Merge branch 'master' into at_client-rt_realloc_iss

# Conflicts:
#	components/net/at/src/at_client.c

230 files changed, 38478 insertions, 2933 deletions

diff --git a/bsp/stm32/README.md b/bsp/stm32/README.md
index 1c355c2d1d..570604a8ba 100644
--- a/bsp/stm32/README.md
+++ b/bsp/stm32/README.md
@@ -26,6 +26,7 @@ STM32 系列 BSP 目前支持情况如下表所示：
 | [stm32f401-st-nucleo](stm32f401-st-nucleo) | ST 官方 STM32F401 Nucleo-64 开发板 |
 | [stm32f405-smdz-breadfruit](stm32f405-smdz-breadfruit) | 三木电子 SM1432F405 开发板 |
 | [stm32f407-atk-explorer](stm32f407-atk-explorer) | 正点原子 F407 探索者开发板 |
+| [stm32f407-robomaster-c](stm32f407-robomaster-c) | 大疆公司 RoboMaster C型开发板 |
 | [stm32f407-st-discovery](stm32f407-st-discovery) | ST 官方 STM32F407-discovery 开发板 |
 | [stm32f410-st-nucleo](stm32f410-st-nucleo) | ST 官方 STM32F410-Nucleo-64 开发板 |
 | [stm32f411-atk-nano](stm32f411-atk-nano/) | 正点原子 F411 NANO 开发板 |
diff --git a/bsp/stm32/libraries/HAL_Drivers/SConscript b/bsp/stm32/libraries/HAL_Drivers/SConscript
index e41a1f0141..dabcc7002c 100644
--- a/bsp/stm32/libraries/HAL_Drivers/SConscript
+++ b/bsp/stm32/libraries/HAL_Drivers/SConscript
@@ -12,7 +12,10 @@ if GetDepend(['RT_USING_PIN']):
     src += ['drv_gpio.c']
 
 if GetDepend(['RT_USING_SERIAL']):
-    src += ['drv_usart.c']
+    if GetDepend(['RT_USING_SERIAL_V2']):
+        src += ['drv_usart_v2.c']
+    else:
+        src += ['drv_usart.c']
 
 if GetDepend(['RT_USING_HWTIMER']):
     src += ['drv_hwtimer.c']
diff --git a/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h b/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
index 0762f9048d..0064309f2e 100644
--- a/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
+++ b/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
@@ -127,6 +127,17 @@ extern "C" {
 #endif
 
 /* DMA1 channel7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler         DMA1_Channel7_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_USART2_TX
+#else /* for L4 */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART2_TX_DMA_IRQ                DMA1_Channel7_IRQn
+#endif
 
 /* DMA2 channel1 */
 #if defined(BSP_UART5_TX_USING_DMA) && !defined(UART5_TX_DMA_INSTANCE)
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_common.c b/bsp/stm32/libraries/HAL_Drivers/drv_common.c
index 74007b6e88..678e4ebadb 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_common.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_common.c
@@ -12,8 +12,12 @@
 #include "board.h"
 
 #ifdef RT_USING_SERIAL
+#ifdef RT_USING_SERIAL_V2
+#include "drv_usart_v2.h"
+#else
 #include "drv_usart.h"
 #endif
+#endif
 
 #ifdef RT_USING_FINSH
 #include <finsh.h>
@@ -113,16 +117,32 @@ void _Error_Handler(char *s, int num)
  */
 void rt_hw_us_delay(rt_uint32_t us)
 {
-    rt_uint32_t start, now, delta, reload, us_tick;
-    start = SysTick->VAL;
-    reload = SysTick->LOAD;
-    us_tick = SystemCoreClock / 1000000UL;
-    do
+    rt_uint32_t ticks;
+    rt_uint32_t told, tnow, tcnt = 0;
+    rt_uint32_t reload = SysTick->LOAD;
+
+    ticks = us * reload / (1000000 / RT_TICK_PER_SECOND);
+    told = SysTick->VAL;
+    while (1)
     {
-        now = SysTick->VAL;
-        delta = start >= now ? start - now : reload + start - now;
+        tnow = SysTick->VAL;
+        if (tnow != told)
+        {
+            if (tnow < told)
+            {
+                tcnt += told - tnow;
+            }
+            else
+            {
+                tcnt += reload - tnow + told;
+            }
+            told = tnow;
+            if (tcnt >= ticks)
+            {
+                break;
+            }
+        }
     }
-    while (delta < us_tick * us);
 }
 
 /**
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_eth.c b/bsp/stm32/libraries/HAL_Drivers/drv_eth.c
index 0506f6495c..41e86b5134 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_eth.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_eth.c
@@ -11,11 +11,10 @@
  * 2019-09-03     xiaofan      optimize link change detection process
  */
 
-#include "board.h"
 #include "drv_config.h"
-#include <netif/ethernetif.h>
-#include "lwipopts.h"
 #include "drv_eth.h"
+#include <netif/ethernetif.h>
+#include <lwipopts.h>
 
 /*
 * Emac driver uses CubeMX tool to generate emac and phy's configuration,
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_lcd.c b/bsp/stm32/libraries/HAL_Drivers/drv_lcd.c
index 5d170016b8..96c61835e6 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_lcd.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_lcd.c
@@ -108,11 +108,11 @@ void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc)
 
 void LTDC_IRQHandler(void)
 {
-    rt_enter_critical();
+    rt_interrupt_enter();
 
     HAL_LTDC_IRQHandler(&LtdcHandle);
 
-    rt_exit_critical();
+    rt_interrupt_leave();
 }
 
 rt_err_t stm32_lcd_init(struct drv_lcd_device *lcd)
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_rtc.c b/bsp/stm32/libraries/HAL_Drivers/drv_rtc.c
index 88c96aa5b8..15968a178c 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_rtc.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_rtc.c
@@ -8,6 +8,7 @@
  * 2018-12-04   balanceTWK    first version
  * 2020-10-14   Dozingfiretruck Porting for stm32wbxx
  * 2021-02-05   Meco Man      fix the problem of mixing local time and UTC time
+ * 2021-07-05   iysheng       implement RTC framework V2.0
  */
 
 #include "board.h"
@@ -25,8 +26,6 @@
 
 #define BKUP_REG_DATA 0xA5A5
 
-static struct rt_device rtc;
-
 static RTC_HandleTypeDef RTC_Handler;
 
 RT_WEAK uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
@@ -102,34 +101,6 @@ static rt_err_t set_rtc_time_stamp(time_t time_stamp)
     return RT_EOK;
 }
 
-static void rt_rtc_init(void)
-{
-#if !defined(SOC_SERIES_STM32H7) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32WB)
-    __HAL_RCC_PWR_CLK_ENABLE();
-#endif
-
-    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-#ifdef BSP_RTC_USING_LSI
-#ifdef SOC_SERIES_STM32WB
-RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI1;
-    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
-    RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
-    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
-#else
-    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI;
-    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
-    RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
-    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
-#endif
-#else
-    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
-    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
-    RCC_OscInitStruct.LSEState = RCC_LSE_ON;
-    RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
-#endif
-    HAL_RCC_OscConfig(&RCC_OscInitStruct);
-}
-
 #ifdef SOC_SERIES_STM32F1
 /* update RTC_BKP_DRx*/
 static void rt_rtc_f1_bkp_update(void)
@@ -160,7 +131,7 @@ static void rt_rtc_f1_bkp_update(void)
 }
 #endif
 
-static rt_err_t rt_rtc_config(struct rt_device *dev)
+static rt_err_t rt_rtc_config(void)
 {
     RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
 
@@ -234,81 +205,90 @@ static rt_err_t rt_rtc_config(struct rt_device *dev)
     return RT_EOK;
 }
 
-static rt_err_t rt_rtc_control(rt_device_t dev, int cmd, void *args)
+static rt_err_t stm32_rtc_init(void)
 {
-    rt_err_t result = RT_EOK;
-    RT_ASSERT(dev != RT_NULL);
-    switch (cmd)
+#if !defined(SOC_SERIES_STM32H7) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32WB)
+    __HAL_RCC_PWR_CLK_ENABLE();
+#endif
+
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+#ifdef BSP_RTC_USING_LSI
+#ifdef SOC_SERIES_STM32WB
+RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI1;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+#else
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    RCC_OscInitStruct.LSEState = RCC_LSE_OFF;
+    RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+#endif
+#else
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+    RCC_OscInitStruct.LSIState = RCC_LSI_OFF;
+#endif
+    HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+    if (rt_rtc_config() != RT_EOK)
     {
-    case RT_DEVICE_CTRL_RTC_GET_TIME:
-        *(rt_uint32_t *)args = get_rtc_timestamp();
-        LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args);
-        break;
+        LOG_E("rtc init failed.");
+        return -RT_ERROR;
+    }
 
-    case RT_DEVICE_CTRL_RTC_SET_TIME:
-        if (set_rtc_time_stamp(*(rt_uint32_t *)args))
-        {
-            result = -RT_ERROR;
-        }
-        LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args);
-        break;
+    return RT_EOK;
+}
+
+static rt_err_t stm32_rtc_get_secs(void *args)
+{
+    *(rt_uint32_t *)args = get_rtc_timestamp();
+    LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args);
+
+    return RT_EOK;
+}
+
+static rt_err_t stm32_rtc_set_secs(void *args)
+{
+    rt_err_t result = RT_EOK;
+
+    if (set_rtc_time_stamp(*(rt_uint32_t *)args))
+    {
+        result = -RT_ERROR;
     }
+    LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args);
 
     return result;
 }
 
-#ifdef RT_USING_DEVICE_OPS
-const static struct rt_device_ops rtc_ops =
+static const struct rt_rtc_ops stm32_rtc_ops =
 {
+    stm32_rtc_init,
+    stm32_rtc_get_secs, /* get_secs */
+    stm32_rtc_set_secs, /* set secs */
     RT_NULL,
     RT_NULL,
     RT_NULL,
     RT_NULL,
-    RT_NULL,
-    rt_rtc_control
 };
-#endif
 
-static rt_err_t rt_hw_rtc_register(rt_device_t device, const char *name, rt_uint32_t flag)
-{
-    RT_ASSERT(device != RT_NULL);
+static rt_rtc_dev_t stm32_rtc_dev;
 
-    rt_rtc_init();
-    if (rt_rtc_config(device) != RT_EOK)
-    {
-        return -RT_ERROR;
-    }
-#ifdef RT_USING_DEVICE_OPS
-    device->ops         = &rtc_ops;
-#else
-    device->init        = RT_NULL;
-    device->open        = RT_NULL;
-    device->close       = RT_NULL;
-    device->read        = RT_NULL;
-    device->write       = RT_NULL;
-    device->control     = rt_rtc_control;
-#endif
-    device->type        = RT_Device_Class_RTC;
-    device->rx_indicate = RT_NULL;
-    device->tx_complete = RT_NULL;
-    device->user_data   = RT_NULL;
-
-    /* register a character device */
-    return rt_device_register(device, name, flag);
-}
-
-int rt_hw_rtc_init(void)
+static int rt_hw_rtc_init(void)
 {
     rt_err_t result;
-    result = rt_hw_rtc_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
+
+    stm32_rtc_dev.ops = &stm32_rtc_ops;
+    result = rt_rtc_dev_register(&stm32_rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR, RT_NULL);
     if (result != RT_EOK)
     {
         LOG_E("rtc register err code: %d", result);
         return result;
     }
     LOG_D("rtc init success");
+
     return RT_EOK;
 }
 INIT_DEVICE_EXPORT(rt_hw_rtc_init);
-
 #endif /* BSP_USING_ONCHIP_RTC */
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
new file mode 100644
index 0000000000..1f84d848a0
--- /dev/null
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
@@ -0,0 +1,1138 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-06-01     KyleChan     first version
+ */
+
+#include "board.h"
+#include "drv_usart_v2.h"
+
+#ifdef RT_USING_SERIAL_V2
+
+//#define DRV_DEBUG
+#define DBG_TAG              "drv.usart"
+#ifdef DRV_DEBUG
+#define DBG_LVL               DBG_LOG
+#else
+#define DBG_LVL               DBG_INFO
+#endif /* DRV_DEBUG */
+#include <rtdbg.h>
+
+#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && \
+    !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && \
+    !defined(BSP_USING_UART7) && !defined(BSP_USING_UART8) && !defined(BSP_USING_LPUART1)
+    #error "Please define at least one BSP_USING_UARTx"
+    /* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
+#endif
+
+#ifdef RT_SERIAL_USING_DMA
+    static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag);
+#endif
+
+enum
+{
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_INDEX,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_INDEX,
+#endif
+
+#ifdef BSP_USING_UART5
+    UART5_INDEX,
+#endif
+
+#ifdef BSP_USING_UART6
+    UART6_INDEX,
+#endif
+
+#ifdef BSP_USING_UART7
+    UART7_INDEX,
+#endif
+
+#ifdef BSP_USING_UART8
+    UART8_INDEX,
+#endif
+
+#ifdef BSP_USING_LPUART1
+    LPUART1_INDEX,
+#endif
+};
+
+static struct stm32_uart_config uart_config[] =
+{
+#ifdef BSP_USING_UART1
+    UART1_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_CONFIG,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_CONFIG,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_CONFIG,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_CONFIG,
+#endif
+#ifdef BSP_USING_UART8
+    UART8_CONFIG,
+#endif
+#ifdef BSP_USING_LPUART1
+    LPUART1_CONFIG,
+#endif
+};
+
+
+static struct stm32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
+
+static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    uart->handle.Instance          = uart->config->Instance;
+    uart->handle.Init.BaudRate     = cfg->baud_rate;
+    uart->handle.Init.HwFlowCtl    = UART_HWCONTROL_NONE;
+    uart->handle.Init.Mode         = UART_MODE_TX_RX;
+    uart->handle.Init.OverSampling = UART_OVERSAMPLING_16;
+
+    if(uart->handle.Instance == USART3)
+    {
+        uart->handle.Init.HwFlowCtl    = UART_HWCONTROL_RTS_CTS;
+    }
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_8:
+        if (cfg->parity == PARITY_ODD || cfg->parity == PARITY_EVEN)
+            uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        else
+            uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    case DATA_BITS_9:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        break;
+    default:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_1:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    case STOP_BITS_2:
+        uart->handle.Init.StopBits   = UART_STOPBITS_2;
+        break;
+    default:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    }
+
+    switch (cfg->parity)
+    {
+    case PARITY_NONE:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    case PARITY_ODD:
+        uart->handle.Init.Parity     = UART_PARITY_ODD;
+        break;
+    case PARITY_EVEN:
+        uart->handle.Init.Parity     = UART_PARITY_EVEN;
+        break;
+    default:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    }
+
+#ifdef RT_SERIAL_USING_DMA
+    uart->dma_rx.remaining_cnt = serial->config.rx_bufsz;
+#endif
+
+    if (HAL_UART_Init(&uart->handle) != HAL_OK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct stm32_uart *uart;
+
+    rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if(ctrl_arg & (RT_DEVICE_FLAG_RX_BLOCKING | RT_DEVICE_FLAG_RX_NON_BLOCKING))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_RX)
+            ctrl_arg = RT_DEVICE_FLAG_DMA_RX;
+        else
+            ctrl_arg = RT_DEVICE_FLAG_INT_RX;
+    }
+    else if(ctrl_arg & (RT_DEVICE_FLAG_TX_BLOCKING | RT_DEVICE_FLAG_TX_NON_BLOCKING))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+            ctrl_arg = RT_DEVICE_FLAG_DMA_TX;
+        else
+            ctrl_arg = RT_DEVICE_FLAG_INT_TX;
+    }
+
+    switch (cmd)
+    {
+    /* disable interrupt */
+    case RT_DEVICE_CTRL_CLR_INT:
+
+        NVIC_DisableIRQ(uart->config->irq_type);
+        if (ctrl_arg == RT_DEVICE_FLAG_INT_RX)
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+        else if (ctrl_arg == RT_DEVICE_FLAG_INT_TX)
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+#ifdef RT_SERIAL_USING_DMA
+        else if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX)
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+
+            HAL_NVIC_DisableIRQ(uart->config->dma_rx->dma_irq);
+            if (HAL_DMA_Abort(&(uart->dma_rx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+
+            if (HAL_DMA_DeInit(&(uart->dma_rx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+        }
+        else if(ctrl_arg == RT_DEVICE_FLAG_DMA_TX)
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TC);
+
+            HAL_NVIC_DisableIRQ(uart->config->dma_tx->dma_irq);
+            if (HAL_DMA_DeInit(&(uart->dma_tx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+        }
+#endif
+        break;
+
+    case RT_DEVICE_CTRL_SET_INT:
+
+        HAL_NVIC_SetPriority(uart->config->irq_type, 1, 0);
+        HAL_NVIC_EnableIRQ(uart->config->irq_type);
+
+        if (ctrl_arg == RT_DEVICE_FLAG_INT_RX)
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_RXNE);
+        else if (ctrl_arg == RT_DEVICE_FLAG_INT_TX)
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_TXE);
+        break;
+
+    case RT_DEVICE_CTRL_CONFIG:
+        if (ctrl_arg & (RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX))
+        {
+
+#ifdef RT_SERIAL_USING_DMA
+            stm32_dma_config(serial, ctrl_arg);
+#endif
+        }
+        else
+            stm32_control(serial, RT_DEVICE_CTRL_SET_INT, (void *)ctrl_arg);
+        break;
+
+    case RT_DEVICE_CHECK_OPTMODE:
+        {
+            if (ctrl_arg & RT_DEVICE_FLAG_DMA_TX)
+                return RT_SERIAL_TX_BLOCKING_NO_BUFFER;
+            else
+                return RT_SERIAL_TX_BLOCKING_BUFFER;
+        }
+    case RT_DEVICE_CTRL_CLOSE:
+        if (HAL_UART_DeInit(&(uart->handle)) != HAL_OK )
+        {
+            RT_ASSERT(0)
+        }
+        break;
+
+    }
+    return RT_EOK;
+}
+
+static int stm32_putc(struct rt_serial_device *serial, char c)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    while (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) == RESET);
+    UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+    UART_SET_TDR(&uart->handle, c);
+
+    return 1;
+}
+
+static int stm32_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    ch = -1;
+    if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
+        ch = UART_GET_RDR(&uart->handle);
+    return ch;
+}
+
+static rt_size_t stm32_transmit(struct rt_serial_device     *serial,
+                                       rt_uint8_t           *buf,
+                                       rt_size_t             size,
+                                       rt_uint32_t           tx_flag)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(buf != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+    {
+        HAL_UART_Transmit_DMA(&uart->handle, buf, size);
+        return size;
+    }
+
+    stm32_control(serial, RT_DEVICE_CTRL_SET_INT, (void *)tx_flag);
+
+    return size;
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static void dma_recv_isr(struct rt_serial_device *serial, rt_uint8_t isr_flag)
+{
+    struct stm32_uart *uart;
+    rt_base_t level;
+    rt_size_t recv_len, counter;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    level = rt_hw_interrupt_disable();
+    recv_len = 0;
+    counter = __HAL_DMA_GET_COUNTER(&(uart->dma_rx.handle));
+
+    switch (isr_flag)
+    {
+    case UART_RX_DMA_IT_IDLE_FLAG:
+        if (counter <= uart->dma_rx.remaining_cnt)
+            recv_len = uart->dma_rx.remaining_cnt - counter;
+        else
+            recv_len = serial->config.rx_bufsz + uart->dma_rx.remaining_cnt - counter;
+        break;
+
+    case UART_RX_DMA_IT_HT_FLAG:
+        if (counter < uart->dma_rx.remaining_cnt)
+            recv_len = uart->dma_rx.remaining_cnt - counter;
+        break;
+
+    case UART_RX_DMA_IT_TC_FLAG:
+        if(counter >= uart->dma_rx.remaining_cnt)
+            recv_len = serial->config.rx_bufsz + uart->dma_rx.remaining_cnt - counter;
+
+    default:
+        break;
+    }
+
+    if (recv_len)
+    {
+        uart->dma_rx.remaining_cnt = counter;
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8));
+    }
+    rt_hw_interrupt_enable(level);
+
+}
+#endif  /* RT_SERIAL_USING_DMA */
+
+
+/**
+ * Uart common interrupt process. This need add to uart ISR.
+ *
+ * @param serial serial device
+ */
+static void uart_isr(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    /* If the Read data register is not empty and the RXNE interrupt is enabled  （RDR） */
+    if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET) &&
+            (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_RXNE) != RESET))
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), UART_GET_RDR(&uart->handle));
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+    /* If the Transmit data register is empty and the TXE interrupt enable is enabled  （TDR）*/
+    else if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET) &&
+                (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TXE)) != RESET)
+    {
+        struct rt_serial_tx_fifo *tx_fifo;
+        tx_fifo = (struct rt_serial_tx_fifo *) serial->serial_tx;
+        RT_ASSERT(tx_fifo != RT_NULL);
+
+        rt_uint8_t put_char = 0;
+        if (rt_ringbuffer_getchar(&(tx_fifo->rb), &put_char))
+        {
+            UART_SET_TDR(&uart->handle, put_char);
+        }
+        else
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_TC);
+        }
+    }
+    else if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) &&
+            (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TC) != RESET))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+        {
+            /* The HAL_UART_TxCpltCallback will be triggered */
+            HAL_UART_IRQHandler(&(uart->handle));
+        }
+        else
+        {
+            /* Transmission complete interrupt disable ( CR1 Register) */
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TC);
+            rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+        }
+        /* Clear Transmission complete interrupt flag ( ISR Register ) */
+        UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+    }
+
+#ifdef RT_SERIAL_USING_DMA
+    else if ((uart->uart_dma_flag) && (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_IDLE) != RESET)
+             && (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_IDLE) != RESET))
+    {
+        dma_recv_isr(serial, UART_RX_DMA_IT_IDLE_FLAG);
+        __HAL_UART_CLEAR_IDLEFLAG(&uart->handle);
+    }
+#endif
+    else
+    {
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_ORE) != RESET)
+        {
+            LOG_E("(%s) serial device Overrun error!", serial->parent.parent.name);
+            __HAL_UART_CLEAR_OREFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_NE) != RESET)
+        {
+            __HAL_UART_CLEAR_NEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_FE) != RESET)
+        {
+            __HAL_UART_CLEAR_FEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_PE) != RESET)
+        {
+            __HAL_UART_CLEAR_PEFLAG(&uart->handle);
+        }
+#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0) \
+    && !defined(SOC_SERIES_STM32L0) && !defined(SOC_SERIES_STM32G0) && !defined(SOC_SERIES_STM32H7) \
+    && !defined(SOC_SERIES_STM32G4) && !defined(SOC_SERIES_STM32MP1) && !defined(SOC_SERIES_STM32WB)
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBD);
+        }
+#endif
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_CTS) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_CTS);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TXE);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_RXNE);
+        }
+    }
+}
+
+#if defined(BSP_USING_UART1)
+void USART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART1_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
+void UART1_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
+void UART1_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA) */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+void USART2_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART2_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA)
+void UART2_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART2_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA)
+void UART2_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART2_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA) */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+void USART3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART3_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_RX_USING_DMA)
+void UART3_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART3_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_RX) && defined(BSP_UART3_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_TX_USING_DMA)
+void UART3_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART3_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_TX) && defined(BSP_UART3_TX_USING_DMA) */
+#endif /* BSP_USING_UART3*/
+
+#if defined(BSP_USING_UART4)
+void UART4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART4_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_RX_USING_DMA)
+void UART4_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART4_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_RX) && defined(BSP_UART4_RX_USING_DMA) */
+
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_TX_USING_DMA)
+void UART4_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART4_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_TX) && defined(BSP_UART4_TX_USING_DMA) */
+#endif /* BSP_USING_UART4*/
+
+#if defined(BSP_USING_UART5)
+void UART5_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART5_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA)
+void UART5_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART5_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA)
+void UART5_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART5_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA) */
+#endif /* BSP_USING_UART5*/
+
+#if defined(BSP_USING_UART6)
+void USART6_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART6_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA)
+void UART6_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART6_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA)
+void UART6_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART6_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA) */
+#endif /* BSP_USING_UART6*/
+
+#if defined(BSP_USING_UART7)
+void UART7_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART7_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA)
+void UART7_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART7_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA)
+void UART7_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART7_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA) */
+#endif /* BSP_USING_UART7*/
+
+#if defined(BSP_USING_UART8)
+void UART8_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART8_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA)
+void UART8_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART8_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA)
+void UART8_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART8_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA) */
+#endif /* BSP_USING_UART8*/
+
+#if defined(BSP_USING_LPUART1)
+void LPUART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[LPUART1_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA)
+void LPUART1_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[LPUART1_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA) */
+#endif /* BSP_USING_LPUART1*/
+static void stm32_uart_get_config(void)
+{
+    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+#ifdef BSP_USING_UART1
+    uart_obj[UART1_INDEX].serial.config = config;
+    uart_obj[UART1_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART1_INDEX].serial.config.rx_bufsz = BSP_UART1_RX_BUFSIZE;
+    uart_obj[UART1_INDEX].serial.config.tx_bufsz = BSP_UART1_TX_BUFSIZE;
+
+#ifdef BSP_UART1_RX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart1_dma_rx = UART1_DMA_RX_CONFIG;
+    uart_config[UART1_INDEX].dma_rx = &uart1_dma_rx;
+#endif
+
+#ifdef BSP_UART1_TX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart1_dma_tx = UART1_DMA_TX_CONFIG;
+    uart_config[UART1_INDEX].dma_tx = &uart1_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART2
+    uart_obj[UART2_INDEX].serial.config = config;
+    uart_obj[UART2_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART2_INDEX].serial.config.rx_bufsz = BSP_UART2_RX_BUFSIZE;
+    uart_obj[UART2_INDEX].serial.config.tx_bufsz = BSP_UART2_TX_BUFSIZE;
+
+#ifdef BSP_UART2_RX_USING_DMA
+    uart_obj[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart2_dma_rx = UART2_DMA_RX_CONFIG;
+    uart_config[UART2_INDEX].dma_rx = &uart2_dma_rx;
+#endif
+
+#ifdef BSP_UART2_TX_USING_DMA
+    uart_obj[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart2_dma_tx = UART2_DMA_TX_CONFIG;
+    uart_config[UART2_INDEX].dma_tx = &uart2_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART3
+    uart_obj[UART3_INDEX].serial.config = config;
+    uart_obj[UART3_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART3_INDEX].serial.config.rx_bufsz = BSP_UART3_RX_BUFSIZE;
+    uart_obj[UART3_INDEX].serial.config.tx_bufsz = BSP_UART3_TX_BUFSIZE;
+
+#ifdef BSP_UART3_RX_USING_DMA
+    uart_obj[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart3_dma_rx = UART3_DMA_RX_CONFIG;
+    uart_config[UART3_INDEX].dma_rx = &uart3_dma_rx;
+#endif
+
+#ifdef BSP_UART3_TX_USING_DMA
+    uart_obj[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart3_dma_tx = UART3_DMA_TX_CONFIG;
+    uart_config[UART3_INDEX].dma_tx = &uart3_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART4
+    uart_obj[UART4_INDEX].serial.config = config;
+    uart_obj[UART4_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART4_INDEX].serial.config.rx_bufsz = BSP_UART4_RX_BUFSIZE;
+    uart_obj[UART4_INDEX].serial.config.tx_bufsz = BSP_UART4_TX_BUFSIZE;
+
+#ifdef BSP_UART4_RX_USING_DMA
+    uart_obj[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart4_dma_rx = UART4_DMA_RX_CONFIG;
+    uart_config[UART4_INDEX].dma_rx = &uart4_dma_rx;
+#endif
+
+#ifdef BSP_UART4_TX_USING_DMA
+    uart_obj[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart4_dma_tx = UART4_DMA_TX_CONFIG;
+    uart_config[UART4_INDEX].dma_tx = &uart4_dma_tx;
+#endif
+#endif
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag)
+{
+    struct rt_serial_rx_fifo *rx_fifo;
+    DMA_HandleTypeDef *DMA_Handle;
+    struct dma_config *dma_config;
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        DMA_Handle = &uart->dma_rx.handle;
+        dma_config = uart->config->dma_rx;
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        DMA_Handle = &uart->dma_tx.handle;
+        dma_config = uart->config->dma_tx;
+    }
+    LOG_D("%s dma config start", uart->config->name);
+
+    {
+        rt_uint32_t tmpreg = 0x00U;
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32L0)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHBENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \
+    || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32MP1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+#endif
+
+#if defined(DMAMUX1) && (defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB))
+        /* enable DMAMUX clock for L4+ and G4 */
+        __HAL_RCC_DMAMUX1_CLK_ENABLE();
+#elif defined(SOC_SERIES_STM32MP1)
+        __HAL_RCC_DMAMUX_CLK_ENABLE();
+#endif
+
+        UNUSED(tmpreg);   /* To avoid compiler warnings */
+    }
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        __HAL_LINKDMA(&(uart->handle), hdmarx, uart->dma_rx.handle);
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        __HAL_LINKDMA(&(uart->handle), hdmatx, uart->dma_tx.handle);
+    }
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)
+    DMA_Handle->Instance                 = dma_config->Instance;
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Channel             = dma_config->channel;
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\
+    || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Request             = dma_config->request;
+#endif
+    DMA_Handle->Init.PeriphInc           = DMA_PINC_DISABLE;
+    DMA_Handle->Init.MemInc              = DMA_MINC_ENABLE;
+    DMA_Handle->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    DMA_Handle->Init.MemDataAlignment    = DMA_MDATAALIGN_BYTE;
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        DMA_Handle->Init.Direction           = DMA_PERIPH_TO_MEMORY;
+        DMA_Handle->Init.Mode                = DMA_CIRCULAR;
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        DMA_Handle->Init.Direction           = DMA_MEMORY_TO_PERIPH;
+        DMA_Handle->Init.Mode                = DMA_NORMAL;
+    }
+
+    DMA_Handle->Init.Priority            = DMA_PRIORITY_MEDIUM;
+#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Init.FIFOMode            = DMA_FIFOMODE_DISABLE;
+#endif
+    if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    if (HAL_DMA_Init(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    /* enable interrupt */
+    if (flag == RT_DEVICE_FLAG_DMA_RX)
+    {
+        rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+        /* Start DMA transfer */
+        if (HAL_UART_Receive_DMA(&(uart->handle), rx_fifo->buffer, serial->config.rx_bufsz) != HAL_OK)
+        {
+            /* Transfer error in reception process */
+            RT_ASSERT(0);
+        }
+        CLEAR_BIT(uart->handle.Instance->CR3, USART_CR3_EIE);
+        __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_IDLE);
+    }
+
+    /* DMA irq should set in DMA TX mode, or HAL_UART_TxCpltCallback function will not be called */
+    HAL_NVIC_SetPriority(dma_config->dma_irq, 0, 0);
+    HAL_NVIC_EnableIRQ(dma_config->dma_irq);
+
+    HAL_NVIC_SetPriority(uart->config->irq_type, 1, 0);
+    HAL_NVIC_EnableIRQ(uart->config->irq_type);
+
+    LOG_D("%s dma %s instance: %x", uart->config->name, flag == RT_DEVICE_FLAG_DMA_RX ? "RX" : "TX", DMA_Handle->Instance);
+    LOG_D("%s dma config done", uart->config->name);
+}
+
+/**
+  * @brief  UART error callbacks
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report transfer error, and you can
+  *         add your own implementation.
+  * @retval None
+  */
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+    RT_ASSERT(huart != NULL);
+    struct stm32_uart *uart = (struct stm32_uart *)huart;
+    LOG_D("%s: %s %d\n", __FUNCTION__, uart->config->name, huart->ErrorCode);
+    UNUSED(uart);
+}
+
+/**
+  * @brief  Rx Transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx transfer, and
+  *         you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+    dma_recv_isr(&uart->serial, UART_RX_DMA_IT_TC_FLAG);
+}
+
+/**
+  * @brief  Rx Half transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx Half transfer,
+  *         and you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+    dma_recv_isr(&uart->serial, UART_RX_DMA_IT_HT_FLAG);
+}
+
+/**
+  * @brief  HAL_UART_TxCpltCallback
+  * @param  huart: UART handle
+  * @note   This callback can be called by two functions, first in UART_EndTransmit_IT when
+  *         UART Tx complete and second in UART_DMATransmitCplt function in DMA Circular mode.
+  * @retval None
+  */
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    struct rt_serial_device *serial;
+    rt_size_t trans_total_index;
+    rt_base_t level;
+
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+    serial = &uart->serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    level = rt_hw_interrupt_disable();
+    trans_total_index = __HAL_DMA_GET_COUNTER(&(uart->dma_tx.handle));
+    rt_hw_interrupt_enable(level);
+
+    if (trans_total_index) return;
+
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DMADONE);
+
+}
+#endif  /* RT_SERIAL_USING_DMA */
+
+static const struct rt_uart_ops stm32_uart_ops =
+{
+    .configure = stm32_configure,
+    .control = stm32_control,
+    .putc = stm32_putc,
+    .getc = stm32_getc,
+    .transmit = stm32_transmit
+};
+
+int rt_hw_usart_init(void)
+{
+    rt_err_t result = 0;
+    rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct stm32_uart);
+
+    stm32_uart_get_config();
+    for (int i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        uart_obj[i].config = &uart_config[i];
+        uart_obj[i].serial.ops = &stm32_uart_ops;
+        /* register UART device */
+        result = rt_hw_serial_register(&uart_obj[i].serial,
+                                        uart_obj[i].config->name,
+                                        RT_DEVICE_FLAG_RDWR,
+                                        NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif /* RT_USING_SERIAL_V2 */
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h
new file mode 100644
index 0000000000..9cab81bbff
--- /dev/null
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-06-01     KyleChan     first version
+ */
+
+#ifndef __DRV_USART_V2_H__
+#define __DRV_USART_V2_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <rthw.h>
+#include <drv_common.h>
+#include <drv_dma.h>
+#include <drv_config.h>
+
+int rt_hw_usart_init(void);
+
+#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
+    || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32G4)
+#define UART_SET_TDR(__HANDLE__, __DATA__)  ((__HANDLE__)->Instance->TDR = (__DATA__))
+#define UART_GET_RDR(__HANDLE__)            ((__HANDLE__)->Instance->RDR & 0xFF)
+
+#else
+#define UART_SET_TDR(__HANDLE__, __DATA__)  ((__HANDLE__)->Instance->DR = (__DATA__))
+#define UART_GET_RDR(__HANDLE__)            ((__HANDLE__)->Instance->DR & 0xFF)
+#endif
+
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F2) \
+    || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_FLAG
+#elif defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32MP1)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_IT
+#endif
+
+#define UART_RX_DMA_IT_IDLE_FLAG        0x00
+#define UART_RX_DMA_IT_HT_FLAG          0x01
+#define UART_RX_DMA_IT_TC_FLAG          0x02
+
+
+/* stm32 config class */
+struct stm32_uart_config
+{
+    const char *name;
+    USART_TypeDef *Instance;
+    IRQn_Type irq_type;
+
+#ifdef RT_SERIAL_USING_DMA
+    struct dma_config *dma_rx;
+    struct dma_config *dma_tx;
+#endif
+};
+
+/* stm32 uart dirver class */
+struct stm32_uart
+{
+    UART_HandleTypeDef handle;
+    struct stm32_uart_config *config;
+
+#ifdef RT_SERIAL_USING_DMA
+    struct
+    {
+        DMA_HandleTypeDef handle;
+        rt_size_t remaining_cnt;
+    } dma_rx;
+    struct
+    {
+        DMA_HandleTypeDef handle;
+    } dma_tx;
+#endif
+    rt_uint16_t uart_dma_flag;
+    struct rt_serial_device serial;
+};
+
+#endif  /* __DRV_USART_H__ */
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_usbh.c b/bsp/stm32/libraries/HAL_Drivers/drv_usbh.c
index ad65accd07..9486e1a56d 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_usbh.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_usbh.c
@@ -197,6 +197,8 @@ static struct uhcd_ops _uhcd_ops =
 
 static rt_err_t stm32_hcd_init(rt_device_t device)
 {
+    HAL_StatusTypeDef state;
+
     HCD_HandleTypeDef *hhcd = (HCD_HandleTypeDef *)device->user_data;
     hhcd->Instance = USB_OTG_FS;
     hhcd->Init.Host_channels = 8;
@@ -204,7 +206,11 @@ static rt_err_t stm32_hcd_init(rt_device_t device)
     hhcd->Init.dma_enable = DISABLE;
     hhcd->Init.phy_itface = HCD_PHY_EMBEDDED;
     hhcd->Init.Sof_enable = DISABLE;
-    RT_ASSERT(HAL_HCD_Init(hhcd) == HAL_OK);
+    state = HAL_HCD_Init(hhcd);
+    if (state != HAL_OK)
+    {
+        return -RT_ERROR;
+    }
     HAL_HCD_Start(hhcd);
 #ifdef USBH_USING_CONTROLLABLE_POWER
     rt_pin_mode(USBH_POWER_PIN, PIN_MODE_OUTPUT);
diff --git a/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/CubeMX_Config.ioc
index 1094ab3d37..976274a19f 100644
--- a/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -31,20 +31,22 @@ NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
-PA10.Mode=Synchronous
-PA10.Signal=USART1_RX
-PA13.Mode=Serial_Wire
-PA13.Signal=SYS_SWDIO
-PA14.Mode=Serial_Wire
-PA14.Signal=SYS_SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
-PA8.Mode=Synchronous
-PA8.Signal=USART1_CK
-PA9.Mode=Synchronous
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
 PCC.Checker=false
 PCC.Line=STM32F0x1
 PCC.MCU=STM32F091R(B-C)Tx
diff --git a/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
index 8bdf8316f9..d8fd04634f 100644
--- a/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32f0xx/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,12 +114,11 @@ void HAL_USART_MspInit(USART_HandleTypeDef* husart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA8     ------> USART1_CK
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -152,15 +151,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -189,11 +188,11 @@ void HAL_USART_MspDeInit(USART_HandleTypeDef* husart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA8     ------> USART1_CK
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10);
 
@@ -221,10 +220,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/CubeMX_Config.ioc
index ebb24e61e1..fc443045df 100644
--- a/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/CubeMX_Config.ioc
@@ -33,14 +33,18 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PCC.Checker=false
 PCC.Line=STM32F103
 PCC.MCU=STM32F103R(8-B)Tx
diff --git a/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 990a7ba098..7c454fe98f 100644
--- a/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32f10x/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,7 +92,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -117,11 +117,10 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -130,7 +129,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
     /* USART1 interrupt Init */
@@ -158,10 +157,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/CubeMX_Config.ioc
index 020f6ec89f..d61f038985 100644
--- a/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -35,16 +35,24 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
+PC6.GPIOParameters=GPIO_PuPd
+PC6.GPIO_PuPd=GPIO_PULLUP
 PC6.Mode=Asynchronous
 PC6.Signal=USART6_TX
+PC7.GPIOParameters=GPIO_PuPd
+PC7.GPIO_PuPd=GPIO_PULLUP
 PC7.Mode=Asynchronous
 PC7.Signal=USART6_RX
 PCC.Checker=false
diff --git a/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/Src/stm32f2xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/Src/stm32f2xx_hal_msp.c
index 14b4f29801..b82ce057a6 100644
--- a/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/Src/stm32f2xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32f2xx/board/CubeMX_Config/Src/stm32f2xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f2xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,11 +93,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -117,11 +117,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART6_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART6 GPIO Configuration    
+    /**USART6 GPIO Configuration
     PC6     ------> USART6_TX
-    PC7     ------> USART6_RX 
+    PC7     ------> USART6_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -152,10 +152,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -170,10 +170,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART6_CLK_DISABLE();
-  
-    /**USART6 GPIO Configuration    
+
+    /**USART6 GPIO Configuration
     PC6     ------> USART6_TX
-    PC7     ------> USART6_RX 
+    PC7     ------> USART6_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
 
diff --git a/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/CubeMX_Config.ioc
index 819eb4c535..af20b2f559 100644
--- a/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -33,14 +33,18 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PCC.Checker=false
 PCC.Line=STM32F407/417
 PCC.MCU=STM32F407Z(E-G)Tx
diff --git a/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index e00b8556d6..5317e6153f 100644
--- a/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32f4xx/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,11 +114,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -154,10 +154,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/CubeMX_Config.ioc
index f448b00af0..48a95f7173 100644
--- a/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -32,12 +32,14 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
-PA10.Locked=true
-PA10.Mode=Asynchronous
-PA10.Signal=USART1_RX
-PA9.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
 PCC.Checker=false
 PCC.Line=STM32F7x7
 PCC.MCU=STM32F767I(G-I)Tx
diff --git a/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index 14389e19c8..5d95c709fb 100644
--- a/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32f7xx/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,15 +114,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -151,10 +151,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/CubeMX_Config.ioc
index 9e9e62d7db..714cc55bde 100644
--- a/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -34,16 +34,18 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13\ (JTMS/SWDIO).Mode=Serial_Wire
 PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO
 PA14\ (JTCK/SWCLK).Mode=Serial_Wire
 PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PCC.Checker=false
 PCC.Line=STM32H743/753
 PCC.MCU=STM32H743IITx
diff --git a/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
index 5068dde011..552069eb52 100644
--- a/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32h7xx/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,15 +113,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -153,10 +153,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/libraries/templates/stm32l1xx/board/CubeMX_Config/Src/stm32l1xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32l1xx/board/CubeMX_Config/Src/stm32l1xx_hal_msp.c
index 395a337aac..b0a59f2049 100644
--- a/bsp/stm32/libraries/templates/stm32l1xx/board/CubeMX_Config/Src/stm32l1xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32l1xx/board/CubeMX_Config/Src/stm32l1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -138,12 +138,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -174,11 +174,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -205,11 +205,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -232,11 +232,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -270,10 +270,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -290,10 +290,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/CubeMX_Config.ioc
index 7cc72b8dbf..63350ae9c7 100644
--- a/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/CubeMX_Config.ioc
@@ -33,14 +33,18 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13\ (JTMS-SWDIO).Mode=Serial_Wire
 PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
 PA14\ (JTCK-SWCLK).Mode=Serial_Wire
 PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PCC.Checker=true
 PCC.Line=STM32L4x5
 PCC.MCU=STM32L475V(C-E-G)Tx
diff --git a/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index c973d3d2c1..656979eb4d 100644
--- a/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32l4xx/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,15 +114,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -154,10 +154,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index efb81996fa..1fe94b4913 100644
--- a/bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32mp1xx/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32mp1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -33,7 +33,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -59,7 +59,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -77,11 +77,11 @@ void HAL_MspInit(void)
   /* USER CODE BEGIN MspInit 1 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-#if defined(BSP_USING_ADC) || defined(BSP_USING_DAC)      
+#if defined(BSP_USING_ADC) || defined(BSP_USING_DAC)
     /* Configure PMIC */
     BSP_PMIC_Init();
     BSP_PMIC_InitRegulators();
-    
+
     __HAL_RCC_VREF_CLK_ENABLE();
     HAL_SYSCFG_VREFBUF_HighImpedanceConfig(SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE);
     HAL_SYSCFG_EnableVREFBUF();
@@ -107,7 +107,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
     PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PER;
@@ -120,10 +120,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     /* Peripheral clock enable */
     __HAL_RCC_ADC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -150,9 +150,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC12_CLK_DISABLE();
-  
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_14);
 
@@ -179,10 +179,10 @@ void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DAC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -210,9 +210,9 @@ void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DAC12_CLK_DISABLE();
-  
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
 
@@ -292,7 +292,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
   /* USER CODE END LPTIM1_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
     PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK1;
@@ -320,7 +320,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -348,7 +348,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -376,7 +376,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -404,7 +404,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -525,7 +525,7 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SPI45;
     PeriphClkInit.Spi45ClockSelection = RCC_SPI45CLKSOURCE_PCLK2;
@@ -538,11 +538,11 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
 
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF9     ------> SPI5_MOSI
-    PF7     ------> SPI5_SCK 
+    PF7     ------> SPI5_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -573,10 +573,10 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF9     ------> SPI5_MOSI
-    PF7     ------> SPI5_SCK 
+    PF7     ------> SPI5_SCK
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_9|GPIO_PIN_7);
 
@@ -650,10 +650,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM4_MspPostInit 0 */
 
   /* USER CODE END TIM4_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
-    PD13     ------> TIM4_CH2 
+    /**TIM4 GPIO Configuration
+    PD13     ------> TIM4_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -740,7 +740,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART24;
     PeriphClkInit.Uart24ClockSelection = RCC_UART24CLKSOURCE_HSI;
@@ -753,23 +753,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = STLINK_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF6_UART4;
     HAL_GPIO_Init(STLINK_RX_GPIO_Port, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = STLINK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(STLINK_TX_GPIO_Port, &GPIO_InitStruct);
 
@@ -785,7 +785,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART35;
     PeriphClkInit.Uart35ClockSelection = RCC_UART35CLKSOURCE_PCLK1;
@@ -798,22 +798,22 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
@@ -839,10 +839,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     HAL_GPIO_DeInit(STLINK_RX_GPIO_Port, STLINK_RX_Pin);
 
@@ -859,10 +859,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_12);
 
@@ -908,12 +908,12 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
     RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         if(IS_ENGINEERING_BOOT_MODE())
         {
-             /*** Configure the I2C peripheral clock ***/ 
+             /*** Configure the I2C peripheral clock ***/
             PeriphClkInit.I2c46ClockSelection = RCC_I2C46CLKSOURCE_HSI;
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C46;
             if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -935,11 +935,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 
         /* Enable I2C clock */
         __HAL_RCC_I2C4_CLK_ENABLE();
-        /* Force the I2C peripheral clock reset */  
+        /* Force the I2C peripheral clock reset */
         __HAL_RCC_I2C4_FORCE_RESET();
-        /* Release the I2C peripheral clock reset */  
+        /* Release the I2C peripheral clock reset */
         __HAL_RCC_I2C4_RELEASE_RESET();
-        
+
         HAL_NVIC_SetPriority(I2C4_ER_IRQn, 0, 1);
         HAL_NVIC_EnableIRQ(I2C4_ER_IRQn);
         HAL_NVIC_SetPriority(I2C4_EV_IRQn, 0, 2);
@@ -955,7 +955,7 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         /* Configure I2C Tx, Rx as alternate function */
diff --git a/bsp/stm32/libraries/templates/stm32wbxx/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c b/bsp/stm32/libraries/templates/stm32wbxx/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
index 9e31cfedd8..98fd3fc9a5 100644
--- a/bsp/stm32/libraries/templates/stm32wbxx/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
+++ b/bsp/stm32/libraries/templates/stm32wbxx/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
@@ -98,7 +98,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
diff --git a/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index e62fa13da5..1009ded5e2 100644
--- a/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -44,7 +44,7 @@ PA14.Signal=SYS_SWCLK
 PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA2.GPIO_Label=USART_TX
 PA2.GPIO_Mode=GPIO_MODE_AF_PP
-PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA2.Locked=true
 PA2.Mode=Asynchronous
@@ -52,7 +52,7 @@ PA2.Signal=USART2_TX
 PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA3.GPIO_Label=USART_RX
 PA3.GPIO_Mode=GPIO_MODE_AF_PP
-PA3.GPIO_PuPd=GPIO_NOPULL
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA3.Locked=true
 PA3.Mode=Asynchronous
diff --git a/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c b/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
index 907465857b..7fd27fea17 100644
--- a/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
+++ b/bsp/stm32/stm32f072-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,15 +113,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -148,10 +148,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
 
diff --git a/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 75eb3b8646..d1e0132661 100644
--- a/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -37,9 +37,9 @@ Mcu.Pin4=PA3
 Mcu.Pin5=PA6
 Mcu.Pin6=PA7
 Mcu.Pin7=PB11
-Mcu.Pin8=PA8
-Mcu.Pin9=PA9
-Mcu.PinsNb=21
+Mcu.Pin8=PA9
+Mcu.Pin9=PA10
+Mcu.PinsNb=20
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F091RCTx
@@ -52,23 +52,29 @@ NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 PA0.Mode=IN0
 PA0.Signal=ADC_IN0
-PA10.Mode=Synchronous
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
-PA8.Mode=Synchronous
-PA8.Signal=USART1_CK
-PA9.Mode=Synchronous
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
 PB11.Signal=S_TIM2_CH4
 PB3.Locked=true
@@ -147,8 +153,8 @@ SPI1.Mode=SPI_MODE_MASTER
 SPI1.VirtualType=VM_MASTER
 TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
 TIM2.IPParameters=Channel-PWM Generation4 CH4
-USART1.IPParameters=VirtualMode-Synchronous
-USART1.VirtualMode-Synchronous=VM_SYNC
+USART1.IPParameters=VirtualMode-Asynchronous
+USART1.VirtualMode-Asynchronous=VM_ASYNC
 USART2.IPParameters=VirtualMode-Asynchronous
 USART2.VirtualMode-Asynchronous=VM_ASYNC
 VP_IWDG_VS_IWDG.Mode=IWDG_Activate
diff --git a/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c b/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
index 112b9931e2..700fcc0dfd 100644
--- a/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
+++ b/bsp/stm32/stm32f091-st-nucleo/board/CubeMX_Config/Src/stm32f0xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -115,10 +115,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC GPIO Configuration    
-    PA0     ------> ADC_IN0 
+    /**ADC GPIO Configuration
+    PA0     ------> ADC_IN0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -147,9 +147,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC GPIO Configuration    
-    PA0     ------> ADC_IN0 
+
+    /**ADC GPIO Configuration
+    PA0     ------> ADC_IN0
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);
 
@@ -220,13 +220,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PA7     ------> SPI1_MOSI
-    PB3     ------> SPI1_SCK 
+    PB3     ------> SPI1_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -264,11 +264,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PA7     ------> SPI1_MOSI
-    PB3     ------> SPI1_SCK 
+    PB3     ------> SPI1_SCK
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_7);
 
@@ -344,10 +344,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM2_MspPostInit 0 */
 
   /* USER CODE END TIM2_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PB11     ------> TIM2_CH4 
+    /**TIM2 GPIO Configuration
+    PB11     ------> TIM2_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -418,31 +418,30 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
 }
 
 /**
-* @brief USART MSP Initialization
+* @brief UART MSP Initialization
 * This function configures the hardware resources used in this example
-* @param husart: USART handle pointer
+* @param huart: UART handle pointer
 * @retval None
 */
-void HAL_USART_MspInit(USART_HandleTypeDef* husart)
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 {
   GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(husart->Instance==USART1)
+  if(huart->Instance==USART1)
   {
   /* USER CODE BEGIN USART1_MspInit 0 */
 
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
-    PA8     ------> USART1_CK
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10;
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -451,34 +450,22 @@ void HAL_USART_MspInit(USART_HandleTypeDef* husart)
 
