWAKEUP) == RCC_PERIPHCLK_RFWAKEUP)) #else #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ @@ -159,6 +155,7 @@ extern "C" { ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) +#if defined(RCC_HSI48_SUPPORT) #define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ @@ -166,6 +163,14 @@ extern "C" { ((__SOURCE__) == RCC_RNGCLKSOURCE_CLK48) || \ ((__SOURCE__) == RCC_RNGCLKSOURCE_LSI) || \ ((__SOURCE__) == RCC_RNGCLKSOURCE_LSE)) +#else +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_CLK48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_LSE)) +#endif #if defined(USB) #if defined(SAI1) @@ -188,6 +193,12 @@ extern "C" { ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#elif defined(STM32WB15xx) +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) #else #define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ @@ -195,18 +206,10 @@ extern "C" { ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) #endif -#if defined(STM32WB55xx) || defined (STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) -#define IS_RCC_RFWKPCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_RFWKPCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_RFWKPCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RFWKPCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RFWKPCLKSOURCE_HSE_DIV1024)) -#else #define IS_RCC_RFWKPCLKSOURCE(__SOURCE__) \ (((__SOURCE__) == RCC_RFWKPCLKSOURCE_NONE) || \ ((__SOURCE__) == RCC_RFWKPCLKSOURCE_LSE) || \ ((__SOURCE__) == RCC_RFWKPCLKSOURCE_HSE_DIV1024)) -#endif #if defined(RCC_SMPS_SUPPORT) #define IS_RCC_SMPSCLKDIV(__DIV__) \ @@ -221,13 +224,6 @@ extern "C" { ((__SOURCE__) == RCC_SMPSCLKSOURCE_HSE)) #endif -#if defined(SPI_I2S_SUPPORT) -#define IS_RCC_I2SCLKSOURCE(__SOURCE__) \ - (((__SOURCE__) == RCC_I2SCLKSOURCE_NONE) || \ - ((__SOURCE__) == RCC_I2SCLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_I2SCLKSOURCE_PLL) || \ - ((__SOURCE__) == RCC_I2SCLKSOURCE_PIN)) -#endif #if defined(SAI1) #define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) @@ -364,10 +360,6 @@ typedef struct This parameter can be a value of @ref RCCEx_SMPS_Clock_Divider */ #endif -#if defined(SPI_I2S_SUPPORT) - uint32_t I2sClockSelection; /*!< Specifies I2s clock source. - This parameter can be a value of @ref RCCEx_I2s_Clock_Source */ -#endif } RCC_PeriphCLKInitTypeDef; @@ -479,9 +471,6 @@ typedef struct #if defined(RCC_SMPS_SUPPORT) #define RCC_PERIPHCLK_SMPS 0x00002000U /*!< SMPS Peripheral Clock Selection */ #endif -#if defined(SPI_I2S_SUPPORT) -#define RCC_PERIPHCLK_I2S 0x00004000U /*!< I2S Peripheral Clock Selection */ -#endif /** * @} */ @@ -602,6 +591,8 @@ typedef struct #define RCC_ADCCLKSOURCE_NONE LL_RCC_ADC_CLKSOURCE_NONE /*!< None clock selected as ADC clock */ #if defined(STM32WB55xx) || defined (STM32WB5Mxx) || defined(STM32WB35xx) #define RCC_ADCCLKSOURCE_PLLSAI1 LL_RCC_ADC_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 "R" clock selected as ADC clock */ +#elif defined (STM32WB15xx) +#define RCC_ADCCLKSOURCE_HSI LL_RCC_ADC_CLKSOURCE_HSI /*!< HSI clock selected as ADC clock */ #endif #define RCC_ADCCLKSOURCE_PLL LL_RCC_ADC_CLKSOURCE_PLL /*!< PLL "P" clock selected as ADC clock */ #define RCC_ADCCLKSOURCE_SYSCLK LL_RCC_ADC_CLKSOURCE_SYSCLK /*!< SYSCLK clock selected as ADC clock */ @@ -627,9 +618,6 @@ typedef struct #define RCC_RFWKPCLKSOURCE_NONE LL_RCC_RFWKP_CLKSOURCE_NONE /*!< None clock selected as RF system wakeup clock */ #define RCC_RFWKPCLKSOURCE_LSE LL_RCC_RFWKP_CLKSOURCE_LSE /*!< LSE clock selected as RF system wakeup clock */ -#if defined(STM32WB55xx) || defined (STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) -#define RCC_RFWKPCLKSOURCE_LSI LL_RCC_RFWKP_CLKSOURCE_LSI /*!< LSI clock selected as RF system wakeup clock */ -#endif #define RCC_RFWKPCLKSOURCE_HSE_DIV1024 LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024 /*!< HSE clock divided by 1024 selected as RF system wakeup clock */ /** @@ -670,18 +658,6 @@ typedef struct */ #endif -#if defined(SPI_I2S_SUPPORT) -/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_NONE LL_RCC_I2S_CLKSOURCE_NONE /*!< No clock selected as I2S clock */ -#define RCC_I2SCLKSOURCE_PLL LL_RCC_I2S_CLKSOURCE_PLL /*!< PLL "Q" clock selected as I2S clock source */ -#define RCC_I2SCLKSOURCE_HSI LL_RCC_I2S_CLKSOURCE_HSI /*!< HSI clock selected as I2S clock */ -#define RCC_I2SCLKSOURCE_PIN LL_RCC_I2S_CLKSOURCE_PIN /*!< External clock selected as I2S clock */ -/** - * @} - */ -#endif /** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line * @{ @@ -1220,9 +1196,7 @@ typedef struct * This parameter can be one of the following values: * @arg @ref RCC_RFWKPCLKSOURCE_NONE No clock selected as RFWKP clock * @arg @ref RCC_RFWKPCLKSOURCE_LSE LSE Clock selected as RFWKP clock - * @arg @ref RCC_RFWKPCLKSOURCE_LSI LSI Clock selected as RFWKP clock (*) * @arg @ref RCC_RFWKPCLKSOURCE_HSE_DIV1024 HSE div1024 Clock selected as RFWKP clock - * @note (*) Value not defined for all devices * @retval None */ #define __HAL_RCC_RFWAKEUP_CONFIG(__RFWKP_CLKSOURCE__) LL_RCC_SetRFWKPClockSource(__RFWKP_CLKSOURCE__) @@ -1231,9 +1205,7 @@ typedef struct * This parameter can be one of the following values: * @arg @ref RCC_RFWKPCLKSOURCE_NONE No clock selected as RFWKP clock * @arg @ref RCC_RFWKPCLKSOURCE_LSE LSE Clock selected as RFWKP clock - * @arg @ref RCC_RFWKPCLKSOURCE_LSI LSI Clock selected as RFWKP clock (*) * @arg @ref RCC_RFWKPCLKSOURCE_HSE_DIV1024 HSE div1024 Clock selected as RFWKP clock - * @note (*) Value not defined for all devices */ #define __HAL_RCC_GET_RFWAKEUP_SOURCE() LL_RCC_GetRFWKPClockSource() @@ -1297,27 +1269,6 @@ typedef struct * @{ */ -#if defined(SPI_I2S_SUPPORT) -/** @brief Macro to configure the I2S clock (I2SCLK). - * @param __I2S_CLKSOURCE__ specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2SCLKSOURCE_NONE No clock selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_PLL PLL "Q" selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_HSI HSI selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_PIN External clock selected as I2S clock - * @retval None - */ -#define __HAL_RCC_I2S_CONFIG(__I2S_CLKSOURCE__) LL_RCC_SetI2SClockSource(__I2S_CLKSOURCE__) - -/** @brief Macro to get the I2S clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2SCLKSOURCE_NONE No clock selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_PLL PLL "Q" selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_HSI HSI selected as I2S clock - * @arg @ref RCC_I2SCLKSOURCE_PIN External clock selected as I2S clock - */ -#define __HAL_RCC_GET_I2S_SOURCE() LL_RCC_GetI2SClockSource(LL_RCC_I2S_CLKSOURCE) -#endif #if defined(SAI1) /** @brief Enable PLLSAI1RDY interrupt. diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h index 67a9fdb48c..713c4b45da 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_rtc.h @@ -81,6 +81,7 @@ typedef struct This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter is dedicated to the PC13 configuration. This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ }RTC_InitTypeDef; @@ -264,8 +265,9 @@ typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef * hrtc); /*!< pointer to * @{ */ #define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000U) +#if defined(RTC_OR_ALARMOUTTYPE) #define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)RTC_OR_ALARMOUTTYPE) - +#endif /** * @} */ @@ -868,8 +870,12 @@ HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); #define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ ((POL) == RTC_OUTPUT_POLARITY_LOW)) +#if defined(RTC_OUTPUT_TYPE_PUSHPULL) #define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) +#else +#define IS_RTC_OUTPUT_TYPE(TYPE) ((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) +#endif #define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ ((REMAP) == RTC_OUTPUT_REMAP_POS1)) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smartcard.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smartcard.h index bd4c0c0c07..be98e2c4dd 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smartcard.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smartcard.h @@ -159,7 +159,7 @@ typedef struct * 11 : Error * b5 Peripheral initialization status * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called) + * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called) * b4-b3 (not used) * xx : Should be set to 00 * b2 Intrinsic process state @@ -176,7 +176,7 @@ typedef struct * xx : Should be set to 00 * b5 Peripheral initialization status * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) * b4-b2 (not used) * xxx : Should be set to 000 * b1 Rx state diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smbus.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smbus.h index 57ef924cd8..f52213909b 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smbus.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_smbus.h @@ -65,7 +65,7 @@ typedef struct uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address. */ - uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected This parameter can be a value of @ref SMBUS_own_address2_masks. */ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h index e7fd6c9c70..2cacf87e01 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim.h @@ -400,35 +400,35 @@ typedef struct */ typedef enum { - HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ - ,HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ - ,HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ - ,HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ - ,HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ - ,HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ - ,HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ - ,HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ - ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ - ,HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ - ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ - ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ - ,HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ - ,HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ - ,HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ - ,HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ - ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ - ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ - ,HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ - ,HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ - ,HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ - ,HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ - ,HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ } HAL_TIM_CallbackIDTypeDef; /** @@ -924,7 +924,7 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to * @{ */ #define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ -#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ /** * @} @@ -1073,24 +1073,24 @@ typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to /** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length * @{ */ -#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ -#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ /** * @} */ @@ -2019,6 +2019,8 @@ mode. ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + #define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) #define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) @@ -2062,7 +2064,7 @@ mode. ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ (__HANDLE__)->ChannelState[5]) - + #define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ @@ -2085,7 +2087,7 @@ mode. ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ (__HANDLE__)->ChannelNState[3]) - + #define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ @@ -2270,9 +2272,15 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveC HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength, + uint32_t DataLength); HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h index 7b31bb275b..a0a9e6f8d9 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tim_ex.h @@ -206,46 +206,53 @@ TIMEx_BreakInputConfigTypeDef; * @{ */ #if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) +#define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ + ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFE3FECU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFE3FF0U) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))) +#elif defined(STM32WB10xx) #define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ - ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFF3FECU) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFF3FF0U) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))) + ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFFFFFDU) == 0x00000000U)))) +#elif defined(STM32WB15xx) +#define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ + ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFF3FECU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFF3FF0U) == 0x00000000U)))) #else #define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \ - ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFFFFF0U) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ - || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))) + ((((__INSTANCE__) == TIM1) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM2) && ((((__REMAP__) & 0xFFFFFFF0U) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM16) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))) \ + || (((__INSTANCE__) == TIM17) && ((((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U)))) #endif -#define IS_TIM_BREAKINPUT(__BREAKINPUT__) \ - (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ - ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) \ + (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) #if defined(COMP1) #if defined(COMP2) -#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ - (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ + (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) #else -#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ - (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ - ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1)) +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ + (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)) #endif #else #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) \ - (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)) + (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN)) #endif -#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) \ - (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ - ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) \ + (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) -#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) \ - (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ - ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) \ + (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h index 1629e91f8a..ccf414dcd1 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_tsc.h @@ -628,6 +628,10 @@ typedef void (*pTSC_CallbackTypeDef)(TSC_HandleTypeDef *htsc); /*!< pointer to ((__VALUE__) == TSC_PG_PRESC_DIV64) || \ ((__VALUE__) == TSC_PG_PRESC_DIV128)) +#define IS_TSC_PG_PRESC_VS_CTPL(__PGPSC__, __CTPL__) ((((__PGPSC__) == TSC_PG_PRESC_DIV1) && ((__CTPL__) > TSC_CTPL_2CYCLES)) || \ + (((__PGPSC__) == TSC_PG_PRESC_DIV2) && ((__CTPL__) > TSC_CTPL_1CYCLE)) || \ + (((__PGPSC__) > TSC_PG_PRESC_DIV2) && (((__CTPL__) == TSC_CTPL_1CYCLE) || ((__CTPL__) > TSC_CTPL_1CYCLE)))) + #define IS_TSC_MCV(__VALUE__) (((__VALUE__) == TSC_MCV_255) || \ ((__VALUE__) == TSC_MCV_511) || \ ((__VALUE__) == TSC_MCV_1023) || \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h index 178eda1878..a1b1924043 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart.h @@ -51,7 +51,7 @@ typedef struct #if defined(LPUART1) LPUART: ======= - Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) where lpuart_ker_ck_pres is the UART input clock divided by a prescaler UART: ===== @@ -59,9 +59,11 @@ typedef struct - If oversampling is 16 or in LIN mode, Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) - If oversampling is 8, - Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] Baud Rate Register[3] = 0 - Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / ((huart->Init.BaudRate)))[3:0]) >> 1 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 where uart_ker_ck_pres is the UART input clock divided by a prescaler */ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. @@ -84,7 +86,8 @@ typedef struct or disabled. This parameter can be a value of @ref UART_Hardware_Flow_Control. */ - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8). + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). This parameter can be a value of @ref UART_Over_Sampling. */ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. @@ -103,7 +106,8 @@ typedef struct { uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several Advanced Features may be initialized at the same time . - This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */ + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. This parameter can be a value of @ref UART_Tx_Inv. */ @@ -137,7 +141,8 @@ typedef struct /** * @brief HAL UART State definition - * @note HAL UART State value is a combination of 2 different substates: gState and RxState (see @ref UART_State_Definition). + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). * - gState contains UART state information related to global Handle management * and also information related to Tx operations. * gState value coding follow below described bitmap : @@ -148,7 +153,7 @@ typedef struct * 11 : Error * b5 Peripheral initialization status * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized. HAL UART Init function already called) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) * b4-b3 (not used) * xx : Should be set to 00 * b2 Intrinsic process state @@ -165,7 +170,7 @@ typedef struct * xx : Should be set to 00 * b5 Peripheral initialization status * 0 : Reset (Peripheral not initialized) - * 1 : Init done (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) * b4-b2 (not used) * xxx : Should be set to 000 * b1 Rx state @@ -190,6 +195,17 @@ typedef enum } UART_ClockSourceTypeDef; /** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * It is expected to admit following values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** * @brief UART handle Structure definition */ typedef struct __UART_HandleTypeDef @@ -221,6 +237,8 @@ typedef struct __UART_HandleTypeDef uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ @@ -232,11 +250,11 @@ typedef struct __UART_HandleTypeDef HAL_LockTypeDef Lock; /*!< Locking object */ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_UART_StateTypeDef */ + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ - __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. - This parameter can be a value of @ref HAL_UART_StateTypeDef */ + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ __IO uint32_t ErrorCode; /*!< UART Error code */ @@ -252,6 +270,7 @@ typedef struct __UART_HandleTypeDef void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ @@ -286,6 +305,7 @@ typedef enum * @brief HAL UART Callback pointer definition */ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ @@ -312,8 +332,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer #define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing Value is allowed for RxState only */ #define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState. - Value is result of combination (Or) between gState and RxState values */ + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ #define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state Value is allowed for gState only */ #define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error @@ -325,16 +345,16 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_Error_Definition UART Error Definition * @{ */ -#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ -#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ -#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ -#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */ -#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ -#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */ +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ /** * @} @@ -431,10 +451,14 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode * @{ */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection on falling edge */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection on 0x7F frame detection */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection on 0x55 frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ /** * @} */ @@ -596,8 +620,10 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_MSB_First UART Advanced Feature MSB First * @{ */ -#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ -#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ /** * @} */ @@ -623,7 +649,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register * @{ */ -#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ /** * @} */ @@ -631,9 +657,10 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection * @{ */ -#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ -#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ -#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register not empty or RXFIFO is not empty */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ /** * @} */ @@ -650,7 +677,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register * @{ */ -#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB position in CR1 register */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ /** * @} */ @@ -658,7 +686,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register * @{ */ -#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB position in CR1 register */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ /** * @} */ @@ -733,28 +762,28 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * - ZZZZ : Flag position in the ISR register(4bits) * @{ */ -#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ -#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ -#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ -#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ -#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ -#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ -#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ -#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ -#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ -#define UART_IT_CM 0x112EU /*!< UART character match interruption */ -#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ -#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ -#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ -#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ -#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ -#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ -#define UART_IT_ERR 0x0060U /*!< UART error interruption */ +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ -#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ -#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ -#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ /** * @} */ @@ -778,6 +807,16 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @} */ +/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ /** * @} @@ -929,10 +968,15 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) * @retval None */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK)))) - +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) /** @brief Disable the specified UART interrupt. * @param __HANDLE__ specifies the UART Handle. @@ -957,9 +1001,15 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) * @retval None */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK)))) +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) /** @brief Check whether the specified UART interrupt has occurred or not. * @param __HANDLE__ specifies the UART Handle. @@ -1010,9 +1060,13 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) * @retval The new state of __INTERRUPT__ (SET or RESET). */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ? (__HANDLE__)->Instance->CR1 : \ - (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET) +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) /** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. * @param __HANDLE__ specifies the UART Handle. @@ -1079,8 +1133,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). * @param __HANDLE__ specifies the UART Handle. * @retval None */ @@ -1097,8 +1152,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). * @param __HANDLE__ specifies the UART Handle. * @retval None */ @@ -1115,8 +1171,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). * @param __HANDLE__ specifies the UART Handle. * @retval None */ @@ -1133,8 +1190,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). * @param __HANDLE__ specifies the UART Handle. * @retval None */ @@ -1176,9 +1234,11 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)\ - + (uint32_t)((__BAUD__)/2U)) / (__BAUD__))) -#endif +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) +#endif /* LPUART1 */ /** @brief BRR division operation to set BRR register in 8-bit oversampling mode. * @param __PCLK__ UART clock. @@ -1186,8 +1246,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U)\ - + ((__BAUD__)/2U)) / (__BAUD__)) +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) /** @brief BRR division operation to set BRR register in 16-bit oversampling mode. * @param __PCLK__ UART clock. @@ -1195,8 +1255,8 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __CLOCKPRESCALER__ UART prescaler value. * @retval Division result */ -#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])\ - + ((__BAUD__)/2U)) / (__BAUD__)) +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) #if defined(LPUART1) /** @brief Check whether or not UART instance is Low Power UART. @@ -1204,7 +1264,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) */ #define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) -#endif +#endif /* LPUART1 */ /** @brief Check UART Baud rate. * @param __BAUDRATE__ Baudrate specified by the user. @@ -1244,7 +1304,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer */ #define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ ((__STOPBITS__) == UART_STOPBITS_2)) -#endif +#endif /* LPUART1 */ /** * @brief Ensure that UART frame parity is valid. @@ -1441,8 +1501,9 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer * @param __AUTOBAUDRATE__ UART auto Baud rate state. * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) */ -#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ - ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) /** * @brief Ensure that UART DMA enabling or disabling on error setting is valid. @@ -1520,7 +1581,7 @@ typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer /* Prescaler Table used in BRR computation macros. - Declared as extern here to allow use of private UART macros, outside of HAL UART fonctions */ + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ extern const uint16_t UARTPrescTable[12]; @@ -1547,6 +1608,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ /** @@ -1585,6 +1649,8 @@ void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + /** * @} */ @@ -1630,13 +1696,15 @@ uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); * @{ */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) -void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); -void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h index 1544e69d74..c0a40b3f46 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_uart_ex.h @@ -174,6 +174,11 @@ HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + + /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_usart.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_usart.h index 640557261b..1cc6d453e9 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_usart.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_usart.h @@ -138,7 +138,7 @@ typedef struct __USART_HandleTypeDef uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ - uint32_t SlaveMode; /*!< Enable/Disable UART SPI Slave Mode. This parameter can be a value + uint32_t SlaveMode; /*!< Enable/Disable USART SPI Slave Mode. This parameter can be a value of @ref USARTEx_Slave_Mode */ uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value @@ -697,7 +697,7 @@ typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< poin /** @brief BRR division operation to set BRR register in 8-bit oversampling mode. * @param __PCLK__ USART clock. * @param __BAUD__ Baud rate set by the user. - * @param __CLOCKPRESCALER__ UART prescaler value. + * @param __CLOCKPRESCALER__ USART prescaler value. * @retval Division result */ #define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U) + ((__BAUD__)/2U)) / (__BAUD__)) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h index 8d6978409f..982848c913 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_hal_wwdg.h @@ -56,7 +56,7 @@ typedef struct uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ - uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not. + uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not. This parameter can be a value of @ref WWDG_EWI_Mode */ } WWDG_InitTypeDef; @@ -68,17 +68,17 @@ typedef struct typedef struct __WWDG_HandleTypeDef #else typedef struct -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ { WWDG_TypeDef *Instance; /*!< Register base address */ WWDG_InitTypeDef Init; /*!< WWDG required parameters */ #if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) - void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */ + void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */ - void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */ -#endif + void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */ +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ } WWDG_HandleTypeDef; #if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) @@ -87,8 +87,8 @@ typedef struct */ typedef enum { - HAL_WWDG_EWI_CB_ID = 0x00u, /*!< WWDG EWI callback ID */ - HAL_WWDG_MSPINIT_CB_ID = 0x01u, /*!< WWDG MspInit callback ID */ + HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */ + HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */ } HAL_WWDG_CallbackIDTypeDef; /** @@ -96,7 +96,7 @@ typedef enum */ typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */ -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ /** * @} */ @@ -268,9 +268,10 @@ HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); /* Callbacks Register/UnRegister functions ***********************************/ #if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1) -HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback); HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID); -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h index 83f03edfd8..e6a9c714b0 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_adc.h @@ -53,6 +53,9 @@ extern "C" { /* Internal register offset for ADC group regular sequencer configuration */ /* (offset placed into a spare area of literal definition) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* No register ADC_SQRx on this ADC peripheral version */ +#else #define ADC_SQR1_REGOFFSET (0x00000000UL) #define ADC_SQR2_REGOFFSET (0x00000100UL) #define ADC_SQR3_REGOFFSET (0x00000200UL) @@ -60,10 +63,21 @@ extern "C" { #define ADC_REG_SQRX_REGOFFSET_MASK (ADC_SQR1_REGOFFSET | ADC_SQR2_REGOFFSET | ADC_SQR3_REGOFFSET | ADC_SQR4_REGOFFSET) #define ADC_SQRX_REGOFFSET_POS (8UL) /* Position of bits ADC_SQRx_REGOFFSET in ADC_REG_SQRX_REGOFFSET_MASK */ +#endif /* ADC_SUPPORT_2_5_MSPS */ #define ADC_REG_RANK_ID_SQRX_MASK (ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0) /* Definition of ADC group regular sequencer bits information to be inserted */ /* into ADC group regular sequencer ranks literals definition. */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ1" position in register */ +#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ2" position in register */ +#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ3" position in register */ +#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ4" position in register */ +#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ5" position in register */ +#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ6" position in register */ +#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ7" position in register */ +#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ8" position in register */ +#else #define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_SQR1_SQ1" position in register */ #define ADC_REG_RANK_2_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_SQR1_SQ2" position in register */ #define ADC_REG_RANK_3_SQRX_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_SQR1_SQ3" position in register */ @@ -80,6 +94,7 @@ extern "C" { #define ADC_REG_RANK_14_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_SQR3_SQ14" position in register */ #define ADC_REG_RANK_15_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SQR4_SQ15" position in register */ #define ADC_REG_RANK_16_SQRX_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_SQR4_SQ16" position in register */ +#endif /* ADC_SUPPORT_2_5_MSPS */ @@ -176,11 +191,18 @@ extern "C" { /* - channel sampling time defined by SMPRx register offset */ /* and SMPx bits positions into SMPRx register */ #define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR_AWD1CH) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL) +#else #define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_AWD2CR_AWD2CH) +#endif #define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Value equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 serie, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */ +#endif #define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | ADC_CHANNEL_ID_INTERNAL_CH_MASK) /* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */ -#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (ADC_SQR2_SQ5) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ +#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FUL) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> [Position of bitfield "ADC_CHANNEL_NUMBER_MASK" in register]) */ /* Channel differentiation between external and internal channels */ #define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000UL) /* Marker of internal channel */ @@ -221,6 +243,27 @@ extern "C" { /* Definition of channels ID bitfield information to be inserted into */ /* channels literals definition. */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0) +#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1) +#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2) +#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3) +#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4) +#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5) +#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6) +#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7) +#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8) +#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9) +#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10) +#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11) +#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12) +#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13) +#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14) +#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15) +#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16) +#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17) +#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18) +#else #define ADC_CHANNEL_0_BITFIELD (ADC_AWD2CR_AWD2CH_0) #define ADC_CHANNEL_1_BITFIELD (ADC_AWD2CR_AWD2CH_1) #define ADC_CHANNEL_2_BITFIELD (ADC_AWD2CR_AWD2CH_2) @@ -240,6 +283,7 @@ extern "C" { #define ADC_CHANNEL_16_BITFIELD (ADC_AWD2CR_AWD2CH_16) #define ADC_CHANNEL_17_BITFIELD (ADC_AWD2CR_AWD2CH_17) #define ADC_CHANNEL_18_BITFIELD (ADC_AWD2CR_AWD2CH_18) +#endif /* Definition of channels sampling time information to be inserted into */ /* channels literals definition. */ @@ -264,6 +308,20 @@ extern "C" { #define ADC_CHANNEL_18_SMP (ADC_SMPR2_REGOFFSET | ((24UL) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) /* Value shifted is equivalent to bitfield "ADC_SMPR2_SMP18" position in register */ +#if defined(ADC_SUPPORT_2_5_MSPS) +/* Internal mask for ADC channel sampling time: */ +/* To select into literals LL_ADC_SAMPLINGTIME_x */ +/* the relevant bits for: */ +/* (concatenation of multiple bits used in register SMPR) */ +/* - ADC channels sampling time: setting channel wise, to map each channel */ +/* on one of the common sampling time available. */ +/* - ADC channels common sampling time: set a sampling time into one of the */ +/* common sampling time available. */ +#define ADC_SAMPLING_TIME_CH_MASK (ADC_CHANNEL_ID_BITFIELD_MASK << ADC_SMPR_SMPSEL0_BITOFFSET_POS) +#define ADC_SAMPLING_TIME_SMP_MASK (ADC_SMPR_SMP2 | ADC_SMPR_SMP1) +#define ADC_SAMPLING_TIME_SMP_SHIFT_MASK (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SMPR_SMP1_BITOFFSET_POS) + +#endif /* Internal mask for ADC mode single or differential ended: */ /* To select into literals LL_ADC_SINGLE_ENDED or LL_ADC_SINGLE_DIFFERENTIAL */ /* the relevant bits for: */ @@ -298,10 +356,16 @@ extern "C" { #define ADC_AWD_CR12_REGOFFSETGAP_VAL (0x00000024UL) #define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET | ADC_AWD_CR2_REGOFFSET | ADC_AWD_CR3_REGOFFSET) +#define ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS (20UL) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK) +#else #define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR_AWD1CH | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) #define ADC_AWD_CR23_CHANNEL_MASK (ADC_AWD2CR_AWD2CH) #define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR23_CHANNEL_MASK) +#endif #define ADC_AWD_CRX_REGOFFSET_POS (20UL) /* Position of bits ADC_AWD_CRx_REGOFFSET in ADC_AWD_CRX_REGOFFSET_MASK */ @@ -325,15 +389,49 @@ extern "C" { /* ADC registers bits positions */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR1_RES" position in register */ +#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */ +#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */ +#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */ +#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */ +#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */ +#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */ +#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */ +#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */ +#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */ +#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */ +#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */ +#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */ +#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */ +#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */ +#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */ +#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */ +#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */ +#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */ +#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */ +#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */ +#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */ +#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SMPR_SMP1" position in register */ +#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_SMPR_SMP2" position in register */ +#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */ +#define ADC_CFGR_RES_BITOFFSET_POS ADC_CFGR1_RES_BITOFFSET_POS +#define ADC_CFGR_AWDSGL_BITOFFSET_POS ADC_CFGR1_AWDSGL_BITOFFSET_POS +#else #define ADC_CFGR_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR_RES" position in register */ #define ADC_CFGR_AWD1SGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR_AWD1SGL" position in register */ #define ADC_CFGR_AWD1EN_BITOFFSET_POS (23UL) /* Value equivalent to bitfield "ADC_CFGR_AWD1EN" position in register */ #define ADC_CFGR_JAWD1EN_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CFGR_JAWD1EN" position in register */ #define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */ +#endif /* ADC registers bits groups */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */ +#else #define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */ +#endif /* ADC internal channels related definitions */ @@ -424,6 +522,17 @@ typedef struct */ typedef struct { +#if defined (ADC_SUPPORT_2_5_MSPS) + uint32_t Clock; /*!< Set ADC instance clock source and prescaler. + This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE + @note On this STM32 serie, this parameter has some clock ratio constraints: + ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle + (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle). + + This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock(). + For more details, refer to description of this function. */ + +#endif uint32_t Resolution; /*!< Set ADC resolution. This parameter can be a value of @ref ADC_LL_EC_RESOLUTION @@ -501,6 +610,9 @@ typedef struct } LL_ADC_REG_InitTypeDef; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Structure definition of some features of ADC group injected. * @note These parameters have an impact on ADC scope: ADC group injected. @@ -549,6 +661,7 @@ typedef struct This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTrigAuto(). */ } LL_ADC_INJ_InitTypeDef; +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} @@ -565,6 +678,10 @@ typedef struct * @{ */ #define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_FLAG_CCRDY ADC_ISR_CCRDY /*!< ADC flag ADC channel configuration ready */ +#else +#endif #define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary conversion */ #define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence conversions */ #define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */ @@ -575,6 +692,9 @@ typedef struct #define LL_ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC flag ADC analog watchdog 1 */ #define LL_ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC flag ADC analog watchdog 2 */ #define LL_ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC flag ADC analog watchdog 3 */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_FLAG_EOCAL ADC_ISR_EOCAL /*!< ADC flag end of calibration */ +#endif /** * @} */ @@ -584,6 +704,10 @@ typedef struct * @{ */ #define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_IT_CCRDY ADC_IER_CCRDYIE /*!< ADC interruption channel configuration ready */ +#else +#endif #define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion */ #define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence conversions */ #define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */ @@ -594,6 +718,9 @@ typedef struct #define LL_ADC_IT_AWD1 ADC_IER_AWD1IE /*!< ADC interruption ADC analog watchdog 1 */ #define LL_ADC_IT_AWD2 ADC_IER_AWD2IE /*!< ADC interruption ADC analog watchdog 2 */ #define LL_ADC_IT_AWD3 ADC_IER_AWD3IE /*!< ADC interruption ADC analog watchdog 3 */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_IT_EOCAL ADC_IER_EOCALIE /*!< ADC interruption ADC end of calibration */ +#endif /** * @} */ @@ -612,9 +739,11 @@ typedef struct /** @defgroup ADC_LL_EC_COMMON_CLOCK_SOURCE ADC common - Clock source * @{ */ +#if !defined (ADC_SUPPORT_2_5_MSPS) #define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock without prescaler */ #define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CCR_CKMODE_1 ) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 2 */ #define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CCR_CKMODE_1 | ADC_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock with prescaler division by 4 */ +#endif #define LL_ADC_CLOCK_ASYNC_DIV1 (0x00000000UL) /*!< ADC asynchronous clock without prescaler */ #define LL_ADC_CLOCK_ASYNC_DIV2 (ADC_CCR_PRESC_0) /*!< ADC asynchronous clock with prescaler division by 2 */ #define LL_ADC_CLOCK_ASYNC_DIV4 (ADC_CCR_PRESC_1 ) /*!< ADC asynchronous clock with prescaler division by 4 */ @@ -639,7 +768,7 @@ typedef struct /* If they are not listed below, they do not require any specific */ /* path enable. In this case, Access to measurement path is done */ /* only by selecting the corresponding ADC internal channel. */ -#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement pathes all disabled */ +#define LL_ADC_PATH_INTERNAL_NONE (0x00000000UL) /*!< ADC measurement paths all disabled */ #define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */ #define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel temperature sensor */ #define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */ @@ -647,6 +776,19 @@ typedef struct * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source + * @{ + */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by 4 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by 2 */ +#define LL_ADC_CLOCK_SYNC_PCLK_DIV1 (ADC_CFGR2_CKMODE_1 | ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock not divided */ +#define LL_ADC_CLOCK_ASYNC (0x00000000UL) /*!< ADC asynchronous clock. Asynchronous clock prescaler can be configured using function @ref LL_ADC_SetCommonClock(). */ +/** + * @} + */ +#endif + /** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution * @{ */ @@ -662,7 +804,7 @@ typedef struct * @{ */ #define LL_ADC_DATA_ALIGN_RIGHT (0x00000000UL) /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/ -#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR_ALIGN) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/ +#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/ /** * @} */ @@ -671,11 +813,37 @@ typedef struct * @{ */ #define LL_ADC_LP_MODE_NONE (0x00000000UL) /*!< No ADC low power mode activated */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC automatically powers-off after a ADC conversion and automatically wakes up when a new ADC conversion is triggered (with startup time between trigger and start of sampling). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */ +#else #define LL_ADC_LP_AUTOWAIT (ADC_CFGR_AUTDLY) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */ +#endif /** * @} */ +/** @defgroup ADC_LL_EC_REG_TRIGGER_FREQ ADC group regular - Trigger frequency mode + * @{ + */ +#define LL_ADC_TRIGGER_FREQ_HIGH (0x00000000UL) /*!< ADC trigger frequency mode set to high frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +#define LL_ADC_TRIGGER_FREQ_LOW (ADC_CFGR2_LFTRIG) /*!< ADC trigger frequency mode set to low frequency. Note: ADC trigger frequency mode must be set to low frequency when a duration is exceeded before ADC conversion start trigger event (between ADC enable and ADC conversion start trigger event or between two ADC conversion start trigger event). Duration value: Refer to device datasheet, parameter "tIdle". */ +/** + * @} + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_LL_EC_SAMPLINGTIME_COMMON ADC instance - Sampling time common to a group of channels +* @{ +*/ +#define LL_ADC_SAMPLINGTIME_COMMON_1 (ADC_SMPR_SMP1_BITOFFSET_POS) /*!< Set sampling time common to a group of channels: sampling time nb 1 */ +#define LL_ADC_SAMPLINGTIME_COMMON_2 (ADC_SMPR_SMP2_BITOFFSET_POS | ADC_SAMPLING_TIME_CH_MASK) /*!< Set sampling time common to a group of channels: sampling time nb 2 */ +/** + * @} + */ + +#endif /** @defgroup ADC_LL_EC_OFFSET_NB ADC instance - Offset number * @{ */ @@ -700,8 +868,10 @@ typedef struct * @{ */ #define LL_ADC_GROUP_REGULAR (0x00000001UL) /*!< ADC group regular (available on all STM32 devices) */ +#if !defined (ADC_SUPPORT_2_5_MSPS) #define LL_ADC_GROUP_INJECTED (0x00000002UL) /*!< ADC group injected (not available on all STM32 devices)*/ #define LL_ADC_GROUP_REGULAR_INJECTED (0x00000003UL) /*!< ADC both groups regular and injected */ +#endif /** * @} */ @@ -709,6 +879,30 @@ typedef struct /** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ +#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ +#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ +#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */ +#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */ +#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */ +#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */ +#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */ +#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */ +#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */ +#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */ +#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */ +#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */ +#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */ +#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */ +#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */ +#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */ +#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */ +#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */ +#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_13 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ +#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_12 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ +#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_14 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda. */ +#else #define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_SMP | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */ #define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_SMP | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */ #define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_SMP | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */ @@ -731,6 +925,8 @@ typedef struct #define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_0 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */ #define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */ #define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/2: Vbat voltage through a divider ladder of factor 1/2 to have Vbat always below Vdda. */ + +#endif /** * @} */ @@ -738,6 +934,15 @@ typedef struct /** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular conversion trigger internal: SW start. */ +#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 ( ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 ( ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH4 ( ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_TIM2_CH3 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +#else #define LL_ADC_REG_TRIG_SOFTWARE (0x00000000UL) /*!< ADC group regular conversion trigger internal: SW start. */ #define LL_ADC_REG_TRIG_EXT_TIM1_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ #define LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */ @@ -747,6 +952,7 @@ typedef struct #define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ #define LL_ADC_REG_TRIG_EXT_TIM2_CH2 (ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 channel 2 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ #define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */ +#endif /** * @} */ @@ -791,9 +997,30 @@ typedef struct * @} */ +#if defined(ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_LL_EC_REG_SEQ_MODE ADC group regular - Sequencer configuration flexibility +* @{ +*/ +#define LL_ADC_REG_SEQ_FIXED (0x00000000UL) /*!< Sequencer configured to fully configurable: sequencer length and each rank affectation to a channel are configurable. Refer to description of function @ref LL_ADC_REG_SetSequencerLength(). */ +#define LL_ADC_REG_SEQ_CONFIGURABLE (ADC_CFGR1_CHSELRMOD) /*!< Sequencer configured to not fully configurable: sequencer length and each rank affectation to a channel are fixed by channel HW number. Refer to description of function @ref LL_ADC_REG_SetSequencerChannels(). */ +/** + * @} + */ + +#endif /** @defgroup ADC_LL_EC_REG_SEQ_SCAN_LENGTH ADC group regular - Sequencer scan length * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_REG_SEQ_SCAN_DISABLE (ADC_CHSELR_SQ2) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS (ADC_CHSELR_SQ3) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS (ADC_CHSELR_SQ4) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS (ADC_CHSELR_SQ5) /*!< ADC group regular sequencer enable with 4 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS (ADC_CHSELR_SQ6) /*!< ADC group regular sequencer enable with 5 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS (ADC_CHSELR_SQ7) /*!< ADC group regular sequencer enable with 6 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS (ADC_CHSELR_SQ8) /*!< ADC group regular sequencer enable with 7 ranks in the sequence */ +#define LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS (0x00000000UL) /*!< ADC group regular sequencer enable with 8 ranks in the sequence */ +#else #define LL_ADC_REG_SEQ_SCAN_DISABLE (0x00000000UL) /*!< ADC group regular sequencer disable (equivalent to sequencer of 1 rank: ADC conversion on only 1 channel) */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS ( ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 2 ranks in the sequence */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS ( ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 3 ranks in the sequence */ @@ -810,14 +1037,29 @@ typedef struct #define LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 14 ranks in the sequence */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 ) /*!< ADC group regular sequencer enable with 15 ranks in the sequence */ #define LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (ADC_SQR1_L_3 | ADC_SQR1_L_2 | ADC_SQR1_L_1 | ADC_SQR1_L_0) /*!< ADC group regular sequencer enable with 16 ranks in the sequence */ +#endif +/** + * @} + */ + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction + * @{ + */ +#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000UL) /*!< On this STM32 serie, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction forward: from lowest channel number to highest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer). On some other STM32 families, this setting is not available and the default scan direction is forward. */ +#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< On this STM32 serie, parameter relevant only is sequencer set to mode not fully configurable, refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). ADC group regular sequencer scan direction backward: from highest channel number to lowest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer) */ /** * @} */ +#endif /** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode * @{ */ #define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000UL) /*!< ADC group regular sequencer discontinuous mode disable */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ +#else #define LL_ADC_REG_SEQ_DISCONT_1RANK ( ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */ #define LL_ADC_REG_SEQ_DISCONT_2RANKS ( ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enabled with sequence interruption every 2 ranks */ #define LL_ADC_REG_SEQ_DISCONT_3RANKS ( ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 3 ranks */ @@ -826,6 +1068,7 @@ typedef struct #define LL_ADC_REG_SEQ_DISCONT_6RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 6 ranks */ #define LL_ADC_REG_SEQ_DISCONT_7RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 7 ranks */ #define LL_ADC_REG_SEQ_DISCONT_8RANKS (ADC_CFGR_DISCNUM_2 | ADC_CFGR_DISCNUM_1 | ADC_CFGR_DISCNUM_0 | ADC_CFGR_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every 8 ranks */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -833,6 +1076,16 @@ typedef struct /** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC group regular - Sequencer ranks * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_REG_RANK_1 (ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ +#define LL_ADC_REG_RANK_2 (ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ +#define LL_ADC_REG_RANK_3 (ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ +#define LL_ADC_REG_RANK_4 (ADC_REG_RANK_4_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 4 */ +#define LL_ADC_REG_RANK_5 (ADC_REG_RANK_5_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 5 */ +#define LL_ADC_REG_RANK_6 (ADC_REG_RANK_6_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 6 */ +#define LL_ADC_REG_RANK_7 (ADC_REG_RANK_7_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 7 */ +#define LL_ADC_REG_RANK_8 (ADC_REG_RANK_8_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 8 */ +#else #define LL_ADC_REG_RANK_1 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_1_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 1 */ #define LL_ADC_REG_RANK_2 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_2_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 2 */ #define LL_ADC_REG_RANK_3 (ADC_SQR1_REGOFFSET | ADC_REG_RANK_3_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 3 */ @@ -849,10 +1102,14 @@ typedef struct #define LL_ADC_REG_RANK_14 (ADC_SQR3_REGOFFSET | ADC_REG_RANK_14_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 14 */ #define LL_ADC_REG_RANK_15 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_15_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 15 */ #define LL_ADC_REG_RANK_16 (ADC_SQR4_REGOFFSET | ADC_REG_RANK_16_SQRX_BITOFFSET_POS) /*!< ADC group regular sequencer rank 16 */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_LL_EC_INJ_TRIGGER_SOURCE ADC group injected - Trigger source * @{ */ @@ -926,10 +1183,21 @@ typedef struct /** * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000UL) /*!< Sampling time 1.5 ADC clock cycle */ +#define LL_ADC_SAMPLINGTIME_3CYCLES_5 (ADC_SMPR_SMP1_0) /*!< Sampling time 3.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP1_1) /*!< Sampling time 7.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_12CYCLES_5 (ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 12.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_19CYCLES_5 (ADC_SMPR_SMP1_2) /*!< Sampling time 19.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_39CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_0) /*!< Sampling time 39.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_79CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1) /*!< Sampling time 79.5 ADC clock cycles */ +#define LL_ADC_SAMPLINGTIME_160CYCLES_5 (ADC_SMPR_SMP1_2 | ADC_SMPR_SMP1_1 | ADC_SMPR_SMP1_0) /*!< Sampling time 160.5 ADC clock cycles */ +#else #define LL_ADC_SAMPLINGTIME_2CYCLES_5 (0x00000000UL) /*!< Sampling time 2.5 ADC clock cycles */ #define LL_ADC_SAMPLINGTIME_6CYCLES_5 ( ADC_SMPR2_SMP10_0) /*!< Sampling time 6.5 ADC clock cycles */ #define LL_ADC_SAMPLINGTIME_12CYCLES_5 ( ADC_SMPR2_SMP10_1 ) /*!< Sampling time 12.5 ADC clock cycles */ @@ -938,6 +1206,7 @@ typedef struct #define LL_ADC_SAMPLINGTIME_92CYCLES_5 (ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_0) /*!< Sampling time 92.5 ADC clock cycles */ #define LL_ADC_SAMPLINGTIME_247CYCLES_5 (ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1 ) /*!< Sampling time 247.5 ADC clock cycles */ #define LL_ADC_SAMPLINGTIME_640CYCLES_5 (ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1 | ADC_SMPR2_SMP10_0) /*!< Sampling time 640.5 ADC clock cycles */ +#endif /** * @} */ @@ -945,9 +1214,13 @@ typedef struct /** @defgroup ADC_LL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_SINGLE_ENDED (0x00000000UL) /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */ +#else #define LL_ADC_SINGLE_ENDED ( ADC_CALFACT_CALFACT_S) /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */ #define LL_ADC_DIFFERENTIAL_ENDED (ADC_CR_ADCALDIF | ADC_CALFACT_CALFACT_D) /*!< ADC channel ending set to differential (literal also used to set calibration mode) */ #define LL_ADC_BOTH_SINGLE_DIFF_ENDED (LL_ADC_SINGLE_ENDED | LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to both single ended and differential (literal used only to set calibration factors) */ +#endif /** * @} */ @@ -956,8 +1229,12 @@ typedef struct * @{ */ #define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC analog watchdog 2 and 3" not available on ADC peripheral of this STM32WB device */ +#else #define LL_ADC_AWD2 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR2_REGOFFSET) /*!< ADC analog watchdog number 2 */ #define LL_ADC_AWD3 (ADC_AWD_CR23_CHANNEL_MASK | ADC_AWD_CR3_REGOFFSET) /*!< ADC analog watchdog number 3 */ +#endif /** * @} */ @@ -965,6 +1242,32 @@ typedef struct /** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring disabled */ +#define LL_ADC_AWD_ALL_CHANNELS_REG ( ADC_CFGR1_AWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */ +#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */ +#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */ +#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */ +#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */ +#else #define LL_ADC_AWD_DISABLE (0x00000000UL) /*!< ADC analog watchdog monitoring disabled */ #define LL_ADC_AWD_ALL_CHANNELS_REG (ADC_AWD_CR23_CHANNEL_MASK | ADC_CFGR_AWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */ #define LL_ADC_AWD_ALL_CHANNELS_INJ (ADC_AWD_CR23_CHANNEL_MASK | ADC_CFGR_JAWD1EN ) /*!< ADC analog watchdog monitoring of all channels, converted by group injected only */ @@ -1035,6 +1338,7 @@ typedef struct #define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */ #define LL_ADC_AWD_CH_VBAT_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group injected only */ #define LL_ADC_AWD_CH_VBAT_REG_INJ ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -1052,11 +1356,16 @@ typedef struct /** @defgroup ADC_LL_EC_OVS_SCOPE Oversampling - Oversampling scope * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ +#define LL_ADC_OVS_GRP_REGULAR_CONTINUED ( ADC_CFGR2_OVSE) /*!< ADC oversampling on conversions of ADC group regular. Literal suffix "continued" is kept for compatibility with other STM32 devices featuring ADC group injected, in this case other oversampling scope parameters are available. */ +#else #define LL_ADC_OVS_DISABLE (0x00000000UL) /*!< ADC oversampling disabled. */ #define LL_ADC_OVS_GRP_REGULAR_CONTINUED ( ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of ADC group regular. If group injected interrupts group regular: when ADC group injected is triggered, the oversampling on ADC group regular is temporary stopped and continued afterwards. */ #define LL_ADC_OVS_GRP_REGULAR_RESUMED (ADC_CFGR2_ROVSM | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of ADC group regular. If group injected interrupts group regular: when ADC group injected is triggered, the oversampling on ADC group regular is resumed from start (oversampler buffer reset). */ #define LL_ADC_OVS_GRP_INJECTED ( ADC_CFGR2_JOVSE ) /*!< ADC oversampling on conversions of ADC group injected. */ #define LL_ADC_OVS_GRP_INJ_REG_RESUMED ( ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) /*!< ADC oversampling on conversions of both ADC groups regular and injected. If group injected interrupting group regular: when ADC group injected is triggered, the oversampling on ADC group regular is resumed from start (oversampler buffer reset). */ +#endif /** * @} */ @@ -1065,7 +1374,11 @@ typedef struct * @{ */ #define LL_ADC_OVS_REG_CONT (0x00000000UL) /*!< ADC oversampling discontinuous mode: continuous mode (all conversions of oversampling ratio are done from 1 trigger) */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TOVS) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +#else #define LL_ADC_OVS_REG_DISCONT (ADC_CFGR2_TROVS) /*!