diff options
| author | GW <[email protected]> | 2019-02-13 12:25:56 +0800 |
|---|---|---|
| committer | GW <[email protected]> | 2019-02-13 12:25:56 +0800 |
| commit | eddf2386b2c24349385f2896efe6eed4df9755bc (patch) | |
| tree | d026d14222b3ef0d026f1bcb329915922cf0f409 /bsp | |
| parent | 124d9d0cf401fe27732eec03099925f067b73896 (diff) | |
修改配置选项，添加条件编译
Diffstat (limited to 'bsp')
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/.config | 4 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/board/Kconfig | 87 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/board/board.c | 2 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/project.ewp | 4595 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/project.uvoptx | 818 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/project.uvprojx | 314 | ||||
| -rw-r--r-- | bsp/stm32/stm32l476-st-nucleo/rtconfig.h | 2 |
7 files changed, 2633 insertions, 3189 deletions
diff --git a/bsp/stm32/stm32l476-st-nucleo/.config b/bsp/stm32/stm32l476-st-nucleo/.config index f6fbb600a8..427cb9a3a7 100644 --- a/bsp/stm32/stm32l476-st-nucleo/.config +++ b/bsp/stm32/stm32l476-st-nucleo/.config @@ -344,9 +344,7 @@ CONFIG_BSP_USING_GPIO=y CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART2=y # CONFIG_BSP_UART2_RX_USING_DMA is not set -# CONFIG_BSP_USING_I2C1 is not set -# CONFIG_BSP_USING_I2C2 is not set -# CONFIG_BSP_USING_I2C3 is not set +# CONFIG_BSP_USING_I2C is not set # CONFIG_BSP_USING_ONCHIP_RTC is not set # diff --git a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig index a83caaaeae..3e5b0ed121 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32l476-st-nucleo/board/Kconfig @@ -30,67 +30,66 @@ menu "On-chip Peripheral Drivers" config BSP_USING_UART2 bool "Enable UART2" default n + config BSP_UART2_RX_USING_DMA bool "Enable UART2 RX DMA" depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA default n endif - menuconfig BSP_USING_I2C1 - bool "Enable I2C1 BUS (software simulation)" + menuconfig BSP_USING_I2C + bool "Enable I2C (software simulation)" default n select RT_USING_I2C select RT_USING_I2C_BITOPS select RT_USING_PIN - if BSP_USING_I2C1 - config BSP_I2C1_SCL_PIN - int "i2c1 scl pin number" - range 1 176 - default 22 - config BSP_I2C1_SDA_PIN - int "I2C1 sda pin number" - range 1 176 - default 23 - endif + if BSP_USING_I2C + config BSP_USING_I2C1 + bool "Enable I2C1 BUS (software simulation)" + default n + if BSP_USING_I2C1 + config BSP_I2C1_SCL_PIN + int "i2c1 scl pin number" + range 1 176 + default 22 + config BSP_I2C1_SDA_PIN + int "I2C1 sda pin number" + range 1 176 + default 23 + endif - menuconfig BSP_USING_I2C2 - bool "Enable I2C2 BUS (software simulation)" - default n - select RT_USING_I2C - select RT_USING_I2C_BITOPS - select RT_USING_PIN - if BSP_USING_I2C2 - config BSP_I2C2_SCL_PIN - int "i2c2 scl pin number" - range 1 176 - default 26 - config BSP_I2C2_SDA_PIN - int "I2C2 sda pin number" - range 1 176 - default 27 - endif + config BSP_USING_I2C2 + bool "Enable I2C2 BUS (software simulation)" + default n + if BSP_USING_I2C2 + config BSP_I2C2_SCL_PIN + int "i2c2 scl pin number" + range 1 176 + default 26 + config BSP_I2C2_SDA_PIN + int "I2C2 sda pin number" + range 1 176 + default 27 + endif - menuconfig BSP_USING_I2C3 - bool "Enable I2C3 BUS (software simulation)" - default n - select RT_USING_I2CS - select RT_USING_I2C_BITOPS - select RT_USING_PIN - if BSP_USING_I2C3 - config BSP_I2C3_SCL_PIN - int "i2c3 scl pin number" - range 1 176 - default 32 - config BSP_I2C3_SDA_PIN - int "I2C3 sda pin number" - range 1 176 - default 33 + config BSP_USING_I2C3 + bool "Enable I2C3 BUS (software simulation)" + default n + if BSP_USING_I2C3 + config BSP_I2C3_SCL_PIN + int "i2c3 scl pin number" + range 1 176 + default 32 + config BSP_I2C3_SDA_PIN + int "I2C3 sda pin number" + range 1 176 + default 33 + endif endif config BSP_USING_ONCHIP_RTC bool "Enable RTC" select RT_USING_RTC - select RT_USING_LIBC default n endmenu diff --git a/bsp/stm32/stm32l476-st-nucleo/board/board.c b/bsp/stm32/stm32l476-st-nucleo/board/board.c index 8b59af60ce..b4fcfe0a84 100644 --- a/bsp/stm32/stm32l476-st-nucleo/board/board.c +++ b/bsp/stm32/stm32l476-st-nucleo/board/board.c @@ -16,10 +16,12 @@ void SystemClock_Config(void) RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; +#ifdef BSP_USING_ONCHIP_RTC /**Configure LSE Drive Capability */ HAL_PWR_EnableBkUpAccess(); __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); +#endif /**Initializes the CPU, AHB and APB busses clocks */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; diff --git a/bsp/stm32/stm32l476-st-nucleo/project.ewp b/bsp/stm32/stm32l476-st-nucleo/project.ewp index ec07d1e9da..c87b2d2d7d 100644 --- a/bsp/stm32/stm32l476-st-nucleo/project.ewp +++ b/bsp/stm32/stm32l476-st-nucleo/project.ewp @@ -1,2275 +1,2328 @@ -<?xml version="1.0" encoding="UTF-8"?>
<project>
- <fileVersion>3</fileVersion>
- <configuration>
- <name>rt-thread</name>
- <toolchain>
- <name>ARM</name>
- </toolchain>
+ <fileVersion>3</fileVersion>
+ <configuration>
+ <name>rt-thread</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>29</version>
+ <wantNonLocal>1</wantNonLocal>
<debug>1</debug>
- <settings>
- <name>General</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <version>29</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>ExePath</name>
- <state>build\iar\Exe</state>
- </option>
- <option>
- <name>ObjPath</name>
- <state>build\iar\Obj</state>
- </option>
- <option>
- <name>ListPath</name>
- <state>build\iar\List</state>
- </option>
- <option>
- <name>GEndianMode</name>
- <state>0</state>
- </option>
- <option>
- <name>Input description</name>
- <state>Automatic choice of formatter, without multibyte support.</state>
- </option>
- <option>
- <name>Output description</name>
- <state>Automatic choice of formatter, without multibyte support.</state>
- </option>
- <option>
- <name>GOutputBinary</name>
- <state>0</state>
- </option>
- <option>
- <name>OGCoreOrChip</name>
- <state>1</state>
- </option>
- <option>
- <name>GRuntimeLibSelect</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>GRuntimeLibSelectSlave</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>RTDescription</name>
- <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
- </option>
- <option>
- <name>OGProductVersion</name>
- <state>6.30.6.53380</state>
- </option>
- <option>
- <name>OGLastSavedByProductVersion</name>
- <state>8.11.2.13604</state>
- </option>
- <option>
- <name>GeneralEnableMisra</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraVerbose</name>
- <state>0</state>
- </option>
- <option>
- <name>OGChipSelectEditMenu</name>
- <state>STM32L475VE ST STM32L475VE</state>
- </option>
- <option>
- <name>GenLowLevelInterface</name>
- <state>1</state>
- </option>
- <option>
- <name>GEndianModeBE</name>
- <state>1</state>
- </option>
- <option>
- <name>OGBufferedTerminalOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>GenStdoutInterface</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraRules98</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>GeneralMisraVer</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraRules04</name>
- <version>0</version>
- <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
- </option>
- <option>
- <name>RTConfigPath2</name>
- <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
- </option>
- <option>
- <name>GBECoreSlave</name>
- <version>25</version>
- <state>39</state>
- </option>
- <option>
- <name>OGUseCmsis</name>
- <state>0</state>
- </option>
- <option>
- <name>OGUseCmsisDspLib</name>
- <state>0</state>
- </option>
- <option>
- <name>GRuntimeLibThreads</name>
- <state>0</state>
- </option>
- <option>
- <name>CoreVariant</name>
- <version>25</version>
- <state>39</state>
- </option>
- <option>
- <name>GFPUDeviceSlave</name>
- <state>STM32L475VE ST STM32L475VE</state>
- </option>
- <option>
- <name>FPU2</name>
- <version>0</version>
- <state>4</state>
- </option>
- <option>
- <name>NrRegs</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>NEON</name>
- <state>0</state>
- </option>
- <option>
- <name>GFPUCoreSlave2</name>
- <version>25</version>
- <state>39</state>
- </option>
- <option>
- <name>OGCMSISPackSelectDevice</name>
- </option>
- <option>
- <name>OgLibHeap</name>
- <state>0</state>
- </option>
- <option>
- <name>OGLibAdditionalLocale</name>
- <state>0</state>
- </option>
- <option>
- <name>OGPrintfVariant</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>OGPrintfMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>OGScanfVariant</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>OGScanfMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>GenLocaleTags</name>
- <state></state>
- </option>
- <option>
- <name>GenLocaleDisplayOnly</name>
- <state></state>
- </option>
- <option>
- <name>DSPExtension</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>ICCARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>34</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>CCOptimizationNoSizeConstraints</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDefines</name>
- <state>STM32L476xx</state>
- <state>USE_HAL_DRIVER</state>