   /* USER CODE END USART1_MspInit 1 */
   }
-
-}
-
-/**
-* @brief UART MSP Initialization
-* This function configures the hardware resources used in this example
-* @param huart: UART handle pointer
-* @retval None
-*/
-void HAL_UART_MspInit(UART_HandleTypeDef* huart)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(huart->Instance==USART2)
+  else if(huart->Instance==USART2)
   {
   /* USER CODE BEGIN USART2_MspInit 0 */
 
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -491,54 +478,42 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 }
 
 /**
-* @brief USART MSP De-Initialization
+* @brief UART MSP De-Initialization
 * This function freeze the hardware resources used in this example
-* @param husart: USART handle pointer
+* @param huart: UART handle pointer
 * @retval None
 */
-void HAL_USART_MspDeInit(USART_HandleTypeDef* husart)
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
 {
-  if(husart->Instance==USART1)
+  if(huart->Instance==USART1)
   {
   /* USER CODE BEGIN USART1_MspDeInit 0 */
 
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
-    PA8     ------> USART1_CK
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10);
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
   /* USER CODE BEGIN USART1_MspDeInit 1 */
 
   /* USER CODE END USART1_MspDeInit 1 */
   }
-
-}
-
-/**
-* @brief UART MSP De-Initialization
-* This function freeze the hardware resources used in this example
-* @param huart: UART handle pointer
-* @retval None
-*/
-void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
-{
-  if(huart->Instance==USART2)
+  else if(huart->Instance==USART2)
   {
   /* USER CODE BEGIN USART2_MspDeInit 0 */
 
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index a38a7f26b1..e113c72475 100644
--- a/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-atk-nano/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -94,7 +94,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -120,10 +120,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -153,9 +153,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);
 
@@ -233,12 +233,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -274,11 +274,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -343,11 +343,11 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PC6     ------> TIM3_CH1
-    PC7     ------> TIM3_CH2 
+    PC7     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -424,11 +424,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -437,7 +437,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
     /* USART1 interrupt Init */
@@ -465,10 +465,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/CubeMX_Config.ioc
index ab50887fd8..80c986136d 100644
--- a/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/CubeMX_Config.ioc
@@ -95,12 +95,16 @@ OSC_IN.Mode=HSE-External-Oscillator
 OSC_IN.Signal=RCC_OSC_IN
 OSC_OUT.Mode=HSE-External-Oscillator
 OSC_OUT.Signal=RCC_OSC_OUT
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
 PC10.Mode=SD_4_bits_Wide_bus
@@ -121,14 +125,6 @@ PC8.Mode=SD_4_bits_Wide_bus
 PC8.Signal=SDIO_D0
 PC9.Mode=SD_4_bits_Wide_bus
 PC9.Signal=SDIO_D1
-PCC.Checker=false
-PCC.Line=STM32F103
-PCC.MCU=STM32F103Z(C-D-E)Tx
-PCC.PartNumber=STM32F103ZETx
-PCC.Seq0=0
-PCC.Series=STM32F1
-PCC.Temperature=25
-PCC.Vdd=3.3
 PD0.Signal=FSMC_D2_DA2
 PD1.Signal=FSMC_D3_DA3
 PD10.Signal=FSMC_D15_DA15
@@ -184,7 +180,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103ZETx
-ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.0
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.4
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -197,11 +193,12 @@ ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=CubeMX_Config.ioc
 ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_FSMC_Init-FSMC-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_FSMC_Init-FSMC-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_SDIO_SD_Init-SDIO-false-HAL-true
 RCC.ADCFreqValue=36000000
 RCC.AHBFreq_Value=72000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV2
diff --git a/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 5a7f5eedf6..f852a2c104 100644
--- a/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-atk-warshipv3/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -72,7 +72,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -97,18 +97,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -141,16 +141,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -178,11 +178,11 @@ void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* htim_encoder)
   /* USER CODE END TIM3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_TIM3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PC6     ------> TIM3_CH1
-    PC7     ------> TIM3_CH2 
+    PC7     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -213,10 +213,10 @@ void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* htim_encoder)
   /* USER CODE END TIM3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_TIM3_CLK_DISABLE();
-  
-    /**TIM3 GPIO Configuration    
+
+    /**TIM3 GPIO Configuration
     PC6     ------> TIM3_CH1
-    PC7     ------> TIM3_CH2 
+    PC7     ------> TIM3_CH2
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
 
@@ -243,11 +243,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -256,7 +256,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -281,10 +281,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -294,73 +294,6 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   }
 
 }
-/**
-* @brief CAN MSP Initialization
-* This function configures the hardware resources used in this example
-* @param hcan: CAN handle pointer
-* @retval None
-*/
-void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(hcan->Instance==CAN1)
-  {
-  /* USER CODE BEGIN CAN1_MspInit 0 */
-
-  /* USER CODE END CAN1_MspInit 0 */
-    /* Peripheral clock enable */
-    __HAL_RCC_CAN1_CLK_ENABLE();
-  
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**CAN GPIO Configuration    
-    PA11     ------> CAN_RX
-    PA12     ------> CAN_TX 
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_11;
-    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = GPIO_PIN_12;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN CAN1_MspInit 1 */
-
-  /* USER CODE END CAN1_MspInit 1 */
-  }
-
-}
-/**
-* @brief CAN MSP De-Initialization
-* This function freeze the hardware resources used in this example
-* @param hcan: CAN handle pointer
-* @retval None
-*/
-void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
-{
-  if(hcan->Instance==CAN1)
-  {
-  /* USER CODE BEGIN CAN1_MspDeInit 0 */
-
-  /* USER CODE END CAN1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_CAN1_CLK_DISABLE();
-  
-    /**CAN GPIO Configuration    
-    PA11     ------> CAN_RX
-    PA12     ------> CAN_TX 
-    */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
-
-  /* USER CODE BEGIN CAN1_MspDeInit 1 */
-
-  /* USER CODE END CAN1_MspDeInit 1 */
-  }
-
-}
-
 
 static uint32_t FSMC_Initialized = 0;
 
@@ -376,8 +309,8 @@ static void HAL_FSMC_MspInit(void){
 
   /* Peripheral clock enable */
   __HAL_RCC_FSMC_CLK_ENABLE();
-  
-  /** FSMC GPIO Configuration  
+
+  /** FSMC GPIO Configuration
   PF0   ------> FSMC_A0
   PF1   ------> FSMC_A1
   PF2   ------> FSMC_A2
@@ -419,28 +352,28 @@ static void HAL_FSMC_MspInit(void){
   PE0   ------> FSMC_NBL0
   PE1   ------> FSMC_NBL1
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13
                           |GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                           |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_10;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
-                          |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+                          |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
                           |GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -473,8 +406,8 @@ static void HAL_FSMC_MspDeInit(void){
   FSMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FSMC_CLK_DISABLE();
-  
-  /** FSMC GPIO Configuration  
+
+  /** FSMC GPIO Configuration
   PF0   ------> FSMC_A0
   PF1   ------> FSMC_A1
   PF2   ------> FSMC_A2
@@ -516,19 +449,19 @@ static void HAL_FSMC_MspDeInit(void){
   PE0   ------> FSMC_NBL0
   PE1   ------> FSMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13
                           |GPIO_PIN_14|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                           |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_10);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
-                          |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+                          |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
                           |GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
   /* USER CODE BEGIN FSMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f103-blue-pill/README.md b/bsp/stm32/stm32f103-blue-pill/README.md
index 8911c66fc1..e7627e64a1 100644
--- a/bsp/stm32/stm32f103-blue-pill/README.md
+++ b/bsp/stm32/stm32f103-blue-pill/README.md
@@ -238,6 +238,12 @@ Each peripheral supporting condition for this BSP is as follows:
 
 
 
+### 3.9 How to create RT-Studio Project
+
+- [RT-Thread RTOS Tutorial #3 | Advanced Skills - YouTube](https://www.youtube.com/watch?v=k4-ArvvIiR8)
+
+
+
 ## 4 **Advanced Features**
 
 This BSP only enables GPIO and USART1 by default. If you need more advanced features such as SPI, ADC, or to add software packages, you need to configure the BSP with RT-Thread [ENV tool](https://www.rt-thread.io/download.html?download=Env), as follows:
@@ -292,7 +298,7 @@ Re-plug the USB cable and you will find a new serial (virtual com, 115200, 8-N-1
 
 ### 4.2 How to extend Blue Pill board’s Flash space
 
-According to ST official datasheet, STM32F103C8 has 64KB of Flash. However, STM32F103C8 and STM32F103CB use the same type of silicon die, which means STM32F103C8 also has 128KB ROM in theory, but ST locked the high 64KB. Basically, to force the debugger to download program can unlock the high 64KB. There is a good news that **Keil5 will help you to unlock the Blue Pill Board high 64KB block** if you use Blue Pill Board BSP as a template to create your project. You just need to press the "Flash Download" button as usual. What you only need to remember is that Blue Pill board has 128KB of Flash rather than 64KB.
+According to ST official datasheet, STM32F103C8 has 64KB of Flash. However, STM32F103C8 and STM32F103CB use the same type of silicon die, which means STM32F103C8 also has 128KB ROM in theory, but ST locked the high 64KB. Basically, to force the debugger to download program can unlock the high 64KB. There is a good news that **Keil5 / IAR / RT-Studio will help you to unlock the Blue Pill Board high 64KB block** if you use this Blue Pill Board BSP as a template to create your project. You just need to press the "Flash Download" button as usual. What you only need to remember is that Blue Pill board has 128KB of Flash rather than 64KB.
 
 
 
@@ -309,8 +315,7 @@ According to ST official datasheet, STM32F103C8 has 64KB of Flash. However, STM3
 
 ## 6 Maintained By
 
-Meco Man @ RT-Thread Community
+[Meco Man](https://github.com/mysterywolf) @ RT-Thread Community
 
 [email protected] 
 
-https://github.com/mysterywolf
diff --git a/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc
index d9aadc3758..f3db8820e8 100644
--- a/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc
@@ -57,6 +57,8 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Signal=ADCx_IN1
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Device
@@ -67,8 +69,12 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA5.Mode=Full_Duplex_Master
@@ -77,6 +83,8 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
 PC13-TAMPER-RTC.GPIOParameters=GPIO_Speed,PinState,GPIO_ModeDefaultOutputPP
@@ -103,7 +111,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103C8Tx
-ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.3
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.8.4
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
diff --git a/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index d48771f71d..a6d94ecced 100644
--- a/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -287,7 +287,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -314,7 +314,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART2_MspInit 1 */
diff --git a/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/CubeMX_Config.ioc
index e897be5421..80ad293e6c 100644
--- a/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/CubeMX_Config.ioc
@@ -57,6 +57,12 @@ OSC_IN.Mode=HSE-External-Oscillator
 OSC_IN.Signal=RCC_OSC_IN
 OSC_OUT.Mode=HSE-External-Oscillator
 OSC_OUT.Signal=RCC_OSC_OUT
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
@@ -69,8 +75,6 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB13.Mode=Full_Duplex_Master
 PB13.Signal=SPI2_SCK
 PB14.Mode=Full_Duplex_Master
diff --git a/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 1efbf77d5e..e076325291 100644
--- a/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-dofly-M3S/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -72,7 +72,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -97,18 +97,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -141,16 +141,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -178,12 +178,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -206,12 +206,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -234,12 +234,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI3 GPIO Configuration    
+    /**SPI3 GPIO Configuration
     PB3     ------> SPI3_SCK
     PB4     ------> SPI3_MISO
-    PB5     ------> SPI3_MOSI 
+    PB5     ------> SPI3_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -273,11 +273,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -292,11 +292,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -311,11 +311,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI3_CLK_DISABLE();
-  
-    /**SPI3 GPIO Configuration    
+
+    /**SPI3 GPIO Configuration
     PB3     ------> SPI3_SCK
     PB4     ------> SPI3_MISO
-    PB5     ------> SPI3_MOSI 
+    PB5     ------> SPI3_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -342,11 +342,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -355,7 +355,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -380,10 +380,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/CubeMX_Config.ioc
index e2768b2045..fcd3cd934e 100644
--- a/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/CubeMX_Config.ioc
@@ -34,14 +34,18 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index b22009fcdb..87bfedec78 100644
--- a/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-dofly-lyc8/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,7 +92,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -118,11 +118,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -131,7 +131,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -158,10 +158,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index c27983df23..1f33ad7e90 100644
--- a/bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-fire-arbitrary/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -94,7 +94,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -119,10 +119,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PC1     ------> ADC1_IN11 
+    /**ADC1 GPIO Configuration
+    PC1     ------> ADC1_IN11
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -150,9 +150,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PC1     ------> ADC1_IN11 
+
+    /**ADC1 GPIO Configuration
+    PC1     ------> ADC1_IN11
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1);
 
@@ -179,11 +179,11 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
   /* USER CODE END CAN1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_CAN1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**CAN GPIO Configuration    
+    /**CAN GPIO Configuration
     PB8     ------> CAN_RX
-    PB9     ------> CAN_TX 
+    PB9     ------> CAN_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -219,10 +219,10 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
   /* USER CODE END CAN1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_CAN1_CLK_DISABLE();
-  
-    /**CAN GPIO Configuration    
+
+    /**CAN GPIO Configuration
     PB8     ------> CAN_RX
-    PB9     ------> CAN_TX 
+    PB9     ------> CAN_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
 
@@ -296,18 +296,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -340,16 +340,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -377,12 +377,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -405,12 +405,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -444,11 +444,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -463,11 +463,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -541,12 +541,12 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PB0     ------> TIM3_CH3
     PB1     ------> TIM3_CH4
-    PB5     ------> TIM3_CH2 
+    PB5     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -632,11 +632,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -645,7 +645,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
     /* USART1 interrupt Init */
@@ -662,11 +662,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -675,7 +675,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART2_MspInit 1 */
@@ -689,11 +689,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -702,7 +702,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART3_MspInit 1 */
@@ -727,10 +727,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -747,10 +747,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -765,10 +765,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
diff --git a/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/CubeMX_Config.ioc
index 360fb08070..54b134346f 100644
--- a/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/CubeMX_Config.ioc
@@ -34,6 +34,10 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
 PA10.GPIOParameters=GPIO_PuPd
 PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
@@ -42,8 +46,6 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 12171ceb42..3ee3a6eac5 100644
--- a/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-gizwits-gokitv21/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -72,7 +72,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -97,11 +97,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -117,7 +117,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
   /* USER CODE END USART1_MspInit 1 */
   }
-  
+
   if(huart->Instance==USART2)
   {
   /* USER CODE BEGIN USART2_MspInit 0 */
@@ -125,11 +125,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -163,10 +163,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -181,10 +181,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/CubeMX_Config.ioc
index 64b78b0f82..7f72f094c7 100644
--- a/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/CubeMX_Config.ioc
@@ -68,14 +68,24 @@ OSC_IN.Mode=HSE-External-Oscillator
 OSC_IN.Signal=RCC_OSC_IN
 OSC_OUT.Mode=HSE-External-Oscillator
 OSC_OUT.Signal=RCC_OSC_OUT
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA5.Mode=Full_Duplex_Master
@@ -84,10 +94,12 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PB13.Mode=Full_Duplex_Master
diff --git a/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index a70b36e9dc..18d600fd55 100644
--- a/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-hw100k-ibox/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,7 +92,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -118,11 +118,11 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
+    /**ADC1 GPIO Configuration
     PC0     ------> ADC1_IN10
-    PC1     ------> ADC1_IN11 
+    PC1     ------> ADC1_IN11
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -152,10 +152,10 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
+
+    /**ADC1 GPIO Configuration
     PC0     ------> ADC1_IN10
-    PC1     ------> ADC1_IN11 
+    PC1     ------> ADC1_IN11
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_1);
 
@@ -233,12 +233,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -261,12 +261,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -302,11 +302,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -321,11 +321,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -353,11 +353,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -366,7 +366,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
   /* USER CODE BEGIN UART4_MspInit 1 */
@@ -380,11 +380,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -393,7 +393,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -407,11 +407,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -420,7 +420,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART2_MspInit 1 */
@@ -434,11 +434,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -447,7 +447,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART3_MspInit 1 */
@@ -474,10 +474,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -492,10 +492,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -510,10 +510,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -528,10 +528,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
diff --git a/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/CubeMX_Config.ioc
index bea3e97feb..aa311f47f2 100644
--- a/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/CubeMX_Config.ioc
@@ -43,34 +43,42 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA2.Locked=true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
-PA3.Locked=true
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
-PB10.Locked=true
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
-PB11.Locked=true
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
-PC10.Locked=true
+PC10.GPIOParameters=GPIO_PuPd
+PC10.GPIO_PuPd=GPIO_PULLUP
 PC10.Mode=Asynchronous
-PC10.Signal=UART4_TX
-PC11.Locked=true
+PC10.Signal=USART4_TX
+PC11.GPIOParameters=GPIO_PuPd
+PC11.GPIO_PuPd=GPIO_PULLUP
 PC11.Mode=Asynchronous
-PC11.Signal=UART4_RX
+PC11.Signal=USART4_RX
 PD0-OSC_IN.Locked=true
 PD0-OSC_IN.Mode=HSE-External-Oscillator
 PD0-OSC_IN.Signal=RCC_OSC_IN
diff --git a/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index d2471dd6da..e35fce1d80 100644
--- a/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-onenet-nbiot/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -72,7 +72,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -97,11 +97,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -110,7 +110,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
   /* USER CODE BEGIN UART4_MspInit 1 */
@@ -124,11 +124,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -137,7 +137,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -151,11 +151,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -164,7 +164,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART2_MspInit 1 */
@@ -178,11 +178,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -191,7 +191,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART3_MspInit 1 */
@@ -216,10 +216,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -234,10 +234,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -252,10 +252,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -270,10 +270,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
diff --git a/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/CubeMX_Config.ioc
index 8f0ebe34a9..7a1bec1345 100644
--- a/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/CubeMX_Config.ioc
@@ -47,6 +47,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA0-WKUP.Signal=S_TIM2_CH1_ETR
 PA1.Signal=S_TIM2_CH2
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
@@ -54,8 +60,6 @@ PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
 PA2.Signal=S_TIM2_CH3
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PC10.Mode=SD_4_bits_Wide_bus
 PC10.Signal=SDIO_D2
 PC11.Mode=SD_4_bits_Wide_bus
diff --git a/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 67d2da43eb..6d50c1c47d 100644
--- a/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f103-yf-ufun/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -94,7 +94,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -119,18 +119,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
@@ -163,16 +163,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -214,12 +214,12 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM2_MspPostInit 0 */
 
   /* USER CODE END TIM2_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
+    /**TIM2 GPIO Configuration
     PA0-WKUP     ------> TIM2_CH1
     PA1     ------> TIM2_CH2
-    PA2     ------> TIM2_CH3 
+    PA2     ------> TIM2_CH3
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -269,11 +269,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -282,7 +282,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /* USER CODE BEGIN USART1_MspInit 1 */
@@ -305,10 +305,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32f107-uc-eval/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f107-uc-eval/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
index 03106e9008..6df0958bbd 100644
--- a/bsp/stm32/stm32f107-uc-eval/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
+++ b/bsp/stm32/stm32f107-uc-eval/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,7 +92,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled 
+  /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   */
   __HAL_AFIO_REMAP_SWJ_NOJTAG();
 
@@ -118,11 +118,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -131,7 +131,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     GPIO_InitStruct.Pin = GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
     __HAL_AFIO_REMAP_USART2_ENABLE();
@@ -163,10 +163,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
 
diff --git a/bsp/stm32/stm32f207-st-nucleo/board/CubeMX_Config/Core/Src/stm32f2xx_hal_msp.c b/bsp/stm32/stm32f207-st-nucleo/board/CubeMX_Config/Core/Src/stm32f2xx_hal_msp.c
index 24b027c37b..a4a60ffeb9 100644
--- a/bsp/stm32/stm32f207-st-nucleo/board/CubeMX_Config/Core/Src/stm32f2xx_hal_msp.c
+++ b/bsp/stm32/stm32f207-st-nucleo/board/CubeMX_Config/Core/Src/stm32f2xx_hal_msp.c
@@ -101,7 +101,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
diff --git a/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index e04e99534f..171ed0f617 100644
--- a/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -42,11 +42,13 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA2.GPIOParameters=GPIO_Speed
+PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
-PA3.GPIOParameters=GPIO_Speed
+PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
@@ -61,14 +63,6 @@ PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
 PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
-PCC.Checker=false
-PCC.Line=STM32F401
-PCC.MCU=STM32F401R(D-E)Tx
-PCC.PartNumber=STM32F401RETx
-PCC.Seq0=0
-PCC.Series=STM32F4
-PCC.Temperature=25
-PCC.Vdd=null
 PH0\ -\ OSC_IN.Mode=HSE-External-Clock-Source
 PH0\ -\ OSC_IN.Signal=RCC_OSC_IN
 PH1\ -\ OSC_OUT.Mode=HSE-External-Clock-Source
diff --git a/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 62e369862b..b263fd4998 100644
--- a/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f401-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,12 +113,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -149,11 +149,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -180,11 +180,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -215,10 +215,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/CubeMX_Config.ioc
index b4aeaf68c1..8ae3a1bccd 100644
--- a/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/CubeMX_Config.ioc
@@ -32,8 +32,12 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 0b13484aba..ecc0b6d703 100644
--- a/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f405-smdz-breadfruit/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,11 +114,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -151,10 +151,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f407-armfly-v5/.config b/bsp/stm32/stm32f407-armfly-v5/.config
new file mode 100644
index 0000000000..13a4d62a3a
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/.config
@@ -0,0 +1,351 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=1000
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+# CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_VER_NUM=0x40000
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M4=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_SERIAL_USING_DMA=y
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_MTD is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+
+#
+# Using WiFi
+#
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+# CONFIG_RT_USING_LIBC is not set
+# CONFIG_RT_USING_PTHREADS is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# Modbus master and slave stack
+#
+# CONFIG_RT_USING_MODBUS is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_LOGTRACE is not set
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+
+#
+# ARM CMSIS
+#
+# CONFIG_RT_USING_CMSIS_OS is not set
+# CONFIG_RT_USING_RTT_CMSIS is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_AHT10 is not set
+# CONFIG_PKG_USING_AP3216C is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_MPU6XXX is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+CONFIG_SOC_FAMILY_STM32=y
+CONFIG_SOC_SERIES_STM32F4=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_STM32F407ZG=y
+
+#
+# Onboard Peripheral Drivers
+#
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART1=y
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_I2C1 is not set
+
+#
+# Board extended module Drivers
+#
diff --git a/bsp/stm32/stm32f407-armfly-v5/.gitignore b/bsp/stm32/stm32f407-armfly-v5/.gitignore
new file mode 100644
index 0000000000..7221bde019
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/.gitignore
@@ -0,0 +1,42 @@
+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h
diff --git a/bsp/stm32/stm32f407-armfly-v5/Kconfig b/bsp/stm32/stm32f407-armfly-v5/Kconfig
new file mode 100644
index 0000000000..8cbc7b71a8
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/Kconfig
@@ -0,0 +1,21 @@
+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+ 
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"
diff --git a/bsp/stm32/stm32f407-armfly-v5/README.md b/bsp/stm32/stm32f407-armfly-v5/README.md
new file mode 100644
index 0000000000..4f2f74f36b
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/README.md
@@ -0,0 +1,125 @@
+# STM32F429 armfly-v5 开发板 BSP 说明
+
+## 简介
+
+本文档为 STM32F429 armfly-v5 开发板的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+armfly-v5 STM32F407 是安富莱推出的一款基于 ARM Cortex-M4 内核的开发板，最高主频为 168Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F407 的芯片性能。
+
+开发板外观如下图所示：
+
+![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下：
+
+- MCU：STM32F407IGT6，主频 168MHz，1024KB FLASH ，196KB RAM
+- 外部 RAM：IS61WV102416BLL-10TL（SRAM，20MB，16bit）
+- 外部 FLASH：W25Q64BVSSIG（SPI，8MB）、HY27UF081G2A（NAND，128MB）
+- 常用外设
+  - LED：4个， LED1 - LED4
+  - 按键：4个，k1（PI8），K2（PC13），k3（PI11），五向摇杆
+- 常用接口：USB 转串口、SD 卡接口、以太网接口、LCD 接口
+- 调试接口，SWD
+
+开发板更多详细信息请参考【安富莱】 [STM32 v5开发板介绍](http://www.armbbs.cn/forum.php?mod=viewthread&tid=1285)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设**      | **支持情况** | **备注**                              |
+| :----------------- | :----------: | :------------------------------------- |
+| USB 转串口        |     支持     | UART1/2 |
+| SPI Flash         |     支持     | W25Q64BVSSIG 8M FLASH  SPI3 |
+| MPU6050 |     支持     | 软件 I2C2 |
+| SD卡              |   支持   |                                       |
+| CAN               | 暂不支持 |                                            |
+| **片上外设**      | **支持情况** | **备注**                              |
+| GPIO              |     支持     | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
+| UART              |     支持     | UART1                             |
+| SPI               |     支持     | SPI3                              |
+| I2C               |     支持     | 软件 I2C2                             |
+| ADC               |     支持     |                                     |
+| RTC               |     支持     | 支持外部晶振和内部低速时钟 |
+| WDT               |     支持     |                                       |
+| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) |
+| SDIO              |   支持   |                               |
+| PWM               |   支持   |                               |
+| USB Device        |   暂不支持   | 即将支持                              |
+| USB Host          |   暂不支持   | 即将支持                              |
+| **扩展模块**      | **支持情况** | **备注**                              |
+|    ad7606 |   暂不支持   |                                      |
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 STLink 仿真器下载程序，在通过 STLink 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，【这里写开发板运行起来之后的现象，如：LED 闪烁等】。
+
+连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.2 build Jul 13 2020
+ 2006 - 2019 Copyright by rt-thread team
+msh >
+```
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+
+1. 在 bsp 下打开 env 工具。
+
+2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
+
+3. 输入`pkgs --update`命令更新软件包。
+
+4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
+
+## 注意事项
+
+- 暂无
+
+## 联系人信息
+
+维护人:
+
+-  [Dozingfiretruck](https://gitee.com/Dozingfiretruck), 邮箱：<[email protected]>
\ No newline at end of file
diff --git a/bsp/stm32/stm32f407-armfly-v5/SConscript b/bsp/stm32/stm32f407-armfly-v5/SConscript
new file mode 100644
index 0000000000..20f7689c53
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/SConscript
@@ -0,0 +1,15 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')
diff --git a/bsp/stm32/stm32f407-armfly-v5/SConstruct b/bsp/stm32/stm32f407-armfly-v5/SConstruct
new file mode 100644
index 0000000000..945cb55a52
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/SConstruct
@@ -0,0 +1,60 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+stm32_library = 'STM32F4xx_HAL'
+rtconfig.BSP_LIBRARY_TYPE = stm32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)
diff --git a/bsp/stm32/stm32f407-armfly-v5/applications/SConscript b/bsp/stm32/stm32f407-armfly-v5/applications/SConscript
new file mode 100644
index 0000000000..6f66f7ab73
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/applications/SConscript
@@ -0,0 +1,12 @@
+import rtconfig
+from building import *
+
+cwd     = GetCurrentDir()
+CPPPATH = [cwd, str(Dir('#'))]
+src     = Split("""
+main.c
+""")
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/stm32/stm32f407-armfly-v5/applications/main.c b/bsp/stm32/stm32f407-armfly-v5/applications/main.c
new file mode 100644
index 0000000000..297573866c
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/applications/main.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LED4 pin: PC2 */
+#define LED0_PIN    GET_PIN(C, 2)
+
+int main(void)
+{
+    int count = 1;
+    /* set LED0 pin mode to output */
+    rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
+
+    while (count++)
+    {
+        rt_pin_write(LED0_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);
+        rt_pin_write(LED0_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+
+    return RT_EOK;
+}
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/.mxproject
new file mode 100644
index 0000000000..4638fb8888
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/.mxproject
@@ -0,0 +1,19 @@
+[PreviousGenFiles]
+HeaderPath=C:/Users/qq147/Desktop/rt-thread/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc
+HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;
+SourcePath=C:/Users/qq147/Desktop/rt-thread/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src
+SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;
+
+[PreviousLibFiles]
+LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
+
+[PreviousUsedIarFiles]
+SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\\Src/system_stm32f4xx.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\\Src/system_stm32f4xx.c;..\Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;;
+HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc;
+CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
+[PreviousUsedKeilFiles]
+SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\\Src/system_stm32f4xx.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\\Src/system_stm32f4xx.c;..\Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;;
+HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc;
+CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/CubeMX_Config.ioc
new file mode 100644
index 0000000000..6821275340
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/CubeMX_Config.ioc
@@ -0,0 +1,242 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-3\#ChannelRegularConversion=ADC_CHANNEL_9
+ADC1.IPParameters=Rank-3\#ChannelRegularConversion,master,Channel-3\#ChannelRegularConversion,SamplingTime-3\#ChannelRegularConversion,NbrOfConversionFlag
+ADC1.NbrOfConversionFlag=1
+ADC1.Rank-3\#ChannelRegularConversion=1
+ADC1.SamplingTime-3\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
+ADC1.master=1
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+I2S2.ErrorAudioFreq=-0.27 %
+I2S2.FullDuplexMode=I2S_FULLDUPLEXMODE_ENABLE
+I2S2.IPParameters=Instance,VirtualMode,FullDuplexMode,RealAudioFreq,ErrorAudioFreq
+I2S2.Instance=SPI$Index
+I2S2.RealAudioFreq=7.978 KHz
+I2S2.VirtualMode=I2S_MODE_MASTER
+KeepUserPlacement=false
+Mcu.Family=STM32F4
+Mcu.IP0=ADC1
+Mcu.IP1=I2S2
+Mcu.IP10=TIM10
+Mcu.IP11=TIM11
+Mcu.IP12=TIM13
+Mcu.IP13=TIM14
+Mcu.IP14=USART1
+Mcu.IP15=USART2
+Mcu.IP2=IWDG
+Mcu.IP3=NVIC
+Mcu.IP4=RCC
+Mcu.IP5=RNG
+Mcu.IP6=RTC
+Mcu.IP7=SDIO
+Mcu.IP8=SPI3
+Mcu.IP9=SYS
+Mcu.IPNb=16
+Mcu.Name=STM32F407I(E-G)Tx
+Mcu.Package=LQFP176
+Mcu.Pin0=PC14-OSC32_IN
+Mcu.Pin1=PC15-OSC32_OUT
+Mcu.Pin10=PB15
+Mcu.Pin11=PC6
+Mcu.Pin12=PC8
+Mcu.Pin13=PC9
+Mcu.Pin14=PA9
+Mcu.Pin15=PA10
+Mcu.Pin16=PA13
+Mcu.Pin17=PI2
+Mcu.Pin18=PA14
+Mcu.Pin19=PC10
+Mcu.Pin2=PF6
+Mcu.Pin20=PC11
+Mcu.Pin21=PC12
+Mcu.Pin22=PD2
+Mcu.Pin23=PB3
+Mcu.Pin24=PB4
+Mcu.Pin25=PB5
+Mcu.Pin26=VP_IWDG_VS_IWDG
+Mcu.Pin27=VP_RNG_VS_RNG
+Mcu.Pin28=VP_RTC_VS_RTC_Activate
+Mcu.Pin29=VP_SYS_VS_Systick
+Mcu.Pin3=PH0-OSC_IN
+Mcu.Pin30=VP_TIM10_VS_ClockSourceINT
+Mcu.Pin31=VP_TIM11_VS_ClockSourceINT
+Mcu.Pin32=VP_TIM13_VS_ClockSourceINT
+Mcu.Pin33=VP_TIM14_VS_ClockSourceINT
+Mcu.Pin4=PH1-OSC_OUT
+Mcu.Pin5=PA2
+Mcu.Pin6=PA3
+Mcu.Pin7=PB1
+Mcu.Pin8=PB12
+Mcu.Pin9=PB13
+Mcu.PinsNb=34
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F407IGTx
+MxCube.Version=5.6.1
+MxDb.Version=DB.5.0.60
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
+PB1.Signal=ADCx_IN9
+PB12.Mode=Full_Duplex_Master
+PB12.Signal=I2S2_WS
+PB13.Locked=true
+PB13.Mode=Full_Duplex_Master
+PB13.Signal=I2S2_CK
+PB15.Mode=Full_Duplex_Master
+PB15.Signal=I2S2_SD
+PB3.Mode=Full_Duplex_Master
+PB3.Signal=SPI3_SCK
+PB4.Mode=Full_Duplex_Master
+PB4.Signal=SPI3_MISO
+PB5.Mode=Full_Duplex_Master
+PB5.Signal=SPI3_MOSI
+PC10.Mode=SD_4_bits_Wide_bus
+PC10.Signal=SDIO_D2
+PC11.Mode=SD_4_bits_Wide_bus
+PC11.Signal=SDIO_D3
+PC12.Mode=SD_4_bits_Wide_bus
+PC12.Signal=SDIO_CK
+PC14-OSC32_IN.Mode=LSE-External-Oscillator
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.Mode=LSE-External-Oscillator
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PC6.Mode=Master_Clock_Activated
+PC6.Signal=I2S2_MCK
+PC8.Mode=SD_4_bits_Wide_bus
+PC8.Signal=SDIO_D0
+PC9.Mode=SD_4_bits_Wide_bus
+PC9.Signal=SDIO_D1
+PD2.Mode=SD_4_bits_Wide_bus
+PD2.Signal=SDIO_CMD
+PF6.Signal=S_TIM10_CH1
+PH0-OSC_IN.Mode=HSE-External-Oscillator
+PH0-OSC_IN.Signal=RCC_OSC_IN
+PH1-OSC_OUT.Mode=HSE-External-Oscillator
+PH1-OSC_OUT.Signal=RCC_OSC_OUT
+PI2.Locked=true
+PI2.Mode=Full_Duplex_Master
+PI2.Signal=I2S2_ext_SD
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F407IGTx
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.25.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=CubeMX_Config.ioc
+ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=MDK-ARM V5.27
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_I2S2_Init-I2S2-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_RTC_Init-RTC-false-HAL-true,8-MX_SDIO_SD_Init-SDIO-false-HAL-true,9-MX_SPI3_Init-SPI3-false-HAL-true,10-MX_TIM10_Init-TIM10-false-HAL-true,11-MX_TIM11_Init-TIM11-false-HAL-true,12-MX_TIM13_Init-TIM13-false-HAL-true,13-MX_TIM14_Init-TIM14-false-HAL-true,14-MX_RNG_Init-RNG-false-HAL-true,15-MX_USART2_UART_Init-USART2-false-HAL-true
+RCC.48MHZClocksFreq_Value=48000000
+RCC.AHBFreq_Value=168000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV4
+RCC.APB1Freq_Value=42000000
+RCC.APB1TimFreq_Value=84000000
+RCC.APB2CLKDivider=RCC_HCLK_DIV2
+RCC.APB2Freq_Value=84000000
+RCC.APB2TimFreq_Value=168000000
+RCC.CortexFreq_Value=168000000
+RCC.EthernetFreq_Value=168000000
+RCC.FCLKCortexFreq_Value=168000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=168000000
+RCC.HSE_VALUE=25000000
+RCC.HSI_VALUE=16000000
+RCC.I2SClocksFreq_Value=96000000
+RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLSourceVirtual,RCC_RTC_Clock_Source,RCC_RTC_Clock_SourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
+RCC.LSI_VALUE=32000
+RCC.MCO2PinFreq_Value=168000000
+RCC.PLLCLKFreq_Value=168000000
+RCC.PLLM=25
+RCC.PLLN=336
+RCC.PLLQ=7
+RCC.PLLQCLKFreq_Value=48000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.RCC_RTC_Clock_Source=RCC_RTCCLKSOURCE_LSE
+RCC.RCC_RTC_Clock_SourceVirtual=RCC_RTCCLKSOURCE_LSE
+RCC.RTCFreq_Value=32768
+RCC.RTCHSEDivFreq_Value=12500000
+RCC.SYSCLKFreq_VALUE=168000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.VCOI2SOutputFreq_Value=192000000
+RCC.VCOInputFreq_Value=1000000
+RCC.VCOOutputFreq_Value=336000000
+RCC.VcooutputI2S=96000000
+SH.ADCx_IN9.0=ADC1_IN9,IN9
+SH.ADCx_IN9.ConfNb=1
+SH.S_TIM10_CH1.0=TIM10_CH1,PWM Generation1 CH1
+SH.S_TIM10_CH1.ConfNb=1
+SPI3.CalculateBaudRate=21.0 MBits/s
+SPI3.Direction=SPI_DIRECTION_2LINES
+SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+SPI3.Mode=SPI_MODE_MASTER
+SPI3.VirtualType=VM_MASTER
+TIM10.Channel=TIM_CHANNEL_1
+TIM10.IPParameters=Channel
+USART1.IPParameters=VirtualMode
+USART1.VirtualMode=VM_ASYNC
+USART2.IPParameters=VirtualMode
+USART2.VirtualMode=VM_ASYNC
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
+VP_RNG_VS_RNG.Mode=RNG_Activate
+VP_RNG_VS_RNG.Signal=RNG_VS_RNG
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM10_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM10_VS_ClockSourceINT.Signal=TIM10_VS_ClockSourceINT
+VP_TIM11_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM11_VS_ClockSourceINT.Signal=TIM11_VS_ClockSourceINT
+VP_TIM13_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM13_VS_ClockSourceINT.Signal=TIM13_VS_ClockSourceINT
+VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
+board=custom
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/main.h
new file mode 100644
index 0000000000..71f8e09516
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/main.h
@@ -0,0 +1,73 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
new file mode 100644
index 0000000000..9638f92d62
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
@@ -0,0 +1,443 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+
+  #define HAL_ADC_MODULE_ENABLED
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_CAN_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+/* #define HAL_LTDC_MODULE_ENABLED   */
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED   */
+#define HAL_SD_MODULE_ENABLED
+/* #define HAL_MMC_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE		      ((uint32_t)3300U) /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */            
+#define  USE_RTOS                     0U     
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/ 
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */    
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_it.h b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_it.h
new file mode 100644
index 0000000000..ab2ae38f21
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Inc/stm32f4xx_it.h
@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/main.c
new file mode 100644
index 0000000000..b2659cd456
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/main.c
@@ -0,0 +1,708 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc1;
+
+I2S_HandleTypeDef hi2s2;
+
+IWDG_HandleTypeDef hiwdg;
+
+RNG_HandleTypeDef hrng;
+
+RTC_HandleTypeDef hrtc;
+
+SD_HandleTypeDef hsd;
+
+SPI_HandleTypeDef hspi3;
+
+TIM_HandleTypeDef htim10;
+TIM_HandleTypeDef htim11;
+TIM_HandleTypeDef htim13;
+TIM_HandleTypeDef htim14;
+
+UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART1_UART_Init(void);
+static void MX_ADC1_Init(void);
+static void MX_I2S2_Init(void);
+static void MX_IWDG_Init(void);
+static void MX_RTC_Init(void);
+static void MX_SDIO_SD_Init(void);
+static void MX_SPI3_Init(void);
+static void MX_TIM10_Init(void);
+static void MX_TIM11_Init(void);
+static void MX_TIM13_Init(void);
+static void MX_TIM14_Init(void);
+static void MX_RNG_Init(void);
+static void MX_USART2_UART_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART1_UART_Init();
+  MX_ADC1_Init();
+  MX_I2S2_Init();
+  MX_IWDG_Init();
+  MX_RTC_Init();
+  MX_SDIO_SD_Init();
+  MX_SPI3_Init();
+  MX_TIM10_Init();
+  MX_TIM11_Init();
+  MX_TIM13_Init();
+  MX_TIM14_Init();
+  MX_RNG_Init();
+  MX_USART2_UART_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage 
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
+                              |RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 25;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S|RCC_PERIPHCLK_RTC;
+  PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
+  PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
+  PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief ADC1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_ADC1_Init(void)
+{
+
+  /* USER CODE BEGIN ADC1_Init 0 */
+
+  /* USER CODE END ADC1_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC1_Init 1 */
+
+  /* USER CODE END ADC1_Init 1 */
+  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) 
+  */
+  hadc1.Instance = ADC1;
+  hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
+  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
+  hadc1.Init.ScanConvMode = DISABLE;
+  hadc1.Init.ContinuousConvMode = DISABLE;
+  hadc1.Init.DiscontinuousConvMode = DISABLE;
+  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc1.Init.NbrOfConversion = 1;
+  hadc1.Init.DMAContinuousRequests = DISABLE;
+  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  if (HAL_ADC_Init(&hadc1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. 
+  */
+  sConfig.Channel = ADC_CHANNEL_9;
+  sConfig.Rank = 1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
+  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC1_Init 2 */
+
+  /* USER CODE END ADC1_Init 2 */
+
+}
+
+/**
+  * @brief I2S2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_I2S2_Init(void)
+{
+
+  /* USER CODE BEGIN I2S2_Init 0 */
+
+  /* USER CODE END I2S2_Init 0 */
+
+  /* USER CODE BEGIN I2S2_Init 1 */
+
+  /* USER CODE END I2S2_Init 1 */
+  hi2s2.Instance = SPI2;
+  hi2s2.Init.Mode = I2S_MODE_MASTER_TX;
+  hi2s2.Init.Standard = I2S_STANDARD_PHILIPS;
+  hi2s2.Init.DataFormat = I2S_DATAFORMAT_16B;
+  hi2s2.Init.MCLKOutput = I2S_MCLKOUTPUT_ENABLE;
+  hi2s2.Init.AudioFreq = I2S_AUDIOFREQ_8K;
+  hi2s2.Init.CPOL = I2S_CPOL_LOW;
+  hi2s2.Init.ClockSource = I2S_CLOCK_PLL;
+  hi2s2.Init.FullDuplexMode = I2S_FULLDUPLEXMODE_ENABLE;
+  if (HAL_I2S_Init(&hi2s2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN I2S2_Init 2 */
+
+  /* USER CODE END I2S2_Init 2 */
+
+}
+
+/**
+  * @brief IWDG Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_IWDG_Init(void)
+{
+
+  /* USER CODE BEGIN IWDG_Init 0 */
+
+  /* USER CODE END IWDG_Init 0 */
+
+  /* USER CODE BEGIN IWDG_Init 1 */
+
+  /* USER CODE END IWDG_Init 1 */
+  hiwdg.Instance = IWDG;
+  hiwdg.Init.Prescaler = IWDG_PRESCALER_4;
+  hiwdg.Init.Reload = 4095;
+  if (HAL_IWDG_Init(&hiwdg) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN IWDG_Init 2 */
+
+  /* USER CODE END IWDG_Init 2 */
+
+}
+
+/**
+  * @brief RNG Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RNG_Init(void)
+{
+
+  /* USER CODE BEGIN RNG_Init 0 */
+
+  /* USER CODE END RNG_Init 0 */
+
+  /* USER CODE BEGIN RNG_Init 1 */
+
+  /* USER CODE END RNG_Init 1 */
+  hrng.Instance = RNG;
+  if (HAL_RNG_Init(&hrng) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RNG_Init 2 */
+
+  /* USER CODE END RNG_Init 2 */
+
+}
+
+/**
+  * @brief RTC Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+  /** Initialize RTC Only 
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
+  hrtc.Init.AsynchPrediv = 127;
+  hrtc.Init.SynchPrediv = 255;
+  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
+  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
+/**
+  * @brief SDIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SDIO_SD_Init(void)
+{
+
+  /* USER CODE BEGIN SDIO_Init 0 */
+
+  /* USER CODE END SDIO_Init 0 */
+
+  /* USER CODE BEGIN SDIO_Init 1 */
+
+  /* USER CODE END SDIO_Init 1 */
+  hsd.Instance = SDIO;
+  hsd.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+  hsd.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+  hsd.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+  hsd.Init.BusWide = SDIO_BUS_WIDE_1B;
+  hsd.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+  hsd.Init.ClockDiv = 0;
+  if (HAL_SD_Init(&hsd) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SDIO_Init 2 */
+
+  /* USER CODE END SDIO_Init 2 */
+
+}
+
+/**
+  * @brief SPI3 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SPI3_Init(void)
+{
+
+  /* USER CODE BEGIN SPI3_Init 0 */
+
+  /* USER CODE END SPI3_Init 0 */
+
+  /* USER CODE BEGIN SPI3_Init 1 */
+
+  /* USER CODE END SPI3_Init 1 */
+  /* SPI3 parameter configuration*/
+  hspi3.Instance = SPI3;
+  hspi3.Init.Mode = SPI_MODE_MASTER;
+  hspi3.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi3.Init.DataSize = SPI_DATASIZE_8BIT;
+  hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi3.Init.NSS = SPI_NSS_SOFT;
+  hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+  hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi3.Init.CRCPolynomial = 10;
+  if (HAL_SPI_Init(&hspi3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI3_Init 2 */
+
+  /* USER CODE END SPI3_Init 2 */
+
+}
+
+/**
+  * @brief TIM10 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM10_Init(void)
+{
+
+  /* USER CODE BEGIN TIM10_Init 0 */
+
+  /* USER CODE END TIM10_Init 0 */
+
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM10_Init 1 */
+
+  /* USER CODE END TIM10_Init 1 */
+  htim10.Instance = TIM10;
+  htim10.Init.Prescaler = 0;
+  htim10.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim10.Init.Period = 0;
+  htim10.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim10.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim10) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim10) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim10, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM10_Init 2 */
+
+  /* USER CODE END TIM10_Init 2 */
+  HAL_TIM_MspPostInit(&htim10);
+
+}
+
+/**
+  * @brief TIM11 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM11_Init(void)
+{
+
+  /* USER CODE BEGIN TIM11_Init 0 */
+
+  /* USER CODE END TIM11_Init 0 */
+
+  /* USER CODE BEGIN TIM11_Init 1 */
+
+  /* USER CODE END TIM11_Init 1 */
+  htim11.Instance = TIM11;
+  htim11.Init.Prescaler = 0;
+  htim11.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim11.Init.Period = 0;
+  htim11.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim11.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim11) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM11_Init 2 */
+
+  /* USER CODE END TIM11_Init 2 */
+
+}
+
+/**
+  * @brief TIM13 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM13_Init(void)
+{
+
+  /* USER CODE BEGIN TIM13_Init 0 */
+
+  /* USER CODE END TIM13_Init 0 */
+
+  /* USER CODE BEGIN TIM13_Init 1 */
+
+  /* USER CODE END TIM13_Init 1 */
+  htim13.Instance = TIM13;
+  htim13.Init.Prescaler = 0;
+  htim13.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim13.Init.Period = 0;
+  htim13.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim13.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim13) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM13_Init 2 */
+
+  /* USER CODE END TIM13_Init 2 */
+
+}
+
+/**
+  * @brief TIM14 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM14_Init(void)
+{
+
+  /* USER CODE BEGIN TIM14_Init 0 */
+
+  /* USER CODE END TIM14_Init 0 */
+
+  /* USER CODE BEGIN TIM14_Init 1 */
+
+  /* USER CODE END TIM14_Init 1 */
+  htim14.Instance = TIM14;
+  htim14.Init.Prescaler = 0;
+  htim14.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim14.Init.Period = 0;
+  htim14.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim14.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim14) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM14_Init 2 */
+
+  /* USER CODE END TIM14_Init 2 */
+
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/**
+  * @brief USART2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART2_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART2_Init 0 */
+
+  /* USER CODE END USART2_Init 0 */
+
+  /* USER CODE BEGIN USART2_Init 1 */
+
+  /* USER CODE END USART2_Init 1 */
+  huart2.Instance = USART2;
+  huart2.Init.BaudRate = 115200;
+  huart2.Init.WordLength = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits = UART_STOPBITS_1;
+  huart2.Init.Parity = UART_PARITY_NONE;
+  huart2.Init.Mode = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART2_Init 2 */
+
+  /* USER CODE END USART2_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOI_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{ 
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
new file mode 100644
index 0000000000..5f62b1806d
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -0,0 +1,721 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : stm32f4xx_hal_msp.c
+  * Description        : This file provides code for the MSP Initialization
+  *                      and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+                    /**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hadc->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspInit 0 */
+
+  /* USER CODE END ADC1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_ADC1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_1;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN ADC1_MspInit 1 */
+
+  /* USER CODE END ADC1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  if(hadc->Instance==ADC1)
+  {
+  /* USER CODE BEGIN ADC1_MspDeInit 0 */
+
+  /* USER CODE END ADC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC1_CLK_DISABLE();
+
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);
+
+  /* USER CODE BEGIN ADC1_MspDeInit 1 */
+
+  /* USER CODE END ADC1_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief I2S MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hi2s: I2S handle pointer
+* @retval None
+*/
+void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hi2s->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspInit 0 */
+
+  /* USER CODE END SPI2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_SPI2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOI_CLK_ENABLE();
+    /**I2S2 GPIO Configuration
+    PB12     ------> I2S2_WS
+    PB13     ------> I2S2_CK
+    PB15     ------> I2S2_SD
+    PC6     ------> I2S2_MCK
+    PI2     ------> I2S2_ext_SD
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_15;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF6_I2S2ext;
+    HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI2_MspInit 1 */
+
+  /* USER CODE END SPI2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief I2S MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hi2s: I2S handle pointer
+* @retval None
+*/
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
+{
+  if(hi2s->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspDeInit 0 */
+
+  /* USER CODE END SPI2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI2_CLK_DISABLE();
+
+    /**I2S2 GPIO Configuration
+    PB12     ------> I2S2_WS
+    PB13     ------> I2S2_CK
+    PB15     ------> I2S2_SD
+    PC6     ------> I2S2_MCK
+    PI2     ------> I2S2_ext_SD
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_15);
+
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6);
+
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_2);
+
+  /* USER CODE BEGIN SPI2_MspDeInit 1 */
+
+  /* USER CODE END SPI2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief RNG MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrng: RNG handle pointer
+* @retval None
+*/
+void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
+{
+  if(hrng->Instance==RNG)
+  {
+  /* USER CODE BEGIN RNG_MspInit 0 */
+
+  /* USER CODE END RNG_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_RNG_CLK_ENABLE();
+  /* USER CODE BEGIN RNG_MspInit 1 */
+
+  /* USER CODE END RNG_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RNG MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrng: RNG handle pointer
+* @retval None
+*/
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
+{
+  if(hrng->Instance==RNG)
+  {
+  /* USER CODE BEGIN RNG_MspDeInit 0 */
+
+  /* USER CODE END RNG_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RNG_CLK_DISABLE();
+  /* USER CODE BEGIN RNG_MspDeInit 1 */
+
+  /* USER CODE END RNG_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief RTC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RTC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief SD MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hsd: SD handle pointer
+* @retval None
+*/
+void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hsd->Instance==SDIO)
+  {
+  /* USER CODE BEGIN SDIO_MspInit 0 */
+
+  /* USER CODE END SDIO_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_SDIO_CLK_ENABLE();
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    /**SDIO GPIO Configuration
+    PC8     ------> SDIO_D0
+    PC9     ------> SDIO_D1
+    PC10     ------> SDIO_D2
+    PC11     ------> SDIO_D3
+    PC12     ------> SDIO_CK
+    PD2     ------> SDIO_CMD
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+                          |GPIO_PIN_12;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SDIO_MspInit 1 */
+
+  /* USER CODE END SDIO_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief SD MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hsd: SD handle pointer
+* @retval None
+*/
+void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
+{
+  if(hsd->Instance==SDIO)
+  {
+  /* USER CODE BEGIN SDIO_MspDeInit 0 */
+
+  /* USER CODE END SDIO_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SDIO_CLK_DISABLE();
+
+    /**SDIO GPIO Configuration
+    PC8     ------> SDIO_D0
+    PC9     ------> SDIO_D1
+    PC10     ------> SDIO_D2
+    PC11     ------> SDIO_D3
+    PC12     ------> SDIO_CK
+    PD2     ------> SDIO_CMD
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
+                          |GPIO_PIN_12);
+
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
+
+  /* USER CODE BEGIN SDIO_MspDeInit 1 */
+
+  /* USER CODE END SDIO_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hspi->Instance==SPI3)
+  {
+  /* USER CODE BEGIN SPI3_MspInit 0 */
+
+  /* USER CODE END SPI3_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_SPI3_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**SPI3 GPIO Configuration
+    PB3     ------> SPI3_SCK
+    PB4     ------> SPI3_MISO
+    PB5     ------> SPI3_MOSI
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI3_MspInit 1 */
+
+  /* USER CODE END SPI3_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+  if(hspi->Instance==SPI3)
+  {
+  /* USER CODE BEGIN SPI3_MspDeInit 0 */
+
+  /* USER CODE END SPI3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI3_CLK_DISABLE();
+
+    /**SPI3 GPIO Configuration
+    PB3     ------> SPI3_SCK
+    PB4     ------> SPI3_MISO
+    PB5     ------> SPI3_MOSI
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
+
+  /* USER CODE BEGIN SPI3_MspDeInit 1 */
+
+  /* USER CODE END SPI3_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM10)
+  {
+  /* USER CODE BEGIN TIM10_MspInit 0 */
+
+  /* USER CODE END TIM10_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM10_CLK_ENABLE();
+  /* USER CODE BEGIN TIM10_MspInit 1 */
+
+  /* USER CODE END TIM10_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM11)
+  {
+  /* USER CODE BEGIN TIM11_MspInit 0 */
+
+  /* USER CODE END TIM11_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM11_CLK_ENABLE();
+  /* USER CODE BEGIN TIM11_MspInit 1 */
+
+  /* USER CODE END TIM11_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM13)
+  {
+  /* USER CODE BEGIN TIM13_MspInit 0 */
+
+  /* USER CODE END TIM13_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM13_CLK_ENABLE();
+  /* USER CODE BEGIN TIM13_MspInit 1 */
+
+  /* USER CODE END TIM13_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM14)
+  {
+  /* USER CODE BEGIN TIM14_MspInit 0 */
+
+  /* USER CODE END TIM14_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM14_CLK_ENABLE();
+  /* USER CODE BEGIN TIM14_MspInit 1 */
+
+  /* USER CODE END TIM14_MspInit 1 */
+  }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(htim->Instance==TIM10)
+  {
+  /* USER CODE BEGIN TIM10_MspPostInit 0 */
+
+  /* USER CODE END TIM10_MspPostInit 0 */
+
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+    /**TIM10 GPIO Configuration
+    PF6     ------> TIM10_CH1
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF3_TIM10;
+    HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM10_MspPostInit 1 */
+
+  /* USER CODE END TIM10_MspPostInit 1 */
+  }
+
+}
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM10)
+  {
+  /* USER CODE BEGIN TIM10_MspDeInit 0 */
+
+  /* USER CODE END TIM10_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM10_CLK_DISABLE();
+  /* USER CODE BEGIN TIM10_MspDeInit 1 */
+
+  /* USER CODE END TIM10_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM11)
+  {
+  /* USER CODE BEGIN TIM11_MspDeInit 0 */
+
+  /* USER CODE END TIM11_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM11_CLK_DISABLE();
+  /* USER CODE BEGIN TIM11_MspDeInit 1 */
+
+  /* USER CODE END TIM11_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM13)
+  {
+  /* USER CODE BEGIN TIM13_MspDeInit 0 */
+
+  /* USER CODE END TIM13_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM13_CLK_DISABLE();
+  /* USER CODE BEGIN TIM13_MspDeInit 1 */
+
+  /* USER CODE END TIM13_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM14)
+  {
+  /* USER CODE BEGIN TIM14_MspDeInit 0 */
+
+  /* USER CODE END TIM14_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM14_CLK_DISABLE();
+  /* USER CODE BEGIN TIM14_MspDeInit 1 */
+
+  /* USER CODE END TIM14_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspInit 0 */
+
+  /* USER CODE END USART1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART1 GPIO Configuration
+    PA9     ------> USART1_TX
+    PA10     ------> USART1_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
+  }
+  else if(huart->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspInit 0 */
+
+  /* USER CODE END USART2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART2 GPIO Configuration
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART2_MspInit 1 */
+
+  /* USER CODE END USART2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+  /* USER CODE END USART1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART1_CLK_DISABLE();
+
+    /**USART1 GPIO Configuration
+    PA9     ------> USART1_TX
+    PA10     ------> USART1_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
+
+  /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+  /* USER CODE END USART1_MspDeInit 1 */
+  }
+  else if(huart->Instance==USART2)
+  {
+  /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+  /* USER CODE END USART2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART2_CLK_DISABLE();
+
+    /**USART2 GPIO Configuration
+    PA2     ------> USART2_TX
+    PA3     ------> USART2_RX
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
+
+  /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+  /* USER CODE END USART2_MspDeInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_it.c b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_it.c
new file mode 100644
index 0000000000..84413fb5f2
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/stm32f4xx_it.c
@@ -0,0 +1,203 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f4xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+ 
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */ 
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/system_stm32f4xx.c b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/system_stm32f4xx.c
new file mode 100644
index 0000000000..bcb2b9f4a5
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/CubeMX_Config/Src/system_stm32f4xx.c
@@ -0,0 +1,727 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+ 
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+  
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp); 
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else  
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else    
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
+  (void)(tmp); 
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/Kconfig b/bsp/stm32/stm32f407-armfly-v5/board/Kconfig
new file mode 100644
index 0000000000..7c6b8a97f0
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/Kconfig
@@ -0,0 +1,199 @@
+menu "Hardware Drivers Config"
+
+config SOC_STM32F407IG
+    bool
+    select SOC_SERIES_STM32F4
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+    config BSP_USING_RS232_TO_USART
+        bool "Enable RS232 TO USART (uart1)"
+        select BSP_USING_UART
+        select BSP_USING_UART1
+        default y
+		
+	config BSP_USING_SPI_FLASH
+        bool "Enable SPI FLASH (W25Q64 spi3)"
+        select BSP_USING_SPI
+        select BSP_USING_SPI3
+        select RT_USING_SFUD
+        select RT_SFUD_USING_SFDP
+        default n
+
+    config BSP_USING_SDCARD
+        bool "Enable SDCARD (sdio)"
+        select BSP_USING_SDIO
+        select RT_USING_DFS
+        select RT_USING_DFS_ELMFAT
+        default n
+
+    config BSP_USING_MPU6050
+        bool "Enable MPU6050(i2c2)"
+        select BSP_USING_I2C2
+        select PKG_USING_SENSORS_DRIVERS
+        select PKG_USING_MPU6XXX
+        select PKG_USING_MPU6XXX_SAMPLE
+        select PKG_USING_MPU6XXX_LATEST_VERSION
+        default n
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default y
+
+            config BSP_UART2_RX_USING_DMA
+                bool "Enable UART2 RX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+
+        endif
+        
+    config BSP_USING_ON_CHIP_FLASH
+        bool "Enable on-chip FLASH"
+        default n
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
+        default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI3
+                bool "Enable SPI3 BUS"
+                default n
+
+            config BSP_SPI3_TX_USING_DMA
+                bool "Enable SPI3 TX DMA"
+                depends on BSP_USING_SPI3
+                default n
+                
+            config BSP_SPI3_RX_USING_DMA
+                bool "Enable SPI3 RX DMA"
+                depends on BSP_USING_SPI3
+                select BSP_SPI3_TX_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_I2C2
+        bool "Enable I2C2 BUS (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C2
+            comment "Notice: PH4 --> 116; PH5 --> 117"
+            config BSP_I2C2_SCL_PIN
+                int "i2c2 scl pin number"
+                range 1 143
+                default 116
+            config BSP_I2C2_SDA_PIN
+                int "I2C2 sda pin number"
+                range 1 143
+                default 117
+        endif
+
+    menuconfig BSP_USING_TIM
+        bool "Enable timer"
+        default n
+        select RT_USING_HWTIMER
+        if BSP_USING_TIM
+            config BSP_USING_TIM11
+                bool "Enable TIM11"
+                default n
+
+            config BSP_USING_TIM13
+                bool "Enable TIM13"
+                default n
+
+            config BSP_USING_TIM14
+                bool "Enable TIM14"
+                default n
+        endif
+
+    menuconfig BSP_USING_PWM
+        bool "Enable pwm"
+        default n
+        select RT_USING_PWM
+        if BSP_USING_PWM
+        menuconfig BSP_USING_PWM10
+            bool "Enable timer10 output pwm"
+            default n
+            if BSP_USING_PWM10
+                config BSP_USING_PWM10_CH1
+                    bool "Enable PWM10 channel1"
+                    default n
+            endif
+        endif
+
+    menuconfig BSP_USING_ADC
+        bool "Enable ADC"
+        default n
+        select RT_USING_ADC
+        if BSP_USING_ADC
+            config BSP_USING_ADC1
+                bool "Enable ADC1"
+                default n
+        endif
+
+    menuconfig BSP_USING_ONCHIP_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        select RT_USING_LIBC
+        default n
+        if BSP_USING_ONCHIP_RTC
+            choice
+                prompt "Select clock source"
+                default BSP_RTC_USING_LSE
+
+                config BSP_RTC_USING_LSE
+                    bool "RTC USING LSE"
+
+                config BSP_RTC_USING_LSI
+                    bool "RTC USING LSI"
+            endchoice
+        endif
+
+    config BSP_USING_WDT
+        bool "Enable Watchdog Timer"
+        select RT_USING_WDT
+        default n
+
+    config BSP_USING_SDIO
+        bool "Enable SDIO"
+        select RT_USING_SDIO
+        select RT_USING_DFS
+        default n
+
+    source "../libraries/HAL_Drivers/Kconfig"    
+    
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+ 
+endmenu
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/SConscript b/bsp/stm32/stm32f407-armfly-v5/board/SConscript
new file mode 100644
index 0000000000..2528db7cee
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/SConscript
@@ -0,0 +1,44 @@
+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+CubeMX_Config/Src/stm32f4xx_hal_msp.c
+''')
+
+if GetDepend(['BSP_USING_SPI_FLASH']):
+    src += Glob('ports/spi_flash_init.c')
+
+if GetDepend(['BSP_USING_SDCARD']):
+    src += Glob('ports/sdcard_port.c')
+
+path =  [cwd]
+path += [cwd + '/CubeMX_Config/Inc']
+path += [cwd + '/ports']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f407xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f407xx.s']
+
+# STM32F405xx) || STM32F415xx) || STM32F407xx) || STM32F417xx)
+# STM32F427xx) || STM32F437xx) || STM32F429xx) || STM32F439xx)
+# STM32F401xC) || STM32F401xE) || STM32F410Tx) || STM32F410Cx)
+# STM32F410Rx) || STM32F411xE) || STM32F446xx) || STM32F469xx)
+# STM32F479xx) || STM32F412Cx) || STM32F412Rx) || STM32F412Vx)
+# STM32F412Zx) || STM32F413xx) || STM32F423xx)
+# You can select chips from the list above
+CPPDEFINES = ['STM32F407xx']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/board.c b/bsp/stm32/stm32f407-armfly-v5/board/board.c
new file mode 100644
index 0000000000..e64882e5e1
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/board.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#include "board.h"
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage 
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
+                              |RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 25;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S|RCC_PERIPHCLK_RTC;
+  PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
+  PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
+  PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/board.h b/bsp/stm32/stm32f407-armfly-v5/board/board.h
new file mode 100644
index 0000000000..68016d18bd
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/board.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include <stm32f4xx.h>
+#include "drv_common.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM32_FLASH_START_ADRESS     ((uint32_t)0x08000000)
+#define STM32_FLASH_SIZE             (1024 * 1024)
+#define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
+
+#define STM32_SRAM_SIZE           128
+#define STM32_SRAM_END            (0x20000000 + STM32_SRAM_SIZE * 1024)
+
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN      (&__bss_end)
+#endif
+
+#define HEAP_END        STM32_SRAM_END
+
+void SystemClock_Config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.icf b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.icf
new file mode 100644
index 0000000000..067691151f
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.icf
@@ -0,0 +1,28 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/