< ADC oversampling discontinuous mode: discontinuous mode (each conversion of oversampling ratio needs a trigger) */ +#endif /** * @} */ @@ -1132,7 +1445,7 @@ typedef struct /* Delay set to maximum value (refer to device datasheet, */ /* parameter "tADCVREG_STUP"). */ /* Unit: us */ -#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 10UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */ +#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */ /* Delay for internal voltage reference stabilization time. */ /* Delay set to maximum value (refer to device datasheet, */ @@ -1144,7 +1457,8 @@ typedef struct /* Literal set to maximum value (refer to device datasheet, */ /* parameter "tSTART"). */ /* Unit: us */ -#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time */ +#define LL_ADC_DELAY_TEMPSENSOR_STAB_US (120UL) /*!< Delay for temperature sensor stabilization time */ +#define LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US ( 15UL) /*!< Delay for temperature sensor buffer stabilization time (starting from ADC enable, refer to @ref LL_ADC_Enable()) */ /* Delay required between ADC end of calibration and ADC enable. */ /* Note: On this STM32 serie, a minimum number of ADC clock cycles */ @@ -1230,7 +1544,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval Value between Min_Data=0 and Max_Data=18 */ @@ -1276,12 +1590,19 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n * (4) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + ( \ + ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \ + (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__)) \ + ) +#else #define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ (((__DECIMAL_NB__) <= 9UL) \ ? ( \ @@ -1296,6 +1617,7 @@ typedef struct (ADC_SMPR2_REGOFFSET | (((3UL * ((__DECIMAL_NB__) - 10UL))) << ADC_CHANNEL_SMPx_BITOFFSET_POS)) \ ) \ ) +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Helper macro to determine whether the selected channel @@ -1338,7 +1660,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin). * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. @@ -1383,7 +1705,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 @@ -1437,6 +1759,78 @@ typedef struct ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT) \ ) +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Helper macro to define ADC analog watchdog parameter: + * define a single channel to monitor with analog watchdog + * from sequencer channel and groups definition. + * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels(). + * Example: + * LL_ADC_SetAnalogWDMonitChannels( + * ADC1, LL_ADC_AWD1, + * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR)) + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT (4) + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) + * @arg @ref LL_ADC_CHANNEL_VBAT (4) + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n + * (4) For ADC channel read back from ADC register, + * comparison with internal channel parameter to be done + * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(). + * @param __GROUP__ This parameter can be one of the following values: + * @arg @ref LL_ADC_GROUP_REGULAR + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_AWD_DISABLE + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (0) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (0) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG (0) + * + * (0) On STM32WB, parameter available only on analog watchdog number: AWD1. + */ +#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ + (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL) +#else /** * @brief Helper macro to define ADC analog watchdog parameter: * define a single channel to monitor with analog watchdog @@ -1470,7 +1864,7 @@ typedef struct * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n * (4) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done @@ -1482,76 +1876,77 @@ typedef struct * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_AWD_DISABLE * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0)(1) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (0) - * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0) - * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (0) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_VBAT_REG (0) - * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) * * (0) On STM32WB, parameter available only on analog watchdog number: AWD1. + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ #define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \ (((__GROUP__) == LL_ADC_GROUP_REGULAR) \ @@ -1562,6 +1957,7 @@ typedef struct : \ (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR_JAWD1EN | ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL) \ ) +#endif /** * @brief Helper macro to set the value of ADC analog watchdog threshold high @@ -1993,9 +2389,9 @@ __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Regis * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @param CommonClock This parameter can be one of the following values: - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (*) + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 (*) + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 (*) * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 @@ -2008,11 +2404,17 @@ __STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Regis * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 + * + * (*) Value available on all STM32 devices except: STM32W10xxx, STM32W15xxx. * @retval None */ __STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t CommonClock) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_PRESC, CommonClock); +#else MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_CKMODE | ADC_CCR_PRESC, CommonClock); +#endif } /** @@ -2022,9 +2424,9 @@ __STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uin * @param ADCxy_COMMON ADC common instance * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) * @retval Returned value can be one of the following values: - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 - * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (*) + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 (*) + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 (*) * @arg @ref LL_ADC_CLOCK_ASYNC_DIV1 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV2 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV4 @@ -2037,10 +2439,16 @@ __STATIC_INLINE void LL_ADC_SetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON, uin * @arg @ref LL_ADC_CLOCK_ASYNC_DIV64 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV128 * @arg @ref LL_ADC_CLOCK_ASYNC_DIV256 + * + * (*) Value available on all STM32 devices except: STM32W10xxx, STM32W15xxx. */ __STATIC_INLINE uint32_t LL_ADC_GetCommonClock(ADC_Common_TypeDef *ADCxy_COMMON) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_PRESC)); +#else return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_CKMODE | ADC_CCR_PRESC)); +#endif } /** @@ -2186,6 +2594,95 @@ __STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCx * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC instance clock source and prescaler. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled. + * @rmtoll CFGR2 CKMODE LL_ADC_SetClock + * @param ADCx ADC instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be configured using + * function @ref LL_ADC_SetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource); +} + +/** + * @brief Get ADC instance clock source and prescaler. + * @rmtoll CFGR2 CKMODE LL_ADC_GetClock + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2 + * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV1 (2) + * @arg @ref LL_ADC_CLOCK_ASYNC (1) + * + * (1) Asynchronous clock prescaler can be retrieved using + * function @ref LL_ADC_GetCommonClock().\n + * (2) Caution: This parameter has some clock ratio constraints: + * This configuration must be enabled only if PCLK has a 50% + * duty clock cycle (APB prescaler configured inside the RCC + * must be bypassed and the system clock must by 50% duty + * cycle). + * Refer to reference manual. + */ +__STATIC_INLINE uint32_t LL_ADC_GetClock(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE)); +} +#endif + +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note This function is intended to set calibration parameters + * without having to perform a new calibration using + * @ref LL_ADC_StartCalibration(). + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * (calibration factor must be specified for each of these + * differential modes, if used afterwards and if the application + * requires their calibration). + * @note In case of setting calibration factors of both modes single ended + * and differential (parameter LL_ADC_BOTH_SINGLE_DIFF_ENDED): + * both calibration factors must be concatenated. + * To perform this processing, use helper macro + * @ref __LL_ADC_CALIB_FACTOR_SINGLE_DIFF(). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be enabled, without calibration on going, without conversion + * on going on group regular. + * @rmtoll CALFACT CALFACT_S LL_ADC_SetCalibrationFactor\n + * CALFACT CALFACT_D LL_ADC_SetCalibrationFactor + * @param ADCx ADC instance + * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t CalibrationFactor) +{ + MODIFY_REG(ADCx->CALFACT, + ADC_CALFACT_CALFACT, + CalibrationFactor); +} +#else /** * @brief Set ADC calibration factor in the mode single-ended * or differential (for devices with differential mode available). @@ -2212,8 +2709,10 @@ __STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCx * @param ADCx ADC instance * @param SingleDiff This parameter can be one of the following values: * @arg @ref LL_ADC_SINGLE_ENDED - * @arg @ref LL_ADC_DIFFERENTIAL_ENDED - * @arg @ref LL_ADC_BOTH_SINGLE_DIFF_ENDED + * @arg @ref LL_ADC_DIFFERENTIAL_ENDED (1) + * @arg @ref LL_ADC_BOTH_SINGLE_DIFF_ENDED (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param CalibrationFactor Value between Min_Data=0x00 and Max_Data=0x7F * @retval None */ @@ -2223,7 +2722,27 @@ __STATIC_INLINE void LL_ADC_SetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t Sin SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK, CalibrationFactor << (((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >> ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4) & ~(SingleDiff & ADC_CALFACT_CALFACT_S))); } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Get ADC calibration factor in the mode single-ended + * or differential (for devices with differential mode available). + * @note Calibration factors are set by hardware after performing + * a calibration run using function @ref LL_ADC_StartCalibration(). + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * @rmtoll CALFACT CALFACT_S LL_ADC_GetCalibrationFactor\n + * CALFACT CALFACT_D LL_ADC_GetCalibrationFactor + * @param ADCx ADC instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7F + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT)); +} +#else /** * @brief Get ADC calibration factor in the mode single-ended * or differential (for devices with differential mode available). @@ -2248,7 +2767,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t /* containing other bits reserved for other purpose. */ return (uint32_t)(READ_BIT(ADCx->CALFACT, (SingleDiff & ADC_SINGLEDIFF_CALIB_FACTOR_MASK)) >> ((SingleDiff & ADC_SINGLEDIFF_CALIB_F_BIT_D_MASK) >> ADC_SINGLEDIFF_CALIB_F_BIT_D_SHIFT4)); } - +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Set ADC resolution. * Refer to reference manual for alignments formats @@ -2268,7 +2787,11 @@ __STATIC_INLINE uint32_t LL_ADC_GetCalibrationFactor(ADC_TypeDef *ADCx, uint32_t */ __STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_RES, Resolution); +#endif } /** @@ -2285,7 +2808,11 @@ __STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution */ __STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_RES)); +#endif } /** @@ -2305,7 +2832,11 @@ __STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_ALIGN, DataAlignment); +#endif } /** @@ -2320,7 +2851,11 @@ __STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAli */ __STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_ALIGN)); +#endif } /** @@ -2372,11 +2907,19 @@ __STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx) * @param LowPowerMode This parameter can be one of the following values: * @arg @ref LL_ADC_LP_MODE_NONE * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF (1) + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (1) + * + * (1) On STM32WB serie, parameter available only on devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_AUTDLY, LowPowerMode); +#endif } /** @@ -2424,12 +2967,157 @@ __STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPower * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_LP_MODE_NONE * @arg @ref LL_ADC_LP_AUTOWAIT + * @arg @ref LL_ADC_LP_AUTOPOWEROFF (1) + * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (1) + * + * (1) On STM32WB serie, parameter available only on devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF))); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_AUTDLY)); +#endif +} + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC trigger frequency mode. + * @note ADC trigger frequency mode must be set to low frequency when + * a duration is exceeded before ADC conversion start trigger event + * (between ADC enable and ADC conversion start trigger event + * or between two ADC conversion start trigger event). + * Duration value: Refer to device datasheet, parameter "tIdle". + * @note When ADC trigger frequency mode is set to low frequency, + * some rearm cycles are inserted before performing ADC conversion + * start, inducing a delay of 2 ADC clock cycles. + * @note Usage of ADC trigger frequency mode with ADC low power mode: + * - Low power mode auto wait: Only the first ADC conversion + * start trigger inserts the rearm delay. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR2 LFTRIG LL_ADC_SetTriggerFrequencyMode + * @param ADCx ADC instance + * @param TriggerFrequencyMode This parameter can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetTriggerFrequencyMode(ADC_TypeDef *ADCx, uint32_t TriggerFrequencyMode) +{ + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_LFTRIG, TriggerFrequencyMode); +} + +/** + * @brief Get ADC trigger frequency mode. + * @rmtoll CFGR2 LFTRIG LL_ADC_GetTriggerFrequencyMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_TRIGGER_FREQ_HIGH + * @arg @ref LL_ADC_TRIGGER_FREQ_LOW + */ +__STATIC_INLINE uint32_t LL_ADC_GetTriggerFrequencyMode(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_LFTRIG)); +} + +#endif +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 serie, sampling time scope is on ADC instance: + * Sampling time common to all channels, independently + * of channels mapped on ADC group regular or injected. + * (on some other STM32 families, sampling time is channel wise) + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 serie, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll SMPR SMP1 LL_ADC_SetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_SetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @param SamplingTime This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY, uint32_t SamplingTime) +{ + MODIFY_REG(ADCx->SMPR, + ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK), + SamplingTime << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); +} + +/** + * @brief Get sampling time common to a group of channels. + * @note Unit: ADC clock cycles. + * @note On this STM32 serie, sampling time scope is on ADC instance: + * Sampling time common to all channels, independently + * of channels mapped on ADC group regular or injected. + * (on some other STM32 families, sampling time is channel wise) + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 serie, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @rmtoll SMPR SMP1 LL_ADC_GetSamplingTimeCommonChannels\n + * @rmtoll SMPR SMP2 LL_ADC_GetSamplingTimeCommonChannels + * @param ADCx ADC instance + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5 + * @arg @ref LL_ADC_SAMPLINGTIME_3CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_12CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_19CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_39CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_79CYCLES_5 + * @arg @ref LL_ADC_SAMPLINGTIME_160CYCLES_5 + */ +__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTimeY) +{ + return (uint32_t)((READ_BIT(ADCx->SMPR, ADC_SMPR_SMP1 << (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK))) + >> (SamplingTimeY & ADC_SAMPLING_TIME_SMP_SHIFT_MASK)); } +#endif + +#if defined(ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC offset" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Set ADC selected offset number 1, 2, 3 or 4. * @note This function set the 2 items of offset configuration: @@ -2449,7 +3137,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) * ADC state: * ADC must be disabled or enabled without conversion on going * on either groups regular or injected. - * @note On STM32WB, some fast channels are available: fast analog inputs + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs * coming from GPIO pads (ADC_IN1..5). * @rmtoll OFR1 OFFSET1_CH LL_ADC_SetOffset\n * OFR1 OFFSET1 LL_ADC_SetOffset\n @@ -2493,7 +3181,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @param OffsetLevel Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None @@ -2523,7 +3211,7 @@ __STATIC_INLINE void LL_ADC_SetOffset(ADC_TypeDef *ADCx, uint32_t Offsety, uint3 * - To get the channel number in decimal format: * process the returned value with the helper macro * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB(). - * @note On STM32WB, some fast channels are available: fast analog inputs + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs * coming from GPIO pads (ADC_IN1..5). * @rmtoll OFR1 OFFSET1_CH LL_ADC_GetOffsetChannel\n * OFR2 OFFSET2_CH LL_ADC_GetOffsetChannel\n @@ -2559,7 +3247,7 @@ __STATIC_INLINE void LL_ADC_SetOffset(ADC_TypeDef *ADCx, uint32_t Offsety, uint3 * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n * (4) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done @@ -2657,6 +3345,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetOffsetState(ADC_TypeDef *ADCx, uint32_t Offse return (uint32_t) READ_BIT(*preg, ADC_OFR1_OFFSET1_EN); } +#endif /** * @} @@ -2676,6 +3365,10 @@ __STATIC_INLINE uint32_t LL_ADC_GetOffsetState(ADC_TypeDef *ADCx, uint32_t Offse * STM32 families having this setting set by HW default value). * In case of need to modify trigger edge, use * function @ref LL_ADC_REG_SetTriggerEdge(). + * @note On devices STM32WB10xx, STM32WB15xx: ADC trigger frequency mode must be set + * in function of frequency of ADC group regular conversion trigger. + * Refer to description of function + * "LL_ADC_SetTriggerFrequencyMode()". * @note Availability of parameters of trigger sources from timer * depends on timers availability on the selected device. * @note On this STM32 serie, setting of this feature is conditioned to @@ -2687,19 +3380,29 @@ __STATIC_INLINE uint32_t LL_ADC_GetOffsetState(ADC_TypeDef *ADCx, uint32_t Offse * @param ADCx ADC instance * @param TriggerSource This parameter can be one of the following values: * @arg @ref LL_ADC_REG_TRIG_SOFTWARE - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO (1) * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 (2) * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4 (2) * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. + * (2) On STM32WB serie, parameter available only devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL, TriggerSource); +#endif } /** @@ -2719,17 +3422,37 @@ __STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t Tri * @param ADCx ADC instance * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_REG_TRIG_SOFTWARE - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO (1) * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 - * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH1 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH2 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH3 (1) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4 (2) * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH2 + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH3 (2) + * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_CH4 (2) * @arg @ref LL_ADC_REG_TRIG_EXT_EXTI_LINE11 + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. + * (2) On STM32WB serie, parameter available only devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN); + + /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ + /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */ + uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL)); + + /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */ + /* to match with triggers literals definition. */ + return ((TriggerSource + & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL) + | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN) + ); +#else __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR, ADC_CFGR_EXTSEL | ADC_CFGR_EXTEN); /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */ @@ -2742,6 +3465,7 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR_EXTSEL) | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR_EXTEN) ); +#endif } /** @@ -2757,7 +3481,11 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx) */ __STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return ((READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN)) ? 1UL : 0UL); +#else return ((READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR_EXTEN)) ? 1UL : 0UL); +#endif } /** @@ -2777,7 +3505,11 @@ __STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_EXTEN, ExternalTriggerEdge); +#endif } /** @@ -2792,9 +3524,72 @@ __STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t Exter */ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_EXTEN)); +#endif +} + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC group regular sequencer configuration flexibility. + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @param Configurability This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerConfigurable(ADC_TypeDef *ADCx, uint32_t Configurability) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD, Configurability); +} + +/** + * @brief Get ADC group regular sequencer configuration flexibility. + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" are + * available: + * - sequencer configured to fully configurable: + * sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerLength(). + * - sequencer configured to not fully configurable: + * sequencer length and each rank affectation to a channel + * are fixed by channel HW number. + * Refer to description of function + * @ref LL_ADC_REG_SetSequencerChannels(). + * @rmtoll CFGR CHSELRMOD LL_ADC_REG_SetSequencerConfigurable + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_FIXED + * @arg @ref LL_ADC_REG_SEQ_CONFIGURABLE + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerConfigurable(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CHSELRMOD)); } +#endif /** * @brief Set ADC group regular sequencer length and scan direction. * @note Description of ADC group regular sequencer features: @@ -2822,13 +3617,30 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) * highest channel number). * Sequencer ranks are selected using * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * "LL_ADC_REG_SetSequencerScanDirection()". + * @note On devices STM32WB10xx, STM32WB15xx: after calling functions + * @ref LL_ADC_REG_SetSequencerLength() + * or @ref LL_ADC_REG_SetSequencerRanks(), + * it is mandatory to wait for the assertion of CCRDY flag + * using "LL_ADC_IsActiveFlag_CCRDY()". + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Refer to reference manual for more details. * @note Sequencer disabled is equivalent to sequencer of 1 rank: * ADC conversion on only 1 channel. * @note On this STM32 serie, setting of this feature is conditioned to * ADC state: * ADC must be disabled or enabled without conversion on going * on group regular. - * @rmtoll SQR1 L LL_ADC_REG_SetSequencerLength + * @rmtoll CHSELR SQ1 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_SetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_SetSequencerLength * @param ADCx ADC instance * @param SequencerNbRanks This parameter can be one of the following values: * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE @@ -2839,19 +3651,25 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t SequencerNbRanks) { +#if defined (ADC_SUPPORT_2_5_MSPS) + SET_BIT(ADCx->CHSELR, SequencerNbRanks); +#else MODIFY_REG(ADCx->SQR1, ADC_SQR1_L, SequencerNbRanks); +#endif } /** @@ -2881,9 +3699,18 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t S * highest channel number). * Sequencer ranks are selected using * function "LL_ADC_REG_SetSequencerChannels()". + * To set scan direction differently, refer to function + * "LL_ADC_REG_SetSequencerScanDirection()". * @note Sequencer disabled is equivalent to sequencer of 1 rank: * ADC conversion on only 1 channel. - * @rmtoll SQR1 L LL_ADC_REG_GetSequencerLength + * @rmtoll CHSELR SQ1 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ2 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ3 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ4 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ5 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ6 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ7 LL_ADC_REG_GetSequencerLength\n + * CHSELR SQ8 LL_ADC_REG_GetSequencerLength * @param ADCx ADC instance * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_REG_SEQ_SCAN_DISABLE @@ -2894,21 +3721,81 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerLength(ADC_TypeDef *ADCx, uint32_t S * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS - * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + __IO uint32_t ChannelsRanks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL); + uint32_t SequencerLength = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS; + uint32_t RankIndex; + + /* Parse register for end of sequence identifier */ + for(RankIndex = 0UL; RankIndex < (32U - 4U); RankIndex+=4U) + { + if((ChannelsRanks & (ADC_CHSELR_SQ2 << RankIndex)) == (ADC_CHSELR_SQ2 << RankIndex)) + { + SequencerLength = (ADC_CHSELR_SQ2 << RankIndex); + break; + } + } + + return SequencerLength; +#else return (uint32_t)(READ_BIT(ADCx->SQR1, ADC_SQR1_L)); +#endif +} + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC group regular sequencer scan direction. + * @note On this STM32 serie, parameter relevant only is sequencer is set + * to mode not fully configurable, + * refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). + * @note On some other STM32 families, this setting is not available and + * the default scan direction is forward. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection + * @param ADCx ADC instance + * @param ScanDirection This parameter can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection) +{ + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection); } /** + * @brief Get ADC group regular sequencer scan direction. + * @note On some other STM32 families, this setting is not available and + * the default scan direction is forward. + * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD + * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR)); +} + +#endif +/** * @brief Set ADC group regular sequencer discontinuous mode: * sequence subdivided and scan conversions interrupted every selected * number of ranks. @@ -2926,18 +3813,24 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx) * @param SeqDiscont This parameter can be one of the following values: * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK - * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM, SeqDiscont); +#endif } /** @@ -2950,17 +3843,23 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK - * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS - * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS + * @arg @ref LL_ADC_REG_SEQ_DISCONT_2RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_3RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_4RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_5RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_6RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_7RANKS (1) + * @arg @ref LL_ADC_REG_SEQ_DISCONT_8RANKS (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DISCEN | ADC_CFGR_DISCNUM)); +#endif } /** @@ -2979,6 +3878,14 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) * TempSensor, ...), measurement paths to internal channels must be * enabled separately. * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On devices STM32WB10xx, STM32WB15xx: after calling functions + * @ref LL_ADC_REG_SetSequencerLength() + * or @ref LL_ADC_REG_SetSequencerRanks(), + * it is mandatory to wait for the assertion of CCRDY flag + * using "LL_ADC_IsActiveFlag_CCRDY()". + * Otherwise, performing some actions (configuration update, + * ADC conversion start, ... ) will be ignored. + * Refer to reference manual for more details. * @note On this STM32 serie, setting of this feature is conditioned to * ADC state: * ADC must be disabled or enabled without conversion on going @@ -3009,14 +3916,16 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_REG_RANK_6 * @arg @ref LL_ADC_REG_RANK_7 * @arg @ref LL_ADC_REG_RANK_8 - * @arg @ref LL_ADC_REG_RANK_9 - * @arg @ref LL_ADC_REG_RANK_10 - * @arg @ref LL_ADC_REG_RANK_11 - * @arg @ref LL_ADC_REG_RANK_12 - * @arg @ref LL_ADC_REG_RANK_13 - * @arg @ref LL_ADC_REG_RANK_14 - * @arg @ref LL_ADC_REG_RANK_15 - * @arg @ref LL_ADC_REG_RANK_16 + * @arg @ref LL_ADC_REG_RANK_9 (1) + * @arg @ref LL_ADC_REG_RANK_10 (1) + * @arg @ref LL_ADC_REG_RANK_11 (1) + * @arg @ref LL_ADC_REG_RANK_12 (1) + * @arg @ref LL_ADC_REG_RANK_13 (1) + * @arg @ref LL_ADC_REG_RANK_14 (1) + * @arg @ref LL_ADC_REG_RANK_15 (1) + * @arg @ref LL_ADC_REG_RANK_16 (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param Channel This parameter can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 * @arg @ref LL_ADC_CHANNEL_1 (7) @@ -3041,12 +3950,21 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval None */ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) { +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Set bits with content of parameter "Channel" with bits position */ + /* in register depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), + ((Channel & ADC_CHANNEL_ID_NUMBER_MASK_SEQ) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +#else /* Set bits with content of parameter "Channel" with bits position */ /* in register and register position depending on parameter "Rank". */ /* Parameters "Rank" and "Channel" are used with masks because containing */ @@ -3056,6 +3974,7 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra MODIFY_REG(*preg, ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK), ((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << (Rank & ADC_REG_RANK_ID_SQRX_MASK)); +#endif } /** @@ -3104,14 +4023,16 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_REG_RANK_6 * @arg @ref LL_ADC_REG_RANK_7 * @arg @ref LL_ADC_REG_RANK_8 - * @arg @ref LL_ADC_REG_RANK_9 - * @arg @ref LL_ADC_REG_RANK_10 - * @arg @ref LL_ADC_REG_RANK_11 - * @arg @ref LL_ADC_REG_RANK_12 - * @arg @ref LL_ADC_REG_RANK_13 - * @arg @ref LL_ADC_REG_RANK_14 - * @arg @ref LL_ADC_REG_RANK_15 - * @arg @ref LL_ADC_REG_RANK_16 + * @arg @ref LL_ADC_REG_RANK_9 (1) + * @arg @ref LL_ADC_REG_RANK_10 (1) + * @arg @ref LL_ADC_REG_RANK_11 (1) + * @arg @ref LL_ADC_REG_RANK_12 (1) + * @arg @ref LL_ADC_REG_RANK_13 (1) + * @arg @ref LL_ADC_REG_RANK_14 (1) + * @arg @ref LL_ADC_REG_RANK_15 (1) + * @arg @ref LL_ADC_REG_RANK_16 (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 * @arg @ref LL_ADC_CHANNEL_1 (7) @@ -3136,7 +4057,7 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n * (4) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done @@ -3144,15 +4065,383 @@ __STATIC_INLINE void LL_ADC_REG_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra */ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t) ((READ_BIT(ADCx->CHSELR, + ADC_CHSELR_SQ1 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) + >> (Rank & ADC_REG_RANK_ID_SQRX_MASK) + ) << (ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ); +#else const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SQR1, ((Rank & ADC_REG_SQRX_REGOFFSET_MASK) >> ADC_SQRX_REGOFFSET_POS)); return (uint32_t)((READ_BIT(*preg, ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 << (Rank & ADC_REG_RANK_ID_SQRX_MASK)) >> (Rank & ADC_REG_RANK_ID_SQRX_MASK)) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS ); +#endif +} + +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by overwriting the current sequencer + * configuration. + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN1..5). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); } /** + * @brief Add channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by adding them to the current sequencer + * configuration. + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN1..5). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels ordering into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * - Set channels selected by removing them to the current sequencer + * configuration. + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN1..5). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be selected. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n + * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem + * @param ADCx ADC instance + * @param Channel This parameter can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + * @retval None + */ +__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK)); +} + +/** + * @brief Get ADC group regular sequence: channel on rank corresponding to + * channel number. + * @note This function performs: + * - Channels order reading into each rank of scan sequence: + * rank of each channel is fixed by channel HW number + * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + * @note On this STM32 serie, ADC group regular sequencer both modes + * "fully configurable" or "not fully configurable" + * are available, they can be chosen using + * function @ref LL_ADC_REG_SetSequencerConfigurable(). + * This function can be used with setting "not fully configurable". + * Refer to description of functions @ref LL_ADC_REG_SetSequencerConfigurable() + * and @ref LL_ADC_REG_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @note On this STM32 serie, to measure internal channels (VrefInt, + * TempSensor, ...), measurement paths to internal channels must be + * enabled separately. + * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs + * coming from GPIO pads (ADC_IN1..5). +*/ +//TBC +/* + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on group regular. + * @note One or several values can be retrieved. + * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...) + * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n + * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + */ +__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx) +{ + uint32_t ChannelsBitfield = READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL); + + return ( (((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17) + | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18) + ); +} +#endif +/** * @brief Set ADC continuous conversion mode on ADC group regular. * @note Description of ADC continuous conversion mode: * - single mode: one conversion per trigger @@ -3173,7 +4462,11 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerRanks(ADC_TypeDef *ADCx, uint32_ */ __STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_CONT, Continuous); +#endif } /** @@ -3190,7 +4483,11 @@ __STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Co */ __STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_CONT)); +#endif } /** @@ -3228,7 +4525,11 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_DMAEN | ADC_CFGR_DMACFG, DMATransfer); +#endif } /** @@ -3261,7 +4562,11 @@ __STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATr */ __STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_DMAEN | ADC_CFGR_DMACFG)); +#endif } @@ -3287,7 +4592,11 @@ __STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_OVRMOD, Overrun); +#endif } /** @@ -3301,13 +4610,20 @@ __STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun) */ __STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR, ADC_CFGR_OVRMOD)); +#endif } /** * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_LL_EF_Configuration_ADC_Group_Injected Configuration of ADC hierarchical scope: group injected * @{ */ @@ -3526,7 +4842,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx) * TempSensor, ...), measurement paths to internal channels must be * enabled separately. * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). - * @note On STM32WB, some fast channels are available: fast analog inputs + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs * coming from GPIO pads (ADC_IN1..5). * @note On this STM32 serie, setting of this feature is conditioned to * ADC state: @@ -3566,7 +4882,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetSequencerDiscont(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval None */ @@ -3631,7 +4947,7 @@ __STATIC_INLINE void LL_ADC_INJ_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Ra * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (4) * @arg @ref LL_ADC_CHANNEL_VBAT (4) * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)).\n * (4) For ADC channel read back from ADC register, * comparison with internal channel parameter to be done @@ -3776,7 +5092,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx) * TempSensor, ...), measurement paths to internal channels must be * enabled separately. * This can be done using function @ref LL_ADC_SetCommonPathInternalCh(). - * @note On STM32WB, some fast channels are available: fast analog inputs + * @note On STM32WB (except devices: STM32WB10xx, STM32WB15xx), some fast channels are available: fast analog inputs * coming from GPIO pads (ADC_IN1..5). * @note On this STM32 serie, setting of this feature is conditioned to * ADC state: @@ -3834,7 +5150,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @param Rank2_Channel This parameter can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 @@ -3860,7 +5176,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @param Rank3_Channel This parameter can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 @@ -3886,7 +5202,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @param Rank4_Channel This parameter can be one of the following values: * @arg @ref LL_ADC_CHANNEL_0 @@ -3912,7 +5228,7 @@ __STATIC_INLINE uint32_t LL_ADC_INJ_GetQueueMode(ADC_TypeDef *ADCx) * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval None */ @@ -3954,10 +5270,99 @@ __STATIC_INLINE void LL_ADC_INJ_ConfigQueueContext(ADC_TypeDef *ADCx, * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_LL_EF_Configuration_Channels Configuration of ADC hierarchical scope: channels * @{ */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Set sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note In case of internal channel (VrefInt, TempSensor, ...) to be + * converted: + * sampling time constraints must be respected (sampling time can be + * adjusted in function of ADC clock frequency and sampling time + * setting). + * Refer to device datasheet for timings values (parameters TS_vrefint, + * TS_temp, ...). + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 serie, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @note In case of ADC conversion of internal channel (VrefInt, + * temperature sensor, ...), a sampling time minimum value + * is required. + * Refer to device datasheet. + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be disabled or enabled without conversion on going + * on either groups regular or injected. + * @rmtoll SMPR1 SMP0 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP1 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP2 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP3 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP4 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP5 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP6 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP7 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP8 LL_ADC_SetChannelSamplingTime\n + * SMPR1 SMP9 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_SetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_SetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + * @param SamplingTimeY This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTimeY) +{ + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +} +#else /** * @brief Set sampling time of the selected ADC channel * Unit: ADC clock cycles. @@ -4028,7 +5433,7 @@ __STATIC_INLINE void LL_ADC_INJ_ConfigQueueContext(ADC_TypeDef *ADCx, * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @param SamplingTime This parameter can be one of the following values: * @arg @ref LL_ADC_SAMPLINGTIME_2CYCLES_5 @@ -4043,6 +5448,14 @@ __STATIC_INLINE void LL_ADC_INJ_ConfigQueueContext(ADC_TypeDef *ADCx, */ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SamplingTime) { +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Parameter "Channel" is used with masks because containing */ + /* other bits reserved for other purpose. */ + MODIFY_REG(ADCx->SMPR, + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS), + (Channel << ADC_SMPR_SMPSEL0_BITOFFSET_POS) & (SamplingTimeY & ADC_SAMPLING_TIME_CH_MASK) + ); +#else /* Set bits with content of parameter "SamplingTime" with bits position */ /* in register and register position depending on parameter "Channel". */ /* Parameter "Channel" is used with masks because containing */ @@ -4052,8 +5465,11 @@ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t C MODIFY_REG(*preg, ADC_SMPR1_SMP0 << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS), SamplingTime << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS)); +#endif } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) /** * @brief Get sampling time of the selected ADC channel * Unit: ADC clock cycles. @@ -4109,7 +5525,82 @@ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t C * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR * @arg @ref LL_ADC_CHANNEL_VBAT * - * (7) On STM32WB, fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). + * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_1 + * @arg @ref LL_ADC_SAMPLINGTIME_COMMON_2 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) +{ + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ADC_SMPR_SMPSEL0_BITOFFSET_POS) & 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return( (~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2) ); +} +#else +/** + * @brief Get sampling time of the selected ADC channel + * Unit: ADC clock cycles. + * @note On this device, sampling time is on channel scope: independently + * of channel mapped on ADC group regular or injected. + * @note Conversion time is the addition of sampling time and processing time. + * On this STM32 serie, ADC processing time is: + * - 12.5 ADC clock cycles at ADC resolution 12 bits + * - 10.5 ADC clock cycles at ADC resolution 10 bits + * - 8.5 ADC clock cycles at ADC resolution 8 bits + * - 6.5 ADC clock cycles at ADC resolution 6 bits + * @rmtoll SMPR1 SMP0 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP1 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP2 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP3 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP4 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP5 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP6 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP7 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP8 LL_ADC_GetChannelSamplingTime\n + * SMPR1 SMP9 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP10 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP11 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP12 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP13 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP14 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP15 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP16 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP17 LL_ADC_GetChannelSamplingTime\n + * SMPR2 SMP18 LL_ADC_GetChannelSamplingTime + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_0 + * @arg @ref LL_ADC_CHANNEL_1 (7) + * @arg @ref LL_ADC_CHANNEL_2 (7) + * @arg @ref LL_ADC_CHANNEL_3 (7) + * @arg @ref LL_ADC_CHANNEL_4 (7) + * @arg @ref LL_ADC_CHANNEL_5 (7) + * @arg @ref LL_ADC_CHANNEL_6 + * @arg @ref LL_ADC_CHANNEL_7 + * @arg @ref LL_ADC_CHANNEL_8 + * @arg @ref LL_ADC_CHANNEL_9 + * @arg @ref LL_ADC_CHANNEL_10 + * @arg @ref LL_ADC_CHANNEL_11 + * @arg @ref LL_ADC_CHANNEL_12 + * @arg @ref LL_ADC_CHANNEL_13 + * @arg @ref LL_ADC_CHANNEL_14 + * @arg @ref LL_ADC_CHANNEL_15 + * @arg @ref LL_ADC_CHANNEL_16 + * @arg @ref LL_ADC_CHANNEL_17 + * @arg @ref LL_ADC_CHANNEL_18 + * @arg @ref LL_ADC_CHANNEL_VREFINT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @arg @ref LL_ADC_CHANNEL_VBAT + * + * (7) On STM32WB devices (except devices: STM32WB10xx, STM32WB15xx) fast channel (0.188 us for 12-bit resolution (ADC conversion rate up to 5.33 Ms/s)). * Other channels are slow channels (0.238 us for 12-bit resolution (ADC conversion rate up to 4.21 Ms/s)). * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_SAMPLINGTIME_2CYCLES_5 @@ -4123,14 +5614,31 @@ __STATIC_INLINE void LL_ADC_SetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t C */ __STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32_t Channel) { +#if defined (ADC_SUPPORT_2_5_MSPS) + __IO uint32_t smpr = READ_REG(ADCx->SMPR); + + /* Retrieve sampling time bit corresponding to the selected channel */ + /* and shift it to position 0. */ + uint32_t smp_channel_posbit0 = ((smpr & ADC_SAMPLING_TIME_CH_MASK) + >> ((((Channel & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) + ADC_SMPR_SMPSEL0_BITOFFSET_POS) & 0x1FUL)); + + /* Select sampling time bitfield depending on sampling time bit value 0 or 1. */ + return( (~(smp_channel_posbit0) * LL_ADC_SAMPLINGTIME_COMMON_1) + | (smp_channel_posbit0 * LL_ADC_SAMPLINGTIME_COMMON_2) ); +#else const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SMPR1, ((Channel & ADC_CHANNEL_SMPRX_REGOFFSET_MASK) >> ADC_SMPRX_REGOFFSET_POS)); return (uint32_t)(READ_BIT(*preg, ADC_SMPR1_SMP0 << ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS)) >> ((Channel & ADC_CHANNEL_SMPx_BITOFFSET_MASK) >> ADC_CHANNEL_SMPx_BITOFFSET_POS) ); +#endif } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC channel differential mode" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Set mode single-ended or differential input of the selected * ADC channel. @@ -4234,6 +5742,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetChannelSingleDiff(ADC_TypeDef *ADCx, uint32_t return (uint32_t)(READ_BIT(ADCx->DIFSEL, (Channel & ADC_SINGLEDIFF_CHANNEL_MASK))); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ @@ -4290,80 +5799,89 @@ __STATIC_INLINE uint32_t LL_ADC_GetChannelSingleDiff(ADC_TypeDef *ADCx, uint32_t * @param AWDChannelGroup This parameter can be one of the following values: * @arg @ref LL_ADC_AWD_DISABLE * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0)(1) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_VREFINT_REG (0) - * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0) - * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VREFINT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VREFINT_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG (0) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0) - * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG_INJ (1) * @arg @ref LL_ADC_AWD_CH_VBAT_REG (0) - * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0) - * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ + * @arg @ref LL_ADC_AWD_CH_VBAT_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CH_VBAT_REG_INJ (1) * * (0) On STM32WB, parameter available only on analog watchdog number: AWD1. + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDChannelGroup) { +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + + MODIFY_REG(ADCx->CFGR1, + (LL_ADC_AWD1 & ADC_AWD_CR_ALL_CHANNEL_MASK), + AWDChannelGroup & LL_ADC_AWD1); +#else /* Set bits with content of parameter "AWDChannelGroup" with bits position */ /* in register and register position depending on parameter "AWDy". */ /* Parameters "AWDChannelGroup" and "AWDy" are used with masks because */ @@ -4374,6 +5892,7 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t MODIFY_REG(*preg, (AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK), AWDChannelGroup & AWDy); +#endif } /** @@ -4425,81 +5944,113 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 - * @arg @ref LL_ADC_AWD2 (1) - * @arg @ref LL_ADC_AWD3 (1) + * @arg @ref LL_ADC_AWD2 (1)(2) + * @arg @ref LL_ADC_AWD3 (1)(2) * * (1) On this AWD number, monitored channel can be retrieved * if only 1 channel is programmed (or none or all channels). * This function cannot retrieve monitored channel if * multiple channels are programmed simultaneously * by bitfield. + * (2) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_AWD_DISABLE * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0) - * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_INJ (0)(1) + * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_0_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_0_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_0_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_1_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_1_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_1_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_2_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_2_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_2_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_3_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_3_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_3_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_4_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_4_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_4_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_5_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_5_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_5_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_6_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_6_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_6_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_7_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_7_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_7_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_8_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_8_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_8_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_9_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_9_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_9_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_10_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_10_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_10_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_11_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_11_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_11_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_12_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_12_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_12_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_13_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_13_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_13_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_14_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_14_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_14_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_15_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_15_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_15_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_16_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_16_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_16_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_17_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_17_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_17_REG_INJ (1) * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0) - * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ + * @arg @ref LL_ADC_AWD_CHANNEL_18_INJ (0)(1) + * @arg @ref LL_ADC_AWD_CHANNEL_18_REG_INJ (1) * * (0) On STM32WB, parameter available only on analog watchdog number: AWD1. + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDy) { +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + + uint32_t AnalogWDMonitChannels = (READ_BIT(ADCx->CFGR1, LL_ADC_AWD1) & LL_ADC_AWD1 & ADC_AWD_CR_ALL_CHANNEL_MASK); + + /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled */ + /* (parameter value LL_ADC_AWD_DISABLE). */ + /* Else, the selected AWD is enabled and is monitoring a group of channels */ + /* or a single channel. */ + if(AnalogWDMonitChannels != 0UL) + { + if((AnalogWDMonitChannels & ADC_CFGR1_AWD1SGL) == 0UL) + { + /* AWD monitoring a group of channels */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + & (~(ADC_CFGR1_AWD1CH)) + ); + } + else + { + /* AWD monitoring a single channel */ + AnalogWDMonitChannels = (AnalogWDMonitChannels + | (0x01UL << (AnalogWDMonitChannels >> ADC_CFGR1_AWD1CH_Pos)) + ); + } + } + + return AnalogWDMonitChannels; +#else const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS) + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL)); @@ -4552,6 +6103,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint } return AnalogWDMonitChannels; +#endif } /** @@ -4600,8 +6152,10 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 - * @arg @ref LL_ADC_AWD2 - * @arg @ref LL_ADC_AWD3 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF * @retval None @@ -4614,11 +6168,20 @@ __STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t /* "AWDy". */ /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ /* containing other bits reserved for other purpose. */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + + MODIFY_REG(ADCx->TR1, + ADC_TR1_HT1 | ADC_TR1_LT1, + (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +#else __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); MODIFY_REG(*preg, ADC_TR1_HT1 | ADC_TR1_LT1, (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); +#endif } /** @@ -4667,8 +6230,10 @@ __STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 - * @arg @ref LL_ADC_AWD2 - * @arg @ref LL_ADC_AWD3 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param AWDThresholdsHighLow This parameter can be one of the following values: * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH * @arg @ref LL_ADC_AWD_THRESHOLD_LOW @@ -4683,11 +6248,20 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AW /* "AWDThresholdsHighLow" and "AWDy". */ /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ /* containing other bits reserved for other purpose. */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + + MODIFY_REG(ADCx->TR1, + AWDThresholdsHighLow, + AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +#else __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); MODIFY_REG(*preg, AWDThresholdsHighLow, AWDThresholdValue << ((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4)); +#endif } /** @@ -4710,8 +6284,10 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AW * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 - * @arg @ref LL_ADC_AWD2 - * @arg @ref LL_ADC_AWD3 + * @arg @ref LL_ADC_AWD2 (1) + * @arg @ref LL_ADC_AWD3 (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param AWDThresholdsHighLow This parameter can be one of the following values: * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH * @arg @ref LL_ADC_AWD_THRESHOLD_LOW @@ -4720,18 +6296,31 @@ __STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AW */ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDy, uint32_t AWDThresholdsHighLow) { +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Prevent unused argument(s) compilation warning */ + (void)(AWDy); + + return (uint32_t)(READ_BIT(ADCx->TR1, + (AWDThresholdsHighLow | ADC_TR1_LT1)) + >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) & ~(AWDThresholdsHighLow & ADC_TR1_LT1)) + ); +#else const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, ((AWDy & ADC_AWD_TRX_REGOFFSET_MASK) >> ADC_AWD_TRX_REGOFFSET_POS)); return (uint32_t)(READ_BIT(*preg, (AWDThresholdsHighLow | ADC_TR1_LT1)) >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) & ~(AWDThresholdsHighLow & ADC_TR1_LT1)) ); +#endif } /** * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC oversampling" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_LL_EF_Configuration_ADC_oversampling Configuration of ADC transversal scope: oversampling * @{ */ @@ -4756,14 +6345,20 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_ * @param OvsScope This parameter can be one of the following values: * @arg @ref LL_ADC_OVS_DISABLE * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED - * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED - * @arg @ref LL_ADC_OVS_GRP_INJECTED - * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED + * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED (1) + * @arg @ref LL_ADC_OVS_GRP_INJECTED (1) + * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval None */ __STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t OvsScope) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_OVSE, OvsScope); +#else MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSM, OvsScope); +#endif } /** @@ -4782,13 +6377,19 @@ __STATIC_INLINE void LL_ADC_SetOverSamplingScope(ADC_TypeDef *ADCx, uint32_t Ovs * @retval Returned value can be one of the following values: * @arg @ref LL_ADC_OVS_DISABLE * @arg @ref LL_ADC_OVS_GRP_REGULAR_CONTINUED - * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED - * @arg @ref LL_ADC_OVS_GRP_INJECTED - * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED + * @arg @ref LL_ADC_OVS_GRP_REGULAR_RESUMED (1) + * @arg @ref LL_ADC_OVS_GRP_INJECTED (1) + * @arg @ref LL_ADC_OVS_GRP_INJ_REG_RESUMED (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_OVSE)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_ROVSE | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSM)); +#endif } /** @@ -4815,7 +6416,11 @@ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingScope(ADC_TypeDef *ADCx) */ __STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t OverSamplingDiscont) { +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TOVS, OverSamplingDiscont); +#else MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_TROVS, OverSamplingDiscont); +#endif } /** @@ -4834,7 +6439,11 @@ __STATIC_INLINE void LL_ADC_SetOverSamplingDiscont(ADC_TypeDef *ADCx, uint32_t O */ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingDiscont(ADC_TypeDef *ADCx) { +#if defined (ADC_SUPPORT_2_5_MSPS) + return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TOVS)); +#else return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_TROVS)); +#endif } /** @@ -4921,10 +6530,14 @@ __STATIC_INLINE uint32_t LL_ADC_GetOverSamplingShift(ADC_TypeDef *ADCx) * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC deep power down" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Put ADC instance in deep power down state. * @note In case of ADC calibration necessary: When ADC is in deep-power-down @@ -4979,6 +6592,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsDeepPowerDownEnabled(ADC_TypeDef *ADCx) { return ((READ_BIT(ADCx->CR, ADC_CR_DEEPPWD) == (ADC_CR_DEEPPWD)) ? 1UL : 0UL); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Enable ADC instance internal voltage regulator. @@ -5100,6 +6714,37 @@ __STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS)) ? 1UL : 0UL); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/** + * @brief Start ADC calibration in the mode single-ended + * or differential (for devices with differential mode available). + * @note On this STM32 serie, a minimum number of ADC clock cycles + * are required between ADC end of calibration and ADC enable. + * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES. + * @note For devices with differential mode available: + * Calibration of offset is specific to each of + * single-ended and differential modes + * (calibration run must be performed for each of these + * differential modes, if used afterwards and if the application + * requires their calibration). + * @note On this STM32 serie, setting of this feature is conditioned to + * ADC state: + * ADC must be ADC disabled. + * @rmtoll CR ADCAL LL_ADC_StartCalibration\n + * CR ADCALDIF LL_ADC_StartCalibration + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + /* Note: Write register with some additional bits forced to state reset */ + /* instead of modifying only the selected bit for this function, */ + /* to not interfere with bits with HW property "rs". */ + MODIFY_REG(ADCx->CR, + ADC_CR_BITS_PROPERTY_RS, + ADC_CR_ADCAL); +} +#else /** * @brief Start ADC calibration in the mode single-ended * or differential (for devices with differential mode available). @@ -5132,6 +6777,7 @@ __STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx, uint32_t SingleD ADC_CR_ADCALDIF | ADC_CR_BITS_PROPERTY_RS, ADC_CR_ADCAL | (SingleDiff & ADC_SINGLEDIFF_CALIB_START_MASK)); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Get ADC calibration state. @@ -5300,6 +6946,9 @@ __STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx) * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADC_LL_EF_Operation_ADC_Group_Injected Operation on ADC hierarchical scope: group injected * @{ */ @@ -5512,6 +7161,7 @@ __STATIC_INLINE uint8_t LL_ADC_INJ_ReadConversionData6(ADC_TypeDef *ADCx, uint32 * @} */ +#endif /* ADC_SUPPORT_2_5_MSPS */ /** @defgroup ADC_LL_EF_FLAG_Management ADC flag management * @{ */ @@ -5530,6 +7180,23 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY)) ? 1UL : 0UL); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Get flag ADC channel configuration ready. + * @note Duration of ADC channel configuration ready: CCRDY handshake + * requires 1APB + 2 ADC + 3 APB cycles after the channel configuration + * has been changed. + * @rmtoll ISR CCRDY LL_ADC_IsActiveFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +#else +#endif /** * @brief Get flag ADC group regular end of unitary conversion. * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC @@ -5574,6 +7241,9 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP)) ? 1UL : 0UL); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Get flag ADC group injected end of unitary conversion. * @rmtoll ISR JEOC LL_ADC_IsActiveFlag_JEOC @@ -5607,6 +7277,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JQOVF(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_JQOVF) == (LL_ADC_FLAG_JQOVF)) ? 1UL : 0UL); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Get flag ADC analog watchdog 1 flag * @rmtoll ISR AWD1 LL_ADC_IsActiveFlag_AWD1 @@ -5640,6 +7311,19 @@ __STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD3(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD3) == (LL_ADC_FLAG_AWD3)) ? 1UL : 0UL); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Get flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_IsActiveFlag_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOCAL) == (LL_ADC_FLAG_EOCAL)) ? 