- </option>
- <option>
- <name>CCPreprocFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocComments</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocLine</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMnemonics</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMessages</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssSource</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagSuppress</name>
- <state>Pa050</state>
- </option>
- <option>
- <name>CCDiagRemark</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagWarning</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagError</name>
- <state></state>
- </option>
- <option>
- <name>CCObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>CCAllowList</name>
- <version>1</version>
- <state>00000000</state>
- </option>
- <option>
- <name>CCDebugInfo</name>
- <state>1</state>
- </option>
- <option>
- <name>IEndianMode</name>
- <state>1</state>
- </option>
- <option>
- <name>IProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>IExtraOptionsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>IExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>CCLangConformance</name>
- <state>0</state>
- </option>
- <option>
- <name>CCSignedPlainChar</name>
- <state>1</state>
- </option>
- <option>
- <name>CCRequirePrototypes</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagWarnAreErr</name>
- <state>0</state>
- </option>
- <option>
- <name>CCCompilerRuntimeInfo</name>
- <state>0</state>
- </option>
- <option>
- <name>IFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>OutputFile</name>
- <state>$FILE_BNAME$.o</state>
- </option>
- <option>
- <name>CCLibConfigHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>PreInclude</name>
- <state></state>
- </option>
- <option>
- <name>CompilerMisraOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>CCIncludePath2</name>
- <state>$PROJ_DIR$\..\..\..\components\finsh</state>
- <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
- <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
- <state>$PROJ_DIR$\board\ports</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
- <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
- <state>$PROJ_DIR$\.</state>
- <state>$PROJ_DIR$\applications</state>
- <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
- <state>$PROJ_DIR$\board</state>
- <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
- <state>$PROJ_DIR$\..\..\..\include</state>
- <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
- </option>
- <option>
- <name>CCStdIncCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CCCodeSection</name>
- <state>.text</state>
- </option>
- <option>
- <name>IProcessorMode2</name>
- <state>1</state>
- </option>
- <option>
- <name>CCOptLevel</name>
- <state>1</state>
- </option>
- <option>
- <name>CCOptStrategy</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CCOptLevelSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>CompilerMisraRules98</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>CompilerMisraRules04</name>
- <version>0</version>
- <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
- </option>
- <option>
- <name>CCPosIndRopi</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPosIndRwpi</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPosIndNoDynInit</name>
- <state>0</state>
- </option>
- <option>
- <name>IccLang</name>
- <state>0</state>
- </option>
- <option>
- <name>IccCDialect</name>
- <state>1</state>
- </option>
- <option>
- <name>IccAllowVLA</name>
- <state>0</state>
- </option>
- <option>
- <name>IccStaticDestr</name>
- <state>1</state>
- </option>
- <option>
- <name>IccCppInlineSemantics</name>
- <state>0</state>
- </option>
- <option>
- <name>IccCmsis</name>
- <state>1</state>
- </option>
- <option>
- <name>IccFloatSemantics</name>
- <state>0</state>
- </option>
- <option>
- <name>CCNoLiteralPool</name>
- <state>0</state>
- </option>
- <option>
- <name>CCOptStrategySlave</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CCGuardCalls</name>
- <state>1</state>
- </option>
- <option>
- <name>CCEncSource</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEncOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEncOutputBom</name>
- <state>1</state>
- </option>
- <option>
- <name>CCEncInput</name>
- <state>0</state>
- </option>
- <option>
- <name>IccExceptions2</name>
- <state>0</state>
- </option>
- <option>
- <name>IccRTTI2</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>AARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>10</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>AObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>AEndian</name>
- <state>1</state>
- </option>
- <option>
- <name>ACaseSensitivity</name>
- <state>1</state>
- </option>
- <option>
- <name>MacroChars</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>AWarnEnable</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnWhat</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnOne</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange1</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange2</name>
- <state></state>
- </option>
- <option>
- <name>ADebug</name>
- <state>1</state>
- </option>
- <option>
- <name>AltRegisterNames</name>
- <state>0</state>
- </option>
- <option>
- <name>ADefines</name>
- <state></state>
- </option>
- <option>
- <name>AList</name>
- <state>0</state>
- </option>
- <option>
- <name>AListHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>AListing</name>
- <state>1</state>
- </option>
- <option>
- <name>Includes</name>
- <state>0</state>
- </option>
- <option>
- <name>MacDefs</name>
- <state>0</state>
- </option>
- <option>
- <name>MacExps</name>
- <state>1</state>
- </option>
- <option>
- <name>MacExec</name>
- <state>0</state>
- </option>
- <option>
- <name>OnlyAssed</name>
- <state>0</state>
- </option>
- <option>
- <name>MultiLine</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLengthCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLength</name>
- <state>80</state>
- </option>
- <option>
- <name>TabSpacing</name>
- <state>8</state>
- </option>
- <option>
- <name>AXRef</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDefines</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefInternal</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDual</name>
- <state>0</state>
- </option>
- <option>
- <name>AProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AOutputFile</name>
- <state>$FILE_BNAME$.o</state>
- </option>
- <option>
- <name>ALimitErrorsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>ALimitErrorsEdit</name>
- <state>100</state>
- </option>
- <option>
- <name>AIgnoreStdInclude</name>
- <state>0</state>
- </option>
- <option>
- <name>AUserIncludes</name>
- <state></state>
- </option>
- <option>
- <name>AExtraOptionsCheckV2</name>
- <state>0</state>
- </option>
- <option>
- <name>AExtraOptionsV2</name>
- <state></state>
- </option>
- <option>
- <name>AsmNoLiteralPool</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>OBJCOPY</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>OOCOutputFormat</name>
- <version>3</version>
- <state>3</state>
- </option>
- <option>
- <name>OCOutputOverride</name>
- <state>1</state>
- </option>
- <option>
- <name>OOCOutputFile</name>
- <state>../../../rtthread.bin</state>
- </option>
- <option>
- <name>OOCCommandLineProducer</name>
- <state>1</state>
- </option>
- <option>
- <name>OOCObjCopyEnable</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>CUSTOM</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <extensions></extensions>
- <cmdline></cmdline>
- <hasPrio>0</hasPrio>
- </data>
- </settings>
- <settings>
- <name>BICOMP</name>
- <archiveVersion>0</archiveVersion>
- <data />
- </settings>
- <settings>
- <name>BUILDACTION</name>
- <archiveVersion>1</archiveVersion>
- <data>
- <prebuild></prebuild>
- <postbuild></postbuild>
- </data>
- </settings>
- <settings>
- <name>ILINK</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>20</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>IlinkLibIOConfig</name>
- <state>1</state>
- </option>
- <option>
- <name>XLinkMisraHandler</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkInputFileSlave</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOutputFile</name>
- <state>project.out</state>
- </option>
- <option>
- <name>IlinkDebugInfoEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkKeepSymbols</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryFile</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySymbol</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySegment</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryAlign</name>
- <state></state>
- </option>
- <option>
- <name>IlinkDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkConfigDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkMapFile</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogFile</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogInitialization</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogModule</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogSection</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogVeneer</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfOverride</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkIcfFile</name>
