[add] sdmmc (sd_card and emmc) driver.

9 files changed, 1385 insertions, 12 deletions

diff --git a/bsp/stm32/libraries/STM32MPxx_HAL/SConscript b/bsp/stm32/libraries/STM32MPxx_HAL/SConscript
index 427cc65ac6..1e1d1934dc 100644
--- a/bsp/stm32/libraries/STM32MPxx_HAL/SConscript
+++ b/bsp/stm32/libraries/STM32MPxx_HAL/SConscript
@@ -35,10 +35,6 @@ if GetDepend(['RT_USING_SERIAL']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart.c']
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_uart_ex.c']
 
-#if GetDepend(['RT_USING_SPI']):
-#    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_spi.c']
-#    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_qspi.c']
-
 if GetDepend(['RT_USING_USB_HOST']) or GetDepend(['RT_USING_USB_DEVICE']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pccard.c']
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_pcd.c']
@@ -49,11 +45,6 @@ if GetDepend(['RT_USING_USB_HOST']) or GetDepend(['RT_USING_USB_DEVICE']):
 if GetDepend(['RT_USING_CAN']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_can.c']
 
-#if GetDepend(['RT_USING_HWTIMER']) or GetDepend(['RT_USING_PWM']) or GetDepend(['RT_USING_PULSE_ENCODER']):
-#    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim.c']
-#    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_tim_ex.c']
-#    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_lptim.c']
-
 if GetDepend(['BSP_USING_ETH']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_eth.c']
 
@@ -73,6 +64,7 @@ if GetDepend(['RT_USING_WDT']):
 if GetDepend(['RT_USING_SDIO']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_sdmmc.c']
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_sd.c']
+    src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_ll_delayblock.c']
 
 if GetDepend(['RT_USING_AUDIO']):
     src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_i2s.c']
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
index 424bdc02a2..d03109a24f 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
@@ -58,7 +58,7 @@
 /*#define HAL_QSPI_MODULE_ENABLED   */
 /*#define HAL_RNG_MODULE_ENABLED   */
 /*#define HAL_SAI_MODULE_ENABLED   */
-/*#define HAL_SD_MODULE_ENABLED   */
+#define HAL_SD_MODULE_ENABLED
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_RTC_MODULE_ENABLED   */
 /*#define HAL_SMBUS_MODULE_ENABLED   */
@@ -153,6 +153,8 @@
   #define CSI_VALUE    4000000U /*!< Value of the Internal oscillator in Hz*/
 #endif /* CSI_VALUE */
 
+#define  USE_SD_TRANSCEIVER           1U
+   
 /**
   * @brief External clock source for I2S peripheral
   *        This value is used by the I2S HAL module to compute the I2S clock source 
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
index 5e6a4a3d34..523df62925 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
@@ -966,6 +966,242 @@ void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hI2c)
 }
 
 /**
+* @brief SD MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hsd: SD handle pointer
+* @retval None
+*/
+void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
+{
+    GPIO_InitTypeDef GPIO_InitStruct = {0};
+    RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+    if(hsd->Instance==SDMMC1)
+    {
+        /* USER CODE BEGIN SDMMC1_MspInit 0 */
+        if (IS_ENGINEERING_BOOT_MODE())
+        {
+            /** Initializes the peripherals clock 
+            */
+            PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
+            PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
+            if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+            {
+                Error_Handler();
+            }
+        }
+        /* USER CODE END SDMMC1_MspInit 0 */
+        /* Peripheral clock enable */
+        __HAL_RCC_SDMMC1_CLK_ENABLE();
+
+        __HAL_RCC_GPIOB_CLK_ENABLE();
+        __HAL_RCC_GPIOC_CLK_ENABLE();
+        __HAL_RCC_GPIOD_CLK_ENABLE();
+        __HAL_RCC_GPIOE_CLK_ENABLE();
+        __HAL_RCC_GPIOF_CLK_ENABLE();
+        /**SDMMC1 GPIO Configuration
+        PB9     ------> SDMMC1_CDIR
+        PC7     ------> SDMMC1_D123DIR
+        PC8     ------> SDMMC1_D0
+        PC9     ------> SDMMC1_D1
+        PC10    ------> SDMMC1_D2
+        PC11    ------> SDMMC1_D3
+        PC12    ------> SDMMC1_CK
+        PD2     ------> SDMMC1_CMD
+        PE4     ------> SDMMC1_CKIN
+        PF2     ------> SDMMC1_D0DIR 
+        */
+        GPIO_InitStruct.Pin = GPIO_PIN_9;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLUP;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF11_SDIO1;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_2;
+        HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_7;
+        GPIO_InitStruct.Alternate = GPIO_AF8_SDIO1;
+        HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+            
+        GPIO_InitStruct.Pin = GPIO_PIN_4;
+        HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+          
+        GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+                             |GPIO_PIN_12;
+        GPIO_InitStruct.Pull = GPIO_NOPULL;
+        GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
+        HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_2;
+        HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+        __HAL_RCC_SDMMC1_FORCE_RESET();
+        __HAL_RCC_SDMMC1_RELEASE_RESET();
+
+        /* SDMMC1 interrupt Init */
+        HAL_NVIC_SetPriority(SDMMC1_IRQn, 2, 0);
+        HAL_NVIC_EnableIRQ(SDMMC1_IRQn);
+        /* USER CODE BEGIN SDMMC1_MspInit 1 */
+
+        /* USER CODE END SDMMC1_MspInit 1 */
+    }
+    
+    if(hsd->Instance==SDMMC2)
+    {
+        /* USER CODE BEGIN SDMMC2_MspInit 0 */
+        if (IS_ENGINEERING_BOOT_MODE())
+        {
+            /** Initializes the peripherals clock 
+            */
+            PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
+            PeriphClkInit.PeriphClockSelection  = RCC_PERIPHCLK_SDMMC12;
+            if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+            {
+                Error_Handler();
+            }
+        }
+        /* USER CODE END SDMMC2_MspInit 0 */
+        /* Peripheral clock enable */