1UL : 0UL); +} + +#endif /** * @brief Clear flag ADC ready. * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC @@ -5654,6 +7338,20 @@ __STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx) WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Clear flag ADC channel configuration ready. + * @rmtoll ISR CCRDY LL_ADC_ClearFlag_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_ClearFlag_CCRDY(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_CCRDY); +} + +#else +#endif /** * @brief Clear flag ADC group regular end of unitary conversion. * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC @@ -5698,6 +7396,9 @@ __STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx) WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Clear flag ADC group injected end of unitary conversion. * @rmtoll ISR JEOC LL_ADC_ClearFlag_JEOC @@ -5731,6 +7432,7 @@ __STATIC_INLINE void LL_ADC_ClearFlag_JQOVF(ADC_TypeDef *ADCx) WRITE_REG(ADCx->ISR, LL_ADC_FLAG_JQOVF); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Clear flag ADC analog watchdog 1. * @rmtoll ISR AWD1 LL_ADC_ClearFlag_AWD1 @@ -5764,6 +7466,19 @@ __STATIC_INLINE void LL_ADC_ClearFlag_AWD3(ADC_TypeDef *ADCx) WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD3); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Clear flag ADC end of calibration. + * @rmtoll ISR EOCAL LL_ADC_ClearFlag_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOCAL(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOCAL); +} + +#endif /** * @} */ @@ -5783,6 +7498,20 @@ __STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx) SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Enable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_EnableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_EnableIT_CCRDY(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +#else +#endif /** * @brief Enable interruption ADC group regular end of unitary conversion. * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC @@ -5827,6 +7556,9 @@ __STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx) SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Enable interruption ADC group injected end of unitary conversion. * @rmtoll IER JEOCIE LL_ADC_EnableIT_JEOC @@ -5860,6 +7592,7 @@ __STATIC_INLINE void LL_ADC_EnableIT_JQOVF(ADC_TypeDef *ADCx) SET_BIT(ADCx->IER, LL_ADC_IT_JQOVF); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Enable interruption ADC analog watchdog 1. * @rmtoll IER AWD1IE LL_ADC_EnableIT_AWD1 @@ -5893,6 +7626,19 @@ __STATIC_INLINE void LL_ADC_EnableIT_AWD3(ADC_TypeDef *ADCx) SET_BIT(ADCx->IER, LL_ADC_IT_AWD3); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Enable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_EnableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOCAL(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +#endif /** * @brief Disable interruption ADC ready. * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY @@ -5904,6 +7650,20 @@ __STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx) CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Disable interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_DisableIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE void LL_ADC_DisableIT_CCRDY(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY); +} + +#else +#endif /** * @brief Disable interruption ADC group regular end of unitary conversion. * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC @@ -5948,6 +7708,9 @@ __STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx) CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Disable interruption ADC group regular end of unitary conversion. * @rmtoll IER JEOCIE LL_ADC_DisableIT_JEOC @@ -5981,6 +7744,7 @@ __STATIC_INLINE void LL_ADC_DisableIT_JQOVF(ADC_TypeDef *ADCx) CLEAR_BIT(ADCx->IER, LL_ADC_IT_JQOVF); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Disable interruption ADC analog watchdog 1. * @rmtoll IER AWD1IE LL_ADC_DisableIT_AWD1 @@ -6014,6 +7778,19 @@ __STATIC_INLINE void LL_ADC_DisableIT_AWD3(ADC_TypeDef *ADCx) CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD3); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Disable interruption ADC end of calibration. + * @rmtoll IER EOCALIE LL_ADC_DisableIT_EOCAL + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOCAL(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOCAL); +} + +#endif /** * @brief Get state of interruption ADC ready * (0: interrupt disabled, 1: interrupt enabled). @@ -6026,6 +7803,20 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY)) ? 1UL : 0UL); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Get state of interruption ADC channel configuration ready. + * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_CCRDY + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_CCRDY(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_FLAG_CCRDY) == (LL_ADC_FLAG_CCRDY)) ? 1UL : 0UL); +} + +#else +#endif /** * @brief Get state of interruption ADC group regular end of unitary conversion * (0: interrupt disabled, 1: interrupt enabled). @@ -6074,6 +7865,9 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP)) ? 1UL : 0UL); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Get state of interruption ADC group injected end of unitary conversion * (0: interrupt disabled, 1: interrupt enabled). @@ -6110,6 +7904,7 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JQOVF(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->IER, LL_ADC_IT_JQOVF) == (LL_ADC_IT_JQOVF)) ? 1UL : 0UL); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Get state of interruption ADC analog watchdog 1 * (0: interrupt disabled, 1: interrupt enabled). @@ -6146,6 +7941,20 @@ __STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD3(ADC_TypeDef *ADCx) return ((READ_BIT(ADCx->IER, LL_ADC_IT_AWD3) == (LL_ADC_IT_AWD3)) ? 1UL : 0UL); } +#if defined(ADC_SUPPORT_2_5_MSPS) +/** + * @brief Get state of interruption ADC end of calibration + * (0: interrupt disabled, 1: interrupt enabled). + * @rmtoll IER EOCALIE LL_ADC_IsEnabledIT_EOCAL + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOCAL(ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IER, LL_ADC_IT_EOCAL) == (LL_ADC_IT_EOCAL)) ? 1UL : 0UL); +} + +#endif /** * @} */ @@ -6172,10 +7981,14 @@ void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct); ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct); +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* Initialization of some features of ADC instance and ADC group injected */ ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct); void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct); +#endif /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h index 09b3d153dc..98e2b5d9fb 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h @@ -101,7 +101,9 @@ extern "C" { #endif #define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN #define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN +#if defined(ADC_SUPPORT_5_MSPS) #define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN +#endif #if defined(AES1) #define LL_AHB2_GRP1_PERIPH_AES1 RCC_AHB2ENR_AES1EN #endif @@ -173,12 +175,19 @@ extern "C" { * @{ */ #define LL_APB2_GRP1_PERIPH_ALL (0xFFFFFFFFU) - + +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2ENR_ADCEN +#endif #define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#if defined(TIM16) #define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#endif +#if defined(TIM17) #define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#endif #if defined(SAI1) #define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN #endif @@ -225,7 +234,9 @@ extern "C" { #endif #define LL_C2_AHB2_GRP1_PERIPH_GPIOE RCC_C2AHB2ENR_GPIOEEN #define LL_C2_AHB2_GRP1_PERIPH_GPIOH RCC_C2AHB2ENR_GPIOHEN +#if defined(ADC_SUPPORT_5_MSPS) #define LL_C2_AHB2_GRP1_PERIPH_ADC RCC_C2AHB2ENR_ADCEN +#endif #if defined(AES1) #define LL_C2_AHB2_GRP1_PERIPH_AES1 RCC_C2AHB2ENR_AES1EN #endif @@ -287,11 +298,18 @@ extern "C" { /** @defgroup BUS_LL_EC_C2_APB2_GRP1_PERIPH C2 APB2 GRP1 PERIPH * @{ */ +#if defined(ADC_SUPPORT_2_5_MSPS) +#define LL_C2_APB2_GRP1_PERIPH_ADC RCC_C2APB2ENR_ADCEN +#endif #define LL_C2_APB2_GRP1_PERIPH_TIM1 RCC_C2APB2ENR_TIM1EN #define LL_C2_APB2_GRP1_PERIPH_SPI1 RCC_C2APB2ENR_SPI1EN #define LL_C2_APB2_GRP1_PERIPH_USART1 RCC_C2APB2ENR_USART1EN +#if defined(TIM16) #define LL_C2_APB2_GRP1_PERIPH_TIM16 RCC_C2APB2ENR_TIM16EN +#endif +#if defined(TIM17) #define LL_C2_APB2_GRP1_PERIPH_TIM17 RCC_C2APB2ENR_TIM17EN +#endif #if defined(SAI1) #define LL_C2_APB2_GRP1_PERIPH_SAI1 RCC_C2APB2ENR_SAI1EN #endif @@ -304,7 +322,9 @@ extern "C" { * @{ */ #define LL_C2_APB3_GRP1_PERIPH_BLE RCC_C2APB3ENR_BLEEN +#if defined(RCC_802_SUPPORT) #define LL_C2_APB3_GRP1_PERIPH_802 RCC_C2APB3ENR_802EN +#endif /** * @} */ @@ -335,12 +355,13 @@ extern "C" { * AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -359,12 +380,13 @@ __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) * AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->AHB1ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -379,12 +401,13 @@ __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) * AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1ENR, Periphs); @@ -400,12 +423,13 @@ __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_ALL * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB1RSTR, Periphs); @@ -421,12 +445,13 @@ __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_ALL * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1RSTR, Periphs); @@ -442,13 +467,14 @@ __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) * AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -468,13 +494,14 @@ __STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) * AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->AHB1SMENR, Periphs); @@ -502,13 +529,14 @@ __STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -532,13 +560,14 @@ __STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->AHB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -558,13 +587,14 @@ __STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2ENR, Periphs); @@ -585,13 +615,14 @@ __STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB2RSTR, Periphs); @@ -612,13 +643,14 @@ __STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2RSTR, Periphs); @@ -638,13 +670,14 @@ __STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -668,13 +701,14 @@ __STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->AHB2SMENR, Periphs); @@ -698,15 +732,16 @@ __STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) * AHB3ENR IPCCEN LL_AHB3_GRP1_EnableClock\n * AHB3ENR FLASHEN LL_AHB3_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_HSEM * @arg @ref LL_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -726,15 +761,16 @@ __STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) * AHB3ENR IPCCEN LL_AHB3_GRP1_IsEnabledClock\n * AHB3ENR FLASHEN LL_AHB3_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_HSEM * @arg @ref LL_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->AHB3ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -750,15 +786,16 @@ __STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) * AHB3ENR IPCCEN LL_AHB3_GRP1_DisableClock\n * AHB3ENR FLASHEN LL_AHB3_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_HSEM * @arg @ref LL_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3ENR, Periphs); @@ -775,15 +812,16 @@ __STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) * AHB3RSTR FLASHRST LL_AHB3_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB3_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_HSEM * @arg @ref LL_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->AHB3RSTR, Periphs); @@ -800,15 +838,16 @@ __STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) * AHB3RSTR FLASHRST LL_AHB3_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_AHB2_GRP1_PERIPH_ALL - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_HSEM * @arg @ref LL_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3RSTR, Periphs); @@ -823,14 +862,15 @@ __STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) * AHB3SMENR SRAM2SMEN LL_AHB3_GRP1_EnableClockSleep\n * AHB3SMENR FLASHSMEN LL_AHB3_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_SRAM2 + * @note (*) Not supported by all the devices * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -849,14 +889,15 @@ __STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) * AHB3SMENR SRAM2SMEN LL_AHB3_GRP1_DisableClockSleep\n * AHB3SMENR FLASHSMEN LL_AHB3_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI + * @arg @ref LL_AHB3_GRP1_PERIPH_QUADSPI (*) * @arg @ref LL_AHB3_GRP1_PERIPH_PKA * @arg @ref LL_AHB3_GRP1_PERIPH_AES2 * @arg @ref LL_AHB3_GRP1_PERIPH_RNG * @arg @ref LL_AHB3_GRP1_PERIPH_SRAM2 * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->AHB3SMENR, Periphs); @@ -884,17 +925,18 @@ __STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -909,10 +951,11 @@ __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n * APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -936,17 +979,18 @@ __STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->APB1ENR1, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -957,10 +1001,11 @@ __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n * APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->APB1ENR2, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -979,17 +1024,18 @@ __STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_ (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->APB1ENR1, Periphs); @@ -1000,10 +1046,11 @@ __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n * APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->APB1ENR2, Periphs); @@ -1022,15 +1069,16 @@ __STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_ALL * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB1RSTR1, Periphs); @@ -1042,10 +1090,11 @@ __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP2_PERIPH_ALL - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB1RSTR2, Periphs); @@ -1064,15 +1113,16 @@ __STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_ALL * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB1RSTR1, Periphs); @@ -1084,10 +1134,11 @@ __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP2_PERIPH_ALL - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB1RSTR2, Periphs); @@ -1107,17 +1158,18 @@ __STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1132,10 +1184,11 @@ __STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockSleep\n * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1159,17 +1212,18 @@ __STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB * @arg @ref LL_APB1_GRP1_PERIPH_WWDG - * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_APB1_GRP1_PERIPH_USB + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->APB1SMENR1, Periphs); @@ -1180,10 +1234,11 @@ __STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockSleep\n * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->APB1SMENR2, Periphs); @@ -1199,21 +1254,24 @@ __STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) /** * @brief Enable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * @rmtoll APB2ENR ADCEN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1225,21 +1283,24 @@ __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) /** * @brief Check if APB2 peripheral clock is enabled or not - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * @rmtoll APB2ENR ADCEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -1247,21 +1308,24 @@ __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) /** * @brief Disable APB2 peripherals clock. - * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * @rmtoll APB2ENR ADCEN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->APB2ENR, Periphs); @@ -1269,7 +1333,8 @@ __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) /** * @brief Force APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * @rmtoll APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n @@ -1277,14 +1342,16 @@ __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB2RSTR, Periphs); @@ -1292,7 +1359,8 @@ __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) /** * @brief Release APB2 peripherals reset. - * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * @rmtoll APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n @@ -1300,14 +1368,16 @@ __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB2RSTR, Periphs); @@ -1315,21 +1385,24 @@ __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) /** * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. - * @rmtoll APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockSleep\n + * @rmtoll APB2SMENR ADCSMEN LL_APB2_GRP1_EnableClockSleep\n + * APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockSleep\n * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockSleep\n * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockSleep\n * APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockSleep\n * APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockSleep\n * APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1341,21 +1414,24 @@ __STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) /** * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. - * @rmtoll APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockSleep\n + * @rmtoll APB2SMENR ADCSMEN LL_APB2_GRP1_DisableClockSleep\n + * APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockSleep\n * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockSleep\n * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockSleep\n * APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockSleep\n * APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockSleep\n * APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->APB2SMENR, Periphs); @@ -1375,7 +1451,7 @@ __STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB3_GRP1_PERIPH_RF * @retval None -*/ + */ __STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs) { SET_BIT(RCC->APB3RSTR, Periphs); @@ -1387,7 +1463,7 @@ __STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_APB3_GRP1_PERIPH_RF * @retval None -*/ + */ __STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs) { CLEAR_BIT(RCC->APB3RSTR, Periphs); @@ -1410,13 +1486,14 @@ __STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs) * C2AHB1ENR TSCEN LL_C2_AHB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_C2_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs) { @@ -1437,13 +1514,14 @@ __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs) * C2AHB1ENR TSCEN LL_C2_AHB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_C2_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) { @@ -1460,13 +1538,14 @@ __STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) * C2AHB1ENR TSCEN LL_C2_AHB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_C2_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs) { @@ -1483,13 +1562,14 @@ __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs) * C2AHB1SMENR TSCSMEN LL_C2_AHB1_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_C2_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) { @@ -1510,13 +1590,14 @@ __STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) * C2AHB1SMENR TSCSMEN LL_C2_AHB1_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA1 - * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMA2 (*) * @arg @ref LL_C2_AHB1_GRP1_PERIPH_DMAMUX1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_SRAM1 * @arg @ref LL_C2_AHB1_GRP1_PERIPH_CRC * @arg @ref LL_C2_AHB1_GRP1_PERIPH_TSC + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) { @@ -1545,13 +1626,14 @@ __STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1575,13 +1657,14 @@ __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2AHB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -1601,13 +1684,14 @@ __STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2AHB2ENR, Periphs); @@ -1627,13 +1711,14 @@ __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1657,13 +1742,14 @@ __STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOA * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOB * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOD (*) * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOE * @arg @ref LL_C2_AHB2_GRP1_PERIPH_GPIOH - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC - * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_ADC (*) + * @arg @ref LL_C2_AHB2_GRP1_PERIPH_AES1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2AHB2SMENR, Periphs); @@ -1693,7 +1779,7 @@ __STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) * @arg @ref LL_C2_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_C2_AHB3_GRP1_PERIPH_FLASH * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1719,7 +1805,7 @@ __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs) * @arg @ref LL_C2_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_C2_AHB3_GRP1_PERIPH_FLASH * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2AHB3ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -1741,7 +1827,7 @@ __STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) * @arg @ref LL_C2_AHB3_GRP1_PERIPH_IPCC * @arg @ref LL_C2_AHB3_GRP1_PERIPH_FLASH * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2AHB3ENR, Periphs); @@ -1761,7 +1847,7 @@ __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs) * @arg @ref LL_C2_AHB3_GRP1_PERIPH_SRAM2 * @arg @ref LL_C2_AHB3_GRP1_PERIPH_FLASH * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1785,7 +1871,7 @@ __STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) * @arg @ref LL_C2_AHB3_GRP1_PERIPH_SRAM2 * @arg @ref LL_C2_AHB3_GRP1_PERIPH_FLASH * @retval None -*/ + */ __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2AHB3SMENR, Periphs); @@ -1812,16 +1898,17 @@ __STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) * C2APB1ENR1 LPTIM1EN LL_C2_APB1_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_RTCAPB - * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB + * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1836,10 +1923,11 @@ __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs) * @rmtoll C2APB1ENR2 LPUART1EN LL_C2_APB1_GRP2_EnableClock\n * C2APB1ENR2 LPTIM2EN LL_C2_APB1_GRP2_EnableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1862,16 +1950,17 @@ __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs) * C2APB1ENR1 LPTIM1EN LL_C2_APB1_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_RTCAPB - * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB + * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2APB1ENR1, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -1882,10 +1971,11 @@ __STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs) * @rmtoll C2APB1ENR2 LPUART1EN LL_C2_APB1_GRP2_IsEnabledClock\n * C2APB1ENR2 LPTIM2EN LL_C2_APB1_GRP2_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2APB1ENR2, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -1904,16 +1994,17 @@ __STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs) * C2APB1ENR1 LPTIM1EN LL_C2_APB1_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_RTCAPB - * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB + * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB1ENR1, Periphs); @@ -1924,10 +2015,11 @@ __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs) * @rmtoll C2APB1ENR2 LPUART1EN LL_C2_APB1_GRP2_DisableClock\n * C2APB1ENR2 LPTIM2EN LL_C2_APB1_GRP2_DisableClock * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB1ENR2, Periphs); @@ -1946,16 +2038,17 @@ __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs) * C2APB1SMENR1 LPTIM1SMEN LL_C2_APB1_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_RTCAPB - * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB + * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1970,10 +2063,11 @@ __STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs) * @rmtoll C2APB1SMENR2 LPUART1SMEN LL_C2_APB1_GRP2_EnableClockSleep\n * C2APB1SMENR2 LPTIM2SMEN LL_C2_APB1_GRP2_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -1996,16 +2090,17 @@ __STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs) * C2APB1SMENR1 LPTIM1SMEN LL_C2_APB1_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB1_GRP1_PERIPH_TIM2 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD + * @arg @ref LL_C2_APB1_GRP1_PERIPH_LCD (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_RTCAPB - * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_C2_APB1_GRP1_PERIPH_SPI2 (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C1 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 - * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS - * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB + * @arg @ref LL_C2_APB1_GRP1_PERIPH_I2C3 (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_C2_APB1_GRP1_PERIPH_USB (*) * @arg @ref LL_C2_APB1_GRP1_PERIPH_LPTIM1 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB1SMENR1, Periphs); @@ -2016,10 +2111,11 @@ __STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs) * @rmtoll C2APB1SMENR2 LPUART1SMEN LL_C2_APB1_GRP2_DisableClockSleep\n * C2APB1SMENR2 LPTIM2SMEN LL_C2_APB1_GRP2_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: - * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPUART1 (*) * @arg @ref LL_C2_APB1_GRP2_PERIPH_LPTIM2 + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB1SMENR2, Periphs); @@ -2035,21 +2131,24 @@ __STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs) /** * @brief Enable C2APB2 peripherals clock. - * @rmtoll C2APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n + * @rmtoll C2APB2ENR ADCEN LL_C2_APB2_GRP1_EnableClock\n + * C2APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n * C2APB2ENR SPI1EN LL_C2_APB2_GRP1_EnableClock\n * C2APB2ENR USART1EN LL_C2_APB2_GRP1_EnableClock\n * C2APB2ENR TIM16EN LL_C2_APB2_GRP1_EnableClock\n * C2APB2ENR TIM17EN LL_C2_APB2_GRP1_EnableClock\n * C2APB2ENR SAI1EN LL_C2_APB2_GRP1_EnableClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_C2_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -2061,21 +2160,24 @@ __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs) /** * @brief Check if C2APB2 peripheral clock is enabled or not - * @rmtoll C2APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * @rmtoll C2APB2ENR ADCEN LL_C2_APB2_GRP1_IsEnabledClock\n + * C2APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n * C2APB2ENR SPI1EN LL_C2_APB2_GRP1_IsEnabledClock\n * C2APB2ENR USART1EN LL_C2_APB2_GRP1_IsEnabledClock\n * C2APB2ENR TIM16EN LL_C2_APB2_GRP1_IsEnabledClock\n * C2APB2ENR TIM17EN LL_C2_APB2_GRP1_IsEnabledClock\n * C2APB2ENR SAI1EN LL_C2_APB2_GRP1_IsEnabledClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_C2_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -2083,21 +2185,24 @@ __STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs) /** * @brief Disable C2APB2 peripherals clock. - * @rmtoll C2APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n + * @rmtoll C2APB2ENR ADCEN LL_C2_APB2_GRP1_DisableClock\n + * C2APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n * C2APB2ENR SPI1EN LL_C2_APB2_GRP1_DisableClock\n * C2APB2ENR USART1EN LL_C2_APB2_GRP1_DisableClock\n * C2APB2ENR TIM16EN LL_C2_APB2_GRP1_DisableClock\n * C2APB2ENR TIM17EN LL_C2_APB2_GRP1_DisableClock\n * C2APB2ENR SAI1EN LL_C2_APB2_GRP1_DisableClock * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_C2_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB2ENR, Periphs); @@ -2105,21 +2210,24 @@ __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs) /** * @brief Enable C2APB2 peripherals clock during Low Power (Sleep) mode. - * @rmtoll C2APB2SMENR TIM1SMEN LL_C2_APB2_GRP1_EnableClockSleep\n + * @rmtoll C2APB2SMENR ADCSMEN LL_C2_APB2_GRP1_EnableClockSleep\n + * C2APB2SMENR TIM1SMEN LL_C2_APB2_GRP1_EnableClockSleep\n * C2APB2SMENR SPI1SMEN LL_C2_APB2_GRP1_EnableClockSleep\n * C2APB2SMENR USART1SMEN LL_C2_APB2_GRP1_EnableClockSleep\n * C2APB2SMENR TIM16SMEN LL_C2_APB2_GRP1_EnableClockSleep\n * C2APB2SMENR TIM17SMEN LL_C2_APB2_GRP1_EnableClockSleep\n * C2APB2SMENR SAI1SMEN LL_C2_APB2_GRP1_EnableClockSleep * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_C2_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -2131,21 +2239,24 @@ __STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs) /** * @brief Disable C2APB2 peripherals clock during Low Power (Sleep) mode. - * @rmtoll C2APB2SMENR TIM1SMEN LL_C2_APB2_GRP1_DisableClockSleep\n + * @rmtoll C2APB2SMENR ADCSMEN LL_C2_APB2_GRP1_DisableClockSleep\n + * C2APB2SMENR TIM1SMEN LL_C2_APB2_GRP1_DisableClockSleep\n * C2APB2SMENR SPI1SMEN LL_C2_APB2_GRP1_DisableClockSleep\n * C2APB2SMENR USART1SMEN LL_C2_APB2_GRP1_DisableClockSleep\n * C2APB2SMENR TIM16SMEN LL_C2_APB2_GRP1_DisableClockSleep\n * C2APB2SMENR TIM17SMEN LL_C2_APB2_GRP1_DisableClockSleep\n * C2APB2SMENR SAI1SMEN LL_C2_APB2_GRP1_DisableClockSleep * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_C2_APB2_GRP1_PERIPH_ADC (*) * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_SPI1 * @arg @ref LL_C2_APB2_GRP1_PERIPH_USART1 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 - * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM16 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_C2_APB2_GRP1_PERIPH_SAI1 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB2SMENR, Periphs); @@ -2162,12 +2273,13 @@ __STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs) /** * @brief Enable C2APB3 peripherals clock. * @rmtoll C2APB3ENR BLEEN LL_C2_APB3_GRP1_EnableClock\n - * C2APB3ENR 802EN LL_C2_APB3_GRP1_EnableClock + * C2APB3ENR 802EN LL_C2_APB3_GRP1_EnableClock (*) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB3_GRP1_PERIPH_BLE - * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 + * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -2180,12 +2292,13 @@ __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs) /** * @brief Check if C2APB3 peripheral clock is enabled or not * @rmtoll C2APB3ENR BLEEN LL_C2_APB3_GRP1_IsEnabledClock\n - * C2APB3ENR 802EN LL_C2_APB3_GRP1_IsEnabledClock + * C2APB3ENR 802EN LL_C2_APB3_GRP1_IsEnabledClock (*) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB3_GRP1_PERIPH_BLE - * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 + * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 (*) + * @note (*) Not supported by all the devices * @retval uint32_t -*/ + */ __STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs) { return ((READ_BIT(RCC->C2APB3ENR, Periphs) == (Periphs)) ? 1UL : 0UL); @@ -2194,12 +2307,13 @@ __STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs) /** * @brief Disable C2APB3 peripherals clock. * @rmtoll C2APB3ENR BLEEN LL_C2_APB3_GRP1_DisableClock\n - * C2APB3ENR 802EN LL_C2_APB3_GRP1_DisableClock + * C2APB3ENR 802EN LL_C2_APB3_GRP1_DisableClock (*) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB3_GRP1_PERIPH_BLE - * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 + * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB3ENR, Periphs); @@ -2208,12 +2322,13 @@ __STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs) /** * @brief Enable C2APB3 peripherals clock during Low Power (Sleep) mode. * @rmtoll C2APB3SMENR BLESMEN LL_C2_APB3_GRP1_EnableClockSleep\n - * C2APB3SMENR 802SMEN LL_C2_APB3_GRP1_EnableClockSleep + * C2APB3SMENR 802SMEN LL_C2_APB3_GRP1_EnableClockSleep (*) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB3_GRP1_PERIPH_BLE - * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 + * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs) { __IO uint32_t tmpreg; @@ -2226,12 +2341,13 @@ __STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs) /** * @brief Disable C2APB3 peripherals clock during Low Power (Sleep) mode. * @rmtoll C2APB3SMENR BLESMEN LL_C2_APB3_GRP1_DisableClockSleep\n - * C2APB3SMENR 802SMEN LL_C2_APB3_GRP1_DisableClockSleep + * C2APB3SMENR 802SMEN LL_C2_APB3_GRP1_DisableClockSleep (*) * @param Periphs This parameter can be a combination of the following values: * @arg @ref LL_C2_APB3_GRP1_PERIPH_BLE - * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 + * @arg @ref LL_C2_APB3_GRP1_PERIPH_802 (*) + * @note (*) Not supported by all the devices * @retval None -*/ + */ __STATIC_INLINE void LL_C2_APB3_GRP1_DisableClockSleep(uint32_t Periphs) { CLEAR_BIT(RCC->C2APB3SMENR, Periphs); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h index 127db62ecb..52556fac78 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_comp.h @@ -138,7 +138,11 @@ typedef struct /** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection * @{ */ -#define LL_COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1 (except device STM32WB35xx), pin PB4 for COMP2) */ +#if defined(STM32WB15xx) || defined(STM32WB10xx) +/* LL_COMP_INPUT_PLUS_IO1 not available on this device */ +#else +#define LL_COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1 (except device STM32WB35xx), pin PB4 for COMP2). Note: On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ +#endif #define LL_COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */ #define LL_COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */ /** @@ -153,7 +157,11 @@ typedef struct #define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */ #define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */ #define LL_COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PA9 for COMP1, pin PB3 for COMP2) */ -#define LL_COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1 (except device STM32WB35xx), pin PB7 for COMP2) */ +#if defined(STM32WB15xx) || defined(STM32WB10xx) +/* LL_COMP_INPUT_MINUS_IO2 not available on this device */ +#else +#define LL_COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1 (except device STM32WB35xx), pin PB7 for COMP2). Note: On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. */ +#endif #define LL_COMP_INPUT_MINUS_IO3 ( COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */ #define LL_COMP_INPUT_MINUS_IO4 (COMP_CSR_INMESEL_1 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO4 (pin PA4 for COMP1, pin PA4 for COMP2) */ #define LL_COMP_INPUT_MINUS_IO5 (COMP_CSR_INMESEL_1 | COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO5 (pin PA5 for COMP1, pin PA5 for COMP2) */ @@ -307,7 +315,7 @@ typedef struct */ __STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode) { - /* Note: On this STM32 serie, window mode can be set only */ + /* Note: On this STM32 series, window mode can be set only */ /* from COMP instance: COMP2. */ MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WINMODE, WindowMode); } @@ -378,7 +386,7 @@ __STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx) * @note In case of comparator input selected to be connected to IO: * GPIO pins are specific to each comparator instance. * Refer to description of parameters or to reference manual. - * @note On this STM32 serie, scaler bridge is configurable: + * @note On this STM32 series, scaler bridge is configurable: * to optimize power consumption, this function enables the * voltage scaler bridge only when required * (when selecting comparator input based on VrefInt: VrefInt or @@ -464,7 +472,7 @@ __STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx) * @note In case of comparator input selected to be connected to IO: * GPIO pins are specific to each comparator instance. * Refer to description of parameters or to reference manual. - * @note On this STM32 serie, scaler bridge is configurable: + * @note On this STM32 series, scaler bridge is configurable: * to optimize power consumption, this function enables the * voltage scaler bridge only when required * (when selecting comparator input based on VrefInt: VrefInt or diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h index d2c5cbb842..a7a1ddd05f 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h @@ -107,7 +107,7 @@ typedef struct #define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ #define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ #define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ #endif #if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) @@ -118,7 +118,7 @@ typedef struct #define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ #endif #define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ #endif #if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) @@ -126,7 +126,7 @@ typedef struct #endif #define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ #define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ -#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined STM32WB35xx +#if defined (STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) || defined (STM32WB15xx) #define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ #endif @@ -141,6 +141,16 @@ typedef struct LL_EXTI_LINE_21 | LL_EXTI_LINE_22 | LL_EXTI_LINE_23 | \ LL_EXTI_LINE_24 | LL_EXTI_LINE_25 | LL_EXTI_LINE_28 | \ LL_EXTI_LINE_29 | LL_EXTI_LINE_30 | LL_EXTI_LINE_31) /*!< All Extended line not reserved*/ +#elif defined (STM32WB15xx) +#define LL_EXTI_LINE_ALL_0_31 (LL_EXTI_LINE_0 | LL_EXTI_LINE_1 | LL_EXTI_LINE_2 | \ + LL_EXTI_LINE_3 | LL_EXTI_LINE_4 | LL_EXTI_LINE_5 | \ + LL_EXTI_LINE_6 | LL_EXTI_LINE_7 | LL_EXTI_LINE_8 | \ + LL_EXTI_LINE_9 | LL_EXTI_LINE_10 | LL_EXTI_LINE_11 | \ + LL_EXTI_LINE_12 | LL_EXTI_LINE_13 | LL_EXTI_LINE_14 | \ + LL_EXTI_LINE_15 | LL_EXTI_LINE_16 | LL_EXTI_LINE_17 | \ + LL_EXTI_LINE_18 | LL_EXTI_LINE_19 | LL_EXTI_LINE_20 | \ + LL_EXTI_LINE_22 | LL_EXTI_LINE_24 | LL_EXTI_LINE_25 | \ + LL_EXTI_LINE_29 | LL_EXTI_LINE_30 | LL_EXTI_LINE_31) /*!< All Extended line not reserved*/ #else #define LL_EXTI_LINE_ALL_0_31 (LL_EXTI_LINE_0 | LL_EXTI_LINE_1 | LL_EXTI_LINE_2 | \ LL_EXTI_LINE_3 | LL_EXTI_LINE_4 | LL_EXTI_LINE_5 | \ @@ -180,7 +190,7 @@ typedef struct #define LL_EXTI_LINE_ALL_32_63 (LL_EXTI_LINE_33 | LL_EXTI_LINE_36 | LL_EXTI_LINE_37 | \ LL_EXTI_LINE_38 | LL_EXTI_LINE_39 | LL_EXTI_LINE_40 | \ LL_EXTI_LINE_41 | LL_EXTI_LINE_42 | LL_EXTI_LINE_44 | \ - LL_EXTI_LINE_45 | LL_EXTI_LINE_48) /*!< All Extended line not reserved*/ + LL_EXTI_LINE_45 | LL_EXTI_LINE_46 | LL_EXTI_LINE_48) /*!< All Extended line not reserved*/ #else #define LL_EXTI_LINE_ALL_32_63 (LL_EXTI_LINE_33 | LL_EXTI_LINE_36 | LL_EXTI_LINE_37 | \ LL_EXTI_LINE_38 | LL_EXTI_LINE_39 | LL_EXTI_LINE_40 | \ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_i2c.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_i2c.h index 44fb4fe368..29160c381e 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_i2c.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_i2c.h @@ -1163,7 +1163,7 @@ __STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t Timeout } /** - * @brief Get the SMBus Extented Cumulative Clock TimeoutB setting. + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not * SMBus feature is supported by the I2Cx Instance. * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h index b502fa0ca5..f2b15a872d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lptim.h @@ -155,7 +155,7 @@ typedef struct /** @defgroup LPTIM_LL_EC_OUTPUT_WAVEFORM Output Waveform Type * @{ */ -#define LL_LPTIM_OUTPUT_WAVEFORM_PWM 0x00000000U /*!<LPTIM generates either a PWM waveform or a One pulse waveform depending on chosen operating mode CONTINOUS or SINGLE*/ +#define LL_LPTIM_OUTPUT_WAVEFORM_PWM 0x00000000U /*!<LPTIM generates either a PWM waveform or a One pulse waveform depending on chosen operating mode CONTINUOUS or SINGLE*/ #define LL_LPTIM_OUTPUT_WAVEFORM_SETONCE LPTIM_CFGR_WAVE /*!<LPTIM generates a Set Once waveform*/ /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h index c1bd9a4bfa..9edd8daeec 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_lpuart.h @@ -100,36 +100,43 @@ typedef struct uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetPrescaler().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetBaudRate().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetDataWidth().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetStopBitsLength().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ uint32_t Parity; /*!< Specifies the parity mode. This parameter can be a value of @ref LPUART_LL_EC_PARITY. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetParity().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetTransferDirection().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. - This feature can be modified afterwards using unitary function @ref LL_LPUART_SetHWFlowCtrl().*/ + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ } LL_LPUART_InitTypeDef; @@ -267,18 +274,18 @@ typedef struct /** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler * @{ */ -#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not devided */ -#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock devided by 2 */ -#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock devided by 4 */ -#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 6 */ -#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock devided by 8 */ -#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 10 */ -#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock devided by 12 */ -#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 16 */ -#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock devided by 32 */ -#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 64 */ -#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock devided by 128 */ -#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 256 */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ /** * @} */ @@ -442,8 +449,9 @@ typedef struct * @param __BAUDRATE__ Baud Rate value to achieve * @retval LPUARTDIV value to be used for BRR register filling */ -#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)])) * LPUART_LPUARTDIV_FREQ_MUL)\ - + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) /** * @} @@ -629,7 +637,8 @@ __STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(USART_TypeDef *LPUARTx) */ __STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) { - MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | (RXThreshold << USART_CR3_RXFTCFG_Pos)); + MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); } /** @@ -1345,7 +1354,10 @@ __STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(USART_TypeDef *LPUARTx) __STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, uint32_t BaudRate) { - LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } } /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h index 852c3a0e22..4c8a15af15 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_pwr.h @@ -90,10 +90,12 @@ extern "C" { #endif #define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 #define LL_PWR_SCR_CC2HF PWR_SCR_CC2HF -#define LL_PWR_SCR_C802AF PWR_SCR_C802AF #define LL_PWR_SCR_CBLEAF PWR_SCR_CBLEAF #define LL_PWR_SCR_CCRPEF PWR_SCR_CCRPEF +#if defined(PWR_CR3_E802A) +#define LL_PWR_SCR_C802AF PWR_SCR_C802AF #define LL_PWR_SCR_C802WUF PWR_SCR_C802WUF +#endif #define LL_PWR_SCR_CBLEWUF PWR_SCR_CBLEWUF #if defined(PWR_CR5_SMPSEN) #define LL_PWR_SCR_CBORHF PWR_SCR_CBORHF @@ -145,9 +147,12 @@ extern "C" { /* Radio (BLE or 802.15.4) flags */ #define LL_PWR_FLAG_BLEWU PWR_SR1_BLEWUF /* BLE wakeup interrupt flag */ -#define LL_PWR_FLAG_802WU PWR_SR1_802WUF /* 802.15.4 wakeup interrupt flag */ + #define LL_PWR_FLAG_BLEA PWR_SR1_BLEAF /* BLE end of activity interrupt flag */ +#if defined(PWR_CR3_E802A) +#define LL_PWR_FLAG_802WU PWR_SR1_802WUF /* 802.15.4 wakeup interrupt flag */ #define LL_PWR_FLAG_802A PWR_SR1_802AF /* 802.15.4 end of activity interrupt flag */ +#endif #define LL_PWR_FLAG_CRPE PWR_SR1_CRPEF /* Critical radio phase end of activity interrupt flag */ #define LL_PWR_FLAG_CRP PWR_EXTSCR_CRPF /* Critical radio system phase */ @@ -179,7 +184,9 @@ extern "C" { */ #define LL_PWR_MODE_STOP0 (0x000000000U) #define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_0) +#if defined(PWR_SUPPORT_STOP2) #define LL_PWR_MODE_STOP2 (PWR_CR1_LPMS_1) +#endif #define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1 | PWR_CR1_LPMS_0) #define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2) /** @@ -521,9 +528,11 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) * @param LowPowerMode This parameter can be one of the following values: * @arg @ref LL_PWR_MODE_STOP0 * @arg @ref LL_PWR_MODE_STOP1 - * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STOP2 (*) * @arg @ref LL_PWR_MODE_STANDBY * @arg @ref LL_PWR_MODE_SHUTDOWN + * + * (*) Not available on devices STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) @@ -537,9 +546,11 @@ __STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) * @retval Returned value can be one of the following values: * @arg @ref LL_PWR_MODE_STOP0 * @arg @ref LL_PWR_MODE_STOP1 - * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STOP2 (*) * @arg @ref LL_PWR_MODE_STANDBY * @arg @ref LL_PWR_MODE_SHUTDOWN + * + * (*) Not available on devices STM32WB15xx, STM32WB10xx */ __STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) { @@ -557,7 +568,7 @@ __STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) __STATIC_INLINE void LL_PWR_SetFlashPowerModeLPRun(uint32_t FlashLowPowerMode) { /* Unlock bit FPDR */ - WRITE_REG(PWR->CR1, 0x0000C1B0U); + WRITE_REG(PWR->CR1, 0x0000C1B0UL); /* Update bit FPDR */ MODIFY_REG(PWR->CR1, PWR_CR1_FPDR, FlashLowPowerMode); @@ -640,7 +651,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void) * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V * - * (*) Not available on devices STM32WB50xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) @@ -656,7 +667,7 @@ __STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V * - * (*) Not available on devices STM32WB50xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) @@ -672,7 +683,7 @@ __STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) * @arg @ref LL_PWR_PVM_VDDA_1_62V * - * (*) Not available on devices STM32WB50xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage) @@ -808,7 +819,9 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) } /** - * @brief Enable SRAM2 content retention in Standby mode + * @brief Enable SRAM2a content retention in Standby mode + * @note On devices STM32WB15xx, STM32WB10xx, retention is extended + * to SRAM1, SRAM2a and SRAM2b. * @rmtoll CR3 RRS LL_PWR_EnableSRAM2Retention * @retval None */ @@ -818,7 +831,9 @@ __STATIC_INLINE void LL_PWR_EnableSRAM2Retention(void) } /** - * @brief Disable SRAM2 content retention in Standby mode + * @brief Disable SRAM2a content retention in Standby mode + * @note On devices STM32WB15xx, STM32WB10xx, retention is extended + * to SRAM1, SRAM2a and SRAM2b. * @rmtoll CR3 RRS LL_PWR_DisableSRAM2Retention * @retval None */ @@ -829,6 +844,8 @@ __STATIC_INLINE void LL_PWR_DisableSRAM2Retention(void) /** * @brief Check if SRAM2 content retention in Standby mode is enabled + * @note On devices STM32WB15xx, STM32WB10xx, retention is extended + * to SRAM1, SRAM2a and SRAM2b. * @rmtoll CR3 RRS LL_PWR_IsEnabledSRAM2Retention * @retval State of bit (1 or 0). */ @@ -851,7 +868,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM2Retention(void) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) @@ -873,7 +890,7 @@ __STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) @@ -895,7 +912,7 @@ __STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) @@ -972,7 +989,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) @@ -994,7 +1011,7 @@ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) @@ -1016,7 +1033,7 @@ __STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval State of bit (1 or 0). */ __STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) @@ -1323,7 +1340,7 @@ __STATIC_INLINE uint32_t LL_PWR_GetBORConfig(void) * * (1) SMPS operating mode step down or open depends on system low-power mode: * - step down mode if system low power mode is run, LP run or stop0, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown * @retval None */ __STATIC_INLINE void LL_PWR_SMPS_SetMode(uint32_t OperatingMode) @@ -1345,7 +1362,7 @@ __STATIC_INLINE void LL_PWR_SMPS_SetMode(uint32_t OperatingMode) * * (1) SMPS operating mode step down or open depends on system low-power mode: * - step down mode if system low power mode is run, LP run or stop0, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown */ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetMode(void) { @@ -1366,7 +1383,7 @@ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetMode(void) * requested operating mode can differ from effective low power mode. * - dependency on system low-power mode: * - step down mode if system low power mode is run, LP run or stop0, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown * - dependency on BOR level: * - bypass mode if supply voltage drops below BOR level * @note This functions check flags of SMPS operating modes step down @@ -1380,7 +1397,7 @@ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetMode(void) * * (1) SMPS operating mode step down or open depends on system low-power mode: * - step down mode if system low power mode is run, LP run or stop0, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown */ __STATIC_INLINE uint32_t LL_PWR_SMPS_GetEffectiveMode(void) { @@ -1637,9 +1654,11 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledBootC2(void) * @param LowPowerMode This parameter can be one of the following values: * @arg @ref LL_PWR_MODE_STOP0 * @arg @ref LL_PWR_MODE_STOP1 - * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STOP2 (*) * @arg @ref LL_PWR_MODE_STANDBY * @arg @ref LL_PWR_MODE_SHUTDOWN + * + * (*) Not available on devices STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_C2_PWR_SetPowerMode(uint32_t LowPowerMode) @@ -1653,9 +1672,11 @@ __STATIC_INLINE void LL_C2_PWR_SetPowerMode(uint32_t LowPowerMode) * @retval Returned value can be one of the following values: * @arg @ref LL_PWR_MODE_STOP0 * @arg @ref LL_PWR_MODE_STOP1 - * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STOP2 (*) * @arg @ref LL_PWR_MODE_STANDBY * @arg @ref LL_PWR_MODE_SHUTDOWN + * + * (*) Not available on devices STM32WB15xx, STM32WB10xx */ __STATIC_INLINE uint32_t LL_C2_PWR_GetPowerMode(void) { @@ -1673,7 +1694,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_GetPowerMode(void) __STATIC_INLINE void LL_C2_PWR_SetFlashPowerModeLPRun(uint32_t FlashLowPowerMode) { /* Unlock bit FPDR */ - WRITE_REG(PWR->C2CR1, 0x0000C1B0U); + WRITE_REG(PWR->C2CR1, 0x0000C1B0UL); /* Update bit FPDR */ MODIFY_REG(PWR->C2CR1, PWR_C2CR1_FPDR, FlashLowPowerMode); @@ -1761,7 +1782,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledInternWU(void) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_C2_PWR_EnableWakeUpPin(uint32_t WakeUpPin) @@ -1783,7 +1804,7 @@ __STATIC_INLINE void LL_C2_PWR_EnableWakeUpPin(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE void LL_C2_PWR_DisableWakeUpPin(uint32_t WakeUpPin) @@ -1805,7 +1826,7 @@ __STATIC_INLINE void LL_C2_PWR_DisableWakeUpPin(uint32_t WakeUpPin) * @arg @ref LL_PWR_WAKEUP_PIN4 * @arg @ref LL_PWR_WAKEUP_PIN5 (*) * - * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx + * (*) Not available on devices STM32WB50xx, STM32WB35xx, STM32WB30xx, STM32WB15xx, STM32WB10xx * @retval None */ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) @@ -1874,6 +1895,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsWokenUp_BLE(void) return ((READ_BIT(PWR->C2CR1, PWR_C2CR1_BLEEWKUP) == (PWR_C2CR1_BLEEWKUP)) ? 1UL : 0UL); } +#if defined(PWR_CR3_E802A) /** * @brief Wakeup 802.15.4 controller from its sleep mode * @note This bit is automatically reset when 802.15.4 controller @@ -1896,6 +1918,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsWokenUp_802_15_4(void) { return ((READ_BIT(PWR->C2CR1, PWR_C2CR1_802EWKUP) == (PWR_C2CR1_802EWKUP)) ? 1UL : 0UL); } +#endif /** * @} @@ -2179,6 +2202,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BLEWU(void) return ((READ_BIT(PWR->SR1, PWR_SR1_BLEWUF) == (PWR_SR1_BLEWUF)) ? 1UL : 0UL); } +#if defined(PWR_CR3_E802A) /** * @brief Get 802.15.4 wakeup interrupt flag * @rmtoll SR1 802WUF LL_PWR_IsActiveFlag_802WU @@ -2188,6 +2212,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_802WU(void) { return ((READ_BIT(PWR->SR1, PWR_SR1_802WUF) == (PWR_SR1_802WUF)) ? 1UL : 0UL); } +#endif /** * @brief Get BLE end of activity interrupt flag @@ -2199,6 +2224,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BLEA(void) return ((READ_BIT(PWR->SR1, PWR_SR1_BLEAF) == (PWR_SR1_BLEAF)) ? 1UL : 0UL); } +#if defined(PWR_CR3_E802A) /** * @brief Get 802.15.4 end of activity interrupt flag * @rmtoll SR1 802AF LL_PWR_IsActiveFlag_802A @@ -2208,6 +2234,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_802A(void) { return ((READ_BIT(PWR->SR1, PWR_SR1_802AF) == (PWR_SR1_802AF)) ? 1UL : 0UL); } +#endif /** * @brief Get critical radio phase end of activity interrupt flag @@ -2239,6 +2266,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_BLEWU(void) WRITE_REG(PWR->SCR, PWR_SCR_CBLEWUF); } +#if defined(PWR_CR3_E802A) /** * @brief Clear 802.15.4 wakeup interrupt flag * @rmtoll SCR 802WU LL_PWR_ClearFlag_802WU @@ -2248,6 +2276,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_802WU(void) { WRITE_REG(PWR->SCR, PWR_SCR_C802WUF); } +#endif /** * @brief Clear BLE end of activity interrupt flag @@ -2259,6 +2288,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_BLEA(void) WRITE_REG(PWR->SCR, PWR_SCR_CBLEAF); } +#if defined(PWR_CR3_E802A) /** * @brief Clear 802.15.4 end of activity interrupt flag * @rmtoll SCR 802AF LL_PWR_ClearFlag_802A @@ -2268,6 +2298,7 @@ __STATIC_INLINE void LL_PWR_ClearFlag_802A(void) { WRITE_REG(PWR->SCR, PWR_SCR_C802AF); } +#endif /** * @brief Clear critical radio phase end of activity interrupt flag @@ -2461,6 +2492,7 @@ __STATIC_INLINE void LL_PWR_EnableIT_BLEA(void) SET_BIT(PWR->CR3, PWR_CR3_EBLEA); } +#if defined(PWR_CR3_E802A) /** * @brief Enable 802.15.4 end of activity interrupt for CPU1 * @rmtoll CR3 E802A LL_PWR_EnableIT_802A @@ -2470,7 +2502,7 @@ __STATIC_INLINE void LL_PWR_EnableIT_802A(void) { SET_BIT(PWR->CR3, PWR_CR3_E802A); } - +#endif /** * @brief Disable BLE end of activity interrupt for CPU1 @@ -2482,6 +2514,7 @@ __STATIC_INLINE void LL_PWR_DisableIT_BLEA(void) CLEAR_BIT(PWR->CR3, PWR_CR3_EBLEA); } +#if defined(PWR_CR3_E802A) /** * @brief Disable 802.15.4 end of activity interrupt for CPU1 * @rmtoll CR3 E802A LL_PWR_DisableIT_802A @@ -2491,6 +2524,7 @@ __STATIC_INLINE void LL_PWR_DisableIT_802A(void) { CLEAR_BIT(PWR->CR3, PWR_CR3_E802A); } +#endif /** * @brief Check if BLE end of activity interrupt is enabled for CPU1 @@ -2502,6 +2536,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledIT_BLEA(void) return ((READ_BIT(PWR->CR3, PWR_CR3_EBLEA) == (PWR_CR3_EBLEA)) ? 1UL : 0UL); } +#if defined(PWR_CR3_E802A) /** * @brief Check if 802.15.4 end of activity interrupt is enabled for CPU1 * @rmtoll CR3 E802A LL_PWR_IsEnabledIT_802A @@ -2511,6 +2546,7 @@ __STATIC_INLINE uint32_t LL_PWR_IsEnabledIT_802A(void) { return ((READ_BIT(PWR->CR3, PWR_CR3_E802A) == (PWR_CR3_E802A)) ? 1UL : 0UL); } +#endif /** * @brief Enable critical radio phase end of activity interrupt for CPU1 @@ -2598,6 +2634,7 @@ __STATIC_INLINE void LL_C2_PWR_EnableIT_BLEWU(void) SET_BIT(PWR->C2CR3, PWR_C2CR3_EBLEWUP); } +#if defined(PWR_CR3_E802A) /** * @brief Enable 802.15.4 host wakeup interrupt for CPU2 * @rmtoll C2CR3 E802WUP LL_C2_PWR_EnableIT_802WU @@ -2607,6 +2644,7 @@ __STATIC_INLINE void LL_C2_PWR_EnableIT_802WU(void) { SET_BIT(PWR->C2CR3, PWR_C2CR3_E802WUP); } +#endif /** * @brief Disable BLE host wakeup interrupt for CPU2 @@ -2618,6 +2656,7 @@ __STATIC_INLINE void LL_C2_PWR_DisableIT_BLEWU(void) CLEAR_BIT(PWR->C2CR3, PWR_C2CR3_EBLEWUP); } +#if defined(PWR_CR3_E802A) /** * @brief Disable 802.15.4 host wakeup interrupt for CPU2 * @rmtoll C2CR3 E802WUP LL_C2_PWR_DisableIT_802WU @@ -2627,6 +2666,7 @@ __STATIC_INLINE void LL_C2_PWR_DisableIT_802WU(void) { CLEAR_BIT(PWR->C2CR3, PWR_C2CR3_E802WUP); } +#endif /** * @brief Check if BLE host wakeup interrupt is enabled for CPU2 @@ -2638,6 +2678,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledIT_BLEWU(void) return ((READ_BIT(PWR->C2CR3, PWR_C2CR3_EBLEWUP) == (PWR_C2CR3_EBLEWUP)) ? 1UL : 0UL); } +#if defined(PWR_CR3_E802A) /** * @brief Check if 802.15.4 host wakeup interrupt is enabled for CPU2 * @rmtoll C2CR3 E802WUP LL_C2_PWR_IsEnabledIT_802WU @@ -2647,6 +2688,7 @@ __STATIC_INLINE uint32_t LL_C2_PWR_IsEnabledIT_802WU(void) { return ((READ_BIT(PWR->C2CR3, PWR_C2CR3_E802WUP) == (PWR_C2CR3_E802WUP)) ? 1UL : 0UL); } +#endif /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h index 067b63300f..73c3832a72 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rcc.h @@ -80,7 +80,7 @@ typedef struct uint32_t HCLK1_Frequency; /*!< HCLK1 clock frequency */ uint32_t HCLK2_Frequency; /*!< HCLK2 clock frequency */ uint32_t HCLK4_Frequency; /*!< HCLK4 clock frequency */ - uint32_t HCLK5_Frequency; /*!< HCLK5 clock frequency */ + uint32_t HCLK5_Frequency; /*!< HCLK5 clock frequency */ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ } LL_RCC_ClocksTypeDef; @@ -121,15 +121,12 @@ typedef struct #define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ #endif /* LSI_VALUE */ +#if defined(RCC_HSI48_SUPPORT) #if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ #endif /* HSI48_VALUE */ - -#if defined(SPI_I2S_SUPPORT) -#if !defined (EXTERNAL_CLOCK_VALUE) -#define EXTERNAL_CLOCK_VALUE 48000U /*!< Value of the I2S_CKIN external oscillator in Hz */ -#endif /* EXTERNAL_CLOCK_VALUE */ #endif + /** * @} */ @@ -138,19 +135,21 @@ typedef struct * @brief Flags defines which can be used with LL_RCC_WriteReg function * @{ */ -#define LL_RCC_CICR_LSI1RDYC RCC_CICR_LSI1RDYC /*!< LSI1 Ready Interrupt Clear */ -#define LL_RCC_CICR_LSI2RDYC RCC_CICR_LSI2RDYC /*!< LSI1 Ready Interrupt Clear */ -#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ -#define LL_RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC /*!< MSI Ready Interrupt Clear */ -#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ -#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ -#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ -#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#define LL_RCC_CICR_LSI1RDYC RCC_CICR_LSI1RDYC /*!< LSI1 Ready Interrupt Clear */ +#define LL_RCC_CICR_LSI2RDYC RCC_CICR_LSI2RDYC /*!< LSI1 Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC /*!< MSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif #if defined(SAI1) -#define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */ #endif #define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ -#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ /** * @} */ @@ -159,26 +158,28 @@ typedef struct * @brief Flags defines which can be used with LL_RCC_ReadReg function * @{ */ -#define LL_RCC_CIFR_LSI1RDYF RCC_CIFR_LSI1RDYF /*!< LSI1 Ready Interrupt flag */ -#define LL_RCC_CIFR_LSI2RDYF RCC_CIFR_LSI2RDYF /*!< LSI2 Ready Interrupt flag */ -#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ -#define LL_RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ -#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ -#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ -#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ -#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#define LL_RCC_CIFR_LSI1RDYF RCC_CIFR_LSI1RDYF /*!< LSI1 Ready Interrupt flag */ +#define LL_RCC_CIFR_LSI2RDYF RCC_CIFR_LSI2RDYF /*!< LSI2 Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif #if defined(SAI1) -#define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ #endif #define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ -#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ -#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ -#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ -#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ -#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ -#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ -#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ -#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ /** * @} */ @@ -187,18 +188,20 @@ typedef struct * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions * @{ */ -#define LL_RCC_CIER_LSI1RDYIE RCC_CIER_LSI1RDYIE /*!< LSI1 Ready Interrupt Enable */ -#define LL_RCC_CIER_LSI2RDYIE RCC_CIER_LSI2RDYIE /*!< LSI Ready Interrupt Enable */ -#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ -#define LL_RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE /*!< MSI Ready Interrupt Enable */ -#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ -#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ -#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ -#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#define LL_RCC_CIER_LSI1RDYIE RCC_CIER_LSI1RDYIE /*!< LSI1 Ready Interrupt Enable */ +#define LL_RCC_CIER_LSI2RDYIE RCC_CIER_LSI2RDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE /*!< MSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif #if defined(SAI1) #define LL_RCC_CIER_PLLSAI1RDYIE RCC_CIER_PLLSAI1RDYIE /*!< PLLSAI1 Ready Interrupt Enable */ #endif -#define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */ +#define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */ /** * @} */ @@ -206,10 +209,10 @@ typedef struct /** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability * @{ */ -#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ -#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ #define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ -#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ /** * @} */ @@ -237,13 +240,13 @@ typedef struct /** @defgroup RCC_LL_EC_HSE_CURRENT_CONTROL HSE current control max limits * @{ */ -#define LL_RCC_HSE_CURRENTMAX_0 0x000000000U /*!< HSE current control max limit = 0.18 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_1 RCC_HSECR_HSEGMC0 /*!< HSE current control max limit = 0.57 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_2 RCC_HSECR_HSEGMC1 /*!< HSE current control max limit = 0.78 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_3 (RCC_HSECR_HSEGMC1|RCC_HSECR_HSEGMC0) /*!< HSE current control max limit = 1.13 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_4 RCC_HSECR_HSEGMC2 /*!< HSE current control max limit = 0.61 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_5 (RCC_HSECR_HSEGMC2|RCC_HSECR_HSEGMC0) /*!< HSE current control max limit = 1.65 ma/V*/ -#define LL_RCC_HSE_CURRENTMAX_6 (RCC_HSECR_HSEGMC2|RCC_HSECR_HSEGMC1) /*!< HSE current control max limit = 2.12 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_0 0x000000000U /*!< HSE current control max limit = 0.18 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_1 RCC_HSECR_HSEGMC0 /*!< HSE current control max limit = 0.57 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_2 RCC_HSECR_HSEGMC1 /*!< HSE current control max limit = 0.78 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_3 (RCC_HSECR_HSEGMC1|RCC_HSECR_HSEGMC0) /*!< HSE current control max limit = 1.13 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_4 RCC_HSECR_HSEGMC2 /*!< HSE current control max limit = 0.61 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_5 (RCC_HSECR_HSEGMC2|RCC_HSECR_HSEGMC0) /*!< HSE current control max limit = 1.65 ma/V*/ +#define LL_RCC_HSE_CURRENTMAX_6 (RCC_HSECR_HSEGMC2|RCC_HSECR_HSEGMC1) /*!< HSE current control max limit = 2.12 ma/V*/ #define LL_RCC_HSE_CURRENTMAX_7 (RCC_HSECR_HSEGMC2|RCC_HSECR_HSEGMC1|RCC_HSECR_HSEGMC0) /*!< HSE current control max limit = 2.84 ma/V*/ /** * @} @@ -252,8 +255,8 @@ typedef struct /** @defgroup RCC_LL_EC_HSE_SENSE_AMPLIFIER HSE sense amplifier threshold * @{ */ -#define LL_RCC_HSEAMPTHRESHOLD_1_2 (0x000000000U) /*!< HSE sense amplifier bias current factor = 1/2*/ -#define LL_RCC_HSEAMPTHRESHOLD_3_4 RCC_HSECR_HSES /*!< HSE sense amplifier bias current factor = 3/4*/ +#define LL_RCC_HSEAMPTHRESHOLD_1_2 (0x000000000U) /*!< HSE sense amplifier bias current factor = 1/2*/ +#define LL_RCC_HSEAMPTHRESHOLD_3_4 RCC_HSECR_HSES /*!< HSE sense amplifier bias current factor = 3/4*/ /** * @} */ @@ -270,10 +273,10 @@ typedef struct /** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch * @{ */ -#define LL_RCC_SYS_CLKSOURCE_MSI 0x00000000U /*!< MSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_0 /*!< HSI selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_1 /*!< HSE selection as system clock */ -#define LL_RCC_SYS_CLKSOURCE_PLL (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< PLL selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_MSI 0x00000000U /*!< MSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_0 /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_1 /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL (RCC_CFGR_SW_1 | RCC_CFGR_SW_0) /*!< PLL selection as system clock */ /** * @} */ @@ -281,10 +284,10 @@ typedef struct /** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status * @{ */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI 0x00000000U /*!< MSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_0 /*!< HSI used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_1 /*!< HSE used as system clock */ -#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< PLL used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI 0x00000000U /*!< MSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_0 /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_1 /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0) /*!< PLL used as system clock */ /** * @} */ @@ -292,7 +295,7 @@ typedef struct /** @defgroup RCC_LL_EC_RF_CLKSOURCE_STATUS RF system clock switch status * @{ */ -#define LL_RCC_RF_CLKSOURCE_HSI 0x00000000U /*!< HSI used as RF system clock */ +#define LL_RCC_RF_CLKSOURCE_HSI 0x00000000U /*!< HSI used as RF system clock */ #define LL_RCC_RF_CLKSOURCE_HSE_DIV2 RCC_EXTCFGR_RFCSS /*!< HSE divided by 2 used as RF system clock */ /** * @} @@ -301,19 +304,19 @@ typedef struct /** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler * @{ */ -#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< SYSCLK not divided */ -#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ -#define LL_RCC_SYSCLK_DIV_3 RCC_CFGR_HPRE_0 /*!< SYSCLK divided by 3 */ -#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ -#define LL_RCC_SYSCLK_DIV_5 RCC_CFGR_HPRE_1 /*!< SYSCLK divided by 5 */ -#define LL_RCC_SYSCLK_DIV_6 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 6 */ -#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ -#define LL_RCC_SYSCLK_DIV_10 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 10 */ -#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ -#define LL_RCC_SYSCLK_DIV_32 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 32 */ -#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ -#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ -#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_1 0x00000000U /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_3 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_3 RCC_CFGR_HPRE_0 /*!< SYSCLK divided by 3 */ +#define LL_RCC_SYSCLK_DIV_4 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_5 RCC_CFGR_HPRE_1 /*!< SYSCLK divided by 5 */ +#define LL_RCC_SYSCLK_DIV_6 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 6 */ +#define LL_RCC_SYSCLK_DIV_8 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_10 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 10 */ +#define LL_RCC_SYSCLK_DIV_16 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_32 (RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 32 */ +#define LL_RCC_SYSCLK_DIV_64 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2) /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1) /*!< SYSCLK divided by 256 */ #define LL_RCC_SYSCLK_DIV_512 (RCC_CFGR_HPRE_3 | RCC_CFGR_HPRE_2 | RCC_CFGR_HPRE_1 | RCC_CFGR_HPRE_0) /*!< SYSCLK divided by 512 */ /** * @} @@ -322,10 +325,10 @@ typedef struct /** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) * @{ */ -#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK1 not divided */ -#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_2 /*!< HCLK1 divided by 2 */ -#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE1_2 | RCC_CFGR_PPRE1_0) /*!< HCLK1 divided by 4 */ -#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE1_2 | RCC_CFGR_PPRE1_1) /*!< HCLK1 divided by 8 */ +#define LL_RCC_APB1_DIV_1 0x00000000U /*!< HCLK1 not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_2 /*!< HCLK1 divided by 2 */ +#define LL_RCC_APB1_DIV_4 (RCC_CFGR_PPRE1_2 | RCC_CFGR_PPRE1_0) /*!< HCLK1 divided by 4 */ +#define LL_RCC_APB1_DIV_8 (RCC_CFGR_PPRE1_2 | RCC_CFGR_PPRE1_1) /*!< HCLK1 divided by 8 */ #define LL_RCC_APB1_DIV_16 (RCC_CFGR_PPRE1_2 | RCC_CFGR_PPRE1_1 | RCC_CFGR_PPRE1_0) /*!< HCLK1 divided by 16 */ /** * @} @@ -334,10 +337,10 @@ typedef struct /** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) * @{ */ -#define LL_RCC_APB2_DIV_1 0x00000000U /*!< HCLK1 not divided */ -#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_2 /*!< HCLK1 divided by 2 */ -#define LL_RCC_APB2_DIV_4 (RCC_CFGR_PPRE2_2 | RCC_CFGR_PPRE2_0) /*!< HCLK1 divided by 4 */ -#define LL_RCC_APB2_DIV_8 (RCC_CFGR_PPRE2_2 | RCC_CFGR_PPRE2_1) /*!< HCLK1 divided by 8 */ +#define LL_RCC_APB2_DIV_1 0x00000000U /*!< HCLK1 not divided */ +#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_2 /*!< HCLK1 divided by 2 */ +#define LL_RCC_APB2_DIV_4 (RCC_CFGR_PPRE2_2 | RCC_CFGR_PPRE2_0) /*!< HCLK1 divided by 4 */ +#define LL_RCC_APB2_DIV_8 (RCC_CFGR_PPRE2_2 | RCC_CFGR_PPRE2_1) /*!< HCLK1 divided by 8 */ #define LL_RCC_APB2_DIV_16 (RCC_CFGR_PPRE2_2 | RCC_CFGR_PPRE2_1 | RCC_CFGR_PPRE2_0) /*!< HCLK1 divided by 16 */ /** * @} @@ -355,17 +358,19 @@ typedef struct /** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection * @{ */ -#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ -#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE after stabilization selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSI1 (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI1 selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSI2 (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI2 selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_3 /*!< LSE selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSI48 (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_3) /*!< HSI48 selection as MCO1 source */ -#define LL_RCC_MCO1SOURCE_HSE_BEFORE_STAB (RCC_CFGR_MCOSEL_2|RCC_CFGR_MCOSEL_3) /*!< HSE before stabilization selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE after stabilization selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI1 (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI1 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI2 (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI2 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_3 /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO1SOURCE_HSI48 (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_3) /*!< HSI48 selection as MCO1 source */ +#endif +#define LL_RCC_MCO1SOURCE_HSE_BEFORE_STAB (RCC_CFGR_MCOSEL_2|RCC_CFGR_MCOSEL_3) /*!< HSE before stabilization selection as MCO1 source */ /** * @} */ @@ -373,11 +378,11 @@ typedef struct /** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler * @{ */ -#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO not divided */ -#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ -#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ -#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ -#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ +#define LL_RCC_MCO1_DIV_1 0x00000000U /*!< MCO not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_0 /*!< MCO divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_1 /*!< MCO divided by 4 */ +#define LL_RCC_MCO1_DIV_8 (RCC_CFGR_MCOPRE_1 | RCC_CFGR_MCOPRE_0) /*!< MCO divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_2 /*!< MCO divided by 16 */ /** * @} */ @@ -396,9 +401,9 @@ typedef struct /** @defgroup RCC_LL_EC_SMPS_CLKSOURCE_STATUS SMPS clock switch status * @{ */ -#define LL_RCC_SMPS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as SMPS clock */ -#define LL_RCC_SMPS_CLKSOURCE_STATUS_MSI RCC_SMPSCR_SMPSSWS_0 /*!< MSI used as SMPS clock */ -#define LL_RCC_SMPS_CLKSOURCE_STATUS_HSE RCC_SMPSCR_SMPSSWS_1 /*!< HSE used as SMPS clock */ +#define LL_RCC_SMPS_CLKSOURCE_STATUS_HSI 0x00000000U /*!< HSI used as SMPS clock */ +#define LL_RCC_SMPS_CLKSOURCE_STATUS_MSI RCC_SMPSCR_SMPSSWS_0 /*!< MSI used as SMPS clock */ +#define LL_RCC_SMPS_CLKSOURCE_STATUS_HSE RCC_SMPSCR_SMPSSWS_1 /*!< HSE used as SMPS clock */ #define LL_RCC_SMPS_CLKSOURCE_STATUS_NO_CLOCK (RCC_SMPSCR_SMPSSWS_0|RCC_SMPSCR_SMPSSWS_1) /*!< No Clock used as SMPS clock */ /** * @} @@ -430,10 +435,10 @@ typedef struct /** @defgroup RCC_LL_EC_USART1_CLKSOURCE USART1 CLKSOURCE * @{ */ -#define LL_RCC_USART1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 selected as USART1 clock */ +#define LL_RCC_USART1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 selected as USART1 clock */ #define LL_RCC_USART1_CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK selected as USART1 clock */ -#define LL_RCC_USART1_CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI selected as USART1 clock */ -#define LL_RCC_USART1_CLKSOURCE_LSE RCC_CCIPR_USART1SEL /*!< LSE selected as USART1 clock */ +#define LL_RCC_USART1_CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI selected as USART1 clock */ +#define LL_RCC_USART1_CLKSOURCE_LSE RCC_CCIPR_USART1SEL /*!< LSE selected as USART1 clock */ /** * @} */ @@ -444,8 +449,8 @@ typedef struct */ #define LL_RCC_LPUART1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 selected as LPUART1 clock */ #define LL_RCC_LPUART1_CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYCLK selected as LPUART1 clock */ -#define LL_RCC_LPUART1_CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI selected as LPUART1 clock */ -#define LL_RCC_LPUART1_CLKSOURCE_LSE RCC_CCIPR_LPUART1SEL /*!< LSE selected as LPUART1 clock */ +#define LL_RCC_LPUART1_CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI selected as LPUART1 clock */ +#define LL_RCC_LPUART1_CLKSOURCE_LSE RCC_CCIPR_LPUART1SEL /*!< LSE selected as LPUART1 clock */ /** * @} */ @@ -454,13 +459,13 @@ typedef struct /** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE I2Cx CLKSOURCE * @{ */ -#define LL_RCC_I2C1_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C1 clock */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C1 clock */ #define LL_RCC_I2C1_CLKSOURCE_SYSCLK (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (RCC_CCIPR_I2C1SEL_0 >> 4)) /*!< SYSCLK selected as I2C1 clock */ -#define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (RCC_CCIPR_I2C1SEL_1 >> 4)) /*!< HSI selected as I2C1 clock */ +#define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C1SEL << 4) | (RCC_CCIPR_I2C1SEL_1 >> 4)) /*!< HSI selected as I2C1 clock */ #if defined(I2C3) -#define LL_RCC_I2C3_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C3 clock */ +#define LL_RCC_I2C3_CLKSOURCE_PCLK1 (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (0x00000000U >> 4)) /*!< PCLK1 selected as I2C3 clock */ #define LL_RCC_I2C3_CLKSOURCE_SYSCLK (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (RCC_CCIPR_I2C3SEL_0 >> 4)) /*!< SYSCLK selected as I2C3 clock */ -#define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (RCC_CCIPR_I2C3SEL_1 >> 4)) /*!< HSI selected as I2C3 clock */ +#define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)((RCC_CCIPR_I2C3SEL << 4) | (RCC_CCIPR_I2C3SEL_1 >> 4)) /*!< HSI selected as I2C3 clock */ #endif /** * @} @@ -470,13 +475,13 @@ typedef struct * @{ */ #define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 (uint32_t)(RCC_CCIPR_LPTIM1SEL | (0x00000000U >> 16)) /*!< PCLK1 selected as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSI (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16)) /*!< LSI selected as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_HSI (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16)) /*!< HSI selected as LPTIM1 clock */ -#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16)) /*!< LSE selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16)) /*!< LSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16)) /*!< HSI selected as LPTIM1 clock */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (uint32_t)(RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16)) /*!< LSE selected as LPTIM1 clock */ #define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 (uint32_t)(RCC_CCIPR_LPTIM2SEL | (0x00000000U >> 16)) /*!< PCLK1 selected as LPTIM2 clock */ -#define LL_RCC_LPTIM2_CLKSOURCE_LSI (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16)) /*!< LSI selected as LPTIM2 clock */ -#define LL_RCC_LPTIM2_CLKSOURCE_HSI (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16)) /*!< HSI selected as LPTIM2 clock */ -#define LL_RCC_LPTIM2_CLKSOURCE_LSE (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16)) /*!< LSE selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSI (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16)) /*!< LSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_HSI (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16)) /*!< HSI selected as LPTIM2 clock */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSE (uint32_t)(RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16)) /*!< LSE selected as LPTIM2 clock */ /** * @} */ @@ -485,9 +490,9 @@ typedef struct /** @defgroup RCC_LL_EC_SAI1_CLKSOURCE SAI1 CLKSOURCE * @{ */ -#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 0x00000000U /*!< PLLSAI1 selected as SAI1 clock */ -#define LL_RCC_SAI1_CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_0 /*!< PLL selected as SAI1 clock */ -#define LL_RCC_SAI1_CLKSOURCE_HSI RCC_CCIPR_SAI1SEL_1 /*!< HSI selected as SAI1 clock */ +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 0x00000000U /*!< PLLSAI1 selected as SAI1 clock */ +#define LL_RCC_SAI1_CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_0 /*!< PLL selected as SAI1 clock */ +#define LL_RCC_SAI1_CLKSOURCE_HSI RCC_CCIPR_SAI1SEL_1 /*!< HSI selected as SAI1 clock */ #define LL_RCC_SAI1_CLKSOURCE_PIN RCC_CCIPR_SAI1SEL /*!< External input selected as SAI1 clock */ /** * @} @@ -497,12 +502,14 @@ typedef struct /** @defgroup RCC_LL_EC_CLK48_CLKSOURCE CLK48 CLKSOURCE * @{ */ -#define LL_RCC_CLK48_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 selected as CLK48 clock*/ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CLK48_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 selected as CLK48 clock */ +#endif #if defined(SAI1) -#define LL_RCC_CLK48_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 selected as CLK48 clock*/ +#define LL_RCC_CLK48_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 selected as CLK48 clock */ #endif -#define LL_RCC_CLK48_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL selected as CLK48 clock*/ -#define LL_RCC_CLK48_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI selected as CLK48 clock*/ +#define LL_RCC_CLK48_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL selected as CLK48 clock */ +#define LL_RCC_CLK48_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI selected as CLK48 clock */ /** * @} */ @@ -510,12 +517,14 @@ typedef struct /** @defgroup RCC_LL_EC_USB_CLKSOURCE USB CLKSOURCE * @{ */ -#define LL_RCC_USB_CLKSOURCE_HSI48 LL_RCC_CLK48_CLKSOURCE_HSI48 /*!< HSI48 selected as USB clock*/ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_HSI48 LL_RCC_CLK48_CLKSOURCE_HSI48 /*!< HSI48 selected as USB clock */ +#endif #if defined(SAI1) -#define LL_RCC_USB_CLKSOURCE_PLLSAI1 LL_RCC_CLK48_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 selected as USB clock*/ +#define LL_RCC_USB_CLKSOURCE_PLLSAI1 LL_RCC_CLK48_CLKSOURCE_PLLSAI1 /*!< PLLSAI1 selected as USB clock */ #endif -#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CLK48_CLKSOURCE_PLL /*!< PLL selected as USB clock*/ -#define LL_RCC_USB_CLKSOURCE_MSI LL_RCC_CLK48_CLKSOURCE_MSI /*!< MSI selected as USB clock*/ +#define LL_RCC_USB_CLKSOURCE_PLL LL_RCC_CLK48_CLKSOURCE_PLL /*!< PLL selected as USB clock */ +#define LL_RCC_USB_CLKSOURCE_MSI LL_RCC_CLK48_CLKSOURCE_MSI /*!< MSI selected as USB clock */ /** * @} */ @@ -526,9 +535,11 @@ typedef struct #define LL_RCC_ADC_CLKSOURCE_NONE 0x00000000U /*!< no Clock used as ADC clock*/ #if defined(STM32WB55xx) || defined (STM32WB5Mxx) || defined (STM32WB35xx) #define LL_RCC_ADC_CLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 /*!< PLLSAI1 selected as ADC clock*/ +#elif defined (STM32WB15xx) +#define LL_RCC_ADC_CLKSOURCE_HSI RCC_CCIPR_ADCSEL_0 /*!< HSI selected as ADC clock */ #endif -#define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_1 /*!< PLL selected as ADC clock*/ -#define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK selected as ADC clock*/ +#define LL_RCC_ADC_CLKSOURCE_PLL RCC_CCIPR_ADCSEL_1 /*!< PLL selected as ADC clock */ +#define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK selected as ADC clock */ /** * @} */ @@ -537,24 +548,12 @@ typedef struct * @{ */ #define LL_RCC_RNG_CLKSOURCE_CLK48 0x00000000U /*!< CLK48 divided by 3 selected as RNG Clock */ -#define LL_RCC_RNG_CLKSOURCE_LSI RCC_CCIPR_RNGSEL_0 /*!< LSI selected as ADC clock*/ -#define LL_RCC_RNG_CLKSOURCE_LSE RCC_CCIPR_RNGSEL_1 /*!< LSE selected as ADC clock*/ +#define LL_RCC_RNG_CLKSOURCE_LSI RCC_CCIPR_RNGSEL_0 /*!< LSI selected as ADC clock */ +#define LL_RCC_RNG_CLKSOURCE_LSE RCC_CCIPR_RNGSEL_1 /*!< LSE selected as ADC clock */ /** * @} */ -#if defined(SPI_I2S_SUPPORT) -/** @defgroup RCC_LL_EC_I2SCLKSOURCE Peripheral I2S clock source selection - * @{ - */ -#define LL_RCC_I2S_CLKSOURCE_NONE 0x00000000U /*!< no Clock used as I2S clock*/ -#define LL_RCC_I2S_CLKSOURCE_HSI RCC_CCIPR_I2SSEL_0 /*!< HSI clock used as I2S clock source */ -#define LL_RCC_I2S_CLKSOURCE_PLL RCC_CCIPR_I2SSEL_1 /*!< PLL clock used as I2S clock source */ -#define LL_RCC_I2S_CLKSOURCE_PIN RCC_CCIPR_I2SSEL /*!< External clock used as I2S clock source */ -/** - * @} - */ -#endif /** @defgroup RCC_LL_EC_USART1 USART1 * @{ @@ -634,22 +633,13 @@ typedef struct * @} */ -#if defined(SPI_I2S_SUPPORT) -/** @defgroup RCC_LL_EC_I2S I2S - * @{ - */ -#define LL_RCC_I2S_CLKSOURCE RCC_CCIPR_I2SSEL /*!< I2S clock source selection bits */ -/** - * @} - */ -#endif /** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection * @{ */ -#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ -#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ #define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ /** @@ -659,10 +649,9 @@ typedef struct /** @defgroup RCC_LL_EC_RFWKP_CLKSOURCE RF Wakeup clock source selection * @{ */ -#define LL_RCC_RFWKP_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RF Wakeup clock */ -#define LL_RCC_RFWKP_CLKSOURCE_LSE RCC_CSR_RFWKPSEL_0 /*!< LSE oscillator clock used as RF Wakeup clock */ -#define LL_RCC_RFWKP_CLKSOURCE_LSI RCC_CSR_RFWKPSEL_1 /*!< LSI oscillator clock used as RF Wakeup clock */ -#define LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024 RCC_CSR_RFWKPSEL /*!< HSE oscillator clock divided by 1024 used as RF Wakeup clock */ +#define LL_RCC_RFWKP_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RF Wakeup clock */ +#define LL_RCC_RFWKP_CLKSOURCE_LSE RCC_CSR_RFWKPSEL_0 /*!< LSE oscillator clock used as RF Wakeup clock */ +#define LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024 RCC_CSR_RFWKPSEL /*!< HSE oscillator clock divided by 1024 used as RF Wakeup clock */ /** * @} @@ -672,9 +661,9 @@ typedef struct /** @defgroup RCC_LL_EC_PLLSOURCE PLL and PLLSAI1 entry clock source * @{ */ -#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ -#define LL_RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_0 /*!< MSI clock selected as PLL entry clock source */ -#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_1 /*!< HSI clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ +#define LL_RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_0 /*!< MSI clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_1 /*!< HSI clock selected as PLL entry clock source */ #define LL_RCC_PLLSOURCE_HSE (RCC_PLLCFGR_PLLSRC_1 | RCC_PLLCFGR_PLLSRC_0) /*!< HSE clock selected as PLL entry clock source */ /** * @} @@ -712,37 +701,37 @@ typedef struct /** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) * @{ */ -#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ -#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ -#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ -#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ -#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ -#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ -#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ -#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ -#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ -#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ -#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ -#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ -#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ -#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ -#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 16 */ -#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ -#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ -#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ -#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ -#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ -#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ -#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ -#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 24 */ -#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ -#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ -#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27*/ -#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 28 */ -#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ -#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 30 */ -#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 31 */ -#define LL_RCC_PLLP_DIV_32 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 32 */ +#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27 */ +#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 31 */ +#define LL_RCC_PLLP_DIV_32 (RCC_PLLCFGR_PLLP_0|RCC_PLLCFGR_PLLP_1|RCC_PLLCFGR_PLLP_2|RCC_PLLCFGR_PLLP_3|RCC_PLLCFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 32 */ /** * @} */ @@ -766,12 +755,12 @@ typedef struct /** @defgroup RCC_LL_EC_PLLSAI1Q PLLSAI1 division factor (PLLQ) * @{ */ -#define LL_RCC_PLLSAI1Q_DIV_2 (RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 2 */ -#define LL_RCC_PLLSAI1Q_DIV_3 (RCC_PLLSAI1CFGR_PLLQ_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 3 */ -#define LL_RCC_PLLSAI1Q_DIV_4 (RCC_PLLSAI1CFGR_PLLQ_1 | RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 4 */ -#define LL_RCC_PLLSAI1Q_DIV_5 (RCC_PLLSAI1CFGR_PLLQ_2) /*!< PLLSAI1 division factor for PLLSAI1Q output by 5 */ -#define LL_RCC_PLLSAI1Q_DIV_6 (RCC_PLLSAI1CFGR_PLLQ_2 | RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 6 */ -#define LL_RCC_PLLSAI1Q_DIV_7 (RCC_PLLSAI1CFGR_PLLQ_2 | RCC_PLLSAI1CFGR_PLLQ_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 7 */ +#define LL_RCC_PLLSAI1Q_DIV_2 (RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 2 */ +#define LL_RCC_PLLSAI1Q_DIV_3 (RCC_PLLSAI1CFGR_PLLQ_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 3 */ +#define LL_RCC_PLLSAI1Q_DIV_4 (RCC_PLLSAI1CFGR_PLLQ_1 | RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 4 */ +#define LL_RCC_PLLSAI1Q_DIV_5 (RCC_PLLSAI1CFGR_PLLQ_2) /*!< PLLSAI1 division factor for PLLSAI1Q output by 5 */ +#define LL_RCC_PLLSAI1Q_DIV_6 (RCC_PLLSAI1CFGR_PLLQ_2 | RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 6 */ +#define LL_RCC_PLLSAI1Q_DIV_7 (RCC_PLLSAI1CFGR_PLLQ_2 | RCC_PLLSAI1CFGR_PLLQ_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 7 */ #define LL_RCC_PLLSAI1Q_DIV_8 (RCC_PLLSAI1CFGR_PLLQ_2 | RCC_PLLSAI1CFGR_PLLQ_1 | RCC_PLLSAI1CFGR_PLLQ_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 8 */ /** * @} @@ -780,37 +769,37 @@ typedef struct /** @defgroup RCC_LL_EC_PLLSAI1P PLLSAI1 division factor (PLLP) * @{ */ -#define LL_RCC_PLLSAI1P_DIV_2 (RCC_PLLSAI1CFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ -#define LL_RCC_PLLSAI1P_DIV_3 (RCC_PLLSAI1CFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ -#define LL_RCC_PLLSAI1P_DIV_4 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ -#define LL_RCC_PLLSAI1P_DIV_5 (RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ -#define LL_RCC_PLLSAI1P_DIV_6 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ -#define LL_RCC_PLLSAI1P_DIV_7 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ -#define LL_RCC_PLLSAI1P_DIV_8 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2)/*!< Main PLL division factor for PLLP output by 8 */ -#define LL_RCC_PLLSAI1P_DIV_9 (RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ -#define LL_RCC_PLLSAI1P_DIV_10 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ -#define LL_RCC_PLLSAI1P_DIV_11 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ -#define LL_RCC_PLLSAI1P_DIV_12 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 12 */ -#define LL_RCC_PLLSAI1P_DIV_13 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ -#define LL_RCC_PLLSAI1P_DIV_14 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 14 */ -#define LL_RCC_PLLSAI1P_DIV_15 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 15 */ -#define LL_RCC_PLLSAI1P_DIV_16 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3)/*!< Main PLL division factor for PLLP output by 16 */ -#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ -#define LL_RCC_PLLSAI1P_DIV_18 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ -#define LL_RCC_PLLSAI1P_DIV_19 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ -#define LL_RCC_PLLSAI1P_DIV_20 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 20 */ -#define LL_RCC_PLLSAI1P_DIV_21 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ -#define LL_RCC_PLLSAI1P_DIV_22 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 22 */ -#define LL_RCC_PLLSAI1P_DIV_23 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 23 */ -#define LL_RCC_PLLSAI1P_DIV_24 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 24 */ -#define LL_RCC_PLLSAI1P_DIV_25 (RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ -#define LL_RCC_PLLSAI1P_DIV_26 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 26 */ -#define LL_RCC_PLLSAI1P_DIV_27 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 27*/ -#define LL_RCC_PLLSAI1P_DIV_28 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 28 */ -#define LL_RCC_PLLSAI1P_DIV_29 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 29 */ -#define LL_RCC_PLLSAI1P_DIV_30 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 30 */ -#define LL_RCC_PLLSAI1P_DIV_31 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 31 */ -#define LL_RCC_PLLSAI1P_DIV_32 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4)/*!< Main PLL division factor for PLLP output by 32 */ +#define LL_RCC_PLLSAI1P_DIV_2 (RCC_PLLSAI1CFGR_PLLP_0) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLSAI1P_DIV_3 (RCC_PLLSAI1CFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLSAI1P_DIV_4 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLSAI1P_DIV_5 (RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLSAI1P_DIV_6 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLSAI1P_DIV_7 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLSAI1P_DIV_8 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLSAI1P_DIV_9 (RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLSAI1P_DIV_10 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLSAI1P_DIV_11 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLSAI1P_DIV_12 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLSAI1P_DIV_13 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLSAI1P_DIV_14 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLSAI1P_DIV_15 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLSAI1P_DIV_16 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3) /*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLSAI1P_DIV_18 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLSAI1P_DIV_19 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLSAI1P_DIV_20 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLSAI1P_DIV_21 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLSAI1P_DIV_22 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLSAI1P_DIV_23 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLSAI1P_DIV_24 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLSAI1P_DIV_25 (RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLSAI1P_DIV_26 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLSAI1P_DIV_27 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 27*/ +#define LL_RCC_PLLSAI1P_DIV_28 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLSAI1P_DIV_29 (RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLSAI1P_DIV_30 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLSAI1P_DIV_31 (RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 31 */ +#define LL_RCC_PLLSAI1P_DIV_32 (RCC_PLLSAI1CFGR_PLLP_0|RCC_PLLSAI1CFGR_PLLP_1|RCC_PLLSAI1CFGR_PLLP_2|RCC_PLLSAI1CFGR_PLLP_3|RCC_PLLSAI1CFGR_PLLP_4) /*!< Main PLL division factor for PLLP output by 32 */ /** * @} */ @@ -818,12 +807,12 @@ typedef struct /** @defgroup RCC_LL_EC_PLLSAI1R PLLSAI1 division factor (PLLR) * @{ */ -#define LL_RCC_PLLSAI1R_DIV_2 (RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 2 */ -#define LL_RCC_PLLSAI1R_DIV_3 (RCC_PLLSAI1CFGR_PLLR_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 3 */ -#define LL_RCC_PLLSAI1R_DIV_4 (RCC_PLLSAI1CFGR_PLLR_1 | RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 4 */ -#define LL_RCC_PLLSAI1R_DIV_5 (RCC_PLLSAI1CFGR_PLLR_2) /*!< PLLSAI1 division factor for PLLSAI1R output by 5 */ -#define LL_RCC_PLLSAI1R_DIV_6 (RCC_PLLSAI1CFGR_PLLR_2 | RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 6 */ -#define LL_RCC_PLLSAI1R_DIV_7 (RCC_PLLSAI1CFGR_PLLR_2 | RCC_PLLSAI1CFGR_PLLR_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 7 */ +#define LL_RCC_PLLSAI1R_DIV_2 (RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 2 */ +#define LL_RCC_PLLSAI1R_DIV_3 (RCC_PLLSAI1CFGR_PLLR_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 3 */ +#define LL_RCC_PLLSAI1R_DIV_4 (RCC_PLLSAI1CFGR_PLLR_1 | RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 4 */ +#define LL_RCC_PLLSAI1R_DIV_5 (RCC_PLLSAI1CFGR_PLLR_2) /*!< PLLSAI1 division factor for PLLSAI1R output by 5 */ +#define LL_RCC_PLLSAI1R_DIV_6 (RCC_PLLSAI1CFGR_PLLR_2 | RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 6 */ +#define LL_RCC_PLLSAI1R_DIV_7 (RCC_PLLSAI1CFGR_PLLR_2 | RCC_PLLSAI1CFGR_PLLR_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 7 */ #define LL_RCC_PLLSAI1R_DIV_8 (RCC_PLLSAI1CFGR_PLLR_2 | RCC_PLLSAI1CFGR_PLLR_1 | RCC_PLLSAI1CFGR_PLLR_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 8 */ /** * @} @@ -998,59 +987,6 @@ typedef struct #define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) -#if defined(SPI_I2S_SUPPORT) -/** - * @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain - * @note ex: @ref __LL_RCC_CALC_PLLCLK_I2S_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), - * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); - * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI) - * @param __PLLM__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLM_DIV_1 - * @arg @ref LL_RCC_PLLM_DIV_2 - * @arg @ref LL_RCC_PLLM_DIV_3 - * @arg @ref LL_RCC_PLLM_DIV_4 - * @arg @ref LL_RCC_PLLM_DIV_5 - * @arg @ref LL_RCC_PLLM_DIV_6 - * @arg @ref LL_RCC_PLLM_DIV_7 - * @arg @ref LL_RCC_PLLM_DIV_8 - * @param __PLLN__ Between Min_Data = 8 and Max_Data = 86 - * @param __PLLP__ This parameter can be one of the following values: - * @arg @ref LL_RCC_PLLP_DIV_2 - * @arg @ref LL_RCC_PLLP_DIV_3 - * @arg @ref LL_RCC_PLLP_DIV_4 - * @arg @ref LL_RCC_PLLP_DIV_5 - * @arg @ref LL_RCC_PLLP_DIV_6 - * @arg @ref LL_RCC_PLLP_DIV_7 - * @arg @ref LL_RCC_PLLP_DIV_8 - * @arg @ref LL_RCC_PLLP_DIV_9 - * @arg @ref LL_RCC_PLLP_DIV_10 - * @arg @ref LL_RCC_PLLP_DIV_11 - * @arg @ref LL_RCC_PLLP_DIV_12 - * @arg @ref LL_RCC_PLLP_DIV_13 - * @arg @ref LL_RCC_PLLP_DIV_14 - * @arg @ref LL_RCC_PLLP_DIV_15 - * @arg @ref LL_RCC_PLLP_DIV_16 - * @arg @ref LL_RCC_PLLP_DIV_17 - * @arg @ref LL_RCC_PLLP_DIV_18 - * @arg @ref LL_RCC_PLLP_DIV_19 - * @arg @ref LL_RCC_PLLP_DIV_20 - * @arg @ref LL_RCC_PLLP_DIV_21 - * @arg @ref LL_RCC_PLLP_DIV_22 - * @arg @ref LL_RCC_PLLP_DIV_23 - * @arg @ref LL_RCC_PLLP_DIV_24 - * @arg @ref LL_RCC_PLLP_DIV_25 - * @arg @ref LL_RCC_PLLP_DIV_26 - * @arg @ref LL_RCC_PLLP_DIV_27 - * @arg @ref LL_RCC_PLLP_DIV_28 - * @arg @ref LL_RCC_PLLP_DIV_29 - * @arg @ref LL_RCC_PLLP_DIV_30 - * @arg @ref LL_RCC_PLLP_DIV_31 - * @arg @ref LL_RCC_PLLP_DIV_32 - * @retval PLL clock frequency (in Hz) - */ -#define __LL_RCC_CALC_PLLCLK_I2S_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \ - (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U)) -#endif /** * @brief Helper macro to calculate the PLLQCLK frequency used on 48M domain @@ -1362,28 +1298,6 @@ __STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) SET_BIT(RCC->CR, RCC_CR_CSSON); } -#if defined(RCC_CR_HSEBYP) -/** - * @brief Enable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) -{ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); -} - -/** - * @brief Disable HSE external oscillator (HSE Bypass) - * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass - * @retval None - */ -__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) -{ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); -} -#endif - /** * @brief Enable HSE crystal oscillator (HSE ON) * @rmtoll CR HSEON LL_RCC_HSE_Enable @@ -1635,6 +1549,7 @@ __STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) * @} */ +#if defined(RCC_HSI48_SUPPORT) /** @defgroup RCC_LL_EF_HSI48 HSI48 * @{ */ @@ -1682,6 +1597,7 @@ __STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) /** * @} */ +#endif /** @defgroup RCC_LL_EF_LSE LSE * @{ @@ -2164,9 +2080,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetRFClockSource(void) * @param Source This parameter can be one of the following values: * @arg @ref LL_RCC_RFWKP_CLKSOURCE_NONE * @arg @ref LL_RCC_RFWKP_CLKSOURCE_LSE - * @arg @ref LL_RCC_RFWKP_CLKSOURCE_LSI (*) * @arg @ref LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024 - * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_SetRFWKPClockSource(uint32_t Source) @@ -2180,9 +2094,7 @@ __STATIC_INLINE void LL_RCC_SetRFWKPClockSource(uint32_t Source) * @retval Returned value can be one of the following values: * @arg @ref LL_RCC_RFWKP_CLKSOURCE_NONE * @arg @ref LL_RCC_RFWKP_CLKSOURCE_LSE - * @arg @ref LL_RCC_RFWKP_CLKSOURCE_LSI (*) * @arg @ref LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024 - * @note (*) Value not defined for all devices */ __STATIC_INLINE uint32_t LL_RCC_GetRFWKPClockSource(void) { @@ -2536,7 +2448,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetSMPSPrescaler(void) * @arg @ref LL_RCC_MCO1SOURCE_MSI * @arg @ref LL_RCC_MCO1SOURCE_HSI * @arg @ref LL_RCC_MCO1SOURCE_HSE - * @arg @ref LL_RCC_MCO1SOURCE_HSI48 + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK * @arg @ref LL_RCC_MCO1SOURCE_LSI1 * @arg @ref LL_RCC_MCO1SOURCE_LSI2 @@ -2548,6 +2460,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetSMPSPrescaler(void) * @arg @ref LL_RCC_MCO1_DIV_4 * @arg @ref LL_RCC_MCO1_DIV_8 * @arg @ref LL_RCC_MCO1_DIV_16 + * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) @@ -2602,9 +2515,10 @@ __STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI (*) + * @note (*) Value not defined for all devices * @retval None */ __STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) @@ -2667,7 +2581,7 @@ __STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) * @brief Configure CLK48 clock source * @rmtoll CCIPR CLK48SEL LL_RCC_SetCLK48ClockSource * @param CLK48xSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI @@ -2707,7 +2621,7 @@ __STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) * @arg @ref LL_RCC_RNG_CLKSOURCE_LSI * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE * @param CLK48xSource This parameter can be one of the following values: - * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI @@ -2732,6 +2646,7 @@ __STATIC_INLINE void LL_RCC_ConfigRNGClockSource(uint32_t RNGxSource, uint32_t C * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI (*) * @note (*) Value not defined for all devices * @retval None */ @@ -2740,22 +2655,6 @@ __STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); } -#if defined(SPI_I2S_SUPPORT) -/** - * @brief Configure I2Sx clock source - * @rmtoll CCIPR I2SSEL LL_RCC_SetI2SClockSource - * @param I2SxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S_CLKSOURCE_NONE - * @arg @ref LL_RCC_I2S_CLKSOURCE_PLL - * @arg @ref LL_RCC_I2S_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN - * @retval None - */ -__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource) -{ - MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2SSEL, I2SxSource); -} -#endif /** * @brief Get USARTx clock source @@ -2801,9 +2700,10 @@ __STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 - * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK - * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI (*) + * @note (*) Value not defined for all devices */ __STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) { @@ -2870,7 +2770,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) * @param CLK48x This parameter can be one of the following values: * @arg @ref LL_RCC_CLK48_CLKSOURCE * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_CLK48_CLKSOURCE_HSI48 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_CLK48_CLKSOURCE_PLL * @arg @ref LL_RCC_CLK48_CLKSOURCE_MSI @@ -2909,6 +2809,7 @@ __STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_ADC_CLKSOURCE_HSI (*) * @note (*) Value not defined for all devices */ __STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) @@ -2916,23 +2817,6 @@ __STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); } -#if defined(SPI_I2S_SUPPORT) -/** - * @brief Get I2Sx clock source - * @rmtoll CCIPR I2SSEL LL_RCC_GetI2SClockSource - * @param I2Sx This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S_CLKSOURCE - * @retval Returned value can be one of the following values: - * @arg @ref LL_RCC_I2S_CLKSOURCE_NONE - * @arg @ref LL_RCC_I2S_CLKSOURCE_PLL - * @arg @ref LL_RCC_I2S_CLKSOURCE_HSI - * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN - */ -__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx) -{ - return (uint32_t)(READ_BIT(RCC->CCIPR, I2Sx)); -} -#endif /** * @} */ @@ -3920,6 +3804,7 @@ __STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); } +#if defined(RCC_HSI48_SUPPORT) /** * @brief Clear HSI48 ready interrupt flag * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY @@ -3929,6 +3814,7 @@ __STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) { SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); } +#endif #if defined(SAI1) /** @@ -4032,6 +3918,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); } +#if defined(RCC_HSI48_SUPPORT) /** * @brief Check if HSI48 ready interrupt occurred or not * @rmtoll CIFR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY @@ -4041,6 +3928,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) { return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); } +#endif #if defined(SAI1) /** @@ -4282,6 +4170,7 @@ __STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); } +#if defined(RCC_HSI48_SUPPORT) /** * @brief Enable HSI48 ready interrupt * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY @@ -4291,6 +4180,7 @@ __STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) { SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); } +#endif #if defined(SAI1) /** @@ -4383,6 +4273,7 @@ __STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); } +#if defined(RCC_HSI48_SUPPORT) /** * @brief Disable HSI48 ready interrupt * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY @@ -4392,6 +4283,7 @@ __STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) { CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); } +#endif #if defined(SAI1) /** @@ -4484,6 +4376,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) return ((READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE)) ? 1UL : 0UL); } +#if defined(RCC_HSI48_SUPPORT) /** * @brief Checks if HSI48 ready interrupt source is enabled or disabled. * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY @@ -4493,6 +4386,7 @@ __STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) { return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE)) ? 1UL : 0UL); } +#endif #if defined(SAI1) /** @@ -4553,9 +4447,6 @@ uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); uint32_t LL_RCC_GetRTCClockFreq(void); uint32_t LL_RCC_GetRFWKPClockFreq(void); -#if defined(SPI_I2S_SUPPORT) -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource); -#endif /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h index 72788ee563..7e6d32f8ac 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_rtc.h @@ -334,14 +334,16 @@ typedef struct * @} */ +#if defined(RTC_OR_ALARMOUTTYPE) /** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE * @{ */ -#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN 0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN 0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */ #define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL RTC_OR_ALARMOUTTYPE /*!< RTC_ALARM, when mapped on PC13, is push-pull output */ /** * @} */ +#endif /** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN * @{ @@ -830,6 +832,7 @@ __STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); } +#if defined(RTC_OR_ALARMOUTTYPE) /** * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) * @note Used only when RTC_ALARM is mapped on PC13 @@ -858,6 +861,7 @@ __STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) { return (uint32_t)(READ_BIT(RTCx->OR, RTC_OR_ALARMOUTTYPE)); } +#endif /** * @brief Enable initialization mode diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h index 4ef071757a..1aa584d9da 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_tim.h @@ -127,7 +127,11 @@ static const uint8_t SHIFT_TAB_OISx[] = #define TIMx_OR_RMP_SHIFT 16U #define TIMx_OR_RMP_MASK 0x0000FFFFU #define TIM1_OR_RMP_MASK ((TIM1_OR_ETR_ADC1_RMP | TIM1_OR_TI1_RMP) << TIMx_OR_RMP_SHIFT) +#if defined(USB) #define TIM2_OR_RMP_MASK ((TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP | TIM2_OR_ITR1_RMP) << TIMx_OR_RMP_SHIFT) +#else +#define TIM2_OR_RMP_MASK ((TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP) << TIMx_OR_RMP_SHIFT) +#endif #if defined(TIM16) #define TIM16_OR_RMP_MASK (TIM16_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) #endif /* TIM16 */ @@ -598,8 +602,8 @@ typedef struct /** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode * @{ */ -#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */ -#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ /** * @} */ @@ -1544,7 +1548,16 @@ __STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMo */ __STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) { - return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS)); + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; } /** @@ -1999,8 +2012,8 @@ __STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t */ __STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); @@ -2044,8 +2057,8 @@ __STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, */ __STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); } @@ -2083,8 +2096,8 @@ __STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint */ __STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); } @@ -2117,7 +2130,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) */ __STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); } @@ -2149,7 +2162,7 @@ __STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, */ __STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); } @@ -2186,7 +2199,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Chann */ __STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); } @@ -2218,7 +2231,7 @@ __STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, */ __STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); } @@ -2243,8 +2256,8 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Chan */ __STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); } @@ -2269,8 +2282,8 @@ __STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) */ __STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); } @@ -2295,9 +2308,9 @@ __STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) */ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); } @@ -2321,8 +2334,8 @@ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Cha */ __STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); } @@ -2346,8 +2359,8 @@ __STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel */ __STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); } @@ -2371,9 +2384,9 @@ __STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channe */ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); } @@ -2400,8 +2413,8 @@ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t */ __STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); } @@ -2427,8 +2440,8 @@ __STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) */ __STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); } @@ -2456,9 +2469,9 @@ __STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) */ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); - uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); } @@ -2727,8 +2740,8 @@ __STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t G */ __STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]); MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), @@ -2755,8 +2768,8 @@ __STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint3 */ __STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); } @@ -2779,8 +2792,8 @@ __STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channe */ __STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); } @@ -2805,8 +2818,8 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Ch */ __STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); } @@ -2830,8 +2843,8 @@ __STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, */ __STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); } @@ -2868,8 +2881,8 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Chan */ __STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); } @@ -2905,8 +2918,8 @@ __STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, ui */ __STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); - const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); } @@ -2934,7 +2947,7 @@ __STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel */ __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), ICPolarity << SHIFT_TAB_CCxP[iChannel]); } @@ -2962,7 +2975,7 @@ __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, */ __STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) { - uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); } @@ -3361,7 +3374,6 @@ __STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, u */ __STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) { - MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); } @@ -3700,7 +3712,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) */ __STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) { - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); SET_BIT(*pReg, Source); } @@ -3728,7 +3740,7 @@ __STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t B */ __STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) { - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); CLEAR_BIT(*pReg, Source); } @@ -3760,7 +3772,7 @@ __STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t __STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, uint32_t Polarity) { - __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); MODIFY_REG(*pReg, (TIMx_AF1_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE)); } /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h index ad2e901dbc..c5db29c7c1 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_usb.h @@ -118,6 +118,10 @@ typedef struct uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ + + uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ + } USB_EPTypeDef; @@ -131,10 +135,10 @@ typedef struct /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS * @{ */ -#define DEP0CTL_MPS_64 0U -#define DEP0CTL_MPS_32 1U -#define DEP0CTL_MPS_16 2U -#define DEP0CTL_MPS_8 3U +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U /** * @} */ @@ -183,32 +187,28 @@ HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num); + +#if defined (HAL_PCD_MODULE_ENABLED) HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); -void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); +#endif + HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); uint32_t USB_ReadInterrupts(USB_TypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); -void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); - HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); -void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); -void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); + +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, + uint16_t wPMABufAddr, uint16_t wNBytes); /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Release_Notes.html b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Release_Notes.html new file mode 100644 index 0000000000..e91f65980f --- /dev/null +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Release_Notes.html @@ -0,0 +1,729 @@ +<!DOCTYPE html> +<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> +<head> + <meta charset="utf-8" /> + <meta name="generator" content="pandoc" /> + <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" /> + <title>Release Notes for STM32WBxx HAL Drivers</title> + <style type="text/css"> + code{white-space: pre-wrap;} + span.smallcaps{font-variant: small-caps;} + span.underline{text-decoration: underline;} + div.column{display: inline-block; vertical-align: top; width: 50%;} + </style> + <link rel="stylesheet" href="_htmresc/mini-st.css" /> + <!--[if lt IE 9]> + <script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script> + <![endif]--> +</head> +<body> +<div class="row"> +<div class="col-sm-12 col-lg-4"> +<div class="card fluid"> +<div class="sectione dark"> +<center> +<h1 id="release-notes-for-stm32wbxx-hal-drivers"><small>Release Notes for</small> STM32WBxx HAL Drivers</h1> +<p>Copyright © 2019 STMicroelectronics<br /> +</p> +<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a> +</center> +</div> +</div> +<h1 id="license">License</h1> +<p>This software component is licensed by ST under BSD 3-Clause license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:</p> +<p><a href="https://opensource.org/licenses/BSD-3-Clause">https://opensource.org/licenses/BSD-3-Clause</a></p> +<h1 id="purpose">Purpose</h1> +<p>The STM32Cube HAL and LL, an STM32 abstraction layer embedded software, ensure maximized portability across STM32 portfolio.</p> +<p>The Portable APIs layer provides a generic, multi instanced and simple set of APIs to interact with the upper layer (application, libraries and stacks). It is composed of native and extended APIs set. It is directly built around a generic architecture and allows the build-upon layers, like the middleware layer, to implement its functions without knowing in-depth the used STM32 device. This improves the library code reusability and guarantees an easy portability on other devices and STM32 families.</p> +<p>The Low Layer (LL) drivers are part of the STM32Cube firmware HAL that provide basic set of optimized and one shot services. The Low layer drivers, contrary to the HAL ones are not Fully Portable across the STM32 families; the availability of some functions depend on the physical availability of the relative features on the product. The Low Layer (LL) drivers are designed to offer the following features:</p> +<ul> +<li>New set of inline function for direct and atomic register access</li> +<li>One-shot operations that can be used by the HAL drivers or from application level.</li> +<li>Fully Independant from HAL and can be used in standalone usage (without HAL drivers)</li> +<li>Full features coverage of the all the supported peripherals.</li> +</ul> +</div> +<div class="col-sm-12 col-lg-8"> +<h1 id="update-history">Update History</h1> +<div class="collapse"> +<input type="checkbox" id="collapse-section9" checked aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">v1.8.0 / 12-February-2021</label> +<div> +<h2 id="main-changes">Main Changes</h2> +<h3 id="add-support-for-stm32wb15xx-and-stm32wb10xx">Add support for STM32WB15xx and STM32WB10xx</h3> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>generic</td> +<td style="text-align: left;">Prevent redefinition of UNUSED macro</td> +</tr> +<tr class="even"> +<td>generic</td> +<td style="text-align: left;">Add support of Keil V6</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Fix device ISO IN double buffer mode</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Remove duplication of PCD_GET_EP_RX_CNT define</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Fix PMA rx count descriptor update</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Fix HAL_PCD_EP_Open indentation</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Rework device start and stop</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Remove register keyword as no more supported by c++ compiler</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Fix double buffer mode</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Fix Enabling ULPI interface</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Arrays are now declared as static const</td> +</tr> +<tr class="even"> +<td>UART</td> +<td style="text-align: left;">Add a HAL UART service to enable RTO interrupt</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Implement HAL UART enhanced reception services (ReceptionToIdle)</td> +</tr> +<tr class="even"> +<td>UART</td> +<td style="text-align: left;">Fix typos introduced in UART State definition description</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Fix invalid CR1 init in UART_SetConfig() and SMARTCARD_SetConfig()</td> +</tr> +<tr class="even"> +<td>TIMER</td> +<td style="text-align: left;">Correct timeout vulnerability</td> +</tr> +<tr class="odd"> +<td>TIMER</td> +<td style="text-align: left;">Correct counter value latch delay at high frequency</td> +</tr> +<tr class="even"> +<td>TIMER</td> +<td style="text-align: left;">Correct error: “LL_TIM_TS_ITR11” is undefined</td> +</tr> +<tr class="odd"> +<td>TIMER</td> +<td style="text-align: left;">Correct LL_TIM_E_TestLL_TIM_SetRemap</td> +</tr> +<tr class="even"> +<td>TIMER</td> +<td style="text-align: left;">Correct HAL_TIM_OnePulse_Start ignoring OutputChannel parameter leading to unexpected behavior</td> +</tr> +<tr class="odd"> +<td>TIMER</td> +<td style="text-align: left;">Correct ONEPULSEMODE defines. Descriptions were inverted</td> +</tr> +<tr class="even"> +<td>TIMER</td> +<td style="text-align: left;">Fix MISRA errors</td> +</tr> +<tr class="odd"> +<td>TIMER</td> +<td style="text-align: left;">Correct the return value of LL_TIM_GetCounterMode</td> +</tr> +<tr class="even"> +<td>LPTIM</td> +<td style="text-align: left;">Correct MISRAC2012-Rule-8.3_b: Declaration/definition of HAL_LPTIM_RegisterCallback is inconsistent with previous declaration</td> +</tr> +<tr class="odd"> +<td>LPTIM</td> +<td style="text-align: left;">Fix external clock configuration (was incomplete for some ClockSource/CounterSource combinations)</td> +</tr> +<tr class="even"> +<td>ADC</td> +<td style="text-align: left;">Correct timeout vulnerability</td> +</tr> +<tr class="odd"> +<td>ADC</td> +<td style="text-align: left;">Increase internal regulator stabilization time from 10us to 20us</td> +</tr> +<tr class="even"> +<td>COMP</td> +<td style="text-align: left;">Correct timeout vulnerability</td> +</tr> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Correct official NIST CCM test pattern enciphering failing when header length is null</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">Correct HAL_CRYP_SetConfig not storing the content of KeyIVConfigSkip</td> +</tr> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Correct the GCM decryption in interrupt mode</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">v1.7.0 / 30-October-2020</label> +<div> +<h2 id="main-changes-1">Main Changes</h2> +<h3 id="maitenance-release">Maitenance release</h3> +<p>All peripheral</p> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Add precision on data types</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">AES GCM: handling of AUD with size not multiple of 4 bytes not properly handle in CRYP_AESGCM_Process_IT</td> +</tr> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Fix CRYP HAL driver to manage GCM header lengths not multiple of 4 bytes in 8-bit, 16-bit and 32-bit data types.</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">Update to be able to manage GCM/GMAC/CCM header feed in DMA mode</td> +</tr> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Fix the enciphering issue and pass all the official NIST CCM test patterns.</td> +</tr> +<tr class="even"> +<td>EXTI</td> +<td style="text-align: left;">Replace reserved word __LINE__ by __EXTI_LINE__</td> +</tr> +<tr class="odd"> +<td>EXTI</td> +<td style="text-align: left;">Add missing line 46 to LL_EXTI_LINE_ALL_32_63</td> +</tr> +<tr class="even"> +<td>I2C</td> +<td style="text-align: left;">Refactor documentation</td> +</tr> +<tr class="odd"> +<td>PWR</td> +<td style="text-align: left;">Remove ‘register’ storage class specifier</td> +</tr> +<tr class="even"> +<td>RCC</td> +<td style="text-align: left;">HSE bypass related API must be removed from RCC LL/HAL drivers</td> +</tr> +<tr class="odd"> +<td>RCC</td> +<td style="text-align: left;">LSI is no longer a source for RF WUP</td> +</tr> +<tr class="even"> +<td>RCC</td> +<td style="text-align: left;">SystemCoreClockUpdate shall not be called by the HAL</td> +</tr> +<tr class="odd"> +<td>TIM</td> +<td style="text-align: left;">Add HAL_TIM_DMABurst_MultiWriteStart and HAL_TIM_DMABurst_MultiReadStart to support multiple DMA bursts.</td> +</tr> +<tr class="even"> +<td>TIM</td> +<td style="text-align: left;">Minor correction to fix warnings</td> +</tr> +<tr class="odd"> +<td>WWDG</td> +<td style="text-align: left;">Correct driver description</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-1">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">v1.6.0 / 05-June-2020</label> +<div> +<h2 id="main-changes-2">Main Changes</h2> +<h3 id="maitenance-release-1">Maitenance release</h3> +<p>All peripheral</p> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>All</td> +<td style="text-align: left;">Remove ‘register’ storage class specifier</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">AES GCM: Add support data encrypt/decrypt with length not multiple of 16 bytes</td> +</tr> +<tr class="odd"> +<td>DMA</td> +<td style="text-align: left;">LOCK UNLOCK process to modify, as LOCK is done at Start and UNLOCK is done at Completion processus</td> +</tr> +<tr class="even"> +<td>DMA</td> +<td style="text-align: left;">Correct the computation for DMAMUX overrun IT mask</td> +</tr> +<tr class="odd"> +<td>GPIO</td> +<td style="text-align: left;">Correct bug on HAL_GPIO_TogglePin and LL_GPIO_TogglePin to allow to toggle multiple pin</td> +</tr> +<tr class="even"> +<td>I2C</td> +<td style="text-align: left;">Sequential transfer MAX_NBYTE_SIZE correspond to no reload</td> +</tr> +<tr class="odd"> +<td>SPI</td> +<td style="text-align: left;">problematic timeout management inside SPI DMA xfer complete handler (interrupt context)</td> +</tr> +<tr class="even"> +<td>SPI</td> +<td style="text-align: left;">Issue in 3wires communication (Need Disable / Enable SPI)</td> +</tr> +<tr class="odd"> +<td>IWDG</td> +<td style="text-align: left;">Correct the IWDG start-up timeout (insufficiently low)</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Improve OUT EP re-enable with double buffering</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Add workaround for unexpected USB wakeup during stop mode</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Clear unexpected wakeup during suspend IT</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Adjust IO address access to be volatile</td> +</tr> +<tr class="even"> +<td>USB</td> +<td style="text-align: left;">Manage IN isoc IN transfer complete interrupt</td> +</tr> +<tr class="odd"> +<td>RTC</td> +<td style="text-align: left;">Issue on macro when clearing or getting flag TAMP, TIMESTAMP in EXTI</td> +</tr> +<tr class="even"> +<td>SAI</td> +<td style="text-align: left;">Issue with ‘register’ storage class specifier, should be removed</td> +</tr> +<tr class="odd"> +<td>SMARTCARD</td> +<td style="text-align: left;">No repetition after NACK is received in smartcard T=0</td> +</tr> +<tr class="even"> +<td>SMARTCARD</td> +<td style="text-align: left;">Improve doxygen visual result</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Rework BRR register value computation in HAL_UART_Init() for ROM size gain</td> +</tr> +<tr class="even"> +<td>Utils</td> +<td style="text-align: left;">Align package information to RM0434</td> +</tr> +<tr class="odd"> +<td>Utils</td> +<td style="text-align: left;">Turn UTILS_SetFlashLatency() into LL_SetFlashLatency() public function</td> +</tr> +<tr class="even"> +<td>TIM</td> +<td style="text-align: left;">Order of disabling in HAL_TIM_IC_Stop_DMA function</td> +</tr> +<tr class="odd"> +<td>TIM</td> +<td style="text-align: left;">COUNTERMODE defines are inverted for TIM_CR1_CMS in ll_tim.h</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-2">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">v1.5.0 / 12-February-2020</label> +<div> +<h2 id="main-changes-3">Main Changes</h2> +<h3 id="introduction-of-stm32wb5m-stm32wb35xx-and-stm32wb30xx-product">Introduction of STM32WB5M, STM32WB35xx and STM32WB30xx product</h3> +<p>This release introduce the support of STM32WB5Mxx, STM32WB35xx product and its value line STM32WB30xx.</p> +<p>Added features:</p> +<ul> +<li>Introduction of STM32WB35xx.</li> +</ul> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>HAL/LL</td> +<td style="text-align: left;">VREFBUF trimming calibration must be written by software</td> +</tr> +<tr class="even"> +<td>HAL</td> +<td style="text-align: left;">HAL_SetTickFreq() should update frequency on Systick_LOAD register and uwTickFreq correctly</td> +</tr> +<tr class="odd"> +<td>GPIO</td> +<td style="text-align: left;">LL_GPIO_Init() generate undesired pulse</td> +</tr> +<tr class="even"> +<td>I2C</td> +<td style="text-align: left;">HardFault in I2C_DMAXferCplt</td> +</tr> +<tr class="odd"> +<td>I2C</td> +<td style="text-align: left;">Incorrectly enable interrupts in I2C_Enable_IRQ routine when InterruptRequest = I2C_XFER_CPLT_IT</td> +</tr> +<tr class="even"> +<td>RCC</td> +<td style="text-align: left;">Cannot enable PLL if PLL OFF with identical PLL config</td> +</tr> +<tr class="odd"> +<td>RCC</td> +<td style="text-align: left;">Clock reconfiguration issues once PLLSAI used</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-3">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">v1.4.0 / 15-December-2019</label> +<div> +<h2 id="main-changes-4">Main Changes</h2> +<h3 id="maitenance-release-2">Maitenance release</h3> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Correct suspend and resume operation with a different parameter size.</td> +</tr> +<tr class="even"> +<td>I2C</td> +<td style="text-align: left;">Correct MISRA error. The value assigned to variable tmpITFlags was never used.