- <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
- </option>
- <option>
- <name>IlinkIcfFileSlave</name>
- <state></state>
- </option>
- <option>
- <name>IlinkEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkSuppressDiags</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsRem</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsWarn</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsErr</name>
- <state></state>
- </option>
- <option>
- <name>IlinkWarningsAreErrors</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkUseExtraOptions</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>IlinkLowLevelInterfaceSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAutoLibEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAdditionalLibs</name>
- <state></state>
- </option>
- <option>
- <name>IlinkOverrideProgramEntryLabel</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabelSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabel</name>
- <state>__iar_program_start</state>
- </option>
- <option>
- <name>DoFill</name>
- <state>0</state>
- </option>
- <option>
- <name>FillerByte</name>
- <state>0xFF</state>
- </option>
- <option>
- <name>FillerStart</name>
- <state>0x0</state>
- </option>
- <option>
- <name>FillerEnd</name>
- <state>0x0</state>
- </option>
- <option>
- <name>CrcSize</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>CrcAlign</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcPoly</name>
- <state>0x11021</state>
- </option>
- <option>
- <name>CrcCompl</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcBitOrder</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcInitialValue</name>
- <state>0x0</state>
- </option>
- <option>
- <name>DoCrc</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkBE8Slave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkBufferedTerminalOutput</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkStdoutInterfaceSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcFullSize</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIElfToolPostProcess</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogAutoLibSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogRedirSymbols</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogUnusedFragments</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCrcReverseByteOrder</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCrcUseAsInput</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptInline</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOptExceptionsAllow</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptExceptionsForce</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCmsis</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptMergeDuplSections</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOptUseVfe</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptForceVfe</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkStackAnalysisEnable</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkStackControlFile</name>
- <state></state>
- </option>
- <option>
- <name>IlinkStackCallGraphFile</name>
- <state></state>
- </option>
- <option>
- <name>CrcAlgorithm</name>
- <version>1</version>
- <state>1</state>
- </option>
- <option>
- <name>CrcUnitSize</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>IlinkThreadsSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkLogCallGraph</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfFile_AltDefault</name>
- <state></state>
- </option>
- <option>
- <name>IlinkEncInput</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkEncOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkEncOutputBom</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkHeapSelect</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkLocaleSelect</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>IARCHIVE</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>1</debug>
- <option>
- <name>IarchiveInputs</name>
- <state></state>
- </option>
- <option>
- <name>IarchiveOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>IarchiveOutput</name>
- <state>###Unitialized###</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>BILINK</name>
- <archiveVersion>0</archiveVersion>
- <data />
- </settings>
- </configuration>
- <configuration>
- <name>Release</name>
- <toolchain>
- <name>ARM</name>
- </toolchain>
+ <option>
+ <name>ExePath</name>
+ <state>build\iar\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>build\iar\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>build\iar\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>6.30.6.53380</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>8.11.3.13977</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>STM32L475VE ST STM32L475VE</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>STM32L475VE ST STM32L475VE</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>4</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>39</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state />
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state />
+ </option>
+ <option>
+ <name>DSPExtension</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state />
+ <state>STM32L476xx</state>
+ <state>RT_USING_DLIBC</state>
+ <state>USE_HAL_DRIVER</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state />
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>00000000</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state />
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state />
+ <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
+ <state>$PROJ_DIR$\board\ports</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
+ <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\applications</state>
+ <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
+ <state>$PROJ_DIR$\board</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+ <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
+ <state>$PROJ_DIR$\..\..\..\include</state>
+ <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state />
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state />
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state />
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state />
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>../../../rtthread.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions />
+ <cmdline />
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild />
+ <postbuild />
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>project.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state />
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+ <configuration>
+ <name>Release</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>0</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>29</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>ExePath</name>
+ <state>Release\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>Release\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>Release\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state />
+ </option>
+ <option>
+ <name>Output description</name>
+ <state />
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state />
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>6.30.6.53380</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>8.11.3.13977</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>Default None</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state />
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>Default None</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state />
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state />
+ </option>
+ <option>
+ <name>DSPExtension</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state>STM32L476xx</state>
+ <state>RT_USING_DLIBC</state>
+ <state>USE_HAL_DRIVER</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state />
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>11111110</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state />
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state />
+ <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
+ <state>$PROJ_DIR$\board\ports</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
+ <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
+ <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\applications</state>
+ <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
+ <state>$PROJ_DIR$\board</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+ <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
+ <state>$PROJ_DIR$\..\..\..\include</state>
+ <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state />
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state />
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state />
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state />
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions />
+ <cmdline />
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild />
+ <postbuild />
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>###Unitialized###</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>lnk0t.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state />
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
<debug>0</debug>
- <settings>
- <name>General</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <version>29</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>ExePath</name>
- <state>Release\Exe</state>
- </option>
- <option>
- <name>ObjPath</name>
- <state>Release\Obj</state>
- </option>
- <option>
- <name>ListPath</name>
- <state>Release\List</state>
- </option>
- <option>
- <name>GEndianMode</name>
- <state>0</state>
- </option>
- <option>
- <name>Input description</name>
- <state></state>
- </option>
- <option>
- <name>Output description</name>
- <state></state>
- </option>
- <option>
- <name>GOutputBinary</name>
- <state>0</state>
- </option>
- <option>
- <name>OGCoreOrChip</name>
- <state>0</state>
- </option>
- <option>
- <name>GRuntimeLibSelect</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>GRuntimeLibSelectSlave</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>RTDescription</name>
- <state></state>
- </option>
- <option>
- <name>OGProductVersion</name>
- <state>6.30.6.53380</state>
- </option>
- <option>
- <name>OGLastSavedByProductVersion</name>
- <state>8.11.3.13977</state>
- </option>
- <option>
- <name>GeneralEnableMisra</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraVerbose</name>
- <state>0</state>
- </option>
- <option>
- <name>OGChipSelectEditMenu</name>
- <state>Default None</state>
- </option>
- <option>
- <name>GenLowLevelInterface</name>
- <state>0</state>
- </option>
- <option>
- <name>GEndianModeBE</name>
- <state>0</state>
- </option>
- <option>
- <name>OGBufferedTerminalOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>GenStdoutInterface</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraRules98</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>GeneralMisraVer</name>
- <state>0</state>
- </option>
- <option>
- <name>GeneralMisraRules04</name>
- <version>0</version>
- <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
- </option>
- <option>
- <name>RTConfigPath2</name>
- <state></state>
- </option>
- <option>
- <name>GBECoreSlave</name>
- <version>25</version>
- <state>1</state>
- </option>
- <option>
- <name>OGUseCmsis</name>
- <state>0</state>
- </option>
- <option>
- <name>OGUseCmsisDspLib</name>
- <state>0</state>
- </option>
- <option>
- <name>GRuntimeLibThreads</name>
- <state>0</state>
- </option>
- <option>
- <name>CoreVariant</name>
- <version>25</version>
- <state>0</state>
- </option>
- <option>
- <name>GFPUDeviceSlave</name>
- <state>Default None</state>
- </option>
- <option>
- <name>FPU2</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>NrRegs</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>NEON</name>
- <state>0</state>
- </option>
- <option>
- <name>GFPUCoreSlave2</name>
- <version>25</version>
- <state>0</state>
- </option>
- <option>
- <name>OGCMSISPackSelectDevice</name>
- </option>
- <option>
- <name>OgLibHeap</name>
- <state>0</state>
- </option>
- <option>
- <name>OGLibAdditionalLocale</name>
- <state>0</state>
- </option>
- <option>
- <name>OGPrintfVariant</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>OGPrintfMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>OGScanfVariant</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>OGScanfMultibyteSupport</name>
- <state>0</state>
- </option>
- <option>
- <name>GenLocaleTags</name>
- <state></state>
- </option>
- <option>
- <name>GenLocaleDisplayOnly</name>
- <state></state>
- </option>
- <option>
- <name>DSPExtension</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>ICCARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>34</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>CCOptimizationNoSizeConstraints</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDefines</name>
- <state>STM32L476xx</state>
- <state>USE_HAL_DRIVER</state>
- </option>
- <option>
- <name>CCPreprocFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocComments</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPreprocLine</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMnemonics</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListCMessages</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssFile</name>
- <state>0</state>
- </option>
- <option>
- <name>CCListAssSource</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagSuppress</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagRemark</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagWarning</name>
- <state></state>
- </option>
- <option>
- <name>CCDiagError</name>
- <state></state>
- </option>
- <option>
- <name>CCObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>CCAllowList</name>
- <version>1</version>
- <state>11111110</state>
- </option>
- <option>
- <name>CCDebugInfo</name>
- <state>0</state>
- </option>
- <option>
- <name>IEndianMode</name>
- <state>1</state>
- </option>
- <option>
- <name>IProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>IExtraOptionsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>IExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>CCLangConformance</name>
- <state>0</state>
- </option>
- <option>
- <name>CCSignedPlainChar</name>
- <state>1</state>
- </option>
- <option>
- <name>CCRequirePrototypes</name>
- <state>0</state>
- </option>
- <option>
- <name>CCDiagWarnAreErr</name>
- <state>0</state>
- </option>
- <option>
- <name>CCCompilerRuntimeInfo</name>
- <state>0</state>
- </option>
- <option>
- <name>IFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>OutputFile</name>
- <state></state>
- </option>
- <option>
- <name>CCLibConfigHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>PreInclude</name>
- <state></state>
- </option>
- <option>
- <name>CompilerMisraOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>CCIncludePath2</name>
- <state>$PROJ_DIR$\..\..\..\components\finsh</state>
- <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
- <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
- <state>$PROJ_DIR$\board\ports</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
- <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
- <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
- <state>$PROJ_DIR$\.</state>
- <state>$PROJ_DIR$\applications</state>
- <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
- <state>$PROJ_DIR$\board</state>
- <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
- <state>$PROJ_DIR$\..\..\..\include</state>
- <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
- </option>
- <option>
- <name>CCStdIncCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>CCCodeSection</name>
- <state>.text</state>
- </option>
- <option>
- <name>IProcessorMode2</name>
- <state>1</state>
- </option>
- <option>
- <name>CCOptLevel</name>
- <state>3</state>
- </option>
- <option>
- <name>CCOptStrategy</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CCOptLevelSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>CompilerMisraRules98</name>
- <version>0</version>
- <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
- </option>
- <option>
- <name>CompilerMisraRules04</name>
- <version>0</version>
- <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
- </option>
- <option>
- <name>CCPosIndRopi</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPosIndRwpi</name>
- <state>0</state>
- </option>
- <option>
- <name>CCPosIndNoDynInit</name>
- <state>0</state>
- </option>
- <option>
- <name>IccLang</name>
- <state>0</state>
- </option>
- <option>
- <name>IccCDialect</name>
- <state>1</state>
- </option>
- <option>
- <name>IccAllowVLA</name>
- <state>0</state>
- </option>
- <option>
- <name>IccStaticDestr</name>
- <state>1</state>
- </option>
- <option>
- <name>IccCppInlineSemantics</name>
- <state>0</state>
- </option>
- <option>
- <name>IccCmsis</name>
- <state>1</state>
- </option>
- <option>
- <name>IccFloatSemantics</name>
- <state>0</state>
- </option>
- <option>
- <name>CCNoLiteralPool</name>
- <state>0</state>
- </option>
- <option>
- <name>CCOptStrategySlave</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CCGuardCalls</name>
- <state>1</state>
- </option>
- <option>
- <name>CCEncSource</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEncOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>CCEncOutputBom</name>
- <state>1</state>
- </option>
- <option>
- <name>CCEncInput</name>
- <state>0</state>
- </option>
- <option>
- <name>IccExceptions2</name>
- <state>0</state>
- </option>
- <option>
- <name>IccRTTI2</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>AARM</name>
- <archiveVersion>2</archiveVersion>
- <data>
- <version>10</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>AObjPrefix</name>
- <state>1</state>
- </option>
- <option>
- <name>AEndian</name>
- <state>1</state>
- </option>
- <option>
- <name>ACaseSensitivity</name>
- <state>1</state>
- </option>
- <option>
- <name>MacroChars</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>AWarnEnable</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnWhat</name>