+        __HAL_RCC_SDMMC2_CLK_ENABLE();
+
+        __HAL_RCC_GPIOA_CLK_ENABLE();
+        __HAL_RCC_GPIOB_CLK_ENABLE();
+        __HAL_RCC_GPIOD_CLK_ENABLE();
+        __HAL_RCC_GPIOE_CLK_ENABLE();
+        __HAL_RCC_GPIOG_CLK_ENABLE();
+        /**SDMMC2 GPIO Configuration
+        PB14     ------> SDMMC2_D0
+        PB15     ------> SDMMC2_D1
+        PB3      ------> SDMMC2_D2
+        PB4      ------> SDMMC2_D3
+        PA8      ------> SDMMC2_D4
+        PA9      ------> SDMMC2_D5
+        PE5      ------> SDMMC2_D6
+        PD3      ------> SDMMC2_D7       
+        PE3      ------> SDMMC2_CK
+        PG6      ------> SDMMC2_CMD
+        */
+        GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_14|GPIO_PIN_15;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLUP;
+        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF9_SDIO2;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_8;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_3;
+        HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+            
+        GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
+        HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+          
+        GPIO_InitStruct.Pin = GPIO_PIN_9;
+        GPIO_InitStruct.Alternate = GPIO_AF10_SDIO2;
+        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin = GPIO_PIN_6;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+        __HAL_RCC_SDMMC2_FORCE_RESET();
+        __HAL_RCC_SDMMC2_RELEASE_RESET();
+
+        /* SDMMC2 interrupt Init */
+        HAL_NVIC_SetPriority(SDMMC2_IRQn, 0X05, 0);
+        HAL_NVIC_EnableIRQ(SDMMC2_IRQn);
+        /* USER CODE BEGIN SDMMC2_MspInit 1 */
+
+        /* USER CODE END SDMMC2_MspInit 1 */
+    }
+}
+
+/**
+* @brief SD MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hsd: SD handle pointer
+* @retval None
+*/
+void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
+{
+  if(hsd->Instance==SDMMC1)
+  {
+  /* USER CODE BEGIN SDMMC1_MspDeInit 0 */
+
+  /* USER CODE END SDMMC1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SDMMC1_CLK_DISABLE();
+  
+    /**SDMMC1 GPIO Configuration    
+    PB9     ------> SDMMC1_CDIR
+    PC7     ------> SDMMC1_D123DIR
+    PC8     ------> SDMMC1_D0
+    PC9     ------> SDMMC1_D1
+    PC10    ------> SDMMC1_D2
+    PC11    ------> SDMMC1_D3
+    PC12    ------> SDMMC1_CK
+    PD2     ------> SDMMC1_CMD
+    PE4     ------> SDMMC1_CKIN
+    PF2     ------> SDMMC1_D0DIR 
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 
+                          |GPIO_PIN_12);
+
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_9);
+    
+    HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4);
+    
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2);
+    /* SDMMC1 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(SDMMC1_IRQn);
+  /* USER CODE BEGIN SDMMC1_MspDeInit 1 */
+
+  /* USER CODE END SDMMC1_MspDeInit 1 */
+  }
+  
+  if(hsd->Instance==SDMMC2)
+  {
+  /* USER CODE BEGIN SDMMC2_MspDeInit 0 */
+
+  /* USER CODE END SDMMC2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SDMMC2_CLK_DISABLE();
+  
+    /**SDMMC2 GPIO Configuration    
+        PB14     ------> SDMMC2_D0
+        PB15     ------> SDMMC2_D1
+        PB3      ------> SDMMC2_D2
+        PB4      ------> SDMMC2_D3
+        PA8      ------> SDMMC2_D4
+        PA9      ------> SDMMC2_D5
+        PE5      ------> SDMMC2_D6
+        PD3      ------> SDMMC2_D7       
+        PE3      ------> SDMMC2_CK
+        PG6      ------> SDMMC2_CMD
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_14|GPIO_PIN_15);
+
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8|GPIO_PIN_9);
+
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_3);
+    
+    HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3|GPIO_PIN_5);
+    
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6);
+    /* SDMMC2 interrupt DeInit */
+    HAL_NVIC_DisableIRQ(SDMMC2_IRQn);
+  /* USER CODE BEGIN SDMMC2_MspDeInit 1 */
+
+  /* USER CODE END SDMMC2_MspDeInit 1 */
+  }
+}
+
+/**
   * @brief  This function is executed in case of error occurrence.
   * @retval None
   */
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/Kconfig b/bsp/stm32/stm32mp157a-st-ev1/board/Kconfig
index 288015ffa6..2851e9aa2f 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/Kconfig
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/Kconfig
@@ -37,6 +37,32 @@ menu "Onboard Peripheral Drivers"
         bool "Enable Ethernet"
         default n
         select RT_USING_LWIP
+
+    menuconfig BSP_USING_SDMMC
+        bool "Enable SDMMC"
+        select RT_USING_SDIO
+        select RT_USING_DFS
+        select RT_USING_DFS_ELMFAT
+        select BSP_USING_PMIC
+        if BSP_USING_SDMMC
+            menuconfig BSP_USING_SD_CARD
+                bool "Enable sd card"
+                default n
+                if BSP_USING_SD_CARD
+                    config SD_USING_DFS
+                        bool "sd card fatfs"
+                        default n
+                endif
+
+            menuconfig BSP_USING_EMMC
+                bool "Enable eMMC (32 Gbits)"
+                default n
+                if BSP_USING_EMMC
+                    config EMMC_USING_DFS
+                        bool "emmc card fatfs"
+                        default n
+                endif
+        endif
 endmenu
 
 menu "On-chip Peripheral Drivers"
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/SConscript b/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
index aa3709cb9d..53043e2f75 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/SConscript
@@ -22,6 +22,12 @@ if GetDepend(['BSP_USING_NAND']):
 if GetDepend(['BSP_USING_GBE']):
     src += Glob('ports/eth/drv_eth.c')
 
+if GetDepend(['BSP_USING_SD_CARD']):
+    src += Glob('ports/drv_sdcard.c')
+
+if GetDepend(['BSP_USING_EMMC']):
+    src += Glob('ports/drv_emmc.c')
+
 if GetDepend(['BSP_USING_OPENAMP']):
     src +=  Glob('CubeMX_Config/CM4/Src/ipcc.c')
     src +=  Glob('CubeMX_Config/CM4/Src/openamp.c')
@@ -37,7 +43,6 @@ if GetDepend(['BSP_USING_OPENAMP']):
     src +=  Glob('ports/OpenAMP/virtual_driver/*.c')