+/*-Editor annotation file-*/

+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */

+/*-Specials-*/

+define symbol __ICFEDIT_intvec_start__ = 0x08000000;

+/*-Memory Regions-*/

+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;

+define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;

+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;

+define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;

+/*-Sizes-*/

+define symbol __ICFEDIT_size_cstack__ = 0x0400;

+define symbol __ICFEDIT_size_heap__   = 0x0000;

+/**** End of ICF editor section. ###ICF###*/

+

+define memory mem with size = 4G;

+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];

+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];

+

+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };

+

+initialize by copy { readwrite };

+do not initialize  { section .noinit };

+

+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };

+

+place in ROM_region   { readonly };

+place in RAM_region   { readwrite, last block CSTACK};

diff --git a/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.lds b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.lds
new file mode 100644
index 0000000000..00a1f08cf1
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.lds
@@ -0,0 +1,157 @@
+/*
+ * linker script for STM32F4xx with GNU ld
+ * bernard.xiong 2009-10-14
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */
+    RAM (rw) : ORIGIN = 0x20000000, LENGTH =  128k /* 128KB sram */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x200;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4);
+
+        _etext = .;
+    } > ROM = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > ROM
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >RAM
+
+    .stack : 
+    {
+        . = ALIGN(4);
+        _sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        
+        *(.bss.init)
+    } > RAM
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.sct b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.sct
new file mode 100644
index 0000000000..0d7c47992d
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/linker_scripts/link.sct
@@ -0,0 +1,15 @@
+; *************************************************************

+; *** Scatter-Loading Description File generated by uVision ***

+; *************************************************************

+

+LR_IROM1 0x08000000 0x00100000  {    ; load region size_region

+  ER_IROM1 0x08000000 0x00100000  {  ; load address = execution address

+   *.o (RESET, +First)

+   *(InRoot$$Sections)

+   .ANY (+RO)

+  }

+  RW_IRAM1 0x20000000 0x00020000  {  ; RW data

+   .ANY (+RW +ZI)

+  }

+}

+

diff --git a/bsp/stm32/stm32f407-armfly-v5/board/ports/fal_cfg.h b/bsp/stm32/stm32f407-armfly-v5/board/ports/fal_cfg.h
new file mode 100644
index 0000000000..20bcf9e11a
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/ports/fal_cfg.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#ifndef _FAL_CFG_H_
+#define _FAL_CFG_H_
+
+#include <rtthread.h>
+#include <board.h>
+
+#define FLASH_SIZE_GRANULARITY_16K   (4 * 16 * 1024)
+#define FLASH_SIZE_GRANULARITY_64K   (64 * 1024)
+#define FLASH_SIZE_GRANULARITY_128K  (7 * 128 * 1024)
+
+#define STM32_FLASH_START_ADRESS_16K  STM32_FLASH_START_ADRESS
+#define STM32_FLASH_START_ADRESS_64K  (STM32_FLASH_START_ADRESS_16K + FLASH_SIZE_GRANULARITY_16K)
+#define STM32_FLASH_START_ADRESS_128K (STM32_FLASH_START_ADRESS_64K + FLASH_SIZE_GRANULARITY_64K)
+
+extern const struct fal_flash_dev stm32_onchip_flash_16k;
+extern const struct fal_flash_dev stm32_onchip_flash_64k;
+extern const struct fal_flash_dev stm32_onchip_flash_128k;
+
+/* flash device table */
+#define FAL_FLASH_DEV_TABLE                                          \
+{                                                                    \
+    &stm32_onchip_flash_16k,                                         \
+    &stm32_onchip_flash_64k,                                         \
+    &stm32_onchip_flash_128k,                                        \
+}
+/* ====================== Partition Configuration ========================== */
+#ifdef FAL_PART_HAS_TABLE_CFG
+
+/* partition table */
+#define FAL_PART_TABLE                                                                                                     \
+{                                                                                                                          \
+    {FAL_PART_MAGIC_WROD, "bootloader", "onchip_flash_16k",  0 , FLASH_SIZE_GRANULARITY_16K , 0}, \
+    {FAL_PART_MAGIC_WROD, "param",      "onchip_flash_64k",  0 , FLASH_SIZE_GRANULARITY_64K , 0}, \
+    {FAL_PART_MAGIC_WROD, "app",        "onchip_flash_128k", 0 , FLASH_SIZE_GRANULARITY_128K, 0}, \
+}
+
+#endif /* FAL_PART_HAS_TABLE_CFG */
+#endif /* _FAL_CFG_H_ */
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/ports/sdcard_port.c b/bsp/stm32/stm32f407-armfly-v5/board/ports/sdcard_port.c
new file mode 100644
index 0000000000..5eead223c3
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/ports/sdcard_port.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#include <rtthread.h>
+
+#ifdef BSP_USING_SDCARD
+
+#include <dfs_elm.h>
+#include <dfs_fs.h>
+#include <dfs_posix.h>
+
+#define DBG_TAG "app.card"
+#define DBG_LVL DBG_INFO
+#include <rtdbg.h>
+
+void sd_mount(void *parameter)
+{
+    while (1)
+    {
+        rt_thread_mdelay(500);
+        if(rt_device_find("sd0") != RT_NULL)
+        {
+            if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
+            {
+                LOG_I("sd card mount to '/'");
+                break;
+            }
+            else
+            {
+                LOG_W("sd card mount to '/' failed!");
+            }
+        }
+    }
+}
+
+int stm32_sdcard_mount(void)
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
+                           1024, RT_THREAD_PRIORITY_MAX - 2, 20);
+    if (tid != RT_NULL)
+    {
+        rt_thread_startup(tid);
+    }
+    else
+    {
+        LOG_E("create sd_mount thread err!");
+    }
+    return RT_EOK;
+}
+INIT_APP_EXPORT(stm32_sdcard_mount);
+
+#endif /* BSP_USING_SDCARD */
+
diff --git a/bsp/stm32/stm32f407-armfly-v5/board/ports/spi_flash_init.c b/bsp/stm32/stm32f407-armfly-v5/board/ports/spi_flash_init.c
new file mode 100644
index 0000000000..9aa8f95c13
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/board/ports/spi_flash_init.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       		Notes
+ * 2020-07-13     Dozingfiretruck   first version
+ */
+
+#include <rtthread.h>
+#include "spi_flash.h"
+#include "spi_flash_sfud.h"
+#include "drv_spi.h"
+
+#if defined(BSP_USING_SPI_FLASH)
+static int rt_hw_spi_flash_init(void)
+{
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+    rt_hw_spi_device_attach("spi3", "spi30", GPIOF, GPIO_PIN_8);
+
+    if (RT_NULL == rt_sfud_flash_probe("W25Q64", "spi30"))
+    {
+        return -RT_ERROR;
+    };
+
+    return RT_EOK;
+}
+INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
+#endif
+
diff --git a/bsp/stm32/stm32f407-armfly-v5/figures/board.png b/bsp/stm32/stm32f407-armfly-v5/figures/board.png
new file mode 100644
index 0000000000..94de91c012
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/figures/board.png
diff --git a/bsp/stm32/stm32f407-armfly-v5/project.ewd b/bsp/stm32/stm32f407-armfly-v5/project.ewd
new file mode 100644
index 0000000000..e94c83ed06
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.ewd
@@ -0,0 +1,2834 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>rt-thread</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>29</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\STM32F407ZG.ddf</state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.11.3.13977</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>JLINK_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state>8.11.3.13977</state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state>$TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F4xxx.board</state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>7</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state>168.0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>29</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.11.3.13977</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>ARMSIM_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+</project>
diff --git a/bsp/stm32/stm32f407-armfly-v5/project.ewp b/bsp/stm32/stm32f407-armfly-v5/project.ewp
new file mode 100644
index 0000000000..db4161a4b3
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.ewp
@@ -0,0 +1,2410 @@
+<project>

+  <fileVersion>3</fileVersion>

+  <configuration>

+    <name>rt-thread</name>

+    <toolchain>

+      <name>ARM</name>

+    </toolchain>

+    <debug>1</debug>

+    <settings>

+      <name>General</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <version>29</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>ExePath</name>

+          <state>build\iar\Exe</state>

+        </option>

+        <option>

+          <name>ObjPath</name>

+          <state>build\iar\Obj</state>

+        </option>

+        <option>

+          <name>ListPath</name>

+          <state>build\iar\List</state>

+        </option>

+        <option>

+          <name>GEndianMode</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>Input description</name>

+          <state>Automatic choice of formatter, without multibyte support.</state>

+        </option>

+        <option>

+          <name>Output description</name>

+          <state>Automatic choice of formatter, without multibyte support.</state>

+        </option>

+        <option>

+          <name>GOutputBinary</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCoreOrChip</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelect</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelectSlave</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>RTDescription</name>

+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>

+        </option>

+        <option>

+          <name>OGProductVersion</name>

+          <state>6.30.6.53380</state>

+        </option>

+        <option>

+          <name>OGLastSavedByProductVersion</name>

+          <state>8.11.3.13977</state>

+        </option>

+        <option>

+          <name>GeneralEnableMisra</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraVerbose</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGChipSelectEditMenu</name>

+          <state>STM32F407ZG	ST STM32F407ZG</state>

+        </option>

+        <option>

+          <name>GenLowLevelInterface</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GEndianModeBE</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OGBufferedTerminalOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenStdoutInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>GeneralMisraVer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>RTConfigPath2</name>

+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>

+        </option>

+        <option>

+          <name>GBECoreSlave</name>

+          <version>25</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>OGUseCmsis</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGUseCmsisDspLib</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibThreads</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CoreVariant</name>

+          <version>25</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>GFPUDeviceSlave</name>

+          <state>STM32F407ZG	ST STM32F407ZG</state>

+        </option>

+        <option>

+          <name>FPU2</name>

+          <version>0</version>

+          <state>4</state>

+        </option>

+        <option>

+          <name>NrRegs</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>NEON</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUCoreSlave2</name>

+          <version>25</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>OGCMSISPackSelectDevice</name>

+        </option>

+        <option>

+          <name>OgLibHeap</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGLibAdditionalLocale</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenLocaleTags</name>

+          <state />

+        </option>

+        <option>

+          <name>GenLocaleDisplayOnly</name>

+          <state />

+        </option>

+        <option>

+          <name>DSPExtension</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>ICCARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>34</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>CCOptimizationNoSizeConstraints</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDefines</name>

+          <state />

+          <state>STM32F407xx</state>

+          <state>USE_HAL_DRIVER</state>

+        </option>

+        <option>

+          <name>CCPreprocFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocComments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMnemonics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMessages</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagSuppress</name>

+          <state>Pa050</state>

+        </option>

+        <option>

+          <name>CCDiagRemark</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagWarning</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagError</name>

+          <state />

+        </option>

+        <option>

+          <name>CCObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCAllowList</name>

+          <version>1</version>

+          <state>00000000</state>

+        </option>

+        <option>

+          <name>CCDebugInfo</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IEndianMode</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IExtraOptionsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLangConformance</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCSignedPlainChar</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCRequirePrototypes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagWarnAreErr</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCompilerRuntimeInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OutputFile</name>

+          <state>$FILE_BNAME$.o</state>

+        </option>

+        <option>

+          <name>CCLibConfigHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>PreInclude</name>

+          <state />

+        </option>

+        <option>

+          <name>CompilerMisraOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCIncludePath2</name>

+          <state />

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>

+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>

+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>

+          <state>$PROJ_DIR$\.</state>

+          <state>$PROJ_DIR$\applications</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>

+          <state>$PROJ_DIR$\board</state>

+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>

+          <state>$PROJ_DIR$\..\..\..\include</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>

+        </option>

+        <option>

+          <name>CCStdIncCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCodeSection</name>

+          <state>.text</state>

+        </option>

+        <option>

+          <name>IProcessorMode2</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptLevel</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptStrategy</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptLevelSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>CCPosIndRopi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndRwpi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndNoDynInit</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccLang</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCDialect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccAllowVLA</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccStaticDestr</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccCppInlineSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccFloatSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCNoLiteralPool</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptStrategySlave</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCGuardCalls</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccExceptions2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccRTTI2</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>AARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>10</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>AObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AEndian</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>ACaseSensitivity</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacroChars</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnWhat</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnOne</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange1</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange2</name>

+          <state />

+        </option>

+        <option>

+          <name>ADebug</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AltRegisterNames</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ADefines</name>

+          <state />

+        </option>

+        <option>

+          <name>AList</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AListHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AListing</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>Includes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacDefs</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacExps</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacExec</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OnlyAssed</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MultiLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLengthCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLength</name>

+          <state>80</state>

+        </option>

+        <option>

+          <name>TabSpacing</name>

+          <state>8</state>

+        </option>

+        <option>

+          <name>AXRef</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDefines</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefInternal</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDual</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AOutputFile</name>

+          <state>$FILE_BNAME$.o</state>

+        </option>

+        <option>

+          <name>ALimitErrorsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ALimitErrorsEdit</name>

+          <state>100</state>

+        </option>

+        <option>

+          <name>AIgnoreStdInclude</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AUserIncludes</name>

+          <state />

+        </option>

+        <option>

+          <name>AExtraOptionsCheckV2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AExtraOptionsV2</name>

+          <state />

+        </option>

+        <option>

+          <name>AsmNoLiteralPool</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>OBJCOPY</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>1</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>OOCOutputFormat</name>

+          <version>3</version>

+          <state>3</state>

+        </option>

+        <option>

+          <name>OCOutputOverride</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCOutputFile</name>

+          <state>../../../rtthread.bin</state>

+        </option>

+        <option>

+          <name>OOCCommandLineProducer</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCObjCopyEnable</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>CUSTOM</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <extensions />

+        <cmdline />

+        <hasPrio>0</hasPrio>

+      </data>

+    </settings>

+    <settings>

+      <name>BICOMP</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+    <settings>

+      <name>BUILDACTION</name>

+      <archiveVersion>1</archiveVersion>

+      <data>

+        <prebuild />

+        <postbuild />

+      </data>

+    </settings>

+    <settings>

+      <name>ILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>20</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>IlinkLibIOConfig</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>XLinkMisraHandler</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkInputFileSlave</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOutputFile</name>

+          <state>project.out</state>

+        </option>

+        <option>

+          <name>IlinkDebugInfoEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkKeepSymbols</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySymbol</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySegment</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryAlign</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkConfigDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkMapFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogInitialization</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogModule</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogSection</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogVeneer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfOverride</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile</name>

+          <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>

+        </option>

+        <option>

+          <name>IlinkIcfFileSlave</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkSuppressDiags</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsRem</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsWarn</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsErr</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkWarningsAreErrors</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkUseExtraOptions</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkLowLevelInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAutoLibEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAdditionalLibs</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkOverrideProgramEntryLabel</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabelSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabel</name>

+          <state>__iar_program_start</state>

+        </option>

+        <option>

+          <name>DoFill</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>FillerByte</name>

+          <state>0xFF</state>

+        </option>

+        <option>

+          <name>FillerStart</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>FillerEnd</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>CrcSize</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcAlign</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcPoly</name>

+          <state>0x11021</state>

+        </option>

+        <option>

+          <name>CrcCompl</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcBitOrder</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcInitialValue</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>DoCrc</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkBE8Slave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkBufferedTerminalOutput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkStdoutInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcFullSize</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIElfToolPostProcess</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogAutoLibSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogRedirSymbols</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogUnusedFragments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcReverseByteOrder</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcUseAsInput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptInline</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsAllow</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsForce</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptMergeDuplSections</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptUseVfe</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptForceVfe</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackAnalysisEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackControlFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkStackCallGraphFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CrcAlgorithm</name>

+          <version>1</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcUnitSize</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkThreadsSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLogCallGraph</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile_AltDefault</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkHeapSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLocaleSelect</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>IARCHIVE</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>0</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>IarchiveInputs</name>

+          <state />

+        </option>

+        <option>

+          <name>IarchiveOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IarchiveOutput</name>

+          <state>###Unitialized###</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>BILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+  </configuration>

+  <configuration>

+    <name>Release</name>

+    <toolchain>

+      <name>ARM</name>

+    </toolchain>

+    <debug>0</debug>

+    <settings>

+      <name>General</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <version>29</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>ExePath</name>

+          <state>Release\Exe</state>

+        </option>

+        <option>

+          <name>ObjPath</name>

+          <state>Release\Obj</state>

+        </option>

+        <option>

+          <name>ListPath</name>

+          <state>Release\List</state>

+        </option>

+        <option>

+          <name>GEndianMode</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>Input description</name>

+          <state />

+        </option>

+        <option>

+          <name>Output description</name>

+          <state />

+        </option>

+        <option>

+          <name>GOutputBinary</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCoreOrChip</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelect</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelectSlave</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>RTDescription</name>

+          <state />

+        </option>

+        <option>

+          <name>OGProductVersion</name>

+          <state>6.30.6.53380</state>

+        </option>

+        <option>

+          <name>OGLastSavedByProductVersion</name>

+          <state>8.11.3.13977</state>

+        </option>

+        <option>

+          <name>GeneralEnableMisra</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraVerbose</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGChipSelectEditMenu</name>

+          <state>Default	None</state>

+        </option>

+        <option>

+          <name>GenLowLevelInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GEndianModeBE</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGBufferedTerminalOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenStdoutInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>GeneralMisraVer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>RTConfigPath2</name>

+          <state />

+        </option>

+        <option>

+          <name>GBECoreSlave</name>

+          <version>25</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OGUseCmsis</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGUseCmsisDspLib</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibThreads</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CoreVariant</name>

+          <version>25</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUDeviceSlave</name>

+          <state>Default	None</state>

+        </option>

+        <option>

+          <name>FPU2</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>NrRegs</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>NEON</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUCoreSlave2</name>

+          <version>25</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCMSISPackSelectDevice</name>

+        </option>

+        <option>

+          <name>OgLibHeap</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGLibAdditionalLocale</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenLocaleTags</name>

+          <state />

+        </option>

+        <option>

+          <name>GenLocaleDisplayOnly</name>

+          <state />

+        </option>

+        <option>

+          <name>DSPExtension</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>ICCARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>34</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>CCOptimizationNoSizeConstraints</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDefines</name>

+          <state>STM32F407xx</state>

+          <state>USE_HAL_DRIVER</state>

+        </option>

+        <option>

+          <name>CCPreprocFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocComments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMnemonics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMessages</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagSuppress</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagRemark</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagWarning</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagError</name>

+          <state />

+        </option>

+        <option>

+          <name>CCObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCAllowList</name>

+          <version>1</version>

+          <state>11111110</state>

+        </option>

+        <option>

+          <name>CCDebugInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IEndianMode</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IExtraOptionsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLangConformance</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCSignedPlainChar</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCRequirePrototypes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagWarnAreErr</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCompilerRuntimeInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLibConfigHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>PreInclude</name>

+          <state />

+        </option>

+        <option>

+          <name>CompilerMisraOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCIncludePath2</name>

+          <state />

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>

+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>

+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>

+          <state>$PROJ_DIR$\.</state>

+          <state>$PROJ_DIR$\applications</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>

+          <state>$PROJ_DIR$\board</state>

+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>

+          <state>$PROJ_DIR$\..\..\..\include</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>

+        </option>

+        <option>

+          <name>CCStdIncCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCodeSection</name>

+          <state>.text</state>

+        </option>

+        <option>

+          <name>IProcessorMode2</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptLevel</name>

+          <state>3</state>

+        </option>

+        <option>

+          <name>CCOptStrategy</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptLevelSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>CCPosIndRopi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndRwpi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndNoDynInit</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccLang</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCDialect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccAllowVLA</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccStaticDestr</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccCppInlineSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccFloatSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCNoLiteralPool</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptStrategySlave</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCGuardCalls</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccExceptions2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccRTTI2</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>AARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>10</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>AObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AEndian</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>ACaseSensitivity</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacroChars</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnWhat</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnOne</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange1</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange2</name>

+          <state />

+        </option>

+        <option>

+          <name>ADebug</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AltRegisterNames</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ADefines</name>

+          <state />

+        </option>

+        <option>

+          <name>AList</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AListHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AListing</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>Includes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacDefs</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacExps</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacExec</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OnlyAssed</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MultiLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLengthCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLength</name>

+          <state>80</state>

+        </option>

+        <option>

+          <name>TabSpacing</name>

+          <state>8</state>

+        </option>

+        <option>

+          <name>AXRef</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDefines</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefInternal</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDual</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AOutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>ALimitErrorsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ALimitErrorsEdit</name>

+          <state>100</state>

+        </option>

+        <option>

+          <name>AIgnoreStdInclude</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AUserIncludes</name>

+          <state />

+        </option>

+        <option>

+          <name>AExtraOptionsCheckV2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AExtraOptionsV2</name>

+          <state />

+        </option>

+        <option>

+          <name>AsmNoLiteralPool</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>OBJCOPY</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>1</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>OOCOutputFormat</name>

+          <version>3</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OCOutputOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OOCOutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>OOCCommandLineProducer</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCObjCopyEnable</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>CUSTOM</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <extensions />

+        <cmdline />

+        <hasPrio>0</hasPrio>

+      </data>

+    </settings>

+    <settings>

+      <name>BICOMP</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+    <settings>

+      <name>BUILDACTION</name>

+      <archiveVersion>1</archiveVersion>

+      <data>

+        <prebuild />

+        <postbuild />

+      </data>

+    </settings>

+    <settings>

+      <name>ILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>20</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>IlinkLibIOConfig</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>XLinkMisraHandler</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkInputFileSlave</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOutputFile</name>

+          <state>###Unitialized###</state>

+        </option>

+        <option>

+          <name>IlinkDebugInfoEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkKeepSymbols</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySymbol</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySegment</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryAlign</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkConfigDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkMapFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogInitialization</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogModule</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogSection</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogVeneer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile</name>

+          <state>lnk0t.icf</state>

+        </option>

+        <option>

+          <name>IlinkIcfFileSlave</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkSuppressDiags</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsRem</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsWarn</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsErr</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkWarningsAreErrors</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkUseExtraOptions</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkLowLevelInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAutoLibEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAdditionalLibs</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkOverrideProgramEntryLabel</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabelSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabel</name>

+          <state />

+        </option>

+        <option>

+          <name>DoFill</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>FillerByte</name>

+          <state>0xFF</state>

+        </option>

+        <option>

+          <name>FillerStart</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>FillerEnd</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>CrcSize</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcAlign</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcPoly</name>

+          <state>0x11021</state>

+        </option>

+        <option>

+          <name>CrcCompl</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcBitOrder</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcInitialValue</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>DoCrc</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkBE8Slave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkBufferedTerminalOutput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkStdoutInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcFullSize</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIElfToolPostProcess</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogAutoLibSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogRedirSymbols</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogUnusedFragments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcReverseByteOrder</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcUseAsInput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptInline</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsAllow</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsForce</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptMergeDuplSections</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptUseVfe</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptForceVfe</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackAnalysisEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackControlFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkStackCallGraphFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CrcAlgorithm</name>

+          <version>1</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcUnitSize</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkThreadsSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLogCallGraph</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile_AltDefault</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkHeapSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLocaleSelect</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>IARCHIVE</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>0</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>IarchiveInputs</name>

+          <state />

+        </option>

+        <option>

+          <name>IarchiveOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IarchiveOutput</name>

+          <state>###Unitialized###</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>BILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+  </configuration>

+  <group>

+    <name>Applications</name>

+    <file>

+      <name>$PROJ_DIR$\applications\main.c</name>

+    </file>

+  </group>

+  <group>

+    <name>Drivers</name>

+    <file>

+      <name>$PROJ_DIR$\board\board.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\iar\startup_stm32f407xx.s</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>

+    </file>

+  </group>

+  <group>

+    <name>Kernel</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\clock.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\components.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\device.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\idle.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\irq.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\mem.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\object.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\signal.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\thread.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\timer.c</name>

+    </file>

+  </group>

+  <group>

+    <name>CORTEX-M4</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>

+    </file>

+  </group>

+  <group>

+    <name>DeviceDrivers</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>

+    </file>

+  </group>

+  <group>

+    <name>finsh</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>

+    </file>

+  </group>

+  <group>

+    <name>STM32_HAL</name>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dfsdm.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dsi.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_eth.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_irda.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_qspi.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sdram.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_smartcard.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spdifrx.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fmc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c</name>

+    </file>

+  </group>

+</project>

diff --git a/bsp/stm32/stm32f407-armfly-v5/project.eww b/bsp/stm32/stm32f407-armfly-v5/project.eww
new file mode 100644
index 0000000000..c2cb02eb1e
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.eww
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>

+

+<workspace>

+  <project>

+    <path>$WS_DIR$\project.ewp</path>

+  </project>

+  <batchBuild/>

+</workspace>

+

+

diff --git a/bsp/stm32/stm32f407-armfly-v5/project.uvopt b/bsp/stm32/stm32f407-armfly-v5/project.uvopt
new file mode 100644
index 0000000000..b53d69d5df
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.uvopt
@@ -0,0 +1,162 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-armfly-v5/project.uvoptx b/bsp/stm32/stm32f407-armfly-v5/project.uvoptx
new file mode 100644
index 0000000000..f8c4606a9e
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.uvoptx
@@ -0,0 +1,191 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>4</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-armfly-v5/project.uvproj b/bsp/stm32/stm32f407-armfly-v5/project.uvproj
new file mode 100644
index 0000000000..a2c80e0594
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.uvproj
@@ -0,0 +1,1189 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+  <SchemaVersion>1.1</SchemaVersion>
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407ZG</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec />
+          <StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
+          <DeviceId>6105</DeviceId>
+          <RegisterFile>stm32f4xx.h</RegisterFile>
+          <MemoryEnv />
+          <Cmp />
+          <Asm />
+          <Linker />
+          <OHString />
+          <InfinionOptionDll />
+          <SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
+          <SLE66AMisc />
+          <SLE66LinkerMisc />
+          <SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath />
+          <IncludePath />
+          <LibPath />
+          <RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString />
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument />
+          <IncludeLibraryModules />
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU -REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>0</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4 />
+          <pFcarmOut />
+          <pFcarmGrp />
+          <pFcArmRoot />
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName />
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>0</Im1Chk>
+            <Im2Chk>1</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector />
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define>USE_HAL_DRIVER, STM32F407xx</Define>
+              <Undefine />
+              <IncludePath>applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m4;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath />
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase />
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs />
+            <IncludeLibsPath />
+            <Misc> --keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
+            <LinkerInputFile />
+            <DisabledWarnings />
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>startup_stm32f407xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\clock.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\components.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\device.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\idle.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\irq.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mem.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\object.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>signal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\signal.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\thread.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CORTEX-M4</GroupName>
+          <Files>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>pin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ringblk_buf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\shell.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>symbol.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\symbol.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_file.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_file.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>STM32_HAL</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f4xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_adc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cryp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dac_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dcmi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dcmi_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dfsdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dfsdm.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma2d.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dsi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dsi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_eth.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_eth.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ramfunc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_fmpi2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_fmpi2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hash_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hcd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2s.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2s_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_irda.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_irda.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_iwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_lptim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_ltdc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_ltdc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_nand.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_nor.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pccard.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pcd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pcd_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_qspi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_qspi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rng.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rtc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sai.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sai_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sdram.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sdram.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_smartcard.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_smartcard.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_spdifrx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spdifrx.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sram.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_tim_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_wwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_fmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_fsmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_sdmmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_usb.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+</Project>
diff --git a/bsp/stm32/stm32f407-armfly-v5/project.uvprojx b/bsp/stm32/stm32f407-armfly-v5/project.uvprojx
new file mode 100644
index 0000000000..793a467224
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/project.uvprojx
@@ -0,0 +1,753 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407IGTx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32F407IGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F407IGTx$CMSIS\SVD\STM32F40x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4101</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_HAL_DRIVER, STM32F407xx</Define>
+              <Undefine></Undefine>
+              <IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>4</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\clock.c</FilePath>
+            </File>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\components.c</FilePath>
+            </File>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\device.c</FilePath>
+            </File>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\idle.c</FilePath>
+            </File>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
+            </File>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\irq.c</FilePath>
+            </File>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
+            </File>
+            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mem.c</FilePath>
+            </File>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
+            </File>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\object.c</FilePath>
+            </File>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
+            </File>
+            <File>
+              <FileName>signal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\signal.c</FilePath>
+            </File>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\thread.c</FilePath>
+            </File>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f407xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+            </File>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_hwtimer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_hwtimer.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>cpu</GroupName>
+          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>hwtimer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\hwtimer\hwtimer.c</FilePath>
+            </File>
+            <File>
+              <FileName>pin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringblk_buf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\shell.c</FilePath>
+            </File>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
+            </File>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>libc</GroupName>
+          <Files>
+            <File>
+              <FileName>time.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>STM32_HAL</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f4xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cryp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rng.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_tim_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_lptim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-armfly-v5/rtconfig.h b/bsp/stm32/stm32f407-armfly-v5/rtconfig.h
new file mode 100644
index 0000000000..7d83eb4f99
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/rtconfig.h
@@ -0,0 +1,173 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+#define RT_DEBUG
+#define RT_DEBUG_COLOR
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_VER_NUM 0x40000
+#define ARCH_ARM
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_USING_MSH_ONLY
+#define FINSH_ARG_MAX 10
+
+/* Device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
+#define RT_USING_SERIAL
+#define RT_SERIAL_USING_DMA
+#define RT_USING_PIN
+
+/* Using WiFi */
+
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+
+/* Network */
+
+/* Socket abstraction layer */
+
+
+/* light weight TCP/IP stack */
+
+
+/* Modbus master and slave stack */
+
+
+/* AT commands */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* ARM CMSIS */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+
+/* peripheral libraries and drivers */
+
+
+/* miscellaneous packages */
+
+
+/* samples: kernel and components samples */
+
+#define SOC_FAMILY_STM32
+#define SOC_SERIES_STM32F4
+
+/* Hardware Drivers Config */
+
+#define SOC_STM32F407ZG
+
+/* Onboard Peripheral Drivers */
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART1
+
+/* Board extended module Drivers */
+
+
+#endif
diff --git a/bsp/stm32/stm32f407-armfly-v5/rtconfig.py b/bsp/stm32/stm32f407-armfly-v5/rtconfig.py
new file mode 100644
index 0000000000..00d5d737ac
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/rtconfig.py
@@ -0,0 +1,150 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'C:\Users\XXYYZZ'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iar'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+
+    CXXFLAGS = CFLAGS
+    
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)
diff --git a/bsp/stm32/stm32f407-armfly-v5/template.ewp b/bsp/stm32/stm32f407-armfly-v5/template.ewp
new file mode 100644
index 0000000000..21c66ca0d0
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.ewp
@@ -0,0 +1,2031 @@
+<?xml version="1.0" encoding="UTF-8"?>

+<project>

+    <fileVersion>3</fileVersion>

+    <configuration>

+        <name>rt-thread</name>

+        <toolchain>

+            <name>ARM</name>

+        </toolchain>

+        <debug>1</debug>

+        <settings>

+            <name>General</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <version>29</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>ExePath</name>

+                    <state>build\iar\Exe</state>

+                </option>

+                <option>

+                    <name>ObjPath</name>

+                    <state>build\iar\Obj</state>

+                </option>

+                <option>

+                    <name>ListPath</name>

+                    <state>build\iar\List</state>

+                </option>

+                <option>

+                    <name>GEndianMode</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>Input description</name>

+                    <state>Automatic choice of formatter, without multibyte support.</state>

+                </option>

+                <option>

+                    <name>Output description</name>

+                    <state>Automatic choice of formatter, without multibyte support.</state>

+                </option>

+                <option>

+                    <name>GOutputBinary</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCoreOrChip</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelect</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelectSlave</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>RTDescription</name>

+                    <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>

+                </option>

+                <option>

+                    <name>OGProductVersion</name>

+                    <state>6.30.6.53380</state>

+                </option>

+                <option>

+                    <name>OGLastSavedByProductVersion</name>

+                    <state>8.11.3.13977</state>

+                </option>

+                <option>

+                    <name>GeneralEnableMisra</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVerbose</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGChipSelectEditMenu</name>

+                    <state>STM32F407ZG	ST STM32F407ZG</state>

+                </option>

+                <option>

+                    <name>GenLowLevelInterface</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GEndianModeBE</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OGBufferedTerminalOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenStdoutInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>RTConfigPath2</name>

+                    <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>

+                </option>

+                <option>

+                    <name>GBECoreSlave</name>

+                    <version>25</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>OGUseCmsis</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGUseCmsisDspLib</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibThreads</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CoreVariant</name>

+                    <version>25</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>GFPUDeviceSlave</name>

+                    <state>STM32F407ZG	ST STM32F407ZG</state>

+                </option>

+                <option>

+                    <name>FPU2</name>

+                    <version>0</version>

+                    <state>4</state>

+                </option>

+                <option>

+                    <name>NrRegs</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>NEON</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUCoreSlave2</name>

+                    <version>25</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>OGCMSISPackSelectDevice</name>

+                </option>

+                <option>

+                    <name>OgLibHeap</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGLibAdditionalLocale</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenLocaleTags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GenLocaleDisplayOnly</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DSPExtension</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>ICCARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>34</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>CCOptimizationNoSizeConstraints</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCPreprocFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocComments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMnemonics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMessages</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagSuppress</name>

+                    <state>Pa050</state>

+                </option>

+                <option>

+                    <name>CCDiagRemark</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagWarning</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagError</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCAllowList</name>

+                    <version>1</version>

+                    <state>00000000</state>

+                </option>

+                <option>

+                    <name>CCDebugInfo</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IEndianMode</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IExtraOptionsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLangConformance</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCSignedPlainChar</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCRequirePrototypes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagWarnAreErr</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCompilerRuntimeInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OutputFile</name>

+                    <state>$FILE_BNAME$.o</state>

+                </option>

+                <option>

+                    <name>CCLibConfigHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>PreInclude</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CompilerMisraOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCIncludePath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCStdIncCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCodeSection</name>

+                    <state>.text</state>

+                </option>

+                <option>

+                    <name>IProcessorMode2</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptLevel</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptStrategy</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptLevelSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>CCPosIndRopi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndRwpi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndNoDynInit</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccLang</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCDialect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccAllowVLA</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccStaticDestr</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccCppInlineSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccFloatSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptStrategySlave</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCGuardCalls</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccExceptions2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccRTTI2</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>AARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>10</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>AObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AEndian</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>ACaseSensitivity</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacroChars</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnWhat</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnOne</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange1</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ADebug</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AltRegisterNames</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ADefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AList</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AListHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AListing</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>Includes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacDefs</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacExps</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacExec</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OnlyAssed</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MultiLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLengthCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLength</name>

+                    <state>80</state>

+                </option>

+                <option>

+                    <name>TabSpacing</name>

+                    <state>8</state>

+                </option>

+                <option>

+                    <name>AXRef</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDefines</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefInternal</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDual</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AOutputFile</name>

+                    <state>$FILE_BNAME$.o</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsEdit</name>

+                    <state>100</state>

+                </option>

+                <option>

+                    <name>AIgnoreStdInclude</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AUserIncludes</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AExtraOptionsCheckV2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AExtraOptionsV2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AsmNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>OBJCOPY</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>1</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>OOCOutputFormat</name>

+                    <version>3</version>

+                    <state>3</state>

+                </option>

+                <option>

+                    <name>OCOutputOverride</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCOutputFile</name>

+                    <state>../../../rtthread.bin</state>

+                </option>

+                <option>

+                    <name>OOCCommandLineProducer</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCObjCopyEnable</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>CUSTOM</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <extensions></extensions>

+                <cmdline></cmdline>

+                <hasPrio>0</hasPrio>

+            </data>

+        </settings>

+        <settings>

+            <name>BICOMP</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+        <settings>

+            <name>BUILDACTION</name>

+            <archiveVersion>1</archiveVersion>

+            <data>

+                <prebuild></prebuild>

+                <postbuild></postbuild>

+            </data>

+        </settings>

+        <settings>

+            <name>ILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>20</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>IlinkLibIOConfig</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>XLinkMisraHandler</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkInputFileSlave</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOutputFile</name>

+                    <state>project.out</state>

+                </option>

+                <option>

+                    <name>IlinkDebugInfoEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkKeepSymbols</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySymbol</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySegment</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryAlign</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkConfigDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkMapFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogInitialization</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogModule</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogSection</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogVeneer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfOverride</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile</name>

+                    <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFileSlave</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkSuppressDiags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsRem</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsWarn</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsErr</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkWarningsAreErrors</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkUseExtraOptions</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkLowLevelInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAutoLibEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAdditionalLibs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkOverrideProgramEntryLabel</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabelSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabel</name>

+                    <state>__iar_program_start</state>

+                </option>

+                <option>

+                    <name>DoFill</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>FillerByte</name>

+                    <state>0xFF</state>

+                </option>

+                <option>

+                    <name>FillerStart</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>FillerEnd</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>CrcSize</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcAlign</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcPoly</name>

+                    <state>0x11021</state>

+                </option>

+                <option>

+                    <name>CrcCompl</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcBitOrder</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcInitialValue</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>DoCrc</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkBE8Slave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkBufferedTerminalOutput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkStdoutInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcFullSize</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIElfToolPostProcess</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogAutoLibSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogRedirSymbols</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogUnusedFragments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcReverseByteOrder</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcUseAsInput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptInline</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsAllow</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsForce</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptMergeDuplSections</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptUseVfe</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptForceVfe</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackAnalysisEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackControlFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkStackCallGraphFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CrcAlgorithm</name>

+                    <version>1</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcUnitSize</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkThreadsSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLogCallGraph</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile_AltDefault</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkHeapSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLocaleSelect</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>IARCHIVE</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>0</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>IarchiveInputs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IarchiveOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IarchiveOutput</name>

+                    <state>###Unitialized###</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>BILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+    </configuration>