- <state>0</state>
- </option>
- <option>
- <name>AWarnOne</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange1</name>
- <state></state>
- </option>
- <option>
- <name>AWarnRange2</name>
- <state></state>
- </option>
- <option>
- <name>ADebug</name>
- <state>0</state>
- </option>
- <option>
- <name>AltRegisterNames</name>
- <state>0</state>
- </option>
- <option>
- <name>ADefines</name>
- <state></state>
- </option>
- <option>
- <name>AList</name>
- <state>0</state>
- </option>
- <option>
- <name>AListHeader</name>
- <state>1</state>
- </option>
- <option>
- <name>AListing</name>
- <state>1</state>
- </option>
- <option>
- <name>Includes</name>
- <state>0</state>
- </option>
- <option>
- <name>MacDefs</name>
- <state>0</state>
- </option>
- <option>
- <name>MacExps</name>
- <state>1</state>
- </option>
- <option>
- <name>MacExec</name>
- <state>0</state>
- </option>
- <option>
- <name>OnlyAssed</name>
- <state>0</state>
- </option>
- <option>
- <name>MultiLine</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLengthCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>PageLength</name>
- <state>80</state>
- </option>
- <option>
- <name>TabSpacing</name>
- <state>8</state>
- </option>
- <option>
- <name>AXRef</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDefines</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefInternal</name>
- <state>0</state>
- </option>
- <option>
- <name>AXRefDual</name>
- <state>0</state>
- </option>
- <option>
- <name>AProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AFpuProcessor</name>
- <state>1</state>
- </option>
- <option>
- <name>AOutputFile</name>
- <state></state>
- </option>
- <option>
- <name>ALimitErrorsCheck</name>
- <state>0</state>
- </option>
- <option>
- <name>ALimitErrorsEdit</name>
- <state>100</state>
- </option>
- <option>
- <name>AIgnoreStdInclude</name>
- <state>0</state>
- </option>
- <option>
- <name>AUserIncludes</name>
- <state></state>
- </option>
- <option>
- <name>AExtraOptionsCheckV2</name>
- <state>0</state>
- </option>
- <option>
- <name>AExtraOptionsV2</name>
- <state></state>
- </option>
- <option>
- <name>AsmNoLiteralPool</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>OBJCOPY</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>1</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>OOCOutputFormat</name>
- <version>3</version>
- <state>0</state>
- </option>
- <option>
- <name>OCOutputOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>OOCOutputFile</name>
- <state></state>
- </option>
- <option>
- <name>OOCCommandLineProducer</name>
- <state>1</state>
- </option>
- <option>
- <name>OOCObjCopyEnable</name>
- <state>0</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>CUSTOM</name>
- <archiveVersion>3</archiveVersion>
- <data>
- <extensions></extensions>
- <cmdline></cmdline>
- <hasPrio>0</hasPrio>
- </data>
- </settings>
- <settings>
- <name>BICOMP</name>
- <archiveVersion>0</archiveVersion>
- <data />
- </settings>
- <settings>
- <name>BUILDACTION</name>
- <archiveVersion>1</archiveVersion>
- <data>
- <prebuild></prebuild>
- <postbuild></postbuild>
- </data>
- </settings>
- <settings>
- <name>ILINK</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>20</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>IlinkLibIOConfig</name>
- <state>1</state>
- </option>
- <option>
- <name>XLinkMisraHandler</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkInputFileSlave</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOutputFile</name>
- <state>###Unitialized###</state>
- </option>
- <option>
- <name>IlinkDebugInfoEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkKeepSymbols</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryFile</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySymbol</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinarySegment</name>
- <state></state>
- </option>
- <option>
- <name>IlinkRawBinaryAlign</name>
- <state></state>
- </option>
- <option>
- <name>IlinkDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkConfigDefines</name>
- <state></state>
- </option>
- <option>
- <name>IlinkMapFile</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogFile</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogInitialization</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogModule</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogSection</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogVeneer</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfFile</name>
- <state>lnk0t.icf</state>
- </option>
- <option>
- <name>IlinkIcfFileSlave</name>
- <state></state>
- </option>
- <option>
- <name>IlinkEnableRemarks</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkSuppressDiags</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsRem</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsWarn</name>
- <state></state>
- </option>
- <option>
- <name>IlinkTreatAsErr</name>
- <state></state>
- </option>
- <option>
- <name>IlinkWarningsAreErrors</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkUseExtraOptions</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkExtraOptions</name>
- <state></state>
- </option>
- <option>
- <name>IlinkLowLevelInterfaceSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAutoLibEnable</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkAdditionalLibs</name>
- <state></state>
- </option>
- <option>
- <name>IlinkOverrideProgramEntryLabel</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabelSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkProgramEntryLabel</name>
- <state></state>
- </option>
- <option>
- <name>DoFill</name>
- <state>0</state>
- </option>
- <option>
- <name>FillerByte</name>
- <state>0xFF</state>
- </option>
- <option>
- <name>FillerStart</name>
- <state>0x0</state>
- </option>
- <option>
- <name>FillerEnd</name>
- <state>0x0</state>
- </option>
- <option>
- <name>CrcSize</name>
- <version>0</version>
- <state>1</state>
- </option>
- <option>
- <name>CrcAlign</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcPoly</name>
- <state>0x11021</state>
- </option>
- <option>
- <name>CrcCompl</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcBitOrder</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>CrcInitialValue</name>
- <state>0x0</state>
- </option>
- <option>
- <name>DoCrc</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkBE8Slave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkBufferedTerminalOutput</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkStdoutInterfaceSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>CrcFullSize</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIElfToolPostProcess</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogAutoLibSelect</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogRedirSymbols</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkLogUnusedFragments</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCrcReverseByteOrder</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCrcUseAsInput</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptInline</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptExceptionsAllow</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptExceptionsForce</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkCmsis</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptMergeDuplSections</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkOptUseVfe</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkOptForceVfe</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkStackAnalysisEnable</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkStackControlFile</name>
- <state></state>
- </option>
- <option>
- <name>IlinkStackCallGraphFile</name>
- <state></state>
- </option>
- <option>
- <name>CrcAlgorithm</name>
- <version>1</version>
- <state>1</state>
- </option>
- <option>
- <name>CrcUnitSize</name>
- <version>0</version>
- <state>0</state>
- </option>
- <option>
- <name>IlinkThreadsSlave</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkLogCallGraph</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkIcfFile_AltDefault</name>
- <state></state>
- </option>
- <option>
- <name>IlinkEncInput</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkEncOutput</name>
- <state>0</state>
- </option>
- <option>
- <name>IlinkEncOutputBom</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkHeapSelect</name>
- <state>1</state>
- </option>
- <option>
- <name>IlinkLocaleSelect</name>
- <state>1</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>IARCHIVE</name>
- <archiveVersion>0</archiveVersion>
- <data>
- <version>0</version>
- <wantNonLocal>1</wantNonLocal>
- <debug>0</debug>
- <option>
- <name>IarchiveInputs</name>
- <state></state>
- </option>
- <option>
- <name>IarchiveOverride</name>
- <state>0</state>
- </option>
- <option>
- <name>IarchiveOutput</name>
- <state>###Unitialized###</state>
- </option>
- </data>
- </settings>
- <settings>
- <name>BILINK</name>
- <archiveVersion>0</archiveVersion>
- <data />
- </settings>
- </configuration>
- <group>