     src +=  Glob('ports/OpenAMP/drv_openamp.c')
 
-
 path =  [cwd]
 path += [cwd + '/CubeMX_Config/CM4/Inc']
 path += [cwd + '/ports']
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.c b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.c
new file mode 100644
index 0000000000..f7d4eeffc2
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.c
@@ -0,0 +1,593 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-07-16     thread-liu   first version
+ */
+
+#include "board.h"
+#include "drv_emmc.h"
+#include <dfs_fs.h>
+
+#ifdef BSP_USING_EMMC
+
+//#define DRV_DEBUG
+//#define EMMC_RX_DUMP
+//#define EMMC_TX_DUMP
+#define DBG_TAG              "drv.emmc"
+#ifdef DRV_DEBUG
+#define DBG_LVL               DBG_LOG
+#else
+#define DBG_LVL               DBG_INFO
+#endif /* DRV_DEBUG */
+#include <rtdbg.h>
+
+static SD_HandleTypeDef hsd;
+static struct rt_mmcsd_host *host;
+#define SDIO_TX_RX_COMPLETE_TIMEOUT_LOOPS    (100000)
+
+#define RTHW_SDIO_LOCK(_sdio)   rt_mutex_take(&_sdio->mutex, RT_WAITING_FOREVER)
+#define RTHW_SDIO_UNLOCK(_sdio) rt_mutex_release(&_sdio->mutex);
+
+struct sdio_pkg
+{
+    struct rt_mmcsd_cmd *cmd;
+    void *buff;
+    rt_uint32_t flag;
+};
+
+struct rthw_sdio
+{
+    struct rt_mmcsd_host *host;
+    struct stm32_sdio_des sdio_des;
+    struct rt_event event;
+    struct rt_mutex mutex;
+    struct sdio_pkg *pkg;
+};
+
+#define EMMC_BUFF_SIZE       4096
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+rt_uint8_t cache_buf[SDIO_BUFF_SIZE] __attribute__((at(0x2FFCB000)));
+#elif defined(__ICCARM__)
+#pragma location = 0x2FFCB000
+rt_uint8_t cache_buf[EMMC_BUFF_SIZE];
+#elif defined ( __GNUC__ )
+rt_uint8_t cache_buf[SDIO_BUFF_SIZE] __attribute__((at(0x2FFCB000)));
+#endif
+
+#if defined(EMMC_RX_DUMP) || defined(EMMC_TX_DUMP)
+#define __is_print(ch) ((unsigned int)((ch) - ' ') < 127u - ' ')
+static void dump_hex(const rt_uint8_t *ptr, rt_size_t buflen)
+{
+    unsigned char *buf = (unsigned char *)ptr;
+    int i, j;
+
+    for (i = 0; i < buflen; i += 16)
+    {
+        rt_kprintf("%08X: ", i);
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%02X ", buf[i + j]);
+            else
+                rt_kprintf("   ");
+        rt_kprintf(" ");
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%c", __is_print(buf[i + j]) ? buf[i + j] : '.');
+        rt_kprintf("\n");
+    }
+}
+#endif
+
+/**
+  * @brief  This function get order from sdio.
+  * @param  data
+  * @retval sdio order
+  */
+static int get_order(rt_uint32_t data)
+{
+    int order = 0;
+
+    switch (data)
+    {
+    case 1:
+        order = 0;
+        break;
+    case 2:
+        order = 1;
+        break;
+    case 4:
+        order = 2;
+        break;
+    case 8:
+        order = 3;
+        break;
+    case 16:
+        order = 4;
+        break;
+    case 32:
+        order = 5;
+        break;
+    case 64:
+        order = 6;
+        break;
+    case 128:
+        order = 7;
+        break;
+    case 256:
+        order = 8;
+        break;
+    case 512:
+        order = 9;
+        break;
+    case 1024:
+        order = 10;
+        break;
+    case 2048:
+        order = 11;
+        break;
+    case 4096:
+        order = 12;
+        break;
+    case 8192:
+        order = 13;
+        break;
+    case 16384:
+        order = 14;
+        break;
+    default :
+        order = 0;
+        break;
+    }
+    return order;
+}
+
+/**
+  * @brief  This function wait sdio cmd completed.
+  * @param  sdio rthw_sdio
+  * @retval None
+  */
+static void rthw_sdio_wait_completed(struct rthw_sdio *sdio)
+{
+    rt_uint32_t status;
+    struct rt_mmcsd_cmd *cmd = sdio->pkg->cmd;
+    struct rt_mmcsd_data *data = cmd->data;
+    struct stm32_sdio *hw_sdio = sdio->sdio_des.hw_sdio;
+
+    if (rt_event_recv(&sdio->event, 0xffffffff, RT_EVENT_FLAG_OR | RT_EVENT_FLAG_CLEAR,
+                      rt_tick_from_millisecond(5000), &status) != RT_EOK)
+    {
+        LOG_E("wait cmd completed timeout");
+        cmd->err = -RT_ETIMEOUT;
+        return;
+    }
+
+    if (sdio->pkg == RT_NULL)
+    {
+        return;
+    }
+    
+    cmd->resp[0] = hw_sdio->resp1;
+    cmd->resp[1] = hw_sdio->resp2;
+    cmd->resp[2] = hw_sdio->resp3;
+    cmd->resp[3] = hw_sdio->resp4;
+
+    if (status & SDMMC_ERRORS)
+    {
+        if ((status & SDMMC_STA_CCRCFAIL) && (resp_type(cmd) & (RESP_R3 | RESP_R4)))
+        {
+            cmd->err = RT_EOK;
+        }
+        else
+        {
+            cmd->err = -RT_ERROR;
+        }
+        
+        if (status & SDMMC_STA_CTIMEOUT)
+        {
+            cmd->err = -RT_ETIMEOUT;
+        }
+        
+        if (status & SDMMC_STA_DCRCFAIL)
+        {
+            data->err = -RT_ERROR;
+        }
+        
+        if (status & SDMMC_STA_DTIMEOUT)
+        {
+            data->err = -RT_ETIMEOUT;
+        }
+        
+        if (cmd->err == RT_EOK)
+        {
+            LOG_D("sta:0x%08X [%08X %08X %08X %08X]", status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+        }
+        else
+        {
+            LOG_D("err:0x%08x, %s%s%s%s%s%s%s cmd:%d arg:0x%08x rw:%c len:%d blksize:%d",
+                  status,
+                  status & SDMMC_STA_CCRCFAIL  ? "CCRCFAIL "    : "",
+                  status & SDMMC_STA_DCRCFAIL  ? "DCRCFAIL "    : "",
+                  status & SDMMC_STA_CTIMEOUT  ? "CTIMEOUT "    : "",
+                  status & SDMMC_STA_DTIMEOUT  ? "DTIMEOUT "    : "",
+                  status & SDMMC_STA_TXUNDERR  ? "TXUNDERR "    : "",
+                  status & SDMMC_STA_RXOVERR   ? "RXOVERR "     : "",
+                  status == 0                   ? "NULL"         : "",
+                  cmd->cmd_code,
+                  cmd->arg,
+                  data ? (data->flags & DATA_DIR_WRITE ?  'w' : 'r') : '-',
+                  data ? data->blks * data->blksize : 0,
+                  data ? data->blksize : 0
+                 );
+        }
+        
+    }
+    else
+    {
+        cmd->err = RT_EOK;
+        LOG_D("sta:0x%08X [%08X %08X %08X %08X]", status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+    }
+}
+
+/**
+  * @brief  This function send command.