</td> +</tr> +<tr class="odd"> +<td>I2C</td> +<td style="text-align: left;">Correct I2C slave interrupt handling issue.</td> +</tr> +<tr class="even"> +<td>IPCC</td> +<td style="text-align: left;">Add LL_IPCC_GetChannelNumber API which return the number of channel supported by the device.</td> +</tr> +<tr class="odd"> +<td>LPTIM</td> +<td style="text-align: left;">Correct doxygen group names.</td> +</tr> +<tr class="even"> +<td>PKA</td> +<td style="text-align: left;">Use a macro __PKA_RAM_PARAM_END to clear the last word of any input parameters.</td> +</tr> +<tr class="odd"> +<td>TSC</td> +<td style="text-align: left;">Correct MISRA error related to tag __TSC_HandleTypeDef which is unused.</td> +</tr> +<tr class="even"> +<td>ADC</td> +<td style="text-align: left;">Add two functions to ease configuration of internal channels.</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-4">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +<h2 id="dependencies">Dependencies</h2> +<p>This software release is compatible with:</p> +<p>STM32CubeMX V6.0.0</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">v1.3.0 / 11-September-2019</label> +<div> +<h2 id="main-changes-5">Main Changes</h2> +<h3 id="maitenance-release-3">Maitenance release</h3> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>CRYP</td> +<td style="text-align: left;">Document a restriction regarding size field on HAL_CRYP_Encrypt_DMA, HAL_CRYP_Decrypt_DMA API.</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">Correct several MISRA C:2012 and Code Sonar compliancy improvements.</td> +</tr> +<tr class="odd"> +<td>FLASH</td> +<td style="text-align: left;">Move FLASH_SIZE define from hal flash. h to cmsis device file</td> +</tr> +<tr class="even"> +<td>FLASH</td> +<td style="text-align: left;">Correct ECC management in HAL FLASH driver</td> +</tr> +<tr class="odd"> +<td>FLASH</td> +<td style="text-align: left;">Correct #define in stm32wbxx_hal_flash.h - FLASH_PAGE_NB</td> +</tr> +<tr class="even"> +<td>RCC</td> +<td style="text-align: left;">Correct PLL characteristics</td> +</tr> +<tr class="odd"> +<td>TIMER</td> +<td style="text-align: left;">Add assertion check inside HAL_TIMEx_MasterConfigSynchronization</td> +</tr> +<tr class="even"> +<td>TIMER</td> +<td style="text-align: left;">Make LL_TIM_SetETRSource in line with RM0434</td> +</tr> +<tr class="odd"> +<td>WWDG</td> +<td style="text-align: left;">Correct typical frequency computation description inside the header file</td> +</tr> +<tr class="even"> +<td>IRDA</td> +<td style="text-align: left;">Improve the description of the APIs</td> +</tr> +<tr class="odd"> +<td>SMARTCARD</td> +<td style="text-align: left;">Fix GCC compilation warning</td> +</tr> +<tr class="even"> +<td>UART</td> +<td style="text-align: left;">Correct possible overflow with wordlength = 9bits and NO parity in HAL_UART_Transmit() and HAL_IRDA_Transmit()</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Fix GCC compilation warning</td> +</tr> +<tr class="even"> +<td>USART</td> +<td style="text-align: left;">Correct possible overflow with wordlength = 9bits and NO parity in HAL_UART_Transmit() and HAL_IRDA_Transmit()</td> +</tr> +<tr class="odd"> +<td>USART</td> +<td style="text-align: left;">Fix GCC compilation warning</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-5">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +<h2 id="dependencies-1">Dependencies</h2> +<p>This software release is compatible with:</p> +<p>STM32CubeMX V5.4.0</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.2.0 / 26-June-2019</label> +<div> +<h2 id="main-changes-6">Main Changes</h2> +<h3 id="stm32wb50xx-introduction-and-maintenance-release">STM32WB50xx introduction and maintenance release</h3> +<p>First release for STM32WBxx HAL drivers introducing <strong>stm32wb50xx</strong> devices.</p> +<table> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>RCC</td> +<td style="text-align: left;">Add capabilty to configure RNG clock in one step.</td> +</tr> +<tr class="even"> +<td></td> +<td style="text-align: left;">Before two steps were required: USB clock then RNG clock.</td> +</tr> +<tr class="odd"> +<td></td> +<td style="text-align: left;">Two step method is still supported and compatible.</td> +</tr> +<tr class="even"> +<td>IRDA</td> +<td style="text-align: left;">Avoid using macros with function calls as argument</td> +</tr> +<tr class="odd"> +<td>LPTIM</td> +<td style="text-align: left;">Add polling mechanims to check xxOK flags</td> +</tr> +<tr class="even"> +<td></td> +<td style="text-align: left;">Add new EXTI macros to manage LPTIM wakeup EXTI interrupts</td> +</tr> +<tr class="odd"> +<td>USB</td> +<td style="text-align: left;">Improve ep OUT interrupt handler</td> +</tr> +<tr class="even"> +<td></td> +<td style="text-align: left;">Ensure 16 bit access to USB PMA</td> +</tr> +<tr class="odd"> +<td></td> +<td style="text-align: left;">Enable BCD</td> +</tr> +<tr class="even"> +<td>RNG</td> +<td style="text-align: left;">Add new error definitions</td> +</tr> +<tr class="odd"> +<td>SAI</td> +<td style="text-align: left;">Correct SAI frequency calculation in case of SPDIF output</td> +</tr> +<tr class="even"> +<td>SMARTCARD</td> +<td style="text-align: left;">Avoid using macros with function calls as argument</td> +</tr> +<tr class="odd"> +<td>UART</td> +<td style="text-align: left;">Avoid using macros with function calls as argument</td> +</tr> +<tr class="even"> +<td>USART</td> +<td style="text-align: left;">Avoid using macros with function calls as argument</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-6">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +<h2 id="dependencies-2">Dependencies</h2> +<p>This software release is compatible with:</p> +<p>STM32CubeMX V5.3.0</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 05-April-2019</label> +<div> +<h2 id="main-changes-7">Main Changes</h2> +<h3 id="maintenance-release">Maintenance release</h3> +<p>Maintenance release of HAL and Low layers drivers supporting STM32WB55xx devices.</p> +<table> +<caption>Fixed bugs list</caption> +<thead> +<tr class="header"> +<th>Peripheral</th> +<th style="text-align: left;">Headline</th> +</tr> +</thead> +<tbody> +<tr class="odd"> +<td>COMP</td> +<td style="text-align: left;">Only cosmetic changes</td> +</tr> +<tr class="even"> +<td>CRYP</td> +<td style="text-align: left;">Only changes related to documentation</td> +</tr> +<tr class="odd"> +<td>EXTI</td> +<td style="text-align: left;">Only changes related to documentation</td> +</tr> +<tr class="even"> +<td>FLASH</td> +<td style="text-align: left;">Improve code efficiency</td> +</tr> +<tr class="odd"> +<td>GPIO</td> +<td style="text-align: left;">Improve HAL_GPIO_TogglePin efficiency</td> +</tr> +<tr class="even"> +<td>IWDG</td> +<td style="text-align: left;">Only changes related to documentation</td> +</tr> +<tr class="odd"> +<td>RCC</td> +<td style="text-align: left;">Only changes related to documentation</td> +</tr> +<tr class="even"> +<td>RTC</td> +<td style="text-align: left;">LL_RTC_BAK_GetRegister generates warning on GCC 6.3.1 20170620</td> +</tr> +<tr class="odd"> +<td>TIM</td> +<td style="text-align: left;">Only changes related to documentation</td> +</tr> +<tr class="even"> +<td>TSC</td> +<td style="text-align: left;">Correct __HAL_TSC_GET_GROUP_STATUS which was checking only TSC_GROUP1_IDX</td> +</tr> +</tbody> +</table> +<h2 id="backward-compatibility-7">Backward Compatibility</h2> +<p>This release is compatible with the previous versions.</p> +<h2 id="dependencies-3">Dependencies</h2> +<p>This software release is compatible with:</p> +<p>STM32CubeMX V5.2.0</p> +</div> +</div> +<div class="collapse"> +<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 06-February-2019</label> +<div> +<h2 id="main-changes-8">Main Changes</h2> +<h3 id="first-release">First release</h3> +<p>First official release of HAL (Hardware Abstraction Layer) and LL (Low layers) drivers to support STM32WB55xx.</p> +</div> +</div> +</div> +</div> +<footer class="sticky"> +<p>For complete documentation on STM32WBxx, visit: [<a href="http://www.st.com/stm32wb">www.st.com/stm32wb</a>]</p> +<em>This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.</em> +</footer> +</body> +</html> diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c index bf37f6eb61..d2b6edf7a6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c @@ -56,7 +56,7 @@ * @brief STM32WBxx HAL Driver version number */ #define __STM32WBxx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ -#define __STM32WBxx_HAL_VERSION_SUB1 (0x06U) /*!< [23:16] sub1 version */ +#define __STM32WBxx_HAL_VERSION_SUB1 (0x08U) /*!< [23:16] sub1 version */ #define __STM32WBxx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ #define __STM32WBxx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ #define __STM32WBxx_HAL_VERSION ((__STM32WBxx_HAL_VERSION_MAIN << 24U)\ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c index ecf52d2ad7..404841bc6d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c @@ -3,7 +3,7 @@ * @file stm32wbxx_hal_adc.c * @author MCD Application Team * @brief This file provides firmware functions to manage the following - * functionalities of the Analog to Digital Convertor (ADC) + * functionalities of the Analog to Digital Converter (ADC) * peripheral: * + Initialization and de-initialization functions * ++ Initialization and Configuration of ADC @@ -341,6 +341,11 @@ /* Unit: cycles of CPU clock. */ #define ADC_CONVERSION_TIME_MAX_CPU_CYCLES (653UL * 4096UL * 256UL) /*!< ADC conversion completion time-out value */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Register CHSELR bits corresponding to ranks 2 to 8 . */ +#define ADC_CHSELR_SQ2_TO_SQ8 (ADC_CHSELR_SQ2 | ADC_CHSELR_SQ3 | ADC_CHSELR_SQ4 | ADC_CHSELR_SQ5 | ADC_CHSELR_SQ6 | ADC_CHSELR_SQ7 | ADC_CHSELR_SQ8) +#endif + /** * @} @@ -394,11 +399,15 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) { HAL_StatusTypeDef tmp_hal_status = HAL_OK; - uint32_t tmpCFGR; + uint32_t tmpCFGR = 0UL; uint32_t tmp_adc_reg_is_conversion_on_going; __IO uint32_t wait_loop_index = 0UL; +#if defined (ADC_SUPPORT_2_5_MSPS) + uint32_t tmpCFGR2 = 0UL; +#else uint32_t tmp_adc_is_conversion_on_going_regular; uint32_t tmp_adc_is_conversion_on_going_injected; +#endif /* Check ADC handle */ if (hadc == NULL) @@ -419,6 +428,23 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) assert_param(IS_ADC_EOC_SELECTION(hadc->Init.EOCSelection)); assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoWait)); +#if defined (ADC_SUPPORT_2_5_MSPS) + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.LowPowerAutoPowerOff)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1)); + assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2)); + + assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode)); + + if(hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) + { + assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode)); + + if(hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + } + } +#else assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode)); if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE) @@ -434,6 +460,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) /* DISCEN and CONT bits cannot be set at the same time */ assert_param(!((hadc->Init.DiscontinuousConvMode == ENABLE) && (hadc->Init.ContinuousConvMode == ENABLE))); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Actions performed only if ADC is coming from state reset: */ /* - Initialization of ADC MSP */ @@ -445,8 +472,10 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ +#if !defined (ADC_SUPPORT_2_5_MSPS) hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; /* Legacy weak callback */ hadc->InjectedQueueOverflowCallback = HAL_ADCEx_InjectedQueueOverflowCallback; /* Legacy weak callback */ +#endif hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; /* Legacy weak callback */ hadc->LevelOutOfWindow3Callback = HAL_ADCEx_LevelOutOfWindow3Callback; /* Legacy weak callback */ hadc->EndOfSamplingCallback = HAL_ADCEx_EndOfSamplingCallback; /* Legacy weak callback */ @@ -470,7 +499,10 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) hadc->Lock = HAL_UNLOCKED; } - /* - Exit from deep-power-down mode and ADC voltage regulator enable */ + /* - Exit from deep power-down mode and ADC voltage regulator enable */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Feature "deep power-down" not available on ADC peripheral of this STM32WB device */ +#else if (LL_ADC_IsDeepPowerDownEnabled(hadc->Instance) != 0UL) { /* Disable ADC deep power down mode */ @@ -480,6 +512,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) be relaunched or a previously saved calibration factor re-applied once the ADC voltage regulator is enabled */ } +#endif if (LL_ADC_IsInternalRegulatorEnabled(hadc->Instance) == 0UL) { @@ -489,7 +522,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) /* Note: Variable divided by 2 to compensate partially */ /* CPU processing cycles, scaling in us split to not */ /* exceed 32 bits register capacity and handle low frequency. */ - wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); while (wait_loop_index != 0UL) { wait_loop_index--; @@ -525,6 +558,219 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) HAL_ADC_STATE_REG_BUSY, HAL_ADC_STATE_BUSY_INTERNAL); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Configuration of common ADC parameters */ + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated only when ADC is disabled: */ + /* - Internal voltage regulator (no parameter in HAL ADC init structure) */ + /* - Clock configuration */ + /* - ADC resolution */ + /* Note: If low power mode AutoPowerOff is enabled, ADC enable */ + /* and disable phases are performed automatically by hardware */ + /* (in this case, flag ADC_FLAG_RDY is not set). */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Some parameters of this register are not reset, since they are set */ + /* by other functions and must be kept in case of usage of this */ + /* function on the fly (update of a parameter of ADC_InitTypeDef */ + /* without needing to reconfigure all other ADC groups/channels */ + /* parameters): */ + /* - internal measurement paths: Vbat, temperature sensor, Vref */ + /* (set into HAL_ADC_ConfigChannel() ) */ + + /* Configuration of ADC resolution */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_RES , + hadc->Init.Resolution ); + + /* Configuration of ADC: */ + /* - clock */ + /* - oversampling enable */ + /* - oversampling ratio */ + /* - oversampling shift */ + /* - oversampling discontinuous mode (triggered mode) */ + /* - trigger frequency mode */ + tmpCFGR2 |= ( (hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) | + hadc->Init.TriggerFrequencyMode + ); + + MODIFY_REG(hadc->Instance->CFGR2, + ADC_CFGR2_CKMODE | + ADC_CFGR2_LFTRIG , + tmpCFGR2 ); + + /* Configuration of ADC clock mode: asynchronous clock source */ + /* with selectable prescaler. */ + if (((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV1) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV2) && + ((hadc->Init.ClockPrescaler) != ADC_CLOCK_SYNC_PCLK_DIV4)) + { + MODIFY_REG(ADC1_COMMON->CCR , + ADC_CCR_PRESC , + hadc->Init.ClockPrescaler & ADC_CCR_PRESC ); + } + } + + /* Configuration of ADC: */ + /* - discontinuous mode */ + /* - LowPowerAutoWait mode */ + /* - LowPowerAutoPowerOff mode */ + /* - continuous conversion mode */ + /* - overrun */ + /* - external trigger to start conversion */ + /* - external trigger polarity */ + /* - data alignment */ + /* - resolution */ + /* - scan direction */ + /* - DMA continuous request */ + tmpCFGR |= (ADC_CFGR_AUTOWAIT((uint32_t)hadc->Init.LowPowerAutoWait) | + ADC_CFGR_AUTOOFF((uint32_t)hadc->Init.LowPowerAutoPowerOff) | + ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + ADC_CFGR_OVERRUN(hadc->Init.Overrun) | + hadc->Init.DataAlign | + ADC_SCAN_SEQ_MODE(hadc->Init.ScanConvMode) | + ADC_CFGR_DMACONTREQ((uint32_t)hadc->Init.DMAContinuousRequests) ); + + /* Update setting of discontinuous mode only if continuous mode is disabled */ + if (hadc->Init.DiscontinuousConvMode == ENABLE) + { + if (hadc->Init.ContinuousConvMode == DISABLE) + { + /* Enable the selected ADC group regular discontinuous mode */ + tmpCFGR |= ADC_CFGR1_DISCEN; + } + else + { + /* ADC regular group discontinuous was intended to be enabled, */ + /* but ADC regular group modes continuous and sequencer discontinuous */ + /* cannot be enabled simultaneously. */ + + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + + /* Enable external trigger if trigger selection is different of software */ + /* start. */ + /* Note: This configuration keeps the hardware feature of parameter */ + /* ExternalTrigConvEdge "trigger edge none" equivalent to */ + /* software start. */ + if (hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START) + { + tmpCFGR |= ( (hadc->Init.ExternalTrigConv & ADC_CFGR1_EXTSEL) | + hadc->Init.ExternalTrigConvEdge ); + } + + /* Update ADC configuration register with previous settings */ + MODIFY_REG(hadc->Instance->CFGR1, + ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | + ADC_CFGR1_WAIT | + ADC_CFGR1_CONT | + ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTSEL | + ADC_CFGR1_EXTEN | + ADC_CFGR1_ALIGN | + ADC_CFGR1_SCANDIR | + ADC_CFGR1_DMACFG , + tmpCFGR ); + + /* Channel sampling time configuration */ + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_1, hadc->Init.SamplingTimeCommon1); + LL_ADC_SetSamplingTimeCommonChannels(hadc->Instance, LL_ADC_SAMPLINGTIME_COMMON_2, hadc->Init.SamplingTimeCommon2); + + /* Configuration of regular group sequencer: */ + /* - if scan mode is disabled, regular channels sequence length is set to */ + /* 0x00: 1 channel converted (channel on regular rank 1) */ + /* Parameter "NbrOfConversion" is discarded. */ + /* Note: Scan mode is not present by hardware on this device, but */ + /* emulated by software for alignment over all STM32 devices. */ + /* - if scan mode is enabled, regular channels sequence length is set to */ + /* parameter "NbrOfConversion". */ + /* Channels must be configured into each rank using function */ + /* "HAL_ADC_ConfigChannel()". */ + if(hadc->Init.ScanConvMode == ADC_SCAN_DISABLE) + { + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else if(hadc->Init.ScanConvMode == ADC_SCAN_ENABLE) + { + /* Count number of ranks available in HAL ADC handle variable */ + uint32_t ADCGroupRegularSequencerRanksCount; + + /* Parse all ranks from 1 to 8 */ + for(ADCGroupRegularSequencerRanksCount = 0UL; ADCGroupRegularSequencerRanksCount < (8UL); ADCGroupRegularSequencerRanksCount++) + { + /* Check each sequencer rank until value of end of sequence */ + if(((hadc->ADCGroupRegularSequencerRanks >> (ADCGroupRegularSequencerRanksCount * 4UL)) & ADC_CHSELR_SQ1) == ADC_CHSELR_SQ1) + { + break; + } + } + + if(ADCGroupRegularSequencerRanksCount == 1UL) + { + /* Set ADC group regular sequencer: */ + /* Set sequencer scan length by clearing ranks above rank 1 */ + /* and do not modify rank 1 value. */ + SET_BIT(hadc->Instance->CHSELR, + ADC_CHSELR_SQ2_TO_SQ8); + } + else + { + /* Set ADC group regular sequencer: */ + /* - Set ADC group regular sequencer to value memorized */ + /* in HAL ADC handle */ + /* Note: This value maybe be initialized at a unknown value, */ + /* therefore afer the first call of "HAL_ADC_Init()", */ + /* each rank corresponding to parameter "NbrOfConversion" */ + /* must be set using "HAL_ADC_ConfigChannel()". */ + /* - Set sequencer scan length by clearing ranks above maximum rank */ + /* and do not modify other ranks value. */ + MODIFY_REG(hadc->Instance->CHSELR, + ADC_CHSELR_SQ_ALL, + (ADC_CHSELR_SQ2_TO_SQ8 << (((hadc->Init.NbrOfConversion - 1UL) * ADC_REGULAR_RANK_2) & 0x1FUL)) | (hadc->ADCGroupRegularSequencerRanks) + ); + } + } + + /* Check back that ADC registers have effectively been configured to */ + /* ensure of no potential problem of ADC core peripheral clocking. */ + /* Check through register CFGR1 (excluding analog watchdog configuration: */ + /* set into separate dedicated function, and bits of ADC resolution set */ + /* out of temporary variable 'tmpCFGR'). */ + if ((hadc->Instance->CFGR1 & ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_RES)) + == tmpCFGR) + { + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_BUSY_INTERNAL, + HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + +#else /* Configuration of common ADC parameters */ /* Parameters update conditioned to ADC state: */ @@ -564,7 +810,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) /* - overrun Init.Overrun */ /* - discontinuous mode Init.DiscontinuousConvMode */ /* - discontinuous mode channel count Init.NbrOfDiscConversion */ - tmpCFGR = (ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | + tmpCFGR |= (ADC_CFGR_CONTINUOUS((uint32_t)hadc->Init.ContinuousConvMode) | hadc->Init.Overrun | hadc->Init.DataAlign | hadc->Init.Resolution | @@ -662,6 +908,7 @@ HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) /* Initialize the ADC state */ /* Clear HAL_ADC_STATE_BUSY_INTERNAL bit, set HAL_ADC_STATE_READY bit */ ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL, HAL_ADC_STATE_READY); +#endif /* ADC_SUPPORT_2_5_MSPS */ } else { @@ -710,8 +957,15 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); /* Stop potential conversion on going */ +#if defined (ADC_SUPPORT_2_5_MSPS) + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); +#else tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* Disable ADC peripheral if conversions are effectively stopped */ /* Flush register JSQR: reset the queue sequencer when injected */ /* queue sequencer is enabled and ADC disabled. */ @@ -719,6 +973,7 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) /* internally disabled just after the completion of the last valid */ /* injected sequence. */ SET_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM); +#endif /* Disable ADC peripheral if conversions are effectively stopped */ if (tmp_hal_status == HAL_OK) @@ -741,18 +996,69 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) /* system RCC hard reset. */ /* ========== Reset ADC registers ========== */ +#if defined (ADC_SUPPORT_2_5_MSPS) /* Reset register IER */ - __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | ADC_IT_AWD1 | - ADC_IT_JQOVF | ADC_IT_OVR | - ADC_IT_JEOS | ADC_IT_JEOC | + __HAL_ADC_DISABLE_IT(hadc, (ADC_IT_AWD3 | ADC_IT_AWD2 | + ADC_IT_AWD1 | ADC_IT_OVR | ADC_IT_EOS | ADC_IT_EOC | + ADC_IT_EOSMP | ADC_IT_RDY ) ); + + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | + ADC_FLAG_AWD1 | ADC_FLAG_OVR | + ADC_FLAG_EOS | ADC_FLAG_EOC | + ADC_FLAG_EOSMP | ADC_FLAG_RDY ) ); + + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + + /* Reset register CFGR1 */ + hadc->Instance->CFGR1 &= ~(ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN | + ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD | + ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES | + ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN ); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + hadc->Instance->CFGR2 &= ~ADC_CFGR2_CKMODE; + + /* Reset register SMPR */ + hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; + + /* Reset register TR1 */ + hadc->Instance->TR1 &= ~(ADC_TR1_HT1 | ADC_TR1_LT1); + + /* Reset register CHSELR */ + hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + +#else + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, ( +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_IT_AWD3 | ADC_IT_AWD2 | ADC_IT_AWD1 | + ADC_IT_EOCAL | ADC_IT_CCRDY | +#else + ADC_IT_AWD3 | ADC_IT_AWD2 | ADC_IT_AWD1 | + ADC_IT_JEOS | ADC_IT_JEOC | ADC_IT_JQOVF | +#endif + ADC_IT_EOS | ADC_IT_EOC | ADC_IT_OVR | ADC_IT_EOSMP | ADC_IT_RDY)); /* Reset register ISR */ - __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | ADC_FLAG_AWD1 | - ADC_FLAG_JQOVF | ADC_FLAG_OVR | - ADC_FLAG_JEOS | ADC_FLAG_JEOC | - ADC_FLAG_EOS | ADC_FLAG_EOC | + __HAL_ADC_CLEAR_FLAG(hadc, ( +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | ADC_FLAG_AWD1 | + ADC_FLAG_EOCAL | ADC_FLAG_CCRDY | +#else + ADC_FLAG_AWD3 | ADC_FLAG_AWD2 | ADC_FLAG_AWD1 | + ADC_FLAG_JEOS | ADC_FLAG_JEOC | ADC_FLAG_JQOVF | +#endif + ADC_FLAG_EOS | ADC_FLAG_EOC | ADC_FLAG_OVR | ADC_FLAG_EOSMP | ADC_FLAG_RDY)); /* Reset register CR */ @@ -831,6 +1137,7 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) /* Reset register CALFACT */ CLEAR_BIT(hadc->Instance->CALFACT, ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* ========== Reset common ADC registers ========== */ @@ -876,9 +1183,14 @@ HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) /* Set ADC error code to none */ ADC_CLEAR_ERRORCODE(hadc); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset HAL ADC handle variable */ + hadc->ADCGroupRegularSequencerRanks = 0x00000000UL; +#else /* Reset injected channel configuration parameters */ hadc->InjectionConfig.ContextQueue = 0; hadc->InjectionConfig.ChannelCount = 0; +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Set ADC state */ hadc->State = HAL_ADC_STATE_RESET; @@ -1094,6 +1406,9 @@ HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_Ca hadc->ErrorCallback = HAL_ADC_ErrorCallback; break; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else case HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID : hadc->InjectedConvCpltCallback = HAL_ADCEx_InjectedConvCpltCallback; break; @@ -1101,6 +1416,7 @@ HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_Ca case HAL_ADC_INJ_QUEUE_OVEFLOW_CB_ID : hadc->InjectedQueueOverflowCallback = HAL_ADCEx_InjectedQueueOverflowCallback; break; +#endif case HAL_ADC_LEVEL_OUT_OF_WINDOW_2_CB_ID : hadc->LevelOutOfWindow2Callback = HAL_ADCEx_LevelOutOfWindow2Callback; @@ -1225,6 +1541,10 @@ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) HAL_ADC_STATE_REG_BUSY); /* Set ADC error code */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); +#else /* Check if a conversion is on going on ADC group injected */ if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY)) { @@ -1236,6 +1556,7 @@ HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) /* Reset all ADC error code fields */ ADC_CLEAR_ERRORCODE(hadc); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Clear ADC group regular conversion flag and overrun flag */ /* (To ensure of no unknown state from potential previous ADC operations) */ @@ -1287,8 +1608,13 @@ HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) /* Process locked */ __HAL_LOCK(hadc); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); +#else /* 1. Stop potential conversion on going, on ADC groups regular and injected */ tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Disable ADC peripheral if conversions are effectively stopped */ if (tmp_hal_status == HAL_OK) @@ -1300,9 +1626,15 @@ HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) if (tmp_hal_status == HAL_OK) { /* Set ADC state */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); +#else ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, HAL_ADC_STATE_READY); +#endif /* ADC_SUPPORT_2_5_MSPS */ } } @@ -1353,7 +1685,11 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Ti /* several ranks and polling for end of each conversion. */ /* For code simplicity sake, this particular case is generalized to */ /* ADC configured in DMA mode and and polling for end of each conversion. */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if(READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN) != 0UL) +#else if(READ_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN) != 0UL) +#endif { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); @@ -1377,13 +1713,17 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Ti { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { - /* Update ADC state machine to timeout */ - SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); - /* Process unlocked */ - __HAL_UNLOCK(hadc); + /* Process unlocked */ + __HAL_UNLOCK(hadc); - return HAL_TIMEOUT; + return HAL_TIMEOUT; + } } } } @@ -1420,7 +1760,11 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Ti /* Clear end of conversion EOC flag of regular group if low power feature */ /* "LowPowerAutoWait " is disabled, to not interfere with this feature */ /* until data register is read using function HAL_ADC_GetValue(). */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_WAIT) == 0UL) +#else if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_AUTDLY) == 0UL) +#endif { __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); } @@ -1440,7 +1784,9 @@ HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Ti * @arg @ref ADC_AWD2_EVENT ADC Analog watchdog 2 event (additional analog watchdog, not present on all STM32 families) * @arg @ref ADC_AWD3_EVENT ADC Analog watchdog 3 event (additional analog watchdog, not present on all STM32 families) * @arg @ref ADC_OVR_EVENT ADC Overrun event - * @arg @ref ADC_JQOVF_EVENT ADC Injected context queue overflow event + * @arg @ref ADC_JQOVF_EVENT ADC Injected context queue overflow event (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param Timeout Timeout value in millisecond. * @note The relevant flag is cleared if found to be set, except for ADC_FLAG_OVR. * Indeed, the latter is reset only if hadc->Init.Overrun field is set @@ -1469,13 +1815,17 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventTy { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { - /* Update ADC state machine to timeout */ - SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); - /* Process unlocked */ - __HAL_UNLOCK(hadc); + /* Process unlocked */ + __HAL_UNLOCK(hadc); - return HAL_TIMEOUT; + return HAL_TIMEOUT; + } } } } @@ -1531,6 +1881,9 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventTy break; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* Injected context queue overflow event */ case ADC_JQOVF_EVENT: /* Set ADC state */ @@ -1543,6 +1896,7 @@ HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventTy __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JQOVF); break; +#endif /* Overrun event */ default: /* Case ADC_OVR_EVENT */ @@ -1617,6 +1971,10 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) HAL_ADC_STATE_REG_BUSY); /* Set ADC error code */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); +#else /* Check if a conversion is on going on ADC group injected */ if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL) { @@ -1628,6 +1986,7 @@ HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) /* Reset all ADC error code fields */ ADC_CLEAR_ERRORCODE(hadc); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Clear ADC group regular conversion flag and overrun flag */ /* (To ensure of no unknown state from potential previous ADC operations) */ @@ -1702,8 +2061,13 @@ HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) /* Process locked */ __HAL_LOCK(hadc); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* 1. Stop potential conversion on going, on ADC group regular */ + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); +#else /* 1. Stop potential conversion on going, on ADC groups regular and injected */ tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Disable ADC peripheral if conversions are effectively stopped */ if (tmp_hal_status == HAL_OK) @@ -1719,9 +2083,15 @@ HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) if (tmp_hal_status == HAL_OK) { /* Set ADC state */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); +#else ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, HAL_ADC_STATE_READY); +#endif /* ADC_SUPPORT_2_5_MSPS */ } } @@ -1768,6 +2138,10 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, ui HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR | HAL_ADC_STATE_REG_EOSMP, HAL_ADC_STATE_REG_BUSY); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); +#else /* Check if a conversion is on going on ADC group injected */ if ((hadc->State & HAL_ADC_STATE_INJ_BUSY) != 0UL) { @@ -1779,6 +2153,7 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, ui /* Reset all ADC error code fields */ ADC_CLEAR_ERRORCODE(hadc); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Set the DMA transfer complete callback */ hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; @@ -1809,7 +2184,11 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, ui __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR); /* Enable ADC DMA mode */ +#if defined (ADC_SUPPORT_2_5_MSPS) + SET_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); +#else SET_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN); +#endif /* Start the DMA channel */ tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length); @@ -1857,13 +2236,21 @@ HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) __HAL_LOCK(hadc); /* 1. Stop potential ADC group regular conversion on going */ +#if defined (ADC_SUPPORT_2_5_MSPS) + tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_GROUP); +#else tmp_hal_status = ADC_ConversionStop(hadc, ADC_REGULAR_INJECTED_GROUP); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Disable ADC peripheral if conversions are effectively stopped */ if (tmp_hal_status == HAL_OK) { /* Disable ADC DMA (ADC DMA configuration of continous requests is kept) */ +#if defined (ADC_SUPPORT_2_5_MSPS) + CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN); +#else CLEAR_BIT(hadc->Instance->CFGR, ADC_CFGR_DMAEN); +#endif /* Disable the DMA channel (in case of DMA in circular mode or stop */ /* while DMA transfer is on going) */ @@ -1898,9 +2285,15 @@ HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) if (tmp_hal_status == HAL_OK) { /* Set ADC state */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); +#else ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, HAL_ADC_STATE_READY); +#endif /* ADC_SUPPORT_2_5_MSPS */ } } @@ -1953,9 +2346,11 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ uint32_t tmp_isr = hadc->Instance->ISR; uint32_t tmp_ier = hadc->Instance->IER; +#if !defined (ADC_SUPPORT_2_5_MSPS) uint32_t tmp_adc_inj_is_trigger_source_sw_start; uint32_t tmp_adc_reg_is_trigger_source_sw_start; uint32_t tmp_cfgr; +#endif /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -1999,7 +2394,11 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) if (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) { /* Carry on if continuous mode is disabled */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (READ_BIT (hadc->Instance->CFGR1, ADC_CFGR1_CONT) != ADC_CFGR1_CONT) +#else if (READ_BIT (hadc->Instance->CFGR, ADC_CFGR_CONT) != ADC_CFGR_CONT) +#endif { /* If End of Sequence is reached, disable interrupts */ if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS)) @@ -2053,6 +2452,9 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_EOC | ADC_FLAG_EOS)); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* ====== Check ADC group injected end of unitary conversion sequence conversions ===== */ if ((((tmp_isr & ADC_FLAG_JEOC) == ADC_FLAG_JEOC) && ((tmp_ier & ADC_IT_JEOC) == ADC_IT_JEOC)) || (((tmp_isr & ADC_FLAG_JEOS) == ADC_FLAG_JEOS) && ((tmp_ier & ADC_IT_JEOS) == ADC_IT_JEOS))) @@ -2074,44 +2476,46 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) /* group having no further conversion upcoming (same conditions as */ /* regular group interruption disabling above), */ /* and if injected scan sequence is completed. */ - if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL) || - ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) && - ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && - (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL)))) + if (tmp_adc_inj_is_trigger_source_sw_start != 0UL) { - /* If End of Sequence is reached, disable interrupts */ - if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) + if ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) || + ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) && + (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL))) { - /* Particular case if injected contexts queue is enabled: */ - /* when the last context has been fully processed, JSQR is reset */ - /* by the hardware. Even if no injected conversion is planned to come */ - /* (queue empty, triggers are ignored), it can start again */ - /* immediately after setting a new context (JADSTART is still set). */ - /* Therefore, state of HAL ADC injected group is kept to busy. */ - if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS)) { - /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */ - /* JADSTART==0 (no conversion on going) */ - if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + /* Particular case if injected contexts queue is enabled: */ + /* when the last context has been fully processed, JSQR is reset */ + /* by the hardware. Even if no injected conversion is planned to come */ + /* (queue empty, triggers are ignored), it can start again */ + /* immediately after setting a new context (JADSTART is still set). */ + /* Therefore, state of HAL ADC injected group is kept to busy. */ + if (READ_BIT(hadc->Instance->CFGR, ADC_CFGR_JQM) == 0UL) { - /* Disable ADC end of sequence conversion interrupt */ - __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC | ADC_IT_JEOS); + /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */ + /* JADSTART==0 (no conversion on going) */ + if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of sequence conversion interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC | ADC_IT_JEOS); - /* Set ADC state */ - CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY); - if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) - { - SET_BIT(hadc->State, HAL_ADC_STATE_READY); + if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL) + { + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } } - } - else - { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - /* Set ADC error code to ADC peripheral internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } } } } @@ -2132,6 +2536,7 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) /* Clear injected group conversion flag */ __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC | ADC_FLAG_JEOS); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* ========== Check Analog watchdog 1 flag ========== */ if (((tmp_isr & ADC_FLAG_AWD1) == ADC_FLAG_AWD1) && ((tmp_ier & ADC_IT_AWD1) == ADC_IT_AWD1)) @@ -2230,6 +2635,9 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR); } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /* ========== Check Injected context queue overflow flag ========== */ if (((tmp_isr & ADC_FLAG_JQOVF) == ADC_FLAG_JQOVF) && ((tmp_ier & ADC_IT_JQOVF) == ADC_IT_JQOVF)) { @@ -2249,6 +2657,7 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) HAL_ADCEx_InjectedQueueOverflowCallback(hadc); #endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ } +#endif /* ADC_SUPPORT_2_5_MSPS */ } @@ -2357,12 +2766,190 @@ __weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) */ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) { +#if defined (ADC_SUPPORT_2_5_MSPS) + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_config_internal_channel; + __IO uint32_t wait_loop_index = 0UL; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_CHANNEL(hadc, sConfig->Channel)); + assert_param(IS_ADC_SAMPLING_TIME_COMMON(sConfig->SamplingTime)); + + if((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + { + assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(sConfig->Rank)); + } + else + { + assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion)); + + assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank)); + } + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Parameters update conditioned to ADC state: */ + /* Parameters that can be updated when ADC is disabled or enabled without */ + /* conversion on going on regular group: */ + /* - Channel number */ + /* - Channel sampling time */ + /* - Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure channel: depending on rank setting, add it or remove it from */ + /* ADC sequencer. */ + /* If sequencer set to not fully configurable with channel rank set to */ + /* none, remove the channel from the sequencer. */ + /* Otherwise (sequencer set to fully configurable or to to not fully */ + /* configurable with channel rank to be set), configure the selected */ + /* channel. */ + if(sConfig->Rank != ADC_RANK_NONE) + { + /* Regular sequence configuration */ + /* Note: ADC channel configuration requires few ADC clock cycles */ + /* to be ready. Processing of ADC settings in this function */ + /* induce that a specific wait time is not necessary. */ + /* For more details on ADC channel configuration ready, */ + /* refer to function "LL_ADC_IsActiveFlag_CCRDY()". */ + if((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + { + /* Sequencer set to not fully configurable: */ + /* Set the channel by enabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChAdd(hadc->Instance, sConfig->Channel); + } + else + { + /* Sequencer set to fully configurable: */ + /* Set the channel by entering it into the selected rank. */ + + /* Memorize the channel set into variable in HAL ADC handle */ + MODIFY_REG(hadc->ADCGroupRegularSequencerRanks, + ADC_CHSELR_SQ1 << (sConfig->Rank & 0x1FUL), + __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel) << (sConfig->Rank & 0x1FUL)); + + /* If the selected rank is below ADC group regular sequencer length, */ + /* apply the configuration in ADC register. */ + /* Note: Otherwise, configuration is not applied. */ + /* To apply it, parameter'NbrOfConversion' must be increased. */ + if(((sConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion) + { + LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel); + } + } + + /* Set sampling time of the selected ADC channel */ + LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime); + + /* Management of internal measurement channels: VrefInt/TempSensor/Vbat */ + /* internal measurement paths enable: If internal channel selected, */ + /* enable dedicated internal buffers and path. */ + /* Note: these internal measurement paths can be disabled using */ + /* HAL_ADC_DeInit() or removing the channel from sequencer with */ + /* channel configuration parameter "Rank". */ + if(__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + /* If the requested internal measurement path has already been enabled, */ + /* bypass the configuration processing. */ + if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_TEMPSENSOR | tmp_config_internal_channel); + + /* Delay for temperature sensor stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while(wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else if ((sConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel); + } + else if ((sConfig->Channel == ADC_CHANNEL_VREFINT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL)) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), LL_ADC_PATH_INTERNAL_VREFINT | tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + else + { + /* Regular sequencer configuration */ + /* Note: Case of sequencer set to fully configurable: */ + /* Sequencer rank cannot be disabled, only affected to */ + /* another channel. */ + /* To remove a rank, use parameter 'NbrOfConversion". */ + if((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) || + (hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD) ) + { + /* Sequencer set to not fully configurable: */ + /* Reset the channel by disabling the corresponding bitfield. */ + LL_ADC_REG_SetSequencerChRem(hadc->Instance, sConfig->Channel); + } + + /* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */ + /* If internal channel selected, enable dedicated internal buffers and */ + /* paths. */ + if(__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel)) + { + tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)); + + if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), ~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VBAT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), ~LL_ADC_PATH_INTERNAL_VBAT & tmp_config_internal_channel); + } + else if (sConfig->Channel == ADC_CHANNEL_VREFINT) + { + LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance), ~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel); + } + else + { + /* nothing to do */ + } + } + } + } + + /* If a conversion is on going on regular group, no update on regular */ + /* channel could be done on neither of the channel configuration structure */ + /* parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + +#else HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpOffsetShifted; uint32_t tmp_config_internal_channel; __IO uint32_t wait_loop_index = 0; +#if !defined (ADC_SUPPORT_2_5_MSPS) uint32_t tmp_adc_is_conversion_on_going_regular; uint32_t tmp_adc_is_conversion_on_going_injected; +#endif /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -2404,11 +2991,15 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConf /* conversion on going on regular group: */ /* - Channel sampling time */ /* - Channel offset */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) +#else tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ { /* Set sampling time of the selected ADC channel */ LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime); @@ -2496,7 +3087,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConf /* Note: Variable divided by 2 to compensate partially */ /* CPU processing cycles, scaling in us split to not */ /* exceed 32 bits register capacity and handle low frequency. */ - wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); while(wait_loop_index != 0UL) { wait_loop_index--; @@ -2549,6 +3140,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConf /* Process unlocked */ __HAL_UNLOCK(hadc); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Return function status */ return tmp_hal_status; @@ -2575,8 +3167,10 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmpAWDHighThresholdShifted; uint32_t tmpAWDLowThresholdShifted; +#if !defined (ADC_SUPPORT_2_5_MSPS) uint32_t tmp_adc_is_conversion_on_going_regular; uint32_t tmp_adc_is_conversion_on_going_injected; +#endif /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -2584,14 +3178,23 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode)); assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode)); +#if defined (ADC_SUPPORT_2_5_MSPS) + if(AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) +#else if ((AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG) || (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)) +#endif { assert_param(IS_ADC_CHANNEL(hadc, AnalogWDGConfig->Channel)); } /* Verify thresholds range */ +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Verify if thresholds are within the selected ADC resolution */ + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold)); + assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold)); +#else if (hadc->Init.OversamplingMode == ENABLE) { /* Case of oversampling enabled: depending on ratio and shift configuration, @@ -2606,6 +3209,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold)); assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold)); } +#endif /* Process locked */ __HAL_LOCK(hadc); @@ -2615,11 +3219,15 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG /* conversion on going on ADC groups regular and injected: */ /* - Analog watchdog channels */ /* - Analog watchdog thresholds */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) +#else tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); if ((tmp_adc_is_conversion_on_going_regular == 0UL) && (tmp_adc_is_conversion_on_going_injected == 0UL) ) +#endif /* ADC_SUPPORT_2_5_MSPS */ { /* Analog watchdog configuration */ if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1) @@ -2634,6 +3242,9 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG LL_ADC_GROUP_REGULAR)); break; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else case ADC_ANALOGWATCHDOG_SINGLE_INJEC: LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_INJECTED)); @@ -2643,11 +3254,15 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR_INJECTED)); break; +#endif /* ADC_SUPPORT_2_5_MSPS */ case ADC_ANALOGWATCHDOG_ALL_REG: LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG); break; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else case ADC_ANALOGWATCHDOG_ALL_INJEC: LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_INJ); break; @@ -2655,6 +3270,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG case ADC_ANALOGWATCHDOG_ALL_REGINJEC: LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_ALL_CHANNELS_REG_INJ); break; +#endif /* ADC_SUPPORT_2_5_MSPS */ default: /* ADC_ANALOGWATCHDOG_NONE */ LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1, LL_ADC_AWD_DISABLE); @@ -2689,14 +3305,19 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG LL_ADC_DisableIT_AWD1(hadc->Instance); } } +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Feature "ADC analog watchdog 2 and 3" not available on ADC peripheral of this STM32WB device */ +#else /* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */ else { switch (AnalogWDGConfig->WatchdogMode) { case ADC_ANALOGWATCHDOG_SINGLE_REG: +#if !defined (ADC_SUPPORT_2_5_MSPS) case ADC_ANALOGWATCHDOG_SINGLE_INJEC: case ADC_ANALOGWATCHDOG_SINGLE_REGINJEC: +#endif /* Update AWD by bitfield to keep the possibility to monitor */ /* several channels by successive calls of this function. */ if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2) @@ -2710,9 +3331,15 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG break; case ADC_ANALOGWATCHDOG_ALL_REG: +#if !defined (ADC_SUPPORT_2_5_MSPS) case ADC_ANALOGWATCHDOG_ALL_INJEC: case ADC_ANALOGWATCHDOG_ALL_REGINJEC: +#endif +#if defined (ADC_SUPPORT_2_5_MSPS) + LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG); +#else LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG_INJ); +#endif break; default: /* ADC_ANALOGWATCHDOG_NONE */ @@ -2772,6 +3399,7 @@ HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDG } } } +#endif /* ADC_SUPPORT_2_5_MSPS */ } /* If a conversion is on going on ADC group regular or injected, no update */ @@ -2861,13 +3489,55 @@ uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc) * @param hadc ADC handle * @param ConversionGroup ADC group regular and/or injected. * This parameter can be one of the following values: - * @arg @ref ADC_REGULAR_GROUP ADC regular conversion type. - * @arg @ref ADC_INJECTED_GROUP ADC injected conversion type. - * @arg @ref ADC_REGULAR_INJECTED_GROUP ADC regular and injected conversion type. + * @arg @ref ADC_REGULAR_GROUP ADC regular conversion type. + * @arg @ref ADC_INJECTED_GROUP (1) ADC injected conversion type. + * @arg @ref ADC_REGULAR_INJECTED_GROUP (1) ADC regular and injected conversion type. + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval HAL status. */ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t ConversionGroup) { +#if defined (ADC_SUPPORT_2_5_MSPS) + UNUSED(ConversionGroup); + + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped on regular group to bypass */ + /* this function if not needed. */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) != 0UL) + { + /* Stop potential conversion on going on regular group */ + /* Software is allowed to set ADSTP only when ADSTART=1 and ADDIS=0 */ + if (LL_ADC_IsDisableOngoing(hadc->Instance) == 0UL) + { + /* Stop ADC group regular conversion */ + LL_ADC_REG_StopConversion(hadc->Instance); + } + + /* Wait for conversion effectively stopped */ + /* Get tick count */ + tickstart = HAL_GetTick(); + + while((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL) + { + if((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } + } + + } +#else uint32_t tickstart; uint32_t Conversion_Timeout_CPU_cycles = 0UL; uint32_t conversion_group_reassigned = ConversionGroup; @@ -2971,17 +3641,22 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t Conversio { if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT) { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - /* Set ADC error code to ADC peripheral internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - return HAL_ERROR; + return HAL_ERROR; + } } } } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Return HAL status */ return HAL_OK; @@ -2999,6 +3674,7 @@ HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc, uint32_t Conversio HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) { uint32_t tickstart; + __IO uint32_t wait_loop_index = 0UL; /* ADC enable and wait for ADC ready (in case of ADC is disabled or */ /* enabling phase not yet completed: flag ADC ready not yet set). */ @@ -3007,7 +3683,11 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) { /* Check if conditions to enable the ADC are fulfilled */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) +#else if ((hadc->Instance->CR & (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN)) != 0UL) +#endif { /* Update ADC state machine to error */ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); @@ -3021,33 +3701,54 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) /* Enable the ADC peripheral */ LL_ADC_Enable(hadc->Instance); - /* Wait for ADC effectively enabled */ - tickstart = HAL_GetTick(); - - while (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) + if((LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance)) & LL_ADC_PATH_INTERNAL_TEMPSENSOR) != 0UL) { - /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit - has been cleared (after a calibration), ADEN bit is reset by the - calibration logic. - The workaround is to continue setting ADEN until ADRDY is becomes 1. - Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this - 4 ADC clock cycle duration */ - /* Note: Test of ADC enabled required due to hardware constraint to */ - /* not enable ADC if already enabled. */ - if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + /* Delay for temperature sensor buffer stabilization time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); + while(wait_loop_index != 0UL) { - LL_ADC_Enable(hadc->Instance); + wait_loop_index--; } + } - if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) +#if defined (ADC_SUPPORT_2_5_MSPS) + /* If low power mode AutoPowerOff is enabled, power-on/off phases are */ + /* performed automatically by hardware and flag ADC ready is not set. */ + if (hadc->Init.LowPowerAutoPowerOff != ENABLE) +#endif /*ADC_SUPPORT_2_5_MSPS */ + { + /* Wait for ADC effectively enabled */ + tickstart = HAL_GetTick(); + + while(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL) { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - - /* Set ADC error code to ADC peripheral internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - - return HAL_ERROR; + /* If ADEN bit is set less than 4 ADC clock cycles after the ADCAL bit + has been cleared (after a calibration), ADEN bit is reset by the + calibration logic. + The workaround is to continue setting ADEN until ADRDY is becomes 1. + Additionally, ADC_ENABLE_TIMEOUT is defined to encompass this + 4 ADC clock cycle duration */ + /* Note: Test of ADC enabled required due to hardware constraint to */ + /* not enable ADC if already enabled. */ + if(LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + LL_ADC_Enable(hadc->Instance); + } + + if((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + + return HAL_ERROR; + } } } } @@ -3076,7 +3777,11 @@ HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) ) { /* Check if conditions to disable the ADC are fulfilled */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if ((hadc->Instance->CR & (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) +#else if ((hadc->Instance->CR & (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN) +#endif { /* Disable the ADC peripheral */ LL_ADC_Disable(hadc->Instance); @@ -3101,13 +3806,17 @@ HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) { if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT) { - /* Update ADC state machine to error */ - SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); - /* Set ADC error code to ADC peripheral internal error */ - SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); - return HAL_ERROR; + return HAL_ERROR; + } } } } @@ -3136,6 +3845,41 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) /* by external trigger, continuous mode or scan sequence on going */ /* to disable interruption. */ /* Is it the end of the regular sequence ? */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if( (LL_ADC_REG_IsTriggerSourceSWStart(hadc->Instance) != 0UL) + && (hadc->Init.ContinuousConvMode == DISABLE) + ) + { + /* If End of Sequence is reached, disable interrupts */ + if( __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOS) ) + { + /* Allowed to modify bits ADC_IT_EOC/ADC_IT_EOS only if bit */ + /* ADSTART==0 (no conversion on going) */ + if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Disable ADC end of single conversion interrupt on group regular */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC | ADC_IT_EOS); + + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_READY); + } + else + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + /* Set ADC error code to ADC peripheral internal error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL); + } + } + } + +#else if ((hadc->Instance->ISR & ADC_FLAG_EOS) != 0UL) { /* Are conversions software-triggered ? */ @@ -3167,6 +3911,7 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) } } } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Conversion complete callback */ #if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c index 132758580d..7d6a45a30c 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c @@ -3,18 +3,18 @@ * @file stm32wbxx_hal_adc_ex.c * @author MCD Application Team * @brief This file provides firmware functions to manage the following - * functionalities of the Analog to Digital Convertor (ADC) + * functionalities of the Analog to Digital Converter (ADC) * peripheral: * + Operation functions * ++ Start, stop, get result of conversions of ADC group injected, - * using 2 possible modes: polling, interruption. + * using 2 possible modes: polling, interruption (not available on devices: STM32WB10xx, STM32WB15xx). * ++ Calibration * +++ ADC automatic self-calibration * +++ Calibration factors get or set * + Control functions - * ++ Channels configuration on ADC group injected + * ++ Channels configuration on ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx) * + State functions - * ++ ADC group injected contexts queue management + * ++ ADC group injected contexts queue management (not available on devices: STM32WB10xx, STM32WB15xx) * Other functions (generic functions) are available in file * "stm32wbxx_hal_adc.c". * @@ -99,12 +99,12 @@ (+) Get calibration factors for single or differential ending. (+) Set calibration factors for single or differential ending. - (+) Start conversion of ADC group injected. - (+) Stop conversion of ADC group injected. - (+) Poll for conversion complete on ADC group injected. - (+) Get result of ADC group injected channel conversion. - (+) Start conversion of ADC group injected and enable interruptions. - (+) Stop conversion of ADC group injected and disable interruptions. + (+) Start conversion of ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx). + (+) Stop conversion of ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx). + (+) Poll for conversion complete on ADC group injected (not available on devices: STM32WB10xx, STM32WB15xx). + (+) Get result of ADC group injected channel conversion (not available on devices: STM32WB10xx, STM32WB15xx). + (+) Start conversion of ADC group injected and enable interruptions (not available on devices: STM32WB10xx, STM32WB15xx). + (+) Stop conversion of ADC group injected and disable interruptions (not available on devices: STM32WB10xx, STM32WB15xx). @endverbatim * @{ @@ -118,11 +118,17 @@ * @param SingleDiff Selection of single-ended or differential input * This parameter can be one of the following values: * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended - * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval HAL status */ HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff) { +#if defined (ADC_SUPPORT_2_5_MSPS) + UNUSED(SingleDiff); +#endif + HAL_StatusTypeDef tmp_hal_status; __IO uint32_t wait_loop_index = 0UL; @@ -142,12 +148,22 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t if (tmp_hal_status == HAL_OK) { /* Set ADC state */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_REG_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); +#else ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY, HAL_ADC_STATE_BUSY_INTERNAL); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Start ADC calibration in mode single-ended or differential */ +#if defined (ADC_SUPPORT_2_5_MSPS) + LL_ADC_StartCalibration(hadc->Instance); +#else LL_ADC_StartCalibration(hadc->Instance, SingleDiff); +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Wait for calibration completion */ while (LL_ADC_IsCalibrationOnGoing(hadc->Instance) != 0UL) @@ -192,17 +208,27 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t * @param hadc ADC handle. * @param SingleDiff This parameter can be only: * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended - * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @retval Calibration value. */ uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff) { +#if defined (ADC_SUPPORT_2_5_MSPS) + UNUSED(SingleDiff); +#endif + /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); assert_param(IS_ADC_SINGLE_DIFFERENTIAL(SingleDiff)); /* Return the selected ADC calibration value */ +#if defined (ADC_SUPPORT_2_5_MSPS) + return LL_ADC_GetCalibrationFactor(hadc->Instance); +#else return LL_ADC_GetCalibrationFactor(hadc->Instance, SingleDiff); +#endif } /** @@ -211,15 +237,25 @@ uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t Single * @param hadc ADC handle * @param SingleDiff This parameter can be only: * @arg @ref ADC_SINGLE_ENDED Channel in mode input single ended - * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended + * @arg @ref ADC_DIFFERENTIAL_ENDED Channel in mode input differential ended (1) + * + * (1) On STM32WB serie, parameter not available on devices: STM32WB10xx, STM32WB15xx. * @param CalibrationFactor Calibration factor (coded on 7 bits maximum) * @retval HAL state */ HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor) { +#if defined (ADC_SUPPORT_2_5_MSPS) + UNUSED(SingleDiff); +#endif + HAL_StatusTypeDef tmp_hal_status = HAL_OK; uint32_t tmp_adc_is_conversion_on_going_regular; +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else uint32_t tmp_adc_is_conversion_on_going_injected; +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); @@ -232,15 +268,27 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32 /* Verification of hardware constraints before modifying the calibration */ /* factors register: ADC must be enabled, no conversion on going. */ tmp_adc_is_conversion_on_going_regular = LL_ADC_REG_IsConversionOngoing(hadc->Instance); +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else tmp_adc_is_conversion_on_going_injected = LL_ADC_INJ_IsConversionOngoing(hadc->Instance); +#endif /* ADC_SUPPORT_2_5_MSPS */ if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL) && (tmp_adc_is_conversion_on_going_regular == 0UL) +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else && (tmp_adc_is_conversion_on_going_injected == 0UL) +#endif /* ADC_SUPPORT_2_5_MSPS */ ) { /* Set the selected ADC calibration value */ +#if defined (ADC_SUPPORT_2_5_MSPS) + LL_ADC_SetCalibrationFactor(hadc->Instance, CalibrationFactor); +#else LL_ADC_SetCalibrationFactor(hadc->Instance, SingleDiff, CalibrationFactor); +#endif } else { @@ -260,6 +308,9 @@ HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32 return tmp_hal_status; } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Enable ADC, start conversion of injected group. * @note Interruptions enabled in this function: None. @@ -454,13 +505,17 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, u { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) { - /* Update ADC state machine to timeout */ - SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + /* New check to avoid false timeout detection in case of preemption */ + if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); - /* Process unlocked */ - __HAL_UNLOCK(hadc); + /* Process unlocked */ + __HAL_UNLOCK(hadc); - return HAL_TIMEOUT; + return HAL_TIMEOUT; + } } } } @@ -705,7 +760,11 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc) /* Return function status */ return tmp_hal_status; } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Get ADC injected group conversion result. * @note Reading register JDRx automatically clears ADC flag JEOC @@ -797,6 +856,7 @@ __weak void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc) function HAL_ADCEx_InjectedQueueOverflowCallback must be implemented in the user file. */ } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Analog watchdog 2 callback in non-blocking mode. @@ -844,6 +904,9 @@ __weak void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc) */ } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Stop ADC conversion of regular group (and injected channels in * case of auto_injection mode), disable ADC peripheral if no @@ -1038,11 +1101,15 @@ HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc) /* Return function status */ return tmp_hal_status; } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @} */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** @defgroup ADCEx_Exported_Functions_Group2 ADC Extended Peripheral Control functions * @brief ADC Extended Peripheral Control functions * @@ -1506,7 +1573,11 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_I /* Return function status */ return tmp_hal_status; } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Enable Injected Queue * @note This function resets CFGR register JQDIS bit in order to enable the @@ -1584,6 +1655,7 @@ HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc) return tmp_hal_status; } +#endif /* ADC_SUPPORT_2_5_MSPS */ /** * @brief Disable ADC voltage regulator. @@ -1615,8 +1687,11 @@ HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc) return tmp_hal_status; } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature " ADC deep power-down" not available on ADC peripheral of this STM32WB device */ +#else /** - * @brief Enter ADC deep-power-down mode + * @brief Enter ADC deep power-down mode * @note This mode is achieved in setting DEEPPWD bit and allows to save power * in reducing leakage currents. It is particularly interesting before * entering stop modes. @@ -1651,6 +1726,7 @@ HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc) return tmp_hal_status; } +#endif /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c index 91c1979f1f..5a61b5d2ae 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c @@ -18,7 +18,8 @@ [..] The STM32WBxx device family integrates two analog comparators instances: - COMP1, COMP2. + COMP1, COMP2 except for the STM32WB15xx, STM32WB10xx products featuring only + one instance: COMP1. In the rest of the file, all comments related to a pair of comparators are not applicable to STM32WB15xx, STM32WB10xx. (#) Comparators input minus (inverting input) and input plus (non inverting input) @@ -350,7 +351,7 @@ HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) /* Note: Variable divided by 2 to compensate partially */ /* CPU processing cycles, scaling in us split to not */ /* exceed 32 bits register capacity and handle low frequency. */ - wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); while(wait_loop_index != 0UL) { wait_loop_index--; @@ -724,7 +725,7 @@ HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) /* Note: Variable divided by 2 to compensate partially */ /* CPU processing cycles, scaling in us split to not */ /* exceed 32 bits register capacity and handle low frequency. */ - wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL)); while(wait_loop_index != 0UL) { wait_loop_index--; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c index 12c62c5519..d98434e620 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c @@ -6,7 +6,7 @@ * This file provides firmware functions to manage the following * functionalities of the Cryptography (CRYP) peripheral: * + Initialization, de-initialization, set config and get config functions - * + DES/TDES, AES processing functions + * + AES processing functions * + DMA callback functions * + CRYP IRQ handler management * + Peripheral State functions @@ -32,8 +32,8 @@ (+++) Associate the initialized DMA handle to the CRYP DMA handle using __HAL_LINKDMA() (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the two DMA Streams. The output stream should have higher - priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ() + interrupt on the two DMA channels. The output channel should have higher + priority than the input channel HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). (#)Initialize the CRYP according to the specified parameters : (##) The data type: 1-bit, 8-bit, 16-bit or 32-bit. @@ -44,9 +44,13 @@ (+++) In some specific configurations, the key is written by the application code out of the HAL scope. In that case, user can still resort to the HAL APIs as usual but must make sure that pKey pointer is set to NULL. + (##) The DataWidthUnit field. It specifies whether the data length (or the payload length for authentication + algorithms) is in words or bytes. (##) The Header used only in AES GCM and CCM Algorithm for authentication. - (##) The HeaderSize The size of header buffer in word. - (##) The B0 block is the first authentication block used only in AES CCM mode. + (##) The HeaderSize providing the size of the header buffer in words or bytes, depending upon HeaderWidthUnit field. + (##) The HeaderWidthUnit field. It specifies whether the header length (for authentication algorithms) is in words or bytes. + (##) The B0 block is the first authentication block used only in AES CCM mode. + (##) The KeyIVConfigSkip used to process several messages in a row (please see more information below). (#)Three processing (encryption/decryption) functions are available: (##) Polling mode: encryption and decryption APIs are blocking functions @@ -321,6 +325,7 @@ #define CRYP_PHASE_HEADER_SUSPENDED 0x00000004U /*!