+    <configuration>

+        <name>Release</name>

+        <toolchain>

+            <name>ARM</name>

+        </toolchain>

+        <debug>0</debug>

+        <settings>

+            <name>General</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <version>29</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>ExePath</name>

+                    <state>Release\Exe</state>

+                </option>

+                <option>

+                    <name>ObjPath</name>

+                    <state>Release\Obj</state>

+                </option>

+                <option>

+                    <name>ListPath</name>

+                    <state>Release\List</state>

+                </option>

+                <option>

+                    <name>GEndianMode</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>Input description</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>Output description</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GOutputBinary</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCoreOrChip</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelect</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelectSlave</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>RTDescription</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>OGProductVersion</name>

+                    <state>6.30.6.53380</state>

+                </option>

+                <option>

+                    <name>OGLastSavedByProductVersion</name>

+                    <state>8.11.3.13977</state>

+                </option>

+                <option>

+                    <name>GeneralEnableMisra</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVerbose</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGChipSelectEditMenu</name>

+                    <state>Default	None</state>

+                </option>

+                <option>

+                    <name>GenLowLevelInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GEndianModeBE</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGBufferedTerminalOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenStdoutInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>RTConfigPath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GBECoreSlave</name>

+                    <version>25</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OGUseCmsis</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGUseCmsisDspLib</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibThreads</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CoreVariant</name>

+                    <version>25</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUDeviceSlave</name>

+                    <state>Default	None</state>

+                </option>

+                <option>

+                    <name>FPU2</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>NrRegs</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>NEON</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUCoreSlave2</name>

+                    <version>25</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCMSISPackSelectDevice</name>

+                </option>

+                <option>

+                    <name>OgLibHeap</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGLibAdditionalLocale</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenLocaleTags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GenLocaleDisplayOnly</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DSPExtension</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>ICCARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>34</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>CCOptimizationNoSizeConstraints</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDefines</name>

+                </option>

+                <option>

+                    <name>CCPreprocFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocComments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMnemonics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMessages</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagSuppress</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagRemark</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagWarning</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagError</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCAllowList</name>

+                    <version>1</version>

+                    <state>11111110</state>

+                </option>

+                <option>

+                    <name>CCDebugInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IEndianMode</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IExtraOptionsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLangConformance</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCSignedPlainChar</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCRequirePrototypes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagWarnAreErr</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCompilerRuntimeInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLibConfigHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>PreInclude</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CompilerMisraOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCIncludePath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCStdIncCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCodeSection</name>

+                    <state>.text</state>

+                </option>

+                <option>

+                    <name>IProcessorMode2</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptLevel</name>

+                    <state>3</state>

+                </option>

+                <option>

+                    <name>CCOptStrategy</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptLevelSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>CCPosIndRopi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndRwpi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndNoDynInit</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccLang</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCDialect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccAllowVLA</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccStaticDestr</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccCppInlineSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccFloatSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptStrategySlave</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCGuardCalls</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccExceptions2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccRTTI2</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>AARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>10</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>AObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AEndian</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>ACaseSensitivity</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacroChars</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnWhat</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnOne</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange1</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ADebug</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AltRegisterNames</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ADefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AList</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AListHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AListing</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>Includes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacDefs</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacExps</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacExec</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OnlyAssed</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MultiLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLengthCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLength</name>

+                    <state>80</state>

+                </option>

+                <option>

+                    <name>TabSpacing</name>

+                    <state>8</state>

+                </option>

+                <option>

+                    <name>AXRef</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDefines</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefInternal</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDual</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AOutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ALimitErrorsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsEdit</name>

+                    <state>100</state>

+                </option>

+                <option>

+                    <name>AIgnoreStdInclude</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AUserIncludes</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AExtraOptionsCheckV2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AExtraOptionsV2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AsmNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>OBJCOPY</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>1</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>OOCOutputFormat</name>

+                    <version>3</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OCOutputOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OOCOutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>OOCCommandLineProducer</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCObjCopyEnable</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>CUSTOM</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <extensions></extensions>

+                <cmdline></cmdline>

+                <hasPrio>0</hasPrio>

+            </data>

+        </settings>

+        <settings>

+            <name>BICOMP</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+        <settings>

+            <name>BUILDACTION</name>

+            <archiveVersion>1</archiveVersion>

+            <data>

+                <prebuild></prebuild>

+                <postbuild></postbuild>

+            </data>

+        </settings>

+        <settings>

+            <name>ILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>20</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>IlinkLibIOConfig</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>XLinkMisraHandler</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkInputFileSlave</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOutputFile</name>

+                    <state>###Unitialized###</state>

+                </option>

+                <option>

+                    <name>IlinkDebugInfoEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkKeepSymbols</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySymbol</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySegment</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryAlign</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkConfigDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkMapFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogInitialization</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogModule</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogSection</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogVeneer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile</name>

+                    <state>lnk0t.icf</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFileSlave</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkSuppressDiags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsRem</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsWarn</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsErr</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkWarningsAreErrors</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkUseExtraOptions</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkLowLevelInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAutoLibEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAdditionalLibs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkOverrideProgramEntryLabel</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabelSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabel</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DoFill</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>FillerByte</name>

+                    <state>0xFF</state>

+                </option>

+                <option>

+                    <name>FillerStart</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>FillerEnd</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>CrcSize</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcAlign</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcPoly</name>

+                    <state>0x11021</state>

+                </option>

+                <option>

+                    <name>CrcCompl</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcBitOrder</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcInitialValue</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>DoCrc</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkBE8Slave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkBufferedTerminalOutput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkStdoutInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcFullSize</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIElfToolPostProcess</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogAutoLibSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogRedirSymbols</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogUnusedFragments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcReverseByteOrder</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcUseAsInput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptInline</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsAllow</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsForce</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptMergeDuplSections</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptUseVfe</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptForceVfe</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackAnalysisEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackControlFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkStackCallGraphFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CrcAlgorithm</name>

+                    <version>1</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcUnitSize</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkThreadsSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLogCallGraph</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile_AltDefault</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkHeapSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLocaleSelect</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>IARCHIVE</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>0</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>IarchiveInputs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IarchiveOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IarchiveOutput</name>

+                    <state>###Unitialized###</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>BILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+    </configuration>

+</project>

diff --git a/bsp/stm32/stm32f407-armfly-v5/template.eww b/bsp/stm32/stm32f407-armfly-v5/template.eww
new file mode 100644
index 0000000000..bd036bb4c9
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.eww
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>

+

+<workspace>

+  <project>

+    <path>$WS_DIR$\template.ewp</path>

+  </project>

+  <batchBuild/>

+</workspace>

+

+

diff --git a/bsp/stm32/stm32f407-armfly-v5/template.uvopt b/bsp/stm32/stm32f407-armfly-v5/template.uvopt
new file mode 100644
index 0000000000..5cc5956b4f
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.uvopt
@@ -0,0 +1,199 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <Books>
+        <Book>
+          <Number>0</Number>
+          <Title>Datasheet</Title>
+          <Path>DATASHTS\ST\STM32F4xx\DM00037051.pdf</Path>
+        </Book>
+        <Book>
+          <Number>1</Number>
+          <Title>Reference Manual</Title>
+          <Path>DATASHTS\ST\STM32F4xx\DM00031020.pdf</Path>
+        </Book>
+        <Book>
+          <Number>2</Number>
+          <Title>Technical Reference Manual</Title>
+          <Path>datashts\arm\cortex_m4\r0p1\DDI0439C_CORTEX_M4_R0P1_TRM.PDF</Path>
+        </Book>
+        <Book>
+          <Number>3</Number>
+          <Title>Generic User Guide</Title>
+          <Path>datashts\arm\cortex_m4\r0p1\DUI0553A_CORTEX_M4_DGUG.PDF</Path>
+        </Book>
+      </Books>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-armfly-v5/template.uvoptx b/bsp/stm32/stm32f407-armfly-v5/template.uvoptx
new file mode 100644
index 0000000000..904af41f77
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.uvoptx
@@ -0,0 +1,187 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>24000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-armfly-v5/template.uvproj b/bsp/stm32/stm32f407-armfly-v5/template.uvproj
new file mode 100644
index 0000000000..73d0b32956
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.uvproj
@@ -0,0 +1,438 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407IG</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
+          <DeviceId>6104</DeviceId>
+          <RegisterFile>stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU -REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4101</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>1</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-armfly-v5/template.uvprojx b/bsp/stm32/stm32f407-armfly-v5/template.uvprojx
new file mode 100644
index 0000000000..4c3ec18c73
--- /dev/null
+++ b/bsp/stm32/stm32f407-armfly-v5/template.uvprojx
@@ -0,0 +1,411 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407IGTx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.2.14.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32F407IGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F407IGTx$CMSIS\SVD\STM32F40x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4101</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <ClangAsOpt>4</ClangAsOpt>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source Group 1</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/CubeMX_Config.ioc
index 02fb59d94c..8115bf0687 100644
--- a/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/CubeMX_Config.ioc
@@ -136,6 +136,12 @@ NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Device_Only
@@ -154,10 +160,12 @@ PA5.Locked=true
 PA5.Signal=COMP_DAC2_group
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PB13.Mode=Full_Duplex_Master
diff --git a/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 08cc9f847e..34dd1ba7c7 100644
--- a/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f407-atk-explorer/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -741,7 +741,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -768,7 +768,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
diff --git a/bsp/stm32/stm32f407-robomaster-c/.config b/bsp/stm32/stm32f407-robomaster-c/.config
new file mode 100644
index 0000000000..4d8ccbfd5d
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/.config
@@ -0,0 +1,564 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=1000
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+# CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_VER_NUM=0x40004
+CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M4=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V2 is not set
+CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+# CONFIG_RT_USING_LIBC is not set
+# CONFIG_RT_USING_PTHREADS is not set
+CONFIG_RT_LIBC_USING_TIME=y
+CONFIG_RT_LIBC_FIXED_TIMEZONE=8
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_RT_LINK is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
+# CONFIG_PKG_USING_AGILE_MODBUS is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_PDFGEN is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
+# CONFIG_PKG_USING_DEVMEM is not set
+# CONFIG_PKG_USING_MEM_SANDBOX is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
+# CONFIG_PKG_USING_EVENT_RECORDER is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_STM32WB55_SDK is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+# CONFIG_PKG_USING_LIBNFC is not set
+# CONFIG_PKG_USING_MFOC is not set
+# CONFIG_PKG_USING_TMC51XX is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
+# CONFIG_PKG_USING_NAXOS is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# entertainment: terminal games and other interesting software packages
+#
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_DONUT is not set
+# CONFIG_PKG_USING_ACLOCK is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
+CONFIG_SOC_FAMILY_STM32=y
+CONFIG_SOC_SERIES_STM32F4=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_STM32F407IG=y
+
+#
+# Onboard Peripheral Drivers
+#
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART1=y
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_RNG is not set
+# CONFIG_BSP_USING_UDID is not set
+
+#
+# Board extended module Drivers
+#
diff --git a/bsp/stm32/stm32f407-robomaster-c/.gitignore b/bsp/stm32/stm32f407-robomaster-c/.gitignore
new file mode 100644
index 0000000000..7221bde019
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/.gitignore
@@ -0,0 +1,42 @@
+*.pyc
+*.map
+*.dblite
+*.elf
+*.bin
+*.hex
+*.axf
+*.exe
+*.pdb
+*.idb
+*.ilk
+*.old
+build
+Debug
+documentation/html
+packages/
+*~
+*.o
+*.obj
+*.out
+*.bak
+*.dep
+*.lib
+*.i
+*.d
+.DS_Stor*
+.config 3
+.config 4
+.config 5
+Midea-X1
+*.uimg
+GPATH
+GRTAGS
+GTAGS
+.vscode
+JLinkLog.txt
+JLinkSettings.ini
+DebugConfig/
+RTE/
+settings/
+*.uvguix*
+cconfig.h
diff --git a/bsp/stm32/stm32f407-robomaster-c/Kconfig b/bsp/stm32/stm32f407-robomaster-c/Kconfig
new file mode 100644
index 0000000000..8cbc7b71a8
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/Kconfig
@@ -0,0 +1,21 @@
+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+ 
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"
diff --git a/bsp/stm32/stm32f407-robomaster-c/README.md b/bsp/stm32/stm32f407-robomaster-c/README.md
new file mode 100644
index 0000000000..c4f2eceb48
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/README.md
@@ -0,0 +1,120 @@
+# STM32F407 Robomaster 开发板C型 BSP 说明
+
+## 简介
+
+本文档为 STM32F407 Robomaster 开发板C型 的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+Robomaster 开发板C型 是大疆创新科技有限公司推出的一款基于 ARM Cortex-M4 内核的开发板。开发板主控芯片为 STM32F407IGH6TR，最高主频为 168Mhz，拥有丰富的扩展接口和通信接口。板载IMU传感器，可配合RoboMaster出品的M3508、 M2006直流无刷减速电机、UWB模块以及妙算等产品使用，亦可配合DJI飞控SDK使用。
+
+开发板外观如下图所示：
+
+<img src="figures/board.png" alt="image-20210630111114846" style="zoom:50%;" />
+
+> 开发板 C 型具有如下外设：
+
+该开发板常用 **板载资源** 如下：
+
+- MCU: STM32F407IGH6TR, 168MHz Freq, 1024KB FLASH, 192KB RAM(含64KB CCM RAM)。
+- 调试接口：SWD
+- 常用外设：用户自定义 LED、按键、蜂鸣器、六轴惯性测量单元和磁力计、电压检测 ADC。
+- 常用接口：5V 接口、BOOT 配置接口、micro USB 接口、可配置 I/O 接口、UART 接口、CAN 总线接口、PWM 接口、DBUS接口、数字摄像头 FPC 接口。
+
+开发板的用户手册：[RoboMaster 开发板 C 型用户手册.pdf](https://rm-static.djicdn.com/tem/35228/RoboMaster%20%20%E5%BC%80%E5%8F%91%E6%9D%BF%20C%20%E5%9E%8B%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C.pdf)
+
+开发板更多详细信息请参考 RoboMaster官网：[RoboMaster开发板 C 型](https://www.robomaster.com/zh-CN/products/components/general/development-board-type-c/info) 
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下：
+
+| **板载外设** | **支持情况** | **备注**                             |
+| :----------- | :----------: | :----------------------------------- |
+| BMI088       |   暂不支持   | 六轴惯性测量单元（有软件包）            |
+| IST8310      |   暂不支持   | 三轴磁力计                           |
+| **片上外设** | **支持情况** | **备注**                             |
+| GPIO         |     支持     | PA0, PA1... PH1 ---> PIN: 0, 1...144 |
+| UART         |     支持     | UART1,  UART3(DBUS),  UART6          |
+| CAN          |   下阶段支持   | CAN1, CAN2                           |
+| PWM          |   下阶段支持   |                                      |
+| SPI          |   下阶段支持   | BMI088, 用户SPI接口 |
+| I2C          |   下阶段支持   | IST8310, 用户 I2C 接口 |
+| USB          |   暂不支持   |                                      |
+| **扩展模块** | **支持情况** | **备注**                             |
+| 无           |              |                                      |
+
+## 使用说明
+
+使用说明分为如下两个章节：
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用[ENV 工具](https://docs.rt-thread.org/#/development-tools/env/env)对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+将准备好的 ST-Link/JLink/DapLink 与开发板连接，开发板上的调试接口为 MX1.25 4Pin。C板上没有电源指示灯，供电可以选用：调试接口的 3.3V 输入，micro USB 接口供电，XT30 电源输入。 
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 ST-LINK 下载程序，点击下载按钮即可下载程序到开发板。
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，LED 会以蓝光进行周期性闪烁。
+
+此 BSP 的 FinSH 默认使用串口 1 (C板外壳上标有UART2的4Pin接口)，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.4 build Jun 30 2021
+ 2006 - 2021 Copyright by rt-thread team
+msh >
+```
+> 终端工具推荐使用 [MobaXterm](https://mobaxterm.mobatek.net/) 或 [Xshell](https://www.netsarang.com/en/free-for-home-school/)，均有免费的个人版本
+
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口 2 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下：
+
+1. 在 BSP 下打开 env 工具。
+
+2. 输入 `menuconfig` 命令配置工程，配置好之后保存退出。
+
+3. 输入 `pkgs --update` 命令更新软件包。
+
+4. 输入 `scons --target=mdk4/mdk5/iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32 系列 BSP 外设驱动使用教程. md)。
+
+## 注意事项
+
+- 部分外设需通过 XT30 或 USB 接口供电才能正常使用，包括 CAN、舵机5V供电、IMU恒温电路等
+- 目前 scons 支持生成 cmake 配置文件，可以使用 CLion 进行 C板 的程序开发，推荐同学们尝试。详细步骤可参见：[在 Clion 中调试 rt-thread 工程](https://club.rt-thread.org/ask/article/2840.html)，C板的 openOCD 配置文件推荐选用 `stm32f4discovery.cfg` ，并将该配置文件的最后一行改为 `reset_config none`
+
+## 联系人信息
+
+维护人:
+
+- [crazt](https://github.com/CraztTnspt) ，邮箱：<[email protected]>
\ No newline at end of file
diff --git a/bsp/stm32/stm32f407-robomaster-c/SConscript b/bsp/stm32/stm32f407-robomaster-c/SConscript
new file mode 100644
index 0000000000..20f7689c53
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/SConscript
@@ -0,0 +1,15 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')
diff --git a/bsp/stm32/stm32f407-robomaster-c/SConstruct b/bsp/stm32/stm32f407-robomaster-c/SConstruct
new file mode 100644
index 0000000000..945cb55a52
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/SConstruct
@@ -0,0 +1,60 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/libraries'):
+    libraries_path_prefix = SDK_ROOT + '/libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+stm32_library = 'STM32F4xx_HAL'
+rtconfig.BSP_LIBRARY_TYPE = stm32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
+
+# include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)
diff --git a/bsp/stm32/stm32f407-robomaster-c/applications/SConscript b/bsp/stm32/stm32f407-robomaster-c/applications/SConscript
new file mode 100644
index 0000000000..1381e63e13
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/applications/SConscript
@@ -0,0 +1,10 @@
+import rtconfig
+from building import *
+
+cwd     = GetCurrentDir()
+CPPPATH = [cwd, str(Dir('#'))]
+src     = Glob('*.c')
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/stm32/stm32f407-robomaster-c/applications/main.c b/bsp/stm32/stm32f407-robomaster-c/applications/main.c
new file mode 100644
index 0000000000..a4e03550f6
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/applications/main.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2021-06-30     crazt        modify for robomaster C board
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* defined the LED Blue pin: PB1 */
+#define LED_B_PIN    GET_PIN(H, 10)
+
+int main(void)
+{
+    int count = 1;
+    /* set LED Blue pin mode to output */
+    rt_pin_mode(LED_B_PIN, PIN_MODE_OUTPUT);
+
+    while (count++)
+    {
+        rt_pin_write(LED_B_PIN, PIN_HIGH);
+        rt_thread_mdelay(500);
+        rt_pin_write(LED_B_PIN, PIN_LOW);
+        rt_thread_mdelay(500);
+    }
+
+    return RT_EOK;
+}
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/.mxproject
new file mode 100644
index 0000000000..98680a9f77
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/.mxproject
@@ -0,0 +1,14 @@
+[PreviousLibFiles]
+LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
+
+[PreviousUsedKeilFiles]
+SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\\Src/system_stm32f4xx.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;..\Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.c;..\\Src/system_stm32f4xx.c;..\Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;;
+HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc;
+CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
+[PreviousGenFiles]
+HeaderPath=C:/CraztDoc/RTT/github_repo/rt-thread/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc
+HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h;
+SourcePath=C:/CraztDoc/RTT/github_repo/rt-thread/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src
+SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c;
+
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/CubeMX_Config.ioc
new file mode 100644
index 0000000000..f7c753af0a
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/CubeMX_Config.ioc
@@ -0,0 +1,120 @@
+#MicroXplorer Configuration settings - do not modify
+File.Version=6
+GPIO.groupedBy=
+KeepUserPlacement=false
+Mcu.Family=STM32F4
+Mcu.IP0=NVIC
+Mcu.IP1=RCC
+Mcu.IP2=SYS
+Mcu.IP3=USART1
+Mcu.IPNb=4
+Mcu.Name=STM32F407I(E-G)Hx
+Mcu.Package=UFBGA176
+Mcu.Pin0=PA14
+Mcu.Pin1=PA13
+Mcu.Pin2=PB7
+Mcu.Pin3=PA9
+Mcu.Pin4=PH0-OSC_IN
+Mcu.Pin5=PH1-OSC_OUT
+Mcu.Pin6=VP_SYS_VS_Systick
+Mcu.PinsNb=7
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F407IGHx
+MxCube.Version=6.1.2
+MxDb.Version=DB.6.0.10
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA13.Mode=Serial_Wire
+PA13.Signal=SYS_JTMS-SWDIO
+PA14.Mode=Serial_Wire
+PA14.Signal=SYS_JTCK-SWCLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PB7.GPIOParameters=GPIO_PuPd
+PB7.GPIO_PuPd=GPIO_PULLUP
+PB7.Mode=Asynchronous
+PB7.Signal=USART1_RX
+PH0-OSC_IN.Mode=HSE-External-Oscillator
+PH0-OSC_IN.Signal=RCC_OSC_IN
+PH1-OSC_OUT.Mode=HSE-External-Oscillator
+PH1-OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.CurrentBGAView=Top
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F407IGHx
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.25.2
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=0
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=CubeMX_Config.ioc
+ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=MDK-ARM V5
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false
+RCC.48MHZClocksFreq_Value=84000000
+RCC.AHBFreq_Value=168000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV4
+RCC.APB1Freq_Value=42000000
+RCC.APB1TimFreq_Value=84000000
+RCC.APB2CLKDivider=RCC_HCLK_DIV2
+RCC.APB2Freq_Value=84000000
+RCC.APB2TimFreq_Value=168000000
+RCC.CortexFreq_Value=168000000
+RCC.EthernetFreq_Value=168000000
+RCC.FCLKCortexFreq_Value=168000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=168000000
+RCC.HSE_VALUE=12000000
+RCC.HSI_VALUE=16000000
+RCC.I2SClocksFreq_Value=192000000
+RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQCLKFreq_Value,PLLSourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
+RCC.LSE_VALUE=32768
+RCC.LSI_VALUE=32000
+RCC.MCO2PinFreq_Value=168000000
+RCC.PLLCLKFreq_Value=168000000
+RCC.PLLM=6
+RCC.PLLN=168
+RCC.PLLQCLKFreq_Value=84000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.RTCFreq_Value=32000
+RCC.RTCHSEDivFreq_Value=6000000
+RCC.SYSCLKFreq_VALUE=168000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.VCOI2SOutputFreq_Value=384000000
+RCC.VCOInputFreq_Value=2000000
+RCC.VCOOutputFreq_Value=336000000
+RCC.VcooutputI2S=192000000
+USART1.IPParameters=VirtualMode
+USART1.VirtualMode=VM_ASYNC
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=custom
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/main.h
new file mode 100644
index 0000000000..b905d54bd5
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/main.h
@@ -0,0 +1,71 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
new file mode 100644
index 0000000000..5986f8f9c9
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
@@ -0,0 +1,486 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+  /* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_CAN_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_DAC_MODULE_ENABLED   */
+/* #define HAL_DCMI_MODULE_ENABLED   */
+/* #define HAL_DMA2D_MODULE_ENABLED   */
+/* #define HAL_ETH_MODULE_ENABLED   */
+/* #define HAL_NAND_MODULE_ENABLED   */
+/* #define HAL_NOR_MODULE_ENABLED   */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED   */
+/* #define HAL_SDRAM_MODULE_ENABLED   */
+/* #define HAL_HASH_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_LTDC_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SAI_MODULE_ENABLED   */
+/* #define HAL_SD_MODULE_ENABLED   */
+/* #define HAL_MMC_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_HCD_MODULE_ENABLED   */
+/* #define HAL_DSI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_QSPI_MODULE_ENABLED   */
+/* #define HAL_CEC_MODULE_ENABLED   */
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED   */
+/* #define HAL_DFSDM_MODULE_ENABLED   */
+/* #define HAL_LPTIM_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE            ((uint32_t)3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_it.h b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_it.h
new file mode 100644
index 0000000000..e80dbbd8c1
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_it.h
@@ -0,0 +1,69 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/main.c
new file mode 100644
index 0000000000..3df243a8fa
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/main.c
@@ -0,0 +1,233 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+UART_HandleTypeDef huart1;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART1_UART_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART1_UART_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 6;
+  RCC_OscInitStruct.PLL.PLLN = 168;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
new file mode 100644
index 0000000000..f2ac99095c
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -0,0 +1,159 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f4xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspInit 0 */
+
+  /* USER CODE END USART1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**USART1 GPIO Configuration
+    PB7     ------> USART1_RX
+    PA9     ------> USART1_TX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_7;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_9;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART1_MspInit 1 */
+
+  /* USER CODE END USART1_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+  if(huart->Instance==USART1)
+  {
+  /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+  /* USER CODE END USART1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART1_CLK_DISABLE();
+
+    /**USART1 GPIO Configuration
+    PB7     ------> USART1_RX
+    PA9     ------> USART1_TX
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
+
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9);
+
+  /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+  /* USER CODE END USART1_MspDeInit 1 */
+  }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_it.c b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_it.c
new file mode 100644
index 0000000000..fe4ffc9dbf
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_it.c
@@ -0,0 +1,205 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f4xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+  while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F4xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f4xx.s).                    */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/system_stm32f4xx.c b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/system_stm32f4xx.c
new file mode 100644
index 0000000000..449d1d9c0a
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/system_stm32f4xx.c
@@ -0,0 +1,727 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */
+  GPIOH->PUPDR   = 0x00000000;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */
+  GPIOI->PUPDR   = 0x00000000;
+
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0];
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp);
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */
+  GPIOH->PUPDR   = 0x00000000;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0];
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */
+  (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/Kconfig b/bsp/stm32/stm32f407-robomaster-c/board/Kconfig
new file mode 100644
index 0000000000..cf0200cbaa
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/Kconfig
@@ -0,0 +1,44 @@
+menu "Hardware Drivers Config"
+
+config SOC_STM32F407IG
+    bool
+    select SOC_SERIES_STM32F4
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+        
+    source "../libraries/HAL_Drivers/Kconfig"    
+    
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+ 
+endmenu
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/SConscript b/bsp/stm32/stm32f407-robomaster-c/board/SConscript
new file mode 100644
index 0000000000..091f29472a
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/SConscript
@@ -0,0 +1,37 @@
+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+CubeMX_Config/Src/stm32f4xx_hal_msp.c
+''')
+
+path =  [cwd]
+path += [cwd + '/CubeMX_Config/Inc']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f407xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f407xx.s']
+
+# STM32F405xx) || STM32F415xx) || STM32F407xx) || STM32F417xx)
+# STM32F427xx) || STM32F437xx) || STM32F429xx) || STM32F439xx)
+# STM32F401xC) || STM32F401xE) || STM32F410Tx) || STM32F410Cx)
+# STM32F410Rx) || STM32F411xE) || STM32F446xx) || STM32F469xx)
+# STM32F479xx) || STM32F412Cx) || STM32F412Rx) || STM32F412Vx)
+# STM32F412Zx) || STM32F413xx) || STM32F423xx)
+# You can select chips from the list above
+CPPDEFINES = ['STM32F407xx']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/board.c b/bsp/stm32/stm32f407-robomaster-c/board/board.c
new file mode 100644
index 0000000000..d544465866
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/board.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2021-06-30     crazt        modify for robomaster C board
+ */
+
+#include "board.h"
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 6;
+  RCC_OscInitStruct.PLL.PLLN = 168;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/board.h b/bsp/stm32/stm32f407-robomaster-c/board/board.h
new file mode 100644
index 0000000000..25e4852c4c
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/board.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-5      SummerGift   first version
+ * 2021-06-30     crazt        modify for robomaster C board
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include <stm32f4xx.h>
+#include "drv_common.h"
+#include "drv_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM32_FLASH_START_ADRESS     ((uint32_t)0x08000000)
+#define STM32_FLASH_SIZE             (1024 * 1024)
+#define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
+
+#define STM32_SRAM_SIZE           128
+#define STM32_SRAM_END            (0x20000000 + STM32_SRAM_SIZE * 1024)
+
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN      (&__bss_end)
+#endif
+
+#define HEAP_END        STM32_SRAM_END
+
+void SystemClock_Config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.icf b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.icf
new file mode 100644
index 0000000000..067691151f
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.icf
@@ -0,0 +1,28 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/

+/*-Editor annotation file-*/

+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */

+/*-Specials-*/

+define symbol __ICFEDIT_intvec_start__ = 0x08000000;

+/*-Memory Regions-*/

+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;

+define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;

+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;

+define symbol __ICFEDIT_region_RAM_end__   = 0x2001FFFF;

+/*-Sizes-*/

+define symbol __ICFEDIT_size_cstack__ = 0x0400;

+define symbol __ICFEDIT_size_heap__   = 0x0000;

+/**** End of ICF editor section. ###ICF###*/

+

+define memory mem with size = 4G;

+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];

+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];

+

+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };

+

+initialize by copy { readwrite };

+do not initialize  { section .noinit };

+

+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };

+

+place in ROM_region   { readonly };

+place in RAM_region   { readwrite, last block CSTACK};

diff --git a/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.lds b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.lds
new file mode 100644
index 0000000000..50169db320
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.lds
@@ -0,0 +1,157 @@
+/*
+ * linker script for STM32F4xx with GNU ld
+ * bernard.xiong 2009-10-14
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */
+    RAM (rw) : ORIGIN = 0x20000000, LENGTH =  128k /* 128K sram */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x200;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4);
+
+        _etext = .;
+    } > ROM = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > ROM
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >RAM
+
+    .stack : 
+    {
+        . = ALIGN(4);
+        _sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        
+        *(.bss.init)
+    } > RAM
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}
diff --git a/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.sct b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.sct
new file mode 100644
index 0000000000..0d7c47992d
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/board/linker_scripts/link.sct
@@ -0,0 +1,15 @@
+; *************************************************************

+; *** Scatter-Loading Description File generated by uVision ***

+; *************************************************************

+

+LR_IROM1 0x08000000 0x00100000  {    ; load region size_region

+  ER_IROM1 0x08000000 0x00100000  {  ; load address = execution address

+   *.o (RESET, +First)

+   *(InRoot$$Sections)

+   .ANY (+RO)

+  }

+  RW_IRAM1 0x20000000 0x00020000  {  ; RW data

+   .ANY (+RW +ZI)

+  }

+}

+

diff --git a/bsp/stm32/stm32f407-robomaster-c/figures/board.png b/bsp/stm32/stm32f407-robomaster-c/figures/board.png
new file mode 100644
index 0000000000..39d13173ed
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/figures/board.png
diff --git a/bsp/stm32/stm32f407-robomaster-c/project.ewd b/bsp/stm32/stm32f407-robomaster-c/project.ewd
new file mode 100644
index 0000000000..102e51f67a
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.ewd
@@ -0,0 +1,2966 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>rt-thread</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\STM32F407IG.ddf</state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.11.3.13977</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>STLINK_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state>8.32.1.18618</state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state>$TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F4xxx.board</state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>7</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state>168.0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state>168.0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>2</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkProbeList</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\HWRTOSplugin\HWRTOSplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.11.3.13977</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>ARMSIM_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>2</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkProbeList</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\HWRTOSplugin\HWRTOSplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+</project>
diff --git a/bsp/stm32/stm32f407-robomaster-c/project.ewp b/bsp/stm32/stm32f407-robomaster-c/project.ewp
new file mode 100644
index 0000000000..ca8aeb43b8
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.ewp
@@ -0,0 +1,2305 @@
+<project>

+  <fileVersion>3</fileVersion>

+  <configuration>

+    <name>rt-thread</name>

+    <toolchain>

+      <name>ARM</name>

+    </toolchain>

+    <debug>1</debug>

+    <settings>

+      <name>General</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <version>31</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>ExePath</name>

+          <state>build\iar\Exe</state>

+        </option>

+        <option>

+          <name>ObjPath</name>

+          <state>build\iar\Obj</state>

+        </option>

+        <option>

+          <name>ListPath</name>

+          <state>build\iar\List</state>

+        </option>

+        <option>

+          <name>GEndianMode</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>Input description</name>

+          <state>Automatic choice of formatter, without multibyte support.</state>

+        </option>

+        <option>

+          <name>Output description</name>

+          <state>Automatic choice of formatter, without multibyte support.</state>

+        </option>

+        <option>

+          <name>GOutputBinary</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCoreOrChip</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelect</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelectSlave</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>RTDescription</name>

+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>

+        </option>

+        <option>

+          <name>OGProductVersion</name>

+          <state>6.30.6.53380</state>

+        </option>

+        <option>

+          <name>OGLastSavedByProductVersion</name>

+          <state>8.32.1.18618</state>

+        </option>

+        <option>

+          <name>GeneralEnableMisra</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraVerbose</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGChipSelectEditMenu</name>

+          <state>STM32F407IG	ST STM32F407IG</state>

+        </option>

+        <option>

+          <name>GenLowLevelInterface</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GEndianModeBE</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OGBufferedTerminalOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenStdoutInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>GeneralMisraVer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>RTConfigPath2</name>

+          <state>$TOOLKIT_DIR$\inc\c\DLib_Config_Normal.h</state>

+        </option>

+        <option>

+          <name>GBECoreSlave</name>

+          <version>26</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>OGUseCmsis</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGUseCmsisDspLib</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibThreads</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CoreVariant</name>

+          <version>26</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>GFPUDeviceSlave</name>

+          <state>STM32F407IG	ST STM32F407IG</state>

+        </option>

+        <option>

+          <name>FPU2</name>

+          <version>0</version>

+          <state>4</state>

+        </option>

+        <option>

+          <name>NrRegs</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>NEON</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUCoreSlave2</name>

+          <version>26</version>

+          <state>39</state>

+        </option>

+        <option>

+          <name>OGCMSISPackSelectDevice</name>

+        </option>

+        <option>

+          <name>OgLibHeap</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGLibAdditionalLocale</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenLocaleTags</name>

+          <state />

+        </option>

+        <option>

+          <name>GenLocaleDisplayOnly</name>

+          <state />

+        </option>

+        <option>

+          <name>DSPExtension</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>TrustZone</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>TrustZoneModes</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>ICCARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>35</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>CCOptimizationNoSizeConstraints</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDefines</name>

+          <state />

+          <state>STM32F407xx</state>

+          <state>__RTTHREAD__</state>

+          <state>USE_HAL_DRIVER</state>

+        </option>

+        <option>

+          <name>CCPreprocFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocComments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMnemonics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMessages</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagSuppress</name>

+          <state>Pa050</state>

+        </option>

+        <option>

+          <name>CCDiagRemark</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagWarning</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagError</name>

+          <state />

+        </option>

+        <option>

+          <name>CCObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCAllowList</name>

+          <version>1</version>

+          <state>00000000</state>

+        </option>

+        <option>

+          <name>CCDebugInfo</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IEndianMode</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IExtraOptionsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLangConformance</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCSignedPlainChar</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCRequirePrototypes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagWarnAreErr</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCompilerRuntimeInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OutputFile</name>

+          <state>$FILE_BNAME$.o</state>

+        </option>

+        <option>

+          <name>CCLibConfigHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>PreInclude</name>

+          <state />

+        </option>

+        <option>

+          <name>CompilerMisraOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCIncludePath2</name>

+          <state />

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>

+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>

+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>

+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common\none-gcc</state>

+          <state>$PROJ_DIR$\..\..\..\examples\utest\testcases\kernel</state>

+          <state>$PROJ_DIR$\.</state>

+          <state>$PROJ_DIR$\applications</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>

+          <state>$PROJ_DIR$\board</state>

+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>

+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>

+          <state>$PROJ_DIR$\..\..\..\include</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>

+        </option>

+        <option>

+          <name>CCStdIncCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCodeSection</name>

+          <state>.text</state>

+        </option>

+        <option>

+          <name>IProcessorMode2</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptLevel</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptStrategy</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptLevelSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>CCPosIndRopi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndRwpi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndNoDynInit</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccLang</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCDialect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccAllowVLA</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccStaticDestr</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccCppInlineSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccFloatSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCNoLiteralPool</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptStrategySlave</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCGuardCalls</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccExceptions2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccRTTI2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OICompilerExtraOption</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>AARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>10</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>AObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AEndian</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>ACaseSensitivity</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacroChars</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnWhat</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnOne</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange1</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange2</name>

+          <state />

+        </option>

+        <option>

+          <name>ADebug</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AltRegisterNames</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ADefines</name>

+          <state />

+        </option>

+        <option>

+          <name>AList</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AListHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AListing</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>Includes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacDefs</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacExps</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacExec</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OnlyAssed</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MultiLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLengthCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLength</name>

+          <state>80</state>

+        </option>

+        <option>

+          <name>TabSpacing</name>

+          <state>8</state>

+        </option>

+        <option>

+          <name>AXRef</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDefines</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefInternal</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDual</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AOutputFile</name>

+          <state>$FILE_BNAME$.o</state>

+        </option>

+        <option>

+          <name>ALimitErrorsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ALimitErrorsEdit</name>

+          <state>100</state>

+        </option>

+        <option>

+          <name>AIgnoreStdInclude</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AUserIncludes</name>

+          <state />

+        </option>

+        <option>

+          <name>AExtraOptionsCheckV2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AExtraOptionsV2</name>

+          <state />

+        </option>

+        <option>

+          <name>AsmNoLiteralPool</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>OBJCOPY</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>1</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>OOCOutputFormat</name>

+          <version>3</version>

+          <state>3</state>

+        </option>

+        <option>

+          <name>OCOutputOverride</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCOutputFile</name>

+          <state>../../../rtthread.bin</state>

+        </option>

+        <option>

+          <name>OOCCommandLineProducer</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCObjCopyEnable</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>CUSTOM</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <extensions />

+        <cmdline />

+        <hasPrio>0</hasPrio>

+      </data>

+    </settings>

+    <settings>

+      <name>BICOMP</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+    <settings>

+      <name>BUILDACTION</name>

+      <archiveVersion>1</archiveVersion>

+      <data>

+        <prebuild />

+        <postbuild />

+      </data>

+    </settings>

+    <settings>

+      <name>ILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>22</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>IlinkLibIOConfig</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>XLinkMisraHandler</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkInputFileSlave</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOutputFile</name>

+          <state>project.out</state>

+        </option>

+        <option>

+          <name>IlinkDebugInfoEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkKeepSymbols</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySymbol</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySegment</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryAlign</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkConfigDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkMapFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogInitialization</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogModule</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogSection</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogVeneer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfOverride</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile</name>

+          <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>

+        </option>

+        <option>

+          <name>IlinkIcfFileSlave</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkSuppressDiags</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsRem</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsWarn</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsErr</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkWarningsAreErrors</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkUseExtraOptions</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkLowLevelInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAutoLibEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAdditionalLibs</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkOverrideProgramEntryLabel</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabelSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabel</name>

+          <state>__iar_program_start</state>

+        </option>

+        <option>

+          <name>DoFill</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>FillerByte</name>

+          <state>0xFF</state>

+        </option>

+        <option>

+          <name>FillerStart</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>FillerEnd</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>CrcSize</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcAlign</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcPoly</name>

+          <state>0x11021</state>

+        </option>

+        <option>

+          <name>CrcCompl</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcBitOrder</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcInitialValue</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>DoCrc</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkBE8Slave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkBufferedTerminalOutput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkStdoutInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcFullSize</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIElfToolPostProcess</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogAutoLibSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogRedirSymbols</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogUnusedFragments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcReverseByteOrder</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcUseAsInput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptInline</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsAllow</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsForce</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptMergeDuplSections</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptUseVfe</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptForceVfe</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackAnalysisEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackControlFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkStackCallGraphFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CrcAlgorithm</name>

+          <version>1</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcUnitSize</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkThreadsSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLogCallGraph</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile_AltDefault</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkHeapSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLocaleSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkTrustzoneImportLibraryOut</name>

+          <state>###Unitialized###</state>

+        </option>

+        <option>

+          <name>OILinkExtraOption</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>IARCHIVE</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>0</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>1</debug>

+        <option>

+          <name>IarchiveInputs</name>

+          <state />

+        </option>

+        <option>

+          <name>IarchiveOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IarchiveOutput</name>

+          <state>###Unitialized###</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>BILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+  </configuration>

+  <configuration>

+    <name>Release</name>

+    <toolchain>

+      <name>ARM</name>

+    </toolchain>

+    <debug>0</debug>

+    <settings>

+      <name>General</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <version>31</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>ExePath</name>

+          <state>Release\Exe</state>

+        </option>

+        <option>

+          <name>ObjPath</name>

+          <state>Release\Obj</state>

+        </option>

+        <option>

+          <name>ListPath</name>

+          <state>Release\List</state>

+        </option>

+        <option>

+          <name>GEndianMode</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>Input description</name>

+          <state />

+        </option>

+        <option>

+          <name>Output description</name>

+          <state />

+        </option>

+        <option>

+          <name>GOutputBinary</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCoreOrChip</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelect</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>GRuntimeLibSelectSlave</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>RTDescription</name>

+          <state />

+        </option>

+        <option>

+          <name>OGProductVersion</name>

+          <state>6.30.6.53380</state>

+        </option>

+        <option>

+          <name>OGLastSavedByProductVersion</name>

+          <state>8.11.3.13977</state>

+        </option>

+        <option>

+          <name>GeneralEnableMisra</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraVerbose</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGChipSelectEditMenu</name>

+          <state>Default	None</state>

+        </option>

+        <option>

+          <name>GenLowLevelInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GEndianModeBE</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGBufferedTerminalOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenStdoutInterface</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>GeneralMisraVer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GeneralMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>RTConfigPath2</name>

+          <state />

+        </option>

+        <option>

+          <name>GBECoreSlave</name>

+          <version>26</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OGUseCmsis</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGUseCmsisDspLib</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GRuntimeLibThreads</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CoreVariant</name>

+          <version>26</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUDeviceSlave</name>

+          <state>Default	None</state>

+        </option>

+        <option>

+          <name>FPU2</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>NrRegs</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>NEON</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GFPUCoreSlave2</name>

+          <version>26</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGCMSISPackSelectDevice</name>

+        </option>

+        <option>

+          <name>OgLibHeap</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGLibAdditionalLocale</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGPrintfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfVariant</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OGScanfMultibyteSupport</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>GenLocaleTags</name>

+          <state />

+        </option>

+        <option>

+          <name>GenLocaleDisplayOnly</name>

+          <state />

+        </option>

+        <option>

+          <name>DSPExtension</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>TrustZone</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>TrustZoneModes</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>ICCARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>35</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>CCOptimizationNoSizeConstraints</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDefines</name>

+          <state />

+          <state>STM32F407xx</state>

+          <state>__RTTHREAD__</state>

+          <state>USE_HAL_DRIVER</state>

+        </option>

+        <option>

+          <name>CCPreprocFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocComments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPreprocLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMnemonics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListCMessages</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCListAssSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagSuppress</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagRemark</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagWarning</name>

+          <state />

+        </option>

+        <option>

+          <name>CCDiagError</name>

+          <state />

+        </option>

+        <option>

+          <name>CCObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCAllowList</name>

+          <version>1</version>

+          <state>11111110</state>

+        </option>

+        <option>

+          <name>CCDebugInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IEndianMode</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IExtraOptionsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLangConformance</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCSignedPlainChar</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCRequirePrototypes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCDiagWarnAreErr</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCompilerRuntimeInfo</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CCLibConfigHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>PreInclude</name>

+          <state />

+        </option>

+        <option>

+          <name>CompilerMisraOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCIncludePath2</name>

+          <state />

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Include</state>

+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>

+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>

+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>

+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common\none-gcc</state>

+          <state>$PROJ_DIR$\..\..\..\examples\utest\testcases\kernel</state>

+          <state>$PROJ_DIR$\.</state>

+          <state>$PROJ_DIR$\applications</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>

+          <state>$PROJ_DIR$\board</state>

+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>

+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include</state>

+          <state>$PROJ_DIR$\..\..\..\include</state>

+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>

+          <state>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc</state>

+        </option>

+        <option>

+          <name>CCStdIncCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCCodeSection</name>

+          <state>.text</state>

+        </option>

+        <option>

+          <name>IProcessorMode2</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCOptLevel</name>

+          <state>3</state>

+        </option>

+        <option>

+          <name>CCOptStrategy</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptLevelSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules98</name>

+          <version>0</version>

+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+        </option>

+        <option>

+          <name>CompilerMisraRules04</name>

+          <version>0</version>

+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+        </option>

+        <option>

+          <name>CCPosIndRopi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndRwpi</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCPosIndNoDynInit</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccLang</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCDialect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccAllowVLA</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccStaticDestr</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccCppInlineSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IccFloatSemantics</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCNoLiteralPool</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCOptStrategySlave</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCGuardCalls</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncSource</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CCEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CCEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccExceptions2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IccRTTI2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OICompilerExtraOption</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>AARM</name>

+      <archiveVersion>2</archiveVersion>

+      <data>

+        <version>10</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>AObjPrefix</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AEndian</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>ACaseSensitivity</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacroChars</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnWhat</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AWarnOne</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange1</name>

+          <state />

+        </option>

+        <option>

+          <name>AWarnRange2</name>

+          <state />

+        </option>

+        <option>

+          <name>ADebug</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AltRegisterNames</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ADefines</name>

+          <state />

+        </option>

+        <option>

+          <name>AList</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AListHeader</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AListing</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>Includes</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacDefs</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MacExps</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>MacExec</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OnlyAssed</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>MultiLine</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLengthCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>PageLength</name>

+          <state>80</state>

+        </option>

+        <option>

+          <name>TabSpacing</name>

+          <state>8</state>

+        </option>

+        <option>

+          <name>AXRef</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDefines</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefInternal</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AXRefDual</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AFpuProcessor</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>AOutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>ALimitErrorsCheck</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>ALimitErrorsEdit</name>

+          <state>100</state>

+        </option>

+        <option>

+          <name>AIgnoreStdInclude</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AUserIncludes</name>

+          <state />

+        </option>

+        <option>

+          <name>AExtraOptionsCheckV2</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>AExtraOptionsV2</name>

+          <state />

+        </option>

+        <option>

+          <name>AsmNoLiteralPool</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>OBJCOPY</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>1</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>OOCOutputFormat</name>

+          <version>3</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OCOutputOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>OOCOutputFile</name>

+          <state />

+        </option>

+        <option>

+          <name>OOCCommandLineProducer</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>OOCObjCopyEnable</name>

+          <state>0</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>CUSTOM</name>

+      <archiveVersion>3</archiveVersion>

+      <data>

+        <extensions />

+        <cmdline />

+        <hasPrio>0</hasPrio>

+      </data>

+    </settings>

+    <settings>

+      <name>BICOMP</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+    <settings>

+      <name>BUILDACTION</name>

+      <archiveVersion>1</archiveVersion>

+      <data>

+        <prebuild />

+        <postbuild />

+      </data>

+    </settings>

+    <settings>

+      <name>ILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>22</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>IlinkLibIOConfig</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>XLinkMisraHandler</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkInputFileSlave</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOutputFile</name>

+          <state>###Unitialized###</state>

+        </option>

+        <option>

+          <name>IlinkDebugInfoEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkKeepSymbols</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySymbol</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinarySegment</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkRawBinaryAlign</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkConfigDefines</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkMapFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogFile</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogInitialization</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogModule</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogSection</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogVeneer</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile</name>

+          <state>lnk0t.icf</state>

+        </option>

+        <option>

+          <name>IlinkIcfFileSlave</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEnableRemarks</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkSuppressDiags</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsRem</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsWarn</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkTreatAsErr</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkWarningsAreErrors</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkUseExtraOptions</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkExtraOptions</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkLowLevelInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAutoLibEnable</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkAdditionalLibs</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkOverrideProgramEntryLabel</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabelSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkProgramEntryLabel</name>

+          <state />

+        </option>

+        <option>

+          <name>DoFill</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>FillerByte</name>

+          <state>0xFF</state>

+        </option>

+        <option>

+          <name>FillerStart</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>FillerEnd</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>CrcSize</name>

+          <version>0</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcAlign</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcPoly</name>

+          <state>0x11021</state>

+        </option>

+        <option>

+          <name>CrcCompl</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcBitOrder</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>CrcInitialValue</name>

+          <state>0x0</state>

+        </option>

+        <option>

+          <name>DoCrc</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkBE8Slave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkBufferedTerminalOutput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkStdoutInterfaceSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcFullSize</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIElfToolPostProcess</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogAutoLibSelect</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogRedirSymbols</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkLogUnusedFragments</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcReverseByteOrder</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCrcUseAsInput</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptInline</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsAllow</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptExceptionsForce</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkCmsis</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptMergeDuplSections</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkOptUseVfe</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkOptForceVfe</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackAnalysisEnable</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkStackControlFile</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkStackCallGraphFile</name>

+          <state />

+        </option>

+        <option>

+          <name>CrcAlgorithm</name>

+          <version>1</version>

+          <state>1</state>

+        </option>

+        <option>

+          <name>CrcUnitSize</name>

+          <version>0</version>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkThreadsSlave</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLogCallGraph</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkIcfFile_AltDefault</name>

+          <state />

+        </option>

+        <option>

+          <name>IlinkEncInput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutput</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IlinkEncOutputBom</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkHeapSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkLocaleSelect</name>

+          <state>1</state>

+        </option>

+        <option>

+          <name>IlinkTrustzoneImportLibraryOut</name>

+          <state>###Unitialized###</state>

+        </option>

+        <option>

+          <name>OILinkExtraOption</name>

+          <state>1</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>IARCHIVE</name>

+      <archiveVersion>0</archiveVersion>

+      <data>

+        <version>0</version>

+        <wantNonLocal>1</wantNonLocal>

+        <debug>0</debug>

+        <option>

+          <name>IarchiveInputs</name>

+          <state />

+        </option>

+        <option>

+          <name>IarchiveOverride</name>

+          <state>0</state>

+        </option>

+        <option>

+          <name>IarchiveOutput</name>

+          <state>###Unitialized###</state>

+        </option>

+      </data>

+    </settings>

+    <settings>

+      <name>BILINK</name>

+      <archiveVersion>0</archiveVersion>

+      <data />

+    </settings>

+  </configuration>

+  <group>

+    <name>Applications</name>

+    <file>

+      <name>$PROJ_DIR$\applications\main.c</name>

+    </file>

+  </group>

+  <group>

+    <name>CPU</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>

+    </file>

+  </group>

+  <group>

+    <name>DeviceDrivers</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>

+    </file>

+  </group>

+  <group>

+    <name>Drivers</name>

+    <file>

+      <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\iar\startup_stm32f407xx.s</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\board\board.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>