+  * @param  sdio rthw_sdio
+  * @param  pkg  sdio package
+  * @retval None
+  */
+static void rthw_sdio_send_command(struct rthw_sdio *sdio, struct sdio_pkg *pkg)
+{
+    struct rt_mmcsd_cmd *cmd = pkg->cmd;
+    struct rt_mmcsd_data *data = cmd->data;
+    struct stm32_sdio *hw_sdio = sdio->sdio_des.hw_sdio;
+    rt_uint32_t reg_cmd;
+    
+    sdio->pkg = pkg;
+
+    LOG_D("CMD:%d ARG:0x%08x RES:%s%s%s%s%s%s%s%s%s rw:%c len:%d blksize:%d\n",
+          cmd->cmd_code,
+          cmd->arg,
+          resp_type(cmd) == RESP_NONE ? "NONE"  : "",
+          resp_type(cmd) == RESP_R1  ? "R1"  : "",
+          resp_type(cmd) == RESP_R1B ? "R1B"  : "",
+          resp_type(cmd) == RESP_R2  ? "R2"  : "",
+          resp_type(cmd) == RESP_R3  ? "R3"  : "",
+          resp_type(cmd) == RESP_R4  ? "R4"  : "",
+          resp_type(cmd) == RESP_R5  ? "R5"  : "",
+          resp_type(cmd) == RESP_R6  ? "R6"  : "",
+          resp_type(cmd) == RESP_R7  ? "R7"  : "",
+          data ? (data->flags & DATA_DIR_WRITE ?  'w' : 'r') : '-',
+          data ? data->blks * data->blksize : 0,
+          data ? data->blksize : 0
+         );
+
+    /* config cmd reg */
+    reg_cmd = cmd->cmd_code | SDMMC_CMD_CPSMEN;
+    if (resp_type(cmd) == RESP_NONE)
+    {
+        reg_cmd |= SDMMC_RESPONSE_NO;
+    }
+    else if (resp_type(cmd) == RESP_R2)
+    {
+        reg_cmd |= SDMMC_RESPONSE_LONG;
+    }
+    else
+    {
+        reg_cmd |= SDMMC_RESPONSE_SHORT;
+    }
+    hw_sdio->mask |= SDIO_MASKR_ALL;
+        
+    /* data pre configuration */
+    if (data != RT_NULL)
+    {
+        hw_sdio->dctrl = 0;
+        hw_sdio->mask &= ~(SDMMC_MASK_CMDRENDIE | SDMMC_MASK_CMDSENTIE);
+        reg_cmd |= SDMMC_CMD_CMDTRANS;
+        hw_sdio->dtimer = HW_SDIO_DATATIMEOUT;
+        hw_sdio->dlen   = data->blks * data->blksize;
+        hw_sdio->dctrl  = (get_order(data->blksize)<<4) | (data->flags & DATA_DIR_READ ? SDMMC_DCTRL_DTDIR : 0);
+        hw_sdio->idmabase0r = (rt_uint32_t)cache_buf;
+        hw_sdio->idmatrlr = SDMMC_ENABLE_IDMA_SINGLE_BUFF;
+    }
+
+    hw_sdio->arg = cmd->arg;
+    hw_sdio->cmd = reg_cmd;
+    /* wait completed */
+    rthw_sdio_wait_completed(sdio);
+
+    /* Waiting for data to be sent to completion */
+    if (data != RT_NULL)
+    {
+        volatile rt_uint32_t count = SDIO_TX_RX_COMPLETE_TIMEOUT_LOOPS;
+
+        while (count && (hw_sdio->sta & SDMMC_STA_DPSMACT))
+        {
+            count--;
+        }
+        if ((count == 0) || (hw_sdio->sta & SDMMC_ERRORS))
+        {
+            cmd->err = -RT_ERROR;
+        }
+    }
+
+    /* data post configuration */
+    if (data != RT_NULL)
+    {
+        if (data->flags & DATA_DIR_READ)
+        {
+#if defined(EMMC_RX_DUMP)
+            rt_kprintf("\nEMMC Rx:\n");
+            dump_hex(cache_buf, data->blks * data->blksize);
+#endif            
+            rt_memcpy(data->buf, cache_buf, data->blks * data->blksize);
+        }
+    }
+}
+
+/**
+  * @brief  This function send sdio request.
+  * @param  sdio  rthw_sdio
+  * @param  req   request
+  * @retval None
+  */
+static void rthw_sdio_request(struct rt_mmcsd_host *host, struct rt_mmcsd_req *req)
+{
+    struct sdio_pkg pkg;
+    struct rthw_sdio *sdio = host->private_data;
+    struct rt_mmcsd_data *data;
+
+    RTHW_SDIO_LOCK(sdio);
+    
+    if (req->cmd != RT_NULL)
+    {
+        rt_memset(&pkg, 0, sizeof(pkg));
+        data = req->cmd->data;
+        pkg.cmd = req->cmd;
+
+        if (data != RT_NULL)
+        {
+            rt_uint32_t size = data->blks * data->blksize;
+
+            RT_ASSERT(size <= SDIO_BUFF_SIZE);
+
+            if (data->flags & DATA_DIR_WRITE)
+            {
+#if defined(EMMC_TX_DUMP)
+            rt_kprintf("\nEMMC Tx:\n");
+            dump_hex(cache_buf, data->blks * data->blksize);
+#endif   
+                rt_memcpy(cache_buf, data->buf, size);
+            }
+        }
+
+        rthw_sdio_send_command(sdio, &pkg);
+    }
+
+    if (req->stop != RT_NULL)
+    {
+        rt_memset(&pkg, 0, sizeof(pkg));
+        pkg.cmd = req->stop;
+        rthw_sdio_send_command(sdio, &pkg);
+    }
+
+    RTHW_SDIO_UNLOCK(sdio);
+    
+    mmcsd_req_complete(sdio->host);
+}
+
+
+/**
+  * @brief  This function interrupt process function.
+  * @param  host  rt_mmcsd_host
+  * @retval None
+  */
+void rthw_sdio_irq_process(struct rt_mmcsd_host *host)
+{
+    struct rthw_sdio *sdio = host->private_data;
+    struct stm32_sdio *hw_sdio = sdio->sdio_des.hw_sdio;
+    rt_uint32_t intstatus = hw_sdio->sta;
+
+    /* clear irq flag*/
+    hw_sdio->icr = intstatus;
+
+    rt_event_send(&sdio->event, intstatus);
+}
+
+/**
+  * @brief  This function config sdio.