- <name>Applications</name>
- <file>
- <name>$PROJ_DIR$\applications\main.c</name>
- </file>
- </group>
- <group>
- <name>cpu</name>
- <file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
- </file>
- </group>
- <group>
- <name>DeviceDrivers</name>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
- </file>
- </group>
- <group>
- <name>Drivers</name>
- <file>
- <name>$PROJ_DIR$\board\board.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
- </file>
- <file>
- <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
- </file>
- </group>
- <group>
- <name>finsh</name>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
- </file>
- </group>
- <group>
- <name>Kernel</name>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\components.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\device.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\object.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
- </file>
- </group>
- <group>
- <name>STM32_HAL</name>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
- </file>
- <file>
- <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
- </file>
- </group>
+ <option>
+ <name>IarchiveInputs</name>
+ <state />
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+ <group>
+ <name>Kernel</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\components.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\device.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\object.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
+ </file>
+ </group>
+ <group>
+ <name>Applications</name>
+ <file>
+ <name>$PROJ_DIR$\applications\main.c</name>
+ </file>
+ </group>
+ <group>
+ <name>Drivers</name>
+ <file>
+ <name>$PROJ_DIR$\board\board.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
+ </file>
+ </group>
+ <group>
+ <name>cpu</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
+ </file>
+ </group>
+ <group>
+ <name>DeviceDrivers</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
+ </file>
+ </group>
+ <group>
+ <name>finsh</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
+ </file>
+ </group>
+ <group>
+ <name>libc</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\gmtime_r.c</name>
+ </file>
+ </group>
+ <group>
+ <name>dlib</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\libc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\rmtx.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\stdio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\time.c</name>
+ </file>
+ </group>
+ <group>
+ <name>STM32_HAL</name>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
+ </file>
+ </group>
</project>
diff --git a/bsp/stm32/stm32l476-st-nucleo/project.uvoptx b/bsp/stm32/stm32l476-st-nucleo/project.uvoptx index 2ea89dc602..23f1113678 100644 --- a/bsp/stm32/stm32l476-st-nucleo/project.uvoptx +++ b/bsp/stm32/stm32l476-st-nucleo/project.uvoptx @@ -182,827 +182,11 @@ </Target> <Group> - <GroupName>Kernel</GroupName> + <GroupName>Source Group 1</GroupName> <tvExp>0</tvExp> <tvExpOptDlg>0</tvExpOptDlg> <cbSel>0</cbSel> <RteFlg>0</RteFlg> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>1</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\clock.c</PathWithFileName> - <FilenameWithoutPath>clock.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>2</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\components.c</PathWithFileName> - <FilenameWithoutPath>components.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>3</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\cpu.c</PathWithFileName> - <FilenameWithoutPath>cpu.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>4</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\device.c</PathWithFileName> - <FilenameWithoutPath>device.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>5</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\idle.c</PathWithFileName> - <FilenameWithoutPath>idle.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>6</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName> - <FilenameWithoutPath>ipc.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>7</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\irq.c</PathWithFileName> - <FilenameWithoutPath>irq.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>8</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName> - <FilenameWithoutPath>kservice.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>9</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\mem.c</PathWithFileName> - <FilenameWithoutPath>mem.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>10</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName> - <FilenameWithoutPath>mempool.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>11</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\object.c</PathWithFileName> - <FilenameWithoutPath>object.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>12</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName> - <FilenameWithoutPath>scheduler.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>13</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\signal.c</PathWithFileName> - <FilenameWithoutPath>signal.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>14</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\thread.c</PathWithFileName> - <FilenameWithoutPath>thread.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>1</GroupNumber> - <FileNumber>15</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\src\timer.c</PathWithFileName> - <FilenameWithoutPath>timer.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>Applications</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>2</GroupNumber> - <FileNumber>16</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>applications\main.c</PathWithFileName> - <FilenameWithoutPath>main.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>Drivers</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>17</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>board\board.c</PathWithFileName> - <FilenameWithoutPath>board.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>18</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_msp.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>19</FileNumber> - <FileType>2</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</PathWithFileName> - <FilenameWithoutPath>startup_stm32l476xx.s</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>20</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName> - <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>21</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName> - <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>3</GroupNumber> - <FileNumber>22</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName> - <FilenameWithoutPath>drv_common.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>cpu</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>4</GroupNumber> - <FileNumber>23</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName> - <FilenameWithoutPath>backtrace.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>4</GroupNumber> - <FileNumber>24</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName> - <FilenameWithoutPath>div0.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>4</GroupNumber> - <FileNumber>25</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName> - <FilenameWithoutPath>showmem.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>4</GroupNumber> - <FileNumber>26</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName> - <FilenameWithoutPath>cpuport.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>4</GroupNumber> - <FileNumber>27</FileNumber> - <FileType>2</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName> - <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>DeviceDrivers</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>28</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName> - <FilenameWithoutPath>pin.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>29</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName> - <FilenameWithoutPath>serial.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>30</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\completion.c</PathWithFileName> - <FilenameWithoutPath>completion.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>31</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\dataqueue.c</PathWithFileName> - <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>32</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\pipe.c</PathWithFileName> - <FilenameWithoutPath>pipe.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>33</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\ringblk_buf.c</PathWithFileName> - <FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>34</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\ringbuffer.c</PathWithFileName> - <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>35</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\waitqueue.c</PathWithFileName> - <FilenameWithoutPath>waitqueue.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>5</GroupNumber> - <FileNumber>36</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\drivers\src\workqueue.c</PathWithFileName> - <FilenameWithoutPath>workqueue.