+    </file>

+  </group>

+  <group>

+    <name>finsh</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>

+    </file>

+  </group>

+  <group>

+    <name>Kernel</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\device.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\idle.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\clock.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\mem.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\object.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\irq.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\timer.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\thread.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\src\components.c</name>

+    </file>

+  </group>

+  <group>

+    <name>libc</name>

+    <file>

+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\time.c</name>

+    </file>

+  </group>

+  <group>

+    <name>Libraries</name>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</name>

+    </file>

+    <file>

+      <name>$PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</name>

+    </file>

+  </group>

+  <group>

+    <name>utestcases</name>

+  </group>

+</project>

diff --git a/bsp/stm32/stm32f407-robomaster-c/project.eww b/bsp/stm32/stm32f407-robomaster-c/project.eww
new file mode 100644
index 0000000000..c2cb02eb1e
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.eww
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>

+

+<workspace>

+  <project>

+    <path>$WS_DIR$\project.ewp</path>

+  </project>

+  <batchBuild/>

+</workspace>

+

+

diff --git a/bsp/stm32/stm32f407-robomaster-c/project.uvopt b/bsp/stm32/stm32f407-robomaster-c/project.uvopt
new file mode 100644
index 0000000000..b53d69d5df
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.uvopt
@@ -0,0 +1,162 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-robomaster-c/project.uvoptx b/bsp/stm32/stm32f407-robomaster-c/project.uvoptx
new file mode 100644
index 0000000000..01c3739c9d
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.uvoptx
@@ -0,0 +1,913 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U0674FF504955857567053730 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Applications</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>applications\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>CPU</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
+      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
+      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
+      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName>
+      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName>
+      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>DeviceDrivers</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>7</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
+      <FilenameWithoutPath>pin.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>8</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
+      <FilenameWithoutPath>serial.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>9</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\dataqueue.c</PathWithFileName>
+      <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>10</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\pipe.c</PathWithFileName>
+      <FilenameWithoutPath>pipe.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>11</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\workqueue.c</PathWithFileName>
+      <FilenameWithoutPath>workqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>12</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\waitqueue.c</PathWithFileName>
+      <FilenameWithoutPath>waitqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>13</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\ringbuffer.c</PathWithFileName>
+      <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>14</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\completion.c</PathWithFileName>
+      <FilenameWithoutPath>completion.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>15</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\src\ringblk_buf.c</PathWithFileName>
+      <FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Drivers</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>16</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_msp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>17</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f407xx.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>18</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>board\board.c</PathWithFileName>
+      <FilenameWithoutPath>board.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>19</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>20</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
+      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>21</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
+      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>finsh</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>22</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName>
+      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>23</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName>
+      <FilenameWithoutPath>msh.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>24</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName>
+      <FilenameWithoutPath>cmd.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Kernel</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>25</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
+      <FilenameWithoutPath>object.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>26</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
+      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>27</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
+      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>28</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
+      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>29</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
+      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>30</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
+      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>31</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
+      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>32</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
+      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>33</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
+      <FilenameWithoutPath>device.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>34</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
+      <FilenameWithoutPath>mem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>35</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
+      <FilenameWithoutPath>components.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>36</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
+      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>37</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
+      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>libc</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>38</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\time.c</PathWithFileName>
+      <FilenameWithoutPath>time.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Libraries</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>39</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_uart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>40</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cryp_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>41</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>42</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rng.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>43</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>44</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>45</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>46</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>47</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cec.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>48</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>49</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>50</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>51</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</PathWithFileName>
+      <FilenameWithoutPath>system_stm32f4xx.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>52</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_crc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>53</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cortex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>54</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cryp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>55</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-robomaster-c/project.uvproj b/bsp/stm32/stm32f407-robomaster-c/project.uvproj
new file mode 100644
index 0000000000..a2c80e0594
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.uvproj
@@ -0,0 +1,1189 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+  <SchemaVersion>1.1</SchemaVersion>
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407ZG</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec />
+          <StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
+          <DeviceId>6105</DeviceId>
+          <RegisterFile>stm32f4xx.h</RegisterFile>
+          <MemoryEnv />
+          <Cmp />
+          <Asm />
+          <Linker />
+          <OHString />
+          <InfinionOptionDll />
+          <SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
+          <SLE66AMisc />
+          <SLE66LinkerMisc />
+          <SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath />
+          <IncludePath />
+          <LibPath />
+          <RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString />
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument />
+          <IncludeLibraryModules />
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU -REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>0</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4 />
+          <pFcarmOut />
+          <pFcarmGrp />
+          <pFcArmRoot />
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName />
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>0</Im1Chk>
+            <Im2Chk>1</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector />
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define>USE_HAL_DRIVER, STM32F407xx</Define>
+              <Undefine />
+              <IncludePath>applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m4;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath />
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase />
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs />
+            <IncludeLibsPath />
+            <Misc> --keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
+            <LinkerInputFile />
+            <DisabledWarnings />
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>startup_stm32f407xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\clock.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\components.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\device.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\idle.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\irq.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mem.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\object.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>signal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\signal.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\thread.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CORTEX-M4</GroupName>
+          <Files>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>pin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ringblk_buf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\shell.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>symbol.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\symbol.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_file.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_file.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>STM32_HAL</GroupName>
+          <Files>
+            <File>
+              <FileName>system_stm32f4xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_adc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cryp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dac_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dac_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dcmi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dcmi_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dfsdm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dfsdm.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma2d.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_dsi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dsi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_eth.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_eth.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_flash_ramfunc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_fmpi2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_fmpi2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_fmpi2c_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hash.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hash_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hash_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_hcd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_hcd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2s.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_i2s_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2s_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_irda.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_irda.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_iwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_lptim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_lptim.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_ltdc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_ltdc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_ltdc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_nand.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nand.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_nor.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_nor.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pccard.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pccard.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pcd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pcd_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_qspi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_qspi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rng.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_rtc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sai.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sai_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sdram.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sdram.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_smartcard.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_smartcard.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_spdifrx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spdifrx.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_sram.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sram.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_tim.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_tim_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_wwdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_wwdg.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_fmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_fsmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_fsmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_sdmmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_sdmmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_ll_usb.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+</Project>
diff --git a/bsp/stm32/stm32f407-robomaster-c/project.uvprojx b/bsp/stm32/stm32f407-robomaster-c/project.uvprojx
new file mode 100644
index 0000000000..0fd6eafce1
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/project.uvprojx
@@ -0,0 +1,707 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407IGHx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.2.15.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32F407IGHx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F407IGHx$CMSIS\SVD\STM32F40x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define>USE_HAL_DRIVER, STM32F407xx, __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND</Define>
+              <Undefine></Undefine>
+              <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\none-gcc;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include;..\..\..\examples\utest\testcases\kernel</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\main.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CPU</GroupName>
+          <Files>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>pin.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+            <File>
+              <FileName>ringblk_buf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f407xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+            </File>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\shell.c</FilePath>
+            </File>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh.c</FilePath>
+            </File>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\object.c</FilePath>
+            </File>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
+            </File>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
+            </File>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\clock.c</FilePath>
+            </File>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\irq.c</FilePath>
+            </File>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\timer.c</FilePath>
+            </File>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\idle.c</FilePath>
+            </File>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\thread.c</FilePath>
+            </File>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\device.c</FilePath>
+            </File>
+            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mem.c</FilePath>
+            </File>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\components.c</FilePath>
+            </File>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
+            </File>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>libc</GroupName>
+          <Files>
+            <File>
+              <FileName>time.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Libraries</GroupName>
+          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rng.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cec.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_rcc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_dma_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_pwr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
+            </File>
+            <File>
+              <FileName>system_stm32f4xx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cortex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_cryp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f4xx_hal_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-robomaster-c/rtconfig.h b/bsp/stm32/stm32f407-robomaster-c/rtconfig.h
new file mode 100644
index 0000000000..78104e6805
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/rtconfig.h
@@ -0,0 +1,187 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice optimization */
+
+#define RT_DEBUG
+#define RT_DEBUG_COLOR
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_VER_NUM 0x40004
+#define ARCH_ARM
+#define RT_USING_CPU_FFS
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_USING_MSH_ONLY
+#define FINSH_ARG_MAX 10
+
+/* Device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
+#define RT_USING_SERIAL
+#define RT_USING_SERIAL_V1
+#define RT_SERIAL_USING_DMA
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_PIN
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_LIBC_USING_TIME
+#define RT_LIBC_FIXED_TIMEZONE 8
+
+/* Network */
+
+/* Socket abstraction layer */
+
+
+/* Network interface device */
+
+
+/* light weight TCP/IP stack */
+
+
+/* AT commands */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread Utestcases */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
+/* peripheral libraries and drivers */
+
+
+/* AI packages */
+
+
+/* miscellaneous packages */
+
+
+/* samples: kernel and components samples */
+
+
+/* entertainment: terminal games and other interesting software packages */
+
+#define SOC_FAMILY_STM32
+#define SOC_SERIES_STM32F4
+
+/* Hardware Drivers Config */
+
+#define SOC_STM32F407IG
+
+/* Onboard Peripheral Drivers */
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART1
+
+/* Board extended module Drivers */
+
+
+#endif
diff --git a/bsp/stm32/stm32f407-robomaster-c/rtconfig.py b/bsp/stm32/stm32f407-robomaster-c/rtconfig.py
new file mode 100644
index 0000000000..b0cd716905
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/rtconfig.py
@@ -0,0 +1,149 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'C:\Users\XXYYZZ'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iar'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+
+    CXXFLAGS = CFLAGS
+    
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)
diff --git a/bsp/stm32/stm32f407-robomaster-c/template.ewd b/bsp/stm32/stm32f407-robomaster-c/template.ewd
new file mode 100644
index 0000000000..0328777969
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.ewd
@@ -0,0 +1,2966 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>rt-thread</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\STM32F407IG.ddf</state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.32.1.18618</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>STLINK_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state>8.32.1.18618</state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state>$TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F4xxx.board</state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state>168.0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>2</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkProbeList</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>3</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\HWRTOSplugin\HWRTOSplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.32.1.18618</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>ARMSIM_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>6</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>2</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkProbeList</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>3</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\HWRTOSplugin\HWRTOSplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+</project>
diff --git a/bsp/stm32/stm32f407-robomaster-c/template.ewp b/bsp/stm32/stm32f407-robomaster-c/template.ewp
new file mode 100644
index 0000000000..c3ce258e5c
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.ewp
@@ -0,0 +1,2074 @@
+<?xml version="1.0" encoding="UTF-8"?>

+<project>

+    <fileVersion>3</fileVersion>

+    <configuration>

+        <name>rt-thread</name>

+        <toolchain>

+            <name>ARM</name>

+        </toolchain>

+        <debug>1</debug>

+        <settings>

+            <name>General</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <version>31</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>ExePath</name>

+                    <state>build\iar\Exe</state>

+                </option>

+                <option>

+                    <name>ObjPath</name>

+                    <state>build\iar\Obj</state>

+                </option>

+                <option>

+                    <name>ListPath</name>

+                    <state>build\iar\List</state>

+                </option>

+                <option>

+                    <name>GEndianMode</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>Input description</name>

+                    <state>Automatic choice of formatter, without multibyte support.</state>

+                </option>

+                <option>

+                    <name>Output description</name>

+                    <state>Automatic choice of formatter, without multibyte support.</state>

+                </option>

+                <option>

+                    <name>GOutputBinary</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCoreOrChip</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelect</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelectSlave</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>RTDescription</name>

+                    <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>

+                </option>

+                <option>

+                    <name>OGProductVersion</name>

+                    <state>6.30.6.53380</state>

+                </option>

+                <option>

+                    <name>OGLastSavedByProductVersion</name>

+                    <state>8.32.1.18618</state>

+                </option>

+                <option>

+                    <name>GeneralEnableMisra</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVerbose</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGChipSelectEditMenu</name>

+                    <state>STM32F407IG	ST STM32F407IG</state>

+                </option>

+                <option>

+                    <name>GenLowLevelInterface</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GEndianModeBE</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OGBufferedTerminalOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenStdoutInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>RTConfigPath2</name>

+                    <state>$TOOLKIT_DIR$\inc\c\DLib_Config_Normal.h</state>

+                </option>

+                <option>

+                    <name>GBECoreSlave</name>

+                    <version>26</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>OGUseCmsis</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGUseCmsisDspLib</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibThreads</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CoreVariant</name>

+                    <version>26</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>GFPUDeviceSlave</name>

+                    <state>STM32F407IG	ST STM32F407IG</state>

+                </option>

+                <option>

+                    <name>FPU2</name>

+                    <version>0</version>

+                    <state>4</state>

+                </option>

+                <option>

+                    <name>NrRegs</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>NEON</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUCoreSlave2</name>

+                    <version>26</version>

+                    <state>39</state>

+                </option>

+                <option>

+                    <name>OGCMSISPackSelectDevice</name>

+                </option>

+                <option>

+                    <name>OgLibHeap</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGLibAdditionalLocale</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenLocaleTags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GenLocaleDisplayOnly</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DSPExtension</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>TrustZone</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>TrustZoneModes</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>ICCARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>35</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>CCOptimizationNoSizeConstraints</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCPreprocFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocComments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMnemonics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMessages</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagSuppress</name>

+                    <state>Pa050</state>

+                </option>

+                <option>

+                    <name>CCDiagRemark</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagWarning</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagError</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCAllowList</name>

+                    <version>1</version>

+                    <state>00000000</state>

+                </option>

+                <option>

+                    <name>CCDebugInfo</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IEndianMode</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IExtraOptionsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLangConformance</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCSignedPlainChar</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCRequirePrototypes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagWarnAreErr</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCompilerRuntimeInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OutputFile</name>

+                    <state>$FILE_BNAME$.o</state>

+                </option>

+                <option>

+                    <name>CCLibConfigHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>PreInclude</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CompilerMisraOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCIncludePath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCStdIncCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCodeSection</name>

+                    <state>.text</state>

+                </option>

+                <option>

+                    <name>IProcessorMode2</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptLevel</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptStrategy</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptLevelSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>CCPosIndRopi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndRwpi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndNoDynInit</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccLang</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCDialect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccAllowVLA</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccStaticDestr</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccCppInlineSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccFloatSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptStrategySlave</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCGuardCalls</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccExceptions2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccRTTI2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OICompilerExtraOption</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>AARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>10</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>AObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AEndian</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>ACaseSensitivity</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacroChars</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnWhat</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnOne</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange1</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ADebug</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AltRegisterNames</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ADefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AList</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AListHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AListing</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>Includes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacDefs</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacExps</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacExec</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OnlyAssed</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MultiLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLengthCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLength</name>

+                    <state>80</state>

+                </option>

+                <option>

+                    <name>TabSpacing</name>

+                    <state>8</state>

+                </option>

+                <option>

+                    <name>AXRef</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDefines</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefInternal</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDual</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AOutputFile</name>

+                    <state>$FILE_BNAME$.o</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsEdit</name>

+                    <state>100</state>

+                </option>

+                <option>

+                    <name>AIgnoreStdInclude</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AUserIncludes</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AExtraOptionsCheckV2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AExtraOptionsV2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AsmNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>OBJCOPY</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>1</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>OOCOutputFormat</name>

+                    <version>3</version>

+                    <state>3</state>

+                </option>

+                <option>

+                    <name>OCOutputOverride</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCOutputFile</name>

+                    <state>../../../rtthread.bin</state>

+                </option>

+                <option>

+                    <name>OOCCommandLineProducer</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCObjCopyEnable</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>CUSTOM</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <extensions></extensions>

+                <cmdline></cmdline>

+                <hasPrio>0</hasPrio>

+            </data>

+        </settings>

+        <settings>

+            <name>BICOMP</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+        <settings>

+            <name>BUILDACTION</name>

+            <archiveVersion>1</archiveVersion>

+            <data>

+                <prebuild></prebuild>

+                <postbuild></postbuild>

+            </data>

+        </settings>

+        <settings>

+            <name>ILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>22</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>IlinkLibIOConfig</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>XLinkMisraHandler</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkInputFileSlave</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOutputFile</name>

+                    <state>project.out</state>

+                </option>

+                <option>

+                    <name>IlinkDebugInfoEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkKeepSymbols</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySymbol</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySegment</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryAlign</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkConfigDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkMapFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogInitialization</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogModule</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogSection</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogVeneer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfOverride</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile</name>

+                    <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFileSlave</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkSuppressDiags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsRem</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsWarn</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsErr</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkWarningsAreErrors</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkUseExtraOptions</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkLowLevelInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAutoLibEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAdditionalLibs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkOverrideProgramEntryLabel</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabelSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabel</name>

+                    <state>__iar_program_start</state>

+                </option>

+                <option>

+                    <name>DoFill</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>FillerByte</name>

+                    <state>0xFF</state>

+                </option>

+                <option>

+                    <name>FillerStart</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>FillerEnd</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>CrcSize</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcAlign</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcPoly</name>

+                    <state>0x11021</state>

+                </option>

+                <option>

+                    <name>CrcCompl</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcBitOrder</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcInitialValue</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>DoCrc</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkBE8Slave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkBufferedTerminalOutput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkStdoutInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcFullSize</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIElfToolPostProcess</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogAutoLibSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogRedirSymbols</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogUnusedFragments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcReverseByteOrder</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcUseAsInput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptInline</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsAllow</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsForce</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptMergeDuplSections</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptUseVfe</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptForceVfe</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackAnalysisEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackControlFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkStackCallGraphFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CrcAlgorithm</name>

+                    <version>1</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcUnitSize</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkThreadsSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLogCallGraph</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile_AltDefault</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkHeapSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLocaleSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkTrustzoneImportLibraryOut</name>

+                    <state>###Unitialized###</state>

+                </option>

+                <option>

+                    <name>OILinkExtraOption</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>IARCHIVE</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>0</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>1</debug>

+                <option>

+                    <name>IarchiveInputs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IarchiveOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IarchiveOutput</name>

+                    <state>###Unitialized###</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>BILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+    </configuration>

+    <configuration>

+        <name>Release</name>

+        <toolchain>

+            <name>ARM</name>

+        </toolchain>

+        <debug>0</debug>

+        <settings>

+            <name>General</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <version>31</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>ExePath</name>

+                    <state>Release\Exe</state>

+                </option>

+                <option>

+                    <name>ObjPath</name>

+                    <state>Release\Obj</state>

+                </option>

+                <option>

+                    <name>ListPath</name>

+                    <state>Release\List</state>

+                </option>

+                <option>

+                    <name>GEndianMode</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>Input description</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>Output description</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GOutputBinary</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCoreOrChip</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelect</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibSelectSlave</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>RTDescription</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>OGProductVersion</name>

+                    <state>6.30.6.53380</state>

+                </option>

+                <option>

+                    <name>OGLastSavedByProductVersion</name>

+                    <state>8.11.3.13977</state>

+                </option>

+                <option>

+                    <name>GeneralEnableMisra</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVerbose</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGChipSelectEditMenu</name>

+                    <state>Default	None</state>

+                </option>

+                <option>

+                    <name>GenLowLevelInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GEndianModeBE</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGBufferedTerminalOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenStdoutInterface</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>GeneralMisraVer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GeneralMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>RTConfigPath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GBECoreSlave</name>

+                    <version>26</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OGUseCmsis</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGUseCmsisDspLib</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GRuntimeLibThreads</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CoreVariant</name>

+                    <version>26</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUDeviceSlave</name>

+                    <state>Default	None</state>

+                </option>

+                <option>

+                    <name>FPU2</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>NrRegs</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>NEON</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GFPUCoreSlave2</name>

+                    <version>26</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGCMSISPackSelectDevice</name>

+                </option>

+                <option>

+                    <name>OgLibHeap</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGLibAdditionalLocale</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGPrintfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfVariant</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OGScanfMultibyteSupport</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>GenLocaleTags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>GenLocaleDisplayOnly</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DSPExtension</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>TrustZone</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>TrustZoneModes</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>ICCARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>35</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>CCOptimizationNoSizeConstraints</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCPreprocFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocComments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPreprocLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMnemonics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListCMessages</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCListAssSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagSuppress</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagRemark</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagWarning</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCDiagError</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCAllowList</name>

+                    <version>1</version>

+                    <state>11111110</state>

+                </option>

+                <option>

+                    <name>CCDebugInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IEndianMode</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IExtraOptionsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLangConformance</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCSignedPlainChar</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCRequirePrototypes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCDiagWarnAreErr</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCompilerRuntimeInfo</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCLibConfigHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>PreInclude</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CompilerMisraOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCIncludePath2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CCStdIncCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCCodeSection</name>

+                    <state>.text</state>

+                </option>

+                <option>

+                    <name>IProcessorMode2</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCOptLevel</name>

+                    <state>3</state>

+                </option>

+                <option>

+                    <name>CCOptStrategy</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptLevelSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules98</name>

+                    <version>0</version>

+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>

+                </option>

+                <option>

+                    <name>CompilerMisraRules04</name>

+                    <version>0</version>

+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>

+                </option>

+                <option>

+                    <name>CCPosIndRopi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndRwpi</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCPosIndNoDynInit</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccLang</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCDialect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccAllowVLA</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccStaticDestr</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccCppInlineSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IccFloatSemantics</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCOptStrategySlave</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCGuardCalls</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncSource</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CCEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CCEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccExceptions2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IccRTTI2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OICompilerExtraOption</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>AARM</name>

+            <archiveVersion>2</archiveVersion>

+            <data>

+                <version>10</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>AObjPrefix</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AEndian</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>ACaseSensitivity</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacroChars</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnWhat</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AWarnOne</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange1</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AWarnRange2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ADebug</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AltRegisterNames</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ADefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AList</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AListHeader</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AListing</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>Includes</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacDefs</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MacExps</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>MacExec</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OnlyAssed</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>MultiLine</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLengthCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>PageLength</name>

+                    <state>80</state>

+                </option>

+                <option>

+                    <name>TabSpacing</name>

+                    <state>8</state>

+                </option>

+                <option>

+                    <name>AXRef</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDefines</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefInternal</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AXRefDual</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AFpuProcessor</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>AOutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>ALimitErrorsCheck</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>ALimitErrorsEdit</name>

+                    <state>100</state>

+                </option>

+                <option>

+                    <name>AIgnoreStdInclude</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AUserIncludes</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AExtraOptionsCheckV2</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>AExtraOptionsV2</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>AsmNoLiteralPool</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>OBJCOPY</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>1</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>OOCOutputFormat</name>

+                    <version>3</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OCOutputOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>OOCOutputFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>OOCCommandLineProducer</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>OOCObjCopyEnable</name>

+                    <state>0</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>CUSTOM</name>

+            <archiveVersion>3</archiveVersion>

+            <data>

+                <extensions></extensions>

+                <cmdline></cmdline>

+                <hasPrio>0</hasPrio>

+            </data>

+        </settings>

+        <settings>

+            <name>BICOMP</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+        <settings>

+            <name>BUILDACTION</name>

+            <archiveVersion>1</archiveVersion>

+            <data>

+                <prebuild></prebuild>

+                <postbuild></postbuild>

+            </data>

+        </settings>

+        <settings>

+            <name>ILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>22</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>IlinkLibIOConfig</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>XLinkMisraHandler</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkInputFileSlave</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOutputFile</name>

+                    <state>###Unitialized###</state>

+                </option>

+                <option>

+                    <name>IlinkDebugInfoEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkKeepSymbols</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySymbol</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinarySegment</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkRawBinaryAlign</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkConfigDefines</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkMapFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogFile</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogInitialization</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogModule</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogSection</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogVeneer</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile</name>

+                    <state>lnk0t.icf</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFileSlave</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEnableRemarks</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkSuppressDiags</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsRem</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsWarn</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkTreatAsErr</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkWarningsAreErrors</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkUseExtraOptions</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkExtraOptions</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkLowLevelInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAutoLibEnable</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkAdditionalLibs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkOverrideProgramEntryLabel</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabelSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkProgramEntryLabel</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>DoFill</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>FillerByte</name>

+                    <state>0xFF</state>

+                </option>

+                <option>

+                    <name>FillerStart</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>FillerEnd</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>CrcSize</name>

+                    <version>0</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcAlign</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcPoly</name>

+                    <state>0x11021</state>

+                </option>

+                <option>

+                    <name>CrcCompl</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcBitOrder</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>CrcInitialValue</name>

+                    <state>0x0</state>

+                </option>

+                <option>

+                    <name>DoCrc</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkBE8Slave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkBufferedTerminalOutput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkStdoutInterfaceSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcFullSize</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIElfToolPostProcess</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogAutoLibSelect</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogRedirSymbols</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkLogUnusedFragments</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcReverseByteOrder</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCrcUseAsInput</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptInline</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsAllow</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptExceptionsForce</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkCmsis</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptMergeDuplSections</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkOptUseVfe</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkOptForceVfe</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackAnalysisEnable</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkStackControlFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkStackCallGraphFile</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>CrcAlgorithm</name>

+                    <version>1</version>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>CrcUnitSize</name>

+                    <version>0</version>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkThreadsSlave</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLogCallGraph</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkIcfFile_AltDefault</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IlinkEncInput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutput</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IlinkEncOutputBom</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkHeapSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkLocaleSelect</name>

+                    <state>1</state>

+                </option>

+                <option>

+                    <name>IlinkTrustzoneImportLibraryOut</name>

+                    <state>###Unitialized###</state>

+                </option>

+                <option>

+                    <name>OILinkExtraOption</name>

+                    <state>1</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>IARCHIVE</name>

+            <archiveVersion>0</archiveVersion>

+            <data>

+                <version>0</version>

+                <wantNonLocal>1</wantNonLocal>

+                <debug>0</debug>

+                <option>

+                    <name>IarchiveInputs</name>

+                    <state></state>

+                </option>

+                <option>

+                    <name>IarchiveOverride</name>

+                    <state>0</state>

+                </option>

+                <option>

+                    <name>IarchiveOutput</name>

+                    <state>###Unitialized###</state>

+                </option>

+            </data>

+        </settings>

+        <settings>

+            <name>BILINK</name>

+            <archiveVersion>0</archiveVersion>

+            <data />

+        </settings>

+    </configuration>

+</project>

diff --git a/bsp/stm32/stm32f407-robomaster-c/template.eww b/bsp/stm32/stm32f407-robomaster-c/template.eww
new file mode 100644
index 0000000000..bd036bb4c9
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.eww
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>

+

+<workspace>

+  <project>

+    <path>$WS_DIR$\template.ewp</path>

+  </project>

+  <batchBuild/>

+</workspace>

+

+

diff --git a/bsp/stm32/stm32f407-robomaster-c/template.uvopt b/bsp/stm32/stm32f407-robomaster-c/template.uvopt
new file mode 100644
index 0000000000..b53d69d5df
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.uvopt
@@ -0,0 +1,162 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>25000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O207 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-robomaster-c/template.uvoptx b/bsp/stm32/stm32f407-robomaster-c/template.uvoptx
new file mode 100644
index 0000000000..ab07607d4a
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.uvoptx
@@ -0,0 +1,197 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>18</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U0674FF504955857567053730 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(2BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>0</EnableFlashSeq>
+        <EnableLog>0</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>10000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>
diff --git a/bsp/stm32/stm32f407-robomaster-c/template.uvproj b/bsp/stm32/stm32f407-robomaster-c/template.uvproj
new file mode 100644
index 0000000000..6ca2a92953
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.uvproj
@@ -0,0 +1,407 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407ZG</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
+          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
+          <DeviceId>6105</DeviceId>
+          <RegisterFile>stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
+          <DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments>-MPU -REMAP</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments>-MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>0</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>0</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>6</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>Segger\JL2CM3.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>0</Im1Chk>
+            <Im2Chk>1</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-robomaster-c/template.uvprojx b/bsp/stm32/stm32f407-robomaster-c/template.uvprojx
new file mode 100644
index 0000000000..90f76b3093
--- /dev/null
+++ b/bsp/stm32/stm32f407-robomaster-c/template.uvprojx
@@ -0,0 +1,395 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rt-thread</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F407IGHx</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F4xx_DFP.2.15.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:STM32F407IGHx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F407IGHx$CMSIS\SVD\STM32F40x.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\keil\Obj\</OutputDirectory>
+          <OutputName>rt-thread</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\build\keil\List\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>1</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>4</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source Group 1</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components/>
+    <files/>
+  </RTE>
+
+</Project>
diff --git a/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
index 195ad7beb1..c208e8f6bd 100644
--- a/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
@@ -25,18 +25,19 @@ Mcu.PinsNb=11
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F407VGTx
-MxCube.Version=5.0.0
-MxDb.Version=DB.5.0.0
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true
+MxCube.Version=6.2.1
+MxDb.Version=DB.6.0.21
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_0
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
 PA13.GPIOParameters=GPIO_Label
 PA13.GPIO_Label=SWDIO
 PA13.Locked=true
@@ -75,18 +76,14 @@ PB3.GPIOParameters=GPIO_Label
 PB3.GPIO_Label=SWO
 PB3.Locked=true
 PB3.Signal=SYS_JTDO-SWO
+PB6.GPIOParameters=GPIO_PuPd
+PB6.GPIO_PuPd=GPIO_PULLUP
 PB6.Mode=Asynchronous
 PB6.Signal=USART1_TX
+PB7.GPIOParameters=GPIO_PuPd
+PB7.GPIO_PuPd=GPIO_PULLUP
 PB7.Mode=Asynchronous
 PB7.Signal=USART1_RX
-PCC.Checker=false
-PCC.Line=STM32F407/417
-PCC.MCU=STM32F407V(E-G)Tx
-PCC.PartNumber=STM32F407VGTx
-PCC.Seq0=0
-PCC.Series=STM32F4
-PCC.Temperature=25
-PCC.Vdd=3.3
 PH0-OSC_IN.GPIOParameters=GPIO_Label
 PH0-OSC_IN.GPIO_Label=PH0-OSC_IN
 PH0-OSC_IN.Locked=true
diff --git a/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 2bac295eeb..e1da0e121a 100644
--- a/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f407-st-discovery/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,46 +2,46 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
-  * Copyright (c) 2018 STMicroelectronics International N.V. 
+  * Copyright (c) 2018 STMicroelectronics International N.V.
   * All rights reserved.
   *
-  * Redistribution and use in source and binary forms, with or without 
+  * Redistribution and use in source and binary forms, with or without
   * modification, are permitted, provided that the following conditions are met:
   *
-  * 1. Redistribution of source code must retain the above copyright notice, 
+  * 1. Redistribution of source code must retain the above copyright notice,
   *    this list of conditions and the following disclaimer.
   * 2. Redistributions in binary form must reproduce the above copyright notice,
   *    this list of conditions and the following disclaimer in the documentation
   *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other 
-  *    contributors to this software may be used to endorse or promote products 
+  * 3. Neither the name of STMicroelectronics nor the names of other
+  *    contributors to this software may be used to endorse or promote products
   *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this 
+  * 4. This software, including modifications and/or derivative works of this
   *    software, must execute solely and exclusively on microcontroller or
   *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under 
-  *    this license is void and will automatically terminate your rights under 
-  *    this license. 
+  * 5. Redistribution and use of this software other than as permitted under
+  *    this license is void and will automatically terminate your rights under
+  *    this license.
   *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
   * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
   * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
   * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
@@ -62,7 +62,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -117,7 +117,6 @@ void HAL_MspInit(void)
 */
 void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
 {
-
   GPIO_InitTypeDef GPIO_InitStruct = {0};
   if(hspi->Instance==SPI1)
   {
@@ -126,12 +125,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -153,10 +152,8 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
 * @param hspi: SPI handle pointer
 * @retval None
 */
-
 void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
 {
-
   if(hspi->Instance==SPI1)
   {
   /* USER CODE BEGIN SPI1_MspDeInit 0 */
@@ -164,11 +161,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin);
 
@@ -187,7 +184,6 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
 */
 void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 {
-
   GPIO_InitTypeDef GPIO_InitStruct = {0};
   if(huart->Instance==USART1)
   {
@@ -196,11 +192,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PB6     ------> USART1_TX
-    PB7     ------> USART1_RX 
+    PB7     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -222,10 +218,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 * @param huart: UART handle pointer
 * @retval None
 */
-
 void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
 {
-
   if(huart->Instance==USART1)
   {
   /* USER CODE BEGIN USART1_MspDeInit 0 */
@@ -233,10 +227,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PB6     ------> USART1_TX
-    PB7     ------> USART1_RX 
+    PB7     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
 
diff --git a/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 2ff19285ab..daf5f74fde 100644
--- a/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -48,14 +48,12 @@ PA14.GPIO_Label=TCK
 PA14.Locked=true
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA2.GPIOParameters=GPIO_Label
-PA2.GPIO_Label=USART_TX
-PA2.Locked=true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
-PA3.GPIOParameters=GPIO_Label
-PA3.GPIO_Label=USART_RX
-PA3.Locked=true
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA5.GPIOParameters=GPIO_Label
diff --git a/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 55374ff0d2..1246457260 100644
--- a/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f410-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -95,15 +95,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -130,10 +130,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
 
diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc
index 1791e31d5e..397b95b06c 100644
--- a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/CubeMX_Config.ioc
@@ -57,18 +57,26 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB1.Locked=true
 PB1.Signal=ADCx_IN9
 PB13.Locked=true
diff --git a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index ac3d0bf3f5..5598c57bce 100644
--- a/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f411-atk-nano/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,10 +114,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -148,9 +148,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PB1     ------> ADC1_IN9 
+
+    /**ADC1 GPIO Configuration
+    PB1     ------> ADC1_IN9
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);
 
@@ -176,11 +176,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE BEGIN I2C1_MspInit 0 */
 
   /* USER CODE END I2C1_MspInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**I2C1 GPIO Configuration    
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB7     ------> I2C1_SDA 
+    PB7     ------> I2C1_SDA
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
@@ -215,10 +215,10 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE END I2C1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_I2C1_CLK_DISABLE();
-  
-    /**I2C1 GPIO Configuration    
+
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB7     ------> I2C1_SDA 
+    PB7     ------> I2C1_SDA
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
 
@@ -293,12 +293,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -331,11 +331,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -363,11 +363,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -387,11 +387,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -424,10 +424,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -442,10 +442,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 68d45640ce..d770287e0b 100644
--- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -69,8 +69,12 @@ PA14.GPIO_Label=TCK
 PA14.Locked=true
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA5.Mode=Full_Duplex_Master
diff --git a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index b2c91f0c47..ff38319ce3 100644
--- a/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f411-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -165,13 +165,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PB4     ------> SPI1_MISO
-    PB5     ------> SPI1_MOSI 
+    PB5     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -211,11 +211,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PB4     ------> SPI1_MISO
-    PB5     ------> SPI1_MOSI 
+    PB5     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
 
@@ -260,14 +260,14 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PA6     ------> TIM3_CH1
     PA7     ------> TIM3_CH2
     PB0     ------> TIM3_CH3
-    PB1     ------> TIM3_CH4 
+    PB1     ------> TIM3_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -330,11 +330,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -354,11 +354,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART6_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART6 GPIO Configuration    
+    /**USART6 GPIO Configuration
     PA11     ------> USART6_TX
-    PA12     ------> USART6_RX 
+    PA12     ------> USART6_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -391,10 +391,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -409,10 +409,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART6_CLK_DISABLE();
-  
-    /**USART6 GPIO Configuration    
+
+    /**USART6 GPIO Configuration
     PA11     ------> USART6_TX
-    PA12     ------> USART6_RX 
+    PA12     ------> USART6_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
 
diff --git a/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/CubeMX_Config.ioc
index 1468ade621..4bf9eb69a8 100644
--- a/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/CubeMX_Config.ioc
@@ -49,6 +49,12 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Device_Only
@@ -65,8 +71,6 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PC13-ANTI_TAMP.Locked=true
 PC13-ANTI_TAMP.Signal=GPIO_Output
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 97a4cad91d..ff0ff3b0b6 100644
--- a/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f411-weact-MiniF4/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -137,12 +137,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -173,11 +173,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -270,15 +270,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -305,10 +305,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -333,11 +333,11 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -370,10 +370,10 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
 
diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 2ef6d3f970..1cb7cb865a 100644
--- a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,11 +114,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -151,10 +151,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, STLK_RX_Pin|STLK_TX_Pin);
 
@@ -180,13 +180,13 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -221,12 +221,12 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin);
 
diff --git a/bsp/stm32/stm32f412-st-nucleo/rtconfig.py b/bsp/stm32/stm32f412-st-nucleo/rtconfig.py
index 573c1f7492..9193d4a1d5 100644
--- a/bsp/stm32/stm32f412-st-nucleo/rtconfig.py
+++ b/bsp/stm32/stm32f412-st-nucleo/rtconfig.py
@@ -94,6 +94,40 @@ elif PLATFORM == 'armcc':
 
     POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
 
+elif PLATFORM == 'armclang':
+    # toolchains
+    CC = 'armclang'
+    CXX = 'armclang'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 '
+    CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 '
+    CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar '
+    CFLAGS += ' -gdwarf-3 -ffunction-sections '
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers '
+    LFLAGS += ' --list rt-thread.map '
+    LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" '
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib'
+
+    EXEC_PATH += '/ARM/ARMCLANG/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O1' # armclang recommend
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+        
+    CXXFLAGS = CFLAGS
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
 elif PLATFORM == 'iar':
     # toolchains
     CC = 'iccarm'
diff --git a/bsp/stm32/stm32f413-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f413-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index b70b0c1c20..fbc3920044 100644
--- a/bsp/stm32/stm32f413-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f413-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -115,10 +115,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -147,9 +147,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
 
@@ -174,11 +174,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE BEGIN I2C1_MspInit 0 */
 
   /* USER CODE END I2C1_MspInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**I2C1 GPIO Configuration    
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB9     ------> I2C1_SDA 
+    PB9     ------> I2C1_SDA
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
@@ -211,10 +211,10 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE END I2C1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_I2C1_CLK_DISABLE();
-  
-    /**I2C1 GPIO Configuration    
+
+    /**I2C1 GPIO Configuration
     PB6     ------> I2C1_SCL
-    PB9     ------> I2C1_SDA 
+    PB9     ------> I2C1_SDA
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_9);
 
@@ -285,13 +285,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB10     ------> SPI2_SCK 
+    PB10     ------> SPI2_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -329,11 +329,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB10     ------> SPI2_SCK 
+    PB10     ------> SPI2_SCK
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -409,10 +409,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM2_MspPostInit 0 */
 
   /* USER CODE END TIM2_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PA3     ------> TIM2_CH4 
+    /**TIM2 GPIO Configuration
+    PA3     ------> TIM2_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -498,12 +498,12 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -530,11 +530,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -565,10 +565,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2);
 
@@ -585,10 +585,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, STLK_RX_Pin|STLK_TX_Pin);
 
@@ -613,14 +613,14 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -658,15 +658,15 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
-    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin 
+    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin
                           |USB_DP_Pin);
 
   /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f427-robomaster-a/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f427-robomaster-a/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 19b391828c..efa99aed9a 100644
--- a/bsp/stm32/stm32f427-robomaster-a/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f427-robomaster-a/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                                                             /**
   * Initializes the Global MSP.
@@ -120,11 +120,11 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
     if(HAL_RCC_CAN1_CLK_ENABLED==1){
       __HAL_RCC_CAN1_CLK_ENABLE();
     }
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**CAN1 GPIO Configuration    
+    /**CAN1 GPIO Configuration
     PD0     ------> CAN1_RX
-    PD1     ------> CAN1_TX 
+    PD1     ------> CAN1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -148,11 +148,11 @@ void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
     if(HAL_RCC_CAN1_CLK_ENABLED==1){
       __HAL_RCC_CAN1_CLK_ENABLE();
     }
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**CAN2 GPIO Configuration    
+    /**CAN2 GPIO Configuration
     PB12     ------> CAN2_RX
-    PB13     ------> CAN2_TX 
+    PB13     ------> CAN2_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -186,10 +186,10 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
     if(HAL_RCC_CAN1_CLK_ENABLED==0){
       __HAL_RCC_CAN1_CLK_DISABLE();
     }
-  
-    /**CAN1 GPIO Configuration    
+
+    /**CAN1 GPIO Configuration
     PD0     ------> CAN1_RX
-    PD1     ------> CAN1_TX 
+    PD1     ------> CAN1_TX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1);
 
@@ -208,10 +208,10 @@ void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
     if(HAL_RCC_CAN1_CLK_ENABLED==0){
       __HAL_RCC_CAN1_CLK_DISABLE();
     }
-  
-    /**CAN2 GPIO Configuration    
+
+    /**CAN2 GPIO Configuration
     PB12     ------> CAN2_RX
-    PB13     ------> CAN2_TX 
+    PB13     ------> CAN2_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13);
 
@@ -238,18 +238,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC12     ------> SDIO_CK
     PC11     ------> SDIO_D3
     PC10     ------> SDIO_D2
     PD2     ------> SDIO_CMD
     PC9     ------> SDIO_D1
-    PC8     ------> SDIO_D0 
+    PC8     ------> SDIO_D0
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -286,16 +286,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC12     ------> SDIO_CK
     PC11     ------> SDIO_D3
     PC10     ------> SDIO_D2
     PD2     ------> SDIO_CMD
     PC9     ------> SDIO_D1
-    PC8     ------> SDIO_D0 
+    PC8     ------> SDIO_D0
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -323,12 +323,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF9     ------> SPI5_MOSI
-    PF8     ------> SPI5_MISO 
+    PF8     ------> SPI5_MISO
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_9|GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -359,11 +359,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF9     ------> SPI5_MOSI
-    PF8     ------> SPI5_MISO 
+    PF8     ------> SPI5_MISO
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_9|GPIO_PIN_8);
 
@@ -427,11 +427,11 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
 
   /* USER CODE END TIM4_MspPostInit 0 */
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
+    /**TIM4 GPIO Configuration
     PD15     ------> TIM4_CH4
     PD14     ------> TIM4_CH3
     PD13     ------> TIM4_CH2
-    PD12     ------> TIM4_CH1 
+    PD12     ------> TIM4_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -449,14 +449,14 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM5_MspPostInit 0 */
 
   /* USER CODE END TIM5_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOH_CLK_ENABLE();
-    /**TIM5 GPIO Configuration    
+    /**TIM5 GPIO Configuration
     PI0     ------> TIM5_CH4
     PH12     ------> TIM5_CH3
     PH11     ------> TIM5_CH2
-    PH10     ------> TIM5_CH1 
+    PH10     ------> TIM5_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -481,10 +481,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM12_MspPostInit 0 */
 
   /* USER CODE END TIM12_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
-    /**TIM12 GPIO Configuration    
-    PH6     ------> TIM12_CH1 
+    /**TIM12 GPIO Configuration
+    PH6     ------> TIM12_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -559,11 +559,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART7_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART7_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
-    /**UART7 GPIO Configuration    
+    /**UART7 GPIO Configuration
     PE8     ------> UART7_TX
-    PE7     ------> UART7_RX 
+    PE7     ------> UART7_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -583,11 +583,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART8_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART8_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
-    /**UART8 GPIO Configuration    
+    /**UART8 GPIO Configuration
     PE1     ------> UART8_TX
-    PE0     ------> UART8_RX 
+    PE0     ------> UART8_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -607,11 +607,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PB7     ------> USART1_RX
-    PB6     ------> USART1_TX 
+    PB6     ------> USART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -631,11 +631,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD9     ------> USART3_RX
-    PD8     ------> USART3_TX 
+    PD8     ------> USART3_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -655,11 +655,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART6_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**USART6 GPIO Configuration    
+    /**USART6 GPIO Configuration
     PG14     ------> USART6_TX
-    PG9     ------> USART6_RX 
+    PG9     ------> USART6_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -693,10 +693,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART7_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART7_CLK_DISABLE();
-  
-    /**UART7 GPIO Configuration    
+
+    /**UART7 GPIO Configuration
     PE8     ------> UART7_TX
-    PE7     ------> UART7_RX 
+    PE7     ------> UART7_RX
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_8|GPIO_PIN_7);
 
@@ -711,10 +711,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART8_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART8_CLK_DISABLE();
-  
-    /**UART8 GPIO Configuration    
+
+    /**UART8 GPIO Configuration
     PE1     ------> UART8_TX
-    PE0     ------> UART8_RX 
+    PE0     ------> UART8_RX
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1|GPIO_PIN_0);
 
@@ -729,10 +729,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PB7     ------> USART1_RX
-    PB6     ------> USART1_TX 
+    PB6     ------> USART1_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7|GPIO_PIN_6);
 
@@ -747,10 +747,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD9     ------> USART3_RX
-    PD8     ------> USART3_TX 
+    PD8     ------> USART3_TX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_9|GPIO_PIN_8);
 
@@ -765,10 +765,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART6_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART6_CLK_DISABLE();
-  
-    /**USART6 GPIO Configuration    
+
+    /**USART6 GPIO Configuration
     PG14     ------> USART6_TX
-    PG9     ------> USART6_RX 
+    PG9     ------> USART6_RX
     */
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_9);
 
diff --git a/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/CubeMX_Config.ioc
index 713e78f639..298807cd0b 100644
--- a/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/CubeMX_Config.ioc
@@ -175,6 +175,12 @@ NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
 PA0/WKUP.Signal=S_TIM2_CH1_ETR
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
@@ -185,8 +191,6 @@ PA2.Mode=RMII
 PA2.Signal=ETH_MDIO
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB13.Mode=RMII
 PB13.Signal=ETH_TXD1
 PB3.Locked=true
diff --git a/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 5e0a3aac30..5d46a084d8 100644
--- a/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f429-armfly-v6/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -116,11 +116,11 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
+    /**ADC1 GPIO Configuration
     PC0     ------> ADC1_IN10
-    PC3     ------> ADC1_IN13 
+    PC3     ------> ADC1_IN13
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -151,10 +151,10 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
+
+    /**ADC1 GPIO Configuration
     PC0     ------> ADC1_IN10
-    PC3     ------> ADC1_IN13 
+    PC3     ------> ADC1_IN13
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_3);
 
@@ -229,12 +229,12 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -243,7 +243,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -297,8 +297,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -307,7 +307,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -341,11 +341,11 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOJ_CLK_ENABLE();
     __HAL_RCC_GPIOK_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PI12     ------> LTDC_HSYNC
     PI13     ------> LTDC_VSYNC
     PI14     ------> LTDC_CLK
@@ -373,7 +373,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PK4     ------> LTDC_B5
     PK5     ------> LTDC_B6
     PK6     ------> LTDC_B7
-    PK7     ------> LTDC_DE 
+    PK7     ------> LTDC_DE
     */
     GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -382,9 +382,9 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7 
-                          |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7
+                          |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -392,7 +392,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOJ, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
+    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                           |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -424,8 +424,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PI12     ------> LTDC_HSYNC
     PI13     ------> LTDC_VSYNC
     PI14     ------> LTDC_CLK
@@ -453,16 +453,16 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PK4     ------> LTDC_B5
     PK5     ------> LTDC_B6
     PK6     ------> LTDC_B7
-    PK7     ------> LTDC_DE 
+    PK7     ------> LTDC_DE
     */
     HAL_GPIO_DeInit(GPIOI, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
-    HAL_GPIO_DeInit(GPIOJ, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7 
-                          |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOJ, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7
+                          |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
-    HAL_GPIO_DeInit(GPIOK, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
+    HAL_GPIO_DeInit(GPIOK, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                           |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
   /* USER CODE BEGIN LTDC_MspDeInit 1 */
@@ -536,18 +536,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -586,16 +586,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -624,12 +624,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI3 GPIO Configuration    
+    /**SPI3 GPIO Configuration
     PB3     ------> SPI3_SCK
     PB4     ------> SPI3_MISO
-    PB5     ------> SPI3_MOSI 
+    PB5     ------> SPI3_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -662,11 +662,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI3_CLK_DISABLE();
-  
-    /**SPI3 GPIO Configuration    
+
+    /**SPI3 GPIO Configuration
     PB3     ------> SPI3_SCK
     PB4     ------> SPI3_MISO
-    PB5     ------> SPI3_MOSI 
+    PB5     ------> SPI3_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -742,10 +742,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM2_MspPostInit 0 */
 
   /* USER CODE END TIM2_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PA0/WKUP     ------> TIM2_CH1 
+    /**TIM2 GPIO Configuration
+    PA0/WKUP     ------> TIM2_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -834,11 +834,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -874,10 +874,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -903,8 +903,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PI9   ------> FMC_D30
   PI10   ------> FMC_D31
   PF0   ------> FMC_A0
@@ -965,8 +965,8 @@ static void HAL_FMC_MspInit(void){
   PI6   ------> FMC_D28
   PI7   ------> FMC_D29
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1 
-                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5 
+  GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
+                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_6|GPIO_PIN_7;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -974,8 +974,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -983,8 +983,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_8 
-                          |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_8
+                          |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -992,7 +992,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1000,8 +1000,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1009,8 +1009,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
-                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
+                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4
                           |GPIO_PIN_5;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1055,8 +1055,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PI9   ------> FMC_D30
   PI10   ------> FMC_D31
   PF0   ------> FMC_A0
@@ -1117,27 +1117,27 @@ static void HAL_FMC_MspDeInit(void){
   PI6   ------> FMC_D28
   PI7   ------> FMC_D29
   */
-  HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1 
-                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5 
+  HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
+                          |GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_6|GPIO_PIN_7);
 
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_8 
-                          |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_8
+                          |GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
-                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
+                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4
                           |GPIO_PIN_5);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f429-atk-apollo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f429-atk-apollo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index ad60e8e19a..0d0405b7a1 100644
--- a/bsp/stm32/stm32f429-atk-apollo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f429-atk-apollo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -115,10 +115,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -147,9 +147,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
 
@@ -176,11 +176,11 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -189,7 +189,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PG11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -234,8 +234,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -244,7 +244,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PG11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -319,18 +319,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -367,16 +367,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -404,13 +404,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PB3     ------> SPI1_SCK
-    PB5     ------> SPI1_MOSI 
+    PB5     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -437,12 +437,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -462,12 +462,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -498,11 +498,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PB3     ------> SPI1_SCK
-    PB5     ------> SPI1_MOSI 
+    PB5     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6);
 
@@ -519,11 +519,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -538,11 +538,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
 
@@ -616,10 +616,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM2_MspPostInit 0 */
 
   /* USER CODE END TIM2_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PA3     ------> TIM2_CH4 
+    /**TIM2 GPIO Configuration
+    PA3     ------> TIM2_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -701,16 +701,16 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   if(huart->Instance==USART1)
   {
   /* USER CODE BEGIN USART1_MspInit 0 */
-      
+
 
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -733,11 +733,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -757,11 +757,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -792,10 +792,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -812,10 +812,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
 