+  * @param  host    rt_mmcsd_host
+  * @param  io_cfg  rt_mmcsd_io_cfg
+  * @retval None
+  */
+static void rthw_sdio_iocfg(struct rt_mmcsd_host *host, struct rt_mmcsd_io_cfg *io_cfg)
+{
+    rt_uint32_t temp, clk_src;
+    rt_uint32_t clk = io_cfg->clock;
+    struct rthw_sdio *sdio = host->private_data;
+    struct stm32_sdio *hw_sdio = sdio->sdio_des.hw_sdio;
+
+    LOG_D("clk:%dK width:%s%s%s power:%s%s%s",
+          clk/1000,
+          io_cfg->bus_width == MMCSD_BUS_WIDTH_8 ? "8" : "",
+          io_cfg->bus_width == MMCSD_BUS_WIDTH_4 ? "4" : "",
+          io_cfg->bus_width == MMCSD_BUS_WIDTH_1 ? "1" : "",
+          io_cfg->power_mode == MMCSD_POWER_OFF ? "OFF" : "",
+          io_cfg->power_mode == MMCSD_POWER_UP ? "UP" : "",
+          io_cfg->power_mode == MMCSD_POWER_ON ? "ON" : ""
+         );
+
+    RTHW_SDIO_LOCK(sdio);
+    
+    clk_src = EMMC_CLOCK_FREQ;
+
+    if (clk > 0)
+    {
+        if (clk > host->freq_max)
+        {
+            clk = host->freq_max;
+        }
+        temp = DIV_ROUND_UP(clk_src, 2 * clk);
+        if (temp > 0x3FF)
+        {
+            temp = 0x3FF;
+        }
+    }
+
+    if (io_cfg->bus_width == MMCSD_BUS_WIDTH_8)
+    {
+        temp |= SDMMC_BUS_WIDE_8B;
+    }
+    else if (io_cfg->bus_width == MMCSD_BUS_WIDTH_4)
+    {
+        temp |= SDMMC_BUS_WIDE_4B;
+    }
+    else
+    {
+        temp |= SDMMC_BUS_WIDE_1B;
+    }
+    
+    hw_sdio->clkcr = temp;
+
+    if (io_cfg->power_mode == MMCSD_POWER_ON)
+        hw_sdio->power |= SDMMC_POWER_PWRCTRL;
+    
+    RTHW_SDIO_UNLOCK(sdio);
+}
+
+static const struct rt_mmcsd_host_ops ops =
+{
+    rthw_sdio_request,
+    rthw_sdio_iocfg,
+    RT_NULL,
+    RT_NULL,
+};
+
+/**
+  * @brief  This function create mmcsd host.
+  * @param  sdio_des stm32_sdio_des
+  * @retval rt_mmcsd_host
+  */
+struct rt_mmcsd_host *sdio_host_create(struct stm32_sdio_des *sdio_des)
+{
+    struct rt_mmcsd_host *host;
+    struct rthw_sdio *sdio = RT_NULL;
+
+    if (sdio_des == RT_NULL)
+    {
+        return RT_NULL;
+    }
+
+    sdio = rt_malloc(sizeof(struct rthw_sdio));
+    if (sdio == RT_NULL)
+    {
+        LOG_E("malloc rthw_sdio fail");
+        return RT_NULL;
+    }
+    rt_memset(sdio, 0, sizeof(struct rthw_sdio));
+
+    host = mmcsd_alloc_host();
+    if (host == RT_NULL)
+    {
+        LOG_E("alloc host fail");
+        goto err;
+    }
+
+    rt_memcpy(&sdio->sdio_des, sdio_des, sizeof(struct stm32_sdio_des));
+
+    sdio->sdio_des.hw_sdio = (struct stm32_sdio *)EMMC_BASE_ADDRESS;
+
+    rt_event_init(&sdio->event, "sdio", RT_IPC_FLAG_FIFO);
+    rt_mutex_init(&sdio->mutex, "sdio", RT_IPC_FLAG_FIFO);
+    /* set host default attributes */
+    host->ops = &ops;
+    host->freq_min  = 400 * 1000;
+    host->freq_max  = EMMC_MAX_FREQ;
+    host->valid_ocr = 0X00FFFF80; /* The voltage range supported is 1.65v-3.6v */
+    host->flags = MMCSD_BUSWIDTH_8 | MMCSD_MUTBLKWRITE | MMCSD_SUP_HIGHSPEED;
+    host->max_seg_size  = SDIO_BUFF_SIZE;
+    host->max_dma_segs  = 1;
+    host->max_blk_size  = 512;
+    host->max_blk_count = 512;
+
+    /* link up host and sdio */
+    sdio->host = host;
+    host->private_data = sdio;
+
+    /* ready to change */
+    mmcsd_change(host);
+
+    return host;
+
+err:
+    if (sdio)
+    {
+        rt_free(sdio);
+    }
+    
+    return RT_NULL;
+}
+
+void SDMMC2_IRQHandler(void)
+{
+    rt_interrupt_enter();
+    /* Process All SDIO Interrupt Sources */
+    rthw_sdio_irq_process(host);
+    
+    rt_interrupt_leave();
+}
+
+int rt_hw_sdio_init(void)
+{
+    struct stm32_sdio_des sdio_des;
+    
+    hsd.Instance = SDMMC2;
+    HAL_SD_MspInit(&hsd);
+
+    host = sdio_host_create(&sdio_des);
+    if (host == RT_NULL)
+    {
+        LOG_E("host create fail");
+        return RT_NULL;
+    }
+    return 0;
+}
+INIT_DEVICE_EXPORT(rt_hw_sdio_init);
+
+#if defined(EMMC_USING_DFS)
+int mnt_init(void)
+{
+    rt_device_t sd = RT_NULL;
+    
+#if defined(EMMC_RX_DUMP) || defined(EMMC_TX_DUMP)
+    rt_thread_delay(3000);
+#else
+    rt_thread_delay(RT_TICK_PER_SECOND);
+#endif
+    
+    sd = rt_device_find("sd0");
+    if (sd == RT_NULL)
+    {
+        rt_kprintf("can't find emmc device!\n");
+        return RT_ERROR;
+    }
+    
+    if (dfs_mount("sd0", "/", "elm", 0, 0) != 0)
+    {
+        rt_kprintf("file system mount failed!\n");
+    }
+    else
+    {
+        rt_kprintf("file system mount success!\n");
+    }
+
+    return 0;
+}
+INIT_APP_EXPORT(mnt_init);
+#endif
+
+#endif /* BSP_USING_SDMMC */
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.h b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.h
new file mode 100644
index 0000000000..bd385cbb14
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_emmc.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-07-16     thread-liu   first version
+ */
+
+#ifndef __DRV_EMMC_H__
+#define __DRV_EMMC_H__
+
+#include <rtthread.h>
+#include "rtdevice.h"
+#include <rthw.h>
+#include <drv_common.h>
+#include <string.h>
+#include <drivers/mmcsd_core.h>
+#include <drivers/sdio.h>
+
+#define SDIO_BUFF_SIZE       4096
+
+#ifndef EMMC_BASE_ADDRESS
+#define EMMC_BASE_ADDRESS    (SDMMC2)
+#endif
+
+#ifndef EMMC_CLOCK_FREQ
+#define EMMC_CLOCK_FREQ      (99U * 1000 * 1000)
+#endif
+
+#ifndef EMMC_MAX_FREQ
+#define EMMC_MAX_FREQ        (50 * 1000 * 1000)