< GCM/GMAC/CCM header phase is suspended */ #define CRYP_PHASE_PAYLOAD_SUSPENDED 0x00000005U /*!< GCM/CCM payload phase is suspended */ #endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +#define CRYP_PHASE_HEADER_DMA_FEED 0x00000006U /*!< GCM/GMAC/CCM header is fed to the peripheral in DMA mode */ #define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode(Mode 1) */ #define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions (Mode 2) */ @@ -345,9 +350,7 @@ * @{ */ -#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~AES_CR_GCMPH);\ - (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\ - }while(0U) +#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) MODIFY_REG((__HANDLE__)->Instance->CR, AES_CR_GCMPH, (uint32_t)(__PHASE__)) /** * @} @@ -361,6 +364,7 @@ */ static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size); static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); static void CRYP_DMAError(DMA_HandleTypeDef *hdma); @@ -370,6 +374,7 @@ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, u static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp); static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); @@ -383,6 +388,7 @@ static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp); static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); #if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Output); static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t* Input); @@ -581,15 +587,17 @@ HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeD __HAL_LOCK(hcryp); /* Set CRYP parameters */ - hcryp->Init.DataType = pConf->DataType; - hcryp->Init.pKey = pConf->pKey; - hcryp->Init.Algorithm = pConf->Algorithm; - hcryp->Init.KeySize = pConf->KeySize; - hcryp->Init.pInitVect = pConf->pInitVect; - hcryp->Init.Header = pConf->Header; - hcryp->Init.HeaderSize = pConf->HeaderSize; - hcryp->Init.B0 = pConf->B0; - hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; + hcryp->Init.DataType = pConf->DataType; + hcryp->Init.pKey = pConf->pKey; + hcryp->Init.Algorithm = pConf->Algorithm; + hcryp->Init.KeySize = pConf->KeySize; + hcryp->Init.pInitVect = pConf->pInitVect; + hcryp->Init.Header = pConf->Header; + hcryp->Init.HeaderSize = pConf->HeaderSize; + hcryp->Init.B0 = pConf->B0; + hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; + hcryp->Init.HeaderWidthUnit = pConf->HeaderWidthUnit; + hcryp->Init.KeyIVConfigSkip = pConf->KeyIVConfigSkip; /* Set the key size (This bit field is do not care in the DES or TDES modes), data type and operating mode*/ MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); @@ -655,7 +663,9 @@ HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeD pConf->Header = hcryp->Init.Header ; pConf->HeaderSize = hcryp->Init.HeaderSize; pConf->B0 = hcryp->Init.B0; - pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; + pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; + pConf->HeaderWidthUnit = hcryp->Init.HeaderWidthUnit; + pConf->KeyIVConfigSkip = hcryp->Init.KeyIVConfigSkip; /* Process Unlocked */ __HAL_UNLOCK(hcryp); @@ -687,8 +697,8 @@ __weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) /* Prevent unused argument(s) compilation warning */ UNUSED(hcryp); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_MspInit could be implemented in the user file + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspInit can be implemented in the user file */ } @@ -703,8 +713,8 @@ __weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) /* Prevent unused argument(s) compilation warning */ UNUSED(hcryp); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_MspDeInit could be implemented in the user file + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspDeInit can be implemented in the user file */ } @@ -1185,7 +1195,7 @@ HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (plaintext) - * @param Size Length of the plaintext buffer in word. + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(ciphertext) * @param Timeout Specify Timeout value * @retval HAL status @@ -1285,7 +1295,7 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, u * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (ciphertext ) - * @param Size Length of the plaintext buffer in word. + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(plaintext) * @param Timeout Specify Timeout value * @retval HAL status @@ -1385,7 +1395,7 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, u * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (plaintext) - * @param Size Length of the plaintext buffer in word + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(ciphertext) * @retval HAL status */ @@ -1495,7 +1505,7 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (ciphertext ) - * @param Size Length of the plaintext buffer in word. + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(plaintext) * @retval HAL status */ @@ -1604,7 +1614,7 @@ HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (plaintext) - * @param Size Length of the plaintext buffer in word. + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(ciphertext) * @retval HAL status */ @@ -1731,7 +1741,7 @@ HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Inpu * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param Input Pointer to the input buffer (ciphertext ) - * @param Size Length of the plaintext buffer in word + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) * @param Output Pointer to the output buffer(plaintext) * @retval HAL status */ @@ -1869,7 +1879,7 @@ void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) /* Clear computation complete flag */ __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) + if ((hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) { /* if header phase */ @@ -1882,18 +1892,6 @@ void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); } } - else if (hcryp->Init.Algorithm == CRYP_AES_CCM) - { - /* if header phase */ - if (hcryp->Init.HeaderSize >= hcryp->CrypHeaderCount) - { - CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); - } - else /* if payload phase */ - { - CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); - } - } else /* AES Algorithm ECB,CBC or CTR*/ { CRYP_AES_IT(hcryp); @@ -1935,8 +1933,8 @@ __weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) /* Prevent unused argument(s) compilation warning */ UNUSED(hcryp); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_InCpltCallback could be implemented in the user file + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_InCpltCallback can be implemented in the user file */ } @@ -1951,8 +1949,8 @@ __weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) /* Prevent unused argument(s) compilation warning */ UNUSED(hcryp); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_OutCpltCallback could be implemented in the user file + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_OutCpltCallback can be implemented in the user file */ } @@ -1967,8 +1965,8 @@ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) /* Prevent unused argument(s) compilation warning */ UNUSED(hcryp); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_CRYP_ErrorCallback could be implemented in the user file + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_ErrorCallback can be implemented in the user file */ } /** @@ -2502,10 +2500,95 @@ static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp) static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) { CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ /* Stop the DMA transfers to the IN FIFO by clearing to "0" the DMAINEN */ CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) + { + /* DMA is disabled, CCF is meaningful. Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if ((headersize_in_bytes % 16U) != 0U) + { + /* Write last words that couldn't be fed by DMA */ + hcryp->CrypHeaderCount = (uint16_t)((headersize_in_bytes / 16U) * 4U); + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + /* Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + } /* if ((headersize_in_bytes % 16U) != 0U) */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + (void)CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp); + } + else + { + uint32_t algo; + /* ECB, CBC or CTR end of input data feeding + or + end of GCM/CCM payload data feeding through DMA */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + /* Don't call input data transfer complete callback only if + it remains some input data to write to the peripheral. + This case can only occur for GCM and CCM with a payload length + not a multiple of 16 bytes */ + if (!(((algo == CRYP_AES_GCM_GMAC) || (algo == CRYP_AES_CCM)) && \ + (((hcryp->Size) % 16U) != 0U))) + { /* Call input data transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) /*Call registered Input complete callback*/ @@ -2516,6 +2599,9 @@ static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) #endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } + } /* if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) */ +} + /** * @brief DMA CRYP output data process complete callback. * @param hdma DMA handle @@ -2526,7 +2612,7 @@ static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) uint32_t count; uint32_t npblb; uint32_t lastwordsize; - uint32_t temp; /* Temporary CrypOutBuff */ + uint32_t temp[4]; /* Temporary CrypOutBuff */ uint32_t mode; CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; @@ -2577,46 +2663,31 @@ static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) hcryp->Instance->DINR = 0x0U; count++; } - - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - + /* Call input data transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); #else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + /*Wait on CCF flag*/ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); /*Read the output block from the output FIFO */ for (count = 0U; count < 4U; count++) { /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - temp = hcryp->Instance->DOUTR; + temp[count] = hcryp->Instance->DOUTR; + } - *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp; + count = 0U; + while((hcryp->CrypOutCount < ((hcryp->Size + 3U)/4U)) && (count<4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[count]; hcryp->CrypOutCount++; + count++; } } @@ -2675,7 +2746,7 @@ static void CRYP_DMAError(DMA_HandleTypeDef *hdma) * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module * @param inputaddr address of the input buffer - * @param Size size of the input buffer, must be a multiple of 16. + * @param Size size of the input and output buffers in words, must be a multiple of 4 * @param outputaddr address of the output buffer * @retval None */ @@ -2734,6 +2805,43 @@ static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uin } /** + * @brief Set the DMA configuration and start the header DMA transfer + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr address of the input buffer + * @param Size size of the input buffer in words, must be a multiple of 4 + * @retval None + */ +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Mark that header is fed to the peripheral in DMA mode */ + hcryp->Phase = CRYP_PHASE_HEADER_DMA_FEED; + /* Enable the DMA input stream */ + if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + /* Call error callback */ + } + + /* Enable IN DMA requests */ + SET_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + return HAL_OK; +} + +/** * @brief Process Data: Write Input data in polling mode and used in AES functions. * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module @@ -3162,6 +3270,12 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) uint32_t lastwordsize; uint32_t npblb; uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + #if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) @@ -3171,6 +3285,17 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) } #endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + /* Manage header size given in bytes to handle cases where + header size is not a multiple of 4 bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) { if (hcryp->KeyIVConfig == 1U) @@ -3284,7 +3409,7 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->CrypInCount++; hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); hcryp->CrypInCount++; - if (hcryp->CrypInCount == (hcryp->Size / 4U)) + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) { /* Call Input transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) @@ -3335,42 +3460,58 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } - else if ((hcryp->Init.HeaderSize) < 4U) + /* Enter header data */ + /* Cher first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) { - for (loopcounter = 0U; loopcounter < hcryp->Init.HeaderSize ; loopcounter++) + /* Write header data, padded with zeros if need be */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) { hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); hcryp->CrypHeaderCount++ ; } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++ ; + /* Pad the data with zeros to have a complete block */ while (loopcounter < 4U) { - /* pad the data with zeros to have a complete block */ hcryp->Instance->DINR = 0x0U; loopcounter++; + hcryp->CrypHeaderCount++; + } } - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - /* Set to 0 the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); - - /* Call Input transfer complete callback */ -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered Input complete callback*/ - hcryp->InCpltCallback(hcryp); -#else - /*Call legacy weak Input complete callback*/ - HAL_CRYP_InCpltCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } else { - /* Write the input block in the IN FIFO */ + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); hcryp->CrypHeaderCount++; hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); @@ -3415,7 +3556,7 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->CrypInCount++; hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); hcryp->CrypInCount++; - if (hcryp->CrypInCount == (hcryp->Size / 4U)) + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) { /* Call Input transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) @@ -3466,6 +3607,14 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } @@ -3482,12 +3631,7 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) */ static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) { - __IO uint32_t count; - uint16_t wordsize = hcryp->Size / 4U ; - uint32_t index; - uint32_t npblb; - uint32_t lastwordsize; - uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t count; uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) @@ -3566,121 +3710,15 @@ static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) return HAL_ERROR; } - /************************ Payload phase ************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Set to 0 the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); - - /* Select payload phase once the header phase is performed */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); - - } /* if (DoKeyIVConfig == 1U) */ - - if (hcryp->Size == 0U) - { - /* Process unLocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } - else if (hcryp->Size >= 16U) - { - /*DMA transfer must not include the last block in case of Size is not %16 */ - wordsize = wordsize - (wordsize % 4U); - - /*DMA transfer */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), wordsize, (uint32_t)(hcryp->pCrypOutBuffPtr)); } - else /* length of input data is < 16 */ + else { - /* Compute the number of padding bytes in last block of payload */ - npblb = 16U - (uint32_t)hcryp->Size; - - /* Set Npblb in case of AES GCM payload encryption to get right tag*/ - if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) - { - /* Specify the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); - } - - /* Enable CRYP to start the final phase */ - __HAL_CRYP_ENABLE(hcryp); - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) - { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* last block optionally pad the data with zeros*/ - for (index = 0U; index < lastwordsize; index ++) + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) { - /* Write the last Input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (index < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - index++; - } - /* Wait for CCF flag to be raised */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /*Read the output block from the output FIFO */ - for (index = 0U; index < 4U; index++) - { - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - temp[index] = hcryp->Instance->DOUTR; - } - for (index = 0U; index < lastwordsize; index++) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; - hcryp->CrypOutCount++; + return HAL_ERROR; } - - /* Change the CRYP state to ready */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } + } /* if (DoKeyIVConfig == 1U) */ /* Return function status */ return HAL_OK; @@ -4075,6 +4113,14 @@ static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } else if ((hcryp->Init.HeaderSize) < 4U) /*HeaderSize < 4 */ @@ -4180,6 +4226,14 @@ static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } @@ -4196,12 +4250,7 @@ static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) */ static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) { - __IO uint32_t count = 0U; - uint16_t wordsize = hcryp->Size / 4U ; - uint32_t index; - uint32_t npblb; - uint32_t lastwordsize; - uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t count; uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) @@ -4282,118 +4331,15 @@ static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) return HAL_ERROR; } - /******************** Payload phase *****************************************/ - - /* Set the phase */ - hcryp->Phase = CRYP_PHASE_PROCESS; - - /* Set to 0 the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); - - /* Select payload phase once the header phase is performed */ - MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); - - } /* if (DoKeyIVConfig == 1U) */ - - if (hcryp->Size == 0U) - { - /* Process unLocked */ - __HAL_UNLOCK(hcryp); - - /* Change the CRYP state and phase */ - hcryp->State = HAL_CRYP_STATE_READY; - } - else if (hcryp->Size >= 16U) - { - /*DMA transfer must not include the last block in case of Size is not %16 */ - wordsize = wordsize - (wordsize % 4U); - - /*DMA transfer */ - CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), wordsize, (uint32_t)(hcryp->pCrypOutBuffPtr)); } - else /* length of input data is < 16 */ + else { - /* Compute the number of padding bytes in last block of payload */ - npblb = 16U - (uint32_t)hcryp->Size; - - /* Set Npblb in case of AES CCM payload decryption to get right tag*/ - if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) - { - /* Specify the number of non-valid bytes using NPBLB register*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); - } - - /* Number of valid words (lastwordsize) in last block */ - if ((npblb % 4U) == 0U) + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) { - lastwordsize = (16U - npblb) / 4U; - } - else - { - lastwordsize = ((16U - npblb) / 4U) + 1U; - } - - /* last block optionally pad the data with zeros*/ - for (index = 0U; index < lastwordsize; index ++) - { - /* Write the last Input block in the IN FIFO */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); - hcryp->CrypInCount++; - } - while (index < 4U) - { - /* pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0U; - index++; - } - /* Wait for CCF flag to be raised */ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); -#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) - /*Call registered error callback*/ - hcryp->ErrorCallback(hcryp); -#else - /*Call legacy weak error callback*/ - HAL_CRYP_ErrorCallback(hcryp); -#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ - } - } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF Flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - - /*Read the output block from the output FIFO */ - for (index = 0U; index < 4U; index++) - { - /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ - temp[index] = hcryp->Instance->DOUTR; - } - for (index = 0U; index < lastwordsize; index++) - { - *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; - hcryp->CrypOutCount++; + return HAL_ERROR; } - - /* Change the CRYP state to ready */ - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - } + } /* if (DoKeyIVConfig == 1U) */ /* Return function status */ return HAL_OK; @@ -4493,9 +4439,9 @@ static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) hcryp->CrypInCount++; hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); hcryp->CrypInCount++; - if ((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) { - /* Call output transfer complete callback */ + /* Call input transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) /*Call registered Input complete callback*/ hcryp->InCpltCallback(hcryp); @@ -4541,11 +4487,152 @@ static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } /** + * @brief Sets the payload phase in DMA mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint16_t wordsize = hcryp->Size / 4U ; + uint32_t index; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t count; + uint32_t reg; + + /************************ Payload phase ************************************/ + if (hcryp->Size == 0U) + { + /* Process unLocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state and phase */ + hcryp->State = HAL_CRYP_STATE_READY; + } + else if (hcryp->Size >= 16U) + { + /*DMA transfer must not include the last block in case of Size is not %16 */ + wordsize = wordsize - (wordsize % 4U); + + /*DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), wordsize, (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else /* length of input data is < 16 */ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + /* Set Npblb in case of AES GCM payload encryption or AES CCM payload decryption to get right tag*/ + reg = hcryp->Instance->CR & (AES_CR_CHMOD|AES_CR_MODE); + if ((reg == (CRYP_AES_GCM_GMAC|CRYP_OPERATINGMODE_ENCRYPT)) ||\ + (reg == (CRYP_AES_CCM|CRYP_OPERATINGMODE_DECRYPT))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (index = 0U; index < lastwordsize; index ++) + { + /* Write the last Input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0U; + index++; + } + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer then get CrypOutBuff from temporary buffer */ + temp[index] = hcryp->Instance->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call Output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** * @brief Sets the header phase in polling mode * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module(Header & HeaderSize) @@ -4557,7 +4644,9 @@ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, u uint32_t loopcounter; uint32_t size_in_bytes; uint32_t tmp; - uint32_t mask[4] = {0x0U, 0x0FFU, 0x0FFFFU, 0x0FFFFFFU}; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ /***************************** Header phase for GCM/GMAC or CCM *********************************/ if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) @@ -4659,9 +4748,9 @@ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, u } else { - /* Enter last bytes, padded with zeroes */ + /* Enter last bytes, padded with zeros */ tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - tmp &= mask[size_in_bytes % 4U]; + tmp &= mask[(hcryp->Init.DataType * 2U) + (size_in_bytes % 4U)]; hcryp->Instance->DINR = tmp; loopcounter++; /* Pad the data with zeros to have a complete block */ @@ -4691,17 +4780,14 @@ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, u } else { - if (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) - { - /*Workaround 1: only AES, before re-enabling the peripheral, datatype can be configured.*/ - MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); + /*Workaround 1: only AES, before re-enabling the peripheral, datatype can be configured.*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); } /* Return function status */ return HAL_OK; @@ -4715,143 +4801,112 @@ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, u */ static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp) { - __IO uint32_t count = 0U; uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ /***************************** Header phase for GCM/GMAC or CCM *********************************/ - if ((hcryp->Init.HeaderSize != 0U)) + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) { - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - - if ((hcryp->Init.HeaderSize % 4U) == 0U) - { - /* HeaderSize %4, no padding */ - for (loopcounter = 0U; (loopcounter < hcryp->Init.HeaderSize); loopcounter += 4U) - { - /* Write the input block in the data input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); - } + /* If header size is at least equal to 16 bytes, feed the header through DMA. + If size_in_bytes is not a multiple of blocks (is not a multiple of four 32-bit words ), + last bytes feeding and padding will be done in CRYP_DMAInCplt() */ + if (headersize_in_bytes >= 16U) + { + /* Initiate header DMA transfer */ + if (CRYP_SetHeaderDMAConfig(hcryp, (uint32_t)(hcryp->Init.Header), (uint16_t)((headersize_in_bytes / 16U) * 4U)) != HAL_OK) + { + return HAL_ERROR; } - else + } + else + { + if (headersize_in_bytes != 0U) { - /*Write header block in the IN FIFO without last block */ - for (loopcounter = 0U; (loopcounter < ((hcryp->Init.HeaderSize) - (hcryp->Init.HeaderSize % 4U))); loopcounter += 4U) + /* Header length is larger than 0 and strictly less than 16 bytes */ + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) { - /* Write the Input block in the Data Input register */ - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; - - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do - { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); - - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; - - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } - } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - - /* Clear CCF flag */ - __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); } - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; (loopcounter < (hcryp->Init.HeaderSize % 4U)); loopcounter++) + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) { - hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); - hcryp->CrypHeaderCount++ ; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } } - while (loopcounter < 4U) + else { - /* Pad the data with zeros to have a complete block */ - hcryp->Instance->DINR = 0x0U; + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } } - /*Wait on CCF flag*/ - count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; - do + if (CRYP_WaitOnCCFlag(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE) != HAL_OK) { - count-- ; - if (count == 0U) - { - /* Disable the CRYP peripheral clock */ - __HAL_CRYP_DISABLE(hcryp); + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); - /* Change state */ - hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; - hcryp->State = HAL_CRYP_STATE_READY; + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; - /* Process unlocked */ - __HAL_UNLOCK(hcryp); - return HAL_ERROR; - } + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; } - while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); - /* Clear CCF flag */ __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } /* if (headersize_in_bytes != 0U) */ + + /* Move to payload phase if header length is null or + if the header length was less than 16 and header written by software instead of DMA */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; } - } - else - { - /* Select header phase */ - CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + } /* if (headersize_in_bytes >= 16U) */ - /* Enable the CRYP peripheral */ - __HAL_CRYP_ENABLE(hcryp); - } /* Return function status */ return HAL_OK; } @@ -4868,9 +4923,25 @@ static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) uint32_t lastwordsize; uint32_t npblb; uint32_t mode; + uint32_t headersize_in_bytes; + uint32_t tmp; + uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */ + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } /***************************** Header phase *********************************/ - if (hcryp->Init.HeaderSize == hcryp->CrypHeaderCount) + /* Test whether or not the header phase is over. + If the test below is true, move to payload phase */ + if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) { /* Set the phase */ hcryp->Phase = CRYP_PHASE_PROCESS; @@ -4953,11 +5024,19 @@ static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) hcryp->Instance->DINR = 0x0U; loopcounter++; } + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ } } - else if ((((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount)) >= 4U)) + else if ((((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U)) { - + /* Can enter full 4 header words */ #if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) /* If suspension flag has been raised, suspend processing only if not already at the end of the header */ @@ -4992,19 +5071,40 @@ static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) hcryp->CrypHeaderCount++; } } - else /*HeaderSize < 4 or HeaderSize >4 & HeaderSize %4 != 0*/ + else /* Write last header block (4 words), padded with zeros if needed */ { - /* Last block optionally pad the data with zeros*/ - for (loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize % 4U); loopcounter++) + + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) { hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); hcryp->CrypHeaderCount++ ; } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++; + /* Pad the data with zeros to have a complete block */ while (loopcounter < 4U) { - /* pad the data with zeros to have a complete block */ hcryp->Instance->DINR = 0x0U; loopcounter++; + hcryp->CrypHeaderCount++; + } } } } @@ -5014,6 +5114,7 @@ static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains * the configuration information for CRYP module. * @param Timeout Timeout duration. + * @note This function can only be used in thread mode. * @retval HAL status */ static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) @@ -5037,6 +5138,47 @@ static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t T return HAL_OK; } +/** + * @brief Wait for Computation Complete Flag (CCF) to raise then clear it. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @note This function can be used in thread or handler mode. + * @retval HAL status + */ +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t count = Timeout; + + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + hcryp->State = HAL_CRYP_STATE_READY; + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); +} #if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) /** @@ -5343,7 +5485,7 @@ static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) hcryp->CrypInCount++; if((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) { - /* Call output transfer complete callback */ + /* Call input transfer complete callback */ #if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) /*Call registered Input complete callback*/ hcryp->InCpltCallback(hcryp); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c index ce938822f7..e7c9a5ca9b 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c @@ -607,6 +607,7 @@ static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32 * @arg @ref OB_STOP_RST or @ref OB_STOP_NORST * @arg @ref OB_STANDBY_RST or @ref OB_STANDBY_NORST * @arg @ref OB_SHUTDOWN_RST or @ref OB_SHUTDOWN_NORST + * @arg @ref OB_IRH_ENABLE or @ref OB_IRH_DISABLE (*) * @arg @ref OB_IWDG_SW or @ref OB_IWDG_HW * @arg @ref OB_IWDG_STOP_FREEZE or @ref OB_IWDG_STOP_RUN * @arg @ref OB_IWDG_STDBY_FREEZE or @ref OB_IWDG_STDBY_RUN @@ -616,6 +617,7 @@ static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32 * @arg @ref OB_SRAM2_RST_ERASE or @ref OB_SRAM2_RST_NOT_ERASE * @arg @ref OB_BOOT0_FROM_OB or @ref OB_BOOT0_FROM_PIN * @arg @ref OB_BOOT0_RESET or @ref OB_BOOT0_SET + * @arg @ref OB_RESET_MODE_INPUT_ONLY or @ref OB_RESET_MODE_GPIO or @ref OB_RESET_MODE_INPUT_OUTPUT (*) * @arg @ref OB_AGC_TRIM_0 or @ref OB_AGC_TRIM_1 or ... or @ref OB_AGC_TRIM_7 * @param RDPLevel: specifies the read protection level. * This parameter can be one of the following values: @@ -768,21 +770,35 @@ static void FLASH_OB_SecureConfig(FLASH_OBProgramInitTypeDef *pOBParam) MODIFY_REG(sfr_reg_val, FLASH_SFR_SFSA, (((pOBParam->SecureFlashStartAddr - FLASH_BASE) / FLASH_PAGE_SIZE) << FLASH_SFR_SFSA_Pos)); /* Configure SRRVR register */ +#if defined(FLASH_SRRVR_SBRSA_A) + MODIFY_REG(srrvr_reg_val, (FLASH_SRRVR_SBRSA_A | FLASH_SRRVR_SBRSA_B), \ + (((((pOBParam->SecureRAM2aStartAddr - SRAM2A_BASE) >> SRAM_SECURE_PAGE_GRANULARITY_OFFSET) << FLASH_SRRVR_SBRSA_A_Pos)) | \ + ((((pOBParam->SecureRAM2bStartAddr - SRAM2B_BASE) >> SRAM_SECURE_PAGE_GRANULARITY_OFFSET) << FLASH_SRRVR_SBRSA_B_Pos)))); +#else MODIFY_REG(srrvr_reg_val, (FLASH_SRRVR_SBRSA | FLASH_SRRVR_SNBRSA), \ (((((pOBParam->SecureRAM2aStartAddr - SRAM2A_BASE) >> SRAM_SECURE_PAGE_GRANULARITY_OFFSET) << FLASH_SRRVR_SBRSA_Pos)) | \ ((((pOBParam->SecureRAM2bStartAddr - SRAM2B_BASE) >> SRAM_SECURE_PAGE_GRANULARITY_OFFSET) << FLASH_SRRVR_SNBRSA_Pos)))); +#endif /* If Full System Secure mode is requested, clear all the corresponding bit */ /* Else set the corresponding bit */ if (pOBParam->SecureMode == SYSTEM_IN_SECURE_MODE) { CLEAR_BIT(sfr_reg_val, FLASH_SFR_FSD); +#if defined(FLASH_SRRVR_BRSD_A) + CLEAR_BIT(srrvr_reg_val, (FLASH_SRRVR_BRSD_A | FLASH_SRRVR_BRSD_B)); +#else CLEAR_BIT(srrvr_reg_val, (FLASH_SRRVR_BRSD | FLASH_SRRVR_NBRSD)); +#endif } else { SET_BIT(sfr_reg_val, FLASH_SFR_FSD); +#if defined(FLASH_SRRVR_BRSD_A) + SET_BIT(srrvr_reg_val, (FLASH_SRRVR_BRSD_A | FLASH_SRRVR_BRSD_B)); +#else SET_BIT(srrvr_reg_val, (FLASH_SRRVR_BRSD | FLASH_SRRVR_NBRSD)); +#endif } /* Update Flash registers */ @@ -870,6 +886,7 @@ static uint32_t FLASH_OB_GetRDP(void) * @arg @ref OB_STOP_RST or @ref OB_STOP_RST * @arg @ref OB_STANDBY_RST or @ref OB_STANDBY_NORST * @arg @ref OB_SHUTDOWN_RST or @ref OB_SHUTDOWN_NORST + * @arg @ref OB_IRH_ENABLE or @ref OB_IRH_DISABLE (*) * @arg @ref OB_IWDG_SW or @ref OB_IWDG_HW * @arg @ref OB_IWDG_STOP_FREEZE or @ref OB_IWDG_STOP_RUN * @arg @ref OB_IWDG_STDBY_FREEZE or @ref OB_IWDG_STDBY_RUN @@ -879,6 +896,7 @@ static uint32_t FLASH_OB_GetRDP(void) * @arg @ref OB_SRAM2_RST_ERASE or @ref OB_SRAM2_RST_NOT_ERASE * @arg @ref OB_BOOT0_FROM_OB or @ref OB_BOOT0_FROM_PIN * @arg @ref OB_BOOT0_RESET or @ref OB_BOOT0_SET + * @arg @ref OB_RESET_MODE_INPUT_ONLY or @ref OB_RESET_MODE_GPIO or @ref OB_RESET_MODE_INPUT_OUTPUT (*) * @arg @ref OB_AGC_TRIM_0 or @ref OB_AGC_TRIM_1 or ... or @ref OB_AGC_TRIM_7 */ static uint32_t FLASH_OB_GetUser(void) @@ -952,12 +970,20 @@ static void FLASH_OB_GetSecureMemoryConfig(uint32_t *SecureFlashStartAddr, uint3 *SecureFlashStartAddr = ((user_config * FLASH_PAGE_SIZE) + FLASH_BASE); /* Get Secure SRAM2a start address */ +#if defined(FLASH_SRRVR_SBRSA_A) + user_config = (READ_BIT(srrvr_reg_val, FLASH_SRRVR_SBRSA_A) >> FLASH_SRRVR_SBRSA_A_Pos); +#else user_config = (READ_BIT(srrvr_reg_val, FLASH_SRRVR_SBRSA) >> FLASH_SRRVR_SBRSA_Pos); +#endif *SecureRAM2aStartAddr = ((user_config << SRAM_SECURE_PAGE_GRANULARITY_OFFSET) + SRAM2A_BASE); /* Get Secure SRAM2b start address */ +#if defined(FLASH_SRRVR_SBRSA_B) + user_config = (READ_BIT(srrvr_reg_val, FLASH_SRRVR_SBRSA_B) >> FLASH_SRRVR_SBRSA_B_Pos); +#else user_config = (READ_BIT(srrvr_reg_val, FLASH_SRRVR_SNBRSA) >> FLASH_SRRVR_SNBRSA_Pos); +#endif *SecureRAM2bStartAddr = ((user_config << SRAM_SECURE_PAGE_GRANULARITY_OFFSET) + SRAM2B_BASE); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c index 9f0e2ce88f..6e9af79aec 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c @@ -93,7 +93,7 @@ [..] (+) A specific option field manage the different steps of a sequential transfer (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below: - (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address and data to transfer without a final stop condition (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address @@ -112,7 +112,7 @@ or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). - Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the oposite interface Receive or Transmit + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit without stopping the communication and so generate a restart condition. (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential interface. @@ -122,7 +122,7 @@ or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. - (+) Differents sequential I2C interfaces are listed below: + (+) Different sequential I2C interfaces are listed below: (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT() or using @ref HAL_I2C_Master_Seq_Transmit_DMA() (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can @@ -4835,7 +4835,7 @@ static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint { /* Write data to TXDR only if XferCount not reach "0" */ /* A TXIS flag can be set, during STOP treatment */ - /* Check if all Datas have already been sent */ + /* Check if all data have already been sent */ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ if (hi2c->XferCount > 0U) { @@ -5719,7 +5719,7 @@ static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) } else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) { - /* Call the Sequential Complete callback, to inform upper layer of the end of Tranfer */ + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ I2C_ITSlaveSeqCplt(hi2c); hi2c->XferOptions = I2C_NO_OPTION_FRAME; @@ -5856,7 +5856,7 @@ static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) /* Disable all interrupts */ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); - /* If state is an abort treatment on goind, don't change state */ + /* If state is an abort treatment on going, don't change state */ /* This change will be do later */ if (hi2c->State != HAL_I2C_STATE_ABORT) { @@ -6570,7 +6570,7 @@ static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) } /** - * @brief Convert I2Cx OTHER_xxx XferOptions to functionnal XferOptions. + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. * @param hi2c I2C handle. * @retval None */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c index 58aee4dc22..f30dbec196 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_irda.c @@ -2230,7 +2230,7 @@ static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) uint32_t tmpreg; IRDA_ClockSourceTypeDef clocksource; HAL_StatusTypeDef ret = HAL_OK; - const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; uint32_t pclk; /* Check the communication parameters */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c index a522899510..3174654f6d 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_iwdg.c @@ -47,7 +47,7 @@ [..] Default timeout value (necessary for IWDG_SR status register update): Constant LSI_VALUE is defined based on the nominal LSI clock frequency. - This frequency being subject to variations as mentioned above, the + This frequency being subject to variations as mentioned above, the default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT below) may become too short or too long. In such cases, this default timeout value can be tuned by redefining diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c index 2023624982..6913cae1e6 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c @@ -188,10 +188,10 @@ */ #if defined(LPTIM2) #define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \ - (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT()) + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT()) #define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \ - (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT()) + (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT()) #else #define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() @@ -215,8 +215,8 @@ static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t */ /** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions. - * + * @brief Initialization and Configuration functions. + * @verbatim ============================================================================== ##### Initialization and de-initialization functions ##### @@ -253,19 +253,17 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source)); assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler)); - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity)); + assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); } assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source)); if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) { assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge)); - } - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) - { assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime)); - assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime)); } assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity)); assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode)); @@ -299,21 +297,18 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) /* Get the LPTIMx CFGR value */ tmpcfgr = hlptim->Instance->CFGR; - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL)); + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT)); } if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRIGSEL)); - } - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC) - { - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_CKFLT)); + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL)); } - /* Clear CKSEL, CKPOL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ - tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_CKPOL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD | + /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */ + tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD | LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE)); /* Set initialization parameters */ @@ -332,19 +327,21 @@ HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim) hlptim->Init.UltraLowPowerClock.SampleTime); } - /* Configure the active edge or edges used by the counter only if LPTIM is - * clocked by an external clock source - */ - if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + /* Configure LPTIM external clock polarity and digital filter */ + if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM) + || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { - tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity); + tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity | + hlptim->Init.UltraLowPowerClock.SampleTime); } + /* Configure LPTIM external trigger */ if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE) { /* Enable External trigger and set the trigger source */ - tmpcfgr |= (hlptim->Init.Trigger.Source | - hlptim->Init.Trigger.ActiveEdge); + tmpcfgr |= (hlptim->Init.Trigger.Source | + hlptim->Init.Trigger.ActiveEdge | + hlptim->Init.Trigger.SampleTime); } /* Write to LPTIMx CFGR */ @@ -468,8 +465,8 @@ __weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim) */ /** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions - * @brief Start-Stop operation functions. - * + * @brief Start-Stop operation functions. + * @verbatim ============================================================================== ##### LPTIM Start Stop operation functions ##### @@ -1594,7 +1591,8 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t hlptim->State = HAL_LPTIM_STATE_BUSY; /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ - if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) + && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { /* Check if clock is prescaled */ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); @@ -1675,7 +1673,8 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32 __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance); /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */ - if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) + if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) + && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL)) { /* Check if clock is prescaled */ assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler)); @@ -1766,8 +1765,8 @@ HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim) */ /** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions - * @brief Read operation functions. - * + * @brief Read operation functions. + * @verbatim ============================================================================== ##### LPTIM Read operation functions ##### @@ -1824,8 +1823,8 @@ uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim) */ /** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks - * @brief LPTIM IRQ handler. - * + * @brief LPTIM IRQ handler. + * @verbatim ============================================================================== ##### LPTIM IRQ handler and callbacks ##### @@ -2292,8 +2291,8 @@ HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlpti */ /** @defgroup LPTIM_Group5 Peripheral State functions - * @brief Peripheral State functions. - * + * @brief Peripheral State functions. + * @verbatim ============================================================================== ##### Peripheral State functions ##### @@ -2368,8 +2367,7 @@ static HAL_StatusTypeDef LPTIM_WaitForFlag(LPTIM_HandleTypeDef *hlptim, uint32_t { result = HAL_TIMEOUT; } - } - while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); + } while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL)); return result; } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c index 7beb47275d..4d05a7f326 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c @@ -88,6 +88,8 @@ */ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, PCD_EPTypeDef *ep, uint16_t wEPVal); /** * @} @@ -99,8 +101,8 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); */ /** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * + * @brief Initialization and Configuration functions + * @verbatim =============================================================================== ##### Initialization and de-initialization functions ##### @@ -204,7 +206,7 @@ HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) { (void)HAL_PCDEx_ActivateLPM(hpcd); } - + return HAL_OK; } @@ -224,7 +226,10 @@ HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) hpcd->State = HAL_PCD_STATE_BUSY; /* Stop Device */ - (void)HAL_PCD_Stop(hpcd); + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) if (hpcd->MspDeInitCallback == NULL) @@ -293,7 +298,9 @@ __weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -503,7 +510,8 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_Ca * @param pCallback pointer to the USB PCD Data OUT Stage Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -538,7 +546,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, } /** - * @brief UnRegister the USB PCD Data OUT Stage Callback + * @brief Unregister the USB PCD Data OUT Stage Callback * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -576,7 +584,8 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd * @param pCallback pointer to the USB PCD Data IN Stage Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -611,7 +620,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, p } /** - * @brief UnRegister the USB PCD Data IN Stage Callback + * @brief Unregister the USB PCD Data IN Stage Callback * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -649,7 +658,8 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -684,7 +694,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, } /** - * @brief UnRegister the USB PCD Iso OUT incomplete Callback + * @brief Unregister the USB PCD Iso OUT incomplete Callback * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -722,7 +732,8 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -757,7 +768,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, p } /** - * @brief UnRegister the USB PCD Iso IN incomplete Callback + * @brief Unregister the USB PCD Iso IN incomplete Callback * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -830,7 +841,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdC } /** - * @brief UnRegister the USB PCD BCD Callback + * @brief Unregister the USB PCD BCD Callback * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -903,7 +914,7 @@ HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmC } /** - * @brief UnRegister the USB PCD LPM Callback + * @brief Unregister the USB PCD LPM Callback * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback * @param hpcd PCD handle * @retval HAL status @@ -940,8 +951,8 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) */ /** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions - * @brief Data transfers functions - * + * @brief Data transfers functions + * @verbatim =============================================================================== ##### IO operation functions ##### @@ -962,9 +973,10 @@ HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); - (void)USB_DevConnect(hpcd->Instance); __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); + return HAL_OK; } @@ -977,9 +989,7 @@ HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) { __HAL_LOCK(hpcd); __HAL_PCD_DISABLE(hpcd); - - (void)USB_StopDevice(hpcd->Instance); - + (void)USB_DevDisconnect(hpcd->Instance); __HAL_UNLOCK(hpcd); return HAL_OK; @@ -1288,8 +1298,8 @@ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) */ /** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * + * @brief management functions + * @verbatim =============================================================================== ##### Peripheral Control functions ##### @@ -1312,6 +1322,7 @@ HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) __HAL_LOCK(hpcd); (void)USB_DevConnect(hpcd->Instance); __HAL_UNLOCK(hpcd); + return HAL_OK; } @@ -1325,6 +1336,7 @@ HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) __HAL_LOCK(hpcd); (void)USB_DevDisconnect(hpcd->Instance); __HAL_UNLOCK(hpcd); + return HAL_OK; } @@ -1340,6 +1352,7 @@ HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) hpcd->USB_Address = address; (void)USB_SetDevAddress(hpcd->Instance, address); __HAL_UNLOCK(hpcd); + return HAL_OK; } /** @@ -1350,7 +1363,8 @@ HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) * @param ep_type endpoint type * @retval HAL status */ -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) { HAL_StatusTypeDef ret = HAL_OK; PCD_EPTypeDef *ep; @@ -1477,6 +1491,8 @@ HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, /*setup and start the Xfer */ ep->xfer_buff = pBuf; ep->xfer_len = len; + ep->xfer_fill_db = 1U; + ep->xfer_len_db = len; ep->xfer_count = 0U; ep->is_in = 1U; ep->num = ep_addr & EP_ADDR_MSK; @@ -1525,10 +1541,7 @@ HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) __HAL_LOCK(hpcd); (void)USB_EPSetStall(hpcd->Instance, ep); - if ((ep_addr & EP_ADDR_MSK) == 0U) - { - (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); - } + __HAL_UNLOCK(hpcd); return HAL_OK; @@ -1610,8 +1623,8 @@ HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) */ /** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * + * @brief Peripheral State functions + * @verbatim =============================================================================== ##### Peripheral State functions ##### @@ -1656,15 +1669,14 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) { PCD_EPTypeDef *ep; - uint16_t count; - uint16_t wIstr; - uint16_t wEPVal; + uint16_t count, wIstr, wEPVal, TxByteNbre; uint8_t epindex; /* stay in loop while pending interrupts */ while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U) { wIstr = hpcd->Instance->ISTR; + /* extract highest priority endpoint number */ epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); @@ -1725,7 +1737,6 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) HAL_PCD_SetupStageCallback(hpcd); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } - else if ((wEPVal & USB_EP_CTR_RX) != 0U) { PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); @@ -1748,27 +1759,31 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ } - PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); - PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + if ((PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0) & USB_EP_SETUP) == 0U) + { + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } } } } else { /* Decode and service non control endpoints interrupt */ - /* process related endpoint register */ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); + if ((wEPVal & USB_EP_CTR_RX) != 0U) { /* clear int flag */ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); ep = &hpcd->OUT_ep[epindex]; - /* OUT double Buffering */ + /* OUT Single Buffering */ if (ep->doublebuffer == 0U) { count = (uint16_t)PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + if (count != 0U) { USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); @@ -1776,25 +1791,35 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) } else { - /* free EP OUT Buffer */ - PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); - - if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) + /* manage double buffer bulk out */ + if (ep->type == EP_TYPE_BULK) { - /* read from endpoint BUF0Addr buffer */ - count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - if (count != 0U) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); - } + count = HAL_PCD_EP_DB_Receive(hpcd, ep, wEPVal); } - else + else /* manage double buffer iso out */ { - /* read from endpoint BUF1Addr buffer */ - count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - if (count != 0U) + /* free EP OUT Buffer */ + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + + if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) != 0U) { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + /* read from endpoint BUF0Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /* read from endpoint BUF1Addr buffer */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } } } } @@ -1813,10 +1838,10 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) } else { - (void)HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + (void) USB_EPStartXfer(hpcd->Instance, ep); } - } /* if((wEPVal & EP_CTR_RX) */ + } if ((wEPVal & USB_EP_CTR_TX) != 0U) { @@ -1825,31 +1850,301 @@ static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) /* clear int flag */ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); - /* multi-packet on the NON control IN endpoint */ - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff += ep->xfer_count; + /* Manage Bulk Single Buffer Transaction */ + if ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U)) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* Transfer is not yet Done */ + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + (void)USB_EPStartXfer(hpcd->Instance, ep); + } + } + /* Double Buffer Iso/bulk IN (bulk transfer Len > Ep_Mps) */ + else + { + (void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal); + } + } + } + } + + return HAL_OK; +} + + +/** + * @brief Manage double buffer bulk out transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static uint16_t HAL_PCD_EP_DB_Receive(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint16_t count; + + /* Manage Buffer0 OUT */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + /* Get count of received Data on buffer0 */ + count = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK to OUT endpoint since double buffer is enabled */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /* Check if Buffer1 is in blocked sate which requires to toggle */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + /* Manage Buffer 1 DTOG_RX=0 */ + else + { + /* Get count of received data */ + count = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= count) + { + ep->xfer_len -= count; + } + else + { + ep->xfer_len = 0U; + } + + if (ep->xfer_len == 0U) + { + /* set NAK on the current endpoint */ + PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK); + } + + /*Need to FreeUser Buffer*/ + if ((wEPVal & USB_EP_DTOG_TX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U); + } + + if (count != 0U) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + + return count; +} - /* Zero Length Packet? */ - if (ep->xfer_len == 0U) + +/** + * @brief Manage double buffer bulk IN transaction from ISR + * @param hpcd PCD handle + * @param ep current endpoint handle + * @param wEPVal Last snapshot of EPRx register value taken in ISR + * @retval HAL status + */ +static HAL_StatusTypeDef HAL_PCD_EP_DB_Transmit(PCD_HandleTypeDef *hpcd, + PCD_EPTypeDef *ep, uint16_t wEPVal) +{ + uint32_t len; + uint16_t TxByteNbre; + + /* Data Buffer0 ACK received */ + if ((wEPVal & USB_EP_DTOG_TX) != 0U) + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len > TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, ep->num); +#else + HAL_PCD_DataInStageCallback(hpcd, ep->num); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) != 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) { - /* TX COMPLETE */ + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; + } + else + { + ep->xfer_fill_db = 0U; + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Write remaining Data to Buffer */ + /* Set the Double buffer counter for pma buffer1 */ + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, (uint16_t)len); + } + } + } + else /* Data Buffer1 ACK received */ + { + /* multi-packet on the NON control IN endpoint */ + TxByteNbre = (uint16_t)PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_len >= TxByteNbre) + { + ep->xfer_len -= TxByteNbre; + } + else + { + ep->xfer_len = 0U; + } + + /* Transfer is completed */ + if (ep->xfer_len == 0U) + { + PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U); + + /* TX COMPLETE */ #if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) - hpcd->DataInStageCallback(hpcd, ep->num); + hpcd->DataInStageCallback(hpcd, ep->num); #else - HAL_PCD_DataInStageCallback(hpcd, ep->num); + HAL_PCD_DataInStageCallback(hpcd, ep->num); #endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + } + else /* Transfer is not yet Done */ + { + /* need to Free USB Buff */ + if ((wEPVal & USB_EP_DTOG_RX) == 0U) + { + PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U); + } + + /* Still there is data to Fill in the next Buffer */ + if (ep->xfer_fill_db == 1U) + { + ep->xfer_buff += TxByteNbre; + ep->xfer_count += TxByteNbre; + + /* Calculate the len of the new buffer to fill */ + if (ep->xfer_len_db >= ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len_db -= len; + } + else if (ep->xfer_len_db == 0U) + { + len = TxByteNbre; + ep->xfer_fill_db = 0U; } else { - (void)HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + ep->xfer_fill_db = 0; } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len); + + /* Copy the user buffer to USB PMA */ + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, (uint16_t)len); } } } + + /*enable endpoint IN*/ + PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID); + return HAL_OK; } + /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c index 77ba28213d..e6f93a2d8c 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c @@ -49,7 +49,7 @@ /** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions * @brief PCDEx control functions - * + * @verbatim =============================================================================== ##### Extended features functions ##### @@ -78,10 +78,8 @@ * @retval HAL status */ -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, - uint16_t ep_addr, - uint16_t ep_kind, - uint32_t pmaadress) +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, + uint16_t ep_kind, uint32_t pmaadress) { PCD_EPTypeDef *ep; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c index af8a039fd4..d91020508b 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c @@ -127,11 +127,13 @@ void HAL_PWR_DeInit(void) /* Clear all flags */ LL_PWR_WriteReg(SCR, - LL_PWR_SCR_CC2HF - | LL_PWR_SCR_C802AF + LL_PWR_SCR_CC2HF | LL_PWR_SCR_CBLEAF | LL_PWR_SCR_CCRPEF +#if defined(PWR_CR3_E802A) + | LL_PWR_SCR_C802AF | LL_PWR_SCR_C802WUF +#endif | LL_PWR_SCR_CBLEWUF #if defined(PWR_CR5_SMPSEN) | LL_PWR_SCR_CBORHF @@ -222,8 +224,9 @@ void HAL_PWR_DisableBkUpAccess(void) (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on. (+) Stop 2 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on, reduced set of waking up IPs compared to Stop 1 mode. - (+) Standby mode with SRAM2: all clocks are stopped except LSI and LSE, SRAM2 content preserved, main regulator off, low power regulator on. - (+) Standby mode without SRAM2: all clocks are stopped except LSI and LSE, main and low power regulators off. + (+) Standby mode with SRAM2a: all clocks are stopped except LSI and LSE, SRAM2a content preserved, main regulator off, low power regulator on. + Note: On devices STM32WB15xx, STM32WB10xx, retention is extended to SRAM1, SRAM2a, SRAM2b. + (+) Standby mode without SRAM2a: all clocks are stopped except LSI and LSE, main and low power regulators off. (+) Shutdown mode: all clocks are stopped except LSE, main and low power regulators off. @@ -266,6 +269,7 @@ void HAL_PWR_DisableBkUpAccess(void) The Stop 0, Stop 1 or Stop 2 modes are entered thru the following API's: (++) HAL_PWREx_EnterSTOP0Mode() for mode 0, HAL_PWREx_EnterSTOP1Mode() for mode 1, HAL_PWREx_EnterSTOP2Mode() for mode 2 or for porting reasons HAL_PWR_EnterSTOPMode(). + Note: Low power Stop2 mode is not available on devices STM32WB15xx, STM32WB10xx. (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only): (++) PWR_MAINREGULATOR_ON: Regulator in main mode (STOP0 mode) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c index 3b394c622f..37ede3ebe7 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c @@ -281,7 +281,7 @@ void HAL_PWREx_DisableBLEActivityIT(void) CLEAR_BIT(PWR->CR3, PWR_CR3_EBLEA); } - +#if defined(PWR_CR3_E802A) /** * @brief Enable 802.15.4 Activity interrupt. * @retval None @@ -299,6 +299,7 @@ void HAL_PWREx_Disable802ActivityIT(void) { CLEAR_BIT(PWR->CR3, PWR_CR3_E802A); } +#endif /** * @brief Enable CPU2 on-Hold interrupt. @@ -640,9 +641,11 @@ void HAL_PWREx_ReleaseCore(uint32_t CPU) /****************************************************************************/ /** - * @brief Enable BKRAM content retention in Standby mode. - * @note When RRS bit is set, SRAM is powered by the low-power regulator in + * @brief Enable SRAM2a content retention in Standby mode. + * @note When RRS bit is set, SRAM2a is powered by the low-power regulator in * Standby mode and its content is kept. + * @note On devices STM32WB15xx, STM32WB10xx, retention is extended + * to SRAM1, SRAM2a and SRAM2b. * @retval None */ void HAL_PWREx_EnableSRAMRetention(void) @@ -651,9 +654,11 @@ void HAL_PWREx_EnableSRAMRetention(void) } /** - * @brief Disable BKRAM content retention in Standby mode. - * @note When RRS bit is reset, SRAM is powered off in Standby mode + * @brief Disable SRAM2a content retention in Standby mode. + * @note When RRS bit is reset, SRAM2a is powered off in Standby mode * and its content is lost. + * @note On devices STM32WB15xx, STM32WB10xx, retention is extended + * to SRAM1, SRAM2a and SRAM2b. * @retval None */ void HAL_PWREx_DisableSRAMRetention(void) @@ -678,7 +683,7 @@ void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode) if((PowerMode & PWR_FLASHPD_LPRUN) != 0U) { /* Unlock bit FPDR */ - WRITE_REG(PWR->CR1, 0x0000C1B0U); + WRITE_REG(PWR->CR1, 0x0000C1B0UL); } /* Set flash power down mode */ @@ -910,7 +915,7 @@ HAL_StatusTypeDef HAL_PWREx_ConfigSMPS(PWR_SMPSTypeDef *sConfigSMPS) * * (1) SMPS operating mode step down or open depends on system low-power mode: * - step down mode if system low power mode is run, LP run or stop, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown * @retval None */ void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode) @@ -924,7 +929,7 @@ void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode) * requested operating mode can differ from effective low power mode. * - dependency on system low-power mode: * - step down mode if system low power mode is run, LP run or stop, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown * - dependency on BOR level: * - bypass mode if supply voltage drops below BOR level * @note This functions check flags of SMPS operating modes step down @@ -936,7 +941,7 @@ void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode) * * (1) SMPS operating mode step down or open depends on system low-power mode: * - step down mode if system low power mode is run, LP run or stop, - * - open mode if system low power mode is stop1, stop2, standby or shutdown + * - open mode if system low power mode is Stop1, Stop2, Standby or Shutdown */ uint32_t HAL_PWREx_SMPS_GetEffectiveMode(void) { @@ -1129,7 +1134,6 @@ void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry) CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); } - /** * @brief Enter Stop 1 mode. * @note In Stop 1 mode, only low power voltage regulator is ON. @@ -1182,7 +1186,7 @@ void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry) CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); } - +#if defined(PWR_SUPPORT_STOP2) /** * @brief Enter Stop 2 mode. * @note In Stop 2 mode, only low power voltage regulator is ON. @@ -1244,10 +1248,7 @@ void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry) /* Reset SLEEPDEEP bit of Cortex System Control Register */ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); } - - - - +#endif /** * @brief Enter Shutdown mode. diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c index 2d153f357e..d591a17caa 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c @@ -320,11 +320,6 @@ HAL_StatusTypeDef HAL_RCC_DeInit(void) CLEAR_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSIKERON | RCC_CR_HSIASFS | RCC_CR_HSEON | RCC_CR_HSEPRE | RCC_CR_PLLON); #endif -#if defined(RCC_CR_HSEBYP) - /* Reset HSEBYP bit once HSE is OFF */ - LL_RCC_HSE_DisableBypass(); -#endif - /* Get Start Tick*/ tickstart = HAL_GetTick(); @@ -454,7 +449,8 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } /* Update the SystemCoreClock global variable */ - SystemCoreClockUpdate(); + SystemCoreClock = HAL_RCC_GetHCLKFreq(); + if (HAL_InitTick(uwTickPrio) != HAL_OK) { return HAL_ERROR; @@ -822,6 +818,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } } +#if defined(RCC_HSI48_SUPPORT) /*------------------------------ HSI48 Configuration -----------------------*/ if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) { @@ -864,6 +861,7 @@ HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) } } } +#endif /*-------------------------------- PLL Configuration -----------------------*/ /* Check the parameters */ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); @@ -1261,7 +1259,8 @@ HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, ui /*---------------------------------------------------------------------------*/ /* Update the SystemCoreClock global variable */ - SystemCoreClockUpdate(); + SystemCoreClock = HAL_RCC_GetHCLKFreq(); + /* Configure the source of time base considering new system clocks settings*/ return HAL_InitTick(HAL_GetTickPrio()); } @@ -1530,25 +1529,17 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) /* Set all possible values for the Oscillator type parameter ---------------*/ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ - RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI1 | RCC_OSCILLATORTYPE_LSI2 | RCC_OSCILLATORTYPE_HSI48; + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI1 | RCC_OSCILLATORTYPE_LSI2; +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType |= RCC_OSCILLATORTYPE_HSI48; +#endif /* Get the HSE configuration -----------------------------------------------*/ -#if defined(RCC_CR_HSEBYP) - if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } -#else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) { RCC_OscInitStruct->HSEState = RCC_HSE_ON; } -#endif else { RCC_OscInitStruct->HSEState = RCC_HSE_OFF; @@ -1604,6 +1595,7 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) RCC_OscInitStruct->LSIState = RCC_LSI_OFF; } +#if defined(RCC_HSI48_SUPPORT) /* Get the HSI48 configuration ---------------------------------------------*/ if ((RCC->CRRCR & RCC_CRRCR_HSI48ON) == RCC_CRRCR_HSI48ON) { @@ -1613,7 +1605,7 @@ void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) { RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; } - +#endif /* Get the PLL configuration -----------------------------------------------*/ if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c index 8554028425..5e9b357334 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c @@ -139,7 +139,6 @@ static uint32_t RCC_PLLSAI1_GetFreqDomain_Q(void); * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock * @arg @ref RCC_PERIPHCLK_RFWAKEUP RFWKP peripheral clock * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock * * * @note Care must be taken when @ref HAL_RCCEx_PeriphCLKConfig() is used to select @@ -429,23 +428,6 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk } #endif -#if defined(SPI_I2S_SUPPORT) - /*-------------------- I2S clock source configuration ----------------------*/ - if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S)) - { - /* Check the parameters */ - assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection)); - - /* Configure the I2S clock source */ - __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection); - - if (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLL) - { - /* Enable RCC_PLL_I2SCLK output */ - __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_I2SCLK); - } - } -#endif return status; } @@ -456,7 +438,7 @@ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClk * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that * returns the configuration information for the Extended Peripherals * clocks(SAI1, LPTIM1, LPTIM2, I2C1, I2C3, LPUART1, - * USART1, RTC, ADCx, USB, RNG, RFWKP, SMPS, I2S). + * USART1, RTC, ADCx, USB, RNG, RFWKP, SMPS). * @retval None */ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) @@ -487,9 +469,6 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SMPS; #endif -#if defined(SPI_I2S_SUPPORT) - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S; -#endif #if defined(SAI1) /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ @@ -551,10 +530,6 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) PeriphClkInit->SmpsClockSelection = __HAL_RCC_GET_SMPS_SOURCE(); #endif -#if defined(SPI_I2S_SUPPORT) - /* Get the I2S clock source -----------------------------------------------*/ - PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2S_SOURCE(); -#endif } /** @@ -575,7 +550,6 @@ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock * @arg @ref RCC_PERIPHCLK_RFWAKEUP RFWKP peripheral clock * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock * @retval Frequency in Hz */ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) @@ -724,6 +698,7 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } else /* HSI48 clock divided by 3 used as RNG clock source */ { +#if defined(RCC_HSI48_SUPPORT) if (LL_RCC_HSI48_IsReady() == 1U) { frequency = HSI48_VALUE / 3U; @@ -732,6 +707,9 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) { /* Nothing to do as frequency already initialized to 0U */ } +#else + /* Nothing to do as frequency already initialized to 0U */ +#endif } } #if defined(USB) @@ -876,6 +854,17 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) /* Nothing to do as frequency already initialized to 0U */ } break; +#elif defined(STM32WB15xx) + case LL_RCC_ADC_CLKSOURCE_HSI: /* HSI clock used as ADC clock source */ + if (LL_RCC_HSI_IsReady() == 1U) + { + frequency = HSI_VALUE; + } + else + { + /* Nothing to do as frequency already initialized to 0U */ + } + break; #endif case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */ frequency = HAL_RCC_GetSysClockFreq(); @@ -1050,19 +1039,6 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) /* Nothing to do as frequency already initialized to 0U */ } } - else if (rfwkpClockSource == LL_RCC_RFWKP_CLKSOURCE_LSI) /* LSI clock used as RF Wakeup clock source */ - { - const uint32_t temp_lsi1ready = LL_RCC_LSI1_IsReady(); - const uint32_t temp_lsi2ready = LL_RCC_LSI2_IsReady(); - if ((temp_lsi1ready == 1U) || (temp_lsi2ready == 1U)) - { - frequency = LSI_VALUE; - } - else - { - /* Nothing to do as frequency already initialized to 0U */ - } - } else if (rfwkpClockSource == LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024) /* HSE clock used as RF Wakeup clock source */ { frequency = HSE_VALUE / 1024U; @@ -1128,32 +1104,6 @@ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) } } #endif -#if defined(SPI_I2S_SUPPORT) - if (PeriphClk == RCC_PERIPHCLK_I2S) - { - switch (LL_RCC_GetI2SClockSource(LL_RCC_I2S_CLKSOURCE)) - { - case LL_RCC_I2S_CLKSOURCE_PIN: /* I2S Clock is External clock */ - frequency = EXTERNAL_CLOCK_VALUE; - break; - - case LL_RCC_I2S_CLKSOURCE_HSI: /* I2S Clock is HSI Osc. */ - if (LL_RCC_HSI_IsReady() == 1U) - { - frequency = HSI_VALUE; - } - break; - - case LL_RCC_I2S_CLKSOURCE_PLL: /* I2S Clock is PLL */ - frequency = RCC_PLL_GetFreqDomain_P(); - break; - - case LL_RCC_I2S_CLKSOURCE_NONE: /* No clock used as I2S clock source */ - default: - break; - } - } -#endif return (frequency); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c index 61d83e8458..65b44b92e1 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c @@ -318,7 +318,11 @@ HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) /* Exit Initialization mode */ hrtc->Instance->ISR &= ((uint32_t)~RTC_ISR_INIT); +#if defined(RTC_OR_ALARMOUTTYPE) hrtc->Instance->OR &= (uint32_t)~(RTC_OR_ALARMOUTTYPE | RTC_OR_OUT_RMP); +#else + hrtc->Instance->OR &= (uint32_t)~(RTC_OR_OUT_RMP); +#endif hrtc->Instance->OR |= (uint32_t)(hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c index 22f84da115..b697fd7d80 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard.c @@ -2326,7 +2326,7 @@ static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard uint32_t tmpreg; SMARTCARD_ClockSourceTypeDef clocksource; HAL_StatusTypeDef ret = HAL_OK; - const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; uint32_t pclk; /* Check the parameters */ @@ -2351,8 +2351,7 @@ static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard * Configure the Parity and Mode: * set PS bit according to hsmartcard->Init.Parity value * set TE and RE bits according to hsmartcard->Init.Mode value */ - tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode; - tmpreg |= (uint32_t) hsmartcard->Init.WordLength | hsmartcard->FifoMode; + tmpreg = ((uint32_t)(hsmartcard->Init.Parity)) | ((uint32_t)(hsmartcard->Init.Mode)) | ((uint32_t)(hsmartcard->Init.WordLength)); MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); /*-------------------------- USART CR2 Configuration -----------------------*/ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard_ex.c index aac6bfb827..2f2c098911 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smartcard_ex.c @@ -458,8 +458,8 @@ static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard) uint8_t rx_fifo_threshold; uint8_t tx_fifo_threshold; /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ - uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; - uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE) { diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smbus.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smbus.c index c5a24db3a5..9d336dd6ce 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smbus.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_smbus.c @@ -1854,7 +1854,7 @@ static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t /* Process Unlocked */ __HAL_UNLOCK(hsmbus); - /* REenable the selected SMBUS peripheral */ + /* Re-enable the selected SMBUS peripheral */ __HAL_SMBUS_ENABLE(hsmbus); /* Call the corresponding callback to inform upper layer of End of Transfer */ @@ -2616,7 +2616,7 @@ static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddre } /** - * @brief Convert SMBUSx OTHER_xxx XferOptions to functionnal XferOptions. + * @brief Convert SMBUSx OTHER_xxx XferOptions to functional XferOptions. * @param hsmbus SMBUS handle. * @retval None */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c index 5a07b9ef41..943d2e5c14 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c @@ -512,7 +512,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) { /* Check the parameters */ assert_param(IS_TIM_INSTANCE(htim->Instance)); - + /* Disable the TIM Update interrupt */ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); @@ -571,6 +571,7 @@ HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pDat /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1087,6 +1088,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1107,6 +1109,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1127,6 +1130,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -1146,6 +1150,7 @@ HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -1723,6 +1728,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -1743,6 +1749,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -1762,6 +1769,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Capture/Compare 3 request */ @@ -1781,6 +1789,7 @@ HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channe /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -2076,7 +2085,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) /* Check the TIM channel state */ if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -2158,7 +2167,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) /* Check the TIM channel state */ if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -2310,12 +2319,12 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Set the TIM channel state */ if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((pData == NULL) && (Length > 0U)) { @@ -2332,6 +2341,23 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel return HAL_ERROR; } + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + switch (Channel) { case TIM_CHANNEL_1: @@ -2346,6 +2372,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 1 DMA request */ @@ -2365,6 +2392,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -2384,6 +2412,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -2403,6 +2432,7 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 4 DMA request */ @@ -2414,23 +2444,6 @@ HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel break; } - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ - if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) - { - tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; - if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) - { - __HAL_TIM_ENABLE(htim); - } - } - else - { - __HAL_TIM_ENABLE(htim); - } - /* Return function status */ return HAL_OK; } @@ -2452,6 +2465,9 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + switch (Channel) { case TIM_CHANNEL_1: @@ -2490,9 +2506,6 @@ HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) break; } - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - /* Disable the Peripheral */ __HAL_TIM_DISABLE(htim); @@ -2685,11 +2698,12 @@ __weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) /** * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2704,9 +2718,9 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t Outpu /* Check the TIM channels state */ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -2721,7 +2735,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t Outpu (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together No need to enable the counter, it's enabled automatically by hardware (the counter starts in response to a stimulus and generate a pulse */ @@ -2741,11 +2755,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t Outpu /** * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2757,7 +2772,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t Output (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); @@ -2783,11 +2798,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t Output /** * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2802,9 +2818,9 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t Ou /* Check the TIM channels state */ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -2819,7 +2835,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t Ou (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together No need to enable the counter, it's enabled automatically by hardware (the counter starts in response to a stimulus and generate a pulse */ @@ -2845,11 +2861,12 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t Ou /** * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param OutputChannel See note above * @retval HAL status */ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) @@ -2867,7 +2884,7 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Out (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); @@ -3139,7 +3156,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe if (Channel == TIM_CHANNEL_1) { if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3152,7 +3169,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe else if (Channel == TIM_CHANNEL_2) { if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3165,9 +3182,9 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channe else { if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3257,7 +3274,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - else + else { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -3293,7 +3310,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha if (Channel == TIM_CHANNEL_1) { if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3306,7 +3323,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha else if (Channel == TIM_CHANNEL_2) { if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3319,9 +3336,9 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Cha else { if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -3419,7 +3436,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Chan TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - else + else { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -3459,12 +3476,12 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch if (Channel == TIM_CHANNEL_1) { if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((pData1 == NULL) && (Length > 0U)) { @@ -3484,12 +3501,12 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch else if (Channel == TIM_CHANNEL_2) { if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((pData2 == NULL) && (Length > 0U)) { @@ -3509,16 +3526,16 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch else { if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U)) { @@ -3552,6 +3569,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Input Capture DMA request */ @@ -3576,6 +3594,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Input Capture DMA request */ @@ -3601,6 +3620,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } @@ -3614,6 +3634,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Ch /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the Peripheral */ @@ -3692,7 +3713,7 @@ HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Cha TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); } - else + else { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -4419,8 +4440,8 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O * @arg TIM_DMABASE_CCMR3 * @arg TIM_DMABASE_CCR5 * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_AF1 - * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 * @param BurstRequestSrc TIM DMA Request sources * This parameter can be one of the following values: * @arg TIM_DMA_UPDATE: TIM update Interrupt source @@ -4436,14 +4457,68 @@ HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_O * @note This function should be used only when BurstLength is equal to DMA data transfer length. * @retval HAL status */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t *BurstBuffer, uint32_t BurstLength) +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) { /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) { @@ -4476,8 +4551,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4493,8 +4570,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4510,8 +4588,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4527,8 +4606,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4544,8 +4624,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4561,8 +4642,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4578,8 +4660,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, - (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8U) + 1U) != HAL_OK) + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4587,9 +4670,9 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t default: break; } - /* configure the DMA Burst Mode */ - htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); /* Enable the TIM DMA Request */ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); @@ -4605,7 +4688,6 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t */ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { - HAL_StatusTypeDef status = HAL_OK; /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); @@ -4614,54 +4696,51 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B { case TIM_DMA_UPDATE: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); break; } case TIM_DMA_CC1: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); break; } case TIM_DMA_CC2: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); break; } case TIM_DMA_CC3: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); break; } case TIM_DMA_CC4: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); break; } case TIM_DMA_COM: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); break; } case TIM_DMA_TRIGGER: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); break; } default: break; } - if (HAL_OK == status) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - } + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); /* Change the DMA burst operation state */ htim->DMABurstState = HAL_DMA_BURST_STATE_READY; /* Return function status */ - return status; + return HAL_OK; } /** @@ -4691,8 +4770,8 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B * @arg TIM_DMABASE_CCMR3 * @arg TIM_DMABASE_CCR5 * @arg TIM_DMABASE_CCR6 - * @arg TIM_DMABASE_AF1 - * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 * @param BurstRequestSrc TIM DMA Request sources * This parameter can be one of the following values: * @arg TIM_DMA_UPDATE: TIM update Interrupt source @@ -4711,11 +4790,65 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t B HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) { + return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) { @@ -4748,8 +4881,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4764,15 +4899,17 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; } case TIM_DMA_CC2: { - /* Set the DMA capture/compare callbacks */ + /* Set the DMA capture callbacks */ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; @@ -4780,8 +4917,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4796,8 +4935,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4812,8 +4953,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4828,8 +4971,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4844,8 +4989,10 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8U) + 1U) != HAL_OK) + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } break; @@ -4854,14 +5001,12 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B break; } - /* configure the DMA Burst Mode */ + /* Configure the DMA Burst Mode */ htim->Instance->DCR = (BurstBaseAddress | BurstLength); /* Enable the TIM DMA Request */ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - htim->State = HAL_TIM_STATE_READY; - /* Return function status */ return HAL_OK; } @@ -4874,7 +5019,6 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t B */ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) { - HAL_StatusTypeDef status = HAL_OK; /* Check the parameters */ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); @@ -4883,54 +5027,51 @@ HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t Bu { case TIM_DMA_UPDATE: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); break; } case TIM_DMA_CC1: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); break; } case TIM_DMA_CC2: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); break; } case TIM_DMA_CC3: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); break; } case TIM_DMA_CC4: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); break; } case TIM_DMA_COM: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); break; } case TIM_DMA_TRIGGER: { - status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); break; } default: break; } - if (HAL_OK == status) - { - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - } + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); /* Change the DMA burst operation state */ htim->DMABurstState = HAL_DMA_BURST_STATE_READY; /* Return function status */ - return status; + return HAL_OK; } /** @@ -5286,13 +5427,13 @@ HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockCo case TIM_CLOCKSOURCE_ITR1: case TIM_CLOCKSOURCE_ITR2: case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports internal trigger input */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); - break; - } + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } default: break; @@ -6258,12 +6399,12 @@ HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim) HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel) { HAL_TIM_ChannelStateTypeDef channel_state; - + /* Check the parameters */ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); - + return channel_state; } @@ -6276,7 +6417,7 @@ HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim) { /* Check the parameters */ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - + return htim->DMABurstState; } @@ -6340,14 +6481,14 @@ void TIM_DMAError(DMA_HandleTypeDef *hdma) * @param hdma pointer to DMA handle. * @retval None */ -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); @@ -6356,7 +6497,7 @@ void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -6365,7 +6506,7 @@ void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); @@ -6374,7 +6515,7 @@ void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); @@ -6445,7 +6586,7 @@ void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); @@ -6455,7 +6596,7 @@ void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -6465,7 +6606,7 @@ void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); @@ -6475,7 +6616,7 @@ void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); @@ -6660,7 +6801,7 @@ void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) /** * @brief Timer Output Compare 1 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6735,7 +6876,7 @@ static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 2 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6811,7 +6952,7 @@ void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 3 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6885,7 +7026,7 @@ static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 4 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) @@ -6945,7 +7086,7 @@ static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) /** * @brief Timer Output Compare 5 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, @@ -6998,7 +7139,7 @@ static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, /** * @brief Timer Output Compare 6 configuration * @param TIMx to select the TIM peripheral - * @param OC_Config The ouput configuration structure + * @param OC_Config The output configuration structure * @retval None */ static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, @@ -7102,7 +7243,7 @@ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - if(sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) { return HAL_ERROR; } @@ -7154,11 +7295,11 @@ static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, case TIM_TS_ITR1: case TIM_TS_ITR2: case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - break; - } + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } default: break; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c index 0ce23de8fb..82a0144337 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c @@ -112,6 +112,13 @@ (((__INSTANCE__) == TIM1) ? (TIM1_OR_ETR_ADC1_RMP | TIM1_OR_TI1_RMP) : \ ((__INSTANCE__) == TIM2) ? (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP | TIM2_OR_ITR1_RMP) : \ ((__INSTANCE__) == TIM16) ? TIM16_OR_TI1_RMP : TIM17_OR_TI1_RMP) +#elif defined(STM32WB10xx) +#define TIM_GET_OR_MASK(__INSTANCE__) \ + (((__INSTANCE__) == TIM1) ? (TIM1_OR_ETR_ADC1_RMP) : (TIM2_OR_ETR_RMP)) +#elif defined(STM32WB15xx) +#define TIM_GET_OR_MASK(__INSTANCE__) \ + (((__INSTANCE__) == TIM1) ? (TIM1_OR_ETR_ADC1_RMP | TIM1_OR_TI1_RMP) : \ + (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP)) #else #define TIM_GET_OR_MASK(__INSTANCE__) \ (((__INSTANCE__) == TIM1) ? (TIM1_OR_ETR_ADC1_RMP | TIM1_OR_TI1_RMP) : \ @@ -352,9 +359,9 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) /* Check the TIM channels state */ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -364,7 +371,7 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); - + /* Enable the Input Capture channel 1 (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); @@ -432,9 +439,9 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) /* Check the TIM channels state */ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) - || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } @@ -518,12 +525,12 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 /* Set the TIM channel state */ if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) - ||(complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) { return HAL_BUSY; } else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) - && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) { if ((pData == NULL) && (Length > 0U)) { @@ -553,6 +560,7 @@ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32 /* Enable the DMA channel for Capture 1*/ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the capture compare 1 Interrupt */ @@ -654,7 +662,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) { return HAL_ERROR; } - + /* Set the TIM complementary channel state */ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); @@ -918,6 +926,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -937,6 +946,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -956,6 +966,7 @@ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Output Compare DMA request */ @@ -1372,6 +1383,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 1 DMA request */ @@ -1391,6 +1403,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 2 DMA request */ @@ -1410,6 +1423,7 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Cha /* Enable the DMA channel */ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK) { + /* Return error status */ return HAL_ERROR; } /* Enable the TIM Capture/Compare 3 DMA request */ @@ -1532,8 +1546,10 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan /** * @brief Starts the TIM One Pulse signal generation on the complementary * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled + * @param OutputChannel pulse output channel to enable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1542,22 +1558,28 @@ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Chan HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); - HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); /* Check the TIM channels state */ - if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } /* Set the TIM channels state */ - TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); /* Enable the complementary One Pulse output channel and the Input Capture channel */ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); @@ -1573,8 +1595,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t Ou /** * @brief Stops the TIM One Pulse signal generation on the complementary * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled + * @param OutputChannel pulse output channel to disable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1598,8 +1622,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out __HAL_TIM_DISABLE(htim); /* Set the TIM channels state */ - TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ return HAL_OK; @@ -1608,8 +1634,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out /** * @brief Starts the TIM One Pulse signal generation in interrupt mode on the * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be enabled + * @param OutputChannel pulse output channel to enable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1618,22 +1646,28 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t Out HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) { uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; - HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel); - HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel); + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); /* Check the TIM channels state */ - if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY) - || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) { return HAL_ERROR; } /* Set the TIM channels state */ - TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY); - TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); /* Enable the TIM Capture/Compare 1 interrupt */ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); @@ -1655,8 +1689,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t /** * @brief Stops the TIM One Pulse signal generation in interrupt mode on the * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). * @param htim TIM One Pulse handle - * @param OutputChannel TIM Channel to be disabled + * @param OutputChannel pulse output channel to disable * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1686,8 +1722,10 @@ HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t __HAL_TIM_DISABLE(htim); /* Set the TIM channels state */ - TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY); - TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); /* Return function status */ return HAL_OK; @@ -2378,15 +2416,17 @@ HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t Br /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); - do + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) { - if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != TIM_BDTR_BKDSRM) + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) { - return HAL_OK; + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } } - } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); - - return HAL_TIMEOUT; + } } break; } @@ -2399,15 +2439,17 @@ HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t Br /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); - do + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) { - if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != TIM_BDTR_BK2DSRM) + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) { - return HAL_OK; + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } } - } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT); - - return HAL_TIMEOUT; + } } break; } @@ -2538,12 +2580,12 @@ HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN) { HAL_TIM_ChannelStateTypeDef channel_state; - + /* Check the parameters */ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); - + return channel_state; } /** @@ -2610,7 +2652,7 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) if (hdma == htim->hdma[TIM_DMA_ID_CC1]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); @@ -2619,7 +2661,7 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); @@ -2628,7 +2670,7 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); @@ -2637,7 +2679,7 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) { htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - + if (hdma->Init.Mode == DMA_NORMAL) { TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); @@ -2662,7 +2704,7 @@ static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) * @param hdma pointer to DMA handle. * @retval None */ -void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) { TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; @@ -2685,13 +2727,13 @@ void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) { /* nothing to do */ } - + #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) htim->ErrorCallback(htim); #else HAL_TIM_ErrorCallback(htim); #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ - + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c index 9abed26219..38463fd31a 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tsc.c @@ -254,6 +254,7 @@ HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef *htsc) assert_param(IS_TSC_SSD(htsc->Init.SpreadSpectrumDeviation)); assert_param(IS_TSC_SS_PRESC(htsc->Init.SpreadSpectrumPrescaler)); assert_param(IS_TSC_PG_PRESC(htsc->Init.PulseGeneratorPrescaler)); + assert_param(IS_TSC_PG_PRESC_VS_CTPL(htsc->Init.PulseGeneratorPrescaler, htsc->Init.CTPulseLowLength)); assert_param(IS_TSC_MCV(htsc->Init.MaxCountValue)); assert_param(IS_TSC_IODEF(htsc->Init.IODefaultMode)); assert_param(IS_TSC_SYNC_POL(htsc->Init.SynchroPinPolarity)); @@ -427,7 +428,8 @@ __weak void HAL_TSC_MspDeInit(TSC_HandleTypeDef *htsc) * @param pCallback pointer to the Callback function * @retval HAL status */ -HAL_StatusTypeDef HAL_TSC_RegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID, pTSC_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_TSC_RegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID, + pTSC_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c index daa7a0ef2b..3b16b3c671 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c @@ -39,7 +39,8 @@ (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. (+++) Configure the DMA Tx/Rx channel. (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. @@ -114,6 +115,10 @@ (+) MspDeInitCallback : UART MspDeInit. [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback(). + + [..] By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET all callbacks are set to the corresponding weak (surcharged) functions: examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback(). @@ -655,6 +660,7 @@ HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_RESET; huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; __HAL_UNLOCK(huart); @@ -854,55 +860,57 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR switch (CallbackID) { case HAL_UART_TX_HALFCOMPLETE_CB_ID : - huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ break; case HAL_UART_TX_COMPLETE_CB_ID : - huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ break; case HAL_UART_RX_HALFCOMPLETE_CB_ID : - huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ break; case HAL_UART_RX_COMPLETE_CB_ID : - huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ break; case HAL_UART_ERROR_CB_ID : - huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ break; case HAL_UART_ABORT_COMPLETE_CB_ID : - huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ break; case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : - huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ break; case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : - huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ break; case HAL_UART_WAKEUP_CB_ID : - huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ break; case HAL_UART_RX_FIFO_FULL_CB_ID : - huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ break; case HAL_UART_TX_FIFO_EMPTY_CB_ID : - huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ break; case HAL_UART_MSPINIT_CB_ID : - huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ break; case HAL_UART_MSPDEINIT_CB_ID : - huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ break; default : @@ -942,6 +950,74 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR return status; } + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(huart); + + if (huart->gState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(huart); + return status; +} + #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ /** @@ -1007,16 +1083,22 @@ HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UAR (+) HAL_UART_AbortTransmitCpltCallback() (+) HAL_UART_AbortReceiveCpltCallback() + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services: + (+) HAL_UARTEx_RxEventCallback() + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. Errors are handled as follows : (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is - to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception . - Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type, - and HAL_UART_ErrorCallback() user callback is executed. Transfer is kept ongoing on UART side. + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. If user wants to abort it, Abort services should be called by user. (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. - Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. -@- In the Half duplex communication, it is forbidden to run the transmit and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. @@ -1059,7 +1141,7 @@ HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, u huart->ErrorCode = HAL_UART_ERROR_NONE; huart->gState = HAL_UART_STATE_BUSY_TX; - /* Init tickstart for timeout managment*/ + /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); huart->TxXferSize = Size; @@ -1148,8 +1230,9 @@ HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, ui huart->ErrorCode = HAL_UART_ERROR_NONE; huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - /* Init tickstart for timeout managment*/ + /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); huart->RxXferSize = Size; @@ -1300,58 +1383,29 @@ HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, __HAL_LOCK(huart); - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - huart->RxXferCount = Size; - huart->RxISR = NULL; - - /* Computation of UART mask to apply to RDR register */ - UART_MASK_COMPUTATION(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - /* Configure Rx interrupt processing*/ - if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) +#if defined(LPUART1) + if (!(IS_LPUART_INSTANCE(huart->Instance))) { - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) { - huart->RxISR = UART_RxISR_16BIT_FIFOEN; + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); } - else - { - huart->RxISR = UART_RxISR_8BIT_FIFOEN; - } - - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); } - else +#else + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) { - /* Set the Rx ISR function pointer according to the data word length */ - if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) - { - huart->RxISR = UART_RxISR_16BIT; - } - else - { - huart->RxISR = UART_RxISR_8BIT; - } - - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); } +#endif - return HAL_OK; + return(UART_Start_Receive_IT(huart, pData, Size)); } else { @@ -1457,53 +1511,29 @@ HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData __HAL_LOCK(huart); - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->RxState = HAL_UART_STATE_BUSY_RX; + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; - if (huart->hdmarx != NULL) +#if defined(LPUART1) + if (!(IS_LPUART_INSTANCE(huart->Instance))) { - /* Set the UART DMA transfer complete callback */ - huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmarx->XferErrorCallback = UART_DMAError; - - /* Set the DMA abort callback */ - huart->hdmarx->XferAbortCallback = NULL; - - /* Enable the DMA channel */ - if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) { - /* Set error code to DMA */ - huart->ErrorCode = HAL_UART_ERROR_DMA; - - __HAL_UNLOCK(huart); - - /* Restore huart->gState to ready */ - huart->gState = HAL_UART_STATE_READY; - - return HAL_ERROR; + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); } } - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error Interrupt */ - SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - SET_BIT(huart->Instance->CR3, USART_CR3_EIE); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); +#else + /* Check that USART RTOEN bit is set */ + if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } +#endif - return HAL_OK; + return(UART_Start_Receive_DMA(huart, pData, Size)); } else { @@ -1564,7 +1594,7 @@ HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) /* Clear the Overrun flag before resuming the Rx transfer */ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); - /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */ + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); SET_BIT(huart->Instance->CR3, USART_CR3_EIE); @@ -1660,9 +1690,16 @@ HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) { /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + /* Disable the UART DMA Tx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) { @@ -1732,6 +1769,7 @@ HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; huart->ErrorCode = HAL_UART_ERROR_NONE; @@ -1814,6 +1852,12 @@ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { @@ -1850,6 +1894,7 @@ HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; return HAL_OK; } @@ -1873,9 +1918,16 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) uint32_t abortcplt = 1U; /* Disable interrupts */ - CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised before any call to DMA Abort functions */ /* DMA Tx Handle is valid */ @@ -1984,6 +2036,7 @@ HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* As no DMA to be aborted, call directly user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -2108,6 +2161,12 @@ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + /* Disable the UART DMA Rx request if enabled */ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) { @@ -2143,6 +2202,7 @@ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* As no DMA to be aborted, call directly user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -2167,6 +2227,7 @@ HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* As no DMA to be aborted, call directly user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -2349,6 +2410,93 @@ void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) } /* End if some error occurs */ + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + &&((isrflags & USART_ISR_IDLE) != 0U) + &&((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ( (nb_remaining_rx_data > 0U) + &&(nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ( (huart->RxXferCount > 0U) + &&(nb_rx_data > 0U) ) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif + } + return; + } + } + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) { @@ -2534,6 +2682,24 @@ __weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) } /** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** * @} */ @@ -2572,11 +2738,16 @@ __weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) */ void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) { +#if defined(LPUART1) if (!(IS_LPUART_INSTANCE(huart->Instance))) { assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); } +#else + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); +#endif /* LPUART1 */ } /** @@ -2587,6 +2758,7 @@ void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t Timeout */ HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) { +#if defined(LPUART1) if (!(IS_LPUART_INSTANCE(huart->Instance))) { if (huart->gState == HAL_UART_STATE_READY) @@ -2615,6 +2787,29 @@ HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) { return HAL_ERROR; } +#else + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +#endif /* LPUART1 */ } /** @@ -2625,6 +2820,7 @@ HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) */ HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) { +#if defined(LPUART1) if (!(IS_LPUART_INSTANCE(huart->Instance))) { if (huart->gState == HAL_UART_STATE_READY) @@ -2653,6 +2849,29 @@ HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) { return HAL_ERROR; } +#else + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +#endif /* LPUART1 */ } /** @@ -2855,6 +3074,7 @@ void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ } #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ @@ -2908,7 +3128,6 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) * set TE and RE bits according to huart->Init.Mode value * set OVER8 bit according to huart->Init.OverSampling value */ tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; - tmpreg |= (uint32_t)huart->FifoMode; MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); /*-------------------------- USART CR2 Configuration -----------------------*/ @@ -2981,9 +3200,9 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) } else { - /* Check computed UsartDiv value is in allocated range + /* Check computed UsartDiv value is in allocated range (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ - usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, (uint64_t)huart->Init.BaudRate, huart->Init.ClockPrescaler)); + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) { huart->Instance->BRR = usartdiv; @@ -2992,7 +3211,8 @@ HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) { ret = HAL_ERROR; } - } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ } /* if (pclk != 0) */ } /* Check UART Over Sampling to set Baud Rate Register */ @@ -3171,7 +3391,7 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) /* Initialize the UART ErrorCode */ huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Init tickstart for timeout managment*/ + /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); /* Check if the Transmitter is enabled */ @@ -3199,6 +3419,7 @@ HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) /* Initialize the UART State */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; __HAL_UNLOCK(huart); @@ -3225,7 +3446,8 @@ HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_ { if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); @@ -3243,18 +3465,19 @@ HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_ { /* Clear Receiver Timeout flag*/ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); - - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ + + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; huart->ErrorCode = HAL_UART_ERROR_RTO; - + /* Process Unlocked */ __HAL_UNLOCK(huart); - + return HAL_TIMEOUT; } } @@ -3263,6 +3486,134 @@ HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_ return HAL_OK; } +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + __HAL_UNLOCK(huart); + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + __HAL_UNLOCK(huart); + + /* Enable the UART Parity Error Interrupt */ + SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + /** * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). @@ -3291,8 +3642,15 @@ static void UART_EndRxTransfer(UART_HandleTypeDef *huart) CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* Reset RxIsr function pointer */ huart->RxISR = NULL; @@ -3375,15 +3733,37 @@ static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) /* At end of Rx process, restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } } + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } } /** @@ -3395,13 +3775,29 @@ static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) { UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx Half complete callback*/ - huart->RxHalfCpltCallback(huart); + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize/2U); #else - /*Call legacy weak Rx Half complete callback*/ - HAL_UART_RxHalfCpltCallback(huart); + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } } /** @@ -3506,6 +3902,7 @@ static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* Call user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -3557,6 +3954,7 @@ static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) /* Restore huart->gState and huart->RxState to Ready */ huart->gState = HAL_UART_STATE_READY; huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* Call user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -3624,6 +4022,7 @@ static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) /* Restore huart->RxState to Ready */ huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; /* Call user Abort complete callback */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) @@ -3636,7 +4035,7 @@ static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) } /** - * @brief TX interrrupt handler for 7 or 8 bits data word length . + * @brief TX interrupt handler for 7 or 8 bits data word length . * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Transmit_IT(). * @param huart UART handle. @@ -3665,7 +4064,7 @@ static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) } /** - * @brief TX interrrupt handler for 9 bits data word length. + * @brief TX interrupt handler for 9 bits data word length. * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Transmit_IT(). * @param huart UART handle. @@ -3697,7 +4096,7 @@ static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) } /** - * @brief TX interrrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Transmit_IT(). * @param huart UART handle. @@ -3737,7 +4136,7 @@ static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) } /** - * @brief TX interrrupt handler for 9 bits data word length and FIFO mode is enabled. + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Transmit_IT(). * @param huart UART handle. @@ -3805,7 +4204,7 @@ static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) } /** - * @brief RX interrrupt handler for 7 or 8 bits data word length . + * @brief RX interrupt handler for 7 or 8 bits data word length . * @param huart UART handle. * @retval None */ @@ -3836,13 +4235,33 @@ static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; } } else @@ -3853,7 +4272,7 @@ static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) } /** - * @brief RX interrrupt handler for 9 bits data word length . + * @brief RX interrupt handler for 9 bits data word length . * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Receive_IT() * @param huart UART handle. @@ -3888,13 +4307,33 @@ static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; } } else @@ -3905,7 +4344,7 @@ static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) } /** - * @brief RX interrrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Receive_IT() * @param huart UART handle. @@ -3915,25 +4354,74 @@ static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) { uint16_t uhMask = huart->Mask; uint16_t uhdata; - uint16_t nb_rx_data; + uint16_t nb_rx_data; uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); /* Check that a Rx process is ongoing */ if (huart->RxState == HAL_UART_STATE_BUSY_RX) { - for (nb_rx_data = huart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) { uhdata = (uint16_t) READ_REG(huart->Instance->RDR); *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); huart->pRxBuffPtr++; huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } if (huart->RxXferCount == 0U) { /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); /* Rx process is completed, restore huart->RxState to Ready */ @@ -3942,13 +4430,33 @@ static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; } } @@ -3977,7 +4485,7 @@ static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) } /** - * @brief RX interrrupt handler for 9 bits data word length and FIFO mode is enabled. + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. * @note Function is called under interruption only, once * interruptions have been enabled by HAL_UART_Receive_IT() * @param huart UART handle. @@ -3988,26 +4496,75 @@ static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) uint16_t *tmp; uint16_t uhMask = huart->Mask; uint16_t uhdata; - uint16_t nb_rx_data; + uint16_t nb_rx_data; uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); /* Check that a Rx process is ongoing */ if (huart->RxState == HAL_UART_STATE_BUSY_RX) { - for (nb_rx_data = huart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) { uhdata = (uint16_t) READ_REG(huart->Instance->RDR); tmp = (uint16_t *) huart->pRxBuffPtr ; *tmp = (uint16_t)(uhdata & uhMask); huart->pRxBuffPtr += 2U; huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } if (huart->RxXferCount == 0U) { /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); /* Rx process is completed, restore huart->RxState to Ready */ @@ -4016,13 +4573,33 @@ static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) /* Clear RxISR function pointer */ huart->RxISR = NULL; + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Disable IDLE interrupt */ + CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) - /*Call registered Rx complete callback*/ - huart->RxCpltCallback(huart); + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); #else - /*Call legacy weak Rx complete callback*/ - HAL_UART_RxCpltCallback(huart); + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; } } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c index 1ab7a1209f..5ce3f8e277 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c @@ -332,6 +332,41 @@ __weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + @endverbatim * @{ */ @@ -416,7 +451,7 @@ HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huar /* Enable the Peripheral */ __HAL_UART_ENABLE(huart); - /* Init tickstart for timeout managment*/ + /* Init tickstart for timeout management */ tickstart = HAL_GetTick(); /* Wait until REACK flag is set */ @@ -653,6 +688,269 @@ HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint3 } /** + * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note Dual core specific: there is no support for unaligned accesses on the Cortex-M0+ processor. + * When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + __HAL_UNLOCK(huart); + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note Dual core specific: there is no support for unaligned accesses on the Cortex-M0+ processor. + * When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_IT(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note Dual core specific: there is no support for unaligned accesses on the Cortex-M0+ processor. + * When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits) + * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + __HAL_LOCK(huart); + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** * @} */ @@ -694,8 +992,8 @@ static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) uint8_t tx_fifo_depth; uint8_t rx_fifo_threshold; uint8_t tx_fifo_threshold; - uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; - uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; if (huart->FifoMode == UART_FIFOMODE_DISABLE) { @@ -708,8 +1006,10 @@ static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) tx_fifo_depth = TX_FIFO_DEPTH; rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); - huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold]; - huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold]; + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; } } /** diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c index e6c7363dad..9b0ded6d71 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart.c @@ -49,7 +49,7 @@ by calling the customized HAL_USART_MspInit(&husart) API. [..] - (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to USART API's HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. @@ -529,9 +529,9 @@ HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_US } /** - * @brief Unregister an UART Callback - * UART callaback is redirected to the weak predefined callback - * @param husart uart handle + * @brief Unregister an USART Callback + * USART callaback is redirected to the weak predefined callback + * @param husart usart handle * @param CallbackID ID of the callback to be unregistered * This parameter can be one of the following values: * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID @@ -732,7 +732,7 @@ HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_ /** * @brief Simplex send an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data is handled as a set of u16. In this case, Size must indicate the number * of u16 provided through pTxData. * @param husart USART handle. @@ -830,7 +830,7 @@ HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxDa /** * @brief Receive an amount of data in blocking mode. * @note To receive synchronous data, dummy data are simultaneously transmitted. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the received data is handled as a set of u16. In this case, Size must indicate the number * of u16 available through pRxData. * @param husart USART handle. @@ -942,7 +942,7 @@ HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxDat /** * @brief Full-Duplex Send and Receive an amount of data in blocking mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number * of u16 available through pTxData and through pRxData. * @param husart USART handle. @@ -1091,7 +1091,7 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t /** * @brief Send an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data is handled as a set of u16. In this case, Size must indicate the number * of u16 provided through pTxData. * @param husart USART handle. @@ -1175,7 +1175,7 @@ HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pT /** * @brief Receive an amount of data in interrupt mode. * @note To receive synchronous data, dummy data are simultaneously transmitted. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the received data is handled as a set of u16. In this case, Size must indicate the number * of u16 available through pRxData. * @param husart USART handle. @@ -1279,7 +1279,7 @@ HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRx /** * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number * of u16 available through pTxData and through pRxData. * @param husart USART handle. @@ -1377,7 +1377,7 @@ HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint /** * @brief Send an amount of data in DMA mode. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data is handled as a set of u16. In this case, Size must indicate the number * of u16 provided through pTxData. * @param husart USART handle. @@ -1463,7 +1463,7 @@ HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *p * @note When the USART parity is enabled (PCE = 1), the received data contain * the parity bit (MSB position). * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the received data is handled as a set of u16. In this case, Size must indicate the number * of u16 available through pRxData. * @param husart USART handle. @@ -1580,7 +1580,7 @@ HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pR /** * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. - * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number * of u16 available through pTxData and through pRxData. * @param husart USART handle. diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c index 62186773f2..56e52b08aa 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_usart_ex.c @@ -57,10 +57,10 @@ /** @defgroup USARTEx_Private_Constants USARTEx Private Constants * @{ */ -/* UART RX FIFO depth */ +/* USART RX FIFO depth */ #define RX_FIFO_DEPTH 8U -/* UART TX FIFO depth */ +/* USART TX FIFO depth */ #define TX_FIFO_DEPTH 8U /** * @} @@ -503,8 +503,8 @@ static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart) uint8_t rx_fifo_threshold; uint8_t tx_fifo_threshold; /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ - uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; - uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; if (husart->FifoMode == USART_FIFOMODE_DISABLE) { diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c index e70227cb96..0c0a470130 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_wwdg.c @@ -21,6 +21,13 @@ before the counter has reached the refresh window value. This implies that the counter must be refreshed in a limited window. (+) Once enabled the WWDG cannot be disabled except by a system reset. + (+) If required by application, an Early Wakeup Interrupt can be triggered + in order to be warned before WWDG expiration. The Early Wakeup Interrupt + (EWI) can be used if specific safety operations or data logging must + be performed before the actual reset is generated. When the downcounter + reaches 0x40, interrupt occurs. This mechanism requires WWDG interrupt + line to be enabled in NVIC. Once enabled, EWI interrupt cannot be + disabled except by a system reset. (+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG reset occurs. (+) The WWDG counter input clock is derived from the APB clock divided @@ -34,7 +41,8 @@ (+) Typical values: (++) Counter min (T[5;0] = 0x00) at 64 MHz (PCLK1) with zero prescaler: max timeout before reset: approximately 64us - (++) Counter max (T[5;0] = 0x3F) at 64 MHz (PCLK1) with prescaler dividing by 128: + (++) Counter max (T[5;0] = 0x3F) at 64 MHz (PCLK1) with prescaler + dividing by 128: max timeout before reset: approximately 524.28ms ##### How to use this driver ##### @@ -45,16 +53,16 @@ [..] (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE(). - (+) Set the WWDG prescaler, refresh window and counter value - using HAL_WWDG_Init() function. - (+) Start the WWDG using HAL_WWDG_Start() function. - When the WWDG is enabled the counter value should be configured to - a value greater than 0x40 to prevent generating an immediate reset. - (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is - generated when the counter reaches 0x40, and then start the WWDG using - HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can - add his own code by customization of callback HAL_WWDG_WakeupCallback. - Once enabled, EWI interrupt cannot be disabled except by a system reset. + (+) Configure the WWDG prescaler, refresh window value, counter value and early + interrupt status using HAL_WWDG_Init() function. This will automatically + enable WWDG and start its downcounter. Time reference can be taken from + function exit. Care must be taken to provide a counter value + greater than 0x40 to prevent generation of immediate reset. + (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is + generated when the counter reaches 0x40. When HAL_WWDG_IRQHandler is + triggered by the interrupt service routine, flag will be automatically + cleared and HAL_WWDG_WakeupCallback user callback will be executed. User + can add his own code by customization of callback HAL_WWDG_WakeupCallback. (+) Then the application program must refresh the WWDG counter at regular intervals during normal operation to prevent an MCU reset, using HAL_WWDG_Refresh() function. This operation must occur only when @@ -64,7 +72,7 @@ ============================= [..] - The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows + The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. Use Functions HAL_WWDG_RegisterCallback() to register a user callback. @@ -96,7 +104,7 @@ *** WWDG HAL driver macros list *** =================================== [..] - Below the list of most used macros in WWDG HAL driver. + Below the list of available macros in WWDG HAL driver. (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags @@ -197,7 +205,7 @@ HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg) #else /* Init the low level hardware */ HAL_WWDG_MspInit(hwwdg); -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ /* Set WWDG Counter */ WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter)); @@ -242,7 +250,8 @@ __weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg) * @param pCallback pointer to the Callback function * @retval status */ -HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback) +HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, + pWWDG_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; @@ -303,7 +312,7 @@ HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWD return status; } -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ /** * @} @@ -371,7 +380,7 @@ void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg) #else /* Early Wakeup callback */ HAL_WWDG_EarlyWakeupCallback(hwwdg); -#endif +#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */ } } } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c index 2aa46eef4f..a543fcd60f 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c @@ -67,6 +67,12 @@ #define ADC_CLOCK_RATIO_VS_CPU_HIGHEST (512UL * 16UL * 4UL) #define ADC_TIMEOUT_DISABLE_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) #define ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 1UL) +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Note: CCRDY handshake requires 1APB + 2 ADC + 3 APB cycles */ +/* after the channel configuration has been changed. */ +/* Driver timeout is approximated to 6 CPU cycles. */ +#define ADC_TIMEOUT_CCRDY_CPU_CYCLES (ADC_CLOCK_RATIO_VS_CPU_HIGHEST * 6UL) +#endif /** * @} @@ -80,6 +86,22 @@ /* Check of parameters for configuration of ADC hierarchical scope: */ /* common to several ADC instances. */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ + ( ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV6) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV8) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV10) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV12) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV16) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV32) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV64) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ + ) +#else #define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ ( ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ @@ -97,9 +119,19 @@ || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV128) \ || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC_DIV256) \ ) +#endif /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC instance. */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_CLOCK(__CLOCK__) \ + ( ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ + || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV1) \ + || ((__CLOCK__) == LL_ADC_CLOCK_ASYNC) \ + ) + +#endif #define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ ( ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ @@ -112,13 +144,32 @@ || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ ) +#if defined (ADC_SUPPORT_2_5_MSPS) #define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ ( ((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOPOWEROFF) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF) \ ) - +#else +#define IS_LL_ADC_LOW_POWER(__LOW_POWER__) \ + ( ((__LOW_POWER__) == LL_ADC_LP_MODE_NONE) \ + || ((__LOW_POWER__) == LL_ADC_LP_AUTOWAIT) \ + ) +#endif /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group regular */ +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ + ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO2) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH4 ) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH4) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ + || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ + ) +#else #define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_TRGO) \ @@ -130,6 +181,7 @@ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ ) +#endif #define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ ( ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ @@ -147,6 +199,25 @@ || ((__REG_OVR_DATA_BEHAVIOR__) == LL_ADC_REG_OVR_DATA_OVERWRITTEN) \ ) +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_REG_SEQ_MODE(__REG_SEQ_MODE__) \ + ( ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_FIXED) \ + || ((__REG_SEQ_MODE__) == LL_ADC_REG_SEQ_CONFIGURABLE) \ + ) +#endif + +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ + ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ + || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ + ) +#else #define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ @@ -165,7 +236,13 @@ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS) \ || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS) \ ) - +#endif +#if defined (ADC_SUPPORT_2_5_MSPS) +#define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ + ( ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ + || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ + ) +#else #define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ ( ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ @@ -177,7 +254,7 @@ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS) \ || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS) \ ) - +#endif /* Check of parameters for configuration of ADC hierarchical scope: */ /* ADC group injected */ #define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ @@ -245,11 +322,19 @@ ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) /* Check the parameters */ assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Force reset of ADC clock (core clock) */ + LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); + + /* Release reset of ADC clock (core clock) */ + LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); +#else /* Force reset of ADC clock (core clock) */ LL_AHB2_GRP1_ForceReset(LL_AHB2_GRP1_PERIPH_ADC); /* Release reset of ADC clock (core clock) */ LL_AHB2_GRP1_ReleaseReset(LL_AHB2_GRP1_PERIPH_ADC); +#endif /* ADC_SUPPORT_2_5_MSPS */ return SUCCESS; } @@ -342,7 +427,11 @@ void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) /* Set ADC_CommonInitStruct fields to default values */ /* Set fields of ADC common */ /* (all ADC instances belonging to the same ADC common instance) */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2; +#else ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; +#endif /* ADC_SUPPORT_2_5_MSPS */ } @@ -387,6 +476,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) } } +#if !defined (ADC_SUPPORT_2_5_MSPS) /* Set ADC group injected trigger source to SW start to ensure to not */ /* have an external trigger event occurring during the conversion stop */ /* ADC disable process. */ @@ -414,12 +504,28 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) break; } } +#else + /* Wait for ADC conversions are effectively stopped */ + timeout_cpu_cycles = ADC_TIMEOUT_STOP_CONVERSION_CPU_CYCLES; + while (LL_ADC_REG_IsStopConversionOngoing(ADCx) == 1UL) + { + timeout_cpu_cycles--; + if(timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } +#endif /* ADC_SUPPORT_2_5_MSPS */ +#if !defined (ADC_SUPPORT_2_5_MSPS) /* Flush group injected contexts queue (register JSQR): */ /* Note: Bit JQM must be set to empty the contexts queue (otherwise */ /* contexts queue is maintained with the last active context). */ LL_ADC_INJ_SetQueueMode(ADCx, LL_ADC_INJ_QUEUE_2CONTEXTS_END_EMPTY); - + +#endif /* Disable the ADC instance */ LL_ADC_Disable(ADCx); @@ -438,11 +544,19 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) } /* Check whether ADC state is compliant with expected state */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (READ_BIT(ADCx->CR, + (ADC_CR_ADSTP | ADC_CR_ADSTART + | ADC_CR_ADDIS | ADC_CR_ADEN ) + ) + == 0UL) +#else if (READ_BIT(ADCx->CR, (ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) ) == 0UL) +#endif { /* ========== Reset ADC registers ========== */ /* Reset register IER */ @@ -452,12 +566,17 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) | LL_ADC_IT_EOS | LL_ADC_IT_OVR | LL_ADC_IT_EOSMP +#if !defined (ADC_SUPPORT_2_5_MSPS) | LL_ADC_IT_JEOC | LL_ADC_IT_JEOS | LL_ADC_IT_JQOVF +#endif | LL_ADC_IT_AWD1 | LL_ADC_IT_AWD2 | LL_ADC_IT_AWD3 +#if defined (ADC_SUPPORT_2_5_MSPS) + | LL_ADC_IT_CCRDY +#endif ) ); @@ -468,15 +587,26 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) | LL_ADC_FLAG_EOS | LL_ADC_FLAG_OVR | LL_ADC_FLAG_EOSMP +#if !defined (ADC_SUPPORT_2_5_MSPS) | LL_ADC_FLAG_JEOC | LL_ADC_FLAG_JEOS | LL_ADC_FLAG_JQOVF +#endif | LL_ADC_FLAG_AWD1 | LL_ADC_FLAG_AWD2 | LL_ADC_FLAG_AWD3 +#if defined (ADC_SUPPORT_2_5_MSPS) + | LL_ADC_FLAG_CCRDY +#endif ) ); +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset register CR */ + /* Bits ADC_CR_ADCAL, ADC_CR_ADSTP, ADC_CR_ADSTART are in access mode */ + /* "read-set": no direct reset applicable. */ + CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN); +#else /* Reset register CR */ /* - Bits ADC_CR_JADSTP, ADC_CR_ADSTP, ADC_CR_JADSTART, ADC_CR_ADSTART, */ /* ADC_CR_ADCAL, ADC_CR_ADDIS, ADC_CR_ADEN are in */ @@ -489,7 +619,66 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* already done above. */ CLEAR_BIT(ADCx->CR, ADC_CR_ADVREGEN | ADC_CR_ADCALDIF); SET_BIT(ADCx->CR, ADC_CR_DEEPPWD); +#endif +#if defined (ADC_SUPPORT_2_5_MSPS) + /* Reset register CFGR1 */ + CLEAR_BIT(ADCx->CFGR1, + ( ADC_CFGR1_AWD1CH | ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL | ADC_CFGR1_DISCEN + | ADC_CFGR1_AUTOFF | ADC_CFGR1_WAIT | ADC_CFGR1_CONT | ADC_CFGR1_OVRMOD + | ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL | ADC_CFGR1_ALIGN | ADC_CFGR1_RES + | ADC_CFGR1_SCANDIR | ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN ) + ); + + /* Reset register SMPR */ + CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); + + /* Reset register TR1 */ + MODIFY_REG(ADCx->TR1, ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + + /* Reset register CHSELR */ + CLEAR_BIT(ADCx->CHSELR, + ( ADC_CHSELR_CHSEL18 | ADC_CHSELR_CHSEL17 | ADC_CHSELR_CHSEL16 + | ADC_CHSELR_CHSEL15 | ADC_CHSELR_CHSEL14 | ADC_CHSELR_CHSEL13 | ADC_CHSELR_CHSEL12 + | ADC_CHSELR_CHSEL11 | ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL9 | ADC_CHSELR_CHSEL8 + | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL5 | ADC_CHSELR_CHSEL4 + | ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL2 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL0 ) + ); + + /* Wait for ADC channel configuration ready */ + timeout_cpu_cycles = ADC_TIMEOUT_CCRDY_CPU_CYCLES; + while (LL_ADC_IsActiveFlag_CCRDY(ADCx) == 0UL) + { + timeout_cpu_cycles--; + if(timeout_cpu_cycles == 0UL) + { + /* Time-out error */ + status = ERROR; + break; + } + } + + /* Clear flag ADC channel configuration ready */ + LL_ADC_ClearFlag_CCRDY(ADCx); + + /* Reset register DR */ + /* bits in access mode read only, no direct reset applicable */ + + /* Reset register CALFACT */ + CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT); + + /* Reset register CFGR2 */ + /* Note: Update of ADC clock mode is conditioned to ADC state disabled: */ + /* already done above. */ + /* Note: Register reset last due to selection of asynchronous clock, */ + /* ADC clock then depends of configuration clock source at system */ + /* level. */ + CLEAR_BIT(ADCx->CFGR2, + ( ADC_CFGR2_CKMODE + | ADC_CFGR2_LFTRIG ) + ); + +#else /* Reset register CFGR */ MODIFY_REG(ADCx->CFGR, (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN @@ -506,6 +695,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) (ADC_CFGR2_ROVSM | ADC_CFGR2_TROVS | ADC_CFGR2_OVSS | ADC_CFGR2_OVSR | ADC_CFGR2_JOVSE | ADC_CFGR2_ROVSE) ); + /* Reset register SMPR1 */ CLEAR_BIT(ADCx->SMPR1, @@ -585,6 +775,7 @@ ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) /* Reset register CALFACT */ CLEAR_BIT(ADCx->CALFACT, ADC_CALFACT_CALFACT_D | ADC_CALFACT_CALFACT_S); +#endif } else { @@ -640,6 +831,9 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); +#if defined (ADC_SUPPORT_2_5_MSPS) + assert_param(IS_LL_ADC_CLOCK(ADC_InitStruct->Clock)); +#endif assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode)); @@ -653,6 +847,24 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) /* - Set ADC data resolution */ /* - Set ADC conversion data alignment */ /* - Set ADC low power mode */ +#if defined (ADC_SUPPORT_2_5_MSPS) + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_RES + | ADC_CFGR1_ALIGN + | ADC_CFGR1_WAIT + | ADC_CFGR1_AUTOFF + , + ADC_InitStruct->Resolution + | ADC_InitStruct->DataAlignment + | ADC_InitStruct->LowPowerMode + ); + + MODIFY_REG(ADCx->CFGR2, + ADC_CFGR2_CKMODE + , + ADC_InitStruct->Clock + ); +#else MODIFY_REG(ADCx->CFGR, ADC_CFGR_RES | ADC_CFGR_ALIGN @@ -662,7 +874,7 @@ ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) | ADC_InitStruct->DataAlignment | ADC_InitStruct->LowPowerMode ); - +#endif } else { @@ -682,6 +894,9 @@ void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) { /* Set ADC_InitStruct fields to default values */ /* Set fields of ADC instance */ +#if defined (ADC_SUPPORT_2_5_MSPS) + ADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; +#endif ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; ADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE; @@ -706,6 +921,9 @@ void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) * and potentially with ADC in a different state than disabled, * refer to description of each function for setting * conditioned to ADC state. + * @note On devices STM32WB10xx, STM32WB15xx: Before using this function, + * ADC group regular sequencer must be configured: refer to function + * @ref LL_ADC_REG_SetSequencerConfigurable(). * @note After using this function, other features must be configured * using LL unitary functions. * The minimum configuration remaining to be done is: @@ -727,11 +945,34 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* Check the parameters */ assert_param(IS_ADC_ALL_INSTANCE(ADCx)); assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); +#if defined (ADC_SUPPORT_2_5_MSPS) + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); + } + if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); + } +#else assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); + + /* ADC group regular continuous mode and discontinuous mode */ + /* can not be enabled simultenaeously */ + assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) + || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); } +#endif assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun)); @@ -751,6 +992,52 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I /* - Set ADC group regular overrun behavior */ /* Note: On this STM32 serie, ADC trigger edge is set to value 0x0 by */ /* setting of trigger source to SW start. */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if( (LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED) + || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) + ) + { + /* Case of sequencer mode fixed + or sequencer length >= 2 ranks with sequencer mode fully configurable: + discontinuous mode configured */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | ADC_REG_InitStruct->SequencerDiscont + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } + else + { + /* Case of sequencer mode fully configurable + and sequencer length 1 rank (sequencer disabled): + discontinuous mode discarded (fixed to disable) */ + MODIFY_REG(ADCx->CFGR1, + ADC_CFGR1_EXTSEL + | ADC_CFGR1_EXTEN + | ADC_CFGR1_DISCEN + | ADC_CFGR1_CONT + | ADC_CFGR1_DMAEN + | ADC_CFGR1_DMACFG + | ADC_CFGR1_OVRMOD + , + ADC_REG_InitStruct->TriggerSource + | LL_ADC_REG_SEQ_DISCONT_DISABLE + | ADC_REG_InitStruct->ContinuousMode + | ADC_REG_InitStruct->DMATransfer + | ADC_REG_InitStruct->Overrun + ); + } +#else if (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) { MODIFY_REG(ADCx->CFGR, @@ -789,9 +1076,17 @@ ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_I | ADC_REG_InitStruct->Overrun ); } +#endif /* ADC_SUPPORT_2_5_MSPS */ /* Set ADC group regular sequencer length and scan direction */ +#if defined (ADC_SUPPORT_2_5_MSPS) + if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED) + { + LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); + } +#else LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); +#endif } else { @@ -821,6 +1116,9 @@ void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) ADC_REG_InitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN; } +#if defined (ADC_SUPPORT_2_5_MSPS) +/* Feature "ADC group injected" not available on ADC peripheral of this STM32WB device */ +#else /** * @brief Initialize some features of ADC group injected. * @note These parameters have an impact on ADC scope: ADC group injected. @@ -847,6 +1145,12 @@ void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) * Refer to function @ref LL_ADC_INJ_SetSequencerRanks(). * - Set ADC channel sampling time * Refer to function LL_ADC_SetChannelSamplingTime(); + * @note Caution if feature ADC group injected contexts queue is enabled + * (refer to with function @ref LL_ADC_INJ_SetQueueMode() ): + * using successively several times this function will appear as + * having no effect. + * To set several features of ADC group injected, use + * function @ref LL_ADC_INJ_ConfigQueueContext(). * @param ADCx ADC instance * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure * @retval An ErrorStatus enumeration value: @@ -934,6 +1238,7 @@ void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) ADC_INJ_InitStruct->TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT; } +#endif /** * @} */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c index f5c19675d1..7495e21827 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_comp.c @@ -55,7 +55,7 @@ || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \ ) -/* Note: On this STM32 serie, comparator input plus parameters are */ +/* Note: On this STM32 series, comparator input plus parameters are */ /* the same on all COMP instances. */ /* However, comparator instance kept as macro parameter for */ /* compatibility with other STM32 families. */ @@ -72,7 +72,7 @@ ) #endif -/* Note: On this STM32 serie, comparator input minus parameters are */ +/* Note: On this STM32 series, comparator input minus parameters are */ /* the same on all COMP instances. */ /* However, comparator instance kept as macro parameter for */ /* compatibility with other STM32 families. */ diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c index bc305e6d1c..9560ad99ca 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c @@ -48,22 +48,22 @@ * @{ */ #define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \ - || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL)) + || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL)) #define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \ - || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128)) + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128)) #define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \ - || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE)) + || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE)) #define IS_LL_LPTIM_OUTPUT_POLARITY(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_REGULAR) \ - || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE)) + || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE)) /** * @} */ @@ -263,8 +263,7 @@ void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) do { rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ - } - while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); + } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); LL_LPTIM_ClearFlag_CMPOK(LPTIMx); } diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c index 6f44fd280b..8e507ab756 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c @@ -153,8 +153,10 @@ ErrorStatus LL_LPUART_DeInit(USART_TypeDef *LPUARTx) /** * @brief Initialize LPUART registers according to the specified * parameters in LPUART_InitStruct. - * @note As some bits in LPUART configuration registers can only be written when the LPUART is disabled (USART_CR1_UE bit =0), - * LPUART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @note As some bits in LPUART configuration registers can only be written when + * the LPUART is disabled (USART_CR1_UE bit =0), + * LPUART Peripheral should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. * @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0). * @param LPUARTx LPUART Instance * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure @@ -200,7 +202,8 @@ ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, LL_LPUART_InitTypeDef *LPUART /*---------------------------- LPUART CR3 Configuration ----------------------- * Configure LPUARTx CR3 (Hardware Flow Control) with parameters: - * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to LPUART_InitStruct->HardwareFlowControl value. + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according + * to LPUART_InitStruct->HardwareFlowControl value. */ LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl); diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c index d03933801c..b275ced7da 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_pwr.c @@ -109,10 +109,12 @@ ErrorStatus LL_PWR_DeInit(void) /* Clear all flags */ LL_PWR_WriteReg(SCR, LL_PWR_SCR_CC2HF - | LL_PWR_SCR_C802AF | LL_PWR_SCR_CBLEAF | LL_PWR_SCR_CCRPEF +#if defined(PWR_CR3_E802A) + | LL_PWR_SCR_C802AF | LL_PWR_SCR_C802WUF +#endif | LL_PWR_SCR_CBLEWUF #if defined(PWR_CR5_SMPSEN) | LL_PWR_SCR_CBORHF diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c index 23aa838de0..afcaa94303 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c @@ -72,9 +72,6 @@ #define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE)) -#if defined(SPI_I2S_SUPPORT) -#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2S_CLKSOURCE) -#endif /** * @} */ @@ -83,34 +80,31 @@ /** @defgroup RCC_LL_Private_Functions RCC Private functions * @{ */ -uint32_t RCC_PLL_GetFreqDomain_SYS(void); +static uint32_t RCC_PLL_GetFreqDomain_SYS(void); #if defined(SAI1) -uint32_t RCC_PLL_GetFreqDomain_SAI(void); +static uint32_t RCC_PLL_GetFreqDomain_SAI(void); #endif -uint32_t RCC_PLL_GetFreqDomain_ADC(void); -uint32_t RCC_PLL_GetFreqDomain_48M(void); +static uint32_t RCC_PLL_GetFreqDomain_ADC(void); +static uint32_t RCC_PLL_GetFreqDomain_48M(void); #if defined(SAI1) -uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void); -uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void); -uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void); +static uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void); +static uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void); +static uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void); #endif -#if defined(SPI_I2S_SUPPORT) -uint32_t RCC_PLL_GetFreqDomain_I2S(void); -#endif -uint32_t RCC_GetSystemClockFreq(void); +static uint32_t RCC_GetSystemClockFreq(void); -uint32_t RCC_GetHCLK1ClockFreq(uint32_t SYSCLK_Frequency); -uint32_t RCC_GetHCLK2ClockFreq(uint32_t SYSCLK_Frequency); -uint32_t RCC_GetHCLK4ClockFreq(uint32_t SYSCLK_Frequency); -uint32_t RCC_GetHCLK5ClockFreq(void); +static uint32_t RCC_GetHCLK1ClockFreq(uint32_t SYSCLK_Frequency); +static uint32_t RCC_GetHCLK2ClockFreq(uint32_t SYSCLK_Frequency); +static uint32_t RCC_GetHCLK4ClockFreq(uint32_t SYSCLK_Frequency); +static uint32_t RCC_GetHCLK5ClockFreq(void); -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); -uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency); +static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency); /** * @} */ @@ -190,13 +184,17 @@ ErrorStatus LL_RCC_DeInit(void) LL_RCC_WriteReg(CIER, 0x00000000U); /* Clear all interrupt flags */ -#if defined(SAI1) - vl_mask = RCC_CICR_LSI1RDYC | RCC_CICR_LSERDYC | RCC_CICR_MSIRDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | RCC_CICR_PLLRDYC | RCC_CICR_PLLSAI1RDYC | \ - RCC_CICR_CSSC | RCC_CICR_HSI48RDYC | RCC_CICR_LSECSSC | RCC_CICR_LSI2RDYC; -#else vl_mask = RCC_CICR_LSI1RDYC | RCC_CICR_LSERDYC | RCC_CICR_MSIRDYC | RCC_CICR_HSIRDYC | RCC_CICR_HSERDYC | RCC_CICR_PLLRDYC | \ - RCC_CICR_CSSC | RCC_CICR_HSI48RDYC | RCC_CICR_LSECSSC | RCC_CICR_LSI2RDYC; + RCC_CICR_CSSC | RCC_CICR_LSECSSC | RCC_CICR_LSI2RDYC; + +#if defined(SAI1) + vl_mask |= RCC_CICR_PLLSAI1RDYC; #endif + +#if defined(RCC_HSI48_SUPPORT) + vl_mask |= RCC_CICR_HSI48RDYC; +#endif + LL_RCC_WriteReg(CICR, vl_mask); /* Clear reset flags */ @@ -210,8 +208,10 @@ ErrorStatus LL_RCC_DeInit(void) /* RF Wakeup Clock Source selection */ LL_RCC_SetRFWKPClockSource(LL_RCC_RFWKP_CLKSOURCE_NONE); +#if defined(RCC_HSI48_SUPPORT) /* HSI48 reset */ LL_RCC_HSI48_Disable(); +#endif /* HSECR register write unlock & then reset*/ LL_RCC_WriteReg(HSECR, HSE_CONTROL_UNLOCK_KEY); @@ -407,7 +407,8 @@ uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource) * @brief Return I2Cx clock frequency * @param I2CxSource This parameter can be one of the following values: * @arg @ref LL_RCC_I2C1_CLKSOURCE - * @arg @ref LL_RCC_I2C3_CLKSOURCE + * @arg @ref LL_RCC_I2C3_CLKSOURCE (*) + * @note (*) Value not defined for all devices * @retval I2C clock frequency (in Hz) * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready */ @@ -689,6 +690,7 @@ uint32_t LL_RCC_GetCLK48ClockFreq(uint32_t CLK48xSource) } break; +#if defined(RCC_HSI48_SUPPORT) case LL_RCC_CLK48_CLKSOURCE_HSI48: /* HSI48 clock used as CLK48 clock source */ default: if (LL_RCC_HSI48_IsReady() == 1U) @@ -696,6 +698,11 @@ uint32_t LL_RCC_GetCLK48ClockFreq(uint32_t CLK48xSource) clk48_frequency = HSI48_VALUE; } break; +#else + default: + /* Nothing to do */ + break; +#endif } return clk48_frequency; @@ -853,7 +860,6 @@ uint32_t LL_RCC_GetRTCClockFreq(void) uint32_t LL_RCC_GetRFWKPClockFreq(void) { uint32_t rfwkp_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - uint32_t temp = LL_RCC_LSI2_IsReady(); /* RTCCLK clock frequency */ switch (LL_RCC_GetRFWKPClockSource()) @@ -865,13 +871,6 @@ uint32_t LL_RCC_GetRFWKPClockFreq(void) } break; - case LL_RCC_RFWKP_CLKSOURCE_LSI: /* LSI clock used as RF Wakeup clock source */ - if ((LL_RCC_LSI1_IsReady() == 1UL) || (temp == 1UL)) - { - rfwkp_frequency = LSI_VALUE; - } - break; - case LL_RCC_RFWKP_CLKSOURCE_HSE_DIV1024: /* HSE clock used as RF Wakeup clock source */ rfwkp_frequency = HSE_VALUE / 1024U; break; @@ -885,46 +884,6 @@ uint32_t LL_RCC_GetRFWKPClockFreq(void) return rfwkp_frequency; } -#if defined(SPI_I2S_SUPPORT) -/** - * @brief Return I2Sx clock frequency - * @param I2SxSource This parameter can be one of the following values: - * @arg @ref LL_RCC_I2S_CLKSOURCE - * @retval I2S clock frequency (in Hz) - * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) or PLLs (PLL) is not ready - */ -uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) -{ - uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO; - - /* Check parameter */ - assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource)); - - /* I2SCLK clock frequency */ - switch (LL_RCC_GetI2SClockSource(I2SxSource)) - { - case LL_RCC_I2S_CLKSOURCE_PLL: /* I2S2 Clock is PLL"P" */ - if (LL_RCC_PLL_IsReady() == 1U) - { - i2s_frequency = RCC_PLL_GetFreqDomain_I2S(); - } - break; - - case LL_RCC_I2S_CLKSOURCE_PIN: /* I2S2 Clock is External clock */ - i2s_frequency = EXTERNAL_CLOCK_VALUE; - break; - - case LL_RCC_I2S_CLKSOURCE_HSI: /* HSI clock used as I2S clock source */ - default: - if (LL_RCC_HSI_IsReady() == 1U) - { - i2s_frequency = HSI_VALUE; - } - break; - } - return i2s_frequency; -} -#endif /** * @} @@ -942,7 +901,7 @@ uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource) * @brief Return SYSTEM clock (SYSCLK) frequency * @retval SYSTEM clock frequency (in Hz) */ -uint32_t RCC_GetSystemClockFreq(void) +static uint32_t RCC_GetSystemClockFreq(void) { uint32_t frequency; @@ -985,7 +944,7 @@ uint32_t RCC_GetSystemClockFreq(void) * @param SYSCLK_Frequency SYSCLK clock frequency * @retval HCLK1 clock frequency (in Hz) */ -uint32_t RCC_GetHCLK1ClockFreq(uint32_t SYSCLK_Frequency) +static uint32_t RCC_GetHCLK1ClockFreq(uint32_t SYSCLK_Frequency) { /* HCLK clock frequency */ return __LL_RCC_CALC_HCLK1_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler()); @@ -996,7 +955,7 @@ uint32_t RCC_GetHCLK1ClockFreq(uint32_t SYSCLK_Frequency) * @param SYSCLK_Frequency SYSCLK clock frequency * @retval HCLK2 clock frequency (in Hz) */ -uint32_t RCC_GetHCLK2ClockFreq(uint32_t SYSCLK_Frequency) +static uint32_t RCC_GetHCLK2ClockFreq(uint32_t SYSCLK_Frequency) { /* HCLK clock frequency */ return __LL_RCC_CALC_HCLK2_FREQ(SYSCLK_Frequency, LL_C2_RCC_GetAHBPrescaler()); @@ -1007,7 +966,7 @@ uint32_t RCC_GetHCLK2ClockFreq(uint32_t SYSCLK_Frequency) * @param SYSCLK_Frequency SYSCLK clock frequency * @retval HCLK4 clock frequency (in Hz) */ -uint32_t RCC_GetHCLK4ClockFreq(uint32_t SYSCLK_Frequency) +static uint32_t RCC_GetHCLK4ClockFreq(uint32_t SYSCLK_Frequency) { /* HCLK clock frequency */ return __LL_RCC_CALC_HCLK4_FREQ(SYSCLK_Frequency, LL_RCC_GetAHB4Prescaler()); @@ -1017,7 +976,7 @@ uint32_t RCC_GetHCLK4ClockFreq(uint32_t SYSCLK_Frequency) * @brief Return HCLK5 clock frequency * @retval HCLK5 clock frequency (in Hz) */ -uint32_t RCC_GetHCLK5ClockFreq(void) +static uint32_t RCC_GetHCLK5ClockFreq(void) { uint32_t frequency; @@ -1047,7 +1006,7 @@ uint32_t RCC_GetHCLK5ClockFreq(void) * @param HCLK_Frequency HCLK clock frequency * @retval PCLK1 clock frequency (in Hz) */ -uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) +static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) { /* PCLK1 clock frequency */ return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler()); @@ -1058,7 +1017,7 @@ uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency) * @param HCLK_Frequency HCLK clock frequency * @retval PCLK2 clock frequency (in Hz) */ -uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) +static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) { /* PCLK2 clock frequency */ return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler()); @@ -1068,7 +1027,7 @@ uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency) * @brief Return PLL clock (PLLRCLK) frequency used for system domain * @retval PLLRCLK clock frequency (in Hz) */ -uint32_t RCC_PLL_GetFreqDomain_SYS(void) +static uint32_t RCC_PLL_GetFreqDomain_SYS(void) { uint32_t pllinputfreq, pllsource; @@ -1111,7 +1070,7 @@ uint32_t RCC_PLL_GetFreqDomain_SYS(void) * @brief Return PLL clock (PLLPCLK) frequency used for SAI domain * @retval PLLPCLK clock frequency (in Hz) */ -uint32_t RCC_PLL_GetFreqDomain_SAI(void) +static uint32_t RCC_PLL_GetFreqDomain_SAI(void) { uint32_t pllinputfreq, pllsource; @@ -1154,7 +1113,7 @@ uint32_t RCC_PLL_GetFreqDomain_SAI(void) * @brief Return PLL clock (PLLPCLK) frequency used for ADC domain * @retval PLLPCLK clock frequency (in Hz) */ -uint32_t RCC_PLL_GetFreqDomain_ADC(void) +static uint32_t RCC_PLL_GetFreqDomain_ADC(void) { uint32_t pllinputfreq, pllsource; @@ -1198,7 +1157,7 @@ uint32_t RCC_PLL_GetFreqDomain_ADC(void) * @brief Return PLL clock (PLLQCLK) frequency used for 48 MHz domain * @retval PLLQCLK clock frequency (in Hz) */ -uint32_t RCC_PLL_GetFreqDomain_48M(void) +static uint32_t RCC_PLL_GetFreqDomain_48M(void) { uint32_t pllinputfreq, pllsource; @@ -1242,7 +1201,7 @@ uint32_t RCC_PLL_GetFreqDomain_48M(void) * @brief Return PLLSAI1 clock (PLLSAI1PCLK) frequency used for SAI domain * @retval PLLSAI1PCLK clock frequency (in Hz) */ -uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void) +static uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void) { uint32_t pllinputfreq, pllsource; @@ -1284,7 +1243,7 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void) * @brief Return PLLSAI1 clock (PLLSAI1QCLK) frequency used for 48Mhz domain * @retval PLLSAI1QCLK clock frequency (in Hz) */ -uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void) +static uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void) { uint32_t pllinputfreq, pllsource; @@ -1325,7 +1284,7 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void) * @brief Return PLLSAI1 clock (PLLSAI1RCLK) frequency used for ADC domain * @retval PLLSAI1RCLK clock frequency (in Hz) */ -uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void) +static uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void) { uint32_t pllinputfreq, pllsource; @@ -1363,35 +1322,6 @@ uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void) } #endif -#if defined(SPI_I2S_SUPPORT) -/** - * @brief Return PLL clock frequency used for I2S domain - * @retval PLL clock frequency (in Hz) - */ -uint32_t RCC_PLL_GetFreqDomain_I2S(void) -{ - uint32_t pllinputfreq, pllsource; - - /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN - I2S Domain clock = PLL_VCO / PLLP - */ - pllsource = LL_RCC_PLL_GetMainSource(); - - switch (pllsource) - { - case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ - pllinputfreq = HSE_VALUE; - break; - - case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ - default: - pllinputfreq = HSI_VALUE; - break; - } - return __LL_RCC_CALC_PLLCLK_I2S_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(), - LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP()); -} -#endif /** * @} diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c index 5ce7867260..adf4052736 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c @@ -75,9 +75,6 @@ /* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ #define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) -/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */ -#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) - #define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ || ((__VALUE__) == LL_USART_DIRECTION_RX) \ || ((__VALUE__) == LL_USART_DIRECTION_TX) \ @@ -249,9 +246,6 @@ ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_Ini /* Check BRR is greater than or equal to 16d */ assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); - - /* Check BRR is lower than or equal to 0xFFFF */ - assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR)); } /*---------------------------- USART PRESC Configuration ----------------------- @@ -289,7 +283,7 @@ void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) * @brief Initialize USART Clock related settings according to the * specified parameters in the USART_ClockInitStruct. * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0), - * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * USART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. * @param USARTx USART Instance * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure * that contains the Clock configuration information for the specified USART peripheral. @@ -309,37 +303,25 @@ ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef CRx registers */ if (LL_USART_IsEnabled(USARTx) == 0U) { - /*---------------------------- USART CR2 Configuration -----------------------*/ - /* If Clock signal has to be output */ - if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE) - { - /* Deactivate Clock signal delivery : - * - Disable Clock Output: USART_CR2_CLKEN cleared - */ - LL_USART_DisableSCLKOutput(USARTx); - } - else - { - /* Ensure USART instance is USART capable */ - assert_param(IS_USART_INSTANCE(USARTx)); + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); - /* Check clock related parameters */ - assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); - assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); - assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); - /*---------------------------- USART CR2 Configuration ----------------------- - * Configure USARTx CR2 (Clock signal related bits) with parameters: - * - Enable Clock Output: USART_CR2_CLKEN set - * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value - * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value - * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. - */ - MODIFY_REG(USARTx->CR2, - USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, - USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity | - USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); - } + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); } /* Else (USART not in Disabled state => return ERROR */ else diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c index 2a6d2a46b1..538a565264 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c @@ -56,8 +56,8 @@ /** * @brief Initializes the USB Core - * @param USBx: USB Instance - * @param cfg : pointer to a USB_CfgTypeDef structure that contains + * @param USBx USB Instance + * @param cfg pointer to a USB_CfgTypeDef structure that contains * the configuration information for the specified USBx peripheral. * @retval HAL status */ @@ -78,13 +78,16 @@ HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) /** * @brief USB_EnableGlobalInt * Enables the controller's Global Int in the AHB Config reg - * @param USBx : Selected device + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) { uint32_t winterruptmask; + /* Clear pending interrupts */ + USBx->ISTR = 0U; + /* Set winterruptmask variable */ winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM | @@ -92,7 +95,7 @@ HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) USB_CNTR_RESETM | USB_CNTR_L1REQM; /* Set interrupt mask */ - USBx->CNTR |= (uint16_t)winterruptmask; + USBx->CNTR = (uint16_t)winterruptmask; return HAL_OK; } @@ -100,9 +103,9 @@ HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) /** * @brief USB_DisableGlobalInt * Disable the controller's Global Int in the AHB Config reg - * @param USBx : Selected device + * @param USBx Selected device * @retval HAL status -*/ + */ HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) { uint32_t winterruptmask; @@ -120,11 +123,11 @@ HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) } /** - * @brief USB_SetCurrentMode : Set functional mode - * @param USBx : Selected device - * @param mode : current core mode + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode * This parameter can be one of the these values: - * @arg USB_DEVICE_MODE: Peripheral mode mode + * @arg USB_DEVICE_MODE Peripheral mode * @retval HAL status */ HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) @@ -141,10 +144,10 @@ HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode) } /** - * @brief USB_DevInit : Initializes the USB controller registers + * @brief USB_DevInit Initializes the USB controller registers * for device mode - * @param USBx : Selected device - * @param cfg : pointer to a USB_CfgTypeDef structure that contains + * @param USBx Selected device + * @param cfg pointer to a USB_CfgTypeDef structure that contains * the configuration information for the specified USBx peripheral. * @retval HAL status */ @@ -154,89 +157,26 @@ HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) UNUSED(cfg); /* Init Device */ - /*CNTR_FRES = 1*/ + /* CNTR_FRES = 1 */ USBx->CNTR = (uint16_t)USB_CNTR_FRES; - /*CNTR_FRES = 0*/ + /* CNTR_FRES = 0 */ USBx->CNTR = 0U; - /*Clear pending interrupts*/ + /* Clear pending interrupts */ USBx->ISTR = 0U; /*Set Btable Address*/ USBx->BTABLE = BTABLE_ADDRESS; - /* Enable USB Device Interrupt mask */ - (void)USB_EnableGlobalInt(USBx); - - return HAL_OK; -} - -/** - * @brief USB_SetDevSpeed :Initializes the device speed - * depending on the PHY type and the enumeration speed of the device. - * @param USBx Selected device - * @param speed device speed - * @retval Hal status - */ -HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(speed); - - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - - return HAL_OK; -} - -/** - * @brief USB_FlushTxFifo : Flush a Tx FIFO - * @param USBx : Selected device - * @param num : FIFO number - * This parameter can be a value from 1 to 15 - 15 means Flush all Tx FIFOs - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(num); - - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - - return HAL_OK; -} - -/** - * @brief USB_FlushRxFifo : Flush Rx FIFO - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; } +#if defined (HAL_PCD_MODULE_ENABLED) /** * @brief Activate and configure an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure + * @param USBx Selected device + * @param ep pointer to endpoint structure * @retval HAL status */ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) @@ -297,9 +237,11 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) { /*Set the endpoint Receive buffer address */ PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + /*Set the endpoint Receive buffer counter*/ PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); PCD_CLEAR_RX_DTOG(USBx, ep->num); + /* Configure VALID status for the Endpoint*/ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); } @@ -309,6 +251,7 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) { /* Set the endpoint as double buffered */ PCD_SET_EP_DBUF(USBx, ep->num); + /* Set buffer address for double buffered mode */ PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1); @@ -318,9 +261,6 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) PCD_CLEAR_RX_DTOG(USBx, ep->num); PCD_CLEAR_TX_DTOG(USBx, ep->num); - /* Reset value of the data toggle bits for the endpoint out */ - PCD_TX_DTOG(USBx, ep->num); - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); } @@ -329,7 +269,6 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) /* Clear the data toggle bits for the endpoint IN/OUT */ PCD_CLEAR_RX_DTOG(USBx, ep->num); PCD_CLEAR_TX_DTOG(USBx, ep->num); - PCD_RX_DTOG(USBx, ep->num); if (ep->type != EP_TYPE_ISOC) { @@ -351,8 +290,8 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) /** * @brief De-activate and de-initialize an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure + * @param USBx Selected device + * @param ep pointer to endpoint structure * @retval HAL status */ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) @@ -362,12 +301,14 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) if (ep->is_in != 0U) { PCD_CLEAR_TX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); } else { PCD_CLEAR_RX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); } @@ -393,6 +334,7 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) PCD_CLEAR_RX_DTOG(USBx, ep->num); PCD_CLEAR_TX_DTOG(USBx, ep->num); PCD_RX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); @@ -403,15 +345,16 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) } /** - * @brief USB_EPStartXfer : setup and starts a transfer over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure + * @brief USB_EPStartXfer setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure * @retval HAL status */ HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) { - uint16_t pmabuffer; uint32_t len; + uint16_t pmabuffer; + uint16_t wEPVal; /* IN endpoint */ if (ep->is_in == 1U) @@ -420,12 +363,10 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) if (ep->xfer_len > ep->maxpacket) { len = ep->maxpacket; - ep->xfer_len -= len; } else { len = ep->xfer_len; - ep->xfer_len = 0U; } /* configure and validate Tx endpoint */ @@ -436,49 +377,225 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) } else { - /* Write the data to the USB endpoint */ - if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + /* double buffer bulk management */ + if (ep->type == EP_TYPE_BULK) { - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - } + if (ep->xfer_len_db > ep->maxpacket) + { + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the two first buffer in the Buffer0 & Buffer1 */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + /* auto Switch to single buffer mode when transfer <Mps no need to manage in double buffer */ + else + { + len = ep->xfer_len_db; + + /* disable double buffer mode */ + PCD_CLEAR_EP_DBUF(USBx, ep->num); + + /* Set Tx count with nbre of byte to be transmitted */ + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + }/* end if bulk double buffer */ + + /* manage isochronous double buffer IN mode */ else { - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; + /* enable double buffer */ + PCD_SET_EP_DBUF(USBx, ep->num); + + /* each Time to write in PMA xfer_len_db will */ + ep->xfer_len_db -= len; + + /* Fill the data buffer */ + if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + if (len > 0U) + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + ep->xfer_buff += len; + + if (ep->xfer_len_db > ep->maxpacket) + { + ep->xfer_len_db -= len; + } + else + { + len = ep->xfer_len_db; + ep->xfer_len_db = 0U; + } + + if (len > 0U) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + + /* Write the user buffer to USB PMA */ + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); + } + } } - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len); - PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); } PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); } else /* OUT endpoint */ { - /* Multi packet transfer*/ - if (ep->xfer_len > ep->maxpacket) - { - len = ep->maxpacket; - ep->xfer_len -= len; - } - else - { - len = ep->xfer_len; - ep->xfer_len = 0U; - } - - /* configure and validate Rx endpoint */ if (ep->doublebuffer == 0U) { - /*Set RX buffer count*/ + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + /* configure and validate Rx endpoint */ PCD_SET_EP_RX_CNT(USBx, ep->num, len); } else { - /*Set the Double buffer counter*/ - PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */ + /* Set the Double buffer counter */ + if (ep->type == EP_TYPE_BULK) + { + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket); + + /* Coming from ISR */ + if (ep->xfer_count != 0U) + { + /* update last value to check if there is blocking state */ + wEPVal = PCD_GET_ENDPOINT(USBx, ep->num); + + /*Blocking State */ + if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) || + (((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U))) + { + PCD_FreeUserBuffer(USBx, ep->num, 0U); + } + } + } + /* iso out double */ + else if (ep->type == EP_TYPE_ISOC) + { + /* Multi packet transfer */ + if (ep->xfer_len > ep->maxpacket) + { + len = ep->maxpacket; + ep->xfer_len -= len; + } + else + { + len = ep->xfer_len; + ep->xfer_len = 0U; + } + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + else + { + return HAL_ERROR; + } } PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); @@ -487,54 +604,11 @@ HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep) return HAL_OK; } -/** - * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param src : pointer to source buffer - * @param ch_ep_num : endpoint or host channel number - * @param len : Number of bytes to write - * @retval HAL status - */ -HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(src); - UNUSED(ch_ep_num); - UNUSED(len); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_ReadPacket : read a packet from the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param dest : destination pointer - * @param len : Number of bytes to read - * @retval pointer to destination buffer - */ -void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(dest); - UNUSED(len); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return ((void *)NULL); -} /** - * @brief USB_EPSetStall : set a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure + * @brief USB_EPSetStall set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure * @retval HAL status */ HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) @@ -552,9 +626,9 @@ HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) } /** - * @brief USB_EPClearStall : Clear a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure + * @brief USB_EPClearStall Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure * @retval HAL status */ HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) @@ -575,17 +649,18 @@ HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) { PCD_CLEAR_RX_DTOG(USBx, ep->num); - /* Configure VALID status for the Endpoint*/ + /* Configure VALID status for the Endpoint */ PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); } } return HAL_OK; } +#endif /** - * @brief USB_StopDevice : Stop the usb device mode - * @param USBx : Selected device + * @brief USB_StopDevice Stop the usb device mode + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) @@ -603,9 +678,9 @@ HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) } /** - * @brief USB_SetDevAddress : Stop the usb device mode - * @param USBx : Selected device - * @param address : new device address to be assigned + * @brief USB_SetDevAddress Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned * This parameter can be a value from 0 to 255 * @retval HAL status */ @@ -621,8 +696,8 @@ HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address) } /** - * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down - * @param USBx : Selected device + * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) @@ -634,8 +709,8 @@ HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx) } /** - * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down - * @param USBx : Selected device + * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) @@ -647,8 +722,8 @@ HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx) } /** - * @brief USB_ReadInterrupts: return the global USB interrupt status - * @param USBx : Selected device + * @brief USB_ReadInterrupts return the global USB interrupt status + * @param USBx Selected device * @retval HAL status */ uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) @@ -660,113 +735,8 @@ uint32_t USB_ReadInterrupts(USB_TypeDef *USBx) } /** - * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief Returns Device OUT EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device OUT EP Interrupt register - */ -uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(epnum); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief Returns Device IN EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device IN EP Interrupt register - */ -uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(epnum); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief USB_ClearInterrupts: clear a USB interrupt - * @param USBx Selected device - * @param interrupt interrupt flag - * @retval None - */ -void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(interrupt); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ -} - -/** - * @brief Prepare the EP0 to start the first control setup - * @param USBx Selected device - * @param psetup pointer to setup packet - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(USBx); - UNUSED(psetup); - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling - * @param USBx Selected device + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) @@ -777,13 +747,14 @@ HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) } /** - * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling - * @param USBx Selected device + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device * @retval HAL status */ HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) { USBx->CNTR &= (uint16_t)(~USB_CNTR_RESUME); + return HAL_OK; } @@ -792,7 +763,7 @@ HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) * @param USBx USB peripheral instance register address. * @param pbUsrBuf pointer to user memory area. * @param wPMABufAddr address into PMA. - * @param wNBytes: no. of bytes to be copied. + * @param wNBytes no. of bytes to be copied. * @retval None */ void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) @@ -822,11 +793,11 @@ void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, ui } /** - * @brief Copy a buffer from user memory area to packet memory area (PMA) - * @param USBx: USB peripheral instance register address. + * @brief Copy data from packet memory area (PMA) to user memory buffer + * @param USBx USB peripheral instance register address. * @param pbUsrBuf pointer to user memory area. * @param wPMABufAddr address into PMA. - * @param wNBytes: no. of bytes to be copied. + * @param wNBytes no. of bytes to be copied. * @retval None */ void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) diff --git a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c index 19cbaaf7c7..d77d920e50 100644 --- a/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c +++ b/bsp/stm32/libraries/STM32WBxx_HAL/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c @@ -258,7 +258,7 @@ void LL_SetSystemCoreClock(uint32_t HCLKFrequency) */ ErrorStatus LL_SetFlashLatency(uint32_t HCLK4Frequency) { - ErrorStatus status = SUCCESS; + ErrorStatus status = ERROR; uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */ uint16_t index; uint32_t timeout; @@ -283,11 +283,7 @@ ErrorStatus LL_SetFlashLatency(uint32_t HCLK4Frequency) const uint32_t UTILS_LATENCY_RANGE[] = {LL_FLASH_LATENCY_0, LL_FLASH_LATENCY_1, LL_FLASH_LATENCY_2, LL_FLASH_LATENCY_3}; /* Frequency cannot be equal to 0 or greater than max clock */ - if ((HCLK4Frequency == 0U) || (HCLK4Frequency > maxfreq)) - { - status = ERROR; - } - else + if ((HCLK4Frequency > 0U) && (HCLK4Frequency <= maxfreq)) { #if defined(PWR_CR1_VOS) if (voltagescaling == LL_PWR_REGU_VOLTAGE_SCALE1) @@ -297,6 +293,7 @@ ErrorStatus LL_SetFlashLatency(uint32_t HCLK4Frequency) if (HCLK4Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) { latency = UTILS_LATENCY_RANGE[index]; + status = SUCCESS; break; } } @@ -308,6 +305,7 @@ ErrorStatus LL_SetFlashLatency(uint32_t HCLK4Frequency) if (HCLK4Frequency <= UTILS_CLK_SRC_RANGE_VOS2[index]) { latency = UTILS_LATENCY_RANGE[index]; + status = SUCCESS; break; } } @@ -318,11 +316,15 @@ ErrorStatus LL_SetFlashLatency(uint32_t HCLK4Frequency) if (HCLK4Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) { latency = UTILS_LATENCY_RANGE[index]; + status = SUCCESS; break; } } #endif + } + if (status != ERROR) + { LL_FLASH_SetLatency(latency); /* Check that the new number of wait states is taken into account to access the Flash |