@@ -830,10 +830,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -858,11 +858,11 @@ void HAL_HCD_MspInit(HCD_HandleTypeDef* hhcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -898,10 +898,10 @@ void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hhcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
 
@@ -927,8 +927,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -969,8 +969,8 @@ static void HAL_FMC_MspInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -985,7 +985,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -993,8 +993,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1002,7 +1002,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1037,8 +1037,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -1079,20 +1079,20 @@ static void HAL_FMC_MspDeInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
@@ -1125,12 +1125,12 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
        __HAL_RCC_SAI1_CLK_ENABLE();
     }
     SAI1_client ++;
-    
-    /**SAI1_A_Block_A GPIO Configuration    
+
+    /**SAI1_A_Block_A GPIO Configuration
     PE2     ------> SAI1_MCLK_A
     PE4     ------> SAI1_FS_A
     PE5     ------> SAI1_SCK_A
-    PE6     ------> SAI1_SD_A 
+    PE6     ------> SAI1_SD_A
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1148,9 +1148,9 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
        __HAL_RCC_SAI1_CLK_ENABLE();
       }
     SAI1_client ++;
-    
-    /**SAI1_B_Block_B GPIO Configuration    
-    PE3     ------> SAI1_SD_B 
+
+    /**SAI1_B_Block_B GPIO Configuration
+    PE3     ------> SAI1_SD_B
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1171,15 +1171,15 @@ void HAL_SAI_MspDeInit(SAI_HandleTypeDef* hsai)
     SAI1_client --;
     if (SAI1_client == 0)
       {
-      /* Peripheral clock disable */ 
+      /* Peripheral clock disable */
        __HAL_RCC_SAI1_CLK_DISABLE();
       }
-    
-    /**SAI1_A_Block_A GPIO Configuration    
+
+    /**SAI1_A_Block_A GPIO Configuration
     PE2     ------> SAI1_MCLK_A
     PE4     ------> SAI1_FS_A
     PE5     ------> SAI1_SCK_A
-    PE6     ------> SAI1_SD_A 
+    PE6     ------> SAI1_SD_A
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);
 
@@ -1192,9 +1192,9 @@ void HAL_SAI_MspDeInit(SAI_HandleTypeDef* hsai)
       /* Peripheral clock disable */
       __HAL_RCC_SAI1_CLK_DISABLE();
       }
-    
-    /**SAI1_B_Block_B GPIO Configuration    
-    PE3     ------> SAI1_SD_B 
+
+    /**SAI1_B_Block_B GPIO Configuration
+    PE3     ------> SAI1_SD_B
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/CubeMX_Config.ioc
index b23d058006..40485e9361 100644
--- a/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/CubeMX_Config.ioc
@@ -153,6 +153,12 @@ NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=RGB888
@@ -170,8 +176,6 @@ PA3.Mode=RGB888
 PA3.Signal=LTDC_B5
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB0.Locked=true
 PB0.Mode=RGB888
 PB0.Signal=LTDC_R3
diff --git a/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 380fd93b83..059f740127 100644
--- a/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f429-fire-challenger/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -116,10 +116,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PC3     ------> ADC1_IN13 
+    /**ADC1 GPIO Configuration
+    PC3     ------> ADC1_IN13
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -150,9 +150,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PC3     ------> ADC1_IN13 
+
+    /**ADC1 GPIO Configuration
+    PC3     ------> ADC1_IN13
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
 
@@ -227,12 +227,12 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -241,7 +241,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -295,8 +295,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -305,7 +305,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -339,7 +339,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
@@ -349,7 +349,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PE5     ------> LTDC_G0
     PE6     ------> LTDC_G1
@@ -377,7 +377,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B1
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI4     ------> LTDC_B4 
+    PI4     ------> LTDC_B4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -386,7 +386,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2 
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2
                           |GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -401,7 +401,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13 
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13
                           |GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -482,8 +482,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PE5     ------> LTDC_G0
     PE6     ------> LTDC_G1
@@ -511,23 +511,23 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B1
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI4     ------> LTDC_B4 
+    PI4     ------> LTDC_B4
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);
 
-    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2 
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2
                           |GPIO_PIN_4);
 
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
 
-    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13 
+    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13
                           |GPIO_PIN_15);
 
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_3|GPIO_PIN_11|GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_8|GPIO_PIN_9);
 
-    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7);
@@ -605,18 +605,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -655,16 +655,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC8     ------> SDIO_D0
     PC9     ------> SDIO_D1
     PC10     ------> SDIO_D2
     PC11     ------> SDIO_D3
     PC12     ------> SDIO_CK
-    PD2     ------> SDIO_CMD 
+    PD2     ------> SDIO_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -693,12 +693,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -731,11 +731,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
 
@@ -811,12 +811,12 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM5_MspPostInit 0 */
 
   /* USER CODE END TIM5_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
-    /**TIM5 GPIO Configuration    
+    /**TIM5 GPIO Configuration
     PH10     ------> TIM5_CH1
     PH11     ------> TIM5_CH2
-    PH12     ------> TIM5_CH3 
+    PH12     ------> TIM5_CH3
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -905,11 +905,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -945,10 +945,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -974,8 +974,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -1015,8 +1015,8 @@ static void HAL_FMC_MspInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1031,7 +1031,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1039,8 +1039,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1055,7 +1055,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1090,8 +1090,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -1131,22 +1131,22 @@ static void HAL_FMC_MspDeInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   HAL_GPIO_DeInit(GPIOH, GPIO_PIN_6|GPIO_PIN_7);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
index 235ba2c905..058533f6dd 100644
--- a/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
@@ -194,15 +194,15 @@ PA1.GPIO_ModeDefaultEXTI=GPIO_MODE_EVT_RISING
 PA1.GPIO_PuPd=GPIO_NOPULL
 PA1.Locked=true
 PA1.Signal=GPXTI1
-PA10.GPIOParameters=GPIO_Label
+PA10.GPIOParameters=GPIO_Label,GPIO_PuPd
 PA10.GPIO_Label=STLINK_TX [STM32F103CBT6_PA2]
-PA10.Locked=true
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA11.GPIO_Label=R4
 PA11.GPIO_Mode=GPIO_MODE_AF_PP
-PA11.GPIO_PuPd=GPIO_NOPULL
+PA11.GPIO_PuPd=GPIO_PULLUP
 PA11.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA11.Locked=true
 PA11.Mode=RGB565
@@ -210,7 +210,7 @@ PA11.Signal=LTDC_R4
 PA12.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA12.GPIO_Label=R5
 PA12.GPIO_Mode=GPIO_MODE_AF_PP
-PA12.GPIO_PuPd=GPIO_NOPULL
+PA12.GPIO_PuPd=GPIO_PULLUP
 PA12.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA12.Locked=true
 PA12.Mode=RGB565
@@ -276,9 +276,9 @@ PA8.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA8.Locked=true
 PA8.Mode=I2C
 PA8.Signal=I2C3_SCL
-PA9.GPIOParameters=GPIO_Label
+PA9.GPIOParameters=GPIO_Label,GPIO_PULLUP
 PA9.GPIO_Label=STLINK_RX [STM32F103CBT6_PA3]
-PA9.Locked=true
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
 PB0.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
diff --git a/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index e4cc442eb3..ca708938e4 100644
--- a/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f429-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -187,12 +187,12 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE BEGIN I2C3_MspInit 0 */
 
   /* USER CODE END I2C3_MspInit 0 */
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**I2C3 GPIO Configuration    
+    /**I2C3 GPIO Configuration
     PC9     ------> I2C3_SDA
-    PA8     ------> I2C3_SCL 
+    PA8     ------> I2C3_SCL
     */
     GPIO_InitStruct.Pin = I2C3_SDA_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
@@ -232,10 +232,10 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
   /* USER CODE END I2C3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_I2C3_CLK_DISABLE();
-  
-    /**I2C3 GPIO Configuration    
+
+    /**I2C3 GPIO Configuration
     PC9     ------> I2C3_SDA
-    PA8     ------> I2C3_SCL 
+    PA8     ------> I2C3_SCL
     */
     HAL_GPIO_DeInit(I2C3_SDA_GPIO_Port, I2C3_SDA_Pin);
 
@@ -264,14 +264,14 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PF10     ------> LTDC_DE
     PA3     ------> LTDC_B5
     PA4     ------> LTDC_VSYNC
@@ -293,7 +293,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PG11     ------> LTDC_B3
     PG12     ------> LTDC_B4
     PB8     ------> LTDC_B6
-    PB9     ------> LTDC_B7 
+    PB9     ------> LTDC_B7
     */
     GPIO_InitStruct.Pin = ENABLE_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -302,7 +302,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(ENABLE_GPIO_Port, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = B5_Pin|VSYNC_Pin|G2_Pin|R4_Pin 
+    GPIO_InitStruct.Pin = B5_Pin|VSYNC_Pin|G2_Pin|R4_Pin
                           |R5_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -377,8 +377,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PF10     ------> LTDC_DE
     PA3     ------> LTDC_B5
     PA4     ------> LTDC_VSYNC
@@ -400,17 +400,17 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PG11     ------> LTDC_B3
     PG12     ------> LTDC_B4
     PB8     ------> LTDC_B6
-    PB9     ------> LTDC_B7 
+    PB9     ------> LTDC_B7
     */
     HAL_GPIO_DeInit(ENABLE_GPIO_Port, ENABLE_Pin);
 
-    HAL_GPIO_DeInit(GPIOA, B5_Pin|VSYNC_Pin|G2_Pin|R4_Pin 
+    HAL_GPIO_DeInit(GPIOA, B5_Pin|VSYNC_Pin|G2_Pin|R4_Pin
                           |R5_Pin);
 
-    HAL_GPIO_DeInit(GPIOB, R3_Pin|R6_Pin|G4_Pin|G5_Pin 
+    HAL_GPIO_DeInit(GPIOB, R3_Pin|R6_Pin|G4_Pin|G5_Pin
                           |B6_Pin|B7_Pin);
 
-    HAL_GPIO_DeInit(GPIOG, R7_Pin|DOTCLK_Pin|G3_Pin|B3_Pin 
+    HAL_GPIO_DeInit(GPIOG, R7_Pin|DOTCLK_Pin|G3_Pin|B3_Pin
                           |B4_Pin);
 
     HAL_GPIO_DeInit(GPIOC, HSYNC_Pin|G6_Pin|R2_Pin);
@@ -442,12 +442,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     GPIO_InitStruct.Pin = SPI5_SCK_Pin|SPI5_MISO_Pin|SPI5_MOSI_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -478,11 +478,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF7     ------> SPI5_SCK
     PF8     ------> SPI5_MISO
-    PF9     ------> SPI5_MOSI 
+    PF9     ------> SPI5_MOSI
     */
     HAL_GPIO_DeInit(GPIOF, SPI5_SCK_Pin|SPI5_MISO_Pin|SPI5_MOSI_Pin);
 
@@ -553,11 +553,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = STLINK_RX_Pin|STLINK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -588,10 +588,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, STLINK_RX_Pin|STLINK_TX_Pin);
 
@@ -615,8 +615,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -656,8 +656,8 @@ static void HAL_FMC_MspInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  GPIO_InitStruct.Pin = A0_Pin|A1_Pin|A2_Pin|A3_Pin 
-                          |A4_Pin|A5_Pin|SDNRAS_Pin|A6_Pin 
+  GPIO_InitStruct.Pin = A0_Pin|A1_Pin|A2_Pin|A3_Pin
+                          |A4_Pin|A5_Pin|SDNRAS_Pin|A6_Pin
                           |A7_Pin|A8_Pin|A9_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -672,7 +672,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(SDNWE_GPIO_Port, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = A10_Pin|A11_Pin|BA0_Pin|BA1_Pin 
+  GPIO_InitStruct.Pin = A10_Pin|A11_Pin|BA0_Pin|BA1_Pin
                           |SDCLK_Pin|SDNCAS_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -680,8 +680,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = D4_Pin|D5_Pin|D6_Pin|D7_Pin 
-                          |D8_Pin|D9_Pin|D10_Pin|D11_Pin 
+  GPIO_InitStruct.Pin = D4_Pin|D5_Pin|D6_Pin|D7_Pin
+                          |D8_Pin|D9_Pin|D10_Pin|D11_Pin
                           |D12_Pin|NBL0_Pin|NBL1_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -689,7 +689,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = D13_Pin|D14_Pin|D15_Pin|D0_Pin 
+  GPIO_InitStruct.Pin = D13_Pin|D14_Pin|D15_Pin|D0_Pin
                           |D1_Pin|D2_Pin|D3_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -731,8 +731,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -772,20 +772,20 @@ static void HAL_FMC_MspDeInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, A0_Pin|A1_Pin|A2_Pin|A3_Pin 
-                          |A4_Pin|A5_Pin|SDNRAS_Pin|A6_Pin 
+  HAL_GPIO_DeInit(GPIOF, A0_Pin|A1_Pin|A2_Pin|A3_Pin
+                          |A4_Pin|A5_Pin|SDNRAS_Pin|A6_Pin
                           |A7_Pin|A8_Pin|A9_Pin);
 
   HAL_GPIO_DeInit(SDNWE_GPIO_Port, SDNWE_Pin);
 
-  HAL_GPIO_DeInit(GPIOG, A10_Pin|A11_Pin|BA0_Pin|BA1_Pin 
+  HAL_GPIO_DeInit(GPIOG, A10_Pin|A11_Pin|BA0_Pin|BA1_Pin
                           |SDCLK_Pin|SDNCAS_Pin);
 
-  HAL_GPIO_DeInit(GPIOE, D4_Pin|D5_Pin|D6_Pin|D7_Pin 
-                          |D8_Pin|D9_Pin|D10_Pin|D11_Pin 
+  HAL_GPIO_DeInit(GPIOE, D4_Pin|D5_Pin|D6_Pin|D7_Pin
+                          |D8_Pin|D9_Pin|D10_Pin|D11_Pin
                           |D12_Pin|NBL0_Pin|NBL1_Pin);
 
-  HAL_GPIO_DeInit(GPIOD, D13_Pin|D14_Pin|D15_Pin|D0_Pin 
+  HAL_GPIO_DeInit(GPIOD, D13_Pin|D14_Pin|D15_Pin|D0_Pin
                           |D1_Pin|D2_Pin|D3_Pin);
 
   HAL_GPIO_DeInit(GPIOB, SDCKE1_Pin|SDNE1_Pin);
diff --git a/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index ea2f9755c5..6293374ccd 100644
--- a/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -34,14 +34,14 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
-PA10.Mode=Asynchronous
-PA10.Signal=USART1_RX
-PA13.Mode=Serial_Wire
-PA13.Signal=SYS_JTMS-SWDIO
-PA14.Mode=Serial_Wire
-PA14.Signal=SYS_JTCK-SWCLK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index a299f50c87..23b216769b 100644
--- a/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f446-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,11 +114,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -151,10 +151,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
index ba698b848e..3e1042d18c 100644
--- a/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
@@ -182,10 +182,12 @@ PA15.GPIOParameters=GPIO_Speed
 PA15.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
 PA15.Mode=Half_Duplex_Master
 PA15.Signal=I2S3_WS
-PB10.Locked=true
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
-PB11.Locked=true
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PB3.GPIOParameters=GPIO_Speed
diff --git a/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
index 08cb949966..4c00b2386a 100644
--- a/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
+++ b/bsp/stm32/stm32f469-st-disco/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -58,7 +58,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -227,14 +227,14 @@ void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
   /* USER CODE END SPI3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**I2S3 GPIO Configuration    
+    /**I2S3 GPIO Configuration
     PB3     ------> I2S3_CK
     PA15     ------> I2S3_WS
-    PD6     ------> I2S3_SD 
+    PD6     ------> I2S3_SD
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -282,11 +282,11 @@ void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
   /* USER CODE END SPI3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI3_CLK_DISABLE();
-  
-    /**I2S3 GPIO Configuration    
+
+    /**I2S3 GPIO Configuration
     PB3     ------> I2S3_CK
     PA15     ------> I2S3_WS
-    PD6     ------> I2S3_SD 
+    PD6     ------> I2S3_SD
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3);
 
@@ -363,16 +363,16 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PB6     ------> QUADSPI_BK1_NCS
     PF7     ------> QUADSPI_BK1_IO2
     PF6     ------> QUADSPI_BK1_IO3
     PF10     ------> QUADSPI_CLK
     PF9     ------> QUADSPI_BK1_IO1
-    PF8     ------> QUADSPI_BK1_IO0 
+    PF8     ------> QUADSPI_BK1_IO0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -417,18 +417,18 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PB6     ------> QUADSPI_BK1_NCS
     PF7     ------> QUADSPI_BK1_IO2
     PF6     ------> QUADSPI_BK1_IO3
     PF10     ------> QUADSPI_CLK
     PF9     ------> QUADSPI_BK1_IO1
-    PF8     ------> QUADSPI_BK1_IO0 
+    PF8     ------> QUADSPI_BK1_IO0
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
 
-    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_10|GPIO_PIN_9 
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8);
 
   /* USER CODE BEGIN QUADSPI_MspDeInit 1 */
@@ -454,18 +454,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDIO_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDIO GPIO Configuration    
+    /**SDIO GPIO Configuration
     PC12     ------> SDIO_CK
     PC11     ------> SDIO_D3
     PC10     ------> SDIO_D2
     PD2     ------> SDIO_CMD
     PC9     ------> SDIO_D1
-    PC8     ------> SDIO_D0 
+    PC8     ------> SDIO_D0
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -502,16 +502,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDIO_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDIO_CLK_DISABLE();
-  
-    /**SDIO GPIO Configuration    
+
+    /**SDIO GPIO Configuration
     PC12     ------> SDIO_CK
     PC11     ------> SDIO_D3
     PC10     ------> SDIO_D2
     PD2     ------> SDIO_CMD
     PC9     ------> SDIO_D1
-    PC8     ------> SDIO_D0 
+    PC8     ------> SDIO_D0
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -539,10 +539,10 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM4_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_TIM4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
-    PD12     ------> TIM4_CH1 
+    /**TIM4 GPIO Configuration
+    PD12     ------> TIM4_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -566,10 +566,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM4_MspPostInit 0 */
 
   /* USER CODE END TIM4_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
-    PD13     ------> TIM4_CH2 
+    /**TIM4 GPIO Configuration
+    PD13     ------> TIM4_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -599,10 +599,10 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_TIM4_CLK_DISABLE();
-  
-    /**TIM4 GPIO Configuration    
+
+    /**TIM4 GPIO Configuration
     PD12     ------> TIM4_CH1
-    PD13     ------> TIM4_CH2 
+    PD13     ------> TIM4_CH2
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_12|GPIO_PIN_13);
 
@@ -629,11 +629,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -664,10 +664,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -692,11 +692,11 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA12     ------> USB_OTG_FS_DP
-    PA11     ------> USB_OTG_FS_DM 
+    PA11     ------> USB_OTG_FS_DM
     */
     GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -732,10 +732,10 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA12     ------> USB_OTG_FS_DP
-    PA11     ------> USB_OTG_FS_DM 
+    PA11     ------> USB_OTG_FS_DM
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_12|GPIO_PIN_11);
 
@@ -761,8 +761,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PE1   ------> FMC_NBL1
   PE0   ------> FMC_NBL0
   PG15   ------> FMC_SDNCAS
@@ -820,8 +820,8 @@ static void HAL_FMC_MspInit(void){
   PE15   ------> FMC_D12
   PE13   ------> FMC_D10
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_8|GPIO_PIN_9 
-                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_10 
+  GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_8|GPIO_PIN_9
+                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_10
                           |GPIO_PIN_12|GPIO_PIN_15|GPIO_PIN_13;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -829,7 +829,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0 
+  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0
                           |GPIO_PIN_5|GPIO_PIN_4;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -837,7 +837,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10
                           |GPIO_PIN_14|GPIO_PIN_9|GPIO_PIN_8;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -845,8 +845,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_2|GPIO_PIN_5 
-                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_6|GPIO_PIN_1 
+  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_2|GPIO_PIN_5
+                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_6|GPIO_PIN_1
                           |GPIO_PIN_9|GPIO_PIN_0;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -854,8 +854,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -863,8 +863,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_3 
-                          |GPIO_PIN_2|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11 
+  GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_3
+                          |GPIO_PIN_2|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11
                           |GPIO_PIN_8|GPIO_PIN_10;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -906,8 +906,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PE1   ------> FMC_NBL1
   PE0   ------> FMC_NBL0
   PG15   ------> FMC_SDNCAS
@@ -965,26 +965,26 @@ static void HAL_FMC_MspDeInit(void){
   PE15   ------> FMC_D12
   PE13   ------> FMC_D10
   */
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_8|GPIO_PIN_9 
-                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_10 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_8|GPIO_PIN_9
+                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_10
                           |GPIO_PIN_12|GPIO_PIN_15|GPIO_PIN_13);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0
                           |GPIO_PIN_5|GPIO_PIN_4);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10
                           |GPIO_PIN_14|GPIO_PIN_9|GPIO_PIN_8);
 
-  HAL_GPIO_DeInit(GPIOI, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_2|GPIO_PIN_5 
-                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_6|GPIO_PIN_1 
+  HAL_GPIO_DeInit(GPIOI, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_2|GPIO_PIN_5
+                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_6|GPIO_PIN_1
                           |GPIO_PIN_9|GPIO_PIN_0);
 
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11);
 
-  HAL_GPIO_DeInit(GPIOH, GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_3 
-                          |GPIO_PIN_2|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11 
+  HAL_GPIO_DeInit(GPIOH, GPIO_PIN_15|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_3
+                          |GPIO_PIN_2|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11
                           |GPIO_PIN_8|GPIO_PIN_10);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
diff --git a/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
index 3813651ece..148a2ca783 100644
--- a/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
@@ -142,15 +142,18 @@ PA2.Mode=RMII
 PA2.Signal=ETH_MDIO
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PB7.GPIOParameters=GPIO_PuPd
+PB7.GPIO_PuPd=GPIO_PULLUP
+PB7.Mode=Asynchronous
+PB7.Signal=USART1_RX
 PB2.Mode=Single Bank 1
 PB2.Signal=QUADSPI_CLK
 PB6.Mode=Single Bank 1
 PB6.Signal=QUADSPI_BK1_NCS
-PB7.Mode=Asynchronous
-PB7.Signal=USART1_RX
 PC1.Mode=RMII
 PC1.Signal=ETH_MDC
 PC10.Mode=SD_4_bits_Wide_bus
diff --git a/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index fd77b00626..8f4696a1d7 100644
--- a/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,11 +113,11 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
     PG11     ------> ETH_TX_EN
@@ -126,7 +126,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC4     ------> ETH_RXD0
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
-    PA7     ------> ETH_CRS_DV 
+    PA7     ------> ETH_CRS_DV
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -171,8 +171,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
     PG11     ------> ETH_TX_EN
@@ -181,7 +181,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC4     ------> ETH_RXD0
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
-    PA7     ------> ETH_CRS_DV 
+    PA7     ------> ETH_CRS_DV
     */
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11);
 
@@ -212,13 +212,13 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOJ_CLK_ENABLE();
     __HAL_RCC_GPIOK_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PJ13     ------> LTDC_B1
     PK7     ------> LTDC_DE
@@ -246,7 +246,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PJ3     ------> LTDC_R4
     PJ2     ------> LTDC_R3
     PJ0     ------> LTDC_R1
-    PJ1     ------> LTDC_R2 
+    PJ1     ------> LTDC_R2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -255,9 +255,9 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_11 
-                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_7|GPIO_PIN_9 
-                          |GPIO_PIN_6|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_3 
+    GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_11
+                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_7|GPIO_PIN_9
+                          |GPIO_PIN_6|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_3
                           |GPIO_PIN_2|GPIO_PIN_0|GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -265,7 +265,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOJ, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_4 
+    GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_4
                           |GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -309,8 +309,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PJ13     ------> LTDC_B1
     PK7     ------> LTDC_DE
@@ -338,16 +338,16 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PJ3     ------> LTDC_R4
     PJ2     ------> LTDC_R3
     PJ0     ------> LTDC_R1
-    PJ1     ------> LTDC_R2 
+    PJ1     ------> LTDC_R2
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4);
 
-    HAL_GPIO_DeInit(GPIOJ, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_11 
-                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_7|GPIO_PIN_9 
-                          |GPIO_PIN_6|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_3 
+    HAL_GPIO_DeInit(GPIOJ, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_11
+                          |GPIO_PIN_8|GPIO_PIN_10|GPIO_PIN_7|GPIO_PIN_9
+                          |GPIO_PIN_6|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_3
                           |GPIO_PIN_2|GPIO_PIN_0|GPIO_PIN_1);
 
-    HAL_GPIO_DeInit(GPIOK, GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_4 
+    HAL_GPIO_DeInit(GPIOK, GPIO_PIN_7|GPIO_PIN_6|GPIO_PIN_5|GPIO_PIN_4
                           |GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_0);
 
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_12);
@@ -377,17 +377,17 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PE2     ------> QUADSPI_BK1_IO2
     PB6     ------> QUADSPI_BK1_NCS
     PB2     ------> QUADSPI_CLK
     PD12     ------> QUADSPI_BK1_IO1
     PD13     ------> QUADSPI_BK1_IO3
-    PD11     ------> QUADSPI_BK1_IO0 
+    PD11     ------> QUADSPI_BK1_IO0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -439,14 +439,14 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PE2     ------> QUADSPI_BK1_IO2
     PB6     ------> QUADSPI_BK1_NCS
     PB2     ------> QUADSPI_CLK
     PD12     ------> QUADSPI_BK1_IO1
     PD13     ------> QUADSPI_BK1_IO3
-    PD11     ------> QUADSPI_BK1_IO0 
+    PD11     ------> QUADSPI_BK1_IO0
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2);
 
@@ -477,18 +477,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC12     ------> SDMMC1_CK
     PC11     ------> SDMMC1_D3
     PC10     ------> SDMMC1_D2
     PD2     ------> SDMMC1_CMD
     PC9     ------> SDMMC1_D1
-    PC8     ------> SDMMC1_D0 
+    PC8     ------> SDMMC1_D0
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -525,16 +525,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC12     ------> SDMMC1_CK
     PC11     ------> SDMMC1_D3
     PC10     ------> SDMMC1_D2
     PD2     ------> SDMMC1_CMD
     PC9     ------> SDMMC1_D1
-    PC8     ------> SDMMC1_D0 
+    PC8     ------> SDMMC1_D0
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -606,23 +606,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PB7     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -649,10 +649,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PB7     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
 
@@ -678,8 +678,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PG15   ------> FMC_SDNCAS
   PD0   ------> FMC_D2
   PD1   ------> FMC_D3
@@ -771,8 +771,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PG15   ------> FMC_SDNCAS
   PD0   ------> FMC_D2
   PD1   ------> FMC_D3
@@ -809,22 +809,22 @@ static void HAL_FMC_MspDeInit(void){
   PE15   ------> FMC_D12
   PE13   ------> FMC_D10
   */
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_0|GPIO_PIN_5 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_0|GPIO_PIN_5
                           |GPIO_PIN_4);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10
                           |GPIO_PIN_14|GPIO_PIN_9|GPIO_PIN_8);
 
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11);
 
   HAL_GPIO_DeInit(GPIOH, GPIO_PIN_5|GPIO_PIN_3);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14 
-                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14
+                          |GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15
                           |GPIO_PIN_13);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
index 506854c422..e1b152b6e1 100644
--- a/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -161,7 +161,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Host_Only
@@ -182,9 +187,6 @@ PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
 PA8.Mode=RGB565
 PA8.Signal=LTDC_B3
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB0.Locked=true
 PB0.Signal=S_TIM3_CH3
 PB1.Mode=RGB565
diff --git a/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index 3fe29e92c9..988628d3d8 100644
--- a/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f767-atk-apollo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                                         /**
   * Initializes the Global MSP.
@@ -115,10 +115,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -147,9 +147,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
 
@@ -176,12 +176,12 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -190,7 +190,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -242,8 +242,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -252,7 +252,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PG13     ------> ETH_TXD0
-    PG14     ------> ETH_TXD1 
+    PG14     ------> ETH_TXD1
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -285,14 +285,14 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PI9     ------> LTDC_VSYNC
     PI10     ------> LTDC_HSYNC
     PI11     ------> LTDC_G6
@@ -312,7 +312,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B4
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI5     ------> LTDC_B5 
+    PI5     ------> LTDC_B5
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_2|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -413,8 +413,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PI9     ------> LTDC_VSYNC
     PI10     ------> LTDC_HSYNC
     PI11     ------> LTDC_G6
@@ -434,14 +434,14 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B4
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI5     ------> LTDC_B5 
+    PI5     ------> LTDC_B5
     */
-    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_2 
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_2
                           |GPIO_PIN_5);
 
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
 
-    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_4|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_4|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_14);
 
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_8);
@@ -473,16 +473,16 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -534,14 +534,14 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
 
@@ -614,18 +614,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -662,16 +662,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -699,12 +699,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -735,11 +735,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -836,8 +836,8 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
 
   /* USER CODE END TIM2_MspPostInit 0 */
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM2 GPIO Configuration    
-    PA3     ------> TIM2_CH4 
+    /**TIM2 GPIO Configuration
+    PA3     ------> TIM2_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -855,10 +855,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
-    PB0     ------> TIM3_CH3 
+    /**TIM3 GPIO Configuration
+    PB0     ------> TIM3_CH3
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -966,15 +966,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -990,15 +990,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -1025,10 +1025,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -1043,10 +1043,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PD5     ------> USART2_TX
-    PD6     ------> USART2_RX 
+    PD6     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
 
@@ -1071,11 +1071,11 @@ void HAL_HCD_MspInit(HCD_HandleTypeDef* hhcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1111,10 +1111,10 @@ void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hhcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
 
@@ -1140,8 +1140,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -1180,8 +1180,8 @@ static void HAL_FMC_MspInit(void){
   PD1   ------> FMC_D3
   PG15   ------> FMC_SDNCAS
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1196,7 +1196,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1204,8 +1204,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1213,7 +1213,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1248,8 +1248,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -1288,20 +1288,20 @@ static void HAL_FMC_MspDeInit(void){
   PD1   ------> FMC_D3
   PG15   ------> FMC_SDNCAS
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/CubeMX_Config.ioc
index c9b386e6ca..bc1a38ca7c 100644
--- a/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/CubeMX_Config.ioc
@@ -138,7 +138,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.GPIOParameters=GPIO_Speed
@@ -160,9 +165,6 @@ PA3.Signal=LTDC_B5
 PA5.Signal=ADCx_IN5
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB0.GPIOParameters=GPIO_Speed
 PB0.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 PB0.Mode=RGB888
diff --git a/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index a395939496..785137daf5 100644
--- a/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f767-fire-challenger-v1/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,10 +113,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -145,9 +145,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC1_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PA5     ------> ADC1_IN5 
+
+    /**ADC1 GPIO Configuration
+    PA5     ------> ADC1_IN5
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);
 
@@ -218,11 +218,11 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -231,7 +231,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PB12     ------> ETH_TXD0
-    PB13     ------> ETH_TXD1 
+    PB13     ------> ETH_TXD1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -276,8 +276,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -286,7 +286,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB11     ------> ETH_TX_EN
     PB12     ------> ETH_TXD0
-    PB13     ------> ETH_TXD1 
+    PB13     ------> ETH_TXD1
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
 
@@ -317,7 +317,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
@@ -327,7 +327,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PE5     ------> LTDC_G0
     PE6     ------> LTDC_G1
@@ -355,7 +355,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B1
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI4     ------> LTDC_B4 
+    PI4     ------> LTDC_B4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -364,7 +364,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2 
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2
                           |GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -379,7 +379,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13 
+    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13
                           |GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -465,8 +465,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PE4     ------> LTDC_B0
     PE5     ------> LTDC_G0
     PE6     ------> LTDC_G1
@@ -494,23 +494,23 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PG12     ------> LTDC_B1
     PB8     ------> LTDC_B6
     PB9     ------> LTDC_B7
-    PI4     ------> LTDC_B4 
+    PI4     ------> LTDC_B4
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);
 
-    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2 
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_2
                           |GPIO_PIN_4);
 
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
 
-    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13 
+    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_13
                           |GPIO_PIN_15);
 
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_3|GPIO_PIN_11|GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_8|GPIO_PIN_9);
 
-    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7);
@@ -540,16 +540,16 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -601,14 +601,14 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
 
@@ -637,18 +637,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -685,16 +685,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -722,15 +722,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -757,10 +757,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -784,8 +784,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -825,8 +825,8 @@ static void HAL_FMC_MspInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -841,7 +841,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -849,8 +849,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -865,7 +865,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -900,8 +900,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -941,22 +941,22 @@ static void HAL_FMC_MspDeInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5
                           |GPIO_PIN_8|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   HAL_GPIO_DeInit(GPIOH, GPIO_PIN_6|GPIO_PIN_7);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index 770d50f63e..7306fcf76f 100644
--- a/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f767-st-nucleo/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -114,12 +114,12 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -128,7 +128,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     GPIO_InitStruct.Pin = RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -182,8 +182,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PC1     ------> ETH_MDC
     PA1     ------> ETH_REF_CLK
     PA2     ------> ETH_MDIO
@@ -192,7 +192,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC5     ------> ETH_RXD1
     PB13     ------> ETH_TXD1
     PG11     ------> ETH_TX_EN
-    PG13     ------> ETH_TXD0 
+    PG13     ------> ETH_TXD0
     */
     HAL_GPIO_DeInit(GPIOC, RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin);
 
@@ -226,15 +226,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -263,10 +263,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, STLK_RX_Pin|STLK_TX_Pin);
 
@@ -292,14 +292,14 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -339,15 +339,15 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
-    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin 
+    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin
                           |USB_DP_Pin);
 
   /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
diff --git a/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
index 73e883d6c0..f4bc362e25 100644
--- a/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
@@ -60,7 +60,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Mode=MII
 PA1.Signal=ETH_RX_CLK
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13.Mode=Serial_Wire
@@ -71,9 +76,6 @@ PA2.Mode=MII
 PA2.Signal=ETH_MDIO
 PA7.Mode=MII
 PA7.Signal=ETH_RX_DV
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PC1.Mode=MII
 PC1.Signal=ETH_MDC
 PC12.Locked=true
diff --git a/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c b/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
index 99a22fec0f..4f8f77a12b 100644
--- a/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
+++ b/bsp/stm32/stm32f769-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32f7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,13 +93,13 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ETH_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PE2     ------> ETH_TXD3
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
@@ -115,7 +115,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
     PH6     ------> ETH_RXD2
-    PA7     ------> ETH_RX_DV 
+    PA7     ------> ETH_RX_DV
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -138,7 +138,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
     HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -175,8 +175,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
   /* USER CODE END ETH_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ETH_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PE2     ------> ETH_TXD3
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
@@ -192,7 +192,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
     PH6     ------> ETH_RXD2
-    PA7     ------> ETH_RX_DV 
+    PA7     ------> ETH_RX_DV
     */
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2);
 
@@ -200,7 +200,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
 
     HAL_GPIO_DeInit(GPIOH, GPIO_PIN_3|GPIO_PIN_2|GPIO_PIN_7|GPIO_PIN_6);
 
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5);
 
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
@@ -228,23 +228,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART5_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**UART5 GPIO Configuration    
+    /**UART5 GPIO Configuration
     PC12     ------> UART5_TX
-    PD2     ------> UART5_RX 
+    PD2     ------> UART5_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART5;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART5;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -260,15 +260,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -295,10 +295,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART5_CLK_DISABLE();
-  
-    /**UART5 GPIO Configuration    
+
+    /**UART5 GPIO Configuration
     PC12     ------> UART5_TX
-    PD2     ------> UART5_RX 
+    PD2     ------> UART5_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12);
 
@@ -315,10 +315,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_10|GPIO_PIN_9);
 
diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
index 7c05429633..3c74feb4d2 100644
--- a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
+++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32g0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -58,7 +58,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -95,10 +95,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PA0     ------> ADC1_IN0 
+    /**ADC1 GPIO Configuration
+    PA0     ------> ADC1_IN0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -127,9 +127,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
-    PA0     ------> ADC1_IN0 
+
+    /**ADC1 GPIO Configuration
+    PA0     ------> ADC1_IN0
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);
 
@@ -202,12 +202,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA11 [PA9]     ------> SPI1_MISO
-    PA12 [PA10]     ------> SPI1_MOSI 
+    PA12 [PA10]     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -227,13 +227,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB10     ------> SPI2_SCK 
+    PB10     ------> SPI2_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -271,11 +271,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA11 [PA9]     ------> SPI1_MISO
-    PA12 [PA10]     ------> SPI1_MOSI 
+    PA12 [PA10]     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12);
 
@@ -290,11 +290,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB10     ------> SPI2_SCK 
+    PB10     ------> SPI2_SCK
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -348,14 +348,14 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PA6     ------> TIM3_CH1
     PA7     ------> TIM3_CH2
     PB0     ------> TIM3_CH3
-    PB1     ------> TIM3_CH4 
+    PB1     ------> TIM3_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -426,15 +426,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
@@ -450,11 +450,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -474,23 +474,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PC11     ------> USART3_RX
-    PB2     ------> USART3_TX 
+    PB2     ------> USART3_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF0_USART3;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF4_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -517,10 +517,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
 
@@ -535,10 +535,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -553,10 +553,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PC11     ------> USART3_RX
-    PB2     ------> USART3_TX 
+    PB2     ------> USART3_TX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11);
 
diff --git a/bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c b/bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
index 3cfed698d3..5dc12fb616 100644
--- a/bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
+++ b/bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32g0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -116,11 +116,11 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
+    /**ADC1 GPIO Configuration
     PA0     ------> ADC1_IN0
-    PA1     ------> ADC1_IN1 
+    PA1     ------> ADC1_IN1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -151,10 +151,10 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
+
+    /**ADC1 GPIO Configuration
     PA0     ------> ADC1_IN0
-    PA1     ------> ADC1_IN1 
+    PA1     ------> ADC1_IN1
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1);
 
@@ -182,11 +182,11 @@ void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DAC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**DAC1 GPIO Configuration    
+    /**DAC1 GPIO Configuration
     PA4     ------> DAC1_OUT1
-    PA5     ------> DAC1_OUT2 
+    PA5     ------> DAC1_OUT2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -217,10 +217,10 @@ void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DAC1_CLK_DISABLE();
-  
-    /**DAC1 GPIO Configuration    
+
+    /**DAC1 GPIO Configuration
     PA4     ------> DAC1_OUT1
-    PA5     ------> DAC1_OUT2 
+    PA5     ------> DAC1_OUT2
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5);
 
@@ -248,15 +248,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LPUART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**LPUART1 GPIO Configuration    
+    /**LPUART1 GPIO Configuration
     PA2     ------> LPUART1_TX
-    PA3     ------> LPUART1_RX 
+    PA3     ------> LPUART1_RX
     */
     GPIO_InitStruct.Pin = LPUART1_TX_Pin|LPUART1_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF6_LPUART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -275,11 +275,11 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -299,12 +299,12 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA15     ------> USART2_RX
-    PD5     ------> USART2_TX 
+    PD5     ------> USART2_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -331,12 +331,12 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PC11     ------> USART3_RX
-    PB2     ------> USART3_TX 
+    PB2     ------> USART3_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -379,10 +379,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LPUART1_CLK_DISABLE();
-  
-    /**LPUART1 GPIO Configuration    
+
+    /**LPUART1 GPIO Configuration
     PA2     ------> LPUART1_TX
-    PA3     ------> LPUART1_RX 
+    PA3     ------> LPUART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, LPUART1_TX_Pin|LPUART1_RX_Pin);
 
@@ -406,10 +406,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
 
@@ -424,10 +424,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA15     ------> USART2_RX
-    PD5     ------> USART2_TX 
+    PD5     ------> USART2_TX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_15);
 
@@ -444,10 +444,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PC11     ------> USART3_RX
-    PB2     ------> USART3_TX 
+    PB2     ------> USART3_TX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11);
 
@@ -486,13 +486,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PA7     ------> SPI1_MOSI
-    PD8     ------> SPI1_SCK 
+    PD8     ------> SPI1_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -519,13 +519,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB13     ------> SPI2_SCK 
+    PB13     ------> SPI2_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -565,11 +565,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA6     ------> SPI1_MISO
     PA7     ------> SPI1_MOSI
-    PD8     ------> SPI1_SCK 
+    PD8     ------> SPI1_SCK
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_7);
 
@@ -586,11 +586,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC2     ------> SPI2_MISO
     PC3     ------> SPI2_MOSI
-    PB13     ------> SPI2_SCK 
+    PB13     ------> SPI2_SCK
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -646,14 +646,14 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PB0     ------> TIM3_CH3
     PB1     ------> TIM3_CH4
     PC6     ------> TIM3_CH1
-    PC7     ------> TIM3_CH2 
+    PC7     ------> TIM3_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
diff --git a/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 420cba6a01..854757a8f5 100644
--- a/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -57,18 +57,24 @@ PA14.GPIO_Label=T_SWCLK
 PA14.Locked=true
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA2.Locked=true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
-PA2.Signal=LPUART1_TX
-PA3.Locked=true
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
-PA3.Signal=LPUART1_RX
+PA3.Signal=USART2_RX
 PA5.GPIOParameters=GPIO_Label
 PA5.GPIO_Label=LD2 [green]
 PA5.Locked=true
 PA5.Signal=GPIO_Output
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PB3.GPIOParameters=GPIO_Label
diff --git a/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/Src/stm32g4xx_hal_msp.c b/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/Src/stm32g4xx_hal_msp.c
index 759ac0f62c..51088806a3 100644
--- a/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/Src/stm32g4xx_hal_msp.c
+++ b/bsp/stm32/stm32g431-st-nucleo/board/CubeMX_Config/Src/stm32g4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32g4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -72,7 +72,7 @@ void HAL_MspInit(void)
 
   /* System interrupt init*/
 
-  /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral 
+  /** Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral
   */
   LL_PWR_DisableDeadBatteryPD();
 
@@ -97,15 +97,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LPUART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**LPUART1 GPIO Configuration    
+    /**LPUART1 GPIO Configuration
     PA2     ------> LPUART1_TX
-    PA3     ------> LPUART1_RX 
+    PA3     ------> LPUART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF12_LPUART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -121,15 +121,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF5_UART4;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
@@ -145,15 +145,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = USART1_TX_Pin|USART1_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
@@ -169,15 +169,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -204,10 +204,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LPUART1_CLK_DISABLE();
-  
-    /**LPUART1 GPIO Configuration    
+
+    /**LPUART1 GPIO Configuration
     PA2     ------> LPUART1_TX
-    PA3     ------> LPUART1_RX 
+    PA3     ------> LPUART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -222,10 +222,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PC10     ------> UART4_TX
-    PC11     ------> UART4_RX 
+    PC11     ------> UART4_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -240,10 +240,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PC4     ------> USART1_TX
-    PC5     ------> USART1_RX 
+    PC5     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOC, USART1_TX_Pin|USART1_RX_Pin);
 
@@ -258,10 +258,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB11     ------> USART3_RX 
+    PB11     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
diff --git a/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
index fd2d5efe67..7ef3f3f109 100644
--- a/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -161,23 +161,29 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13\ (JTMS/SWDIO).Mode=Serial_Wire
 PA13\ (JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO
 PA14\ (JTCK/SWCLK).Mode=Serial_Wire
 PA14\ (JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA4.Signal=COMP_DAC11_group
 PA5.Locked=true
 PA5.Signal=ADCx_INP19
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB13.GPIOParameters=GPIO_Speed
 PB13.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
 PB13.Locked=true
diff --git a/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
index 42d6806ff0..fef02fcddd 100644
--- a/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -278,12 +278,12 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LTDC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**LTDC GPIO Configuration    
+    /**LTDC GPIO Configuration
     PI9     ------> LTDC_VSYNC
     PI10     ------> LTDC_HSYNC
     PF10     ------> LTDC_DE
@@ -303,10 +303,10 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     PI4     ------> LTDC_B4
     PI5     ------> LTDC_B5
     PI6     ------> LTDC_B6
-    PI7     ------> LTDC_B7 
+    PI7     ------> LTDC_B7
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1 
-                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6 
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
+                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
                           |GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -321,7 +321,7 @@ void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
     GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
     HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 
+    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -358,8 +358,8 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
   /* USER CODE END LTDC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LTDC_CLK_DISABLE();
-  
-    /**LTDC GPIO Configuration    
+
+    /**LTDC GPIO Configuration
     PI9     ------> LTDC_VSYNC
     PI10     ------> LTDC_HSYNC
     PF10     ------> LTDC_DE
@@ -379,15 +379,15 @@ void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
     PI4     ------> LTDC_B4
     PI5     ------> LTDC_B5
     PI6     ------> LTDC_B6
-    PI7     ------> LTDC_B7 
+    PI7     ------> LTDC_B7
     */
-    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1 
-                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6 
+    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
+                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
                           |GPIO_PIN_7);
 
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
 
-    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 
+    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_11);
@@ -415,16 +415,16 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -476,14 +476,14 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PF6     ------> QUADSPI_BK1_IO3
     PF7     ------> QUADSPI_BK1_IO2
     PF8     ------> QUADSPI_BK1_IO0
     PF9     ------> QUADSPI_BK1_IO1
     PB2     ------> QUADSPI_CLK
-    PB6     ------> QUADSPI_BK1_NCS 
+    PB6     ------> QUADSPI_BK1_NCS
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
 
@@ -512,10 +512,10 @@ void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
   /* USER CODE END RTC_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_RTC_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**RTC GPIO Configuration    
-    PC13     ------> RTC_OUT_CALIB 
+    /**RTC GPIO Configuration
+    PC13     ------> RTC_OUT_CALIB
     */
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
@@ -541,9 +541,9 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
   /* USER CODE END RTC_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_RTC_DISABLE();
-  
-    /**RTC GPIO Configuration    
-    PC13     ------> RTC_OUT_CALIB 
+
+    /**RTC GPIO Configuration
+    PC13     ------> RTC_OUT_CALIB
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_13);
 
@@ -570,18 +570,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -621,16 +621,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -660,12 +660,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -696,11 +696,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PB13     ------> SPI2_SCK
     PB14     ------> SPI2_MISO
-    PB15     ------> SPI2_MOSI 
+    PB15     ------> SPI2_MOSI
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
@@ -727,15 +727,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -754,15 +754,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -792,10 +792,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -812,10 +812,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -842,8 +842,8 @@ static void HAL_FMC_MspInit(void){
 
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -884,8 +884,8 @@ static void HAL_FMC_MspInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -900,7 +900,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -908,8 +908,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -917,7 +917,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -952,8 +952,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PF0   ------> FMC_A0
   PF1   ------> FMC_A1
   PF2   ------> FMC_A2
@@ -994,20 +994,20 @@ static void HAL_FMC_MspDeInit(void){
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   */
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                           |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
 
   HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                           |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15);
 
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10 
-                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
+                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                           |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32h743-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h743-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
index 60881f1c22..099374e220 100644
--- a/bsp/stm32/stm32h743-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h743-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,15 +92,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -127,10 +127,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9);
 
diff --git a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_hal_msp.c
index 858912e780..c291e0ff67 100644
--- a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM4/Src/stm32h7xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
diff --git a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c
index b2f1998e9b..02fb8a88f2 100644
--- a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CM7/Src/stm32h7xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -92,15 +92,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -127,10 +127,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_10|GPIO_PIN_9);
 
diff --git a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
index 7e5db8c6e6..83eefbe36d 100644
--- a/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32h747-st-discovery/board/CubeMX_Config/CubeMX_Config.ioc
@@ -52,13 +52,15 @@ NVIC2.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC2.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC2.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC2.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA10.GPIOParameters=PinAttribute
+PA10.GPIOParameters=PinAttribute,GPIO_PuPd
 PA10.Locked=true
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.PinAttribute=CortexM7
 PA10.Signal=USART1_RX
-PA9.GPIOParameters=PinAttribute
+PA9.GPIOParameters=PinAttribute,GPIO_PuPd
 PA9.Locked=true
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.PinAttribute=CortexM7
 PA9.Signal=USART1_TX
diff --git a/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc
index d7da87788c..fd677d2731 100644
--- a/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc
@@ -103,7 +103,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PA1.Mode=RMII
 PA1.Signal=ETH_REF_CLK
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA2.Mode=RMII
@@ -115,9 +120,6 @@ PA5.Mode=Device_HS
 PA5.Signal=USB_OTG_HS_ULPI_CK
 PA7.Mode=RMII
 PA7.Signal=ETH_CRS_DV
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB0.Mode=Device_HS
 PB0.Signal=USB_OTG_HS_ULPI_D1
 PB1.Mode=Device_HS
diff --git a/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
index 690d875704..726068cad2 100644
--- a/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32h7xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -58,7 +58,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -94,11 +94,11 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**ADC3 GPIO Configuration    
+    /**ADC3 GPIO Configuration
     PF3     ------> ADC3_INP5
-    PF8     ------> ADC3_INP7 
+    PF8     ------> ADC3_INP7
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -127,10 +127,10 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC3_CLK_DISABLE();
-  
-    /**ADC3 GPIO Configuration    
+
+    /**ADC3 GPIO Configuration
     PF3     ------> ADC3_INP5
-    PF8     ------> ADC3_INP7 
+    PF8     ------> ADC3_INP7
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_3|GPIO_PIN_8);
 
@@ -201,10 +201,10 @@ void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DAC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -233,9 +233,9 @@ void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DAC12_CLK_DISABLE();
-  
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
 
@@ -264,11 +264,11 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     __HAL_RCC_ETH1MAC_CLK_ENABLE();
     __HAL_RCC_ETH1TX_CLK_ENABLE();
     __HAL_RCC_ETH1RX_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ETH GPIO Configuration    
+    /**ETH GPIO Configuration
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
     PG11     ------> ETH_TX_EN
@@ -277,7 +277,7 @@ void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
     PC4     ------> ETH_RXD0
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
-    PA7     ------> ETH_CRS_DV 
+    PA7     ------> ETH_CRS_DV
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -324,8 +324,8 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     __HAL_RCC_ETH1MAC_CLK_DISABLE();
     __HAL_RCC_ETH1TX_CLK_DISABLE();
     __HAL_RCC_ETH1RX_CLK_DISABLE();
-  
-    /**ETH GPIO Configuration    
+
+    /**ETH GPIO Configuration
     PG14     ------> ETH_TXD1
     PG13     ------> ETH_TXD0
     PG11     ------> ETH_TX_EN
@@ -334,7 +334,7 @@ void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
     PC4     ------> ETH_RXD0
     PA2     ------> ETH_MDIO
     PC5     ------> ETH_RXD1
-    PA7     ------> ETH_CRS_DV 
+    PA7     ------> ETH_CRS_DV
     */
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11);
 