+#endif
+
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+
+#define SDMMC_ERRORS \
+    (SDMMC_STA_IDMATE | SDMMC_STA_ACKTIMEOUT | \
+     SDMMC_STA_RXOVERR | SDMMC_STA_TXUNDERR | \
+     SDMMC_STA_DTIMEOUT | SDMMC_STA_CTIMEOUT | \
+     SDMMC_STA_DCRCFAIL | SDMMC_STA_CCRCFAIL)
+
+#define SDIO_MASKR_ALL \
+    (SDMMC_MASK_CCRCFAILIE | SDMMC_MASK_DCRCFAILIE | SDMMC_MASK_CTIMEOUTIE | \
+     SDMMC_MASK_TXUNDERRIE | SDMMC_MASK_RXOVERRIE | SDMMC_MASK_CMDRENDIE | \
+     SDMMC_MASK_CMDSENTIE | SDMMC_MASK_DATAENDIE | SDMMC_MASK_ACKTIMEOUTIE)
+
+#define HW_SDIO_DATATIMEOUT                 (0xFFFFFFFFU)
+
+struct stm32_sdio
+{
+    volatile rt_uint32_t power;         /* offset 0x00 */
+    volatile rt_uint32_t clkcr;         /* offset 0x04 */
+    volatile rt_uint32_t arg;           /* offset 0x08 */
+    volatile rt_uint32_t cmd;           /* offset 0x0C */
+    volatile rt_uint32_t respcmd;       /* offset 0x10 */
+    volatile rt_uint32_t resp1;         /* offset 0x14 */
+    volatile rt_uint32_t resp2;         /* offset 0x18 */
+    volatile rt_uint32_t resp3;         /* offset 0x1C */
+    volatile rt_uint32_t resp4;         /* offset 0x20 */
+    volatile rt_uint32_t dtimer;        /* offset 0x24 */
+    volatile rt_uint32_t dlen;          /* offset 0x28 */
+    volatile rt_uint32_t dctrl;         /* offset 0x2C */
+    volatile rt_uint32_t dcount;        /* offset 0x30 */
+    volatile rt_uint32_t sta;           /* offset 0x34 */
+    volatile rt_uint32_t icr;           /* offset 0x38 */
+    volatile rt_uint32_t mask;          /* offset 0x3C */
+    volatile rt_uint32_t acktimer;      /* offset 0x40 */
+    volatile rt_uint32_t reserved0[3];  /* offset 0x44 ~ 0x4C */
+    volatile rt_uint32_t idmatrlr;      /* offset 0x50 */
+    volatile rt_uint32_t idmabsizer;    /* offset 0x54 */
+    volatile rt_uint32_t idmabase0r;    /* offset 0x58 */
+    volatile rt_uint32_t idmabase1r;    /* offset 0x5C */
+    volatile rt_uint32_t reserved1[1];  /* offset 0x60 */
+    volatile rt_uint32_t idmalar;
+    volatile rt_uint32_t idmabar;
+    volatile rt_uint32_t reserved2[5];
+    volatile rt_uint32_t fifo;          
+    volatile rt_uint32_t reserved3[220];
+    volatile rt_uint32_t verr;
+    volatile rt_uint32_t ipidr;
+    volatile rt_uint32_t sidr;
+};
+
+typedef rt_uint32_t (*sdio_clk_get)(struct stm32_sdio *hw_sdio);
+
+struct stm32_sdio_des
+{
+    struct stm32_sdio *hw_sdio;
+    sdio_clk_get clk_get;
+};
+
+/* stm32 sdio dirver class */
+struct stm32_sdio_class
+{
+    struct stm32_sdio_des *des;
+    const struct stm32_sdio_config *cfg;
+    struct rt_mmcsd_host host;
+};
+
+extern void stm32_mmcsd_change(void);
+
+#endif /* __DRV_SDIO_H__ */
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_pmic.c b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_pmic.c
index 4623f41923..aeabf5e716 100644
--- a/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_pmic.c
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_pmic.c
@@ -19,6 +19,8 @@
 #define LOG_TAG              "drv.pmic"
 #include <drv_log.h>
 
+#define I2C_NAME "i2c3"
+
 static struct rt_i2c_bus_device *pmic_dev = RT_NULL;
 
 /* i2c read reg */
@@ -884,7 +886,7 @@ static int pmic_init(void)
     {
         BSP_PMIC_MspInit();
         
-        result = rt_hw_pmic_init("i2c3");
+        result = rt_hw_pmic_init(I2C_NAME);
         if(result != RT_EOK)
         {
             LOG_D("stpmic init failed: %02x", result);
diff --git a/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_sdcard.c b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_sdcard.c
new file mode 100644
index 0000000000..ca79b806d7
--- /dev/null
+++ b/bsp/stm32/stm32mp157a-st-ev1/board/ports/drv_sdcard.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-07-04     thread-liu        the first version
+ */
+
+#include "board.h"
+
+#if defined(BSP_USING_SD_CARD)
+#include <dfs_fs.h>
+
+#define DRV_DEBUG
+//#define SDMMC_TX_DUMP
+//#define SDMMC_RX_DUMP
+#define LOG_TAG             "drv.sdmmc"
+#include <drv_log.h>
+
+static SD_HandleTypeDef        SDCARD_Handler = {0};
+static HAL_SD_CardInfoTypeDef  SDCardInfo     = {0};
+
+struct stm32_sd
+{
+    struct rt_device sdcard;
+    struct rt_semaphore sd_lock;
+    volatile rt_uint8_t write_flage;
+    volatile rt_uint8_t read_flage;
+    volatile rt_base_t level;    
+};
+static struct stm32_sd sd_device;
+
+#define SD_TIMEOUT      ((uint32_t)30 * 1000)
+#define DETECT_PIN      GET_PIN(G, 1)
+#define LDO_PIN         GET_PIN(F, 14)
+
+struct rt_completion tx_comp;
+struct rt_completion rx_comp;
+
+/* SYSRAM SDMMC1/2 accesses */
+#define SDIO_BUFF_SIZE       512
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+__attribute__((at(0x2FFC0000)))
+#elif defined ( __GNUC__ )
+__attribute__((at(0x2FFC0000)))
+#elif defined(__ICCARM__)
+#pragma location = 0x2FFC0000
+#endif
+static rt_uint32_t cache_buf[SDIO_BUFF_SIZE];
+
+#if defined(SDMMC_RX_DUMP) || defined(SDMMC_TX_DUMP)
+#define __is_print(ch) ((unsigned int)((ch) - ' ') < 127u - ' ')
+static void dump_hex(const rt_uint8_t *ptr, rt_size_t buflen)
+{
+    unsigned char *buf = (unsigned char *)ptr;
+    int i, j;
+
+    for (i = 0; i < buflen; i += 16)
+    {
+        rt_kprintf("%08X: ", i);
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%02X ", buf[i + j]);