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>finsh</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>37</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName> - <FilenameWithoutPath>shell.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>38</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\symbol.c</PathWithFileName> - <FilenameWithoutPath>symbol.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>39</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName> - <FilenameWithoutPath>cmd.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>40</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName> - <FilenameWithoutPath>msh.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>41</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\msh_cmd.c</PathWithFileName> - <FilenameWithoutPath>msh_cmd.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>6</GroupNumber> - <FileNumber>42</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\..\..\components\finsh\msh_file.c</PathWithFileName> - <FilenameWithoutPath>msh_file.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - </Group> - - <Group> - <GroupName>STM32_HAL</GroupName> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <cbSel>0</cbSel> - <RteFlg>0</RteFlg> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>43</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</PathWithFileName> - <FilenameWithoutPath>system_stm32l4xx.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>44</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>45</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_comp.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>46</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_cortex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>47</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_crc.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>48</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_crc_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>49</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_cryp.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>50</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_cryp_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>51</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_dma.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>52</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_dma_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>53</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_exti.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>54</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_pwr.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>55</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_pwr_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>56</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_rcc.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>57</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_rcc_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>58</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_rng.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>59</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_sram.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>60</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_gpio.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>61</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_uart.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>62</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_uart_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>63</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_usart.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> - <File> - <GroupNumber>7</GroupNumber> - <FileNumber>64</FileNumber> - <FileType>1</FileType> - <tvExp>0</tvExp> - <tvExpOptDlg>0</tvExpOptDlg> - <bDave2>0</bDave2> - <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</PathWithFileName> - <FilenameWithoutPath>stm32l4xx_hal_usart_ex.c</FilenameWithoutPath> - <RteFlg>0</RteFlg> - <bShared>0</bShared> - </File> </Group> </ProjectOpt> diff --git a/bsp/stm32/stm32l476-st-nucleo/project.uvprojx b/bsp/stm32/stm32l476-st-nucleo/project.uvprojx index f94b364727..c4775ff651 100644 --- a/bsp/stm32/stm32l476-st-nucleo/project.uvprojx +++ b/bsp/stm32/stm32l476-st-nucleo/project.uvprojx @@ -1,10 +1,7 @@ <?xml version="1.0" encoding="UTF-8" standalone="no" ?> <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> - <SchemaVersion>2.1</SchemaVersion> - <Header>### uVision Project, (C) Keil Software</Header> - <Targets> <Target> <TargetName>rt-thread</TargetName> @@ -19,28 +16,28 @@ <PackID>Keil.STM32L4xx_DFP.2.0.0</PackID> <PackURL>http://www.keil.com/pack</PackURL> <Cpu>IRAM(0x20000000,0x00018000) IRAM2(0x10000000,0x00008000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu> - <FlashUtilSpec></FlashUtilSpec> - <StartupFile></StartupFile> + <FlashUtilSpec /> + <StartupFile /> <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32L476RGTx$CMSIS\Flash\STM32L4xx_1024.FLM))</FlashDriverDll> <DeviceId>0</DeviceId> <RegisterFile>$$Device:STM32L476RGTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h</RegisterFile> - <MemoryEnv></MemoryEnv> - <Cmp></Cmp> - <Asm></Asm> - <Linker></Linker> - <OHString></OHString> - <InfinionOptionDll></InfinionOptionDll> - <SLE66CMisc></SLE66CMisc> - <SLE66AMisc></SLE66AMisc> - <SLE66LinkerMisc></SLE66LinkerMisc> + <MemoryEnv /> + <Cmp /> + <Asm /> + <Linker /> + <OHString /> + <InfinionOptionDll /> + <SLE66CMisc /> + <SLE66AMisc /> + <SLE66LinkerMisc /> <SFDFile>$$Device:STM32L476RGTx$CMSIS\SVD\STM32L4x6.svd</SFDFile> <bCustSvd>0</bCustSvd> <UseEnv>0</UseEnv> - <BinPath></BinPath> - <IncludePath></IncludePath> - <LibPath></LibPath> - <RegisterFilePath></RegisterFilePath> - <DBRegisterFilePath></DBRegisterFilePath> + <BinPath /> + <IncludePath /> + <LibPath /> + <RegisterFilePath /> + <DBRegisterFilePath /> <TargetStatus> <Error>0</Error> <ExitCodeStop>0</ExitCodeStop> @@ -62,8 +59,8 @@ <BeforeCompile> <RunUserProg1>0</RunUserProg1> <RunUserProg2>0</RunUserProg2> - <UserProg1Name></UserProg1Name> - <UserProg2Name></UserProg2Name> + <UserProg1Name /> + <UserProg2Name /> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> <nStopU1X>0</nStopU1X> @@ -72,8 +69,8 @@ <BeforeMake> <RunUserProg1>0</RunUserProg1> <RunUserProg2>0</RunUserProg2> - <UserProg1Name></UserProg1Name> - <UserProg2Name></UserProg2Name> + <UserProg1Name /> + <UserProg2Name /> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> <nStopB1X>0</nStopB1X> @@ -83,14 +80,14 @@ <RunUserProg1>1</RunUserProg1> <RunUserProg2>0</RunUserProg2> <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> - <UserProg2Name></UserProg2Name> + <UserProg2Name /> <UserProg1Dos16Mode>0</UserProg1Dos16Mode> <UserProg2Dos16Mode>0</UserProg2Dos16Mode> <nStopA1X>0</nStopA1X> <nStopA2X>0</nStopA2X> </AfterMake> <SelectedForBatchBuild>0</SelectedForBatchBuild> - <SVCSIdString></SVCSIdString> + <SVCSIdString /> </TargetCommonOption> <CommonProperty> <UseCPPCompiler>0</UseCPPCompiler> @@ -104,8 +101,8 @@ <AssembleAssemblyFile>0</AssembleAssemblyFile> <PublicsOnly>0</PublicsOnly> <StopOnExitCode>3</StopOnExitCode> - <CustomArgument></CustomArgument> - <IncludeLibraryModules></IncludeLibraryModules> + <CustomArgument /> + <IncludeLibraryModules /> <ComprImg>1</ComprImg> </CommonProperty> <DllOption> @@ -138,11 +135,11 @@ </Flash1> <bUseTDR>1</bUseTDR> <Flash2>BIN\UL2CM3.DLL</Flash2> - <Flash3></Flash3> - <Flash4></Flash4> - <pFcarmOut></pFcarmOut> - <pFcarmGrp></pFcarmGrp> - <pFcArmRoot></pFcArmRoot> + <Flash3 /> + <Flash4 /> + <pFcarmOut /> + <pFcarmGrp /> + <pFcArmRoot /> <FcArmLst>0</FcArmLst> </Utilities> <TargetArmAds> @@ -175,7 +172,7 @@ <RvctClst>0</RvctClst> <GenPPlst>0</GenPPlst> <AdsCpuType>"Cortex-M4"</AdsCpuType> - <RvctDeviceName></RvctDeviceName> + <RvctDeviceName /> <mOS>0</mOS> <uocRom>0</uocRom> <uocRam>0</uocRam> @@ -308,7 +305,7 @@ <Size>0x8000</Size> </OCR_RVCT10> </OnChipMemories> - <RvctStartVector></RvctStartVector> + <RvctStartVector /> </ArmAdsMisc> <Cads> <interw>1</interw> @@ -335,10 +332,10 @@ <v6WtE>0</v6WtE> <v6Rtti>0</v6Rtti> <VariousControls> - <MiscControls></MiscControls> - <Define>USE_HAL_DRIVER, STM32L476xx</Define> - <Undefine></Undefine> - <IncludePath>.;..\..\..\include;.;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath> + <MiscControls /> + <Define>USE_HAL_DRIVER, STM32L476xx, RT_USING_ARM_LIBC</Define> + <Undefine /> + <IncludePath>.;..\..\..\include;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\armlibc;..\..\..