@@ -365,18 +365,18 @@ void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_QSPI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**QUADSPI GPIO Configuration    
+    /**QUADSPI GPIO Configuration
     PG6     ------> QUADSPI_BK1_NCS
     PF7     ------> QUADSPI_BK1_IO2
     PB2     ------> QUADSPI_CLK
     PD13     ------> QUADSPI_BK1_IO3
     PD12     ------> QUADSPI_BK1_IO1
-    PD11     ------> QUADSPI_BK1_IO0 
+    PD11     ------> QUADSPI_BK1_IO0
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -428,14 +428,14 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
   /* USER CODE END QUADSPI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_QSPI_CLK_DISABLE();
-  
-    /**QUADSPI GPIO Configuration    
+
+    /**QUADSPI GPIO Configuration
     PG6     ------> QUADSPI_BK1_NCS
     PF7     ------> QUADSPI_BK1_IO2
     PB2     ------> QUADSPI_CLK
     PD13     ------> QUADSPI_BK1_IO3
     PD12     ------> QUADSPI_BK1_IO1
-    PD11     ------> QUADSPI_BK1_IO0 
+    PD11     ------> QUADSPI_BK1_IO0
     */
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6);
 
@@ -512,11 +512,11 @@ void HAL_MMC_MspInit(MMC_HandleTypeDef* hmmc)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PB8     ------> SDMMC1_D4
     PC12     ------> SDMMC1_CK
     PB9     ------> SDMMC1_D5
@@ -526,7 +526,7 @@ void HAL_MMC_MspInit(MMC_HandleTypeDef* hmmc)
     PC9     ------> SDMMC1_D1
     PC8     ------> SDMMC1_D0
     PC7     ------> SDMMC1_D7
-    PC6     ------> SDMMC1_D6 
+    PC6     ------> SDMMC1_D6
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -535,7 +535,7 @@ void HAL_MMC_MspInit(MMC_HandleTypeDef* hmmc)
     GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
-    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8|GPIO_PIN_7|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -572,8 +572,8 @@ void HAL_MMC_MspDeInit(MMC_HandleTypeDef* hmmc)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PB8     ------> SDMMC1_D4
     PC12     ------> SDMMC1_CK
     PB9     ------> SDMMC1_D5
@@ -583,11 +583,11 @@ void HAL_MMC_MspDeInit(MMC_HandleTypeDef* hmmc)
     PC9     ------> SDMMC1_D1
     PC8     ------> SDMMC1_D0
     PC7     ------> SDMMC1_D7
-    PC6     ------> SDMMC1_D6 
+    PC6     ------> SDMMC1_D6
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
 
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8|GPIO_PIN_7|GPIO_PIN_6);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -615,10 +615,10 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM12_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_TIM12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM12 GPIO Configuration    
-    PB14     ------> TIM12_CH1 
+    /**TIM12 GPIO Configuration
+    PB14     ------> TIM12_CH1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -642,10 +642,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM12_MspPostInit 0 */
 
   /* USER CODE END TIM12_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
-    /**TIM12 GPIO Configuration    
-    PH9     ------> TIM12_CH2 
+    /**TIM12 GPIO Configuration
+    PH9     ------> TIM12_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -675,10 +675,10 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
   /* USER CODE END TIM12_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_TIM12_CLK_DISABLE();
-  
-    /**TIM12 GPIO Configuration    
+
+    /**TIM12 GPIO Configuration
     PH9     ------> TIM12_CH2
-    PB14     ------> TIM12_CH1 
+    PB14     ------> TIM12_CH1
     */
     HAL_GPIO_DeInit(GPIOH, GPIO_PIN_9);
 
@@ -707,15 +707,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PH13     ------> UART4_TX
-    PH14     ------> UART4_RX 
+    PH14     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
@@ -731,15 +731,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -766,10 +766,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PH13     ------> UART4_TX
-    PH14     ------> UART4_RX 
+    PH14     ------> UART4_RX
     */
     HAL_GPIO_DeInit(GPIOH, GPIO_PIN_13|GPIO_PIN_14);
 
@@ -784,10 +784,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA10     ------> USART1_RX
-    PA9     ------> USART1_TX 
+    PA9     ------> USART1_TX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_10|GPIO_PIN_9);
 
@@ -812,13 +812,13 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_HS_MspInit 0 */
 
   /* USER CODE END USB_OTG_HS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_HS GPIO Configuration    
+    /**USB_OTG_HS GPIO Configuration
     PB5     ------> USB_OTG_HS_ULPI_D7
     PI11     ------> USB_OTG_HS_ULPI_DIR
     PH4     ------> USB_OTG_HS_ULPI_NXT
@@ -830,9 +830,9 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
     PB1     ------> USB_OTG_HS_ULPI_D2
     PB0     ------> USB_OTG_HS_ULPI_D1
     PB10     ------> USB_OTG_HS_ULPI_D3
-    PB11     ------> USB_OTG_HS_ULPI_D4 
+    PB11     ------> USB_OTG_HS_ULPI_D4
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_1 
+    GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_1
                           |GPIO_PIN_0|GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -894,8 +894,8 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_HS_CLK_DISABLE();
     __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE();
-  
-    /**USB_OTG_HS GPIO Configuration    
+
+    /**USB_OTG_HS GPIO Configuration
     PB5     ------> USB_OTG_HS_ULPI_D7
     PI11     ------> USB_OTG_HS_ULPI_DIR
     PH4     ------> USB_OTG_HS_ULPI_NXT
@@ -907,9 +907,9 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
     PB1     ------> USB_OTG_HS_ULPI_D2
     PB0     ------> USB_OTG_HS_ULPI_D1
     PB10     ------> USB_OTG_HS_ULPI_D3
-    PB11     ------> USB_OTG_HS_ULPI_D4 
+    PB11     ------> USB_OTG_HS_ULPI_D4
     */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_1 
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_1
                           |GPIO_PIN_0|GPIO_PIN_10|GPIO_PIN_11);
 
     HAL_GPIO_DeInit(GPIOI, GPIO_PIN_11);
diff --git a/bsp/stm32/stm32h750-artpi-h750/.config b/bsp/stm32/stm32h750-artpi-h750/.config
index c31157512a..3125ac5607 100644
--- a/bsp/stm32/stm32h750-artpi-h750/.config
+++ b/bsp/stm32/stm32h750-artpi-h750/.config
@@ -21,6 +21,12 @@ CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 # CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 CONFIG_RT_DEBUG=y
 # CONFIG_RT_DEBUG_COLOR is not set
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -52,6 +58,7 @@ CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_NOHEAP is not set
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
 # CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
@@ -64,7 +71,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart4"
-CONFIG_RT_VER_NUM=0x40003
+CONFIG_RT_VER_NUM=0x40004
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -115,6 +122,8 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V2 is not set
 # CONFIG_RT_SERIAL_USING_DMA is not set
 CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
@@ -153,6 +162,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_LIBC is not set
 # CONFIG_RT_USING_PTHREADS is not set
 CONFIG_RT_LIBC_USING_TIME=y
+CONFIG_RT_LIBC_FIXED_TIMEZONE=8
 
 #
 # Network
@@ -189,9 +199,15 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_RT_LINK is not set
 # CONFIG_RT_USING_LWP is not set
 
 #
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
 # RT-Thread online packages
 #
 
@@ -258,8 +274,6 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_LIBRWS is not set
 # CONFIG_PKG_USING_TCPSERVER is not set
 # CONFIG_PKG_USING_PROTOBUF_C is not set
-# CONFIG_PKG_USING_ONNX_PARSER is not set
-# CONFIG_PKG_USING_ONNX_BACKEND is not set
 # CONFIG_PKG_USING_DLT645 is not set
 # CONFIG_PKG_USING_QXWZ is not set
 # CONFIG_PKG_USING_SMTP_CLIENT is not set
@@ -271,6 +285,12 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_NMEALIB is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
 
 #
 # security packages
@@ -296,6 +316,9 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_STEMWIN is not set
 # CONFIG_PKG_USING_WAVPLAYER is not set
 # CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
 
 #
 # tools packages
@@ -307,9 +330,12 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
 # CONFIG_PKG_USING_COREMARK is not set
 # CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
 # CONFIG_PKG_USING_NR_MICRO_SHELL is not set
 # CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
 # CONFIG_PKG_USING_LUNAR_CALENDAR is not set
@@ -317,6 +343,18 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_GPS_RMC is not set
 # CONFIG_PKG_USING_URLENCODE is not set
 # CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
 
 #
 # system packages
@@ -335,6 +373,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
 # CONFIG_PKG_USING_ROBOTS is not set
 # CONFIG_PKG_USING_EV is not set
@@ -344,7 +384,25 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_RAMDISK is not set
 # CONFIG_PKG_USING_MININI is not set
 # CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
 # CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
 
 #
 # peripheral libraries and drivers
@@ -353,6 +411,7 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -397,6 +456,28 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_AGILE_CONSOLE is not set
 # CONFIG_PKG_USING_LD3320 is not set
 # CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
 
 #
 # miscellaneous packages
@@ -406,6 +487,7 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
 # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
@@ -426,16 +508,72 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
-# CONFIG_PKG_USING_NNOM is not set
-# CONFIG_PKG_USING_LIBANN is not set
-# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_KI is not set
 # CONFIG_PKG_USING_ARMv7M_DWT is not set
 # CONFIG_PKG_USING_VT100 is not set
-# CONFIG_PKG_USING_ULAPACK is not set
 # CONFIG_PKG_USING_UKAL is not set
 # CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# games: games run on RT-Thread console
+#
 # CONFIG_PKG_USING_THREES is not set
 # CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
+
+#
+# Privated Packages of RealThread
+#
+# CONFIG_PKG_USING_CODEC is not set
+# CONFIG_PKG_USING_PLAYER is not set
+# CONFIG_PKG_USING_MPLAYER is not set
+# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+# CONFIG_PKG_USING_JS_PERSIMMON is not set
+# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
+
+#
+# Network Utilities
+#
+# CONFIG_PKG_USING_WICED is not set
+# CONFIG_PKG_USING_CLOUDSDK is not set
+# CONFIG_PKG_USING_POWER_MANAGER is not set
+# CONFIG_PKG_USING_RT_OTA is not set
+# CONFIG_PKG_USING_RTINSIGHT is not set
+# CONFIG_PKG_USING_SMARTCONFIG is not set
+# CONFIG_PKG_USING_RTX is not set
+# CONFIG_RT_USING_TESTCASE is not set
+# CONFIG_PKG_USING_NGHTTP2 is not set
+# CONFIG_PKG_USING_AVS is not set
+# CONFIG_PKG_USING_ALI_LINKKIT is not set
+# CONFIG_PKG_USING_STS is not set
+# CONFIG_PKG_USING_DLMS is not set
+# CONFIG_PKG_USING_AUDIO_FRAMEWORK is not set
+# CONFIG_PKG_USING_ZBAR is not set
+# CONFIG_PKG_USING_MCF is not set
+# CONFIG_PKG_USING_URPC is not set
+# CONFIG_PKG_USING_DCM is not set
+# CONFIG_PKG_USING_EMQ is not set
+# CONFIG_PKG_USING_CFGM is not set
+# CONFIG_PKG_USING_RT_CMSIS_DAP is not set
+# CONFIG_PKG_USING_SMODULE is not set
+# CONFIG_PKG_USING_SNFD is not set
+# CONFIG_PKG_USING_UDBD is not set
+# CONFIG_PKG_USING_BENCHMARK is not set
+# CONFIG_PKG_USING_UBJSON is not set
+# CONFIG_PKG_USING_DATATYPE is not set
+# CONFIG_PKG_USING_FASTFS is not set
+# CONFIG_PKG_USING_RIL is not set
+# CONFIG_PKG_USING_WATCH_DCM_SVC is not set
+# CONFIG_PKG_USING_WATCH_APP_FWK is not set
+# CONFIG_PKG_USING_GUI_TEST is not set
+# CONFIG_PKG_USING_PMEM is not set
+# CONFIG_PKG_USING_LWRDP is not set
+# CONFIG_PKG_USING_MASAN is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32H7=y
 
diff --git a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Inc/main.h b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Inc/main.h
index 4677beb2d9..b6b51e650c 100644
--- a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Inc/main.h
+++ b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Inc/main.h
@@ -51,7 +51,7 @@ extern "C" {
 /* USER CODE END EM */
 
 /* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
+
 
 /* USER CODE BEGIN EFP */
 
diff --git a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Src/stm32h7xx_hal_msp.c
index 77a19bb14b..cf63245b6f 100644
--- a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Src/stm32h7xx_hal_msp.c
+++ b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/Core/Src/stm32h7xx_hal_msp.c
@@ -101,14 +101,14 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -153,7 +153,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     /* USART3 interrupt Init */
     HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
     HAL_NVIC_EnableIRQ(USART3_IRQn);
-    
+
     NVIC_EnableIRQ(USART3_IRQn);
   /* USER CODE BEGIN USART3_MspInit 1 */
 
diff --git a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/CubeMX_Config.ioc
index a71fd18402..0c04bf4b43 100644
--- a/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32h750-artpi-h750/board/CubeMX_Config/CubeMX_Config.ioc
@@ -27,8 +27,8 @@ Mcu.PinsNb=11
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32H750XBHx
-MxCube.Version=6.0.1
-MxDb.Version=DB.6.0.0
+MxCube.Version=6.2.1
+MxDb.Version=DB.6.0.21
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.ForceEnableDMAVector=true
@@ -42,13 +42,17 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UART4_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.USART3_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA0.GPIOParameters=GPIO_PuPd
+PA0.GPIO_PuPd=GPIO_PULLUP
 PA0.Locked=true
 PA0.Mode=Asynchronous
 PA0.Signal=UART4_TX
-PB10.Locked=true
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
-PB11.Locked=true
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PD11.Mode=CTS_RTS
@@ -63,6 +67,8 @@ PI11.Locked=true
 PI11.Signal=GPIO_Output
 PI8.Locked=true
 PI8.Signal=GPIO_Output
+PI9.GPIOParameters=GPIO_PuPd
+PI9.GPIO_PuPd=GPIO_PULLUP
 PI9.Locked=true
 PI9.Mode=Asynchronous
 PI9.Signal=UART4_RX
@@ -77,7 +83,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32H750XBHx
-ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.8.0
+ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.9.0
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
diff --git a/bsp/stm32/stm32h750-artpi-h750/rtconfig.h b/bsp/stm32/stm32h750-artpi-h750/rtconfig.h
index 8d75171203..f6bda0feda 100644
--- a/bsp/stm32/stm32h750-artpi-h750/rtconfig.h
+++ b/bsp/stm32/stm32h750-artpi-h750/rtconfig.h
@@ -16,6 +16,9 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice optimization */
+
 #define RT_DEBUG
 
 /* Inter-Thread communication */
@@ -38,7 +41,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart4"
-#define RT_VER_NUM 0x40003
+#define RT_VER_NUM 0x40004
 #define ARCH_ARM
 #define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
@@ -78,6 +81,7 @@
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
+#define RT_USING_SERIAL_V1
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
@@ -87,6 +91,7 @@
 /* POSIX layer and C standard library */
 
 #define RT_LIBC_USING_TIME
+#define RT_LIBC_FIXED_TIMEZONE 8
 
 /* Network */
 
@@ -108,6 +113,9 @@
 /* Utilities */
 
 
+/* RT-Thread Utestcases */
+
+
 /* RT-Thread online packages */
 
 /* IoT - internet of things */
@@ -139,14 +147,29 @@
 /* system packages */
 
 
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
 /* peripheral libraries and drivers */
 
 
+/* AI packages */
+
+
 /* miscellaneous packages */
 
 
 /* samples: kernel and components samples */
 
+
+/* games: games run on RT-Thread console */
+
+
+/* Privated Packages of RealThread */
+
+
+/* Network Utilities */
+
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32H7
 
diff --git a/bsp/stm32/stm32h750-artpi-h750/rtconfig.py b/bsp/stm32/stm32h750-artpi-h750/rtconfig.py
index 2c9cbdd792..13a0ebbdb9 100644
--- a/bsp/stm32/stm32h750-artpi-h750/rtconfig.py
+++ b/bsp/stm32/stm32h750-artpi-h750/rtconfig.py
@@ -94,6 +94,40 @@ elif PLATFORM == 'armcc':
 
     POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
 
+elif PLATFORM == 'armclang':
+    # toolchains
+    CC = 'armclang'
+    CXX = 'armclang'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M7.fp.sp '
+    CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-M7 '
+    CFLAGS += ' -mcpu=cortex-M7 -mfpu=fpv4-sp-d16 '
+    CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar '
+    CFLAGS += ' -gdwarf-3 -ffunction-sections '
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers '
+    LFLAGS += ' --list rt-thread.map '
+    LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" '
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib'
+
+    EXEC_PATH += '/ARM/ARMCLANG/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O1' # armclang recommend
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+        
+    CXXFLAGS = CFLAGS
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
 elif PLATFORM == 'iar':
     # toolchains
     CC = 'iccarm'
diff --git a/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index fd1de238ea..1305e437aa 100644
--- a/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -27,8 +27,12 @@ NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c b/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
index 3570c90a39..8d69a8a2f7 100644
--- a/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
+++ b/bsp/stm32/stm32l010-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,15 +93,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF4_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -128,10 +128,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 73cbefbcd2..e31f64da5b 100644
--- a/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -24,14 +24,15 @@ Mcu.PinsNb=11
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L053R8Tx
-MxCube.Version=4.27.0
-MxDb.Version=DB.4.0.270
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.SysTick_IRQn=true\:0\:0\:true\:false\:true\:true
-NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true
+MxCube.Version=6.2.1
+MxDb.Version=DB.6.0.21
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:true\:false\:true\:true\:true
+NVIC.USART2_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 PA13.GPIOParameters=GPIO_Label
 PA13.GPIO_Label=TMS
 PA13.Locked=true
@@ -42,13 +43,15 @@ PA14.GPIO_Label=TCK
 PA14.Locked=true
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_SWCLK
-PA2.GPIOParameters=GPIO_Label
+PA2.GPIOParameters=GPIO_PuPd,GPIO_Label
 PA2.GPIO_Label=USART_TX
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Locked=true
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
-PA3.GPIOParameters=GPIO_Label
+PA3.GPIOParameters=GPIO_PuPd,GPIO_Label
 PA3.GPIO_Label=USART_RX
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Locked=true
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
@@ -67,14 +70,6 @@ PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Locked=true
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
 PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
-PCC.Checker=true
-PCC.Line=STM32L0x3
-PCC.MCU=STM32L053R(6-8)Tx
-PCC.PartNumber=STM32L053R8Tx
-PCC.Seq0=0
-PCC.Series=STM32L0
-PCC.Temperature=25
-PCC.Vdd=null
 PH0-OSC_IN.Locked=true
 PH0-OSC_IN.Mode=HSE-External-Oscillator
 PH0-OSC_IN.Signal=RCC_OSC_IN
@@ -91,7 +86,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32L053R8Tx
-ProjectManager.FirmwarePackage=STM32Cube FW_L0 V1.10.0
+ProjectManager.FirmwarePackage=STM32Cube FW_L0 V1.12.0
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -104,6 +99,7 @@ ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=CubeMX_Config.ioc
 ProjectManager.ProjectName=CubeMX_Config
+ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
diff --git a/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c b/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
index 8eb266519d..ac7c1552f4 100644
--- a/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
+++ b/bsp/stm32/stm32l053-st-nucleo/board/CubeMX_Config/Src/stm32l0xx_hal_msp.c
@@ -1,12 +1,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l0xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -78,14 +78,14 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF4_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -110,10 +110,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
 
diff --git a/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 4727ba50c3..355a13cc67 100644
--- a/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -54,14 +54,14 @@ PA14\ (JTCK/SWCLK).Mode=Serial_Wire
 PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
 PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label
 PA2.GPIO_Label=USART_TX
-PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 PA2.Locked=true
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
 PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label
 PA3.GPIO_Label=USART_RX
-PA3.GPIO_PuPd=GPIO_NOPULL
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 PA3.Locked=true
 PA3.Mode=Asynchronous
diff --git a/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 4e7628b29c..2361ae6c6a 100644
--- a/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l412-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,15 +93,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -128,10 +128,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
 
diff --git a/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/CubeMX_Config.ioc
index ce0175ce52..7600b27cb1 100644
--- a/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/CubeMX_Config.ioc
@@ -37,12 +37,14 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA10.Locked=true
-PA10.Mode=Asynchronous
-PA10.Signal=USART1_RX
-PA9.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
 PB13.Locked=true
 PB13.Mode=Simplex_Bidirectional_Master
 PB13.Signal=SPI2_SCK
diff --git a/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 943aadf254..44adfa4b3b 100644
--- a/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l431-BearPi/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,12 +93,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC3     ------> SPI2_MOSI
-    PB13     ------> SPI2_SCK 
+    PB13     ------> SPI2_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -136,10 +136,10 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC3     ------> SPI2_MOSI
-    PB13     ------> SPI2_SCK 
+    PB13     ------> SPI2_SCK
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
 
@@ -168,15 +168,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -203,10 +203,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
diff --git a/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 7304c402cd..844c31b868 100644
--- a/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -54,14 +54,16 @@ PA14\ (JTCK-SWCLK).GPIO_Label=SWCLK
 PA14\ (JTCK-SWCLK).Locked=true
 PA14\ (JTCK-SWCLK).Mode=Serial_Wire
 PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-PA15\ (JTDI).GPIOParameters=GPIO_Speed,GPIO_Label
+PA15\ (JTDI).GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label
 PA15\ (JTDI).GPIO_Label=VCP_RX
+PA15\ (JTDI).GPIO_PuPd=GPIO_PULLUP
 PA15\ (JTDI).GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
 PA15\ (JTDI).Locked=true
 PA15\ (JTDI).Mode=Asynchronous
 PA15\ (JTDI).Signal=USART2_RX
-PA2.GPIOParameters=GPIO_Speed,GPIO_Label
+PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label
 PA2.GPIO_Label=VCP_TX
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
 PA2.Locked=true
 PA2.Mode=Asynchronous
@@ -76,14 +78,6 @@ PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
 PC15-OSC32_OUT\ (PC15).Locked=true
 PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
 PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
-PCC.Checker=true
-PCC.Line=STM32L4x2
-PCC.MCU=STM32L432K(B-C)Ux
-PCC.PartNumber=STM32L432KCUx
-PCC.Seq0=0
-PCC.Series=STM32L4
-PCC.Temperature=25
-PCC.Vdd=null
 PinOutPanel.RotationAngle=0
 ProjectManager.AskForMigrate=true
 ProjectManager.BackupPrevious=false
diff --git a/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 78ee2bd1f2..e778c888fa 100644
--- a/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l432-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -1,38 +1,19 @@
+/* USER CODE BEGIN Header */
 /**
   ******************************************************************************
-  * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
-  *                      and de-Initialization codes.
+  * @file         stm32l4xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
   ******************************************************************************
-  ** This notice applies to any and all portions of this file
-  * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
-  * inserted by the user or by software development tools
-  * are owned by their respective copyright owners.
+  * @attention
   *
-  * COPYRIGHT(c) 2019 STMicroelectronics
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -122,21 +103,21 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA15 (JTDI)     ------> USART2_RX 
+    PA15 (JTDI)     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = VCP_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(VCP_TX_GPIO_Port, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = VCP_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
     GPIO_InitStruct.Alternate = GPIO_AF3_USART2;
     HAL_GPIO_Init(VCP_RX_GPIO_Port, &GPIO_InitStruct);
@@ -158,10 +139,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA15 (JTDI)     ------> USART2_RX 
+    PA15 (JTDI)     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, VCP_TX_Pin|VCP_RX_Pin);
 
diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 6dce14b8ae..c6ebbe94cb 100644
--- a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -57,7 +57,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
 PA1.Mode=Full_Duplex_Master
 PA1.Signal=SPI1_SCK
-PA10.Locked=true
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Full_Duplex_Master
@@ -75,9 +80,12 @@ PA14\ (JTCK-SWCLK).Locked=true
 PA14\ (JTCK-SWCLK).Mode=Serial_Wire
 PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
 PA2.Locked=true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
-PA3.Locked=true
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA4.GPIOParameters=GPIO_Label
@@ -100,9 +108,6 @@ PA7.GPIOParameters=GPIO_Label
 PA7.GPIO_Label=SMPS_SW [TS3A44159PWR_IN1_2]
 PA7.Locked=true
 PA7.Signal=GPIO_Output
-PA9.Locked=true
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB13.GPIOParameters=GPIO_Label
 PB13.GPIO_Label=LD4 [green Led]
 PB13.Locked=true
diff --git a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 1ce37c7e25..140de137cc 100644
--- a/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l433-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -181,12 +181,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA11     ------> SPI1_MISO
-    PA12     ------> SPI1_MOSI 
+    PA12     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -217,11 +217,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA11     ------> SPI1_MISO
-    PA12     ------> SPI1_MOSI 
+    PA12     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12);
 
@@ -292,15 +292,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -316,15 +316,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -351,10 +351,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -369,10 +369,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 0d6a6e0fcf..5ecfc94d87 100644
--- a/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -46,6 +46,12 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false
 PA1.Mode=Full_Duplex_Master
 PA1.Signal=SPI1_SCK
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA13\ (JTMS/SWDIO).GPIOParameters=GPIO_Label
@@ -61,7 +67,7 @@ PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
 PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA2.GPIO_Label=USART_TX
 PA2.GPIO_Mode=GPIO_MODE_AF_PP
-PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 PA2.Locked=true
 PA2.Mode=Asynchronous
@@ -69,7 +75,7 @@ PA2.Signal=USART2_TX
 PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
 PA3.GPIO_Label=USART_RX
 PA3.GPIO_Mode=GPIO_MODE_AF_PP
-PA3.GPIO_PuPd=GPIO_NOPULL
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 PA3.Locked=true
 PA3.Mode=Asynchronous
@@ -85,8 +91,6 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
 PB3\ (JTDO/TRACESWO).GPIOParameters=GPIO_Label
 PB3\ (JTDO/TRACESWO).GPIO_Label=SWO
 PB3\ (JTDO/TRACESWO).Locked=true
diff --git a/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 1d5d64d3b5..101aa6b6b1 100644
--- a/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l452-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,12 +93,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -129,11 +129,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA1     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -160,15 +160,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -184,15 +184,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -219,10 +219,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PA9     ------> USART1_TX
-    PA10     ------> USART1_RX 
+    PA10     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
 
@@ -237,10 +237,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
 
diff --git a/bsp/stm32/stm32l475-atk-pandora/.config b/bsp/stm32/stm32l475-atk-pandora/.config
index 18377e1e4e..e7dac17128 100644
--- a/bsp/stm32/stm32l475-atk-pandora/.config
+++ b/bsp/stm32/stm32l475-atk-pandora/.config
@@ -21,6 +21,12 @@ CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 # CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -52,6 +58,7 @@ CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_NOHEAP is not set
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
 # CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
@@ -64,7 +71,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40002
+CONFIG_RT_VER_NUM=0x40004
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -115,14 +122,17 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
+# CONFIG_RT_USING_SERIAL_V1 is not set
+CONFIG_RT_USING_SERIAL_V2=y
 CONFIG_RT_SERIAL_USING_DMA=y
-CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
@@ -135,7 +145,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
 # CONFIG_RT_USING_HWCRYPTO is not set
-# CONFIG_RT_USING_ENCODER is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
 # CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
@@ -150,7 +160,7 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_RT_USING_LIBC is not set
 # CONFIG_RT_USING_PTHREADS is not set
-CONFIG_RT_LIBC_USING_TIME=y
+# CONFIG_RT_LIBC_USING_TIME is not set
 
 #
 # Network
@@ -187,19 +197,30 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_RT_LINK is not set
 # CONFIG_RT_USING_LWP is not set
 
 #
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
 # RT-Thread online packages
 #
 
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
 # CONFIG_PKG_USING_WEBCLIENT is not set
 # CONFIG_PKG_USING_WEBNET is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
@@ -226,6 +247,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
 # CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
@@ -237,7 +260,10 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_GAGENT_CLOUD is not set
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
-# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
 # CONFIG_PKG_USING_IPMSG is not set
@@ -246,8 +272,23 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_LIBRWS is not set
 # CONFIG_PKG_USING_TCPSERVER is not set
 # CONFIG_PKG_USING_PROTOBUF_C is not set
-# CONFIG_PKG_USING_ONNX_PARSER is not set
-# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
 
 #
 # security packages
@@ -255,6 +296,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_libsodium is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
 
 #
 # language packages
@@ -270,6 +313,10 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_MUPDF is not set
 # CONFIG_PKG_USING_STEMWIN is not set
 # CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
 
 #
 # tools packages
@@ -281,7 +328,31 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
 
 #
 # system packages
@@ -293,14 +364,43 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
 # CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
 
 #
 # peripheral libraries and drivers
@@ -308,6 +408,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -316,10 +418,16 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_SX12XX is not set
 # CONFIG_PKG_USING_SIGNAL_LED is not set
 # CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
 # CONFIG_PKG_USING_AD7746 is not set
@@ -327,7 +435,47 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_I2C_TOOLS is not set
 # CONFIG_PKG_USING_NRF24L01 is not set
 # CONFIG_PKG_USING_TOUCH_DRIVERS is not set
-# CONFIG_PKG_USING_LCD_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
 
 #
 # miscellaneous packages
@@ -337,6 +485,7 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
 # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
@@ -345,6 +494,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 # CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
 
 #
 # samples: kernel and components samples
@@ -355,9 +506,72 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
-# CONFIG_PKG_USING_NNOM is not set
-# CONFIG_PKG_USING_LIBANN is not set
-# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# games: games run on RT-Thread console
+#
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
+
+#
+# Privated Packages of RealThread
+#
+# CONFIG_PKG_USING_CODEC is not set
+# CONFIG_PKG_USING_PLAYER is not set
+# CONFIG_PKG_USING_MPLAYER is not set
+# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+# CONFIG_PKG_USING_JS_PERSIMMON is not set
+# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
+
+#
+# Network Utilities
+#
+# CONFIG_PKG_USING_WICED is not set
+# CONFIG_PKG_USING_CLOUDSDK is not set
+# CONFIG_PKG_USING_POWER_MANAGER is not set
+# CONFIG_PKG_USING_RT_OTA is not set
+# CONFIG_PKG_USING_RTINSIGHT is not set
+# CONFIG_PKG_USING_SMARTCONFIG is not set
+# CONFIG_PKG_USING_RTX is not set
+# CONFIG_RT_USING_TESTCASE is not set
+# CONFIG_PKG_USING_NGHTTP2 is not set
+# CONFIG_PKG_USING_AVS is not set
+# CONFIG_PKG_USING_ALI_LINKKIT is not set
+# CONFIG_PKG_USING_STS is not set
+# CONFIG_PKG_USING_DLMS is not set
+# CONFIG_PKG_USING_AUDIO_FRAMEWORK is not set
+# CONFIG_PKG_USING_ZBAR is not set
+# CONFIG_PKG_USING_MCF is not set
+# CONFIG_PKG_USING_URPC is not set
+# CONFIG_PKG_USING_DCM is not set
+# CONFIG_PKG_USING_EMQ is not set
+# CONFIG_PKG_USING_CFGM is not set
+# CONFIG_PKG_USING_RT_CMSIS_DAP is not set
+# CONFIG_PKG_USING_SMODULE is not set
+# CONFIG_PKG_USING_SNFD is not set
+# CONFIG_PKG_USING_UDBD is not set
+# CONFIG_PKG_USING_BENCHMARK is not set
+# CONFIG_PKG_USING_UBJSON is not set
+# CONFIG_PKG_USING_DATATYPE is not set
+# CONFIG_PKG_USING_FASTFS is not set
+# CONFIG_PKG_USING_RIL is not set
+# CONFIG_PKG_USING_WATCH_DCM_SVC is not set
+# CONFIG_PKG_USING_WATCH_APP_FWK is not set
+# CONFIG_PKG_USING_GUI_TEST is not set
+# CONFIG_PKG_USING_PMEM is not set
+# CONFIG_PKG_USING_LWRDP is not set
+# CONFIG_PKG_USING_MASAN is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32L4=y
 
@@ -370,12 +584,15 @@ CONFIG_SOC_STM32L475VE=y
 # Onboard Peripheral Drivers
 #
 CONFIG_BSP_USING_STLINK_TO_USART=y
+# CONFIG_BSP_USING_KEY is not set
 # CONFIG_BSP_USING_QSPI_FLASH is not set
 # CONFIG_BSP_USING_SPI_LCD is not set
 # CONFIG_BSP_USING_SDCARD is not set
 # CONFIG_BSP_USING_ICM20608 is not set
 # CONFIG_BSP_USING_AHT10 is not set
 # CONFIG_BSP_USING_AUDIO is not set
+# CONFIG_BSP_USING_USB_AUDIO is not set
+# CONFIG_BSP_USING_WIFI is not set
 
 #
 # On-chip Peripheral Drivers
@@ -384,7 +601,14 @@ CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_UART1_RX_USING_DMA is not set
-# CONFIG_BSP_USING_UART2 is not set
+# CONFIG_BSP_UART1_TX_USING_DMA is not set
+CONFIG_BSP_UART1_RX_BUFSIZE=256
+CONFIG_BSP_UART1_TX_BUFSIZE=0
+CONFIG_BSP_USING_UART2=y
+CONFIG_BSP_UART2_RX_USING_DMA=y
+CONFIG_BSP_UART2_TX_USING_DMA=y
+CONFIG_BSP_UART2_RX_BUFSIZE=256
+CONFIG_BSP_UART2_TX_BUFSIZE=256
 # CONFIG_BSP_USING_ON_CHIP_FLASH is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_QSPI is not set
@@ -393,9 +617,11 @@ CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_USING_TIM is not set
 # CONFIG_BSP_USING_PWM is not set
 # CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_DAC is not set
 # CONFIG_BSP_USING_ONCHIP_RTC is not set
 # CONFIG_BSP_USING_WDT is not set
-# CONFIG_BSP_USING_USBD_FS is not set
+# CONFIG_BSP_USING_USBD is not set
+# CONFIG_BSP_USING_STM32_SDIO is not set
 # CONFIG_BSP_USING_CRC is not set
 # CONFIG_BSP_USING_RNG is not set
 # CONFIG_BSP_USING_UDID is not set
diff --git a/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc b/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc
index 3a59471b8a..e7711fa510 100644
--- a/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc
+++ b/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc
@@ -95,8 +95,8 @@ Mcu.PinsNb=56
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L475VETx
-MxCube.Version=6.0.1
-MxDb.Version=DB.6.0.0
+MxCube.Version=6.2.1
+MxDb.Version=DB.6.0.21
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.ForceEnableDMAVector=true
@@ -109,6 +109,8 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+PA10.GPIOParameters=GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
 PA10.Mode=Asynchronous
 PA10.Signal=USART1_RX
 PA11.Mode=Device_Only
@@ -119,8 +121,12 @@ PA13\ (JTMS-SWDIO).Mode=Serial_Wire
 PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
 PA14\ (JTCK-SWCLK).Mode=Serial_Wire
 PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA4.Signal=COMP_DAC11_group
@@ -130,6 +136,8 @@ PA6.Mode=Full_Duplex_Master
 PA6.Signal=SPI1_MISO
 PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
+PA9.GPIOParameters=GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
 PB10.Signal=S_TIM2_CH3
@@ -211,7 +219,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32L475VETx
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.16.0
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.17.0
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
diff --git a/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index a3f28f6117..77fb0eecc6 100644
--- a/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -869,7 +869,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -893,7 +893,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
diff --git a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
index bc71249fa0..e8a0713647 100644
--- a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
+++ b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
@@ -152,23 +152,59 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
-            config BSP_USING_UART1
-                bool "Enable UART1"
+            menuconfig BSP_USING_UART1
+                bool "Enable UART1 (Debugger)"
                 default y
+                if BSP_USING_UART1
+                    config BSP_UART1_RX_USING_DMA
+                        bool "Enable UART1 RX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
 
-            config BSP_UART1_RX_USING_DMA
-                bool "Enable UART1 RX DMA"
-                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
-                default n
+                    config BSP_UART1_TX_USING_DMA
+                        bool "Enable UART1 TX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_RX_BUFSIZE
+                        int "Set UART1 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART1_TX_BUFSIZE
+                        int "Set UART1 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_USING_UART2
+            menuconfig BSP_USING_UART2
                 bool "Enable UART2"
                 default n
+                if BSP_USING_UART2
+                    config BSP_UART2_RX_USING_DMA
+                        bool "Enable UART2 RX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
 
-            config BSP_UART2_RX_USING_DMA
-                bool "Enable UART2 RX DMA"
-                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n
+                    config BSP_UART2_TX_USING_DMA
+                        bool "Enable UART2 TX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_RX_BUFSIZE
+                        int "Set UART2 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART2_TX_BUFSIZE
+                        int "Set UART2 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+                endif
         endif
 
     config BSP_USING_ON_CHIP_FLASH
diff --git a/bsp/stm32/stm32l475-atk-pandora/board/ports/drv_lcd.c b/bsp/stm32/stm32l475-atk-pandora/board/ports/drv_lcd.c
index f80ca3a4b2..6ec90f880c 100644
--- a/bsp/stm32/stm32l475-atk-pandora/board/ports/drv_lcd.c
+++ b/bsp/stm32/stm32l475-atk-pandora/board/ports/drv_lcd.c
@@ -446,18 +446,33 @@ void lcd_draw_line(rt_uint16_t x1, rt_uint16_t y1, rt_uint16_t x2, rt_uint16_t y
     if (y1 == y2)
     {
         /* fast draw transverse line */
-        lcd_address_set(x1, y1, x2, y2);
+        rt_uint32_t x_offset = 0;
+        if (x1 < x2)
+        {
+            x_offset = x2 - x1;
+            lcd_address_set(x1, y1, x2, y2);
+        }
+        else if (x1 > x2)
+        {
+            x_offset = x1 - x2;
+            lcd_address_set(x2, y2, x1, y1);
+        }
+        else
+        {
+            lcd_draw_point(x1, y1);
+            return;
+        }
 
         rt_uint8_t line_buf[480] = {0};
 
-        for (i = 0; i < x2 - x1; i++)
+        for (i = 0; i < x_offset; i++)
         {
             line_buf[2 * i] = FORE_COLOR >> 8;
             line_buf[2 * i + 1] = FORE_COLOR;
         }
 
         rt_pin_write(LCD_DC_PIN, PIN_HIGH);
-        rt_spi_send(spi_dev_lcd, line_buf, (x2 - x1) * 2);
+        rt_spi_send(spi_dev_lcd, line_buf, x_offset * 2);
 
         return ;
     }
diff --git a/bsp/stm32/stm32l475-atk-pandora/project.uvprojx b/bsp/stm32/stm32l475-atk-pandora/project.uvprojx
index 1a187748bd..cdeaf7aa9f 100644
--- a/bsp/stm32/stm32l475-atk-pandora/project.uvprojx
+++ b/bsp/stm32/stm32l475-atk-pandora/project.uvprojx
@@ -1,7 +1,10 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
   <SchemaVersion>2.1</SchemaVersion>
+
   <Header>### uVision Project, (C) Keil Software</Header>
+
   <Targets>
     <Target>
       <TargetName>rt-thread</TargetName>
@@ -13,31 +16,31 @@
         <TargetCommonOption>
           <Device>STM32L475VETx</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32L4xx_DFP.2.0.0</PackID>
+          <PackID>Keil.STM32L4xx_DFP.2.2.0</PackID>
           <PackURL>http://www.keil.com/pack</PackURL>
           <Cpu>IRAM(0x20000000,0x00018000) IRAM2(0x10000000,0x00008000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
-          <FlashUtilSpec />
-          <StartupFile />
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
           <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_512 -FS08000000 -FL080000 -FP0($$Device:STM32L475VETx$CMSIS\Flash\STM32L4xx_512.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
           <RegisterFile>$$Device:STM32L475VETx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h</RegisterFile>
-          <MemoryEnv />
-          <Cmp />
-          <Asm />
-          <Linker />
-          <OHString />
-          <InfinionOptionDll />
-          <SLE66CMisc />
-          <SLE66AMisc />
-          <SLE66LinkerMisc />
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
           <SFDFile>$$Device:STM32L475VETx$CMSIS\SVD\STM32L4x5.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath />
-          <IncludePath />
-          <LibPath />
-          <RegisterFilePath />
-          <DBRegisterFilePath />
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -59,8 +62,8 @@
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -69,8 +72,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -80,14 +83,14 @@
             <RunUserProg1>1</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
             <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
-            <UserProg2Name />
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString />
+          <SVCSIdString></SVCSIdString>
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -101,8 +104,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument />
-          <IncludeLibraryModules />
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
           <ComprImg>1</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -136,10 +139,10 @@
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2CM3.DLL</Flash2>
           <Flash3>"" ()</Flash3>
-          <Flash4 />
-          <pFcarmOut />
-          <pFcarmGrp />
-          <pFcArmRoot />
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -172,7 +175,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName />
+            <RvctDeviceName></RvctDeviceName>
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -181,6 +184,7 @@
             <hadXRAM>0</hadXRAM>
             <uocXRam>0</uocXRam>
             <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
             <hadIRAM2>1</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -304,7 +308,7 @@
                 <Size>0x8000</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector />
+            <RvctStartVector></RvctStartVector>
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
@@ -331,10 +335,10 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls />
-              <Define>USE_HAL_DRIVER, __RTTHREAD__, STM32L475xx</Define>
-              <Undefine />
-              <IncludePath>.;applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
+              <MiscControls></MiscControls>
+              <Define>USE_HAL_DRIVER, __RTTHREAD__, STM32L475xx, __CLK_TCK=RT_TICK_PER_SECOND</Define>
+              <Undefine></Undefine>
+              <IncludePath>.;applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\none-gcc;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include;..\..\..\examples\utest\testcases\kernel</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -349,10 +353,10 @@
             <useXO>0</useXO>
             <uClangAs>0</uClangAs>
             <VariousControls>
-              <MiscControls />
-              <Define />
-              <Undefine />
-              <IncludePath />
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
             </VariousControls>
           </Aads>
           <LDads>
@@ -364,13 +368,13 @@
             <useFile>0</useFile>
             <TextAddressRange>0x08000000</TextAddressRange>
             <DataAddressRange>0x20000000</DataAddressRange>
-            <pXoBase />
+            <pXoBase></pXoBase>
             <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
-            <IncludeLibs />
-            <IncludeLibsPath />
-            <Misc />
-            <LinkerInputFile />
-            <DisabledWarnings />
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -389,33 +393,25 @@
           <GroupName>CPU</GroupName>
           <Files>
             <File>
-              <FileName>backtrace.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
               <FileName>div0.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>showmem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
-          </Files>
-          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
             <File>
               <FileName>cpuport.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>context_rvds.S</FileName>
               <FileType>2</FileType>
@@ -431,61 +427,45 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>serial.c</FileName>
+              <FileName>serial_v2.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
+              <FilePath>..\..\..\components\drivers\serial\serial_v2.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>completion.c</FileName>
+              <FileName>dataqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>dataqueue.c</FileName>
+              <FileName>workqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>pipe.c</FileName>
+              <FileName>ringbuffer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>ringblk_buf.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>ringbuffer.c</FileName>
+              <FileName>pipe.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>waitqueue.c</FileName>
+              <FileName>completion.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>workqueue.c</FileName>
+              <FileName>waitqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -493,40 +473,30 @@
           <GroupName>Drivers</GroupName>
           <Files>
             <File>
-              <FileName>board.c</FileName>
+              <FileName>stm32l4xx_hal_msp.c</FileName>
               <FileType>1</FileType>
-              <FilePath>board\board.c</FilePath>
+              <FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_msp.c</FileName>
+              <FileName>board.c</FileName>
               <FileType>1</FileType>
-              <FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath>
+              <FilePath>board\board.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>startup_stm32l475xx.s</FileName>
               <FileType>2</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l475xx.s</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>drv_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>drv_usart.c</FileName>
+              <FileName>drv_usart_v2.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart_v2.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>drv_common.c</FileName>
               <FileType>1</FileType>
@@ -542,15 +512,11 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\shell.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>cmd.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>msh.c</FileName>
               <FileType>1</FileType>
@@ -562,110 +528,69 @@
           <GroupName>Kernel</GroupName>
           <Files>
             <File>
-              <FileName>clock.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\src\clock.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>components.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\src\components.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>device.c</FileName>
+              <FileName>scheduler.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\device.c</FilePath>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>idle.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\idle.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>ipc.c</FileName>
+              <FileName>object.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\ipc.c</FilePath>
+              <FilePath>..\..\..\src\object.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>irq.c</FileName>
+              <FileName>components.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\irq.c</FilePath>
+              <FilePath>..\..\..\src\components.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>kservice.c</FileName>
+              <FileName>thread.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\kservice.c</FilePath>
+              <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>mem.c</FileName>
+              <FileName>mempool.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mem.c</FilePath>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>mempool.c</FileName>
+              <FileName>kservice.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mempool.c</FilePath>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>object.c</FileName>
+              <FileName>ipc.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\object.c</FilePath>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>scheduler.c</FileName>
+              <FileName>clock.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\scheduler.c</FilePath>
+              <FilePath>..\..\..\src\clock.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>signal.c</FileName>
+              <FileName>timer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\signal.c</FilePath>
+              <FilePath>..\..\..\src\timer.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>thread.c</FileName>
+              <FileName>mem.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\thread.c</FilePath>
+              <FilePath>..\..\..\src\mem.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>timer.c</FileName>
+              <FileName>device.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\timer.c</FilePath>
+              <FilePath>..\..\..\src\device.c</FilePath>
             </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>libc</GroupName>
-          <Files>
             <File>
-              <FileName>time.c</FileName>
+              <FileName>irq.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+              <FilePath>..\..\..\src\irq.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -673,158 +598,120 @@
           <GroupName>Libraries</GroupName>
           <Files>
             <File>
-              <FileName>system_stm32l4xx.c</FileName>
+              <FileName>stm32l4xx_hal_cryp.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal.c</FileName>
+              <FileName>stm32l4xx_hal_uart.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_comp.c</FileName>
+              <FileName>stm32l4xx_hal_usart.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32l4xx_hal_cortex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_crc.c</FileName>
+              <FileName>stm32l4xx_hal_gpio.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_crc_ex.c</FileName>
+              <FileName>stm32l4xx_hal_dma.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_cryp.c</FileName>
+              <FileName>stm32l4xx_hal_pwr.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_cryp_ex.c</FileName>
+              <FileName>stm32l4xx_hal_rcc_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_dma.c</FileName>
+              <FileName>stm32l4xx_hal_rcc.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32l4xx_hal_dma_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32l4xx_hal_exti.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_pwr.c</FileName>
+              <FileName>stm32l4xx_hal_crc.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_pwr_ex.c</FileName>
+              <FileName>stm32l4xx_hal.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_rcc.c</FileName>
+              <FileName>stm32l4xx_hal_usart_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_rcc_ex.c</FileName>
+              <FileName>stm32l4xx_hal_uart_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_rng.c</FileName>
+              <FileName>stm32l4xx_hal_crc_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_gpio.c</FileName>
+              <FileName>stm32l4xx_hal_comp.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_uart.c</FileName>
+              <FileName>stm32l4xx_hal_pwr_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_uart_ex.c</FileName>
+              <FileName>stm32l4xx_hal_rng.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_usart.c</FileName>
+              <FileName>system_stm32l4xx.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stm32l4xx_hal_usart_ex.c</FileName>
+              <FileName>stm32l4xx_hal_cryp_ex.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath>
             </File>
           </Files>
         </Group>
       </Groups>
     </Target>
   </Targets>
+
   <RTE>
-    <apis />
-    <components />
-    <files />
+    <apis/>
+    <components/>
+    <files/>
   </RTE>
+
 </Project>
diff --git a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
index e18e51ae82..5f3f8a812b 100644
--- a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
+++ b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
@@ -16,6 +16,9 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice optimization */
+
 #define RT_DEBUG
 #define RT_DEBUG_COLOR
 
@@ -39,7 +42,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-#define RT_VER_NUM 0x40002
+#define RT_VER_NUM 0x40004
 #define ARCH_ARM
 #define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
@@ -79,8 +82,8 @@
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
+#define RT_USING_SERIAL_V2
 #define RT_SERIAL_USING_DMA
-#define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
 /* Using USB */
@@ -88,7 +91,6 @@
 
 /* POSIX layer and C standard library */
 
-#define RT_LIBC_USING_TIME
 
 /* Network */
 
@@ -110,6 +112,9 @@
 /* Utilities */
 
 
+/* RT-Thread Utestcases */
+
+
 /* RT-Thread online packages */
 
 /* IoT - internet of things */
@@ -141,14 +146,29 @@
 /* system packages */
 
 
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
 /* peripheral libraries and drivers */
 
 
+/* AI packages */
+
+
 /* miscellaneous packages */
 
 
 /* samples: kernel and components samples */
 
+
+/* games: games run on RT-Thread console */
+
+
+/* Privated Packages of RealThread */
+
+
+/* Network Utilities */
+
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32L4
 
@@ -165,6 +185,13 @@
 #define BSP_USING_GPIO
 #define BSP_USING_UART
 #define BSP_USING_UART1
+#define BSP_UART1_RX_BUFSIZE 256
+#define BSP_UART1_TX_BUFSIZE 0
+#define BSP_USING_UART2
+#define BSP_UART2_RX_USING_DMA
+#define BSP_UART2_TX_USING_DMA
+#define BSP_UART2_RX_BUFSIZE 256
+#define BSP_UART2_TX_BUFSIZE 256
 
 /* Board extended module Drivers */
 
diff --git a/bsp/stm32/stm32l475-atk-pandora/rtconfig.py b/bsp/stm32/stm32l475-atk-pandora/rtconfig.py
index 9314a28375..4250a3d152 100644
--- a/bsp/stm32/stm32l475-atk-pandora/rtconfig.py
+++ b/bsp/stm32/stm32l475-atk-pandora/rtconfig.py
@@ -91,7 +91,6 @@ elif PLATFORM == 'armcc':
 
 
     CXXFLAGS = CFLAGS 
-    CFLAGS += ' -std=c99'
 
     POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
 
@@ -105,7 +104,7 @@ elif PLATFORM == 'armclang':
     TARGET_EXT = 'axf'
 
     DEVICE = ' --cpu Cortex-M4.fp '
-    CFLAGS = ' -xc -std=c99 --target=arm-arm-none-eabi -mcpu=cortex-m4 '
+    CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 '
     CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 '
     CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar '
     CFLAGS += ' -gdwarf-3 -ffunction-sections '
@@ -125,6 +124,7 @@ elif PLATFORM == 'armclang':
         CFLAGS += ' -O2'
         
     CXXFLAGS = CFLAGS
+    CFLAGS += ' -std=c99'
 
     POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
 
diff --git a/bsp/stm32/stm32l475-st-discovery/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l475-st-discovery/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index a7fa9c3e37..37ccf5eef2 100644
--- a/bsp/stm32/stm32l475-st-discovery/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l475-st-discovery/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -113,15 +113,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART1 GPIO Configuration    
+    /**USART1 GPIO Configuration
     PB6     ------> USART1_TX
-    PB7     ------> USART1_RX 
+    PB7     ------> USART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -148,10 +148,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART1_CLK_DISABLE();
-  
-    /**USART1 GPIO Configuration    
+
+    /**USART1 GPIO Configuration
     PB6     ------> USART1_TX
-    PB7     ------> USART1_RX 
+    PB7     ------> USART1_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
 
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 7d78ad4047..92fbb30a7d 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -222,7 +222,14 @@ Mcu.Pin11=PB10
 Mcu.Pin12=PB14
 RCC.PLLN=10
 Mcu.Pin10=PA7
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
 VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
 RCC.PWRFreq_Value=80000000
 RCC.I2C2Freq_Value=80000000
diff --git a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index dda464c29e..32c1642b53 100644
--- a/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -118,10 +118,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==1){
       __HAL_RCC_ADC_CLK_ENABLE();
     }
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
-    PC0     ------> ADC1_IN1 
+    /**ADC1 GPIO Configuration
+    PC0     ------> ADC1_IN1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_0;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
@@ -142,10 +142,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==1){
       __HAL_RCC_ADC_CLK_ENABLE();
     }
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC2 GPIO Configuration    
-    PC1     ------> ADC2_IN2 
+    /**ADC2 GPIO Configuration
+    PC1     ------> ADC2_IN2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
@@ -166,10 +166,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==1){
       __HAL_RCC_ADC_CLK_ENABLE();
     }
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC3 GPIO Configuration    
-    PC2     ------> ADC3_IN3 
+    /**ADC3 GPIO Configuration
+    PC2     ------> ADC3_IN3
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
@@ -201,9 +201,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==0){
       __HAL_RCC_ADC_CLK_DISABLE();
     }
-  
-    /**ADC1 GPIO Configuration    
-    PC0     ------> ADC1_IN1 
+
+    /**ADC1 GPIO Configuration
+    PC0     ------> ADC1_IN1
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
 
@@ -221,9 +221,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==0){
       __HAL_RCC_ADC_CLK_DISABLE();
     }
-  
-    /**ADC2 GPIO Configuration    
-    PC1     ------> ADC2_IN2 
+
+    /**ADC2 GPIO Configuration
+    PC1     ------> ADC2_IN2
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1);
 
@@ -241,9 +241,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
     if(HAL_RCC_ADC_CLK_ENABLED==0){
       __HAL_RCC_ADC_CLK_DISABLE();
     }
-  
-    /**ADC3 GPIO Configuration    
-    PC2     ------> ADC3_IN3 
+
+    /**ADC3 GPIO Configuration
+    PC2     ------> ADC3_IN3
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
 
@@ -358,12 +358,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -383,13 +383,13 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC3     ------> SPI2_MOSI
     PB10     ------> SPI2_SCK
-    PB14     ------> SPI2_MISO 
+    PB14     ------> SPI2_MISO
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -416,12 +416,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**SPI3 GPIO Configuration    
+    /**SPI3 GPIO Configuration
     PC10     ------> SPI3_SCK
     PC11     ------> SPI3_MISO
-    PC12     ------> SPI3_MOSI 
+    PC12     ------> SPI3_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -452,11 +452,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -471,11 +471,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC3     ------> SPI2_MOSI
     PB10     ------> SPI2_SCK
-    PB14     ------> SPI2_MISO 
+    PB14     ------> SPI2_MISO
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
 
@@ -492,11 +492,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI3_CLK_DISABLE();
-  
-    /**SPI3 GPIO Configuration    
+
+    /**SPI3 GPIO Configuration
     PC10     ------> SPI3_SCK
     PC11     ------> SPI3_MISO
-    PC12     ------> SPI3_MOSI 
+    PC12     ------> SPI3_MOSI
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
 
@@ -611,15 +611,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -646,10 +646,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
diff --git a/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/CubeMX_Config.ioc
index 851bf513a1..f74b8b254b 100644
--- a/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/CubeMX_Config.ioc
@@ -86,8 +86,12 @@ PA13\ (JTMS/SWDIO).Mode=Serial_Wire
 PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO
 PA14\ (JTCK/SWCLK).Mode=Serial_Wire
 PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
 PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
 PA5.Locked=true
@@ -101,11 +105,15 @@ PA9.Locked=true
 PA9.Mode=Full_Duplex_Master
 PA9.Signal=SPI2_SCK
 PB10.Locked=true
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=LPUART1_RX
 PB11.Locked=true
 PB11.Mode=Asynchronous
 PB11.Signal=LPUART1_TX
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PC1.Mode=Full_Duplex_Master
 PC1.Signal=SPI2_MOSI
 PC10.Mode=SD_4_bits_Wide_bus
diff --git a/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 1b769dd9c6..d3c1d9fa89 100644
--- a/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l496-ali-developer/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -78,7 +78,7 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -116,11 +116,11 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_ADC_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration    
+    /**ADC1 GPIO Configuration
     PC2     ------> ADC1_IN3
-    PC3     ------> ADC1_IN4 
+    PC3     ------> ADC1_IN4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
@@ -151,10 +151,10 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC_CLK_DISABLE();
-  
-    /**ADC1 GPIO Configuration    
+
+    /**ADC1 GPIO Configuration
     PC2     ------> ADC1_IN3
-    PC3     ------> ADC1_IN4 
+    PC3     ------> ADC1_IN4
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -182,15 +182,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LPUART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**LPUART1 GPIO Configuration    
+    /**LPUART1 GPIO Configuration
     PB10     ------> LPUART1_RX
-    PB11     ------> LPUART1_TX 
+    PB11     ------> LPUART1_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -206,15 +206,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration    
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -230,15 +230,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PC4     ------> USART3_TX
-    PC5     ------> USART3_RX 
+    PC5     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
@@ -267,10 +267,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LPUART1_CLK_DISABLE();
-  
-    /**LPUART1 GPIO Configuration    
+
+    /**LPUART1 GPIO Configuration
     PB10     ------> LPUART1_RX
-    PB11     ------> LPUART1_TX 
+    PB11     ------> LPUART1_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
 
@@ -285,10 +285,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART2_CLK_DISABLE();
-  
-    /**USART2 GPIO Configuration    
+
+    /**USART2 GPIO Configuration
     PA2     ------> USART2_TX
-    PA3     ------> USART2_RX 
+    PA3     ------> USART2_RX
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
 
@@ -303,10 +303,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PC4     ------> USART3_TX
-    PC5     ------> USART3_RX 
+    PC5     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
 
@@ -381,18 +381,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -431,16 +431,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -469,12 +469,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -494,14 +494,14 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SPI2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SPI2 GPIO Configuration    
+    /**SPI2 GPIO Configuration
     PC1     ------> SPI2_MOSI
     PA9     ------> SPI2_SCK
-    PD3     ------> SPI2_MISO 
+    PD3     ------> SPI2_MISO
     */
     GPIO_InitStruct.Pin = GPIO_PIN_1;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -548,11 +548,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI1_CLK_DISABLE();
-  
-    /**SPI1 GPIO Configuration    
+
+    /**SPI1 GPIO Configuration
     PA5     ------> SPI1_SCK
     PA6     ------> SPI1_MISO
-    PA7     ------> SPI1_MOSI 
+    PA7     ------> SPI1_MOSI
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
 
@@ -567,11 +567,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI2_CLK_DISABLE();
-  
-    /**SPI2 GPIO Configuration    
+
+    /**SPI2 GPIO Configuration
     PC1     ------> SPI2_MOSI
     PA9     ------> SPI2_SCK
-    PD3     ------> SPI2_MISO 
+    PD3     ------> SPI2_MISO
     */
     HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1);
 
@@ -663,12 +663,12 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM3_MspPostInit 0 */
 
   /* USER CODE END TIM3_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOE_CLK_ENABLE();
-    /**TIM3 GPIO Configuration    
+    /**TIM3 GPIO Configuration
     PE4     ------> TIM3_CH2
     PE5     ------> TIM3_CH3
-    PE6     ------> TIM3_CH4 
+    PE6     ------> TIM3_CH4
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
diff --git a/bsp/stm32/stm32l496-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l496-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index e93c9f5f34..2b5755574f 100644
--- a/bsp/stm32/stm32l496-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l496-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,16 +93,16 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LPUART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     HAL_PWREx_EnableVddIO2();
-    /**LPUART1 GPIO Configuration    
+    /**LPUART1 GPIO Configuration
     PG7     ------> LPUART1_TX
-    PG8     ------> LPUART1_RX 
+    PG8     ------> LPUART1_RX
     */
     GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
     HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
@@ -129,10 +129,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LPUART1_CLK_DISABLE();
-  
-    /**LPUART1 GPIO Configuration    
+
+    /**LPUART1 GPIO Configuration
     PG7     ------> LPUART1_TX
-    PG8     ------> LPUART1_RX 
+    PG8     ------> LPUART1_RX
     */
     HAL_GPIO_DeInit(GPIOG, STLK_RX_Pin|STLK_TX_Pin);
 
@@ -157,14 +157,14 @@ void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
 
   /* USER CODE END USB_OTG_FS_MspInit 0 */
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration    
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
     GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -214,15 +214,15 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
   /* USER CODE END USB_OTG_FS_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-  
-    /**USB_OTG_FS GPIO Configuration    
+
+    /**USB_OTG_FS GPIO Configuration
     PA8     ------> USB_OTG_FS_SOF
     PA9     ------> USB_OTG_FS_VBUS
     PA10     ------> USB_OTG_FS_ID
     PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP 
+    PA12     ------> USB_OTG_FS_DP
     */
-    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin 
+    HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin
                           |USB_DP_Pin);
 
     /* Disable VDDUSB */
diff --git a/bsp/stm32/stm32l4r5-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l4r5-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 7446f38eb7..8bb1c70fd9 100644
--- a/bsp/stm32/stm32l4r5-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l4r5-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -32,7 +32,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -93,12 +93,12 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_LPUART1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     HAL_PWREx_EnableVddIO2();
-    /**LPUART1 GPIO Configuration    
+    /**LPUART1 GPIO Configuration
     PG7     ------> LPUART1_TX
-    PG8     ------> LPUART1_RX 
+    PG8     ------> LPUART1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -118,15 +118,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
@@ -153,10 +153,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END LPUART1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_LPUART1_CLK_DISABLE();
-  
-    /**LPUART1 GPIO Configuration    
+
+    /**LPUART1 GPIO Configuration
     PG7     ------> LPUART1_TX
-    PG8     ------> LPUART1_RX 
+    PG8     ------> LPUART1_RX
     */
     HAL_GPIO_DeInit(GPIOG, GPIO_PIN_7|GPIO_PIN_8);
 
@@ -171,10 +171,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PD8     ------> USART3_TX
-    PD9     ------> USART3_RX 
+    PD9     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9);
 
diff --git a/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/CubeMX_Config.ioc
index 1ded20f423..b5a954c18e 100644
--- a/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/CubeMX_Config.ioc
@@ -101,10 +101,12 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
-PB10.Locked=true
+PB10.GPIOParameters=GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLUP
 PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
-PB11.Locked=true
+PB11.GPIOParameters=GPIO_PuPd
+PB11.GPIO_PuPd=GPIO_PULLUP
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
 PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
diff --git a/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c b/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
index 0cdb9babc3..457a8f7516 100644
--- a/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
+++ b/bsp/stm32/stm32l4r9-st-eval/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
@@ -2,12 +2,12 @@
 /**
   ******************************************************************************
   * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   ** This notice applies to any and all portions of this file
   * that are not between comment pairs USER CODE BEGIN and
-  * USER CODE END. Other portions of this file, whether 
+  * USER CODE END. Other portions of this file, whether
   * inserted by the user or by software development tools
   * are owned by their respective copyright owners.
   *
@@ -52,7 +52,7 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -302,15 +302,15 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB11     ------> USART3_RX
-    PB10     ------> USART3_TX 
+    PB10     ------> USART3_TX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -339,10 +339,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB11     ------> USART3_RX
-    PB10     ------> USART3_TX 
+    PB10     ------> USART3_TX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_11|GPIO_PIN_10);
 
@@ -366,8 +366,8 @@ static void HAL_FMC_MspInit(void){
   FMC_Initialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_ENABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   PD0   ------> FMC_D2
@@ -412,9 +412,9 @@ static void HAL_FMC_MspInit(void){
   PF12   ------> FMC_A6
   PE11   ------> FMC_D8
   */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3 
-                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15 
-                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
+                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
+                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
                           |GPIO_PIN_12|GPIO_PIN_11;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -422,9 +422,9 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5 
-                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14 
-                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
+                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
+                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -432,8 +432,8 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14 
+  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
                           |GPIO_PIN_13|GPIO_PIN_12;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -441,7 +441,7 @@ static void HAL_FMC_MspInit(void){
   GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
   HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
 
-  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1 
+  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
                           |GPIO_PIN_2|GPIO_PIN_0;
   GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -476,8 +476,8 @@ static void HAL_FMC_MspDeInit(void){
   FMC_DeInitialized = 1;
   /* Peripheral clock enable */
   __HAL_RCC_FMC_CLK_DISABLE();
-  
-  /** FMC GPIO Configuration  
+
+  /** FMC GPIO Configuration
   PE0   ------> FMC_NBL0
   PE1   ------> FMC_NBL1
   PD0   ------> FMC_D2
@@ -522,21 +522,21 @@ static void HAL_FMC_MspDeInit(void){
   PF12   ------> FMC_A6
   PE11   ------> FMC_D8
   */
-  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3 
-                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15 
-                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13 
+  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_3
+                          |GPIO_PIN_5|GPIO_PIN_10|GPIO_PIN_9|GPIO_PIN_15
+                          |GPIO_PIN_8|GPIO_PIN_14|GPIO_PIN_7|GPIO_PIN_13
                           |GPIO_PIN_12|GPIO_PIN_11);
 
-  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5 
-                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14 
-                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9 
+  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_4|GPIO_PIN_1|GPIO_PIN_5
+                          |GPIO_PIN_7|GPIO_PIN_13|GPIO_PIN_15|GPIO_PIN_14
+                          |GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
                           |GPIO_PIN_8);
 
-  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3 
-                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14 
+  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2|GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_3
+                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_15|GPIO_PIN_14
                           |GPIO_PIN_13|GPIO_PIN_12);
 
-  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1 
+  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_4|GPIO_PIN_3|GPIO_PIN_5|GPIO_PIN_1
                           |GPIO_PIN_2|GPIO_PIN_0);
 
   /* USER CODE BEGIN FMC_MspDeInit 1 */
diff --git a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index 5ca08fbbd0..940be95f73 100644
--- a/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32mp1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -33,7 +33,7 @@ DMA_HandleTypeDef hdma_cryp_out   = {0};
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -59,7 +59,7 @@ DMA_HandleTypeDef hdma_cryp_out   = {0};
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 /**
   * Initializes the Global MSP.
   */
@@ -74,7 +74,7 @@ void HAL_MspInit(void)
   /* System interrupt init*/
 
   /* USER CODE BEGIN MspInit 1 */
-    if (IS_ENGINEERING_BOOT_MODE()) 
+    if (IS_ENGINEERING_BOOT_MODE())
     {
         __HAL_RCC_SYSRAM_CLK_ENABLE();
     }
@@ -102,7 +102,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
     PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PER;
@@ -115,10 +115,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     /* Peripheral clock enable */
     __HAL_RCC_ADC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -145,9 +145,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC12_CLK_DISABLE();
-  
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_14);
 
@@ -174,10 +174,10 @@ void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DAC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -205,9 +205,9 @@ void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DAC12_CLK_DISABLE();
-  
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
 
@@ -287,7 +287,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
   /* USER CODE END LPTIM1_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
     PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSI;
@@ -315,7 +315,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -343,7 +343,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -371,7 +371,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -399,7 +399,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -520,7 +520,7 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SPI45;
     PeriphClkInit.Spi45ClockSelection = RCC_SPI45CLKSOURCE_PCLK2;
@@ -533,12 +533,12 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
 
     /* Peripheral clock enable */
     __HAL_RCC_SPI5_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**SPI5 GPIO Configuration    
+    /**SPI5 GPIO Configuration
     PF9     ------> SPI5_MOSI
     PF8     ------> SPI5_MISO
-    PF7     ------> SPI5_SCK 
+    PF7     ------> SPI5_SCK
     */
     GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_8|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -569,10 +569,10 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF9     ------> SPI5_MOSI
-    PF7     ------> SPI5_SCK 
+    PF7     ------> SPI5_SCK
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_9|GPIO_PIN_7);
 
@@ -646,10 +646,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM4_MspPostInit 0 */
 
   /* USER CODE END TIM4_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
-    PD13     ------> TIM4_CH2 
+    /**TIM4 GPIO Configuration
+    PD13     ------> TIM4_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -736,7 +736,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART24;
     PeriphClkInit.Uart24ClockSelection = RCC_UART24CLKSOURCE_HSI;
@@ -749,23 +749,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = STLINK_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF6_UART4;
     HAL_GPIO_Init(STLINK_RX_GPIO_Port, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = STLINK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(STLINK_TX_GPIO_Port, &GPIO_InitStruct);
 
@@ -781,7 +781,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART35;
     PeriphClkInit.Uart35ClockSelection = RCC_UART35CLKSOURCE_PCLK1;
@@ -794,22 +794,22 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
@@ -835,10 +835,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     HAL_GPIO_DeInit(STLINK_RX_GPIO_Port, STLINK_RX_Pin);
 
@@ -855,10 +855,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_12);
 
@@ -904,12 +904,12 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
     RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         if(IS_ENGINEERING_BOOT_MODE())
         {
-             /*** Configure the I2C peripheral clock ***/ 
+             /*** Configure the I2C peripheral clock ***/
             PeriphClkInit.I2c46ClockSelection = RCC_I2C46CLKSOURCE_HSI;
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C46;
             if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -931,11 +931,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 
         /* Enable I2C clock */
         __HAL_RCC_I2C4_CLK_ENABLE();
-        /* Force the I2C peripheral clock reset */  
+        /* Force the I2C peripheral clock reset */
         __HAL_RCC_I2C4_FORCE_RESET();
-        /* Release the I2C peripheral clock reset */  
+        /* Release the I2C peripheral clock reset */
         __HAL_RCC_I2C4_RELEASE_RESET();
-        
+
         HAL_NVIC_SetPriority(I2C4_ER_IRQn, 0, 1);
         HAL_NVIC_EnableIRQ(I2C4_ER_IRQn);
         HAL_NVIC_SetPriority(I2C4_EV_IRQn, 0, 2);
@@ -953,13 +953,13 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
 {
   GPIO_InitTypeDef GPIO_InitStruct = {0};
   RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-  
+
   if(hsd->Instance==SDMMC1)
   {
   /* USER CODE BEGIN SDMMC1_MspInit 0 */
     if (IS_ENGINEERING_BOOT_MODE())
     {
-        /** Initializes the peripherals clock 
+        /** Initializes the peripherals clock
         */
         PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
         PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
@@ -971,18 +971,18 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SDMMC1 GPIO Configuration    
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -995,7 +995,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
 
     __HAL_RCC_SDMMC1_FORCE_RESET();
     __HAL_RCC_SDMMC1_RELEASE_RESET();
-  
+
     /* SDMMC1 interrupt Init */
     HAL_NVIC_SetPriority(SDMMC1_IRQn, 2, 0);
     HAL_NVIC_EnableIRQ(SDMMC1_IRQn);
@@ -1008,7 +1008,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE BEGIN SDMMC2_MspInit 0 */
     if (IS_ENGINEERING_BOOT_MODE())
     {
-        /** Initializes the peripherals clock 
+        /** Initializes the peripherals clock
         */
         PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
         PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
@@ -1020,17 +1020,17 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC2_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_SDMMC2_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOG_CLK_ENABLE();
-    /**SDMMC2 GPIO Configuration    
+    /**SDMMC2 GPIO Configuration
     PB14     ------> SDMMC2_D0
     PB15     ------> SDMMC2_D1
     PB3     ------> SDMMC2_D2
     PB4     ------> SDMMC2_D3
     PE3     ------> SDMMC2_CK
-    PG6     ------> SDMMC2_CMD 
+    PG6     ------> SDMMC2_CMD
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_14|GPIO_PIN_15;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1055,7 +1055,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
 
     __HAL_RCC_SDMMC2_FORCE_RESET();
     __HAL_RCC_SDMMC2_RELEASE_RESET();
-  
+
     /* SDMMC2 interrupt Init */
     HAL_NVIC_SetPriority(SDMMC2_IRQn, 2, 0);
     HAL_NVIC_EnableIRQ(SDMMC2_IRQn);
@@ -1080,16 +1080,16 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PC8     ------> SDMMC1_D0
     PC9     ------> SDMMC1_D1
     PC10     ------> SDMMC1_D2
     PC11     ------> SDMMC1_D3
     PC12     ------> SDMMC1_CK
-    PD2     ------> SDMMC1_CMD 
+    PD2     ------> SDMMC1_CMD
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
@@ -1111,7 +1111,7 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
 void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         /* Configure I2C Tx, Rx as alternate function */
@@ -1187,7 +1187,7 @@ void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
   /* USER CODE END RNG2_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RNG2;
     PeriphClkInit.Rng2ClockSelection = RCC_RNG2CLKSOURCE_CSI;
@@ -1243,7 +1243,7 @@ void HAL_HASH_MspInit(HASH_HandleTypeDef* hhash)
     __HAL_RCC_HASH2_CLK_ENABLE();
   /* USER CODE BEGIN HASH2_MspInit 1 */
     __HAL_RCC_DMAMUX_CLK_ENABLE();
-    
+
     /* Peripheral DMA init*/
     hdma_hash_in.Instance = DMA2_Stream7;
     hdma_hash_in.Init.Request = DMA_REQUEST_HASH2_IN;
@@ -1386,7 +1386,7 @@ void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
   /* USER CODE BEGIN SDMMC1_MspInit 0 */
     if (IS_ENGINEERING_BOOT_MODE())
     {
-        /** Initializes the peripherals clock 
+        /** Initializes the peripherals clock
         */
         PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
         PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_RTC;
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index 20f6aa2d63..6e8d4b0ca2 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -2,7 +2,7 @@
 /**
   ******************************************************************************
   * File Name          : stm32mp1xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization 
+  * Description        : This file provides code for the MSP Initialization
   *                      and de-Initialization codes.
   ******************************************************************************
   * @attention
@@ -39,7 +39,7 @@ DMA_HandleTypeDef hdma_dfsdm1_flt1 = {0};
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN Define */
- 
+
 /* USER CODE END Define */
 
 /* Private macro -------------------------------------------------------------*/
@@ -65,7 +65,7 @@ DMA_HandleTypeDef hdma_dfsdm1_flt1 = {0};
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-                        
+
 void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
                     /**
   * Initializes the Global MSP.
@@ -85,7 +85,7 @@ void HAL_MspInit(void)
     {
         __HAL_RCC_SYSRAM_CLK_ENABLE();
     }
-  
+
     HAL_NVIC_SetPriority(RCC_WAKEUP_IRQn, 0, 0);
     HAL_NVIC_EnableIRQ(RCC_WAKEUP_IRQn);
     __HAL_RCC_ENABLE_IT(RCC_IT_WKUP);
@@ -109,7 +109,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
     PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PER;
@@ -122,10 +122,10 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
 
     /* Peripheral clock enable */
     __HAL_RCC_ADC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     GPIO_InitStruct.Pin = GPIO_PIN_14;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -152,9 +152,9 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
   /* USER CODE END ADC2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_ADC12_CLK_DISABLE();
-  
-    /**ADC2 GPIO Configuration    
-    PF14     ------> ADC2_INP6 
+
+    /**ADC2 GPIO Configuration
+    PF14     ------> ADC2_INP6
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_14);
 
@@ -181,10 +181,10 @@ void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DAC12_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     GPIO_InitStruct.Pin = GPIO_PIN_4;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -212,9 +212,9 @@ void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
   /* USER CODE END DAC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DAC12_CLK_DISABLE();
-  
-    /**DAC1 GPIO Configuration    
-    PA4     ------> DAC1_OUT1 
+
+    /**DAC1 GPIO Configuration
+    PA4     ------> DAC1_OUT1
     */
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
 
@@ -294,7 +294,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
   /* USER CODE END LPTIM1_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM1;
     PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_LSE;
@@ -322,7 +322,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -350,7 +350,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM23;
     PeriphClkInit.Lptim23ClockSelection = RCC_LPTIM23CLKSOURCE_PCLK3;
@@ -378,7 +378,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -406,7 +406,7 @@ void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPTIM45;
     PeriphClkInit.Lptim45ClockSelection = RCC_LPTIM45CLKSOURCE_PCLK3;
@@ -527,7 +527,7 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI1_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SPI1;
     PeriphClkInit.Spi1ClockSelection = RCC_SPI1CLKSOURCE_PLL4;
@@ -540,9 +540,9 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
 
     /* Peripheral clock enable */
     __HAL_RCC_SPI1_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOZ_CLK_ENABLE();
-    /**SPI1 GPIO Configuration    
+    /**SPI1 GPIO Configuration
     PZ2      ------> SPI1_MOSI
     PZ1      ------> SPI1_MISO
     PZ0      ------> SPI1_SCK
@@ -576,10 +576,10 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   /* USER CODE END SPI5_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SPI5_CLK_DISABLE();
-  
-    /**SPI5 GPIO Configuration    
+
+    /**SPI5 GPIO Configuration
     PF9     ------> SPI5_MOSI
-    PF7     ------> SPI5_SCK 
+    PF7     ------> SPI5_SCK
     */
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_9|GPIO_PIN_7);
 
@@ -653,10 +653,10 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
   /* USER CODE BEGIN TIM4_MspPostInit 0 */
 
   /* USER CODE END TIM4_MspPostInit 0 */
-  
+
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**TIM4 GPIO Configuration    
-    PD13     ------> TIM4_CH2 
+    /**TIM4 GPIO Configuration
+    PD13     ------> TIM4_CH2
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -743,7 +743,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART24;
     PeriphClkInit.Uart24ClockSelection = RCC_UART24CLKSOURCE_HSI;
@@ -756,23 +756,23 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_UART4_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOG_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**UART4 GPIO Configuration    
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     GPIO_InitStruct.Pin = STLINK_RX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF6_UART4;
     HAL_GPIO_Init(STLINK_RX_GPIO_Port, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = STLINK_TX_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
     HAL_GPIO_Init(STLINK_TX_GPIO_Port, &GPIO_InitStruct);
 
@@ -788,7 +788,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_UART35;
     PeriphClkInit.Uart35ClockSelection = RCC_UART35CLKSOURCE_PCLK1;
@@ -801,22 +801,22 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
     /* Peripheral clock enable */
     __HAL_RCC_USART3_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**USART3 GPIO Configuration    
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
     GPIO_InitStruct.Pin = GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Alternate = GPIO_AF8_USART3;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
@@ -842,10 +842,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END UART4_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_UART4_CLK_DISABLE();
-  
-    /**UART4 GPIO Configuration    
+
+    /**UART4 GPIO Configuration
     PG11     ------> UART4_TX
-    PB2     ------> UART4_RX 
+    PB2     ------> UART4_RX
     */
     HAL_GPIO_DeInit(STLINK_RX_GPIO_Port, STLINK_RX_Pin);
 
@@ -862,10 +862,10 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
   /* USER CODE END USART3_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_USART3_CLK_DISABLE();
-  
-    /**USART3 GPIO Configuration    
+
+    /**USART3 GPIO Configuration
     PB10     ------> USART3_TX
-    PB12     ------> USART3_RX 
+    PB12     ------> USART3_RX
     */
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_12);
 
@@ -911,12 +911,12 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
     RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         if(IS_ENGINEERING_BOOT_MODE())
         {
-             /*** Configure the I2C peripheral clock ***/ 
+             /*** Configure the I2C peripheral clock ***/
             PeriphClkInit.I2c46ClockSelection = RCC_I2C46CLKSOURCE_HSI;
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C46;
             if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -938,11 +938,11 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 
         /* Enable I2C clock */
         __HAL_RCC_I2C4_CLK_ENABLE();
-        /* Force the I2C peripheral clock reset */  
+        /* Force the I2C peripheral clock reset */
         __HAL_RCC_I2C4_FORCE_RESET();
-        /* Release the I2C peripheral clock reset */  
+        /* Release the I2C peripheral clock reset */
         __HAL_RCC_I2C4_RELEASE_RESET();
-        
+
         HAL_NVIC_SetPriority(I2C4_ER_IRQn, 0, 1);
         HAL_NVIC_EnableIRQ(I2C4_ER_IRQn);
         HAL_NVIC_SetPriority(I2C4_EV_IRQn, 0, 2);
@@ -958,7 +958,7 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef *hI2c)
 void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hI2c)
 {
     GPIO_InitTypeDef  GPIO_InitStruct = {0};
-    
+
     if(hI2c->Instance == I2C4)
     {
         /* Configure I2C Tx, Rx as alternate function */
@@ -990,7 +990,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
         /* USER CODE BEGIN SDMMC1_MspInit 0 */
         if (IS_ENGINEERING_BOOT_MODE())
         {
-            /** Initializes the peripherals clock 
+            /** Initializes the peripherals clock
             */
             PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
             PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
@@ -1018,7 +1018,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
         PC12    ------> SDMMC1_CK
         PD2     ------> SDMMC1_CMD
         PE4     ------> SDMMC1_CKIN
-        PF2     ------> SDMMC1_D0DIR 
+        PF2     ------> SDMMC1_D0DIR
         */
         GPIO_InitStruct.Pin = GPIO_PIN_9;
         GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1033,11 +1033,11 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
         GPIO_InitStruct.Pin = GPIO_PIN_7;
         GPIO_InitStruct.Alternate = GPIO_AF8_SDIO1;
         HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-            
+
         GPIO_InitStruct.Pin = GPIO_PIN_4;
         HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
-          
-        GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+
+        GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                              |GPIO_PIN_12;
         GPIO_InitStruct.Pull = GPIO_NOPULL;
         GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
@@ -1056,13 +1056,13 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
 
         /* USER CODE END SDMMC1_MspInit 1 */
     }
-    
+
     if(hsd->Instance==SDMMC2)
     {
         /* USER CODE BEGIN SDMMC2_MspInit 0 */
         if (IS_ENGINEERING_BOOT_MODE())
         {
-            /** Initializes the peripherals clock 
+            /** Initializes the peripherals clock
             */
             PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
             PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
@@ -1088,7 +1088,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
         PA8      ------> SDMMC2_D4
         PA9      ------> SDMMC2_D5
         PE5      ------> SDMMC2_D6
-        PD3      ------> SDMMC2_D7       
+        PD3      ------> SDMMC2_D7
         PE3      ------> SDMMC2_CK
         PG6      ------> SDMMC2_CMD
         */
@@ -1104,10 +1104,10 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
 
         GPIO_InitStruct.Pin = GPIO_PIN_3;
         HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-            
+
         GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
         HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
-          
+
         GPIO_InitStruct.Pin = GPIO_PIN_9;
         GPIO_InitStruct.Alternate = GPIO_AF10_SDIO2;
         HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -1143,8 +1143,8 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC1_CLK_DISABLE();
-  
-    /**SDMMC1 GPIO Configuration    
+
+    /**SDMMC1 GPIO Configuration
     PB9     ------> SDMMC1_CDIR
     PC7     ------> SDMMC1_D123DIR
     PC8     ------> SDMMC1_D0
@@ -1154,17 +1154,17 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
     PC12    ------> SDMMC1_CK
     PD2     ------> SDMMC1_CMD
     PE4     ------> SDMMC1_CKIN
-    PF2     ------> SDMMC1_D0DIR 
+    PF2     ------> SDMMC1_D0DIR
     */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11
                           |GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
 
     HAL_GPIO_DeInit(GPIOB, GPIO_PIN_9);
-    
+
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4);
-    
+
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2);
     /* SDMMC1 interrupt DeInit */
     HAL_NVIC_DisableIRQ(SDMMC1_IRQn);
@@ -1172,7 +1172,7 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
 
   /* USER CODE END SDMMC1_MspDeInit 1 */
   }
-  
+
   if(hsd->Instance==SDMMC2)
   {
   /* USER CODE BEGIN SDMMC2_MspDeInit 0 */
@@ -1180,8 +1180,8 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
   /* USER CODE END SDMMC2_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_SDMMC2_CLK_DISABLE();
-  
-    /**SDMMC2 GPIO Configuration    
+
+    /**SDMMC2 GPIO Configuration
         PB14     ------> SDMMC2_D0
         PB15     ------> SDMMC2_D1
         PB3      ------> SDMMC2_D2
@@ -1189,7 +1189,7 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
         PA8      ------> SDMMC2_D4
         PA9      ------> SDMMC2_D5
         PE5      ------> SDMMC2_D6
-        PD3      ------> SDMMC2_D7       
+        PD3      ------> SDMMC2_D7
         PE3      ------> SDMMC2_CK
         PG6      ------> SDMMC2_CMD
     */
@@ -1198,9 +1198,9 @@ void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
     HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8|GPIO_PIN_9);
 
     HAL_GPIO_DeInit(GPIOD, GPIO_PIN_3);
-    
+
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3|GPIO_PIN_5);
-    
+
     HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6);
     /* SDMMC2 interrupt DeInit */
     HAL_NVIC_DisableIRQ(SDMMC2_IRQn);
@@ -1221,7 +1221,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         /* Peripheral clock enable */
         if(IS_ENGINEERING_BOOT_MODE())
         {
-            /** Initializes the peripherals clock 
+            /** Initializes the peripherals clock
             */
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SAI2;
             PeriphClkInit.Sai2ClockSelection = RCC_SAI2CLKSOURCE_PLL3_Q;
@@ -1236,7 +1236,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         __HAL_RCC_GPIOF_CLK_ENABLE();
         __HAL_RCC_SAI2_CLK_ENABLE();
 
-        /**SAI2_A_Block_A GPIO Configuration    
+        /**SAI2_A_Block_A GPIO Configuration
         PE0     ------> SAI2_MCLK_A
         PI7     ------> SAI2_FS_A
         PI5     ------> SAI2_SCK_A
@@ -1269,7 +1269,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         hdma_sai2_a.Init.FIFOThreshold       = DMA_FIFO_THRESHOLD_FULL;
         hdma_sai2_a.Init.MemBurst            = DMA_MBURST_SINGLE;
         hdma_sai2_a.Init.PeriphBurst         = DMA_PBURST_SINGLE;
-        
+
         HAL_DMA_DeInit(&hdma_sai2_a);
         if (HAL_DMA_Init(&hdma_sai2_a) != HAL_OK)
         {
@@ -1277,17 +1277,17 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         }
         __HAL_LINKDMA(hsai,hdmatx,hdma_sai2_a);
         __HAL_DMA_ENABLE(&hdma_sai2_a);
-        
+
         HAL_NVIC_SetPriority(DMA1_Stream0_IRQn, 0x02, 0);
         HAL_NVIC_EnableIRQ(DMA1_Stream0_IRQn);
     }
-    
+
     if (hsai->Instance==SAI2_Block_B)
     {
           /* Peripheral clock enable */
         if (IS_ENGINEERING_BOOT_MODE())
         {
-            /** Initializes the peripherals clock 
+            /** Initializes the peripherals clock
             */
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SAI2;
             PeriphClkInit.Sai2ClockSelection = RCC_SAI2CLKSOURCE_PLL3_Q;
@@ -1299,8 +1299,8 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         }
         __HAL_RCC_GPIOF_CLK_ENABLE();
         __HAL_RCC_SAI2_CLK_ENABLE();
-                
-        /**SAI2_B_Block_B GPIO Configuration     
+
+        /**SAI2_B_Block_B GPIO Configuration
         PE12     ------> SAI2_MCLK_B
         PE13     ------> SAI2_FS_B
         PE14     ------> SAI2_SCK_B
@@ -1313,13 +1313,13 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
         GPIO_InitStruct.Alternate = GPIO_AF10_SAI2;
         HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
-        
+
         GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14;
         HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
-        
+
         __HAL_RCC_DMAMUX_CLK_ENABLE();
         __HAL_RCC_DMA1_CLK_ENABLE();
-        
+
         /* Peripheral DMA init*/
         hdma_sai2_b.Instance                 = DMA1_Stream1;
         hdma_sai2_b.Init.Request             = DMA_REQUEST_SAI2_B;
@@ -1334,7 +1334,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         hdma_sai2_b.Init.FIFOThreshold       = DMA_FIFO_THRESHOLD_FULL;
         hdma_sai2_b.Init.MemBurst            = DMA_MBURST_SINGLE;
         hdma_sai2_b.Init.PeriphBurst         = DMA_PBURST_SINGLE;
-		
+
         HAL_DMA_DeInit(&hdma_sai2_b);
         if (HAL_DMA_Init(&hdma_sai2_b) != HAL_OK)
         {
@@ -1343,7 +1343,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         __HAL_LINKDMA(hsai,hdmarx,hdma_sai2_b);
         __HAL_DMA_ENABLE(&hdma_sai2_b);
         HAL_NVIC_SetPriority(DMA1_Stream1_IRQn, 0x02, 0);
-        HAL_NVIC_EnableIRQ(DMA1_Stream1_IRQn); 
+        HAL_NVIC_EnableIRQ(DMA1_Stream1_IRQn);
     }
     /* SAI4 */
     if(hsai->Instance==SAI4_Block_A)
@@ -1351,7 +1351,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         /* Peripheral clock enable */
         if(IS_ENGINEERING_BOOT_MODE())
         {
-            /** Initializes the peripherals clock 
+            /** Initializes the peripherals clock
             */
             PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SAI4;
             PeriphClkInit.Sai4ClockSelection = RCC_SAI4CLKSOURCE_PLL3_Q;
@@ -1363,9 +1363,9 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         }
         __HAL_RCC_GPIOB_CLK_ENABLE();
         __HAL_RCC_SAI4_CLK_ENABLE();
-        
-        /**SAI4_A_Block_A GPIO Configuration    
-        PB5     ------> SAI4_SD_A 
+
+        /**SAI4_A_Block_A GPIO Configuration
+        PB5     ------> SAI4_SD_A
         */
         GPIO_InitStruct.Pin = GPIO_PIN_5;
         GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1377,7 +1377,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         /* Peripheral DMA init*/
         __HAL_RCC_DMAMUX_CLK_ENABLE();
         __HAL_RCC_DMA1_CLK_ENABLE();
-        
+
         hdma_sai4_a.Instance                 = DMA1_Stream2;
         hdma_sai4_a.Init.Request             = DMA_REQUEST_SAI4_A;
         hdma_sai4_a.Init.Direction           = DMA_MEMORY_TO_PERIPH;
@@ -1391,7 +1391,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         hdma_sai4_a.Init.FIFOThreshold       = DMA_FIFO_THRESHOLD_FULL;
         hdma_sai4_a.Init.MemBurst            = DMA_MBURST_SINGLE;
         hdma_sai4_a.Init.PeriphBurst         = DMA_PBURST_SINGLE;
-       
+
         HAL_DMA_DeInit(&hdma_sai4_a);
         if (HAL_DMA_Init(&hdma_sai4_a) != HAL_OK)
         {
@@ -1400,7 +1400,7 @@ void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai)
         __HAL_LINKDMA(hsai,hdmatx,hdma_sai4_a);
         __HAL_DMA_ENABLE(&hdma_sai4_a);
         HAL_NVIC_SetPriority(DMA1_Stream2_IRQn, 0x02, 0);
-        HAL_NVIC_EnableIRQ(DMA1_Stream2_IRQn); 
+        HAL_NVIC_EnableIRQ(DMA1_Stream2_IRQn);
     }
 }
 
@@ -1420,27 +1420,27 @@ void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
   /* USER CODE END DCMI_MspInit 0 */
     /* Peripheral clock enable */
     __HAL_RCC_DCMI_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOE_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
     __HAL_RCC_GPIOA_CLK_ENABLE();
-    
+
     /**DCMI GPIO Configuration
-    PH9     ------> DCMI_D0      
+    PH9     ------> DCMI_D0
     PH10    ------> DCMI_D1
     PH11    ------> DCMI_D2
     PH12    ------> DCMI_D3
     PH14    ------> DCMI_D4
-    PI4     ------> DCMI_D5  
-    PB8     ------> DCMI_D6  
-    PE6     ------> DCMI_D7      
+    PI4     ------> DCMI_D5
+    PB8     ------> DCMI_D6
+    PE6     ------> DCMI_D7
     PH8     ------> DCMI_HSYNC
     PB7     ------> DCMI_VSYNC
     PA6     ------> DCMI_PIXCLK
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_8 
+    GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_8
                           |GPIO_PIN_9|GPIO_PIN_12;
     GPIO_InitStruct.Mode = GPIO_MODE_AF;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
@@ -1470,10 +1470,10 @@ void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    
-    HAL_NVIC_SetPriority(DCMI_IRQn, 0x03, 0x00);        
-    HAL_NVIC_EnableIRQ(DCMI_IRQn);     
-    
+
+    HAL_NVIC_SetPriority(DCMI_IRQn, 0x03, 0x00);
+    HAL_NVIC_EnableIRQ(DCMI_IRQn);
+
   /* USER CODE BEGIN DCMI_MspInit 1 */
   /* USER CODE END DCMI_MspInit 1 */
   }
@@ -1495,8 +1495,8 @@ void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
   /* USER CODE END DCMI_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_DCMI_CLK_DISABLE();
-  
-    /**DCMI GPIO Configuration    
+
+    /**DCMI GPIO Configuration
     PH10     ------> DCMI_D1
     PH11     ------> DCMI_D2
     PH14     ------> DCMI_D4
@@ -1507,9 +1507,9 @@ void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
     PB7     ------> DCMI_VSYNC
     PI4     ------> DCMI_D5
     PA6     ------> DCMI_PIXCLK
-    PB8     ------> DCMI_D6 
+    PB8     ------> DCMI_D6
     */
-    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_8 
+    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_8
                           |GPIO_PIN_9|GPIO_PIN_12);
 
     HAL_GPIO_DeInit(GPIOE, GPIO_PIN_6);
@@ -1544,7 +1544,7 @@ void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef* hfdcan)
   /* USER CODE END FDCAN1_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_FDCAN;
     PeriphClkInit.FdcanClockSelection = RCC_FDCANCLKSOURCE_HSE;
@@ -1557,12 +1557,12 @@ void HAL_FDCAN_MspInit(FDCAN_HandleTypeDef* hfdcan)
 
     /* Peripheral clock enable */
     __HAL_RCC_FDCAN_CLK_ENABLE();
-  
+
     __HAL_RCC_GPIOH_CLK_ENABLE();
     __HAL_RCC_GPIOI_CLK_ENABLE();
-    /**FDCAN1 GPIO Configuration    
+    /**FDCAN1 GPIO Configuration
     PH13     ------> FDCAN1_TX
-    PI9     ------> FDCAN1_RX 
+    PI9     ------> FDCAN1_RX
     */
     GPIO_InitStruct.Pin = GPIO_PIN_13;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -1605,10 +1605,10 @@ void HAL_FDCAN_MspDeInit(FDCAN_HandleTypeDef* hfdcan)
   /* USER CODE END FDCAN1_MspDeInit 0 */
     /* Peripheral clock disable */
     __HAL_RCC_FDCAN_CLK_DISABLE();
-  
-    /**FDCAN1 GPIO Configuration    
+
+    /**FDCAN1 GPIO Configuration
     PH13     ------> FDCAN1_TX
-    PI9     ------> FDCAN1_RX 
+    PI9     ------> FDCAN1_RX
     */
     HAL_GPIO_DeInit(GPIOH, GPIO_PIN_13);
 
@@ -1655,7 +1655,7 @@ void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef* hspdifrx)
 
         __HAL_RCC_DMAMUX_CLK_ENABLE();
         __HAL_RCC_DMA1_CLK_ENABLE();
-            
+
         hdma_spdifrx_rx.Instance                  = DMA1_Stream7;
         hdma_spdifrx_rx.Init.Request              = DMA_REQUEST_SPDIF_RX_DT;
         hdma_spdifrx_rx.Init.Direction            = DMA_PERIPH_TO_MEMORY;
@@ -1668,8 +1668,8 @@ void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef* hspdifrx)
         hdma_spdifrx_rx.Init.FIFOMode             = DMA_FIFOMODE_ENABLE;
         hdma_spdifrx_rx.Init.FIFOThreshold        = DMA_FIFO_THRESHOLD_FULL;
         hdma_spdifrx_rx.Init.MemBurst             = DMA_MBURST_SINGLE;
-        hdma_spdifrx_rx.Init.PeriphBurst          = DMA_MBURST_SINGLE; 
-  
+        hdma_spdifrx_rx.Init.PeriphBurst          = DMA_MBURST_SINGLE;
+
         HAL_DMA_DeInit(&hdma_spdifrx_rx);
         if (HAL_DMA_Init(&hdma_spdifrx_rx) != HAL_OK)
         {
@@ -1677,7 +1677,7 @@ void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef* hspdifrx)
         }
 
         __HAL_LINKDMA(hspdifrx, hdmaDrRx, hdma_spdifrx_rx);
-        
+
         HAL_NVIC_SetPriority(DMA1_Stream7_IRQn, 0x02, 0);
         HAL_NVIC_EnableIRQ(DMA1_Stream7_IRQn);
     }
@@ -1713,10 +1713,10 @@ void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel)
     __HAL_RCC_GPIOC_CLK_ENABLE();
     __HAL_RCC_GPIOB_CLK_ENABLE();
     __HAL_RCC_GPIOF_CLK_ENABLE();
-    /**DFSDM1 GPIO Configuration    
+    /**DFSDM1 GPIO Configuration
     PC3     ------> DFSDM1_DATIN1
     PB13     ------> DFSDM1_CKOUT
-    PF13     ------> DFSDM1_DATIN3 
+    PF13     ------> DFSDM1_DATIN3
     */
     GPIO_InitStruct.Pin         = GPIO_PIN_13;
     GPIO_InitStruct.Mode        = GPIO_MODE_AF_PP;
@@ -1724,7 +1724,7 @@ void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel)
     GPIO_InitStruct.Speed       = GPIO_SPEED_FREQ_HIGH;
     GPIO_InitStruct.Alternate   = GPIO_AF3_DFSDM1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-    
+
     GPIO_InitStruct.Pin         = GPIO_PIN_3;
     GPIO_InitStruct.Alternate   = GPIO_AF3_DFSDM1;
     HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
@@ -1737,10 +1737,10 @@ void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel)
 void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
 {
     RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-    
+
     if(IS_ENGINEERING_BOOT_MODE())
     {
-        /** Initializes the peripherals clock 
+        /** Initializes the peripherals clock
         */
         PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_DFSDM1;
         if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -1748,12 +1748,12 @@ void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
           Error_Handler();
         }
     }
-      
+
     __HAL_RCC_DFSDM1_CLK_ENABLE();
       /* DMA controller clock enable */
     __HAL_RCC_DMAMUX_CLK_ENABLE();
     __HAL_RCC_DMA2_CLK_ENABLE();
-  
+
     if(hdfsdm_filter->Instance == DFSDM1_Filter0)
     {
         hdma_dfsdm1_flt0.Instance                   = DMA2_Stream2;
@@ -1777,7 +1777,7 @@ void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
         /* Several peripheral DMA handle pointers point to the same DMA handle.
          Be aware that there is only one channel to perform all the requested DMAs. */
         __HAL_LINKDMA(hdfsdm_filter,hdmaReg,hdma_dfsdm1_flt0);
-        
+
         HAL_NVIC_SetPriority(DMA2_Stream2_IRQn, 2, 0);
         HAL_NVIC_EnableIRQ(DMA2_Stream2_IRQn);
     }
@@ -1797,14 +1797,14 @@ void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
         hdma_dfsdm1_flt1.Init.FIFOThreshold         = DMA_FIFO_THRESHOLD_FULL;
         hdma_dfsdm1_flt1.Init.MemBurst              = DMA_MBURST_SINGLE;
         hdma_dfsdm1_flt1.Init.PeriphBurst           = DMA_PBURST_SINGLE;
-        
+
         if (HAL_DMA_Init(&hdma_dfsdm1_flt1) != HAL_OK)
         {
           Error_Handler();
         }
-        
+
         __HAL_LINKDMA(hdfsdm_filter,hdmaReg,hdma_dfsdm1_flt1);
-        
+
         HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 2, 0);
         HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn);
     }
@@ -1837,7 +1837,7 @@ void HAL_HASH_MspInit(HASH_HandleTypeDef* hhash)
     __HAL_RCC_HASH2_CLK_ENABLE();
   /* USER CODE BEGIN HASH2_MspInit 1 */
     __HAL_RCC_DMAMUX_CLK_ENABLE();
-    
+
     /* Peripheral DMA init*/
     hdma_hash_in.Instance = DMA2_Stream7;
     hdma_hash_in.Init.Request = DMA_REQUEST_HASH2_IN;
@@ -1946,7 +1946,7 @@ void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
   /* USER CODE END RNG2_MspInit 0 */
   if(IS_ENGINEERING_BOOT_MODE())
   {
-  /** Initializes the peripherals clock 
+  /** Initializes the peripherals clock
   */
     PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RNG2;
     PeriphClkInit.Rng2ClockSelection = RCC_RNG2CLKSOURCE_LSE;
diff --git a/bsp/stm32/stm32wb55-st-nucleo/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c b/bsp/stm32/stm32wb55-st-nucleo/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
index 208e05644a..3e44fb9be1 100644
--- a/bsp/stm32/stm32wb55-st-nucleo/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
+++ b/bsp/stm32/stm32wb55-st-nucleo/board/CubeMX_Config/Src/stm32wbxx_hal_msp.c
@@ -226,7 +226,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -250,7 +250,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
     HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
diff --git a/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
index 4810da4b1f..510a488e01 100644
--- a/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
+++ b/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
@@ -45,12 +45,14 @@ PA1.GPIOParameters=GPIO_Label
 PA1.GPIO_Label=BUT2
 PA1.Locked=true
 PA1.Signal=GPIO_Input
-PA2.Locked=true
+PA2.GPIOParameters=GPIO_PuPd
+PA2.GPIO_PuPd=GPIO_PULLUP
 PA2.Mode=Asynchronous
-PA2.Signal=LPUART1_TX
-PA3.Locked=true
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_PuPd
+PA3.GPIO_PuPd=GPIO_PULLUP
 PA3.Mode=Asynchronous
-PA3.Signal=LPUART1_RX
+PA3.Signal=USART2_RX
 PB11.GPIOParameters=GPIO_Label
 PB11.GPIO_Label=LED3
 PB11.Locked=true
diff --git a/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c b/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c
index 72350eda0d..798e9a7ee0 100644
--- a/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c
+++ b/bsp/stm32/stm32wl55-st-nucleo/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c
@@ -102,7 +102,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
     */
     GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_2;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
     GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
     HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);