+            else
+                rt_kprintf("   ");
+        rt_kprintf(" ");
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%c", __is_print(buf[i + j]) ? buf[i + j] : '.');
+        rt_kprintf("\n");
+    }
+}
+#endif
+
+static rt_err_t rt_hw_sd_is_detected(void)
+{
+   return rt_pin_read(DETECT_PIN); 
+}
+
+static rt_err_t rt_hw_sd_init(void)
+{
+    /* sd ldo*/
+    rt_pin_mode(LDO_PIN, PIN_MODE_OUTPUT);
+    /* sd detect */
+    rt_pin_mode(DETECT_PIN, PIN_MODE_INPUT_PULLUP);
+    /* judge we have a sd card */
+    if (rt_hw_sd_is_detected() != 0x00)
+    {
+        LOG_E("can't find sd card!");
+        return RT_ERROR;
+    }
+    
+    SDCARD_Handler.Instance = SDMMC1;
+    HAL_SD_DeInit(&SDCARD_Handler);
+    
+  /* if CLKDIV = 0 then SDMMC Clock frequency = SDMMC Kernel Clock
+     else SDMMC Clock frequency = SDMMC Kernel Clock / [2 * CLKDIV]. 
+     SDMMC Kernel Clock = 99MHz, SDMMC Clock frequency = 50MHz  */
+    
+    SDCARD_Handler.Init.ClockDiv             = 1;
+    SDCARD_Handler.Init.ClockPowerSave       = SDMMC_CLOCK_POWER_SAVE_DISABLE;      
+    SDCARD_Handler.Init.ClockEdge            = SDMMC_CLOCK_EDGE_FALLING;             
+    SDCARD_Handler.Init.HardwareFlowControl  = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; 
+    SDCARD_Handler.Init.BusWide              = SDMMC_BUS_WIDE_4B;                                    
+    
+    if (HAL_SD_Init(&SDCARD_Handler) != RT_EOK)
+    {
+        LOG_E("sd device init error!");
+        return RT_ERROR; 
+    }
+
+    if (HAL_SD_ConfigWideBusOperation(&SDCARD_Handler, SDMMC_BUS_WIDE_4B) != RT_EOK)
+    {
+        LOG_E("sd bus config error!");
+        return RT_ERROR;   
+    }
+
+    if (HAL_SD_GetCardInfo(&SDCARD_Handler, &SDCardInfo) != RT_EOK)
+    {
+        LOG_E("sd get card info error!");
+        return RT_ERROR;    
+    }
+    
+    rt_thread_mdelay(100);
+    
+    if(HAL_SD_GetCardState(&SDCARD_Handler) != HAL_SD_CARD_TRANSFER)
+    {
+        LOG_E("sd get card state error!");
+        return RT_ERROR; 
+    }
+    
+    return RT_EOK;
+}
+
+static void rt_hw_sd_deinit(void)
+{
+    HAL_SD_DeInit(&SDCARD_Handler);
+}
+
+static rt_err_t sdcard_wait_ok(void)
+{
+    rt_uint32_t tick_start = 0;
+    
+    tick_start = rt_tick_get();
+    while ((rt_tick_get() - tick_start) < SD_TIMEOUT)
+    {
+        if (HAL_SD_GetCardState(&SDCARD_Handler) == HAL_SD_CARD_TRANSFER)
+        {
+            return HAL_OK;
+        }
+    }
+    return HAL_ERROR;
+}
+
+void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status)
+{
+    if (status == SET)
+    {
+        rt_pin_write(LDO_PIN, PIN_HIGH);
+    }
+    else
+    {
+        rt_pin_write(LDO_PIN, PIN_LOW);
+    } 
+}
+
+static rt_err_t rt_sdcard_init(rt_device_t dev)
+{
+    RT_ASSERT(dev != RT_NULL);
+    struct stm32_sd *sd = (struct stm32_sd *)dev;
+    
+    if (rt_sem_init(&sd->sd_lock, "sdlock", 1, RT_IPC_FLAG_FIFO) != RT_EOK)
+    {
+        LOG_E("init sd lock semaphore failed\n");
+    }
+    
+    return RT_EOK;
+}
+
+static rt_err_t rt_sdcard_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    RT_ASSERT(dev != RT_NULL);
+    return RT_EOK;
+}
+
+static rt_err_t rt_sdcard_close(rt_device_t dev)
+{
+    RT_ASSERT(dev != RT_NULL);
+    return RT_EOK;
+}
+
+/**
+  * @brief  Reads Sector(s)
+  * @param  dev : sd dev
+  * @param  sector: Sector address (LBA) Data buffer to store read data
+  * @param  *buffer: Data buffer to store read data
+  * @param  count: Number of sectors to read (1..128)
+  * @retval DRESULT: Operation result
+  */
+
+static rt_size_t rt_sdcard_read(rt_device_t dev, rt_off_t sector, void *buffer, rt_size_t count)
+{
+    RT_ASSERT(dev != RT_NULL);
+    struct stm32_sd *sd = (struct stm32_sd *)dev;
+    
+    rt_uint8_t ret = RT_EOK;
+    volatile uint32_t tickstart = 0;
+    sd->read_flage  = 0;
+    
+    rt_memset(cache_buf, 0x00, BLOCKSIZE * count);
+    
+    ret = sdcard_wait_ok();
+    if (ret != RT_EOK)
+    {
+        LOG_D("sdmmc busy!");
+        return 0;
+    }
+    
+    rt_sem_take(&sd->sd_lock, RT_WAITING_FOREVER);
+    ret = HAL_SD_ReadBlocks_DMA(&SDCARD_Handler, (rt_uint8_t *)cache_buf, (uint32_t)sector, count);
+    rt_sem_release(&sd->sd_lock);
+    
+    /* Wait that writing process is completed or a timeout occurs */
+    tickstart = rt_tick_get();
+    if (ret == HAL_OK)
+    {
+        while ((sd->read_flage == 0) && (rt_tick_get() - tickstart) < SD_TIMEOUT)
+        {
+        }
+        /* over time */
+        if (sd->read_flage == 0)
+        {
+            return 0;
+        }
+        else
+        {
+          sd->read_flage = 0;
+          tickstart = rt_tick_get();
+          while ((rt_tick_get() - tickstart) < SD_TIMEOUT)
+          {
+              if (sdcard_wait_ok() == RT_EOK)
+              {
+                 sd->level=rt_hw_interrupt_disable();
+                 rt_memcpy((rt_uint8_t *)(buffer), cache_buf, BLOCKSIZE * count);
+                 rt_hw_interrupt_enable(sd->level); 
+#if defined(SDMMC_RX_DUMP)
+                rt_kprintf("\nsd rx: \n");
+                dump_hex(cache_buf, BLOCKSIZE * count);
+#endif
+                 return count;
+              }
+          }
+        }
+    }
+    
+    return 0;
+}
+
+/**
+  * @brief  Writes block(s) to a specified address in an SD card, in DMA mode.