\components\libc\compilers\common;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath> </VariousControls> </Cads> <Aads> @@ -353,10 +350,10 @@ <useXO>0</useXO> <uClangAs>0</uClangAs> <VariousControls> - <MiscControls></MiscControls> - <Define></Define> - <Undefine></Undefine> - <IncludePath></IncludePath> + <MiscControls /> + <Define /> + <Undefine /> + <IncludePath /> </VariousControls> </Aads> <LDads> @@ -368,13 +365,13 @@ <useFile>0</useFile> <TextAddressRange>0x08000000</TextAddressRange> <DataAddressRange>0x20000000</DataAddressRange> - <pXoBase></pXoBase> + <pXoBase /> <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> - <IncludeLibs></IncludeLibs> - <IncludeLibsPath></IncludeLibsPath> + <IncludeLibs /> + <IncludeLibsPath /> <Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc> - <LinkerInputFile></LinkerInputFile> - <DisabledWarnings></DisabledWarnings> + <LinkerInputFile /> + <DisabledWarnings /> </LDads> </TargetArmAds> </TargetOption> @@ -387,71 +384,99 @@ <FileType>1</FileType> <FilePath>..\..\..\src\clock.c</FilePath> </File> + </Files> + <Files> <File> <FileName>components.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\components.c</FilePath> </File> + </Files> + <Files> <File> <FileName>cpu.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\cpu.c</FilePath> </File> + </Files> + <Files> <File> <FileName>device.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\device.c</FilePath> </File> + </Files> + <Files> <File> <FileName>idle.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\idle.c</FilePath> </File> + </Files> + <Files> <File> <FileName>ipc.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\ipc.c</FilePath> </File> + </Files> + <Files> <File> <FileName>irq.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\irq.c</FilePath> </File> + </Files> + <Files> <File> <FileName>kservice.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\kservice.c</FilePath> </File> + </Files> + <Files> <File> <FileName>mem.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\mem.c</FilePath> </File> + </Files> + <Files> <File> <FileName>mempool.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\mempool.c</FilePath> </File> + </Files> + <Files> <File> <FileName>object.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\object.c</FilePath> </File> + </Files> + <Files> <File> <FileName>scheduler.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\scheduler.c</FilePath> </File> + </Files> + <Files> <File> <FileName>signal.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\signal.c</FilePath> </File> + </Files> + <Files> <File> <FileName>thread.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\src\thread.c</FilePath> </File> + </Files> + <Files> <File> <FileName>timer.c</FileName> <FileType>1</FileType> @@ -477,26 +502,43 @@ <FileType>1</FileType> <FilePath>board\board.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_msp.c</FileName> <FileType>1</FileType> <FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath> </File> + </Files> + <Files> <File> <FileName>startup_stm32l476xx.s</FileName> <FileType>2</FileType> <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</FilePath> </File> + </Files> + <Files> <File> <FileName>drv_gpio.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath> </File> + </Files> + <Files> <File> <FileName>drv_usart.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath> </File> + </Files> + <Files> + <File> + <FileName>drv_soft_i2c.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\HAL_Drivers\drv_soft_i2c.c</FilePath> + </File> + </Files> + <Files> <File> <FileName>drv_common.c</FileName> <FileType>1</FileType> @@ -512,21 +554,29 @@ <FileType>1</FileType> <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath> </File> + </Files> + <Files> <File> <FileName>div0.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath> </File> + </Files> + <Files> <File> <FileName>showmem.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath> </File> + </Files> + <Files> <File> <FileName>cpuport.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath> </File> + </Files> + <Files> <File> <FileName>context_rvds.S</FileName> <FileType>2</FileType> @@ -538,45 +588,89 @@ <GroupName>DeviceDrivers</GroupName> <Files> <File> + <FileName>i2c_core.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\i2c\i2c_core.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>i2c_dev.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\i2c\i2c_dev.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>i2c-bit-ops.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath> + </File> + </Files> + <Files> + <File> <FileName>pin.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath> </File> + </Files> + <Files> + <File> + <FileName>rtc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\rtc\rtc.c</FilePath> + </File> + </Files> + <Files> <File> <FileName>serial.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath> </File> + </Files> + <Files> <File> <FileName>completion.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\completion.c</FilePath> </File> + </Files> + <Files> <File> <FileName>dataqueue.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath> </File> + </Files> + <Files> <File> <FileName>pipe.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath> </File> + </Files> + <Files> <File> <FileName>ringblk_buf.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath> </File> + </Files> + <Files> <File> <FileName>ringbuffer.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath> </File> + </Files> + <Files> <File> <FileName>waitqueue.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath> </File> + </Files> + <Files> <File> <FileName>workqueue.c</FileName> <FileType>1</FileType> @@ -592,26 +686,36 @@ <FileType>1</FileType> <FilePath>..\..\..\components\finsh\shell.c</FilePath> </File> + </Files> + <Files> <File> <FileName>symbol.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\finsh\symbol.c</FilePath> </File> + </Files> + <Files> <File> <FileName>cmd.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\finsh\cmd.c</FilePath> </File> + </Files> + <Files> <File> <FileName>msh.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\finsh\msh.c</FilePath> </File> + </Files> + <Files> <File> <FileName>msh_cmd.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath> </File> + </Files> + <Files> <File> <FileName>msh_file.c</FileName> <FileType>1</FileType> @@ -620,6 +724,44 @@ </Files> </Group> <Group> + <GroupName>libc</GroupName> + <Files> + <File> + <FileName>libc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\libc\compilers\armlibc\libc.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>mem_std.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\libc\compilers\armlibc\mem_std.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stubs.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\libc\compilers\armlibc\stubs.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>time.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\libc\compilers\armlibc\time.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>gmtime_r.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\libc\compilers\common\gmtime_r.c</FilePath> + </File> + </Files> + </Group> + <Group> <GroupName>STM32_HAL</GroupName> <Files> <File> @@ -627,121 +769,189 @@ <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_comp.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_cortex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_crc.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_crc_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_cryp.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_cryp_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_dma.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_dma_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_exti.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_pwr.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_pwr_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_rcc.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_rcc_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_rng.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_sram.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_gpio.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_uart.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_uart_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_usart.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath> </File> + </Files> + <Files> <File> <FileName>stm32l4xx_hal_usart_ex.c</FileName> <FileType>1</FileType> <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath> </File> </Files> + <Files> + <File> + <FileName>stm32l4xx_hal_i2c.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32l4xx_hal_i2c_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32l4xx_hal_rtc.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32l4xx_hal_rtc_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c</FilePath> + </File> + </Files> </Group> </Groups> </Target> </Targets> - <RTE> - <apis/> - <components/> - <files/> + <apis /> + <components /> + <files /> </RTE> - </Project> diff --git a/bsp/stm32/stm32l476-st-nucleo/rtconfig.h b/bsp/stm32/stm32l476-st-nucleo/rtconfig.h index 08e1a6ed94..ac2fd6a542 100644 --- a/bsp/stm32/stm32l476-st-nucleo/rtconfig.h +++ b/bsp/stm32/stm32l476-st-nucleo/rtconfig.h @@ -78,9 +78,7 @@ #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL #define RT_SERIAL_USING_DMA -#define RT_SERIAL_RB_BUFSZ 64 #define RT_USING_PIN -#define RT_USING_RTC /* Using WiFi */ |