+  * @param  dev        SD device
+  * @param  sector     Block index from where data is to be written P
+  * @param  *buffer    Pointer to the buffer that will contain the data to transmit
+  * @param  count      Number of SD blocks to write
+  * @retval BSP status
+  */
+static rt_size_t rt_sdcard_write(rt_device_t dev, rt_off_t sector, const void *buffer, rt_size_t count)
+{
+    RT_ASSERT(dev != RT_NULL);
+    struct stm32_sd *sd = (struct stm32_sd *)dev;
+    rt_uint32_t i = 0;
+    rt_uint8_t ret = RT_EOK;
+    
+    for (i = 0; i < count; i++)
+    {
+        sd->level = rt_hw_interrupt_disable();
+        rt_memset(cache_buf, 0x00, BLOCKSIZE);
+        rt_memcpy(cache_buf, (rt_uint32_t *)((uintptr_t)buffer + BLOCKSIZE * i), BLOCKSIZE);
+        rt_hw_interrupt_enable(sd->level);
+        
+#if defined(SDMMC_TX_DUMP)
+        rt_kprintf("\nsd tx: \n");
+        dump_hex(cache_buf, BLOCKSIZE);
+#endif
+        ret = sdcard_wait_ok();
+        if (ret != RT_EOK)
+        {
+            LOG_D("sdmmc busy!");
+            return 0;
+        }
+        rt_completion_init(&tx_comp);
+        ret = HAL_SD_WriteBlocks_DMA(&SDCARD_Handler, (rt_uint8_t *)cache_buf, (rt_uint32_t)(sector + i),  1);
+        if (ret != HAL_OK)
+        {
+            rt_kprintf("sd write error!\n");
+            return 0;
+        }
+        rt_completion_wait(&tx_comp,RT_WAITING_FOREVER);
+
+    }
+    
+    return count;
+}
+
+static rt_err_t rt_sdcard_control(rt_device_t dev, int cmd, void *args)
+{
+    RT_ASSERT(dev != RT_NULL);
+    
+    if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
+    {
+        struct rt_device_blk_geometry *geometry;
+
+        geometry = (struct rt_device_blk_geometry *)args;
+
+        geometry->bytes_per_sector = 512;
+        geometry->block_size       = SDCARD_Handler.SdCard.BlockSize;
+        geometry->sector_count     = SDCARD_Handler.SdCard.BlockNbr;
+    }
+
+    return RT_EOK;
+}
+
+void SDMMC1_IRQHandler(void)
+{
+    rt_interrupt_enter();
+
+    HAL_SD_IRQHandler(&SDCARD_Handler);
+
+    rt_interrupt_leave();
+}
+
+void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd)
+{
+    if (hsd->Instance == SDCARD_Handler.Instance)
+    {
+        sd_device.read_flage = 1;
+    }
+}
+
+void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd)
+{
+    if (hsd->Instance == SDCARD_Handler.Instance)
+    {
+        rt_completion_done(&tx_comp);
+    }
+}
+
+int rt_hw_sdcard_init(void)
+{
+    if (rt_hw_sd_init() != RT_EOK)
+    {
+        rt_hw_sd_deinit();
+        LOG_E("sdcard init failed");
+
+        return RT_ERROR;
+    }
+    /* register sdcard device */
+    sd_device.sdcard.type    = RT_Device_Class_Block;
+    sd_device.sdcard.init    = rt_sdcard_init;
+    sd_device.sdcard.open    = rt_sdcard_open;
+    sd_device.sdcard.close   = rt_sdcard_close;
+    sd_device.sdcard.read    = rt_sdcard_read;
+    sd_device.sdcard.write   = rt_sdcard_write;
+    sd_device.sdcard.control = rt_sdcard_control;
+
+    /* no private */
+    sd_device.sdcard.user_data = &SDCardInfo;
+
+    rt_device_register(&sd_device.sdcard, "sd_card", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE);
+    
+    LOG_I("sd card init success!");
+    
+    return RT_EOK;
+}
+INIT_DEVICE_EXPORT(rt_hw_sdcard_init);
+
+#if defined(SD_USING_DFS)
+int mnt_init(void)
+{
+    rt_device_t sd_dev = RT_NULL;
+    
+    LOG_I("init sd card file system.");
+#if defined(SDMMC_RX_DUMP) || defined(SDMMC_TX_DUMP)
+    rt_thread_delay(3000);
+#else
+    rt_thread_delay(RT_TICK_PER_SECOND);
+#endif
+    sd_dev = rt_device_find("sd_card");
+    if (sd_dev == RT_NULL)
+    {
+        LOG_E("can't find sd deivce name!");
+        return RT_ERROR;
+    }
+    
+    if (dfs_mount("sd_card", "/", "elm", 0, 0) != 0)
+    {
+        rt_kprintf("file system mount failed!\n");
+    }
+    else
+    {
+        rt_kprintf("file system mount success!\n");
+    }
+
+    return 0;
+}
+INIT_APP_EXPORT(mnt_init);
+#endif
+
+#endif